From 98b94b6e38ca0c4eeb29949c656f6a315000c23e Mon Sep 17 00:00:00 2001 From: Frieder Schrempf Date: Mon, 22 Feb 2021 12:52:20 +0100 Subject: regulator: pca9450: Clear PRESET_EN bit to fix BUCK1/2/3 voltage setting The driver uses the DVS registers PCA9450_REG_BUCKxOUT_DVS0 to set the voltage for the buck regulators 1, 2 and 3. This has no effect as the PRESET_EN bit is set by default and therefore the preset values are used instead, which are set to 850 mV. To fix this we clear the PRESET_EN bit at time of initialization. Fixes: 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver") Cc: Signed-off-by: Frieder Schrempf Link: https://lore.kernel.org/r/20210222115229.166620-1-frieder.schrempf@kontron.de Signed-off-by: Mark Brown --- drivers/regulator/pca9450-regulator.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/regulator/pca9450-regulator.c') diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c index 89b806be399f..2f7ee212cb8c 100644 --- a/drivers/regulator/pca9450-regulator.c +++ b/drivers/regulator/pca9450-regulator.c @@ -797,6 +797,14 @@ static int pca9450_i2c_probe(struct i2c_client *i2c, return ret; } + /* Clear PRESET_EN bit in BUCK123_DVS to use DVS registers */ + ret = regmap_clear_bits(pca9450->regmap, PCA9450_REG_BUCK123_DVS, + BUCK123_PRESET_EN); + if (ret) { + dev_err(&i2c->dev, "Failed to clear PRESET_EN bit: %d\n", ret); + return ret; + } + /* Set reset behavior on assertion of WDOG_B signal */ ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_RESET_CTRL, WDOG_B_CFG_MASK, WDOG_B_CFG_COLD_LDO12); -- cgit v1.2.3