From 160f8d0691659b65a97494c151c95b1287c377ae Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Tue, 15 Sep 2015 16:26:20 +0300 Subject: spi: omap-uwire: Remove needless bits_per_word and speed_hz tests SPI core validates both bits_per_word and speed_hz transfer parameters and defaults to spi->bits_per_word and spi->max_speed_hz in case these per transfer parameters are not set. This allows to remove two needless tests from uwire_txrx() and uwire_setup_transfer(). Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- drivers/spi/spi-omap-uwire.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c index 55576db31549..ce8dbdbce312 100644 --- a/drivers/spi/spi-omap-uwire.c +++ b/drivers/spi/spi-omap-uwire.c @@ -205,7 +205,7 @@ static void uwire_chipselect(struct spi_device *spi, int value) static int uwire_txrx(struct spi_device *spi, struct spi_transfer *t) { unsigned len = t->len; - unsigned bits = t->bits_per_word ? : spi->bits_per_word; + unsigned bits = t->bits_per_word; unsigned bytes; u16 val, w; int status = 0; @@ -344,9 +344,10 @@ static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t) /* assume it's already enabled */ rate = clk_get_rate(uwire->ck); - hz = spi->max_speed_hz; - if (t != NULL && t->speed_hz) + if (t != NULL) hz = t->speed_hz; + else + hz = spi->max_speed_hz; if (!hz) { pr_debug("%s: zero speed?\n", dev_name(&spi->dev)); -- cgit v1.2.3 From 76f67ea9bf27b045eacf8f1e148fd13149f51823 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Tue, 15 Sep 2015 16:26:21 +0300 Subject: spi: omap-100k: Rely on validations done by spi core SPI core validates both bits_per_word and speed_hz transfer parameters and defaults to spi->bits_per_word and spi->max_speed_hz in case these per transfer parameters are not set. This allows to remove a few if statements around per transfer bits_per_word and speed_hz tests as they evaluate always to true. Also defaulting word_len to 8 is needless since spi_setup() has already made sure spi->bits_per_word is 8 in case it is not set. Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- drivers/spi/spi-omap-100k.c | 26 ++++++++------------------ 1 file changed, 8 insertions(+), 18 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-omap-100k.c b/drivers/spi/spi-omap-100k.c index 35b332dacb13..76a8425be227 100644 --- a/drivers/spi/spi-omap-100k.c +++ b/drivers/spi/spi-omap-100k.c @@ -244,12 +244,12 @@ static int omap1_spi100k_setup_transfer(struct spi_device *spi, { struct omap1_spi100k *spi100k = spi_master_get_devdata(spi->master); struct omap1_spi100k_cs *cs = spi->controller_state; - u8 word_len = spi->bits_per_word; + u8 word_len; - if (t != NULL && t->bits_per_word) + if (t != NULL) word_len = t->bits_per_word; - if (!word_len) - word_len = 8; + else + word_len = spi->bits_per_word; if (spi->bits_per_word > 32) return -EINVAL; @@ -302,7 +302,6 @@ static int omap1_spi100k_transfer_one_message(struct spi_master *master, struct spi_device *spi = m->spi; struct spi_transfer *t = NULL; int cs_active = 0; - int par_override = 0; int status = 0; list_for_each_entry(t, &m->transfers, transfer_list) { @@ -310,14 +309,9 @@ static int omap1_spi100k_transfer_one_message(struct spi_master *master, status = -EINVAL; break; } - if (par_override || t->speed_hz || t->bits_per_word) { - par_override = 1; - status = omap1_spi100k_setup_transfer(spi, t); - if (status < 0) - break; - if (!t->speed_hz && !t->bits_per_word) - par_override = 0; - } + status = omap1_spi100k_setup_transfer(spi, t); + if (status < 0) + break; if (!cs_active) { omap1_spi100k_force_cs(spi100k, 1); @@ -347,11 +341,7 @@ static int omap1_spi100k_transfer_one_message(struct spi_master *master, } } - /* Restore defaults if they were overriden */ - if (par_override) { - par_override = 0; - status = omap1_spi100k_setup_transfer(spi, NULL); - } + status = omap1_spi100k_setup_transfer(spi, NULL); if (cs_active) omap1_spi100k_force_cs(spi100k, 0); -- cgit v1.2.3 From 4f1474b3b786305d77c93c232f65d40018043e9f Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Tue, 15 Sep 2015 16:26:26 +0300 Subject: spi: pxa2xx: Remove two variables from struct chip_data There is no need to carry spi->max_speed_hz and spi->bits_per_word from setup() in "struct chip_data" since pump_transfers() will anyway take the transfer parameters from "struct spi_transfer". This is since SPI core validates both bits_per_word and speed_hz transfer parameters and defaults to spi->bits_per_word and spi->max_speed_hz in case these per transfer parameters are not set. Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 12 ++---------- drivers/spi/spi-pxa2xx.h | 2 -- 2 files changed, 2 insertions(+), 12 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index fdd791977041..dc6f3f1ceb15 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -921,14 +921,8 @@ static void pump_transfers(unsigned long data) cr0 = chip->cr0; if (transfer->speed_hz || transfer->bits_per_word) { - bits = chip->bits_per_word; - speed = chip->speed_hz; - - if (transfer->speed_hz) - speed = transfer->speed_hz; - - if (transfer->bits_per_word) - bits = transfer->bits_per_word; + bits = transfer->bits_per_word; + speed = transfer->speed_hz; clk_div = pxa2xx_ssp_get_clk_div(drv_data, chip, speed); @@ -1200,7 +1194,6 @@ static int setup(struct spi_device *spi) } clk_div = pxa2xx_ssp_get_clk_div(drv_data, chip, spi->max_speed_hz); - chip->speed_hz = spi->max_speed_hz; chip->cr0 = pxa2xx_configure_sscr0(drv_data, clk_div, spi->bits_per_word); @@ -1251,7 +1244,6 @@ static int setup(struct spi_device *spi) chip->read = u32_reader; chip->write = u32_writer; } - chip->bits_per_word = spi->bits_per_word; spi_set_ctldata(spi, chip); diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h index 0a9b6390a817..0875e985b90d 100644 --- a/drivers/spi/spi-pxa2xx.h +++ b/drivers/spi/spi-pxa2xx.h @@ -98,8 +98,6 @@ struct chip_data { u16 lpss_rx_threshold; u16 lpss_tx_threshold; u8 enable_dma; - u8 bits_per_word; - u32 speed_hz; union { int gpio_cs; unsigned int frm; -- cgit v1.2.3 From 196b0e2cf2373f43d7b0e8c1a63e9d528c06e1df Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Tue, 15 Sep 2015 16:26:27 +0300 Subject: spi: pxa2xx: Remove if statement that is always true in pump_transfers() This is continuation to previous commit by separating unindentation from variable removal done in previous commit. As said SPI core have validated both the speed_hz and bits_per_word and the if statement here evaluates always to true. Remove the test and unindent the code block accordingly. While at it remove also needless "cr0 = chip->cr0" as cr0 will be overwritten anyway and fix block comment style. Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 76 +++++++++++++++++++++++------------------------- 1 file changed, 37 insertions(+), 39 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index dc6f3f1ceb15..ebafd537b59f 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -918,47 +918,45 @@ static void pump_transfers(unsigned long data) drv_data->read = drv_data->rx ? chip->read : null_reader; /* Change speed and bit per word on a per transfer */ - cr0 = chip->cr0; - if (transfer->speed_hz || transfer->bits_per_word) { - - bits = transfer->bits_per_word; - speed = transfer->speed_hz; - - clk_div = pxa2xx_ssp_get_clk_div(drv_data, chip, speed); - - if (bits <= 8) { - drv_data->n_bytes = 1; - drv_data->read = drv_data->read != null_reader ? - u8_reader : null_reader; - drv_data->write = drv_data->write != null_writer ? - u8_writer : null_writer; - } else if (bits <= 16) { - drv_data->n_bytes = 2; - drv_data->read = drv_data->read != null_reader ? - u16_reader : null_reader; - drv_data->write = drv_data->write != null_writer ? - u16_writer : null_writer; - } else if (bits <= 32) { - drv_data->n_bytes = 4; - drv_data->read = drv_data->read != null_reader ? - u32_reader : null_reader; - drv_data->write = drv_data->write != null_writer ? - u32_writer : null_writer; - } - /* if bits/word is changed in dma mode, then must check the - * thresholds and burst also */ - if (chip->enable_dma) { - if (pxa2xx_spi_set_dma_burst_and_threshold(chip, - message->spi, - bits, &dma_burst, - &dma_thresh)) - dev_warn_ratelimited(&message->spi->dev, - "pump_transfers: DMA burst size reduced to match bits_per_word\n"); - } - - cr0 = pxa2xx_configure_sscr0(drv_data, clk_div, bits); + bits = transfer->bits_per_word; + speed = transfer->speed_hz; + + clk_div = pxa2xx_ssp_get_clk_div(drv_data, chip, speed); + + if (bits <= 8) { + drv_data->n_bytes = 1; + drv_data->read = drv_data->read != null_reader ? + u8_reader : null_reader; + drv_data->write = drv_data->write != null_writer ? + u8_writer : null_writer; + } else if (bits <= 16) { + drv_data->n_bytes = 2; + drv_data->read = drv_data->read != null_reader ? + u16_reader : null_reader; + drv_data->write = drv_data->write != null_writer ? + u16_writer : null_writer; + } else if (bits <= 32) { + drv_data->n_bytes = 4; + drv_data->read = drv_data->read != null_reader ? + u32_reader : null_reader; + drv_data->write = drv_data->write != null_writer ? + u32_writer : null_writer; + } + /* + * if bits/word is changed in dma mode, then must check the + * thresholds and burst also + */ + if (chip->enable_dma) { + if (pxa2xx_spi_set_dma_burst_and_threshold(chip, + message->spi, + bits, &dma_burst, + &dma_thresh)) + dev_warn_ratelimited(&message->spi->dev, + "pump_transfers: DMA burst size reduced to match bits_per_word\n"); } + cr0 = pxa2xx_configure_sscr0(drv_data, clk_div, bits); + message->state = RUNNING_STATE; drv_data->dma_mapped = 0; -- cgit v1.2.3 From b69d42b5c44bcfc1c73fe185d4644487f1bd3193 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Tue, 15 Sep 2015 16:26:28 +0300 Subject: spi: pxa2xx: Remove cr0 variable from struct chip_data There hasn't been need to carry chip->cr0 after SPI core started to validate speed_hz and bits_per_word transfer parameters. That effectively caused that pump_transfers() always recalculated it and practically chip->cr0 is used locally in setup() for debug prints only. Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 10 ++++------ drivers/spi/spi-pxa2xx.h | 1 - 2 files changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index ebafd537b59f..a25bc1d4bf7f 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1101,6 +1101,7 @@ static int setup(struct spi_device *spi) struct driver_data *drv_data = spi_master_get_devdata(spi->master); unsigned int clk_div; uint tx_thres, tx_hi_thres, rx_thres; + u32 cr0; switch (drv_data->ssp_type) { case QUARK_X1000_SSP: @@ -1193,8 +1194,6 @@ static int setup(struct spi_device *spi) clk_div = pxa2xx_ssp_get_clk_div(drv_data, chip, spi->max_speed_hz); - chip->cr0 = pxa2xx_configure_sscr0(drv_data, clk_div, - spi->bits_per_word); switch (drv_data->ssp_type) { case QUARK_X1000_SSP: chip->threshold = (QUARK_X1000_SSCR1_RxTresh(rx_thres) @@ -1216,15 +1215,16 @@ static int setup(struct spi_device *spi) chip->cr1 |= SSCR1_LBM; /* NOTE: PXA25x_SSP _could_ use external clocking ... */ + cr0 = pxa2xx_configure_sscr0(drv_data, clk_div, spi->bits_per_word); if (!pxa25x_ssp_comp(drv_data)) dev_dbg(&spi->dev, "%ld Hz actual, %s\n", drv_data->max_clk_rate - / (1 + ((chip->cr0 & SSCR0_SCR(0xfff)) >> 8)), + / (1 + ((cr0 & SSCR0_SCR(0xfff)) >> 8)), chip->enable_dma ? "DMA" : "PIO"); else dev_dbg(&spi->dev, "%ld Hz actual, %s\n", drv_data->max_clk_rate / 2 - / (1 + ((chip->cr0 & SSCR0_SCR(0x0ff)) >> 8)), + / (1 + ((cr0 & SSCR0_SCR(0x0ff)) >> 8)), chip->enable_dma ? "DMA" : "PIO"); if (spi->bits_per_word <= 8) { @@ -1236,8 +1236,6 @@ static int setup(struct spi_device *spi) chip->read = u16_reader; chip->write = u16_writer; } else if (spi->bits_per_word <= 32) { - if (!is_quark_x1000_ssp(drv_data)) - chip->cr0 |= SSCR0_EDSS; chip->n_bytes = 4; chip->read = u32_reader; chip->write = u32_writer; diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h index 0875e985b90d..b91bda26bfa8 100644 --- a/drivers/spi/spi-pxa2xx.h +++ b/drivers/spi/spi-pxa2xx.h @@ -86,7 +86,6 @@ struct driver_data { }; struct chip_data { - u32 cr0; u32 cr1; u32 dds_rate; u32 psp; -- cgit v1.2.3 From 0eca7cf2696506006463b9d67bb6110c82d3e064 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Fri, 25 Sep 2015 10:27:17 +0300 Subject: spi: pxa2xx: Set the max_speed_hz of the master Carry input clock of the controller in max_speed_hz of struct spi_master instead of in own driver data. They mean the same thing and more over now the max_speed_hz is not even set here. As an added bonus this allows SPI core to validate that transfer speed is not beyond the maximum input clock. This is not a problem in spi-pxa2xx as the driver doesn't use transfer speed parameter directly but via input clock divider calculation which will top at divide by one. However it's better to validate speed before passing it here. Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 12 ++++++------ drivers/spi/spi-pxa2xx.h | 3 --- 2 files changed, 6 insertions(+), 9 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index a25bc1d4bf7f..0e075db589ca 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -802,7 +802,7 @@ static unsigned int quark_x1000_get_clk_div(int rate, u32 *dds) static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate) { - unsigned long ssp_clk = drv_data->max_clk_rate; + unsigned long ssp_clk = drv_data->master->max_speed_hz; const struct ssp_device *ssp = drv_data->ssp; rate = min_t(int, ssp_clk, rate); @@ -1217,13 +1217,13 @@ static int setup(struct spi_device *spi) /* NOTE: PXA25x_SSP _could_ use external clocking ... */ cr0 = pxa2xx_configure_sscr0(drv_data, clk_div, spi->bits_per_word); if (!pxa25x_ssp_comp(drv_data)) - dev_dbg(&spi->dev, "%ld Hz actual, %s\n", - drv_data->max_clk_rate + dev_dbg(&spi->dev, "%u Hz actual, %s\n", + drv_data->master->max_speed_hz / (1 + ((cr0 & SSCR0_SCR(0xfff)) >> 8)), chip->enable_dma ? "DMA" : "PIO"); else - dev_dbg(&spi->dev, "%ld Hz actual, %s\n", - drv_data->max_clk_rate / 2 + dev_dbg(&spi->dev, "%u Hz actual, %s\n", + drv_data->master->max_speed_hz / 2 / (1 + ((cr0 & SSCR0_SCR(0x0ff)) >> 8)), chip->enable_dma ? "DMA" : "PIO"); @@ -1473,7 +1473,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) /* Enable SOC clock */ clk_prepare_enable(ssp->clk); - drv_data->max_clk_rate = clk_get_rate(ssp->clk); + master->max_speed_hz = clk_get_rate(ssp->clk); /* Load default SSP configuration */ pxa2xx_spi_write(drv_data, SSCR0, 0); diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h index b91bda26bfa8..fd7a7bc91b9f 100644 --- a/drivers/spi/spi-pxa2xx.h +++ b/drivers/spi/spi-pxa2xx.h @@ -46,9 +46,6 @@ struct driver_data { u32 clear_sr; u32 mask_sr; - /* Maximun clock rate */ - unsigned long max_clk_rate; - /* Message Transfer pump */ struct tasklet_struct pump_transfers; -- cgit v1.2.3 From b9f6940a437dcb8481df16b175359e126cf7bc33 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Fri, 25 Sep 2015 10:27:18 +0300 Subject: spi: pxa2xx: Use ACPI_COMPANION() instead of acpi_bus_get_device() Get pointer to the struct acpi_device by using ACPI_COMPANION() macro. This is more efficient than using ACPI_HANDLE() and acpi_bus_get_device(). Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 0e075db589ca..aed9aabec14f 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1312,8 +1312,8 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev) const struct pci_device_id *pcidev_id = NULL; int devid, type; - if (!ACPI_HANDLE(&pdev->dev) || - acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev)) + adev = ACPI_COMPANION(&pdev->dev); + if (!adev) return NULL; if (dev_is_pci(pdev->dev.parent)) -- cgit v1.2.3 From 289de5541ca6aec56308c04b76c1bb59f00b1f09 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Thu, 1 Oct 2015 18:23:18 +0300 Subject: spi: pxa2xx: Remove empty function pxa2xx_spi_dma_resume() This was leftover from the legacy pxa2xx DMA implementation and not needed anymore so remove it. Signed-off-by: Mika Westerberg Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx-dma.c | 4 ---- drivers/spi/spi-pxa2xx.c | 2 -- drivers/spi/spi-pxa2xx.h | 2 -- 3 files changed, 8 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c index 66a173939be8..bd8b369a343c 100644 --- a/drivers/spi/spi-pxa2xx-dma.c +++ b/drivers/spi/spi-pxa2xx-dma.c @@ -344,10 +344,6 @@ void pxa2xx_spi_dma_release(struct driver_data *drv_data) } } -void pxa2xx_spi_dma_resume(struct driver_data *drv_data) -{ -} - int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip, struct spi_device *spi, u8 bits_per_word, u32 *burst_code, diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index aed9aabec14f..22b473ebf607 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1598,8 +1598,6 @@ static int pxa2xx_spi_resume(struct device *dev) struct ssp_device *ssp = drv_data->ssp; int status = 0; - pxa2xx_spi_dma_resume(drv_data); - /* Enable the SSP clock */ if (!pm_runtime_suspended(dev)) clk_prepare_enable(ssp->clk); diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h index fd7a7bc91b9f..514cf971707c 100644 --- a/drivers/spi/spi-pxa2xx.h +++ b/drivers/spi/spi-pxa2xx.h @@ -169,7 +169,6 @@ extern int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, u32 dma_burst); extern void pxa2xx_spi_dma_start(struct driver_data *drv_data); extern int pxa2xx_spi_dma_setup(struct driver_data *drv_data); extern void pxa2xx_spi_dma_release(struct driver_data *drv_data); -extern void pxa2xx_spi_dma_resume(struct driver_data *drv_data); extern int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip, struct spi_device *spi, u8 bits_per_word, @@ -190,7 +189,6 @@ static inline int pxa2xx_spi_dma_setup(struct driver_data *drv_data) return 0; } static inline void pxa2xx_spi_dma_release(struct driver_data *drv_data) {} -static inline void pxa2xx_spi_dma_resume(struct driver_data *drv_data) {} static inline int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip, struct spi_device *spi, u8 bits_per_word, -- cgit v1.2.3 From 54bf4505bd64bdb61e343fc007f2f21899172931 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Fri, 2 Oct 2015 16:52:27 +0300 Subject: spi: pxa2xx: Remove unused psp member variable from struct chip_data It is not used since commit 8d94cc50aa4f ("[PATCH] spi: stabilize PIO mode transfers on PXA2xx systems"). Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.h | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h index 0a9b6390a817..99c4d8a0a1d0 100644 --- a/drivers/spi/spi-pxa2xx.h +++ b/drivers/spi/spi-pxa2xx.h @@ -89,7 +89,6 @@ struct chip_data { u32 cr0; u32 cr1; u32 dds_rate; - u32 psp; u32 timeout; u8 n_bytes; u32 dma_burst_size; -- cgit v1.2.3 From 3ad48062233f32a8dd2649403f5afc076710f86b Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 13 Oct 2015 17:09:14 +0300 Subject: spi: pxa2xx: choose closest lower speed As per discussion [1] the best choice is to set closest speed which is not going over the asked one. Do the same approach for Intel Quark boards. [1] http://www.spinics.net/lists/linux-spi/msg03389.html Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 22b473ebf607..158967a10bec 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -730,7 +730,7 @@ static unsigned int quark_x1000_get_clk_div(int rate, u32 *dds) mul = (1 << 24) >> 1; /* Calculate initial quot */ - q1 = DIV_ROUND_CLOSEST(fref1, rate); + q1 = DIV_ROUND_UP(fref1, rate); /* Scale q1 if it's too big */ if (q1 > 256) { @@ -755,7 +755,7 @@ static unsigned int quark_x1000_get_clk_div(int rate, u32 *dds) /* Case 2 */ - q2 = DIV_ROUND_CLOSEST(fref2, rate); + q2 = DIV_ROUND_UP(fref2, rate); r2 = abs(fref2 / q2 - rate); /* @@ -774,13 +774,13 @@ static unsigned int quark_x1000_get_clk_div(int rate, u32 *dds) mul = (1 << 24) * 2 / 5; } - /* Check case 3 only If the divisor is big enough */ + /* Check case 3 only if the divisor is big enough */ if (fref / rate >= 80) { u64 fssp; u32 m; /* Calculate initial quot */ - q1 = DIV_ROUND_CLOSEST(fref, rate); + q1 = DIV_ROUND_UP(fref, rate); m = (1 << 24) / q1; /* Get the remainder */ -- cgit v1.2.3 From d74c4b1c61ecc5ad8158ac649245fdfc9601c1b5 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 22 Oct 2015 16:44:39 +0300 Subject: spi: pxa2xx: move debug messages to pump_transfer() The speed can be changed from transfer to transfer, that's why the messages do not depict the actual values during ->setup(). Move debug messages from ->setup() to pump_transfers(). Get rid of leftovers as well. Signed-off-by: Andy Shevchenko Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 28 +++++++++++----------------- 1 file changed, 11 insertions(+), 17 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 158967a10bec..986a2911e94e 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -955,7 +955,18 @@ static void pump_transfers(unsigned long data) "pump_transfers: DMA burst size reduced to match bits_per_word\n"); } + /* NOTE: PXA25x_SSP _could_ use external clocking ... */ cr0 = pxa2xx_configure_sscr0(drv_data, clk_div, bits); + if (!pxa25x_ssp_comp(drv_data)) + dev_dbg(&message->spi->dev, "%u Hz actual, %s\n", + drv_data->master->max_speed_hz + / (1 + ((cr0 & SSCR0_SCR(0xfff)) >> 8)), + chip->enable_dma ? "DMA" : "PIO"); + else + dev_dbg(&message->spi->dev, "%u Hz actual, %s\n", + drv_data->master->max_speed_hz / 2 + / (1 + ((cr0 & SSCR0_SCR(0x0ff)) >> 8)), + chip->enable_dma ? "DMA" : "PIO"); message->state = RUNNING_STATE; @@ -1099,9 +1110,7 @@ static int setup(struct spi_device *spi) struct chip_data *chip; const struct lpss_config *config; struct driver_data *drv_data = spi_master_get_devdata(spi->master); - unsigned int clk_div; uint tx_thres, tx_hi_thres, rx_thres; - u32 cr0; switch (drv_data->ssp_type) { case QUARK_X1000_SSP: @@ -1192,8 +1201,6 @@ static int setup(struct spi_device *spi) } } - clk_div = pxa2xx_ssp_get_clk_div(drv_data, chip, spi->max_speed_hz); - switch (drv_data->ssp_type) { case QUARK_X1000_SSP: chip->threshold = (QUARK_X1000_SSCR1_RxTresh(rx_thres) @@ -1214,19 +1221,6 @@ static int setup(struct spi_device *spi) if (spi->mode & SPI_LOOP) chip->cr1 |= SSCR1_LBM; - /* NOTE: PXA25x_SSP _could_ use external clocking ... */ - cr0 = pxa2xx_configure_sscr0(drv_data, clk_div, spi->bits_per_word); - if (!pxa25x_ssp_comp(drv_data)) - dev_dbg(&spi->dev, "%u Hz actual, %s\n", - drv_data->master->max_speed_hz - / (1 + ((cr0 & SSCR0_SCR(0xfff)) >> 8)), - chip->enable_dma ? "DMA" : "PIO"); - else - dev_dbg(&spi->dev, "%u Hz actual, %s\n", - drv_data->master->max_speed_hz / 2 - / (1 + ((cr0 & SSCR0_SCR(0x0ff)) >> 8)), - chip->enable_dma ? "DMA" : "PIO"); - if (spi->bits_per_word <= 8) { chip->n_bytes = 1; chip->read = u8_reader; -- cgit v1.2.3 From d2c2f6a47633a36bc8db8c802f7c284da36a7a53 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 22 Oct 2015 16:44:40 +0300 Subject: spi: pxa2xx: derive struct chip_data from struct drv_data Since we call pxa2xx_ssp_get_clk_div() from pump_transfers() we may derive pointer to struct chip_data from struct drv_data like it's done in the rest of the functions. This will make it less errorprone. Signed-off-by: Andy Shevchenko Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 986a2911e94e..4fddc2a37a81 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -814,8 +814,9 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate) } static unsigned int pxa2xx_ssp_get_clk_div(struct driver_data *drv_data, - struct chip_data *chip, int rate) + int rate) { + struct chip_data *chip = drv_data->cur_chip; unsigned int clk_div; switch (drv_data->ssp_type) { @@ -921,7 +922,7 @@ static void pump_transfers(unsigned long data) bits = transfer->bits_per_word; speed = transfer->speed_hz; - clk_div = pxa2xx_ssp_get_clk_div(drv_data, chip, speed); + clk_div = pxa2xx_ssp_get_clk_div(drv_data, speed); if (bits <= 8) { drv_data->n_bytes = 1; -- cgit v1.2.3 From 3b8b6d05942ef5dd952674e7420600f762166e22 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Thu, 22 Oct 2015 16:44:41 +0300 Subject: spi: pxa2xx: Convert unique ID string of ACPI device as unsigned integer Andy noticed numeric unique device ID is unsigned integer so convert it using kstrtouint(). Actually integer in ACPI 2.0 and later is 64 bits litte-endian unsigned integer but quite certainly having so big value here would mean something extra than just the SPI bus number so it won't hurt to assume only lower 32 bits carry the bus number for now. Signed-off-by: Jarkko Nikula Cc: Mika Westerberg Cc: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 4fddc2a37a81..db9016bbd904 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1305,7 +1305,8 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev) struct resource *res; const struct acpi_device_id *adev_id = NULL; const struct pci_device_id *pcidev_id = NULL; - int devid, type; + unsigned int devid; + int type; adev = ACPI_COMPANION(&pdev->dev); if (!adev) @@ -1352,7 +1353,7 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev) ssp->pdev = pdev; ssp->port_id = -1; - if (adev->pnp.unique_id && !kstrtoint(adev->pnp.unique_id, 0, &devid)) + if (adev->pnp.unique_id && !kstrtouint(adev->pnp.unique_id, 0, &devid)) ssp->port_id = devid; pdata->num_chipselect = 1; -- cgit v1.2.3 From 0e8972187971ac6c29a9e5899fa6c555c739237c Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Thu, 22 Oct 2015 16:44:42 +0300 Subject: spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select Upcoming Intel platforms use LPSS SPI_CS_CONTROL register bits 15:12 for configuring the chip select polarities. Touch only chip select SW mode and state bits when enabling the software chip select control in order to not clear any other bits in the register. Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index db9016bbd904..4dc5660d4e33 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -249,7 +249,9 @@ static void lpss_ssp_setup(struct driver_data *drv_data) drv_data->lpss_base = drv_data->ioaddr + config->offset; /* Enable software chip select control */ - value = SPI_CS_CONTROL_SW_MODE | SPI_CS_CONTROL_CS_HIGH; + value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl); + value &= ~(SPI_CS_CONTROL_SW_MODE | SPI_CS_CONTROL_CS_HIGH); + value |= SPI_CS_CONTROL_SW_MODE | SPI_CS_CONTROL_CS_HIGH; __lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value); /* Enable multiblock DMA transfers */ -- cgit v1.2.3 From ceb941afa5c38dae8e273089266c412d362c7963 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Thu, 22 Oct 2015 16:44:43 +0300 Subject: spi: pxa2xx: Align a few defines Add more indentation to define lines for making them aligned with the longest one. They would look messy after adding more long defines. Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 4dc5660d4e33..0f6a6c89eab3 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -61,9 +61,9 @@ MODULE_ALIAS("platform:pxa2xx-spi"); | QUARK_X1000_SSCR1_TFT \ | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM) -#define GENERAL_REG_RXTO_HOLDOFF_DISABLE BIT(24) -#define SPI_CS_CONTROL_SW_MODE BIT(0) -#define SPI_CS_CONTROL_CS_HIGH BIT(1) +#define GENERAL_REG_RXTO_HOLDOFF_DISABLE BIT(24) +#define SPI_CS_CONTROL_SW_MODE BIT(0) +#define SPI_CS_CONTROL_CS_HIGH BIT(1) struct lpss_config { /* LPSS offset from drv_data->ioaddr */ -- cgit v1.2.3 From ca5d24854210dd02548a080d4271560e926c4fcb Mon Sep 17 00:00:00 2001 From: "Andrew F. Davis" Date: Fri, 23 Oct 2015 08:59:10 -0500 Subject: spi: Add THIS_MODULE to spi_driver in SPI core Add spi_register_driver helper macro that adds THIS_MODULE to spi_driver for the registering driver. We rename and modify the existing spi_register_driver to enable this. Signed-off-by: Andrew F. Davis Signed-off-by: Mark Brown --- drivers/spi/spi.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 3abb3903f2ad..51e33dbe4e05 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -305,12 +305,13 @@ static void spi_drv_shutdown(struct device *dev) } /** - * spi_register_driver - register a SPI driver + * __spi_register_driver - register a SPI driver * @sdrv: the driver to register * Context: can sleep */ -int spi_register_driver(struct spi_driver *sdrv) +int __spi_register_driver(struct module *owner, struct spi_driver *sdrv) { + sdrv->driver.owner = owner; sdrv->driver.bus = &spi_bus_type; if (sdrv->probe) sdrv->driver.probe = spi_drv_probe; @@ -320,7 +321,7 @@ int spi_register_driver(struct spi_driver *sdrv) sdrv->driver.shutdown = spi_drv_shutdown; return driver_register(&sdrv->driver); } -EXPORT_SYMBOL_GPL(spi_register_driver); +EXPORT_SYMBOL_GPL(__spi_register_driver); /*-------------------------------------------------------------------------*/ -- cgit v1.2.3 From 3821a065f5672c430a088ae68b4da2a2d2b34106 Mon Sep 17 00:00:00 2001 From: "Andrew F. Davis" Date: Fri, 23 Oct 2015 08:59:11 -0500 Subject: spi: Drop owner assignment from spi_drivers An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis Acked-by: Jonathan Cameron Signed-off-by: Mark Brown --- drivers/spi/spi-tle62x0.c | 1 - drivers/spi/spidev.c | 1 - 2 files changed, 2 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-tle62x0.c b/drivers/spi/spi-tle62x0.c index daf5aa1c24c3..c6ae775289e5 100644 --- a/drivers/spi/spi-tle62x0.c +++ b/drivers/spi/spi-tle62x0.c @@ -307,7 +307,6 @@ static int tle62x0_remove(struct spi_device *spi) static struct spi_driver tle62x0_driver = { .driver = { .name = "tle62x0", - .owner = THIS_MODULE, }, .probe = tle62x0_probe, .remove = tle62x0_remove, diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index fba92a526531..84622418ceda 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -787,7 +787,6 @@ static int spidev_remove(struct spi_device *spi) static struct spi_driver spidev_spi_driver = { .driver = { .name = "spidev", - .owner = THIS_MODULE, .of_match_table = of_match_ptr(spidev_dt_ids), }, .probe = spidev_probe, -- cgit v1.2.3 From 624ea72ebddc1f61d32c9e6265f8d6f6dacd26d6 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Wed, 28 Oct 2015 15:13:39 +0200 Subject: spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific Rename a few defines that are specific to Intel LPSS SPI private registers with LPSS prefix. It makes easier to distinguish them from common defines. Suggested-by: Robert Jarzmik Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 0f6a6c89eab3..9060aee5a7b1 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -61,9 +61,9 @@ MODULE_ALIAS("platform:pxa2xx-spi"); | QUARK_X1000_SSCR1_TFT \ | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM) -#define GENERAL_REG_RXTO_HOLDOFF_DISABLE BIT(24) -#define SPI_CS_CONTROL_SW_MODE BIT(0) -#define SPI_CS_CONTROL_CS_HIGH BIT(1) +#define LPSS_GENERAL_REG_RXTO_HOLDOFF_DISABLE BIT(24) +#define LPSS_CS_CONTROL_SW_MODE BIT(0) +#define LPSS_CS_CONTROL_CS_HIGH BIT(1) struct lpss_config { /* LPSS offset from drv_data->ioaddr */ @@ -250,8 +250,8 @@ static void lpss_ssp_setup(struct driver_data *drv_data) /* Enable software chip select control */ value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl); - value &= ~(SPI_CS_CONTROL_SW_MODE | SPI_CS_CONTROL_CS_HIGH); - value |= SPI_CS_CONTROL_SW_MODE | SPI_CS_CONTROL_CS_HIGH; + value &= ~(LPSS_CS_CONTROL_SW_MODE | LPSS_CS_CONTROL_CS_HIGH); + value |= LPSS_CS_CONTROL_SW_MODE | LPSS_CS_CONTROL_CS_HIGH; __lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value); /* Enable multiblock DMA transfers */ @@ -261,7 +261,7 @@ static void lpss_ssp_setup(struct driver_data *drv_data) if (config->reg_general >= 0) { value = __lpss_ssp_read_priv(drv_data, config->reg_general); - value |= GENERAL_REG_RXTO_HOLDOFF_DISABLE; + value |= LPSS_GENERAL_REG_RXTO_HOLDOFF_DISABLE; __lpss_ssp_write_priv(drv_data, config->reg_general, value); } @@ -277,9 +277,9 @@ static void lpss_ssp_cs_control(struct driver_data *drv_data, bool enable) value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl); if (enable) - value &= ~SPI_CS_CONTROL_CS_HIGH; + value &= ~LPSS_CS_CONTROL_CS_HIGH; else - value |= SPI_CS_CONTROL_CS_HIGH; + value |= LPSS_CS_CONTROL_CS_HIGH; __lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value); } -- cgit v1.2.3 From d0283eb2dbc11ec08375fdf6a436e96d25b3a593 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Wed, 28 Oct 2015 15:13:40 +0200 Subject: spi: pxa2xx: Add output control for multiple Intel LPSS chip selects Intel LPSS SPI host controllers in upcoming Intel platforms can have up to 4 chip selects per port. Extend chip select control in lpss_ssp_cs_control() by adding a code that selects the active chip select output prior to changing the state. Detection for number of enabled chip select signals will be added by another patch. Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 9060aee5a7b1..040f6bb566a1 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -64,6 +64,8 @@ MODULE_ALIAS("platform:pxa2xx-spi"); #define LPSS_GENERAL_REG_RXTO_HOLDOFF_DISABLE BIT(24) #define LPSS_CS_CONTROL_SW_MODE BIT(0) #define LPSS_CS_CONTROL_CS_HIGH BIT(1) +#define LPSS_CS_CONTROL_CS_SEL_SHIFT 8 +#define LPSS_CS_CONTROL_CS_SEL_MASK (3 << LPSS_CS_CONTROL_CS_SEL_SHIFT) struct lpss_config { /* LPSS offset from drv_data->ioaddr */ @@ -271,15 +273,34 @@ static void lpss_ssp_setup(struct driver_data *drv_data) static void lpss_ssp_cs_control(struct driver_data *drv_data, bool enable) { const struct lpss_config *config; - u32 value; + u32 value, cs; config = lpss_get_config(drv_data); value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl); - if (enable) + if (enable) { + cs = drv_data->cur_msg->spi->chip_select; + cs <<= LPSS_CS_CONTROL_CS_SEL_SHIFT; + if (cs != (value & LPSS_CS_CONTROL_CS_SEL_MASK)) { + /* + * When switching another chip select output active + * the output must be selected first and wait 2 ssp_clk + * cycles before changing state to active. Otherwise + * a short glitch will occur on the previous chip + * select since output select is latched but state + * control is not. + */ + value &= ~LPSS_CS_CONTROL_CS_SEL_MASK; + value |= cs; + __lpss_ssp_write_priv(drv_data, + config->reg_cs_ctrl, value); + ndelay(1000000000 / + (drv_data->master->max_speed_hz / 2)); + } value &= ~LPSS_CS_CONTROL_CS_HIGH; - else + } else { value |= LPSS_CS_CONTROL_CS_HIGH; + } __lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value); } -- cgit v1.2.3 From 8b136baa5892f25bba0373d6eb0f5f84efc93986 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Wed, 28 Oct 2015 15:13:41 +0200 Subject: spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals SPI capabilities register located in private registers space of newer Intel LPSS SPI host controllers tell in register bits 12:9 which chip select signals are enabled. Use that information for detecting the number of chip selects. For simplicity we assume chip selects are enabled one after another without disabled chip selects between. For instance CS0 | CS1 | CS2 but not CS0 | CS1 | CS3. Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 040f6bb566a1..a5c2dce7d0a3 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -13,6 +13,7 @@ * GNU General Public License for more details. */ +#include #include #include #include @@ -66,6 +67,8 @@ MODULE_ALIAS("platform:pxa2xx-spi"); #define LPSS_CS_CONTROL_CS_HIGH BIT(1) #define LPSS_CS_CONTROL_CS_SEL_SHIFT 8 #define LPSS_CS_CONTROL_CS_SEL_MASK (3 << LPSS_CS_CONTROL_CS_SEL_SHIFT) +#define LPSS_CAPS_CS_EN_SHIFT 9 +#define LPSS_CAPS_CS_EN_MASK (0xf << LPSS_CAPS_CS_EN_SHIFT) struct lpss_config { /* LPSS offset from drv_data->ioaddr */ @@ -74,6 +77,7 @@ struct lpss_config { int reg_general; int reg_ssp; int reg_cs_ctrl; + int reg_capabilities; /* FIFO thresholds */ u32 rx_threshold; u32 tx_threshold_lo; @@ -87,6 +91,7 @@ static const struct lpss_config lpss_platforms[] = { .reg_general = 0x08, .reg_ssp = 0x0c, .reg_cs_ctrl = 0x18, + .reg_capabilities = -1, .rx_threshold = 64, .tx_threshold_lo = 160, .tx_threshold_hi = 224, @@ -96,6 +101,7 @@ static const struct lpss_config lpss_platforms[] = { .reg_general = 0x08, .reg_ssp = 0x0c, .reg_cs_ctrl = 0x18, + .reg_capabilities = -1, .rx_threshold = 64, .tx_threshold_lo = 160, .tx_threshold_hi = 224, @@ -105,6 +111,7 @@ static const struct lpss_config lpss_platforms[] = { .reg_general = -1, .reg_ssp = 0x20, .reg_cs_ctrl = 0x24, + .reg_capabilities = 0xfc, .rx_threshold = 1, .tx_threshold_lo = 32, .tx_threshold_hi = 56, @@ -1400,6 +1407,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) struct spi_master *master; struct driver_data *drv_data; struct ssp_device *ssp; + const struct lpss_config *config; int status; u32 tmp; @@ -1439,7 +1447,6 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP; master->bus_num = ssp->port_id; - master->num_chipselect = platform_info->num_chipselect; master->dma_alignment = DMA_ALIGNMENT; master->cleanup = cleanup; master->setup = setup; @@ -1525,6 +1532,19 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) if (is_lpss_ssp(drv_data)) lpss_ssp_setup(drv_data); + if (is_lpss_ssp(drv_data)) { + lpss_ssp_setup(drv_data); + config = lpss_get_config(drv_data); + if (config->reg_capabilities >= 0) { + tmp = __lpss_ssp_read_priv(drv_data, + config->reg_capabilities); + tmp &= LPSS_CAPS_CS_EN_MASK; + tmp >>= LPSS_CAPS_CS_EN_SHIFT; + platform_info->num_chipselect = ffz(tmp); + } + } + master->num_chipselect = platform_info->num_chipselect; + tasklet_init(&drv_data->pump_transfers, pump_transfers, (unsigned long)drv_data); -- cgit v1.2.3 From b7c08cf85c9a3a4b05474b7acacc9fbce8fb3eaf Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Wed, 28 Oct 2015 15:13:42 +0200 Subject: spi: pxa2xx: Add support for Intel Broxton LPSS SPI in Intel Broxton is otherwise the same than in Intel Sunrisepoint but it supports up to four chip selects per port and has different FIFO thresholds. Patch adds support for two Broxton SoC variants. Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index a5c2dce7d0a3..f759c082f0f7 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -116,6 +116,16 @@ static const struct lpss_config lpss_platforms[] = { .tx_threshold_lo = 32, .tx_threshold_hi = 56, }, + { /* LPSS_BXT_SSP */ + .offset = 0x200, + .reg_general = -1, + .reg_ssp = 0x20, + .reg_cs_ctrl = 0x24, + .reg_capabilities = 0xfc, + .rx_threshold = 1, + .tx_threshold_lo = 16, + .tx_threshold_hi = 48, + }, }; static inline const struct lpss_config @@ -130,6 +140,7 @@ static bool is_lpss_ssp(const struct driver_data *drv_data) case LPSS_LPT_SSP: case LPSS_BYT_SSP: case LPSS_SPT_SSP: + case LPSS_BXT_SSP: return true; default: return false; @@ -1152,6 +1163,7 @@ static int setup(struct spi_device *spi) case LPSS_LPT_SSP: case LPSS_BYT_SSP: case LPSS_SPT_SSP: + case LPSS_BXT_SSP: config = lpss_get_config(drv_data); tx_thres = config->tx_threshold_lo; tx_hi_thres = config->tx_threshold_hi; @@ -1313,6 +1325,14 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = { /* SPT-H */ { PCI_VDEVICE(INTEL, 0xa129), LPSS_SPT_SSP }, { PCI_VDEVICE(INTEL, 0xa12a), LPSS_SPT_SSP }, + /* BXT */ + { PCI_VDEVICE(INTEL, 0x0ac2), LPSS_BXT_SSP }, + { PCI_VDEVICE(INTEL, 0x0ac4), LPSS_BXT_SSP }, + { PCI_VDEVICE(INTEL, 0x0ac6), LPSS_BXT_SSP }, + /* APL */ + { PCI_VDEVICE(INTEL, 0x5ac2), LPSS_BXT_SSP }, + { PCI_VDEVICE(INTEL, 0x5ac4), LPSS_BXT_SSP }, + { PCI_VDEVICE(INTEL, 0x5ac6), LPSS_BXT_SSP }, { }, }; -- cgit v1.2.3 From 0db642151ad80967e9e1c2abf3e19bd7902ecdc9 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Wed, 28 Oct 2015 15:13:43 +0200 Subject: spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI Extend the pxa2xx_spi_acpi_get_pdata() so that it can create platform data also on platforms that do not support ACPI or if CONFIG_ACPI is not set. Now it is expected that "pxa2xx-spi" platform device is either created with explicit platform data or has an ACPI companion device. However there is only little in pxa2xx_spi_acpi_get_pdata() that is really dependent on ACPI companion and it can be reworked to cover also cases where "pxa2xx-spi" device doesn't have ACPI companion and is created without platform data. Do this by renaming the pxa2xx_spi_acpi_get_pdata(), moving it outside of CONFIG_ACPI test and changing a few runtime tests there to support non-ACPI case. Only port/bus ID setting based on ACPI _UID is dependent on ACPI and is moved to own function inside CONFIG_ACPI. Purpose of this to support non-ACPI case for those PCI enumerated compound devices that integrate both LPSS SPI host controller and integrated DMA engine under the same PCI ID and which are registered in MFD layer instead of in spi-pxa2xx-pci.c. Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 38 ++++++++++++++++++++++++++------------ 1 file changed, 26 insertions(+), 12 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index f759c082f0f7..2e951084987d 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1300,6 +1300,7 @@ static void cleanup(struct spi_device *spi) kfree(chip); } +#ifdef CONFIG_PCI #ifdef CONFIG_ACPI static const struct acpi_device_id pxa2xx_spi_acpi_match[] = { @@ -1313,6 +1314,23 @@ static const struct acpi_device_id pxa2xx_spi_acpi_match[] = { }; MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match); +static int pxa2xx_spi_get_port_id(struct acpi_device *adev) +{ + unsigned int devid; + int port_id = -1; + + if (adev && adev->pnp.unique_id && + !kstrtouint(adev->pnp.unique_id, 0, &devid)) + port_id = devid; + return port_id; +} +#else /* !CONFIG_ACPI */ +static int pxa2xx_spi_get_port_id(struct acpi_device *adev) +{ + return -1; +} +#endif + /* * PCI IDs of compound devices that integrate both host controller and private * integrated DMA engine. Please note these are not used in module @@ -1347,7 +1365,7 @@ static bool pxa2xx_spi_idma_filter(struct dma_chan *chan, void *param) } static struct pxa2xx_spi_master * -pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev) +pxa2xx_spi_init_pdata(struct platform_device *pdev) { struct pxa2xx_spi_master *pdata; struct acpi_device *adev; @@ -1355,19 +1373,18 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev) struct resource *res; const struct acpi_device_id *adev_id = NULL; const struct pci_device_id *pcidev_id = NULL; - unsigned int devid; int type; adev = ACPI_COMPANION(&pdev->dev); - if (!adev) - return NULL; if (dev_is_pci(pdev->dev.parent)) pcidev_id = pci_match_id(pxa2xx_spi_pci_compound_match, to_pci_dev(pdev->dev.parent)); - else + else if (adev) adev_id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev); + else + return NULL; if (adev_id) type = (int)adev_id->driver_data; @@ -1401,10 +1418,7 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev) ssp->irq = platform_get_irq(pdev, 0); ssp->type = type; ssp->pdev = pdev; - - ssp->port_id = -1; - if (adev->pnp.unique_id && !kstrtouint(adev->pnp.unique_id, 0, &devid)) - ssp->port_id = devid; + ssp->port_id = pxa2xx_spi_get_port_id(adev); pdata->num_chipselect = 1; pdata->enable_dma = true; @@ -1412,9 +1426,9 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev) return pdata; } -#else +#else /* !CONFIG_PCI */ static inline struct pxa2xx_spi_master * -pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev) +pxa2xx_spi_init_pdata(struct platform_device *pdev) { return NULL; } @@ -1433,7 +1447,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) platform_info = dev_get_platdata(dev); if (!platform_info) { - platform_info = pxa2xx_spi_acpi_get_pdata(pdev); + platform_info = pxa2xx_spi_init_pdata(pdev); if (!platform_info) { dev_err(&pdev->dev, "missing platform data\n"); return -ENODEV; -- cgit v1.2.3