From 1ec26db1f8cae0aca64708e0fe1f687eab7c82e5 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 11 Nov 2008 21:45:57 +0800 Subject: pxafb: introduce LCD_TYPE_MASK and use it. Signed-off-by: Daniel Mack Signed-off-by: Eric Miao --- drivers/video/pxafb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/video') diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 97204497d9f7..64990592dc58 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -1372,7 +1372,7 @@ static void pxafb_decode_mach_info(struct pxafb_info *fbi, fbi->cmap_inverse = inf->cmap_inverse; fbi->cmap_static = inf->cmap_static; - switch (lcd_conn & 0xf) { + switch (lcd_conn & LCD_TYPE_MASK) { case LCD_TYPE_MONO_STN: fbi->lccr0 = LCCR0_CMS; break; -- cgit v1.2.3 From 6cc4abe43e9362034881ad8c005f4ab8a684ae3e Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 11 Nov 2008 21:47:07 +0800 Subject: pxafb: only initialize the smart panel thread when dealing with a smartpanel Signed-off-by: Daniel Mack Signed-off-by: Eric Miao --- drivers/video/pxafb.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/video') diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 64990592dc58..cc59c52e1103 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -804,6 +804,9 @@ static int pxafb_smart_thread(void *arg) static int pxafb_smart_init(struct pxafb_info *fbi) { + if (!(fbi->lccr0 | LCCR0_LCDT)) + return 0; + fbi->smart_thread = kthread_run(pxafb_smart_thread, fbi, "lcd_refresh"); if (IS_ERR(fbi->smart_thread)) { -- cgit v1.2.3 From a108096878aa6cb744b5280ca59395b6c0152d14 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 14 Nov 2008 09:59:48 -0700 Subject: powerpc/virtex: fix various format/casting printk mismatches Various printk format string in code used by the Xilinx Virtex platform are not 32-bit/64-bit safe. Add correct casting to fix the bugs. Reported-by: Josh Boyer Signed-off-by: Grant Likely Acked-by: Josh Boyer --- drivers/video/xilinxfb.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c index 5da3d2423cc0..40a3a2afbfe7 100644 --- a/drivers/video/xilinxfb.c +++ b/drivers/video/xilinxfb.c @@ -298,8 +298,9 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr, /* Put a banner in the log (for DEBUG) */ dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, drvdata->regs); - dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n", - (void*)drvdata->fb_phys, drvdata->fb_virt, fbsize); + dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n", + (unsigned long long) drvdata->fb_phys, drvdata->fb_virt, + fbsize); return 0; /* success */ -- cgit v1.2.3 From cf7b9a1e11993a064f445d332fecf22819b87a5e Mon Sep 17 00:00:00 2001 From: Julien Brunel Date: Wed, 19 Nov 2008 15:36:07 -0800 Subject: drivers/video: bad error test before a dereference The error test that follows the call to backlight_device_register semms not to concern the right variable. A simplified version of the semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @def0@ expression x; position p0; @@ x@p0 = backlight_device_register(...) @protected@ expression def0.x,E; position def0.p0; position p; statement S; @@ x@p0 ... when != x = E if (!IS_ERR(x) && ...) {<... x@p ...>} else S @unprotected@ expression def0.x; identifier fld; position def0.p0; position p != protected.p; @@ x@p0 ... when != x = E * x@p->fld // Signed-off-by: Julien Brunel Signed-off-by: Julia Lawall Acked-by: Nicolas Ferre Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/atmel_lcdfb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/video') diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index f8d0a57a07cb..9a577a800db5 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -132,7 +132,7 @@ static void init_backlight(struct atmel_lcdfb_info *sinfo) bl = backlight_device_register("backlight", &sinfo->pdev->dev, sinfo, &atmel_lcdc_bl_ops); - if (IS_ERR(sinfo->backlight)) { + if (IS_ERR(bl)) { dev_err(&sinfo->pdev->dev, "error %ld on backlight register\n", PTR_ERR(bl)); return; -- cgit v1.2.3 From cf7ee554f3a324e98181b0ea249d9d5be3a0acb8 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 19 Nov 2008 15:36:10 -0800 Subject: fbdev: clean the penguin's dirty feet When booting in a direct color mode, the penguin has dirty feet, i.e., some pixels have the wrong color. This is caused by fb_set_logo_directpalette() which does not initialize the last 32 palette entries. Signed-off-by: Clemens Ladisch Acked-by: Geert Uytterhoeven Cc: Krzysztof Helt Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/fbmem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/video') diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index 1d5ae39cb271..3c65b0d67617 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -230,7 +230,7 @@ static void fb_set_logo_directpalette(struct fb_info *info, greenshift = info->var.green.offset; blueshift = info->var.blue.offset; - for (i = 32; i < logo->clutsize; i++) + for (i = 32; i < 32 + logo->clutsize; i++) palette[i] = i << redshift | i << greenshift | i << blueshift; } -- cgit v1.2.3 From a495a6d35a026826d54a69d01f373681e14f59ac Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Wed, 19 Nov 2008 15:36:19 -0800 Subject: tmiofb: fix compilation with ACCEL disabled Restore support for compiling tmiofb with acceleration disabled. Signed-off-by: Dmitry Baryshkov Cc: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/tmiofb.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/tmiofb.c b/drivers/video/tmiofb.c index 2a380011e9ba..7baf2dd12d50 100644 --- a/drivers/video/tmiofb.c +++ b/drivers/video/tmiofb.c @@ -222,6 +222,9 @@ static irqreturn_t tmiofb_irq(int irq, void *__info) unsigned int bbisc = tmio_ioread16(par->lcr + LCR_BBISC); + tmio_iowrite16(bbisc, par->lcr + LCR_BBISC); + +#ifdef CONFIG_FB_TMIO_ACCELL /* * We were in polling mode and now we got correct irq. * Switch back to IRQ-based sync of command FIFO @@ -231,9 +234,6 @@ static irqreturn_t tmiofb_irq(int irq, void *__info) par->use_polling = false; } - tmio_iowrite16(bbisc, par->lcr + LCR_BBISC); - -#ifdef CONFIG_FB_TMIO_ACCELL if (bbisc & 1) wake_up(&par->wait_acc); #endif @@ -938,7 +938,9 @@ static void tmiofb_dump_regs(struct platform_device *dev) static int tmiofb_suspend(struct platform_device *dev, pm_message_t state) { struct fb_info *info = platform_get_drvdata(dev); +#ifdef CONFIG_FB_TMIO_ACCELL struct tmiofb_par *par = info->par; +#endif struct mfd_cell *cell = dev->dev.platform_data; int retval = 0; @@ -950,12 +952,14 @@ static int tmiofb_suspend(struct platform_device *dev, pm_message_t state) info->fbops->fb_sync(info); +#ifdef CONFIG_FB_TMIO_ACCELL /* * The fb should be usable even if interrupts are disabled (and they are * during suspend/resume). Switch temporary to forced polling. */ printk(KERN_INFO "tmiofb: switching to polling\n"); par->use_polling = true; +#endif tmiofb_hw_stop(dev); if (cell->suspend) -- cgit v1.2.3 From c267fd777a478d74fa8959628538b64088f67fd2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Wed, 19 Nov 2008 15:36:23 -0800 Subject: viafb: fix releasing of /proc/viafb/ subtree MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When unloading viafb module it does not remove it's /proc/viafb/ subtree which causes multiple viafb directories to appear below proc when mobprobing viafb and also lets kernel WARN() on duplicate proc entries: [ 145.458387] WARNING: at /usr/src/linux-2.6.28-rc3-git6/fs/proc/generic.c:551 proc_register+0xe6/0x160() [ 145.458945] proc_dir_entry '/proc/viafb' already registered [ 145.459278] Modules linked in: viafb(+) i2c_algo_bit cfbcopyarea cfbimgblt cfbfillrect snd_hda_intel snd_pcm snd_timer snd soundcore snd_page_alloc sg via_agp agpgart [last unloaded: drm] [ 145.460647] Pid: 1904, comm: modprobe Tainted: G W 2.6.28-rc3-git6 #4 [ 145.461064] Call Trace: [ 145.461248] [] ? dump_stack+0x1/0x80 [ 145.461533] [] warn_slowpath+0x63/0x80 [ 145.461851] [] ? idr_get_empty_slot+0xe9/0x250 [ 145.462186] [] ? ida_get_new_above+0xf0/0x150 [ 145.462528] [] proc_register+0xe6/0x160 [ 145.462827] [] proc_mkdir_mode+0x36/0x50 [ 145.463135] [] proc_mkdir+0xf/0x20 [ 145.463457] [] viafb_init+0x73c/0xc86 [viafb] [ 145.463823] [] ? viafb_init+0x0/0xc86 [viafb] [ 145.464147] [] do_one_initcall+0x2d/0x160 [ 145.464460] [] ? sysfs_add_file+0x13/0x20 [ 145.464786] [] ? vfree+0x21/0x30 [ 145.465049] [] ? load_module+0x1215/0x1500 [ 145.465381] [] ? __alloc_pages_internal+0x95/0x400 [ 145.465755] [] sys_init_module+0x83/0x1a0 [ 145.466065] [] ? sys_read+0x3d/0x70 [ 145.466354] [] sysenter_do_call+0x12/0x25 [ 145.466653] ---[ end trace c84b37826e16748c ]--- Signed-off-by: Bruno Prémont Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/via/viafbdev.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c index 0132eae06f55..73ac754ad801 100644 --- a/drivers/video/via/viafbdev.c +++ b/drivers/video/via/viafbdev.c @@ -2036,30 +2036,30 @@ static int viafb_vt1636_proc_write(struct file *file, return count; } -static void viafb_init_proc(struct proc_dir_entry *viafb_entry) +static void viafb_init_proc(struct proc_dir_entry **viafb_entry) { struct proc_dir_entry *entry; - viafb_entry = proc_mkdir("viafb", NULL); + *viafb_entry = proc_mkdir("viafb", NULL); if (viafb_entry) { - entry = create_proc_entry("dvp0", 0, viafb_entry); + entry = create_proc_entry("dvp0", 0, *viafb_entry); if (entry) { entry->owner = THIS_MODULE; entry->read_proc = viafb_dvp0_proc_read; entry->write_proc = viafb_dvp0_proc_write; } - entry = create_proc_entry("dvp1", 0, viafb_entry); + entry = create_proc_entry("dvp1", 0, *viafb_entry); if (entry) { entry->owner = THIS_MODULE; entry->read_proc = viafb_dvp1_proc_read; entry->write_proc = viafb_dvp1_proc_write; } - entry = create_proc_entry("dfph", 0, viafb_entry); + entry = create_proc_entry("dfph", 0, *viafb_entry); if (entry) { entry->owner = THIS_MODULE; entry->read_proc = viafb_dfph_proc_read; entry->write_proc = viafb_dfph_proc_write; } - entry = create_proc_entry("dfpl", 0, viafb_entry); + entry = create_proc_entry("dfpl", 0, *viafb_entry); if (entry) { entry->owner = THIS_MODULE; entry->read_proc = viafb_dfpl_proc_read; @@ -2068,7 +2068,7 @@ static void viafb_init_proc(struct proc_dir_entry *viafb_entry) if (VT1636_LVDS == viaparinfo->chip_info->lvds_chip_info. lvds_chip_name || VT1636_LVDS == viaparinfo->chip_info->lvds_chip_info2.lvds_chip_name) { - entry = create_proc_entry("vt1636", 0, viafb_entry); + entry = create_proc_entry("vt1636", 0, *viafb_entry); if (entry) { entry->owner = THIS_MODULE; entry->read_proc = viafb_vt1636_proc_read; @@ -2087,6 +2087,7 @@ static void viafb_remove_proc(struct proc_dir_entry *viafb_entry) remove_proc_entry("dfpl", viafb_entry); remove_proc_entry("vt1636", viafb_entry); remove_proc_entry("vt1625", viafb_entry); + remove_proc_entry("viafb", NULL); } static int __devinit via_pci_probe(void) @@ -2348,7 +2349,7 @@ static int __devinit via_pci_probe(void) viafbinfo->node, viafbinfo->fix.id, default_var.xres, default_var.yres, default_var.bits_per_pixel); - viafb_init_proc(viaparinfo->proc_entry); + viafb_init_proc(&viaparinfo->proc_entry); viafb_init_dac(IGA2); return 0; } -- cgit v1.2.3 From b3b4dc8840a8fdbe495723d35cd976d781fd42fa Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 19 Nov 2008 15:36:25 -0800 Subject: lcd: fix oops if driver only interested in .set_power The LCD driver core calls LCD drivers when either the blanking state or the display mode has changed, but does not make any check to see if the called driver has a .set_mode method. This means if a driver only has a .set_power method then the system will OOPS on changing mode (and with the console semaphore held so you cannot easily see the problem). Fix the problem by ensuring that either callback is valid before use. Signed-off-by: Ben Dooks Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/backlight/lcd.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c index 8e1731d3b228..680e57b616cd 100644 --- a/drivers/video/backlight/lcd.c +++ b/drivers/video/backlight/lcd.c @@ -42,10 +42,13 @@ static int fb_notifier_callback(struct notifier_block *self, mutex_lock(&ld->ops_lock); if (!ld->ops->check_fb || ld->ops->check_fb(ld, evdata->info)) { - if (event == FB_EVENT_BLANK) - ld->ops->set_power(ld, *(int *)evdata->data); - else - ld->ops->set_mode(ld, evdata->data); + if (event == FB_EVENT_BLANK) { + if (ld->ops->set_power) + ld->ops->set_power(ld, *(int *)evdata->data); + } else { + if (ld->ops->set_mode) + ld->ops->set_mode(ld, evdata->data); + } } mutex_unlock(&ld->ops_lock); return 0; -- cgit v1.2.3 From c0d861afa5c986f7fe23647fbe411cd300f7c927 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 19 Nov 2008 15:36:41 -0800 Subject: drivers/video/backlight/da903x.c: introduce missing kfree Error handling code following a kzalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // Signed-off-by: Julia Lawall Cc: Mike Rapoport Cc: Richard Purdie Cc: Eric Miao Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/backlight/da903x.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/video') diff --git a/drivers/video/backlight/da903x.c b/drivers/video/backlight/da903x.c index 242c38250166..75388b959439 100644 --- a/drivers/video/backlight/da903x.c +++ b/drivers/video/backlight/da903x.c @@ -119,6 +119,7 @@ static int da903x_backlight_probe(struct platform_device *pdev) default: dev_err(&pdev->dev, "invalid backlight device ID(%d)\n", pdev->id); + kfree(data); return -EINVAL; } -- cgit v1.2.3 From ee11940f8e7a2f064af22d52180cb5f9643eef61 Mon Sep 17 00:00:00 2001 From: Vlada Peric Date: Wed, 19 Nov 2008 15:36:45 -0800 Subject: cirrusfb: remove unused variables MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit After commit a1d35a7a (cirrusfb: use modedb and add mode_option parameter), these variables are no longer used, so remove them to fix compilation warning. Signed-off-by: Vlada Periæ Acked-by: Krzysztof Helt Cc: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/cirrusfb.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c index 8a8760230bc7..a2aa6ddffbe2 100644 --- a/drivers/video/cirrusfb.c +++ b/drivers/video/cirrusfb.c @@ -2462,8 +2462,7 @@ static int __init cirrusfb_init(void) #ifndef MODULE static int __init cirrusfb_setup(char *options) { - char *this_opt, s[32]; - int i; + char *this_opt; DPRINTK("ENTER\n"); -- cgit v1.2.3 From f55491a4bcbe8bab337bc00830ca12d703ea2613 Mon Sep 17 00:00:00 2001 From: Mike Rapoport <[mailto:mike@compulab.co.il]> Date: Wed, 19 Nov 2008 15:36:49 -0800 Subject: drivers/video/backlight/da903x.c: introduce one more missing kfree One more error handling code should have kfree as well Signed-off-by: Mike Rapoport Acked-by: Eric Miao Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/backlight/da903x.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/video') diff --git a/drivers/video/backlight/da903x.c b/drivers/video/backlight/da903x.c index 75388b959439..93bb4340cc64 100644 --- a/drivers/video/backlight/da903x.c +++ b/drivers/video/backlight/da903x.c @@ -131,6 +131,7 @@ static int da903x_backlight_probe(struct platform_device *pdev) data, &da903x_backlight_ops); if (IS_ERR(bl)) { dev_err(&pdev->dev, "failed to register backlight\n"); + kfree(data); return PTR_ERR(bl); } -- cgit v1.2.3 From 7953031da4200323ab5d85bd514054ca4ba9d225 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 24 Nov 2008 18:11:16 -0800 Subject: ARM: OMAP: Remove broken LCD driver for SX1 Recently the omap McBSP code was cleaned up to get rid of direct McBSP register tinkering by the drivers. Looks like lcd_sx1.c never got converted, and now it breaks builds. It seems the lcd_sx1.c driver is attempting SPI mode, but doing it in a different way compared to omap_mcbsp_set_spi_mode(). Remove the broken driver, patches welcome to add it back when done properly by patching both mcbsp.c and lcd_sx1.c. Cc: Vovan888@gmail.com Cc: linux-fbdev-devel@lists.sourceforge.net Signed-off-by: Tony Lindgren --- drivers/video/omap/Makefile | 1 - drivers/video/omap/lcd_sx1.c | 327 ------------------------------------------- 2 files changed, 328 deletions(-) delete mode 100644 drivers/video/omap/lcd_sx1.c (limited to 'drivers/video') diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile index 99da8b6d2c36..ed13889c1162 100644 --- a/drivers/video/omap/Makefile +++ b/drivers/video/omap/Makefile @@ -23,7 +23,6 @@ objs-y$(CONFIG_MACH_OMAP_PALMZ71) += lcd_palmz71.o objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o -objs-y$(CONFIG_MACH_SX1) += lcd_sx1.o omapfb-objs := $(objs-yy) diff --git a/drivers/video/omap/lcd_sx1.c b/drivers/video/omap/lcd_sx1.c deleted file mode 100644 index e55de201b8ff..000000000000 --- a/drivers/video/omap/lcd_sx1.c +++ /dev/null @@ -1,327 +0,0 @@ -/* - * LCD panel support for the Siemens SX1 mobile phone - * - * Current version : Vovan888@gmail.com, great help from FCA00000 - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include -#include -#include -#include - -#include -#include -#include -#include - -/* - * OMAP310 GPIO registers - */ -#define GPIO_DATA_INPUT 0xfffce000 -#define GPIO_DATA_OUTPUT 0xfffce004 -#define GPIO_DIR_CONTROL 0xfffce008 -#define GPIO_INT_CONTROL 0xfffce00c -#define GPIO_INT_MASK 0xfffce010 -#define GPIO_INT_STATUS 0xfffce014 -#define GPIO_PIN_CONTROL 0xfffce018 - - -#define A_LCD_SSC_RD 3 -#define A_LCD_SSC_SD 7 -#define _A_LCD_RESET 9 -#define _A_LCD_SSC_CS 12 -#define _A_LCD_SSC_A0 13 - -#define DSP_REG 0xE1017024 - -const unsigned char INIT_1[12] = { - 0x1C, 0x02, 0x88, 0x00, 0x1E, 0xE0, 0x00, 0xDC, 0x00, 0x02, 0x00 -}; - -const unsigned char INIT_2[127] = { - 0x15, 0x00, 0x29, 0x00, 0x3E, 0x00, 0x51, 0x00, - 0x65, 0x00, 0x7A, 0x00, 0x8D, 0x00, 0xA1, 0x00, - 0xB6, 0x00, 0xC7, 0x00, 0xD8, 0x00, 0xEB, 0x00, - 0xFB, 0x00, 0x0B, 0x01, 0x1B, 0x01, 0x27, 0x01, - 0x34, 0x01, 0x41, 0x01, 0x4C, 0x01, 0x55, 0x01, - 0x5F, 0x01, 0x68, 0x01, 0x70, 0x01, 0x78, 0x01, - 0x7E, 0x01, 0x86, 0x01, 0x8C, 0x01, 0x94, 0x01, - 0x9B, 0x01, 0xA1, 0x01, 0xA4, 0x01, 0xA9, 0x01, - 0xAD, 0x01, 0xB2, 0x01, 0xB7, 0x01, 0xBC, 0x01, - 0xC0, 0x01, 0xC4, 0x01, 0xC8, 0x01, 0xCB, 0x01, - 0xCF, 0x01, 0xD2, 0x01, 0xD5, 0x01, 0xD8, 0x01, - 0xDB, 0x01, 0xE0, 0x01, 0xE3, 0x01, 0xE6, 0x01, - 0xE8, 0x01, 0xEB, 0x01, 0xEE, 0x01, 0xF1, 0x01, - 0xF3, 0x01, 0xF8, 0x01, 0xF9, 0x01, 0xFC, 0x01, - 0x00, 0x02, 0x03, 0x02, 0x07, 0x02, 0x09, 0x02, - 0x0E, 0x02, 0x13, 0x02, 0x1C, 0x02, 0x00 -}; - -const unsigned char INIT_3[15] = { - 0x14, 0x26, 0x33, 0x3D, 0x45, 0x4D, 0x53, 0x59, - 0x5E, 0x63, 0x67, 0x6D, 0x71, 0x78, 0xFF -}; - -static void epson_sendbyte(int flag, unsigned char byte) -{ - int i, shifter = 0x80; - - if (!flag) - gpio_set_value(_A_LCD_SSC_A0, 0); - mdelay(2); - gpio_set_value(A_LCD_SSC_RD, 1); - - gpio_set_value(A_LCD_SSC_SD, flag); - - OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200); - OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202); - for (i = 0; i < 8; i++) { - OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200); - gpio_set_value(A_LCD_SSC_SD, shifter & byte); - OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202); - shifter >>= 1; - } - gpio_set_value(_A_LCD_SSC_A0, 1); -} - -static void init_system(void) -{ - omap_mcbsp_request(OMAP_MCBSP3); - omap_mcbsp_stop(OMAP_MCBSP3); -} - -static void setup_GPIO(void) -{ - /* new wave */ - gpio_request(A_LCD_SSC_RD, "lcd_ssc_rd"); - gpio_request(A_LCD_SSC_SD, "lcd_ssc_sd"); - gpio_request(_A_LCD_RESET, "lcd_reset"); - gpio_request(_A_LCD_SSC_CS, "lcd_ssc_cs"); - gpio_request(_A_LCD_SSC_A0, "lcd_ssc_a0"); - - /* set GPIOs to output, with initial data */ - gpio_direction_output(A_LCD_SSC_RD, 1); - gpio_direction_output(A_LCD_SSC_SD, 0); - gpio_direction_output(_A_LCD_RESET, 0); - gpio_direction_output(_A_LCD_SSC_CS, 1); - gpio_direction_output(_A_LCD_SSC_A0, 1); -} - -static void display_init(void) -{ - int i; - - omap_cfg_reg(MCBSP3_CLKX); - - mdelay(2); - setup_GPIO(); - mdelay(2); - - /* reset LCD */ - gpio_set_value(A_LCD_SSC_SD, 1); - epson_sendbyte(0, 0x25); - - gpio_set_value(_A_LCD_RESET, 0); - mdelay(10); - gpio_set_value(_A_LCD_RESET, 1); - - gpio_set_value(_A_LCD_SSC_CS, 1); - mdelay(2); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD, phase 1 */ - epson_sendbyte(0, 0xCA); - for (i = 0; i < 10; i++) - epson_sendbyte(1, INIT_1[i]); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 2 */ - epson_sendbyte(0, 0xCB); - for (i = 0; i < 125; i++) - epson_sendbyte(1, INIT_2[i]); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 2a */ - epson_sendbyte(0, 0xCC); - for (i = 0; i < 14; i++) - epson_sendbyte(1, INIT_3[i]); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 3 */ - epson_sendbyte(0, 0xBC); - epson_sendbyte(1, 0x08); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 4 */ - epson_sendbyte(0, 0x07); - epson_sendbyte(1, 0x05); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 5 */ - epson_sendbyte(0, 0x94); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 6 */ - epson_sendbyte(0, 0xC6); - epson_sendbyte(1, 0x80); - gpio_set_value(_A_LCD_SSC_CS, 1); - mdelay(100); /* used to be 1000 */ - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 7 */ - epson_sendbyte(0, 0x16); - epson_sendbyte(1, 0x02); - epson_sendbyte(1, 0x00); - epson_sendbyte(1, 0xB1); - epson_sendbyte(1, 0x00); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 8 */ - epson_sendbyte(0, 0x76); - epson_sendbyte(1, 0x00); - epson_sendbyte(1, 0x00); - epson_sendbyte(1, 0xDB); - epson_sendbyte(1, 0x00); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 9 */ - epson_sendbyte(0, 0xAF); - gpio_set_value(_A_LCD_SSC_CS, 1); -} - -static int sx1_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) -{ - return 0; -} - -static void sx1_panel_cleanup(struct lcd_panel *panel) -{ -} - -static void sx1_panel_disable(struct lcd_panel *panel) -{ - printk(KERN_INFO "SX1: LCD panel disable\n"); - sx1_setmmipower(0); - gpio_set_value(_A_LCD_SSC_CS, 1); - - epson_sendbyte(0, 0x25); - gpio_set_value(_A_LCD_SSC_CS, 0); - - epson_sendbyte(0, 0xAE); - gpio_set_value(_A_LCD_SSC_CS, 1); - mdelay(100); - gpio_set_value(_A_LCD_SSC_CS, 0); - - epson_sendbyte(0, 0x95); - gpio_set_value(_A_LCD_SSC_CS, 1); -} - -static int sx1_panel_enable(struct lcd_panel *panel) -{ - printk(KERN_INFO "lcd_sx1: LCD panel enable\n"); - init_system(); - display_init(); - - sx1_setmmipower(1); - sx1_setbacklight(0x18); - sx1_setkeylight (0x06); - return 0; -} - - -static unsigned long sx1_panel_get_caps(struct lcd_panel *panel) -{ - return 0; -} - -struct lcd_panel sx1_panel = { - .name = "sx1", - .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC | - OMAP_LCDC_INV_HSYNC | OMAP_LCDC_INV_PIX_CLOCK | - OMAP_LCDC_INV_OUTPUT_EN, - - .x_res = 176, - .y_res = 220, - .data_lines = 16, - .bpp = 16, - .hsw = 5, - .hfp = 5, - .hbp = 5, - .vsw = 2, - .vfp = 1, - .vbp = 1, - .pixel_clock = 1500, - - .init = sx1_panel_init, - .cleanup = sx1_panel_cleanup, - .enable = sx1_panel_enable, - .disable = sx1_panel_disable, - .get_caps = sx1_panel_get_caps, -}; - -static int sx1_panel_probe(struct platform_device *pdev) -{ - omapfb_register_panel(&sx1_panel); - return 0; -} - -static int sx1_panel_remove(struct platform_device *pdev) -{ - return 0; -} - -static int sx1_panel_suspend(struct platform_device *pdev, pm_message_t mesg) -{ - return 0; -} - -static int sx1_panel_resume(struct platform_device *pdev) -{ - return 0; -} - -struct platform_driver sx1_panel_driver = { - .probe = sx1_panel_probe, - .remove = sx1_panel_remove, - .suspend = sx1_panel_suspend, - .resume = sx1_panel_resume, - .driver = { - .name = "lcd_sx1", - .owner = THIS_MODULE, - }, -}; - -static int sx1_panel_drv_init(void) -{ - return platform_driver_register(&sx1_panel_driver); -} - -static void sx1_panel_drv_cleanup(void) -{ - platform_driver_unregister(&sx1_panel_driver); -} - -module_init(sx1_panel_drv_init); -module_exit(sx1_panel_drv_cleanup); -- cgit v1.2.3 From ffb78a26169351f6c22cdae481b057d50d5d759b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:38:14 +0000 Subject: get xenbus_driver ->probe() "recognized" by modpost ... by giving the instances' names magic suffix recognized by modpost ;-/ Their ->probe() is __devinit Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/video/xen-fbfront.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c index a463b3dd837b..2493f05e9f61 100644 --- a/drivers/video/xen-fbfront.c +++ b/drivers/video/xen-fbfront.c @@ -668,7 +668,7 @@ static struct xenbus_device_id xenfb_ids[] = { { "" } }; -static struct xenbus_driver xenfb = { +static struct xenbus_driver xenfb_driver = { .name = "vfb", .owner = THIS_MODULE, .ids = xenfb_ids, @@ -687,12 +687,12 @@ static int __init xenfb_init(void) if (xen_initial_domain()) return -ENODEV; - return xenbus_register_frontend(&xenfb); + return xenbus_register_frontend(&xenfb_driver); } static void __exit xenfb_cleanup(void) { - xenbus_unregister_driver(&xenfb); + xenbus_unregister_driver(&xenfb_driver); } module_init(xenfb_init); -- cgit v1.2.3 From c4c6fa9891f3d1bcaae4f39fb751d5302965b566 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 1 Dec 2008 13:13:58 -0800 Subject: radeonfb: fix problem with color expansion & alignment The engine on some radeon variants locks up if color expansion is called for non aligned source data. This patch enables a feature of the core fbdev to request aligned input pixmaps and uses the HW clipping engine to clip the output to the requested size Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11875 Signed-off-by: Benjamin Herrenschmidt Tested-by: James Cloos Cc: "Rafael J. Wysocki" Cc: "David S. Miller" Cc: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/aty/radeon_accel.c | 21 ++++++++++++--------- drivers/video/aty/radeon_base.c | 18 ++++++++++++++++++ 2 files changed, 30 insertions(+), 9 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/aty/radeon_accel.c b/drivers/video/aty/radeon_accel.c index 8718f7349d6b..a547e5d4c8bf 100644 --- a/drivers/video/aty/radeon_accel.c +++ b/drivers/video/aty/radeon_accel.c @@ -174,12 +174,12 @@ static void radeonfb_prim_imageblit(struct radeonfb_info *rinfo, const struct fb_image *image, u32 fg, u32 bg) { - unsigned int src_bytes, dwords; + unsigned int dwords; u32 *bits; radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache, rinfo->dp_gui_mc_base | - GMC_BRUSH_NONE | + GMC_BRUSH_NONE | GMC_DST_CLIP_LEAVE | GMC_SRC_DATATYPE_MONO_FG_BG | ROP3_S | GMC_BYTE_ORDER_MSB_TO_LSB | @@ -189,9 +189,6 @@ static void radeonfb_prim_imageblit(struct radeonfb_info *rinfo, radeonfb_set_creg(rinfo, DP_SRC_FRGD_CLR, &rinfo->dp_src_fg_cache, fg); radeonfb_set_creg(rinfo, DP_SRC_BKGD_CLR, &rinfo->dp_src_bg_cache, bg); - radeon_fifo_wait(rinfo, 1); - OUTREG(DST_Y_X, (image->dy << 16) | image->dx); - /* Ensure the dst cache is flushed and the engine idle before * issuing the operation. * @@ -205,13 +202,19 @@ static void radeonfb_prim_imageblit(struct radeonfb_info *rinfo, /* X here pads width to a multiple of 32 and uses the clipper to * adjust the result. Is that really necessary ? Things seem to - * work ok for me without that and the doco doesn't seem to imply + * work ok for me without that and the doco doesn't seem to imply] * there is such a restriction. */ - OUTREG(DST_WIDTH_HEIGHT, (image->width << 16) | image->height); + radeon_fifo_wait(rinfo, 4); + OUTREG(SC_TOP_LEFT, (image->dy << 16) | image->dx); + OUTREG(SC_BOTTOM_RIGHT, ((image->dy + image->height) << 16) | + (image->dx + image->width)); + OUTREG(DST_Y_X, (image->dy << 16) | image->dx); + + OUTREG(DST_HEIGHT_WIDTH, (image->height << 16) | ((image->width + 31) & ~31)); - src_bytes = (((image->width * image->depth) + 7) / 8) * image->height; - dwords = (src_bytes + 3) / 4; + dwords = (image->width + 31) >> 5; + dwords *= image->height; bits = (u32*)(image->data); while(dwords >= 8) { diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index 9a5821c65ebf..b3ffe8205d2b 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -1875,6 +1875,7 @@ static int __devinit radeon_set_fbinfo (struct radeonfb_info *rinfo) info->fbops = &radeonfb_ops; info->screen_base = rinfo->fb_base; info->screen_size = rinfo->mapped_vram; + /* Fill fix common fields */ strlcpy(info->fix.id, rinfo->name, sizeof(info->fix.id)); info->fix.smem_start = rinfo->fb_base_phys; @@ -1889,8 +1890,25 @@ static int __devinit radeon_set_fbinfo (struct radeonfb_info *rinfo) info->fix.mmio_len = RADEON_REGSIZE; info->fix.accel = FB_ACCEL_ATI_RADEON; + /* Allocate colormap */ fb_alloc_cmap(&info->cmap, 256, 0); + /* Setup pixmap used for acceleration */ +#define PIXMAP_SIZE (2048 * 4) + + info->pixmap.addr = kmalloc(PIXMAP_SIZE, GFP_KERNEL); + if (!info->pixmap.addr) { + printk(KERN_ERR "radeonfb: Failed to allocate pixmap !\n"); + noaccel = 1; + goto bail; + } + info->pixmap.size = PIXMAP_SIZE; + info->pixmap.flags = FB_PIXMAP_SYSTEM; + info->pixmap.scan_align = 4; + info->pixmap.buf_align = 4; + info->pixmap.access_align = 32; + +bail: if (noaccel) info->flags |= FBINFO_HWACCEL_DISABLED; -- cgit v1.2.3 From bca404afdc5206c3bb30168315ee8a98a579ec65 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Mon, 1 Dec 2008 13:14:05 -0800 Subject: fbdev: fix FB console blanking The commit aef7db4bd5a3b6068dfa05919a3d685199eed116 fixed the problem with recursive locking in fb blanking code if blank is caused by user setting the /sys/class/graphics/fb*/blank. However this broke the fbcon timeout blanking. If you use a driver that defines ->fb_blank operation and at the same time that driver relies on other driver (e.g. backlight or lcd class) to blank the screen, when the fbcon times out and tries to blank the fb, it will call only fb driver blanker and won't notify the other driver. Thus FB output is disabled, but the screen isn't blanked. Restore fbcon blanking and at the same time apply the proper fix for the above problem: if fbcon_blank is called with FBINFO_FLAG_USEREVENT, we are already called through notification from fb_blank, thus we don't have to blank the fb again. Signed-off-by: Dmitry Baryshkov Cc: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/console/fbcon.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index b92947d62ad6..67ff370d80af 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -2389,16 +2389,13 @@ static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch) if (!fbcon_is_inactive(vc, info)) { if (ops->blank_state != blank) { - int ret = 1; - ops->blank_state = blank; fbcon_cursor(vc, blank ? CM_ERASE : CM_DRAW); ops->cursor_flash = (!blank); - if (info->fbops->fb_blank) - ret = info->fbops->fb_blank(blank, info); - if (ret) - fbcon_generic_blank(vc, info, blank); + if (!(info->flags & FBINFO_MISC_USEREVENT)) + if (fb_blank(info, blank)) + fbcon_generic_blank(vc, info, blank); } if (!blank) -- cgit v1.2.3 From 89c223a616cddd9eab792b860f61f99cec53c4e8 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Tue, 18 Nov 2008 20:40:40 +0100 Subject: macfb: Do not overflow fb_fix_screeninfo.id Don't overflow the 16-character fb_fix_screeninfo id string (fixes some console erasing and blanking artifacts). Have the ID default to "Unknown" on machines with no built-in video and no nubus devices. Check for fb_alloc_cmap failure. Signed-off-by: Finn Thain Signed-off-by: Geert Uytterhoeven --- drivers/video/macfb.c | 74 ++++++++++++++++++++++++--------------------------- 1 file changed, 35 insertions(+), 39 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/macfb.c b/drivers/video/macfb.c index b790ddff76f9..ee380d5f3410 100644 --- a/drivers/video/macfb.c +++ b/drivers/video/macfb.c @@ -164,7 +164,6 @@ static struct fb_var_screeninfo macfb_defined = { }; static struct fb_fix_screeninfo macfb_fix = { - .id = "Macintosh ", .type = FB_TYPE_PACKED_PIXELS, .accel = FB_ACCEL_NONE, }; @@ -760,22 +759,22 @@ static int __init macfb_init(void) switch(ndev->dr_hw) { case NUBUS_DRHW_APPLE_MDC: - strcat( macfb_fix.id, "Display Card" ); + strcpy(macfb_fix.id, "Mac Disp. Card"); macfb_setpalette = mdc_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; break; case NUBUS_DRHW_APPLE_TFB: - strcat( macfb_fix.id, "Toby" ); + strcpy(macfb_fix.id, "Toby"); macfb_setpalette = toby_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; break; case NUBUS_DRHW_APPLE_JET: - strcat( macfb_fix.id, "Jet"); + strcpy(macfb_fix.id, "Jet"); macfb_setpalette = jet_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; break; default: - strcat( macfb_fix.id, "Generic NuBus" ); + strcpy(macfb_fix.id, "Generic NuBus"); break; } } @@ -786,21 +785,11 @@ static int __init macfb_init(void) if (!video_is_nubus) switch( mac_bi_data.id ) { - /* These don't have onboard video. Eventually, we may - be able to write separate framebuffer drivers for - them (tobyfb.c, hiresfb.c, etc, etc) */ - case MAC_MODEL_II: - case MAC_MODEL_IIX: - case MAC_MODEL_IICX: - case MAC_MODEL_IIFX: - strcat( macfb_fix.id, "Generic NuBus" ); - break; - /* Valkyrie Quadras */ case MAC_MODEL_Q630: /* I'm not sure about this one */ case MAC_MODEL_P588: - strcat( macfb_fix.id, "Valkyrie built-in" ); + strcpy(macfb_fix.id, "Valkyrie"); macfb_setpalette = valkyrie_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; valkyrie_cmap_regs = ioremap(DAC_BASE, 0x1000); @@ -823,7 +812,7 @@ static int __init macfb_init(void) case MAC_MODEL_Q700: case MAC_MODEL_Q900: case MAC_MODEL_Q950: - strcat( macfb_fix.id, "DAFB built-in" ); + strcpy(macfb_fix.id, "DAFB"); macfb_setpalette = dafb_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; dafb_cmap_regs = ioremap(DAFB_BASE, 0x1000); @@ -831,7 +820,7 @@ static int __init macfb_init(void) /* LC II uses the V8 framebuffer */ case MAC_MODEL_LCII: - strcat( macfb_fix.id, "V8 built-in" ); + strcpy(macfb_fix.id, "V8"); macfb_setpalette = v8_brazil_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); @@ -843,7 +832,7 @@ static int __init macfb_init(void) case MAC_MODEL_IIVI: case MAC_MODEL_IIVX: case MAC_MODEL_P600: - strcat( macfb_fix.id, "Brazil built-in" ); + strcpy(macfb_fix.id, "Brazil"); macfb_setpalette = v8_brazil_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); @@ -860,7 +849,7 @@ static int __init macfb_init(void) case MAC_MODEL_P460: macfb_setpalette = v8_brazil_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; - strcat( macfb_fix.id, "Sonora built-in" ); + strcpy(macfb_fix.id, "Sonora"); v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); break; @@ -871,7 +860,7 @@ static int __init macfb_init(void) case MAC_MODEL_IISI: macfb_setpalette = rbv_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; - strcat( macfb_fix.id, "RBV built-in" ); + strcpy(macfb_fix.id, "RBV"); rbv_cmap_regs = ioremap(DAC_BASE, 0x1000); break; @@ -880,7 +869,7 @@ static int __init macfb_init(void) case MAC_MODEL_C660: macfb_setpalette = civic_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; - strcat( macfb_fix.id, "Civic built-in" ); + strcpy(macfb_fix.id, "Civic"); civic_cmap_regs = ioremap(CIVIC_BASE, 0x1000); break; @@ -901,7 +890,7 @@ static int __init macfb_init(void) v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); } - strcat( macfb_fix.id, "LC built-in" ); + strcpy(macfb_fix.id, "LC"); break; /* We think this may be like the LC II */ case MAC_MODEL_CCL: @@ -911,18 +900,18 @@ static int __init macfb_init(void) v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); } - strcat( macfb_fix.id, "Color Classic built-in" ); + strcpy(macfb_fix.id, "Color Classic"); break; /* And we *do* mean "weirdos" */ case MAC_MODEL_TV: - strcat( macfb_fix.id, "Mac TV built-in" ); + strcpy(macfb_fix.id, "Mac TV"); break; /* These don't have colour, so no need to worry */ case MAC_MODEL_SE30: case MAC_MODEL_CLII: - strcat( macfb_fix.id, "Monochrome built-in" ); + strcpy(macfb_fix.id, "Monochrome"); break; /* Powerbooks are particularly difficult. Many of @@ -935,7 +924,7 @@ static int __init macfb_init(void) case MAC_MODEL_PB140: case MAC_MODEL_PB145: case MAC_MODEL_PB170: - strcat( macfb_fix.id, "DDC built-in" ); + strcpy(macfb_fix.id, "DDC"); break; /* Internal is GSC, External (if present) is ViSC */ @@ -945,13 +934,13 @@ static int __init macfb_init(void) case MAC_MODEL_PB180: case MAC_MODEL_PB210: case MAC_MODEL_PB230: - strcat( macfb_fix.id, "GSC built-in" ); + strcpy(macfb_fix.id, "GSC"); break; /* Internal is TIM, External is ViSC */ case MAC_MODEL_PB165C: case MAC_MODEL_PB180C: - strcat( macfb_fix.id, "TIM built-in" ); + strcpy(macfb_fix.id, "TIM"); break; /* Internal is CSC, External is Keystone+Ariel. */ @@ -963,12 +952,12 @@ static int __init macfb_init(void) case MAC_MODEL_PB280C: macfb_setpalette = csc_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; - strcat( macfb_fix.id, "CSC built-in" ); + strcpy(macfb_fix.id, "CSC"); csc_cmap_regs = ioremap(CSC_BASE, 0x1000); break; default: - strcat( macfb_fix.id, "Unknown/Unsupported built-in" ); + strcpy(macfb_fix.id, "Unknown"); break; } @@ -978,16 +967,23 @@ static int __init macfb_init(void) fb_info.pseudo_palette = pseudo_palette; fb_info.flags = FBINFO_DEFAULT; - fb_alloc_cmap(&fb_info.cmap, video_cmap_len, 0); + err = fb_alloc_cmap(&fb_info.cmap, video_cmap_len, 0); + if (err) + goto fail_unmap; err = register_framebuffer(&fb_info); - if (!err) - printk("fb%d: %s frame buffer device\n", - fb_info.node, fb_info.fix.id); - else { - iounmap(fb_info.screen_base); - iounmap_macfb(); - } + if (err) + goto fail_dealloc; + + printk("fb%d: %s frame buffer device\n", + fb_info.node, fb_info.fix.id); + return 0; + +fail_dealloc: + fb_dealloc_cmap(&fb_info.cmap); +fail_unmap: + iounmap(fb_info.screen_base); + iounmap_macfb(); return err; } -- cgit v1.2.3