From 2d1299aad5b6f6ceeb92d066c58717a164df4876 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 31 Mar 2009 15:04:39 -0700 Subject: libata: Remove some redundant casts from pata_octeon_cf.c Signed-off-by: David Daney Signed-off-by: Jeff Garzik --- drivers/ata/pata_octeon_cf.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c index efe2c1985af3..8d9343accf3c 100644 --- a/drivers/ata/pata_octeon_cf.c +++ b/drivers/ata/pata_octeon_cf.c @@ -503,7 +503,7 @@ static void octeon_cf_dma_setup(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; struct octeon_cf_port *cf_port; - cf_port = (struct octeon_cf_port *)ap->private_data; + cf_port = ap->private_data; DPRINTK("ENTER\n"); /* issue r/w command */ qc->cursg = qc->sg; @@ -596,7 +596,7 @@ static unsigned int octeon_cf_dma_finished(struct ata_port *ap, if (ap->hsm_task_state != HSM_ST_LAST) return 0; - cf_port = (struct octeon_cf_port *)ap->private_data; + cf_port = ap->private_data; dma_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_DMA_CFGX(ocd->dma_engine)); if (dma_cfg.s.size != 0xfffff) { @@ -657,7 +657,7 @@ static irqreturn_t octeon_cf_interrupt(int irq, void *dev_instance) continue; ocd = ap->dev->platform_data; - cf_port = (struct octeon_cf_port *)ap->private_data; + cf_port = ap->private_data; dma_int.u64 = cvmx_read_csr(CVMX_MIO_BOOT_DMA_INTX(ocd->dma_engine)); dma_cfg.u64 = -- cgit v1.2.3 From c3f93b8fc6471ddbbc2a7e89fdfcfc8367e17564 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 31 Mar 2009 10:44:34 +0900 Subject: ata_piix: VGN-BX297XP wants the controller power up on suspend Sony VGN-BX297XP fails suspend if the controller is powered down when calling into ACPI suspend. Add the machine to piix_broken_suspend list. This problem was reported by GNUtoo@no-log.org on bko#10293. Signed-off-by: Tejun Heo Cc: Rafael J. Wysocki Reported-by: GNUtoo@no-log.org Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index e5cbe80ce172..942d14ac8792 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1053,6 +1053,13 @@ static int piix_broken_suspend(void) DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE M500"), }, }, + { + .ident = "VGN-BX297XP", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-BX297XP"), + }, + }, { } /* terminate list */ }; -- cgit v1.2.3 From 4c1e9aa41b2f9afe8f26e2efe5bb4695f6c40772 Mon Sep 17 00:00:00 2001 From: David Milburn Date: Fri, 3 Apr 2009 15:36:41 -0500 Subject: libata: ahci enclosure management bios workaround During driver initialization ahci_start_port may not be able to turn LEDs off because the hardware may still be transmitting a message. And since the BIOS may not be setting the LEDs to off the drive LEDs may end up in a fault state. This has been seen on ICH9r and ICH10r when configured in AHCI mode instead of RAID mode, this patch doesn't key off a specific set of device IDs but will give the EM transmit bit a chance to clear if busy. Signed-off-by: David Milburn Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 788bba2b1e17..6ca4bc0fcae3 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -78,6 +78,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, ssize_t size); #define MAX_SLOTS 8 +#define MAX_RETRY 15 enum { AHCI_PCI_BAR = 5, @@ -1115,6 +1116,8 @@ static void ahci_start_port(struct ata_port *ap) struct ahci_port_priv *pp = ap->private_data; struct ata_link *link; struct ahci_em_priv *emp; + ssize_t rc; + int i; /* enable FIS reception */ ahci_start_fis_rx(ap); @@ -1126,7 +1129,17 @@ static void ahci_start_port(struct ata_port *ap) if (ap->flags & ATA_FLAG_EM) { ata_for_each_link(link, ap, EDGE) { emp = &pp->em_priv[link->pmp]; - ahci_transmit_led_message(ap, emp->led_state, 4); + + /* EM Transmit bit maybe busy during init */ + for (i = 0; i < MAX_RETRY; i++) { + rc = ahci_transmit_led_message(ap, + emp->led_state, + 4); + if (rc == -EBUSY) + udelay(100); + else + break; + } } } @@ -1331,7 +1344,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, em_ctl = readl(mmio + HOST_EM_CTL); if (em_ctl & EM_CTL_TM) { spin_unlock_irqrestore(ap->lock, flags); - return -EINVAL; + return -EBUSY; } /* -- cgit v1.2.3 From 44c65d169c5d2e5c872581ebc65f12710d7c3b71 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Mon, 6 Apr 2009 12:29:49 -0400 Subject: sata_mv: revert SoC irq breakage Revert most of commit 6be96ac1d5e4d913e1f48299db083ada5321803b2, originally from Lennert Buijtenheck (Marvell) and Saeed Bishara (Marvell), since that commit causes sata_mv to oops at startup on SOC "Kirkwood". The SOC variants do not have the hpriv->irq_{cause,mask}_ofs registers, so don't try to write to them! This patch should also be considered for -stable. Reported-by: Maxime Bizon Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index a377226b81c8..be9ae4fc5cbe 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -3734,11 +3734,13 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); } - /* Clear any currently outstanding host interrupt conditions */ - writelfl(0, mmio + hpriv->irq_cause_ofs); + if (!IS_SOC(hpriv)) { + /* Clear any currently outstanding host interrupt conditions */ + writelfl(0, mmio + hpriv->irq_cause_ofs); - /* and unmask interrupt generation for host regs */ - writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs); + /* and unmask interrupt generation for host regs */ + writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs); + } /* * enable only global host interrupts for now. -- cgit v1.2.3 From 933cb8e5fcdebd4b666165e3f039f814d62b0e52 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Mon, 6 Apr 2009 12:30:43 -0400 Subject: sata_mv: fix irq mask races Prevent racing on the main interrupt mask during port_start and port_stop. Otherwise, we end up with IRQs masked on inactive ports, and hotplug insertions then get missed later on. Found while debugging (out of tree) target mode operations, but the bug is present and impacting mainline as well. This patch should also be considered for -stable. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index be9ae4fc5cbe..8245c82505cc 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1575,6 +1575,7 @@ static int mv_port_start(struct ata_port *ap) struct device *dev = ap->host->dev; struct mv_host_priv *hpriv = ap->host->private_data; struct mv_port_priv *pp; + unsigned long flags; int tag; pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); @@ -1610,8 +1611,12 @@ static int mv_port_start(struct ata_port *ap) pp->sg_tbl_dma[tag] = pp->sg_tbl_dma[0]; } } + + spin_lock_irqsave(ap->lock, flags); mv_save_cached_regs(ap); mv_edma_cfg(ap, 0, 0); + spin_unlock_irqrestore(ap->lock, flags); + return 0; out_port_free_dma_mem: @@ -1630,8 +1635,12 @@ out_port_free_dma_mem: */ static void mv_port_stop(struct ata_port *ap) { + unsigned long flags; + + spin_lock_irqsave(ap->lock, flags); mv_stop_edma(ap); mv_enable_port_irqs(ap, 0); + spin_unlock_irqrestore(ap->lock, flags); mv_port_free_dma_mem(ap); } -- cgit v1.2.3 From c361acbc59c434315f8649ab06e5b7d5b297d1b7 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Mon, 6 Apr 2009 15:22:21 -0400 Subject: sata_mv: replace 0x1f with ATA_PIO4 (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Cosmetic change: replace .pio_mask=0x1f with .pio_mask=ATA_PIO4 everywhere. Originally from Erik Inge Bolsø, now reworked for latest sata_mv. Signed-off-by: Erik Inge Bolsø Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 8245c82505cc..a49643d16f33 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -694,49 +694,49 @@ static struct ata_port_operations mv_iie_ops = { static const struct ata_port_info mv_port_info[] = { { /* chip_504x */ .flags = MV_GEN_I_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &mv5_ops, }, { /* chip_508x */ .flags = MV_GEN_I_FLAGS | MV_FLAG_DUAL_HC, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &mv5_ops, }, { /* chip_5080 */ .flags = MV_GEN_I_FLAGS | MV_FLAG_DUAL_HC, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &mv5_ops, }, { /* chip_604x */ .flags = MV_GEN_II_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &mv6_ops, }, { /* chip_608x */ .flags = MV_GEN_II_FLAGS | MV_FLAG_DUAL_HC, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &mv6_ops, }, { /* chip_6042 */ .flags = MV_GEN_IIE_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &mv_iie_ops, }, { /* chip_7042 */ .flags = MV_GEN_IIE_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &mv_iie_ops, }, { /* chip_soc */ .flags = MV_GEN_IIE_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ + .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &mv_iie_ops, }, -- cgit v1.2.3 From 65ad7fef10b50b6c06d6165fa847e2d3636b0a66 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Mon, 6 Apr 2009 15:24:14 -0400 Subject: sata_mv: workaround errata PCI#7 Workaround for 60x1-B2 errata PCI#7. Write-combining may be unreliable when chip operates in PCI-X mode, so disable write-combining when in PCI-X mode. Also, update the errata comments at the top of sata_mv, and include a note about errata PCI#11. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 27 +++++++++++++++++++++++---- 1 file changed, 23 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index a49643d16f33..b0c929d36234 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -28,10 +28,6 @@ /* * sata_mv TODO list: * - * --> More errata workarounds for PCI-X. - * - * --> Complete a full errata audit for all chipsets to identify others. - * * --> Develop a low-power-consumption strategy, and implement it. * * --> Add sysfs attributes for per-chip / per-HC IRQ coalescing thresholds. @@ -44,6 +40,15 @@ * connect two SATA ports. */ +/* + * 80x1-B2 errata PCI#11: + * + * Users of the 6041/6081 Rev.B2 chips (current is C0) + * should be careful to insert those cards only onto PCI-X bus #0, + * and only in device slots 0..7, not higher. The chips may not + * work correctly otherwise (note: this is a pretty rare condition). + */ + #include #include #include @@ -181,6 +186,7 @@ enum { /* PCI interface registers */ PCI_COMMAND_OFS = 0xc00, + PCI_COMMAND_MWRCOM = (1 << 4), /* PCI Master Write Combining */ PCI_COMMAND_MRDTRIG = (1 << 7), /* PCI Master Read Trigger */ PCI_MAIN_CMD_STS_OFS = 0xd30, @@ -3527,6 +3533,18 @@ static int mv_pci_cut_through_okay(struct ata_host *host) return 1; /* okay */ } +static void mv_60x1b2_errata_pci7(struct ata_host *host) +{ + struct mv_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->base; + + /* workaround for 60x1-B2 errata PCI#7 */ + if (mv_in_pcix_mode(host)) { + u32 reg = readl(mmio + PCI_COMMAND_OFS); + writelfl(reg & ~PCI_COMMAND_MWRCOM, mmio + PCI_COMMAND_OFS); + } +} + static int mv_chip_id(struct ata_host *host, unsigned int board_idx) { struct pci_dev *pdev = to_pci_dev(host->dev); @@ -3580,6 +3598,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) switch (pdev->revision) { case 0x7: + mv_60x1b2_errata_pci7(host); hp_flags |= MV_HP_ERRATA_60X1B2; break; case 0x9: -- cgit v1.2.3 From 2009177329ae565d9e9efd31b399d2f4ed4f0c44 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Mon, 6 Apr 2009 15:24:57 -0400 Subject: sata_mv: workaround errata SATA#26 Workaround for errata SATA#26. Prevents accidently putting a drive to sleep when attempting COMRESET, by ORing 0xf000 with the values written to SCR_CONTROL. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index b0c929d36234..d689fb9ceb96 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1296,7 +1296,25 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val) unsigned int ofs = mv_scr_offset(sc_reg_in); if (ofs != 0xffffffffU) { - writelfl(val, mv_ap_base(link->ap) + ofs); + void __iomem *addr = mv_ap_base(link->ap) + ofs; + if (sc_reg_in == SCR_CONTROL) { + /* + * Workaround for 88SX60x1 FEr SATA#26: + * + * COMRESETs have to take care not to accidently + * put the drive to sleep when writing SCR_CONTROL. + * Setting bits 12..15 prevents this problem. + * + * So if we see an outbound COMMRESET, set those bits. + * Ditto for the followup write that clears the reset. + * + * The proprietary driver does this for + * all chip versions, and so do we. + */ + if ((val & 0xf) == 1 || (readl(addr) & 0xf) == 1) + val |= 0xf000; + } + writelfl(val, addr); return 0; } else return -EINVAL; -- cgit v1.2.3 From ba68460b8e019dfd9c73ab69f5ed163a8b24e296 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Mon, 6 Apr 2009 15:25:39 -0400 Subject: sata_mv: cosmetic renames Add _OFS suffix to more of the register offset names, for consistency with the rest of the driver. Also tag the defines for LTMODE and PHY_MODE4 to note that read-after-write is necessary when updating those regs. No code changes here. [NOTE: this commit is undone a few commits later] Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 35 ++++++++++++++++++----------------- 1 file changed, 18 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index d689fb9ceb96..55d3ce087304 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -272,17 +272,17 @@ enum { SATA_FIS_IRQ_CAUSE_OFS = 0x364, SATA_FIS_IRQ_AN = (1 << 9), /* async notification */ - LTMODE_OFS = 0x30c, + LTMODE_OFS = 0x30c, /* requires read-after-write */ LTMODE_BIT8 = (1 << 8), /* unknown, but necessary */ - PHY_MODE3 = 0x310, - PHY_MODE4 = 0x314, + PHY_MODE2_OFS = 0x330, + PHY_MODE3_OFS = 0x310, + PHY_MODE4_OFS = 0x314, /* requires read-after-write */ PHY_MODE4_CFG_MASK = 0x00000003, /* phy internal config field */ PHY_MODE4_CFG_VALUE = 0x00000001, /* phy internal config field */ PHY_MODE4_RSVD_ZEROS = 0x5de3fffa, /* Gen2e always write zeros */ PHY_MODE4_RSVD_ONES = 0x00000005, /* Gen2e always write ones */ - PHY_MODE2 = 0x330, SATA_IFCTL_OFS = 0x344, SATA_TESTCTL_OFS = 0x348, SATA_IFSTAT_OFS = 0x34c, @@ -3168,7 +3168,7 @@ static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, } port_mmio = mv_port_base(mmio, idx); - tmp = readl(port_mmio + PHY_MODE2); + tmp = readl(port_mmio + PHY_MODE2_OFS); hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */ hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */ @@ -3192,25 +3192,25 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, u32 m2, m3; if (fix_phy_mode2) { - m2 = readl(port_mmio + PHY_MODE2); + m2 = readl(port_mmio + PHY_MODE2_OFS); m2 &= ~(1 << 16); m2 |= (1 << 31); - writel(m2, port_mmio + PHY_MODE2); + writel(m2, port_mmio + PHY_MODE2_OFS); udelay(200); - m2 = readl(port_mmio + PHY_MODE2); + m2 = readl(port_mmio + PHY_MODE2_OFS); m2 &= ~((1 << 16) | (1 << 31)); - writel(m2, port_mmio + PHY_MODE2); + writel(m2, port_mmio + PHY_MODE2_OFS); udelay(200); } /* - * Gen-II/IIe PHY_MODE3 errata RM#2: + * Gen-II/IIe PHY_MODE3_OFS errata RM#2: * Achieves better receiver noise performance than the h/w default: */ - m3 = readl(port_mmio + PHY_MODE3); + m3 = readl(port_mmio + PHY_MODE3_OFS); m3 = (m3 & 0x1f) | (0x5555601 << 5); /* Guideline 88F5182 (GL# SATA-S11) */ @@ -3218,7 +3218,7 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, m3 &= ~0x1c; if (fix_phy_mode4) { - u32 m4 = readl(port_mmio + PHY_MODE4); + u32 m4 = readl(port_mmio + PHY_MODE4_OFS); /* * Enforce reserved-bit restrictions on GenIIe devices only. * For earlier chipsets, force only the internal config field @@ -3228,17 +3228,18 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, m4 = (m4 & ~PHY_MODE4_RSVD_ZEROS) | PHY_MODE4_RSVD_ONES; else m4 = (m4 & ~PHY_MODE4_CFG_MASK) | PHY_MODE4_CFG_VALUE; - writel(m4, port_mmio + PHY_MODE4); + writel(m4, port_mmio + PHY_MODE4_OFS); } /* * Workaround for 60x1-B2 errata SATA#13: * Any write to PHY_MODE4 (above) may corrupt PHY_MODE3, * so we must always rewrite PHY_MODE3 after PHY_MODE4. + * Or ensure we use writelfl() when writing PHY_MODE4. */ - writel(m3, port_mmio + PHY_MODE3); + writel(m3, port_mmio + PHY_MODE3_OFS); /* Revert values of pre-emphasis and signal amps to the saved ones */ - m2 = readl(port_mmio + PHY_MODE2); + m2 = readl(port_mmio + PHY_MODE2_OFS); m2 &= ~MV_M2_PREAMP_MASK; m2 |= hpriv->signal[port].amps; @@ -3251,7 +3252,7 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, m2 |= 0x0000900F; } - writel(m2, port_mmio + PHY_MODE2); + writel(m2, port_mmio + PHY_MODE2_OFS); } /* TODO: use the generic LED interface to configure the SATA Presence */ @@ -3269,7 +3270,7 @@ static void mv_soc_read_preamp(struct mv_host_priv *hpriv, int idx, u32 tmp; port_mmio = mv_port_base(mmio, idx); - tmp = readl(port_mmio + PHY_MODE2); + tmp = readl(port_mmio + PHY_MODE2_OFS); hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */ hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */ -- cgit v1.2.3 From 12f3b6d7551306c00cf834540a33184de67c9187 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Mon, 6 Apr 2009 15:26:24 -0400 Subject: sata_mv: workaround errata SATA#13 Add remainder of workaround for errata SATA#13. This prevents writes of certain adjacent 32-bit registers from being combined into single 64-bit writes, which might fail for the affected registers. Most of sata_mv is already safe from this issue, but adding this code to mv_write_cached_reg() will catch the remaining cases and hopefully prevent future ones. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 55d3ce087304..82d928a426ac 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -919,8 +919,26 @@ static void mv_save_cached_regs(struct ata_port *ap) static inline void mv_write_cached_reg(void __iomem *addr, u32 *old, u32 new) { if (new != *old) { + unsigned long laddr; *old = new; - writel(new, addr); + /* + * Workaround for 88SX60x1-B2 FEr SATA#13: + * Read-after-write is needed to prevent generating 64-bit + * write cycles on the PCI bus for SATA interface registers + * at offsets ending in 0x4 or 0xc. + * + * Looks like a lot of fuss, but it avoids an unnecessary + * +1 usec read-after-write delay for unaffected registers. + */ + laddr = (long)addr & 0xffff; + if (laddr >= 0x300 && laddr <= 0x33c) { + laddr &= 0x000f; + if (laddr == 0x4 || laddr == 0xc) { + writelfl(new, addr); /* read after write */ + return; + } + } + writel(new, addr); /* unaffected by the errata */ } } -- cgit v1.2.3 From cae5a29d3c4ec7c4214966021c9ee827e66bd67b Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Mon, 6 Apr 2009 16:43:45 -0400 Subject: sata_mv: shorten register names Rename a slew of register name constants in sata_mv, removing the _OFS suffix from them, and shortening some of them in other ways as well. Also, bump up the version number to reflect all recent changes. In theory, no actual changes to the generated code, other than the version number bump. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 422 +++++++++++++++++++++++++------------------------- 1 file changed, 211 insertions(+), 211 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 82d928a426ac..fffba9b7471e 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -69,7 +69,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.27" +#define DRV_VERSION "1.28" /* * module options @@ -114,23 +114,23 @@ enum { * Coalescing defers the interrupt until either the IO_THRESHOLD * (count of completed I/Os) is met, or the TIME_THRESHOLD is met. */ - MV_COAL_REG_BASE = 0x18000, - MV_IRQ_COAL_CAUSE = (MV_COAL_REG_BASE + 0x08), + COAL_REG_BASE = 0x18000, + IRQ_COAL_CAUSE = (COAL_REG_BASE + 0x08), ALL_PORTS_COAL_IRQ = (1 << 4), /* all ports irq event */ - MV_IRQ_COAL_IO_THRESHOLD = (MV_COAL_REG_BASE + 0xcc), - MV_IRQ_COAL_TIME_THRESHOLD = (MV_COAL_REG_BASE + 0xd0), + IRQ_COAL_IO_THRESHOLD = (COAL_REG_BASE + 0xcc), + IRQ_COAL_TIME_THRESHOLD = (COAL_REG_BASE + 0xd0), /* * Registers for the (unused here) transaction coalescing feature: */ - MV_TRAN_COAL_CAUSE_LO = (MV_COAL_REG_BASE + 0x88), - MV_TRAN_COAL_CAUSE_HI = (MV_COAL_REG_BASE + 0x8c), + TRAN_COAL_CAUSE_LO = (COAL_REG_BASE + 0x88), + TRAN_COAL_CAUSE_HI = (COAL_REG_BASE + 0x8c), - MV_SATAHC0_REG_BASE = 0x20000, - MV_FLASH_CTL_OFS = 0x1046c, - MV_GPIO_PORT_CTL_OFS = 0x104f0, - MV_RESET_CFG_OFS = 0x180d8, + SATAHC0_REG_BASE = 0x20000, + FLASH_CTL = 0x1046c, + GPIO_PORT_CTL = 0x104f0, + RESET_CFG = 0x180d8, MV_PCI_REG_SZ = MV_MAJOR_REG_AREA_SZ, MV_SATAHC_REG_SZ = MV_MAJOR_REG_AREA_SZ, @@ -185,41 +185,41 @@ enum { /* PCI interface registers */ - PCI_COMMAND_OFS = 0xc00, - PCI_COMMAND_MWRCOM = (1 << 4), /* PCI Master Write Combining */ - PCI_COMMAND_MRDTRIG = (1 << 7), /* PCI Master Read Trigger */ + MV_PCI_COMMAND = 0xc00, + MV_PCI_COMMAND_MWRCOM = (1 << 4), /* PCI Master Write Combining */ + MV_PCI_COMMAND_MRDTRIG = (1 << 7), /* PCI Master Read Trigger */ - PCI_MAIN_CMD_STS_OFS = 0xd30, + PCI_MAIN_CMD_STS = 0xd30, STOP_PCI_MASTER = (1 << 2), PCI_MASTER_EMPTY = (1 << 3), GLOB_SFT_RST = (1 << 4), - MV_PCI_MODE_OFS = 0xd00, + MV_PCI_MODE = 0xd00, MV_PCI_MODE_MASK = 0x30, MV_PCI_EXP_ROM_BAR_CTL = 0xd2c, MV_PCI_DISC_TIMER = 0xd04, MV_PCI_MSI_TRIGGER = 0xc38, MV_PCI_SERR_MASK = 0xc28, - MV_PCI_XBAR_TMOUT_OFS = 0x1d04, + MV_PCI_XBAR_TMOUT = 0x1d04, MV_PCI_ERR_LOW_ADDRESS = 0x1d40, MV_PCI_ERR_HIGH_ADDRESS = 0x1d44, MV_PCI_ERR_ATTRIBUTE = 0x1d48, MV_PCI_ERR_COMMAND = 0x1d50, - PCI_IRQ_CAUSE_OFS = 0x1d58, - PCI_IRQ_MASK_OFS = 0x1d5c, + PCI_IRQ_CAUSE = 0x1d58, + PCI_IRQ_MASK = 0x1d5c, PCI_UNMASK_ALL_IRQS = 0x7fffff, /* bits 22-0 */ - PCIE_IRQ_CAUSE_OFS = 0x1900, - PCIE_IRQ_MASK_OFS = 0x1910, + PCIE_IRQ_CAUSE = 0x1900, + PCIE_IRQ_MASK = 0x1910, PCIE_UNMASK_ALL_IRQS = 0x40a, /* assorted bits */ /* Host Controller Main Interrupt Cause/Mask registers (1 per-chip) */ - PCI_HC_MAIN_IRQ_CAUSE_OFS = 0x1d60, - PCI_HC_MAIN_IRQ_MASK_OFS = 0x1d64, - SOC_HC_MAIN_IRQ_CAUSE_OFS = 0x20020, - SOC_HC_MAIN_IRQ_MASK_OFS = 0x20024, + PCI_HC_MAIN_IRQ_CAUSE = 0x1d60, + PCI_HC_MAIN_IRQ_MASK = 0x1d64, + SOC_HC_MAIN_IRQ_CAUSE = 0x20020, + SOC_HC_MAIN_IRQ_MASK = 0x20024, ERR_IRQ = (1 << 0), /* shift by (2 * port #) */ DONE_IRQ = (1 << 1), /* shift by (2 * port #) */ HC0_IRQ_PEND = 0x1ff, /* bits 0-8 = HC0's ports */ @@ -240,9 +240,9 @@ enum { HC_MAIN_RSVD_SOC = (0x3fffffb << 6), /* bits 31-9, 7-6 */ /* SATAHC registers */ - HC_CFG_OFS = 0, + HC_CFG = 0x00, - HC_IRQ_CAUSE_OFS = 0x14, + HC_IRQ_CAUSE = 0x14, DMA_IRQ = (1 << 0), /* shift by port # */ HC_COAL_IRQ = (1 << 4), /* IRQ coalescing */ DEV_IRQ = (1 << 8), /* shift by port # */ @@ -254,53 +254,54 @@ enum { * Coalescing defers the interrupt until either the IO_THRESHOLD * (count of completed I/Os) is met, or the TIME_THRESHOLD is met. */ - HC_IRQ_COAL_IO_THRESHOLD_OFS = 0x000c, - HC_IRQ_COAL_TIME_THRESHOLD_OFS = 0x0010, + HC_IRQ_COAL_IO_THRESHOLD = 0x000c, + HC_IRQ_COAL_TIME_THRESHOLD = 0x0010, - SOC_LED_CTRL_OFS = 0x2c, + SOC_LED_CTRL = 0x2c, SOC_LED_CTRL_BLINK = (1 << 0), /* Active LED blink */ SOC_LED_CTRL_ACT_PRESENCE = (1 << 2), /* Multiplex dev presence */ /* with dev activity LED */ /* Shadow block registers */ - SHD_BLK_OFS = 0x100, - SHD_CTL_AST_OFS = 0x20, /* ofs from SHD_BLK_OFS */ + SHD_BLK = 0x100, + SHD_CTL_AST = 0x20, /* ofs from SHD_BLK */ /* SATA registers */ - SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */ - SATA_ACTIVE_OFS = 0x350, - SATA_FIS_IRQ_CAUSE_OFS = 0x364, - SATA_FIS_IRQ_AN = (1 << 9), /* async notification */ + SATA_STATUS = 0x300, /* ctrl, err regs follow status */ + SATA_ACTIVE = 0x350, + FIS_IRQ_CAUSE = 0x364, + FIS_IRQ_CAUSE_AN = (1 << 9), /* async notification */ - LTMODE_OFS = 0x30c, /* requires read-after-write */ + LTMODE = 0x30c, /* requires read-after-write */ LTMODE_BIT8 = (1 << 8), /* unknown, but necessary */ - PHY_MODE2_OFS = 0x330, - PHY_MODE3_OFS = 0x310, - PHY_MODE4_OFS = 0x314, /* requires read-after-write */ + PHY_MODE2 = 0x330, + PHY_MODE3 = 0x310, + + PHY_MODE4 = 0x314, /* requires read-after-write */ PHY_MODE4_CFG_MASK = 0x00000003, /* phy internal config field */ PHY_MODE4_CFG_VALUE = 0x00000001, /* phy internal config field */ PHY_MODE4_RSVD_ZEROS = 0x5de3fffa, /* Gen2e always write zeros */ PHY_MODE4_RSVD_ONES = 0x00000005, /* Gen2e always write ones */ - SATA_IFCTL_OFS = 0x344, - SATA_TESTCTL_OFS = 0x348, - SATA_IFSTAT_OFS = 0x34c, - VENDOR_UNIQUE_FIS_OFS = 0x35c, + SATA_IFCTL = 0x344, + SATA_TESTCTL = 0x348, + SATA_IFSTAT = 0x34c, + VENDOR_UNIQUE_FIS = 0x35c, - FISCFG_OFS = 0x360, + FISCFG = 0x360, FISCFG_WAIT_DEV_ERR = (1 << 8), /* wait for host on DevErr */ FISCFG_SINGLE_SYNC = (1 << 16), /* SYNC on DMA activation */ MV5_PHY_MODE = 0x74, - MV5_LTMODE_OFS = 0x30, - MV5_PHY_CTL_OFS = 0x0C, - SATA_INTERFACE_CFG_OFS = 0x050, + MV5_LTMODE = 0x30, + MV5_PHY_CTL = 0x0C, + SATA_IFCFG = 0x050, MV_M2_PREAMP_MASK = 0x7e0, /* Port registers */ - EDMA_CFG_OFS = 0, + EDMA_CFG = 0, EDMA_CFG_Q_DEPTH = 0x1f, /* max device queue depth */ EDMA_CFG_NCQ = (1 << 5), /* for R/W FPDMA queued */ EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */ @@ -309,8 +310,8 @@ enum { EDMA_CFG_EDMA_FBS = (1 << 16), /* EDMA FIS-Based Switching */ EDMA_CFG_FBS = (1 << 26), /* FIS-Based Switching */ - EDMA_ERR_IRQ_CAUSE_OFS = 0x8, - EDMA_ERR_IRQ_MASK_OFS = 0xc, + EDMA_ERR_IRQ_CAUSE = 0x8, + EDMA_ERR_IRQ_MASK = 0xc, EDMA_ERR_D_PAR = (1 << 0), /* UDMA data parity err */ EDMA_ERR_PRD_PAR = (1 << 1), /* UDMA PRD parity err */ EDMA_ERR_DEV = (1 << 2), /* device error */ @@ -379,36 +380,36 @@ enum { EDMA_ERR_INTRL_PAR | EDMA_ERR_IORDY, - EDMA_REQ_Q_BASE_HI_OFS = 0x10, - EDMA_REQ_Q_IN_PTR_OFS = 0x14, /* also contains BASE_LO */ + EDMA_REQ_Q_BASE_HI = 0x10, + EDMA_REQ_Q_IN_PTR = 0x14, /* also contains BASE_LO */ - EDMA_REQ_Q_OUT_PTR_OFS = 0x18, + EDMA_REQ_Q_OUT_PTR = 0x18, EDMA_REQ_Q_PTR_SHIFT = 5, - EDMA_RSP_Q_BASE_HI_OFS = 0x1c, - EDMA_RSP_Q_IN_PTR_OFS = 0x20, - EDMA_RSP_Q_OUT_PTR_OFS = 0x24, /* also contains BASE_LO */ + EDMA_RSP_Q_BASE_HI = 0x1c, + EDMA_RSP_Q_IN_PTR = 0x20, + EDMA_RSP_Q_OUT_PTR = 0x24, /* also contains BASE_LO */ EDMA_RSP_Q_PTR_SHIFT = 3, - EDMA_CMD_OFS = 0x28, /* EDMA command register */ + EDMA_CMD = 0x28, /* EDMA command register */ EDMA_EN = (1 << 0), /* enable EDMA */ EDMA_DS = (1 << 1), /* disable EDMA; self-negated */ EDMA_RESET = (1 << 2), /* reset eng/trans/link/phy */ - EDMA_STATUS_OFS = 0x30, /* EDMA engine status */ + EDMA_STATUS = 0x30, /* EDMA engine status */ EDMA_STATUS_CACHE_EMPTY = (1 << 6), /* GenIIe command cache empty */ EDMA_STATUS_IDLE = (1 << 7), /* GenIIe EDMA enabled/idle */ - EDMA_IORDY_TMOUT_OFS = 0x34, - EDMA_ARB_CFG_OFS = 0x38, + EDMA_IORDY_TMOUT = 0x34, + EDMA_ARB_CFG = 0x38, - EDMA_HALTCOND_OFS = 0x60, /* GenIIe halt conditions */ - EDMA_UNKNOWN_RSVD_OFS = 0x6C, /* GenIIe unknown/reserved */ + EDMA_HALTCOND = 0x60, /* GenIIe halt conditions */ + EDMA_UNKNOWN_RSVD = 0x6C, /* GenIIe unknown/reserved */ - BMDMA_CMD_OFS = 0x224, /* bmdma command register */ - BMDMA_STATUS_OFS = 0x228, /* bmdma status register */ - BMDMA_PRD_LOW_OFS = 0x22c, /* bmdma PRD addr 31:0 */ - BMDMA_PRD_HIGH_OFS = 0x230, /* bmdma PRD addr 63:32 */ + BMDMA_CMD = 0x224, /* bmdma command register */ + BMDMA_STATUS = 0x228, /* bmdma status register */ + BMDMA_PRD_LOW = 0x22c, /* bmdma PRD addr 31:0 */ + BMDMA_PRD_HIGH = 0x230, /* bmdma PRD addr 63:32 */ /* Host private flags (hp_flags) */ MV_HP_FLAG_MSI = (1 << 0), @@ -540,8 +541,8 @@ struct mv_host_priv { void __iomem *base; void __iomem *main_irq_cause_addr; void __iomem *main_irq_mask_addr; - u32 irq_cause_ofs; - u32 irq_mask_ofs; + u32 irq_cause_offset; + u32 irq_mask_offset; u32 unmask_all_irqs; /* * These consistent DMA memory pools give us guaranteed @@ -846,7 +847,7 @@ static inline unsigned int mv_hardport_from_port(unsigned int port) static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc) { - return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ)); + return (base + SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ)); } static inline void __iomem *mv_hc_base_from_port(void __iomem *base, @@ -901,10 +902,10 @@ static void mv_save_cached_regs(struct ata_port *ap) void __iomem *port_mmio = mv_ap_base(ap); struct mv_port_priv *pp = ap->private_data; - pp->cached.fiscfg = readl(port_mmio + FISCFG_OFS); - pp->cached.ltmode = readl(port_mmio + LTMODE_OFS); - pp->cached.haltcond = readl(port_mmio + EDMA_HALTCOND_OFS); - pp->cached.unknown_rsvd = readl(port_mmio + EDMA_UNKNOWN_RSVD_OFS); + pp->cached.fiscfg = readl(port_mmio + FISCFG); + pp->cached.ltmode = readl(port_mmio + LTMODE); + pp->cached.haltcond = readl(port_mmio + EDMA_HALTCOND); + pp->cached.unknown_rsvd = readl(port_mmio + EDMA_UNKNOWN_RSVD); } /** @@ -955,10 +956,10 @@ static void mv_set_edma_ptrs(void __iomem *port_mmio, index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT; WARN_ON(pp->crqb_dma & 0x3ff); - writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS); + writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI); writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | index, - port_mmio + EDMA_REQ_Q_IN_PTR_OFS); - writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); + port_mmio + EDMA_REQ_Q_IN_PTR); + writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR); /* * initialize response queue @@ -967,10 +968,10 @@ static void mv_set_edma_ptrs(void __iomem *port_mmio, index = pp->resp_idx << EDMA_RSP_Q_PTR_SHIFT; WARN_ON(pp->crpb_dma & 0xff); - writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS); - writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); + writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI); + writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR); writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | index, - port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); + port_mmio + EDMA_RSP_Q_OUT_PTR); } static void mv_write_main_irq_mask(u32 mask, struct mv_host_priv *hpriv) @@ -1028,15 +1029,15 @@ static void mv_clear_and_enable_port_irqs(struct ata_port *ap, u32 hc_irq_cause; /* clear EDMA event indicators, if any */ - writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE); /* clear pending irq events */ hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); - writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); + writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE); /* clear FIS IRQ Cause */ if (IS_GEN_IIE(hpriv)) - writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS); + writelfl(0, port_mmio + FIS_IRQ_CAUSE); mv_enable_port_irqs(ap, port_irqs); } @@ -1072,10 +1073,10 @@ static void mv_set_irq_coalescing(struct ata_host *host, * GEN_II/GEN_IIE with dual host controllers: * one set of global thresholds for the entire chip. */ - writel(clks, mmio + MV_IRQ_COAL_TIME_THRESHOLD); - writel(count, mmio + MV_IRQ_COAL_IO_THRESHOLD); + writel(clks, mmio + IRQ_COAL_TIME_THRESHOLD); + writel(count, mmio + IRQ_COAL_IO_THRESHOLD); /* clear leftover coal IRQ bit */ - writel(~ALL_PORTS_COAL_IRQ, mmio + MV_IRQ_COAL_CAUSE); + writel(~ALL_PORTS_COAL_IRQ, mmio + IRQ_COAL_CAUSE); if (count) coal_enable = ALL_PORTS_COAL_DONE; clks = count = 0; /* force clearing of regular regs below */ @@ -1085,16 +1086,16 @@ static void mv_set_irq_coalescing(struct ata_host *host, * All chips: independent thresholds for each HC on the chip. */ hc_mmio = mv_hc_base_from_port(mmio, 0); - writel(clks, hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD_OFS); - writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD_OFS); - writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE_OFS); + writel(clks, hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD); + writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD); + writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE); if (count) coal_enable |= PORTS_0_3_COAL_DONE; if (is_dual_hc) { hc_mmio = mv_hc_base_from_port(mmio, MV_PORTS_PER_HC); - writel(clks, hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD_OFS); - writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD_OFS); - writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE_OFS); + writel(clks, hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD); + writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD); + writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE); if (count) coal_enable |= PORTS_4_7_COAL_DONE; } @@ -1132,7 +1133,7 @@ static void mv_start_edma(struct ata_port *ap, void __iomem *port_mmio, mv_set_edma_ptrs(port_mmio, hpriv, pp); mv_clear_and_enable_port_irqs(ap, port_mmio, DONE_IRQ|ERR_IRQ); - writelfl(EDMA_EN, port_mmio + EDMA_CMD_OFS); + writelfl(EDMA_EN, port_mmio + EDMA_CMD); pp->pp_flags |= MV_PP_FLAG_EDMA_EN; } } @@ -1152,7 +1153,7 @@ static void mv_wait_for_edma_empty_idle(struct ata_port *ap) * as a rough guess at what even more drives might require. */ for (i = 0; i < timeout; ++i) { - u32 edma_stat = readl(port_mmio + EDMA_STATUS_OFS); + u32 edma_stat = readl(port_mmio + EDMA_STATUS); if ((edma_stat & empty_idle) == empty_idle) break; udelay(per_loop); @@ -1172,11 +1173,11 @@ static int mv_stop_edma_engine(void __iomem *port_mmio) int i; /* Disable eDMA. The disable bit auto clears. */ - writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); + writelfl(EDMA_DS, port_mmio + EDMA_CMD); /* Wait for the chip to confirm eDMA is off. */ for (i = 10000; i > 0; i--) { - u32 reg = readl(port_mmio + EDMA_CMD_OFS); + u32 reg = readl(port_mmio + EDMA_CMD); if (!(reg & EDMA_EN)) return 0; udelay(10); @@ -1286,10 +1287,10 @@ static unsigned int mv_scr_offset(unsigned int sc_reg_in) case SCR_STATUS: case SCR_CONTROL: case SCR_ERROR: - ofs = SATA_STATUS_OFS + (sc_reg_in * sizeof(u32)); + ofs = SATA_STATUS + (sc_reg_in * sizeof(u32)); break; case SCR_ACTIVE: - ofs = SATA_ACTIVE_OFS; /* active is not with the others */ + ofs = SATA_ACTIVE; /* active is not with the others */ break; default: ofs = 0xffffffffU; @@ -1410,9 +1411,9 @@ static void mv_config_fbs(struct ata_port *ap, int want_ncq, int want_fbs) } port_mmio = mv_ap_base(ap); - mv_write_cached_reg(port_mmio + FISCFG_OFS, old_fiscfg, fiscfg); - mv_write_cached_reg(port_mmio + LTMODE_OFS, old_ltmode, ltmode); - mv_write_cached_reg(port_mmio + EDMA_HALTCOND_OFS, old_haltcond, haltcond); + mv_write_cached_reg(port_mmio + FISCFG, old_fiscfg, fiscfg); + mv_write_cached_reg(port_mmio + LTMODE, old_ltmode, ltmode); + mv_write_cached_reg(port_mmio + EDMA_HALTCOND, old_haltcond, haltcond); } static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq) @@ -1421,13 +1422,13 @@ static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq) u32 old, new; /* workaround for 88SX60x1 FEr SATA#25 (part 1) */ - old = readl(hpriv->base + MV_GPIO_PORT_CTL_OFS); + old = readl(hpriv->base + GPIO_PORT_CTL); if (want_ncq) new = old | (1 << 22); else new = old & ~(1 << 22); if (new != old) - writel(new, hpriv->base + MV_GPIO_PORT_CTL_OFS); + writel(new, hpriv->base + GPIO_PORT_CTL); } /** @@ -1451,7 +1452,7 @@ static void mv_bmdma_enable_iie(struct ata_port *ap, int enable_bmdma) new = *old | 1; else new = *old & ~1; - mv_write_cached_reg(mv_ap_base(ap) + EDMA_UNKNOWN_RSVD_OFS, old, new); + mv_write_cached_reg(mv_ap_base(ap) + EDMA_UNKNOWN_RSVD, old, new); } /* @@ -1479,8 +1480,8 @@ static void mv_soc_led_blink_enable(struct ata_port *ap) return; hpriv->hp_flags |= MV_HP_QUIRK_LED_BLINK_EN; hc_mmio = mv_hc_base_from_port(mv_host_base(host), ap->port_no); - led_ctrl = readl(hc_mmio + SOC_LED_CTRL_OFS); - writel(led_ctrl | SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL_OFS); + led_ctrl = readl(hc_mmio + SOC_LED_CTRL); + writel(led_ctrl | SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL); } static void mv_soc_led_blink_disable(struct ata_port *ap) @@ -1505,8 +1506,8 @@ static void mv_soc_led_blink_disable(struct ata_port *ap) hpriv->hp_flags &= ~MV_HP_QUIRK_LED_BLINK_EN; hc_mmio = mv_hc_base_from_port(mv_host_base(host), ap->port_no); - led_ctrl = readl(hc_mmio + SOC_LED_CTRL_OFS); - writel(led_ctrl & ~SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL_OFS); + led_ctrl = readl(hc_mmio + SOC_LED_CTRL); + writel(led_ctrl & ~SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL); } static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma) @@ -1570,7 +1571,7 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma) pp->pp_flags |= MV_PP_FLAG_NCQ_EN; } - writelfl(cfg, port_mmio + EDMA_CFG_OFS); + writelfl(cfg, port_mmio + EDMA_CFG); } static void mv_port_free_dma_mem(struct ata_port *ap) @@ -1800,13 +1801,13 @@ static void mv_bmdma_setup(struct ata_queued_cmd *qc) mv_fill_sg(qc); /* clear all DMA cmd bits */ - writel(0, port_mmio + BMDMA_CMD_OFS); + writel(0, port_mmio + BMDMA_CMD); /* load PRD table addr. */ writel((pp->sg_tbl_dma[qc->tag] >> 16) >> 16, - port_mmio + BMDMA_PRD_HIGH_OFS); + port_mmio + BMDMA_PRD_HIGH); writelfl(pp->sg_tbl_dma[qc->tag], - port_mmio + BMDMA_PRD_LOW_OFS); + port_mmio + BMDMA_PRD_LOW); /* issue r/w command */ ap->ops->sff_exec_command(ap, &qc->tf); @@ -1827,7 +1828,7 @@ static void mv_bmdma_start(struct ata_queued_cmd *qc) u32 cmd = (rw ? 0 : ATA_DMA_WR) | ATA_DMA_START; /* start host DMA transaction */ - writelfl(cmd, port_mmio + BMDMA_CMD_OFS); + writelfl(cmd, port_mmio + BMDMA_CMD); } /** @@ -1846,9 +1847,9 @@ static void mv_bmdma_stop(struct ata_queued_cmd *qc) u32 cmd; /* clear start/stop bit */ - cmd = readl(port_mmio + BMDMA_CMD_OFS); + cmd = readl(port_mmio + BMDMA_CMD); cmd &= ~ATA_DMA_START; - writelfl(cmd, port_mmio + BMDMA_CMD_OFS); + writelfl(cmd, port_mmio + BMDMA_CMD); /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ ata_sff_dma_pause(ap); @@ -1872,7 +1873,7 @@ static u8 mv_bmdma_status(struct ata_port *ap) * Other bits are valid only if ATA_DMA_ACTIVE==0, * and the ATA_DMA_INTR bit doesn't exist. */ - reg = readl(port_mmio + BMDMA_STATUS_OFS); + reg = readl(port_mmio + BMDMA_STATUS); if (reg & ATA_DMA_ACTIVE) status = ATA_DMA_ACTIVE; else @@ -2080,28 +2081,28 @@ static unsigned int mv_send_fis(struct ata_port *ap, u32 *fis, int nwords) int i, timeout = 200, final_word = nwords - 1; /* Initiate FIS transmission mode */ - old_ifctl = readl(port_mmio + SATA_IFCTL_OFS); + old_ifctl = readl(port_mmio + SATA_IFCTL); ifctl = 0x100 | (old_ifctl & 0xf); - writelfl(ifctl, port_mmio + SATA_IFCTL_OFS); + writelfl(ifctl, port_mmio + SATA_IFCTL); /* Send all words of the FIS except for the final word */ for (i = 0; i < final_word; ++i) - writel(fis[i], port_mmio + VENDOR_UNIQUE_FIS_OFS); + writel(fis[i], port_mmio + VENDOR_UNIQUE_FIS); /* Flag end-of-transmission, and then send the final word */ - writelfl(ifctl | 0x200, port_mmio + SATA_IFCTL_OFS); - writelfl(fis[final_word], port_mmio + VENDOR_UNIQUE_FIS_OFS); + writelfl(ifctl | 0x200, port_mmio + SATA_IFCTL); + writelfl(fis[final_word], port_mmio + VENDOR_UNIQUE_FIS); /* * Wait for FIS transmission to complete. * This typically takes just a single iteration. */ do { - ifstat = readl(port_mmio + SATA_IFSTAT_OFS); + ifstat = readl(port_mmio + SATA_IFSTAT); } while (!(ifstat & 0x1000) && --timeout); /* Restore original port configuration */ - writelfl(old_ifctl, port_mmio + SATA_IFCTL_OFS); + writelfl(old_ifctl, port_mmio + SATA_IFCTL); /* See if it worked */ if ((ifstat & 0x3000) != 0x1000) { @@ -2199,7 +2200,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) /* Write the request in pointer to kick the EDMA to life */ writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index, - port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + port_mmio + EDMA_REQ_Q_IN_PTR); return 0; case ATA_PROT_PIO: @@ -2310,7 +2311,7 @@ static unsigned int mv_get_err_pmp_map(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); - return readl(port_mmio + SATA_TESTCTL_OFS) >> 16; + return readl(port_mmio + SATA_TESTCTL) >> 16; } static void mv_pmp_eh_prep(struct ata_port *ap, unsigned int pmp_map) @@ -2343,9 +2344,9 @@ static int mv_req_q_empty(struct ata_port *ap) void __iomem *port_mmio = mv_ap_base(ap); u32 in_ptr, out_ptr; - in_ptr = (readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS) + in_ptr = (readl(port_mmio + EDMA_REQ_Q_IN_PTR) >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; - out_ptr = (readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) + out_ptr = (readl(port_mmio + EDMA_REQ_Q_OUT_PTR) >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; return (in_ptr == out_ptr); /* 1 == queue_is_empty */ } @@ -2507,12 +2508,12 @@ static void mv_err_intr(struct ata_port *ap) sata_scr_read(&ap->link, SCR_ERROR, &serr); sata_scr_write_flush(&ap->link, SCR_ERROR, serr); - edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE); if (IS_GEN_IIE(hpriv) && (edma_err_cause & EDMA_ERR_TRANS_IRQ_7)) { - fis_cause = readl(port_mmio + SATA_FIS_IRQ_CAUSE_OFS); - writelfl(~fis_cause, port_mmio + SATA_FIS_IRQ_CAUSE_OFS); + fis_cause = readl(port_mmio + FIS_IRQ_CAUSE); + writelfl(~fis_cause, port_mmio + FIS_IRQ_CAUSE); } - writelfl(~edma_err_cause, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + writelfl(~edma_err_cause, port_mmio + EDMA_ERR_IRQ_CAUSE); if (edma_err_cause & EDMA_ERR_DEV) { /* @@ -2530,7 +2531,7 @@ static void mv_err_intr(struct ata_port *ap) if (IS_GEN_IIE(hpriv) && (edma_err_cause & EDMA_ERR_TRANS_IRQ_7)) { ata_ehi_push_desc(ehi, "fis_cause=%08x", fis_cause); - if (fis_cause & SATA_FIS_IRQ_AN) { + if (fis_cause & FIS_IRQ_CAUSE_AN) { u32 ec = edma_err_cause & ~(EDMA_ERR_TRANS_IRQ_7 | EDMA_ERR_IRQ_TRANSIENT); sata_async_notification(ap); @@ -2632,7 +2633,7 @@ static void mv_process_crpb_response(struct ata_port *ap, u16 edma_status = le16_to_cpu(response->flags); /* * edma_status from a response queue entry: - * LSB is from EDMA_ERR_IRQ_CAUSE_OFS (non-NCQ only). + * LSB is from EDMA_ERR_IRQ_CAUSE (non-NCQ only). * MSB is saved ATA status from command completion. */ if (!ncq_enabled) { @@ -2664,7 +2665,7 @@ static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp int ncq_enabled = (pp->pp_flags & MV_PP_FLAG_NCQ_EN); /* Get the hardware queue position index */ - in_index = (readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) + in_index = (readl(port_mmio + EDMA_RSP_Q_IN_PTR) >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; /* Process new responses from since the last time we looked */ @@ -2689,7 +2690,7 @@ static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp if (work_done) writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | (pp->resp_idx << EDMA_RSP_Q_PTR_SHIFT), - port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); + port_mmio + EDMA_RSP_Q_OUT_PTR); } static void mv_port_intr(struct ata_port *ap, u32 port_cause) @@ -2746,7 +2747,7 @@ static int mv_host_intr(struct ata_host *host, u32 main_irq_cause) /* If asserted, clear the "all ports" IRQ coalescing bit */ if (main_irq_cause & ALL_PORTS_COAL_DONE) - writel(~ALL_PORTS_COAL_IRQ, mmio + MV_IRQ_COAL_CAUSE); + writel(~ALL_PORTS_COAL_IRQ, mmio + IRQ_COAL_CAUSE); for (port = 0; port < hpriv->n_ports; port++) { struct ata_port *ap = host->ports[port]; @@ -2790,7 +2791,7 @@ static int mv_host_intr(struct ata_host *host, u32 main_irq_cause) ack_irqs |= (DMA_IRQ | DEV_IRQ) << p; } hc_mmio = mv_hc_base_from_port(mmio, port); - writelfl(~ack_irqs, hc_mmio + HC_IRQ_CAUSE_OFS); + writelfl(~ack_irqs, hc_mmio + HC_IRQ_CAUSE); handled = 1; } /* @@ -2812,7 +2813,7 @@ static int mv_pci_error(struct ata_host *host, void __iomem *mmio) unsigned int i, err_mask, printed = 0; u32 err_cause; - err_cause = readl(mmio + hpriv->irq_cause_ofs); + err_cause = readl(mmio + hpriv->irq_cause_offset); dev_printk(KERN_ERR, host->dev, "PCI ERROR; PCI IRQ cause=0x%08x\n", err_cause); @@ -2820,7 +2821,7 @@ static int mv_pci_error(struct ata_host *host, void __iomem *mmio) DPRINTK("All regs @ PCI error\n"); mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev)); - writelfl(0, mmio + hpriv->irq_cause_ofs); + writelfl(0, mmio + hpriv->irq_cause_offset); for (i = 0; i < host->n_ports; i++) { ap = host->ports[i]; @@ -2957,7 +2958,7 @@ static void mv5_reset_bus(struct ata_host *host, void __iomem *mmio) static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio) { - writel(0x0fcfffff, mmio + MV_FLASH_CTL_OFS); + writel(0x0fcfffff, mmio + FLASH_CTL); } static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx, @@ -2976,7 +2977,7 @@ static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) { u32 tmp; - writel(0, mmio + MV_GPIO_PORT_CTL_OFS); + writel(0, mmio + GPIO_PORT_CTL); /* FIXME: handle MV_HP_ERRATA_50XXB2 errata */ @@ -2994,14 +2995,14 @@ static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, int fix_apm_sq = (hpriv->hp_flags & MV_HP_ERRATA_50XXB0); if (fix_apm_sq) { - tmp = readl(phy_mmio + MV5_LTMODE_OFS); + tmp = readl(phy_mmio + MV5_LTMODE); tmp |= (1 << 19); - writel(tmp, phy_mmio + MV5_LTMODE_OFS); + writel(tmp, phy_mmio + MV5_LTMODE); - tmp = readl(phy_mmio + MV5_PHY_CTL_OFS); + tmp = readl(phy_mmio + MV5_PHY_CTL); tmp &= ~0x3; tmp |= 0x1; - writel(tmp, phy_mmio + MV5_PHY_CTL_OFS); + writel(tmp, phy_mmio + MV5_PHY_CTL); } tmp = readl(phy_mmio + MV5_PHY_MODE); @@ -3022,7 +3023,7 @@ static void mv5_reset_hc_port(struct mv_host_priv *hpriv, void __iomem *mmio, mv_reset_channel(hpriv, mmio, port); ZERO(0x028); /* command */ - writel(0x11f, port_mmio + EDMA_CFG_OFS); + writel(0x11f, port_mmio + EDMA_CFG); ZERO(0x004); /* timer */ ZERO(0x008); /* irq err cause */ ZERO(0x00c); /* irq err mask */ @@ -3033,7 +3034,7 @@ static void mv5_reset_hc_port(struct mv_host_priv *hpriv, void __iomem *mmio, ZERO(0x024); /* respq outp */ ZERO(0x020); /* respq inp */ ZERO(0x02c); /* test control */ - writel(0xbc, port_mmio + EDMA_IORDY_TMOUT_OFS); + writel(0xbc, port_mmio + EDMA_IORDY_TMOUT); } #undef ZERO @@ -3079,16 +3080,16 @@ static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio) struct mv_host_priv *hpriv = host->private_data; u32 tmp; - tmp = readl(mmio + MV_PCI_MODE_OFS); + tmp = readl(mmio + MV_PCI_MODE); tmp &= 0xff00ffff; - writel(tmp, mmio + MV_PCI_MODE_OFS); + writel(tmp, mmio + MV_PCI_MODE); ZERO(MV_PCI_DISC_TIMER); ZERO(MV_PCI_MSI_TRIGGER); - writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT_OFS); + writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT); ZERO(MV_PCI_SERR_MASK); - ZERO(hpriv->irq_cause_ofs); - ZERO(hpriv->irq_mask_ofs); + ZERO(hpriv->irq_cause_offset); + ZERO(hpriv->irq_mask_offset); ZERO(MV_PCI_ERR_LOW_ADDRESS); ZERO(MV_PCI_ERR_HIGH_ADDRESS); ZERO(MV_PCI_ERR_ATTRIBUTE); @@ -3102,10 +3103,10 @@ static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio) mv5_reset_flash(hpriv, mmio); - tmp = readl(mmio + MV_GPIO_PORT_CTL_OFS); + tmp = readl(mmio + GPIO_PORT_CTL); tmp &= 0x3; tmp |= (1 << 5) | (1 << 6); - writel(tmp, mmio + MV_GPIO_PORT_CTL_OFS); + writel(tmp, mmio + GPIO_PORT_CTL); } /** @@ -3120,7 +3121,7 @@ static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio) static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, unsigned int n_hc) { - void __iomem *reg = mmio + PCI_MAIN_CMD_STS_OFS; + void __iomem *reg = mmio + PCI_MAIN_CMD_STS; int i, rc = 0; u32 t; @@ -3178,7 +3179,7 @@ static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, void __iomem *port_mmio; u32 tmp; - tmp = readl(mmio + MV_RESET_CFG_OFS); + tmp = readl(mmio + RESET_CFG); if ((tmp & (1 << 0)) == 0) { hpriv->signal[idx].amps = 0x7 << 8; hpriv->signal[idx].pre = 0x1 << 5; @@ -3186,7 +3187,7 @@ static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, } port_mmio = mv_port_base(mmio, idx); - tmp = readl(port_mmio + PHY_MODE2_OFS); + tmp = readl(port_mmio + PHY_MODE2); hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */ hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */ @@ -3194,7 +3195,7 @@ static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) { - writel(0x00000060, mmio + MV_GPIO_PORT_CTL_OFS); + writel(0x00000060, mmio + GPIO_PORT_CTL); } static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, @@ -3210,25 +3211,25 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, u32 m2, m3; if (fix_phy_mode2) { - m2 = readl(port_mmio + PHY_MODE2_OFS); + m2 = readl(port_mmio + PHY_MODE2); m2 &= ~(1 << 16); m2 |= (1 << 31); - writel(m2, port_mmio + PHY_MODE2_OFS); + writel(m2, port_mmio + PHY_MODE2); udelay(200); - m2 = readl(port_mmio + PHY_MODE2_OFS); + m2 = readl(port_mmio + PHY_MODE2); m2 &= ~((1 << 16) | (1 << 31)); - writel(m2, port_mmio + PHY_MODE2_OFS); + writel(m2, port_mmio + PHY_MODE2); udelay(200); } /* - * Gen-II/IIe PHY_MODE3_OFS errata RM#2: + * Gen-II/IIe PHY_MODE3 errata RM#2: * Achieves better receiver noise performance than the h/w default: */ - m3 = readl(port_mmio + PHY_MODE3_OFS); + m3 = readl(port_mmio + PHY_MODE3); m3 = (m3 & 0x1f) | (0x5555601 << 5); /* Guideline 88F5182 (GL# SATA-S11) */ @@ -3236,7 +3237,7 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, m3 &= ~0x1c; if (fix_phy_mode4) { - u32 m4 = readl(port_mmio + PHY_MODE4_OFS); + u32 m4 = readl(port_mmio + PHY_MODE4); /* * Enforce reserved-bit restrictions on GenIIe devices only. * For earlier chipsets, force only the internal config field @@ -3246,7 +3247,7 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, m4 = (m4 & ~PHY_MODE4_RSVD_ZEROS) | PHY_MODE4_RSVD_ONES; else m4 = (m4 & ~PHY_MODE4_CFG_MASK) | PHY_MODE4_CFG_VALUE; - writel(m4, port_mmio + PHY_MODE4_OFS); + writel(m4, port_mmio + PHY_MODE4); } /* * Workaround for 60x1-B2 errata SATA#13: @@ -3254,10 +3255,10 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, * so we must always rewrite PHY_MODE3 after PHY_MODE4. * Or ensure we use writelfl() when writing PHY_MODE4. */ - writel(m3, port_mmio + PHY_MODE3_OFS); + writel(m3, port_mmio + PHY_MODE3); /* Revert values of pre-emphasis and signal amps to the saved ones */ - m2 = readl(port_mmio + PHY_MODE2_OFS); + m2 = readl(port_mmio + PHY_MODE2); m2 &= ~MV_M2_PREAMP_MASK; m2 |= hpriv->signal[port].amps; @@ -3270,7 +3271,7 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, m2 |= 0x0000900F; } - writel(m2, port_mmio + PHY_MODE2_OFS); + writel(m2, port_mmio + PHY_MODE2); } /* TODO: use the generic LED interface to configure the SATA Presence */ @@ -3288,7 +3289,7 @@ static void mv_soc_read_preamp(struct mv_host_priv *hpriv, int idx, u32 tmp; port_mmio = mv_port_base(mmio, idx); - tmp = readl(port_mmio + PHY_MODE2_OFS); + tmp = readl(port_mmio + PHY_MODE2); hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */ hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */ @@ -3304,7 +3305,7 @@ static void mv_soc_reset_hc_port(struct mv_host_priv *hpriv, mv_reset_channel(hpriv, mmio, port); ZERO(0x028); /* command */ - writel(0x101f, port_mmio + EDMA_CFG_OFS); + writel(0x101f, port_mmio + EDMA_CFG); ZERO(0x004); /* timer */ ZERO(0x008); /* irq err cause */ ZERO(0x00c); /* irq err mask */ @@ -3315,7 +3316,7 @@ static void mv_soc_reset_hc_port(struct mv_host_priv *hpriv, ZERO(0x024); /* respq outp */ ZERO(0x020); /* respq inp */ ZERO(0x02c); /* test control */ - writel(0xbc, port_mmio + EDMA_IORDY_TMOUT_OFS); + writel(0xbc, port_mmio + EDMA_IORDY_TMOUT); } #undef ZERO @@ -3360,12 +3361,12 @@ static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio) static void mv_setup_ifcfg(void __iomem *port_mmio, int want_gen2i) { - u32 ifcfg = readl(port_mmio + SATA_INTERFACE_CFG_OFS); + u32 ifcfg = readl(port_mmio + SATA_IFCFG); ifcfg = (ifcfg & 0xf7f) | 0x9b1000; /* from chip spec */ if (want_gen2i) ifcfg |= (1 << 7); /* enable gen2i speed */ - writelfl(ifcfg, port_mmio + SATA_INTERFACE_CFG_OFS); + writelfl(ifcfg, port_mmio + SATA_IFCFG); } static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio, @@ -3379,7 +3380,7 @@ static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio, * to disable the EDMA engine before doing the EDMA_RESET operation. */ mv_stop_edma_engine(port_mmio); - writelfl(EDMA_RESET, port_mmio + EDMA_CMD_OFS); + writelfl(EDMA_RESET, port_mmio + EDMA_CMD); if (!IS_GEN_I(hpriv)) { /* Enable 3.0gb/s link speed: this survives EDMA_RESET */ @@ -3388,11 +3389,11 @@ static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio, /* * Strobing EDMA_RESET here causes a hard reset of the SATA transport, * link, and physical layers. It resets all SATA interface registers - * (except for SATA_INTERFACE_CFG), and issues a COMRESET to the dev. + * (except for SATA_IFCFG), and issues a COMRESET to the dev. */ - writelfl(EDMA_RESET, port_mmio + EDMA_CMD_OFS); + writelfl(EDMA_RESET, port_mmio + EDMA_CMD); udelay(25); /* allow reset propagation */ - writelfl(0, port_mmio + EDMA_CMD_OFS); + writelfl(0, port_mmio + EDMA_CMD); hpriv->ops->phy_errata(hpriv, mmio, port_no); @@ -3404,12 +3405,12 @@ static void mv_pmp_select(struct ata_port *ap, int pmp) { if (sata_pmp_supported(ap)) { void __iomem *port_mmio = mv_ap_base(ap); - u32 reg = readl(port_mmio + SATA_IFCTL_OFS); + u32 reg = readl(port_mmio + SATA_IFCTL); int old = reg & 0xf; if (old != pmp) { reg = (reg & ~0xf) | pmp; - writelfl(reg, port_mmio + SATA_IFCTL_OFS); + writelfl(reg, port_mmio + SATA_IFCTL); } } } @@ -3484,11 +3485,11 @@ static void mv_eh_thaw(struct ata_port *ap) u32 hc_irq_cause; /* clear EDMA errors on this port */ - writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE); /* clear pending irq events */ hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); - writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); + writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE); mv_enable_port_irqs(ap, ERR_IRQ); } @@ -3507,8 +3508,7 @@ static void mv_eh_thaw(struct ata_port *ap) */ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) { - void __iomem *shd_base = port_mmio + SHD_BLK_OFS; - unsigned serr_ofs; + void __iomem *serr, *shd_base = port_mmio + SHD_BLK; /* PIO related setup */ @@ -3523,23 +3523,23 @@ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) port->status_addr = port->command_addr = shd_base + (sizeof(u32) * ATA_REG_STATUS); /* special case: control/altstatus doesn't have ATA_REG_ address */ - port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS; + port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST; /* unused: */ port->cmd_addr = port->bmdma_addr = port->scr_addr = NULL; /* Clear any currently outstanding port interrupt conditions */ - serr_ofs = mv_scr_offset(SCR_ERROR); - writelfl(readl(port_mmio + serr_ofs), port_mmio + serr_ofs); - writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + serr = port_mmio + mv_scr_offset(SCR_ERROR); + writelfl(readl(serr), serr); + writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE); /* unmask all non-transient EDMA error interrupts */ - writelfl(~EDMA_ERR_IRQ_TRANSIENT, port_mmio + EDMA_ERR_IRQ_MASK_OFS); + writelfl(~EDMA_ERR_IRQ_TRANSIENT, port_mmio + EDMA_ERR_IRQ_MASK); VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n", - readl(port_mmio + EDMA_CFG_OFS), - readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS), - readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS)); + readl(port_mmio + EDMA_CFG), + readl(port_mmio + EDMA_ERR_IRQ_CAUSE), + readl(port_mmio + EDMA_ERR_IRQ_MASK)); } static unsigned int mv_in_pcix_mode(struct ata_host *host) @@ -3550,7 +3550,7 @@ static unsigned int mv_in_pcix_mode(struct ata_host *host) if (IS_SOC(hpriv) || !IS_PCIE(hpriv)) return 0; /* not PCI-X capable */ - reg = readl(mmio + MV_PCI_MODE_OFS); + reg = readl(mmio + MV_PCI_MODE); if ((reg & MV_PCI_MODE_MASK) == 0) return 0; /* conventional PCI mode */ return 1; /* chip is in PCI-X mode */ @@ -3563,8 +3563,8 @@ static int mv_pci_cut_through_okay(struct ata_host *host) u32 reg; if (!mv_in_pcix_mode(host)) { - reg = readl(mmio + PCI_COMMAND_OFS); - if (reg & PCI_COMMAND_MRDTRIG) + reg = readl(mmio + MV_PCI_COMMAND); + if (reg & MV_PCI_COMMAND_MRDTRIG) return 0; /* not okay */ } return 1; /* okay */ @@ -3577,8 +3577,8 @@ static void mv_60x1b2_errata_pci7(struct ata_host *host) /* workaround for 60x1-B2 errata PCI#7 */ if (mv_in_pcix_mode(host)) { - u32 reg = readl(mmio + PCI_COMMAND_OFS); - writelfl(reg & ~PCI_COMMAND_MWRCOM, mmio + PCI_COMMAND_OFS); + u32 reg = readl(mmio + MV_PCI_COMMAND); + writelfl(reg & ~MV_PCI_COMMAND_MWRCOM, mmio + MV_PCI_COMMAND); } } @@ -3712,12 +3712,12 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) hpriv->hp_flags = hp_flags; if (hp_flags & MV_HP_PCIE) { - hpriv->irq_cause_ofs = PCIE_IRQ_CAUSE_OFS; - hpriv->irq_mask_ofs = PCIE_IRQ_MASK_OFS; + hpriv->irq_cause_offset = PCIE_IRQ_CAUSE; + hpriv->irq_mask_offset = PCIE_IRQ_MASK; hpriv->unmask_all_irqs = PCIE_UNMASK_ALL_IRQS; } else { - hpriv->irq_cause_ofs = PCI_IRQ_CAUSE_OFS; - hpriv->irq_mask_ofs = PCI_IRQ_MASK_OFS; + hpriv->irq_cause_offset = PCI_IRQ_CAUSE; + hpriv->irq_mask_offset = PCI_IRQ_MASK; hpriv->unmask_all_irqs = PCI_UNMASK_ALL_IRQS; } @@ -3746,11 +3746,11 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) goto done; if (IS_SOC(hpriv)) { - hpriv->main_irq_cause_addr = mmio + SOC_HC_MAIN_IRQ_CAUSE_OFS; - hpriv->main_irq_mask_addr = mmio + SOC_HC_MAIN_IRQ_MASK_OFS; + hpriv->main_irq_cause_addr = mmio + SOC_HC_MAIN_IRQ_CAUSE; + hpriv->main_irq_mask_addr = mmio + SOC_HC_MAIN_IRQ_MASK; } else { - hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS; - hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS; + hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE; + hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK; } /* initialize shadow irq mask with register's value */ @@ -3792,19 +3792,19 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) VPRINTK("HC%i: HC config=0x%08x HC IRQ cause " "(before clear)=0x%08x\n", hc, - readl(hc_mmio + HC_CFG_OFS), - readl(hc_mmio + HC_IRQ_CAUSE_OFS)); + readl(hc_mmio + HC_CFG), + readl(hc_mmio + HC_IRQ_CAUSE)); /* Clear any currently outstanding hc interrupt conditions */ - writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); + writelfl(0, hc_mmio + HC_IRQ_CAUSE); } if (!IS_SOC(hpriv)) { /* Clear any currently outstanding host interrupt conditions */ - writelfl(0, mmio + hpriv->irq_cause_ofs); + writelfl(0, mmio + hpriv->irq_cause_offset); /* and unmask interrupt generation for host regs */ - writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs); + writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_offset); } /* @@ -3911,7 +3911,7 @@ static int mv_platform_probe(struct platform_device *pdev) host->iomap = NULL; hpriv->base = devm_ioremap(&pdev->dev, res->start, res->end - res->start + 1); - hpriv->base -= MV_SATAHC0_REG_BASE; + hpriv->base -= SATAHC0_REG_BASE; /* * (Re-)program MBUS remapping windows if we are asked to. -- cgit v1.2.3