From 2907f851f64a2f1ec5d75e60740e0819a660c5c0 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 9 Nov 2020 11:59:41 +0100 Subject: xsysace: Remove SYSACE driver Sysace IP is no longer used on Xilinx PowerPC 405/440 and Microblaze systems. The driver is not regularly tested and very likely not working for quite a long time that's why remove it. Signed-off-by: Michal Simek Signed-off-by: Jens Axboe --- drivers/block/Kconfig | 6 - drivers/block/Makefile | 1 - drivers/block/xsysace.c | 1273 ----------------------------------------------- 3 files changed, 1280 deletions(-) delete mode 100644 drivers/block/xsysace.c (limited to 'drivers') diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index fd236158f32d..b99d7bb7c6d3 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -378,12 +378,6 @@ config SUNVDC source "drivers/s390/block/Kconfig" -config XILINX_SYSACE - tristate "Xilinx SystemACE support" - depends on 4xx || MICROBLAZE - help - Include support for the Xilinx SystemACE CompactFlash interface - config XEN_BLKDEV_FRONTEND tristate "Xen virtual block device support" depends on XEN diff --git a/drivers/block/Makefile b/drivers/block/Makefile index e3e3f1c79a82..7c1fb4ae8fac 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -20,7 +20,6 @@ obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o obj-$(CONFIG_N64CART) += n64cart.o obj-$(CONFIG_BLK_DEV_RAM) += brd.o obj-$(CONFIG_BLK_DEV_LOOP) += loop.o -obj-$(CONFIG_XILINX_SYSACE) += xsysace.o obj-$(CONFIG_CDROM_PKTCDVD) += pktcdvd.o obj-$(CONFIG_SUNVDC) += sunvdc.o diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c deleted file mode 100644 index eb8ef65778c3..000000000000 --- a/drivers/block/xsysace.c +++ /dev/null @@ -1,1273 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Xilinx SystemACE device driver - * - * Copyright 2007 Secret Lab Technologies Ltd. - */ - -/* - * The SystemACE chip is designed to configure FPGAs by loading an FPGA - * bitstream from a file on a CF card and squirting it into FPGAs connected - * to the SystemACE JTAG chain. It also has the advantage of providing an - * MPU interface which can be used to control the FPGA configuration process - * and to use the attached CF card for general purpose storage. - * - * This driver is a block device driver for the SystemACE. - * - * Initialization: - * The driver registers itself as a platform_device driver at module - * load time. The platform bus will take care of calling the - * ace_probe() method for all SystemACE instances in the system. Any - * number of SystemACE instances are supported. ace_probe() calls - * ace_setup() which initialized all data structures, reads the CF - * id structure and registers the device. - * - * Processing: - * Just about all of the heavy lifting in this driver is performed by - * a Finite State Machine (FSM). The driver needs to wait on a number - * of events; some raised by interrupts, some which need to be polled - * for. Describing all of the behaviour in a FSM seems to be the - * easiest way to keep the complexity low and make it easy to - * understand what the driver is doing. If the block ops or the - * request function need to interact with the hardware, then they - * simply need to flag the request and kick of FSM processing. - * - * The FSM itself is atomic-safe code which can be run from any - * context. The general process flow is: - * 1. obtain the ace->lock spinlock. - * 2. loop on ace_fsm_dostate() until the ace->fsm_continue flag is - * cleared. - * 3. release the lock. - * - * Individual states do not sleep in any way. If a condition needs to - * be waited for then the state much clear the fsm_continue flag and - * either schedule the FSM to be run again at a later time, or expect - * an interrupt to call the FSM when the desired condition is met. - * - * In normal operation, the FSM is processed at interrupt context - * either when the driver's tasklet is scheduled, or when an irq is - * raised by the hardware. The tasklet can be scheduled at any time. - * The request method in particular schedules the tasklet when a new - * request has been indicated by the block layer. Once started, the - * FSM proceeds as far as it can processing the request until it - * needs on a hardware event. At this point, it must yield execution. - * - * A state has two options when yielding execution: - * 1. ace_fsm_yield() - * - Call if need to poll for event. - * - clears the fsm_continue flag to exit the processing loop - * - reschedules the tasklet to run again as soon as possible - * 2. ace_fsm_yieldirq() - * - Call if an irq is expected from the HW - * - clears the fsm_continue flag to exit the processing loop - * - does not reschedule the tasklet so the FSM will not be processed - * again until an irq is received. - * After calling a yield function, the state must return control back - * to the FSM main loop. - * - * Additionally, the driver maintains a kernel timer which can process - * the FSM. If the FSM gets stalled, typically due to a missed - * interrupt, then the kernel timer will expire and the driver can - * continue where it left off. - * - * To Do: - * - Add FPGA configuration control interface. - * - Request major number from lanana - */ - -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#if defined(CONFIG_OF) -#include -#include -#include -#endif - -MODULE_AUTHOR("Grant Likely "); -MODULE_DESCRIPTION("Xilinx SystemACE device driver"); -MODULE_LICENSE("GPL"); - -/* SystemACE register definitions */ -#define ACE_BUSMODE (0x00) - -#define ACE_STATUS (0x04) -#define ACE_STATUS_CFGLOCK (0x00000001) -#define ACE_STATUS_MPULOCK (0x00000002) -#define ACE_STATUS_CFGERROR (0x00000004) /* config controller error */ -#define ACE_STATUS_CFCERROR (0x00000008) /* CF controller error */ -#define ACE_STATUS_CFDETECT (0x00000010) -#define ACE_STATUS_DATABUFRDY (0x00000020) -#define ACE_STATUS_DATABUFMODE (0x00000040) -#define ACE_STATUS_CFGDONE (0x00000080) -#define ACE_STATUS_RDYFORCFCMD (0x00000100) -#define ACE_STATUS_CFGMODEPIN (0x00000200) -#define ACE_STATUS_CFGADDR_MASK (0x0000e000) -#define ACE_STATUS_CFBSY (0x00020000) -#define ACE_STATUS_CFRDY (0x00040000) -#define ACE_STATUS_CFDWF (0x00080000) -#define ACE_STATUS_CFDSC (0x00100000) -#define ACE_STATUS_CFDRQ (0x00200000) -#define ACE_STATUS_CFCORR (0x00400000) -#define ACE_STATUS_CFERR (0x00800000) - -#define ACE_ERROR (0x08) -#define ACE_CFGLBA (0x0c) -#define ACE_MPULBA (0x10) - -#define ACE_SECCNTCMD (0x14) -#define ACE_SECCNTCMD_RESET (0x0100) -#define ACE_SECCNTCMD_IDENTIFY (0x0200) -#define ACE_SECCNTCMD_READ_DATA (0x0300) -#define ACE_SECCNTCMD_WRITE_DATA (0x0400) -#define ACE_SECCNTCMD_ABORT (0x0600) - -#define ACE_VERSION (0x16) -#define ACE_VERSION_REVISION_MASK (0x00FF) -#define ACE_VERSION_MINOR_MASK (0x0F00) -#define ACE_VERSION_MAJOR_MASK (0xF000) - -#define ACE_CTRL (0x18) -#define ACE_CTRL_FORCELOCKREQ (0x0001) -#define ACE_CTRL_LOCKREQ (0x0002) -#define ACE_CTRL_FORCECFGADDR (0x0004) -#define ACE_CTRL_FORCECFGMODE (0x0008) -#define ACE_CTRL_CFGMODE (0x0010) -#define ACE_CTRL_CFGSTART (0x0020) -#define ACE_CTRL_CFGSEL (0x0040) -#define ACE_CTRL_CFGRESET (0x0080) -#define ACE_CTRL_DATABUFRDYIRQ (0x0100) -#define ACE_CTRL_ERRORIRQ (0x0200) -#define ACE_CTRL_CFGDONEIRQ (0x0400) -#define ACE_CTRL_RESETIRQ (0x0800) -#define ACE_CTRL_CFGPROG (0x1000) -#define ACE_CTRL_CFGADDR_MASK (0xe000) - -#define ACE_FATSTAT (0x1c) - -#define ACE_NUM_MINORS 16 -#define ACE_SECTOR_SIZE (512) -#define ACE_FIFO_SIZE (32) -#define ACE_BUF_PER_SECTOR (ACE_SECTOR_SIZE / ACE_FIFO_SIZE) - -#define ACE_BUS_WIDTH_8 0 -#define ACE_BUS_WIDTH_16 1 - -struct ace_reg_ops; - -struct ace_device { - /* driver state data */ - int id; - int media_change; - int users; - struct list_head list; - - /* finite state machine data */ - struct tasklet_struct fsm_tasklet; - uint fsm_task; /* Current activity (ACE_TASK_*) */ - uint fsm_state; /* Current state (ACE_FSM_STATE_*) */ - uint fsm_continue_flag; /* cleared to exit FSM mainloop */ - uint fsm_iter_num; - struct timer_list stall_timer; - - /* Transfer state/result, use for both id and block request */ - struct request *req; /* request being processed */ - void *data_ptr; /* pointer to I/O buffer */ - int data_count; /* number of buffers remaining */ - int data_result; /* Result of transfer; 0 := success */ - - int id_req_count; /* count of id requests */ - int id_result; - struct completion id_completion; /* used when id req finishes */ - int in_irq; - - /* Details of hardware device */ - resource_size_t physaddr; - void __iomem *baseaddr; - int irq; - int bus_width; /* 0 := 8 bit; 1 := 16 bit */ - struct ace_reg_ops *reg_ops; - int lock_count; - - /* Block device data structures */ - spinlock_t lock; - struct device *dev; - struct request_queue *queue; - struct gendisk *gd; - struct blk_mq_tag_set tag_set; - struct list_head rq_list; - - /* Inserted CF card parameters */ - u16 cf_id[ATA_ID_WORDS]; -}; - -static DEFINE_MUTEX(xsysace_mutex); -static int ace_major; - -/* --------------------------------------------------------------------- - * Low level register access - */ - -struct ace_reg_ops { - u16(*in) (struct ace_device * ace, int reg); - void (*out) (struct ace_device * ace, int reg, u16 val); - void (*datain) (struct ace_device * ace); - void (*dataout) (struct ace_device * ace); -}; - -/* 8 Bit bus width */ -static u16 ace_in_8(struct ace_device *ace, int reg) -{ - void __iomem *r = ace->baseaddr + reg; - return in_8(r) | (in_8(r + 1) << 8); -} - -static void ace_out_8(struct ace_device *ace, int reg, u16 val) -{ - void __iomem *r = ace->baseaddr + reg; - out_8(r, val); - out_8(r + 1, val >> 8); -} - -static void ace_datain_8(struct ace_device *ace) -{ - void __iomem *r = ace->baseaddr + 0x40; - u8 *dst = ace->data_ptr; - int i = ACE_FIFO_SIZE; - while (i--) - *dst++ = in_8(r++); - ace->data_ptr = dst; -} - -static void ace_dataout_8(struct ace_device *ace) -{ - void __iomem *r = ace->baseaddr + 0x40; - u8 *src = ace->data_ptr; - int i = ACE_FIFO_SIZE; - while (i--) - out_8(r++, *src++); - ace->data_ptr = src; -} - -static struct ace_reg_ops ace_reg_8_ops = { - .in = ace_in_8, - .out = ace_out_8, - .datain = ace_datain_8, - .dataout = ace_dataout_8, -}; - -/* 16 bit big endian bus attachment */ -static u16 ace_in_be16(struct ace_device *ace, int reg) -{ - return in_be16(ace->baseaddr + reg); -} - -static void ace_out_be16(struct ace_device *ace, int reg, u16 val) -{ - out_be16(ace->baseaddr + reg, val); -} - -static void ace_datain_be16(struct ace_device *ace) -{ - int i = ACE_FIFO_SIZE / 2; - u16 *dst = ace->data_ptr; - while (i--) - *dst++ = in_le16(ace->baseaddr + 0x40); - ace->data_ptr = dst; -} - -static void ace_dataout_be16(struct ace_device *ace) -{ - int i = ACE_FIFO_SIZE / 2; - u16 *src = ace->data_ptr; - while (i--) - out_le16(ace->baseaddr + 0x40, *src++); - ace->data_ptr = src; -} - -/* 16 bit little endian bus attachment */ -static u16 ace_in_le16(struct ace_device *ace, int reg) -{ - return in_le16(ace->baseaddr + reg); -} - -static void ace_out_le16(struct ace_device *ace, int reg, u16 val) -{ - out_le16(ace->baseaddr + reg, val); -} - -static void ace_datain_le16(struct ace_device *ace) -{ - int i = ACE_FIFO_SIZE / 2; - u16 *dst = ace->data_ptr; - while (i--) - *dst++ = in_be16(ace->baseaddr + 0x40); - ace->data_ptr = dst; -} - -static void ace_dataout_le16(struct ace_device *ace) -{ - int i = ACE_FIFO_SIZE / 2; - u16 *src = ace->data_ptr; - while (i--) - out_be16(ace->baseaddr + 0x40, *src++); - ace->data_ptr = src; -} - -static struct ace_reg_ops ace_reg_be16_ops = { - .in = ace_in_be16, - .out = ace_out_be16, - .datain = ace_datain_be16, - .dataout = ace_dataout_be16, -}; - -static struct ace_reg_ops ace_reg_le16_ops = { - .in = ace_in_le16, - .out = ace_out_le16, - .datain = ace_datain_le16, - .dataout = ace_dataout_le16, -}; - -static inline u16 ace_in(struct ace_device *ace, int reg) -{ - return ace->reg_ops->in(ace, reg); -} - -static inline u32 ace_in32(struct ace_device *ace, int reg) -{ - return ace_in(ace, reg) | (ace_in(ace, reg + 2) << 16); -} - -static inline void ace_out(struct ace_device *ace, int reg, u16 val) -{ - ace->reg_ops->out(ace, reg, val); -} - -static inline void ace_out32(struct ace_device *ace, int reg, u32 val) -{ - ace_out(ace, reg, val); - ace_out(ace, reg + 2, val >> 16); -} - -/* --------------------------------------------------------------------- - * Debug support functions - */ - -#if defined(DEBUG) -static void ace_dump_mem(void *base, int len) -{ - const char *ptr = base; - int i, j; - - for (i = 0; i < len; i += 16) { - printk(KERN_INFO "%.8x:", i); - for (j = 0; j < 16; j++) { - if (!(j % 4)) - printk(" "); - printk("%.2x", ptr[i + j]); - } - printk(" "); - for (j = 0; j < 16; j++) - printk("%c", isprint(ptr[i + j]) ? ptr[i + j] : '.'); - printk("\n"); - } -} -#else -static inline void ace_dump_mem(void *base, int len) -{ -} -#endif - -static void ace_dump_regs(struct ace_device *ace) -{ - dev_info(ace->dev, - " ctrl: %.8x seccnt/cmd: %.4x ver:%.4x\n" - " status:%.8x mpu_lba:%.8x busmode:%4x\n" - " error: %.8x cfg_lba:%.8x fatstat:%.4x\n", - ace_in32(ace, ACE_CTRL), - ace_in(ace, ACE_SECCNTCMD), - ace_in(ace, ACE_VERSION), - ace_in32(ace, ACE_STATUS), - ace_in32(ace, ACE_MPULBA), - ace_in(ace, ACE_BUSMODE), - ace_in32(ace, ACE_ERROR), - ace_in32(ace, ACE_CFGLBA), ace_in(ace, ACE_FATSTAT)); -} - -static void ace_fix_driveid(u16 *id) -{ -#if defined(__BIG_ENDIAN) - int i; - - /* All half words have wrong byte order; swap the bytes */ - for (i = 0; i < ATA_ID_WORDS; i++, id++) - *id = le16_to_cpu(*id); -#endif -} - -/* --------------------------------------------------------------------- - * Finite State Machine (FSM) implementation - */ - -/* FSM tasks; used to direct state transitions */ -#define ACE_TASK_IDLE 0 -#define ACE_TASK_IDENTIFY 1 -#define ACE_TASK_READ 2 -#define ACE_TASK_WRITE 3 -#define ACE_FSM_NUM_TASKS 4 - -/* FSM state definitions */ -#define ACE_FSM_STATE_IDLE 0 -#define ACE_FSM_STATE_REQ_LOCK 1 -#define ACE_FSM_STATE_WAIT_LOCK 2 -#define ACE_FSM_STATE_WAIT_CFREADY 3 -#define ACE_FSM_STATE_IDENTIFY_PREPARE 4 -#define ACE_FSM_STATE_IDENTIFY_TRANSFER 5 -#define ACE_FSM_STATE_IDENTIFY_COMPLETE 6 -#define ACE_FSM_STATE_REQ_PREPARE 7 -#define ACE_FSM_STATE_REQ_TRANSFER 8 -#define ACE_FSM_STATE_REQ_COMPLETE 9 -#define ACE_FSM_STATE_ERROR 10 -#define ACE_FSM_NUM_STATES 11 - -/* Set flag to exit FSM loop and reschedule tasklet */ -static inline void ace_fsm_yieldpoll(struct ace_device *ace) -{ - tasklet_schedule(&ace->fsm_tasklet); - ace->fsm_continue_flag = 0; -} - -static inline void ace_fsm_yield(struct ace_device *ace) -{ - dev_dbg(ace->dev, "%s()\n", __func__); - ace_fsm_yieldpoll(ace); -} - -/* Set flag to exit FSM loop and wait for IRQ to reschedule tasklet */ -static inline void ace_fsm_yieldirq(struct ace_device *ace) -{ - dev_dbg(ace->dev, "ace_fsm_yieldirq()\n"); - - if (ace->irq > 0) - ace->fsm_continue_flag = 0; - else - ace_fsm_yieldpoll(ace); -} - -static bool ace_has_next_request(struct request_queue *q) -{ - struct ace_device *ace = q->queuedata; - - return !list_empty(&ace->rq_list); -} - -/* Get the next read/write request; ending requests that we don't handle */ -static struct request *ace_get_next_request(struct request_queue *q) -{ - struct ace_device *ace = q->queuedata; - struct request *rq; - - rq = list_first_entry_or_null(&ace->rq_list, struct request, queuelist); - if (rq) { - list_del_init(&rq->queuelist); - blk_mq_start_request(rq); - } - - return NULL; -} - -static void ace_fsm_dostate(struct ace_device *ace) -{ - struct request *req; - u32 status; - u16 val; - int count; - -#if defined(DEBUG) - dev_dbg(ace->dev, "fsm_state=%i, id_req_count=%i\n", - ace->fsm_state, ace->id_req_count); -#endif - - /* Verify that there is actually a CF in the slot. If not, then - * bail out back to the idle state and wake up all the waiters */ - status = ace_in32(ace, ACE_STATUS); - if ((status & ACE_STATUS_CFDETECT) == 0) { - ace->fsm_state = ACE_FSM_STATE_IDLE; - ace->media_change = 1; - set_capacity(ace->gd, 0); - dev_info(ace->dev, "No CF in slot\n"); - - /* Drop all in-flight and pending requests */ - if (ace->req) { - blk_mq_end_request(ace->req, BLK_STS_IOERR); - ace->req = NULL; - } - while ((req = ace_get_next_request(ace->queue)) != NULL) - blk_mq_end_request(req, BLK_STS_IOERR); - - /* Drop back to IDLE state and notify waiters */ - ace->fsm_state = ACE_FSM_STATE_IDLE; - ace->id_result = -EIO; - while (ace->id_req_count) { - complete(&ace->id_completion); - ace->id_req_count--; - } - } - - switch (ace->fsm_state) { - case ACE_FSM_STATE_IDLE: - /* See if there is anything to do */ - if (ace->id_req_count || ace_has_next_request(ace->queue)) { - ace->fsm_iter_num++; - ace->fsm_state = ACE_FSM_STATE_REQ_LOCK; - mod_timer(&ace->stall_timer, jiffies + HZ); - if (!timer_pending(&ace->stall_timer)) - add_timer(&ace->stall_timer); - break; - } - del_timer(&ace->stall_timer); - ace->fsm_continue_flag = 0; - break; - - case ACE_FSM_STATE_REQ_LOCK: - if (ace_in(ace, ACE_STATUS) & ACE_STATUS_MPULOCK) { - /* Already have the lock, jump to next state */ - ace->fsm_state = ACE_FSM_STATE_WAIT_CFREADY; - break; - } - - /* Request the lock */ - val = ace_in(ace, ACE_CTRL); - ace_out(ace, ACE_CTRL, val | ACE_CTRL_LOCKREQ); - ace->fsm_state = ACE_FSM_STATE_WAIT_LOCK; - break; - - case ACE_FSM_STATE_WAIT_LOCK: - if (ace_in(ace, ACE_STATUS) & ACE_STATUS_MPULOCK) { - /* got the lock; move to next state */ - ace->fsm_state = ACE_FSM_STATE_WAIT_CFREADY; - break; - } - - /* wait a bit for the lock */ - ace_fsm_yield(ace); - break; - - case ACE_FSM_STATE_WAIT_CFREADY: - status = ace_in32(ace, ACE_STATUS); - if (!(status & ACE_STATUS_RDYFORCFCMD) || - (status & ACE_STATUS_CFBSY)) { - /* CF card isn't ready; it needs to be polled */ - ace_fsm_yield(ace); - break; - } - - /* Device is ready for command; determine what to do next */ - if (ace->id_req_count) - ace->fsm_state = ACE_FSM_STATE_IDENTIFY_PREPARE; - else - ace->fsm_state = ACE_FSM_STATE_REQ_PREPARE; - break; - - case ACE_FSM_STATE_IDENTIFY_PREPARE: - /* Send identify command */ - ace->fsm_task = ACE_TASK_IDENTIFY; - ace->data_ptr = ace->cf_id; - ace->data_count = ACE_BUF_PER_SECTOR; - ace_out(ace, ACE_SECCNTCMD, ACE_SECCNTCMD_IDENTIFY); - - /* As per datasheet, put config controller in reset */ - val = ace_in(ace, ACE_CTRL); - ace_out(ace, ACE_CTRL, val | ACE_CTRL_CFGRESET); - - /* irq handler takes over from this point; wait for the - * transfer to complete */ - ace->fsm_state = ACE_FSM_STATE_IDENTIFY_TRANSFER; - ace_fsm_yieldirq(ace); - break; - - case ACE_FSM_STATE_IDENTIFY_TRANSFER: - /* Check that the sysace is ready to receive data */ - status = ace_in32(ace, ACE_STATUS); - if (status & ACE_STATUS_CFBSY) { - dev_dbg(ace->dev, "CFBSY set; t=%i iter=%i dc=%i\n", - ace->fsm_task, ace->fsm_iter_num, - ace->data_count); - ace_fsm_yield(ace); - break; - } - if (!(status & ACE_STATUS_DATABUFRDY)) { - ace_fsm_yield(ace); - break; - } - - /* Transfer the next buffer */ - ace->reg_ops->datain(ace); - ace->data_count--; - - /* If there are still buffers to be transfers; jump out here */ - if (ace->data_count != 0) { - ace_fsm_yieldirq(ace); - break; - } - - /* transfer finished; kick state machine */ - dev_dbg(ace->dev, "identify finished\n"); - ace->fsm_state = ACE_FSM_STATE_IDENTIFY_COMPLETE; - break; - - case ACE_FSM_STATE_IDENTIFY_COMPLETE: - ace_fix_driveid(ace->cf_id); - ace_dump_mem(ace->cf_id, 512); /* Debug: Dump out disk ID */ - - if (ace->data_result) { - /* Error occurred, disable the disk */ - ace->media_change = 1; - set_capacity(ace->gd, 0); - dev_err(ace->dev, "error fetching CF id (%i)\n", - ace->data_result); - } else { - ace->media_change = 0; - - /* Record disk parameters */ - set_capacity(ace->gd, - ata_id_u32(ace->cf_id, ATA_ID_LBA_CAPACITY)); - dev_info(ace->dev, "capacity: %i sectors\n", - ata_id_u32(ace->cf_id, ATA_ID_LBA_CAPACITY)); - } - - /* We're done, drop to IDLE state and notify waiters */ - ace->fsm_state = ACE_FSM_STATE_IDLE; - ace->id_result = ace->data_result; - while (ace->id_req_count) { - complete(&ace->id_completion); - ace->id_req_count--; - } - break; - - case ACE_FSM_STATE_REQ_PREPARE: - req = ace_get_next_request(ace->queue); - if (!req) { - ace->fsm_state = ACE_FSM_STATE_IDLE; - break; - } - - /* Okay, it's a data request, set it up for transfer */ - dev_dbg(ace->dev, - "request: sec=%llx hcnt=%x, ccnt=%x, dir=%i\n", - (unsigned long long)blk_rq_pos(req), - blk_rq_sectors(req), blk_rq_cur_sectors(req), - rq_data_dir(req)); - - ace->req = req; - ace->data_ptr = bio_data(req->bio); - ace->data_count = blk_rq_cur_sectors(req) * ACE_BUF_PER_SECTOR; - ace_out32(ace, ACE_MPULBA, blk_rq_pos(req) & 0x0FFFFFFF); - - count = blk_rq_sectors(req); - if (rq_data_dir(req)) { - /* Kick off write request */ - dev_dbg(ace->dev, "write data\n"); - ace->fsm_task = ACE_TASK_WRITE; - ace_out(ace, ACE_SECCNTCMD, - count | ACE_SECCNTCMD_WRITE_DATA); - } else { - /* Kick off read request */ - dev_dbg(ace->dev, "read data\n"); - ace->fsm_task = ACE_TASK_READ; - ace_out(ace, ACE_SECCNTCMD, - count | ACE_SECCNTCMD_READ_DATA); - } - - /* As per datasheet, put config controller in reset */ - val = ace_in(ace, ACE_CTRL); - ace_out(ace, ACE_CTRL, val | ACE_CTRL_CFGRESET); - - /* Move to the transfer state. The systemace will raise - * an interrupt once there is something to do - */ - ace->fsm_state = ACE_FSM_STATE_REQ_TRANSFER; - if (ace->fsm_task == ACE_TASK_READ) - ace_fsm_yieldirq(ace); /* wait for data ready */ - break; - - case ACE_FSM_STATE_REQ_TRANSFER: - /* Check that the sysace is ready to receive data */ - status = ace_in32(ace, ACE_STATUS); - if (status & ACE_STATUS_CFBSY) { - dev_dbg(ace->dev, - "CFBSY set; t=%i iter=%i c=%i dc=%i irq=%i\n", - ace->fsm_task, ace->fsm_iter_num, - blk_rq_cur_sectors(ace->req) * 16, - ace->data_count, ace->in_irq); - ace_fsm_yield(ace); /* need to poll CFBSY bit */ - break; - } - if (!(status & ACE_STATUS_DATABUFRDY)) { - dev_dbg(ace->dev, - "DATABUF not set; t=%i iter=%i c=%i dc=%i irq=%i\n", - ace->fsm_task, ace->fsm_iter_num, - blk_rq_cur_sectors(ace->req) * 16, - ace->data_count, ace->in_irq); - ace_fsm_yieldirq(ace); - break; - } - - /* Transfer the next buffer */ - if (ace->fsm_task == ACE_TASK_WRITE) - ace->reg_ops->dataout(ace); - else - ace->reg_ops->datain(ace); - ace->data_count--; - - /* If there are still buffers to be transfers; jump out here */ - if (ace->data_count != 0) { - ace_fsm_yieldirq(ace); - break; - } - - /* bio finished; is there another one? */ - if (blk_update_request(ace->req, BLK_STS_OK, - blk_rq_cur_bytes(ace->req))) { - /* dev_dbg(ace->dev, "next block; h=%u c=%u\n", - * blk_rq_sectors(ace->req), - * blk_rq_cur_sectors(ace->req)); - */ - ace->data_ptr = bio_data(ace->req->bio); - ace->data_count = blk_rq_cur_sectors(ace->req) * 16; - ace_fsm_yieldirq(ace); - break; - } - - ace->fsm_state = ACE_FSM_STATE_REQ_COMPLETE; - break; - - case ACE_FSM_STATE_REQ_COMPLETE: - ace->req = NULL; - - /* Finished request; go to idle state */ - ace->fsm_state = ACE_FSM_STATE_IDLE; - break; - - default: - ace->fsm_state = ACE_FSM_STATE_IDLE; - break; - } -} - -static void ace_fsm_tasklet(unsigned long data) -{ - struct ace_device *ace = (void *)data; - unsigned long flags; - - spin_lock_irqsave(&ace->lock, flags); - - /* Loop over state machine until told to stop */ - ace->fsm_continue_flag = 1; - while (ace->fsm_continue_flag) - ace_fsm_dostate(ace); - - spin_unlock_irqrestore(&ace->lock, flags); -} - -static void ace_stall_timer(struct timer_list *t) -{ - struct ace_device *ace = from_timer(ace, t, stall_timer); - unsigned long flags; - - dev_warn(ace->dev, - "kicking stalled fsm; state=%i task=%i iter=%i dc=%i\n", - ace->fsm_state, ace->fsm_task, ace->fsm_iter_num, - ace->data_count); - spin_lock_irqsave(&ace->lock, flags); - - /* Rearm the stall timer *before* entering FSM (which may then - * delete the timer) */ - mod_timer(&ace->stall_timer, jiffies + HZ); - - /* Loop over state machine until told to stop */ - ace->fsm_continue_flag = 1; - while (ace->fsm_continue_flag) - ace_fsm_dostate(ace); - - spin_unlock_irqrestore(&ace->lock, flags); -} - -/* --------------------------------------------------------------------- - * Interrupt handling routines - */ -static int ace_interrupt_checkstate(struct ace_device *ace) -{ - u32 sreg = ace_in32(ace, ACE_STATUS); - u16 creg = ace_in(ace, ACE_CTRL); - - /* Check for error occurrence */ - if ((sreg & (ACE_STATUS_CFGERROR | ACE_STATUS_CFCERROR)) && - (creg & ACE_CTRL_ERRORIRQ)) { - dev_err(ace->dev, "transfer failure\n"); - ace_dump_regs(ace); - return -EIO; - } - - return 0; -} - -static irqreturn_t ace_interrupt(int irq, void *dev_id) -{ - u16 creg; - struct ace_device *ace = dev_id; - - /* be safe and get the lock */ - spin_lock(&ace->lock); - ace->in_irq = 1; - - /* clear the interrupt */ - creg = ace_in(ace, ACE_CTRL); - ace_out(ace, ACE_CTRL, creg | ACE_CTRL_RESETIRQ); - ace_out(ace, ACE_CTRL, creg); - - /* check for IO failures */ - if (ace_interrupt_checkstate(ace)) - ace->data_result = -EIO; - - if (ace->fsm_task == 0) { - dev_err(ace->dev, - "spurious irq; stat=%.8x ctrl=%.8x cmd=%.4x\n", - ace_in32(ace, ACE_STATUS), ace_in32(ace, ACE_CTRL), - ace_in(ace, ACE_SECCNTCMD)); - dev_err(ace->dev, "fsm_task=%i fsm_state=%i data_count=%i\n", - ace->fsm_task, ace->fsm_state, ace->data_count); - } - - /* Loop over state machine until told to stop */ - ace->fsm_continue_flag = 1; - while (ace->fsm_continue_flag) - ace_fsm_dostate(ace); - - /* done with interrupt; drop the lock */ - ace->in_irq = 0; - spin_unlock(&ace->lock); - - return IRQ_HANDLED; -} - -/* --------------------------------------------------------------------- - * Block ops - */ -static blk_status_t ace_queue_rq(struct blk_mq_hw_ctx *hctx, - const struct blk_mq_queue_data *bd) -{ - struct ace_device *ace = hctx->queue->queuedata; - struct request *req = bd->rq; - - if (blk_rq_is_passthrough(req)) { - blk_mq_start_request(req); - return BLK_STS_IOERR; - } - - spin_lock_irq(&ace->lock); - list_add_tail(&req->queuelist, &ace->rq_list); - spin_unlock_irq(&ace->lock); - - tasklet_schedule(&ace->fsm_tasklet); - return BLK_STS_OK; -} - -static unsigned int ace_check_events(struct gendisk *gd, unsigned int clearing) -{ - struct ace_device *ace = gd->private_data; - dev_dbg(ace->dev, "ace_check_events(): %i\n", ace->media_change); - - return ace->media_change ? DISK_EVENT_MEDIA_CHANGE : 0; -} - -static void ace_media_changed(struct ace_device *ace) -{ - unsigned long flags; - - dev_dbg(ace->dev, "requesting cf id and scheduling tasklet\n"); - - spin_lock_irqsave(&ace->lock, flags); - ace->id_req_count++; - spin_unlock_irqrestore(&ace->lock, flags); - - tasklet_schedule(&ace->fsm_tasklet); - wait_for_completion(&ace->id_completion); - - dev_dbg(ace->dev, "revalidate complete\n"); -} - -static int ace_open(struct block_device *bdev, fmode_t mode) -{ - struct ace_device *ace = bdev->bd_disk->private_data; - unsigned long flags; - - dev_dbg(ace->dev, "ace_open() users=%i\n", ace->users + 1); - - mutex_lock(&xsysace_mutex); - spin_lock_irqsave(&ace->lock, flags); - ace->users++; - spin_unlock_irqrestore(&ace->lock, flags); - - if (bdev_check_media_change(bdev) && ace->media_change) - ace_media_changed(ace); - mutex_unlock(&xsysace_mutex); - - return 0; -} - -static void ace_release(struct gendisk *disk, fmode_t mode) -{ - struct ace_device *ace = disk->private_data; - unsigned long flags; - u16 val; - - dev_dbg(ace->dev, "ace_release() users=%i\n", ace->users - 1); - - mutex_lock(&xsysace_mutex); - spin_lock_irqsave(&ace->lock, flags); - ace->users--; - if (ace->users == 0) { - val = ace_in(ace, ACE_CTRL); - ace_out(ace, ACE_CTRL, val & ~ACE_CTRL_LOCKREQ); - } - spin_unlock_irqrestore(&ace->lock, flags); - mutex_unlock(&xsysace_mutex); -} - -static int ace_getgeo(struct block_device *bdev, struct hd_geometry *geo) -{ - struct ace_device *ace = bdev->bd_disk->private_data; - u16 *cf_id = ace->cf_id; - - dev_dbg(ace->dev, "ace_getgeo()\n"); - - geo->heads = cf_id[ATA_ID_HEADS]; - geo->sectors = cf_id[ATA_ID_SECTORS]; - geo->cylinders = cf_id[ATA_ID_CYLS]; - - return 0; -} - -static const struct block_device_operations ace_fops = { - .owner = THIS_MODULE, - .open = ace_open, - .release = ace_release, - .check_events = ace_check_events, - .getgeo = ace_getgeo, -}; - -static const struct blk_mq_ops ace_mq_ops = { - .queue_rq = ace_queue_rq, -}; - -/* -------------------------------------------------------------------- - * SystemACE device setup/teardown code - */ -static int ace_setup(struct ace_device *ace) -{ - u16 version; - u16 val; - int rc; - - dev_dbg(ace->dev, "ace_setup(ace=0x%p)\n", ace); - dev_dbg(ace->dev, "physaddr=0x%llx irq=%i\n", - (unsigned long long)ace->physaddr, ace->irq); - - spin_lock_init(&ace->lock); - init_completion(&ace->id_completion); - INIT_LIST_HEAD(&ace->rq_list); - - /* - * Map the device - */ - ace->baseaddr = ioremap(ace->physaddr, 0x80); - if (!ace->baseaddr) - goto err_ioremap; - - /* - * Initialize the state machine tasklet and stall timer - */ - tasklet_init(&ace->fsm_tasklet, ace_fsm_tasklet, (unsigned long)ace); - timer_setup(&ace->stall_timer, ace_stall_timer, 0); - - /* - * Initialize the request queue - */ - ace->queue = blk_mq_init_sq_queue(&ace->tag_set, &ace_mq_ops, 2, - BLK_MQ_F_SHOULD_MERGE); - if (IS_ERR(ace->queue)) { - rc = PTR_ERR(ace->queue); - ace->queue = NULL; - goto err_blk_initq; - } - ace->queue->queuedata = ace; - - blk_queue_logical_block_size(ace->queue, 512); - blk_queue_bounce_limit(ace->queue, BLK_BOUNCE_HIGH); - - /* - * Allocate and initialize GD structure - */ - ace->gd = alloc_disk(ACE_NUM_MINORS); - if (!ace->gd) - goto err_alloc_disk; - - ace->gd->major = ace_major; - ace->gd->first_minor = ace->id * ACE_NUM_MINORS; - ace->gd->fops = &ace_fops; - ace->gd->events = DISK_EVENT_MEDIA_CHANGE; - ace->gd->queue = ace->queue; - ace->gd->private_data = ace; - snprintf(ace->gd->disk_name, 32, "xs%c", ace->id + 'a'); - - /* set bus width */ - if (ace->bus_width == ACE_BUS_WIDTH_16) { - /* 0x0101 should work regardless of endianess */ - ace_out_le16(ace, ACE_BUSMODE, 0x0101); - - /* read it back to determine endianess */ - if (ace_in_le16(ace, ACE_BUSMODE) == 0x0001) - ace->reg_ops = &ace_reg_le16_ops; - else - ace->reg_ops = &ace_reg_be16_ops; - } else { - ace_out_8(ace, ACE_BUSMODE, 0x00); - ace->reg_ops = &ace_reg_8_ops; - } - - /* Make sure version register is sane */ - version = ace_in(ace, ACE_VERSION); - if ((version == 0) || (version == 0xFFFF)) - goto err_read; - - /* Put sysace in a sane state by clearing most control reg bits */ - ace_out(ace, ACE_CTRL, ACE_CTRL_FORCECFGMODE | - ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ); - - /* Now we can hook up the irq handler */ - if (ace->irq > 0) { - rc = request_irq(ace->irq, ace_interrupt, 0, "systemace", ace); - if (rc) { - /* Failure - fall back to polled mode */ - dev_err(ace->dev, "request_irq failed\n"); - ace->irq = rc; - } - } - - /* Enable interrupts */ - val = ace_in(ace, ACE_CTRL); - val |= ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ; - ace_out(ace, ACE_CTRL, val); - - /* Print the identification */ - dev_info(ace->dev, "Xilinx SystemACE revision %i.%i.%i\n", - (version >> 12) & 0xf, (version >> 8) & 0x0f, version & 0xff); - dev_dbg(ace->dev, "physaddr 0x%llx, mapped to 0x%p, irq=%i\n", - (unsigned long long) ace->physaddr, ace->baseaddr, ace->irq); - - ace->media_change = 1; - ace_media_changed(ace); - - /* Make the sysace device 'live' */ - add_disk(ace->gd); - - return 0; - -err_read: - /* prevent double queue cleanup */ - ace->gd->queue = NULL; - put_disk(ace->gd); -err_alloc_disk: - blk_cleanup_queue(ace->queue); - blk_mq_free_tag_set(&ace->tag_set); -err_blk_initq: - iounmap(ace->baseaddr); -err_ioremap: - dev_info(ace->dev, "xsysace: error initializing device at 0x%llx\n", - (unsigned long long) ace->physaddr); - return -ENOMEM; -} - -static void ace_teardown(struct ace_device *ace) -{ - if (ace->gd) { - del_gendisk(ace->gd); - put_disk(ace->gd); - } - - if (ace->queue) { - blk_cleanup_queue(ace->queue); - blk_mq_free_tag_set(&ace->tag_set); - } - - tasklet_kill(&ace->fsm_tasklet); - - if (ace->irq > 0) - free_irq(ace->irq, ace); - - iounmap(ace->baseaddr); -} - -static int ace_alloc(struct device *dev, int id, resource_size_t physaddr, - int irq, int bus_width) -{ - struct ace_device *ace; - int rc; - dev_dbg(dev, "ace_alloc(%p)\n", dev); - - /* Allocate and initialize the ace device structure */ - ace = kzalloc(sizeof(struct ace_device), GFP_KERNEL); - if (!ace) { - rc = -ENOMEM; - goto err_alloc; - } - - ace->dev = dev; - ace->id = id; - ace->physaddr = physaddr; - ace->irq = irq; - ace->bus_width = bus_width; - - /* Call the setup code */ - rc = ace_setup(ace); - if (rc) - goto err_setup; - - dev_set_drvdata(dev, ace); - return 0; - -err_setup: - dev_set_drvdata(dev, NULL); - kfree(ace); -err_alloc: - dev_err(dev, "could not initialize device, err=%i\n", rc); - return rc; -} - -static void ace_free(struct device *dev) -{ - struct ace_device *ace = dev_get_drvdata(dev); - dev_dbg(dev, "ace_free(%p)\n", dev); - - if (ace) { - ace_teardown(ace); - dev_set_drvdata(dev, NULL); - kfree(ace); - } -} - -/* --------------------------------------------------------------------- - * Platform Bus Support - */ - -static int ace_probe(struct platform_device *dev) -{ - int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard coded */ - resource_size_t physaddr; - struct resource *res; - u32 id = dev->id; - int irq; - int i; - - dev_dbg(&dev->dev, "ace_probe(%p)\n", dev); - - /* device id and bus width */ - if (of_property_read_u32(dev->dev.of_node, "port-number", &id)) - id = 0; - if (of_find_property(dev->dev.of_node, "8-bit", NULL)) - bus_width = ACE_BUS_WIDTH_8; - - res = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!res) - return -EINVAL; - - physaddr = res->start; - if (!physaddr) - return -ENODEV; - - irq = platform_get_irq_optional(dev, 0); - - /* Call the bus-independent setup code */ - return ace_alloc(&dev->dev, id, physaddr, irq, bus_width); -} - -/* - * Platform bus remove() method - */ -static int ace_remove(struct platform_device *dev) -{ - ace_free(&dev->dev); - return 0; -} - -#if defined(CONFIG_OF) -/* Match table for of_platform binding */ -static const struct of_device_id ace_of_match[] = { - { .compatible = "xlnx,opb-sysace-1.00.b", }, - { .compatible = "xlnx,opb-sysace-1.00.c", }, - { .compatible = "xlnx,xps-sysace-1.00.a", }, - { .compatible = "xlnx,sysace", }, - {}, -}; -MODULE_DEVICE_TABLE(of, ace_of_match); -#else /* CONFIG_OF */ -#define ace_of_match NULL -#endif /* CONFIG_OF */ - -static struct platform_driver ace_platform_driver = { - .probe = ace_probe, - .remove = ace_remove, - .driver = { - .name = "xsysace", - .of_match_table = ace_of_match, - }, -}; - -/* --------------------------------------------------------------------- - * Module init/exit routines - */ -static int __init ace_init(void) -{ - int rc; - - ace_major = register_blkdev(ace_major, "xsysace"); - if (ace_major <= 0) { - rc = -ENOMEM; - goto err_blk; - } - - rc = platform_driver_register(&ace_platform_driver); - if (rc) - goto err_plat; - - pr_info("Xilinx SystemACE device driver, major=%i\n", ace_major); - return 0; - -err_plat: - unregister_blkdev(ace_major, "xsysace"); -err_blk: - printk(KERN_ERR "xsysace: registration failed; err=%i\n", rc); - return rc; -} -module_init(ace_init); - -static void __exit ace_exit(void) -{ - pr_debug("Unregistering Xilinx SystemACE driver\n"); - platform_driver_unregister(&ace_platform_driver); - unregister_blkdev(ace_major, "xsysace"); -} -module_exit(ace_exit); -- cgit v1.2.3