From 5483c10e03c6e37b81b79bf88749bcfbe474a639 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 22 Oct 2014 17:43:16 +0200 Subject: serial: at91: Use dmaengine_slave_config API We are removing the dmaengine_device_control API, that shouldn't even have been exposed in the first place. Change the callers to use the proper API. Signed-off-by: Maxime Ripard Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/atmel_serial.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 9eb624a22431..b9987109b2da 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -862,9 +862,8 @@ static int atmel_prepare_tx_dma(struct uart_port *port) config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; config.dst_addr = port->mapbase + ATMEL_US_THR; - ret = dmaengine_device_control(atmel_port->chan_tx, - DMA_SLAVE_CONFIG, - (unsigned long)&config); + ret = dmaengine_slave_config(atmel_port->chan_tx, + &config); if (ret) { dev_err(port->dev, "DMA tx slave configuration failed\n"); goto chan_err; @@ -1042,9 +1041,8 @@ static int atmel_prepare_rx_dma(struct uart_port *port) config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; config.src_addr = port->mapbase + ATMEL_US_RHR; - ret = dmaengine_device_control(atmel_port->chan_rx, - DMA_SLAVE_CONFIG, - (unsigned long)&config); + ret = dmaengine_slave_config(atmel_port->chan_rx, + &config); if (ret) { dev_err(port->dev, "DMA rx slave configuration failed\n"); goto chan_err; -- cgit v1.2.3