From 62e345ae5b6ed977b02c24d1eaeaece062f9fb17 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 30 Nov 2015 15:24:29 -0600 Subject: usb: dwc3: gadget: don't prestart interrupt endpoints Because interrupt endpoints usually transmit such small amounts of data, it seems pointless to prestart transfers and try to get speed improvements. This patch also sorts out a problem with CDC ECM function where its notification endpoint gets stuck in busy state and we continuously issue Update Transfer commands. Fixes: 8a1a9c9e4503 ("usb: dwc3: gadget: start transfer on XFER_COMPLETE") Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index e24a01cc98df..a58376fd65fe 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1078,6 +1078,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) * little bit faster. */ if (!usb_endpoint_xfer_isoc(dep->endpoint.desc) && + !usb_endpoint_xfer_int(dep->endpoint.desc) && !(dep->flags & DWC3_EP_BUSY)) { ret = __dwc3_gadget_kick_transfer(dep, 0, true); goto out; -- cgit v1.2.3 From 928c75fbeb6b62edbdff7c52ee1e9a3591faee4f Mon Sep 17 00:00:00 2001 From: LABBE Corentin Date: Tue, 24 Nov 2015 15:34:09 +0100 Subject: usb: phy: msm: fix a possible NULL dereference of_match_device could return NULL, and so cause a NULL pointer dereference later. Even if the probability of this case is very low, fixing it made static analyzers happy. Solving this with of_device_get_match_data made also code simplier. Reported-by: coverity (CID 1324133) Signed-off-by: LABBE Corentin Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-msm-usb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 80eb991c2506..0d19a6d61a71 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -1506,7 +1506,6 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) { struct msm_otg_platform_data *pdata; struct extcon_dev *ext_id, *ext_vbus; - const struct of_device_id *id; struct device_node *node = pdev->dev.of_node; struct property *prop; int len, ret, words; @@ -1518,8 +1517,9 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) motg->pdata = pdata; - id = of_match_device(msm_otg_dt_match, &pdev->dev); - pdata->phy_type = (enum msm_usb_phy_type) id->data; + pdata->phy_type = (enum msm_usb_phy_type)of_device_get_match_data(&pdev->dev); + if (!pdata->phy_type) + return 1; motg->link_rst = devm_reset_control_get(&pdev->dev, "link"); if (IS_ERR(motg->link_rst)) -- cgit v1.2.3 From 4d05591094979d24a0e728f246589963c40102e9 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 7 Dec 2015 21:23:15 -0800 Subject: usb: musb: core: Fix pm runtime for deferred probe If musb_init_controller fails at musb_platform_init, we have already called pm_runtime_irq_safe for musb and that causes the pm runtime count to be enabled for parent before the parent has completed initialization. This causes pm to stop working as on unload nothing gets idled. This issue can be reproduced at least with: # modprobe omap2430 HS USB OTG: no transceiver configured musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517 # modprobe phy-twl4030-usb # rmmod omap2430 And after the steps above omap2430 will block deeper idle states on omap3. To fix this, let's not enable pm runtime until we need to and the parent has been initialized. Note that this does not fix the issue of PM being broken for musb during runtime. Signed-off-by: Tony Lindgren Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 18cfc0a361cb..3c07ffd392cf 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2017,7 +2017,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) /* We need musb_read/write functions initialized for PM */ pm_runtime_use_autosuspend(musb->controller); pm_runtime_set_autosuspend_delay(musb->controller, 200); - pm_runtime_irq_safe(musb->controller); pm_runtime_enable(musb->controller); /* The musb_platform_init() call: @@ -2218,6 +2217,12 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) pm_runtime_put(musb->controller); + /* + * For why this is currently needed, see commit 3e43a0725637 + * ("usb: musb: core: add pm_runtime_irq_safe()") + */ + pm_runtime_irq_safe(musb->controller); + return 0; fail5: -- cgit v1.2.3 From 27681abc429554622a188a3a0b213fb1c20040f7 Mon Sep 17 00:00:00 2001 From: Mian Yousaf Kaukab Date: Sat, 28 Nov 2015 18:35:44 +0100 Subject: usb: gadget: uvc: fix permissions of configfs attributes 76e0da3 "usb-gadget/uvc: use per-attribute show and store methods" removed write permission for writeable attributes. Correct attribute permissions. Fixes: 76e0da3 "usb-gadget/uvc: use per-attribute show and store methods" Reviewed-by: Christoph Hellwig Reviewed-by: Laurent Pinchart Signed-off-by: Mian Yousaf Kaukab Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/uvc_configfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/function/uvc_configfs.c b/drivers/usb/gadget/function/uvc_configfs.c index 289ebca316d3..ad8c9b05572d 100644 --- a/drivers/usb/gadget/function/uvc_configfs.c +++ b/drivers/usb/gadget/function/uvc_configfs.c @@ -20,7 +20,7 @@ #define UVC_ATTR(prefix, cname, aname) \ static struct configfs_attribute prefix##attr_##cname = { \ .ca_name = __stringify(aname), \ - .ca_mode = S_IRUGO, \ + .ca_mode = S_IRUGO | S_IWUGO, \ .ca_owner = THIS_MODULE, \ .show = prefix##cname##_show, \ .store = prefix##cname##_store, \ -- cgit v1.2.3 From 7d32cdef535622c0aea39807989f62cdddea207e Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Mon, 23 Nov 2015 21:50:11 +0200 Subject: usb: musb: fail with error when no DMA controller set Fail with error when no DMA controller is set. Signed-off-by: Aaro Koskinen Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 3c07ffd392cf..ee9ff7028b92 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2094,6 +2094,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) #ifndef CONFIG_MUSB_PIO_ONLY if (!musb->ops->dma_init || !musb->ops->dma_exit) { dev_err(dev, "DMA controller not set\n"); + status = -ENODEV; goto fail2; } musb_dma_controller_create = musb->ops->dma_init; -- cgit v1.2.3