From bc86cf7af2ebda88056538e8edff852ee627f76a Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 9 Oct 2012 23:26:06 -0700 Subject: mtd: nand: fix Samsung SLC NAND identification regression A combination of the following two commits caused a regression in 3.7-rc1 when identifying some Samsung NAND, so that some previously working NAND were no longer detected properly: commit e3b88bd604283ef83ae6e8f53622d5b1ffe9d43a mtd: nand: add generic READ ID length calculation functions commit e2d3a35ee427aaba99b6c68a56609ce276c51270 mtd: nand: detect Samsung K9GBG08U0A, K9GAG08U0F ID Particularly, a regression was seen on Samsung K9F2G08U0B, with the following full 8-byte READ ID string: ec da 10 95 44 00 ec da The basic problem is that Samsung manufactures both SLC and MLC NAND that use a non-standard decoding table for deriving information from their IDs. I have heuristically determined that all the chips that use the new table have ID strings which wrap around after the 6th byte. Unfortunately, I overlooked the fact that some older Samsung SLC (which use a different decoding table) have "5 byte ID strings" which also wrap around after the 6th byte. This patch re-introduces a distinction between these old and new Samsung NAND by checking that the 6th byte is non-zero, allowing both old and new Samsung NAND to be detected properly. Signed-off-by: Brian Norris Tested-by: Brian Norris Reported-by: Marek Vasut Tested-by: Marek Vasut Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index ec6841d8e956..d5ece6ea6f98 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2983,13 +2983,14 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip, /* * Field definitions are in the following datasheets: * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32) - * New style (6 byte ID): Samsung K9GAG08U0F (p.44) + * New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44) * Hynix MLC (6 byte ID): Hynix H27UBG8T2B (p.22) * - * Check for ID length, cell type, and Hynix/Samsung ID to decide what - * to do. + * Check for ID length, non-zero 6th byte, cell type, and Hynix/Samsung + * ID to decide what to do. */ - if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG) { + if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG && + id_data[5] != 0x00) { /* Calc pagesize */ mtd->writesize = 2048 << (extid & 0x03); extid >>= 2; -- cgit v1.2.3 From 5a6ea4af0907f995dc06df21a9c9ef764c7cd3bc Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 25 Sep 2012 15:27:13 +0530 Subject: mtd: ofpart: Fix incorrect NULL check in parse_ofoldpart_partitions() The pointer returned by kzalloc should be tested for NULL to avoid potential NULL pointer dereference later. Incorrect pointer was being tested for NULL. Bug introduced by commit fbcf62a3 (mtd: physmap_of: move parse_obsolete_partitions to become separate parser). This patch fixes this bug. Cc: Dmitry Eremin-Solenikov Cc: Artem Bityutskiy Cc: stable@kernel.org Signed-off-by: Sachin Kamat Signed-off-by: David Woodhouse --- drivers/mtd/ofpart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c index 64be8f0848b0..d9127e2ed808 100644 --- a/drivers/mtd/ofpart.c +++ b/drivers/mtd/ofpart.c @@ -121,7 +121,7 @@ static int parse_ofoldpart_partitions(struct mtd_info *master, nr_parts = plen / sizeof(part[0]); *pparts = kzalloc(nr_parts * sizeof(*(*pparts)), GFP_KERNEL); - if (!pparts) + if (!*pparts) return -ENOMEM; names = of_get_property(dp, "partition-names", &plen); -- cgit v1.2.3 From d79550a7bc35c16476ebdc27c78378d8093390ec Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 11 Oct 2012 09:56:35 +0300 Subject: gpio-timberdale: fix a potential wrapping issue ->last_ier is an unsigned long but the high bits can't be used int the original code because the shift wraps. Cc: stable@kernel.org Signed-off-by: Dan Carpenter Signed-off-by: Linus Walleij --- drivers/gpio/gpio-timberdale.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-timberdale.c b/drivers/gpio/gpio-timberdale.c index 031c6adf5b65..1a3e2b9b4772 100644 --- a/drivers/gpio/gpio-timberdale.c +++ b/drivers/gpio/gpio-timberdale.c @@ -116,7 +116,7 @@ static void timbgpio_irq_disable(struct irq_data *d) unsigned long flags; spin_lock_irqsave(&tgpio->lock, flags); - tgpio->last_ier &= ~(1 << offset); + tgpio->last_ier &= ~(1UL << offset); iowrite32(tgpio->last_ier, tgpio->membase + TGPIO_IER); spin_unlock_irqrestore(&tgpio->lock, flags); } @@ -128,7 +128,7 @@ static void timbgpio_irq_enable(struct irq_data *d) unsigned long flags; spin_lock_irqsave(&tgpio->lock, flags); - tgpio->last_ier |= 1 << offset; + tgpio->last_ier |= 1UL << offset; iowrite32(tgpio->last_ier, tgpio->membase + TGPIO_IER); spin_unlock_irqrestore(&tgpio->lock, flags); } -- cgit v1.2.3 From a48221a26e4914b7e2d8a1749b6115212bac8bee Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Tue, 16 Oct 2012 15:24:01 +0200 Subject: gpio-74x164: Fix buffer allocation size The new registers handling in the gpio-74x164 driver allocates chip->registers * 8 bytes where only one byte per register is necessary. This patch fixes this. Signed-off-by: Roland Stigge Signed-off-by: Linus Walleij --- drivers/gpio/gpio-74x164.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-74x164.c b/drivers/gpio/gpio-74x164.c index ed3e55161bdc..f05e54258ffb 100644 --- a/drivers/gpio/gpio-74x164.c +++ b/drivers/gpio/gpio-74x164.c @@ -153,7 +153,7 @@ static int __devinit gen_74x164_probe(struct spi_device *spi) } chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers; - chip->buffer = devm_kzalloc(&spi->dev, chip->gpio_chip.ngpio, GFP_KERNEL); + chip->buffer = devm_kzalloc(&spi->dev, chip->registers, GFP_KERNEL); if (!chip->buffer) { ret = -ENOMEM; goto exit_destroy; -- cgit v1.2.3 From 0be1fecd7ee61b5a6d2b2e94b052b8a070b946ef Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 22 Oct 2012 10:44:55 +1100 Subject: md faulty: use disk_stack_limits() in: fe86cdce block: do not artificially constrain max_sectors for stacking drivers max_sectors defaults to UINT_MAX. md faulty wasn't using disk_stack_limits(), so inherited this large value as well. This triggered a bug in XFS when stressed over md_faulty, when a very large bio_alloc() failed. That was on an older kernel, and I can't reproduce exactly the same thing upstream, but I think the fix is appropriate in any case. Thanks to Mike Snitzer for pointing out the problem. Signed-off-by: Eric Sandeen Signed-off-by: NeilBrown --- drivers/md/faulty.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/faulty.c b/drivers/md/faulty.c index 45135f69509c..5e7dc772f5de 100644 --- a/drivers/md/faulty.c +++ b/drivers/md/faulty.c @@ -315,8 +315,11 @@ static int run(struct mddev *mddev) } conf->nfaults = 0; - rdev_for_each(rdev, mddev) + rdev_for_each(rdev, mddev) { conf->rdev = rdev; + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); + } md_set_array_sectors(mddev, faulty_size(mddev, 0, 0)); mddev->private = conf; -- cgit v1.2.3 From a9193983f4f292a82a00c72971c17ec0ee8c6c15 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Mon, 22 Oct 2012 12:55:55 +0200 Subject: drm/i915: fix overlay on i830M MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The overlay on the i830M has a peculiar failure mode: It works the first time around after boot-up, but consistenly hangs the second time it's used. Chris Wilson has dug out a nice errata: "1.5.12 Clock Gating Disable for Display Register Address Offset: 06200h–06203h "Bit 3 Ovrunit Clock Gating Disable. 0 = Clock gating controlled by unit enabling logic 1 = Disable clock gating function DevALM Errata ALM049: Overlay Clock Gating Must be Disabled: Overlay & L2 Cache clock gating must be disabled in order to prevent device hangs when turning off overlay.SW must turn off Ovrunit clock gating (6200h) and L2 Cache clock gating (C8h)." Now I've nowhere found that 0xc8 register and hence couldn't apply the l2 cache workaround. But I've remembered that part of the magic that the OVERLAY_ON/OFF commands are supposed to do is to rearrange cache allocations so that the overlay scaler has some scratch space. And while pondering how that could explain the hang the 2nd time we enable the overlay, I've remembered that the old ums overlay code did _not_ issue the OVERLAY_OFF cmd. And indeed, disabling the OFF cmd results in the overlay working flawlessly, so I guess we can workaround the lack of the above workaround by simply never disabling the overlay engine once it's enabled. Note that we have the first part of the above w/a already implemented in i830_init_clock_gating - leave that as-is to avoid surprises. v2: Add a comment in the code. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47827 Cc: stable@vger.kernel.org Tested-by: Rhys Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_overlay.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c index 495625914e4a..d7bc817f51a0 100644 --- a/drivers/gpu/drm/i915/intel_overlay.c +++ b/drivers/gpu/drm/i915/intel_overlay.c @@ -341,9 +341,17 @@ static int intel_overlay_off(struct intel_overlay *overlay) intel_ring_emit(ring, flip_addr); intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP); /* turn overlay off */ - intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_OFF); - intel_ring_emit(ring, flip_addr); - intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP); + if (IS_I830(dev)) { + /* Workaround: Don't disable the overlay fully, since otherwise + * it dies on the next OVERLAY_ON cmd. */ + intel_ring_emit(ring, MI_NOOP); + intel_ring_emit(ring, MI_NOOP); + intel_ring_emit(ring, MI_NOOP); + } else { + intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_OFF); + intel_ring_emit(ring, flip_addr); + intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP); + } intel_ring_advance(ring); return intel_overlay_do_wait_request(overlay, intel_overlay_off_tail); -- cgit v1.2.3 From 7f6658ef35a470cd641ea35a1da409c4bc5bae1e Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 21 Oct 2012 23:26:29 +0200 Subject: drm/i915: VGA needs to be on pipe A on i830M The bit doesn't stick, and the output is always cloned from pipe A, even when it's supposed to scan out from pipe B. Shuts up annoying warnings from the modeset-rework, too. I've noticed that with this patch we know get and unknown connection state since the code can't find a suitable pipe for load detection. But that beats the previous state of affairs, where it tried to use pipe B, actually used pipe A and concluded that something is connected (although it's the LVDS on pipe A and nothing on the VGA connector on pipe B). I've tried to make load detect work by remapping the pipe->planes stuff, so that crtc 0 will use pipe B and hence we still have something left for load-detect on pipe A. But alas, that upset the hw a bit. So there's still some things to figure out, but this here will at least paper over some of the problems. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51265 Acked-by: Chris Wilson [danvet: extend the commit message a bit with recent observations.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_crt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index f78061af7045..b726b478a4f5 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -729,7 +729,7 @@ void intel_crt_init(struct drm_device *dev) crt->base.type = INTEL_OUTPUT_ANALOG; crt->base.cloneable = true; - if (IS_HASWELL(dev)) + if (IS_HASWELL(dev) || IS_I830(dev)) crt->base.crtc_mask = (1 << 0); else crt->base.crtc_mask = (1 << 0) | (1 << 1) | (1 << 2); -- cgit v1.2.3 From b8977285ecb0033b0bd9a99d4355f9c0bc8708f1 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Tue, 23 Oct 2012 14:01:51 -0600 Subject: drivers/block: remove CONFIG_EXPERIMENTAL This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. CC: Greg Kroah-Hartman CC: Asai Thambi S P CC: Pete Zaitcev CC: Cong Wang CC: Jens Axboe Signed-off-by: Kees Cook Signed-off-by: Jens Axboe --- drivers/block/Kconfig | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index f529407db93f..6983a65c8df3 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -166,8 +166,8 @@ config BLK_DEV_DAC960 module will be called DAC960. config BLK_DEV_UMEM - tristate "Micro Memory MM5415 Battery Backed RAM support (EXPERIMENTAL)" - depends on PCI && EXPERIMENTAL + tristate "Micro Memory MM5415 Battery Backed RAM support" + depends on PCI ---help--- Saying Y here will include support for the MM5415 family of battery backed (Non-volatile) RAM cards. @@ -430,8 +430,8 @@ config CDROM_PKTCDVD_BUFFERS a disc is opened for writing. config CDROM_PKTCDVD_WCACHE - bool "Enable write caching (EXPERIMENTAL)" - depends on CDROM_PKTCDVD && EXPERIMENTAL + bool "Enable write caching" + depends on CDROM_PKTCDVD help If enabled, write caching will be set for the CD-R/W device. For now this option is dangerous unless the CD-RW media is known good, as we @@ -508,8 +508,8 @@ config XEN_BLKDEV_BACKEND config VIRTIO_BLK - tristate "Virtio block driver (EXPERIMENTAL)" - depends on EXPERIMENTAL && VIRTIO + tristate "Virtio block driver" + depends on VIRTIO ---help--- This is the virtual block driver for virtio. It can be used with lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. @@ -528,7 +528,7 @@ config BLK_DEV_HD config BLK_DEV_RBD tristate "Rados block device (RBD)" - depends on INET && EXPERIMENTAL && BLOCK + depends on INET && BLOCK select CEPH_LIB select LIBCRC32C select CRYPTO_AES -- cgit v1.2.3 From c57d75c099e55500b620f50a207e61b9e20ecd29 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 23 Oct 2012 10:17:05 +0200 Subject: gpio: mvebu: correctly set the value in direction_output() The ->direction_output() operation of gpio_chip is supposed to set the direction to output but also to set the GPIO to an initial value. Unfortunately, this last part was not done until now, causing for example the LEDs to not be properly set to their default initial value. This patch fixes this by calling the mvebu_gpio_set() function from mvebu_gpio_direction_output() before configuring the GPIO as an output GPIO. Signed-off-by: Thomas Petazzoni Signed-off-by: Linus Walleij --- drivers/gpio/gpio-mvebu.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index 902af437eaf2..1bb43e3f9a61 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -244,6 +244,8 @@ static int mvebu_gpio_direction_output(struct gpio_chip *chip, unsigned pin, if (ret) return ret; + mvebu_gpio_set(chip, pin, value); + spin_lock_irqsave(&mvchip->lock, flags); u = readl_relaxed(mvebu_gpioreg_io_conf(mvchip)); u &= ~(1 << pin); -- cgit v1.2.3 From b6e0e543f75729f207b9c72b0162ae61170635b2 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 21 Oct 2012 12:52:39 +0200 Subject: drm/i915: clear the entire sdvo infoframe buffer MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Like in the case of native hdmi, which is fixed already in commit adf00b26d18e1b3570451296e03bcb20e4798cdd Author: Paulo Zanoni Date: Tue Sep 25 13:23:34 2012 -0300 drm/i915: make sure we write all the DIP data bytes we need to clear the entire sdvo buffer to avoid upsetting the display. Since infoframe buffer writing is now a bit more elaborate, extract it into it's own function. This will be useful if we ever get around to properly update the ELD for sdvo. Also #define proper names for the two buffer indexes with fixed usage. v2: Cite the right commit above, spotted by Paulo Zanoni. v3: I'm too stupid to paste the right commit. v4: Ben Hutchings noticed that I've failed to handle an underflow in my loop logic, breaking it for i >= length + 8. Since I've just lost C programmer license, use his solution. Also, make the frustrated 0-base buffer size a notch more clear. Reported-and-tested-by: Jürg Billeter Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=25732 Cc: stable@vger.kernel.org Cc: Paulo Zanoni Cc: Ben Hutchings Reviewed-by: Rodrigo Vivi Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sdvo.c | 62 +++++++++++++++++++++++----------- drivers/gpu/drm/i915/intel_sdvo_regs.h | 2 ++ 2 files changed, 44 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index c01d97db0061..79d308da29ff 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -894,6 +894,45 @@ static void intel_sdvo_dump_hdmi_buf(struct intel_sdvo *intel_sdvo) } #endif +static bool intel_sdvo_write_infoframe(struct intel_sdvo *intel_sdvo, + unsigned if_index, uint8_t tx_rate, + uint8_t *data, unsigned length) +{ + uint8_t set_buf_index[2] = { if_index, 0 }; + uint8_t hbuf_size, tmp[8]; + int i; + + if (!intel_sdvo_set_value(intel_sdvo, + SDVO_CMD_SET_HBUF_INDEX, + set_buf_index, 2)) + return false; + + if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HBUF_INFO, + &hbuf_size, 1)) + return false; + + /* Buffer size is 0 based, hooray! */ + hbuf_size++; + + DRM_DEBUG_KMS("writing sdvo hbuf: %i, hbuf_size %i, hbuf_size: %i\n", + if_index, length, hbuf_size); + + for (i = 0; i < hbuf_size; i += 8) { + memset(tmp, 0, 8); + if (i < length) + memcpy(tmp, data + i, min_t(unsigned, 8, length - i)); + + if (!intel_sdvo_set_value(intel_sdvo, + SDVO_CMD_SET_HBUF_DATA, + tmp, 8)) + return false; + } + + return intel_sdvo_set_value(intel_sdvo, + SDVO_CMD_SET_HBUF_TXRATE, + &tx_rate, 1); +} + static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo) { struct dip_infoframe avi_if = { @@ -901,11 +940,7 @@ static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo) .ver = DIP_VERSION_AVI, .len = DIP_LEN_AVI, }; - uint8_t tx_rate = SDVO_HBUF_TX_VSYNC; - uint8_t set_buf_index[2] = { 1, 0 }; uint8_t sdvo_data[4 + sizeof(avi_if.body.avi)]; - uint64_t *data = (uint64_t *)sdvo_data; - unsigned i; intel_dip_infoframe_csum(&avi_if); @@ -915,22 +950,9 @@ static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo) sdvo_data[3] = avi_if.checksum; memcpy(&sdvo_data[4], &avi_if.body, sizeof(avi_if.body.avi)); - if (!intel_sdvo_set_value(intel_sdvo, - SDVO_CMD_SET_HBUF_INDEX, - set_buf_index, 2)) - return false; - - for (i = 0; i < sizeof(sdvo_data); i += 8) { - if (!intel_sdvo_set_value(intel_sdvo, - SDVO_CMD_SET_HBUF_DATA, - data, 8)) - return false; - data++; - } - - return intel_sdvo_set_value(intel_sdvo, - SDVO_CMD_SET_HBUF_TXRATE, - &tx_rate, 1); + return intel_sdvo_write_infoframe(intel_sdvo, SDVO_HBUF_INDEX_AVI_IF, + SDVO_HBUF_TX_VSYNC, + sdvo_data, sizeof(sdvo_data)); } static bool intel_sdvo_set_tv_format(struct intel_sdvo *intel_sdvo) diff --git a/drivers/gpu/drm/i915/intel_sdvo_regs.h b/drivers/gpu/drm/i915/intel_sdvo_regs.h index 9d030142ee43..770bdd6ecd9f 100644 --- a/drivers/gpu/drm/i915/intel_sdvo_regs.h +++ b/drivers/gpu/drm/i915/intel_sdvo_regs.h @@ -708,6 +708,8 @@ struct intel_sdvo_enhancements_arg { #define SDVO_CMD_SET_AUDIO_STAT 0x91 #define SDVO_CMD_GET_AUDIO_STAT 0x92 #define SDVO_CMD_SET_HBUF_INDEX 0x93 + #define SDVO_HBUF_INDEX_ELD 0 + #define SDVO_HBUF_INDEX_AVI_IF 1 #define SDVO_CMD_GET_HBUF_INDEX 0x94 #define SDVO_CMD_GET_HBUF_INFO 0x95 #define SDVO_CMD_SET_HBUF_AV_SPLIT 0x96 -- cgit v1.2.3 From ae495e844a77344fdaedbb2ad97d925d096e9f0d Mon Sep 17 00:00:00 2001 From: Hui Wang Date: Thu, 25 Oct 2012 00:38:01 -0700 Subject: Input: egalax_ts - get gpio from devicetree The irq_to_gpio() is old, most platforms use GENERIC_GPIO framework and don't support this API anymore. The i.MX6q sabrelite platform equips an egalax touchscreen controller, and this platform already transfered to GENERIC_GPIO framework, to support this driver, we use a more generic way to get gpio. Add a return value checking for waking up the controller in the probe function, this guarantee only a workable device can pass init. [dmitry.torokhov@gmail.com: Make driver depend on CONFIG_OF as it is now required.] Acked-by Zhang Jiejing Reviewed-by: Shawn Guo Signed-off-by: Hui Wang Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/Kconfig | 2 +- drivers/input/touchscreen/egalax_ts.c | 23 +++++++++++++++++++++-- 2 files changed, 22 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 1ba232cbc09d..f7668b24c378 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -239,7 +239,7 @@ config TOUCHSCREEN_EETI config TOUCHSCREEN_EGALAX tristate "EETI eGalax multi-touch panel support" - depends on I2C + depends on I2C && OF help Say Y here to enable support for I2C connected EETI eGalax multi-touch panels. diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c index c1e3460f1195..13fa62fdfb0b 100644 --- a/drivers/input/touchscreen/egalax_ts.c +++ b/drivers/input/touchscreen/egalax_ts.c @@ -28,6 +28,7 @@ #include #include #include +#include /* * Mouse Mode: some panel may configure the controller to mouse mode, @@ -122,9 +123,17 @@ static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id) /* wake up controller by an falling edge of interrupt gpio. */ static int egalax_wake_up_device(struct i2c_client *client) { - int gpio = irq_to_gpio(client->irq); + struct device_node *np = client->dev.of_node; + int gpio; int ret; + if (!np) + return -ENODEV; + + gpio = of_get_named_gpio(np, "wakeup-gpios", 0); + if (!gpio_is_valid(gpio)) + return -ENODEV; + ret = gpio_request(gpio, "egalax_irq"); if (ret < 0) { dev_err(&client->dev, @@ -181,7 +190,11 @@ static int __devinit egalax_ts_probe(struct i2c_client *client, ts->input_dev = input_dev; /* controller may be in sleep, wake it up. */ - egalax_wake_up_device(client); + error = egalax_wake_up_device(client); + if (error) { + dev_err(&client->dev, "Failed to wake up the controller\n"); + goto err_free_dev; + } ret = egalax_firmware_version(client); if (ret < 0) { @@ -274,11 +287,17 @@ static int egalax_ts_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume); +static struct of_device_id egalax_ts_dt_ids[] = { + { .compatible = "eeti,egalax_ts" }, + { /* sentinel */ } +}; + static struct i2c_driver egalax_ts_driver = { .driver = { .name = "egalax_ts", .owner = THIS_MODULE, .pm = &egalax_ts_pm_ops, + .of_match_table = of_match_ptr(egalax_ts_dt_ids), }, .id_table = egalax_ts_id, .probe = egalax_ts_probe, -- cgit v1.2.3 From 88fd449e734a4264347e12b8ff74ccb33a9b9a35 Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Wed, 24 Oct 2012 23:53:02 -0700 Subject: Input: wacom - add INPUT_PROP_DIRECT flag to Cintiq 24HD Signed-off-by: Jason Gerecke Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index c3468c8dbd89..c30d4c937952 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1449,6 +1449,9 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0); + + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + wacom_setup_cintiq(wacom_wac); break; -- cgit v1.2.3 From 479696840239e0cc43efb3c917bdcad2174d2215 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 15 Oct 2012 21:48:48 -0300 Subject: i82975x_edac: Fix dimm label initialization The driver has only 4 hardcoded labels, but allows much more memory. Fix it by removing the hardcoded logic, using snprintf() instead. [ 19.833972] general protection fault: 0000 [#1] SMP [ 19.837733] Modules linked in: i82975x_edac(+) edac_core firewire_ohci firewire_core crc_itu_t nouveau mxm_wmi wmi video i2c_algo_bit drm_kms_helper ttm drm i2c_core [ 19.837733] CPU 0 [ 19.837733] Pid: 390, comm: udevd Not tainted 3.6.1-1.fc17.x86_64.debug #1 Dell Inc. Precision WorkStation 390 /0MY510 [ 19.837733] RIP: 0010:[] [] strncpy+0x18/0x30 [ 19.837733] RSP: 0018:ffff880078535b68 EFLAGS: 00010202 [ 19.837733] RAX: ffff880069fa9708 RBX: ffff880078588000 RCX: ffff880069fa9708 [ 19.837733] RDX: 000000000000001f RSI: 5f706f5f63616465 RDI: ffff880069fa9708 [ 19.837733] RBP: ffff880078535b68 R08: ffff880069fa9727 R09: 000000000000fffe [ 19.837733] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003 [ 19.837733] R13: 0000000000000000 R14: ffff880069fa9290 R15: ffff880079624a80 [ 19.837733] FS: 00007f3de01ee840(0000) GS:ffff88007c400000(0000) knlGS:0000000000000000 [ 19.837733] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 19.837733] CR2: 00007f3de00b9000 CR3: 0000000078dbc000 CR4: 00000000000007f0 [ 19.837733] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 19.837733] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 19.837733] Process udevd (pid: 390, threadinfo ffff880078534000, task ffff880079642450) [ 19.837733] Stack: [ 19.837733] ffff880078535c18 ffffffffa017c6b8 00040000816d627f ffff880079624a88 [ 19.837733] ffffc90004cd6000 ffff880079624520 ffff88007ac21148 0000000000000000 [ 19.837733] 0000000000000000 0004000000000000 feda000078535bc8 ffffffff810d696d [ 19.837733] Call Trace: [ 19.837733] [] i82975x_init_one+0x2e6/0x3e6 [i82975x_edac] ... Fix bug reported at: https://bugzilla.redhat.com/show_bug.cgi?id=848149 And, very likely: https://bbs.archlinux.org/viewtopic.php?id=148033 https://bugzilla.kernel.org/show_bug.cgi?id=47171 Cc: Alan Cox Signed-off-by: Mauro Carvalho Chehab --- drivers/edac/i82975x_edac.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/i82975x_edac.c b/drivers/edac/i82975x_edac.c index 069e26c11c4f..a98020409fa9 100644 --- a/drivers/edac/i82975x_edac.c +++ b/drivers/edac/i82975x_edac.c @@ -370,10 +370,6 @@ static enum dev_type i82975x_dram_type(void __iomem *mch_window, int rank) static void i82975x_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev, void __iomem *mch_window) { - static const char *labels[4] = { - "DIMM A1", "DIMM A2", - "DIMM B1", "DIMM B2" - }; struct csrow_info *csrow; unsigned long last_cumul_size; u8 value; @@ -423,9 +419,10 @@ static void i82975x_init_csrows(struct mem_ctl_info *mci, dimm = mci->csrows[index]->channels[chan]->dimm; dimm->nr_pages = nr_pages / csrow->nr_channels; - strncpy(csrow->channels[chan]->dimm->label, - labels[(index >> 1) + (chan * 2)], - EDAC_MC_LABEL_LEN); + + snprintf(csrow->channels[chan]->dimm->label, EDAC_MC_LABEL_LEN, "DIMM %c%d", + (chan == 0) ? 'A' : 'B', + index); dimm->grain = 1 << 7; /* 128Byte cache-line resolution */ dimm->dtype = i82975x_dram_type(mch_window, index); dimm->mtype = MEM_DDR2; /* I82975x supports only DDR2 */ -- cgit v1.2.3 From 24bef66e74d647aebd34e0bef7693512b7912029 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 24 Oct 2012 10:30:01 -0200 Subject: edac: Fix the dimm filling for csrows-based layouts The driver is currently filling data in a wrong way, on drivers for csrows-based memory controller, when the first layer is a csrow. This is not easily to notice, as, in general, memories are filed in dual, interleaved, symetric mode, as very few memory controllers support asymetric modes. While digging into a bug for i82795_edac driver, the asymetric mode there is now working, allowing us to fill the machine with 4x1GB ranks at channel 0, and 2x512GB at channel 1: Channel 0 ranks: EDAC DEBUG: i82975x_init_csrows: DIMM A0: from page 0x00000000 to 0x0003ffff (size: 0x00040000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM A1: from page 0x00040000 to 0x0007ffff (size: 0x00040000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM A2: from page 0x00080000 to 0x000bffff (size: 0x00040000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM A3: from page 0x000c0000 to 0x000fffff (size: 0x00040000 pages) Channel 1 ranks: EDAC DEBUG: i82975x_init_csrows: DIMM B0: from page 0x00100000 to 0x0011ffff (size: 0x00020000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM B1: from page 0x00120000 to 0x0013ffff (size: 0x00020000 pages) Instead of properly showing the memories as such, before this patch, it shows the memory layout as: +-----------------------------------+ | mc0 | | csrow0 | csrow1 | csrow2 | ----------+-----------------------------------+ channel1: | 1024 MB | 1024 MB | 512 MB | channel0: | 1024 MB | 1024 MB | 512 MB | ----------+-----------------------------------+ as if both channels were symetric, grouping the DIMMs on a wrong layout. After this patch, the memory is correctly represented. So, for csrows at layers[0], it shows: +-----------------------------------------------+ | mc0 | | csrow0 | csrow1 | csrow2 | csrow3 | ----------+-----------------------------------------------+ channel1: | 512 MB | 512 MB | 0 MB | 0 MB | channel0: | 1024 MB | 1024 MB | 1024 MB | 1024 MB | ----------+-----------------------------------------------+ For csrows at layers[1], it shows: +-----------------------+ | mc0 | | channel0 | channel1 | --------+-----------------------+ csrow3: | 1024 MB | 0 MB | csrow2: | 1024 MB | 0 MB | --------+-----------------------+ csrow1: | 1024 MB | 512 MB | csrow0: | 1024 MB | 512 MB | --------+-----------------------+ So, no matter of what comes first, the information between channel and csrow will be properly represented. Signed-off-by: Mauro Carvalho Chehab --- drivers/edac/edac_mc.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index d5dc9da7f99f..81eb9fd3f717 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -416,10 +416,18 @@ struct mem_ctl_info *edac_mc_alloc(unsigned mc_num, dimm->cschannel = chn; /* Increment csrow location */ - row++; - if (row == tot_csrows) { - row = 0; + if (layers[0].is_virt_csrow) { chn++; + if (chn == tot_channels) { + chn = 0; + row++; + } + } else { + row++; + if (row == tot_csrows) { + row = 0; + chn++; + } } /* Increment dimm location */ -- cgit v1.2.3 From 7e06b7a3333f5c7a0cec12aff20d39c5c87c0795 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 18 Oct 2012 15:54:45 +0200 Subject: i7300_edac: Fix error flag testing * Right-shift the values in GET_FBD_FAT_IDX and GET_FBD_NF_IDX, so that the callers get the result they expect. * Fix definition of FERR_FAT_FBD_ERR_MASK. * Call GET_FBD_NF_IDX, not GET_FBD_FAT_IDX, when operating on register FERR_NF_FBD. We were lucky they have the same definition. This fixes kernel bug #44131: https://bugzilla.kernel.org/show_bug.cgi?id=44131 Signed-off-by: Jean Delvare Cc: Mauro Carvalho Chehab Cc: Doug Thompson Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/edac/i7300_edac.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/i7300_edac.c b/drivers/edac/i7300_edac.c index a09d0667f72a..9d669cd43618 100644 --- a/drivers/edac/i7300_edac.c +++ b/drivers/edac/i7300_edac.c @@ -197,8 +197,8 @@ static const char *ferr_fat_fbd_name[] = { [0] = "Memory Write error on non-redundant retry or " "FBD configuration Write error on retry", }; -#define GET_FBD_FAT_IDX(fbderr) (fbderr & (3 << 28)) -#define FERR_FAT_FBD_ERR_MASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 << 3)) +#define GET_FBD_FAT_IDX(fbderr) (((fbderr) >> 28) & 3) +#define FERR_FAT_FBD_ERR_MASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 << 22)) #define FERR_NF_FBD 0xa0 static const char *ferr_nf_fbd_name[] = { @@ -225,7 +225,7 @@ static const char *ferr_nf_fbd_name[] = { [1] = "Aliased Uncorrectable Non-Mirrored Demand Data ECC", [0] = "Uncorrectable Data ECC on Replay", }; -#define GET_FBD_NF_IDX(fbderr) (fbderr & (3 << 28)) +#define GET_FBD_NF_IDX(fbderr) (((fbderr) >> 28) & 3) #define FERR_NF_FBD_ERR_MASK ((1 << 24) | (1 << 23) | (1 << 22) | (1 << 21) |\ (1 << 18) | (1 << 17) | (1 << 16) | (1 << 15) |\ (1 << 14) | (1 << 13) | (1 << 11) | (1 << 10) |\ @@ -464,7 +464,7 @@ static void i7300_process_fbd_error(struct mem_ctl_info *mci) errnum = find_first_bit(&errors, ARRAY_SIZE(ferr_nf_fbd_name)); specific = GET_ERR_FROM_TABLE(ferr_nf_fbd_name, errnum); - branch = (GET_FBD_FAT_IDX(error_reg) == 2) ? 1 : 0; + branch = (GET_FBD_NF_IDX(error_reg) == 2) ? 1 : 0; pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map, REDMEMA, &syndrome); -- cgit v1.2.3 From ea29c4ea2b04462e92f409cd852dfe0d6d04f0fc Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 15 Oct 2012 12:48:11 +0300 Subject: OMAPDSS: DSI: fix dsi_get_dsidev_from_id() If dsi_get_dsidev_from_id() is called with a DSI module id that does not exist on the board, the function will crash as omap_dss_get_output() will return NULL. This happens on omap3 boards when dumping DSI clocks, as the dumping code will try to get the dsidev for DSI modules 0 and 1, but omap3 only has DSI module 0. Also clean up the id -> output mapping, so that if the function is called with invalid module ID it will return NULL. Signed-off-by: Tomi Valkeinen Cc: Archit Taneja --- drivers/video/omap2/dss/dsi.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index d64ac3842884..bee92846cfab 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -365,11 +365,20 @@ struct platform_device *dsi_get_dsidev_from_id(int module) struct omap_dss_output *out; enum omap_dss_output_id id; - id = module == 0 ? OMAP_DSS_OUTPUT_DSI1 : OMAP_DSS_OUTPUT_DSI2; + switch (module) { + case 0: + id = OMAP_DSS_OUTPUT_DSI1; + break; + case 1: + id = OMAP_DSS_OUTPUT_DSI2; + break; + default: + return NULL; + } out = omap_dss_get_output(id); - return out->pdev; + return out ? out->pdev : NULL; } static inline void dsi_write_reg(struct platform_device *dsidev, -- cgit v1.2.3 From 41fd087f5d452361d58cb618b1b8ecf749b68ad6 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 19 Oct 2012 08:24:18 -0300 Subject: [media] s5p-fimc: Don't ignore return value of vb2_queue_init() Add missing checks for return value of vb2_queue_init(), after this function has been modified recently to not throw BUG_ON(). This eliminates related compiler warnings, drivers/media/platform/s5p-fimc/fimc-lite.c: In function fimc_lite_subdev_registered: drivers/media/platform/s5p-fimc/fimc-lite.c:1256:16: warning: ignoring return value of vb2_queue_init, declared with attribute warn_unused_result [-Wunused-result] drivers/media/platform/s5p-fimc/fimc-capture.c: In function fimc_register_capture_device: drivers/media/platform/s5p-fimc/fimc-capture.c:1739:16: warning: ignoring return value of vb2_queue_init, declared with attribute warn_unused_result [-Wunused-result] Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/s5p-fimc/fimc-capture.c | 4 +++- drivers/media/platform/s5p-fimc/fimc-lite.c | 4 +++- 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/s5p-fimc/fimc-capture.c b/drivers/media/platform/s5p-fimc/fimc-capture.c index 367efd164d0f..3d39d97abaa5 100644 --- a/drivers/media/platform/s5p-fimc/fimc-capture.c +++ b/drivers/media/platform/s5p-fimc/fimc-capture.c @@ -1736,7 +1736,9 @@ static int fimc_register_capture_device(struct fimc_dev *fimc, q->mem_ops = &vb2_dma_contig_memops; q->buf_struct_size = sizeof(struct fimc_vid_buffer); - vb2_queue_init(q); + ret = vb2_queue_init(q); + if (ret) + goto err_ent; vid_cap->vd_pad.flags = MEDIA_PAD_FL_SINK; ret = media_entity_init(&vfd->entity, 1, &vid_cap->vd_pad, 0); diff --git a/drivers/media/platform/s5p-fimc/fimc-lite.c b/drivers/media/platform/s5p-fimc/fimc-lite.c index 70bcf39de879..9db246bed841 100644 --- a/drivers/media/platform/s5p-fimc/fimc-lite.c +++ b/drivers/media/platform/s5p-fimc/fimc-lite.c @@ -1253,7 +1253,9 @@ static int fimc_lite_subdev_registered(struct v4l2_subdev *sd) q->buf_struct_size = sizeof(struct flite_buffer); q->drv_priv = fimc; - vb2_queue_init(q); + ret = vb2_queue_init(q); + if (ret < 0) + return ret; fimc->vd_pad.flags = MEDIA_PAD_FL_SINK; ret = media_entity_init(&vfd->entity, 1, &fimc->vd_pad, 0); -- cgit v1.2.3 From 02924ca45893adb9ad2383696006272fe8c2ef64 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Mon, 22 Oct 2012 06:12:05 -0300 Subject: [media] s5p-csis: Select S5P_SETUP_MIPIPHY After commit ccbfd1d49dc0d6a "[media] s5p-csis: Replace phy_enable platform.." s5p-csis depends now on the commmon MIPI CSIS/MIPI DSIM DPHY control code. Add select S5P_SETUP_MIPIPHY to make this dependency explicit, until the code from arch/arm/plat-samsung is moved to drivers/ directory and converted to a regular phy driver module. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/s5p-fimc/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/platform/s5p-fimc/Kconfig b/drivers/media/platform/s5p-fimc/Kconfig index 8f090a8f270e..c16b20d86ed2 100644 --- a/drivers/media/platform/s5p-fimc/Kconfig +++ b/drivers/media/platform/s5p-fimc/Kconfig @@ -24,6 +24,7 @@ config VIDEO_S5P_FIMC config VIDEO_S5P_MIPI_CSIS tristate "S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver" depends on REGULATOR + select S5P_SETUP_MIPIPHY help This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2 receiver (MIPI-CSIS) devices. -- cgit v1.2.3 From afd7348c60b4f5d3d4d041aa0c29a6258a476b89 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Thu, 25 Oct 2012 10:48:44 -0300 Subject: [media] s5p-fimc: Fix platform entities registration Make sure the platform sub-devices are registered to the media device driver only when v4l2_device_register_subdev() succeeds. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/s5p-fimc/fimc-mdevice.c | 33 +++++++++++++------------- 1 file changed, 16 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/s5p-fimc/fimc-mdevice.c b/drivers/media/platform/s5p-fimc/fimc-mdevice.c index 80ada5882f62..a55370219a96 100644 --- a/drivers/media/platform/s5p-fimc/fimc-mdevice.c +++ b/drivers/media/platform/s5p-fimc/fimc-mdevice.c @@ -345,25 +345,23 @@ static int fimc_register_callback(struct device *dev, void *p) struct fimc_dev *fimc = dev_get_drvdata(dev); struct v4l2_subdev *sd = &fimc->vid_cap.subdev; struct fimc_md *fmd = p; - int ret = 0; - - if (!fimc || !fimc->pdev) - return 0; + int ret; - if (fimc->pdev->id < 0 || fimc->pdev->id >= FIMC_MAX_DEVS) + if (fimc == NULL || fimc->id >= FIMC_MAX_DEVS) return 0; - fimc->pipeline_ops = &fimc_pipeline_ops; - fmd->fimc[fimc->pdev->id] = fimc; sd->grp_id = FIMC_GROUP_ID; ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd); if (ret) { v4l2_err(&fmd->v4l2_dev, "Failed to register FIMC.%d (%d)\n", fimc->id, ret); + return ret; } - return ret; + fimc->pipeline_ops = &fimc_pipeline_ops; + fmd->fimc[fimc->id] = fimc; + return 0; } static int fimc_lite_register_callback(struct device *dev, void *p) @@ -373,14 +371,9 @@ static int fimc_lite_register_callback(struct device *dev, void *p) struct fimc_md *fmd = p; int ret; - if (fimc == NULL) + if (fimc == NULL || fimc->index >= FIMC_LITE_MAX_DEVS) return 0; - if (fimc->index >= FIMC_LITE_MAX_DEVS) - return 0; - - fimc->pipeline_ops = &fimc_pipeline_ops; - fmd->fimc_lite[fimc->index] = fimc; sd->grp_id = FLITE_GROUP_ID; ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd); @@ -388,8 +381,12 @@ static int fimc_lite_register_callback(struct device *dev, void *p) v4l2_err(&fmd->v4l2_dev, "Failed to register FIMC-LITE.%d (%d)\n", fimc->index, ret); + return ret; } - return ret; + + fimc->pipeline_ops = &fimc_pipeline_ops; + fmd->fimc_lite[fimc->index] = fimc; + return 0; } static int csis_register_callback(struct device *dev, void *p) @@ -407,10 +404,12 @@ static int csis_register_callback(struct device *dev, void *p) v4l2_info(sd, "csis%d sd: %s\n", pdev->id, sd->name); id = pdev->id < 0 ? 0 : pdev->id; - fmd->csis[id].sd = sd; sd->grp_id = CSIS_GROUP_ID; + ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd); - if (ret) + if (!ret) + fmd->csis[id].sd = sd; + else v4l2_err(&fmd->v4l2_dev, "Failed to register CSIS subdevice: %d\n", ret); return ret; -- cgit v1.2.3 From 8163ec0b2648c2f7e84edb969dde537ec45f1666 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Thu, 25 Oct 2012 10:56:00 -0300 Subject: [media] s5p-fimc: Fix potential NULL pointer dereference 'fimc' was being dereferenced before the NULL check. Moved it to after the check. Signed-off-by: Sachin Kamat Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/s5p-fimc/fimc-mdevice.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/s5p-fimc/fimc-mdevice.c b/drivers/media/platform/s5p-fimc/fimc-mdevice.c index a55370219a96..38ea4d143a49 100644 --- a/drivers/media/platform/s5p-fimc/fimc-mdevice.c +++ b/drivers/media/platform/s5p-fimc/fimc-mdevice.c @@ -343,13 +343,14 @@ static int fimc_md_register_sensor_entities(struct fimc_md *fmd) static int fimc_register_callback(struct device *dev, void *p) { struct fimc_dev *fimc = dev_get_drvdata(dev); - struct v4l2_subdev *sd = &fimc->vid_cap.subdev; + struct v4l2_subdev *sd; struct fimc_md *fmd = p; int ret; if (fimc == NULL || fimc->id >= FIMC_MAX_DEVS) return 0; + sd = &fimc->vid_cap.subdev; sd->grp_id = FIMC_GROUP_ID; ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd); @@ -367,16 +368,15 @@ static int fimc_register_callback(struct device *dev, void *p) static int fimc_lite_register_callback(struct device *dev, void *p) { struct fimc_lite *fimc = dev_get_drvdata(dev); - struct v4l2_subdev *sd = &fimc->subdev; struct fimc_md *fmd = p; int ret; if (fimc == NULL || fimc->index >= FIMC_LITE_MAX_DEVS) return 0; - sd->grp_id = FLITE_GROUP_ID; + fimc->subdev.grp_id = FLITE_GROUP_ID; - ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd); + ret = v4l2_device_register_subdev(&fmd->v4l2_dev, &fimc->subdev); if (ret) { v4l2_err(&fmd->v4l2_dev, "Failed to register FIMC-LITE.%d (%d)\n", -- cgit v1.2.3 From b0f9bf369f34791cf8271be8c610a1e50ead6002 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 8 Oct 2012 08:35:56 -0300 Subject: [media] dvb-frontends: fix potential NULL pointer dereference in stv0900_set_mclk() The dereference should be moved below the NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb-frontends/stv0900_core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb-frontends/stv0900_core.c b/drivers/media/dvb-frontends/stv0900_core.c index 262dfa503c2a..b551ca350e00 100644 --- a/drivers/media/dvb-frontends/stv0900_core.c +++ b/drivers/media/dvb-frontends/stv0900_core.c @@ -300,15 +300,15 @@ static enum fe_stv0900_error stv0900_set_mclk(struct stv0900_internal *intp, u32 { u32 m_div, clk_sel; - dprintk("%s: Mclk set to %d, Quartz = %d\n", __func__, mclk, - intp->quartz); - if (intp == NULL) return STV0900_INVALID_HANDLE; if (intp->errs) return STV0900_I2C_ERROR; + dprintk("%s: Mclk set to %d, Quartz = %d\n", __func__, mclk, + intp->quartz); + clk_sel = ((stv0900_get_bits(intp, F0900_SELX1RATIO) == 1) ? 4 : 6); m_div = ((clk_sel * mclk) / intp->quartz) - 1; stv0900_write_bits(intp, F0900_M_DIV, m_div); -- cgit v1.2.3 From 1fa48cd5c4f1403db1f5a55ea3c346a33f39a33a Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 12 Oct 2012 11:28:40 -0300 Subject: [media] omap3isp: video: Fix warning caused by bad vidioc_s_crop prototype Commit 4f996594 ("v4l2: make vidioc_s_crop const") modified the vidioc_s_crop operation prototype but forgot to update the OMAP3 ISP driver. Add a const keyword to fix the function prototype. Signed-off-by: Laurent Pinchart Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/omap3isp/ispvideo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/platform/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c index a0b737fecf13..75cd309035f9 100644 --- a/drivers/media/platform/omap3isp/ispvideo.c +++ b/drivers/media/platform/omap3isp/ispvideo.c @@ -792,7 +792,7 @@ isp_video_get_crop(struct file *file, void *fh, struct v4l2_crop *crop) } static int -isp_video_set_crop(struct file *file, void *fh, struct v4l2_crop *crop) +isp_video_set_crop(struct file *file, void *fh, const struct v4l2_crop *crop) { struct isp_video *video = video_drvdata(file); struct v4l2_subdev *subdev; -- cgit v1.2.3 From 55c8504672adfb8065da5196ce1cce7db97532d0 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 12 Oct 2012 11:20:10 -0300 Subject: [media] omap3isp: Fix warning caused by bad subdev events operations prototypes Remove the const keyword from the V4L2 subdev events operations to match the V4L2 API. Signed-off-by: Laurent Pinchart Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/omap3isp/ispccdc.c | 4 ++-- drivers/media/platform/omap3isp/ispstat.c | 4 ++-- drivers/media/platform/omap3isp/ispstat.h | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/omap3isp/ispccdc.c b/drivers/media/platform/omap3isp/ispccdc.c index 60181ab96063..aa9df9d71a7b 100644 --- a/drivers/media/platform/omap3isp/ispccdc.c +++ b/drivers/media/platform/omap3isp/ispccdc.c @@ -1706,7 +1706,7 @@ static long ccdc_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) } static int ccdc_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh, - const struct v4l2_event_subscription *sub) + struct v4l2_event_subscription *sub) { if (sub->type != V4L2_EVENT_FRAME_SYNC) return -EINVAL; @@ -1719,7 +1719,7 @@ static int ccdc_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh, } static int ccdc_unsubscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh, - const struct v4l2_event_subscription *sub) + struct v4l2_event_subscription *sub) { return v4l2_event_unsubscribe(fh, sub); } diff --git a/drivers/media/platform/omap3isp/ispstat.c b/drivers/media/platform/omap3isp/ispstat.c index d7ac76b5c2ae..b8640be692f1 100644 --- a/drivers/media/platform/omap3isp/ispstat.c +++ b/drivers/media/platform/omap3isp/ispstat.c @@ -1025,7 +1025,7 @@ void omap3isp_stat_dma_isr(struct ispstat *stat) int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev, struct v4l2_fh *fh, - const struct v4l2_event_subscription *sub) + struct v4l2_event_subscription *sub) { struct ispstat *stat = v4l2_get_subdevdata(subdev); @@ -1037,7 +1037,7 @@ int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev, int omap3isp_stat_unsubscribe_event(struct v4l2_subdev *subdev, struct v4l2_fh *fh, - const struct v4l2_event_subscription *sub) + struct v4l2_event_subscription *sub) { return v4l2_event_unsubscribe(fh, sub); } diff --git a/drivers/media/platform/omap3isp/ispstat.h b/drivers/media/platform/omap3isp/ispstat.h index a6fe653eb237..9b7c8654dc8a 100644 --- a/drivers/media/platform/omap3isp/ispstat.h +++ b/drivers/media/platform/omap3isp/ispstat.h @@ -147,10 +147,10 @@ int omap3isp_stat_init(struct ispstat *stat, const char *name, void omap3isp_stat_cleanup(struct ispstat *stat); int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev, struct v4l2_fh *fh, - const struct v4l2_event_subscription *sub); + struct v4l2_event_subscription *sub); int omap3isp_stat_unsubscribe_event(struct v4l2_subdev *subdev, struct v4l2_fh *fh, - const struct v4l2_event_subscription *sub); + struct v4l2_event_subscription *sub); int omap3isp_stat_s_stream(struct v4l2_subdev *subdev, int enable); int omap3isp_stat_busy(struct ispstat *stat); -- cgit v1.2.3 From f65e384bec59ef35dfa77455181af2ecf7a7ef44 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 25 Oct 2012 20:42:10 +0200 Subject: omapdss: dss: Fix clocks on OMAP363x Commit 185bae1095188aa199c9be64d6030d8dbfc65e0a ("OMAPDSS: DSS: Cleanup cpu_is_xxxx checks") broke the DSS clocks configuration by erroneously using the clock parameters applicable to all other OMAP34xx SoCs for the OMAP363x. This went unnoticed probably because the cpu_is_omap34xx() class check wasn't seen as matching the OMAP363x subclass. Fix it by checking for the OMAP363x subclass before checking for the OMAP34xx class. Signed-off-by: Laurent Pinchart Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dss.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c index 2ab1c3e96553..0bb7406bdbb8 100644 --- a/drivers/video/omap2/dss/dss.c +++ b/drivers/video/omap2/dss/dss.c @@ -805,10 +805,10 @@ static int __init dss_init_features(struct device *dev) if (cpu_is_omap24xx()) src = &omap24xx_dss_feats; - else if (cpu_is_omap34xx()) - src = &omap34xx_dss_feats; else if (cpu_is_omap3630()) src = &omap3630_dss_feats; + else if (cpu_is_omap34xx()) + src = &omap34xx_dss_feats; else if (cpu_is_omap44xx()) src = &omap44xx_dss_feats; else if (soc_is_omap54xx()) -- cgit v1.2.3 From dffc70ade1d13edd186f542718c4d78a31d92fb8 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 21 Oct 2012 20:54:26 +0800 Subject: OMAPDSS: HDMI: fix missing unlock on error in hdmi_dump_regs() Add the missing unlock on the error handling path in function hdmi_dump_regs(). Signed-off-by: Wei Yongjun Reviewed-by: Sumit Semwal Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/hdmi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c index a48a7dd75b33..8c9b8b3b7f77 100644 --- a/drivers/video/omap2/dss/hdmi.c +++ b/drivers/video/omap2/dss/hdmi.c @@ -644,8 +644,10 @@ static void hdmi_dump_regs(struct seq_file *s) { mutex_lock(&hdmi.lock); - if (hdmi_runtime_get()) + if (hdmi_runtime_get()) { + mutex_unlock(&hdmi.lock); return; + } hdmi.ip_data.ops->dump_wrapper(&hdmi.ip_data, s); hdmi.ip_data.ops->dump_pll(&hdmi.ip_data, s); -- cgit v1.2.3 From 00a89180e5419f6567135d86e66a989a1b610b45 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 26 Oct 2012 09:55:31 +0300 Subject: Revert "usb: musb: use DMA mode 1 whenever possible" This reverts commit 4f3e8d263d34e52e75b5adfa14811467d3033d8e. it turns out that current implementation of Mode 1 DMA added a few regressions to some users, so we need to revert this patch and let author work on a better version of Mode 1 DMA support. Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_gadget.c | 30 ++++++++++++++++++++++++++---- 1 file changed, 26 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index d0b87e7b4abf..b6b84dacc791 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -707,11 +707,12 @@ static void rxstate(struct musb *musb, struct musb_request *req) fifo_count = musb_readw(epio, MUSB_RXCOUNT); /* - * use mode 1 only if we expect data of at least ep packet_sz - * and have not yet received a short packet + * Enable Mode 1 on RX transfers only when short_not_ok flag + * is set. Currently short_not_ok flag is set only from + * file_storage and f_mass_storage drivers */ - if ((request->length - request->actual >= musb_ep->packet_sz) && - (fifo_count >= musb_ep->packet_sz)) + + if (request->short_not_ok && fifo_count == musb_ep->packet_sz) use_mode_1 = 1; else use_mode_1 = 0; @@ -727,6 +728,27 @@ static void rxstate(struct musb *musb, struct musb_request *req) c = musb->dma_controller; channel = musb_ep->dma; + /* We use DMA Req mode 0 in rx_csr, and DMA controller operates in + * mode 0 only. So we do not get endpoint interrupts due to DMA + * completion. We only get interrupts from DMA controller. + * + * We could operate in DMA mode 1 if we knew the size of the tranfer + * in advance. For mass storage class, request->length = what the host + * sends, so that'd work. But for pretty much everything else, + * request->length is routinely more than what the host sends. For + * most these gadgets, end of is signified either by a short packet, + * or filling the last byte of the buffer. (Sending extra data in + * that last pckate should trigger an overflow fault.) But in mode 1, + * we don't get DMA completion interrupt for short packets. + * + * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1), + * to get endpoint interrupt on every DMA req, but that didn't seem + * to work reliably. + * + * REVISIT an updated g_file_storage can set req->short_not_ok, which + * then becomes usable as a runtime "use mode 1" hint... + */ + /* Experimental: Mode1 works with mass storage use cases */ if (use_mode_1) { csr |= MUSB_RXCSR_AUTOCLEAR; -- cgit v1.2.3 From ad2fab36d7922401c4576fb7ea9b21a47a29a17f Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 25 Oct 2012 14:03:03 +0300 Subject: gpiolib: Don't return -EPROBE_DEFER to sysfs, or for invalid gpios gpios requested with invalid numbers, or gpios requested from userspace via sysfs should not try to be deferred on failure. Cc: stable@kernel.org Signed-off-by: Mathias Nyman Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 5d6c71edc739..1c8d9e3380e1 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -623,9 +623,11 @@ static ssize_t export_store(struct class *class, */ status = gpio_request(gpio, "sysfs"); - if (status < 0) + if (status < 0) { + if (status == -EPROBE_DEFER) + status = -ENODEV; goto done; - + } status = gpio_export(gpio, true); if (status < 0) gpio_free(gpio); @@ -1191,8 +1193,10 @@ int gpio_request(unsigned gpio, const char *label) spin_lock_irqsave(&gpio_lock, flags); - if (!gpio_is_valid(gpio)) + if (!gpio_is_valid(gpio)) { + status = -EINVAL; goto done; + } desc = &gpio_desc[gpio]; chip = desc->chip; if (chip == NULL) -- cgit v1.2.3 From 9a65d162e449145706aa7309a1be00e3c3d5c80e Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 23 Oct 2012 14:12:37 +0800 Subject: usb: musb: ux500: fix 'musbid' undeclared error in ux500_remove() commit 65b3d52d02a558fbfe08e43688e15390c5ab3067 (usb: musb: add musb_ida for multi instance support) used musbid in ux500_remove() but nerver declared it. I found this in x86_64 platform, but not sure whether this is a error on the correct ARCH. $ make drivers/usb/musb/ux500.o make[1]: Nothing to be done for `all'. make[1]: Nothing to be done for `relocs'. CHK include/generated/uapi/linux/version.h CHK include/generated/utsrelease.h UPD include/generated/utsrelease.h CALL scripts/checksyscalls.sh CC drivers/usb/musb/ux500.o drivers/usb/musb/ux500.c: In function 'ux500_probe': drivers/usb/musb/ux500.c:78:2: error: 'musbid' undeclared (first use in this function) drivers/usb/musb/ux500.c:78:2: note: each undeclared identifier is reported only once for each function it appears in make[1]: *** [drivers/usb/musb/ux500.o] Error 1 make: *** [drivers/usb/musb/ux500.o] Error 2 Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi --- drivers/usb/musb/ux500.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index d62a91fedc22..0e62f504410e 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -65,7 +65,7 @@ static int __devinit ux500_probe(struct platform_device *pdev) struct platform_device *musb; struct ux500_glue *glue; struct clk *clk; - + int musbid; int ret = -ENOMEM; glue = kzalloc(sizeof(*glue), GFP_KERNEL); -- cgit v1.2.3 From 31370f75de4b641f47204899549d2a533cd42738 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Wed, 24 Oct 2012 11:22:52 +0200 Subject: s390/cio: suppress 2nd path verification during resume Do not trigger a path verification in the subchannel event function during resume from hibernate. This will be started by the pm_restore callback later. Signed-off-by: Sebastian Ott Reviewed-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/device.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index fc916f5d7314..fd3143c291c6 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -1424,7 +1424,7 @@ static enum io_sch_action sch_get_action(struct subchannel *sch) } if (device_is_disconnected(cdev)) return IO_SCH_REPROBE; - if (cdev->online) + if (cdev->online && !cdev->private->flags.resuming) return IO_SCH_VERIFY; if (cdev->private->state == DEV_STATE_NOT_OPER) return IO_SCH_UNREG_ATTACH; @@ -1469,12 +1469,6 @@ static int io_subchannel_sch_event(struct subchannel *sch, int process) rc = 0; goto out_unlock; case IO_SCH_VERIFY: - if (cdev->private->flags.resuming == 1) { - if (cio_enable_subchannel(sch, (u32)(addr_t)sch)) { - ccw_device_set_notoper(cdev); - break; - } - } /* Trigger path verification. */ io_subchannel_verify(sch); rc = 0; -- cgit v1.2.3 From e86b618547bb0c7db96aa70491112f032b3bec1c Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Thu, 25 Oct 2012 10:57:38 +0300 Subject: drm/i915: be less verbose about inability to provide vendor backlight commit 28dcc2d60cb570d9f549c329b2f51400553412a1 Author: Jani Nikula Date: Mon Sep 3 16:25:12 2012 +0300 drm/i915: do not expose a dysfunctional backlight interface to userspace prevents backlight interface creation if the BIOS has not set the backlight PWM CTL registers that contain the max PWM value. It's apparently normal on those machines, so demote the message about it to debug level. Reported-by: Orion Poplawski Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56330 Signed-off-by: Jani Nikula Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_panel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index e019b2369861..e2aacd329545 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -435,7 +435,7 @@ int intel_panel_setup_backlight(struct drm_device *dev) props.type = BACKLIGHT_RAW; props.max_brightness = _intel_panel_get_max_backlight(dev); if (props.max_brightness == 0) { - DRM_ERROR("Failed to get maximum backlight value\n"); + DRM_DEBUG_DRIVER("Failed to get maximum backlight value\n"); return -ENODEV; } dev_priv->backlight = -- cgit v1.2.3 From 1623392af9da983f3ad088a75076c9da05e5600d Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 26 Oct 2012 12:06:41 +0100 Subject: drm/i915: Only kick out vesafb if we takeover the fbcon with KMS Otherwise we may remove the only console for a nomodeset system. We became more aggressive in our kicking with commit e188719a2891f01b3100dca4ae3a055fb5a7ab52 Author: Daniel Vetter Date: Tue Jun 12 11:28:17 2012 +0200 drm/i915: kick any firmware framebuffers before claiming the gtt Reported-and-tested-by: monnier@iro.umontreal.ca Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54615 Signed-off-by: Chris Wilson Cc: stable@vger.kernel.org # v3.6 Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_dma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index c9bfd83dde64..61ae104dca8c 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1505,7 +1505,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) goto put_gmch; } - i915_kick_out_firmware_fb(dev_priv); + if (drm_core_check_feature(dev, DRIVER_MODESET)) + i915_kick_out_firmware_fb(dev_priv); pci_set_master(dev->pdev); -- cgit v1.2.3 From 29c08cdabd323adf7fcc0d26077383d4daf7b09a Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Tue, 9 Oct 2012 12:12:14 -0700 Subject: qla2xxx: Add missing ->vport_slock while calling qlt_update_vp_map All other callers of qlt_update_vp_map() already hold ->vport_slock while updating the vp target map, so go ahead and add the missing ->vport_slock within qla24xx_disable_vp() code. Cc: Saurav Kashyap Cc: Chad Dupuis Cc: Arun Easi Cc: Andrew Vasquez Cc: Jiri Kosina Cc: Roland Dreier Acked-by: Saurav Kashyap Signed-off-by: Nicholas Bellinger --- drivers/scsi/qla2xxx/qla_mid.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index bd4708a422cd..20fd974f903a 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -149,6 +149,7 @@ qla2x00_mark_vp_devices_dead(scsi_qla_host_t *vha) int qla24xx_disable_vp(scsi_qla_host_t *vha) { + unsigned long flags; int ret; ret = qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL); @@ -156,7 +157,9 @@ qla24xx_disable_vp(scsi_qla_host_t *vha) atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); /* Remove port id from vp target map */ + spin_lock_irqsave(&vha->hw->vport_slock, flags); qlt_update_vp_map(vha, RESET_AL_PA); + spin_unlock_irqrestore(&vha->hw->vport_slock, flags); qla2x00_mark_vp_devices_dead(vha); atomic_set(&vha->vp_state, VP_FAILED); -- cgit v1.2.3 From c046aa0f0f47719a38854fc6383216392b130704 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 11 Oct 2012 13:41:31 -0700 Subject: tcm_qla2xxx: Format VPD page 83h SCSI name string according to SPC My draft of SPC-4 says the following about the SCSI name string in inquiry VPD page 83h: The SCSI NAME STRING field starts with either: a) the four UTF-8 characters 'eui.' concatenated with 16, 24, or 32 hexadecimal digits (i.e., the UTF-8 characters 0 through 9 and A through F) for an EUI-64 based identifier (see 7.8.6.5). The first hexadecimal digit shall be the most significant four bits of the first byte (i.e., most significant byte) of the EUI-64 based identifier; b) the four UTF-8 characters 'naa.' concatenated with 16 or 32 hexadecimal digits for an NAA identifier (see 7.8.6.6). The first hexadecimal digit shall be the most significant four bits of the first byte (i.e., most significant byte) of the NAA identifier; or c) the four UTF-8 characters 'iqn.' concatenated with an iSCSI Name for an iSCSI-name based identifier (see iSCSI). However, the .tpg_get_wwn method for tcm_qla2xxx formats the WWN so the SCSI name string looks like "52:4a:93:7d:24:5f:b2:12,t,0x0001". This patch corrects the code so that VPD 83h gives a SPC-compliant SCSI name string like "naa.524a937d245fb212,t,0x0001" while leavig other uses alone (so configfs will still work with ':' separated WWNs). Signed-off-by: Roland Dreier Cc: Chad Dupuis Cc: Arun Easi Cc: Saurav Kashyap Signed-off-by: Nicholas Bellinger --- drivers/scsi/qla2xxx/tcm_qla2xxx.c | 4 +++- drivers/scsi/qla2xxx/tcm_qla2xxx.h | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index 2358c16c4c8e..d8211ccc413a 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -237,7 +237,7 @@ static char *tcm_qla2xxx_get_fabric_wwn(struct se_portal_group *se_tpg) struct tcm_qla2xxx_tpg, se_tpg); struct tcm_qla2xxx_lport *lport = tpg->lport; - return &lport->lport_name[0]; + return lport->lport_naa_name; } static char *tcm_qla2xxx_npiv_get_fabric_wwn(struct se_portal_group *se_tpg) @@ -1534,6 +1534,7 @@ static struct se_wwn *tcm_qla2xxx_make_lport( lport->lport_wwpn = wwpn; tcm_qla2xxx_format_wwn(&lport->lport_name[0], TCM_QLA2XXX_NAMELEN, wwpn); + sprintf(lport->lport_naa_name, "naa.%016llx", (unsigned long long) wwpn); ret = tcm_qla2xxx_init_lport(lport); if (ret != 0) @@ -1601,6 +1602,7 @@ static struct se_wwn *tcm_qla2xxx_npiv_make_lport( lport->lport_npiv_wwnn = npiv_wwnn; tcm_qla2xxx_npiv_format_wwn(&lport->lport_npiv_name[0], TCM_QLA2XXX_NAMELEN, npiv_wwpn, npiv_wwnn); + sprintf(lport->lport_naa_name, "naa.%016llx", (unsigned long long) npiv_wwpn); /* FIXME: tcm_qla2xxx_npiv_make_lport */ ret = -ENOSYS; diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.h b/drivers/scsi/qla2xxx/tcm_qla2xxx.h index 825498103352..9ba075fe9781 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.h +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.h @@ -61,6 +61,8 @@ struct tcm_qla2xxx_lport { u64 lport_npiv_wwnn; /* ASCII formatted WWPN for FC Target Lport */ char lport_name[TCM_QLA2XXX_NAMELEN]; + /* ASCII formatted naa WWPN for VPD page 83 etc */ + char lport_naa_name[TCM_QLA2XXX_NAMELEN]; /* ASCII formatted WWPN+WWNN for NPIV FC Target Lport */ char lport_npiv_name[TCM_QLA2XXX_NPIV_NAMELEN]; /* map for fc_port pointers in 24-bit FC Port ID space */ -- cgit v1.2.3 From c8292d1da53fa60c7516ab03a9d83f7ea266d335 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 11 Oct 2012 13:41:32 -0700 Subject: qla2xxx: Update target lookup session tables when a target session changes It is possible for the target code to change the loop_id or s_id of a target session in reaction to an FC fabric change. However, the session structures are stored in tables that are indexed by these two keys, and if we just change the session structure but leave the pointers to it in the old places in the table, havoc can ensue. For example, a new session might come along that should go in the old slot in the table and overwrite the old session pointer. To handle this, add a new tgt_ops->update_sess() method that also updates the "by loop_id" and "by s_id" lookup tables when a session changes, so that the keys where a session pointer is stored in these tables always matches the keys in the session structure itself. (nab: Drop unnecessary double inversion with FCF_CONF_COMP_SUPPORTED usage) Signed-off-by: Roland Dreier Cc: Chad Dupuis Cc: Arun Easi Cc: Saurav Kashyap Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/scsi/qla2xxx/qla_target.c | 25 ++++++------- drivers/scsi/qla2xxx/qla_target.h | 1 + drivers/scsi/qla2xxx/tcm_qla2xxx.c | 73 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 85 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 0e09d8f433d1..62aa5584f644 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -557,6 +557,7 @@ static bool qlt_check_fcport_exist(struct scsi_qla_host *vha, int pmap_len; fc_port_t *fcport; int global_resets; + unsigned long flags; retry: global_resets = atomic_read(&ha->tgt.qla_tgt->tgt_global_resets_count); @@ -625,10 +626,10 @@ retry: sess->s_id.b.area, sess->loop_id, fcport->d_id.b.domain, fcport->d_id.b.al_pa, fcport->d_id.b.area, fcport->loop_id); - sess->s_id = fcport->d_id; - sess->loop_id = fcport->loop_id; - sess->conf_compl_supported = !!(fcport->flags & - FCF_CONF_COMP_SUPPORTED); + spin_lock_irqsave(&ha->hardware_lock, flags); + ha->tgt.tgt_ops->update_sess(sess, fcport->d_id, fcport->loop_id, + (fcport->flags & FCF_CONF_COMP_SUPPORTED)); + spin_unlock_irqrestore(&ha->hardware_lock, flags); res = true; @@ -740,10 +741,9 @@ static struct qla_tgt_sess *qlt_create_sess( qlt_undelete_sess(sess); kref_get(&sess->se_sess->sess_kref); - sess->s_id = fcport->d_id; - sess->loop_id = fcport->loop_id; - sess->conf_compl_supported = !!(fcport->flags & - FCF_CONF_COMP_SUPPORTED); + ha->tgt.tgt_ops->update_sess(sess, fcport->d_id, fcport->loop_id, + (fcport->flags & FCF_CONF_COMP_SUPPORTED)); + if (sess->local && !local) sess->local = 0; spin_unlock_irqrestore(&ha->hardware_lock, flags); @@ -796,8 +796,7 @@ static struct qla_tgt_sess *qlt_create_sess( */ kref_get(&sess->se_sess->sess_kref); - sess->conf_compl_supported = !!(fcport->flags & - FCF_CONF_COMP_SUPPORTED); + sess->conf_compl_supported = (fcport->flags & FCF_CONF_COMP_SUPPORTED); BUILD_BUG_ON(sizeof(sess->port_name) != sizeof(fcport->port_name)); memcpy(sess->port_name, fcport->port_name, sizeof(sess->port_name)); @@ -869,10 +868,8 @@ void qlt_fc_port_added(struct scsi_qla_host *vha, fc_port_t *fcport) ql_dbg(ql_dbg_tgt_mgt, vha, 0xf007, "Reappeared sess %p\n", sess); } - sess->s_id = fcport->d_id; - sess->loop_id = fcport->loop_id; - sess->conf_compl_supported = !!(fcport->flags & - FCF_CONF_COMP_SUPPORTED); + ha->tgt.tgt_ops->update_sess(sess, fcport->d_id, fcport->loop_id, + (fcport->flags & FCF_CONF_COMP_SUPPORTED)); } if (sess && sess->local) { diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h index 170af1571214..bad749561ec2 100644 --- a/drivers/scsi/qla2xxx/qla_target.h +++ b/drivers/scsi/qla2xxx/qla_target.h @@ -648,6 +648,7 @@ struct qla_tgt_func_tmpl { int (*check_initiator_node_acl)(struct scsi_qla_host *, unsigned char *, void *, uint8_t *, uint16_t); + void (*update_sess)(struct qla_tgt_sess *, port_id_t, uint16_t, bool); struct qla_tgt_sess *(*find_sess_by_loop_id)(struct scsi_qla_host *, const uint16_t); struct qla_tgt_sess *(*find_sess_by_s_id)(struct scsi_qla_host *, diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index d8211ccc413a..3d74f2f39ae1 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -1457,6 +1457,78 @@ static int tcm_qla2xxx_check_initiator_node_acl( return 0; } +static void tcm_qla2xxx_update_sess(struct qla_tgt_sess *sess, port_id_t s_id, + uint16_t loop_id, bool conf_compl_supported) +{ + struct qla_tgt *tgt = sess->tgt; + struct qla_hw_data *ha = tgt->ha; + struct tcm_qla2xxx_lport *lport = ha->tgt.target_lport_ptr; + struct se_node_acl *se_nacl = sess->se_sess->se_node_acl; + struct tcm_qla2xxx_nacl *nacl = container_of(se_nacl, + struct tcm_qla2xxx_nacl, se_node_acl); + u32 key; + + + if (sess->loop_id != loop_id || sess->s_id.b24 != s_id.b24) + pr_info("Updating session %p from port %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x loop_id %d -> %d s_id %x:%x:%x -> %x:%x:%x\n", + sess, + sess->port_name[0], sess->port_name[1], + sess->port_name[2], sess->port_name[3], + sess->port_name[4], sess->port_name[5], + sess->port_name[6], sess->port_name[7], + sess->loop_id, loop_id, + sess->s_id.b.domain, sess->s_id.b.area, sess->s_id.b.al_pa, + s_id.b.domain, s_id.b.area, s_id.b.al_pa); + + if (sess->loop_id != loop_id) { + /* + * Because we can shuffle loop IDs around and we + * update different sessions non-atomically, we might + * have overwritten this session's old loop ID + * already, and we might end up overwriting some other + * session that will be updated later. So we have to + * be extra careful and we can't warn about those things... + */ + if (lport->lport_loopid_map[sess->loop_id].se_nacl == se_nacl) + lport->lport_loopid_map[sess->loop_id].se_nacl = NULL; + + lport->lport_loopid_map[loop_id].se_nacl = se_nacl; + + sess->loop_id = loop_id; + } + + if (sess->s_id.b24 != s_id.b24) { + key = (((u32) sess->s_id.b.domain << 16) | + ((u32) sess->s_id.b.area << 8) | + ((u32) sess->s_id.b.al_pa)); + + if (btree_lookup32(&lport->lport_fcport_map, key)) + WARN(btree_remove32(&lport->lport_fcport_map, key) != se_nacl, + "Found wrong se_nacl when updating s_id %x:%x:%x\n", + sess->s_id.b.domain, sess->s_id.b.area, sess->s_id.b.al_pa); + else + WARN(1, "No lport_fcport_map entry for s_id %x:%x:%x\n", + sess->s_id.b.domain, sess->s_id.b.area, sess->s_id.b.al_pa); + + key = (((u32) s_id.b.domain << 16) | + ((u32) s_id.b.area << 8) | + ((u32) s_id.b.al_pa)); + + if (btree_lookup32(&lport->lport_fcport_map, key)) { + WARN(1, "Already have lport_fcport_map entry for s_id %x:%x:%x\n", + s_id.b.domain, s_id.b.area, s_id.b.al_pa); + btree_update32(&lport->lport_fcport_map, key, se_nacl); + } else { + btree_insert32(&lport->lport_fcport_map, key, se_nacl, GFP_ATOMIC); + } + + sess->s_id = s_id; + nacl->nport_id = key; + } + + sess->conf_compl_supported = conf_compl_supported; +} + /* * Calls into tcm_qla2xxx used by qla2xxx LLD I/O path. */ @@ -1467,6 +1539,7 @@ static struct qla_tgt_func_tmpl tcm_qla2xxx_template = { .free_cmd = tcm_qla2xxx_free_cmd, .free_mcmd = tcm_qla2xxx_free_mcmd, .free_session = tcm_qla2xxx_free_session, + .update_sess = tcm_qla2xxx_update_sess, .check_initiator_node_acl = tcm_qla2xxx_check_initiator_node_acl, .find_sess_by_s_id = tcm_qla2xxx_find_sess_by_s_id, .find_sess_by_loop_id = tcm_qla2xxx_find_sess_by_loop_id, -- cgit v1.2.3 From e13d5fef88c40b87c8430f8274c3a9ca32ef90bc Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 26 Oct 2012 15:35:45 -0700 Subject: target: Fix double-free of se_cmd in target_complete_tmr_failure Fabric drivers currently expect to internally release se_cmd in the event of a TMR failure during target_submit_tmr(), which means the immediate call to transport_generic_free_cmd() after TFO->queue_tm_rsp() from within target_complete_tmr_failure() workqueue context is wrong. This is done as some fabrics expect TMR operations to be acknowledged before releasing the descriptor, so the assumption that core is releasing se_cmd associated TMR memory is incorrect. This fixes a OOPs where transport_generic_free_cmd() was being called more than once. This bug was originally observed with tcm_qla2xxx fabric ports. Cc: Christoph Hellwig Cc: Roland Dreier Cc: Andy Grover Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index c33baff86aa6..9097155e9ebe 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1616,7 +1616,6 @@ static void target_complete_tmr_failure(struct work_struct *work) se_cmd->se_tmr_req->response = TMR_LUN_DOES_NOT_EXIST; se_cmd->se_tfo->queue_tm_rsp(se_cmd); - transport_generic_free_cmd(se_cmd, 0); } /** -- cgit v1.2.3 From 1a1ff38c4cebf23be8bf0009a76b082a13bd25cb Mon Sep 17 00:00:00 2001 From: Bernhard Kohl Date: Wed, 24 Oct 2012 15:53:58 +0200 Subject: target: reintroduce some obsolete SCSI-2 commands With kernel 3.6 some obsolete SCSI-2 commands including SEEK_10 have have been removed by commit 1fd032ee10d2816c947f5d5b9abda95e728f0a8f "target: move code for CDB emulation". There are still clients out there which use these old SCSI-2 commands. This mainly happens when running VMs with legacy guest systems, connected via SCSI command pass-through to iSCSI targets. Make them happy and return status GOOD. Many real SCSI disks or external iSCSI storage devices still support these old commands. So let's make LIO backward compatible as well. This patch adds support for the previously removed SEEK_10 and additionally the SEEK_6 and REZERO_UNIT commands. Signed-off-by: Bernhard Kohl Reviewed-by: Christoph Hellwig Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_sbc.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers') diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c index 868f8aa04f13..a6e27d967c7b 100644 --- a/drivers/target/target_core_sbc.c +++ b/drivers/target/target_core_sbc.c @@ -135,6 +135,12 @@ static int sbc_emulate_verify(struct se_cmd *cmd) return 0; } +static int sbc_emulate_noop(struct se_cmd *cmd) +{ + target_complete_cmd(cmd, GOOD); + return 0; +} + static inline u32 sbc_get_size(struct se_cmd *cmd, u32 sectors) { return cmd->se_dev->se_sub_dev->se_dev_attrib.block_size * sectors; @@ -531,6 +537,18 @@ int sbc_parse_cdb(struct se_cmd *cmd, struct spc_ops *ops) size = 0; cmd->execute_cmd = sbc_emulate_verify; break; + case REZERO_UNIT: + case SEEK_6: + case SEEK_10: + /* + * There are still clients out there which use these old SCSI-2 + * commands. This mainly happens when running VMs with legacy + * guest systems, connected via SCSI command pass-through to + * iSCSI targets. Make them happy and return status GOOD. + */ + size = 0; + cmd->execute_cmd = sbc_emulate_noop; + break; default: ret = spc_parse_cdb(cmd, &size); if (ret) -- cgit v1.2.3 From 7de5ae739a3786c9245af50ea0b4a363c6a0310c Mon Sep 17 00:00:00 2001 From: Shaik Ameer Basha Date: Tue, 16 Oct 2012 10:43:44 -0300 Subject: [media] exynos-gsc: change driver compatible string As G-Scaler is going to stay unchanged across all exynos5 series SoCs, changing the driver compatible string name to "samsung,exynos5-gsc" from "samsung,exynos5250-gsc". This change is as per the discussion in the devicetree forum. http://www.mail-archive.com/devicetree-discuss@lists.ozlabs.org/msg16448.html Signed-off-by: Shaik Ameer Basha Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/exynos-gsc/gsc-core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/exynos-gsc/gsc-core.c b/drivers/media/platform/exynos-gsc/gsc-core.c index bfec9e65aefb..19cbb12a12a2 100644 --- a/drivers/media/platform/exynos-gsc/gsc-core.c +++ b/drivers/media/platform/exynos-gsc/gsc-core.c @@ -965,8 +965,10 @@ static struct platform_device_id gsc_driver_ids[] = { MODULE_DEVICE_TABLE(platform, gsc_driver_ids); static const struct of_device_id exynos_gsc_match[] = { - { .compatible = "samsung,exynos5250-gsc", - .data = &gsc_v_100_drvdata, }, + { + .compatible = "samsung,exynos5-gsc", + .data = &gsc_v_100_drvdata, + }, {}, }; MODULE_DEVICE_TABLE(of, exynos_gsc_match); -- cgit v1.2.3 From c9c55d9211150b589d2d39a45cf5f96c70a51a47 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Fri, 26 Oct 2012 14:26:04 -0500 Subject: gpio/omap: fix off-mode bug: clear debounce settings on free/reset This change was originally titled "gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset". The title has been updated slightly to reflect (what should be) the final fix. When a GPIO is freed or shutdown, we need to ensure that any debounce settings are cleared and if the GPIO is the only GPIO in the bank that is currently using debounce, then disable the debounce clock as well to save power. Currently, the debounce settings are not cleared on a GPIO free or shutdown and so during a context restore on subsequent off-mode transition, the previous debounce values are restored from the shadow copies (bank->context.debounce*) leading to mismatch state between driver state and hardware state. This was discovered when board code was doing gpio_request_one() gpio_set_debounce() gpio_free() which was leaving the GPIO debounce settings in a confused state. If that GPIO bank is subsequently used with off-mode enabled, bogus state would be restored, leaving GPIO debounce enabled which then prevented the CORE powerdomain from transitioning. To fix this, introduce a new function called _clear_gpio_debounce() to clear any debounce settings when the GPIO is freed or shutdown. If this GPIO is the last debounce-enabled GPIO in the bank, the debounce will also be cut. Please note that we cannot use _gpio_dbck_disable() to disable the debounce clock because this has been specifically created for the gpio suspend path and is intended to shutdown the debounce clock while debounce is enabled. Special thanks to Kevin Hilman for root causing the bug. This fix is a collaborative effort with inputs from Kevin Hilman, Grazvydas Ignotas and Santosh Shilimkar. Testing: - This has been unit tested on an OMAP3430 Beagle board, by requesting a gpio, enabling debounce and then freeing the gpio and checking the register contents, the saved register context and the debounce clock state. - Kevin Hilman tested on 37xx/EVM board which configures GPIO debounce for the ads7846 touchscreen in its board file using the above sequence, and so was failing off-mode tests in dynamic idle. Verified that off-mode tests are passing with this patch. V5 changes: - Corrected author Reported-by: Paul Walmsley Cc: Igor Grinberg Cc: Grazvydas Ignotas Cc: Jon Hunter Signed-off-by: Jon Hunter Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Acked-by: Santosh Shilimkar Signed-off-by: Linus Walleij --- drivers/gpio/gpio-omap.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'drivers') diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 94cbc842fbc3..d335af1d4d85 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -251,6 +251,40 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, } } +/** + * _clear_gpio_debounce - clear debounce settings for a gpio + * @bank: the gpio bank we're acting upon + * @gpio: the gpio number on this @gpio + * + * If a gpio is using debounce, then clear the debounce enable bit and if + * this is the only gpio in this bank using debounce, then clear the debounce + * time too. The debounce clock will also be disabled when calling this function + * if this is the only gpio in the bank using debounce. + */ +static void _clear_gpio_debounce(struct gpio_bank *bank, unsigned gpio) +{ + u32 gpio_bit = GPIO_BIT(bank, gpio); + + if (!bank->dbck_flag) + return; + + if (!(bank->dbck_enable_mask & gpio_bit)) + return; + + bank->dbck_enable_mask &= ~gpio_bit; + bank->context.debounce_en &= ~gpio_bit; + __raw_writel(bank->context.debounce_en, + bank->base + bank->regs->debounce_en); + + if (!bank->dbck_enable_mask) { + bank->context.debounce = 0; + __raw_writel(bank->context.debounce, bank->base + + bank->regs->debounce); + clk_disable(bank->dbck); + bank->dbck_enabled = false; + } +} + static inline void set_gpio_trigger(struct gpio_bank *bank, int gpio, unsigned trigger) { @@ -539,6 +573,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio) _set_gpio_irqenable(bank, gpio, 0); _clear_gpio_irqstatus(bank, gpio); _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE); + _clear_gpio_debounce(bank, gpio); } /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ -- cgit v1.2.3 From b2da55d9441cbdaf73c12403ed801b644d5ae5e3 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sun, 28 Oct 2012 16:01:11 +0100 Subject: Regulator: core: Unregister when gpio request fails. If the gpio_request_one() fails, or returns EPROBE_DEFER, the regulator must be device_unregister()ed. When this is not done, there are WARNING: from sysfs: WARNING: at fs/sysfs/file.c:343 sysfs_open_file+0x238/0x268() Signed-off-by: Andrew Lunn Signed-off-by: Mark Brown --- drivers/regulator/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 5c4829cba6a6..aa4d28b5984e 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -3365,7 +3365,7 @@ regulator_register(const struct regulator_desc *regulator_desc, if (ret != 0) { rdev_err(rdev, "Failed to request enable GPIO%d: %d\n", config->ena_gpio, ret); - goto clean; + goto wash; } rdev->ena_gpio = config->ena_gpio; @@ -3449,6 +3449,7 @@ scrub: if (rdev->ena_gpio) gpio_free(rdev->ena_gpio); kfree(rdev->constraints); +wash: device_unregister(&rdev->dev); /* device core frees rdev */ rdev = ERR_PTR(ret); -- cgit v1.2.3 From f7e8d9f830b118cfe757140d910834afd1710001 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 28 Oct 2012 13:26:37 -0700 Subject: qlogicpti: Fix build warning. The build warns: drivers/scsi/qlogicpti.c: In function 'qpti_sbus_probe': drivers/scsi/qlogicpti.c:1316:45: warning: passing argument 1 of 'scsi_host_alloc' discards 'const' qualifier from pointer target type [enabled by default] include/scsi/scsi_host.h:778:26: note: expected 'struct scsi_host_template *' but argument is of type 'const struct scsi_host_template *' The problem is that of_device_id->data is a const void pointer. This is pretty silly in this specific instance, because for all matched device IDs we set match->data to the same value, &qpti_template. So just use that directly instead of the unnecessary and improperly typed abstraction. Signed-off-by: David S. Miller --- drivers/scsi/qlogicpti.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c index b191dd549207..71fddbc60f18 100644 --- a/drivers/scsi/qlogicpti.c +++ b/drivers/scsi/qlogicpti.c @@ -1294,26 +1294,19 @@ static struct scsi_host_template qpti_template = { static const struct of_device_id qpti_match[]; static int __devinit qpti_sbus_probe(struct platform_device *op) { - const struct of_device_id *match; - struct scsi_host_template *tpnt; struct device_node *dp = op->dev.of_node; struct Scsi_Host *host; struct qlogicpti *qpti; static int nqptis; const char *fcode; - match = of_match_device(qpti_match, &op->dev); - if (!match) - return -EINVAL; - tpnt = match->data; - /* Sometimes Antares cards come up not completely * setup, and we get a report of a zero IRQ. */ if (op->archdata.irqs[0] == 0) return -ENODEV; - host = scsi_host_alloc(tpnt, sizeof(struct qlogicpti)); + host = scsi_host_alloc(&qpti_template, sizeof(struct qlogicpti)); if (!host) return -ENOMEM; @@ -1445,19 +1438,15 @@ static int __devexit qpti_sbus_remove(struct platform_device *op) static const struct of_device_id qpti_match[] = { { .name = "ptisp", - .data = &qpti_template, }, { .name = "PTI,ptisp", - .data = &qpti_template, }, { .name = "QLGC,isp", - .data = &qpti_template, }, { .name = "SUNW,isp", - .data = &qpti_template, }, {}, }; -- cgit v1.2.3 From 31d178bffcff4c468c8c65bc42d9f4c0a7b8e3ec Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 28 Oct 2012 21:37:00 +0100 Subject: i2c-stub: Move to drivers/i2c Move the i2c-stub driver to drivers/i2c, to match the Kconfig entry. This is less confusing that way. I also fixed all checkpatch warnings and errors. Signed-off-by: Jean Delvare Cc: Peter Huewe --- drivers/i2c/Makefile | 1 + drivers/i2c/busses/Makefile | 1 - drivers/i2c/busses/i2c-stub.c | 222 ------------------------------------------ drivers/i2c/i2c-stub.c | 220 +++++++++++++++++++++++++++++++++++++++++ 4 files changed, 221 insertions(+), 223 deletions(-) delete mode 100644 drivers/i2c/busses/i2c-stub.c create mode 100644 drivers/i2c/i2c-stub.c (limited to 'drivers') diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index beee6b2d361d..1722f50f2473 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_I2C_SMBUS) += i2c-smbus.o obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o obj-$(CONFIG_I2C_MUX) += i2c-mux.o obj-y += algos/ busses/ muxes/ +obj-$(CONFIG_I2C_STUB) += i2c-stub.o ccflags-$(CONFIG_I2C_DEBUG_CORE) := -DDEBUG CFLAGS_i2c-core.o := -Wno-deprecated-declarations diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 2d33d62952c1..395b516ffa08 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -85,7 +85,6 @@ obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o -obj-$(CONFIG_I2C_STUB) += i2c-stub.o obj-$(CONFIG_SCx200_ACB) += scx200_acb.o obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o diff --git a/drivers/i2c/busses/i2c-stub.c b/drivers/i2c/busses/i2c-stub.c deleted file mode 100644 index b1b3447942c9..000000000000 --- a/drivers/i2c/busses/i2c-stub.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - i2c-stub.c - I2C/SMBus chip emulator - - Copyright (c) 2004 Mark M. Hoffman - Copyright (C) 2007 Jean Delvare - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#define DEBUG 1 - -#include -#include -#include -#include -#include -#include - -#define MAX_CHIPS 10 -#define STUB_FUNC (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | \ - I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | \ - I2C_FUNC_SMBUS_I2C_BLOCK) - -static unsigned short chip_addr[MAX_CHIPS]; -module_param_array(chip_addr, ushort, NULL, S_IRUGO); -MODULE_PARM_DESC(chip_addr, - "Chip addresses (up to 10, between 0x03 and 0x77)"); - -static unsigned long functionality = STUB_FUNC; -module_param(functionality, ulong, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(functionality, "Override functionality bitfield"); - -struct stub_chip { - u8 pointer; - u16 words[256]; /* Byte operations use the LSB as per SMBus - specification */ -}; - -static struct stub_chip *stub_chips; - -/* Return negative errno on error. */ -static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags, - char read_write, u8 command, int size, union i2c_smbus_data * data) -{ - s32 ret; - int i, len; - struct stub_chip *chip = NULL; - - /* Search for the right chip */ - for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) { - if (addr == chip_addr[i]) { - chip = stub_chips + i; - break; - } - } - if (!chip) - return -ENODEV; - - switch (size) { - - case I2C_SMBUS_QUICK: - dev_dbg(&adap->dev, "smbus quick - addr 0x%02x\n", addr); - ret = 0; - break; - - case I2C_SMBUS_BYTE: - if (read_write == I2C_SMBUS_WRITE) { - chip->pointer = command; - dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, " - "wrote 0x%02x.\n", - addr, command); - } else { - data->byte = chip->words[chip->pointer++] & 0xff; - dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, " - "read 0x%02x.\n", - addr, data->byte); - } - - ret = 0; - break; - - case I2C_SMBUS_BYTE_DATA: - if (read_write == I2C_SMBUS_WRITE) { - chip->words[command] &= 0xff00; - chip->words[command] |= data->byte; - dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, " - "wrote 0x%02x at 0x%02x.\n", - addr, data->byte, command); - } else { - data->byte = chip->words[command] & 0xff; - dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, " - "read 0x%02x at 0x%02x.\n", - addr, data->byte, command); - } - chip->pointer = command + 1; - - ret = 0; - break; - - case I2C_SMBUS_WORD_DATA: - if (read_write == I2C_SMBUS_WRITE) { - chip->words[command] = data->word; - dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, " - "wrote 0x%04x at 0x%02x.\n", - addr, data->word, command); - } else { - data->word = chip->words[command]; - dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, " - "read 0x%04x at 0x%02x.\n", - addr, data->word, command); - } - - ret = 0; - break; - - case I2C_SMBUS_I2C_BLOCK_DATA: - len = data->block[0]; - if (read_write == I2C_SMBUS_WRITE) { - for (i = 0; i < len; i++) { - chip->words[command + i] &= 0xff00; - chip->words[command + i] |= data->block[1 + i]; - } - dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, " - "wrote %d bytes at 0x%02x.\n", - addr, len, command); - } else { - for (i = 0; i < len; i++) { - data->block[1 + i] = - chip->words[command + i] & 0xff; - } - dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, " - "read %d bytes at 0x%02x.\n", - addr, len, command); - } - - ret = 0; - break; - - default: - dev_dbg(&adap->dev, "Unsupported I2C/SMBus command\n"); - ret = -EOPNOTSUPP; - break; - } /* switch (size) */ - - return ret; -} - -static u32 stub_func(struct i2c_adapter *adapter) -{ - return STUB_FUNC & functionality; -} - -static const struct i2c_algorithm smbus_algorithm = { - .functionality = stub_func, - .smbus_xfer = stub_xfer, -}; - -static struct i2c_adapter stub_adapter = { - .owner = THIS_MODULE, - .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, - .algo = &smbus_algorithm, - .name = "SMBus stub driver", -}; - -static int __init i2c_stub_init(void) -{ - int i, ret; - - if (!chip_addr[0]) { - printk(KERN_ERR "i2c-stub: Please specify a chip address\n"); - return -ENODEV; - } - - for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) { - if (chip_addr[i] < 0x03 || chip_addr[i] > 0x77) { - printk(KERN_ERR "i2c-stub: Invalid chip address " - "0x%02x\n", chip_addr[i]); - return -EINVAL; - } - - printk(KERN_INFO "i2c-stub: Virtual chip at 0x%02x\n", - chip_addr[i]); - } - - /* Allocate memory for all chips at once */ - stub_chips = kzalloc(i * sizeof(struct stub_chip), GFP_KERNEL); - if (!stub_chips) { - printk(KERN_ERR "i2c-stub: Out of memory\n"); - return -ENOMEM; - } - - ret = i2c_add_adapter(&stub_adapter); - if (ret) - kfree(stub_chips); - return ret; -} - -static void __exit i2c_stub_exit(void) -{ - i2c_del_adapter(&stub_adapter); - kfree(stub_chips); -} - -MODULE_AUTHOR("Mark M. Hoffman "); -MODULE_DESCRIPTION("I2C stub driver"); -MODULE_LICENSE("GPL"); - -module_init(i2c_stub_init); -module_exit(i2c_stub_exit); - diff --git a/drivers/i2c/i2c-stub.c b/drivers/i2c/i2c-stub.c new file mode 100644 index 000000000000..d0a9c590c3cd --- /dev/null +++ b/drivers/i2c/i2c-stub.c @@ -0,0 +1,220 @@ +/* + i2c-stub.c - I2C/SMBus chip emulator + + Copyright (c) 2004 Mark M. Hoffman + Copyright (C) 2007, 2012 Jean Delvare + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#define DEBUG 1 + +#include +#include +#include +#include +#include +#include + +#define MAX_CHIPS 10 +#define STUB_FUNC (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | \ + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | \ + I2C_FUNC_SMBUS_I2C_BLOCK) + +static unsigned short chip_addr[MAX_CHIPS]; +module_param_array(chip_addr, ushort, NULL, S_IRUGO); +MODULE_PARM_DESC(chip_addr, + "Chip addresses (up to 10, between 0x03 and 0x77)"); + +static unsigned long functionality = STUB_FUNC; +module_param(functionality, ulong, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(functionality, "Override functionality bitfield"); + +struct stub_chip { + u8 pointer; + u16 words[256]; /* Byte operations use the LSB as per SMBus + specification */ +}; + +static struct stub_chip *stub_chips; + +/* Return negative errno on error. */ +static s32 stub_xfer(struct i2c_adapter *adap, u16 addr, unsigned short flags, + char read_write, u8 command, int size, union i2c_smbus_data *data) +{ + s32 ret; + int i, len; + struct stub_chip *chip = NULL; + + /* Search for the right chip */ + for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) { + if (addr == chip_addr[i]) { + chip = stub_chips + i; + break; + } + } + if (!chip) + return -ENODEV; + + switch (size) { + + case I2C_SMBUS_QUICK: + dev_dbg(&adap->dev, "smbus quick - addr 0x%02x\n", addr); + ret = 0; + break; + + case I2C_SMBUS_BYTE: + if (read_write == I2C_SMBUS_WRITE) { + chip->pointer = command; + dev_dbg(&adap->dev, + "smbus byte - addr 0x%02x, wrote 0x%02x.\n", + addr, command); + } else { + data->byte = chip->words[chip->pointer++] & 0xff; + dev_dbg(&adap->dev, + "smbus byte - addr 0x%02x, read 0x%02x.\n", + addr, data->byte); + } + + ret = 0; + break; + + case I2C_SMBUS_BYTE_DATA: + if (read_write == I2C_SMBUS_WRITE) { + chip->words[command] &= 0xff00; + chip->words[command] |= data->byte; + dev_dbg(&adap->dev, + "smbus byte data - addr 0x%02x, wrote 0x%02x at 0x%02x.\n", + addr, data->byte, command); + } else { + data->byte = chip->words[command] & 0xff; + dev_dbg(&adap->dev, + "smbus byte data - addr 0x%02x, read 0x%02x at 0x%02x.\n", + addr, data->byte, command); + } + chip->pointer = command + 1; + + ret = 0; + break; + + case I2C_SMBUS_WORD_DATA: + if (read_write == I2C_SMBUS_WRITE) { + chip->words[command] = data->word; + dev_dbg(&adap->dev, + "smbus word data - addr 0x%02x, wrote 0x%04x at 0x%02x.\n", + addr, data->word, command); + } else { + data->word = chip->words[command]; + dev_dbg(&adap->dev, + "smbus word data - addr 0x%02x, read 0x%04x at 0x%02x.\n", + addr, data->word, command); + } + + ret = 0; + break; + + case I2C_SMBUS_I2C_BLOCK_DATA: + len = data->block[0]; + if (read_write == I2C_SMBUS_WRITE) { + for (i = 0; i < len; i++) { + chip->words[command + i] &= 0xff00; + chip->words[command + i] |= data->block[1 + i]; + } + dev_dbg(&adap->dev, + "i2c block data - addr 0x%02x, wrote %d bytes at 0x%02x.\n", + addr, len, command); + } else { + for (i = 0; i < len; i++) { + data->block[1 + i] = + chip->words[command + i] & 0xff; + } + dev_dbg(&adap->dev, + "i2c block data - addr 0x%02x, read %d bytes at 0x%02x.\n", + addr, len, command); + } + + ret = 0; + break; + + default: + dev_dbg(&adap->dev, "Unsupported I2C/SMBus command\n"); + ret = -EOPNOTSUPP; + break; + } /* switch (size) */ + + return ret; +} + +static u32 stub_func(struct i2c_adapter *adapter) +{ + return STUB_FUNC & functionality; +} + +static const struct i2c_algorithm smbus_algorithm = { + .functionality = stub_func, + .smbus_xfer = stub_xfer, +}; + +static struct i2c_adapter stub_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, + .algo = &smbus_algorithm, + .name = "SMBus stub driver", +}; + +static int __init i2c_stub_init(void) +{ + int i, ret; + + if (!chip_addr[0]) { + pr_err("i2c-stub: Please specify a chip address\n"); + return -ENODEV; + } + + for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) { + if (chip_addr[i] < 0x03 || chip_addr[i] > 0x77) { + pr_err("i2c-stub: Invalid chip address 0x%02x\n", + chip_addr[i]); + return -EINVAL; + } + + pr_info("i2c-stub: Virtual chip at 0x%02x\n", chip_addr[i]); + } + + /* Allocate memory for all chips at once */ + stub_chips = kzalloc(i * sizeof(struct stub_chip), GFP_KERNEL); + if (!stub_chips) { + pr_err("i2c-stub: Out of memory\n"); + return -ENOMEM; + } + + ret = i2c_add_adapter(&stub_adapter); + if (ret) + kfree(stub_chips); + return ret; +} + +static void __exit i2c_stub_exit(void) +{ + i2c_del_adapter(&stub_adapter); + kfree(stub_chips); +} + +MODULE_AUTHOR("Mark M. Hoffman "); +MODULE_DESCRIPTION("I2C stub driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_stub_init); +module_exit(i2c_stub_exit); -- cgit v1.2.3 From 79e3e5b894926d3c7b1efc69e0c5be723ceb88bd Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 28 Oct 2012 21:37:01 +0100 Subject: i2c-i801: Simplify dependency towards GPIOLIB Arbitrarily selecting GPIOLIB causes trouble on some architectures, so don't do that. Instead, just make the optional multiplexing code depend on CONFIG_I2C_MUX_GPIO instead of CONFIG_I2C_MUX for now. We can revisit if the i2c-i801 driver ever supports other multiplexing flavors. Also make that optional code depend on DMI, as it won't do anything without that. Signed-off-by: Jean Delvare Cc: Fengguang Wu --- drivers/i2c/busses/Kconfig | 1 - drivers/i2c/busses/i2c-i801.c | 9 ++++++--- 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 65dd599a0262..e9df4612b7eb 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -81,7 +81,6 @@ config I2C_I801 tristate "Intel 82801 (ICH/PCH)" depends on PCI select CHECK_SIGNATURE if X86 && DMI - select GPIOLIB if I2C_MUX help If you say yes to this option, support will be included for the Intel 801 family of mainboard I2C interfaces. Specifically, the following diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 37793156bd93..3bc3f7302035 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -82,7 +82,8 @@ #include #include -#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE +#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \ + defined CONFIG_DMI #include #include #include @@ -192,7 +193,8 @@ struct i801_priv { int len; u8 *data; -#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE +#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \ + defined CONFIG_DMI const struct i801_mux_config *mux_drvdata; struct platform_device *mux_pdev; #endif @@ -921,7 +923,8 @@ static void __init input_apanel_init(void) {} static void __devinit i801_probe_optional_slaves(struct i801_priv *priv) {} #endif /* CONFIG_X86 && CONFIG_DMI */ -#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE +#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \ + defined CONFIG_DMI static struct i801_mux_config i801_mux_config_asus_z8_d12 = { .gpio_chip = "gpio_ich", .values = { 0x02, 0x03 }, -- cgit v1.2.3 From 28901f579486a69cfdf7f294a3b5a97b173fb74a Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 28 Oct 2012 21:37:01 +0100 Subject: i2c-i801: Fix comment Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-i801.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 3bc3f7302035..6abc00d59881 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -1062,7 +1062,7 @@ static unsigned int __devinit i801_get_adapter_class(struct i801_priv *priv) id = dmi_first_match(mux_dmi_table); if (id) { - /* Remove from branch classes from trunk */ + /* Remove branch classes from trunk */ mux_config = id->driver_data; for (i = 0; i < mux_config->n_values; i++) class &= ~mux_config->classes[i]; -- cgit v1.2.3 From 8c6e30936a7893a85f6222084f0f26aceb81137a Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 26 Oct 2012 00:31:11 +0200 Subject: ath9k: fix stale pointers potentially causing access to free'd skbs bf->bf_next is only while buffers are chained as part of an A-MPDU in the tx queue. When a tid queue is flushed (e.g. on tearing down an aggregation session), frames can be enqueued again as normal transmission, without bf_next being cleared. This can lead to the old pointer being dereferenced again later. This patch might fix crashes and "Failed to stop TX DMA!" messages. Signed-off-by: Felix Fietkau Cc: stable@vger.kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 378bd70256b2..1ffca7511fa8 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -312,6 +312,7 @@ static struct ath_buf *ath_tx_get_buffer(struct ath_softc *sc) } bf = list_first_entry(&sc->tx.txbuf, struct ath_buf, list); + bf->bf_next = NULL; list_del(&bf->list); spin_unlock_bh(&sc->tx.txbuflock); @@ -1774,6 +1775,7 @@ static void ath_tx_send_normal(struct ath_softc *sc, struct ath_txq *txq, list_add_tail(&bf->list, &bf_head); bf->bf_state.bf_type = 0; + bf->bf_next = NULL; bf->bf_lastbf = bf; ath_tx_fill_desc(sc, bf, txq, fi->framelen); ath_tx_txqaddbuf(sc, txq, &bf_head, false); -- cgit v1.2.3 From d034fbf08b6fe86271d0d0bd332edabeb5749fd6 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Mon, 29 Oct 2012 18:50:47 +0100 Subject: hwmon, fam15h_power: Change email address, MAINTAINERS entry Signed-off-by: Andreas Herrmann Signed-off-by: Guenter Roeck --- drivers/hwmon/fam15h_power.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c index 68ad7d255512..4f4110407387 100644 --- a/drivers/hwmon/fam15h_power.c +++ b/drivers/hwmon/fam15h_power.c @@ -2,7 +2,7 @@ * fam15h_power.c - AMD Family 15h processor power monitoring * * Copyright (c) 2011 Advanced Micro Devices, Inc. - * Author: Andreas Herrmann + * Author: Andreas Herrmann * * * This driver is free software; you can redistribute it and/or @@ -28,7 +28,7 @@ #include MODULE_DESCRIPTION("AMD Family 15h CPU processor power monitor"); -MODULE_AUTHOR("Andreas Herrmann "); +MODULE_AUTHOR("Andreas Herrmann "); MODULE_LICENSE("GPL"); /* D18F3 */ -- cgit v1.2.3 From b216e12d062d060f2c7b1a49b4b6a6a442cae79c Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Mon, 29 Oct 2012 23:45:30 -0700 Subject: Input: wacom - correct bad Cintiq 24HD check Signed-off-by: Fengguang Wu Signed-off-by: Jason Gerecke Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_sys.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 2c1e12bf2ab4..858ad446de91 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -391,7 +391,7 @@ static int wacom_parse_hid(struct usb_interface *intf, features->pktlen = WACOM_PKGLEN_TPC2FG; } - if (features->type == MTSCREEN || WACOM_24HDT) + if (features->type == MTSCREEN || features->type == WACOM_24HDT) features->pktlen = WACOM_PKGLEN_MTOUCH; if (features->type == BAMBOO_PT) { -- cgit v1.2.3 From 904adede088f2a6976e417d1d5cf72c9fe686814 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Mon, 29 Oct 2012 23:45:09 -0700 Subject: Input: pxa27x_keypad - clear pending interrupts on keypad config Bootloader can leave interrupt bit pending, and it confuses driver. Signed-off-by: Vasily Khoruzhick Acked-by: Robert Jarzmik Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/pxa27x_keypad.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c index 803ff6fe021e..cad9d5dd5973 100644 --- a/drivers/input/keyboard/pxa27x_keypad.c +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -368,6 +368,9 @@ static void pxa27x_keypad_config(struct pxa27x_keypad *keypad) unsigned int mask = 0, direct_key_num = 0; unsigned long kpc = 0; + /* clear pending interrupt bit */ + keypad_readl(KPC); + /* enable matrix keys with automatic scan */ if (pdata->matrix_key_rows && pdata->matrix_key_cols) { kpc |= KPC_ASACT | KPC_MIE | KPC_ME | KPC_MS_ALL; -- cgit v1.2.3 From e07577e1ddf6d2d31961df897e7ff05c0aeb8d0f Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Mon, 29 Oct 2012 22:30:56 -0700 Subject: Input: lpc32xx-keys - select INPUT_MATRIXKMAP This adds a "select" dependency of KEYBOARD_LPC32XX on INPUT_MATRIXKMAP, as the other drivers are doing in this regard. This fixes the following compile error if KEYBOARD_LPC32XX is enabled but INPUT_MATRIXKMAP is not: drivers/input/keyboard/lpc32xx-keys.c:230: undefined reference to `matrix_keypad_build_keymap' Signed-off-by: Roland Stigge Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index b4b65af8612a..de0874054e9f 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -335,6 +335,7 @@ config KEYBOARD_LOCOMO config KEYBOARD_LPC32XX tristate "LPC32XX matrix key scanner support" depends on ARCH_LPC32XX && OF + select INPUT_MATRIXKMAP help Say Y here if you want to use NXP LPC32XX SoC key scanner interface, connected to a key matrix. -- cgit v1.2.3 From 2911758f14e36a7cd5c7367f951dcb8817552f71 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Mon, 13 Aug 2012 10:53:17 -0400 Subject: xen/blkback: Fix compile warning drivers/block/xen-blkback/xenbus.c:260:5: warning: symbol 'xenvbd_sysfs_addif' was not declared. Should it be static? drivers/block/xen-blkback/xenbus.c:284:6: warning: symbol 'xenvbd_sysfs_delif' was not declared. Should it be static? Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkback/xenbus.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index 4f66171c6683..d0fed5582a42 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -196,7 +196,7 @@ static void xen_blkif_disconnect(struct xen_blkif *blkif) } } -void xen_blkif_free(struct xen_blkif *blkif) +static void xen_blkif_free(struct xen_blkif *blkif) { if (!atomic_dec_and_test(&blkif->refcnt)) BUG(); @@ -257,7 +257,7 @@ static struct attribute_group xen_vbdstat_group = { VBD_SHOW(physical_device, "%x:%x\n", be->major, be->minor); VBD_SHOW(mode, "%s\n", be->mode); -int xenvbd_sysfs_addif(struct xenbus_device *dev) +static int xenvbd_sysfs_addif(struct xenbus_device *dev) { int error; @@ -281,7 +281,7 @@ fail1: device_remove_file(&dev->dev, &dev_attr_physical_device); return error; } -void xenvbd_sysfs_delif(struct xenbus_device *dev) +static void xenvbd_sysfs_delif(struct xenbus_device *dev) { sysfs_remove_group(&dev->dev.kobj, &xen_vbdstat_group); device_remove_file(&dev->dev, &dev_attr_mode); -- cgit v1.2.3 From b54e1f88897bcacc2cd359f48ea3b39eaf55f084 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Mon, 27 Aug 2012 20:56:51 -0300 Subject: floppy: don't call alloc_ordered_workqueue inside the alloc_disk loop Since commit 070ad7e ("floppy: convert to delayed work and single-thread wq"), we end up calling alloc_ordered_workqueue multiple times inside the loop, which shouldn't be intended. Besides the leak, other side effect in the current code is if blk_init_queue fails, we would end up calling unregister_blkdev even if we didn't call yet register_blkdev. Just moved the allocation of floppy_wq before the loop, and adjusted the code accordingly. Cc: stable@vger.kernel.org # 3.5+ Acked-by: Vivek Goyal Reviewed-by: Ben Hutchings Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Jiri Kosina Signed-off-by: Jens Axboe --- drivers/block/floppy.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 17c675c52295..83112f08a41d 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4137,6 +4137,10 @@ static int __init do_floppy_init(void) raw_cmd = NULL; + floppy_wq = alloc_ordered_workqueue("floppy", 0); + if (!floppy_wq) + return -ENOMEM; + for (dr = 0; dr < N_DRIVE; dr++) { disks[dr] = alloc_disk(1); if (!disks[dr]) { @@ -4144,16 +4148,10 @@ static int __init do_floppy_init(void) goto out_put_disk; } - floppy_wq = alloc_ordered_workqueue("floppy", 0); - if (!floppy_wq) { - err = -ENOMEM; - goto out_put_disk; - } - disks[dr]->queue = blk_init_queue(do_fd_request, &floppy_lock); if (!disks[dr]->queue) { err = -ENOMEM; - goto out_destroy_workq; + goto out_put_disk; } blk_queue_max_hw_sectors(disks[dr]->queue, 64); @@ -4317,8 +4315,6 @@ out_release_dma: out_unreg_region: blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256); platform_driver_unregister(&floppy_driver); -out_destroy_workq: - destroy_workqueue(floppy_wq); out_unreg_blkdev: unregister_blkdev(FLOPPY_MAJOR, "fd"); out_put_disk: @@ -4334,6 +4330,7 @@ out_put_disk: } put_disk(disks[dr]); } + destroy_workqueue(floppy_wq); return err; } -- cgit v1.2.3 From 238ab78469c6ab7845b43d5061cd3c92331b2452 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Mon, 27 Aug 2012 20:56:52 -0300 Subject: floppy: do put_disk on current dr if blk_init_queue fails If blk_init_queue fails, we do not call put_disk on the current dr (dr is decremented first in the error handling loop). Cc: stable@vger.kernel.org Reviewed-by: Ben Hutchings Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Jiri Kosina Signed-off-by: Jens Axboe --- drivers/block/floppy.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 83112f08a41d..9a558b63e78f 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4150,6 +4150,7 @@ static int __init do_floppy_init(void) disks[dr]->queue = blk_init_queue(do_fd_request, &floppy_lock); if (!disks[dr]->queue) { + put_disk(disks[dr]); err = -ENOMEM; goto out_put_disk; } -- cgit v1.2.3 From d60e7ec18c3fb2cbf90969ccd42889eb2d03aef9 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Mon, 27 Aug 2012 20:56:54 -0300 Subject: floppy: properly handle failure on add_disk loop On floppy initialization, if something failed inside the loop we call add_disk, there was no cleanup of previous iterations in the error handling. Cc: stable@vger.kernel.org Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Jiri Kosina Signed-off-by: Jens Axboe --- drivers/block/floppy.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 9a558b63e78f..2c7257334b64 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4292,7 +4292,7 @@ static int __init do_floppy_init(void) err = platform_device_register(&floppy_device[drive]); if (err) - goto out_release_dma; + goto out_remove_drives; err = device_create_file(&floppy_device[drive].dev, &dev_attr_cmos); @@ -4310,6 +4310,15 @@ static int __init do_floppy_init(void) out_unreg_platform_dev: platform_device_unregister(&floppy_device[drive]); +out_remove_drives: + while (drive--) { + if ((allowed_drive_mask & (1 << drive)) && + fdc_state[FDC(drive)].version != FDC_NONE) { + del_gendisk(disks[drive]); + device_remove_file(&floppy_device[drive].dev, &dev_attr_cmos); + platform_device_unregister(&floppy_device[drive]); + } + } out_release_dma: if (atomic_read(&usage_count)) floppy_release_irq_and_dma(); -- cgit v1.2.3 From 8d3ab4ebfd7435bc248873de47d0ca23076c4973 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Mon, 27 Aug 2012 20:56:55 -0300 Subject: floppy: use common function to check if floppies can be registered The same checks to see if a drive can be or is registered are repeated through the code, factor out the checks in a common function and replace the repeated checks with it. Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Jiri Kosina Signed-off-by: Jens Axboe --- drivers/block/floppy.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 2c7257334b64..d54b234a1a67 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4109,12 +4109,19 @@ static struct platform_driver floppy_driver = { static struct platform_device floppy_device[N_DRIVE]; +static bool floppy_available(int drive) +{ + if (!(allowed_drive_mask & (1 << drive))) + return false; + if (fdc_state[FDC(drive)].version == FDC_NONE) + return false; + return true; +} + static struct kobject *floppy_find(dev_t dev, int *part, void *data) { int drive = (*part & 3) | ((*part & 0x80) >> 5); - if (drive >= N_DRIVE || - !(allowed_drive_mask & (1 << drive)) || - fdc_state[FDC(drive)].version == FDC_NONE) + if (drive >= N_DRIVE || !floppy_available(drive)) return NULL; if (((*part >> 2) & 0x1f) >= ARRAY_SIZE(floppy_type)) return NULL; @@ -4281,9 +4288,7 @@ static int __init do_floppy_init(void) } for (drive = 0; drive < N_DRIVE; drive++) { - if (!(allowed_drive_mask & (1 << drive))) - continue; - if (fdc_state[FDC(drive)].version == FDC_NONE) + if (!floppy_available(drive)) continue; floppy_device[drive].name = floppy_device_name; @@ -4312,8 +4317,7 @@ out_unreg_platform_dev: platform_device_unregister(&floppy_device[drive]); out_remove_drives: while (drive--) { - if ((allowed_drive_mask & (1 << drive)) && - fdc_state[FDC(drive)].version != FDC_NONE) { + if (floppy_available(drive)) { del_gendisk(disks[drive]); device_remove_file(&floppy_device[drive].dev, &dev_attr_cmos); platform_device_unregister(&floppy_device[drive]); @@ -4558,8 +4562,7 @@ static void __exit floppy_module_exit(void) for (drive = 0; drive < N_DRIVE; drive++) { del_timer_sync(&motor_off_timer[drive]); - if ((allowed_drive_mask & (1 << drive)) && - fdc_state[FDC(drive)].version != FDC_NONE) { + if (floppy_available(drive)) { del_gendisk(disks[drive]); device_remove_file(&floppy_device[drive].dev, &dev_attr_cmos); platform_device_unregister(&floppy_device[drive]); -- cgit v1.2.3 From 1a4ae43e4feb570901667782678772fd31c1b125 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Tue, 30 Oct 2012 08:36:07 +0100 Subject: floppy: remove dr, reuse drive on do_floppy_init This is a small cleanup, that also may turn error handling of unitialized disks more readable. We don't need a separate variable to track allocated disks, remove dr and reuse drive variable instead. Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Jiri Kosina Signed-off-by: Jens Axboe --- drivers/block/floppy.c | 48 ++++++++++++++++++++++-------------------------- 1 file changed, 22 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index d54b234a1a67..1c49d7173966 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4131,8 +4131,7 @@ static struct kobject *floppy_find(dev_t dev, int *part, void *data) static int __init do_floppy_init(void) { - int i, unit, drive; - int err, dr; + int i, unit, drive, err; set_debugt(); interruptjiffies = resultjiffies = jiffies; @@ -4148,29 +4147,28 @@ static int __init do_floppy_init(void) if (!floppy_wq) return -ENOMEM; - for (dr = 0; dr < N_DRIVE; dr++) { - disks[dr] = alloc_disk(1); - if (!disks[dr]) { + for (drive = 0; drive < N_DRIVE; drive++) { + disks[drive] = alloc_disk(1); + if (!disks[drive]) { err = -ENOMEM; goto out_put_disk; } - disks[dr]->queue = blk_init_queue(do_fd_request, &floppy_lock); - if (!disks[dr]->queue) { - put_disk(disks[dr]); + disks[drive]->queue = blk_init_queue(do_fd_request, &floppy_lock); + if (!disks[drive]->queue) { err = -ENOMEM; goto out_put_disk; } - blk_queue_max_hw_sectors(disks[dr]->queue, 64); - disks[dr]->major = FLOPPY_MAJOR; - disks[dr]->first_minor = TOMINOR(dr); - disks[dr]->fops = &floppy_fops; - sprintf(disks[dr]->disk_name, "fd%d", dr); + blk_queue_max_hw_sectors(disks[drive]->queue, 64); + disks[drive]->major = FLOPPY_MAJOR; + disks[drive]->first_minor = TOMINOR(drive); + disks[drive]->fops = &floppy_fops; + sprintf(disks[drive]->disk_name, "fd%d", drive); - init_timer(&motor_off_timer[dr]); - motor_off_timer[dr].data = dr; - motor_off_timer[dr].function = motor_off_callback; + init_timer(&motor_off_timer[drive]); + motor_off_timer[drive].data = drive; + motor_off_timer[drive].function = motor_off_callback; } err = register_blkdev(FLOPPY_MAJOR, "fd"); @@ -4332,17 +4330,15 @@ out_unreg_region: out_unreg_blkdev: unregister_blkdev(FLOPPY_MAJOR, "fd"); out_put_disk: - while (dr--) { - del_timer_sync(&motor_off_timer[dr]); - if (disks[dr]->queue) { - blk_cleanup_queue(disks[dr]->queue); - /* - * put_disk() is not paired with add_disk() and - * will put queue reference one extra time. fix it. - */ - disks[dr]->queue = NULL; + for (drive = 0; drive < N_DRIVE; drive++) { + if (!disks[drive]) + break; + if (disks[drive]->queue) { + del_timer_sync(&motor_off_timer[drive]); + blk_cleanup_queue(disks[drive]->queue); + disks[drive]->queue = NULL; } - put_disk(disks[dr]); + put_disk(disks[drive]); } destroy_workqueue(floppy_wq); return err; -- cgit v1.2.3 From 654dbef2146d6bc56886495d44b661148f016e62 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 27 Aug 2012 12:28:57 +0800 Subject: xen/blkback: use kmem_cache_zalloc instead of kmem_cache_alloc/memset Using kmem_cache_zalloc() instead of kmem_cache_alloc() and memset(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkback/xenbus.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index d0fed5582a42..f58434c2617c 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -105,11 +105,10 @@ static struct xen_blkif *xen_blkif_alloc(domid_t domid) { struct xen_blkif *blkif; - blkif = kmem_cache_alloc(xen_blkif_cachep, GFP_KERNEL); + blkif = kmem_cache_zalloc(xen_blkif_cachep, GFP_KERNEL); if (!blkif) return ERR_PTR(-ENOMEM); - memset(blkif, 0, sizeof(*blkif)); blkif->domid = domid; spin_lock_init(&blkif->blk_ring_lock); atomic_set(&blkif->refcnt, 1); -- cgit v1.2.3 From 2541aa799ff711fdd85dfbced58ea815a5968674 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 9 Sep 2012 12:40:50 +0200 Subject: cciss: remove unneeded memset() The memory return by kzalloc() or kmem_cache_zalloc() has already be set to zero, so remove useless memset(0). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun Cc: Mike Miller Cc: Jens Axboe Cc: Stephen M. Cameron Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index b0f553b26d0f..ca83f96756ad 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -5205,7 +5205,6 @@ static void cciss_shutdown(struct pci_dev *pdev) return; } /* write all data in the battery backed cache to disk */ - memset(flush_buf, 0, 4); return_code = sendcmd_withirq(h, CCISS_CACHE_FLUSH, flush_buf, 4, 0, CTLR_LUNID, TYPE_CMD); kfree(flush_buf); -- cgit v1.2.3 From b7010ede4342d3ab9f9a0c51c1aa50139aacadaf Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 9 Sep 2012 12:47:47 +0200 Subject: cciss: select CONFIG_CHECK_SIGNATURE The patch cciss-use-check_signature.patch in -mm tree introduced a build error: drivers/built-in.o: In function `CISS_signature_present': drivers/block/cciss.c:4270: undefined reference to `check_signature' Add missing CONFIG_CHECK_SIGNATURE to fix this issue. Reported-by: Fengguang Wu Signed-off-by: Akinobu Mita Cc: Fengguang Wu Cc: Mike Miller Cc: Jens Axboe Acked-by: "Stephen M. Cameron" Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 6983a65c8df3..824e09c4d0d7 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -131,6 +131,7 @@ config BLK_CPQ_DA config BLK_CPQ_CISS_DA tristate "Compaq Smart Array 5xxx support" depends on PCI + select CHECK_SIGNATURE help This is the driver for Compaq Smart Array 5xxx controllers. Everyone using these boards should say Y here. -- cgit v1.2.3 From 1f999572f244f266c5b1b855025723541b0b475d Mon Sep 17 00:00:00 2001 From: Oliver Chick Date: Fri, 21 Sep 2012 10:04:18 +0100 Subject: xen/blkback: Change xen_vbd's flush_support and discard_secure to have type unsigned int, rather than bool Changing the type of bdev parameters to be unsigned int :1, rather than bool. This is more consistent with the types of other features in the block drivers. Signed-off-by: Oliver Chick Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Jens Axboe --- drivers/block/xen-blkback/common.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h index 9ad3b5ec1dc1..9a54623e52d7 100644 --- a/drivers/block/xen-blkback/common.h +++ b/drivers/block/xen-blkback/common.h @@ -158,8 +158,8 @@ struct xen_vbd { struct block_device *bdev; /* Cached size parameter. */ sector_t size; - bool flush_support; - bool discard_secure; + unsigned int flush_support:1; + unsigned int discard_secure:1; }; struct backend_info; -- cgit v1.2.3 From 4453bc88f0f7be6d84b50b2e1c1ed239c45fb14a Mon Sep 17 00:00:00 2001 From: Selvan Mani Date: Thu, 27 Sep 2012 14:36:43 +0200 Subject: mtip32xx:Added appropriate timeout value for secure erase Added appropriate timeout value for secure erase based on identify device data Signed-off-by: Asai Thambi S P Signed-off-by: Selvan Mani Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 19 +++++++++++++++---- drivers/block/mtip32xx/mtip32xx.h | 3 +++ 2 files changed, 18 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index f946d31d6917..adc6f36564cf 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -2035,8 +2035,9 @@ static unsigned int implicit_sector(unsigned char command, } return rv; } - -static void mtip_set_timeout(struct host_to_dev_fis *fis, unsigned int *timeout) +static void mtip_set_timeout(struct driver_data *dd, + struct host_to_dev_fis *fis, + unsigned int *timeout, u8 erasemode) { switch (fis->command) { case ATA_CMD_DOWNLOAD_MICRO: @@ -2044,7 +2045,10 @@ static void mtip_set_timeout(struct host_to_dev_fis *fis, unsigned int *timeout) break; case ATA_CMD_SEC_ERASE_UNIT: case 0xFC: - *timeout = 240000; /* 4 minutes */ + if (erasemode) + *timeout = ((*(dd->port->identify + 90) * 2) * 60000); + else + *timeout = ((*(dd->port->identify + 89) * 2) * 60000); break; case ATA_CMD_STANDBYNOW1: *timeout = 120000; /* 2 minutes */ @@ -2087,6 +2091,7 @@ static int exec_drive_taskfile(struct driver_data *dd, unsigned int transfer_size; unsigned long task_file_data; int intotal = outtotal + req_task->out_size; + int erasemode = 0; taskout = req_task->out_size; taskin = req_task->in_size; @@ -2212,7 +2217,13 @@ static int exec_drive_taskfile(struct driver_data *dd, fis.lba_hi, fis.device); - mtip_set_timeout(&fis, &timeout); + /* check for erase mode support during secure erase.*/ + if ((fis.command == ATA_CMD_SEC_ERASE_UNIT) + && (outbuf[0] & MTIP_SEC_ERASE_MODE)) { + erasemode = 1; + } + + mtip_set_timeout(dd, &fis, &timeout, erasemode); /* Determine the correct transfer size.*/ if (force_single_sector) diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h index 18627a1d04c5..5f4a917bd8bb 100644 --- a/drivers/block/mtip32xx/mtip32xx.h +++ b/drivers/block/mtip32xx/mtip32xx.h @@ -33,6 +33,9 @@ /* offset of Device Control register in PCIe extended capabilites space */ #define PCIE_CONFIG_EXT_DEVICE_CONTROL_OFFSET 0x48 +/* check for erase mode support during secure erase */ +#define MTIP_SEC_ERASE_MODE 0x3 + /* # of times to retry timed out/failed IOs */ #define MTIP_MAX_RETRIES 2 -- cgit v1.2.3 From a1ecac3b0656a68259927c234e505804d33a7b83 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Fri, 28 Sep 2012 10:42:23 +0200 Subject: loop: Make explicit loop device destruction lazy xfstests has always had random failures of tests due to loop devices failing to be torn down and hence leaving filesytems that cannot be unmounted. This causes test runs to immediately stop. Over the past 6 or 7 years we've added hacks like explicit unmount -d commands for loop mounts, losetup -d after unmount -d fails, etc, but still the problems persist. Recently, the frequency of loop related failures increased again to the point that xfstests 259 will reliably fail with a stray loop device that was not torn down. That is despite the fact the test is above as simple as it gets - loop 5 or 6 times running mkfs.xfs with different paramters: lofile=$(losetup -f) losetup $lofile "$testfile" "$MKFS_XFS_PROG" -b size=512 $lofile >/dev/null || echo "mkfs failed!" sync losetup -d $lofile And losteup -d $lofile is failing with EBUSY on 1-3 of these loops every time the test is run. Turns out that blkid is running simultaneously with losetup -d, and so it sees an elevated reference count and returns EBUSY. But why is blkid running? It's obvious, isn't it? udev has decided to try and find out what is on the block device as a result of a creation notification. And it is racing with mkfs, so might still be scanning the device when mkfs finishes and we try to tear it down. So, make losetup -d force autoremove behaviour. That is, when the last reference goes away, tear down the device. xfstests wants it *gone*, not causing random teardown failures when we know that all the operations the tests have specifically run on the device have completed and are no longer referencing the loop device. Signed-off-by: Dave Chinner Signed-off-by: Jens Axboe --- drivers/block/loop.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/block/loop.c b/drivers/block/loop.c index e9d594fd12cb..54046e51160a 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -976,8 +976,21 @@ static int loop_clr_fd(struct loop_device *lo) if (lo->lo_state != Lo_bound) return -ENXIO; - if (lo->lo_refcnt > 1) /* we needed one fd for the ioctl */ - return -EBUSY; + /* + * If we've explicitly asked to tear down the loop device, + * and it has an elevated reference count, set it for auto-teardown when + * the last reference goes away. This stops $!~#$@ udev from + * preventing teardown because it decided that it needs to run blkid on + * the loopback device whenever they appear. xfstests is notorious for + * failing tests because blkid via udev races with a losetup + * /do something like mkfs/losetup -d causing the losetup -d + * command to fail with EBUSY. + */ + if (lo->lo_refcnt > 1) { + lo->lo_flags |= LO_FLAGS_AUTOCLEAR; + mutex_unlock(&lo->lo_ctl_mutex); + return 0; + } if (filp == NULL) return -EINVAL; -- cgit v1.2.3 From 43aff26ce1684dae4bf75437b2733371106aa767 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Mon, 29 Oct 2012 18:40:09 +0100 Subject: EDAC: Change Boris' email address My @amd.com address will be invalid soon so move to private email address. Signed-off-by: Borislav Petkov Link: http://lkml.kernel.org/r/1351532410-4887-2-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar --- drivers/edac/amd64_edac.h | 2 +- drivers/edac/edac_stub.c | 2 +- drivers/edac/mce_amd_inj.c | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h index 8d4804732bac..8c4139647efc 100644 --- a/drivers/edac/amd64_edac.h +++ b/drivers/edac/amd64_edac.h @@ -33,7 +33,7 @@ * detection. The mods to Rev F required more family * information detection. * - * Changes/Fixes by Borislav Petkov : + * Changes/Fixes by Borislav Petkov : * - misc fixes and code cleanups * * This module is based on the following documents diff --git a/drivers/edac/edac_stub.c b/drivers/edac/edac_stub.c index 6c86f6e54558..351945fa2ecd 100644 --- a/drivers/edac/edac_stub.c +++ b/drivers/edac/edac_stub.c @@ -5,7 +5,7 @@ * * 2007 (c) MontaVista Software, Inc. * 2010 (c) Advanced Micro Devices Inc. - * Borislav Petkov + * Borislav Petkov * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/edac/mce_amd_inj.c b/drivers/edac/mce_amd_inj.c index 66b5151c1080..2ae78f20cc28 100644 --- a/drivers/edac/mce_amd_inj.c +++ b/drivers/edac/mce_amd_inj.c @@ -6,7 +6,7 @@ * This file may be distributed under the terms of the GNU General Public * License version 2. * - * Copyright (c) 2010: Borislav Petkov + * Copyright (c) 2010: Borislav Petkov * Advanced Micro Devices Inc. */ @@ -168,6 +168,6 @@ module_init(edac_init_mce_inject); module_exit(edac_exit_mce_inject); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Borislav Petkov "); +MODULE_AUTHOR("Borislav Petkov "); MODULE_AUTHOR("AMD Inc."); MODULE_DESCRIPTION("MCE injection facility for testing MCE decoding"); -- cgit v1.2.3 From f6bc8c29383456b89ac1b6f1aa768d195670fb53 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 29 Oct 2012 16:44:46 +0200 Subject: usb: otg: Fix build errors if USB_MUSB_OMAP2PLUS is selected as module TWL4030_USB & TWL6030_USB must depend on USB_MUSB_OMAP2PLUS in Kconfig else we get build errors with CONFIG_USB_MUSB_HDRC=m CONFIG_USB_MUSB_OMAP2PLUS=m CONFIG_TWL4030_USB=y CONFIG_TWL6030_USB=y LD init/built-in.o drivers/built-in.o: In function `twl4030_usb_irq': drivers/usb/otg/twl4030-usb.c:518: undefined reference to `omap_musb_mailbox' drivers/built-in.o: In function `twl4030_usb_phy_init': drivers/usb/otg/twl4030-usb.c:540: undefined reference to `omap_musb_mailbox' drivers/built-in.o: In function `twl6030_usb_irq': drivers/usb/otg/twl6030-usb.c:230: undefined reference to `omap_musb_mailbox' drivers/usb/otg/twl6030-usb.c:225: undefined reference to `omap_musb_mailbox' drivers/built-in.o: In function `twl6030_usbotg_irq': drivers/usb/otg/twl6030-usb.c:259: undefined reference to `omap_musb_mailbox' CC: Peter Meerwald Signed-off-by: Roger Quadros Signed-off-by: Felipe Balbi --- drivers/usb/otg/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index d8c8a42bff3e..6223062d5d1b 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -58,7 +58,7 @@ config USB_ULPI_VIEWPORT config TWL4030_USB tristate "TWL4030 USB Transceiver Driver" - depends on TWL4030_CORE && REGULATOR_TWL4030 + depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS select USB_OTG_UTILS help Enable this to support the USB OTG transceiver on TWL4030 @@ -68,7 +68,7 @@ config TWL4030_USB config TWL6030_USB tristate "TWL6030 USB Transceiver Driver" - depends on TWL4030_CORE && OMAP_USB2 + depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS select USB_OTG_UTILS help Enable this to support the USB OTG transceiver on TWL6030 -- cgit v1.2.3 From a67baeb77375199bbd842fa308cb565164dd1f19 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Wed, 24 Oct 2012 12:39:02 +0100 Subject: xen/gntdev: don't leak memory from IOCTL_GNTDEV_MAP_GRANT_REF map->kmap_ops allocated in gntdev_alloc_map() wasn't freed by gntdev_put_map(). Add a gntdev_free_map() helper function to free everything allocated by gntdev_alloc_map(). Signed-off-by: David Vrabel Cc: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/gntdev.c | 36 +++++++++++++++++++----------------- 1 file changed, 19 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index 610bfc6be177..2e22df2f7a3f 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -105,6 +105,21 @@ static void gntdev_print_maps(struct gntdev_priv *priv, #endif } +static void gntdev_free_map(struct grant_map *map) +{ + if (map == NULL) + return; + + if (map->pages) + free_xenballooned_pages(map->count, map->pages); + kfree(map->pages); + kfree(map->grants); + kfree(map->map_ops); + kfree(map->unmap_ops); + kfree(map->kmap_ops); + kfree(map); +} + static struct grant_map *gntdev_alloc_map(struct gntdev_priv *priv, int count) { struct grant_map *add; @@ -142,12 +157,7 @@ static struct grant_map *gntdev_alloc_map(struct gntdev_priv *priv, int count) return add; err: - kfree(add->pages); - kfree(add->grants); - kfree(add->map_ops); - kfree(add->unmap_ops); - kfree(add->kmap_ops); - kfree(add); + gntdev_free_map(add); return NULL; } @@ -198,17 +208,9 @@ static void gntdev_put_map(struct grant_map *map) evtchn_put(map->notify.event); } - if (map->pages) { - if (!use_ptemod) - unmap_grant_pages(map, 0, map->count); - - free_xenballooned_pages(map->count, map->pages); - } - kfree(map->pages); - kfree(map->grants); - kfree(map->map_ops); - kfree(map->unmap_ops); - kfree(map); + if (map->pages && !use_ptemod) + unmap_grant_pages(map, 0, map->count); + gntdev_free_map(map); } /* ------------------------------------------------------------------ */ -- cgit v1.2.3 From 01bc825f6311ba2878ae353418eee575d3051594 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Thu, 18 Oct 2012 11:03:37 +0100 Subject: xen-fbfront: handle backend CLOSED without CLOSING Backend drivers shouldn't transistion to CLOSED unless the frontend is CLOSED. If a backend does transition to CLOSED too soon then the frontend may not see the CLOSING state and will not properly shutdown. So, treat an unexpected backend CLOSED state the same as CLOSING. Acked-by: Florian Tobias Schandinat Signed-off-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk --- drivers/video/xen-fbfront.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c index b7f5173ff9e9..917bb5681684 100644 --- a/drivers/video/xen-fbfront.c +++ b/drivers/video/xen-fbfront.c @@ -641,7 +641,6 @@ static void xenfb_backend_changed(struct xenbus_device *dev, case XenbusStateReconfiguring: case XenbusStateReconfigured: case XenbusStateUnknown: - case XenbusStateClosed: break; case XenbusStateInitWait: @@ -670,6 +669,10 @@ InitWait: info->feature_resize = val; break; + case XenbusStateClosed: + if (dev->state == XenbusStateClosed) + break; + /* Missed the backend's CLOSING state -- fallthrough */ case XenbusStateClosing: xenbus_frontend_closed(dev); break; -- cgit v1.2.3 From 2ebb939ab9c6a2484866c5eae4184c83c2b21af8 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Thu, 18 Oct 2012 11:03:38 +0100 Subject: xen-kbdfront: handle backend CLOSED without CLOSING Backend drivers shouldn't transistion to CLOSED unless the frontend is CLOSED. If a backend does transition to CLOSED too soon then the frontend may not see the CLOSING state and will not properly shutdown. So, treat an unexpected backend CLOSED state the same as CLOSING. Acked-by: Dmitry Torokhov Signed-off-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk --- drivers/input/misc/xen-kbdfront.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/misc/xen-kbdfront.c b/drivers/input/misc/xen-kbdfront.c index 02ca8680ea5b..6f7d99013031 100644 --- a/drivers/input/misc/xen-kbdfront.c +++ b/drivers/input/misc/xen-kbdfront.c @@ -311,7 +311,6 @@ static void xenkbd_backend_changed(struct xenbus_device *dev, case XenbusStateReconfiguring: case XenbusStateReconfigured: case XenbusStateUnknown: - case XenbusStateClosed: break; case XenbusStateInitWait: @@ -350,6 +349,10 @@ InitWait: break; + case XenbusStateClosed: + if (dev->state == XenbusStateClosed) + break; + /* Missed the backend's CLOSING state -- fallthrough */ case XenbusStateClosing: xenbus_frontend_closed(dev); break; -- cgit v1.2.3 From 1bcaba51eba549748917f7d6eb41900ff9ee3d5f Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 17 Oct 2012 13:14:09 -0400 Subject: xen/xenbus: fix overflow check in xenbus_file_write() Acked-by: Ian Campbell Reported-by: Dan Carpenter Signed-off-by: Jan Beulich [v1: Rebased on upstream] Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xenbus/xenbus_dev_frontend.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/xen/xenbus/xenbus_dev_frontend.c b/drivers/xen/xenbus/xenbus_dev_frontend.c index 89f76252a16f..ac727028e658 100644 --- a/drivers/xen/xenbus/xenbus_dev_frontend.c +++ b/drivers/xen/xenbus/xenbus_dev_frontend.c @@ -458,7 +458,7 @@ static ssize_t xenbus_file_write(struct file *filp, goto out; /* Can't write a xenbus message larger we can buffer */ - if ((len + u->len) > sizeof(u->u.buffer)) { + if (len > sizeof(u->u.buffer) - u->len) { /* On error, dump existing buffer */ u->len = 0; rc = -EINVAL; -- cgit v1.2.3 From 8e493ca1767d4951ed1322abaa74d6edbca29918 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 26 Oct 2012 18:44:20 +0200 Subject: USB: usb_wwan: fix bulk-urb allocation Make sure we do not allocate urbs if we do not have a bulk endpoint. Legacy code used incorrect assumption to test for bulk endpoints. Reported-by: Dan Carpenter Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb_wwan.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 61a73ad1a187..a3e9c095f0d8 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -455,9 +455,6 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port, struct usb_serial *serial = port->serial; struct urb *urb; - if (endpoint == -1) - return NULL; /* endpoint not needed */ - urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ if (urb == NULL) { dev_dbg(&serial->interface->dev, @@ -489,6 +486,9 @@ int usb_wwan_port_probe(struct usb_serial_port *port) init_usb_anchor(&portdata->delayed); for (i = 0; i < N_IN_URB; i++) { + if (!port->bulk_in_size) + break; + buffer = (u8 *)__get_free_page(GFP_KERNEL); if (!buffer) goto bail_out_error; @@ -502,8 +502,8 @@ int usb_wwan_port_probe(struct usb_serial_port *port) } for (i = 0; i < N_OUT_URB; i++) { - if (port->bulk_out_endpointAddress == -1) - continue; + if (!port->bulk_out_size) + break; buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL); if (!buffer) -- cgit v1.2.3 From bf7e1abe434ba9e22e8dc04a4cba4ab504b788b8 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 25 Oct 2012 09:51:39 +0200 Subject: rt2800: validate step value for temperature compensation Some hardware has correct (!= 0xff) value of tssi_bounds[4] in the EEPROM, but step is equal to 0xff. This results on ridiculous delta calculations and completely broke TX power settings. Reported-and-tested-by: Pavel Lucik Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 01dc8891070c..59474ae0aec0 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -2449,7 +2449,7 @@ static int rt2800_get_gain_calibration_delta(struct rt2x00_dev *rt2x00dev) /* * Check if temperature compensation is supported. */ - if (tssi_bounds[4] == 0xff) + if (tssi_bounds[4] == 0xff || step == 0xff) return 0; /* -- cgit v1.2.3 From 6fe7cc71bbf3a0bc28c9cec3c00bc11e81344412 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Mon, 29 Oct 2012 13:25:20 +0100 Subject: ath9k: Test for TID only in BlockAcks while checking tx status The ath9k xmit functions for AMPDUs can send frames as non-aggregate in case only one frame is currently available. The client will then answer using a normal Ack instead of a BlockAck. This acknowledgement has no TID stored and therefore the hardware is not able to provide us the corresponding TID. The TID set by the hardware in the tx status descriptor has to be seen as undefined and not as a valid TID value for normal acknowledgements. Doing otherwise results in a massive amount of retransmissions and stalls of connections. Users may experience low bandwidth and complete connection stalls in environments with transfers using multiple TIDs. This regression was introduced in b11b160defc48e4daa283f785192ea3a23a51f8e ("ath9k: validate the TID in the tx status information"). Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich Cc: stable@vger.kernel.org Acked-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 1ffca7511fa8..741918a2027b 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -394,7 +394,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, u16 seq_st = 0, acked_cnt = 0, txfail_cnt = 0, seq_first; u32 ba[WME_BA_BMP_SIZE >> 5]; int isaggr, txfail, txpending, sendbar = 0, needreset = 0, nbad = 0; - bool rc_update = true; + bool rc_update = true, isba; struct ieee80211_tx_rate rates[4]; struct ath_frame_info *fi; int nframes; @@ -438,13 +438,17 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, tidno = ieee80211_get_qos_ctl(hdr)[0] & IEEE80211_QOS_CTL_TID_MASK; tid = ATH_AN_2_TID(an, tidno); seq_first = tid->seq_start; + isba = ts->ts_flags & ATH9K_TX_BA; /* * The hardware occasionally sends a tx status for the wrong TID. * In this case, the BA status cannot be considered valid and all * subframes need to be retransmitted + * + * Only BlockAcks have a TID and therefore normal Acks cannot be + * checked */ - if (tidno != ts->tid) + if (isba && tidno != ts->tid) txok = false; isaggr = bf_isaggr(bf); -- cgit v1.2.3 From d99e65bda806f49e192dd31e9b01959974dea3cd Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 29 Oct 2012 16:45:54 +0000 Subject: USB: fix build with XEN and EARLY_PRINTK_DBGP enabled but USB_SUPPORT disabled Since there's no possible caller of dbgp_external_startup() and dbgp_reset_prep() when !USB_EHCI_HCD, there's no point in building and exporting these functions in that case. This eliminates a build error under the conditions listed in the subject, introduced with the merge f1c6872e4980bc4078cfaead05f892b3d78dea64. Reported-by: Randy Dunlap Signed-off-by: Jan Beulich Cc: Stefano Stabellini Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/early/ehci-dbgp.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index e426ad626d74..4bfa78af379c 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -614,12 +615,6 @@ err: return -ENODEV; } -int dbgp_external_startup(struct usb_hcd *hcd) -{ - return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup(); -} -EXPORT_SYMBOL_GPL(dbgp_external_startup); - static int ehci_reset_port(int port) { u32 portsc; @@ -979,6 +974,7 @@ struct console early_dbgp_console = { .index = -1, }; +#if IS_ENABLED(CONFIG_USB_EHCI_HCD) int dbgp_reset_prep(struct usb_hcd *hcd) { int ret = xen_dbgp_reset_prep(hcd); @@ -1007,6 +1003,13 @@ int dbgp_reset_prep(struct usb_hcd *hcd) } EXPORT_SYMBOL_GPL(dbgp_reset_prep); +int dbgp_external_startup(struct usb_hcd *hcd) +{ + return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup(); +} +EXPORT_SYMBOL_GPL(dbgp_external_startup); +#endif /* USB_EHCI_HCD */ + #ifdef CONFIG_KGDB static char kgdbdbgp_buf[DBGP_MAX_PACKET]; -- cgit v1.2.3 From 8fcff5f13773aa3898df1d13a1615d468079cb15 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sat, 27 Oct 2012 15:28:58 +0200 Subject: GPIO: mvebu-gpio: Don't initialize the mask_cache Due to the SMP nature of some of the chips, which have per CPU registers, the driver does not use the generic irq_gc_mask_set_bit() & irq_gc_mask_clr_bit() functions, which only support a single register. The driver has its own implementation of these functions, which can pick the correct register depending on the CPU being used. The functions do however use the gc->mask_cache value. The call to irq_setup_generic_chip() was passing IRQ_GC_INIT_MASK_CACHE, which caused the gc->mask_cache to be initialized to the contents of some random register. This resulted in unexpected interrupts been delivered from random GPIO lines. Signed-off-by: Andrew Lunn Tested-by: Jamie Lentin Acked-by: Thomas Petazzoni Tested-by: Michael Walle Signed-off-by: Linus Walleij --- drivers/gpio/gpio-mvebu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index 1bb43e3f9a61..fec421fe59b2 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -643,7 +643,7 @@ static int __devinit mvebu_gpio_probe(struct platform_device *pdev) ct->handler = handle_edge_irq; ct->chip.name = mvchip->chip.label; - irq_setup_generic_chip(gc, IRQ_MSK(ngpios), IRQ_GC_INIT_MASK_CACHE, + irq_setup_generic_chip(gc, IRQ_MSK(ngpios), 0, IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); /* Setup irq domain on top of the generic chip. */ -- cgit v1.2.3 From 02b898f2f04e418094f0093a3ad0b415bcdbe8eb Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 31 Oct 2012 11:42:03 +1100 Subject: md/raid1: Fix assembling of arrays containing Replacements. setup_conf in raid1.c uses conf->raid_disks before assigning a value. It is used when including 'Replacement' devices. The consequence is that assembling an array which contains a replacement will misbehave and either not include the replacement, or not include the device being replaced. Though this doesn't lead directly to data corruption, it could lead to reduced data safety. So use mddev->raid_disks, which is initialised, instead. Bug was introduced by commit c19d57980b38a5bb613a898937a1cf85f422fb9b md/raid1: recognise replacements when assembling arrays. in 3.3, so fix is suitable for 3.3.y thru 3.6.y. Cc: stable@vger.kernel.org Signed-off-by: NeilBrown --- drivers/md/raid1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 8034fbd6190c..636bae0405e8 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -2710,7 +2710,7 @@ static struct r1conf *setup_conf(struct mddev *mddev) || disk_idx < 0) continue; if (test_bit(Replacement, &rdev->flags)) - disk = conf->mirrors + conf->raid_disks + disk_idx; + disk = conf->mirrors + mddev->raid_disks + disk_idx; else disk = conf->mirrors + disk_idx; -- cgit v1.2.3 From ed30be077e705e0dff53bfc51d23feb8aeeab78f Mon Sep 17 00:00:00 2001 From: Jonathan Brassow Date: Wed, 31 Oct 2012 11:42:30 +1100 Subject: MD RAID10: Fix oops when creating RAID10 arrays via dm-raid.c Commit 2863b9eb didn't take into account the changes to add TRIM support to RAID10 (commit 532a2a3fb). That is, when using dm-raid.c to create the RAID10 arrays, there is no mddev->gendisk or mddev->queue. The code added to support TRIM simply assumes that mddev->queue is available without checking. The result is an oops any time dm-raid.c attempts to create a RAID10 device. Signed-off-by: Jonathan Brassow Signed-off-by: NeilBrown --- drivers/md/raid10.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 906ccbd0f7dc..d1295aff4173 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1783,7 +1783,7 @@ static int raid10_add_disk(struct mddev *mddev, struct md_rdev *rdev) clear_bit(Unmerged, &rdev->flags); } md_integrity_add_rdev(rdev, mddev); - if (blk_queue_discard(bdev_get_queue(rdev->bdev))) + if (mddev->queue && blk_queue_discard(bdev_get_queue(rdev->bdev))) queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue); print_conf(conf); @@ -3613,11 +3613,14 @@ static int run(struct mddev *mddev) discard_supported = true; } - if (discard_supported) - queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue); - else - queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, mddev->queue); - + if (mddev->queue) { + if (discard_supported) + queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, + mddev->queue); + else + queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, + mddev->queue); + } /* need to check that every block has at least one working mirror */ if (!enough(conf, -1)) { printk(KERN_ERR "md/raid10:%s: not enough operational mirrors.\n", -- cgit v1.2.3 From cee59f15a60cc6269a25e3f6fbf1a577d6ab8115 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 29 Oct 2012 09:03:07 +1000 Subject: drm/nouveau: silence modesetting spam on pre-gf8 chipsets Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv04_dac.c | 16 ++++++++-------- drivers/gpu/drm/nouveau/nv04_dfp.c | 14 +++++++------- drivers/gpu/drm/nouveau/nv04_tv.c | 9 ++++----- 3 files changed, 19 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nv04_dac.c b/drivers/gpu/drm/nouveau/nv04_dac.c index 347a3bd78d04..64f7020fb605 100644 --- a/drivers/gpu/drm/nouveau/nv04_dac.c +++ b/drivers/gpu/drm/nouveau/nv04_dac.c @@ -220,7 +220,7 @@ out: NVWriteVgaCrtc(dev, 0, NV_CIO_CR_MODE_INDEX, saved_cr_mode); if (blue == 0x18) { - NV_INFO(drm, "Load detected on head A\n"); + NV_DEBUG(drm, "Load detected on head A\n"); return connector_status_connected; } @@ -338,8 +338,8 @@ nv17_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector) if (nv17_dac_sample_load(encoder) & NV_PRAMDAC_TEST_CONTROL_SENSEB_ALLHI) { - NV_INFO(drm, "Load detected on output %c\n", - '@' + ffs(dcb->or)); + NV_DEBUG(drm, "Load detected on output %c\n", + '@' + ffs(dcb->or)); return connector_status_connected; } else { return connector_status_disconnected; @@ -413,9 +413,9 @@ static void nv04_dac_commit(struct drm_encoder *encoder) helper->dpms(encoder, DRM_MODE_DPMS_ON); - NV_INFO(drm, "Output %s is running on CRTC %d using output %c\n", - drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), - nv_crtc->index, '@' + ffs(nv_encoder->dcb->or)); + NV_DEBUG(drm, "Output %s is running on CRTC %d using output %c\n", + drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), + nv_crtc->index, '@' + ffs(nv_encoder->dcb->or)); } void nv04_dac_update_dacclk(struct drm_encoder *encoder, bool enable) @@ -461,8 +461,8 @@ static void nv04_dac_dpms(struct drm_encoder *encoder, int mode) return; nv_encoder->last_dpms = mode; - NV_INFO(drm, "Setting dpms mode %d on vga encoder (output %d)\n", - mode, nv_encoder->dcb->index); + NV_DEBUG(drm, "Setting dpms mode %d on vga encoder (output %d)\n", + mode, nv_encoder->dcb->index); nv04_dac_update_dacclk(encoder, mode == DRM_MODE_DPMS_ON); } diff --git a/drivers/gpu/drm/nouveau/nv04_dfp.c b/drivers/gpu/drm/nouveau/nv04_dfp.c index da55d7642c8c..184cdf806761 100644 --- a/drivers/gpu/drm/nouveau/nv04_dfp.c +++ b/drivers/gpu/drm/nouveau/nv04_dfp.c @@ -476,9 +476,9 @@ static void nv04_dfp_commit(struct drm_encoder *encoder) helper->dpms(encoder, DRM_MODE_DPMS_ON); - NV_INFO(drm, "Output %s is running on CRTC %d using output %c\n", - drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), - nv_crtc->index, '@' + ffs(nv_encoder->dcb->or)); + NV_DEBUG(drm, "Output %s is running on CRTC %d using output %c\n", + drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), + nv_crtc->index, '@' + ffs(nv_encoder->dcb->or)); } static void nv04_dfp_update_backlight(struct drm_encoder *encoder, int mode) @@ -520,8 +520,8 @@ static void nv04_lvds_dpms(struct drm_encoder *encoder, int mode) return; nv_encoder->last_dpms = mode; - NV_INFO(drm, "Setting dpms mode %d on lvds encoder (output %d)\n", - mode, nv_encoder->dcb->index); + NV_DEBUG(drm, "Setting dpms mode %d on lvds encoder (output %d)\n", + mode, nv_encoder->dcb->index); if (was_powersaving && is_powersaving_dpms(mode)) return; @@ -565,8 +565,8 @@ static void nv04_tmds_dpms(struct drm_encoder *encoder, int mode) return; nv_encoder->last_dpms = mode; - NV_INFO(drm, "Setting dpms mode %d on tmds encoder (output %d)\n", - mode, nv_encoder->dcb->index); + NV_DEBUG(drm, "Setting dpms mode %d on tmds encoder (output %d)\n", + mode, nv_encoder->dcb->index); nv04_dfp_update_backlight(encoder, mode); nv04_dfp_update_fp_control(encoder, mode); diff --git a/drivers/gpu/drm/nouveau/nv04_tv.c b/drivers/gpu/drm/nouveau/nv04_tv.c index 099fbeda6e2e..62e826a139b3 100644 --- a/drivers/gpu/drm/nouveau/nv04_tv.c +++ b/drivers/gpu/drm/nouveau/nv04_tv.c @@ -75,8 +75,8 @@ static void nv04_tv_dpms(struct drm_encoder *encoder, int mode) struct nv04_mode_state *state = &nv04_display(dev)->mode_reg; uint8_t crtc1A; - NV_INFO(drm, "Setting dpms mode %d on TV encoder (output %d)\n", - mode, nv_encoder->dcb->index); + NV_DEBUG(drm, "Setting dpms mode %d on TV encoder (output %d)\n", + mode, nv_encoder->dcb->index); state->pllsel &= ~(PLLSEL_TV_CRTC1_MASK | PLLSEL_TV_CRTC2_MASK); @@ -167,9 +167,8 @@ static void nv04_tv_commit(struct drm_encoder *encoder) helper->dpms(encoder, DRM_MODE_DPMS_ON); - NV_INFO(drm, "Output %s is running on CRTC %d using output %c\n", - drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), nv_crtc->index, - '@' + ffs(nv_encoder->dcb->or)); + NV_DEBUG(drm, "Output %s is running on CRTC %d using output %c\n", + drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), nv_crtc->index, '@' + ffs(nv_encoder->dcb->or)); } static void nv04_tv_destroy(struct drm_encoder *encoder) -- cgit v1.2.3 From 1249ac592a2f995fef977be33abf077bdb57b3aa Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 30 Oct 2012 15:07:58 +1000 Subject: drm/nouveau/i2c: fix typo when checking nvio i2c port validity Reported-by: Mathieu Chouquet-Stringer Tested-by: Mathieu Chouquet-Stringer Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/i2c/base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/core/subdev/i2c/base.c b/drivers/gpu/drm/nouveau/core/subdev/i2c/base.c index 3d2c88310f98..dbfc2abf0cfe 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/i2c/base.c +++ b/drivers/gpu/drm/nouveau/core/subdev/i2c/base.c @@ -292,7 +292,7 @@ nouveau_i2c_ctor(struct nouveau_object *parent, struct nouveau_object *engine, case DCB_I2C_NVIO_BIT: port->drive = info.drive & 0x0f; if (device->card_type < NV_D0) { - if (info.drive >= ARRAY_SIZE(nv50_i2c_port)) + if (port->drive >= ARRAY_SIZE(nv50_i2c_port)) break; port->drive = nv50_i2c_port[port->drive]; port->sense = port->drive; -- cgit v1.2.3 From a7dbf00433fa9dc6f4a3828a17d56a9df2bd06b1 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 31 Oct 2012 11:19:40 +1000 Subject: drm/nouveau: allow creation of zero-sized mm Useful for places where a given chipset may or may not have a given resource, and we want to avoid having to spray checks for the mm's existance around everywhere. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/core/mm.c | 9 ++++++--- drivers/gpu/drm/nouveau/core/include/core/mm.h | 1 - 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/core/core/mm.c b/drivers/gpu/drm/nouveau/core/core/mm.c index 4d6206448670..a6d3cd6490f7 100644 --- a/drivers/gpu/drm/nouveau/core/core/mm.c +++ b/drivers/gpu/drm/nouveau/core/core/mm.c @@ -218,13 +218,16 @@ nouveau_mm_init(struct nouveau_mm *mm, u32 offset, u32 length, u32 block) node = kzalloc(sizeof(*node), GFP_KERNEL); if (!node) return -ENOMEM; - node->offset = roundup(offset, mm->block_size); - node->length = rounddown(offset + length, mm->block_size) - node->offset; + + if (length) { + node->offset = roundup(offset, mm->block_size); + node->length = rounddown(offset + length, mm->block_size); + node->length -= node->offset; + } list_add_tail(&node->nl_entry, &mm->nodes); list_add_tail(&node->fl_entry, &mm->free); mm->heap_nodes++; - mm->heap_size += length; return 0; } diff --git a/drivers/gpu/drm/nouveau/core/include/core/mm.h b/drivers/gpu/drm/nouveau/core/include/core/mm.h index 9ee9bf4028ca..975137ba34a6 100644 --- a/drivers/gpu/drm/nouveau/core/include/core/mm.h +++ b/drivers/gpu/drm/nouveau/core/include/core/mm.h @@ -19,7 +19,6 @@ struct nouveau_mm { u32 block_size; int heap_nodes; - u32 heap_size; }; int nouveau_mm_init(struct nouveau_mm *, u32 offset, u32 length, u32 block); -- cgit v1.2.3 From 5cad16acd25b16681a060d28d10eeacf98d07701 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 31 Oct 2012 10:51:00 +1000 Subject: drm/nv50/fb: prevent oops on chipsets without compression tags Unconditionally create the tagram mm, even if there's zero tags. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c b/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c index 27fb1af7a779..5f570806143a 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c +++ b/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c @@ -219,13 +219,11 @@ nv50_fb_ctor(struct nouveau_object *parent, struct nouveau_object *engine, ((priv->base.ram.size & 0x000000ff) << 32); tags = nv_rd32(priv, 0x100320); - if (tags) { - ret = nouveau_mm_init(&priv->base.tags, 0, tags, 1); - if (ret) - return ret; + ret = nouveau_mm_init(&priv->base.tags, 0, tags, 1); + if (ret) + return ret; - nv_debug(priv, "%d compression tags\n", tags); - } + nv_debug(priv, "%d compression tags\n", tags); size = (priv->base.ram.size >> 12) - rsvd_head - rsvd_tail; switch (device->chipset) { -- cgit v1.2.3 From 9430738d80223a1cd791a2baa74fa170d3df1262 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 31 Oct 2012 12:11:15 +1000 Subject: drm/nouveau: resurrect headless mode since rework Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_display.c | 34 +++++++++++++++++-------------- drivers/gpu/drm/nouveau/nouveau_drm.c | 34 +++++++++++++++++++------------ drivers/gpu/drm/nouveau/nouveau_drm.h | 2 ++ drivers/gpu/drm/nouveau/nouveau_irq.c | 16 ++++++++------- 4 files changed, 51 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index d2f8ffeed742..0185837d9862 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -360,23 +360,26 @@ nouveau_display_create(struct drm_device *dev) drm_kms_helper_poll_init(dev); drm_kms_helper_poll_disable(dev); - if (nv_device(drm->device)->card_type < NV_50) - ret = nv04_display_create(dev); - else - if (nv_device(drm->device)->card_type < NV_D0) - ret = nv50_display_create(dev); - else - ret = nvd0_display_create(dev); - if (ret) - goto disp_create_err; - - if (dev->mode_config.num_crtc) { - ret = drm_vblank_init(dev, dev->mode_config.num_crtc); + if (nouveau_modeset == 1) { + if (nv_device(drm->device)->card_type < NV_50) + ret = nv04_display_create(dev); + else + if (nv_device(drm->device)->card_type < NV_D0) + ret = nv50_display_create(dev); + else + ret = nvd0_display_create(dev); if (ret) - goto vblank_err; + goto disp_create_err; + + if (dev->mode_config.num_crtc) { + ret = drm_vblank_init(dev, dev->mode_config.num_crtc); + if (ret) + goto vblank_err; + } + + nouveau_backlight_init(dev); } - nouveau_backlight_init(dev); return 0; vblank_err: @@ -395,7 +398,8 @@ nouveau_display_destroy(struct drm_device *dev) nouveau_backlight_exit(dev); drm_vblank_cleanup(dev); - disp->dtor(dev); + if (disp->dtor) + disp->dtor(dev); drm_kms_helper_poll_fini(dev); drm_mode_config_cleanup(dev); diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index ccae8c26ae2b..9cc83f18f9dc 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -63,8 +63,9 @@ MODULE_PARM_DESC(noaccel, "disable kernel/abi16 acceleration"); static int nouveau_noaccel = 0; module_param_named(noaccel, nouveau_noaccel, int, 0400); -MODULE_PARM_DESC(modeset, "enable driver"); -static int nouveau_modeset = -1; +MODULE_PARM_DESC(modeset, "enable driver (default: auto, " + "0 = disabled, 1 = enabled, 2 = headless)"); +int nouveau_modeset = -1; module_param_named(modeset, nouveau_modeset, int, 0400); static struct drm_driver driver; @@ -363,7 +364,8 @@ nouveau_drm_unload(struct drm_device *dev) nouveau_pm_fini(dev); - nouveau_display_fini(dev); + if (dev->mode_config.num_crtc) + nouveau_display_fini(dev); nouveau_display_destroy(dev); nouveau_irq_fini(dev); @@ -403,13 +405,15 @@ nouveau_drm_suspend(struct pci_dev *pdev, pm_message_t pm_state) pm_state.event == PM_EVENT_PRETHAW) return 0; - NV_INFO(drm, "suspending fbcon...\n"); - nouveau_fbcon_set_suspend(dev, 1); + if (dev->mode_config.num_crtc) { + NV_INFO(drm, "suspending fbcon...\n"); + nouveau_fbcon_set_suspend(dev, 1); - NV_INFO(drm, "suspending display...\n"); - ret = nouveau_display_suspend(dev); - if (ret) - return ret; + NV_INFO(drm, "suspending display...\n"); + ret = nouveau_display_suspend(dev); + if (ret) + return ret; + } NV_INFO(drm, "evicting buffers...\n"); ttm_bo_evict_mm(&drm->ttm.bdev, TTM_PL_VRAM); @@ -445,8 +449,10 @@ fail_client: nouveau_client_init(&cli->base); } - NV_INFO(drm, "resuming display...\n"); - nouveau_display_resume(dev); + if (dev->mode_config.num_crtc) { + NV_INFO(drm, "resuming display...\n"); + nouveau_display_resume(dev); + } return ret; } @@ -486,8 +492,10 @@ nouveau_drm_resume(struct pci_dev *pdev) nouveau_irq_postinstall(dev); nouveau_pm_resume(dev); - NV_INFO(drm, "resuming display...\n"); - nouveau_display_resume(dev); + if (dev->mode_config.num_crtc) { + NV_INFO(drm, "resuming display...\n"); + nouveau_display_resume(dev); + } return 0; } diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.h b/drivers/gpu/drm/nouveau/nouveau_drm.h index 819471217546..a10169927086 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.h +++ b/drivers/gpu/drm/nouveau/nouveau_drm.h @@ -141,4 +141,6 @@ int nouveau_drm_resume(struct pci_dev *); nv_info((cli), fmt, ##args); \ } while (0) +extern int nouveau_modeset; + #endif diff --git a/drivers/gpu/drm/nouveau/nouveau_irq.c b/drivers/gpu/drm/nouveau/nouveau_irq.c index 9ca8afdb5549..1d8cb506a28a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_irq.c +++ b/drivers/gpu/drm/nouveau/nouveau_irq.c @@ -61,13 +61,15 @@ nouveau_irq_handler(DRM_IRQ_ARGS) nv_subdev(pmc)->intr(nv_subdev(pmc)); - if (device->card_type >= NV_D0) { - if (nv_rd32(device, 0x000100) & 0x04000000) - nvd0_display_intr(dev); - } else - if (device->card_type >= NV_50) { - if (nv_rd32(device, 0x000100) & 0x04000000) - nv50_display_intr(dev); + if (dev->mode_config.num_crtc) { + if (device->card_type >= NV_D0) { + if (nv_rd32(device, 0x000100) & 0x04000000) + nvd0_display_intr(dev); + } else + if (device->card_type >= NV_50) { + if (nv_rd32(device, 0x000100) & 0x04000000) + nv50_display_intr(dev); + } } return IRQ_HANDLED; -- cgit v1.2.3 From e412e95a268fa8544858ebfe066826b290430d51 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 31 Oct 2012 12:16:06 +1000 Subject: drm/nouveau: headless mode by default if pci class != vga display This is to prevent nouveau from taking over the console on headless boards such as Tesla. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_display.c | 4 +++- drivers/gpu/drm/nouveau/nouveau_drm.c | 2 -- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index 0185837d9862..86124b131f4f 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -290,6 +290,7 @@ nouveau_display_create(struct drm_device *dev) struct nouveau_drm *drm = nouveau_drm(dev); struct nouveau_disp *pdisp = nouveau_disp(drm->device); struct nouveau_display *disp; + u32 pclass = dev->pdev->class >> 8; int ret, gen; disp = drm->display = kzalloc(sizeof(*disp), GFP_KERNEL); @@ -360,7 +361,8 @@ nouveau_display_create(struct drm_device *dev) drm_kms_helper_poll_init(dev); drm_kms_helper_poll_disable(dev); - if (nouveau_modeset == 1) { + if (nouveau_modeset == 1 || + (nouveau_modeset < 0 && pclass == PCI_CLASS_DISPLAY_VGA)) { if (nv_device(drm->device)->card_type < NV_50) ret = nv04_display_create(dev); else diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index 9cc83f18f9dc..0910125cbbc3 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -670,9 +670,7 @@ nouveau_drm_init(void) #ifdef CONFIG_VGA_CONSOLE if (vgacon_text_force()) nouveau_modeset = 0; - else #endif - nouveau_modeset = 1; } if (!nouveau_modeset) -- cgit v1.2.3 From 32ed1911fc79908d704023317d4ddeb3883fd07e Mon Sep 17 00:00:00 2001 From: Rolf Eike Beer Date: Tue, 30 Oct 2012 23:39:10 -0700 Subject: Input: tsc40 - remove wrong announcement of pressure support The tsc40 driver announces it supports the pressure event, but will never send one. The announcement will cause tslib to wait for such events and sending all touch events with a pressure of 0. Removing the announcement will make tslib fall back to emulating the pressure on touch events so everything works as expected. Signed-off-by: Rolf Eike Beer Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/tsc40.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/tsc40.c b/drivers/input/touchscreen/tsc40.c index 63209aaa55f0..eb96f168fb9d 100644 --- a/drivers/input/touchscreen/tsc40.c +++ b/drivers/input/touchscreen/tsc40.c @@ -107,7 +107,6 @@ static int tsc_connect(struct serio *serio, struct serio_driver *drv) __set_bit(BTN_TOUCH, input_dev->keybit); input_set_abs_params(ptsc->dev, ABS_X, 0, 0x3ff, 0, 0); input_set_abs_params(ptsc->dev, ABS_Y, 0, 0x3ff, 0, 0); - input_set_abs_params(ptsc->dev, ABS_PRESSURE, 0, 0, 0, 0); serio_set_drvdata(serio, ptsc); -- cgit v1.2.3 From 3ccc60f9d8c39180c205dba1a020735bda1b2491 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 19 Oct 2012 13:28:46 +0200 Subject: HID: microsoft: fix invalid rdesc for 3k kbd Microsoft Digital Media Keyboard 3000 has two interfaces, and the second one has a report descriptor with a bug. The second collection says: 05 01 -- global; usage page -- 01 -- Generic Desktop Controls 09 80 -- local; usage -- 80 -- System Control a1 01 -- main; collection -- 01 -- application 85 03 -- global; report ID -- 03 19 00 -- local; Usage Minimum -- 00 29 ff -- local; Usage Maximum -- ff 15 00 -- global; Logical Minimum -- 0 26 ff 00 -- global; Logical Maximum -- ff 81 00 -- main; input c0 -- main; End Collection I.e. it makes us think that there are all kinds of usages of system control. That the keyboard is a not only a keyboard, but also a joystick, mouse, gamepad, keypad, etc. The same as for the Wireless Desktop Receiver, this should be Physical Min/Max. So fix that appropriately. References: https://bugzilla.novell.com/show_bug.cgi?id=776834 Cc: Signed-off-by: Jiri Slaby Signed-off-by: Jiri Kosina --- drivers/hid/hid-microsoft.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c index 3acdcfcc17df..f676c01bb471 100644 --- a/drivers/hid/hid-microsoft.c +++ b/drivers/hid/hid-microsoft.c @@ -28,22 +28,30 @@ #define MS_RDESC 0x08 #define MS_NOGET 0x10 #define MS_DUPLICATE_USAGES 0x20 +#define MS_RDESC_3K 0x40 -/* - * Microsoft Wireless Desktop Receiver (Model 1028) has - * 'Usage Min/Max' where it ought to have 'Physical Min/Max' - */ static __u8 *ms_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int *rsize) { unsigned long quirks = (unsigned long)hid_get_drvdata(hdev); + /* + * Microsoft Wireless Desktop Receiver (Model 1028) has + * 'Usage Min/Max' where it ought to have 'Physical Min/Max' + */ if ((quirks & MS_RDESC) && *rsize == 571 && rdesc[557] == 0x19 && rdesc[559] == 0x29) { hid_info(hdev, "fixing up Microsoft Wireless Receiver Model 1028 report descriptor\n"); rdesc[557] = 0x35; rdesc[559] = 0x45; } + /* the same as above (s/usage/physical/) */ + if ((quirks & MS_RDESC_3K) && *rsize == 106 && + !memcmp((char []){ 0x19, 0x00, 0x29, 0xff }, + &rdesc[94], 4)) { + rdesc[94] = 0x35; + rdesc[96] = 0x45; + } return rdesc; } @@ -192,7 +200,7 @@ static const struct hid_device_id ms_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_USB), .driver_data = MS_PRESENTER }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K), - .driver_data = MS_ERGONOMY }, + .driver_data = MS_ERGONOMY | MS_RDESC_3K }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0), .driver_data = MS_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_COMFORT_MOUSE_4500), -- cgit v1.2.3 From 65b258e9b57980c8241342928d5cd717ee11a68b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 25 Oct 2012 15:35:25 +0100 Subject: HID: multitouch: put the case in the right switch statement Signed-off-by: Alan Cox Acked-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-multitouch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 3eb02b94fc87..c97011cdf852 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -421,11 +421,11 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, * contact max are global to the report */ td->last_field_index = field->index; return -1; - } case HID_DG_TOUCH: /* Legacy devices use TIPSWITCH and not TOUCH. * Let's just ignore this field. */ return -1; + } /* let hid-input decide for the others */ return 0; -- cgit v1.2.3 From 58ad34bf62b9fc52c04e6aabe3ad5a47e4a00dc1 Mon Sep 17 00:00:00 2001 From: Xianhan Yu Date: Mon, 29 Oct 2012 23:04:37 +0800 Subject: HID: multitouch: fix maxcontacts problem on GeneralTouch Fix maxcontacts problem for PWT GeneralTouch multi-touchscreen. Our device didn't contain HID_DG_CONTACTMAX usage. This usage use to describe touchscreen's maxcontacts for hid-multitouch.c to get maxcontacts automatic. We fix the device that driver can get maxcontact from our device, hence it doesn't need .maxcontact=10. Now there is just one device class can fix all our PWT touchscreen. Signed-off-by: Xianhan Yu Signed-off-by: Jiri Kosina --- drivers/hid/hid-multitouch.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index c97011cdf852..7867d69f0efe 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -210,8 +210,7 @@ static struct mt_class mt_classes[] = { }, { .name = MT_CLS_GENERALTOUCH_PWT_TENFINGERS, .quirks = MT_QUIRK_NOT_SEEN_MEANS_UP | - MT_QUIRK_SLOT_IS_CONTACTNUMBER, - .maxcontacts = 10 + MT_QUIRK_SLOT_IS_CONTACTNUMBER }, { .name = MT_CLS_FLATFROG, -- cgit v1.2.3 From 8d80da90f53d37cf6caefc61353e1cc3a145b9e0 Mon Sep 17 00:00:00 2001 From: Dirk Hohndel Date: Tue, 30 Oct 2012 11:11:48 -0700 Subject: HID: Add support for the MacBook Pro 10,2 keyboard / touchpad This enables the existing drivers for keyboard and touchpad with the new USB IDs found on the MBP 13" Reasonable Resolution (also known as the Retina Display). Added entries to both keyboard and mouse ignore lists. Signed-off-by: Dirk Hohndel Signed-off-by: Jiri Kosina --- drivers/hid/hid-apple.c | 6 ++++++ drivers/hid/hid-core.c | 6 ++++++ drivers/hid/hid-ids.h | 3 +++ drivers/input/mouse/bcm5974.c | 21 +++++++++++++++++++++ 4 files changed, 36 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index 06ebdbb6ea02..fd7722aecf77 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -522,6 +522,12 @@ static const struct hid_device_id apple_devices[] = { .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS), .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI), + .driver_data = APPLE_HAS_FN }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO), + .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS), + .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO), diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index bd3971bf31bf..f4109fd657ff 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1532,6 +1532,9 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) }, @@ -2139,6 +2142,9 @@ static const struct hid_device_id hid_mouse_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, { } diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 269b50912a4a..9d7a42857ea1 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -118,6 +118,9 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI 0x0252 #define USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO 0x0253 #define USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS 0x0254 +#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI 0x0259 +#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO 0x025a +#define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS 0x025b #define USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI 0x0249 #define USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO 0x024a #define USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS 0x024b diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 3a78f235fa3e..2baff1b79a55 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -84,6 +84,10 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI 0x0262 #define USB_DEVICE_ID_APPLE_WELLSPRING7_ISO 0x0263 #define USB_DEVICE_ID_APPLE_WELLSPRING7_JIS 0x0264 +/* MacbookPro10,2 (unibody, October 2012) */ +#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI 0x0259 +#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO 0x025a +#define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS 0x025b #define BCM5974_DEVICE(prod) { \ .match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \ @@ -137,6 +141,10 @@ static const struct usb_device_id bcm5974_table[] = { BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ISO), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_JIS), + /* MacbookPro10,2 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS), /* Terminating entry */ {} }; @@ -379,6 +387,19 @@ static const struct bcm5974_config bcm5974_config_table[] = { { SN_COORD, -150, 6730 }, { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } }, + { + USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS, + HAS_INTEGRATED_BUTTON, + 0x84, sizeof(struct bt_data), + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, + { SN_PRESSURE, 0, 300 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4750, 5280 }, + { SN_COORD, -150, 6730 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } + }, {} }; -- cgit v1.2.3 From 44c91697fb1add76f9f8c28c0d21b82b05b5d4cb Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Thu, 18 Oct 2012 18:59:55 +0900 Subject: drm/exynos: fix display on issue When crtc_funcs->dpms callback is called, exynos_crtc->dpms and exynos_encoder->dpms are changed to new mode. But if user requests dpms mode operation, OFF -> ON, when crtc's dpms callback is called, exynos_encoder->dpms is also changed to ON. This makes encoder's dpms callback call be ignored so display power couldn't become on again. This patch removes exynos_encoder->dpms changing and adds 'updated' variable to exynos_drm_encoder structure to avoid duplicated overlay updating. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_connector.c | 1 + drivers/gpu/drm/exynos/exynos_drm_encoder.c | 33 ++++++++++++++------------- 2 files changed, 18 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_connector.c b/drivers/gpu/drm/exynos/exynos_drm_connector.c index 18c271862ca8..0f68a2872673 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_connector.c +++ b/drivers/gpu/drm/exynos/exynos_drm_connector.c @@ -374,6 +374,7 @@ struct drm_connector *exynos_drm_connector_create(struct drm_device *dev, exynos_connector->encoder_id = encoder->base.id; exynos_connector->manager = manager; exynos_connector->dpms = DRM_MODE_DPMS_OFF; + connector->dpms = DRM_MODE_DPMS_OFF; connector->encoder = encoder; err = drm_mode_connector_attach_encoder(connector, encoder); diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c index e51503fbaf2b..241ad1eeec64 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c +++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c @@ -43,12 +43,14 @@ * @manager: specific encoder has its own manager to control a hardware * appropriately and we can access a hardware drawing on this manager. * @dpms: store the encoder dpms value. + * @updated: indicate whether overlay data updating is needed or not. */ struct exynos_drm_encoder { struct drm_crtc *old_crtc; struct drm_encoder drm_encoder; struct exynos_drm_manager *manager; - int dpms; + int dpms; + bool updated; }; static void exynos_drm_connector_power(struct drm_encoder *encoder, int mode) @@ -85,7 +87,9 @@ static void exynos_drm_encoder_dpms(struct drm_encoder *encoder, int mode) switch (mode) { case DRM_MODE_DPMS_ON: if (manager_ops && manager_ops->apply) - manager_ops->apply(manager->dev); + if (!exynos_encoder->updated) + manager_ops->apply(manager->dev); + exynos_drm_connector_power(encoder, mode); exynos_encoder->dpms = mode; break; @@ -94,6 +98,7 @@ static void exynos_drm_encoder_dpms(struct drm_encoder *encoder, int mode) case DRM_MODE_DPMS_OFF: exynos_drm_connector_power(encoder, mode); exynos_encoder->dpms = mode; + exynos_encoder->updated = false; break; default: DRM_ERROR("unspecified mode %d\n", mode); @@ -205,13 +210,22 @@ static void exynos_drm_encoder_prepare(struct drm_encoder *encoder) static void exynos_drm_encoder_commit(struct drm_encoder *encoder) { - struct exynos_drm_manager *manager = exynos_drm_get_manager(encoder); + struct exynos_drm_encoder *exynos_encoder = to_exynos_encoder(encoder); + struct exynos_drm_manager *manager = exynos_encoder->manager; struct exynos_drm_manager_ops *manager_ops = manager->ops; DRM_DEBUG_KMS("%s\n", __FILE__); if (manager_ops && manager_ops->commit) manager_ops->commit(manager->dev); + + /* + * this will avoid one issue that overlay data is updated to + * real hardware two times. + * And this variable will be used to check if the data was + * already updated or not by exynos_drm_encoder_dpms function. + */ + exynos_encoder->updated = true; } static void exynos_drm_encoder_disable(struct drm_encoder *encoder) @@ -400,19 +414,6 @@ void exynos_drm_encoder_crtc_dpms(struct drm_encoder *encoder, void *data) if (manager_ops && manager_ops->dpms) manager_ops->dpms(manager->dev, mode); - /* - * set current mode to new one so that data aren't updated into - * registers by drm_helper_connector_dpms two times. - * - * in case that drm_crtc_helper_set_mode() is called, - * overlay_ops->commit() and manager_ops->commit() callbacks - * can be called two times, first at drm_crtc_helper_set_mode() - * and second at drm_helper_connector_dpms(). - * so with this setting, when drm_helper_connector_dpms() is called - * encoder->funcs->dpms() will be ignored. - */ - exynos_encoder->dpms = mode; - /* * if this condition is ok then it means that the crtc is already * detached from encoder and last function for detaching is properly -- cgit v1.2.3 From 9eb3e9e6f3cface0d2ffa8d889f44af27dcbce7b Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 29 Oct 2012 09:31:13 +0100 Subject: drm/exynos: add support for ARCH_MULTIPLATFORM Exynos does not seem to have any dependency on anything from platform headers so just needs Kconfig updated to build in ARCH_MULTIPLATFORM builds. Signed-off-by: Rob Clark Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig index 59a26e577b57..fc345d4ebb03 100644 --- a/drivers/gpu/drm/exynos/Kconfig +++ b/drivers/gpu/drm/exynos/Kconfig @@ -1,6 +1,6 @@ config DRM_EXYNOS tristate "DRM Support for Samsung SoC EXYNOS Series" - depends on DRM && PLAT_SAMSUNG + depends on DRM && (PLAT_SAMSUNG || ARCH_MULTIPLATFORM) select DRM_KMS_HELPER select FB_CFB_FILLRECT select FB_CFB_COPYAREA -- cgit v1.2.3 From 2cdc53b355873ab54b6a348ee5bf022967fb4159 Mon Sep 17 00:00:00 2001 From: Rahul Sharma Date: Wed, 31 Oct 2012 09:36:26 +0530 Subject: drm: exynos: removed warning due to missing typecast for mixer driver data Removing the warning by adding proper type casting where local pointer variable of type mixer driver data is assigned with void pointer. Signed-off-by: Rahul Sharma Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_mixer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 614b2e9ac462..e7fbb823fd8e 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -1142,7 +1142,7 @@ static int __devinit mixer_probe(struct platform_device *pdev) const struct of_device_id *match; match = of_match_node(of_match_ptr(mixer_match_types), pdev->dev.of_node); - drv = match->data; + drv = (struct mixer_drv_data *)match->data; } else { drv = (struct mixer_drv_data *) platform_get_device_id(pdev)->driver_data; -- cgit v1.2.3 From 3c172868cbbe3eb138fd57bb346c77dffb22b182 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Fri, 26 Oct 2012 06:24:34 +0000 Subject: vxlan: don't expire permanent entries VXLAN confused flag versus bitmap on state. Based on part of a earlier patch by David Stevens. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 607976c00162..7b4adde93c01 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -816,7 +816,7 @@ static void vxlan_cleanup(unsigned long arg) = container_of(p, struct vxlan_fdb, hlist); unsigned long timeout; - if (f->state == NUD_PERMANENT) + if (f->state & NUD_PERMANENT) continue; timeout = f->used + vxlan->age_interval * HZ; -- cgit v1.2.3 From 29c4bcddaa62e2b9fd2ba85668f6718b0b43f0e3 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Wed, 31 Oct 2012 00:30:38 +0100 Subject: cpufreq / powernow-k8: Change maintainer's email address Change the Andreas' email address in drivers/cpufreq/powernow-k8.c. Signed-off-by: Andreas Herrmann Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/powernow-k8.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c index c16a3a593ba4..e3ebb4fa2c3e 100644 --- a/drivers/cpufreq/powernow-k8.c +++ b/drivers/cpufreq/powernow-k8.c @@ -5,7 +5,7 @@ * http://www.gnu.org/licenses/gpl.html * * Maintainer: - * Andreas Herrmann + * Andreas Herrmann * * Based on the powernow-k7.c module written by Dave Jones. * (C) 2003 Dave Jones on behalf of SuSE Labs -- cgit v1.2.3 From dea5f0998aa82bdeca260b87c653db11e91329b2 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 31 Oct 2012 22:04:26 -0700 Subject: target: Re-add explict zeroing of INQUIRY bounce buffer memory This patch fixes a regression in spc_emulate_inquiry() code where the local scope bounce buffer was no longer getting it's memory zeroed, causing various problems with SCSI initiators that depend upon areas of INQUIRY EVPD=0x83 payload having been zeroed. This bug was introduced with the following v3.7-rc1 patch + CC'ed stable commit: commit ffe7b0e9326d9c68f5688bef691dd49f1e0d3651 Author: Paolo Bonzini Date: Fri Sep 7 17:30:38 2012 +0200 target: support zero allocation length in INQUIRY Go ahead and re-add the missing memset of bounce buffer memory to be copied into the outgoing se_cmd descriptor kmapped SGL payload. Reported-by: Kelsey Prantis Cc: Kelsey Prantis Cc: Paolo Bonzini Cc: Andy Grover Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_spc.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/target/target_core_spc.c b/drivers/target/target_core_spc.c index 9229bd9ad61b..6fd434d3d7e4 100644 --- a/drivers/target/target_core_spc.c +++ b/drivers/target/target_core_spc.c @@ -605,6 +605,8 @@ static int spc_emulate_inquiry(struct se_cmd *cmd) unsigned char buf[SE_INQUIRY_BUF]; int p, ret; + memset(buf, 0, SE_INQUIRY_BUF); + if (dev == tpg->tpg_virt_lun0.lun_se_dev) buf[0] = 0x3f; /* Not connected */ else -- cgit v1.2.3 From 0d0f9dfb31e0a6c92063e235417b42df185b3275 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 31 Oct 2012 09:16:44 -0700 Subject: target: Don't return success from module_init() if setup fails If the call to core_dev_release_virtual_lun0() fails, then nothing sets ret to anything other than 0, so even though everything is torn down and freed, target_core_init_configfs() will seem to succeed and the module will be loaded. Fix this by passing the return value on up the chain. Signed-off-by: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_configfs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c index 015f5be27bf6..c123327499a3 100644 --- a/drivers/target/target_core_configfs.c +++ b/drivers/target/target_core_configfs.c @@ -3206,7 +3206,8 @@ static int __init target_core_init_configfs(void) if (ret < 0) goto out; - if (core_dev_setup_virtual_lun0() < 0) + ret = core_dev_setup_virtual_lun0(); + if (ret < 0) goto out; return 0; -- cgit v1.2.3 From 3e03989b5868acf69a391a424dc71fcd6cc48167 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 31 Oct 2012 09:16:45 -0700 Subject: target: Avoid integer overflow in se_dev_align_max_sectors() The expression (max_sectors * block_size) might overflow a u32 (indeed, since iblock sets max_hw_sectors to UINT_MAX, it is guaranteed to overflow and end up with a much-too-small result in many common cases). Fix this by doing an equivalent calculation that doesn't require multiplication. While we're touching this code, avoid splitting a printk format across two lines and use pr_info(...) instead of printk(KERN_INFO ...). Signed-off-by: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_device.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 8d774da16320..9abef9f8eb76 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -850,20 +850,20 @@ int se_dev_check_shutdown(struct se_device *dev) static u32 se_dev_align_max_sectors(u32 max_sectors, u32 block_size) { - u32 tmp, aligned_max_sectors; + u32 aligned_max_sectors; + u32 alignment; /* * Limit max_sectors to a PAGE_SIZE aligned value for modern * transport_allocate_data_tasks() operation. */ - tmp = rounddown((max_sectors * block_size), PAGE_SIZE); - aligned_max_sectors = (tmp / block_size); - if (max_sectors != aligned_max_sectors) { - printk(KERN_INFO "Rounding down aligned max_sectors from %u" - " to %u\n", max_sectors, aligned_max_sectors); - return aligned_max_sectors; - } + alignment = max(1ul, PAGE_SIZE / block_size); + aligned_max_sectors = rounddown(max_sectors, alignment); + + if (max_sectors != aligned_max_sectors) + pr_info("Rounding down aligned max_sectors from %u to %u\n", + max_sectors, aligned_max_sectors); - return max_sectors; + return aligned_max_sectors; } void se_dev_set_default_attribs( -- cgit v1.2.3 From d5627acba9ae584cf4928af19f7ddf5f6837de32 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 31 Oct 2012 09:16:46 -0700 Subject: iscsi-target: Fix missed wakeup race in TX thread The sleeping code in iscsi_target_tx_thread() is susceptible to the classic missed wakeup race: - TX thread finishes handle_immediate_queue() and handle_response_queue(), thinks both queues are empty. - Another thread adds a queue entry and does wake_up_process(), which does nothing because the TX thread is still awake. - TX thread does schedule_timeout() and sleeps forever. In practice this can kill an iSCSI connection if for example an initiator does single-threaded writes and the target misses the wakeup window when queueing an R2T; in this case the connection will be stuck until the initiator loses patience and does some task management operation (or kills the connection entirely). Fix this by converting to wait_event_interruptible(), which does not suffer from this sort of race. Signed-off-by: Roland Dreier Cc: Andy Grover Cc: Hannes Reinecke Cc: Christoph Hellwig Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 4 +++- drivers/target/iscsi/iscsi_target_core.h | 1 + drivers/target/iscsi/iscsi_target_login.c | 1 + drivers/target/iscsi/iscsi_target_util.c | 22 ++++++++++++++++++++-- drivers/target/iscsi/iscsi_target_util.h | 1 + 5 files changed, 26 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index d6ce2182e672..035c2c762537 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -3719,7 +3719,9 @@ restart: */ iscsit_thread_check_cpumask(conn, current, 1); - schedule_timeout_interruptible(MAX_SCHEDULE_TIMEOUT); + wait_event_interruptible(conn->queues_wq, + !iscsit_conn_all_queues_empty(conn) || + ts->status == ISCSI_THREAD_SET_RESET); if ((ts->status == ISCSI_THREAD_SET_RESET) || signal_pending(current)) diff --git a/drivers/target/iscsi/iscsi_target_core.h b/drivers/target/iscsi/iscsi_target_core.h index 2ba9f9b9435c..21048dbf7d13 100644 --- a/drivers/target/iscsi/iscsi_target_core.h +++ b/drivers/target/iscsi/iscsi_target_core.h @@ -486,6 +486,7 @@ struct iscsi_tmr_req { }; struct iscsi_conn { + wait_queue_head_t queues_wq; /* Authentication Successful for this connection */ u8 auth_complete; /* State connection is currently in */ diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c index cdc8a10939c3..f8dbec05d5e5 100644 --- a/drivers/target/iscsi/iscsi_target_login.c +++ b/drivers/target/iscsi/iscsi_target_login.c @@ -41,6 +41,7 @@ static int iscsi_login_init_conn(struct iscsi_conn *conn) { + init_waitqueue_head(&conn->queues_wq); INIT_LIST_HEAD(&conn->conn_list); INIT_LIST_HEAD(&conn->conn_cmd_list); INIT_LIST_HEAD(&conn->immed_queue_list); diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c index afd98ccd40ae..1a91195ab619 100644 --- a/drivers/target/iscsi/iscsi_target_util.c +++ b/drivers/target/iscsi/iscsi_target_util.c @@ -488,7 +488,7 @@ void iscsit_add_cmd_to_immediate_queue( atomic_set(&conn->check_immediate_queue, 1); spin_unlock_bh(&conn->immed_queue_lock); - wake_up_process(conn->thread_set->tx_thread); + wake_up(&conn->queues_wq); } struct iscsi_queue_req *iscsit_get_cmd_from_immediate_queue(struct iscsi_conn *conn) @@ -562,7 +562,7 @@ void iscsit_add_cmd_to_response_queue( atomic_inc(&cmd->response_queue_count); spin_unlock_bh(&conn->response_queue_lock); - wake_up_process(conn->thread_set->tx_thread); + wake_up(&conn->queues_wq); } struct iscsi_queue_req *iscsit_get_cmd_from_response_queue(struct iscsi_conn *conn) @@ -616,6 +616,24 @@ static void iscsit_remove_cmd_from_response_queue( } } +bool iscsit_conn_all_queues_empty(struct iscsi_conn *conn) +{ + bool empty; + + spin_lock_bh(&conn->immed_queue_lock); + empty = list_empty(&conn->immed_queue_list); + spin_unlock_bh(&conn->immed_queue_lock); + + if (!empty) + return empty; + + spin_lock_bh(&conn->response_queue_lock); + empty = list_empty(&conn->response_queue_list); + spin_unlock_bh(&conn->response_queue_lock); + + return empty; +} + void iscsit_free_queue_reqs_for_conn(struct iscsi_conn *conn) { struct iscsi_queue_req *qr, *qr_tmp; diff --git a/drivers/target/iscsi/iscsi_target_util.h b/drivers/target/iscsi/iscsi_target_util.h index 44054bd35437..894d0f837924 100644 --- a/drivers/target/iscsi/iscsi_target_util.h +++ b/drivers/target/iscsi/iscsi_target_util.h @@ -25,6 +25,7 @@ extern struct iscsi_queue_req *iscsit_get_cmd_from_immediate_queue(struct iscsi_ extern void iscsit_add_cmd_to_response_queue(struct iscsi_cmd *, struct iscsi_conn *, u8); extern struct iscsi_queue_req *iscsit_get_cmd_from_response_queue(struct iscsi_conn *); extern void iscsit_remove_cmd_from_tx_queues(struct iscsi_cmd *, struct iscsi_conn *); +extern bool iscsit_conn_all_queues_empty(struct iscsi_conn *); extern void iscsit_free_queue_reqs_for_conn(struct iscsi_conn *); extern void iscsit_release_cmd(struct iscsi_cmd *); extern void iscsit_free_cmd(struct iscsi_cmd *); -- cgit v1.2.3 From ab74b3d62f05192bf8fb8f169e7999d1183b2e08 Mon Sep 17 00:00:00 2001 From: Steve Hodgson Date: Wed, 31 Oct 2012 10:24:02 -0700 Subject: target: Fix incorrect usage of nested IRQ spinlocks in ABORT_TASK path This patch changes core_tmr_abort_task() to use spin_lock -> spin_unlock around se_cmd->t_state_lock while spin_lock_irqsave is held via se_sess->sess_cmd_lock. Signed-off-by: Steve Hodgson Signed-off-by: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_tmr.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c index 1c59a3c23b2c..be75c4331a92 100644 --- a/drivers/target/target_core_tmr.c +++ b/drivers/target/target_core_tmr.c @@ -140,15 +140,15 @@ void core_tmr_abort_task( printk("ABORT_TASK: Found referenced %s task_tag: %u\n", se_cmd->se_tfo->get_fabric_name(), ref_tag); - spin_lock_irq(&se_cmd->t_state_lock); + spin_lock(&se_cmd->t_state_lock); if (se_cmd->transport_state & CMD_T_COMPLETE) { printk("ABORT_TASK: ref_tag: %u already complete, skipping\n", ref_tag); - spin_unlock_irq(&se_cmd->t_state_lock); + spin_unlock(&se_cmd->t_state_lock); spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); goto out; } se_cmd->transport_state |= CMD_T_ABORTED; - spin_unlock_irq(&se_cmd->t_state_lock); + spin_unlock(&se_cmd->t_state_lock); list_del_init(&se_cmd->se_cmd_list); kref_get(&se_cmd->cmd_kref); -- cgit v1.2.3 From df0cfd6990347c20ae031f3f34137cba274f1972 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 1 Nov 2012 11:33:26 +0100 Subject: HID: hidraw: put old deallocation mechanism in place This basically reverts commit 4fe9f8e203fda. It causes multiple problems, namely: - after rmmod/modprobe cycle of bus driver, the input is not claimed any more. This is likely because of misplaced hid_hw_close() - it causes memory corruption on hidraw_list As original patch author is not responding to requests to fix his patch, and the original deallocation mechanism is not exposing any problems, I am reverting back to it. Signed-off-by: Jiri Kosina --- drivers/hid/hidraw.c | 69 ++++++++++++++++++++++++++++++++-------------------- 1 file changed, 43 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index 17d15bb610d1..7c47fc3f7b2b 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -42,7 +42,6 @@ static struct cdev hidraw_cdev; static struct class *hidraw_class; static struct hidraw *hidraw_table[HIDRAW_MAX_DEVICES]; static DEFINE_MUTEX(minors_lock); -static void drop_ref(struct hidraw *hid, int exists_bit); static ssize_t hidraw_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) { @@ -114,7 +113,7 @@ static ssize_t hidraw_send_report(struct file *file, const char __user *buffer, __u8 *buf; int ret = 0; - if (!hidraw_table[minor] || !hidraw_table[minor]->exist) { + if (!hidraw_table[minor]) { ret = -ENODEV; goto out; } @@ -262,7 +261,7 @@ static int hidraw_open(struct inode *inode, struct file *file) } mutex_lock(&minors_lock); - if (!hidraw_table[minor] || !hidraw_table[minor]->exist) { + if (!hidraw_table[minor]) { err = -ENODEV; goto out_unlock; } @@ -299,12 +298,36 @@ out: static int hidraw_release(struct inode * inode, struct file * file) { unsigned int minor = iminor(inode); + struct hidraw *dev; struct hidraw_list *list = file->private_data; + int ret; + int i; + + mutex_lock(&minors_lock); + if (!hidraw_table[minor]) { + ret = -ENODEV; + goto unlock; + } - drop_ref(hidraw_table[minor], 0); list_del(&list->node); + dev = hidraw_table[minor]; + if (!--dev->open) { + if (list->hidraw->exist) { + hid_hw_power(dev->hid, PM_HINT_NORMAL); + hid_hw_close(dev->hid); + } else { + kfree(list->hidraw); + } + } + + for (i = 0; i < HIDRAW_BUFFER_SIZE; ++i) + kfree(list->buffer[i].value); kfree(list); - return 0; + ret = 0; +unlock: + mutex_unlock(&minors_lock); + + return ret; } static long hidraw_ioctl(struct file *file, unsigned int cmd, @@ -506,7 +529,21 @@ EXPORT_SYMBOL_GPL(hidraw_connect); void hidraw_disconnect(struct hid_device *hid) { struct hidraw *hidraw = hid->hidraw; - drop_ref(hidraw, 1); + + mutex_lock(&minors_lock); + hidraw->exist = 0; + + device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor)); + + hidraw_table[hidraw->minor] = NULL; + + if (hidraw->open) { + hid_hw_close(hid); + wake_up_interruptible(&hidraw->wait); + } else { + kfree(hidraw); + } + mutex_unlock(&minors_lock); } EXPORT_SYMBOL_GPL(hidraw_disconnect); @@ -555,23 +592,3 @@ void hidraw_exit(void) unregister_chrdev_region(dev_id, HIDRAW_MAX_DEVICES); } - -static void drop_ref(struct hidraw *hidraw, int exists_bit) -{ - mutex_lock(&minors_lock); - if (exists_bit) { - hid_hw_close(hidraw->hid); - hidraw->exist = 0; - if (hidraw->open) - wake_up_interruptible(&hidraw->wait); - } else { - --hidraw->open; - } - - if (!hidraw->open && !hidraw->exist) { - device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor)); - hidraw_table[hidraw->minor] = NULL; - kfree(hidraw); - } - mutex_unlock(&minors_lock); -} -- cgit v1.2.3 From 83325d072185899b706de2956170b246585aaec9 Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Wed, 24 Oct 2012 18:29:49 +0200 Subject: DRM/Radeon: Fix Load Detection on legacy primary DAC. An uninitialized variable led to broken load detection. Signed-off-by: Egbert Eich Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 0063df9d166d..f278f20ea12a 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -671,6 +671,7 @@ static enum drm_connector_status radeon_legacy_primary_dac_detect(struct drm_enc tmp |= RADEON_DAC_RANGE_CNTL_PS2 | RADEON_DAC_CMP_EN; WREG32(RADEON_DAC_CNTL, tmp); + tmp = dac_macro_cntl; tmp &= ~(RADEON_DAC_PDWN_R | RADEON_DAC_PDWN_G | RADEON_DAC_PDWN_B); -- cgit v1.2.3 From 9c50b1d937cc9656100ba10d9f57484c6d173936 Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Wed, 24 Oct 2012 18:31:19 +0200 Subject: DRM/Radeon: Fix primary DAC Load Detection for RV100 chips. For Radeon 7500 ATI recommends a DAC_FORCE value of 0x1ac. This value works better on ES1000 (RV100) chips, too, as it doesn't produce any false positives on any cards I have tested. Therefore let's assume that this value is good for all RV100 and RV200 chipset generations. Signed-off-by: Egbert Eich Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index f278f20ea12a..5fdc67bd25d9 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -662,6 +662,8 @@ static enum drm_connector_status radeon_legacy_primary_dac_detect(struct drm_enc if (ASIC_IS_R300(rdev)) tmp |= (0x1b6 << RADEON_DAC_FORCE_DATA_SHIFT); + else if (ASIC_IS_RV100(rdev)) + tmp |= (0x1ac << RADEON_DAC_FORCE_DATA_SHIFT); else tmp |= (0x180 << RADEON_DAC_FORCE_DATA_SHIFT); -- cgit v1.2.3 From fc87f13b8dc73706ae06caf229a336965e9b44a6 Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Wed, 24 Oct 2012 18:32:52 +0200 Subject: DRM/Radeon: On DVI-I use Load Detection when EDID is bogus. The Radeon driver uses the analog/digital flag to determine if the DAC or the TMDS encoder should be enabled on a DVI-I connector. If the EDID is bogus this flag is no longer reliable. This fix adds a fallback to DAC load detection to determine if anything is connected to the DAC. If not and a (bogus) EDID is found it assumes a digital display is connected. This works around problems with some crappy IPMI devices using Radeon ES1000. Signed-off-by: Egbert Eich Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_connectors.c | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 67cfc1795ecd..b884c362a8c2 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -941,7 +941,7 @@ radeon_dvi_detect(struct drm_connector *connector, bool force) struct drm_mode_object *obj; int i; enum drm_connector_status ret = connector_status_disconnected; - bool dret = false; + bool dret = false, broken_edid = false; if (!force && radeon_check_hpd_status_unchanged(connector)) return connector->status; @@ -965,6 +965,9 @@ radeon_dvi_detect(struct drm_connector *connector, bool force) ret = connector_status_disconnected; DRM_ERROR("%s: detected RS690 floating bus bug, stopping ddc detect\n", drm_get_connector_name(connector)); radeon_connector->ddc_bus = NULL; + } else { + ret = connector_status_connected; + broken_edid = true; /* defer use_digital to later */ } } else { radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL); @@ -1047,13 +1050,24 @@ radeon_dvi_detect(struct drm_connector *connector, bool force) encoder_funcs = encoder->helper_private; if (encoder_funcs->detect) { - if (ret != connector_status_connected) { - ret = encoder_funcs->detect(encoder, connector); - if (ret == connector_status_connected) { - radeon_connector->use_digital = false; + if (!broken_edid) { + if (ret != connector_status_connected) { + /* deal with analog monitors without DDC */ + ret = encoder_funcs->detect(encoder, connector); + if (ret == connector_status_connected) { + radeon_connector->use_digital = false; + } + if (ret != connector_status_disconnected) + radeon_connector->detected_by_load = true; } - if (ret != connector_status_disconnected) - radeon_connector->detected_by_load = true; + } else { + enum drm_connector_status lret; + /* assume digital unless load detected otherwise */ + radeon_connector->use_digital = true; + lret = encoder_funcs->detect(encoder, connector); + DRM_DEBUG_KMS("load_detect %x returned: %x\n",encoder->encoder_type,lret); + if (lret == connector_status_connected) + radeon_connector->use_digital = false; } break; } -- cgit v1.2.3 From 74e4ca32a406a15efb24a6a6ecf84b4cdabfd4e7 Mon Sep 17 00:00:00 2001 From: Peter Senna Tschudin Date: Wed, 24 Oct 2012 16:42:26 +0200 Subject: drivers/gpu/drm/radeon/evergreen_cs.c: Remove unnecessary semicolon A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r1@ statement S; position p,p1; @@ S@p1;@p @script:python r2@ p << r1.p; p1 << r1.p1; @@ if p[0].line != p1[0].line_end: cocci.include_match(False) @@ position r1.p; @@ -;@p // Signed-off-by: Peter Senna Tschudin Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/evergreen_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c index 30271b641913..95e6318b6268 100644 --- a/drivers/gpu/drm/radeon/evergreen_cs.c +++ b/drivers/gpu/drm/radeon/evergreen_cs.c @@ -264,7 +264,7 @@ static int evergreen_surface_check_2d(struct radeon_cs_parser *p, /* macro tile width & height */ palign = (8 * surf->bankw * track->npipes) * surf->mtilea; halign = (8 * surf->bankh * surf->nbanks) / surf->mtilea; - mtileb = (palign / 8) * (halign / 8) * tileb;; + mtileb = (palign / 8) * (halign / 8) * tileb; mtile_pr = surf->nbx / palign; mtile_ps = (mtile_pr * surf->nby) / halign; surf->layer_size = mtile_ps * mtileb * slice_pt; -- cgit v1.2.3 From dfdcbebc548ff14fd1a7029c95d060e0dd466469 Mon Sep 17 00:00:00 2001 From: Igor Murzov Date: Thu, 25 Oct 2012 17:09:00 +0400 Subject: drm/radeon: fix ATPX function documentation Fix a copy&pasted documentation. Signed-off-by: Igor Murzov Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_atpx_handler.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c index 37f6a907aea4..15f5ded65e0c 100644 --- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c +++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c @@ -352,9 +352,9 @@ static int radeon_atpx_switchto(enum vga_switcheroo_client_id id) } /** - * radeon_atpx_switchto - switch to the requested GPU + * radeon_atpx_power_state - power down/up the requested GPU * - * @id: GPU to switch to + * @id: GPU to power down/up * @state: requested power state (0 = off, 1 = on) * * Execute the necessary ATPX function to power down/up the discrete GPU -- cgit v1.2.3 From d038db86984977646815fff54c1be11bff6b9f5b Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Tue, 30 Oct 2012 17:42:26 +0100 Subject: DRM/Radeon: Clean up code in TV DAC load detection. Signed-off-by: Egbert Eich Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 5fdc67bd25d9..85a7307e05f8 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -1425,7 +1425,8 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder struct drm_device *dev = encoder->dev; struct radeon_device *rdev = dev->dev_private; uint32_t crtc2_gen_cntl, tv_dac_cntl, dac_cntl2, dac_ext_cntl; - uint32_t disp_hw_debug, disp_output_cntl, gpiopad_a, pixclks_cntl, tmp; + uint32_t gpiopad_a = 0, pixclks_cntl, tmp; + uint32_t disp_output_cntl = 0, disp_hw_debug = 0; enum drm_connector_status found = connector_status_disconnected; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct radeon_encoder_tv_dac *tv_dac = radeon_encoder->enc_priv; @@ -1464,9 +1465,12 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder /* save the regs we need */ pixclks_cntl = RREG32_PLL(RADEON_PIXCLKS_CNTL); - gpiopad_a = ASIC_IS_R300(rdev) ? RREG32(RADEON_GPIOPAD_A) : 0; - disp_output_cntl = ASIC_IS_R300(rdev) ? RREG32(RADEON_DISP_OUTPUT_CNTL) : 0; - disp_hw_debug = ASIC_IS_R300(rdev) ? 0 : RREG32(RADEON_DISP_HW_DEBUG); + if (ASIC_IS_R300(rdev)) { + gpiopad_a = RREG32(RADEON_GPIOPAD_A); + disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL); + } else { + disp_hw_debug = RREG32(RADEON_DISP_HW_DEBUG); + } crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL); tv_dac_cntl = RREG32(RADEON_TV_DAC_CNTL); dac_ext_cntl = RREG32(RADEON_DAC_EXT_CNTL); @@ -1476,16 +1480,13 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder | RADEON_PIX2CLK_DAC_ALWAYS_ONb); WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp); - if (ASIC_IS_R300(rdev)) - WREG32_P(RADEON_GPIOPAD_A, 1, ~1); - tmp = crtc2_gen_cntl & ~RADEON_CRTC2_PIX_WIDTH_MASK; tmp |= RADEON_CRTC2_CRT2_ON | (2 << RADEON_CRTC2_PIX_WIDTH_SHIFT); - WREG32(RADEON_CRTC2_GEN_CNTL, tmp); if (ASIC_IS_R300(rdev)) { + WREG32_P(RADEON_GPIOPAD_A, 1, ~1); tmp = disp_output_cntl & ~RADEON_DISP_TVDAC_SOURCE_MASK; tmp |= RADEON_DISP_TVDAC_SOURCE_CRTC2; WREG32(RADEON_DISP_OUTPUT_CNTL, tmp); @@ -1541,6 +1542,7 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder } else { WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug); } + WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl); return found; -- cgit v1.2.3 From 701337dc2711096e5288430599dcf07aac5876ab Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Tue, 30 Oct 2012 17:42:27 +0100 Subject: DRM/Radeon: Fix TV DAC Load Detection for single CRTC chips. The RN50 has a TV DAC but only a single CRTC. For load detection this DAC is controlled by the primary CRTC. Signed-off-by: Egbert Eich Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 62 +++++++++++++++---------- 1 file changed, 38 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 85a7307e05f8..3afed70306df 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -1424,9 +1424,9 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder { struct drm_device *dev = encoder->dev; struct radeon_device *rdev = dev->dev_private; - uint32_t crtc2_gen_cntl, tv_dac_cntl, dac_cntl2, dac_ext_cntl; + uint32_t crtc2_gen_cntl = 0, tv_dac_cntl, dac_cntl2, dac_ext_cntl; uint32_t gpiopad_a = 0, pixclks_cntl, tmp; - uint32_t disp_output_cntl = 0, disp_hw_debug = 0; + uint32_t disp_output_cntl = 0, disp_hw_debug = 0, crtc_ext_cntl = 0; enum drm_connector_status found = connector_status_disconnected; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct radeon_encoder_tv_dac *tv_dac = radeon_encoder->enc_priv; @@ -1465,13 +1465,18 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder /* save the regs we need */ pixclks_cntl = RREG32_PLL(RADEON_PIXCLKS_CNTL); - if (ASIC_IS_R300(rdev)) { - gpiopad_a = RREG32(RADEON_GPIOPAD_A); - disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL); + + if (rdev->flags & RADEON_SINGLE_CRTC) { + crtc_ext_cntl = RREG32(RADEON_CRTC_EXT_CNTL); } else { - disp_hw_debug = RREG32(RADEON_DISP_HW_DEBUG); + if (ASIC_IS_R300(rdev)) { + gpiopad_a = RREG32(RADEON_GPIOPAD_A); + disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL); + } else { + disp_hw_debug = RREG32(RADEON_DISP_HW_DEBUG); + } + crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL); } - crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL); tv_dac_cntl = RREG32(RADEON_TV_DAC_CNTL); dac_ext_cntl = RREG32(RADEON_DAC_EXT_CNTL); dac_cntl2 = RREG32(RADEON_DAC_CNTL2); @@ -1480,19 +1485,24 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder | RADEON_PIX2CLK_DAC_ALWAYS_ONb); WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp); - tmp = crtc2_gen_cntl & ~RADEON_CRTC2_PIX_WIDTH_MASK; - tmp |= RADEON_CRTC2_CRT2_ON | - (2 << RADEON_CRTC2_PIX_WIDTH_SHIFT); - WREG32(RADEON_CRTC2_GEN_CNTL, tmp); - - if (ASIC_IS_R300(rdev)) { - WREG32_P(RADEON_GPIOPAD_A, 1, ~1); - tmp = disp_output_cntl & ~RADEON_DISP_TVDAC_SOURCE_MASK; - tmp |= RADEON_DISP_TVDAC_SOURCE_CRTC2; - WREG32(RADEON_DISP_OUTPUT_CNTL, tmp); + if (rdev->flags & RADEON_SINGLE_CRTC) { + tmp = crtc_ext_cntl | RADEON_CRTC_CRT_ON; + WREG32(RADEON_CRTC_EXT_CNTL, tmp); } else { - tmp = disp_hw_debug & ~RADEON_CRT2_DISP1_SEL; - WREG32(RADEON_DISP_HW_DEBUG, tmp); + tmp = crtc2_gen_cntl & ~RADEON_CRTC2_PIX_WIDTH_MASK; + tmp |= RADEON_CRTC2_CRT2_ON | + (2 << RADEON_CRTC2_PIX_WIDTH_SHIFT); + WREG32(RADEON_CRTC2_GEN_CNTL, tmp); + + if (ASIC_IS_R300(rdev)) { + WREG32_P(RADEON_GPIOPAD_A, 1, ~1); + tmp = disp_output_cntl & ~RADEON_DISP_TVDAC_SOURCE_MASK; + tmp |= RADEON_DISP_TVDAC_SOURCE_CRTC2; + WREG32(RADEON_DISP_OUTPUT_CNTL, tmp); + } else { + tmp = disp_hw_debug & ~RADEON_CRT2_DISP1_SEL; + WREG32(RADEON_DISP_HW_DEBUG, tmp); + } } tmp = RADEON_TV_DAC_NBLANK | @@ -1534,13 +1544,17 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder WREG32(RADEON_DAC_CNTL2, dac_cntl2); WREG32(RADEON_DAC_EXT_CNTL, dac_ext_cntl); WREG32(RADEON_TV_DAC_CNTL, tv_dac_cntl); - WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl); - if (ASIC_IS_R300(rdev)) { - WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl); - WREG32_P(RADEON_GPIOPAD_A, gpiopad_a, ~1); + if (rdev->flags & RADEON_SINGLE_CRTC) { + WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl); } else { - WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug); + WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl); + if (ASIC_IS_R300(rdev)) { + WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl); + WREG32_P(RADEON_GPIOPAD_A, gpiopad_a, ~1); + } else { + WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug); + } } WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl); -- cgit v1.2.3 From f8c4d701ae3477f41fdc95592caa476617988a53 Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Mon, 29 Oct 2012 13:46:48 +0100 Subject: DRM/radeon: For single CRTC GPUs move handling of CRTC_CRT_ON to crtc_dpms(). On all dual CRTC GPUs the CRTC_CRT_ON in the RADEON_CRTC_EXT_CNTL register controls the CRTC of the primary DAC. Therefore it is set in the DAC DMPS function. This is different for GPU's with a single CRTC but a primary and a TV DAC: here it controls the single CRTC no matter where it is routed. Therefore we set it here. This avoids an elaborate on/off state tracking since both primary_dac_dpms() and tv_dac_dpms() functions would have to touch this bit. On single CRTC GPUs with just one DAC it's irrelevant where this bit is handled. agd5f: fix warning Signed-off-by: Egbert Eich Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 15 +++++++++++++-- drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 7 +++++-- 2 files changed, 18 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index 5677a424b585..6857cb4efb76 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -295,6 +295,7 @@ static void radeon_crtc_dpms(struct drm_crtc *crtc, int mode) struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; + uint32_t crtc_ext_cntl = 0; uint32_t mask; if (radeon_crtc->crtc_id) @@ -307,6 +308,16 @@ static void radeon_crtc_dpms(struct drm_crtc *crtc, int mode) RADEON_CRTC_VSYNC_DIS | RADEON_CRTC_HSYNC_DIS); + /* + * On all dual CRTC GPUs this bit controls the CRTC of the primary DAC. + * Therefore it is set in the DAC DMPS function. + * This is different for GPU's with a single CRTC but a primary and a + * TV DAC: here it controls the single CRTC no matter where it is + * routed. Therefore we set it here. + */ + if (rdev->flags & RADEON_SINGLE_CRTC) + crtc_ext_cntl = RADEON_CRTC_CRT_ON; + switch (mode) { case DRM_MODE_DPMS_ON: radeon_crtc->enabled = true; @@ -317,7 +328,7 @@ static void radeon_crtc_dpms(struct drm_crtc *crtc, int mode) else { WREG32_P(RADEON_CRTC_GEN_CNTL, RADEON_CRTC_EN, ~(RADEON_CRTC_EN | RADEON_CRTC_DISP_REQ_EN_B)); - WREG32_P(RADEON_CRTC_EXT_CNTL, 0, ~mask); + WREG32_P(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl, ~(mask | crtc_ext_cntl)); } drm_vblank_post_modeset(dev, radeon_crtc->crtc_id); radeon_crtc_load_lut(crtc); @@ -331,7 +342,7 @@ static void radeon_crtc_dpms(struct drm_crtc *crtc, int mode) else { WREG32_P(RADEON_CRTC_GEN_CNTL, RADEON_CRTC_DISP_REQ_EN_B, ~(RADEON_CRTC_EN | RADEON_CRTC_DISP_REQ_EN_B)); - WREG32_P(RADEON_CRTC_EXT_CNTL, mask, ~mask); + WREG32_P(RADEON_CRTC_EXT_CNTL, mask, ~(mask | crtc_ext_cntl)); } radeon_crtc->enabled = false; /* adjust pm to dpms changes AFTER disabling crtcs */ diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 3afed70306df..817392fc2d04 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -537,7 +537,9 @@ static void radeon_legacy_primary_dac_dpms(struct drm_encoder *encoder, int mode break; } - WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl); + /* handled in radeon_crtc_dpms() */ + if (!(rdev->flags & RADEON_SINGLE_CRTC)) + WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl); WREG32(RADEON_DAC_CNTL, dac_cntl); WREG32(RADEON_DAC_MACRO_CNTL, dac_macro_cntl); @@ -1095,7 +1097,8 @@ static void radeon_legacy_tv_dac_dpms(struct drm_encoder *encoder, int mode) } else { if (is_tv) WREG32(RADEON_TV_MASTER_CNTL, tv_master_cntl); - else + /* handled in radeon_crtc_dpms() */ + else if (!(rdev->flags & RADEON_SINGLE_CRTC)) WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl); WREG32(RADEON_TV_DAC_CNTL, tv_dac_cntl); } -- cgit v1.2.3 From 6d9cdfc27115b5d4a32906b25a6b2f89920b0366 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 31 Oct 2012 11:51:03 -0400 Subject: drm/radeon: add load detection support for ext DAC on R200 (v2) The R200 asics use an external DAC for the secondary DAC. The current KMS code tries to use code for the integrated TV DAC for R200 which leads to unpredictable results since R200 does not have an integrated TV DAC. This patch ports the external DAC load detection support from the UMS driver to KMS. v2: fix typo in loop break logic Signed-off-by: Alex Deucher Reviewed-by: Egbert Eich --- drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 97 +++++++++++++++++++++++++ 1 file changed, 97 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 817392fc2d04..f5ba2241dacc 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -1422,6 +1422,96 @@ static bool radeon_legacy_tv_detect(struct drm_encoder *encoder, return found; } +static bool radeon_legacy_ext_dac_detect(struct drm_encoder *encoder, + struct drm_connector *connector) +{ + struct drm_device *dev = encoder->dev; + struct radeon_device *rdev = dev->dev_private; + uint32_t gpio_monid, fp2_gen_cntl, disp_output_cntl, crtc2_gen_cntl; + uint32_t disp_lin_trans_grph_a, disp_lin_trans_grph_b, disp_lin_trans_grph_c; + uint32_t disp_lin_trans_grph_d, disp_lin_trans_grph_e, disp_lin_trans_grph_f; + uint32_t tmp, crtc2_h_total_disp, crtc2_v_total_disp; + uint32_t crtc2_h_sync_strt_wid, crtc2_v_sync_strt_wid; + bool found = false; + int i; + + /* save the regs we need */ + gpio_monid = RREG32(RADEON_GPIO_MONID); + fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL); + disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL); + crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL); + disp_lin_trans_grph_a = RREG32(RADEON_DISP_LIN_TRANS_GRPH_A); + disp_lin_trans_grph_b = RREG32(RADEON_DISP_LIN_TRANS_GRPH_B); + disp_lin_trans_grph_c = RREG32(RADEON_DISP_LIN_TRANS_GRPH_C); + disp_lin_trans_grph_d = RREG32(RADEON_DISP_LIN_TRANS_GRPH_D); + disp_lin_trans_grph_e = RREG32(RADEON_DISP_LIN_TRANS_GRPH_E); + disp_lin_trans_grph_f = RREG32(RADEON_DISP_LIN_TRANS_GRPH_F); + crtc2_h_total_disp = RREG32(RADEON_CRTC2_H_TOTAL_DISP); + crtc2_v_total_disp = RREG32(RADEON_CRTC2_V_TOTAL_DISP); + crtc2_h_sync_strt_wid = RREG32(RADEON_CRTC2_H_SYNC_STRT_WID); + crtc2_v_sync_strt_wid = RREG32(RADEON_CRTC2_V_SYNC_STRT_WID); + + tmp = RREG32(RADEON_GPIO_MONID); + tmp &= ~RADEON_GPIO_A_0; + WREG32(RADEON_GPIO_MONID, tmp); + + WREG32(RADEON_FP2_GEN_CNTL, (RADEON_FP2_ON | + RADEON_FP2_PANEL_FORMAT | + R200_FP2_SOURCE_SEL_TRANS_UNIT | + RADEON_FP2_DVO_EN | + R200_FP2_DVO_RATE_SEL_SDR)); + + WREG32(RADEON_DISP_OUTPUT_CNTL, (RADEON_DISP_DAC_SOURCE_RMX | + RADEON_DISP_TRANS_MATRIX_GRAPHICS)); + + WREG32(RADEON_CRTC2_GEN_CNTL, (RADEON_CRTC2_EN | + RADEON_CRTC2_DISP_REQ_EN_B)); + + WREG32(RADEON_DISP_LIN_TRANS_GRPH_A, 0x00000000); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_B, 0x000003f0); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_C, 0x00000000); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_D, 0x000003f0); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_E, 0x00000000); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_F, 0x000003f0); + + WREG32(RADEON_CRTC2_H_TOTAL_DISP, 0x01000008); + WREG32(RADEON_CRTC2_H_SYNC_STRT_WID, 0x00000800); + WREG32(RADEON_CRTC2_V_TOTAL_DISP, 0x00080001); + WREG32(RADEON_CRTC2_V_SYNC_STRT_WID, 0x00000080); + + for (i = 0; i < 200; i++) { + tmp = RREG32(RADEON_GPIO_MONID); + if (tmp & RADEON_GPIO_Y_0) + found = true; + + if (found) + break; + + if (!drm_can_sleep()) + mdelay(1); + else + msleep(1); + } + + /* restore the regs we used */ + WREG32(RADEON_DISP_LIN_TRANS_GRPH_A, disp_lin_trans_grph_a); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_B, disp_lin_trans_grph_b); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_C, disp_lin_trans_grph_c); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_D, disp_lin_trans_grph_d); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_E, disp_lin_trans_grph_e); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_F, disp_lin_trans_grph_f); + WREG32(RADEON_CRTC2_H_TOTAL_DISP, crtc2_h_total_disp); + WREG32(RADEON_CRTC2_V_TOTAL_DISP, crtc2_v_total_disp); + WREG32(RADEON_CRTC2_H_SYNC_STRT_WID, crtc2_h_sync_strt_wid); + WREG32(RADEON_CRTC2_V_SYNC_STRT_WID, crtc2_v_sync_strt_wid); + WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl); + WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl); + WREG32(RADEON_FP2_GEN_CNTL, fp2_gen_cntl); + WREG32(RADEON_GPIO_MONID, gpio_monid); + + return found; +} + static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector) { @@ -1466,6 +1556,13 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder return connector_status_disconnected; } + /* R200 uses an external DAC for secondary DAC */ + if (rdev->family == CHIP_R200) { + if (radeon_legacy_ext_dac_detect(encoder, connector)) + found = connector_status_connected; + return found; + } + /* save the regs we need */ pixclks_cntl = RREG32_PLL(RADEON_PIXCLKS_CNTL); -- cgit v1.2.3 From 50f8d35de8ba4af311ea1176c534e8b73bb198e5 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Wed, 31 Oct 2012 22:30:54 +0000 Subject: ixgbe: PTP get_ts_info missing software support This patch corrects the ethtool get_ts_info functon which did not state that software timestamping was supported, even though it is. Signed-off-by: Jacob Keller CC: Stable [3.5] Tested-by: Stephen Ko Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 56b20d17d0e4..116f0e901bee 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -2673,6 +2673,9 @@ static int ixgbe_get_ts_info(struct net_device *dev, case ixgbe_mac_X540: case ixgbe_mac_82599EB: info->so_timestamping = + SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_RX_SOFTWARE | + SOF_TIMESTAMPING_SOFTWARE | SOF_TIMESTAMPING_TX_HARDWARE | SOF_TIMESTAMPING_RX_HARDWARE | SOF_TIMESTAMPING_RAW_HARDWARE; -- cgit v1.2.3 From b457bcb97212c38154d941d88c13f5f63f3620d0 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 31 Oct 2012 05:46:52 +0000 Subject: bnx2x: Fix 57810 1G-KR link against certain switches. Fix 1G KR link by restoring CL72 misc control register to default value rather than 0. Signed-off-by: Yaniv Rosner Signed-off-by: Barak Witkowski Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index e2e45ee5df33..290e12a8d024 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -3545,12 +3545,11 @@ static void bnx2x_warpcore_set_lpi_passthrough(struct bnx2x_phy *phy, static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, struct link_params *params, struct link_vars *vars) { - u16 val16 = 0, lane, i; + u16 val16 = 0, lane, i, cl72_ctrl; struct bnx2x *bp = params->bp; static struct bnx2x_reg_set reg_set[] = { {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7}, {MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 0}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, 0}, {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0xff}, {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0x5555}, {MDIO_PMA_DEVAD, MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0x0}, @@ -3565,6 +3564,13 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, reg_set[i].val); + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, &cl72_ctrl); + cl72_ctrl &= 0xf8ff; + cl72_ctrl |= 0x3800; + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, cl72_ctrl); + /* Check adding advertisement for 1G KX */ if (((vars->line_speed == SPEED_AUTO_NEG) && (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || -- cgit v1.2.3 From a75bb0010026f39910cd01d33a5baa47191539a0 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 31 Oct 2012 05:46:53 +0000 Subject: bnx2x: Fix link down in 57712 following LFA In case of link flap avoidance between PXE boot and bnx2x, set the appropriate PHY DEVAD even if LFA kicks in. Signed-off-by: Yaniv Rosner Signed-off-by: Barak Witkowski Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 290e12a8d024..f2436ea641a6 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -3295,6 +3295,21 @@ static void bnx2x_serdes_deassert(struct bnx2x *bp, u8 port) DEFAULT_PHY_DEV_ADDR); } +static void bnx2x_xgxs_specific_func(struct bnx2x_phy *phy, + struct link_params *params, + u32 action) +{ + struct bnx2x *bp = params->bp; + switch (action) { + case PHY_INIT: + /* Set correct devad */ + REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + params->port*0x18, 0); + REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + params->port*0x18, + phy->def_md_devad); + break; + } +} + static void bnx2x_xgxs_deassert(struct link_params *params) { struct bnx2x *bp = params->bp; @@ -3309,10 +3324,8 @@ static void bnx2x_xgxs_deassert(struct link_params *params) REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, val); udelay(500); REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val); - - REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + port*0x18, 0); - REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, - params->phy[INT_PHY].def_md_devad); + bnx2x_xgxs_specific_func(¶ms->phy[INT_PHY], params, + PHY_INIT); } static void bnx2x_calc_ieee_aneg_adv(struct bnx2x_phy *phy, @@ -10999,7 +11012,7 @@ static struct bnx2x_phy phy_xgxs = { .format_fw_ver = (format_fw_ver_t)NULL, .hw_reset = (hw_reset_t)NULL, .set_link_led = (set_link_led_t)NULL, - .phy_specific_func = (phy_specific_func_t)NULL + .phy_specific_func = (phy_specific_func_t)bnx2x_xgxs_specific_func }; static struct bnx2x_phy phy_warpcore = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT, -- cgit v1.2.3 From cd1a26a3bbc797100c55594bac0546204ccb1107 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 31 Oct 2012 05:46:54 +0000 Subject: bnx2x: Restore global registers back to default. Several KR registers were not set correctly back to default after loopback test, so set those global registers over the global WC lane (zero) rather than the current lane. Signed-off-by: Yaniv Rosner Signed-off-by: Barak Witkowski Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 78 +++++++++++++++++------- 1 file changed, 56 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index f2436ea641a6..5e8f7b7a8f65 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -3558,13 +3558,11 @@ static void bnx2x_warpcore_set_lpi_passthrough(struct bnx2x_phy *phy, static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, struct link_params *params, struct link_vars *vars) { - u16 val16 = 0, lane, i, cl72_ctrl; + u16 lane, i, cl72_ctrl, an_adv = 0; + u16 ucode_ver; struct bnx2x *bp = params->bp; static struct bnx2x_reg_set reg_set[] = { {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7}, - {MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 0}, - {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0xff}, - {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0x5555}, {MDIO_PMA_DEVAD, MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0x0}, {MDIO_WC_DEVAD, MDIO_WC_REG_RX66_CONTROL, 0x7415}, {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x6190}, @@ -3589,7 +3587,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || (vars->line_speed == SPEED_1000)) { u32 addr = MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2; - val16 |= (1<<5); + an_adv |= (1<<5); /* Enable CL37 1G Parallel Detect */ bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, addr, 0x1); @@ -3599,11 +3597,14 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) || (vars->line_speed == SPEED_10000)) { /* Check adding advertisement for 10G KR */ - val16 |= (1<<7); + an_adv |= (1<<7); /* Enable 10G Parallel Detect */ + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 1); - + bnx2x_set_aer_mmd(params, phy); DP(NETIF_MSG_LINK, "Advertize 10G\n"); } @@ -3623,7 +3624,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, /* Advertised speeds */ bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, - MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, val16); + MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, an_adv); /* Advertised and set FEC (Forward Error Correction) */ bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, @@ -3647,9 +3648,10 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, /* Set KR Autoneg Work-Around flag for Warpcore version older than D108 */ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_UC_INFO_B1_VERSION, &val16); - if (val16 < 0xd108) { - DP(NETIF_MSG_LINK, "Enable AN KR work-around\n"); + MDIO_WC_REG_UC_INFO_B1_VERSION, &ucode_ver); + if (ucode_ver < 0xd108) { + DP(NETIF_MSG_LINK, "Enable AN KR work-around. WC ver:0x%x\n", + ucode_ver); vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY; } bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, @@ -3670,21 +3672,16 @@ static void bnx2x_warpcore_set_10G_KR(struct bnx2x_phy *phy, struct link_vars *vars) { struct bnx2x *bp = params->bp; - u16 i; + u16 val16, i, lane; static struct bnx2x_reg_set reg_set[] = { /* Disable Autoneg */ {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7}, - {MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 0}, {MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, 0x3f00}, {MDIO_AN_DEVAD, MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, 0}, {MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x0}, {MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL3_UP1, 0x1}, {MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL5_MISC7, 0xa}, - /* Disable CL36 PCS Tx */ - {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0x0}, - /* Double Wide Single Data Rate @ pll rate */ - {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0xFFFF}, /* Leave cl72 training enable, needed for KR */ {MDIO_PMA_DEVAD, MDIO_WC_REG_PMD_IEEE9BLK_TENGBASE_KR_PMD_CONTROL_REGISTER_150, @@ -3695,11 +3692,24 @@ static void bnx2x_warpcore_set_10G_KR(struct bnx2x_phy *phy, bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, reg_set[i].val); - /* Leave CL72 enabled */ - bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, - 0x3800); + lane = bnx2x_get_warpcore_lane(phy, params); + /* Global registers */ + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + /* Disable CL36 PCS Tx */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16); + val16 &= ~(0x0011 << lane); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16); + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16); + val16 |= (0x0303 << (lane << 1)); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16); + /* Restore AER */ + bnx2x_set_aer_mmd(params, phy); /* Set speed via PMA/PMD register */ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x2040); @@ -4322,7 +4332,7 @@ static void bnx2x_warpcore_link_reset(struct bnx2x_phy *phy, struct link_params *params) { struct bnx2x *bp = params->bp; - u16 val16; + u16 val16, lane; bnx2x_sfp_e3_set_transmitter(params, phy, 0); bnx2x_set_mdio_clk(bp, params->chip_id, params->port); bnx2x_set_aer_mmd(params, phy); @@ -4359,6 +4369,30 @@ static void bnx2x_warpcore_link_reset(struct bnx2x_phy *phy, MDIO_WC_REG_XGXSBLK1_LANECTRL2, val16 & 0xff00); + lane = bnx2x_get_warpcore_lane(phy, params); + /* Disable CL36 PCS Tx */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16); + val16 |= (0x11 << lane); + if (phy->flags & FLAGS_WC_DUAL_MODE) + val16 |= (0x22 << lane); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16); + + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16); + val16 &= ~(0x0303 << (lane << 1)); + val16 |= (0x0101 << (lane << 1)); + if (phy->flags & FLAGS_WC_DUAL_MODE) { + val16 &= ~(0x0c0c << (lane << 1)); + val16 |= (0x0404 << (lane << 1)); + } + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16); + /* Restore AER */ + bnx2x_set_aer_mmd(params, phy); + } static void bnx2x_set_warpcore_loopback(struct bnx2x_phy *phy, -- cgit v1.2.3 From 4978140c38958b15b3b95a49bda688723fa014eb Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 31 Oct 2012 05:46:55 +0000 Subject: bnx2x: Fix potential incorrect link speed provision Fix possible incorrect link speed provision following rapid link speed change. Clear link speed mask after each link change, and not only after link down. Signed-off-by: Yaniv Rosner Signed-off-by: Barak Witkowski Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 5e8f7b7a8f65..308ba42dfd56 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -137,7 +137,16 @@ #define LINK_20GTFD LINK_STATUS_SPEED_AND_DUPLEX_20GTFD #define LINK_20GXFD LINK_STATUS_SPEED_AND_DUPLEX_20GXFD - +#define LINK_UPDATE_MASK \ + (LINK_STATUS_SPEED_AND_DUPLEX_MASK | \ + LINK_STATUS_LINK_UP | \ + LINK_STATUS_PHYSICAL_LINK_FLAG | \ + LINK_STATUS_AUTO_NEGOTIATE_COMPLETE | \ + LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK | \ + LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK | \ + LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK | \ + LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE | \ + LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE) #define SFP_EEPROM_CON_TYPE_ADDR 0x2 #define SFP_EEPROM_CON_TYPE_VAL_LC 0x7 @@ -6349,15 +6358,7 @@ static int bnx2x_update_link_down(struct link_params *params, vars->mac_type = MAC_TYPE_NONE; /* Update shared memory */ - vars->link_status &= ~(LINK_STATUS_SPEED_AND_DUPLEX_MASK | - LINK_STATUS_LINK_UP | - LINK_STATUS_PHYSICAL_LINK_FLAG | - LINK_STATUS_AUTO_NEGOTIATE_COMPLETE | - LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK | - LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK | - LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK | - LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE | - LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE); + vars->link_status &= ~LINK_UPDATE_MASK; vars->line_speed = 0; bnx2x_update_mng(params, vars->link_status); @@ -6505,6 +6506,7 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars) u16 ext_phy_line_speed = 0, prev_line_speed = vars->line_speed; u8 active_external_phy = INT_PHY; vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG; + vars->link_status &= ~LINK_UPDATE_MASK; for (phy_index = INT_PHY; phy_index < params->num_phys; phy_index++) { phy_vars[phy_index].flow_ctrl = 0; -- cgit v1.2.3 From e82041df5d0a85457880fbbe00da057443b3fcc0 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 31 Oct 2012 05:46:56 +0000 Subject: bnx2x: Fix unrecognized SFP+ module after driver is loaded When SFP+ module is plugged in after driver is already loaded, it may not be recognized, so set SFP module recognition time up to 300ms, without resetting the module power in the middle. Signed-off-by: Yaniv Rosner Signed-off-by: Barak Witkowski Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 308ba42dfd56..679d45e09805 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -7634,7 +7634,7 @@ static void bnx2x_warpcore_power_module(struct link_params *params, static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, struct link_params *params, u16 addr, u8 byte_cnt, - u8 *o_buf) + u8 *o_buf, u8 is_init) { int rc = 0; u8 i, j = 0, cnt = 0; @@ -7651,10 +7651,10 @@ static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, /* 4 byte aligned address */ addr32 = addr & (~0x3); do { - if (cnt == I2C_WA_PWR_ITER) { + if ((!is_init) && (cnt == I2C_WA_PWR_ITER)) { bnx2x_warpcore_power_module(params, phy, 0); /* Note that 100us are not enough here */ - usleep_range(1000,1000); + usleep_range(1000, 2000); bnx2x_warpcore_power_module(params, phy, 1); } rc = bnx2x_bsc_read(params, phy, 0xa0, addr32, 0, byte_cnt, @@ -7774,7 +7774,7 @@ int bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy, break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: rc = bnx2x_warpcore_read_sfp_module_eeprom(phy, params, addr, - byte_cnt, o_buf); + byte_cnt, o_buf, 0); break; } return rc; @@ -7978,6 +7978,7 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy, { u8 val; + int rc; struct bnx2x *bp = params->bp; u16 timeout; /* Initialization time after hot-plug may take up to 300ms for @@ -7985,8 +7986,14 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy, */ for (timeout = 0; timeout < 60; timeout++) { - if (bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val) - == 0) { + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) + rc = bnx2x_warpcore_read_sfp_module_eeprom(phy, + params, 1, + 1, &val, 1); + else + rc = bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, + &val); + if (rc == 0) { DP(NETIF_MSG_LINK, "SFP+ module initialization took %d ms\n", timeout * 5); @@ -7994,7 +8001,8 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy, } usleep_range(5000, 10000); } - return -EINVAL; + rc = bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val); + return rc; } static void bnx2x_8727_power_module(struct bnx2x *bp, -- cgit v1.2.3 From 03c31488a084b344cd04bb853db97706143327b9 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 31 Oct 2012 05:46:57 +0000 Subject: bnx2x: Fix no link on 577xx 10G-baseT Since the Warpcore supports various link types, need to set only the correct supported modes for XFI which is the serdes interface for the 10G-baseT PHY. Signed-off-by: Yaniv Rosner Signed-off-by: Barak Witkowski Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 679d45e09805..6dd0dd076cc5 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -11528,6 +11528,11 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port, phy->media_type = ETH_PHY_BASE_T; break; case PORT_HW_CFG_NET_SERDES_IF_XFI: + phy->supported &= (SUPPORTED_1000baseT_Full | + SUPPORTED_10000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); phy->media_type = ETH_PHY_XFP_FIBER; break; case PORT_HW_CFG_NET_SERDES_IF_SFI: -- cgit v1.2.3 From 477864ddd36510e9802c2adb6d9445c2d7783fe5 Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Wed, 31 Oct 2012 05:46:58 +0000 Subject: bnx2x: Disable FCoE for 57840 since not yet supported by FW Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index d5648fc666bd..f23e8c022954 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -11902,7 +11902,15 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, /* disable FCOE L2 queue for E1x */ if (CHIP_IS_E1x(bp)) bp->flags |= NO_FCOE_FLAG; - + /* disable FCOE for 57840 device, until FW supports it */ + switch (ent->driver_data) { + case BCM57840_O: + case BCM57840_4_10: + case BCM57840_2_20: + case BCM57840_MFO: + case BCM57840_MF: + bp->flags |= NO_FCOE_FLAG; + } #endif -- cgit v1.2.3 From eb6e98a1b25fb0f347fece9814257a9e1cb537c8 Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Wed, 31 Oct 2012 04:42:51 +0000 Subject: bonding: fix off-by-one error Fix off-by-one error because IFNAMSIZ == 16 and when this code gets executed we stick a NULL byte where we should not. How to reproduce: with CONFIG_CC_STACKPROTECTOR=y (otherwise it may pass by silently) modprobe bonding; echo 1 > /sys/class/net/bond0/bonding/mode; echo "AAAAAAAAAAAAAAAA" > /sys/class/net/bond0/bonding/primary; Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- drivers/net/bonding/bond_sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index dc15d248443f..238d9b3e2252 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -1060,7 +1060,7 @@ static ssize_t bonding_store_primary(struct device *d, goto out; } - sscanf(buf, "%16s", ifname); /* IFNAMSIZ */ + sscanf(buf, "%15s", ifname); /* IFNAMSIZ */ /* check to see if we are clearing primary */ if (!strlen(ifname) || buf[0] == '\n') { -- cgit v1.2.3 From c84e1590d149cfc885062e938944941f33e69f38 Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Wed, 31 Oct 2012 06:03:52 +0000 Subject: bonding: fix second off-by-one error Fix off-by-one error because IFNAMSIZ == 16 and when this code gets executed we stick a NULL byte where we should not. How to reproduce: with CONFIG_CC_STACKPROTECTOR=y (otherwise it may pass by silently) modprobe bonding; echo 1 > /sys/class/net/bond0/bonding/mode; echo "AAAAAAAAAAAAAAAA" > /sys/class/net/bond0/bonding/active_slave; Signed-off-by: Nikolay Aleksandrov Note: Sorry for the second patch but I missed this one while checking the file. You can squash them into one patch. Signed-off-by: David S. Miller --- drivers/net/bonding/bond_sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 238d9b3e2252..ef8d2a080d17 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -1237,7 +1237,7 @@ static ssize_t bonding_store_active_slave(struct device *d, goto out; } - sscanf(buf, "%16s", ifname); /* IFNAMSIZ */ + sscanf(buf, "%15s", ifname); /* IFNAMSIZ */ /* check to see if we are clearing active */ if (!strlen(ifname) || buf[0] == '\n') { -- cgit v1.2.3 From eaa7cc60f7dff5e74ef387ace8228235fab8241b Mon Sep 17 00:00:00 2001 From: Jamie Lentin Date: Thu, 1 Nov 2012 23:55:43 +0000 Subject: hwmon: Only include of_match_table with CONFIG_OF_GPIO The following fixes build errors on sparc. Without any DT support, of_match_ptr is NULL and the below is a no-op. However, if just CONFIG_OF is defined then so is of_match_ptr. All useful parts of the gpio-fan DT support rely on CONFIG_OF_GPIO anyway, so of_match_table should too. Signed-off-by: Jamie Lentin Signed-off-by: Guenter Roeck --- drivers/hwmon/gpio-fan.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c index 36509ae32083..1381a2e3bbd4 100644 --- a/drivers/hwmon/gpio-fan.c +++ b/drivers/hwmon/gpio-fan.c @@ -630,7 +630,9 @@ static struct platform_driver gpio_fan_driver = { .driver = { .name = "gpio-fan", .pm = GPIO_FAN_PM, +#ifdef CONFIG_OF_GPIO .of_match_table = of_match_ptr(of_gpio_fan_match), +#endif }, }; -- cgit v1.2.3 From 3916e1d71b62b120888aa50bcc8d9a6200fc19a7 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 1 Nov 2012 13:47:09 +1000 Subject: drm/udl: fix stride issues scanning out stride != width*bpp When buffer sharing with the i915 and using a 1680x1050 monitor, the i915 gives is a 6912 buffer for the 6720 width, the code doesn't render this properly as it uses one value to set the base address for reading from the vmap and for where to start on the device. This fixes it by calculating the values correctly for the device and for the pixmap. No idea how I haven't seen this before now. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/udl/udl_drv.h | 2 +- drivers/gpu/drm/udl/udl_fb.c | 12 +++++++----- drivers/gpu/drm/udl/udl_transfer.c | 5 +++-- 3 files changed, 11 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/udl/udl_drv.h b/drivers/gpu/drm/udl/udl_drv.h index fccd361f7b50..87aa5f5d3c88 100644 --- a/drivers/gpu/drm/udl/udl_drv.h +++ b/drivers/gpu/drm/udl/udl_drv.h @@ -104,7 +104,7 @@ udl_fb_user_fb_create(struct drm_device *dev, int udl_render_hline(struct drm_device *dev, int bpp, struct urb **urb_ptr, const char *front, char **urb_buf_ptr, - u32 byte_offset, u32 byte_width, + u32 byte_offset, u32 device_byte_offset, u32 byte_width, int *ident_ptr, int *sent_ptr); int udl_dumb_create(struct drm_file *file_priv, diff --git a/drivers/gpu/drm/udl/udl_fb.c b/drivers/gpu/drm/udl/udl_fb.c index 69a2b16f42a6..d4ab3beaada0 100644 --- a/drivers/gpu/drm/udl/udl_fb.c +++ b/drivers/gpu/drm/udl/udl_fb.c @@ -114,9 +114,10 @@ static void udlfb_dpy_deferred_io(struct fb_info *info, list_for_each_entry(cur, &fbdefio->pagelist, lru) { if (udl_render_hline(dev, (ufbdev->ufb.base.bits_per_pixel / 8), - &urb, (char *) info->fix.smem_start, - &cmd, cur->index << PAGE_SHIFT, - PAGE_SIZE, &bytes_identical, &bytes_sent)) + &urb, (char *) info->fix.smem_start, + &cmd, cur->index << PAGE_SHIFT, + cur->index << PAGE_SHIFT, + PAGE_SIZE, &bytes_identical, &bytes_sent)) goto error; bytes_rendered += PAGE_SIZE; } @@ -187,10 +188,11 @@ int udl_handle_damage(struct udl_framebuffer *fb, int x, int y, for (i = y; i < y + height ; i++) { const int line_offset = fb->base.pitches[0] * i; const int byte_offset = line_offset + (x * bpp); - + const int dev_byte_offset = (fb->base.width * bpp * i) + (x * bpp); if (udl_render_hline(dev, bpp, &urb, (char *) fb->obj->vmapping, - &cmd, byte_offset, width * bpp, + &cmd, byte_offset, dev_byte_offset, + width * bpp, &bytes_identical, &bytes_sent)) goto error; } diff --git a/drivers/gpu/drm/udl/udl_transfer.c b/drivers/gpu/drm/udl/udl_transfer.c index dc095526ffb7..142fee5f983f 100644 --- a/drivers/gpu/drm/udl/udl_transfer.c +++ b/drivers/gpu/drm/udl/udl_transfer.c @@ -213,11 +213,12 @@ static void udl_compress_hline16( */ int udl_render_hline(struct drm_device *dev, int bpp, struct urb **urb_ptr, const char *front, char **urb_buf_ptr, - u32 byte_offset, u32 byte_width, + u32 byte_offset, u32 device_byte_offset, + u32 byte_width, int *ident_ptr, int *sent_ptr) { const u8 *line_start, *line_end, *next_pixel; - u32 base16 = 0 + (byte_offset / bpp) * 2; + u32 base16 = 0 + (device_byte_offset / bpp) * 2; struct urb *urb = *urb_ptr; u8 *cmd = *urb_buf_ptr; u8 *cmd_end = (u8 *) urb->transfer_buffer + urb->transfer_buffer_length; -- cgit v1.2.3 From 82fa63bd6b87969dfde0139dbede243380b087d6 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 12 Oct 2012 11:55:16 +0100 Subject: i2c: mxs: remove broken PIOQUEUE support This I2C master can do DMA and PIOQUEUE (PIO with FIFO). Originally, only PIOQUEUE was supported and it had issues, then DMA support was added this cycle. The original intention was to keep PIOQUEUE since it has less overhead what is nice for small transfers. However, runtime switching between PIOQEUE and DMA depending on the transfer size never worked despite a lot of trying. Since PIOQUEUE mode itself was flaky (polling at places where interrupts failed to work) and the implementation also imposed a size limit for transfers, it is best to remove the support, so users don't fall over its limitations. It also makes the driver a lot cleaner and more robust. If somebody really wants less overhead, plain PIO mode could still be implemented with the addidtional advantage that this mode is also available on MX23, too. Signed-off-by: Wolfram Sang Reviewed-by: Marek Vasut --- drivers/i2c/busses/i2c-mxs.c | 186 ++++--------------------------------------- 1 file changed, 14 insertions(+), 172 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 1f58197062cf..286ca1917820 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -1,7 +1,7 @@ /* * Freescale MXS I2C bus driver * - * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K. + * Copyright (C) 2011-2012 Wolfram Sang, Pengutronix e.K. * * based on a (non-working) driver which was: * @@ -35,10 +35,6 @@ #define DRIVER_NAME "mxs-i2c" -static bool use_pioqueue; -module_param(use_pioqueue, bool, 0); -MODULE_PARM_DESC(use_pioqueue, "Use PIOQUEUE mode for transfer instead of DMA"); - #define MXS_I2C_CTRL0 (0x00) #define MXS_I2C_CTRL0_SET (0x04) @@ -75,23 +71,6 @@ MODULE_PARM_DESC(use_pioqueue, "Use PIOQUEUE mode for transfer instead of DMA"); MXS_I2C_CTRL1_SLAVE_STOP_IRQ | \ MXS_I2C_CTRL1_SLAVE_IRQ) -#define MXS_I2C_QUEUECTRL (0x60) -#define MXS_I2C_QUEUECTRL_SET (0x64) -#define MXS_I2C_QUEUECTRL_CLR (0x68) - -#define MXS_I2C_QUEUECTRL_QUEUE_RUN 0x20 -#define MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE 0x04 - -#define MXS_I2C_QUEUESTAT (0x70) -#define MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY 0x00002000 -#define MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK 0x0000001F - -#define MXS_I2C_QUEUECMD (0x80) - -#define MXS_I2C_QUEUEDATA (0x90) - -#define MXS_I2C_DATA (0xa0) - #define MXS_CMD_I2C_SELECT (MXS_I2C_CTRL0_RETAIN_CLOCK | \ MXS_I2C_CTRL0_PRE_SEND_START | \ @@ -153,7 +132,6 @@ struct mxs_i2c_dev { const struct mxs_i2c_speed_config *speed; /* DMA support components */ - bool dma_mode; int dma_channel; struct dma_chan *dmach; struct mxs_dma_data dma_data; @@ -172,99 +150,6 @@ static void mxs_i2c_reset(struct mxs_i2c_dev *i2c) writel(i2c->speed->timing2, i2c->regs + MXS_I2C_TIMING2); writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET); - if (i2c->dma_mode) - writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE, - i2c->regs + MXS_I2C_QUEUECTRL_CLR); - else - writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE, - i2c->regs + MXS_I2C_QUEUECTRL_SET); -} - -static void mxs_i2c_pioq_setup_read(struct mxs_i2c_dev *i2c, u8 addr, int len, - int flags) -{ - u32 data; - - writel(MXS_CMD_I2C_SELECT, i2c->regs + MXS_I2C_QUEUECMD); - - data = (addr << 1) | I2C_SMBUS_READ; - writel(data, i2c->regs + MXS_I2C_DATA); - - data = MXS_CMD_I2C_READ | MXS_I2C_CTRL0_XFER_COUNT(len) | flags; - writel(data, i2c->regs + MXS_I2C_QUEUECMD); -} - -static void mxs_i2c_pioq_setup_write(struct mxs_i2c_dev *i2c, - u8 addr, u8 *buf, int len, int flags) -{ - u32 data; - int i, shifts_left; - - data = MXS_CMD_I2C_WRITE | MXS_I2C_CTRL0_XFER_COUNT(len + 1) | flags; - writel(data, i2c->regs + MXS_I2C_QUEUECMD); - - /* - * We have to copy the slave address (u8) and buffer (arbitrary number - * of u8) into the data register (u32). To achieve that, the u8 are put - * into the MSBs of 'data' which is then shifted for the next u8. When - * appropriate, 'data' is written to MXS_I2C_DATA. So, the first u32 - * looks like this: - * - * 3 2 1 0 - * 10987654|32109876|54321098|76543210 - * --------+--------+--------+-------- - * buffer+2|buffer+1|buffer+0|slave_addr - */ - - data = ((addr << 1) | I2C_SMBUS_WRITE) << 24; - - for (i = 0; i < len; i++) { - data >>= 8; - data |= buf[i] << 24; - if ((i & 3) == 2) - writel(data, i2c->regs + MXS_I2C_DATA); - } - - /* Write out the remaining bytes if any */ - shifts_left = 24 - (i & 3) * 8; - if (shifts_left) - writel(data >> shifts_left, i2c->regs + MXS_I2C_DATA); -} - -/* - * TODO: should be replaceable with a waitqueue and RD_QUEUE_IRQ (setting the - * rd_threshold to 1). Couldn't get this to work, though. - */ -static int mxs_i2c_wait_for_data(struct mxs_i2c_dev *i2c) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(1000); - - while (readl(i2c->regs + MXS_I2C_QUEUESTAT) - & MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY) { - if (time_after(jiffies, timeout)) - return -ETIMEDOUT; - cond_resched(); - } - - return 0; -} - -static int mxs_i2c_finish_read(struct mxs_i2c_dev *i2c, u8 *buf, int len) -{ - u32 uninitialized_var(data); - int i; - - for (i = 0; i < len; i++) { - if ((i & 3) == 0) { - if (mxs_i2c_wait_for_data(i2c)) - return -ETIMEDOUT; - data = readl(i2c->regs + MXS_I2C_QUEUEDATA); - } - buf[i] = data & 0xff; - data >>= 8; - } - - return 0; } static void mxs_i2c_dma_finish(struct mxs_i2c_dev *i2c) @@ -432,39 +317,17 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, init_completion(&i2c->cmd_complete); i2c->cmd_err = 0; - if (i2c->dma_mode) { - ret = mxs_i2c_dma_setup_xfer(adap, msg, flags); - if (ret) - return ret; - } else { - if (msg->flags & I2C_M_RD) { - mxs_i2c_pioq_setup_read(i2c, msg->addr, - msg->len, flags); - } else { - mxs_i2c_pioq_setup_write(i2c, msg->addr, msg->buf, - msg->len, flags); - } - - writel(MXS_I2C_QUEUECTRL_QUEUE_RUN, - i2c->regs + MXS_I2C_QUEUECTRL_SET); - } + ret = mxs_i2c_dma_setup_xfer(adap, msg, flags); + if (ret) + return ret; ret = wait_for_completion_timeout(&i2c->cmd_complete, msecs_to_jiffies(1000)); if (ret == 0) goto timeout; - if (!i2c->dma_mode && !i2c->cmd_err && (msg->flags & I2C_M_RD)) { - ret = mxs_i2c_finish_read(i2c, msg->buf, msg->len); - if (ret) - goto timeout; - } - if (i2c->cmd_err == -ENXIO) mxs_i2c_reset(i2c); - else - writel(MXS_I2C_QUEUECTRL_QUEUE_RUN, - i2c->regs + MXS_I2C_QUEUECTRL_CLR); dev_dbg(i2c->dev, "Done with err=%d\n", i2c->cmd_err); @@ -472,8 +335,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, timeout: dev_dbg(i2c->dev, "Timeout!\n"); - if (i2c->dma_mode) - mxs_i2c_dma_finish(i2c); + mxs_i2c_dma_finish(i2c); mxs_i2c_reset(i2c); return -ETIMEDOUT; } @@ -502,7 +364,6 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id) { struct mxs_i2c_dev *i2c = dev_id; u32 stat = readl(i2c->regs + MXS_I2C_CTRL1) & MXS_I2C_IRQ_MASK; - bool is_last_cmd; if (!stat) return IRQ_NONE; @@ -515,14 +376,6 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id) /* MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ is only for slaves */ i2c->cmd_err = -EIO; - if (!i2c->dma_mode) { - is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) & - MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0; - - if (is_last_cmd || i2c->cmd_err) - complete(&i2c->cmd_complete); - } - writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR); return IRQ_HANDLED; @@ -555,15 +408,6 @@ static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c) struct device_node *node = dev->of_node; int ret; - /* - * The MXS I2C DMA mode is prefered and enabled by default. - * The PIO mode is still supported, but should be used only - * for debuging purposes etc. - */ - i2c->dma_mode = !use_pioqueue; - if (!i2c->dma_mode) - dev_info(dev, "Using PIOQUEUE mode for I2C transfers!\n"); - /* * TODO: This is a temporary solution and should be changed * to use generic DMA binding later when the helpers get in. @@ -571,8 +415,8 @@ static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c) ret = of_property_read_u32(node, "fsl,i2c-dma-channel", &i2c->dma_channel); if (ret) { - dev_warn(dev, "Failed to get DMA channel, using PIOQUEUE!\n"); - i2c->dma_mode = 0; + dev_err(dev, "Failed to get DMA channel!\n"); + return -ENODEV; } ret = of_property_read_u32(node, "clock-frequency", &speed); @@ -634,15 +478,13 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev) } /* Setup the DMA */ - if (i2c->dma_mode) { - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - i2c->dma_data.chan_irq = dmairq; - i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c); - if (!i2c->dmach) { - dev_err(dev, "Failed to request dma\n"); - return -ENODEV; - } + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + i2c->dma_data.chan_irq = dmairq; + i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c); + if (!i2c->dmach) { + dev_err(dev, "Failed to request dma\n"); + return -ENODEV; } platform_set_drvdata(pdev, i2c); -- cgit v1.2.3 From 817315f57408b1a9c78cbc7ff2bf186da45ddcc1 Mon Sep 17 00:00:00 2001 From: Philippe Begnic Date: Wed, 10 Oct 2012 13:02:26 +0200 Subject: i2c-nomadik: Fixup clock handling Make sure to clk_prepare as well as clk_enable. Signed-off-by: Philippe Begnic Signed-off-by: Ulf Hansson Signed-off-by: Linus Walleij Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-nomadik.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 698d7acb0f08..02c3115a2dfa 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -644,7 +644,11 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap, pm_runtime_get_sync(&dev->adev->dev); - clk_enable(dev->clk); + status = clk_prepare_enable(dev->clk); + if (status) { + dev_err(&dev->adev->dev, "can't prepare_enable clock\n"); + goto out_clk; + } status = init_hw(dev); if (status) @@ -671,7 +675,8 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap, } out: - clk_disable(dev->clk); + clk_disable_unprepare(dev->clk); +out_clk: pm_runtime_put_sync(&dev->adev->dev); dev->busy = false; -- cgit v1.2.3 From 91b370a0dbda5de92c2cf4c3bc0d18d6bf08f05f Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Thu, 1 Nov 2012 22:08:14 +0530 Subject: i2c: tegra: set irq name as device name When watching the irqs name of tegra i2c, all instances irq name shows as tegra_i2c. Passing the device name properly to have the irq names with instance like tegra-i2c.0, tegra-i2c.1 etc. Signed-off-by: Laxman Dewangan Acked-by: Jean Delvare Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-tegra.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index f981ac4e6783..dcea77bf6f50 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -742,7 +742,7 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev) } ret = devm_request_irq(&pdev->dev, i2c_dev->irq, - tegra_i2c_isr, 0, pdev->name, i2c_dev); + tegra_i2c_isr, 0, dev_name(&pdev->dev), i2c_dev); if (ret) { dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq); return ret; -- cgit v1.2.3 From 90b5c1d7c45eeb622302680ff96ed30c1a2b6f0e Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Wed, 24 Oct 2012 14:54:13 +0800 Subject: PCI/PM: Fix deadlock when unbinding device if parent in D3cold If a PCI device and its parents are put into D3cold, unbinding the device will trigger deadlock as follow: - driver_unbind - device_release_driver - device_lock(dev) <--- previous lock here - __device_release_driver - pm_runtime_get_sync ... - rpm_resume(dev) - rpm_resume(dev->parent) ... - pci_pm_runtime_resume ... - pci_set_power_state - __pci_start_power_transition - pci_wakeup_bus(dev->parent->subordinate) - pci_walk_bus - device_lock(dev) <--- deadlock here If we do not do device_lock in pci_walk_bus, we can avoid deadlock. Device_lock in pci_walk_bus is introduced in commit: d71374dafbba7ec3f67371d3b7e9f6310a588808, corresponding email thread is: https://lkml.org/lkml/2006/5/26/38. The patch author Zhang Yanmin said device_lock is added to pci_walk_bus because: Some error handling functions call pci_walk_bus. For example, PCIe aer. Here we lock the device, so the driver wouldn't detach from the device, as the cb might call driver's callback function. So I fixed the deadlock as follows: - remove device_lock from pci_walk_bus - add device_lock into callback if callback will call driver's callback I checked pci_walk_bus users one by one, and found only PCIe aer needs device lock. Signed-off-by: Huang Ying Signed-off-by: Bjorn Helgaas Acked-by: Rafael J. Wysocki CC: stable@vger.kernel.org # v3.6+ CC: Zhang Yanmin --- drivers/pci/bus.c | 3 --- drivers/pci/pcie/aer/aerdrv_core.c | 20 ++++++++++++++++---- 2 files changed, 16 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index 6241fd05bd41..a543746fb354 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -320,10 +320,7 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), } else next = dev->bus_list.next; - /* Run device routines with the device locked */ - device_lock(&dev->dev); retval = cb(dev, userdata); - device_unlock(&dev->dev); if (retval) break; } diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index 06bad96af415..af4e31cd3a3b 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -213,6 +213,7 @@ static int report_error_detected(struct pci_dev *dev, void *data) struct aer_broadcast_data *result_data; result_data = (struct aer_broadcast_data *) data; + device_lock(&dev->dev); dev->error_state = result_data->state; if (!dev->driver || @@ -231,12 +232,14 @@ static int report_error_detected(struct pci_dev *dev, void *data) dev->driver ? "no AER-aware driver" : "no driver"); } - return 0; + goto out; } err_handler = dev->driver->err_handler; vote = err_handler->error_detected(dev, result_data->state); result_data->result = merge_result(result_data->result, vote); +out: + device_unlock(&dev->dev); return 0; } @@ -247,14 +250,17 @@ static int report_mmio_enabled(struct pci_dev *dev, void *data) struct aer_broadcast_data *result_data; result_data = (struct aer_broadcast_data *) data; + device_lock(&dev->dev); if (!dev->driver || !dev->driver->err_handler || !dev->driver->err_handler->mmio_enabled) - return 0; + goto out; err_handler = dev->driver->err_handler; vote = err_handler->mmio_enabled(dev); result_data->result = merge_result(result_data->result, vote); +out: + device_unlock(&dev->dev); return 0; } @@ -265,14 +271,17 @@ static int report_slot_reset(struct pci_dev *dev, void *data) struct aer_broadcast_data *result_data; result_data = (struct aer_broadcast_data *) data; + device_lock(&dev->dev); if (!dev->driver || !dev->driver->err_handler || !dev->driver->err_handler->slot_reset) - return 0; + goto out; err_handler = dev->driver->err_handler; vote = err_handler->slot_reset(dev); result_data->result = merge_result(result_data->result, vote); +out: + device_unlock(&dev->dev); return 0; } @@ -280,15 +289,18 @@ static int report_resume(struct pci_dev *dev, void *data) { const struct pci_error_handlers *err_handler; + device_lock(&dev->dev); dev->error_state = pci_channel_io_normal; if (!dev->driver || !dev->driver->err_handler || !dev->driver->err_handler->resume) - return 0; + goto out; err_handler = dev->driver->err_handler; err_handler->resume(dev); +out: + device_unlock(&dev->dev); return 0; } -- cgit v1.2.3 From 3ff2de9ba1a2e22e548979dbcd46e999b22c93d8 Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Wed, 24 Oct 2012 14:54:14 +0800 Subject: PCI/PM: Resume device before shutdown Some actions during shutdown need device to be in D0 state, such as MSI shutdown etc, so resume device before shutdown. Without this patch, a device may not be enumerated after a kexec because the corresponding bridge is not in D0, so that configuration space of the device is not accessible. Signed-off-by: Huang Ying Signed-off-by: Bjorn Helgaas Acked-by: Rafael J. Wysocki CC: stable@vger.kernel.org # v3.6+ --- drivers/pci/pci-driver.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 94c6e2aa03d6..6c94fc9489e7 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -398,6 +398,8 @@ static void pci_device_shutdown(struct device *dev) struct pci_dev *pci_dev = to_pci_dev(dev); struct pci_driver *drv = pci_dev->driver; + pm_runtime_resume(dev); + if (drv && drv->shutdown) drv->shutdown(pci_dev); pci_msi_shutdown(pci_dev); @@ -408,16 +410,6 @@ static void pci_device_shutdown(struct device *dev) * continue to do DMA */ pci_disable_device(pci_dev); - - /* - * Devices may be enabled to wake up by runtime PM, but they need not - * be supposed to wake up the system from its "power off" state (e.g. - * ACPI S5). Therefore disable wakeup for all devices that aren't - * supposed to wake up the system at this point. The state argument - * will be ignored by pci_enable_wake(). - */ - if (!device_may_wakeup(dev)) - pci_enable_wake(pci_dev, PCI_UNKNOWN, false); } #ifdef CONFIG_PM -- cgit v1.2.3 From 2b674047bef23d49a7ca8ec32f4b9e4e12588621 Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Sun, 28 Oct 2012 21:59:04 +0000 Subject: bnx2x: fix HW initialization using fw 7.8.x Since commit 96bed4b9 (use FW 7.8.2) BRB HW block needs to be initialized using fw values for all devices. Otherwise ETS on 57712/578xx will not work. Signed-off-by: Dmitry Kravkov Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index f23e8c022954..bd1fd3d87c24 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -6794,8 +6794,9 @@ static int bnx2x_init_hw_port(struct bnx2x *bp) bnx2x_init_block(bp, BLOCK_DORQ, init_phase); + bnx2x_init_block(bp, BLOCK_BRB1, init_phase); + if (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp)) { - bnx2x_init_block(bp, BLOCK_BRB1, init_phase); if (IS_MF(bp)) low = ((bp->flags & ONE_PORT_FLAG) ? 160 : 246); -- cgit v1.2.3 From 57c10b61c84bfed68b1b317d6f507a392724b9c4 Mon Sep 17 00:00:00 2001 From: Peter Senna Tschudin Date: Sun, 28 Oct 2012 06:12:00 +0000 Subject: drivers/net/ethernet/nxp/lpc_eth.c: Call mdiobus_unregister before mdiobus_free Based on commit b27393aecf66199f5ddad37c302d3e0cfadbe6c0 Calling mdiobus_free without calling mdiobus_unregister causes BUG_ON(). This patch fixes the issue. The semantic patch that found this issue(http://coccinelle.lip6.fr/): // @@ expression E; @@ ... when != mdiobus_unregister(E); + mdiobus_unregister(E); mdiobus_free(E); // Signed-off-by: Peter Senna Tschudin Tested-by: Roland Stigge Tested-by: Alexandre Pereira da Silva Signed-off-by: David S. Miller --- drivers/net/ethernet/nxp/lpc_eth.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c index 53743f7a2ca9..af8b4142088c 100644 --- a/drivers/net/ethernet/nxp/lpc_eth.c +++ b/drivers/net/ethernet/nxp/lpc_eth.c @@ -1524,6 +1524,7 @@ static int lpc_eth_drv_remove(struct platform_device *pdev) pldat->dma_buff_base_p); free_irq(ndev->irq, ndev); iounmap(pldat->net_base); + mdiobus_unregister(pldat->mii_bus); mdiobus_free(pldat->mii_bus); clk_disable(pldat->clk); clk_put(pldat->clk); -- cgit v1.2.3 From aa731872f7d33dcb8b54dad0cfb82d4e4d195d7e Mon Sep 17 00:00:00 2001 From: Peter Senna Tschudin Date: Sun, 28 Oct 2012 06:12:01 +0000 Subject: drivers/net/phy/mdio-bitbang.c: Call mdiobus_unregister before mdiobus_free Based on commit b27393aecf66199f5ddad37c302d3e0cfadbe6c0 Calling mdiobus_free without calling mdiobus_unregister causes BUG_ON(). This patch fixes the issue. The semantic patch that found this issue(http://coccinelle.lip6.fr/): // @@ expression E; @@ ... when != mdiobus_unregister(E); + mdiobus_unregister(E); mdiobus_free(E); // Signed-off-by: Peter Senna Tschudin Signed-off-by: David S. Miller --- drivers/net/phy/mdio-bitbang.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/phy/mdio-bitbang.c b/drivers/net/phy/mdio-bitbang.c index daec9b05d168..6428fcbbdd4b 100644 --- a/drivers/net/phy/mdio-bitbang.c +++ b/drivers/net/phy/mdio-bitbang.c @@ -234,6 +234,7 @@ void free_mdio_bitbang(struct mii_bus *bus) struct mdiobb_ctrl *ctrl = bus->priv; module_put(ctrl->ops->owner); + mdiobus_unregister(bus); mdiobus_free(bus); } EXPORT_SYMBOL(free_mdio_bitbang); -- cgit v1.2.3 From e3c98512780ae2cfb90be2152ab35294439bb7bb Mon Sep 17 00:00:00 2001 From: Vipul Pandya Date: Mon, 29 Oct 2012 02:02:36 +0000 Subject: cxgb4: Fix unable to get UP event from the LLD If T4 configuration file gets loaded from the /lib/firmware/cxgb4/ directory then offload capabilities of the cards were getting disabled during initialization. Hence ULDs do not get an UP event from the LLD. Signed-off-by: Jay Hernandez Signed-off-by: Vipul Pandya Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index c1cde11b0c6d..0df1284df497 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -3415,16 +3415,6 @@ static int adap_init0_config(struct adapter *adapter, int reset) "mismatch: [fini] csum=%#x, computed csum=%#x\n", finicsum, cfcsum); - /* - * If we're a pure NIC driver then disable all offloading facilities. - * This will allow the firmware to optimize aspects of the hardware - * configuration which will result in improved performance. - */ - caps_cmd.ofldcaps = 0; - caps_cmd.iscsicaps = 0; - caps_cmd.rdmacaps = 0; - caps_cmd.fcoecaps = 0; - /* * And now tell the firmware to use the configuration we just loaded. */ -- cgit v1.2.3 From 608f62b996c6e140ff7515abe75305aed4726b33 Mon Sep 17 00:00:00 2001 From: Devendra Naga Date: Wed, 31 Oct 2012 17:46:10 +0900 Subject: thermal: solve compilation errors in rcar_thermal MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit following were the errors reported drivers/thermal/rcar_thermal.c: In function ‘rcar_thermal_probe’: drivers/thermal/rcar_thermal.c:214:10: warning: passing argument 3 of ‘thermal_zone_device_register’ makes integer from pointer without a cast [enabled by default] include/linux/thermal.h:166:29: note: expected ‘int’ but argument is of type ‘struct rcar_thermal_priv *’ drivers/thermal/rcar_thermal.c:214:10: error: too few arguments to function ‘thermal_zone_device_register’ include/linux/thermal.h:166:29: note: declared here make[1]: *** [drivers/thermal/rcar_thermal.o] Error 1 make: *** [drivers/thermal/rcar_thermal.o] Error 2 with gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) Signed-off-by: Devendra Naga Signed-off-by: Kuninori Morimoto Signed-off-by: Zhang Rui --- drivers/thermal/rcar_thermal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c index d4452716aaab..f7a1b574a304 100644 --- a/drivers/thermal/rcar_thermal.c +++ b/drivers/thermal/rcar_thermal.c @@ -210,7 +210,7 @@ static int rcar_thermal_probe(struct platform_device *pdev) goto error_free_priv; } - zone = thermal_zone_device_register("rcar_thermal", 0, priv, + zone = thermal_zone_device_register("rcar_thermal", 0, 0, priv, &rcar_thermal_zone_ops, 0, 0); if (IS_ERR(zone)) { dev_err(&pdev->dev, "thermal zone device is NULL\n"); -- cgit v1.2.3 From fba4e087361605d1eed63343bb08811f097c83ee Mon Sep 17 00:00:00 2001 From: Igor Murzov Date: Sat, 13 Oct 2012 04:41:25 +0400 Subject: ACPI video: Ignore errors after _DOD evaluation. There are systems where video module known to work fine regardless of broken _DOD and ignoring returned value here doesn't cause any issues later. This should fix brightness controls on some laptops. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47861 Signed-off-by: Igor Murzov Reviewed-by: Sergey V Signed-off-by: Zhang Rui --- drivers/acpi/video.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index f94d4c818fc7..0230cb6cbb3a 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1345,12 +1345,15 @@ static int acpi_video_bus_get_devices(struct acpi_video_bus *video, struct acpi_device *device) { - int status; + int status = 0; struct acpi_device *dev; - status = acpi_video_device_enumerate(video); - if (status) - return status; + /* + * There are systems where video module known to work fine regardless + * of broken _DOD and ignoring returned value here doesn't cause + * any issues later. + */ + acpi_video_device_enumerate(video); list_for_each_entry(dev, &device->children, node) { -- cgit v1.2.3 From 3ae53b1e13e1ca7928a3dd2d51ea5417b618560c Mon Sep 17 00:00:00 2001 From: Jonghwan Choi Date: Tue, 23 Oct 2012 14:54:42 +0800 Subject: exynos4_tmu_driver_ids should be exynos_tmu_driver_ids. Signed-off-by: Jonghwan Choi Reviewed-by: Amit Daniel Kachhap Signed-off-by: Zhang Rui --- drivers/thermal/exynos_thermal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c index fd03e8581afc..6dd29e4ce36b 100644 --- a/drivers/thermal/exynos_thermal.c +++ b/drivers/thermal/exynos_thermal.c @@ -815,7 +815,7 @@ static struct platform_device_id exynos_tmu_driver_ids[] = { }, { }, }; -MODULE_DEVICE_TABLE(platform, exynos4_tmu_driver_ids); +MODULE_DEVICE_TABLE(platform, exynos_tmu_driver_ids); static inline struct exynos_tmu_platform_data *exynos_get_driver_data( struct platform_device *pdev) -- cgit v1.2.3 From a4d7e485bca65bd516fced77b03f92419308df72 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 29 Oct 2012 07:30:49 +0000 Subject: vmxnet3: must split too big fragments vmxnet3 has a 16Kbytes limit per tx descriptor, that happened to work as long as we provided PAGE_SIZE fragments. Our stack can now build larger fragments, so we need to split them to the 16kbytes boundary. Signed-off-by: Eric Dumazet Reported-by: jongman heo Tested-by: jongman heo Cc: Shreyas Bhatewara Reviewed-by: Bhavesh Davda Signed-off-by: Shreyas Bhatewara Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_drv.c | 65 +++++++++++++++++++++++++++------------ 1 file changed, 45 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index ce9d4f2c9776..0ae1bcc6da73 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -744,28 +744,43 @@ vmxnet3_map_pkt(struct sk_buff *skb, struct vmxnet3_tx_ctx *ctx, for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i]; + u32 buf_size; - tbi = tq->buf_info + tq->tx_ring.next2fill; - tbi->map_type = VMXNET3_MAP_PAGE; - tbi->dma_addr = skb_frag_dma_map(&adapter->pdev->dev, frag, - 0, skb_frag_size(frag), - DMA_TO_DEVICE); + buf_offset = 0; + len = skb_frag_size(frag); + while (len) { + tbi = tq->buf_info + tq->tx_ring.next2fill; + if (len < VMXNET3_MAX_TX_BUF_SIZE) { + buf_size = len; + dw2 |= len; + } else { + buf_size = VMXNET3_MAX_TX_BUF_SIZE; + /* spec says that for TxDesc.len, 0 == 2^14 */ + } + tbi->map_type = VMXNET3_MAP_PAGE; + tbi->dma_addr = skb_frag_dma_map(&adapter->pdev->dev, frag, + buf_offset, buf_size, + DMA_TO_DEVICE); - tbi->len = skb_frag_size(frag); + tbi->len = buf_size; - gdesc = tq->tx_ring.base + tq->tx_ring.next2fill; - BUG_ON(gdesc->txd.gen == tq->tx_ring.gen); + gdesc = tq->tx_ring.base + tq->tx_ring.next2fill; + BUG_ON(gdesc->txd.gen == tq->tx_ring.gen); - gdesc->txd.addr = cpu_to_le64(tbi->dma_addr); - gdesc->dword[2] = cpu_to_le32(dw2 | skb_frag_size(frag)); - gdesc->dword[3] = 0; + gdesc->txd.addr = cpu_to_le64(tbi->dma_addr); + gdesc->dword[2] = cpu_to_le32(dw2); + gdesc->dword[3] = 0; - dev_dbg(&adapter->netdev->dev, - "txd[%u]: 0x%llu %u %u\n", - tq->tx_ring.next2fill, le64_to_cpu(gdesc->txd.addr), - le32_to_cpu(gdesc->dword[2]), gdesc->dword[3]); - vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring); - dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT; + dev_dbg(&adapter->netdev->dev, + "txd[%u]: 0x%llu %u %u\n", + tq->tx_ring.next2fill, le64_to_cpu(gdesc->txd.addr), + le32_to_cpu(gdesc->dword[2]), gdesc->dword[3]); + vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring); + dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT; + + len -= buf_size; + buf_offset += buf_size; + } } ctx->eop_txd = gdesc; @@ -886,6 +901,18 @@ vmxnet3_prepare_tso(struct sk_buff *skb, } } +static int txd_estimate(const struct sk_buff *skb) +{ + int count = VMXNET3_TXD_NEEDED(skb_headlen(skb)) + 1; + int i; + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i]; + + count += VMXNET3_TXD_NEEDED(skb_frag_size(frag)); + } + return count; +} /* * Transmits a pkt thru a given tq @@ -914,9 +941,7 @@ vmxnet3_tq_xmit(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, union Vmxnet3_GenericDesc tempTxDesc; #endif - /* conservatively estimate # of descriptors to use */ - count = VMXNET3_TXD_NEEDED(skb_headlen(skb)) + - skb_shinfo(skb)->nr_frags + 1; + count = txd_estimate(skb); ctx.ipv4 = (vlan_get_protocol(skb) == cpu_to_be16(ETH_P_IP)); -- cgit v1.2.3 From 175c0dffef310fc7d7f026ca4a7682beb2fbd8ec Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Wed, 31 Oct 2012 00:29:57 +0000 Subject: drivers/net: use tasklet_kill in device remove/close process Some driver uses tasklet_disable in device remove/close process, tasklet_disable will inc tasklet->count and return. If the tasklet is not handled yet because some softirq pressure, the tasklet will placed on the tasklet_vec, never have a chance to excute. This might lead to ksoftirqd heavy loaded, wakeup with pending_softirq, but tasklet is disabled. tasklet_kill should be used in this case. Signed-off-by: Xiaotian Feng Cc: "David S. Miller" Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/ethernet/jme.c | 8 ++++---- drivers/net/ethernet/marvell/skge.c | 2 +- drivers/net/ethernet/micrel/ksz884x.c | 4 ++-- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 2 +- drivers/net/wireless/b43legacy/pio.c | 2 +- 5 files changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c index f8064df10cc4..92317e9c0f73 100644 --- a/drivers/net/ethernet/jme.c +++ b/drivers/net/ethernet/jme.c @@ -1948,10 +1948,10 @@ jme_close(struct net_device *netdev) JME_NAPI_DISABLE(jme); - tasklet_disable(&jme->linkch_task); - tasklet_disable(&jme->txclean_task); - tasklet_disable(&jme->rxclean_task); - tasklet_disable(&jme->rxempty_task); + tasklet_kill(&jme->linkch_task); + tasklet_kill(&jme->txclean_task); + tasklet_kill(&jme->rxclean_task); + tasklet_kill(&jme->rxempty_task); jme_disable_rx_engine(jme); jme_disable_tx_engine(jme); diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c index 9b9c2ac5c4c2..d19a143aa5a8 100644 --- a/drivers/net/ethernet/marvell/skge.c +++ b/drivers/net/ethernet/marvell/skge.c @@ -4026,7 +4026,7 @@ static void __devexit skge_remove(struct pci_dev *pdev) dev0 = hw->dev[0]; unregister_netdev(dev0); - tasklet_disable(&hw->phy_task); + tasklet_kill(&hw->phy_task); spin_lock_irq(&hw->hw_lock); hw->intr_mask = 0; diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c index 318fee91c79d..e558edd1cb6c 100644 --- a/drivers/net/ethernet/micrel/ksz884x.c +++ b/drivers/net/ethernet/micrel/ksz884x.c @@ -5407,8 +5407,8 @@ static int netdev_close(struct net_device *dev) /* Delay for receive task to stop scheduling itself. */ msleep(2000 / HZ); - tasklet_disable(&hw_priv->rx_tasklet); - tasklet_disable(&hw_priv->tx_tasklet); + tasklet_kill(&hw_priv->rx_tasklet); + tasklet_kill(&hw_priv->tx_tasklet); free_irq(dev->irq, hw_priv->dev); transmit_cleanup(hw_priv, 0); diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 0793299bd39e..1d04754a6637 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -990,7 +990,7 @@ static int axienet_stop(struct net_device *ndev) axienet_setoptions(ndev, lp->options & ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN)); - tasklet_disable(&lp->dma_err_tasklet); + tasklet_kill(&lp->dma_err_tasklet); free_irq(lp->tx_irq, ndev); free_irq(lp->rx_irq, ndev); diff --git a/drivers/net/wireless/b43legacy/pio.c b/drivers/net/wireless/b43legacy/pio.c index 192251adf986..282eedec675e 100644 --- a/drivers/net/wireless/b43legacy/pio.c +++ b/drivers/net/wireless/b43legacy/pio.c @@ -382,7 +382,7 @@ static void cancel_transfers(struct b43legacy_pioqueue *queue) { struct b43legacy_pio_txpacket *packet, *tmp_packet; - tasklet_disable(&queue->txtask); + tasklet_kill(&queue->txtask); list_for_each_entry_safe(packet, tmp_packet, &queue->txrunning, list) free_txpacket(packet, 0); -- cgit v1.2.3 From b00e69dee4ccbb3a19989e3d4f1385bc2e3406cd Mon Sep 17 00:00:00 2001 From: Cyril Brulebois Date: Wed, 31 Oct 2012 14:00:46 +0000 Subject: r8169: Fix WoL on RTL8168d/8111d. This regression was spotted between Debian squeeze and Debian wheezy kernels (respectively based on 2.6.32 and 3.2). More info about Wake-on-LAN issues with Realtek's 816x chipsets can be found in the following thread: http://marc.info/?t=132079219400004 Probable regression from d4ed95d796e5126bba51466dc07e287cebc8bd19; more chipsets are likely affected. Tested on top of a 3.2.23 kernel. Reported-by: Florent Fourcot Tested-by: Florent Fourcot Hinted-by: Francois Romieu Signed-off-by: Cyril Brulebois Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index e7ff886e8047..eb6a5e4ca4c8 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -3827,6 +3827,8 @@ static void rtl_wol_suspend_quirk(struct rtl8169_private *tp) void __iomem *ioaddr = tp->mmio_addr; switch (tp->mac_version) { + case RTL_GIGA_MAC_VER_25: + case RTL_GIGA_MAC_VER_26: case RTL_GIGA_MAC_VER_29: case RTL_GIGA_MAC_VER_30: case RTL_GIGA_MAC_VER_32: -- cgit v1.2.3 From 0481776b7a70f09acf7d9d97c288c3a8403fbfe4 Mon Sep 17 00:00:00 2001 From: Nathan Walp Date: Thu, 1 Nov 2012 12:08:47 +0000 Subject: r8169: allow multicast packets on sub-8168f chipset. RTL_GIGA_MAC_VER_35 includes no multicast hardware filter. Signed-off-by: Nathan Walp Suggested-by: Hayes Wang Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index eb6a5e4ca4c8..927aa33d4349 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -4521,6 +4521,9 @@ static void rtl_set_rx_mode(struct net_device *dev) mc_filter[1] = swab32(data); } + if (tp->mac_version == RTL_GIGA_MAC_VER_35) + mc_filter[1] = mc_filter[0] = 0xffffffff; + RTL_W32(MAR0 + 4, mc_filter[1]); RTL_W32(MAR0 + 0, mc_filter[0]); -- cgit v1.2.3 From 00acda68b587181546d68fb98db1c5c73ee6c16f Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Fri, 2 Nov 2012 00:44:20 +0000 Subject: smsc95xx: fix tx checksum offload for big endian f7b2927 introduced tx checksum offload support for smsc95xx, and enabled it by default. This feature doesn't take endianness into account, so causes most tx to fail on those platforms. This patch fixes the problem fully by adding the missing conversion. An alternate workaround is to disable TX checksum offload on those platforms. The cpu impact of this feature is very low. Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc95xx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 7479a5761d0d..3286166415b4 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1344,6 +1344,7 @@ static struct sk_buff *smsc95xx_tx_fixup(struct usbnet *dev, } else { u32 csum_preamble = smsc95xx_calc_csum_preamble(skb); skb_push(skb, 4); + cpu_to_le32s(&csum_preamble); memcpy(skb->data, &csum_preamble, 4); } } -- cgit v1.2.3 From efc7ce0334b68387b48baf16a285a9b1d5c19256 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Fri, 2 Nov 2012 04:36:17 +0000 Subject: net: bnx2x: Fix typo in bnx2x driver Correct spelling typo in bnx2x driver Signed-off-by: Masanari Iida Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 2 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index c65295dded39..6e5bdd1a31d9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -1702,7 +1702,7 @@ static int bnx2x_set_eee(struct net_device *dev, struct ethtool_eee *edata) SHMEM_EEE_ADV_STATUS_SHIFT); if ((advertised != (eee_cfg & SHMEM_EEE_ADV_STATUS_MASK))) { DP(BNX2X_MSG_ETHTOOL, - "Direct manipulation of EEE advertisment is not supported\n"); + "Direct manipulation of EEE advertisement is not supported\n"); return -EINVAL; } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 6dd0dd076cc5..f6cfdc6cf20f 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -9941,7 +9941,7 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy, else rc = bnx2x_8483x_disable_eee(phy, params, vars); if (rc) { - DP(NETIF_MSG_LINK, "Failed to set EEE advertisment\n"); + DP(NETIF_MSG_LINK, "Failed to set EEE advertisement\n"); return rc; } } else { @@ -12987,7 +12987,7 @@ static u8 bnx2x_analyze_link_error(struct link_params *params, DP(NETIF_MSG_LINK, "Analyze TX Fault\n"); break; default: - DP(NETIF_MSG_LINK, "Analyze UNKOWN\n"); + DP(NETIF_MSG_LINK, "Analyze UNKNOWN\n"); } DP(NETIF_MSG_LINK, "Link changed:[%x %x]->%x\n", vars->link_up, old_status, status); -- cgit v1.2.3 From cf47a83fb06e42ae1b572ed68326068c7feaceae Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 19 Oct 2012 15:25:37 -0400 Subject: xen/hypercall: fix hypercall fallback code for very old hypervisors While copying the argument structures in HYPERVISOR_event_channel_op() and HYPERVISOR_physdev_op() into the local variable is sufficiently safe even if the actual structure is smaller than the container one, copying back eventual output values the same way isn't: This may collide with on-stack variables (particularly "rc") which may change between the first and second memcpy() (i.e. the second memcpy() could discard that change). Move the fallback code into out-of-line functions, and handle all of the operations known by this old a hypervisor individually: Some don't require copying back anything at all, and for the rest use the individual argument structures' sizes rather than the container's. Reported-by: Dan Carpenter Signed-off-by: Jan Beulich [v2: Reduce #define/#undef usage in HYPERVISOR_physdev_op_compat().] [v3: Fix compile errors when modules use said hypercalls] [v4: Add xen_ prefix to the HYPERCALL_..] [v5: Alter the name and only EXPORT_SYMBOL_GPL one of them] Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/Makefile | 2 +- drivers/xen/fallback.c | 80 ++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 81 insertions(+), 1 deletion(-) create mode 100644 drivers/xen/fallback.c (limited to 'drivers') diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile index 0e8637035457..46de6cdfccb3 100644 --- a/drivers/xen/Makefile +++ b/drivers/xen/Makefile @@ -2,7 +2,7 @@ ifneq ($(CONFIG_ARM),y) obj-y += manage.o balloon.o obj-$(CONFIG_HOTPLUG_CPU) += cpu_hotplug.o endif -obj-y += grant-table.o features.o events.o +obj-y += grant-table.o features.o events.o fallback.o obj-y += xenbus/ nostackp := $(call cc-option, -fno-stack-protector) diff --git a/drivers/xen/fallback.c b/drivers/xen/fallback.c new file mode 100644 index 000000000000..0ef7c4d40f86 --- /dev/null +++ b/drivers/xen/fallback.c @@ -0,0 +1,80 @@ +#include +#include +#include +#include +#include +#include + +int xen_event_channel_op_compat(int cmd, void *arg) +{ + struct evtchn_op op; + int rc; + + op.cmd = cmd; + memcpy(&op.u, arg, sizeof(op.u)); + rc = _hypercall1(int, event_channel_op_compat, &op); + + switch (cmd) { + case EVTCHNOP_close: + case EVTCHNOP_send: + case EVTCHNOP_bind_vcpu: + case EVTCHNOP_unmask: + /* no output */ + break; + +#define COPY_BACK(eop) \ + case EVTCHNOP_##eop: \ + memcpy(arg, &op.u.eop, sizeof(op.u.eop)); \ + break + + COPY_BACK(bind_interdomain); + COPY_BACK(bind_virq); + COPY_BACK(bind_pirq); + COPY_BACK(status); + COPY_BACK(alloc_unbound); + COPY_BACK(bind_ipi); +#undef COPY_BACK + + default: + WARN_ON(rc != -ENOSYS); + break; + } + + return rc; +} +EXPORT_SYMBOL_GPL(xen_event_channel_op_compat); + +int HYPERVISOR_physdev_op_compat(int cmd, void *arg) +{ + struct physdev_op op; + int rc; + + op.cmd = cmd; + memcpy(&op.u, arg, sizeof(op.u)); + rc = _hypercall1(int, physdev_op_compat, &op); + + switch (cmd) { + case PHYSDEVOP_IRQ_UNMASK_NOTIFY: + case PHYSDEVOP_set_iopl: + case PHYSDEVOP_set_iobitmap: + case PHYSDEVOP_apic_write: + /* no output */ + break; + +#define COPY_BACK(pop, fld) \ + case PHYSDEVOP_##pop: \ + memcpy(arg, &op.u.fld, sizeof(op.u.fld)); \ + break + + COPY_BACK(irq_status_query, irq_status_query); + COPY_BACK(apic_read, apic_op); + COPY_BACK(ASSIGN_VECTOR, irq_op); +#undef COPY_BACK + + default: + WARN_ON(rc != -ENOSYS); + break; + } + + return rc; +} -- cgit v1.2.3 From 0b53fa35355725b5130b8e73309995c4d4b4868b Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Sat, 27 Oct 2012 14:47:46 +0530 Subject: pinctrl: SPEAr: Don't update all non muxreg bits on pinctrl_disable Not all bits of a register are used for pinctrl in SPEAr. So only update bits relevant to pinctrl using muxreg->mask. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Linus Walleij --- drivers/pinctrl/spear/pinctrl-spear.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pinctrl/spear/pinctrl-spear.c b/drivers/pinctrl/spear/pinctrl-spear.c index 5d4f44f462f0..b1fd6ee33c6c 100644 --- a/drivers/pinctrl/spear/pinctrl-spear.c +++ b/drivers/pinctrl/spear/pinctrl-spear.c @@ -244,7 +244,7 @@ static int spear_pinctrl_endisable(struct pinctrl_dev *pctldev, else temp = ~muxreg->val; - val |= temp; + val |= muxreg->mask & temp; pmx_writel(pmx, val, muxreg->reg); } } -- cgit v1.2.3 From a778005589918c8051c496d8b7c96037776ed239 Mon Sep 17 00:00:00 2001 From: Shiraz Hashim Date: Sat, 27 Oct 2012 14:47:47 +0530 Subject: pinctrl: SPEAr3xx: correct register space to configure pwm To have pwm on pad no. 34 we also need to select between pwm and SD_LED functions. Add this to pwm pin mux register configuration. Signed-off-by: Shiraz Hashim Signed-off-by: Viresh Kumar Reviewed-by: Vipin Kumar Signed-off-by: Linus Walleij --- drivers/pinctrl/spear/pinctrl-spear320.c | 4 ++++ drivers/pinctrl/spear/pinctrl-spear3xx.h | 1 + 2 files changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/pinctrl/spear/pinctrl-spear320.c b/drivers/pinctrl/spear/pinctrl-spear320.c index 020b1e0bdb3e..4fccf9529541 100644 --- a/drivers/pinctrl/spear/pinctrl-spear320.c +++ b/drivers/pinctrl/spear/pinctrl-spear320.c @@ -2239,6 +2239,10 @@ static struct spear_muxreg pwm2_pin_34_muxreg[] = { .reg = PMX_CONFIG_REG, .mask = PMX_SSP_CS_MASK, .val = 0, + }, { + .reg = MODE_CONFIG_REG, + .mask = PMX_PWM_MASK, + .val = PMX_PWM_MASK, }, { .reg = IP_SEL_PAD_30_39_REG, .mask = PMX_PL_34_MASK, diff --git a/drivers/pinctrl/spear/pinctrl-spear3xx.h b/drivers/pinctrl/spear/pinctrl-spear3xx.h index 31f44347f17c..7860b36053c4 100644 --- a/drivers/pinctrl/spear/pinctrl-spear3xx.h +++ b/drivers/pinctrl/spear/pinctrl-spear3xx.h @@ -15,6 +15,7 @@ #include "pinctrl-spear.h" /* pad mux declarations */ +#define PMX_PWM_MASK (1 << 16) #define PMX_FIRDA_MASK (1 << 14) #define PMX_I2C_MASK (1 << 13) #define PMX_SSP_CS_MASK (1 << 12) -- cgit v1.2.3 From b06bf9a905e1d9ebb7326fa4110cf5eb105c872f Mon Sep 17 00:00:00 2001 From: Deepak Sikri Date: Sat, 27 Oct 2012 14:47:48 +0530 Subject: pinctrl: SPEAr320: Correct pad mux entries for rmii/smii pin entries of rmii and smii are interchanged by mistake. Fix it. Signed-off-by: Deepak Sikri Signed-off-by: Viresh Kumar Signed-off-by: Linus Walleij --- drivers/pinctrl/spear/pinctrl-spear320.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/spear/pinctrl-spear320.c b/drivers/pinctrl/spear/pinctrl-spear320.c index 4fccf9529541..ca47b0e50780 100644 --- a/drivers/pinctrl/spear/pinctrl-spear320.c +++ b/drivers/pinctrl/spear/pinctrl-spear320.c @@ -2960,9 +2960,9 @@ static struct spear_function mii2_function = { }; /* Pad multiplexing for cadence mii 1_2 as smii or rmii device */ -static const unsigned smii0_1_pins[] = { 10, 11, 13, 14, 15, 16, 17, 18, 19, 20, +static const unsigned rmii0_1_pins[] = { 10, 11, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27 }; -static const unsigned rmii0_1_pins[] = { 10, 11, 21, 22, 23, 24, 25, 26, 27 }; +static const unsigned smii0_1_pins[] = { 10, 11, 21, 22, 23, 24, 25, 26, 27 }; static struct spear_muxreg mii0_1_muxreg[] = { { .reg = PMX_CONFIG_REG, -- cgit v1.2.3 From b06fbfdb06da61154b9498ff8e83377d3d795081 Mon Sep 17 00:00:00 2001 From: Shiraz Hashim Date: Sat, 27 Oct 2012 14:47:49 +0530 Subject: pinctrl: SPEAr1310: fix clcd high resolution pin group name All group names in SPEAr pinctrl have "_grp" at the end of their name. Do the same for clcd_high_res_grp. Signed-off-by: Shiraz Hashim Signed-off-by: Viresh Kumar Signed-off-by: Linus Walleij --- drivers/pinctrl/spear/pinctrl-spear1310.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pinctrl/spear/pinctrl-spear1310.c b/drivers/pinctrl/spear/pinctrl-spear1310.c index d6cca8c81b92..c720d09029b0 100644 --- a/drivers/pinctrl/spear/pinctrl-spear1310.c +++ b/drivers/pinctrl/spear/pinctrl-spear1310.c @@ -461,7 +461,7 @@ static struct spear_pingroup clcd_high_res_pingroup = { .nmodemuxs = ARRAY_SIZE(clcd_high_res_modemux), }; -static const char *const clcd_grps[] = { "clcd_grp", "clcd_high_res" }; +static const char *const clcd_grps[] = { "clcd_grp", "clcd_high_res_grp" }; static struct spear_function clcd_function = { .name = "clcd", .groups = clcd_grps, -- cgit v1.2.3 From 82a2deb93cb2237e3a91db6d0317571ecbd6e531 Mon Sep 17 00:00:00 2001 From: Vipul Kumar Samar Date: Sat, 27 Oct 2012 14:47:50 +0530 Subject: pinctrl: SPEAr1310: Fix value of PERIP_CFG reigster and MCIF_SEL_SHIFT This patch fixes two macros: PERIP_CFG registers offset and MCIF selection shift. Signed-off-by: Vipul Kumar Samar Signed-off-by: Viresh Kumar Signed-off-by: Linus Walleij --- drivers/pinctrl/spear/pinctrl-spear1310.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/spear/pinctrl-spear1310.c b/drivers/pinctrl/spear/pinctrl-spear1310.c index c720d09029b0..baf98ae0b1c7 100644 --- a/drivers/pinctrl/spear/pinctrl-spear1310.c +++ b/drivers/pinctrl/spear/pinctrl-spear1310.c @@ -25,8 +25,8 @@ static const struct pinctrl_pin_desc spear1310_pins[] = { }; /* registers */ -#define PERIP_CFG 0x32C - #define MCIF_SEL_SHIFT 3 +#define PERIP_CFG 0x3B0 + #define MCIF_SEL_SHIFT 5 #define MCIF_SEL_SD (0x1 << MCIF_SEL_SHIFT) #define MCIF_SEL_CF (0x2 << MCIF_SEL_SHIFT) #define MCIF_SEL_XD (0x3 << MCIF_SEL_SHIFT) -- cgit v1.2.3 From f7c5b3d574a036e401b8ccf7ee93b873561c09e4 Mon Sep 17 00:00:00 2001 From: Vipul Kumar Samar Date: Sat, 27 Oct 2012 14:47:51 +0530 Subject: pinctrl: SPEAr1310: Separate out pci pins from pcie_sata pin group SPEAr1310 has separate PCI and PCIe implementations which are not muxed with each other. Presently they have been implemented as muxed together with SATA and are represented wrongly in the software. In reality only PCIe and SATA implementations are muxed with each other. This patch separates out pci pins creating a new pingroup and function for pci. Signed-off-by: Vipul Kumar Samar Signed-off-by: Viresh Kumar Reviewed-by: Shiraz Hashim Signed-off-by: Linus Walleij --- drivers/pinctrl/spear/pinctrl-spear1310.c | 93 +++++++++++++++++-------------- 1 file changed, 51 insertions(+), 42 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/spear/pinctrl-spear1310.c b/drivers/pinctrl/spear/pinctrl-spear1310.c index baf98ae0b1c7..a25ab73a1615 100644 --- a/drivers/pinctrl/spear/pinctrl-spear1310.c +++ b/drivers/pinctrl/spear/pinctrl-spear1310.c @@ -1763,29 +1763,52 @@ static struct spear_function can1_function = { .ngroups = ARRAY_SIZE(can1_grps), }; -/* Pad multiplexing for pci device */ -static const unsigned pci_sata_pins[] = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 18, +/* Pad multiplexing for (ras-ip) pci device */ +static const unsigned pci_pins[] = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99 }; -#define PCI_SATA_MUXREG \ - { \ - .reg = PAD_FUNCTION_EN_0, \ - .mask = PMX_MCI_DATA8_15_MASK, \ - .val = 0, \ - }, { \ - .reg = PAD_FUNCTION_EN_1, \ - .mask = PMX_PCI_REG1_MASK, \ - .val = 0, \ - }, { \ - .reg = PAD_FUNCTION_EN_2, \ - .mask = PMX_PCI_REG2_MASK, \ - .val = 0, \ - } -/* pad multiplexing for pcie0 device */ +static struct spear_muxreg pci_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_0, + .mask = PMX_MCI_DATA8_15_MASK, + .val = 0, + }, { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_PCI_REG1_MASK, + .val = 0, + }, { + .reg = PAD_FUNCTION_EN_2, + .mask = PMX_PCI_REG2_MASK, + .val = 0, + }, +}; + +static struct spear_modemux pci_modemux[] = { + { + .muxregs = pci_muxreg, + .nmuxregs = ARRAY_SIZE(pci_muxreg), + }, +}; + +static struct spear_pingroup pci_pingroup = { + .name = "pci_grp", + .pins = pci_pins, + .npins = ARRAY_SIZE(pci_pins), + .modemuxs = pci_modemux, + .nmodemuxs = ARRAY_SIZE(pci_modemux), +}; + +static const char *const pci_grps[] = { "pci_grp" }; +static struct spear_function pci_function = { + .name = "pci", + .groups = pci_grps, + .ngroups = ARRAY_SIZE(pci_grps), +}; + +/* pad multiplexing for (fix-part) pcie0 device */ static struct spear_muxreg pcie0_muxreg[] = { - PCI_SATA_MUXREG, { .reg = PCIE_SATA_CFG, .mask = PCIE_CFG_VAL(0), @@ -1802,15 +1825,12 @@ static struct spear_modemux pcie0_modemux[] = { static struct spear_pingroup pcie0_pingroup = { .name = "pcie0_grp", - .pins = pci_sata_pins, - .npins = ARRAY_SIZE(pci_sata_pins), .modemuxs = pcie0_modemux, .nmodemuxs = ARRAY_SIZE(pcie0_modemux), }; -/* pad multiplexing for pcie1 device */ +/* pad multiplexing for (fix-part) pcie1 device */ static struct spear_muxreg pcie1_muxreg[] = { - PCI_SATA_MUXREG, { .reg = PCIE_SATA_CFG, .mask = PCIE_CFG_VAL(1), @@ -1827,15 +1847,12 @@ static struct spear_modemux pcie1_modemux[] = { static struct spear_pingroup pcie1_pingroup = { .name = "pcie1_grp", - .pins = pci_sata_pins, - .npins = ARRAY_SIZE(pci_sata_pins), .modemuxs = pcie1_modemux, .nmodemuxs = ARRAY_SIZE(pcie1_modemux), }; -/* pad multiplexing for pcie2 device */ +/* pad multiplexing for (fix-part) pcie2 device */ static struct spear_muxreg pcie2_muxreg[] = { - PCI_SATA_MUXREG, { .reg = PCIE_SATA_CFG, .mask = PCIE_CFG_VAL(2), @@ -1852,22 +1869,20 @@ static struct spear_modemux pcie2_modemux[] = { static struct spear_pingroup pcie2_pingroup = { .name = "pcie2_grp", - .pins = pci_sata_pins, - .npins = ARRAY_SIZE(pci_sata_pins), .modemuxs = pcie2_modemux, .nmodemuxs = ARRAY_SIZE(pcie2_modemux), }; -static const char *const pci_grps[] = { "pcie0_grp", "pcie1_grp", "pcie2_grp" }; -static struct spear_function pci_function = { - .name = "pci", - .groups = pci_grps, - .ngroups = ARRAY_SIZE(pci_grps), +static const char *const pcie_grps[] = { "pcie0_grp", "pcie1_grp", "pcie2_grp" +}; +static struct spear_function pcie_function = { + .name = "pci_express", + .groups = pcie_grps, + .ngroups = ARRAY_SIZE(pcie_grps), }; /* pad multiplexing for sata0 device */ static struct spear_muxreg sata0_muxreg[] = { - PCI_SATA_MUXREG, { .reg = PCIE_SATA_CFG, .mask = SATA_CFG_VAL(0), @@ -1884,15 +1899,12 @@ static struct spear_modemux sata0_modemux[] = { static struct spear_pingroup sata0_pingroup = { .name = "sata0_grp", - .pins = pci_sata_pins, - .npins = ARRAY_SIZE(pci_sata_pins), .modemuxs = sata0_modemux, .nmodemuxs = ARRAY_SIZE(sata0_modemux), }; /* pad multiplexing for sata1 device */ static struct spear_muxreg sata1_muxreg[] = { - PCI_SATA_MUXREG, { .reg = PCIE_SATA_CFG, .mask = SATA_CFG_VAL(1), @@ -1909,15 +1921,12 @@ static struct spear_modemux sata1_modemux[] = { static struct spear_pingroup sata1_pingroup = { .name = "sata1_grp", - .pins = pci_sata_pins, - .npins = ARRAY_SIZE(pci_sata_pins), .modemuxs = sata1_modemux, .nmodemuxs = ARRAY_SIZE(sata1_modemux), }; /* pad multiplexing for sata2 device */ static struct spear_muxreg sata2_muxreg[] = { - PCI_SATA_MUXREG, { .reg = PCIE_SATA_CFG, .mask = SATA_CFG_VAL(2), @@ -1934,8 +1943,6 @@ static struct spear_modemux sata2_modemux[] = { static struct spear_pingroup sata2_pingroup = { .name = "sata2_grp", - .pins = pci_sata_pins, - .npins = ARRAY_SIZE(pci_sata_pins), .modemuxs = sata2_modemux, .nmodemuxs = ARRAY_SIZE(sata2_modemux), }; @@ -2093,6 +2100,7 @@ static struct spear_pingroup *spear1310_pingroups[] = { &can0_dis_sd_pingroup, &can1_dis_sd_pingroup, &can1_dis_kbd_pingroup, + &pci_pingroup, &pcie0_pingroup, &pcie1_pingroup, &pcie2_pingroup, @@ -2138,6 +2146,7 @@ static struct spear_function *spear1310_functions[] = { &can0_function, &can1_function, &pci_function, + &pcie_function, &sata_function, &ssp1_function, &gpt64_function, -- cgit v1.2.3 From 0e6f1e5c39ac456d692be77d3adeb4fd7d905d27 Mon Sep 17 00:00:00 2001 From: Shiraz Hashim Date: Sat, 27 Oct 2012 14:47:52 +0530 Subject: pinctrl: SPEAr1310: add register entries for enabling pad direction Pad direction must also be updated for SPEAr1310, while setting pads values. This patch adds support for that. Signed-off-by: Shiraz Hashim Signed-off-by: Viresh Kumar Signed-off-by: Linus Walleij --- drivers/pinctrl/spear/pinctrl-spear1310.c | 266 ++++++++++++++++++++++++++++++ 1 file changed, 266 insertions(+) (limited to 'drivers') diff --git a/drivers/pinctrl/spear/pinctrl-spear1310.c b/drivers/pinctrl/spear/pinctrl-spear1310.c index a25ab73a1615..0436fc7895d6 100644 --- a/drivers/pinctrl/spear/pinctrl-spear1310.c +++ b/drivers/pinctrl/spear/pinctrl-spear1310.c @@ -164,6 +164,10 @@ static const struct pinctrl_pin_desc spear1310_pins[] = { #define PMX_SSP0_CS0_MASK (1 << 29) #define PMX_SSP0_CS1_2_MASK (1 << 30) +#define PAD_DIRECTION_SEL_0 0x65C +#define PAD_DIRECTION_SEL_1 0x660 +#define PAD_DIRECTION_SEL_2 0x664 + /* combined macros */ #define PMX_GMII_MASK (PMX_GMIICLK_MASK | \ PMX_GMIICOL_CRS_XFERER_MIITXCLK_MASK | \ @@ -237,6 +241,10 @@ static struct spear_muxreg i2c0_muxreg[] = { .reg = PAD_FUNCTION_EN_0, .mask = PMX_I2C0_MASK, .val = PMX_I2C0_MASK, + }, { + .reg = PAD_DIRECTION_SEL_0, + .mask = PMX_I2C0_MASK, + .val = PMX_I2C0_MASK, }, }; @@ -269,6 +277,10 @@ static struct spear_muxreg ssp0_muxreg[] = { .reg = PAD_FUNCTION_EN_0, .mask = PMX_SSP0_MASK, .val = PMX_SSP0_MASK, + }, { + .reg = PAD_DIRECTION_SEL_0, + .mask = PMX_SSP0_MASK, + .val = PMX_SSP0_MASK, }, }; @@ -294,6 +306,10 @@ static struct spear_muxreg ssp0_cs0_muxreg[] = { .reg = PAD_FUNCTION_EN_2, .mask = PMX_SSP0_CS0_MASK, .val = PMX_SSP0_CS0_MASK, + }, { + .reg = PAD_DIRECTION_SEL_2, + .mask = PMX_SSP0_CS0_MASK, + .val = PMX_SSP0_CS0_MASK, }, }; @@ -319,6 +335,10 @@ static struct spear_muxreg ssp0_cs1_2_muxreg[] = { .reg = PAD_FUNCTION_EN_2, .mask = PMX_SSP0_CS1_2_MASK, .val = PMX_SSP0_CS1_2_MASK, + }, { + .reg = PAD_DIRECTION_SEL_2, + .mask = PMX_SSP0_CS1_2_MASK, + .val = PMX_SSP0_CS1_2_MASK, }, }; @@ -352,6 +372,10 @@ static struct spear_muxreg i2s0_muxreg[] = { .reg = PAD_FUNCTION_EN_0, .mask = PMX_I2S0_MASK, .val = PMX_I2S0_MASK, + }, { + .reg = PAD_DIRECTION_SEL_0, + .mask = PMX_I2S0_MASK, + .val = PMX_I2S0_MASK, }, }; @@ -384,6 +408,10 @@ static struct spear_muxreg i2s1_muxreg[] = { .reg = PAD_FUNCTION_EN_1, .mask = PMX_I2S1_MASK, .val = PMX_I2S1_MASK, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_I2S1_MASK, + .val = PMX_I2S1_MASK, }, }; @@ -418,6 +446,10 @@ static struct spear_muxreg clcd_muxreg[] = { .reg = PAD_FUNCTION_EN_0, .mask = PMX_CLCD1_MASK, .val = PMX_CLCD1_MASK, + }, { + .reg = PAD_DIRECTION_SEL_0, + .mask = PMX_CLCD1_MASK, + .val = PMX_CLCD1_MASK, }, }; @@ -443,6 +475,10 @@ static struct spear_muxreg clcd_high_res_muxreg[] = { .reg = PAD_FUNCTION_EN_1, .mask = PMX_CLCD2_MASK, .val = PMX_CLCD2_MASK, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_CLCD2_MASK, + .val = PMX_CLCD2_MASK, }, }; @@ -479,6 +515,14 @@ static struct spear_muxreg arm_gpio_muxreg[] = { .reg = PAD_FUNCTION_EN_1, .mask = PMX_EGPIO_1_GRP_MASK, .val = PMX_EGPIO_1_GRP_MASK, + }, { + .reg = PAD_DIRECTION_SEL_0, + .mask = PMX_EGPIO_0_GRP_MASK, + .val = PMX_EGPIO_0_GRP_MASK, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_EGPIO_1_GRP_MASK, + .val = PMX_EGPIO_1_GRP_MASK, }, }; @@ -511,6 +555,10 @@ static struct spear_muxreg smi_2_chips_muxreg[] = { .reg = PAD_FUNCTION_EN_0, .mask = PMX_SMI_MASK, .val = PMX_SMI_MASK, + }, { + .reg = PAD_DIRECTION_SEL_0, + .mask = PMX_SMI_MASK, + .val = PMX_SMI_MASK, }, }; @@ -539,6 +587,14 @@ static struct spear_muxreg smi_4_chips_muxreg[] = { .reg = PAD_FUNCTION_EN_1, .mask = PMX_SMINCS2_MASK | PMX_SMINCS3_MASK, .val = PMX_SMINCS2_MASK | PMX_SMINCS3_MASK, + }, { + .reg = PAD_DIRECTION_SEL_0, + .mask = PMX_SMI_MASK, + .val = PMX_SMI_MASK, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_SMINCS2_MASK | PMX_SMINCS3_MASK, + .val = PMX_SMINCS2_MASK | PMX_SMINCS3_MASK, }, }; @@ -573,6 +629,10 @@ static struct spear_muxreg gmii_muxreg[] = { .reg = PAD_FUNCTION_EN_0, .mask = PMX_GMII_MASK, .val = PMX_GMII_MASK, + }, { + .reg = PAD_DIRECTION_SEL_0, + .mask = PMX_GMII_MASK, + .val = PMX_GMII_MASK, }, }; @@ -615,6 +675,18 @@ static struct spear_muxreg rgmii_muxreg[] = { .reg = PAD_FUNCTION_EN_2, .mask = PMX_RGMII_REG2_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_0, + .mask = PMX_RGMII_REG0_MASK, + .val = PMX_RGMII_REG0_MASK, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_RGMII_REG1_MASK, + .val = PMX_RGMII_REG1_MASK, + }, { + .reg = PAD_DIRECTION_SEL_2, + .mask = PMX_RGMII_REG2_MASK, + .val = PMX_RGMII_REG2_MASK, }, }; @@ -649,6 +721,10 @@ static struct spear_muxreg smii_0_1_2_muxreg[] = { .reg = PAD_FUNCTION_EN_1, .mask = PMX_SMII_0_1_2_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_SMII_0_1_2_MASK, + .val = PMX_SMII_0_1_2_MASK, }, }; @@ -681,6 +757,10 @@ static struct spear_muxreg ras_mii_txclk_muxreg[] = { .reg = PAD_FUNCTION_EN_1, .mask = PMX_NFCE2_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_NFCE2_MASK, + .val = PMX_NFCE2_MASK, }, }; @@ -721,6 +801,14 @@ static struct spear_muxreg nand_8bit_muxreg[] = { .reg = PAD_FUNCTION_EN_1, .mask = PMX_NAND8BIT_1_MASK, .val = PMX_NAND8BIT_1_MASK, + }, { + .reg = PAD_DIRECTION_SEL_0, + .mask = PMX_NAND8BIT_0_MASK, + .val = PMX_NAND8BIT_0_MASK, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_NAND8BIT_1_MASK, + .val = PMX_NAND8BIT_1_MASK, }, }; @@ -747,6 +835,10 @@ static struct spear_muxreg nand_16bit_muxreg[] = { .reg = PAD_FUNCTION_EN_1, .mask = PMX_NAND16BIT_1_MASK, .val = PMX_NAND16BIT_1_MASK, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_NAND16BIT_1_MASK, + .val = PMX_NAND16BIT_1_MASK, }, }; @@ -772,6 +864,10 @@ static struct spear_muxreg nand_4_chips_muxreg[] = { .reg = PAD_FUNCTION_EN_1, .mask = PMX_NAND_4CHIPS_MASK, .val = PMX_NAND_4CHIPS_MASK, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_NAND_4CHIPS_MASK, + .val = PMX_NAND_4CHIPS_MASK, }, }; @@ -833,6 +929,10 @@ static struct spear_muxreg keyboard_rowcol6_8_muxreg[] = { .reg = PAD_FUNCTION_EN_1, .mask = PMX_KBD_ROWCOL68_MASK, .val = PMX_KBD_ROWCOL68_MASK, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_KBD_ROWCOL68_MASK, + .val = PMX_KBD_ROWCOL68_MASK, }, }; @@ -866,6 +966,10 @@ static struct spear_muxreg uart0_muxreg[] = { .reg = PAD_FUNCTION_EN_0, .mask = PMX_UART0_MASK, .val = PMX_UART0_MASK, + }, { + .reg = PAD_DIRECTION_SEL_0, + .mask = PMX_UART0_MASK, + .val = PMX_UART0_MASK, }, }; @@ -891,6 +995,10 @@ static struct spear_muxreg uart0_modem_muxreg[] = { .reg = PAD_FUNCTION_EN_1, .mask = PMX_UART0_MODEM_MASK, .val = PMX_UART0_MODEM_MASK, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_UART0_MODEM_MASK, + .val = PMX_UART0_MODEM_MASK, }, }; @@ -923,6 +1031,10 @@ static struct spear_muxreg gpt0_tmr0_muxreg[] = { .reg = PAD_FUNCTION_EN_1, .mask = PMX_GPT0_TMR0_MASK, .val = PMX_GPT0_TMR0_MASK, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_GPT0_TMR0_MASK, + .val = PMX_GPT0_TMR0_MASK, }, }; @@ -948,6 +1060,10 @@ static struct spear_muxreg gpt0_tmr1_muxreg[] = { .reg = PAD_FUNCTION_EN_1, .mask = PMX_GPT0_TMR1_MASK, .val = PMX_GPT0_TMR1_MASK, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_GPT0_TMR1_MASK, + .val = PMX_GPT0_TMR1_MASK, }, }; @@ -980,6 +1096,10 @@ static struct spear_muxreg gpt1_tmr0_muxreg[] = { .reg = PAD_FUNCTION_EN_1, .mask = PMX_GPT1_TMR0_MASK, .val = PMX_GPT1_TMR0_MASK, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_GPT1_TMR0_MASK, + .val = PMX_GPT1_TMR0_MASK, }, }; @@ -1005,6 +1125,10 @@ static struct spear_muxreg gpt1_tmr1_muxreg[] = { .reg = PAD_FUNCTION_EN_1, .mask = PMX_GPT1_TMR1_MASK, .val = PMX_GPT1_TMR1_MASK, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_GPT1_TMR1_MASK, + .val = PMX_GPT1_TMR1_MASK, }, }; @@ -1049,6 +1173,20 @@ static const unsigned mcif_pins[] = { 86, 87, 88, 89, 90, 91, 92, 93, 213, 214, .reg = PAD_FUNCTION_EN_2, \ .mask = PMX_MCIFALL_2_MASK, \ .val = PMX_MCIFALL_2_MASK, \ + }, { \ + .reg = PAD_DIRECTION_SEL_0, \ + .mask = PMX_MCI_DATA8_15_MASK, \ + .val = PMX_MCI_DATA8_15_MASK, \ + }, { \ + .reg = PAD_DIRECTION_SEL_1, \ + .mask = PMX_MCIFALL_1_MASK | PMX_NFWPRT1_MASK | \ + PMX_NFWPRT2_MASK, \ + .val = PMX_MCIFALL_1_MASK | PMX_NFWPRT1_MASK | \ + PMX_NFWPRT2_MASK, \ + }, { \ + .reg = PAD_DIRECTION_SEL_2, \ + .mask = PMX_MCIFALL_2_MASK, \ + .val = PMX_MCIFALL_2_MASK, \ } /* sdhci device */ @@ -1154,6 +1292,10 @@ static struct spear_muxreg touch_xy_muxreg[] = { .reg = PAD_FUNCTION_EN_2, .mask = PMX_TOUCH_XY_MASK, .val = PMX_TOUCH_XY_MASK, + }, { + .reg = PAD_DIRECTION_SEL_2, + .mask = PMX_TOUCH_XY_MASK, + .val = PMX_TOUCH_XY_MASK, }, }; @@ -1187,6 +1329,10 @@ static struct spear_muxreg uart1_dis_i2c_muxreg[] = { .reg = PAD_FUNCTION_EN_0, .mask = PMX_I2C0_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_0, + .mask = PMX_I2C0_MASK, + .val = PMX_I2C0_MASK, }, }; @@ -1213,6 +1359,12 @@ static struct spear_muxreg uart1_dis_sd_muxreg[] = { .mask = PMX_MCIDATA1_MASK | PMX_MCIDATA2_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_MCIDATA1_MASK | + PMX_MCIDATA2_MASK, + .val = PMX_MCIDATA1_MASK | + PMX_MCIDATA2_MASK, }, }; @@ -1246,6 +1398,10 @@ static struct spear_muxreg uart2_3_muxreg[] = { .reg = PAD_FUNCTION_EN_0, .mask = PMX_I2S0_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_0, + .mask = PMX_I2S0_MASK, + .val = PMX_I2S0_MASK, }, }; @@ -1278,6 +1434,10 @@ static struct spear_muxreg uart4_muxreg[] = { .reg = PAD_FUNCTION_EN_0, .mask = PMX_I2S0_MASK | PMX_CLCD1_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_0, + .mask = PMX_I2S0_MASK | PMX_CLCD1_MASK, + .val = PMX_I2S0_MASK | PMX_CLCD1_MASK, }, }; @@ -1310,6 +1470,10 @@ static struct spear_muxreg uart5_muxreg[] = { .reg = PAD_FUNCTION_EN_0, .mask = PMX_CLCD1_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_0, + .mask = PMX_CLCD1_MASK, + .val = PMX_CLCD1_MASK, }, }; @@ -1344,6 +1508,10 @@ static struct spear_muxreg rs485_0_1_tdm_0_1_muxreg[] = { .reg = PAD_FUNCTION_EN_0, .mask = PMX_CLCD1_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_0, + .mask = PMX_CLCD1_MASK, + .val = PMX_CLCD1_MASK, }, }; @@ -1376,6 +1544,10 @@ static struct spear_muxreg i2c_1_2_muxreg[] = { .reg = PAD_FUNCTION_EN_0, .mask = PMX_CLCD1_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_0, + .mask = PMX_CLCD1_MASK, + .val = PMX_CLCD1_MASK, }, }; @@ -1409,6 +1581,10 @@ static struct spear_muxreg i2c3_dis_smi_clcd_muxreg[] = { .reg = PAD_FUNCTION_EN_0, .mask = PMX_CLCD1_MASK | PMX_SMI_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_0, + .mask = PMX_CLCD1_MASK | PMX_SMI_MASK, + .val = PMX_CLCD1_MASK | PMX_SMI_MASK, }, }; @@ -1435,6 +1611,10 @@ static struct spear_muxreg i2c3_dis_sd_i2s0_muxreg[] = { .reg = PAD_FUNCTION_EN_1, .mask = PMX_I2S1_MASK | PMX_MCIDATA3_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_I2S1_MASK | PMX_MCIDATA3_MASK, + .val = PMX_I2S1_MASK | PMX_MCIDATA3_MASK, }, }; @@ -1469,6 +1649,10 @@ static struct spear_muxreg i2c_4_5_dis_smi_muxreg[] = { .reg = PAD_FUNCTION_EN_0, .mask = PMX_SMI_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_0, + .mask = PMX_SMI_MASK, + .val = PMX_SMI_MASK, }, }; @@ -1499,6 +1683,14 @@ static struct spear_muxreg i2c4_dis_sd_muxreg[] = { .reg = PAD_FUNCTION_EN_2, .mask = PMX_MCIDATA5_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_MCIDATA4_MASK, + .val = PMX_MCIDATA4_MASK, + }, { + .reg = PAD_DIRECTION_SEL_2, + .mask = PMX_MCIDATA5_MASK, + .val = PMX_MCIDATA5_MASK, }, }; @@ -1526,6 +1718,12 @@ static struct spear_muxreg i2c5_dis_sd_muxreg[] = { .mask = PMX_MCIDATA6_MASK | PMX_MCIDATA7_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_2, + .mask = PMX_MCIDATA6_MASK | + PMX_MCIDATA7_MASK, + .val = PMX_MCIDATA6_MASK | + PMX_MCIDATA7_MASK, }, }; @@ -1560,6 +1758,10 @@ static struct spear_muxreg i2c_6_7_dis_kbd_muxreg[] = { .reg = PAD_FUNCTION_EN_1, .mask = PMX_KBD_ROWCOL25_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_KBD_ROWCOL25_MASK, + .val = PMX_KBD_ROWCOL25_MASK, }, }; @@ -1587,6 +1789,12 @@ static struct spear_muxreg i2c6_dis_sd_muxreg[] = { .mask = PMX_MCIIORDRE_MASK | PMX_MCIIOWRWE_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_2, + .mask = PMX_MCIIORDRE_MASK | + PMX_MCIIOWRWE_MASK, + .val = PMX_MCIIORDRE_MASK | + PMX_MCIIOWRWE_MASK, }, }; @@ -1613,6 +1821,12 @@ static struct spear_muxreg i2c7_dis_sd_muxreg[] = { .mask = PMX_MCIRESETCF_MASK | PMX_MCICS0CE_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_2, + .mask = PMX_MCIRESETCF_MASK | + PMX_MCICS0CE_MASK, + .val = PMX_MCIRESETCF_MASK | + PMX_MCICS0CE_MASK, }, }; @@ -1651,6 +1865,14 @@ static struct spear_muxreg can0_dis_nor_muxreg[] = { .reg = PAD_FUNCTION_EN_1, .mask = PMX_NFRSTPWDWN3_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_0, + .mask = PMX_NFRSTPWDWN2_MASK, + .val = PMX_NFRSTPWDWN2_MASK, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_NFRSTPWDWN3_MASK, + .val = PMX_NFRSTPWDWN3_MASK, }, }; @@ -1677,6 +1899,10 @@ static struct spear_muxreg can0_dis_sd_muxreg[] = { .reg = PAD_FUNCTION_EN_2, .mask = PMX_MCICFINTR_MASK | PMX_MCIIORDY_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_2, + .mask = PMX_MCICFINTR_MASK | PMX_MCIIORDY_MASK, + .val = PMX_MCICFINTR_MASK | PMX_MCIIORDY_MASK, }, }; @@ -1711,6 +1937,10 @@ static struct spear_muxreg can1_dis_sd_muxreg[] = { .reg = PAD_FUNCTION_EN_2, .mask = PMX_MCICS1_MASK | PMX_MCIDMAACK_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_2, + .mask = PMX_MCICS1_MASK | PMX_MCIDMAACK_MASK, + .val = PMX_MCICS1_MASK | PMX_MCIDMAACK_MASK, }, }; @@ -1737,6 +1967,10 @@ static struct spear_muxreg can1_dis_kbd_muxreg[] = { .reg = PAD_FUNCTION_EN_1, .mask = PMX_KBD_ROWCOL25_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_KBD_ROWCOL25_MASK, + .val = PMX_KBD_ROWCOL25_MASK, }, }; @@ -1782,6 +2016,18 @@ static struct spear_muxreg pci_muxreg[] = { .reg = PAD_FUNCTION_EN_2, .mask = PMX_PCI_REG2_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_0, + .mask = PMX_MCI_DATA8_15_MASK, + .val = PMX_MCI_DATA8_15_MASK, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_PCI_REG1_MASK, + .val = PMX_PCI_REG1_MASK, + }, { + .reg = PAD_DIRECTION_SEL_2, + .mask = PMX_PCI_REG2_MASK, + .val = PMX_PCI_REG2_MASK, }, }; @@ -1964,6 +2210,14 @@ static struct spear_muxreg ssp1_dis_kbd_muxreg[] = { PMX_KBD_COL0_MASK | PMX_NFIO8_15_MASK | PMX_NFCE1_MASK | PMX_NFCE2_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_1, + .mask = PMX_KBD_ROWCOL25_MASK | PMX_KBD_COL1_MASK | + PMX_KBD_COL0_MASK | PMX_NFIO8_15_MASK | PMX_NFCE1_MASK | + PMX_NFCE2_MASK, + .val = PMX_KBD_ROWCOL25_MASK | PMX_KBD_COL1_MASK | + PMX_KBD_COL0_MASK | PMX_NFIO8_15_MASK | PMX_NFCE1_MASK | + PMX_NFCE2_MASK, }, }; @@ -1990,6 +2244,12 @@ static struct spear_muxreg ssp1_dis_sd_muxreg[] = { .mask = PMX_MCIADDR0ALE_MASK | PMX_MCIADDR2_MASK | PMX_MCICECF_MASK | PMX_MCICEXD_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_2, + .mask = PMX_MCIADDR0ALE_MASK | PMX_MCIADDR2_MASK | + PMX_MCICECF_MASK | PMX_MCICEXD_MASK, + .val = PMX_MCIADDR0ALE_MASK | PMX_MCIADDR2_MASK | + PMX_MCICECF_MASK | PMX_MCICEXD_MASK, }, }; @@ -2024,6 +2284,12 @@ static struct spear_muxreg gpt64_muxreg[] = { .mask = PMX_MCICDCF1_MASK | PMX_MCICDCF2_MASK | PMX_MCICDXD_MASK | PMX_MCILEDS_MASK, .val = 0, + }, { + .reg = PAD_DIRECTION_SEL_2, + .mask = PMX_MCICDCF1_MASK | PMX_MCICDCF2_MASK | PMX_MCICDXD_MASK + | PMX_MCILEDS_MASK, + .val = PMX_MCICDCF1_MASK | PMX_MCICDCF2_MASK | PMX_MCICDXD_MASK + | PMX_MCILEDS_MASK, }, }; -- cgit v1.2.3 From 35d14806948f0e97e86c3199489ff6a826df1a3c Mon Sep 17 00:00:00 2001 From: Deepak Sikri Date: Sat, 27 Oct 2012 14:47:53 +0530 Subject: pinctrl: SPEAr1340: Make DDR reset & clock pads as gpio Some gpio pins are used to control DDR reset and clock enable while the system is moved into Low power. This patch adds in the corresponding GPIO entries in the pads_as_gpio_pins to ensure the pads are available as gpio's. Signed-off-by: Deepak Sikri Signed-off-by: Viresh Kumar Signed-off-by: Linus Walleij --- drivers/pinctrl/spear/pinctrl-spear1340.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pinctrl/spear/pinctrl-spear1340.c b/drivers/pinctrl/spear/pinctrl-spear1340.c index a0eb057e55bd..3963675d514f 100644 --- a/drivers/pinctrl/spear/pinctrl-spear1340.c +++ b/drivers/pinctrl/spear/pinctrl-spear1340.c @@ -213,7 +213,7 @@ static const struct pinctrl_pin_desc spear1340_pins[] = { * Pad multiplexing for making all pads as gpio's. This is done to override the * values passed from bootloader and start from scratch. */ -static const unsigned pads_as_gpio_pins[] = { 251 }; +static const unsigned pads_as_gpio_pins[] = { 12, 88, 89, 251 }; static struct spear_muxreg pads_as_gpio_muxreg[] = { { .reg = PAD_FUNCTION_EN_1, -- cgit v1.2.3 From 0504271c8dfe2247401de4f153e9224535e622c2 Mon Sep 17 00:00:00 2001 From: Vipul Kumar Samar Date: Sat, 27 Oct 2012 14:47:54 +0530 Subject: pinctrl: SPEAr1340: Add clcd sleep mode pin configuration CLCD pads must be configured differently for sleep mode. This patch adds support for clcd_sleep_pingroup. Signed-off-by: Vipul Kumar Samar Signed-off-by: Viresh Kumar Signed-off-by: Linus Walleij --- drivers/pinctrl/spear/pinctrl-spear1340.c | 39 ++++++++++++++++++++++++++++++- 1 file changed, 38 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pinctrl/spear/pinctrl-spear1340.c b/drivers/pinctrl/spear/pinctrl-spear1340.c index 3963675d514f..0606b8cf3f2c 100644 --- a/drivers/pinctrl/spear/pinctrl-spear1340.c +++ b/drivers/pinctrl/spear/pinctrl-spear1340.c @@ -1692,7 +1692,43 @@ static struct spear_pingroup clcd_pingroup = { .nmodemuxs = ARRAY_SIZE(clcd_modemux), }; -static const char *const clcd_grps[] = { "clcd_grp" }; +/* Disable cld runtime to save panel damage */ +static struct spear_muxreg clcd_sleep_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = ARM_TRACE_MASK | MIPHY_DBG_MASK, + .val = 0, + }, { + .reg = PAD_FUNCTION_EN_5, + .mask = CLCD_REG4_MASK | CLCD_AND_ARM_TRACE_REG4_MASK, + .val = 0x0, + }, { + .reg = PAD_FUNCTION_EN_6, + .mask = CLCD_AND_ARM_TRACE_REG5_MASK, + .val = 0x0, + }, { + .reg = PAD_FUNCTION_EN_7, + .mask = CLCD_AND_ARM_TRACE_REG6_MASK, + .val = 0x0, + }, +}; + +static struct spear_modemux clcd_sleep_modemux[] = { + { + .muxregs = clcd_sleep_muxreg, + .nmuxregs = ARRAY_SIZE(clcd_sleep_muxreg), + }, +}; + +static struct spear_pingroup clcd_sleep_pingroup = { + .name = "clcd_sleep_grp", + .pins = clcd_pins, + .npins = ARRAY_SIZE(clcd_pins), + .modemuxs = clcd_sleep_modemux, + .nmodemuxs = ARRAY_SIZE(clcd_sleep_modemux), +}; + +static const char *const clcd_grps[] = { "clcd_grp", "clcd_sleep_grp" }; static struct spear_function clcd_function = { .name = "clcd", .groups = clcd_grps, @@ -1893,6 +1929,7 @@ static struct spear_pingroup *spear1340_pingroups[] = { &sdhci_pingroup, &cf_pingroup, &xd_pingroup, + &clcd_sleep_pingroup, &clcd_pingroup, &arm_trace_pingroup, &miphy_dbg_pingroup, -- cgit v1.2.3 From 7c34158231b2eda8dcbd297be2bb1559e69cb433 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 4 Nov 2012 09:29:17 +0100 Subject: iwlwifi: handle DMA mapping failures The RX replenish code doesn't handle DMA mapping failures, which will cause issues if there actually is a failure. This was reported by Shuah Khan who found a DMA mapping framework warning ("device driver failed to check map error"). Cc: stable@vger.kernel.org Reported-by: Shuah Khan Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/rx.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index 17c8e5d82681..bb69f8f90b3b 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -321,6 +321,14 @@ static void iwl_rx_allocate(struct iwl_trans *trans, gfp_t priority) dma_map_page(trans->dev, page, 0, PAGE_SIZE << trans_pcie->rx_page_order, DMA_FROM_DEVICE); + if (dma_mapping_error(trans->dev, rxb->page_dma)) { + rxb->page = NULL; + spin_lock_irqsave(&rxq->lock, flags); + list_add(&rxb->list, &rxq->rx_used); + spin_unlock_irqrestore(&rxq->lock, flags); + __free_pages(page, trans_pcie->rx_page_order); + return; + } /* dma address must be no more than 36 bits */ BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36)); /* and also 256 byte aligned! */ @@ -488,8 +496,19 @@ static void iwl_rx_handle_rxbuf(struct iwl_trans *trans, dma_map_page(trans->dev, rxb->page, 0, PAGE_SIZE << trans_pcie->rx_page_order, DMA_FROM_DEVICE); - list_add_tail(&rxb->list, &rxq->rx_free); - rxq->free_count++; + if (dma_mapping_error(trans->dev, rxb->page_dma)) { + /* + * free the page(s) as well to not break + * the invariant that the items on the used + * list have no page(s) + */ + __free_pages(rxb->page, trans_pcie->rx_page_order); + rxb->page = NULL; + list_add_tail(&rxb->list, &rxq->rx_used); + } else { + list_add_tail(&rxb->list, &rxq->rx_free); + rxq->free_count++; + } } else list_add_tail(&rxb->list, &rxq->rx_used); spin_unlock_irqrestore(&rxq->lock, flags); -- cgit v1.2.3 From b3c32c4f9565f93407921c0d8a4458042eb8998e Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Thu, 25 Oct 2012 09:36:03 +0800 Subject: PCI/PM: Fix proc config reg access for D3cold and bridge suspending In https://bugzilla.kernel.org/show_bug.cgi?id=48981 Peter reported that /proc/bus/pci/??/??.? does not work for 3.6. This is because the device configuration space registers are not accessible if the corresponding parent bridge is suspended or the device is put into D3cold state. This is the same as /sys/bus/pci/devices/0000:??:??.?/config access issue. So the function used to solve sysfs issue is used to solve this issue. This patch moves pci_config_pm_runtime_get()/_put() from pci/pci-sysfs.c to pci/pci.c and makes them extern so they can be used by both the sysfs and proc paths. [bhelgaas: changelog, references, reporters] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=48981 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=49031 Reported-by: Forrest Loomis Reported-by: Peter Reported-by: Micael Dias Signed-off-by: Huang Ying Signed-off-by: Bjorn Helgaas Acked-by: Rafael J. Wysocki CC: stable@vger.kernel.org # v3.6+ --- drivers/pci/pci-sysfs.c | 34 ---------------------------------- drivers/pci/pci.c | 32 ++++++++++++++++++++++++++++++++ drivers/pci/pci.h | 2 ++ drivers/pci/proc.c | 8 ++++++++ 4 files changed, 42 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 02d107b15281..f39378d9da15 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -458,40 +458,6 @@ boot_vga_show(struct device *dev, struct device_attribute *attr, char *buf) } struct device_attribute vga_attr = __ATTR_RO(boot_vga); -static void -pci_config_pm_runtime_get(struct pci_dev *pdev) -{ - struct device *dev = &pdev->dev; - struct device *parent = dev->parent; - - if (parent) - pm_runtime_get_sync(parent); - pm_runtime_get_noresume(dev); - /* - * pdev->current_state is set to PCI_D3cold during suspending, - * so wait until suspending completes - */ - pm_runtime_barrier(dev); - /* - * Only need to resume devices in D3cold, because config - * registers are still accessible for devices suspended but - * not in D3cold. - */ - if (pdev->current_state == PCI_D3cold) - pm_runtime_resume(dev); -} - -static void -pci_config_pm_runtime_put(struct pci_dev *pdev) -{ - struct device *dev = &pdev->dev; - struct device *parent = dev->parent; - - pm_runtime_put(dev); - if (parent) - pm_runtime_put_sync(parent); -} - static ssize_t pci_read_config(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 54858838f098..aabf64798bda 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1858,6 +1858,38 @@ bool pci_dev_run_wake(struct pci_dev *dev) } EXPORT_SYMBOL_GPL(pci_dev_run_wake); +void pci_config_pm_runtime_get(struct pci_dev *pdev) +{ + struct device *dev = &pdev->dev; + struct device *parent = dev->parent; + + if (parent) + pm_runtime_get_sync(parent); + pm_runtime_get_noresume(dev); + /* + * pdev->current_state is set to PCI_D3cold during suspending, + * so wait until suspending completes + */ + pm_runtime_barrier(dev); + /* + * Only need to resume devices in D3cold, because config + * registers are still accessible for devices suspended but + * not in D3cold. + */ + if (pdev->current_state == PCI_D3cold) + pm_runtime_resume(dev); +} + +void pci_config_pm_runtime_put(struct pci_dev *pdev) +{ + struct device *dev = &pdev->dev; + struct device *parent = dev->parent; + + pm_runtime_put(dev); + if (parent) + pm_runtime_put_sync(parent); +} + /** * pci_pm_init - Initialize PM functions of given PCI device * @dev: PCI device to handle. diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index bacbcba69cf3..fd92aab9904b 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -72,6 +72,8 @@ extern void pci_disable_enabled_device(struct pci_dev *dev); extern int pci_finish_runtime_suspend(struct pci_dev *dev); extern int __pci_pme_wakeup(struct pci_dev *dev, void *ign); extern void pci_wakeup_bus(struct pci_bus *bus); +extern void pci_config_pm_runtime_get(struct pci_dev *dev); +extern void pci_config_pm_runtime_put(struct pci_dev *dev); extern void pci_pm_init(struct pci_dev *dev); extern void platform_pci_wakeup_init(struct pci_dev *dev); extern void pci_allocate_cap_save_buffers(struct pci_dev *dev); diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c index eb907a8faf2a..9b8505ccc56d 100644 --- a/drivers/pci/proc.c +++ b/drivers/pci/proc.c @@ -76,6 +76,8 @@ proc_bus_pci_read(struct file *file, char __user *buf, size_t nbytes, loff_t *pp if (!access_ok(VERIFY_WRITE, buf, cnt)) return -EINVAL; + pci_config_pm_runtime_get(dev); + if ((pos & 1) && cnt) { unsigned char val; pci_user_read_config_byte(dev, pos, &val); @@ -121,6 +123,8 @@ proc_bus_pci_read(struct file *file, char __user *buf, size_t nbytes, loff_t *pp cnt--; } + pci_config_pm_runtime_put(dev); + *ppos = pos; return nbytes; } @@ -146,6 +150,8 @@ proc_bus_pci_write(struct file *file, const char __user *buf, size_t nbytes, lof if (!access_ok(VERIFY_READ, buf, cnt)) return -EINVAL; + pci_config_pm_runtime_get(dev); + if ((pos & 1) && cnt) { unsigned char val; __get_user(val, buf); @@ -191,6 +197,8 @@ proc_bus_pci_write(struct file *file, const char __user *buf, size_t nbytes, lof cnt--; } + pci_config_pm_runtime_put(dev); + *ppos = pos; i_size_write(ino, dp->size); return nbytes; -- cgit v1.2.3 From 3300fb4f88688029fff8dfb9ec0734f6e4cba3e7 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 5 Nov 2012 21:54:39 +0100 Subject: hwmon: (w83627ehf) Force initial bank selection Don't assume bank 0 is selected at device probe time. This may not be the case. Force bank selection at first register access to guarantee that we read the right registers upon driver loading. Signed-off-by: Jean Delvare Reviewed-by: Guenter Roeck Cc: stable@vger.kernel.org --- drivers/hwmon/w83627ehf.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 1821b7423d5b..de3c7e04c3b5 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -2083,6 +2083,7 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev) mutex_init(&data->lock); mutex_init(&data->update_lock); data->name = w83627ehf_device_names[sio_data->kind]; + data->bank = 0xff; /* Force initial bank selection */ platform_set_drvdata(pdev, data); /* 627EHG and 627EHF have 10 voltage inputs; 627DHG and 667HG have 9 */ -- cgit v1.2.3 From 4101ece3a226e68a5335dd8a15c7ab8663972b81 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 5 Nov 2012 21:54:40 +0100 Subject: hwmon: Fix chip feature table headers These got broken by recent patches fixing checkpatch warnings in these drivers. The trick is that the patches themselves looked good, but the source files after applying them do not. That's why I am not a big fan of using tabs inside comments. Signed-off-by: Jean Delvare Acked-by: Guenter Roeck --- drivers/hwmon/asb100.c | 2 +- drivers/hwmon/w83627hf.c | 2 +- drivers/hwmon/w83781d.c | 2 +- drivers/hwmon/w83791d.c | 2 +- drivers/hwmon/w83792d.c | 2 +- drivers/hwmon/w83l786ng.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c index a227be47149f..520e5bf4f76d 100644 --- a/drivers/hwmon/asb100.c +++ b/drivers/hwmon/asb100.c @@ -32,7 +32,7 @@ * ASB100-A supports pwm1, while plain ASB100 does not. There is no known * way for the driver to tell which one is there. * - * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA + * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA * asb100 7 3 1 4 0x31 0x0694 yes no */ diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 5b1a6a666441..af1589908709 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -25,7 +25,7 @@ /* * Supports following chips: * - * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA + * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA * w83627hf 9 3 2 3 0x20 0x5ca3 no yes(LPC) * w83627thf 7 3 3 3 0x90 0x5ca3 no yes(LPC) * w83637hf 7 3 3 3 0x80 0x5ca3 no yes(LPC) diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index 5a5046d94c3e..20f11d31da40 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -24,7 +24,7 @@ /* * Supports following chips: * - * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA + * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA * as99127f 7 3 0 3 0x31 0x12c3 yes no * as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no * w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index 39ab7bcc616e..ed397c645198 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -22,7 +22,7 @@ /* * Supports following chips: * - * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA + * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA * w83791d 10 5 5 3 0x71 0x5ca3 yes no * * The w83791d chip appears to be part way between the 83781d and the diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index 053645279f38..301942d08453 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -31,7 +31,7 @@ /* * Supports following chips: * - * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA + * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA * w83792d 9 7 7 3 0x7a 0x5ca3 yes no */ diff --git a/drivers/hwmon/w83l786ng.c b/drivers/hwmon/w83l786ng.c index f0e8286c3c70..79710bcac2f7 100644 --- a/drivers/hwmon/w83l786ng.c +++ b/drivers/hwmon/w83l786ng.c @@ -20,7 +20,7 @@ /* * Supports following chips: * - * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA + * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA * w83l786ng 3 2 2 2 0x7b 0x5ca3 yes no */ -- cgit v1.2.3 From ff8e59bc4ec3f31789a47dce9b6fe44bd7bc5fcc Mon Sep 17 00:00:00 2001 From: Taku Izumi Date: Wed, 31 Oct 2012 09:51:48 +0900 Subject: PCI/portdrv: Don't create hotplug slots unless port supports hotplug Commit 2dcfaf85 mistakenly dropped the "flags & PCI_EXP_FLAGS_SLOT" test, so now we create hotplug slots even for PCIe port devices that don't support hotplug. This patch fixes this problem. [bhelgaas: changelog] Signed-off-by: Taku Izumi Signed-off-by: Bjorn Helgaas Acked-by: Yinghai Lu Reviewed-by: Jiang Liu --- drivers/pci/pcie/portdrv_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index d03a7a39b2d8..ed129b414624 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -272,7 +272,8 @@ static int get_port_device_capability(struct pci_dev *dev) } /* Hot-Plug Capable */ - if (cap_mask & PCIE_PORT_SERVICE_HP) { + if ((cap_mask & PCIE_PORT_SERVICE_HP) && + dev->pcie_flags_reg & PCI_EXP_FLAGS_SLOT) { pcie_capability_read_dword(dev, PCI_EXP_SLTCAP, ®32); if (reg32 & PCI_EXP_SLTCAP_HPC) { services |= PCIE_PORT_SERVICE_HP; -- cgit v1.2.3 From 924da31416f20a8ee7a9008dd4e6e6054bc36b1b Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 6 Nov 2012 15:04:30 +0800 Subject: pinctrl: samsung and exynos need to depend on OF && GPIOLIB This patch fixes below build error when !CONFIG_OF_GPIO. CC drivers/pinctrl/pinctrl-samsung.o drivers/pinctrl/pinctrl-samsung.c: In function 'samsung_pinctrl_parse_dt_pins': drivers/pinctrl/pinctrl-samsung.c:557:19: warning: unused variable 'prop' [-Wunused-variable] drivers/pinctrl/pinctrl-samsung.c: In function 'samsung_gpiolib_register': drivers/pinctrl/pinctrl-samsung.c:797:5: error: 'struct gpio_chip' has no member named 'of_node' make[2]: *** [drivers/pinctrl/pinctrl-samsung.o] Error 1 make[1]: *** [drivers/pinctrl] Error 2 make: *** [drivers] Error 2 The samsung pinctrl driver supports only device tree enabled platforms. Thus make PINCTRL_SAMSUNG depend on OF && GPIOLIB. The reason to depend on GPIOLIB is CONFIG_OF_GPIO only available when GPIOLIB is selected. Since PINCTRL_EXYNOS4 select PINCTRL_SAMSUNG, thus also make PINCTRL_EXYNOS4 depend on OF && GPIOLIB. Signed-off-by: Axel Lin Signed-off-by: Linus Walleij --- drivers/pinctrl/Kconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 7bf914df6e91..d96caefd914a 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -179,11 +179,13 @@ config PINCTRL_COH901 config PINCTRL_SAMSUNG bool "Samsung pinctrl driver" + depends on OF && GPIOLIB select PINMUX select PINCONF config PINCTRL_EXYNOS4 bool "Pinctrl driver data for Exynos4 SoC" + depends on OF && GPIOLIB select PINCTRL_SAMSUNG config PINCTRL_MVEBU -- cgit v1.2.3 From 4a8dece21eea0ad6aca442272673d48693cd93b4 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Mon, 5 Nov 2012 13:51:51 +0200 Subject: drm/i915/crt: fix DPMS standby and suspend mode handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit PCH platforms and VLV should map DPMS standby and suspend modes to off, but due to a buggy reversed comparison this is done on pre-PCH platforms instead. Reported-by: Loïc Yhuel Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56754 Signed-off-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_crt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index b726b478a4f5..6345878ae1e7 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -143,7 +143,7 @@ static void intel_crt_dpms(struct drm_connector *connector, int mode) int old_dpms; /* PCH platforms and VLV only support on/off. */ - if (INTEL_INFO(dev)->gen < 5 && mode != DRM_MODE_DPMS_ON) + if (INTEL_INFO(dev)->gen >= 5 && mode != DRM_MODE_DPMS_ON) mode = DRM_MODE_DPMS_OFF; if (mode == connector->dpms) -- cgit v1.2.3 From 36e42a323cf0de26bd819448b024d3851fc0d865 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 1 Nov 2012 22:02:50 -0600 Subject: irqchip: irq-bcm2835: Add terminating entry for of_device_id table The of_device_id table is supposed to be zero-terminated. Signed-off-by: Axel Lin Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson --- drivers/irqchip/irq-bcm2835.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c index dc670ccc6978..16c78f1c5ef2 100644 --- a/drivers/irqchip/irq-bcm2835.c +++ b/drivers/irqchip/irq-bcm2835.c @@ -168,7 +168,8 @@ static int __init armctrl_of_init(struct device_node *node, } static struct of_device_id irq_of_match[] __initconst = { - { .compatible = "brcm,bcm2835-armctrl-ic", .data = armctrl_of_init } + { .compatible = "brcm,bcm2835-armctrl-ic", .data = armctrl_of_init }, + { } }; void __init bcm2835_init_irq(void) -- cgit v1.2.3 From 619506d5dabb49b7f223a4f2f6b8d697574dd799 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Mon, 2 Apr 2012 18:22:45 +0200 Subject: s390: Move css limits from drivers/s390/cio/ to include/asm/. There's no need to keep __MAX_SUBCHANNEL and __MAX_SSID private to the common I/O layer when __MAX_CSSID is usable by everybody. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/css.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/cio/css.h b/drivers/s390/cio/css.h index 33bb4d891e16..4af3dfe70ef5 100644 --- a/drivers/s390/cio/css.h +++ b/drivers/s390/cio/css.h @@ -112,9 +112,6 @@ extern int for_each_subchannel(int(*fn)(struct subchannel_id, void *), void *); extern void css_reiterate_subchannels(void); void css_update_ssd_info(struct subchannel *sch); -#define __MAX_SUBCHANNEL 65535 -#define __MAX_SSID 3 - struct channel_subsystem { u8 cssid; int valid; -- cgit v1.2.3 From 7f0bc6c0d45497a0191e99426785954bcbda3c6c Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Tue, 6 Nov 2012 15:10:05 +0100 Subject: s390/cio: fix length calculation in idset.c bitmap_or uses the number of bits as its length parameter and not the number of words necessary to store those bits. This fixes a regression introduced by: aa92b33 s390/cio: use generic bitmap functions Reported-by: Christian Ehrhardt Acked-by: Peter Oberparleiter Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/idset.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/cio/idset.c b/drivers/s390/cio/idset.c index 199bc6791177..65d13e38803f 100644 --- a/drivers/s390/cio/idset.c +++ b/drivers/s390/cio/idset.c @@ -125,8 +125,7 @@ int idset_is_empty(struct idset *set) void idset_add_set(struct idset *to, struct idset *from) { - int len = min(__BITOPS_WORDS(to->num_ssid * to->num_id), - __BITOPS_WORDS(from->num_ssid * from->num_id)); + int len = min(to->num_ssid * to->num_id, from->num_ssid * from->num_id); bitmap_or(to->bitmap, to->bitmap, from->bitmap, len); } -- cgit v1.2.3 From afe760e43d576aa8d3af4d9fd3913e52014a7571 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 6 Nov 2012 15:33:33 -0800 Subject: sparc: Allow OF_GPIO on sparc. Signed-off-by: David S. Miller --- drivers/gpio/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index d055cee36942..f11d8e3b4041 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -47,7 +47,7 @@ if GPIOLIB config OF_GPIO def_bool y - depends on OF && !SPARC + depends on OF config DEBUG_GPIO bool "Debug GPIO calls" -- cgit v1.2.3 From 0f1cb1bd94a9c967cd4ad3de51cfdabe61eb5dcc Mon Sep 17 00:00:00 2001 From: Ilija Hadzic Date: Mon, 29 Oct 2012 17:35:00 +0000 Subject: drm: restore open_count if drm_setup fails If drm_setup (called at first open) fails, the whole open call has failed, so we should not keep the open_count incremented. Signed-off-by: Ilija Hadzic Cc: stable@vger.kernel.org Reviewed-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_fops.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c index 7ef1b673e1be..af68eca44abe 100644 --- a/drivers/gpu/drm/drm_fops.c +++ b/drivers/gpu/drm/drm_fops.c @@ -135,8 +135,11 @@ int drm_open(struct inode *inode, struct file *filp) retcode = drm_open_helper(inode, filp, dev); if (!retcode) { atomic_inc(&dev->counts[_DRM_STAT_OPENS]); - if (!dev->open_count++) + if (!dev->open_count++) { retcode = drm_setup(dev); + if (retcode) + dev->open_count--; + } } if (!retcode) { mutex_lock(&dev->struct_mutex); -- cgit v1.2.3 From fdb40a08ef7bc970899c3a1f471165f9c22763a1 Mon Sep 17 00:00:00 2001 From: Ilija Hadzic Date: Mon, 29 Oct 2012 17:35:01 +0000 Subject: drm: set dev_mapping before calling drm_open_helper Some drivers (specifically vmwgfx) look at dev_mapping in their open hook, so we have to set dev->dev_mapping earlier in the process. Reference: http://lists.freedesktop.org/archives/dri-devel/2012-October/029420.html Signed-off-by: Ilija Hadzic Reported-by: Thomas Hellstrom Cc: stable@vger.kernel.org Reviewed-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_fops.c | 47 +++++++++++++++++++++++++++++----------------- 1 file changed, 30 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c index af68eca44abe..133b4132983e 100644 --- a/drivers/gpu/drm/drm_fops.c +++ b/drivers/gpu/drm/drm_fops.c @@ -121,6 +121,8 @@ int drm_open(struct inode *inode, struct file *filp) int minor_id = iminor(inode); struct drm_minor *minor; int retcode = 0; + int need_setup = 0; + struct address_space *old_mapping; minor = idr_find(&drm_minors_idr, minor_id); if (!minor) @@ -132,26 +134,37 @@ int drm_open(struct inode *inode, struct file *filp) if (drm_device_is_unplugged(dev)) return -ENODEV; + if (!dev->open_count++) + need_setup = 1; + mutex_lock(&dev->struct_mutex); + old_mapping = dev->dev_mapping; + if (old_mapping == NULL) + dev->dev_mapping = &inode->i_data; + /* ihold ensures nobody can remove inode with our i_data */ + ihold(container_of(dev->dev_mapping, struct inode, i_data)); + inode->i_mapping = dev->dev_mapping; + filp->f_mapping = dev->dev_mapping; + mutex_unlock(&dev->struct_mutex); + retcode = drm_open_helper(inode, filp, dev); - if (!retcode) { - atomic_inc(&dev->counts[_DRM_STAT_OPENS]); - if (!dev->open_count++) { - retcode = drm_setup(dev); - if (retcode) - dev->open_count--; - } - } - if (!retcode) { - mutex_lock(&dev->struct_mutex); - if (dev->dev_mapping == NULL) - dev->dev_mapping = &inode->i_data; - /* ihold ensures nobody can remove inode with our i_data */ - ihold(container_of(dev->dev_mapping, struct inode, i_data)); - inode->i_mapping = dev->dev_mapping; - filp->f_mapping = dev->dev_mapping; - mutex_unlock(&dev->struct_mutex); + if (retcode) + goto err_undo; + atomic_inc(&dev->counts[_DRM_STAT_OPENS]); + if (need_setup) { + retcode = drm_setup(dev); + if (retcode) + goto err_undo; } + return 0; +err_undo: + mutex_lock(&dev->struct_mutex); + filp->f_mapping = old_mapping; + inode->i_mapping = old_mapping; + iput(container_of(dev->dev_mapping, struct inode, i_data)); + dev->dev_mapping = old_mapping; + mutex_unlock(&dev->struct_mutex); + dev->open_count--; return retcode; } EXPORT_SYMBOL(drm_open); -- cgit v1.2.3 From 695ddeb457584a602f2ba117d08ce37cf6ec1589 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 5 Nov 2012 16:34:58 +0000 Subject: drm/radeon: fix typo in evergreen_mc_resume() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add missing index that may have led us to enabling more crtcs than necessary. May also fix: https://bugs.freedesktop.org/show_bug.cgi?id=56139 Signed-off-by: Alex Deucher Reviewed-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/evergreen.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 14313ad43b76..af31f829f4a8 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -1372,7 +1372,7 @@ void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *s WREG32(BIF_FB_EN, FB_READ_EN | FB_WRITE_EN); for (i = 0; i < rdev->num_crtc; i++) { - if (save->crtc_enabled) { + if (save->crtc_enabled[i]) { if (ASIC_IS_DCE6(rdev)) { tmp = RREG32(EVERGREEN_CRTC_BLANK_CONTROL + crtc_offsets[i]); tmp |= EVERGREEN_CRTC_BLANK_DATA_EN; -- cgit v1.2.3 From 31df3bb78be614fb9125abe56972dfee79bd3e18 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 31 Oct 2012 22:07:39 +0100 Subject: iwlwifi: use ieee80211_free_txskb To let mac80211 clean up any TX information when a frame is dropped, use ieee80211_free_txskb(). Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/mac80211.c | 2 +- drivers/net/wireless/iwlwifi/dvm/main.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index ff8162d4c454..fa4d1b8cd9f6 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -521,7 +521,7 @@ static void iwlagn_mac_tx(struct ieee80211_hw *hw, ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); if (iwlagn_tx_skb(priv, control->sta, skb)) - dev_kfree_skb_any(skb); + ieee80211_free_txskb(hw, skb); } static void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw, diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c index 7ff3f1430678..408132cf83c1 100644 --- a/drivers/net/wireless/iwlwifi/dvm/main.c +++ b/drivers/net/wireless/iwlwifi/dvm/main.c @@ -2114,7 +2114,7 @@ static void iwl_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb) info = IEEE80211_SKB_CB(skb); iwl_trans_free_tx_cmd(priv->trans, info->driver_data[1]); - dev_kfree_skb_any(skb); + ieee80211_free_txskb(priv->hw, skb); } static void iwl_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state) -- cgit v1.2.3 From 1e4db5f2b48401e7ac68e1b9b5323938223a6d15 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 5 Nov 2012 10:16:12 -0500 Subject: drm/radeon/dce3: switch back to old pll allocation order for discrete The order shouldn't matter, but this seems to cause regressions for certain specific cases. This should fix it for now. We probably need to investigate a proper fix in the next development cycle. Signed-off-by: Alex Deucher Cc: Andy Furniss --- drivers/gpu/drm/radeon/atombios_crtc.c | 54 +++++++++++++++++++--------------- 1 file changed, 31 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 2e566e123e9e..3bce0299f64a 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1696,35 +1696,43 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc) return ATOM_PPLL2; DRM_ERROR("unable to allocate a PPLL\n"); return ATOM_PPLL_INVALID; - } else { - if (ASIC_IS_AVIVO(rdev)) { - /* in DP mode, the DP ref clock can come from either PPLL - * depending on the asic: - * DCE3: PPLL1 or PPLL2 - */ - if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(radeon_crtc->encoder))) { - /* use the same PPLL for all DP monitors */ - pll = radeon_get_shared_dp_ppll(crtc); - if (pll != ATOM_PPLL_INVALID) - return pll; - } else { - /* use the same PPLL for all monitors with the same clock */ - pll = radeon_get_shared_nondp_ppll(crtc); - if (pll != ATOM_PPLL_INVALID) - return pll; - } - /* all other cases */ - pll_in_use = radeon_get_pll_use_mask(crtc); + } else if (ASIC_IS_AVIVO(rdev)) { + /* in DP mode, the DP ref clock can come from either PPLL + * depending on the asic: + * DCE3: PPLL1 or PPLL2 + */ + if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(radeon_crtc->encoder))) { + /* use the same PPLL for all DP monitors */ + pll = radeon_get_shared_dp_ppll(crtc); + if (pll != ATOM_PPLL_INVALID) + return pll; + } else { + /* use the same PPLL for all monitors with the same clock */ + pll = radeon_get_shared_nondp_ppll(crtc); + if (pll != ATOM_PPLL_INVALID) + return pll; + } + /* all other cases */ + pll_in_use = radeon_get_pll_use_mask(crtc); + /* the order shouldn't matter here, but we probably + * need this until we have atomic modeset + */ + if (rdev->flags & RADEON_IS_IGP) { if (!(pll_in_use & (1 << ATOM_PPLL1))) return ATOM_PPLL1; if (!(pll_in_use & (1 << ATOM_PPLL2))) return ATOM_PPLL2; - DRM_ERROR("unable to allocate a PPLL\n"); - return ATOM_PPLL_INVALID; } else { - /* on pre-R5xx asics, the crtc to pll mapping is hardcoded */ - return radeon_crtc->crtc_id; + if (!(pll_in_use & (1 << ATOM_PPLL2))) + return ATOM_PPLL2; + if (!(pll_in_use & (1 << ATOM_PPLL1))) + return ATOM_PPLL1; } + DRM_ERROR("unable to allocate a PPLL\n"); + return ATOM_PPLL_INVALID; + } else { + /* on pre-R5xx asics, the crtc to pll mapping is hardcoded */ + return radeon_crtc->crtc_id; } } -- cgit v1.2.3 From 772aebcefeff310f80e32b874988af0076cb799d Mon Sep 17 00:00:00 2001 From: Mojiong Qiu Date: Tue, 6 Nov 2012 16:08:15 +0800 Subject: xen/events: fix RCU warning, or Call idle notifier after irq_enter() exit_idle() should be called after irq_enter(), otherwise it throws: [ INFO: suspicious RCU usage. ] 3.6.5 #1 Not tainted ------------------------------- include/linux/rcupdate.h:725 rcu_read_lock() used illegally while idle! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 1 RCU used illegally from extended quiescent state! 1 lock held by swapper/0/0: #0: (rcu_read_lock){......}, at: [] __atomic_notifier_call_chain+0x0/0x140 stack backtrace: Pid: 0, comm: swapper/0 Not tainted 3.6.5 #1 Call Trace: [] lockdep_rcu_suspicious+0xe2/0x130 [] __atomic_notifier_call_chain+0x12c/0x140 [] ? atomic_notifier_chain_unregister+0x90/0x90 [] ? trace_hardirqs_off+0xd/0x10 [] atomic_notifier_call_chain+0x16/0x20 [] exit_idle+0x43/0x50 [] xen_evtchn_do_upcall+0x25/0x50 [] xen_do_hypervisor_callback+0x1e/0x30 [] ? hypercall_page+0x3aa/0x1000 [] ? hypercall_page+0x3aa/0x1000 [] ? xen_safe_halt+0x10/0x20 [] ? default_idle+0xba/0x570 [] ? cpu_idle+0xdf/0x140 [] ? rest_init+0x135/0x144 [] ? csum_partial_copy_generic+0x16c/0x16c [] ? start_kernel+0x3db/0x3e8 [] ? repair_env_string+0x5a/0x5a [] ? x86_64_start_reservations+0x131/0x135 [] ? xen_start_kernel+0x465/0x46 Git commit 98ad1cc14a5c4fd658f9d72c6ba5c86dfd3ce0d5 Author: Frederic Weisbecker Date: Fri Oct 7 18:22:09 2011 +0200 x86: Call idle notifier after irq_enter() did this, but it missed the Xen code. Signed-off-by: Mojiong Qiu Cc: stable@vger.kernel.org # from 3.3 and newer. Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/events.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 912ac81b6dbf..0be4df39e953 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -1395,10 +1395,10 @@ void xen_evtchn_do_upcall(struct pt_regs *regs) { struct pt_regs *old_regs = set_irq_regs(regs); + irq_enter(); #ifdef CONFIG_X86 exit_idle(); #endif - irq_enter(); __xen_evtchn_do_upcall(); -- cgit v1.2.3 From 6bf926ddd44ddc67edbeb28d4069f207f2c6e07e Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Tue, 6 Nov 2012 15:49:27 -0500 Subject: xen/generic: Disable fallback build on ARM. As there is no need for it (the fallback code is for older hypervisors and they only run under x86), and also b/c we get: drivers/xen/fallback.c: In function 'xen_event_channel_op_compat': drivers/xen/fallback.c:10:19: error: storage size of 'op' isn't known drivers/xen/fallback.c:15:2: error: implicit declaration of function '_hypercall1' [-Werror=implicit-function-declaration] drivers/xen/fallback.c:15:19: error: expected expression before 'int' drivers/xen/fallback.c:18:7: error: 'EVTCHNOP_close' undeclared (first use in this function) drivers/xen/fallback.c:18:7: note: each undeclared identifier is reported only once for each function it appears in .. and more [v1: Moved the enablement to be covered by CONFIG_X86 per Ian's suggestion] Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile index 46de6cdfccb3..74354708c6c4 100644 --- a/drivers/xen/Makefile +++ b/drivers/xen/Makefile @@ -2,7 +2,8 @@ ifneq ($(CONFIG_ARM),y) obj-y += manage.o balloon.o obj-$(CONFIG_HOTPLUG_CPU) += cpu_hotplug.o endif -obj-y += grant-table.o features.o events.o fallback.o +obj-$(CONFIG_X86) += fallback.o +obj-y += grant-table.o features.o events.o obj-y += xenbus/ nostackp := $(call cc-option, -fno-stack-protector) -- cgit v1.2.3 From 0133370f93eae5ed3c0f16d9da2b7add7dda6076 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Fri, 2 Nov 2012 13:44:46 +0530 Subject: drivers: bus: ocp2scp: add pdata support ocp2scp was not having pdata support which makes *musb* fail for non-dt boot in OMAP platform. The pdata will have information about the devices that is connected to ocp2scp. ocp2scp driver will now make use of this information to create the devices that is attached to ocp2scp. This is needed to fix MUSB regression caused by commit c9e4412a (arm: omap: phy: remove unused functions from omap-phy-internal.c) Signed-off-by: Kishon Vijay Abraham I Acked-by: Felipe Balbi [tony@atomide.com: updated comments for regression info] Signed-off-by: Tony Lindgren --- drivers/bus/omap-ocp2scp.c | 68 ++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 65 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/bus/omap-ocp2scp.c b/drivers/bus/omap-ocp2scp.c index ff63560b8467..0c48b0e05ed6 100644 --- a/drivers/bus/omap-ocp2scp.c +++ b/drivers/bus/omap-ocp2scp.c @@ -22,6 +22,26 @@ #include #include #include +#include + +/** + * _count_resources - count for the number of resources + * @res: struct resource * + * + * Count and return the number of resources populated for the device that is + * connected to ocp2scp. + */ +static unsigned _count_resources(struct resource *res) +{ + int cnt = 0; + + while (res->start != res->end) { + cnt++; + res++; + } + + return cnt; +} static int ocp2scp_remove_devices(struct device *dev, void *c) { @@ -34,20 +54,62 @@ static int ocp2scp_remove_devices(struct device *dev, void *c) static int __devinit omap_ocp2scp_probe(struct platform_device *pdev) { - int ret; - struct device_node *np = pdev->dev.of_node; + int ret; + unsigned res_cnt, i; + struct device_node *np = pdev->dev.of_node; + struct platform_device *pdev_child; + struct omap_ocp2scp_platform_data *pdata = pdev->dev.platform_data; + struct omap_ocp2scp_dev *dev; if (np) { ret = of_platform_populate(np, NULL, NULL, &pdev->dev); if (ret) { - dev_err(&pdev->dev, "failed to add resources for ocp2scp child\n"); + dev_err(&pdev->dev, + "failed to add resources for ocp2scp child\n"); goto err0; } + } else if (pdata) { + for (i = 0, dev = *pdata->devices; i < pdata->dev_cnt; i++, + dev++) { + res_cnt = _count_resources(dev->res); + + pdev_child = platform_device_alloc(dev->drv_name, + PLATFORM_DEVID_AUTO); + if (!pdev_child) { + dev_err(&pdev->dev, + "failed to allocate mem for ocp2scp child\n"); + goto err0; + } + + ret = platform_device_add_resources(pdev_child, + dev->res, res_cnt); + if (ret) { + dev_err(&pdev->dev, + "failed to add resources for ocp2scp child\n"); + goto err1; + } + + pdev_child->dev.parent = &pdev->dev; + + ret = platform_device_add(pdev_child); + if (ret) { + dev_err(&pdev->dev, + "failed to register ocp2scp child device\n"); + goto err1; + } + } + } else { + dev_err(&pdev->dev, "OCP2SCP initialized without plat data\n"); + return -EINVAL; } + pm_runtime_enable(&pdev->dev); return 0; +err1: + platform_device_put(pdev_child); + err0: device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices); -- cgit v1.2.3 From 00956ea360c3825ac9fd337758e07e193f66d1d9 Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Fri, 28 Sep 2012 19:13:11 +0900 Subject: mmc: dw_mmc: remove _dev_info compile warning This patch removes the following warning. drivers/mmc/host/dw_mmc.c:1976: warning: passing argument 1 of '_dev_info' from incompatible pointer type Signed-off-by: Seungwon Jeon Acked-by: Will Newton Signed-off-by: Chris Ball --- drivers/mmc/host/dw_mmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index c2828f35c3b8..250aa1836591 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1968,7 +1968,7 @@ static void dw_mci_init_dma(struct dw_mci *host) /* Determine which DMA interface to use */ #ifdef CONFIG_MMC_DW_IDMAC host->dma_ops = &dw_mci_idmac_ops; - dev_info(&host->dev, "Using internal DMA controller.\n"); + dev_info(host->dev, "Using internal DMA controller.\n"); #endif if (!host->dma_ops) -- cgit v1.2.3 From 63ef5d8c28b2a944f104d854254941e7375c85a3 Mon Sep 17 00:00:00 2001 From: Jerry Huang Date: Thu, 25 Oct 2012 13:47:19 +0800 Subject: mmc: sdhci-of-esdhc: disable CMD23 for some Freescale SoCs CMD23 causes lots of errors in kernel on some freescale SoCs (P1020, P1021, P1022, P1024, P1025 and P4080) when MMC card used, which is because these controllers does not support CMD23, even on the SoCs which declares CMD23 is supported. Therefore, we'll not use CMD23. Signed-off-by: Jerry Huang Signed-off-by: Shaohui Xie Acked-by: Anton Vorontsov Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-of-esdhc.c | 11 +++++++++++ drivers/mmc/host/sdhci-pltfm.c | 7 +++++++ drivers/mmc/host/sdhci.c | 3 +++ drivers/mmc/host/sdhci.h | 1 + 4 files changed, 22 insertions(+) (limited to 'drivers') diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index ae5fcbfa1eef..63d219f57cae 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -169,6 +169,16 @@ static void esdhc_of_resume(struct sdhci_host *host) } #endif +static void esdhc_of_platform_init(struct sdhci_host *host) +{ + u32 vvn; + + vvn = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS); + vvn = (vvn & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT; + if (vvn == VENDOR_V_22) + host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23; +} + static struct sdhci_ops sdhci_esdhc_ops = { .read_l = esdhc_readl, .read_w = esdhc_readw, @@ -180,6 +190,7 @@ static struct sdhci_ops sdhci_esdhc_ops = { .enable_dma = esdhc_of_enable_dma, .get_max_clock = esdhc_of_get_max_clock, .get_min_clock = esdhc_of_get_min_clock, + .platform_init = esdhc_of_platform_init, #ifdef CONFIG_PM .platform_suspend = esdhc_of_suspend, .platform_resume = esdhc_of_resume, diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c index 65551a9709cc..27164457f861 100644 --- a/drivers/mmc/host/sdhci-pltfm.c +++ b/drivers/mmc/host/sdhci-pltfm.c @@ -150,6 +150,13 @@ struct sdhci_host *sdhci_pltfm_init(struct platform_device *pdev, goto err_remap; } + /* + * Some platforms need to probe the controller to be able to + * determine which caps should be used. + */ + if (host->ops && host->ops->platform_init) + host->ops->platform_init(host); + platform_set_drvdata(pdev, host); return host; diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 7922adb42386..f05a37747b3d 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2837,6 +2837,9 @@ int sdhci_add_host(struct sdhci_host *host) if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA)) mmc->caps |= MMC_CAP_4_BIT_DATA; + if (host->quirks2 & SDHCI_QUIRK2_HOST_NO_CMD23) + mmc->caps &= ~MMC_CAP_CMD23; + if (caps[0] & SDHCI_CAN_DO_HISPD) mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 97653ea8942b..71a4a7ed46c5 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -278,6 +278,7 @@ struct sdhci_ops { void (*hw_reset)(struct sdhci_host *host); void (*platform_suspend)(struct sdhci_host *host); void (*platform_resume)(struct sdhci_host *host); + void (*platform_init)(struct sdhci_host *host); }; #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS -- cgit v1.2.3 From 2da1d7f2948900cd50d38643db39f790edb3cc96 Mon Sep 17 00:00:00 2001 From: Yuvaraj CD Date: Mon, 8 Oct 2012 14:29:51 +0530 Subject: mmc: dw_mmc: enable controller interrupt before calling mmc_start_host As mmc_start_host is getting called before enabling the dw_mmc controller interrupt, there is a problem of missing the SDMMC_INT_CMD_DONE for the very first command sent by the sdio_reset. This problem occurs only when we disable MMC debugging i.e, MMC_DEBUG=n. This patch enables the dw_mmc controller interrupt before mmc_start_host. Signed-off-by: Yuvaraj CD Reviewed-by: Girish K S Acked-by: Will Newton Signed-off-by: Chris Ball --- drivers/mmc/host/dw_mmc.c | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 250aa1836591..4b2bedc887ba 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -2228,6 +2228,21 @@ int dw_mci_probe(struct dw_mci *host) else host->num_slots = ((mci_readl(host, HCON) >> 1) & 0x1F) + 1; + /* + * Enable interrupts for command done, data over, data empty, card det, + * receive ready and error such as transmit, receive timeout, crc error + */ + mci_writel(host, RINTSTS, 0xFFFFFFFF); + mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER | + SDMMC_INT_TXDR | SDMMC_INT_RXDR | + DW_MCI_ERROR_FLAGS | SDMMC_INT_CD); + mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */ + + dev_info(host->dev, "DW MMC controller at irq %d, " + "%d bit host data width, " + "%u deep fifo\n", + host->irq, width, fifo_size); + /* We need at least one slot to succeed */ for (i = 0; i < host->num_slots; i++) { ret = dw_mci_init_slot(host, i); @@ -2257,20 +2272,6 @@ int dw_mci_probe(struct dw_mci *host) else host->data_offset = DATA_240A_OFFSET; - /* - * Enable interrupts for command done, data over, data empty, card det, - * receive ready and error such as transmit, receive timeout, crc error - */ - mci_writel(host, RINTSTS, 0xFFFFFFFF); - mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER | - SDMMC_INT_TXDR | SDMMC_INT_RXDR | - DW_MCI_ERROR_FLAGS | SDMMC_INT_CD); - mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */ - - dev_info(host->dev, "DW MMC controller at irq %d, " - "%d bit host data width, " - "%u deep fifo\n", - host->irq, width, fifo_size); if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO) dev_info(host->dev, "Internal DMAC interrupt fix enabled.\n"); -- cgit v1.2.3 From cb27a843de9e3a0a2e4b7e631da4679d38f49cee Mon Sep 17 00:00:00 2001 From: James Hogan Date: Tue, 16 Oct 2012 09:43:08 +0100 Subject: mmc: dw_mmc: fix multiple drv_data NULL dereferences 800d78bfccb3d ("mmc: dw_mmc: add support for implementation specific callbacks") -- merged in v3.7-rc1 -- introduced multiple NULL pointer dereferences when the default dw_mci_pltfm_probe() is used, as it sets host->drv_data to NULL, and that's only checked against NULL in 1 out of the 7 cases where it is dereferenced. Signed-off-by: James Hogan Acked-by: Jaehoon Chung Acked-by: Will Newton Signed-off-by: Chris Ball --- drivers/mmc/host/dw_mmc-pltfm.c | 4 ++-- drivers/mmc/host/dw_mmc.c | 29 +++++++++++++++++------------ 2 files changed, 19 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c index c960ca7ffbe6..e5957211b171 100644 --- a/drivers/mmc/host/dw_mmc-pltfm.c +++ b/drivers/mmc/host/dw_mmc-pltfm.c @@ -50,8 +50,8 @@ int dw_mci_pltfm_register(struct platform_device *pdev, if (!host->regs) return -ENOMEM; - if (host->drv_data->init) { - ret = host->drv_data->init(host); + if (drv_data && drv_data->init) { + ret = drv_data->init(host); if (ret) return ret; } diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 4b2bedc887ba..b087f66e30c4 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -232,6 +232,7 @@ static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd) { struct mmc_data *data; struct dw_mci_slot *slot = mmc_priv(mmc); + struct dw_mci_drv_data *drv_data = slot->host->drv_data; u32 cmdr; cmd->error = -EINPROGRESS; @@ -261,8 +262,8 @@ static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd) cmdr |= SDMMC_CMD_DAT_WR; } - if (slot->host->drv_data->prepare_command) - slot->host->drv_data->prepare_command(slot->host, &cmdr); + if (drv_data && drv_data->prepare_command) + drv_data->prepare_command(slot->host, &cmdr); return cmdr; } @@ -772,6 +773,7 @@ static void dw_mci_request(struct mmc_host *mmc, struct mmc_request *mrq) static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct dw_mci_slot *slot = mmc_priv(mmc); + struct dw_mci_drv_data *drv_data = slot->host->drv_data; u32 regs; /* set default 1 bit mode */ @@ -807,8 +809,8 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) slot->clock = ios->clock; } - if (slot->host->drv_data->set_ios) - slot->host->drv_data->set_ios(slot->host, ios); + if (drv_data && drv_data->set_ios) + drv_data->set_ios(slot->host, ios); switch (ios->power_mode) { case MMC_POWER_UP: @@ -1815,6 +1817,7 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) { struct mmc_host *mmc; struct dw_mci_slot *slot; + struct dw_mci_drv_data *drv_data = host->drv_data; int ctrl_id, ret; u8 bus_width; @@ -1854,8 +1857,8 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) } else { ctrl_id = to_platform_device(host->dev)->id; } - if (host->drv_data && host->drv_data->caps) - mmc->caps |= host->drv_data->caps[ctrl_id]; + if (drv_data && drv_data->caps) + mmc->caps |= drv_data->caps[ctrl_id]; if (host->pdata->caps2) mmc->caps2 = host->pdata->caps2; @@ -1867,10 +1870,10 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) else bus_width = 1; - if (host->drv_data->setup_bus) { + if (drv_data && drv_data->setup_bus) { struct device_node *slot_np; slot_np = dw_mci_of_find_slot_node(host->dev, slot->id); - ret = host->drv_data->setup_bus(host, slot_np, bus_width); + ret = drv_data->setup_bus(host, slot_np, bus_width); if (ret) goto err_setup_bus; } @@ -2035,6 +2038,7 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) struct dw_mci_board *pdata; struct device *dev = host->dev; struct device_node *np = dev->of_node; + struct dw_mci_drv_data *drv_data = host->drv_data; int idx, ret; pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); @@ -2062,8 +2066,8 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms); - if (host->drv_data->parse_dt) { - ret = host->drv_data->parse_dt(host); + if (drv_data && drv_data->parse_dt) { + ret = drv_data->parse_dt(host); if (ret) return ERR_PTR(ret); } @@ -2080,6 +2084,7 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) int dw_mci_probe(struct dw_mci *host) { + struct dw_mci_drv_data *drv_data = host->drv_data; int width, i, ret = 0; u32 fifo_size; int init_slots = 0; @@ -2127,8 +2132,8 @@ int dw_mci_probe(struct dw_mci *host) else host->bus_hz = clk_get_rate(host->ciu_clk); - if (host->drv_data->setup_clock) { - ret = host->drv_data->setup_clock(host); + if (drv_data && drv_data->setup_clock) { + ret = drv_data->setup_clock(host); if (ret) { dev_err(host->dev, "implementation specific clock setup failed\n"); -- cgit v1.2.3 From 9d1f02864408c20dbbfaa661231c7afb5a8fc028 Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Mon, 15 Oct 2012 21:35:07 +0530 Subject: mmc: omap_hsmmc: fix host reference after mmc_free_host struct omap_hsmmc_host *host should not be accessed after mmc_free_host(). Reorder mmc_free_host() after iounmap(host->base). Signed-off-by: Balaji T K Signed-off-by: Venkatraman S Signed-off-by: Chris Ball --- drivers/mmc/host/omap_hsmmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 54bfd0cc106b..d5057415d7d9 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -2009,8 +2009,8 @@ static int __devexit omap_hsmmc_remove(struct platform_device *pdev) clk_put(host->dbclk); } - mmc_free_host(host->mmc); iounmap(host->base); + mmc_free_host(host->mmc); omap_hsmmc_gpio_free(pdev->dev.platform_data); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- cgit v1.2.3 From 9ea28ecbeb090159a3383ff60b29dee00c489774 Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Mon, 15 Oct 2012 21:35:08 +0530 Subject: mmc: omap_hsmmc: fix NULL pointer dereference for dt boot dev->platform_data is NULL in case of device tree boot, instead use the saved version in struct omap_hsmmc_host. Signed-off-by: Balaji T K Signed-off-by: Venkatraman S Signed-off-by: Chris Ball --- drivers/mmc/host/omap_hsmmc.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index d5057415d7d9..fedd258cc4ea 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -178,7 +178,8 @@ struct omap_hsmmc_host { static int omap_hsmmc_card_detect(struct device *dev, int slot) { - struct omap_mmc_platform_data *mmc = dev->platform_data; + struct omap_hsmmc_host *host = dev_get_drvdata(dev); + struct omap_mmc_platform_data *mmc = host->pdata; /* NOTE: assumes card detect signal is active-low */ return !gpio_get_value_cansleep(mmc->slots[0].switch_pin); @@ -186,7 +187,8 @@ static int omap_hsmmc_card_detect(struct device *dev, int slot) static int omap_hsmmc_get_wp(struct device *dev, int slot) { - struct omap_mmc_platform_data *mmc = dev->platform_data; + struct omap_hsmmc_host *host = dev_get_drvdata(dev); + struct omap_mmc_platform_data *mmc = host->pdata; /* NOTE: assumes write protect signal is active-high */ return gpio_get_value_cansleep(mmc->slots[0].gpio_wp); @@ -194,7 +196,8 @@ static int omap_hsmmc_get_wp(struct device *dev, int slot) static int omap_hsmmc_get_cover_state(struct device *dev, int slot) { - struct omap_mmc_platform_data *mmc = dev->platform_data; + struct omap_hsmmc_host *host = dev_get_drvdata(dev); + struct omap_mmc_platform_data *mmc = host->pdata; /* NOTE: assumes card detect signal is active-low */ return !gpio_get_value_cansleep(mmc->slots[0].switch_pin); @@ -204,7 +207,8 @@ static int omap_hsmmc_get_cover_state(struct device *dev, int slot) static int omap_hsmmc_suspend_cdirq(struct device *dev, int slot) { - struct omap_mmc_platform_data *mmc = dev->platform_data; + struct omap_hsmmc_host *host = dev_get_drvdata(dev); + struct omap_mmc_platform_data *mmc = host->pdata; disable_irq(mmc->slots[0].card_detect_irq); return 0; @@ -212,7 +216,8 @@ static int omap_hsmmc_suspend_cdirq(struct device *dev, int slot) static int omap_hsmmc_resume_cdirq(struct device *dev, int slot) { - struct omap_mmc_platform_data *mmc = dev->platform_data; + struct omap_hsmmc_host *host = dev_get_drvdata(dev); + struct omap_mmc_platform_data *mmc = host->pdata; enable_irq(mmc->slots[0].card_detect_irq); return 0; @@ -2009,9 +2014,9 @@ static int __devexit omap_hsmmc_remove(struct platform_device *pdev) clk_put(host->dbclk); } + omap_hsmmc_gpio_free(host->pdata); iounmap(host->base); mmc_free_host(host->mmc); - omap_hsmmc_gpio_free(pdev->dev.platform_data); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res) -- cgit v1.2.3 From 6eb30adf962983754f1a05eb79c2a9260fb7f5a6 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 9 Oct 2012 16:26:05 -0300 Subject: mmc: mxcmmc: Fix MODULE_ALIAS The correct name for the driver is "mxc-mmc". Signed-off-by: Fabio Estevam Acked-by: Sascha Hauer Signed-off-by: Chris Ball --- drivers/mmc/host/mxcmmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index 565c2e4fac75..6290b7f1ccfe 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -1134,4 +1134,4 @@ module_platform_driver(mxcmci_driver); MODULE_DESCRIPTION("i.MX Multimedia Card Interface Driver"); MODULE_AUTHOR("Sascha Hauer, Pengutronix"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:imx-mmc"); +MODULE_ALIAS("platform:mxc-mmc"); -- cgit v1.2.3 From 90b3e6c53b006d55952183d8ada2ce3ebc0dce06 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Thu, 18 Oct 2012 09:54:31 +0300 Subject: mmc: sdhci-pci: fix 'Invalid iomem size' error message condition The SDHCI standard defines a 256 byte register set but a device that specifies a larger iomem region is not an error. Alter the message condition accordingly. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 4bb74b042a06..04936f353ced 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -1196,7 +1196,7 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot( return ERR_PTR(-ENODEV); } - if (pci_resource_len(pdev, bar) != 0x100) { + if (pci_resource_len(pdev, bar) < 0x100) { dev_err(&pdev->dev, "Invalid iomem size. You may " "experience problems.\n"); } -- cgit v1.2.3 From a0d28ba01ebd048b4ba418142b37f5cf80e6d156 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 23 Oct 2012 14:08:52 +0200 Subject: mmc: sh_mmcif: fix use after free A recent commit "mmc: sh_mmcif: fix clock management" has introduced a use after free bug in sh_mmcif.c: in sh_mmcif_remove() the call to mmc_free_host() frees private driver data, therefore using it afterwards is a bug. Revert that hunk. Signed-off-by: Guennadi Liakhovetski Cc: stable@vger.kernel.org [3.6] Signed-off-by: Chris Ball --- drivers/mmc/host/sh_mmcif.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index 11d2bc3b51d5..d25bc97dc5c6 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -1466,9 +1466,9 @@ static int __devexit sh_mmcif_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); + clk_disable(host->hclk); mmc_free_host(host->mmc); pm_runtime_put_sync(&pdev->dev); - clk_disable(host->hclk); pm_runtime_disable(&pdev->dev); return 0; -- cgit v1.2.3 From ee3298a2b6832bcfeec040dabf19632b704d826a Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 29 Oct 2012 21:43:07 +0000 Subject: mmc: fix sdhci-dove probe/removal 1. Never ever publish a device in the system before it has been setup to a usable state. 2. Unregister the device _BEFORE_ taking away any resources it may be using. 3. Don't check clks against NULL. Signed-off-by: Russell King Tested-by: Sebastian Hesselbarth Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-dove.c | 38 ++++++++++++++++++++------------------ 1 file changed, 20 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/sdhci-dove.c b/drivers/mmc/host/sdhci-dove.c index 90140eb03e36..8fd50a211037 100644 --- a/drivers/mmc/host/sdhci-dove.c +++ b/drivers/mmc/host/sdhci-dove.c @@ -19,6 +19,7 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include #include #include #include @@ -84,30 +85,32 @@ static int __devinit sdhci_dove_probe(struct platform_device *pdev) struct sdhci_dove_priv *priv; int ret; - ret = sdhci_pltfm_register(pdev, &sdhci_dove_pdata); - if (ret) - goto sdhci_dove_register_fail; - priv = devm_kzalloc(&pdev->dev, sizeof(struct sdhci_dove_priv), GFP_KERNEL); if (!priv) { dev_err(&pdev->dev, "unable to allocate private data"); - ret = -ENOMEM; - goto sdhci_dove_allocate_fail; + return -ENOMEM; } + priv->clk = clk_get(&pdev->dev, NULL); + if (!IS_ERR(priv->clk)) + clk_prepare_enable(priv->clk); + + ret = sdhci_pltfm_register(pdev, &sdhci_dove_pdata); + if (ret) + goto sdhci_dove_register_fail; + host = platform_get_drvdata(pdev); pltfm_host = sdhci_priv(host); pltfm_host->priv = priv; - priv->clk = clk_get(&pdev->dev, NULL); - if (!IS_ERR(priv->clk)) - clk_prepare_enable(priv->clk); return 0; -sdhci_dove_allocate_fail: - sdhci_pltfm_unregister(pdev); sdhci_dove_register_fail: + if (!IS_ERR(priv->clk)) { + clk_disable_unprepare(priv->clk); + clk_put(priv->clk); + } return ret; } @@ -117,14 +120,13 @@ static int __devexit sdhci_dove_remove(struct platform_device *pdev) struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_dove_priv *priv = pltfm_host->priv; - if (priv->clk) { - if (!IS_ERR(priv->clk)) { - clk_disable_unprepare(priv->clk); - clk_put(priv->clk); - } - devm_kfree(&pdev->dev, priv->clk); + sdhci_pltfm_unregister(pdev); + + if (!IS_ERR(priv->clk)) { + clk_disable_unprepare(priv->clk); + clk_put(priv->clk); } - return sdhci_pltfm_unregister(pdev); + return 0; } static const struct of_device_id sdhci_dove_of_match_table[] __devinitdata = { -- cgit v1.2.3 From 657d59823c095e8f03e2744d765f53700331ff8f Mon Sep 17 00:00:00 2001 From: Kevin Liu Date: Wed, 17 Oct 2012 19:04:44 +0800 Subject: mmc: sdhci: fix IS_ERR() checking of regulator_get() There are two problems here: The check for vmmc was printing an unnecessary pr_info() when host->vmmc is NULL. The intent of the check for vqmmc was to only remove UHS if we have a regulator that doesn't support the required voltage, but since IS_ERR() doesn't catch NULL, we were actually removing UHS modes if vqmmc isn't present at all -- since it isn't present for most users, this breaks UHS for them. This patch fixes that UHS regression in 3.7-rc1. Signed-off-by: Kevin Liu Signed-off-by: Bin Wang Reviewed-by: Philip Rakity Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index f05a37747b3d..949e18c7c05d 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2849,9 +2849,12 @@ int sdhci_add_host(struct sdhci_host *host) /* If vqmmc regulator and no 1.8V signalling, then there's no UHS */ host->vqmmc = regulator_get(mmc_dev(mmc), "vqmmc"); - if (IS_ERR(host->vqmmc)) { - pr_info("%s: no vqmmc regulator found\n", mmc_hostname(mmc)); - host->vqmmc = NULL; + if (IS_ERR_OR_NULL(host->vqmmc)) { + if (PTR_ERR(host->vqmmc) < 0) { + pr_info("%s: no vqmmc regulator found\n", + mmc_hostname(mmc)); + host->vqmmc = NULL; + } } else if (regulator_is_supported_voltage(host->vqmmc, 1800000, 1800000)) regulator_enable(host->vqmmc); @@ -2907,9 +2910,12 @@ int sdhci_add_host(struct sdhci_host *host) ocr_avail = 0; host->vmmc = regulator_get(mmc_dev(mmc), "vmmc"); - if (IS_ERR(host->vmmc)) { - pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc)); - host->vmmc = NULL; + if (IS_ERR_OR_NULL(host->vmmc)) { + if (PTR_ERR(host->vmmc) < 0) { + pr_info("%s: no vmmc regulator found\n", + mmc_hostname(mmc)); + host->vmmc = NULL; + } } else regulator_enable(host->vmmc); -- cgit v1.2.3 From 14efd957209461bbdf285bf0d67e931955d04a4c Mon Sep 17 00:00:00 2001 From: Chris Ball Date: Mon, 5 Nov 2012 14:29:49 -0500 Subject: mmc: sdhci: fix NULL dereference in sdhci_request() tuning Commit 473b095a72a9 ("mmc: sdhci: fix incorrect command used in tuning") introduced a NULL dereference at resume-time if an SD 3.0 host controller raises the SDHCI_NEEDS_TUNING flag while no card is inserted. Seen on an OLPC XO-4 with sdhci-pxav3, but presumably affects other controllers too. Signed-off-by: Chris Ball Cc: stable [3.3+] --- drivers/mmc/host/sdhci.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 949e18c7c05d..c7851c0aabce 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1315,16 +1315,19 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) */ if ((host->flags & SDHCI_NEEDS_RETUNING) && !(present_state & (SDHCI_DOING_WRITE | SDHCI_DOING_READ))) { - /* eMMC uses cmd21 while sd and sdio use cmd19 */ - tuning_opcode = mmc->card->type == MMC_TYPE_MMC ? - MMC_SEND_TUNING_BLOCK_HS200 : - MMC_SEND_TUNING_BLOCK; - spin_unlock_irqrestore(&host->lock, flags); - sdhci_execute_tuning(mmc, tuning_opcode); - spin_lock_irqsave(&host->lock, flags); - - /* Restore original mmc_request structure */ - host->mrq = mrq; + if (mmc->card) { + /* eMMC uses cmd21 but sd and sdio use cmd19 */ + tuning_opcode = + mmc->card->type == MMC_TYPE_MMC ? + MMC_SEND_TUNING_BLOCK_HS200 : + MMC_SEND_TUNING_BLOCK; + spin_unlock_irqrestore(&host->lock, flags); + sdhci_execute_tuning(mmc, tuning_opcode); + spin_lock_irqsave(&host->lock, flags); + + /* Restore original mmc_request structure */ + host->mrq = mrq; + } } if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23)) -- cgit v1.2.3 From 517cb9f1bb0afd38bebe9b0af1b524b8a65afdb4 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 6 Nov 2012 22:55:30 +0100 Subject: mmc: dw_mmc: fix modular build for exynos back-end The MODULE_DEVICE_TABLE entry for dw_mci_exynos_match was incorrectly copied from the platform back-end, which causes this error when building the driver as a loadable module: drivers/mmc/host/dw_mmc-exynos.c: At top level: drivers/mmc/host/dw_mmc-exynos.c:226:34: error: '__mod_of_device_table' aliased to undefined symbol 'dw_mci_pltfm_match' This patch fixes the problem by just using the correct string. Signed-off-by: Arnd Bergmann Cc: Thomas Abraham Cc: Will Newton Signed-off-by: Chris Ball --- drivers/mmc/host/dw_mmc-exynos.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c index 660bbc528862..0147ac3aad59 100644 --- a/drivers/mmc/host/dw_mmc-exynos.c +++ b/drivers/mmc/host/dw_mmc-exynos.c @@ -223,7 +223,7 @@ static const struct of_device_id dw_mci_exynos_match[] = { .data = (void *)&exynos5250_drv_data, }, {}, }; -MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match); +MODULE_DEVICE_TABLE(of, dw_mci_exynos_match); int dw_mci_exynos_probe(struct platform_device *pdev) { -- cgit v1.2.3 From 8e2b36ea6e3abc613cbbdb41692fbd2f9ee18996 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 6 Nov 2012 22:55:31 +0100 Subject: mmc: dw_mmc: constify dw_mci_idmac_ops in exynos back-end The of_device_id match data is now marked as const and must not be modified. This changes the dw_mmc to mark all pointers passing the dw_mci_drv_data or dw_mci_dma_ops structures as const, and also marks the static definitions as const. drivers/mmc/host/dw_mmc-exynos.c: In function 'dw_mci_exynos_probe': drivers/mmc/host/dw_mmc-exynos.c:234:11: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] Signed-off-by: Arnd Bergmann Cc: Thomas Abraham Cc: Will Newton Signed-off-by: Chris Ball --- drivers/mmc/host/dw_mmc-exynos.c | 6 +++--- drivers/mmc/host/dw_mmc-pltfm.c | 2 +- drivers/mmc/host/dw_mmc-pltfm.h | 2 +- drivers/mmc/host/dw_mmc.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c index 0147ac3aad59..4d50da618166 100644 --- a/drivers/mmc/host/dw_mmc-exynos.c +++ b/drivers/mmc/host/dw_mmc-exynos.c @@ -208,7 +208,7 @@ static unsigned long exynos5250_dwmmc_caps[4] = { MMC_CAP_CMD23, }; -static struct dw_mci_drv_data exynos5250_drv_data = { +static const struct dw_mci_drv_data exynos5250_drv_data = { .caps = exynos5250_dwmmc_caps, .init = dw_mci_exynos_priv_init, .setup_clock = dw_mci_exynos_setup_clock, @@ -220,14 +220,14 @@ static struct dw_mci_drv_data exynos5250_drv_data = { static const struct of_device_id dw_mci_exynos_match[] = { { .compatible = "samsung,exynos5250-dw-mshc", - .data = (void *)&exynos5250_drv_data, }, + .data = &exynos5250_drv_data, }, {}, }; MODULE_DEVICE_TABLE(of, dw_mci_exynos_match); int dw_mci_exynos_probe(struct platform_device *pdev) { - struct dw_mci_drv_data *drv_data; + const struct dw_mci_drv_data *drv_data; const struct of_device_id *match; match = of_match_node(dw_mci_exynos_match, pdev->dev.of_node); diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c index e5957211b171..917936bee5d5 100644 --- a/drivers/mmc/host/dw_mmc-pltfm.c +++ b/drivers/mmc/host/dw_mmc-pltfm.c @@ -24,7 +24,7 @@ #include "dw_mmc.h" int dw_mci_pltfm_register(struct platform_device *pdev, - struct dw_mci_drv_data *drv_data) + const struct dw_mci_drv_data *drv_data) { struct dw_mci *host; struct resource *regs; diff --git a/drivers/mmc/host/dw_mmc-pltfm.h b/drivers/mmc/host/dw_mmc-pltfm.h index 301f24541fc2..2ac37b81de4d 100644 --- a/drivers/mmc/host/dw_mmc-pltfm.h +++ b/drivers/mmc/host/dw_mmc-pltfm.h @@ -13,7 +13,7 @@ #define _DW_MMC_PLTFM_H_ extern int dw_mci_pltfm_register(struct platform_device *pdev, - struct dw_mci_drv_data *drv_data); + const struct dw_mci_drv_data *drv_data); extern int __devexit dw_mci_pltfm_remove(struct platform_device *pdev); extern const struct dev_pm_ops dw_mci_pltfm_pmops; diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index b087f66e30c4..c0667c8af2bd 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -435,7 +435,7 @@ static int dw_mci_idmac_init(struct dw_mci *host) return 0; } -static struct dw_mci_dma_ops dw_mci_idmac_ops = { +static const struct dw_mci_dma_ops dw_mci_idmac_ops = { .init = dw_mci_idmac_init, .start = dw_mci_idmac_start_dma, .stop = dw_mci_idmac_stop_dma, -- cgit v1.2.3 From 0f310a057feb91ff17a7f4d5f8405e73035084e2 Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Wed, 3 Oct 2012 08:35:43 +0900 Subject: mmc: sdhci-s3c: use clk_prepare_enable and clk_disable_unprepare Convert clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare calls as required by common clock framework. Signed-off-by: Thomas Abraham Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-s3c.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index 2903949594c6..a093e2ecaf80 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -211,8 +211,8 @@ static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock) if (ourhost->cur_clk != best_src) { struct clk *clk = ourhost->clk_bus[best_src]; - clk_enable(clk); - clk_disable(ourhost->clk_bus[ourhost->cur_clk]); + clk_prepare_enable(clk); + clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]); /* turn clock off to card before changing clock source */ writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL); @@ -607,7 +607,7 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) } /* enable the local io clock and keep it running for the moment. */ - clk_enable(sc->clk_io); + clk_prepare_enable(sc->clk_io); for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) { struct clk *clk; @@ -638,7 +638,7 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) } #ifndef CONFIG_PM_RUNTIME - clk_enable(sc->clk_bus[sc->cur_clk]); + clk_prepare_enable(sc->clk_bus[sc->cur_clk]); #endif res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -747,13 +747,13 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) sdhci_s3c_setup_card_detect_gpio(sc); #ifdef CONFIG_PM_RUNTIME - clk_disable(sc->clk_io); + clk_disable_unprepare(sc->clk_io); #endif return 0; err_req_regs: #ifndef CONFIG_PM_RUNTIME - clk_disable(sc->clk_bus[sc->cur_clk]); + clk_disable_unprepare(sc->clk_bus[sc->cur_clk]); #endif for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) { if (sc->clk_bus[ptr]) { @@ -762,7 +762,7 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) } err_no_busclks: - clk_disable(sc->clk_io); + clk_disable_unprepare(sc->clk_io); clk_put(sc->clk_io); err_io_clk: @@ -794,7 +794,7 @@ static int __devexit sdhci_s3c_remove(struct platform_device *pdev) gpio_free(sc->ext_cd_gpio); #ifdef CONFIG_PM_RUNTIME - clk_enable(sc->clk_io); + clk_prepare_enable(sc->clk_io); #endif sdhci_remove_host(host, 1); @@ -802,14 +802,14 @@ static int __devexit sdhci_s3c_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); #ifndef CONFIG_PM_RUNTIME - clk_disable(sc->clk_bus[sc->cur_clk]); + clk_disable_unprepare(sc->clk_bus[sc->cur_clk]); #endif for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) { if (sc->clk_bus[ptr]) { clk_put(sc->clk_bus[ptr]); } } - clk_disable(sc->clk_io); + clk_disable_unprepare(sc->clk_io); clk_put(sc->clk_io); if (pdev->dev.of_node) { @@ -849,8 +849,8 @@ static int sdhci_s3c_runtime_suspend(struct device *dev) ret = sdhci_runtime_suspend_host(host); - clk_disable(ourhost->clk_bus[ourhost->cur_clk]); - clk_disable(busclk); + clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]); + clk_disable_unprepare(busclk); return ret; } @@ -861,8 +861,8 @@ static int sdhci_s3c_runtime_resume(struct device *dev) struct clk *busclk = ourhost->clk_io; int ret; - clk_enable(busclk); - clk_enable(ourhost->clk_bus[ourhost->cur_clk]); + clk_prepare_enable(busclk); + clk_prepare_enable(ourhost->clk_bus[ourhost->cur_clk]); ret = sdhci_runtime_resume_host(host); return ret; } -- cgit v1.2.3 From 0aa55c2367f082876f92660312214cd20c6a024b Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Tue, 30 Oct 2012 14:28:36 +0900 Subject: mmc: sdhci-s3c: fix the card detection in runtime-pm If host clock is disabled, host cannot detect a card in case of using CD internal for detection. Signed-off-by: Seungwon Jeon Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-s3c.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index a093e2ecaf80..a54dd5d7a5f9 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -747,7 +747,8 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) sdhci_s3c_setup_card_detect_gpio(sc); #ifdef CONFIG_PM_RUNTIME - clk_disable_unprepare(sc->clk_io); + if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL) + clk_disable_unprepare(sc->clk_io); #endif return 0; @@ -794,7 +795,8 @@ static int __devexit sdhci_s3c_remove(struct platform_device *pdev) gpio_free(sc->ext_cd_gpio); #ifdef CONFIG_PM_RUNTIME - clk_prepare_enable(sc->clk_io); + if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL) + clk_prepare_enable(sc->clk_io); #endif sdhci_remove_host(host, 1); -- cgit v1.2.3 From 0062b15c107d756dd7c9e41d023e87f876320c97 Mon Sep 17 00:00:00 2001 From: Vipul Pandya Date: Tue, 6 Nov 2012 03:37:09 +0000 Subject: cxgb4: Initialize data structures before using. We should not assume reserve fields to be don't cares as fields may change. Clearing data structures before using. Signed-off-by: Jay Hernandez Signed-off-by: Vipul Pandya Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 32eec15fe4c2..01fa5b79162c 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -2519,6 +2519,7 @@ int t4_fw_bye(struct adapter *adap, unsigned int mbox) { struct fw_bye_cmd c; + memset(&c, 0, sizeof(c)); INIT_CMD(c, BYE, WRITE); return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); } @@ -2535,6 +2536,7 @@ int t4_early_init(struct adapter *adap, unsigned int mbox) { struct fw_initialize_cmd c; + memset(&c, 0, sizeof(c)); INIT_CMD(c, INITIALIZE, WRITE); return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); } @@ -2551,6 +2553,7 @@ int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset) { struct fw_reset_cmd c; + memset(&c, 0, sizeof(c)); INIT_CMD(c, RESET, WRITE); c.val = htonl(reset); return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); @@ -3278,6 +3281,7 @@ int t4_identify_port(struct adapter *adap, unsigned int mbox, unsigned int viid, { struct fw_vi_enable_cmd c; + memset(&c, 0, sizeof(c)); c.op_to_viid = htonl(FW_CMD_OP(FW_VI_ENABLE_CMD) | FW_CMD_REQUEST | FW_CMD_EXEC | FW_VI_ENABLE_CMD_VIID(viid)); c.ien_to_len16 = htonl(FW_VI_ENABLE_CMD_LED | FW_LEN16(c)); -- cgit v1.2.3 From 7fd78edc470d968daacfb472226bc021081196bd Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 6 Nov 2012 23:55:03 +0000 Subject: isdn: Make CONFIG_ISDN depend on CONFIG_NETDEVICES MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It doesn't make much sense to enable ISDN services if you don't intend to connect to a network. Therefore insisting that ISDN depends on NETDEVICES seems logical. We can then remove any guards mentioning NETDEVICES inside all subordinate drivers. This also has the nice side-effect of fixing the warning below when ISDN_I4L && !CONFIG_NETDEVICES at compile time. This patch fixes: drivers/isdn/i4l/isdn_common.c: In function ‘isdn_ioctl’: drivers/isdn/i4l/isdn_common.c:1278:8: warning: unused variable ‘s’ [-Wunused-variable] Cc: Karsten Keil Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones Signed-off-by: David S. Miller --- drivers/isdn/Kconfig | 2 +- drivers/isdn/i4l/Kconfig | 2 +- drivers/isdn/i4l/isdn_common.c | 4 ---- 3 files changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/isdn/Kconfig b/drivers/isdn/Kconfig index a233ed53913a..86cd75a0e84d 100644 --- a/drivers/isdn/Kconfig +++ b/drivers/isdn/Kconfig @@ -4,7 +4,7 @@ menuconfig ISDN bool "ISDN support" - depends on NET + depends on NET && NETDEVICES depends on !S390 && !UML ---help--- ISDN ("Integrated Services Digital Network", called RNIS in France) diff --git a/drivers/isdn/i4l/Kconfig b/drivers/isdn/i4l/Kconfig index 2302fbe70ac6..9c6650ea848e 100644 --- a/drivers/isdn/i4l/Kconfig +++ b/drivers/isdn/i4l/Kconfig @@ -6,7 +6,7 @@ if ISDN_I4L config ISDN_PPP bool "Support synchronous PPP" - depends on INET && NETDEVICES + depends on INET select SLHC help Over digital connections such as ISDN, there is no need to diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c index 8c610fa6782b..e2a945ee9f05 100644 --- a/drivers/isdn/i4l/isdn_common.c +++ b/drivers/isdn/i4l/isdn_common.c @@ -1312,7 +1312,6 @@ isdn_ioctl(struct file *file, uint cmd, ulong arg) } else return -EINVAL; break; -#ifdef CONFIG_NETDEVICES case IIOCNETGPN: /* Get peer phone number of a connected * isdn network interface */ @@ -1322,7 +1321,6 @@ isdn_ioctl(struct file *file, uint cmd, ulong arg) return isdn_net_getpeer(&phone, argp); } else return -EINVAL; -#endif default: return -EINVAL; } @@ -1352,7 +1350,6 @@ isdn_ioctl(struct file *file, uint cmd, ulong arg) case IIOCNETLCR: printk(KERN_INFO "INFO: ISDN_ABC_LCR_SUPPORT not enabled\n"); return -ENODEV; -#ifdef CONFIG_NETDEVICES case IIOCNETAIF: /* Add a network-interface */ if (arg) { @@ -1491,7 +1488,6 @@ isdn_ioctl(struct file *file, uint cmd, ulong arg) return -EFAULT; return isdn_net_force_hangup(name); break; -#endif /* CONFIG_NETDEVICES */ case IIOCSETVER: dev->net_verbose = arg; printk(KERN_INFO "isdn: Verbose-Level is %d\n", dev->net_verbose); -- cgit v1.2.3 From 0dad9e94bdb1e424c4feeed715dff2fe51528289 Mon Sep 17 00:00:00 2001 From: Vipul Pandya Date: Wed, 7 Nov 2012 03:45:46 +0000 Subject: cxgb4: Fix initialization of SGE_CONTROL register INGPADBOUNDARY_MASK is already shifted. No need to shift it again. On reloading a driver it was resulting in a bad SGE FL MTU sizes [1536, 9088] error. This only causes an issue on systems that have L1 cache size of 32B, 128B, 512B, 2048B or 4096B. Signed-off-by: Jay Hernandez Signed-off-by: Vipul Pandya Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 01fa5b79162c..730ae2cfa49e 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -2831,7 +2831,7 @@ int t4_fixup_host_params(struct adapter *adap, unsigned int page_size, HOSTPAGESIZEPF7(sge_hps)); t4_set_reg_field(adap, SGE_CONTROL, - INGPADBOUNDARY(INGPADBOUNDARY_MASK) | + INGPADBOUNDARY_MASK | EGRSTATUSPAGESIZE_MASK, INGPADBOUNDARY(fl_align_log - 5) | EGRSTATUSPAGESIZE(stat_len != 64)); -- cgit v1.2.3 From 4fe5f079b499d7ff34fd49f4005f09018c4e80aa Mon Sep 17 00:00:00 2001 From: Ian Coolidge Date: Wed, 7 Nov 2012 14:39:18 +0000 Subject: usb: gadget: g_ether: fix frame size check for 802.1Q Checking skb->len against ETH_FRAME_LEN assumes a 1514 ethernet frame size. With an 802.1Q VLAN header, ethernet frame length can now be 1518. Validate frame length against that. Signed-off-by: Ian Coolidge Signed-off-by: David S. Miller --- drivers/usb/gadget/u_ether.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index 6458764994ef..4ec3c0d7a18b 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -20,6 +20,7 @@ #include #include #include +#include #include "u_ether.h" @@ -295,7 +296,7 @@ static void rx_complete(struct usb_ep *ep, struct usb_request *req) while (skb2) { if (status < 0 || ETH_HLEN > skb2->len - || skb2->len > ETH_FRAME_LEN) { + || skb2->len > VLAN_ETH_FRAME_LEN) { dev->net->stats.rx_errors++; dev->net->stats.rx_length_errors++; DBG(dev, "rx length %d\n", skb2->len); -- cgit v1.2.3 From a66fe1653f4e81c007a68ca975067432a42df05b Mon Sep 17 00:00:00 2001 From: Ian Coolidge Date: Wed, 7 Nov 2012 14:39:19 +0000 Subject: net: usb: cdc_eem: Fix rx skb allocation for 802.1Q VLANs cdc_eem frames might need to contain 802.1Q VLAN Ethernet frames. URB/skb sizing from usbnet will default to the hard_mtu, so account for the VLAN header by expanding that via hard_header_len Signed-off-by: Ian Coolidge Signed-off-by: David S. Miller --- drivers/net/usb/cdc_eem.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c index c81e278629ff..08d55b6bf272 100644 --- a/drivers/net/usb/cdc_eem.c +++ b/drivers/net/usb/cdc_eem.c @@ -31,6 +31,7 @@ #include #include #include +#include /* @@ -92,7 +93,7 @@ static int eem_bind(struct usbnet *dev, struct usb_interface *intf) /* no jumbogram (16K) support for now */ - dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN; + dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN + VLAN_HLEN; dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; return 0; -- cgit v1.2.3 From 2d9e7ea690d76b95a7eb3fd8eb3823b4f5946050 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Tue, 6 Nov 2012 17:23:35 +0100 Subject: [media] dvb_usb_v2: fix pid_filter callback error logging Code block braces were missing which leds broken error logging and compiler warning. drivers/media/usb/dvb-usb-v2/dvb_usb_core.c: In function 'dvb_usb_ctrl_feed': drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:291:12: warning: 'ret' may be used uninitialized in this function [-Wuninitialized] Reported-by: Stephen Rothwell Reported-by: Milan Tuma Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb-v2/dvb_usb_core.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c index 9859d2a2449b..ba51f65204de 100644 --- a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c +++ b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c @@ -283,14 +283,13 @@ static inline int dvb_usb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed, /* activate the pid on the device pid filter */ if (adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER && - adap->pid_filtering && - adap->props->pid_filter) + adap->pid_filtering && adap->props->pid_filter) { ret = adap->props->pid_filter(adap, dvbdmxfeed->index, dvbdmxfeed->pid, (count == 1) ? 1 : 0); - if (ret < 0) - dev_err(&d->udev->dev, "%s: pid_filter() " \ - "failed=%d\n", KBUILD_MODNAME, - ret); + if (ret < 0) + dev_err(&d->udev->dev, "%s: pid_filter() failed=%d\n", + KBUILD_MODNAME, ret); + } /* start feeding if it is first pid */ if (adap->feed_count == 1 && count == 1) { -- cgit v1.2.3 From 860fe2f05fa2eacac84368e23547ec8cf3cc6652 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 8 Nov 2012 10:08:04 -0500 Subject: drm/radeon/cayman: add some missing regs to the VM reg checker MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit These regs were being wronly rejected leading to rendering issues. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=56876 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Michel Dänzer --- drivers/gpu/drm/radeon/evergreen_cs.c | 3 +++ drivers/gpu/drm/radeon/evergreend.h | 4 ++++ 2 files changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c index 95e6318b6268..c042e497e450 100644 --- a/drivers/gpu/drm/radeon/evergreen_cs.c +++ b/drivers/gpu/drm/radeon/evergreen_cs.c @@ -2725,6 +2725,9 @@ static bool evergreen_vm_reg_valid(u32 reg) /* check config regs */ switch (reg) { case GRBM_GFX_INDEX: + case CP_STRMOUT_CNTL: + case CP_COHER_CNTL: + case CP_COHER_SIZE: case VGT_VTX_VECT_EJECT_REG: case VGT_CACHE_INVALIDATION: case VGT_GS_VERTEX_REUSE: diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h index df542f1a5dfb..2bc0f6a1b428 100644 --- a/drivers/gpu/drm/radeon/evergreend.h +++ b/drivers/gpu/drm/radeon/evergreend.h @@ -91,6 +91,10 @@ #define FB_READ_EN (1 << 0) #define FB_WRITE_EN (1 << 1) +#define CP_STRMOUT_CNTL 0x84FC + +#define CP_COHER_CNTL 0x85F0 +#define CP_COHER_SIZE 0x85F4 #define CP_COHER_BASE 0x85F8 #define CP_STALLED_STAT1 0x8674 #define CP_STALLED_STAT2 0x8678 -- cgit v1.2.3 From f418b88aad0c42b4caf4d79a0cf8d14a5d0a2284 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 8 Nov 2012 10:13:24 -0500 Subject: drm/radeon/si: add some missing regs to the VM reg checker MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This register is needed for streamout to work properly. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Michel Dänzer --- drivers/gpu/drm/radeon/si.c | 1 + drivers/gpu/drm/radeon/sid.h | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index b0db712060fb..4422d630b33b 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -2474,6 +2474,7 @@ static bool si_vm_reg_valid(u32 reg) /* check config regs */ switch (reg) { case GRBM_GFX_INDEX: + case CP_STRMOUT_CNTL: case VGT_VTX_VECT_EJECT_REG: case VGT_CACHE_INVALIDATION: case VGT_ESGS_RING_SIZE: diff --git a/drivers/gpu/drm/radeon/sid.h b/drivers/gpu/drm/radeon/sid.h index 7d2a20e56577..a8871afc5b4e 100644 --- a/drivers/gpu/drm/radeon/sid.h +++ b/drivers/gpu/drm/radeon/sid.h @@ -424,6 +424,7 @@ # define RDERR_INT_ENABLE (1 << 0) # define GUI_IDLE_INT_ENABLE (1 << 19) +#define CP_STRMOUT_CNTL 0x84FC #define SCRATCH_REG0 0x8500 #define SCRATCH_REG1 0x8504 #define SCRATCH_REG2 0x8508 -- cgit v1.2.3 From 479dd5670521a46ebcb55f535f8a41919cb93696 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Tue, 6 Nov 2012 22:48:49 +0100 Subject: drm/nv41/vm: fix typo in type name It's a miracle it compiles at all - nv04_vm_priv does not exist anywhere in the tree. Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/vm/nv41.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/core/subdev/vm/nv41.c b/drivers/gpu/drm/nouveau/core/subdev/vm/nv41.c index 49050d991e75..9474cfca6e4c 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/vm/nv41.c +++ b/drivers/gpu/drm/nouveau/core/subdev/vm/nv41.c @@ -67,7 +67,7 @@ nv41_vm_unmap(struct nouveau_gpuobj *pgt, u32 pte, u32 cnt) static void nv41_vm_flush(struct nouveau_vm *vm) { - struct nv04_vm_priv *priv = (void *)vm->vmm; + struct nv04_vmmgr_priv *priv = (void *)vm->vmm; mutex_lock(&nv_subdev(priv)->mutex); nv_wr32(priv, 0x100810, 0x00000022); -- cgit v1.2.3 From a4dd4ec250fc2ac1fee371a08020bfca498a8375 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Tue, 6 Nov 2012 22:48:50 +0100 Subject: drm/nv40/graph: fix typo in type names nv04_graph_priv / nv04_graph_chan are not defined in this context... Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/engine/graph/nv40.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/core/engine/graph/nv40.c b/drivers/gpu/drm/nouveau/core/engine/graph/nv40.c index 8d0021049ec0..425001204a89 100644 --- a/drivers/gpu/drm/nouveau/core/engine/graph/nv40.c +++ b/drivers/gpu/drm/nouveau/core/engine/graph/nv40.c @@ -156,8 +156,8 @@ nv40_graph_context_ctor(struct nouveau_object *parent, static int nv40_graph_context_fini(struct nouveau_object *object, bool suspend) { - struct nv04_graph_priv *priv = (void *)object->engine; - struct nv04_graph_chan *chan = (void *)object; + struct nv40_graph_priv *priv = (void *)object->engine; + struct nv40_graph_chan *chan = (void *)object; u32 inst = 0x01000000 | nv_gpuobj(chan)->addr >> 4; int ret = 0; -- cgit v1.2.3 From 7707b701ebfea64afa6bfb23aa318fd687892754 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Tue, 6 Nov 2012 22:48:51 +0100 Subject: drm/nv40/mpeg: fix context handling It slipped in thanks to typeless API. Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/engine/mpeg/nv40.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/core/engine/mpeg/nv40.c b/drivers/gpu/drm/nouveau/core/engine/mpeg/nv40.c index 12418574efea..f7c581ad1991 100644 --- a/drivers/gpu/drm/nouveau/core/engine/mpeg/nv40.c +++ b/drivers/gpu/drm/nouveau/core/engine/mpeg/nv40.c @@ -38,7 +38,7 @@ struct nv40_mpeg_priv { }; struct nv40_mpeg_chan { - struct nouveau_mpeg base; + struct nouveau_mpeg_chan base; }; /******************************************************************************* -- cgit v1.2.3 From 11d92561c81be2f4a7af37f035e1af294b960abe Mon Sep 17 00:00:00 2001 From: Kelly Doran Date: Wed, 7 Nov 2012 10:02:04 +1000 Subject: drm/nvc0/disp: fix regression in vblank semaphore release Signed-off-by: Kelly Doran Reviewed-by: Maarten Lankhorst Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/engine/disp/nv50.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c b/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c index 16a9afb1060b..05a909a17cee 100644 --- a/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c +++ b/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c @@ -22,6 +22,8 @@ * Authors: Ben Skeggs */ +#include + #include #include @@ -37,6 +39,7 @@ nv50_disp_sclass[] = { static void nv50_disp_intr_vblank(struct nv50_disp_priv *priv, int crtc) { + struct nouveau_bar *bar = nouveau_bar(priv); struct nouveau_disp *disp = &priv->base; struct nouveau_software_chan *chan, *temp; unsigned long flags; @@ -46,18 +49,19 @@ nv50_disp_intr_vblank(struct nv50_disp_priv *priv, int crtc) if (chan->vblank.crtc != crtc) continue; - nv_wr32(priv, 0x001704, chan->vblank.channel); - nv_wr32(priv, 0x001710, 0x80000000 | chan->vblank.ctxdma); - if (nv_device(priv)->chipset == 0x50) { + nv_wr32(priv, 0x001704, chan->vblank.channel); + nv_wr32(priv, 0x001710, 0x80000000 | chan->vblank.ctxdma); + bar->flush(bar); nv_wr32(priv, 0x001570, chan->vblank.offset); nv_wr32(priv, 0x001574, chan->vblank.value); } else { - if (nv_device(priv)->chipset >= 0xc0) { - nv_wr32(priv, 0x06000c, - upper_32_bits(chan->vblank.offset)); - } - nv_wr32(priv, 0x060010, chan->vblank.offset); + nv_wr32(priv, 0x001718, 0x80000000 | chan->vblank.channel); + bar->flush(bar); + nv_wr32(priv, 0x06000c, + upper_32_bits(chan->vblank.offset)); + nv_wr32(priv, 0x060010, + lower_32_bits(chan->vblank.offset)); nv_wr32(priv, 0x060014, chan->vblank.value); } -- cgit v1.2.3 From df285500b203a5603b1cdd1b16f42ab7a3544d7b Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Thu, 8 Nov 2012 17:19:38 +0100 Subject: drm/nouveau: fix acpi edid retrieval Commit c0077061e7ea accidentally inverted the logic for nouveau_acpi_edid, causing it to only show a connector as connected when the edid could not be retrieved with acpi. Signed-off-by: Maarten Lankhorst Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_connector.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 9a6e2cb282dc..d3595b23434a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -355,7 +355,7 @@ nouveau_connector_detect_lvds(struct drm_connector *connector, bool force) * valid - it's not (rh#613284) */ if (nv_encoder->dcb->lvdsconf.use_acpi_for_edid) { - if (!(nv_connector->edid = nouveau_acpi_edid(dev, connector))) { + if ((nv_connector->edid = nouveau_acpi_edid(dev, connector))) { status = connector_status_connected; goto out; } -- cgit v1.2.3 From 237242bddc99041e15a4ca51b8439657cadaff17 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Fri, 9 Nov 2012 14:54:12 +1030 Subject: virtio: Don't access index after unregister. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Virtio wants to release used indices after the corresponding virtio device has been unregistered. However, virtio does not hold an extra reference, giving up its last reference with device_unregister(), making accessing dev->index afterwards invalid. I actually saw problems when testing my (not-yet-merged) virtio-ccw code: - device_add virtio-net,id=xxx -> creates device virtio with n>0 - device_del xxx -> deletes virtio, but calls ida_simple_remove with an index of 0 - device_add virtio-net,id=xxx -> tries to add virtio0, which is still in use... So let's save the index we want to release before calling device_unregister(). Signed-off-by: Cornelia Huck Acked-by: Sjur Brændeland Cc: stable@kernel.org Signed-off-by: Rusty Russell --- drivers/virtio/virtio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c index 1e8659ca27ef..809b0de59c09 100644 --- a/drivers/virtio/virtio.c +++ b/drivers/virtio/virtio.c @@ -225,8 +225,10 @@ EXPORT_SYMBOL_GPL(register_virtio_device); void unregister_virtio_device(struct virtio_device *dev) { + int index = dev->index; /* save for after device release */ + device_unregister(&dev->dev); - ida_simple_remove(&virtio_index_ida, dev->index); + ida_simple_remove(&virtio_index_ida, index); } EXPORT_SYMBOL_GPL(unregister_virtio_device); -- cgit v1.2.3 From 95e8f6a21996c4cc2c4574b231c6e858b749dce3 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Fri, 9 Nov 2012 10:05:57 +0100 Subject: drm/vmwgfx: Fix hibernation device reset The device would not reset properly when resuming from hibernation. Signed-off-by: Thomas Hellstrom Reviewed-by: Brian Paul Reviewed-by: Dmitry Torokhov Cc: stable@vger.kernel.org Cc: linux-graphics-maintainer@vmware.com Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index ed3c1e7ddde9..2dd185e42f21 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -1098,6 +1098,11 @@ static void vmw_pm_complete(struct device *kdev) struct drm_device *dev = pci_get_drvdata(pdev); struct vmw_private *dev_priv = vmw_priv(dev); + mutex_lock(&dev_priv->hw_mutex); + vmw_write(dev_priv, SVGA_REG_ID, SVGA_ID_2); + (void) vmw_read(dev_priv, SVGA_REG_ID); + mutex_unlock(&dev_priv->hw_mutex); + /** * Reclaim 3d reference held by fbdev and potentially * start fifo. -- cgit v1.2.3 From afcc87aa6a233e52df73552dc1dc9ae3881b7cc8 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Fri, 9 Nov 2012 10:45:14 +0100 Subject: drm/vmwgfx: Fix a case where the code would BUG when trying to pin GMR memory Signed-off-by: Thomas Hellstrom Reviewed-by: Brian Paul Reviewed-by: Dmitry Torokhov Cc: stable@vger.kernel.org Cc: linux-graphics-maintainer@vmware.com Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_dmabuf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_dmabuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_dmabuf.c index 3ce68a2e312d..d1498bfd7873 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_dmabuf.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_dmabuf.c @@ -306,7 +306,7 @@ void vmw_bo_pin(struct ttm_buffer_object *bo, bool pin) BUG_ON(!atomic_read(&bo->reserved)); BUG_ON(old_mem_type != TTM_PL_VRAM && - old_mem_type != VMW_PL_FLAG_GMR); + old_mem_type != VMW_PL_GMR); pl_flags = TTM_PL_FLAG_VRAM | VMW_PL_FLAG_GMR | TTM_PL_FLAG_CACHED; if (pin) -- cgit v1.2.3 From 41269386b0898b12f82e290604691111a0cdf75b Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Wed, 7 Nov 2012 23:52:52 +0100 Subject: [media] dvb_usb_v2: switch interruptible mutex to normal Fixes error: dvb_usb_v2: pid_filter() failed=-4 error code -4 is EINTR, Interrupted system call That error blocks I/O in some cases as -EINTR error was returned by the mutex which was protecting USB control messages. We want configure hardware to sleep mode on every case after tuning is stopped. That kind of behavior blocks it, leaving hardware some unwanted state in worst case. That error was seen every time when af9015 was plugged to USB1.1 which leads use of hardware PID filters. Stop tuning (tzap) with ctrl+c failed as driver tries to remove hardware PID filters. Tested with every hardware which uses routine in question. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c b/drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c index 0431beed0ef4..5716662b4834 100644 --- a/drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c +++ b/drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c @@ -32,9 +32,7 @@ int dvb_usbv2_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, return -EINVAL; } - ret = mutex_lock_interruptible(&d->usb_mutex); - if (ret < 0) - return ret; + mutex_lock(&d->usb_mutex); dev_dbg(&d->udev->dev, "%s: >>> %*ph\n", __func__, wlen, wbuf); -- cgit v1.2.3 From c36a7ff4578ab6294885aef5ef241aeec4cdb1f0 Mon Sep 17 00:00:00 2001 From: Jiri Engelthaler Date: Thu, 20 Sep 2012 16:49:50 +0200 Subject: mtd: slram: invalid checking of absolute end address Fixed parsing end absolute address. Signed-off-by: Jiri Engelthaler Cc: stable@vger.kernel.org Signed-off-by: Artem Bityutskiy --- drivers/mtd/devices/slram.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index 8f52fc858e48..5a5cd2ace4a6 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -240,7 +240,7 @@ static int parse_cmdline(char *devname, char *szstart, char *szlength) if (*(szlength) != '+') { devlength = simple_strtoul(szlength, &buffer, 0); - devlength = handle_unit(devlength, buffer) - devstart; + devlength = handle_unit(devlength, buffer); if (devlength < devstart) goto err_out; -- cgit v1.2.3 From 0131950ebd146b5e31508233352d6f4625af25b1 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Sat, 22 Sep 2012 11:42:31 +0530 Subject: mtd: onenand: Make flexonenand_set_boundary static Fixes the following sparse warning: drivers/mtd/onenand/onenand_base.c:3697:5: warning: symbol 'flexonenand_set_boundary' was not declared. Should it be static? Signed-off-by: Sachin Kamat Acked-by: Kyungmin Park Signed-off-by: Artem Bityutskiy --- drivers/mtd/onenand/onenand_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 7153e0d27101..b3f41f200622 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -3694,7 +3694,7 @@ static int flexonenand_check_blocks_erased(struct mtd_info *mtd, int start, int * flexonenand_set_boundary - Writes the SLC boundary * @param mtd - mtd info structure */ -int flexonenand_set_boundary(struct mtd_info *mtd, int die, +static int flexonenand_set_boundary(struct mtd_info *mtd, int die, int boundary, int lock) { struct onenand_chip *this = mtd->priv; -- cgit v1.2.3 From acd9454433e28c1a365d8b069813c35c1c3a8ac3 Mon Sep 17 00:00:00 2001 From: Marcos Chaparro Date: Tue, 6 Nov 2012 16:19:11 -0300 Subject: Bluetooth: ath3k: Add support for VAIO VPCEH [0489:e027] Added Atheros AR3011 internal bluetooth device found in Sony VAIO VPCEH to the devices list. Before this, the bluetooth module was identified as an Foxconn / Hai bluetooth device [0489:e027], now it claims to be an AtherosAR3011 Bluetooth [0cf3:3005]. T: Bus=01 Lev=02 Prnt=02 Port=04 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e027 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Marcos Chaparro Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 1 + drivers/bluetooth/btusb.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index fc2de5528dcc..b00000e8aef6 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -67,6 +67,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x13d3, 0x3304) }, { USB_DEVICE(0x0930, 0x0215) }, { USB_DEVICE(0x0489, 0xE03D) }, + { USB_DEVICE(0x0489, 0xE027) }, /* Atheros AR9285 Malbec with sflash firmware */ { USB_DEVICE(0x03F0, 0x311D) }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index debda27df9b0..ee82f2fb65f0 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -124,6 +124,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE }, + { USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE }, /* Atheros AR9285 Malbec with sflash firmware */ { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE }, -- cgit v1.2.3 From 9532021da6da48351ce48a079c673df8e3930b4a Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Thu, 8 Nov 2012 06:26:21 +0000 Subject: usbnet: ratelimit kevent may have been dropped warnings when something goes wrong, a flood of these messages can be generated by usbnet (thousands per second). This doesn't generally *help* the condition so this patch ratelimits the rate of their generation. There's an underlying problem in usbnet's kevent deferral mechanism which needs fixing, specifically that events *can* get dropped and not handled. This patch doesn't address this, but just mitigates fallout caused by the current implemention. Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index cb04f900cc46..edb81ed06950 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -359,10 +359,12 @@ static enum skb_state defer_bh(struct usbnet *dev, struct sk_buff *skb, void usbnet_defer_kevent (struct usbnet *dev, int work) { set_bit (work, &dev->flags); - if (!schedule_work (&dev->kevent)) - netdev_err(dev->net, "kevent %d may have been dropped\n", work); - else + if (!schedule_work (&dev->kevent)) { + if (net_ratelimit()) + netdev_err(dev->net, "kevent %d may have been dropped\n", work); + } else { netdev_dbg(dev->net, "kevent %d scheduled\n", work); + } } EXPORT_SYMBOL_GPL(usbnet_defer_kevent); -- cgit v1.2.3 From 103cdd1d59e1ab6abccb049093239cc8e6295816 Mon Sep 17 00:00:00 2001 From: Wang Dongsheng Date: Fri, 9 Nov 2012 04:43:51 +0000 Subject: gianfar: ethernet vanishes after restoring from hibernation If a gianfar ethernet device is down prior to hibernating a system, it will no longer be present upon system restore. For example: ~# ifconfig eth0 down ~# echo disk > /sys/power/state ~# ifconfig eth0 up SIOCSIFFLAGS: No such device This happens because the restore function bails out early upon finding devices that were not up at hibernation. In doing so, it never gets to the netif_device_attach call at the end of the restore function. Adding the netif_device_attach as done here also makes the gfar_restore code consistent with what is done in the gfar_resume code. Cc: Claudiu Manoil Signed-off-by: Wang Dongsheng Signed-off-by: Paul Gortmaker Acked-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 1d03dcdd5e56..19ac096cb07b 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -1353,8 +1353,11 @@ static int gfar_restore(struct device *dev) struct gfar_private *priv = dev_get_drvdata(dev); struct net_device *ndev = priv->ndev; - if (!netif_running(ndev)) + if (!netif_running(ndev)) { + netif_device_attach(ndev); + return 0; + } gfar_init_bds(ndev); init_registers(ndev); -- cgit v1.2.3 From 5cf8f7db8274f68b180ad277dbb0308e72b66efd Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Mon, 29 Oct 2012 23:26:56 +0000 Subject: sparc: Add sparc support for platform_get_irq() This adds sparc support for platform_get_irq that in the normal case use platform_get_resource() to get an irq. This standard approach fails for sparc as there are no resources of type IORESOURCE_IRQ for irqs for sparc. Cross platform drivers can then use this standard platform function and work on sparc instead of having to have a special case for sparc. Signed-off-by: Andreas Larsson Signed-off-by: David S. Miller --- drivers/base/platform.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 8727e9c5eea4..72c776f2a1f5 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -83,9 +83,16 @@ EXPORT_SYMBOL_GPL(platform_get_resource); */ int platform_get_irq(struct platform_device *dev, unsigned int num) { +#ifdef CONFIG_SPARC + /* sparc does not have irqs represented as IORESOURCE_IRQ resources */ + if (!dev || num >= dev->archdata.num_irqs) + return -ENXIO; + return dev->archdata.irqs[num]; +#else struct resource *r = platform_get_resource(dev, IORESOURCE_IRQ, num); return r ? r->start : -ENXIO; +#endif } EXPORT_SYMBOL_GPL(platform_get_irq); -- cgit v1.2.3 From 40a812044a11a8fd32202cd22bb76329dd188094 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Thu, 8 Nov 2012 09:03:47 -0800 Subject: Input: MT - document new 'flags' argument of input_mt_init_slots() Fixes new kernel-doc warning in input-mt.c: Warning(drivers/input/input-mt.c:38): No description found for parameter 'flags' Reported-by: Randy Dunlap Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- drivers/input/input-mt.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c index c0ec7d42c3be..1abbc170d8b7 100644 --- a/drivers/input/input-mt.c +++ b/drivers/input/input-mt.c @@ -26,10 +26,14 @@ static void copy_abs(struct input_dev *dev, unsigned int dst, unsigned int src) * input_mt_init_slots() - initialize MT input slots * @dev: input device supporting MT events and finger tracking * @num_slots: number of slots used by the device + * @flags: mt tasks to handle in core * * This function allocates all necessary memory for MT slot handling * in the input device, prepares the ABS_MT_SLOT and * ABS_MT_TRACKING_ID events for use and sets up appropriate buffers. + * Depending on the flags set, it also performs pointer emulation and + * frame synchronization. + * * May be called repeatedly. Returns -EINVAL if attempting to * reinitialize with a different number of slots. */ -- cgit v1.2.3 From 0b8728d6f140dc20690384286ade47c956edc999 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Mon, 5 Nov 2012 06:20:31 -0800 Subject: ledtrig-cpu: kill useless mutex to fix sleep in atomic context Seeing the following every time the CPU enters or leaves idle on a Beagleboard: BUG: sleeping function called from invalid context at kernel/mutex.c:269 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/0 no locks held by swapper/0/0. [] (unwind_backtrace+0x0/0xf8) from [] (mutex_lock_nested+0x24/0x380) [] (mutex_lock_nested+0x24/0x380) from [] (ledtrig_cpu+0x38/0x88) [] (ledtrig_cpu+0x38/0x88) from [] (cpu_idle+0xf4/0x120) [] (cpu_idle+0xf4/0x120) from [] (start_kernel+0x2bc/0x30c) Miles Lane has reported seeing similar splats during system suspend. The mutex in struct led_trigger_cpu appears to have no function: it resides in a per-cpu data structure which never changes after the trigger is registered. So just remove it. Reported-by: Miles Lane Signed-off-by: Nathan Lynch Signed-off-by: Bryan Wu --- drivers/leds/ledtrig-cpu.c | 21 --------------------- 1 file changed, 21 deletions(-) (limited to 'drivers') diff --git a/drivers/leds/ledtrig-cpu.c b/drivers/leds/ledtrig-cpu.c index b312056da14d..4239b3955ff0 100644 --- a/drivers/leds/ledtrig-cpu.c +++ b/drivers/leds/ledtrig-cpu.c @@ -33,8 +33,6 @@ struct led_trigger_cpu { char name[MAX_NAME_LEN]; struct led_trigger *_trig; - struct mutex lock; - int lock_is_inited; }; static DEFINE_PER_CPU(struct led_trigger_cpu, cpu_trig); @@ -50,12 +48,6 @@ void ledtrig_cpu(enum cpu_led_event ledevt) { struct led_trigger_cpu *trig = &__get_cpu_var(cpu_trig); - /* mutex lock should be initialized before calling mutex_call() */ - if (!trig->lock_is_inited) - return; - - mutex_lock(&trig->lock); - /* Locate the correct CPU LED */ switch (ledevt) { case CPU_LED_IDLE_END: @@ -75,8 +67,6 @@ void ledtrig_cpu(enum cpu_led_event ledevt) /* Will leave the LED as it is */ break; } - - mutex_unlock(&trig->lock); } EXPORT_SYMBOL(ledtrig_cpu); @@ -117,14 +107,9 @@ static int __init ledtrig_cpu_init(void) for_each_possible_cpu(cpu) { struct led_trigger_cpu *trig = &per_cpu(cpu_trig, cpu); - mutex_init(&trig->lock); - snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu); - mutex_lock(&trig->lock); led_trigger_register_simple(trig->name, &trig->_trig); - trig->lock_is_inited = 1; - mutex_unlock(&trig->lock); } register_syscore_ops(&ledtrig_cpu_syscore_ops); @@ -142,15 +127,9 @@ static void __exit ledtrig_cpu_exit(void) for_each_possible_cpu(cpu) { struct led_trigger_cpu *trig = &per_cpu(cpu_trig, cpu); - mutex_lock(&trig->lock); - led_trigger_unregister_simple(trig->_trig); trig->_trig = NULL; memset(trig->name, 0, MAX_NAME_LEN); - trig->lock_is_inited = 0; - - mutex_unlock(&trig->lock); - mutex_destroy(&trig->lock); } unregister_syscore_ops(&ledtrig_cpu_syscore_ops); -- cgit v1.2.3 From 6b90466cfec2a2fe027187d675d8d14217c12d82 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 12 Nov 2012 10:16:09 +0100 Subject: HID: microsoft: do not use compound literal - fix build In patch "HID: microsoft: fix invalid rdesc for 3k kbd" I fixed support for MS 3k keyboards. However the added check using memcmp and a compound statement breaks build on architectures where memcmp is a macro with parameters. hid-microsoft.c:51:18: error: macro "memcmp" passed 6 arguments, but takes just 3 On x86_64, memcmp is a function, so I did not see the error. Signed-off-by: Jiri Slaby Reported-by: Geert Uytterhoeven Signed-off-by: Jiri Kosina --- drivers/hid/hid-microsoft.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c index f676c01bb471..6fcd466d0825 100644 --- a/drivers/hid/hid-microsoft.c +++ b/drivers/hid/hid-microsoft.c @@ -46,9 +46,9 @@ static __u8 *ms_report_fixup(struct hid_device *hdev, __u8 *rdesc, rdesc[559] = 0x45; } /* the same as above (s/usage/physical/) */ - if ((quirks & MS_RDESC_3K) && *rsize == 106 && - !memcmp((char []){ 0x19, 0x00, 0x29, 0xff }, - &rdesc[94], 4)) { + if ((quirks & MS_RDESC_3K) && *rsize == 106 && rdesc[94] == 0x19 && + rdesc[95] == 0x00 && rdesc[96] == 0x29 && + rdesc[97] == 0xff) { rdesc[94] = 0x35; rdesc[96] = 0x45; } -- cgit v1.2.3 From 4cf2d3b1b6ff9b7b6af1d2dbf1b63aa465250bc2 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 22 Oct 2012 15:57:57 +0200 Subject: clk: ux500: Register i2c clock lookups for u8500 Cc: Ben Dooks Cc: Wolfram Sang Acked-by: Linus Walleij Acked-by: Lee Jones Signed-off-by: Ulf Hansson Signed-off-by: Mike Turquette --- drivers/clk/ux500/u8500_clk.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index ca4a25ed844c..7ad01aa30efe 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -228,6 +228,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", U8500_CLKRST1_BASE, BIT(2), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.1"); + clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", U8500_CLKRST1_BASE, BIT(3), 0); clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", U8500_CLKRST1_BASE, @@ -239,6 +241,7 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", U8500_CLKRST1_BASE, BIT(6), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.2"); clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", U8500_CLKRST1_BASE, BIT(7), 0); @@ -255,11 +258,14 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", U8500_CLKRST1_BASE, BIT(10), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.4"); + clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", U8500_CLKRST1_BASE, BIT(11), 0); clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", U8500_CLKRST2_BASE, BIT(0), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.3"); clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", U8500_CLKRST2_BASE, BIT(1), 0); @@ -284,7 +290,6 @@ void u8500_clk_init(void) BIT(6), 0); clk_register_clkdev(clk, "apb_pclk", "sdi1"); - clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", U8500_CLKRST2_BASE, BIT(7), 0); clk_register_clkdev(clk, "apb_pclk", "sdi3"); @@ -318,8 +323,10 @@ void u8500_clk_init(void) BIT(1), 0); clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", U8500_CLKRST3_BASE, BIT(2), 0); + clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", U8500_CLKRST3_BASE, BIT(3), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.0"); clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", U8500_CLKRST3_BASE, BIT(4), 0); @@ -401,6 +408,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(2), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.1"); + clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk", U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE); clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk", @@ -412,17 +421,23 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(6), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.2"); + clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk", U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE); /* FIXME: Redefinition of BIT(3). */ + clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(9), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.4"); + clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk", U8500_CLKRST1_BASE, BIT(10), CLK_SET_RATE_GATE); /* Periph2 */ clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk", U8500_CLKRST2_BASE, BIT(0), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.3"); clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk", U8500_CLKRST2_BASE, BIT(2), CLK_SET_RATE_GATE); @@ -452,8 +467,10 @@ void u8500_clk_init(void) U8500_CLKRST3_BASE, BIT(1), CLK_SET_RATE_GATE); clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk", U8500_CLKRST3_BASE, BIT(2), CLK_SET_RATE_GATE); + clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk", U8500_CLKRST3_BASE, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.0"); clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk", U8500_CLKRST3_BASE, BIT(4), CLK_SET_RATE_GATE); -- cgit v1.2.3 From 08b1f1c7b9bf0f6fe9e2ce3369928955554a958b Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 22 Oct 2012 15:57:58 +0200 Subject: clk: ux500: Register ssp clock lookups for u8500 Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Acked-by: Lee Jones Signed-off-by: Mike Turquette --- drivers/clk/ux500/u8500_clk.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index 7ad01aa30efe..36ef41d90d67 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -321,8 +321,11 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", U8500_CLKRST3_BASE, BIT(1), 0); + clk_register_clkdev(clk, "apb_pclk", "ssp0"); + clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", U8500_CLKRST3_BASE, BIT(2), 0); + clk_register_clkdev(clk, "apb_pclk", "ssp1"); clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", U8500_CLKRST3_BASE, BIT(3), 0); @@ -465,8 +468,11 @@ void u8500_clk_init(void) /* Periph3 */ clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk", U8500_CLKRST3_BASE, BIT(1), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "ssp0"); + clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk", U8500_CLKRST3_BASE, BIT(2), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "ssp1"); clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk", U8500_CLKRST3_BASE, BIT(3), CLK_SET_RATE_GATE); -- cgit v1.2.3 From 15e66cd8d029de8055822a98c5a72a4414ffc0a6 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 22 Oct 2012 15:57:59 +0200 Subject: clk: ux500: Register msp clock lookups for u8500 Cc: Mark Brown Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Acked-by: Lee Jones Signed-off-by: Mike Turquette --- drivers/clk/ux500/u8500_clk.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers') diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index 36ef41d90d67..be843ba1f49a 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -232,8 +232,13 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", U8500_CLKRST1_BASE, BIT(3), 0); + clk_register_clkdev(clk, "apb_pclk", "msp0"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.0"); + clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", U8500_CLKRST1_BASE, BIT(4), 0); + clk_register_clkdev(clk, "apb_pclk", "msp1"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.1"); clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", U8500_CLKRST1_BASE, BIT(5), 0); @@ -262,6 +267,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", U8500_CLKRST1_BASE, BIT(11), 0); + clk_register_clkdev(clk, "apb_pclk", "msp3"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.3"); clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", U8500_CLKRST2_BASE, BIT(0), 0); @@ -285,6 +292,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", U8500_CLKRST2_BASE, BIT(5), 0); + clk_register_clkdev(clk, "apb_pclk", "msp2"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.2"); clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", U8500_CLKRST2_BASE, BIT(6), 0); @@ -415,8 +424,13 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk", U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp0"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.0"); + clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk", U8500_CLKRST1_BASE, BIT(4), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp1"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.1"); clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk", U8500_CLKRST1_BASE, BIT(5), CLK_SET_RATE_GATE); @@ -436,6 +450,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk", U8500_CLKRST1_BASE, BIT(10), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp3"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.3"); /* Periph2 */ clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk", @@ -448,6 +464,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk", U8500_CLKRST2_BASE, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp2"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.2"); clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk", U8500_CLKRST2_BASE, BIT(4), CLK_SET_RATE_GATE); -- cgit v1.2.3 From d4915cf5f6190b94411c3102078ac4b86149fe59 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 22 Oct 2012 15:58:00 +0200 Subject: clk: ux500: Update rtc clock lookup for u8500 Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Acked-by: Lee Jones Signed-off-by: Mike Turquette --- drivers/clk/ux500/u8500_clk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index be843ba1f49a..0aae92956844 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -40,7 +40,7 @@ void u8500_clk_init(void) CLK_IS_ROOT|CLK_IGNORE_UNUSED, 32768); clk_register_clkdev(clk, "clk32k", NULL); - clk_register_clkdev(clk, NULL, "rtc-pl031"); + clk_register_clkdev(clk, "apb_pclk", "rtc-pl031"); /* PRCMU clocks */ fw_version = prcmu_get_fw_version(); -- cgit v1.2.3 From 3d930678034e756d0960d214412d344772b21109 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 22 Oct 2012 15:58:01 +0200 Subject: clk: ux500: Register slimbus clock lookups for u8500 At the same time the prcc bit for the kclk is corrected to bit 8 instead of 3. Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Acked-by: Lee Jones Signed-off-by: Mike Turquette --- drivers/clk/ux500/u8500_clk.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index 0aae92956844..e2c17d187d98 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -254,6 +254,7 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", U8500_CLKRST1_BASE, BIT(8), 0); + clk_register_clkdev(clk, "apb_pclk", "slimbus0"); clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", U8500_CLKRST1_BASE, BIT(9), 0); @@ -441,8 +442,8 @@ void u8500_clk_init(void) clk_register_clkdev(clk, NULL, "nmk-i2c.2"); clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk", - U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE); - /* FIXME: Redefinition of BIT(3). */ + U8500_CLKRST1_BASE, BIT(8), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "slimbus0"); clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(9), CLK_SET_RATE_GATE); -- cgit v1.2.3 From d0ddfbd3d1346c1f481ec2289eef350cdba64b42 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Mon, 12 Nov 2012 18:31:35 +0200 Subject: drm/i915/sdvo: clean up connectors on intel_sdvo_init() failures Any failures in intel_sdvo_init() after the intel_sdvo_setup_output() call left behind ghost connectors, attached (with a dangling pointer) to the sdvo that has been cleaned up and freed. Properly destroy any connectors attached to the encoder. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46381 CC: Chris Wilson Signed-off-by: Jani Nikula Cc: stable@vger.kernel.org Tested-by: bjo@nord-west.org [danvet: added a comment to explain why we need to clean up connectors even when sdvo_output_setup fails.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sdvo.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 79d308da29ff..c600fb06e25e 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2382,6 +2382,18 @@ intel_sdvo_output_setup(struct intel_sdvo *intel_sdvo, uint16_t flags) return true; } +static void intel_sdvo_output_cleanup(struct intel_sdvo *intel_sdvo) +{ + struct drm_device *dev = intel_sdvo->base.base.dev; + struct drm_connector *connector, *tmp; + + list_for_each_entry_safe(connector, tmp, + &dev->mode_config.connector_list, head) { + if (intel_attached_encoder(connector) == &intel_sdvo->base) + intel_sdvo_destroy(connector); + } +} + static bool intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo, struct intel_sdvo_connector *intel_sdvo_connector, int type) @@ -2705,7 +2717,8 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) intel_sdvo->caps.output_flags) != true) { DRM_DEBUG_KMS("SDVO output failed to setup on %s\n", SDVO_NAME(intel_sdvo)); - goto err; + /* Output_setup can leave behind connectors! */ + goto err_output; } /* Only enable the hotplug irq if we need it, to work around noisy @@ -2718,12 +2731,12 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) /* Set the input timing to the screen. Assume always input 0. */ if (!intel_sdvo_set_target_input(intel_sdvo)) - goto err; + goto err_output; if (!intel_sdvo_get_input_pixel_clock_range(intel_sdvo, &intel_sdvo->pixel_clock_min, &intel_sdvo->pixel_clock_max)) - goto err; + goto err_output; DRM_DEBUG_KMS("%s device VID/DID: %02X:%02X.%02X, " "clock range %dMHz - %dMHz, " @@ -2743,6 +2756,9 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) (SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N'); return true; +err_output: + intel_sdvo_output_cleanup(intel_sdvo); + err: drm_encoder_cleanup(&intel_encoder->base); i2c_del_adapter(&intel_sdvo->ddc); -- cgit v1.2.3 From 2f4f649a69a9eb51f6e98130e19dd90a260a4145 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Mon, 12 Nov 2012 14:33:44 +0200 Subject: drm/i915: do not ignore eDP bpc settings from vbt There are laptops out there that need the eDP bpc from VBT. This is effectively a revert of commit 4344b813f105a19f793f1fd93ad775b784648b95 Author: Daniel Vetter Date: Fri Aug 10 11:10:20 2012 +0200 drm/i915: ignore eDP bpc settings from vbt but putting the VBT check after the EDID check to see them both in dmesg if this clamps more than the EDID. We have enough history with bpc clamping to warrant the extra debug info. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47641 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56401 Signed-off-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 461a637f1ef7..4154bcd7a070 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3841,6 +3841,17 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, } } + if (intel_encoder->type == INTEL_OUTPUT_EDP) { + /* Use VBT settings if we have an eDP panel */ + unsigned int edp_bpc = dev_priv->edp.bpp / 3; + + if (edp_bpc < display_bpc) { + DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); + display_bpc = edp_bpc; + } + continue; + } + /* * HDMI is either 12 or 8, so if the display lets 10bpc sneak * through, clamp it down. (Note: >12bpc will be caught below.) -- cgit v1.2.3 From 49bd665c5407a453736d3232ee58f2906b42e83c Mon Sep 17 00:00:00 2001 From: Maciej Patelczyk Date: Mon, 15 Oct 2012 14:29:03 +0200 Subject: [SCSI] isci: copy fis 0x34 response into proper buffer SATA MICROCODE DOWNALOAD fails on isci driver. After receiving Register Device to Host (FIS 0x34) frame Initiator resets phy. In the frame handler routine response (FIS 0x34) was copied into wrong buffer and upper layer did not receive any answer which resulted in timeout and reset. This patch corrects this bug. Signed-off-by: Maciej Patelczyk Signed-off-by: Lukasz Dorau Cc: Signed-off-by: James Bottomley --- drivers/scsi/isci/request.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index c1bafc3f3fb1..9594ab62702b 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -1972,7 +1972,7 @@ sci_io_request_frame_handler(struct isci_request *ireq, frame_index, (void **)&frame_buffer); - sci_controller_copy_sata_response(&ireq->stp.req, + sci_controller_copy_sata_response(&ireq->stp.rsp, frame_header, frame_buffer); -- cgit v1.2.3 From f0e3e35c9049087172c65302b42da8fe7ebb63a8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Sat, 10 Nov 2012 10:13:42 +0100 Subject: USB: keyspan: fix typo causing GPF on open MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit f79b2d0f (USB: keyspan: fix NULL-pointer dereferences and memory leaks) had a small typo which made the driver use wrong offsets when mapping serial port private data. This results in in a GPF when the port is opened. Reported-by: Richard Cc: stable Signed-off-by: Bjørn Mork Acked-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/keyspan.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 7179b0c5f814..cff8dd5b462d 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -2430,7 +2430,7 @@ static void keyspan_release(struct usb_serial *serial) static int keyspan_port_probe(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; - struct keyspan_port_private *s_priv; + struct keyspan_serial_private *s_priv; struct keyspan_port_private *p_priv; const struct keyspan_device_details *d_details; struct callbacks *cback; @@ -2445,7 +2445,6 @@ static int keyspan_port_probe(struct usb_serial_port *port) if (!p_priv) return -ENOMEM; - s_priv = usb_get_serial_data(port->serial); p_priv->device_details = d_details; /* Setup values for the various callback routines */ -- cgit v1.2.3 From fcb21645f1bd86d2be29baf48aa1b298de52ccc7 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 8 Nov 2012 11:56:42 -0600 Subject: USB: option: add Novatel E362 and Dell Wireless 5800 USB IDs The Dell 5800 appears to be a simple rebrand of the Novatel E362. Signed-off-by: Dan Williams Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 5dee7d61241e..c25d3fdf4629 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -158,6 +158,7 @@ static void option_instat_callback(struct urb *urb); #define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED 0x8001 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED 0x9000 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED 0x9001 +#define NOVATELWIRELESS_PRODUCT_E362 0x9010 #define NOVATELWIRELESS_PRODUCT_G1 0xA001 #define NOVATELWIRELESS_PRODUCT_G1_M 0xA002 #define NOVATELWIRELESS_PRODUCT_G2 0xA010 @@ -193,6 +194,9 @@ static void option_instat_callback(struct urb *urb); #define DELL_PRODUCT_5730_MINICARD_TELUS 0x8181 #define DELL_PRODUCT_5730_MINICARD_VZW 0x8182 +#define DELL_PRODUCT_5800_MINICARD_VZW 0x8195 /* Novatel E362 */ +#define DELL_PRODUCT_5800_V2_MINICARD_VZW 0x8196 /* Novatel E362 */ + #define KYOCERA_VENDOR_ID 0x0c88 #define KYOCERA_PRODUCT_KPC650 0x17da #define KYOCERA_PRODUCT_KPC680 0x180a @@ -706,6 +710,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) }, /* Novatel Ovation MC551 a.k.a. Verizon USB551L */ { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E362, 0xff, 0xff, 0xff) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) }, @@ -728,6 +733,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_SPRINT) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_TELUS) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ + { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) }, -- cgit v1.2.3 From c0bc3098871dd9b964f6b45ec1e4d70d87811744 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 8 Nov 2012 11:56:53 -0600 Subject: USB: option: add Alcatel X220/X500D USB IDs Signed-off-by: Dan Williams Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index c25d3fdf4629..edc64bb6f457 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -287,6 +287,7 @@ static void option_instat_callback(struct urb *urb); /* ALCATEL PRODUCTS */ #define ALCATEL_VENDOR_ID 0x1bbb #define ALCATEL_PRODUCT_X060S_X200 0x0000 +#define ALCATEL_PRODUCT_X220_X500D 0x0017 #define PIRELLI_VENDOR_ID 0x1266 #define PIRELLI_PRODUCT_C100_1 0x1002 @@ -1164,6 +1165,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200), .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist }, + { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D) }, { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14), -- cgit v1.2.3 From e592c5d0b7db94b485b4a2342db041a1882b7f75 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 13 Nov 2012 10:52:52 -0800 Subject: Revert "USB/host: Cleanup unneccessary irq disable code" This reverts commit 73d4066055e0e2830533041f4b91df8e6e5976ff. Martin Steigerwald reported that this change caused a hard lockup when using USB if threadirqs are enabled. Thomas pointed out that this patch is incorrect, and can cause problems. So revert it to get the previously working functionality back. Reported-by: Martin Steigerwald Cc: Thomas Gleixner Cc: Chuansheng Liu Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 16 ++++++++++++++++ drivers/usb/host/ehci-ls1x.c | 2 +- drivers/usb/host/ohci-xls.c | 2 +- 3 files changed, 18 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 1e741bca0265..f034716190ff 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2151,8 +2151,15 @@ EXPORT_SYMBOL_GPL(usb_bus_start_enum); irqreturn_t usb_hcd_irq (int irq, void *__hcd) { struct usb_hcd *hcd = __hcd; + unsigned long flags; irqreturn_t rc; + /* IRQF_DISABLED doesn't work correctly with shared IRQs + * when the first handler doesn't use it. So let's just + * assume it's never used. + */ + local_irq_save(flags); + if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd))) rc = IRQ_NONE; else if (hcd->driver->irq(hcd) == IRQ_NONE) @@ -2160,6 +2167,7 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd) else rc = IRQ_HANDLED; + local_irq_restore(flags); return rc; } EXPORT_SYMBOL_GPL(usb_hcd_irq); @@ -2347,6 +2355,14 @@ static int usb_hcd_request_irqs(struct usb_hcd *hcd, int retval; if (hcd->driver->irq) { + + /* IRQF_DISABLED doesn't work as advertised when used together + * with IRQF_SHARED. As usb_hcd_irq() will always disable + * interrupts we can remove it here. + */ + if (irqflags & IRQF_SHARED) + irqflags &= ~IRQF_DISABLED; + snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d", hcd->driver->description, hcd->self.busnum); retval = request_irq(irqnum, &usb_hcd_irq, irqflags, diff --git a/drivers/usb/host/ehci-ls1x.c b/drivers/usb/host/ehci-ls1x.c index ca759652626b..aa0f328922df 100644 --- a/drivers/usb/host/ehci-ls1x.c +++ b/drivers/usb/host/ehci-ls1x.c @@ -113,7 +113,7 @@ static int ehci_hcd_ls1x_probe(struct platform_device *pdev) goto err_put_hcd; } - ret = usb_add_hcd(hcd, irq, IRQF_SHARED); + ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); if (ret) goto err_put_hcd; diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c index 84201cd1a472..41e378f17c66 100644 --- a/drivers/usb/host/ohci-xls.c +++ b/drivers/usb/host/ohci-xls.c @@ -56,7 +56,7 @@ static int ohci_xls_probe_internal(const struct hc_driver *driver, goto err3; } - retval = usb_add_hcd(hcd, irq, IRQF_SHARED); + retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); if (retval != 0) goto err4; return retval; -- cgit v1.2.3 From 80928805babfd97b6f1721dd942a55dd2e7813ea Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Tue, 6 Nov 2012 00:08:53 +0000 Subject: smsc95xx: set MII_BUSY bit to read/write PHY regs The device datasheet specifies the BUSY bit must be set when reading or writing phy registers. This patch ensures we do that. Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc95xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 3286166415b4..362cb8cfeb92 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -184,7 +184,7 @@ static int smsc95xx_mdio_read(struct net_device *netdev, int phy_id, int idx) /* set the address, index & direction (read from PHY) */ phy_id &= dev->mii.phy_id_mask; idx &= dev->mii.reg_num_mask; - addr = (phy_id << 11) | (idx << 6) | MII_READ_; + addr = (phy_id << 11) | (idx << 6) | MII_READ_ | MII_BUSY_; ret = smsc95xx_write_reg(dev, MII_ADDR, addr); check_warn_goto_done(ret, "Error writing MII_ADDR"); @@ -221,7 +221,7 @@ static void smsc95xx_mdio_write(struct net_device *netdev, int phy_id, int idx, /* set the address, index & direction (write to PHY) */ phy_id &= dev->mii.phy_id_mask; idx &= dev->mii.reg_num_mask; - addr = (phy_id << 11) | (idx << 6) | MII_WRITE_; + addr = (phy_id << 11) | (idx << 6) | MII_WRITE_ | MII_BUSY_; ret = smsc95xx_write_reg(dev, MII_ADDR, addr); check_warn_goto_done(ret, "Error writing MII_ADDR"); -- cgit v1.2.3 From a134884ac0e9fa48786560d49ed49c5f5f686410 Mon Sep 17 00:00:00 2001 From: Stefan Raspl Date: Mon, 12 Nov 2012 23:05:16 +0000 Subject: qeth: Fix IPA_CMD_QIPASSIST return code handling Return codes of IPA_CMD_QIPASSIST are not checked, especially the ones which indicate that the command is not supported. As a result, the device driver would not enable all available features on older card generations. This patch adds proper checking and sets the bare minimum in the supported functions flags to avoid follow-on errors. Signed-off-by: Stefan Raspl Signed-off-by: Frank Blaschka Reviewed-by: Ursula Braun Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 24 ++++++++++++++++++++++-- drivers/s390/net/qeth_l2_main.c | 11 +++++++---- 2 files changed, 29 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 3e25d3150456..4d6ba00d0047 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -2942,13 +2942,33 @@ static int qeth_query_ipassists_cb(struct qeth_card *card, QETH_DBF_TEXT(SETUP, 2, "qipasscb"); cmd = (struct qeth_ipa_cmd *) data; + + switch (cmd->hdr.return_code) { + case IPA_RC_NOTSUPP: + case IPA_RC_L2_UNSUPPORTED_CMD: + QETH_DBF_TEXT(SETUP, 2, "ipaunsup"); + card->options.ipa4.supported_funcs |= IPA_SETADAPTERPARMS; + card->options.ipa6.supported_funcs |= IPA_SETADAPTERPARMS; + return -0; + default: + if (cmd->hdr.return_code) { + QETH_DBF_MESSAGE(1, "%s IPA_CMD_QIPASSIST: Unhandled " + "rc=%d\n", + dev_name(&card->gdev->dev), + cmd->hdr.return_code); + return 0; + } + } + if (cmd->hdr.prot_version == QETH_PROT_IPV4) { card->options.ipa4.supported_funcs = cmd->hdr.ipa_supported; card->options.ipa4.enabled_funcs = cmd->hdr.ipa_enabled; - } else { + } else if (cmd->hdr.prot_version == QETH_PROT_IPV6) { card->options.ipa6.supported_funcs = cmd->hdr.ipa_supported; card->options.ipa6.enabled_funcs = cmd->hdr.ipa_enabled; - } + } else + QETH_DBF_MESSAGE(1, "%s IPA_CMD_QIPASSIST: Flawed LIC detected" + "\n", dev_name(&card->gdev->dev)); QETH_DBF_TEXT(SETUP, 2, "suppenbl"); QETH_DBF_TEXT_(SETUP, 2, "%08x", (__u32)cmd->hdr.ipa_supported); QETH_DBF_TEXT_(SETUP, 2, "%08x", (__u32)cmd->hdr.ipa_enabled); diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index e67e0258aec5..84e8f1d4d216 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -626,10 +626,13 @@ static int qeth_l2_request_initial_mac(struct qeth_card *card) QETH_DBF_TEXT(SETUP, 2, "doL2init"); QETH_DBF_TEXT_(SETUP, 2, "doL2%s", CARD_BUS_ID(card)); - rc = qeth_query_setadapterparms(card); - if (rc) { - QETH_DBF_MESSAGE(2, "could not query adapter parameters on " - "device %s: x%x\n", CARD_BUS_ID(card), rc); + if (qeth_is_supported(card, IPA_SETADAPTERPARMS)) { + rc = qeth_query_setadapterparms(card); + if (rc) { + QETH_DBF_MESSAGE(2, "could not query adapter " + "parameters on device %s: x%x\n", + CARD_BUS_ID(card), rc); + } } if (card->info.type == QETH_CARD_TYPE_IQD || -- cgit v1.2.3 From 7702745b15128e5f0659693736a864e35be1c807 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Mon, 12 Nov 2012 23:05:17 +0000 Subject: qeth: set new mac even if old mac is gone If the set_mac_address() function of qeth is invoked, qeth deletes the old mac address first on OSA. Only if deletion returns successfully the new mac address is set on OSA. Deletion may return with a return value "MAC not found on OSA". In this case qeth should continue setting the new mac address. When the OSA cable is pulled, OSA forgets any set mac address. If the OSA network interface acts as a slave to a bonding master interface, bonding can invoke the set_mac_address function for failover purposes and depends on successful setting of the new mac address even though the old mac address could no longer be deleted. Signed-off-by: Ursula Braun Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l2_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 84e8f1d4d216..fddb62654b6a 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -679,7 +679,7 @@ static int qeth_l2_set_mac_address(struct net_device *dev, void *p) return -ERESTARTSYS; } rc = qeth_l2_send_delmac(card, &card->dev->dev_addr[0]); - if (!rc) + if (!rc || (rc == IPA_RC_L2_MAC_NOT_FOUND)) rc = qeth_l2_send_setmac(card, addr->sa_data); return rc ? -EINVAL : 0; } -- cgit v1.2.3 From bbc8d9228ea8e37ce29fa96150d10b85a2c7be60 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Tue, 13 Nov 2012 03:19:43 +0000 Subject: net: cdc_ncm: add Huawei devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A number of Huawei 3G and LTE modems implement a CDC NCM function, including the necessary functional descriptors, but using a non standard interface layout and class/subclass/protocol codes. These devices can be handled by this driver with only a minor change to the probing logic, allowing a single combined control and data interface. This works because the devices - include a CDC Union descriptor labelling the combined interface as both master and slave, and - have an alternate setting #1 for the bulk endpoints on the combined interface. The 3G/LTE network connection is managed by vendor specific AT commands on a serial function in the same composite device. Handling the managment function is out of the scope of this driver. It will be handled by an appropriate USB serial driver. Reported-and-Tested-by: Olof Ermis Reported-and-Tested-by: Tommy Cheng Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ncm.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 4cd582a4f625..74fab1a40156 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -540,10 +540,12 @@ advance: (ctx->ether_desc == NULL) || (ctx->control != intf)) goto error; - /* claim interfaces, if any */ - temp = usb_driver_claim_interface(driver, ctx->data, dev); - if (temp) - goto error; + /* claim data interface, if different from control */ + if (ctx->data != ctx->control) { + temp = usb_driver_claim_interface(driver, ctx->data, dev); + if (temp) + goto error; + } iface_no = ctx->data->cur_altsetting->desc.bInterfaceNumber; @@ -623,6 +625,10 @@ static void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf) tasklet_kill(&ctx->bh); + /* handle devices with combined control and data interface */ + if (ctx->control == ctx->data) + ctx->data = NULL; + /* disconnect master --> disconnect slave */ if (intf == ctx->control && ctx->data) { usb_set_intfdata(ctx->data, NULL); @@ -1245,6 +1251,14 @@ static const struct usb_device_id cdc_devs[] = { .driver_info = (unsigned long) &wwan_info, }, + /* Huawei NCM devices disguised as vendor specific */ + { USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x16), + .driver_info = (unsigned long)&wwan_info, + }, + { USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x46), + .driver_info = (unsigned long)&wwan_info, + }, + /* Generic CDC-NCM devices */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE), -- cgit v1.2.3 From 52b702ffa509595c5d04a1a1d0f63acf92b4789b Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 9 Nov 2012 13:35:24 +0000 Subject: vxlan: Fix error that was resulting in VXLAN MTU size being 10 bytes too large This change fixes an issue I found where VXLAN frames were fragmented when they were up to the VXLAN MTU size. I root caused the issue to the fact that the headroom was 4 + 20 + 8 + 8. This math doesn't appear to be correct because we are not inserting a VLAN header, but instead a 2nd Ethernet header. As such the math for the overhead should be 20 + 8 + 8 + 14 to account for the extra headers that are inserted for VXLAN. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 7b4adde93c01..0c4d0f49ab46 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -50,8 +50,8 @@ #define VXLAN_N_VID (1u << 24) #define VXLAN_VID_MASK (VXLAN_N_VID - 1) -/* VLAN + IP header + UDP + VXLAN */ -#define VXLAN_HEADROOM (4 + 20 + 8 + 8) +/* IP header + UDP + VXLAN + Ethernet header */ +#define VXLAN_HEADROOM (20 + 8 + 8 + 14) #define VXLAN_FLAGS 0x08000000 /* struct vxlanhdr.vx_flags required value. */ -- cgit v1.2.3 From d38e0e3fed4f58bcddef4dc93a591dfe2f651cb0 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Wed, 7 Nov 2012 18:21:51 -0800 Subject: Revert "Staging: Android alarm: IOCTL command encoding fix" Commit 6bd4a5d96c08dc2380f8053b1bd4f879f55cd3c9 changed the ANDROID_ALARM_GET_TIME ioctls from IOW to IOR. While technically correct, the _IOC_DIR bits are ignored by alarm_ioctl, so the commit breaks a userspace ABI used by all existing Android devices for a purely cosmetic reason. Revert it. Cc: stable Cc: Dae S. Kim Signed-off-by: Colin Cross Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/android_alarm.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/android/android_alarm.h b/drivers/staging/android/android_alarm.h index f2ffd963f1c3..d0cafd637199 100644 --- a/drivers/staging/android/android_alarm.h +++ b/drivers/staging/android/android_alarm.h @@ -51,12 +51,10 @@ enum android_alarm_return_flags { #define ANDROID_ALARM_WAIT _IO('a', 1) #define ALARM_IOW(c, type, size) _IOW('a', (c) | ((type) << 4), size) -#define ALARM_IOR(c, type, size) _IOR('a', (c) | ((type) << 4), size) - /* Set alarm */ #define ANDROID_ALARM_SET(type) ALARM_IOW(2, type, struct timespec) #define ANDROID_ALARM_SET_AND_WAIT(type) ALARM_IOW(3, type, struct timespec) -#define ANDROID_ALARM_GET_TIME(type) ALARM_IOR(4, type, struct timespec) +#define ANDROID_ALARM_GET_TIME(type) ALARM_IOW(4, type, struct timespec) #define ANDROID_ALARM_SET_RTC _IOW('a', 5, struct timespec) #define ANDROID_ALARM_BASE_CMD(cmd) (cmd & ~(_IOC(0, 0, 0xf0, 0))) #define ANDROID_ALARM_IOCTL_TO_TYPE(cmd) (_IOC_NR(cmd) >> 4) -- cgit v1.2.3 From aa1e3e81e75ceb3d977c3292cefafcd5179eb8b8 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 13 Nov 2012 22:27:19 +0100 Subject: i2c-mux-pinctrl: Fix probe error path When allocating the memory for i2c busses, the code checked the wrong variable and thus never detected if there was a memory error. Signed-off-by: Guenter Roeck Cc: stable@vger.kernel.org Signed-off-by: Jean Delvare --- drivers/i2c/muxes/i2c-mux-pinctrl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c index 5f097f309b9f..7fa5b24b16db 100644 --- a/drivers/i2c/muxes/i2c-mux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c @@ -169,7 +169,7 @@ static int __devinit i2c_mux_pinctrl_probe(struct platform_device *pdev) mux->busses = devm_kzalloc(&pdev->dev, sizeof(mux->busses) * mux->pdata->bus_count, GFP_KERNEL); - if (!mux->states) { + if (!mux->busses) { dev_err(&pdev->dev, "Cannot allocate busses\n"); ret = -ENOMEM; goto err; -- cgit v1.2.3 From eb5ce43997b10dd07a63befeb26778d996c5a356 Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Tue, 13 Nov 2012 13:29:15 +0000 Subject: vxlan: fix a typo. Use eXtensible and not eXtensiable in the comment on top. Signed-off-by: Rami Rosen Acked-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 0c4d0f49ab46..3d0bf664ea35 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -1,5 +1,5 @@ /* - * VXLAN: Virtual eXtensiable Local Area Network + * VXLAN: Virtual eXtensible Local Area Network * * Copyright (c) 2012 Vyatta Inc. * -- cgit v1.2.3 From 1ba56fb45a927d083f655302e75a1911a75b5da6 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 13 Nov 2012 13:10:59 +0000 Subject: vxlan: Update hard_header_len based on lowerdev when instantiating VXLAN In the event of a VXLAN device being linked to a device that has a hard_header_len greater than that of standard ethernet we could end up with the hard_header_len not being large enough for outgoing frames. In order to prevent this we should update the length when a lowerdev is provided. Signed-off-by: Alexander Duyck Acked-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 3d0bf664ea35..8b5c61917076 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -1102,6 +1102,10 @@ static int vxlan_newlink(struct net *net, struct net_device *dev, if (!tb[IFLA_MTU]) dev->mtu = lowerdev->mtu - VXLAN_HEADROOM; + + /* update header length based on lower device */ + dev->hard_header_len = lowerdev->hard_header_len + + VXLAN_HEADROOM; } if (data[IFLA_VXLAN_TOS]) -- cgit v1.2.3 From 3c6bdaeab4fda6c9fdd5f3f5c610dea97bddf7d6 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Tue, 18 Sep 2012 12:19:30 -0400 Subject: [SCSI] Add a report opcode helper The REPORT SUPPORTED OPERATION CODES command can be used to query whether a given opcode is supported by a device. Add a helper function that allows us to look up commands. We only issue RSOC if the device reports compliance with SPC-3 or later. But to err on the side of caution we disable the command for ATA, FireWire and USB. Signed-off-by: Martin K. Petersen Acked-by: Mike Snitzer Signed-off-by: James Bottomley --- drivers/ata/libata-scsi.c | 1 + drivers/firewire/sbp2.c | 1 + drivers/scsi/scsi.c | 45 ++++++++++++++++++++++++++++++++++++++++++ drivers/usb/storage/scsiglue.c | 3 +++ 4 files changed, 50 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index e3bda074fa12..7c2dead60518 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1052,6 +1052,7 @@ static void ata_scsi_sdev_config(struct scsi_device *sdev) { sdev->use_10_for_rw = 1; sdev->use_10_for_ms = 1; + sdev->no_report_opcodes = 1; /* Schedule policy is determined by ->qc_defer() callback and * it needs to see every deferred qc. Set dev_blocked to 1 to diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c index 1162d6b3bf85..f82e9d4295d0 100644 --- a/drivers/firewire/sbp2.c +++ b/drivers/firewire/sbp2.c @@ -1546,6 +1546,7 @@ static int sbp2_scsi_slave_configure(struct scsi_device *sdev) struct sbp2_logical_unit *lu = sdev->hostdata; sdev->use_10_for_rw = 1; + sdev->no_report_opcodes = 1; if (sbp2_param_exclusive_login) sdev->manage_start_stop = 1; diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 2936b447cae9..2c0d0ec8150b 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -55,6 +55,7 @@ #include #include #include +#include #include #include @@ -1061,6 +1062,50 @@ int scsi_get_vpd_page(struct scsi_device *sdev, u8 page, unsigned char *buf, } EXPORT_SYMBOL_GPL(scsi_get_vpd_page); +/** + * scsi_report_opcode - Find out if a given command opcode is supported + * @sdev: scsi device to query + * @buffer: scratch buffer (must be at least 20 bytes long) + * @len: length of buffer + * @opcode: opcode for command to look up + * + * Uses the REPORT SUPPORTED OPERATION CODES to look up the given + * opcode. Returns 0 if RSOC fails or if the command opcode is + * unsupported. Returns 1 if the device claims to support the command. + */ +int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer, + unsigned int len, unsigned char opcode) +{ + unsigned char cmd[16]; + struct scsi_sense_hdr sshdr; + int result; + + if (sdev->no_report_opcodes || sdev->scsi_level < SCSI_SPC_3) + return 0; + + memset(cmd, 0, 16); + cmd[0] = MAINTENANCE_IN; + cmd[1] = MI_REPORT_SUPPORTED_OPERATION_CODES; + cmd[2] = 1; /* One command format */ + cmd[3] = opcode; + put_unaligned_be32(len, &cmd[6]); + memset(buffer, 0, len); + + result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer, len, + &sshdr, 30 * HZ, 3, NULL); + + if (result && scsi_sense_valid(&sshdr) && + sshdr.sense_key == ILLEGAL_REQUEST && + (sshdr.asc == 0x20 || sshdr.asc == 0x24) && sshdr.ascq == 0x00) + return 0; + + if ((buffer[1] & 3) == 3) /* Command supported */ + return 1; + + return 0; +} +EXPORT_SYMBOL(scsi_report_opcode); + /** * scsi_device_get - get an additional reference to a scsi_device * @sdev: device to get a reference to diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index a3d54366afcc..6ab376a7c501 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -186,6 +186,9 @@ static int slave_configure(struct scsi_device *sdev) /* Some devices don't handle VPD pages correctly */ sdev->skip_vpd_pages = 1; + /* Do not attempt to use REPORT SUPPORTED OPERATION CODES */ + sdev->no_report_opcodes = 1; + /* Some disks return the total number of blocks in response * to READ CAPACITY rather than the highest block number. * If this device makes that mistake, tell the sd driver. */ -- cgit v1.2.3 From 26e85fcd15f68b57d9ba645cd3591117a8ac0e05 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Tue, 18 Sep 2012 12:19:31 -0400 Subject: [SCSI] sd: Permit merged discard requests Support requests with more than one bio payload for discards. The total number of bytes to be discarded is stored in req->__data_len and used in sd_done() to complete the I/O. Signed-off-by: Martin K. Petersen Reviewed-by: Mike Snitzer Signed-off-by: James Bottomley --- drivers/scsi/sd.c | 32 +++++++++++++++++++------------- 1 file changed, 19 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 12f6fdfc1147..c6af4c1a9ca3 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -583,29 +583,26 @@ static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode) } /** - * scsi_setup_discard_cmnd - unmap blocks on thinly provisioned device + * sd_setup_discard_cmnd - unmap blocks on thinly provisioned device * @sdp: scsi device to operate one * @rq: Request to prepare * * Will issue either UNMAP or WRITE SAME(16) depending on preference * indicated by target device. **/ -static int scsi_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq) +static int sd_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq) { struct scsi_disk *sdkp = scsi_disk(rq->rq_disk); - struct bio *bio = rq->bio; - sector_t sector = bio->bi_sector; - unsigned int nr_sectors = bio_sectors(bio); + sector_t sector = blk_rq_pos(rq); + unsigned int nr_sectors = blk_rq_sectors(rq); + unsigned int nr_bytes = blk_rq_bytes(rq); unsigned int len; int ret; char *buf; struct page *page; - if (sdkp->device->sector_size == 4096) { - sector >>= 3; - nr_sectors >>= 3; - } - + sector >>= ilog2(sdp->sector_size) - 9; + nr_sectors >>= ilog2(sdp->sector_size) - 9; rq->timeout = SD_TIMEOUT; memset(rq->cmd, 0, rq->cmd_len); @@ -660,6 +657,7 @@ static int scsi_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq) blk_add_request_payload(rq, page, len); ret = scsi_setup_blk_pc_cmnd(sdp, rq); rq->buffer = page_address(page); + rq->__data_len = nr_bytes; out: if (ret != BLKPREP_OK) { @@ -712,7 +710,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) * block PC requests to make life easier. */ if (rq->cmd_flags & REQ_DISCARD) { - ret = scsi_setup_discard_cmnd(sdp, rq); + ret = sd_setup_discard_cmnd(sdp, rq); goto out; } else if (rq->cmd_flags & REQ_FLUSH) { ret = scsi_setup_flush_cmnd(sdp, rq); @@ -1482,12 +1480,20 @@ static int sd_done(struct scsi_cmnd *SCpnt) unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt); struct scsi_sense_hdr sshdr; struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk); + struct request *req = SCpnt->request; int sense_valid = 0; int sense_deferred = 0; unsigned char op = SCpnt->cmnd[0]; - if ((SCpnt->request->cmd_flags & REQ_DISCARD) && !result) - scsi_set_resid(SCpnt, 0); + if (req->cmd_flags & REQ_DISCARD) { + if (!result) { + good_bytes = blk_rq_bytes(req); + scsi_set_resid(SCpnt, 0); + } else { + good_bytes = 0; + scsi_set_resid(SCpnt, blk_rq_bytes(req)); + } + } if (result) { sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr); -- cgit v1.2.3 From 5db44863b6ebbb400c5e61d56ebe8f21ef48b1bd Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Tue, 18 Sep 2012 12:19:32 -0400 Subject: [SCSI] sd: Implement support for WRITE SAME Implement support for WRITE SAME(10) and WRITE SAME(16) in the SCSI disk driver. - We set the default maximum to 0xFFFF because there are several devices out there that only support two-byte block counts even with WRITE SAME(16). We only enable transfers bigger than 0xFFFF if the device explicitly reports MAXIMUM WRITE SAME LENGTH in the BLOCK LIMITS VPD. - max_write_same_blocks can be overriden per-device basis in sysfs. - The UNMAP discovery heuristics remain unchanged but the discard limits are tweaked to match the "real" WRITE SAME commands. - In the error handling logic we now distinguish between WRITE SAME with and without UNMAP set. The discovery process heuristics are: - If the device reports a SCSI level of SPC-3 or greater we'll issue READ SUPPORTED OPERATION CODES to find out whether WRITE SAME(16) is supported. If that's the case we will use it. - If the device supports the block limits VPD and reports a MAXIMUM WRITE SAME LENGTH bigger than 0xFFFF we will use WRITE SAME(16). - Otherwise we will use WRITE SAME(10) unless the target LBA is beyond 0xFFFFFFFF or the block count exceeds 0xFFFF. - no_write_same is set for ATA, FireWire and USB. Signed-off-by: Martin K. Petersen Reviewed-by: Mike Snitzer Reviewed-by: Jeff Garzik Signed-off-by: James Bottomley --- drivers/ata/libata-scsi.c | 1 + drivers/firewire/sbp2.c | 1 + drivers/scsi/scsi_lib.c | 22 ++++-- drivers/scsi/sd.c | 172 ++++++++++++++++++++++++++++++++++++++--- drivers/scsi/sd.h | 7 ++ drivers/usb/storage/scsiglue.c | 3 + 6 files changed, 190 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 7c2dead60518..a6df6a351d6e 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1053,6 +1053,7 @@ static void ata_scsi_sdev_config(struct scsi_device *sdev) sdev->use_10_for_rw = 1; sdev->use_10_for_ms = 1; sdev->no_report_opcodes = 1; + sdev->no_write_same = 1; /* Schedule policy is determined by ->qc_defer() callback and * it needs to see every deferred qc. Set dev_blocked to 1 to diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c index f82e9d4295d0..bb1b392f5cda 100644 --- a/drivers/firewire/sbp2.c +++ b/drivers/firewire/sbp2.c @@ -1547,6 +1547,7 @@ static int sbp2_scsi_slave_configure(struct scsi_device *sdev) sdev->use_10_for_rw = 1; sdev->no_report_opcodes = 1; + sdev->no_write_same = 1; if (sbp2_param_exclusive_login) sdev->manage_start_stop = 1; diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index da36a3a81a9e..9032e910bca3 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -900,11 +900,23 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) action = ACTION_FAIL; error = -EILSEQ; /* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */ - } else if ((sshdr.asc == 0x20 || sshdr.asc == 0x24) && - (cmd->cmnd[0] == UNMAP || - cmd->cmnd[0] == WRITE_SAME_16 || - cmd->cmnd[0] == WRITE_SAME)) { - description = "Discard failure"; + } else if (sshdr.asc == 0x20 || sshdr.asc == 0x24) { + switch (cmd->cmnd[0]) { + case UNMAP: + description = "Discard failure"; + break; + case WRITE_SAME: + case WRITE_SAME_16: + if (cmd->cmnd[1] & 0x8) + description = "Discard failure"; + else + description = + "Write same failure"; + break; + default: + description = "Invalid command failure"; + break; + } action = ACTION_FAIL; error = -EREMOTEIO; } else diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index c6af4c1a9ca3..352bc77b7c88 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -99,6 +99,7 @@ MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC); #endif static void sd_config_discard(struct scsi_disk *, unsigned int); +static void sd_config_write_same(struct scsi_disk *); static int sd_revalidate_disk(struct gendisk *); static void sd_unlock_native_capacity(struct gendisk *disk); static int sd_probe(struct device *); @@ -395,6 +396,45 @@ sd_store_max_medium_access_timeouts(struct device *dev, return err ? err : count; } +static ssize_t +sd_show_write_same_blocks(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct scsi_disk *sdkp = to_scsi_disk(dev); + + return snprintf(buf, 20, "%u\n", sdkp->max_ws_blocks); +} + +static ssize_t +sd_store_write_same_blocks(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct scsi_disk *sdkp = to_scsi_disk(dev); + struct scsi_device *sdp = sdkp->device; + unsigned long max; + int err; + + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + + if (sdp->type != TYPE_DISK) + return -EINVAL; + + err = kstrtoul(buf, 10, &max); + + if (err) + return err; + + if (max == 0) + sdp->no_write_same = 1; + else if (max <= SD_MAX_WS16_BLOCKS) + sdkp->max_ws_blocks = max; + + sd_config_write_same(sdkp); + + return count; +} + static struct device_attribute sd_disk_attrs[] = { __ATTR(cache_type, S_IRUGO|S_IWUSR, sd_show_cache_type, sd_store_cache_type), @@ -410,6 +450,8 @@ static struct device_attribute sd_disk_attrs[] = { __ATTR(thin_provisioning, S_IRUGO, sd_show_thin_provisioning, NULL), __ATTR(provisioning_mode, S_IRUGO|S_IWUSR, sd_show_provisioning_mode, sd_store_provisioning_mode), + __ATTR(max_write_same_blocks, S_IRUGO|S_IWUSR, + sd_show_write_same_blocks, sd_store_write_same_blocks), __ATTR(max_medium_access_timeouts, S_IRUGO|S_IWUSR, sd_show_max_medium_access_timeouts, sd_store_max_medium_access_timeouts), @@ -561,19 +603,23 @@ static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode) return; case SD_LBP_UNMAP: - max_blocks = min_not_zero(sdkp->max_unmap_blocks, 0xffffffff); + max_blocks = min_not_zero(sdkp->max_unmap_blocks, + (u32)SD_MAX_WS16_BLOCKS); break; case SD_LBP_WS16: - max_blocks = min_not_zero(sdkp->max_ws_blocks, 0xffffffff); + max_blocks = min_not_zero(sdkp->max_ws_blocks, + (u32)SD_MAX_WS16_BLOCKS); break; case SD_LBP_WS10: - max_blocks = min_not_zero(sdkp->max_ws_blocks, (u32)0xffff); + max_blocks = min_not_zero(sdkp->max_ws_blocks, + (u32)SD_MAX_WS10_BLOCKS); break; case SD_LBP_ZERO: - max_blocks = min_not_zero(sdkp->max_ws_blocks, (u32)0xffff); + max_blocks = min_not_zero(sdkp->max_ws_blocks, + (u32)SD_MAX_WS10_BLOCKS); q->limits.discard_zeroes_data = 1; break; } @@ -667,6 +713,83 @@ out: return ret; } +static void sd_config_write_same(struct scsi_disk *sdkp) +{ + struct request_queue *q = sdkp->disk->queue; + unsigned int logical_block_size = sdkp->device->sector_size; + unsigned int blocks = 0; + + if (sdkp->device->no_write_same) { + sdkp->max_ws_blocks = 0; + goto out; + } + + /* Some devices can not handle block counts above 0xffff despite + * supporting WRITE SAME(16). Consequently we default to 64k + * blocks per I/O unless the device explicitly advertises a + * bigger limit. + */ + if (sdkp->max_ws_blocks == 0) + sdkp->max_ws_blocks = SD_MAX_WS10_BLOCKS; + + if (sdkp->ws16 || sdkp->max_ws_blocks > SD_MAX_WS10_BLOCKS) + blocks = min_not_zero(sdkp->max_ws_blocks, + (u32)SD_MAX_WS16_BLOCKS); + else + blocks = min_not_zero(sdkp->max_ws_blocks, + (u32)SD_MAX_WS10_BLOCKS); + +out: + blk_queue_max_write_same_sectors(q, blocks * (logical_block_size >> 9)); +} + +/** + * sd_setup_write_same_cmnd - write the same data to multiple blocks + * @sdp: scsi device to operate one + * @rq: Request to prepare + * + * Will issue either WRITE SAME(10) or WRITE SAME(16) depending on + * preference indicated by target device. + **/ +static int sd_setup_write_same_cmnd(struct scsi_device *sdp, struct request *rq) +{ + struct scsi_disk *sdkp = scsi_disk(rq->rq_disk); + struct bio *bio = rq->bio; + sector_t sector = blk_rq_pos(rq); + unsigned int nr_sectors = blk_rq_sectors(rq); + unsigned int nr_bytes = blk_rq_bytes(rq); + int ret; + + if (sdkp->device->no_write_same) + return BLKPREP_KILL; + + BUG_ON(bio_offset(bio) || bio_iovec(bio)->bv_len != sdp->sector_size); + + sector >>= ilog2(sdp->sector_size) - 9; + nr_sectors >>= ilog2(sdp->sector_size) - 9; + + rq->__data_len = sdp->sector_size; + rq->timeout = SD_WRITE_SAME_TIMEOUT; + memset(rq->cmd, 0, rq->cmd_len); + + if (sdkp->ws16 || sector > 0xffffffff || nr_sectors > 0xffff) { + rq->cmd_len = 16; + rq->cmd[0] = WRITE_SAME_16; + put_unaligned_be64(sector, &rq->cmd[2]); + put_unaligned_be32(nr_sectors, &rq->cmd[10]); + } else { + rq->cmd_len = 10; + rq->cmd[0] = WRITE_SAME; + put_unaligned_be32(sector, &rq->cmd[2]); + put_unaligned_be16(nr_sectors, &rq->cmd[7]); + } + + ret = scsi_setup_blk_pc_cmnd(sdp, rq); + rq->__data_len = nr_bytes; + + return ret; +} + static int scsi_setup_flush_cmnd(struct scsi_device *sdp, struct request *rq) { rq->timeout = SD_FLUSH_TIMEOUT; @@ -712,6 +835,9 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) if (rq->cmd_flags & REQ_DISCARD) { ret = sd_setup_discard_cmnd(sdp, rq); goto out; + } else if (rq->cmd_flags & REQ_WRITE_SAME) { + ret = sd_setup_write_same_cmnd(sdp, rq); + goto out; } else if (rq->cmd_flags & REQ_FLUSH) { ret = scsi_setup_flush_cmnd(sdp, rq); goto out; @@ -1484,8 +1610,9 @@ static int sd_done(struct scsi_cmnd *SCpnt) int sense_valid = 0; int sense_deferred = 0; unsigned char op = SCpnt->cmnd[0]; + unsigned char unmap = SCpnt->cmnd[1] & 8; - if (req->cmd_flags & REQ_DISCARD) { + if (req->cmd_flags & REQ_DISCARD || req->cmd_flags & REQ_WRITE_SAME) { if (!result) { good_bytes = blk_rq_bytes(req); scsi_set_resid(SCpnt, 0); @@ -1542,9 +1669,25 @@ static int sd_done(struct scsi_cmnd *SCpnt) if (sshdr.asc == 0x10) /* DIX: Host detected corruption */ good_bytes = sd_completed_bytes(SCpnt); /* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */ - if ((sshdr.asc == 0x20 || sshdr.asc == 0x24) && - (op == UNMAP || op == WRITE_SAME_16 || op == WRITE_SAME)) - sd_config_discard(sdkp, SD_LBP_DISABLE); + if (sshdr.asc == 0x20 || sshdr.asc == 0x24) { + switch (op) { + case UNMAP: + sd_config_discard(sdkp, SD_LBP_DISABLE); + break; + case WRITE_SAME_16: + case WRITE_SAME: + if (unmap) + sd_config_discard(sdkp, SD_LBP_DISABLE); + else { + sdkp->device->no_write_same = 1; + sd_config_write_same(sdkp); + + good_bytes = 0; + req->__data_len = blk_rq_bytes(req); + req->cmd_flags |= REQ_QUIET; + } + } + } break; default: break; @@ -2380,9 +2523,7 @@ static void sd_read_block_limits(struct scsi_disk *sdkp) if (buffer[3] == 0x3c) { unsigned int lba_count, desc_count; - sdkp->max_ws_blocks = - (u32) min_not_zero(get_unaligned_be64(&buffer[36]), - (u64)0xffffffff); + sdkp->max_ws_blocks = (u32)get_unaligned_be64(&buffer[36]); if (!sdkp->lbpme) goto out; @@ -2475,6 +2616,13 @@ static void sd_read_block_provisioning(struct scsi_disk *sdkp) kfree(buffer); } +static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer) +{ + if (scsi_report_opcode(sdkp->device, buffer, SD_BUF_SIZE, + WRITE_SAME_16)) + sdkp->ws16 = 1; +} + static int sd_try_extended_inquiry(struct scsi_device *sdp) { /* @@ -2534,6 +2682,7 @@ static int sd_revalidate_disk(struct gendisk *disk) sd_read_write_protect_flag(sdkp, buffer); sd_read_cache_type(sdkp, buffer); sd_read_app_tag_own(sdkp, buffer); + sd_read_write_same(sdkp, buffer); } sdkp->first_scan = 0; @@ -2551,6 +2700,7 @@ static int sd_revalidate_disk(struct gendisk *disk) blk_queue_flush(sdkp->disk->queue, flush); set_capacity(disk, sdkp->capacity); + sd_config_write_same(sdkp); kfree(buffer); out: diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index 47c52a6d733c..74a1e4ca5401 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -14,6 +14,7 @@ #define SD_TIMEOUT (30 * HZ) #define SD_MOD_TIMEOUT (75 * HZ) #define SD_FLUSH_TIMEOUT (60 * HZ) +#define SD_WRITE_SAME_TIMEOUT (120 * HZ) /* * Number of allowed retries @@ -38,6 +39,11 @@ enum { SD_MEMPOOL_SIZE = 2, /* CDB pool size */ }; +enum { + SD_MAX_WS10_BLOCKS = 0xffff, + SD_MAX_WS16_BLOCKS = 0x7fffff, +}; + enum { SD_LBP_FULL = 0, /* Full logical block provisioning */ SD_LBP_UNMAP, /* Use UNMAP command */ @@ -77,6 +83,7 @@ struct scsi_disk { unsigned lbpws : 1; unsigned lbpws10 : 1; unsigned lbpvpd : 1; + unsigned ws16 : 1; }; #define to_scsi_disk(obj) container_of(obj,struct scsi_disk,dev) diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 6ab376a7c501..92f35abee92d 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -189,6 +189,9 @@ static int slave_configure(struct scsi_device *sdev) /* Do not attempt to use REPORT SUPPORTED OPERATION CODES */ sdev->no_report_opcodes = 1; + /* Do not attempt to use WRITE SAME */ + sdev->no_write_same = 1; + /* Some disks return the total number of blocks in response * to READ CAPACITY rather than the highest block number. * If this device makes that mistake, tell the sd driver. */ -- cgit v1.2.3 From 0d852fe4d27fa82de9fdcbda9a5ac634800b1fd1 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Tue, 13 Nov 2012 16:43:21 +0100 Subject: i2c: at91: fix SMBus quick command The driver claims to support SMBus quick command but it was not the case. This patch fixes this issue. Without it, i2cdetect finds imaginary devices. And with some IP versions, trying to send 0 byte can cause issue when writing data to an EEPROM. Signed-off-by: Ludovic Desroches Acked-by: Jean-Christophe PLAGNIOL-VILLARD [wsa: improved the commit message] Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-at91.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index aa59a254be2c..c02bf208084f 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -39,6 +39,7 @@ #define AT91_TWI_STOP 0x0002 /* Send a Stop Condition */ #define AT91_TWI_MSEN 0x0004 /* Master Transfer Enable */ #define AT91_TWI_SVDIS 0x0020 /* Slave Transfer Disable */ +#define AT91_TWI_QUICK 0x0040 /* SMBus quick command */ #define AT91_TWI_SWRST 0x0080 /* Software Reset */ #define AT91_TWI_MMR 0x0004 /* Master Mode Register */ @@ -212,7 +213,11 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev) INIT_COMPLETION(dev->cmd_complete); dev->transfer_status = 0; - if (dev->msg->flags & I2C_M_RD) { + + if (!dev->buf_len) { + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_QUICK); + at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP); + } else if (dev->msg->flags & I2C_M_RD) { unsigned start_flags = AT91_TWI_START; if (at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_RXRDY) { -- cgit v1.2.3 From 23ff2f0f6128b4c310fbb274dbb91cc2f9b6ab06 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 14 Nov 2012 09:39:31 +0000 Subject: regulator: core: Avoid deadlock when regulator_register fails When regulator_register fails and exits through the scrub path the regulator_put function was called whilst holding the regulator_list_mutex, causing deadlock. This patch adds a private version of the regulator_put function which can be safely called whilst holding the mutex, replacing the aforementioned call. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- drivers/regulator/core.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 5c4829cba6a6..3ebc06b280ab 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1381,22 +1381,14 @@ struct regulator *regulator_get_exclusive(struct device *dev, const char *id) } EXPORT_SYMBOL_GPL(regulator_get_exclusive); -/** - * regulator_put - "free" the regulator source - * @regulator: regulator source - * - * Note: drivers must ensure that all regulator_enable calls made on this - * regulator source are balanced by regulator_disable calls prior to calling - * this function. - */ -void regulator_put(struct regulator *regulator) +/* Locks held by regulator_put() */ +static void _regulator_put(struct regulator *regulator) { struct regulator_dev *rdev; if (regulator == NULL || IS_ERR(regulator)) return; - mutex_lock(®ulator_list_mutex); rdev = regulator->rdev; debugfs_remove_recursive(regulator->debugfs); @@ -1412,6 +1404,20 @@ void regulator_put(struct regulator *regulator) rdev->exclusive = 0; module_put(rdev->owner); +} + +/** + * regulator_put - "free" the regulator source + * @regulator: regulator source + * + * Note: drivers must ensure that all regulator_enable calls made on this + * regulator source are balanced by regulator_disable calls prior to calling + * this function. + */ +void regulator_put(struct regulator *regulator) +{ + mutex_lock(®ulator_list_mutex); + _regulator_put(regulator); mutex_unlock(®ulator_list_mutex); } EXPORT_SYMBOL_GPL(regulator_put); @@ -3445,7 +3451,7 @@ unset_supplies: scrub: if (rdev->supply) - regulator_put(rdev->supply); + _regulator_put(rdev->supply); if (rdev->ena_gpio) gpio_free(rdev->ena_gpio); kfree(rdev->constraints); -- cgit v1.2.3 From 04baaa27b43d389879237b32f8bd194a94cf1ca7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 13 Nov 2012 21:28:44 +0100 Subject: iwlwifi: fix monitor mode FCS flag When the firmware is in SNIFFER mode, it leaves the FCS at the end of frame. Not telling mac80211 means it won't add the right flag to the radiotap header and that confuses wireshark. Since mac80211 doesn't have a per-packet flag, set the HW flag dynamically. This works as the monitor vif can only be present in the driver by itself. This fixes a regression introduced by my commit 578977264199de9815ace51ade87cec4894cf010 Author: Johannes Berg Date: Fri May 11 10:53:18 2012 +0200 iwlwifi: support explicit monitor interface Cc: stable@vger.kernel.org [3.5+] Reported-by: MARK PHILLIPS Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/mac80211.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index fa4d1b8cd9f6..2d9eee93c743 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -1354,6 +1354,20 @@ static int iwlagn_mac_add_interface(struct ieee80211_hw *hw, vif_priv->ctx = ctx; ctx->vif = vif; + /* + * In SNIFFER device type, the firmware reports the FCS to + * the host, rather than snipping it off. Unfortunately, + * mac80211 doesn't (yet) provide a per-packet flag for + * this, so that we have to set the hardware flag based + * on the interfaces added. As the monitor interface can + * only be present by itself, and will be removed before + * other interfaces are added, this is safe. + */ + if (vif->type == NL80211_IFTYPE_MONITOR) + priv->hw->flags |= IEEE80211_HW_RX_INCLUDES_FCS; + else + priv->hw->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS; + err = iwl_setup_interface(priv, ctx); if (!err || reset) goto out; -- cgit v1.2.3 From 9aadd70aed60b47e367e7a1a6b9068daba04fe05 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 6 Nov 2012 16:31:32 +0000 Subject: Revert "ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints" This reverts commit 3db11feffc1ad2ab9dea27789e6b5b3032827adc (ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints). This commit causes I2C timeouts to appear on several OMAP3430/3530-based boards: http://marc.info/?l=linux-arm-kernel&m=135071372426971&w=2 http://marc.info/?l=linux-arm-kernel&m=135067558415214&w=2 http://marc.info/?l=linux-arm-kernel&m=135216013608196&w=2 and appears to have been sent for merging before one of its prerequisites was merged: http://marc.info/?l=linux-arm-kernel&m=135219411617621&w=2 Signed-off-by: Paul Walmsley Acked-by: Jean Pihet Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-omap.c | 32 ++++++++++++++------------------ 1 file changed, 14 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index db31eaed6ea5..0b0254312d21 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -43,7 +43,6 @@ #include #include #include -#include /* I2C controller revisions */ #define OMAP_I2C_OMAP1_REV_2 0x20 @@ -187,8 +186,9 @@ struct omap_i2c_dev { int reg_shift; /* bit shift for I2C register addresses */ struct completion cmd_complete; struct resource *ioarea; - u32 latency; /* maximum MPU wkup latency */ - struct pm_qos_request pm_qos_request; + u32 latency; /* maximum mpu wkup latency */ + void (*set_mpu_wkup_lat)(struct device *dev, + long latency); u32 speed; /* Speed of bus in kHz */ u32 dtrev; /* extra revision from DT */ u32 flags; @@ -494,7 +494,9 @@ static void omap_i2c_resize_fifo(struct omap_i2c_dev *dev, u8 size, bool is_rx) dev->b_hw = 1; /* Enable hardware fixes */ /* calculate wakeup latency constraint for MPU */ - dev->latency = (1000000 * dev->threshold) / (1000 * dev->speed / 8); + if (dev->set_mpu_wkup_lat != NULL) + dev->latency = (1000000 * dev->threshold) / + (1000 * dev->speed / 8); } /* @@ -629,16 +631,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) if (r < 0) goto out; - /* - * When waiting for completion of a i2c transfer, we need to - * set a wake up latency constraint for the MPU. This is to - * ensure quick enough wakeup from idle, when transfer - * completes. - */ - if (dev->latency) - pm_qos_add_request(&dev->pm_qos_request, - PM_QOS_CPU_DMA_LATENCY, - dev->latency); + if (dev->set_mpu_wkup_lat != NULL) + dev->set_mpu_wkup_lat(dev->dev, dev->latency); for (i = 0; i < num; i++) { r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1))); @@ -646,8 +640,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) break; } - if (dev->latency) - pm_qos_remove_request(&dev->pm_qos_request); + if (dev->set_mpu_wkup_lat != NULL) + dev->set_mpu_wkup_lat(dev->dev, -1); if (r == 0) r = num; @@ -1104,6 +1098,7 @@ omap_i2c_probe(struct platform_device *pdev) } else if (pdata != NULL) { dev->speed = pdata->clkrate; dev->flags = pdata->flags; + dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat; dev->dtrev = pdata->rev; } @@ -1159,8 +1154,9 @@ omap_i2c_probe(struct platform_device *pdev) dev->b_hw = 1; /* Enable hardware fixes */ /* calculate wakeup latency constraint for MPU */ - dev->latency = (1000000 * dev->fifo_size) / - (1000 * dev->speed / 8); + if (dev->set_mpu_wkup_lat != NULL) + dev->latency = (1000000 * dev->fifo_size) / + (1000 * dev->speed / 8); } /* reset ASAP, clearing any IRQs */ -- cgit v1.2.3 From aedc256dd032fe9b0691fdd0f67b5e65e3e7bc0d Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 14 Nov 2012 16:22:45 +0200 Subject: i2c: omap: ensure writes to dev->buf_len are ordered if we allow compiler reorder our writes, we could fall into a situation where dev->buf_len is reset for no apparent reason. This bug was found with a simple script which would transfer data to an i2c client from 1 to 1024 bytes (a simple for loop), when we got to transfer sizes bigger than the fifo size, dev->buf_len was reset to zero before we had an oportunity to handle XDR Interrupt. Because dev->buf_len was zero, we entered omap_i2c_transmit_data() to transfer zero bytes, which would mean we would just silently exit omap_i2c_transmit_data() without actually writing anything to DATA register. That would cause XDR IRQ to trigger forever and we would never transfer the remaining bytes. After adding the memory barrier, we also drop resetting dev->buf_len to zero in omap_i2c_xfer_msg() because both omap_i2c_transmit_data() and omap_i2c_receive_data() will act until dev->buf_len reaches zero, rendering the other write in omap_i2c_xfer_msg() redundant. This patch has been tested with pandaboard for a few iterations of the script mentioned above. Signed-off-by: Felipe Balbi Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-omap.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 0b0254312d21..3525c9e62cb0 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -524,6 +524,9 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, dev->buf = msg->buf; dev->buf_len = msg->len; + /* make sure writes to dev->buf_len are ordered */ + barrier(); + omap_i2c_write_reg(dev, OMAP_I2C_CNT_REG, dev->buf_len); /* Clear the FIFO Buffers */ @@ -581,7 +584,6 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, */ timeout = wait_for_completion_timeout(&dev->cmd_complete, OMAP_I2C_TIMEOUT); - dev->buf_len = 0; if (timeout == 0) { dev_err(dev->dev, "controller timed out\n"); omap_i2c_init(dev); -- cgit v1.2.3 From d61f978b8f26d2392c88249f877e46e2c2b5561d Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sun, 4 Nov 2012 23:13:09 +0100 Subject: brcmfmac: fix typo in CONFIG_BRCMISCAN The old ifdef CONFIG_BRCMFISCAN looks wrong to me and it makes more sense when CONFIG_BRCMISCAN is used. This patch was just compile tested by me, but not runtime tested. Signed-off-by: Hauke Mehrtens Acked-by: Franky Lin Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index a6f1e8166008..481345c23ded 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4401,7 +4401,7 @@ static s32 brcmf_mode_to_nl80211_iftype(s32 mode) static void brcmf_wiphy_pno_params(struct wiphy *wiphy) { -#ifndef CONFIG_BRCMFISCAN +#ifndef CONFIG_BRCMISCAN /* scheduled scan settings */ wiphy->max_sched_scan_ssids = BRCMF_PNO_MAX_PFN_COUNT; wiphy->max_match_sets = BRCMF_PNO_MAX_PFN_COUNT; -- cgit v1.2.3 From c019bc119a97aa20372c5a2cf210d209380d397d Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 14 Nov 2012 19:15:47 +1100 Subject: TTY: hvc_console, fix port reference count going to zero prematurely Commit bdb498c20040 "TTY: hvc_console, add tty install" took the port refcounting out of hvc_open()/hvc_close(), but failed to remove the kref_put() and tty_kref_put() calls in hvc_hangup() that were there to remove the extra references that hvc_open() had taken. The result was that doing a vhangup() when the current terminal was a hvc_console, then closing the current terminal, would end up calling destroy_hvc_struct() and making the port disappear entirely. This meant that Fedora 17 systems would boot up but then not display the login prompt on the console, and attempts to open /dev/hvc0 would give a "No such device" error. This fixes it by removing the extra kref_put() and tty_kref_put() calls. Signed-off-by: Paul Mackerras Acked-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- drivers/tty/hvc/hvc_console.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c index a5dec1ca1b82..13ee53bd0bf6 100644 --- a/drivers/tty/hvc/hvc_console.c +++ b/drivers/tty/hvc/hvc_console.c @@ -424,7 +424,6 @@ static void hvc_hangup(struct tty_struct *tty) { struct hvc_struct *hp = tty->driver_data; unsigned long flags; - int temp_open_count; if (!hp) return; @@ -444,7 +443,6 @@ static void hvc_hangup(struct tty_struct *tty) return; } - temp_open_count = hp->port.count; hp->port.count = 0; spin_unlock_irqrestore(&hp->port.lock, flags); tty_port_tty_set(&hp->port, NULL); @@ -453,11 +451,6 @@ static void hvc_hangup(struct tty_struct *tty) if (hp->ops->notifier_hangup) hp->ops->notifier_hangup(hp, hp->data); - - while(temp_open_count) { - --temp_open_count; - tty_port_put(&hp->port); - } } /* -- cgit v1.2.3 From 1838b8c487378c6c576029d9e0e07b5a73036bac Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 4 Nov 2012 23:34:18 +0800 Subject: tty: serial: max310x: Add terminating entry for spi_device_id table The spi_device_id table is supposed to be zero-terminated. Signed-off-by: Axel Lin Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/max310x.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 2bc28a59d385..1ab1d2c66de4 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1239,6 +1239,7 @@ static int __devexit max310x_remove(struct spi_device *spi) static const struct spi_device_id max310x_id_table[] = { { "max3107", MAX310X_TYPE_MAX3107 }, { "max3108", MAX310X_TYPE_MAX3108 }, + { } }; MODULE_DEVICE_TABLE(spi, max310x_id_table); -- cgit v1.2.3 From f0f98b19e23d4426ca185e3d4ca80e6aff5ef51b Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Tue, 13 Nov 2012 09:48:51 +0100 Subject: regulator: fix voltage check in regulator_is_supported_voltage() regulator_is_supported_voltage() should return true only if the voltage of fixed/constant regulator is between min_uV and max_uV. Signed-off-by: Marek Szyprowski Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/regulator/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 5c4829cba6a6..27eb9d66f06a 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1974,7 +1974,7 @@ int regulator_is_supported_voltage(struct regulator *regulator, if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) { ret = regulator_get_voltage(regulator); if (ret >= 0) - return (min_uV >= ret && ret <= max_uV); + return (min_uV <= ret && ret <= max_uV); else return ret; } -- cgit v1.2.3 From 71c6c837a0fe9d291e0764503f09dac0fec59ce1 Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Tue, 13 Nov 2012 19:47:36 +0000 Subject: drivers/net: fix tasklet misuse issue In commit 175c0dff, drivers uses tasklet_kill to avoid put disabled tasklet on the tasklet vec. But some of the drivers uses tasklet_init & tasklet_disable in the driver init code, then tasklet_enable when it is opened. This makes tasklet_enable on a killed tasklet and make ksoftirqd crazy then. Normally, drivers should use tasklet_init/tasklet_kill on device open/remove, and use tasklet_disable/tasklet_enable on device suspend/resume. Reported-by: Peter Wu Tested-by: Peter Wu Signed-off-by: Xiaotian Feng Cc: "David S. Miller" Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/ethernet/jme.c | 28 +++++++---------------- drivers/net/ethernet/micrel/ksz884x.c | 16 ++++--------- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 12 +++++----- 3 files changed, 18 insertions(+), 38 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c index 92317e9c0f73..60ac46f4ac08 100644 --- a/drivers/net/ethernet/jme.c +++ b/drivers/net/ethernet/jme.c @@ -1860,10 +1860,14 @@ jme_open(struct net_device *netdev) jme_clear_pm(jme); JME_NAPI_ENABLE(jme); - tasklet_enable(&jme->linkch_task); - tasklet_enable(&jme->txclean_task); - tasklet_hi_enable(&jme->rxclean_task); - tasklet_hi_enable(&jme->rxempty_task); + tasklet_init(&jme->linkch_task, jme_link_change_tasklet, + (unsigned long) jme); + tasklet_init(&jme->txclean_task, jme_tx_clean_tasklet, + (unsigned long) jme); + tasklet_init(&jme->rxclean_task, jme_rx_clean_tasklet, + (unsigned long) jme); + tasklet_init(&jme->rxempty_task, jme_rx_empty_tasklet, + (unsigned long) jme); rc = jme_request_irq(jme); if (rc) @@ -3079,22 +3083,6 @@ jme_init_one(struct pci_dev *pdev, tasklet_init(&jme->pcc_task, jme_pcc_tasklet, (unsigned long) jme); - tasklet_init(&jme->linkch_task, - jme_link_change_tasklet, - (unsigned long) jme); - tasklet_init(&jme->txclean_task, - jme_tx_clean_tasklet, - (unsigned long) jme); - tasklet_init(&jme->rxclean_task, - jme_rx_clean_tasklet, - (unsigned long) jme); - tasklet_init(&jme->rxempty_task, - jme_rx_empty_tasklet, - (unsigned long) jme); - tasklet_disable_nosync(&jme->linkch_task); - tasklet_disable_nosync(&jme->txclean_task); - tasklet_disable_nosync(&jme->rxclean_task); - tasklet_disable_nosync(&jme->rxempty_task); jme->dpi.cur = PCC_P1; jme->reg_ghc = 0; diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c index e558edd1cb6c..69e01977a1dd 100644 --- a/drivers/net/ethernet/micrel/ksz884x.c +++ b/drivers/net/ethernet/micrel/ksz884x.c @@ -5459,8 +5459,10 @@ static int prepare_hardware(struct net_device *dev) rc = request_irq(dev->irq, netdev_intr, IRQF_SHARED, dev->name, dev); if (rc) return rc; - tasklet_enable(&hw_priv->rx_tasklet); - tasklet_enable(&hw_priv->tx_tasklet); + tasklet_init(&hw_priv->rx_tasklet, rx_proc_task, + (unsigned long) hw_priv); + tasklet_init(&hw_priv->tx_tasklet, tx_proc_task, + (unsigned long) hw_priv); hw->promiscuous = 0; hw->all_multi = 0; @@ -7033,16 +7035,6 @@ static int __devinit pcidev_init(struct pci_dev *pdev, spin_lock_init(&hw_priv->hwlock); mutex_init(&hw_priv->lock); - /* tasklet is enabled. */ - tasklet_init(&hw_priv->rx_tasklet, rx_proc_task, - (unsigned long) hw_priv); - tasklet_init(&hw_priv->tx_tasklet, tx_proc_task, - (unsigned long) hw_priv); - - /* tasklet_enable will decrement the atomic counter. */ - tasklet_disable(&hw_priv->rx_tasklet); - tasklet_disable(&hw_priv->tx_tasklet); - for (i = 0; i < TOTAL_PORT_NUM; i++) init_waitqueue_head(&hw_priv->counter[i].counter); diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 1d04754a6637..77e6db9dcfed 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -942,6 +942,10 @@ static int axienet_open(struct net_device *ndev) phy_start(lp->phy_dev); } + /* Enable tasklets for Axi DMA error handling */ + tasklet_init(&lp->dma_err_tasklet, axienet_dma_err_handler, + (unsigned long) lp); + /* Enable interrupts for Axi DMA Tx */ ret = request_irq(lp->tx_irq, axienet_tx_irq, 0, ndev->name, ndev); if (ret) @@ -950,8 +954,7 @@ static int axienet_open(struct net_device *ndev) ret = request_irq(lp->rx_irq, axienet_rx_irq, 0, ndev->name, ndev); if (ret) goto err_rx_irq; - /* Enable tasklets for Axi DMA error handling */ - tasklet_enable(&lp->dma_err_tasklet); + return 0; err_rx_irq: @@ -960,6 +963,7 @@ err_tx_irq: if (lp->phy_dev) phy_disconnect(lp->phy_dev); lp->phy_dev = NULL; + tasklet_kill(&lp->dma_err_tasklet); dev_err(lp->dev, "request_irq() failed\n"); return ret; } @@ -1613,10 +1617,6 @@ static int __devinit axienet_of_probe(struct platform_device *op) goto err_iounmap_2; } - tasklet_init(&lp->dma_err_tasklet, axienet_dma_err_handler, - (unsigned long) lp); - tasklet_disable(&lp->dma_err_tasklet); - return 0; err_iounmap_2: -- cgit v1.2.3 From 769ce4c95e8f77c1d5df82194e54df49d28830c5 Mon Sep 17 00:00:00 2001 From: Kamlakant Patel Date: Wed, 14 Nov 2012 01:41:38 +0000 Subject: net/smsc911x: Fix ready check in cases where WORD_SWAP is needed The chip ready check added by the commit 3ac3546e [Always wait for the chip to be ready] does not work when the register read/write is word swapped. This check has been added before the WORD_SWAP register is programmed, so we need to check for swapped register value as well. Bit 16 is marked as RESERVED in SMSC datasheet, Steve Glendinning checked with SMSC and wrote: The chip architects have concluded we should be reading PMT_CTRL until we see any of bits 0, 8, 16 or 24 set. Then we should read BYTE_TEST to check the byte order is correct (as we already do). The rationale behind this is that some of the chip variants have word order swapping features too, so the READY bit could actually be in any of the 4 possible locations. The architects have confirmed that if any of these 4 positions is set the chip is ready. The other 3 locations will either never be set or can only go high after READY does (so also indicate the device is ready). This change will check for the READY bit at the 16th position. We do not check the other two cases (bit 8 and 24) since the driver does not support byte-swapped register read/write. Signed-off-by: Kamlakant Patel Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smsc911x.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 62d1baf111ea..c53c0f4e2ce3 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -2110,7 +2110,7 @@ static void __devinit smsc911x_read_mac_address(struct net_device *dev) static int __devinit smsc911x_init(struct net_device *dev) { struct smsc911x_data *pdata = netdev_priv(dev); - unsigned int byte_test; + unsigned int byte_test, mask; unsigned int to = 100; SMSC_TRACE(pdata, probe, "Driver Parameters:"); @@ -2130,9 +2130,22 @@ static int __devinit smsc911x_init(struct net_device *dev) /* * poll the READY bit in PMT_CTRL. Any other access to the device is * forbidden while this bit isn't set. Try for 100ms + * + * Note that this test is done before the WORD_SWAP register is + * programmed. So in some configurations the READY bit is at 16 before + * WORD_SWAP is written to. This issue is worked around by waiting + * until either bit 0 or bit 16 gets set in PMT_CTRL. + * + * SMSC has confirmed that checking bit 16 (marked as reserved in + * the datasheet) is fine since these bits "will either never be set + * or can only go high after READY does (so also indicate the device + * is ready)". */ - while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to) + + mask = PMT_CTRL_READY_ | swahw32(PMT_CTRL_READY_); + while (!(smsc911x_reg_read(pdata, PMT_CTRL) & mask) && --to) udelay(1000); + if (to == 0) { pr_err("Device not READY in 100ms aborting\n"); return -ENODEV; -- cgit v1.2.3 From 80d11788fb8f4d9fcfae5ad508c7f1b65e8b28a3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 14 Nov 2012 22:32:15 -0500 Subject: Revert "drivers/net/phy/mdio-bitbang.c: Call mdiobus_unregister before mdiobus_free" This reverts commit aa731872f7d33dcb8b54dad0cfb82d4e4d195d7e. As pointed out by Ben Hutchings, this change is not correct. mdiobus_unregister() can't be called if the bus isn't registered yet, however this change can result in situations which cause that to happen. Part of the confusion here revolves around the fact that the callers of this module control registration/unregistration, rather than the module itself. Signed-off-by: David S. Miller --- drivers/net/phy/mdio-bitbang.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/phy/mdio-bitbang.c b/drivers/net/phy/mdio-bitbang.c index 6428fcbbdd4b..daec9b05d168 100644 --- a/drivers/net/phy/mdio-bitbang.c +++ b/drivers/net/phy/mdio-bitbang.c @@ -234,7 +234,6 @@ void free_mdio_bitbang(struct mii_bus *bus) struct mdiobb_ctrl *ctrl = bus->priv; module_put(ctrl->ops->owner); - mdiobus_unregister(bus); mdiobus_free(bus); } EXPORT_SYMBOL(free_mdio_bitbang); -- cgit v1.2.3 From cbc351abe3c9bcec11c712dd41bb212748fd46d3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 15 Nov 2012 11:58:24 +0100 Subject: pinctrl/samsung: don't allow enabling pinctrl-samsung standalone The main samsung pinctrl module references the specific exynos4210 pinctrl driver, which selects the main driver in Kconfig. Making the main driver a silent "bool" option avoid this potential build error if CONFIG_PINCTRL_SAMSUNG=y && CONFIG_PINCTRL_EXYNOS4=n: drivers/built-in.o:(.rodata+0x4e4): undefined reference to `exynos4210_pin_ctrl' Signed-off-by: Arnd Bergmann Cc: Tomasz Figa Cc: Kyungmin Park Cc: Linus Walleij Acked-by: Kukjin Kim Signed-off-by: Linus Walleij --- drivers/pinctrl/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index d96caefd914a..aeecf0f72cad 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -178,7 +178,7 @@ config PINCTRL_COH901 ports of 8 GPIO pins each. config PINCTRL_SAMSUNG - bool "Samsung pinctrl driver" + bool depends on OF && GPIOLIB select PINMUX select PINCONF -- cgit v1.2.3 From af451af4e0a3a4cd7536843f585c96a9b095a4e8 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 9 Oct 2012 23:26:06 -0700 Subject: mtd: nand: fix Samsung SLC NAND identification regression A combination of the following two commits caused a regression in 3.7-rc1 when identifying some Samsung NAND, so that some previously working NAND were no longer detected properly: commit e3b88bd604283ef83ae6e8f53622d5b1ffe9d43a mtd: nand: add generic READ ID length calculation functions commit e2d3a35ee427aaba99b6c68a56609ce276c51270 mtd: nand: detect Samsung K9GBG08U0A, K9GAG08U0F ID Particularly, a regression was seen on Samsung K9F2G08U0B, with the following full 8-byte READ ID string: ec da 10 95 44 00 ec da The basic problem is that Samsung manufactures both SLC and MLC NAND that use a non-standard decoding table for deriving information from their IDs. I have heuristically determined that all the chips that use the new table have ID strings which wrap around after the 6th byte. Unfortunately, I overlooked the fact that some older Samsung SLC (which use a different decoding table) have "5 byte ID strings" which also wrap around after the 6th byte. This patch re-introduces a distinction between these old and new Samsung NAND by checking that the 6th byte is non-zero, allowing both old and new Samsung NAND to be detected properly. Signed-off-by: Brian Norris Tested-by: Brian Norris Reported-by: Marek Vasut Tested-by: Marek Vasut Signed-off-by: Artem Bityutskiy --- drivers/mtd/nand/nand_base.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index ec6841d8e956..d5ece6ea6f98 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2983,13 +2983,14 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip, /* * Field definitions are in the following datasheets: * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32) - * New style (6 byte ID): Samsung K9GAG08U0F (p.44) + * New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44) * Hynix MLC (6 byte ID): Hynix H27UBG8T2B (p.22) * - * Check for ID length, cell type, and Hynix/Samsung ID to decide what - * to do. + * Check for ID length, non-zero 6th byte, cell type, and Hynix/Samsung + * ID to decide what to do. */ - if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG) { + if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG && + id_data[5] != 0x00) { /* Calc pagesize */ mtd->writesize = 2048 << (extid & 0x03); extid >>= 2; -- cgit v1.2.3 From 6924d99fcdf1a688538a3cdebd1f135c22eec191 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 14 Nov 2012 21:46:30 -0800 Subject: mtd: nand: fix Samsung SLC detection regression This patch fixes errors seen in identifying old Samsung SLC, due to the following commits: commit e2d3a35ee427aaba99b6c68a56609ce276c51270 mtd: nand: detect Samsung K9GBG08U0A, K9GAG08U0F ID commit e3b88bd604283ef83ae6e8f53622d5b1ffe9d43a mtd: nand: add generic READ ID length calculation functions Some Samsung NAND with "5-byte" ID really appear to have 6-byte IDs, with wraparound like: Samsung K9K8G08U0D ec d3 51 95 58 ec ec d3 Samsung K9F1G08U0C ec f1 00 95 40 ec ec f1 Samsung K9F2G08U0B ec da 10 95 44 00 ec da This bad wraparound makes it hard to reliably detect the difference between Samsung SLC with 5-byte ID and Samsung SLC with 6-byte ID. The fix is to, for now, only use the new Samsung table for MLC. We cannot support the new SLC (K9FAG08U0M) until Samsung gives better ID decode information. Note that this applies in addition to the previous regression fix: commit bc86cf7af2ebda88056538e8edff852ee627f76a mtd: nand: fix Samsung SLC NAND identification regression Together, these patches completely restore the previous detection behavior so that we cannot see any more regressions in Samsung SLC NAND (finger crossed). With luck, I can get a hold of a Samsung representative and stop having to cross my fingers eventually. Reported-by: Sylwester Nawrocki Tested-by: Sylwester Nawrocki Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy --- drivers/mtd/nand/nand_base.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index d5ece6ea6f98..1a03b7f673ce 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2990,6 +2990,7 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip, * ID to decide what to do. */ if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG && + (chip->cellinfo & NAND_CI_CELLTYPE_MSK) && id_data[5] != 0x00) { /* Calc pagesize */ mtd->writesize = 2048 << (extid & 0x03); -- cgit v1.2.3 From b9196395c905edec512dfd6690428084228c16ec Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 14 Nov 2012 09:10:39 -0500 Subject: drm/radeon: fix logic error in atombios_encoders.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=50431 Reported-by: David Binderman Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Michel Dänzer --- drivers/gpu/drm/radeon/atombios_encoders.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c index ba498f8e47a2..010bae19554a 100644 --- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -1625,7 +1625,7 @@ radeon_atom_encoder_dpms_dig(struct drm_encoder *encoder, int mode) atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP, 0, 0); atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0); /* some early dce3.2 boards have a bug in their transmitter control table */ - if ((rdev->family != CHIP_RV710) || (rdev->family != CHIP_RV730)) + if ((rdev->family != CHIP_RV710) && (rdev->family != CHIP_RV730)) atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0); } if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector) { -- cgit v1.2.3 From ae289dc1f474ff380e9d7601f02e4d766cbba408 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 15 Nov 2012 09:22:40 +0100 Subject: s390/3215: fix tty close handling The 3215 console always has the RAW3215_FIXED flag set, which causes raw3215_shutdown() not to wait for outstanding I/O requests if an attached tty gets closed. The flag however can be simply removed, so we can guarantee that all requests belonging to the tty have been processed when the tty is closed. However the tasklet that belongs to the 3215 device may be scheduled even if there is no tty attached anymore, since we have a race between console and tty processing. Thefore unconditional tty_wakekup() in raw3215_wakeup() can cause the following NULL pointer dereference: 3.465368 Unable to handle kernel pointer dereference at virtual kernel address (null) 3.465448 Oops: 0004 #1 SMP 3.465454 Modules linked in: 3.465459 CPU: 1 Not tainted 3.6.0 #1 3.465462 Process swapper/1 (pid: 0, task: 000000003ffa4428, ksp: 000000003ffb7ce0) 3.465466 Krnl PSW : 0404100180000000 0000000000162f86 (__wake_up+0x46/0xb8) 3.465480 R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:1 PM:0 EA:3 Krnl GPRS: fffffffffffffffe 0000000000000000 0000000000000160 0000000000000001 3.465492 0000000000000001 0000000000000004 0000000000000004 000000000096b490 3.465499 0000000000000001 0000000000000100 0000000000000001 0000000000000001 3.465506 070000003fc87d60 0000000000000160 000000003fc87d68 000000003fc87d00 3.465526 Krnl Code: 0000000000162f76: e3c0f0a80004 lg %r12,168(%r15) 0000000000162f7c: 58000370 l %r0,880 #0000000000162f80: c007ffffffff00 xilf %r0,4294967295 >0000000000162f86: ba102000 cs %r1,%r0,0(%r2) 0000000000162f8a: 1211 ltr %r1,%r1 0000000000162f8c: a774002f brc 7,162fea 0000000000162f90: b904002d lgr %r2,%r13 0000000000162f94: b904003a lgr %r3,%r10 3.465597 Call Trace: 3.465599 (<0400000000000000> 0x400000000000000) 3.465602 <000000000048c77e> raw3215_wakeup+0x2e/0x40 3.465607 <0000000000134d66> tasklet_action+0x96/0x168 3.465612 <000000000013423c> __do_softirq+0xd8/0x21c 3.465615 <0000000000134678> irq_exit+0xa8/0xac 3.465617 <000000000046c232> do_IRQ+0x182/0x248 3.465621 <00000000005c8296> io_return+0x0/0x8 3.465625 <00000000005c7cac> vtime_stop_cpu+0x4c/0xb8 3.465629 (<0000000000194e06> tick_nohz_idle_enter+0x4e/0x74) 3.465633 <0000000000104760> cpu_idle+0x170/0x184 3.465636 <00000000005b5182> smp_start_secondary+0xd6/0xe0 3.465641 <00000000005c86be> restart_int_handler+0x56/0x6c 3.465643 <0000000000000000> 0x0 3.465645 Last Breaking-Event-Address: 3.465647 <0000000000403136> tty_wakeup+0x46/0x98 3.465652 3.465654 Kernel panic - not syncing: Fatal exception in interrupt 01: HCPGIR450W CP entered; disabled wait PSW 00020001 80000000 00000000 0010F63C The easiest solution is simply to check if tty is NULL in the tasklet. If it is NULL nothing is to do (no tty attached), otherwise tty_wakeup() can be called, since we hold a reference to the tty. This is not nice... but it is a small patch and it works. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/char/con3215.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c index 9ffb6d5f17aa..4ed343e4eb41 100644 --- a/drivers/s390/char/con3215.c +++ b/drivers/s390/char/con3215.c @@ -44,7 +44,6 @@ #define RAW3215_NR_CCWS 3 #define RAW3215_TIMEOUT HZ/10 /* time for delayed output */ -#define RAW3215_FIXED 1 /* 3215 console device is not be freed */ #define RAW3215_WORKING 4 /* set if a request is being worked on */ #define RAW3215_THROTTLED 8 /* set if reading is disabled */ #define RAW3215_STOPPED 16 /* set if writing is disabled */ @@ -339,8 +338,10 @@ static void raw3215_wakeup(unsigned long data) struct tty_struct *tty; tty = tty_port_tty_get(&raw->port); - tty_wakeup(tty); - tty_kref_put(tty); + if (tty) { + tty_wakeup(tty); + tty_kref_put(tty); + } } /* @@ -629,8 +630,7 @@ static void raw3215_shutdown(struct raw3215_info *raw) DECLARE_WAITQUEUE(wait, current); unsigned long flags; - if (!(raw->port.flags & ASYNC_INITIALIZED) || - (raw->flags & RAW3215_FIXED)) + if (!(raw->port.flags & ASYNC_INITIALIZED)) return; /* Wait for outstanding requests, then free irq */ spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); @@ -926,8 +926,6 @@ static int __init con3215_init(void) dev_set_drvdata(&cdev->dev, raw); cdev->handler = raw3215_irq; - raw->flags |= RAW3215_FIXED; - /* Request the console irq */ if (raw3215_startup(raw) != 0) { raw3215_free_info(raw); -- cgit v1.2.3 From 888155bbf63a5f955d7a45932ff05e848f715bf0 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 12 Nov 2012 11:07:24 +0000 Subject: vmwgfx: return an -EFAULT if copy_to_user() fails copy_to_user() returns the number of bytes remaining to be copied, but we want to return a negative error code here. I fixed a couple of these last year, but I missed this one. Signed-off-by: Dan Carpenter Reviewed-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c index b07ca2e4d04b..7290811f89be 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c @@ -110,6 +110,8 @@ int vmw_get_cap_3d_ioctl(struct drm_device *dev, void *data, memcpy_fromio(bounce, &fifo_mem[SVGA_FIFO_3D_CAPS], size); ret = copy_to_user(buffer, bounce, size); + if (ret) + ret = -EFAULT; vfree(bounce); if (unlikely(ret != 0)) -- cgit v1.2.3 From ac207ed2471150e06af0afc76e4becc701fa2733 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Tue, 13 Nov 2012 18:31:55 +0000 Subject: ttm: Clear the ttm page allocated from high memory zone correctly The TTM page can be allocated from high memory. In such case it is wrong to use the page_address(page) as the virtual address for the high memory page. bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=50241 Signed-off-by: Zhao Yakui Cc: stable@vger.kernel.org Reviewed-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_page_alloc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/ttm/ttm_page_alloc.c b/drivers/gpu/drm/ttm/ttm_page_alloc.c index 860dc4813e99..bd2a3b40cd12 100644 --- a/drivers/gpu/drm/ttm/ttm_page_alloc.c +++ b/drivers/gpu/drm/ttm/ttm_page_alloc.c @@ -749,7 +749,10 @@ static int ttm_get_pages(struct page **pages, unsigned npages, int flags, /* clear the pages coming from the pool if requested */ if (flags & TTM_PAGE_FLAG_ZERO_ALLOC) { list_for_each_entry(p, &plist, lru) { - clear_page(page_address(p)); + if (PageHighMem(p)) + clear_highpage(p); + else + clear_page(page_address(p)); } } -- cgit v1.2.3 From 55aa914e9274cf1d55397cc04eb926eb055c79f7 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Fri, 9 Nov 2012 12:10:43 +0000 Subject: drm/ttm: remove unneeded preempt_disable/enable It is unnecessary to disable preemption explicitly while calling copy_highpage(). Because copy_highpage() will do it again through kmap_atomic/kunmap_atomic. Signed-off-by: Akinobu Mita Reviewed-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_tt.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index bf8260133ea9..7d759a430294 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -308,9 +308,7 @@ int ttm_tt_swapin(struct ttm_tt *ttm) if (unlikely(to_page == NULL)) goto out_err; - preempt_disable(); copy_highpage(to_page, from_page); - preempt_enable(); page_cache_release(from_page); } @@ -358,9 +356,7 @@ int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistent_swap_storage) ret = PTR_ERR(to_page); goto out_err; } - preempt_disable(); copy_highpage(to_page, from_page); - preempt_enable(); set_page_dirty(to_page); mark_page_accessed(to_page); page_cache_release(to_page); -- cgit v1.2.3 From 60817a680b1bd3341b6909fab7d8a1fcc3a78369 Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Tue, 9 Oct 2012 15:37:48 +0800 Subject: libata-acpi: Fix NULL ptr derference in ata_acpi_dev_handle commit 6b66d95895c149cbc04d4fac5a2f5477c543a8ae didn't handle SATA PMP case in ata_acpi_bind_device and will cause a NULL ptr dereference when user attached a SATA drive to the PMP port. Fix this by checking PMP support. This bug is reported by Dan van der Ster in the following bugzilla page: https://bugzilla.kernel.org/show_bug.cgi?id=48211 Reported-by: Dan van der Ster Tested-by: Dan van der Ster Signed-off-by: Aaron Lu Cc: Signed-off-by: Jeff Garzik Tested-by: Simon --- drivers/ata/libata-acpi.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index fd9ecf74e631..5b0ba3f20edc 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -1105,10 +1105,15 @@ static int ata_acpi_bind_device(struct ata_port *ap, struct scsi_device *sdev, struct acpi_device *acpi_dev; struct acpi_device_power_state *states; - if (ap->flags & ATA_FLAG_ACPI_SATA) - ata_dev = &ap->link.device[sdev->channel]; - else + if (ap->flags & ATA_FLAG_ACPI_SATA) { + if (!sata_pmp_attached(ap)) + ata_dev = &ap->link.device[sdev->id]; + else + ata_dev = &ap->pmp_link[sdev->channel].device[sdev->id]; + } + else { ata_dev = &ap->link.device[sdev->id]; + } *handle = ata_dev_acpi_handle(ata_dev); -- cgit v1.2.3 From 9addf6afeef0f2c9a1fef880e2dbe633d15a89bd Mon Sep 17 00:00:00 2001 From: Vipul Kumar Samar Date: Thu, 8 Nov 2012 20:39:54 +0530 Subject: pata_arasan: Initialize cf clock to 166MHz PATA arasan driver expects the clock to be set to 166 MHz for proper functioning. This patch sets clk to 166 MHz in probe. Signed-off-by: Vipul Kumar Samar Signed-off-by: Viresh Kumar Signed-off-by: Jeff Garzik --- drivers/ata/pata_arasan_cf.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c index 26201ebef3ca..71111f214eab 100644 --- a/drivers/ata/pata_arasan_cf.c +++ b/drivers/ata/pata_arasan_cf.c @@ -317,6 +317,12 @@ static int cf_init(struct arasan_cf_dev *acdev) return ret; } + ret = clk_set_rate(acdev->clk, 166000000); + if (ret) { + dev_warn(acdev->host->dev, "clock set rate failed"); + return ret; + } + spin_lock_irqsave(&acdev->host->lock, flags); /* configure CF interface clock */ writel((pdata->cf_if_clk <= CF_IF_CLK_200M) ? pdata->cf_if_clk : -- cgit v1.2.3 From c37472d3f4ec6bf98b443490e069f31d18bcd6f5 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 6 Nov 2012 22:55:32 +0100 Subject: sata_highbank: mark ahci_highbank_probe as __devinit The ahci_highbank_probe function is incorrectly marked as __init, which means it can get discarded at boot time, which might be a problem if for some reason the device only becomes operational after loading another module. Using __devinit instead avoids seeing this warning for every build: WARNING: vmlinux.o(.data+0xf7b0): Section mismatch in reference from the variable ahci_highbank_driver to the function .init.text:ahci_highbank_probe() The variable ahci_highbank_driver references the function __init ahci_highbank_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Arnd Bergmann Cc: Mark Langsdorf Cc: Rob Herring Signed-off-by: Jeff Garzik --- drivers/ata/sata_highbank.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c index 0d7c4c2cd26f..36a141a2b22b 100644 --- a/drivers/ata/sata_highbank.c +++ b/drivers/ata/sata_highbank.c @@ -260,7 +260,7 @@ static const struct of_device_id ahci_of_match[] = { }; MODULE_DEVICE_TABLE(of, ahci_of_match); -static int __init ahci_highbank_probe(struct platform_device *pdev) +static int __devinit ahci_highbank_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct ahci_host_priv *hpriv; -- cgit v1.2.3 From cd705d5ad49bb8894dda2726dcaef8f63ddeba43 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 21 Oct 2012 18:57:56 +0200 Subject: libata debugging: Warn when unable to find timing descriptor based on xfer_mode ata_timing_find_mode could return NULL which is not checked by all low-level ATA drivers using it and cause a NULL ptr deref. Warn at least so that possible issues can get fixed easily. Signed-off-by: Borislav Petkov Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 3cc7096cfda7..f46fbd3bd3fb 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2942,6 +2942,10 @@ const struct ata_timing *ata_timing_find_mode(u8 xfer_mode) if (xfer_mode == t->mode) return t; + + WARN_ONCE(true, "%s: unable to find timing for xfer_mode 0x%x\n", + __func__, xfer_mode); + return NULL; } -- cgit v1.2.3 From b03e66a6be91f8389fcd902ab6c1563db1c9c06b Mon Sep 17 00:00:00 2001 From: David Milburn Date: Mon, 29 Oct 2012 18:00:22 -0500 Subject: sata_svw: check DMA start bit before reset If kdump is triggered with pending IO, controller may not respond causing kdump to fail. http://marc.info/?l=linux-ide&m=133032255424658&w=2 During error recovery ata_do_dev_read_id never completes due hang in mmio_insw. ata_do_dev_read_id ata_sff_data_xfer ioread16_rep mmio_insw if DMA start bit is cleared before reset, PIO command is successful and kdump succeeds. Signed-off-by: David Milburn Signed-off-by: Jeff Garzik --- drivers/ata/sata_svw.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index 44a4256533e1..08608de87e4e 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -142,6 +142,39 @@ static int k2_sata_scr_write(struct ata_link *link, return 0; } +static int k2_sata_softreset(struct ata_link *link, + unsigned int *class, unsigned long deadline) +{ + u8 dmactl; + void __iomem *mmio = link->ap->ioaddr.bmdma_addr; + + dmactl = readb(mmio + ATA_DMA_CMD); + + /* Clear the start bit */ + if (dmactl & ATA_DMA_START) { + dmactl &= ~ATA_DMA_START; + writeb(dmactl, mmio + ATA_DMA_CMD); + } + + return ata_sff_softreset(link, class, deadline); +} + +static int k2_sata_hardreset(struct ata_link *link, + unsigned int *class, unsigned long deadline) +{ + u8 dmactl; + void __iomem *mmio = link->ap->ioaddr.bmdma_addr; + + dmactl = readb(mmio + ATA_DMA_CMD); + + /* Clear the start bit */ + if (dmactl & ATA_DMA_START) { + dmactl &= ~ATA_DMA_START; + writeb(dmactl, mmio + ATA_DMA_CMD); + } + + return sata_sff_hardreset(link, class, deadline); +} static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) { @@ -346,6 +379,8 @@ static struct scsi_host_template k2_sata_sht = { static struct ata_port_operations k2_sata_ops = { .inherits = &ata_bmdma_port_ops, + .softreset = k2_sata_softreset, + .hardreset = k2_sata_hardreset, .sff_tf_load = k2_sata_tf_load, .sff_tf_read = k2_sata_tf_read, .sff_check_status = k2_stat_check_status, -- cgit v1.2.3 From 29448ec129c5c9c7ece2ef28c72a0dafd70c8af2 Mon Sep 17 00:00:00 2001 From: Yuanhan Liu Date: Tue, 16 Oct 2012 22:59:01 +0800 Subject: [libata] PM callbacks should be conditionally compiled on CONFIG_PM_SLEEP This will fix warnings like following when CONFIG_PM_SLEEP is not set: warning: 'xxx_suspend' defined but not used [-Wunused-function] warning: 'xxx_resume' defined but not used [-Wunused-function] Because SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) Only references the callbacks on CONFIG_PM_SLEEP (instead of CONFIG_PM). Cc: Viresh Kumar Cc: linux-ide@vger.kernel.org Signed-off-by: Yuanhan Liu Signed-off-by: Fengguang Wu Signed-off-by: Jeff Garzik --- drivers/ata/ahci_platform.c | 2 +- drivers/ata/pata_arasan_cf.c | 2 +- drivers/ata/sata_highbank.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index b1ae48054dc5..b7078afddb74 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -238,7 +238,7 @@ static int __devexit ahci_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int ahci_suspend(struct device *dev) { struct ahci_platform_data *pdata = dev_get_platdata(dev); diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c index 71111f214eab..371fd2c698b7 100644 --- a/drivers/ata/pata_arasan_cf.c +++ b/drivers/ata/pata_arasan_cf.c @@ -914,7 +914,7 @@ static int __devexit arasan_cf_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int arasan_cf_suspend(struct device *dev) { struct ata_host *host = dev_get_drvdata(dev); diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c index 36a141a2b22b..400bf1c3e982 100644 --- a/drivers/ata/sata_highbank.c +++ b/drivers/ata/sata_highbank.c @@ -378,7 +378,7 @@ static int __devexit ahci_highbank_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int ahci_highbank_suspend(struct device *dev) { struct ata_host *host = dev_get_drvdata(dev); -- cgit v1.2.3 From 6fc4adca6ce3e1d57a42707019dddcb883578a91 Mon Sep 17 00:00:00 2001 From: Simon Marchi Date: Thu, 15 Nov 2012 18:13:19 +0000 Subject: tilegx: request_irq with a non-null device name This patch simply makes the tilegx net driver call request_irq with a non-null name. It makes the output in /proc/interrupts more obvious, but also helps tools that don't expect to find null there. Signed-off-by: Simon Marchi Acked-by: Chris Metcalf Signed-off-by: David S. Miller --- drivers/net/ethernet/tile/tilegx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c index 4e9810013850..66e025ad5df1 100644 --- a/drivers/net/ethernet/tile/tilegx.c +++ b/drivers/net/ethernet/tile/tilegx.c @@ -917,7 +917,7 @@ static int tile_net_setup_interrupts(struct net_device *dev) ingress_irq = rc; tile_irq_activate(ingress_irq, TILE_IRQ_PERCPU); rc = request_irq(ingress_irq, tile_net_handle_ingress_irq, - 0, NULL, NULL); + 0, "tile_net", NULL); if (rc != 0) { netdev_err(dev, "request_irq failed: %d\n", rc); destroy_irq(ingress_irq); -- cgit v1.2.3 From a485e827f07bfdd0762059386e6e787bed6e81ee Mon Sep 17 00:00:00 2001 From: Albert Pool Date: Tue, 30 Oct 2012 20:58:06 +0100 Subject: rtlwifi: rtl8192cu: Add new USB ID This is an ISY IWL 2000. Probably a clone of Belkin F7D1102 050d:1102. Its FCC ID is the same. Signed-off-by: Albert Pool Cc: stable@vger.kernel.org Acked-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index 9970c2b1b199..b7e6607e6b6d 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -297,6 +297,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = { /*=== Customer ID ===*/ /****** 8188CU ********/ {RTL_USB_DEVICE(0x050d, 0x1102, rtl92cu_hal_cfg)}, /*Belkin - Edimax*/ + {RTL_USB_DEVICE(0x050d, 0x11f2, rtl92cu_hal_cfg)}, /*Belkin - ISY*/ {RTL_USB_DEVICE(0x06f8, 0xe033, rtl92cu_hal_cfg)}, /*Hercules - Edimax*/ {RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/ {RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/ -- cgit v1.2.3 From b1a47aa5e1e159e2cb06d7dfcc17ef5149b09299 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Thu, 15 Nov 2012 15:58:47 -0800 Subject: mwifiex: fix system hang issue in cmd timeout error case Reported by Tim Shepard: I was seeing sporadic failures (wedgeups), and the majority of those failures I saw printed the printouts in mwifiex_cmd_timeout_func with cmd = 0xe5 which is CMD_802_11_HS_CFG_ENH. When this happens, two minutes later I get notified that the rtcwake thread is blocked, like this: INFO: task rtcwake:3495 blocked for more than 120 seconds. To get the hung thread unblocked we wake up the cmd wait queue and cancel the ioctl. Cc: "3.4+" Reported-by: Tim Shepard Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cmdevt.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c index 8d465107f52b..ae9010ed58de 100644 --- a/drivers/net/wireless/mwifiex/cmdevt.c +++ b/drivers/net/wireless/mwifiex/cmdevt.c @@ -890,9 +890,6 @@ mwifiex_cmd_timeout_func(unsigned long function_context) return; } cmd_node = adapter->curr_cmd; - if (cmd_node->wait_q_enabled) - adapter->cmd_wait_q.status = -ETIMEDOUT; - if (cmd_node) { adapter->dbg.timeout_cmd_id = adapter->dbg.last_cmd_id[adapter->dbg.last_cmd_index]; @@ -938,6 +935,14 @@ mwifiex_cmd_timeout_func(unsigned long function_context) dev_err(adapter->dev, "ps_mode=%d ps_state=%d\n", adapter->ps_mode, adapter->ps_state); + + if (cmd_node->wait_q_enabled) { + adapter->cmd_wait_q.status = -ETIMEDOUT; + wake_up_interruptible(&adapter->cmd_wait_q.wait); + mwifiex_cancel_pending_ioctl(adapter); + /* reset cmd_sent flag to unblock new commands */ + adapter->cmd_sent = false; + } } if (adapter->hw_status == MWIFIEX_HW_STATUS_INITIALIZING) mwifiex_init_fw_complete(adapter); -- cgit v1.2.3 From dd321acddc3be1371263b8c9e6c6f2af89f63d57 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Thu, 15 Nov 2012 15:58:48 -0800 Subject: mwifiex: report error to MMC core if we cannot suspend When host_sleep_config command fails we should return error to MMC core to indicate the failure for our device. The misspelled variable is also removed as it's redundant. Cc: "3.0+" Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/sdio.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c index fc8a9bfa1248..82cf0fa2d9f6 100644 --- a/drivers/net/wireless/mwifiex/sdio.c +++ b/drivers/net/wireless/mwifiex/sdio.c @@ -161,7 +161,6 @@ static int mwifiex_sdio_suspend(struct device *dev) struct sdio_mmc_card *card; struct mwifiex_adapter *adapter; mmc_pm_flag_t pm_flag = 0; - int hs_actived = 0; int i; int ret = 0; @@ -188,12 +187,14 @@ static int mwifiex_sdio_suspend(struct device *dev) adapter = card->adapter; /* Enable the Host Sleep */ - hs_actived = mwifiex_enable_hs(adapter); - if (hs_actived) { - pr_debug("cmd: suspend with MMC_PM_KEEP_POWER\n"); - ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); + if (!mwifiex_enable_hs(adapter)) { + dev_err(adapter->dev, "cmd: failed to suspend\n"); + return -EFAULT; } + dev_dbg(adapter->dev, "cmd: suspend with MMC_PM_KEEP_POWER\n"); + ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); + /* Indicate device suspended */ adapter->is_suspended = true; -- cgit v1.2.3 From 2ca3cb50edc351875df13d083524f524cdeb3054 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 16 Nov 2012 14:14:56 -0800 Subject: rapidio: fix kernel-doc warnings Fix rapidio kernel-doc warnings: Warning(drivers/rapidio/rio.c:415): No description found for parameter 'local' Warning(drivers/rapidio/rio.c:415): Excess function parameter 'lstart' description in 'rio_map_inb_region' Warning(include/linux/rio.h:290): No description found for parameter 'switches' Warning(include/linux/rio.h:290): No description found for parameter 'destid_table' Signed-off-by: Randy Dunlap Cc: Matt Porter Acked-by: Alexandre Bounine Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/rio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index c17ae22567e0..0c6fcb461faf 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -401,7 +401,7 @@ EXPORT_SYMBOL_GPL(rio_release_inb_pwrite); /** * rio_map_inb_region -- Map inbound memory region. * @mport: Master port. - * @lstart: physical address of memory region to be mapped + * @local: physical address of memory region to be mapped * @rbase: RIO base address assigned to this window * @size: Size of the memory region * @rflags: Flags for mapping. -- cgit v1.2.3 From b334b64862efd0eee8d07f2faabbe4b56ee974cd Mon Sep 17 00:00:00 2001 From: Cyril Roelandt Date: Sun, 11 Nov 2012 21:49:30 +0100 Subject: iommu/tegra-smmu.c: fix dentry reference leak in smmu_debugfs_stats_show(). Call to d_find_alias() needs a corresponding dput(). Signed-off-by: Cyril Roelandt Signed-off-by: Joerg Roedel --- drivers/iommu/tegra-smmu.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c index a649f146d17b..c0f7a4266263 100644 --- a/drivers/iommu/tegra-smmu.c +++ b/drivers/iommu/tegra-smmu.c @@ -1054,6 +1054,7 @@ static int smmu_debugfs_stats_show(struct seq_file *s, void *v) stats[i], val, offs); } seq_printf(s, "\n"); + dput(dent); return 0; } -- cgit v1.2.3 From 3da4af0affbb797e8ac4c2b4598da0c34b8cc52a Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Tue, 13 Nov 2012 10:22:03 -0700 Subject: intel-iommu: Fix lookup in add device We can't assume this device exists, fall back to the bridge itself. Signed-off-by: Alex Williamson Tested-by: Matthew Thode Cc: stable@vger.kernel.org Signed-off-by: Joerg Roedel --- drivers/iommu/intel-iommu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index d4a4cd445cab..0badfa48b32b 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -4108,7 +4108,7 @@ static void swap_pci_ref(struct pci_dev **from, struct pci_dev *to) static int intel_iommu_add_device(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); - struct pci_dev *bridge, *dma_pdev; + struct pci_dev *bridge, *dma_pdev = NULL; struct iommu_group *group; int ret; @@ -4122,7 +4122,7 @@ static int intel_iommu_add_device(struct device *dev) dma_pdev = pci_get_domain_bus_and_slot( pci_domain_nr(pdev->bus), bridge->subordinate->number, 0); - else + if (!dma_pdev) dma_pdev = pci_dev_get(bridge); } else dma_pdev = pci_dev_get(pdev); -- cgit v1.2.3 From e91337609afdfaa1936c91b519ba7d7e426814cc Mon Sep 17 00:00:00 2001 From: Jamie Lentin Date: Sun, 28 Oct 2012 12:23:24 +0000 Subject: mvebu-gpio: Disable blinking when enabling a GPIO for output The plat-orion GPIO driver would disable any pin blinking whenever using a pin for output. Do the same here, as a blinking LED will continue to blink regardless of what the GPIO pin level is. Signed-off-by: Jamie Lentin Acked-by: Thomas Petazzoni Signed-off-by: Linus Walleij --- drivers/gpio/gpio-mvebu.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'drivers') diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index cf7afb9eb61a..be65c0451ad5 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -92,6 +92,11 @@ static inline void __iomem *mvebu_gpioreg_out(struct mvebu_gpio_chip *mvchip) return mvchip->membase + GPIO_OUT_OFF; } +static inline void __iomem *mvebu_gpioreg_blink(struct mvebu_gpio_chip *mvchip) +{ + return mvchip->membase + GPIO_BLINK_EN_OFF; +} + static inline void __iomem *mvebu_gpioreg_io_conf(struct mvebu_gpio_chip *mvchip) { return mvchip->membase + GPIO_IO_CONF_OFF; @@ -206,6 +211,23 @@ static int mvebu_gpio_get(struct gpio_chip *chip, unsigned pin) return (u >> pin) & 1; } +static void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value) +{ + struct mvebu_gpio_chip *mvchip = + container_of(chip, struct mvebu_gpio_chip, chip); + unsigned long flags; + u32 u; + + spin_lock_irqsave(&mvchip->lock, flags); + u = readl_relaxed(mvebu_gpioreg_blink(mvchip)); + if (value) + u |= 1 << pin; + else + u &= ~(1 << pin); + writel_relaxed(u, mvebu_gpioreg_blink(mvchip)); + spin_unlock_irqrestore(&mvchip->lock, flags); +} + static int mvebu_gpio_direction_input(struct gpio_chip *chip, unsigned pin) { struct mvebu_gpio_chip *mvchip = @@ -244,6 +266,7 @@ static int mvebu_gpio_direction_output(struct gpio_chip *chip, unsigned pin, if (ret) return ret; + mvebu_gpio_blink(chip, pin, 0); mvebu_gpio_set(chip, pin, value); spin_lock_irqsave(&mvchip->lock, flags); -- cgit v1.2.3 From cb144fe8e0e70ccb12e93c9c9f010a25b3f2a158 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 1 Nov 2012 11:22:11 +0100 Subject: gpio: adnp: Depend on OF_GPIO instead of OF The driver accesses the of_node field of struct gpio_chip, which is only available if OF_GPIO is selected. This solves a build issue on SPARC which conflicts with OF_GPIO and therefore does not provide this field. Signed-off-by: Thierry Reding Signed-off-by: Linus Walleij --- drivers/gpio/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index f11d8e3b4041..47150f5ded04 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -466,7 +466,7 @@ config GPIO_ADP5588_IRQ config GPIO_ADNP tristate "Avionic Design N-bit GPIO expander" - depends on I2C && OF + depends on I2C && OF_GPIO help This option enables support for N GPIOs found on Avionic Design I2C GPIO expanders. The register space will be extended by powers -- cgit v1.2.3 From cbf24fad8e6e97b7cd7dd1099f5b801689dc234a Mon Sep 17 00:00:00 2001 From: "Daniel M. Weeks" Date: Tue, 6 Nov 2012 23:51:05 -0500 Subject: gpio-mcp23s08: Build I2C support even when CONFIG_I2C=m The driver has both SPI and I2C pieces. The appropriate pieces are built based on whether SPI and/or I2C is/are enabled. However, it was only checking if I2C was built-in, never if it was built as a module. This patch checks for either since building both this driver and I2C as modules is possible. Signed-off-by: Daniel M. Weeks Signed-off-by: Linus Walleij --- drivers/gpio/gpio-mcp23s08.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c index 0f425189de11..ce1c84760076 100644 --- a/drivers/gpio/gpio-mcp23s08.c +++ b/drivers/gpio/gpio-mcp23s08.c @@ -77,7 +77,7 @@ struct mcp23s08_driver_data { /*----------------------------------------------------------------------*/ -#ifdef CONFIG_I2C +#if IS_ENABLED(CONFIG_I2C) static int mcp23008_read(struct mcp23s08 *mcp, unsigned reg) { @@ -399,7 +399,7 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev, break; #endif /* CONFIG_SPI_MASTER */ -#ifdef CONFIG_I2C +#if IS_ENABLED(CONFIG_I2C) case MCP_TYPE_008: mcp->ops = &mcp23008_ops; mcp->chip.ngpio = 8; @@ -473,7 +473,7 @@ fail: /*----------------------------------------------------------------------*/ -#ifdef CONFIG_I2C +#if IS_ENABLED(CONFIG_I2C) static int __devinit mcp230xx_probe(struct i2c_client *client, const struct i2c_device_id *id) -- cgit v1.2.3 From 3ea160b3e8f0de8161861995d9901f61192fc0b0 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 16 Nov 2012 08:06:16 -0800 Subject: target: Fix handling of aborted commands - If we stop processing an already-aborted command in target_execute_cmd(), then we need to complete t_transport_stop_comp to wake up the the TMR handling thread, or else it will end up waiting forever. - If we've a already sent an "aborted" status for a command in transport_check_aborted_status() then we should bail out of transport_send_task_abort() to avoid freeing the command twice. Signed-off-by: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 9097155e9ebe..dcecbfb17243 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1819,8 +1819,10 @@ void target_execute_cmd(struct se_cmd *cmd) /* * If the received CDB has aleady been aborted stop processing it here. */ - if (transport_check_aborted_status(cmd, 1)) + if (transport_check_aborted_status(cmd, 1)) { + complete(&cmd->t_transport_stop_comp); return; + } /* * Determine if IOCTL context caller in requesting the stopping of this @@ -3067,7 +3069,7 @@ void transport_send_task_abort(struct se_cmd *cmd) unsigned long flags; spin_lock_irqsave(&cmd->t_state_lock, flags); - if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION) { + if (cmd->se_cmd_flags & (SCF_SENT_CHECK_CONDITION | SCF_SENT_DELAYED_TAS)) { spin_unlock_irqrestore(&cmd->t_state_lock, flags); return; } -- cgit v1.2.3 From e1b69fdf33f63cfa600b992172d7376f9d9ef2e9 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 15 Oct 2012 17:57:36 +0200 Subject: iwlwifi: don't WARN when a non empty queue is disabled This can happen when we shut down suddenly an interface. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/tx.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 105e3af3c621..79a4ddc002d3 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -480,20 +480,12 @@ void iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id, int fifo, void iwl_trans_pcie_txq_disable(struct iwl_trans *trans, int txq_id) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - u16 rd_ptr, wr_ptr; - int n_bd = trans_pcie->txq[txq_id].q.n_bd; if (!test_and_clear_bit(txq_id, trans_pcie->queue_used)) { WARN_ONCE(1, "queue %d not used", txq_id); return; } - rd_ptr = iwl_read_prph(trans, SCD_QUEUE_RDPTR(txq_id)) & (n_bd - 1); - wr_ptr = iwl_read_prph(trans, SCD_QUEUE_WRPTR(txq_id)); - - WARN_ONCE(rd_ptr != wr_ptr, "queue %d isn't empty: [%d,%d]", - txq_id, rd_ptr, wr_ptr); - iwl_txq_set_inactive(trans, txq_id); IWL_DEBUG_TX_QUEUES(trans, "Deactivate queue %d\n", txq_id); } -- cgit v1.2.3 From 4113014f2d7bef992ed373c30b6b4ba4be6969ea Mon Sep 17 00:00:00 2001 From: Kelly Doran Date: Thu, 15 Nov 2012 14:37:28 +1000 Subject: drm/nvc0/disp: fix thinko in vblank regression fix.. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/engine/disp/nv50.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c b/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c index 05a909a17cee..15b182c84ce8 100644 --- a/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c +++ b/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c @@ -49,13 +49,7 @@ nv50_disp_intr_vblank(struct nv50_disp_priv *priv, int crtc) if (chan->vblank.crtc != crtc) continue; - if (nv_device(priv)->chipset == 0x50) { - nv_wr32(priv, 0x001704, chan->vblank.channel); - nv_wr32(priv, 0x001710, 0x80000000 | chan->vblank.ctxdma); - bar->flush(bar); - nv_wr32(priv, 0x001570, chan->vblank.offset); - nv_wr32(priv, 0x001574, chan->vblank.value); - } else { + if (nv_device(priv)->chipset >= 0xc0) { nv_wr32(priv, 0x001718, 0x80000000 | chan->vblank.channel); bar->flush(bar); nv_wr32(priv, 0x06000c, @@ -63,6 +57,17 @@ nv50_disp_intr_vblank(struct nv50_disp_priv *priv, int crtc) nv_wr32(priv, 0x060010, lower_32_bits(chan->vblank.offset)); nv_wr32(priv, 0x060014, chan->vblank.value); + } else { + nv_wr32(priv, 0x001704, chan->vblank.channel); + nv_wr32(priv, 0x001710, 0x80000000 | chan->vblank.ctxdma); + bar->flush(bar); + if (nv_device(priv)->chipset == 0x50) { + nv_wr32(priv, 0x001570, chan->vblank.offset); + nv_wr32(priv, 0x001574, chan->vblank.value); + } else { + nv_wr32(priv, 0x060010, chan->vblank.offset); + nv_wr32(priv, 0x060014, chan->vblank.value); + } } list_del(&chan->vblank.head); -- cgit v1.2.3 From 1f150b3e7a722ebfc68eec5d83a9fe1ee8d75d71 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sun, 11 Nov 2012 19:58:52 +0100 Subject: drm/nv40: allocate ctxprog with kmalloc Some archs defconfigs have CONFIG_FRAME_WARN set to 1024, which lead to this warning: drivers/gpu/drm/nouveau/core/engine/graph/ctxnv40.c: warning: the frame size of 1184 bytes is larger than 1024 bytes Reported-by: Geert Uytterhoeven Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/engine/graph/ctxnv40.c | 12 +++++++++--- drivers/gpu/drm/nouveau/core/engine/graph/nv40.c | 4 +++- drivers/gpu/drm/nouveau/core/engine/graph/nv40.h | 2 +- 3 files changed, 13 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/core/engine/graph/ctxnv40.c b/drivers/gpu/drm/nouveau/core/engine/graph/ctxnv40.c index e45035efb8ca..7bbb1e1b7a8d 100644 --- a/drivers/gpu/drm/nouveau/core/engine/graph/ctxnv40.c +++ b/drivers/gpu/drm/nouveau/core/engine/graph/ctxnv40.c @@ -669,21 +669,27 @@ nv40_grctx_fill(struct nouveau_device *device, struct nouveau_gpuobj *mem) }); } -void +int nv40_grctx_init(struct nouveau_device *device, u32 *size) { - u32 ctxprog[256], i; + u32 *ctxprog = kmalloc(256 * 4, GFP_KERNEL), i; struct nouveau_grctx ctx = { .device = device, .mode = NOUVEAU_GRCTX_PROG, .data = ctxprog, - .ctxprog_max = ARRAY_SIZE(ctxprog) + .ctxprog_max = 256, }; + if (!ctxprog) + return -ENOMEM; + nv40_grctx_generate(&ctx); nv_wr32(device, 0x400324, 0); for (i = 0; i < ctx.ctxprog_len; i++) nv_wr32(device, 0x400328, ctxprog[i]); *size = ctx.ctxvals_pos * 4; + + kfree(ctxprog); + return 0; } diff --git a/drivers/gpu/drm/nouveau/core/engine/graph/nv40.c b/drivers/gpu/drm/nouveau/core/engine/graph/nv40.c index 425001204a89..cc6574eeb80e 100644 --- a/drivers/gpu/drm/nouveau/core/engine/graph/nv40.c +++ b/drivers/gpu/drm/nouveau/core/engine/graph/nv40.c @@ -346,7 +346,9 @@ nv40_graph_init(struct nouveau_object *object) return ret; /* generate and upload context program */ - nv40_grctx_init(nv_device(priv), &priv->size); + ret = nv40_grctx_init(nv_device(priv), &priv->size); + if (ret) + return ret; /* No context present currently */ nv_wr32(priv, NV40_PGRAPH_CTXCTL_CUR, 0x00000000); diff --git a/drivers/gpu/drm/nouveau/core/engine/graph/nv40.h b/drivers/gpu/drm/nouveau/core/engine/graph/nv40.h index d2ac975afc2e..7da35a4e7970 100644 --- a/drivers/gpu/drm/nouveau/core/engine/graph/nv40.h +++ b/drivers/gpu/drm/nouveau/core/engine/graph/nv40.h @@ -15,7 +15,7 @@ nv44_graph_class(void *priv) return !(0x0baf & (1 << (device->chipset & 0x0f))); } -void nv40_grctx_init(struct nouveau_device *, u32 *size); +int nv40_grctx_init(struct nouveau_device *, u32 *size); void nv40_grctx_fill(struct nouveau_device *, struct nouveau_gpuobj *); #endif -- cgit v1.2.3 From bf7e438bcaff4b732f86bb2eb48fc4fee04dc31b Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sun, 11 Nov 2012 20:00:09 +0100 Subject: drm/nouveau: fix crash with noaccel=1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reported-by: Ortwin Glück Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_abi16.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_abi16.c b/drivers/gpu/drm/nouveau/nouveau_abi16.c index cc79c796afee..cbf1fc60a386 100644 --- a/drivers/gpu/drm/nouveau/nouveau_abi16.c +++ b/drivers/gpu/drm/nouveau/nouveau_abi16.c @@ -241,6 +241,10 @@ nouveau_abi16_ioctl_channel_alloc(ABI16_IOCTL_ARGS) if (unlikely(!abi16)) return -ENOMEM; + + if (!drm->channel) + return nouveau_abi16_put(abi16, -ENODEV); + client = nv_client(abi16->client); if (init->fb_ctxdma_handle == ~0 || init->tt_ctxdma_handle == ~0) -- cgit v1.2.3 From d9c390561d1c4e520773e62781bbf89bb6845353 Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Fri, 16 Nov 2012 17:47:16 +0100 Subject: drm/nouveau: add missing pll_calc calls Fixes a null pointer dereference when reclocking on my fermi. Signed-off-by: Maarten Lankhorst Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/include/subdev/clock.h | 3 ++- drivers/gpu/drm/nouveau/core/subdev/clock/nva3.c | 19 +++++++++++++++++++ drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c | 1 + 3 files changed, 22 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/core/include/subdev/clock.h b/drivers/gpu/drm/nouveau/core/include/subdev/clock.h index 39e73b91d360..41b7a6a76f19 100644 --- a/drivers/gpu/drm/nouveau/core/include/subdev/clock.h +++ b/drivers/gpu/drm/nouveau/core/include/subdev/clock.h @@ -54,6 +54,7 @@ int nv04_clock_pll_calc(struct nouveau_clock *, struct nvbios_pll *, int clk, struct nouveau_pll_vals *); int nv04_clock_pll_prog(struct nouveau_clock *, u32 reg1, struct nouveau_pll_vals *); - +int nva3_clock_pll_calc(struct nouveau_clock *, struct nvbios_pll *, + int clk, struct nouveau_pll_vals *); #endif diff --git a/drivers/gpu/drm/nouveau/core/subdev/clock/nva3.c b/drivers/gpu/drm/nouveau/core/subdev/clock/nva3.c index cc8d7d162d7c..9068c98b96f6 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/clock/nva3.c +++ b/drivers/gpu/drm/nouveau/core/subdev/clock/nva3.c @@ -66,6 +66,24 @@ nva3_clock_pll_set(struct nouveau_clock *clk, u32 type, u32 freq) return ret; } +int +nva3_clock_pll_calc(struct nouveau_clock *clock, struct nvbios_pll *info, + int clk, struct nouveau_pll_vals *pv) +{ + int ret, N, M, P; + + ret = nva3_pll_calc(clock, info, clk, &N, NULL, &M, &P); + + if (ret > 0) { + pv->refclk = info->refclk; + pv->N1 = N; + pv->M1 = M; + pv->log2P = P; + } + return ret; +} + + static int nva3_clock_ctor(struct nouveau_object *parent, struct nouveau_object *engine, struct nouveau_oclass *oclass, void *data, u32 size, @@ -80,6 +98,7 @@ nva3_clock_ctor(struct nouveau_object *parent, struct nouveau_object *engine, return ret; priv->base.pll_set = nva3_clock_pll_set; + priv->base.pll_calc = nva3_clock_pll_calc; return 0; } diff --git a/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c b/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c index 5ccce0b17bf3..f6962c9b6c36 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c +++ b/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c @@ -79,6 +79,7 @@ nvc0_clock_ctor(struct nouveau_object *parent, struct nouveau_object *engine, return ret; priv->base.pll_set = nvc0_clock_pll_set; + priv->base.pll_calc = nva3_clock_pll_calc; return 0; } -- cgit v1.2.3 From 3bb076af2ae571a48465972d5747175cec3564cd Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sat, 17 Nov 2012 21:33:15 +0100 Subject: drm/nouveau/bios: fix DCB v1.5 parsing memcmp->nv_strncmp conversion, in addition to name change, should have inverted the return value. But nv_strncmp does not act like strncmp - it does not check for string terminator, returns true/false instead of -1/0/1 and has different parameters order. Let's rename it to nv_memcmp and let it act like memcmp. Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/include/core/object.h | 14 +++++++++----- drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c | 2 +- 2 files changed, 10 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/core/include/core/object.h b/drivers/gpu/drm/nouveau/core/include/core/object.h index 818feabbf4a0..486f1a9217fd 100644 --- a/drivers/gpu/drm/nouveau/core/include/core/object.h +++ b/drivers/gpu/drm/nouveau/core/include/core/object.h @@ -175,14 +175,18 @@ nv_mo32(void *obj, u32 addr, u32 mask, u32 data) return temp; } -static inline bool -nv_strncmp(void *obj, u32 addr, u32 len, const char *str) +static inline int +nv_memcmp(void *obj, u32 addr, const char *str, u32 len) { + unsigned char c1, c2; + while (len--) { - if (nv_ro08(obj, addr++) != *(str++)) - return false; + c1 = nv_ro08(obj, addr++); + c2 = *(str++); + if (c1 != c2) + return c1 - c2; } - return true; + return 0; } #endif diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c b/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c index 7d750382a833..c51197157749 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c +++ b/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c @@ -64,7 +64,7 @@ dcb_table(struct nouveau_bios *bios, u8 *ver, u8 *hdr, u8 *cnt, u8 *len) } } else if (*ver >= 0x15) { - if (!nv_strncmp(bios, dcb - 7, 7, "DEV_REC")) { + if (!nv_memcmp(bios, dcb - 7, "DEV_REC", 7)) { u16 i2c = nv_ro16(bios, dcb + 2); *hdr = 4; *cnt = (i2c - dcb) / 10; -- cgit v1.2.3 From 8495c0da20bc496ac9d5da2b292adb28f61d2713 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sun, 18 Nov 2012 23:41:50 +0100 Subject: sis900: fix sis900_set_mode call parameters. Leftover of 57d6d456cfb89264f87d24f52640ede23fdf12bd ("sis900: stop using net_device.{base_addr, irq} and convert to __iomem."). It is needed for suspend / resume to work. Signed-off-by: Francois Romieu Tested-by: Jan Janssen Cc: Daniele Venzano Signed-off-by: David S. Miller --- drivers/net/ethernet/sis/sis900.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c index fb9f6b38511f..edf5edb13140 100644 --- a/drivers/net/ethernet/sis/sis900.c +++ b/drivers/net/ethernet/sis/sis900.c @@ -2479,7 +2479,7 @@ static int sis900_resume(struct pci_dev *pci_dev) netif_start_queue(net_dev); /* Workaround for EDB */ - sis900_set_mode(ioaddr, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED); + sis900_set_mode(sis_priv, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED); /* Enable all known interrupts by setting the interrupt mask. */ sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE); -- cgit v1.2.3 From c91cb7a75eaf65358aac5ea2b512ac60a9437ff4 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 16 Nov 2012 09:14:12 -0800 Subject: Input: mousedev - move /dev/input/mice to the correct minor When doing conversion to dynamic input numbers I inadvertently moved /dev/input/mice from c,13,63 to c,13,31. We need to fix this so that setups with statically populated /dev continue working. Tested-by: Krzysztof Mazur Tested-by: Pavel Machek Signed-off-by: Dmitry Torokhov --- drivers/input/mousedev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index 8f02e3d0e712..4c842c320c2e 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -12,8 +12,8 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #define MOUSEDEV_MINOR_BASE 32 -#define MOUSEDEV_MINORS 32 -#define MOUSEDEV_MIX 31 +#define MOUSEDEV_MINORS 31 +#define MOUSEDEV_MIX 63 #include #include -- cgit v1.2.3 From c415187b689842e8bb85135c070c822c2505f805 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Mon, 19 Nov 2012 10:40:15 +0530 Subject: OMAPFB: Fix possible null pointer dereferencing Commit 952cbaaa9b8beacc425f9aedf370468cbb737a2c (OMAPFB: Change dssdev->manager references) added checks for OMAPFB_WAITFORVSYNC ioctl to verify that the display, output and overlay manager exist. However, the code erroneously uses && for each part, which means that OMAPFB_WAITFORVSYNC may crash the kernel if no display, output or manager is associated with the framebuffer. This patch fixes the issue by using ||. Signed-off-by: Tushar Behera Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/omapfb/omapfb-ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c index 606b89f12351..d630b26a005c 100644 --- a/drivers/video/omap2/omapfb/omapfb-ioctl.c +++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c @@ -787,7 +787,7 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg) case OMAPFB_WAITFORVSYNC: DBG("ioctl WAITFORVSYNC\n"); - if (!display && !display->output && !display->output->manager) { + if (!display || !display->output || !display->output->manager) { r = -EINVAL; break; } -- cgit v1.2.3 From 963f2076e3b4d62e219b3fa60de7b50e335f5783 Mon Sep 17 00:00:00 2001 From: Abhilash Kesavan Date: Mon, 19 Nov 2012 15:48:46 +0530 Subject: i2c: s3c2410: Fix code to free gpios Store the requested gpios so that they can be freed on error/removal. Signed-off-by: Abhilash Kesavan Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-s3c2410.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 3e0335f1fc60..9d902725bac9 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -806,6 +806,7 @@ static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c) dev_err(i2c->dev, "invalid gpio[%d]: %d\n", idx, gpio); goto free_gpio; } + i2c->gpios[idx] = gpio; ret = gpio_request(gpio, "i2c-bus"); if (ret) { -- cgit v1.2.3 From da8fb123b041e487d28f54d3a77a15139cb9e3b9 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Sat, 17 Nov 2012 21:20:50 +0530 Subject: ath9k_hw: Fix regression in device reset Commit "ath9k: improve suspend/resume reliability" broke ath9k_htc and bringing up the device would hang indefinitely. Fix this. Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 8e1559aba495..1829b445d0b0 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1456,7 +1456,7 @@ static bool ath9k_hw_set_reset_reg(struct ath_hw *ah, u32 type) switch (type) { case ATH9K_RESET_POWER_ON: ret = ath9k_hw_set_reset_power_on(ah); - if (!ret) + if (ret) ah->reset_power_on = true; break; case ATH9K_RESET_WARM: -- cgit v1.2.3 From 60ad07ab6bc86f48b6ebda1788d79ca5f88d824c Mon Sep 17 00:00:00 2001 From: Szymon Janc Date: Thu, 25 Oct 2012 17:29:45 +0200 Subject: NFC: pn533: Fix missing lock while operating on commands list In pn533_wq_cmd command was removed from list without cmd_lock held (race with pn533_send_cmd_frame_async) which could lead to list corruption. Delete command from list before releasing lock. Signed-off-by: Szymon Janc Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 97c440a8cd61..328f2b66491e 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -698,13 +698,14 @@ static void pn533_wq_cmd(struct work_struct *work) cmd = list_first_entry(&dev->cmd_queue, struct pn533_cmd, queue); + list_del(&cmd->queue); + mutex_unlock(&dev->cmd_lock); __pn533_send_cmd_frame_async(dev, cmd->out_frame, cmd->in_frame, cmd->in_frame_len, cmd->cmd_complete, cmd->arg, cmd->flags); - list_del(&cmd->queue); kfree(cmd); } -- cgit v1.2.3 From 770f750bc2b8312489c8e45306f551d08a319d3c Mon Sep 17 00:00:00 2001 From: Szymon Janc Date: Mon, 29 Oct 2012 14:04:43 +0100 Subject: NFC: pn533: Fix use after free cmd was freed in pn533_dep_link_up regardless of pn533_send_cmd_frame_async return code. Cmd is passed as argument to pn533_in_dep_link_up_complete callback and should be freed there. Signed-off-by: Szymon Janc Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 328f2b66491e..84a2e77ab5de 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -1820,12 +1820,8 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target, rc = pn533_send_cmd_frame_async(dev, dev->out_frame, dev->in_frame, dev->in_maxlen, pn533_in_dep_link_up_complete, cmd, GFP_KERNEL); - if (rc) - goto out; - - -out: - kfree(cmd); + if (rc < 0) + kfree(cmd); return rc; } -- cgit v1.2.3 From 70418e6efcf4f8652cc08e3f2ab8ae35f0948fd9 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Thu, 11 Oct 2012 14:04:00 +0200 Subject: NFC: pn533: Fix mem leak in pn533_in_dep_link_up cmd is allocated in pn533_dep_link_up and passed as an arg to pn533_send_cmd_frame_async together with a complete cb. arg is passed to the cb and must be kfreed there. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 84a2e77ab5de..807bbb8e82d9 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -1679,11 +1679,14 @@ static void pn533_deactivate_target(struct nfc_dev *nfc_dev, static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg, u8 *params, int params_len) { - struct pn533_cmd_jump_dep *cmd; struct pn533_cmd_jump_dep_response *resp; struct nfc_target nfc_target; u8 target_gt_len; int rc; + struct pn533_cmd_jump_dep *cmd = (struct pn533_cmd_jump_dep *)arg; + u8 active = cmd->active; + + kfree(arg); if (params_len == -ENOENT) { nfc_dev_dbg(&dev->interface->dev, ""); @@ -1705,7 +1708,6 @@ static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg, } resp = (struct pn533_cmd_jump_dep_response *) params; - cmd = (struct pn533_cmd_jump_dep *) arg; rc = resp->status & PN533_CMD_RET_MASK; if (rc != PN533_CMD_RET_SUCCESS) { nfc_dev_err(&dev->interface->dev, @@ -1735,7 +1737,7 @@ static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg, if (rc == 0) rc = nfc_dep_link_is_up(dev->nfc_dev, dev->nfc_dev->targets[0].idx, - !cmd->active, NFC_RF_INITIATOR); + !active, NFC_RF_INITIATOR); return 0; } -- cgit v1.2.3 From 5b412fd11c918171c98a253d8a3484afa9f69ca5 Mon Sep 17 00:00:00 2001 From: Thierry Escande Date: Thu, 15 Nov 2012 18:24:28 +0100 Subject: NFC: Fix pn533 target mode memory leak In target mode, sent sk_buff were not freed in pn533_tm_send_complete Signed-off-by: Thierry Escande Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 807bbb8e82d9..30ae18a03a9c 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -2077,8 +2077,12 @@ error: static int pn533_tm_send_complete(struct pn533 *dev, void *arg, u8 *params, int params_len) { + struct sk_buff *skb_out = arg; + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + dev_kfree_skb(skb_out); + if (params_len < 0) { nfc_dev_err(&dev->interface->dev, "Error %d when sending data", @@ -2116,7 +2120,7 @@ static int pn533_tm_send(struct nfc_dev *nfc_dev, struct sk_buff *skb) rc = pn533_send_cmd_frame_async(dev, out_frame, dev->in_frame, dev->in_maxlen, pn533_tm_send_complete, - NULL, GFP_KERNEL); + skb, GFP_KERNEL); if (rc) { nfc_dev_err(&dev->interface->dev, "Error %d when trying to send data", rc); -- cgit v1.2.3 From ab05613a0646dcc11049692d54bae76ca9ffa910 Mon Sep 17 00:00:00 2001 From: majianpeng Date: Tue, 6 Nov 2012 17:13:44 +0800 Subject: md: Reassigned the parameters if read_seqretry returned true in func md_is_badblock. This bug was introduced by commit(v3.0-rc7-126-g2230dfe). So fix is suitable for 3.0.y thru 3.6.y. Cc: stable@vger.kernel.org Signed-off-by: Jianpeng Ma Signed-off-by: NeilBrown --- drivers/md/md.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 9ab768acfb62..14db6abb2c42 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -7936,9 +7936,9 @@ int md_is_badblock(struct badblocks *bb, sector_t s, int sectors, sector_t *first_bad, int *bad_sectors) { int hi; - int lo = 0; + int lo; u64 *p = bb->page; - int rv = 0; + int rv; sector_t target = s + sectors; unsigned seq; @@ -7953,7 +7953,8 @@ int md_is_badblock(struct badblocks *bb, sector_t s, int sectors, retry: seq = read_seqbegin(&bb->lock); - + lo = 0; + rv = 0; hi = bb->count; /* Binary search between lo and hi for 'target' -- cgit v1.2.3 From 35f9ac2dcec8f79d7059ce174fd7b7ee3290d620 Mon Sep 17 00:00:00 2001 From: majianpeng Date: Thu, 8 Nov 2012 08:56:27 +0800 Subject: md: Avoid write invalid address if read_seqretry returned true. If read_seqretry returned true and bbp was changed, it will write invalid address which can cause some serious problem. This bug was introduced by commit v3.0-rc7-130-g2699b67. So fix is suitable for 3.0.y thru 3.6.y. Reported-by: zhuwenfeng@kedacom.com Tested-by: zhuwenfeng@kedacom.com Cc: stable@vger.kernel.org Signed-off-by: Jianpeng Ma Signed-off-by: NeilBrown --- drivers/md/md.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 14db6abb2c42..4c7d880a60a4 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1817,10 +1817,10 @@ retry: memset(bbp, 0xff, PAGE_SIZE); for (i = 0 ; i < bb->count ; i++) { - u64 internal_bb = *p++; + u64 internal_bb = p[i]; u64 store_bb = ((BB_OFFSET(internal_bb) << 10) | BB_LEN(internal_bb)); - *bbp++ = cpu_to_le64(store_bb); + bbp[i] = cpu_to_le64(store_bb); } bb->changed = 0; if (read_seqretry(&bb->lock, seq)) -- cgit v1.2.3 From 5eff3c439d3478ba9e8ba5f8c0aaf6e6fadb6e58 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 19 Nov 2012 10:47:48 +1100 Subject: md: make sure everything is freed when dm-raid stops an array. md_stop() would stop an array, but not free various attached data structures. For internal arrays, these are freed later in do_md_stop() or mddev_put(), but they don't apply for dm-raid arrays. So get md_stop() to free them, and only all it from dm-raid. For internal arrays we now call __md_stop. Reported-by: majianpeng Signed-off-by: NeilBrown --- drivers/md/md.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 4c7d880a60a4..61200717687b 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5294,7 +5294,7 @@ void md_stop_writes(struct mddev *mddev) } EXPORT_SYMBOL_GPL(md_stop_writes); -void md_stop(struct mddev *mddev) +static void __md_stop(struct mddev *mddev) { mddev->ready = 0; mddev->pers->stop(mddev); @@ -5304,6 +5304,18 @@ void md_stop(struct mddev *mddev) mddev->pers = NULL; clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery); } + +void md_stop(struct mddev *mddev) +{ + /* stop the array and free an attached data structures. + * This is called from dm-raid + */ + __md_stop(mddev); + bitmap_destroy(mddev); + if (mddev->bio_set) + bioset_free(mddev->bio_set); +} + EXPORT_SYMBOL_GPL(md_stop); static int md_set_readonly(struct mddev *mddev, struct block_device *bdev) @@ -5364,7 +5376,7 @@ static int do_md_stop(struct mddev * mddev, int mode, set_disk_ro(disk, 0); __md_stop_writes(mddev); - md_stop(mddev); + __md_stop(mddev); mddev->queue->merge_bvec_fn = NULL; mddev->queue->backing_dev_info.congested_fn = NULL; -- cgit v1.2.3 From 3272dd9b0fe4bc09321219ab65dc5eda3e82445c Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 16 Nov 2012 00:33:59 +0000 Subject: of/net/mdio-gpio: Fix pdev->id issue when using devicetrees. When the mdio-gpio driver is probed via device trees, the platform device id is set as -1, However the pdev->id is re-used as bus-id for while creating mdio gpio bus. So For device tree case the mdio-gpio bus name appears as "gpio-ffffffff" where as for non-device tree case the bus name appears as "gpio-" Which means the bus_id is fixed in device tree case, so we can't have two mdio gpio buses via device trees. Assigning a logical bus number via device tree solves the problem and the bus name is much consistent with non-device tree bus name. Without this patch 1. we can't support two mdio-gpio buses via device trees. 2. we should always pass gpio-ffffffff as bus name to phy_connect, very different to non-device tree bus name. So, setting up the bus_id via aliases from device tree is the right solution and other drivers do similar thing. Signed-off-by: Srinivas Kandagatla Signed-off-by: David S. Miller --- drivers/net/phy/mdio-gpio.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index 899274f2f9b1..2ed1140df3e9 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -185,17 +185,20 @@ static int __devinit mdio_gpio_probe(struct platform_device *pdev) { struct mdio_gpio_platform_data *pdata; struct mii_bus *new_bus; - int ret; + int ret, bus_id; - if (pdev->dev.of_node) + if (pdev->dev.of_node) { pdata = mdio_gpio_of_get_data(pdev); - else + bus_id = of_alias_get_id(pdev->dev.of_node, "mdio-gpio"); + } else { pdata = pdev->dev.platform_data; + bus_id = pdev->id; + } if (!pdata) return -ENODEV; - new_bus = mdio_gpio_bus_init(&pdev->dev, pdata, pdev->id); + new_bus = mdio_gpio_bus_init(&pdev->dev, pdata, bus_id); if (!new_bus) return -ENODEV; -- cgit v1.2.3 From 4ac6875eeb97a49bad7bc8d56b5ec935904fc6e7 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 19 Nov 2012 13:11:26 +1100 Subject: md/raid5: round discard alignment up to power of 2. blkdev_issue_discard currently assumes that the granularity is a power of 2. So in raid5, round the chosen number up to avoid embarrassment. Cc: Shaohua Li Signed-off-by: NeilBrown --- drivers/md/raid5.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index c5439dce0295..baea94f0670a 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -5529,6 +5529,10 @@ static int run(struct mddev *mddev) * discard data disk but write parity disk */ stripe = stripe * PAGE_SIZE; + /* Round up to power of 2, as discard handling + * currently assumes that */ + while ((stripe-1) & stripe) + stripe = (stripe | (stripe-1)) + 1; mddev->queue->limits.discard_alignment = stripe; mddev->queue->limits.discard_granularity = stripe; /* -- cgit v1.2.3 From 78a3c5ab1749cb78eb06b581c3c13d8e027bef40 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 31 Oct 2012 15:54:37 +0100 Subject: mfd: twl-core: Fix chip ID for the twl6030-pwm module The correct chip id is 1 since the PWM module is on address 0x49. With the current TWL6030_MODULE_ID1 the kernel will crash early since we have: #define TWL6030_MODULE_ID1 0x0E and static struct twl_client twl_modules[4]; Down in the stack we try to get the module by: struct twl_client *twl = &twl_modules[chip]; Which is obviously going to do nasty things. Signed-off-by: Peter Ujfalusi Acked-by: Tero Kristo Signed-off-by: Samuel Ortiz --- drivers/mfd/twl-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index 4ae642320205..a071a8643a47 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -671,7 +671,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base, } if (IS_ENABLED(CONFIG_PWM_TWL6030) && twl_class_is_6030()) { - child = add_child(TWL6030_MODULE_ID1, "twl6030-pwm", NULL, 0, + child = add_child(SUB_CHIP_ID1, "twl6030-pwm", NULL, 0, false, 0, 0); if (IS_ERR(child)) return PTR_ERR(child); -- cgit v1.2.3 From d591ad8dcf32b8a71b63041d22a46dd8caf05041 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 20 Nov 2012 13:46:17 +0900 Subject: mfd: wm5102: Update register patch for latest evaluation Latest evaluation of the device has provided some revisions to the configuration. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm5102-tables.c | 519 +------------------------------------------- 1 file changed, 1 insertion(+), 518 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c index 01b9255ed631..14490cc785d2 100644 --- a/drivers/mfd/wm5102-tables.c +++ b/drivers/mfd/wm5102-tables.c @@ -43,6 +43,7 @@ static const struct reg_default wm5102_reva_patch[] = { { 0x479, 0x0A30 }, { 0x47B, 0x0810 }, { 0x47D, 0x0510 }, + { 0x4D1, 0x017F }, { 0x500, 0x000D }, { 0x507, 0x1820 }, { 0x508, 0x1820 }, @@ -52,524 +53,6 @@ static const struct reg_default wm5102_reva_patch[] = { { 0x580, 0x000D }, { 0x587, 0x1820 }, { 0x588, 0x1820 }, - { 0x101, 0x8140 }, - { 0x3000, 0x2225 }, - { 0x3001, 0x3a03 }, - { 0x3002, 0x0225 }, - { 0x3003, 0x0801 }, - { 0x3004, 0x6249 }, - { 0x3005, 0x0c04 }, - { 0x3006, 0x0225 }, - { 0x3007, 0x5901 }, - { 0x3008, 0xe249 }, - { 0x3009, 0x030d }, - { 0x300a, 0x0249 }, - { 0x300b, 0x2c01 }, - { 0x300c, 0xe249 }, - { 0x300d, 0x4342 }, - { 0x300e, 0xe249 }, - { 0x300f, 0x73c0 }, - { 0x3010, 0x4249 }, - { 0x3011, 0x0c00 }, - { 0x3012, 0x0225 }, - { 0x3013, 0x1f01 }, - { 0x3014, 0x0225 }, - { 0x3015, 0x1e01 }, - { 0x3016, 0x0225 }, - { 0x3017, 0xfa00 }, - { 0x3018, 0x0000 }, - { 0x3019, 0xf000 }, - { 0x301a, 0x0000 }, - { 0x301b, 0xf000 }, - { 0x301c, 0x0000 }, - { 0x301d, 0xf000 }, - { 0x301e, 0x0000 }, - { 0x301f, 0xf000 }, - { 0x3020, 0x0000 }, - { 0x3021, 0xf000 }, - { 0x3022, 0x0000 }, - { 0x3023, 0xf000 }, - { 0x3024, 0x0000 }, - { 0x3025, 0xf000 }, - { 0x3026, 0x0000 }, - { 0x3027, 0xf000 }, - { 0x3028, 0x0000 }, - { 0x3029, 0xf000 }, - { 0x302a, 0x0000 }, - { 0x302b, 0xf000 }, - { 0x302c, 0x0000 }, - { 0x302d, 0xf000 }, - { 0x302e, 0x0000 }, - { 0x302f, 0xf000 }, - { 0x3030, 0x0225 }, - { 0x3031, 0x1a01 }, - { 0x3032, 0x0225 }, - { 0x3033, 0x1e00 }, - { 0x3034, 0x0225 }, - { 0x3035, 0x1f00 }, - { 0x3036, 0x6225 }, - { 0x3037, 0xf800 }, - { 0x3038, 0x0000 }, - { 0x3039, 0xf000 }, - { 0x303a, 0x0000 }, - { 0x303b, 0xf000 }, - { 0x303c, 0x0000 }, - { 0x303d, 0xf000 }, - { 0x303e, 0x0000 }, - { 0x303f, 0xf000 }, - { 0x3040, 0x2226 }, - { 0x3041, 0x3a03 }, - { 0x3042, 0x0226 }, - { 0x3043, 0x0801 }, - { 0x3044, 0x6249 }, - { 0x3045, 0x0c06 }, - { 0x3046, 0x0226 }, - { 0x3047, 0x5901 }, - { 0x3048, 0xe249 }, - { 0x3049, 0x030d }, - { 0x304a, 0x0249 }, - { 0x304b, 0x2c01 }, - { 0x304c, 0xe249 }, - { 0x304d, 0x4342 }, - { 0x304e, 0xe249 }, - { 0x304f, 0x73c0 }, - { 0x3050, 0x4249 }, - { 0x3051, 0x0c00 }, - { 0x3052, 0x0226 }, - { 0x3053, 0x1f01 }, - { 0x3054, 0x0226 }, - { 0x3055, 0x1e01 }, - { 0x3056, 0x0226 }, - { 0x3057, 0xfa00 }, - { 0x3058, 0x0000 }, - { 0x3059, 0xf000 }, - { 0x305a, 0x0000 }, - { 0x305b, 0xf000 }, - { 0x305c, 0x0000 }, - { 0x305d, 0xf000 }, - { 0x305e, 0x0000 }, - { 0x305f, 0xf000 }, - { 0x3060, 0x0000 }, - { 0x3061, 0xf000 }, - { 0x3062, 0x0000 }, - { 0x3063, 0xf000 }, - { 0x3064, 0x0000 }, - { 0x3065, 0xf000 }, - { 0x3066, 0x0000 }, - { 0x3067, 0xf000 }, - { 0x3068, 0x0000 }, - { 0x3069, 0xf000 }, - { 0x306a, 0x0000 }, - { 0x306b, 0xf000 }, - { 0x306c, 0x0000 }, - { 0x306d, 0xf000 }, - { 0x306e, 0x0000 }, - { 0x306f, 0xf000 }, - { 0x3070, 0x0226 }, - { 0x3071, 0x1a01 }, - { 0x3072, 0x0226 }, - { 0x3073, 0x1e00 }, - { 0x3074, 0x0226 }, - { 0x3075, 0x1f00 }, - { 0x3076, 0x6226 }, - { 0x3077, 0xf800 }, - { 0x3078, 0x0000 }, - { 0x3079, 0xf000 }, - { 0x307a, 0x0000 }, - { 0x307b, 0xf000 }, - { 0x307c, 0x0000 }, - { 0x307d, 0xf000 }, - { 0x307e, 0x0000 }, - { 0x307f, 0xf000 }, - { 0x3080, 0x2227 }, - { 0x3081, 0x3a03 }, - { 0x3082, 0x0227 }, - { 0x3083, 0x0801 }, - { 0x3084, 0x6255 }, - { 0x3085, 0x0c04 }, - { 0x3086, 0x0227 }, - { 0x3087, 0x5901 }, - { 0x3088, 0xe255 }, - { 0x3089, 0x030d }, - { 0x308a, 0x0255 }, - { 0x308b, 0x2c01 }, - { 0x308c, 0xe255 }, - { 0x308d, 0x4342 }, - { 0x308e, 0xe255 }, - { 0x308f, 0x73c0 }, - { 0x3090, 0x4255 }, - { 0x3091, 0x0c00 }, - { 0x3092, 0x0227 }, - { 0x3093, 0x1f01 }, - { 0x3094, 0x0227 }, - { 0x3095, 0x1e01 }, - { 0x3096, 0x0227 }, - { 0x3097, 0xfa00 }, - { 0x3098, 0x0000 }, - { 0x3099, 0xf000 }, - { 0x309a, 0x0000 }, - { 0x309b, 0xf000 }, - { 0x309c, 0x0000 }, - { 0x309d, 0xf000 }, - { 0x309e, 0x0000 }, - { 0x309f, 0xf000 }, - { 0x30a0, 0x0000 }, - { 0x30a1, 0xf000 }, - { 0x30a2, 0x0000 }, - { 0x30a3, 0xf000 }, - { 0x30a4, 0x0000 }, - { 0x30a5, 0xf000 }, - { 0x30a6, 0x0000 }, - { 0x30a7, 0xf000 }, - { 0x30a8, 0x0000 }, - { 0x30a9, 0xf000 }, - { 0x30aa, 0x0000 }, - { 0x30ab, 0xf000 }, - { 0x30ac, 0x0000 }, - { 0x30ad, 0xf000 }, - { 0x30ae, 0x0000 }, - { 0x30af, 0xf000 }, - { 0x30b0, 0x0227 }, - { 0x30b1, 0x1a01 }, - { 0x30b2, 0x0227 }, - { 0x30b3, 0x1e00 }, - { 0x30b4, 0x0227 }, - { 0x30b5, 0x1f00 }, - { 0x30b6, 0x6227 }, - { 0x30b7, 0xf800 }, - { 0x30b8, 0x0000 }, - { 0x30b9, 0xf000 }, - { 0x30ba, 0x0000 }, - { 0x30bb, 0xf000 }, - { 0x30bc, 0x0000 }, - { 0x30bd, 0xf000 }, - { 0x30be, 0x0000 }, - { 0x30bf, 0xf000 }, - { 0x30c0, 0x2228 }, - { 0x30c1, 0x3a03 }, - { 0x30c2, 0x0228 }, - { 0x30c3, 0x0801 }, - { 0x30c4, 0x6255 }, - { 0x30c5, 0x0c06 }, - { 0x30c6, 0x0228 }, - { 0x30c7, 0x5901 }, - { 0x30c8, 0xe255 }, - { 0x30c9, 0x030d }, - { 0x30ca, 0x0255 }, - { 0x30cb, 0x2c01 }, - { 0x30cc, 0xe255 }, - { 0x30cd, 0x4342 }, - { 0x30ce, 0xe255 }, - { 0x30cf, 0x73c0 }, - { 0x30d0, 0x4255 }, - { 0x30d1, 0x0c00 }, - { 0x30d2, 0x0228 }, - { 0x30d3, 0x1f01 }, - { 0x30d4, 0x0228 }, - { 0x30d5, 0x1e01 }, - { 0x30d6, 0x0228 }, - { 0x30d7, 0xfa00 }, - { 0x30d8, 0x0000 }, - { 0x30d9, 0xf000 }, - { 0x30da, 0x0000 }, - { 0x30db, 0xf000 }, - { 0x30dc, 0x0000 }, - { 0x30dd, 0xf000 }, - { 0x30de, 0x0000 }, - { 0x30df, 0xf000 }, - { 0x30e0, 0x0000 }, - { 0x30e1, 0xf000 }, - { 0x30e2, 0x0000 }, - { 0x30e3, 0xf000 }, - { 0x30e4, 0x0000 }, - { 0x30e5, 0xf000 }, - { 0x30e6, 0x0000 }, - { 0x30e7, 0xf000 }, - { 0x30e8, 0x0000 }, - { 0x30e9, 0xf000 }, - { 0x30ea, 0x0000 }, - { 0x30eb, 0xf000 }, - { 0x30ec, 0x0000 }, - { 0x30ed, 0xf000 }, - { 0x30ee, 0x0000 }, - { 0x30ef, 0xf000 }, - { 0x30f0, 0x0228 }, - { 0x30f1, 0x1a01 }, - { 0x30f2, 0x0228 }, - { 0x30f3, 0x1e00 }, - { 0x30f4, 0x0228 }, - { 0x30f5, 0x1f00 }, - { 0x30f6, 0x6228 }, - { 0x30f7, 0xf800 }, - { 0x30f8, 0x0000 }, - { 0x30f9, 0xf000 }, - { 0x30fa, 0x0000 }, - { 0x30fb, 0xf000 }, - { 0x30fc, 0x0000 }, - { 0x30fd, 0xf000 }, - { 0x30fe, 0x0000 }, - { 0x30ff, 0xf000 }, - { 0x3100, 0x222b }, - { 0x3101, 0x3a03 }, - { 0x3102, 0x222b }, - { 0x3103, 0x5803 }, - { 0x3104, 0xe26f }, - { 0x3105, 0x030d }, - { 0x3106, 0x626f }, - { 0x3107, 0x2c01 }, - { 0x3108, 0xe26f }, - { 0x3109, 0x4342 }, - { 0x310a, 0xe26f }, - { 0x310b, 0x73c0 }, - { 0x310c, 0x026f }, - { 0x310d, 0x0c00 }, - { 0x310e, 0x022b }, - { 0x310f, 0x1f01 }, - { 0x3110, 0x022b }, - { 0x3111, 0x1e01 }, - { 0x3112, 0x022b }, - { 0x3113, 0xfa00 }, - { 0x3114, 0x0000 }, - { 0x3115, 0xf000 }, - { 0x3116, 0x0000 }, - { 0x3117, 0xf000 }, - { 0x3118, 0x0000 }, - { 0x3119, 0xf000 }, - { 0x311a, 0x0000 }, - { 0x311b, 0xf000 }, - { 0x311c, 0x0000 }, - { 0x311d, 0xf000 }, - { 0x311e, 0x0000 }, - { 0x311f, 0xf000 }, - { 0x3120, 0x022b }, - { 0x3121, 0x0a01 }, - { 0x3122, 0x022b }, - { 0x3123, 0x1e00 }, - { 0x3124, 0x022b }, - { 0x3125, 0x1f00 }, - { 0x3126, 0x622b }, - { 0x3127, 0xf800 }, - { 0x3128, 0x0000 }, - { 0x3129, 0xf000 }, - { 0x312a, 0x0000 }, - { 0x312b, 0xf000 }, - { 0x312c, 0x0000 }, - { 0x312d, 0xf000 }, - { 0x312e, 0x0000 }, - { 0x312f, 0xf000 }, - { 0x3130, 0x0000 }, - { 0x3131, 0xf000 }, - { 0x3132, 0x0000 }, - { 0x3133, 0xf000 }, - { 0x3134, 0x0000 }, - { 0x3135, 0xf000 }, - { 0x3136, 0x0000 }, - { 0x3137, 0xf000 }, - { 0x3138, 0x0000 }, - { 0x3139, 0xf000 }, - { 0x313a, 0x0000 }, - { 0x313b, 0xf000 }, - { 0x313c, 0x0000 }, - { 0x313d, 0xf000 }, - { 0x313e, 0x0000 }, - { 0x313f, 0xf000 }, - { 0x3140, 0x0000 }, - { 0x3141, 0xf000 }, - { 0x3142, 0x0000 }, - { 0x3143, 0xf000 }, - { 0x3144, 0x0000 }, - { 0x3145, 0xf000 }, - { 0x3146, 0x0000 }, - { 0x3147, 0xf000 }, - { 0x3148, 0x0000 }, - { 0x3149, 0xf000 }, - { 0x314a, 0x0000 }, - { 0x314b, 0xf000 }, - { 0x314c, 0x0000 }, - { 0x314d, 0xf000 }, - { 0x314e, 0x0000 }, - { 0x314f, 0xf000 }, - { 0x3150, 0x0000 }, - { 0x3151, 0xf000 }, - { 0x3152, 0x0000 }, - { 0x3153, 0xf000 }, - { 0x3154, 0x0000 }, - { 0x3155, 0xf000 }, - { 0x3156, 0x0000 }, - { 0x3157, 0xf000 }, - { 0x3158, 0x0000 }, - { 0x3159, 0xf000 }, - { 0x315a, 0x0000 }, - { 0x315b, 0xf000 }, - { 0x315c, 0x0000 }, - { 0x315d, 0xf000 }, - { 0x315e, 0x0000 }, - { 0x315f, 0xf000 }, - { 0x3160, 0x0000 }, - { 0x3161, 0xf000 }, - { 0x3162, 0x0000 }, - { 0x3163, 0xf000 }, - { 0x3164, 0x0000 }, - { 0x3165, 0xf000 }, - { 0x3166, 0x0000 }, - { 0x3167, 0xf000 }, - { 0x3168, 0x0000 }, - { 0x3169, 0xf000 }, - { 0x316a, 0x0000 }, - { 0x316b, 0xf000 }, - { 0x316c, 0x0000 }, - { 0x316d, 0xf000 }, - { 0x316e, 0x0000 }, - { 0x316f, 0xf000 }, - { 0x3170, 0x0000 }, - { 0x3171, 0xf000 }, - { 0x3172, 0x0000 }, - { 0x3173, 0xf000 }, - { 0x3174, 0x0000 }, - { 0x3175, 0xf000 }, - { 0x3176, 0x0000 }, - { 0x3177, 0xf000 }, - { 0x3178, 0x0000 }, - { 0x3179, 0xf000 }, - { 0x317a, 0x0000 }, - { 0x317b, 0xf000 }, - { 0x317c, 0x0000 }, - { 0x317d, 0xf000 }, - { 0x317e, 0x0000 }, - { 0x317f, 0xf000 }, - { 0x3180, 0x2001 }, - { 0x3181, 0xf101 }, - { 0x3182, 0x0000 }, - { 0x3183, 0xf000 }, - { 0x3184, 0x0000 }, - { 0x3185, 0xf000 }, - { 0x3186, 0x0000 }, - { 0x3187, 0xf000 }, - { 0x3188, 0x0000 }, - { 0x3189, 0xf000 }, - { 0x318a, 0x0000 }, - { 0x318b, 0xf000 }, - { 0x318c, 0x0000 }, - { 0x318d, 0xf000 }, - { 0x318e, 0x0000 }, - { 0x318f, 0xf000 }, - { 0x3190, 0x0000 }, - { 0x3191, 0xf000 }, - { 0x3192, 0x0000 }, - { 0x3193, 0xf000 }, - { 0x3194, 0x0000 }, - { 0x3195, 0xf000 }, - { 0x3196, 0x0000 }, - { 0x3197, 0xf000 }, - { 0x3198, 0x0000 }, - { 0x3199, 0xf000 }, - { 0x319a, 0x0000 }, - { 0x319b, 0xf000 }, - { 0x319c, 0x0000 }, - { 0x319d, 0xf000 }, - { 0x319e, 0x0000 }, - { 0x319f, 0xf000 }, - { 0x31a0, 0x0000 }, - { 0x31a1, 0xf000 }, - { 0x31a2, 0x0000 }, - { 0x31a3, 0xf000 }, - { 0x31a4, 0x0000 }, - { 0x31a5, 0xf000 }, - { 0x31a6, 0x0000 }, - { 0x31a7, 0xf000 }, - { 0x31a8, 0x0000 }, - { 0x31a9, 0xf000 }, - { 0x31aa, 0x0000 }, - { 0x31ab, 0xf000 }, - { 0x31ac, 0x0000 }, - { 0x31ad, 0xf000 }, - { 0x31ae, 0x0000 }, - { 0x31af, 0xf000 }, - { 0x31b0, 0x0000 }, - { 0x31b1, 0xf000 }, - { 0x31b2, 0x0000 }, - { 0x31b3, 0xf000 }, - { 0x31b4, 0x0000 }, - { 0x31b5, 0xf000 }, - { 0x31b6, 0x0000 }, - { 0x31b7, 0xf000 }, - { 0x31b8, 0x0000 }, - { 0x31b9, 0xf000 }, - { 0x31ba, 0x0000 }, - { 0x31bb, 0xf000 }, - { 0x31bc, 0x0000 }, - { 0x31bd, 0xf000 }, - { 0x31be, 0x0000 }, - { 0x31bf, 0xf000 }, - { 0x31c0, 0x0000 }, - { 0x31c1, 0xf000 }, - { 0x31c2, 0x0000 }, - { 0x31c3, 0xf000 }, - { 0x31c4, 0x0000 }, - { 0x31c5, 0xf000 }, - { 0x31c6, 0x0000 }, - { 0x31c7, 0xf000 }, - { 0x31c8, 0x0000 }, - { 0x31c9, 0xf000 }, - { 0x31ca, 0x0000 }, - { 0x31cb, 0xf000 }, - { 0x31cc, 0x0000 }, - { 0x31cd, 0xf000 }, - { 0x31ce, 0x0000 }, - { 0x31cf, 0xf000 }, - { 0x31d0, 0x0000 }, - { 0x31d1, 0xf000 }, - { 0x31d2, 0x0000 }, - { 0x31d3, 0xf000 }, - { 0x31d4, 0x0000 }, - { 0x31d5, 0xf000 }, - { 0x31d6, 0x0000 }, - { 0x31d7, 0xf000 }, - { 0x31d8, 0x0000 }, - { 0x31d9, 0xf000 }, - { 0x31da, 0x0000 }, - { 0x31db, 0xf000 }, - { 0x31dc, 0x0000 }, - { 0x31dd, 0xf000 }, - { 0x31de, 0x0000 }, - { 0x31df, 0xf000 }, - { 0x31e0, 0x0000 }, - { 0x31e1, 0xf000 }, - { 0x31e2, 0x0000 }, - { 0x31e3, 0xf000 }, - { 0x31e4, 0x0000 }, - { 0x31e5, 0xf000 }, - { 0x31e6, 0x0000 }, - { 0x31e7, 0xf000 }, - { 0x31e8, 0x0000 }, - { 0x31e9, 0xf000 }, - { 0x31ea, 0x0000 }, - { 0x31eb, 0xf000 }, - { 0x31ec, 0x0000 }, - { 0x31ed, 0xf000 }, - { 0x31ee, 0x0000 }, - { 0x31ef, 0xf000 }, - { 0x31f0, 0x0000 }, - { 0x31f1, 0xf000 }, - { 0x31f2, 0x0000 }, - { 0x31f3, 0xf000 }, - { 0x31f4, 0x0000 }, - { 0x31f5, 0xf000 }, - { 0x31f6, 0x0000 }, - { 0x31f7, 0xf000 }, - { 0x31f8, 0x0000 }, - { 0x31f9, 0xf000 }, - { 0x31fa, 0x0000 }, - { 0x31fb, 0xf000 }, - { 0x31fc, 0x0000 }, - { 0x31fd, 0xf000 }, - { 0x31fe, 0x0000 }, - { 0x31ff, 0xf000 }, - { 0x024d, 0xff50 }, - { 0x0252, 0xff50 }, - { 0x0259, 0x0112 }, - { 0x025e, 0x0112 }, - { 0x101, 0x0304 }, { 0x80, 0x0000 }, }; -- cgit v1.2.3 From 944b058258da8a40c13300f374dbfc2617a9190d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 20 Nov 2012 13:46:18 +0900 Subject: mfd: wm5110: Disable control interface error report for WM5110 rev B It can misreport. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/arizona-irq.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c index ef0f2d001df2..b1b009177405 100644 --- a/drivers/mfd/arizona-irq.c +++ b/drivers/mfd/arizona-irq.c @@ -178,6 +178,7 @@ int arizona_irq_init(struct arizona *arizona) switch (arizona->rev) { case 0: + case 1: ctrlif_error = false; break; default: -- cgit v1.2.3 From 78566afd8647654b2fb11c3ae13b3d8fe96a8cfe Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 20 Nov 2012 13:46:19 +0900 Subject: mfd: arizona: Use correct array for ARRAY_SIZE in mfd_add_devices call wm5102_devs array was used for ARRAY_SIZE whilst adding the wm5110 devices. This change corrects this to get the size from the wm5110_devs array. As both arrays are the same size no issues should have been caused by this bug. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/arizona-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index 1b48f2094806..166254bba4c2 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -520,7 +520,7 @@ int __devinit arizona_dev_init(struct arizona *arizona) break; case WM5110: ret = mfd_add_devices(arizona->dev, -1, wm5110_devs, - ARRAY_SIZE(wm5102_devs), NULL, 0, NULL); + ARRAY_SIZE(wm5110_devs), NULL, 0, NULL); break; } -- cgit v1.2.3 From 3ebef34d5cf658752d000001d2a6a5defe8cf3a9 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 20 Nov 2012 13:46:20 +0900 Subject: mfd: arizona: Correctly report when AIF2/AIF1 is underclocked In the interrupt handler for an underclocked event, whilst checking for the source of the interrupt, AIF3 was checked twice and AIF1 was not checked. This change correctly checks the AIF1 underclocked bit and reports the correct error messages for all cases. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/arizona-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index 166254bba4c2..202bf55c3cc9 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -96,11 +96,11 @@ static irqreturn_t arizona_underclocked(int irq, void *data) return IRQ_NONE; } - if (val & ARIZONA_AIF3_UNDERCLOCKED_STS) - dev_err(arizona->dev, "AIF3 underclocked\n"); if (val & ARIZONA_AIF3_UNDERCLOCKED_STS) dev_err(arizona->dev, "AIF3 underclocked\n"); if (val & ARIZONA_AIF2_UNDERCLOCKED_STS) + dev_err(arizona->dev, "AIF2 underclocked\n"); + if (val & ARIZONA_AIF1_UNDERCLOCKED_STS) dev_err(arizona->dev, "AIF1 underclocked\n"); if (val & ARIZONA_ISRC2_UNDERCLOCKED_STS) dev_err(arizona->dev, "ISRC2 underclocked\n"); -- cgit v1.2.3 From 46b9d13aaec19dfbd5882a999e8ed85fc97a751e Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 20 Nov 2012 14:49:10 +0900 Subject: mfd: arizona: Sync regcache after reset In the absence of a physical reset line the chip is reset by writing the first register, which is done after the register patch has been applied. This patch synchronises the register cache after the reset to preserve any register changes that had been applied. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/arizona-core.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index 202bf55c3cc9..f4f9bf84bc7b 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -415,11 +415,19 @@ int __devinit arizona_dev_init(struct arizona *arizona) /* If we have a /RESET GPIO we'll already be reset */ if (!arizona->pdata.reset) { + regcache_mark_dirty(arizona->regmap); + ret = regmap_write(arizona->regmap, ARIZONA_SOFTWARE_RESET, 0); if (ret != 0) { dev_err(dev, "Failed to reset device: %d\n", ret); goto err_reset; } + + ret = regcache_sync(arizona->regmap); + if (ret != 0) { + dev_err(dev, "Failed to sync device: %d\n", ret); + goto err_reset; + } } ret = arizona_wait_for_boot(arizona); -- cgit v1.2.3 From e506d6fde50e0a737234892eda31708692bdda29 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 13 Nov 2012 17:24:43 +0100 Subject: drm/i915: disable cloning on sdvo After the recent pile of disable-cloning patches, e.g. commit e3b86d6941c7e5f90be05d986fce1fcb40c68d6b Author: Egbert Eich Date: Sat Oct 13 14:30:15 2012 +0200 DRM/i915: Don't clone SDVO LVDS with analog and a bug report from Chris Wilson indicating that cloning doesn't even work for DVI-SDVO and native VGA, let's just disable cloning on sdvo encoders completely. v2: Update the comment in the code as discussed with Paulo Zanoni. Reviewed-by: Paulo Zanoni Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29259 Tested-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sdvo.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index c600fb06e25e..a6ac0b416964 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2201,7 +2201,6 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device) connector->connector_type = DRM_MODE_CONNECTOR_HDMIA; intel_sdvo->is_hdmi = true; } - intel_sdvo->base.cloneable = true; intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo); if (intel_sdvo->is_hdmi) @@ -2232,7 +2231,6 @@ intel_sdvo_tv_init(struct intel_sdvo *intel_sdvo, int type) intel_sdvo->is_tv = true; intel_sdvo->base.needs_tv_clock = true; - intel_sdvo->base.cloneable = false; intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo); @@ -2275,8 +2273,6 @@ intel_sdvo_analog_init(struct intel_sdvo *intel_sdvo, int device) intel_sdvo_connector->output_flag = SDVO_OUTPUT_RGB1; } - intel_sdvo->base.cloneable = true; - intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo); return true; @@ -2307,9 +2303,6 @@ intel_sdvo_lvds_init(struct intel_sdvo *intel_sdvo, int device) intel_sdvo_connector->output_flag = SDVO_OUTPUT_LVDS1; } - /* SDVO LVDS is not cloneable because the input mode gets adjusted by the encoder */ - intel_sdvo->base.cloneable = false; - intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo); if (!intel_sdvo_create_enhance_property(intel_sdvo, intel_sdvo_connector)) goto err; @@ -2721,6 +2714,16 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) goto err_output; } + /* + * Cloning SDVO with anything is often impossible, since the SDVO + * encoder can request a special input timing mode. And even if that's + * not the case we have evidence that cloning a plain unscaled mode with + * VGA doesn't really work. Furthermore the cloning flags are way too + * simplistic anyway to express such constraints, so just give up on + * cloning for SDVO encoders. + */ + intel_sdvo->base.cloneable = false; + /* Only enable the hotplug irq if we need it, to work around noisy * hotplug lines. */ -- cgit v1.2.3 From 804cc4a0ad3a896ca295f771a28c6eb36ced7903 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 19 Nov 2012 09:11:27 -0500 Subject: drm/radeon: properly track the crtc not_enabled case evergreen_mc_stop() The save struct is not initialized previously so explicitly mark the crtcs as not used when they are not in use. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/evergreen.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index af31f829f4a8..219942c660d7 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -1330,6 +1330,8 @@ void evergreen_mc_stop(struct radeon_device *rdev, struct evergreen_mc_save *sav break; udelay(1); } + } else { + save->crtc_enabled[i] = false; } } -- cgit v1.2.3 From 45171002b01b2e2ec4f991eca81ffd8430fd0aec Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 19 Nov 2012 21:17:31 +0100 Subject: radeon: add AGPMode 1 quirk for RV250 The Intel 82855PM host bridge / Mobility FireGL 9000 RV250 combination in an (outdated) ThinkPad T41 needs AGPMode 1 for suspend/resume (under KMS, that is). So add a quirk for it. (Change R250 to RV250 in comment for preceding quirk too.) Signed-off-by: Paul Bolle Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_agp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_agp.c b/drivers/gpu/drm/radeon/radeon_agp.c index 10ea17a6b2a6..42433344cb1b 100644 --- a/drivers/gpu/drm/radeon/radeon_agp.c +++ b/drivers/gpu/drm/radeon/radeon_agp.c @@ -69,9 +69,12 @@ static struct radeon_agpmode_quirk radeon_agpmode_quirk_list[] = { /* Intel 82830 830 Chipset Host Bridge / Mobility M6 LY Needs AGPMode 2 (fdo #17360)*/ { PCI_VENDOR_ID_INTEL, 0x3575, PCI_VENDOR_ID_ATI, 0x4c59, PCI_VENDOR_ID_DELL, 0x00e3, 2}, - /* Intel 82852/82855 host bridge / Mobility FireGL 9000 R250 Needs AGPMode 1 (lp #296617) */ + /* Intel 82852/82855 host bridge / Mobility FireGL 9000 RV250 Needs AGPMode 1 (lp #296617) */ { PCI_VENDOR_ID_INTEL, 0x3580, PCI_VENDOR_ID_ATI, 0x4c66, PCI_VENDOR_ID_DELL, 0x0149, 1}, + /* Intel 82855PM host bridge / Mobility FireGL 9000 RV250 Needs AGPMode 1 for suspend/resume */ + { PCI_VENDOR_ID_INTEL, 0x3340, PCI_VENDOR_ID_ATI, 0x4c66, + PCI_VENDOR_ID_IBM, 0x0531, 1}, /* Intel 82852/82855 host bridge / Mobility 9600 M10 RV350 Needs AGPMode 1 (deb #467460) */ { PCI_VENDOR_ID_INTEL, 0x3580, PCI_VENDOR_ID_ATI, 0x4e50, 0x1025, 0x0061, 1}, -- cgit v1.2.3 From da9da01d9199b5bb15289d0859053c9aa3a34ac0 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 20 Nov 2012 06:31:57 +0000 Subject: ne2000: add the right platform device Without this udev doesn't have a way to key the ne device to the platform device. Signed-off-by: Alan Cox Signed-off-by: David S. Miller --- drivers/net/ethernet/8390/ne.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/8390/ne.c b/drivers/net/ethernet/8390/ne.c index d04911d33b64..47618e505355 100644 --- a/drivers/net/ethernet/8390/ne.c +++ b/drivers/net/ethernet/8390/ne.c @@ -813,6 +813,7 @@ static int __init ne_drv_probe(struct platform_device *pdev) dev->irq = irq[this_dev]; dev->mem_end = bad[this_dev]; } + SET_NETDEV_DEV(dev, &pdev->dev); err = do_ne_probe(dev); if (err) { free_netdev(dev); -- cgit v1.2.3 From 1a4901177574083c35fafc24c4d151c2a7c7647c Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Sat, 17 Nov 2012 20:25:09 +0000 Subject: ixp4xx_eth: avoid calling dma_pool_create() with NULL dev Use &port->netdev->dev instead of NULL since dma_pool_create() doesn't allow NULL dev. Signed-off-by: Xi Wang Cc: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/ethernet/xscale/ixp4xx_eth.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c index 98934bdf6acf..477d6729b17f 100644 --- a/drivers/net/ethernet/xscale/ixp4xx_eth.c +++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c @@ -1102,10 +1102,12 @@ static int init_queues(struct port *port) { int i; - if (!ports_open) - if (!(dma_pool = dma_pool_create(DRV_NAME, NULL, - POOL_ALLOC_SIZE, 32, 0))) + if (!ports_open) { + dma_pool = dma_pool_create(DRV_NAME, &port->netdev->dev, + POOL_ALLOC_SIZE, 32, 0); + if (!dma_pool) return -ENOMEM; + } if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL, &port->desc_tab_phys))) -- cgit v1.2.3 From 3e2f61cd7a4e7642dcac4371734426e572f10370 Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Sat, 17 Nov 2012 20:25:10 +0000 Subject: ixp4xx_hss: avoid calling dma_pool_create() with NULL dev Use &port->netdev->dev instead of NULL since dma_pool_create() doesn't allow NULL dev. Signed-off-by: Xi Wang Cc: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/wan/ixp4xx_hss.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c index 3f575afd8cfc..e9a3da588e95 100644 --- a/drivers/net/wan/ixp4xx_hss.c +++ b/drivers/net/wan/ixp4xx_hss.c @@ -969,10 +969,12 @@ static int init_hdlc_queues(struct port *port) { int i; - if (!ports_open) - if (!(dma_pool = dma_pool_create(DRV_NAME, NULL, - POOL_ALLOC_SIZE, 32, 0))) + if (!ports_open) { + dma_pool = dma_pool_create(DRV_NAME, &port->netdev->dev, + POOL_ALLOC_SIZE, 32, 0); + if (!dma_pool) return -ENOMEM; + } if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL, &port->desc_tab_phys))) -- cgit v1.2.3 From 2355a62bcbdcc4b567425bab036bfab6ade87eed Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Tue, 20 Nov 2012 09:59:11 +0000 Subject: irda: sir_dev: Fix copy/paste typo Signed-off-by: Alexander Shiyan Signed-off-by: David S. Miller --- drivers/net/irda/sir_dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c index 5039f08f5a5b..43e9ab4f4d7e 100644 --- a/drivers/net/irda/sir_dev.c +++ b/drivers/net/irda/sir_dev.c @@ -222,7 +222,7 @@ static void sirdev_config_fsm(struct work_struct *work) break; case SIRDEV_STATE_DONGLE_SPEED: - if (dev->dongle_drv->reset) { + if (dev->dongle_drv->set_speed) { ret = dev->dongle_drv->set_speed(dev, fsm->param); if (ret < 0) { fsm->result = ret; -- cgit v1.2.3 From aecb55be41b1bab432e81d550ebce010e7d178c6 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Tue, 20 Nov 2012 10:23:13 +0000 Subject: net: fix build failure in xilinx Commit 71c6c837 (drivers/net: fix tasklet misuse issue) introduced a build failure in the xilinx driver. axienet_dma_err_handler isn't declared before its use in axienet_open. This patch provides the prototype before axienet_open. Cc: Xiaotian Feng Signed-off-by: Jeff Mahoney Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 77e6db9dcfed..a788501e978e 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -894,6 +894,8 @@ out: return IRQ_HANDLED; } +static void axienet_dma_err_handler(unsigned long data); + /** * axienet_open - Driver open routine. * @ndev: Pointer to net_device structure -- cgit v1.2.3 From 68fa965dd923177eafad49b7a0045fc610917341 Mon Sep 17 00:00:00 2001 From: Mats Petersson Date: Fri, 16 Nov 2012 18:36:49 +0000 Subject: xen/privcmd: Correctly return success from IOCTL_PRIVCMD_MMAPBATCH This is a regression introduced by ceb90fa0 (xen/privcmd: add PRIVCMD_MMAPBATCH_V2 ioctl). It broke xentrace as it used xc_map_foreign() instead of xc_map_foreign_bulk(). Most code-paths prefer the MMAPBATCH_V2, so this wasn't very obvious that it broke. The return value is set early on to -EINVAL, and if all goes well, the "set top bits of the MFN's" never gets called, so the return value is still EINVAL when the function gets to the end, causing the caller to think it went wrong (which it didn't!) Now also including Andres "move the ret = -EINVAL into the error handling path, as this avoids other similar errors in future. Signed-off-by: Mats Petersson Acked-by: Andres Lagar-Cavilla Acked-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/privcmd.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c index 8adb9cc267f9..71f5c459b088 100644 --- a/drivers/xen/privcmd.c +++ b/drivers/xen/privcmd.c @@ -361,13 +361,13 @@ static long privcmd_ioctl_mmap_batch(void __user *udata, int version) down_write(&mm->mmap_sem); vma = find_vma(mm, m.addr); - ret = -EINVAL; if (!vma || vma->vm_ops != &privcmd_vm_ops || (m.addr != vma->vm_start) || ((m.addr + (nr_pages << PAGE_SHIFT)) != vma->vm_end) || !privcmd_enforce_singleshot_mapping(vma)) { up_write(&mm->mmap_sem); + ret = -EINVAL; goto out; } @@ -383,12 +383,16 @@ static long privcmd_ioctl_mmap_batch(void __user *udata, int version) up_write(&mm->mmap_sem); - if (state.global_error && (version == 1)) { - /* Write back errors in second pass. */ - state.user_mfn = (xen_pfn_t *)m.arr; - state.err = err_array; - ret = traverse_pages(m.num, sizeof(xen_pfn_t), - &pagelist, mmap_return_errors_v1, &state); + if (version == 1) { + if (state.global_error) { + /* Write back errors in second pass. */ + state.user_mfn = (xen_pfn_t *)m.arr; + state.err = err_array; + ret = traverse_pages(m.num, sizeof(xen_pfn_t), + &pagelist, mmap_return_errors_v1, &state); + } else + ret = 0; + } else if (version == 2) { ret = __copy_to_user(m.err, err_array, m.num * sizeof(int)); if (ret) -- cgit v1.2.3 From 5edd0b946a0afeb1d0364a3654328b046fb818a2 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 20 Nov 2012 16:31:25 +0200 Subject: iwlwifi: fix the basic CCK rates calculation Fix a copy paste error in iwl_calc_basic_rates which leads to a wrong calculation of CCK basic rates. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/rxon.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/dvm/rxon.c b/drivers/net/wireless/iwlwifi/dvm/rxon.c index 10896393e5a0..2830ea290502 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rxon.c +++ b/drivers/net/wireless/iwlwifi/dvm/rxon.c @@ -1012,12 +1012,12 @@ static void iwl_calc_basic_rates(struct iwl_priv *priv, * As a consequence, it's not as complicated as it sounds, just add * any lower rates to the ACK rate bitmap. */ - if (IWL_RATE_11M_INDEX < lowest_present_ofdm) - ofdm |= IWL_RATE_11M_MASK >> IWL_FIRST_CCK_RATE; - if (IWL_RATE_5M_INDEX < lowest_present_ofdm) - ofdm |= IWL_RATE_5M_MASK >> IWL_FIRST_CCK_RATE; - if (IWL_RATE_2M_INDEX < lowest_present_ofdm) - ofdm |= IWL_RATE_2M_MASK >> IWL_FIRST_CCK_RATE; + if (IWL_RATE_11M_INDEX < lowest_present_cck) + cck |= IWL_RATE_11M_MASK >> IWL_FIRST_CCK_RATE; + if (IWL_RATE_5M_INDEX < lowest_present_cck) + cck |= IWL_RATE_5M_MASK >> IWL_FIRST_CCK_RATE; + if (IWL_RATE_2M_INDEX < lowest_present_cck) + cck |= IWL_RATE_2M_MASK >> IWL_FIRST_CCK_RATE; /* 1M already there or needed so always add */ cck |= IWL_RATE_1M_MASK >> IWL_FIRST_CCK_RATE; -- cgit v1.2.3 From 8b41669ceba0c2d4c09d69ccb9a3458953dae784 Mon Sep 17 00:00:00 2001 From: Kalle Jokiniemi Date: Tue, 16 Oct 2012 17:59:35 +0300 Subject: mfd: twl4030: Fix chained irq handling on resume from suspend The irqs are enabled one-by-one in pm core resume_noirq phase. This leads to situation where the twl4030 primary interrupt handler (PIH) is enabled before the chained secondary handlers (SIH). As the PIH cannot clear the pending interrupt, and SIHs have not been enabled yet, a flood of interrupts hangs the device. Fixed the issue by setting the SIH irqs with IRQF_EARLY_RESUME flags, so they get enabled before the PIH. Signed-off-by: Kalle Jokiniemi Acked-by: Kevin Hilman Signed-off-by: Samuel Ortiz --- drivers/mfd/twl4030-irq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index ad733d76207a..cdd1173ed4e9 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -672,7 +672,8 @@ int twl4030_sih_setup(struct device *dev, int module, int irq_base) irq = sih_mod + twl4030_irq_base; irq_set_handler_data(irq, agent); agent->irq_name = kasprintf(GFP_KERNEL, "twl4030_%s", sih->name); - status = request_threaded_irq(irq, NULL, handle_twl4030_sih, 0, + status = request_threaded_irq(irq, NULL, handle_twl4030_sih, + IRQF_EARLY_RESUME, agent->irq_name ?: sih->name, NULL); dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", sih->name, -- cgit v1.2.3 From f36c374782e40a3812f729838b5b80d2ce601725 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 21 Nov 2012 02:02:16 +0000 Subject: xen/netfront: handle compound page fragments on transmit An SKB paged fragment can consist of a compound page with order > 0. However the netchannel protocol deals only in PAGE_SIZE frames. Handle this in xennet_make_frags by iterating over the frames which make up the page. This is the netfront equivalent to 6a8ed462f16b for netback. Signed-off-by: Ian Campbell Cc: netdev@vger.kernel.org Cc: xen-devel@lists.xen.org Cc: Eric Dumazet Cc: Konrad Rzeszutek Wilk Cc: ANNIE LI Cc: Sander Eikelenboom Cc: Stefan Bader Acked-by: Eric Dumazet Acked-by: Konrad Rzeszutek Wilk Signed-off-by: David S. Miller --- drivers/net/xen-netfront.c | 98 ++++++++++++++++++++++++++++++++++++---------- 1 file changed, 77 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index caa011008cd0..fc24eb9b3948 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -452,29 +452,85 @@ static void xennet_make_frags(struct sk_buff *skb, struct net_device *dev, /* Grant backend access to each skb fragment page. */ for (i = 0; i < frags; i++) { skb_frag_t *frag = skb_shinfo(skb)->frags + i; + struct page *page = skb_frag_page(frag); - tx->flags |= XEN_NETTXF_more_data; + len = skb_frag_size(frag); + offset = frag->page_offset; - id = get_id_from_freelist(&np->tx_skb_freelist, np->tx_skbs); - np->tx_skbs[id].skb = skb_get(skb); - tx = RING_GET_REQUEST(&np->tx, prod++); - tx->id = id; - ref = gnttab_claim_grant_reference(&np->gref_tx_head); - BUG_ON((signed short)ref < 0); + /* Data must not cross a page boundary. */ + BUG_ON(len + offset > PAGE_SIZE<xbdev->otherend_id, - mfn, GNTMAP_readonly); + /* Skip unused frames from start of page */ + page += offset >> PAGE_SHIFT; + offset &= ~PAGE_MASK; - tx->gref = np->grant_tx_ref[id] = ref; - tx->offset = frag->page_offset; - tx->size = skb_frag_size(frag); - tx->flags = 0; + while (len > 0) { + unsigned long bytes; + + BUG_ON(offset >= PAGE_SIZE); + + bytes = PAGE_SIZE - offset; + if (bytes > len) + bytes = len; + + tx->flags |= XEN_NETTXF_more_data; + + id = get_id_from_freelist(&np->tx_skb_freelist, + np->tx_skbs); + np->tx_skbs[id].skb = skb_get(skb); + tx = RING_GET_REQUEST(&np->tx, prod++); + tx->id = id; + ref = gnttab_claim_grant_reference(&np->gref_tx_head); + BUG_ON((signed short)ref < 0); + + mfn = pfn_to_mfn(page_to_pfn(page)); + gnttab_grant_foreign_access_ref(ref, + np->xbdev->otherend_id, + mfn, GNTMAP_readonly); + + tx->gref = np->grant_tx_ref[id] = ref; + tx->offset = offset; + tx->size = bytes; + tx->flags = 0; + + offset += bytes; + len -= bytes; + + /* Next frame */ + if (offset == PAGE_SIZE && len) { + BUG_ON(!PageCompound(page)); + page++; + offset = 0; + } + } } np->tx.req_prod_pvt = prod; } +/* + * Count how many ring slots are required to send the frags of this + * skb. Each frag might be a compound page. + */ +static int xennet_count_skb_frag_slots(struct sk_buff *skb) +{ + int i, frags = skb_shinfo(skb)->nr_frags; + int pages = 0; + + for (i = 0; i < frags; i++) { + skb_frag_t *frag = skb_shinfo(skb)->frags + i; + unsigned long size = skb_frag_size(frag); + unsigned long offset = frag->page_offset; + + /* Skip unused frames from start of page */ + offset &= ~PAGE_MASK; + + pages += PFN_UP(offset + size); + } + + return pages; +} + static int xennet_start_xmit(struct sk_buff *skb, struct net_device *dev) { unsigned short id; @@ -487,23 +543,23 @@ static int xennet_start_xmit(struct sk_buff *skb, struct net_device *dev) grant_ref_t ref; unsigned long mfn; int notify; - int frags = skb_shinfo(skb)->nr_frags; + int slots; unsigned int offset = offset_in_page(data); unsigned int len = skb_headlen(skb); unsigned long flags; - frags += DIV_ROUND_UP(offset + len, PAGE_SIZE); - if (unlikely(frags > MAX_SKB_FRAGS + 1)) { - printk(KERN_ALERT "xennet: skb rides the rocket: %d frags\n", - frags); - dump_stack(); + slots = DIV_ROUND_UP(offset + len, PAGE_SIZE) + + xennet_count_skb_frag_slots(skb); + if (unlikely(slots > MAX_SKB_FRAGS + 1)) { + net_alert_ratelimited( + "xennet: skb rides the rocket: %d slots\n", slots); goto drop; } spin_lock_irqsave(&np->tx_lock, flags); if (unlikely(!netif_carrier_ok(dev) || - (frags > 1 && !xennet_can_sg(dev)) || + (slots > 1 && !xennet_can_sg(dev)) || netif_needs_gso(skb, netif_skb_features(skb)))) { spin_unlock_irqrestore(&np->tx_lock, flags); goto drop; -- cgit v1.2.3 From 0e376bd0b791ac6ac6bdb051492df0769c840848 Mon Sep 17 00:00:00 2001 From: Sarveshwar Bandi Date: Wed, 21 Nov 2012 04:35:03 +0000 Subject: bonding: Bonding driver does not consider the gso_max_size/gso_max_segs setting of slave devices. Patch sets the lowest gso_max_size and gso_max_segs values of the slave devices during enslave and detach. Signed-off-by: Sarveshwar Bandi Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index b2530b002125..5f5b69f37d2e 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1379,6 +1379,8 @@ static void bond_compute_features(struct bonding *bond) struct net_device *bond_dev = bond->dev; netdev_features_t vlan_features = BOND_VLAN_FEATURES; unsigned short max_hard_header_len = ETH_HLEN; + unsigned int gso_max_size = GSO_MAX_SIZE; + u16 gso_max_segs = GSO_MAX_SEGS; int i; unsigned int flags, dst_release_flag = IFF_XMIT_DST_RELEASE; @@ -1394,11 +1396,16 @@ static void bond_compute_features(struct bonding *bond) dst_release_flag &= slave->dev->priv_flags; if (slave->dev->hard_header_len > max_hard_header_len) max_hard_header_len = slave->dev->hard_header_len; + + gso_max_size = min(gso_max_size, slave->dev->gso_max_size); + gso_max_segs = min(gso_max_segs, slave->dev->gso_max_segs); } done: bond_dev->vlan_features = vlan_features; bond_dev->hard_header_len = max_hard_header_len; + bond_dev->gso_max_segs = gso_max_segs; + netif_set_gso_max_size(bond_dev, gso_max_size); flags = bond_dev->priv_flags & ~IFF_XMIT_DST_RELEASE; bond_dev->priv_flags = flags | dst_release_flag; -- cgit v1.2.3 From 403f43c937d24832b18524f65415c0bbba6b5064 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 21 Nov 2012 02:34:45 +0000 Subject: team: bcast: convert return value of team_dev_queue_xmit() to bool correctly The thing is that team_dev_queue_xmit() returns NET_XMIT_* or -E*. bc_trasmit() should return true in case all went well. So use ! to get correct retval from team_dev_queue_xmit() result. This bug caused iface statistics to be badly computed. This bug was introduced by: team: add broadcast mode (5fc889911a99043a97da1daa0d010ad72cbc3042) Reported-by: Dan Carpenter Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/team/team_mode_broadcast.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/team/team_mode_broadcast.c b/drivers/net/team/team_mode_broadcast.c index 9db0171e9366..c5db428e73fa 100644 --- a/drivers/net/team/team_mode_broadcast.c +++ b/drivers/net/team/team_mode_broadcast.c @@ -29,8 +29,8 @@ static bool bc_transmit(struct team *team, struct sk_buff *skb) if (last) { skb2 = skb_clone(skb, GFP_ATOMIC); if (skb2) { - ret = team_dev_queue_xmit(team, last, - skb2); + ret = !team_dev_queue_xmit(team, last, + skb2); if (!sum_ret) sum_ret = ret; } @@ -39,7 +39,7 @@ static bool bc_transmit(struct team *team, struct sk_buff *skb) } } if (last) { - ret = team_dev_queue_xmit(team, last, skb); + ret = !team_dev_queue_xmit(team, last, skb); if (!sum_ret) sum_ret = ret; } -- cgit v1.2.3 From 809396474f41fb6e7e676e298d79856c5e02d755 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 16 Oct 2012 05:46:21 -0300 Subject: [media] adv7604: cleanup references Signed-off-by: Mats Randgaard Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/adv7604.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c index 109bc9b12e74..75a8395b8992 100644 --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -1123,7 +1123,7 @@ static int adv7604_query_dv_timings(struct v4l2_subdev *sd, adv7604_fill_optional_dv_timings_fields(sd, timings); } else { /* find format - * Since LCVS values are inaccurate (REF_03, page 275-276), + * Since LCVS values are inaccurate [REF_03, p. 275-276], * stdi2dv_timings() is called with lcvs +-1 if the first attempt fails. */ if (!stdi2dv_timings(sd, &stdi, timings)) @@ -1712,9 +1712,9 @@ static int adv7604_core_init(struct v4l2_subdev *sd) cp_write(sd, 0xba, (pdata->hdmi_free_run_mode << 1) | 0x01); /* HDMI free run */ cp_write(sd, 0xf3, 0xdc); /* Low threshold to enter/exit free run mode */ cp_write(sd, 0xf9, 0x23); /* STDI ch. 1 - LCVS change threshold - - ADI recommended setting [REF_01 c. 2.3.3] */ + ADI recommended setting [REF_01, c. 2.3.3] */ cp_write(sd, 0x45, 0x23); /* STDI ch. 2 - LCVS change threshold - - ADI recommended setting [REF_01 c. 2.3.3] */ + ADI recommended setting [REF_01, c. 2.3.3] */ cp_write(sd, 0xc9, 0x2d); /* use prim_mode and vid_std as free run resolution for digital formats */ -- cgit v1.2.3 From 6b0d5d344a78d43957a9f49c549b6f3aa2dc2082 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 16 Oct 2012 06:40:45 -0300 Subject: [media] adv7604: Replace prim_mode by mode Changes the way the primary mode is handled: - Remove it from platform_data since it doesn't belong there. - Add a new mode enum for use with s_routing. - Collapse the two HDMI modes into one HDMI mode: when setting up the timings manually we do not need to select HDMI_COMP mode. That's only needed when selecting a preset. This patch prepares for the next step where we switch to using the presets where available. Signed-off-by: Mats Randgaard Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/adv7604.c | 78 +++++++++++++++++---------------------------- 1 file changed, 29 insertions(+), 49 deletions(-) (limited to 'drivers') diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c index 75a8395b8992..74a18c0fc10d 100644 --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -53,8 +53,7 @@ MODULE_LICENSE("GPL"); /* ADV7604 system clock frequency */ #define ADV7604_fsc (28636360) -#define DIGITAL_INPUT ((state->prim_mode == ADV7604_PRIM_MODE_HDMI_COMP) || \ - (state->prim_mode == ADV7604_PRIM_MODE_HDMI_GR)) +#define DIGITAL_INPUT (state->mode == ADV7604_MODE_HDMI) /* ********************************************************************** @@ -68,7 +67,7 @@ struct adv7604_state { struct v4l2_subdev sd; struct media_pad pad; struct v4l2_ctrl_handler hdl; - enum adv7604_prim_mode prim_mode; + enum adv7604_mode mode; struct v4l2_dv_timings timings; u8 edid[256]; unsigned edid_blocks; @@ -738,12 +737,7 @@ static void set_rgb_quantization_range(struct v4l2_subdev *sd) switch (state->rgb_quantization_range) { case V4L2_DV_RGB_RANGE_AUTO: /* automatic */ - if ((hdmi_read(sd, 0x05) & 0x80) || - (state->prim_mode == ADV7604_PRIM_MODE_COMP) || - (state->prim_mode == ADV7604_PRIM_MODE_RGB)) { - /* receiving HDMI or analog signal */ - io_write_and_or(sd, 0x02, 0x0f, 0xf0); - } else { + if (DIGITAL_INPUT && !(hdmi_read(sd, 0x05) & 0x80)) { /* receiving DVI-D signal */ /* ADV7604 selects RGB limited range regardless of @@ -756,6 +750,9 @@ static void set_rgb_quantization_range(struct v4l2_subdev *sd) /* RGB full range (0-255) */ io_write_and_or(sd, 0x02, 0x0f, 0x10); } + } else { + /* receiving HDMI or analog signal, set automode */ + io_write_and_or(sd, 0x02, 0x0f, 0xf0); } break; case V4L2_DV_RGB_RANGE_LIMITED: @@ -1203,24 +1200,25 @@ static int adv7604_g_dv_timings(struct v4l2_subdev *sd, return 0; } -static void enable_input(struct v4l2_subdev *sd, enum adv7604_prim_mode prim_mode) +static void enable_input(struct v4l2_subdev *sd) { - switch (prim_mode) { - case ADV7604_PRIM_MODE_COMP: - case ADV7604_PRIM_MODE_RGB: + struct adv7604_state *state = to_state(sd); + + switch (state->mode) { + case ADV7604_MODE_COMP: + case ADV7604_MODE_GR: /* enable */ io_write(sd, 0x15, 0xb0); /* Disable Tristate of Pins (no audio) */ break; - case ADV7604_PRIM_MODE_HDMI_COMP: - case ADV7604_PRIM_MODE_HDMI_GR: + case ADV7604_MODE_HDMI: /* enable */ hdmi_write(sd, 0x1a, 0x0a); /* Unmute audio */ hdmi_write(sd, 0x01, 0x00); /* Enable HDMI clock terminators */ io_write(sd, 0x15, 0xa0); /* Disable Tristate of Pins */ break; default: - v4l2_err(sd, "%s: reserved primary mode 0x%0x\n", - __func__, prim_mode); + v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n", + __func__, state->mode); break; } } @@ -1233,11 +1231,13 @@ static void disable_input(struct v4l2_subdev *sd) hdmi_write(sd, 0x01, 0x78); /* Disable HDMI clock terminators */ } -static void select_input(struct v4l2_subdev *sd, enum adv7604_prim_mode prim_mode) +static void select_input(struct v4l2_subdev *sd) { - switch (prim_mode) { - case ADV7604_PRIM_MODE_COMP: - case ADV7604_PRIM_MODE_RGB: + struct adv7604_state *state = to_state(sd); + + switch (state->mode) { + case ADV7604_MODE_COMP: + case ADV7604_MODE_GR: /* set mode and select free run resolution */ io_write(sd, 0x00, 0x07); /* video std */ io_write(sd, 0x01, 0x02); /* prim mode */ @@ -1271,13 +1271,10 @@ static void select_input(struct v4l2_subdev *sd, enum adv7604_prim_mode prim_mod cp_write(sd, 0x40, 0x5c); /* CP core pre-gain control. Graphics mode */ break; - case ADV7604_PRIM_MODE_HDMI_COMP: - case ADV7604_PRIM_MODE_HDMI_GR: + case ADV7604_MODE_HDMI: /* set mode and select free run resolution */ - /* video std */ - io_write(sd, 0x00, - (prim_mode == ADV7604_PRIM_MODE_HDMI_GR) ? 0x02 : 0x1e); - io_write(sd, 0x01, prim_mode); /* prim mode */ + io_write(sd, 0x00, 0x02); /* video std */ + io_write(sd, 0x01, 0x06); /* prim mode */ /* disable embedded syncs for auto graphics mode */ cp_write_and_or(sd, 0x81, 0xef, 0x00); @@ -1309,7 +1306,8 @@ static void select_input(struct v4l2_subdev *sd, enum adv7604_prim_mode prim_mod break; default: - v4l2_err(sd, "%s: reserved primary mode 0x%0x\n", __func__, prim_mode); + v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n", + __func__, state->mode); break; } } @@ -1321,26 +1319,13 @@ static int adv7604_s_routing(struct v4l2_subdev *sd, v4l2_dbg(2, debug, sd, "%s: input %d", __func__, input); - switch (input) { - case 0: - /* TODO select HDMI_COMP or HDMI_GR */ - state->prim_mode = ADV7604_PRIM_MODE_HDMI_COMP; - break; - case 1: - state->prim_mode = ADV7604_PRIM_MODE_RGB; - break; - case 2: - state->prim_mode = ADV7604_PRIM_MODE_COMP; - break; - default: - return -EINVAL; - } + state->mode = input; disable_input(sd); - select_input(sd, state->prim_mode); + select_input(sd); - enable_input(sd, state->prim_mode); + enable_input(sd); return 0; } @@ -1724,11 +1709,6 @@ static int adv7604_core_init(struct v4l2_subdev *sd) afe_write(sd, 0x02, pdata->ain_sel); /* Select analog input muxing mode */ io_write_and_or(sd, 0x30, ~(1 << 4), pdata->output_bus_lsb_to_msb << 4); - state->prim_mode = pdata->prim_mode; - select_input(sd, pdata->prim_mode); - - enable_input(sd, pdata->prim_mode); - /* interrupts */ io_write(sd, 0x40, 0xc2); /* Configure INT1 */ io_write(sd, 0x41, 0xd7); /* STDI irq for any change, disable INT2 */ -- cgit v1.2.3 From ccbd5bc448ec782af7d1f3f68bd450c9c38015a0 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 16 Oct 2012 10:02:05 -0300 Subject: [media] adv7604: use presets where possible Use predefined video timings (prim_mode/vid_std) when available as recommended by Analog Devices (http://ez.analog.com/message/48267#48267). Also remove 720p30 support since the ADV7604 can't handle that. (http://ez.analog.com/message/61488#61488) Signed-off-by: Mats Randgaard Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/adv7604.c | 275 +++++++++++++++++++++++++++++++++++--------- 1 file changed, 219 insertions(+), 56 deletions(-) (limited to 'drivers') diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c index 74a18c0fc10d..88b7984a4188 100644 --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -105,7 +105,6 @@ static const struct v4l2_dv_timings adv7604_timings[] = { V4L2_DV_BT_CEA_720X576P50, V4L2_DV_BT_CEA_1280X720P24, V4L2_DV_BT_CEA_1280X720P25, - V4L2_DV_BT_CEA_1280X720P30, V4L2_DV_BT_CEA_1280X720P50, V4L2_DV_BT_CEA_1280X720P60, V4L2_DV_BT_CEA_1920X1080P24, @@ -114,6 +113,7 @@ static const struct v4l2_dv_timings adv7604_timings[] = { V4L2_DV_BT_CEA_1920X1080P50, V4L2_DV_BT_CEA_1920X1080P60, + /* sorted by DMT ID */ V4L2_DV_BT_DMT_640X350P85, V4L2_DV_BT_DMT_640X400P85, V4L2_DV_BT_DMT_720X400P85, @@ -163,6 +163,89 @@ static const struct v4l2_dv_timings adv7604_timings[] = { { }, }; +struct adv7604_video_standards { + struct v4l2_dv_timings timings; + u8 vid_std; + u8 v_freq; +}; + +/* sorted by number of lines */ +static const struct adv7604_video_standards adv7604_prim_mode_comp[] = { + /* { V4L2_DV_BT_CEA_720X480P59_94, 0x0a, 0x00 }, TODO flickering */ + { V4L2_DV_BT_CEA_720X576P50, 0x0b, 0x00 }, + { V4L2_DV_BT_CEA_1280X720P50, 0x19, 0x01 }, + { V4L2_DV_BT_CEA_1280X720P60, 0x19, 0x00 }, + { V4L2_DV_BT_CEA_1920X1080P24, 0x1e, 0x04 }, + { V4L2_DV_BT_CEA_1920X1080P25, 0x1e, 0x03 }, + { V4L2_DV_BT_CEA_1920X1080P30, 0x1e, 0x02 }, + { V4L2_DV_BT_CEA_1920X1080P50, 0x1e, 0x01 }, + { V4L2_DV_BT_CEA_1920X1080P60, 0x1e, 0x00 }, + /* TODO add 1920x1080P60_RB (CVT timing) */ + { }, +}; + +/* sorted by number of lines */ +static const struct adv7604_video_standards adv7604_prim_mode_gr[] = { + { V4L2_DV_BT_DMT_640X480P60, 0x08, 0x00 }, + { V4L2_DV_BT_DMT_640X480P72, 0x09, 0x00 }, + { V4L2_DV_BT_DMT_640X480P75, 0x0a, 0x00 }, + { V4L2_DV_BT_DMT_640X480P85, 0x0b, 0x00 }, + { V4L2_DV_BT_DMT_800X600P56, 0x00, 0x00 }, + { V4L2_DV_BT_DMT_800X600P60, 0x01, 0x00 }, + { V4L2_DV_BT_DMT_800X600P72, 0x02, 0x00 }, + { V4L2_DV_BT_DMT_800X600P75, 0x03, 0x00 }, + { V4L2_DV_BT_DMT_800X600P85, 0x04, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P60, 0x0c, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P70, 0x0d, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P75, 0x0e, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P85, 0x0f, 0x00 }, + { V4L2_DV_BT_DMT_1280X1024P60, 0x05, 0x00 }, + { V4L2_DV_BT_DMT_1280X1024P75, 0x06, 0x00 }, + { V4L2_DV_BT_DMT_1360X768P60, 0x12, 0x00 }, + { V4L2_DV_BT_DMT_1366X768P60, 0x13, 0x00 }, + { V4L2_DV_BT_DMT_1400X1050P60, 0x14, 0x00 }, + { V4L2_DV_BT_DMT_1400X1050P75, 0x15, 0x00 }, + { V4L2_DV_BT_DMT_1600X1200P60, 0x16, 0x00 }, /* TODO not tested */ + /* TODO add 1600X1200P60_RB (not a DMT timing) */ + { V4L2_DV_BT_DMT_1680X1050P60, 0x18, 0x00 }, + { V4L2_DV_BT_DMT_1920X1200P60_RB, 0x19, 0x00 }, /* TODO not tested */ + { }, +}; + +/* sorted by number of lines */ +static const struct adv7604_video_standards adv7604_prim_mode_hdmi_comp[] = { + { V4L2_DV_BT_CEA_720X480P59_94, 0x0a, 0x00 }, + { V4L2_DV_BT_CEA_720X576P50, 0x0b, 0x00 }, + { V4L2_DV_BT_CEA_1280X720P50, 0x13, 0x01 }, + { V4L2_DV_BT_CEA_1280X720P60, 0x13, 0x00 }, + { V4L2_DV_BT_CEA_1920X1080P24, 0x1e, 0x04 }, + { V4L2_DV_BT_CEA_1920X1080P25, 0x1e, 0x03 }, + { V4L2_DV_BT_CEA_1920X1080P30, 0x1e, 0x02 }, + { V4L2_DV_BT_CEA_1920X1080P50, 0x1e, 0x01 }, + { V4L2_DV_BT_CEA_1920X1080P60, 0x1e, 0x00 }, + { }, +}; + +/* sorted by number of lines */ +static const struct adv7604_video_standards adv7604_prim_mode_hdmi_gr[] = { + { V4L2_DV_BT_DMT_640X480P60, 0x08, 0x00 }, + { V4L2_DV_BT_DMT_640X480P72, 0x09, 0x00 }, + { V4L2_DV_BT_DMT_640X480P75, 0x0a, 0x00 }, + { V4L2_DV_BT_DMT_640X480P85, 0x0b, 0x00 }, + { V4L2_DV_BT_DMT_800X600P56, 0x00, 0x00 }, + { V4L2_DV_BT_DMT_800X600P60, 0x01, 0x00 }, + { V4L2_DV_BT_DMT_800X600P72, 0x02, 0x00 }, + { V4L2_DV_BT_DMT_800X600P75, 0x03, 0x00 }, + { V4L2_DV_BT_DMT_800X600P85, 0x04, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P60, 0x0c, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P70, 0x0d, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P75, 0x0e, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P85, 0x0f, 0x00 }, + { V4L2_DV_BT_DMT_1280X1024P60, 0x05, 0x00 }, + { V4L2_DV_BT_DMT_1280X1024P75, 0x06, 0x00 }, + { }, +}; + /* ----------------------------------------------------------------------- */ static inline struct adv7604_state *to_state(struct v4l2_subdev *sd) @@ -671,64 +754,144 @@ static int adv7604_s_detect_tx_5v_ctrl(struct v4l2_subdev *sd) ((io_read(sd, 0x6f) & 0x10) >> 4)); } -static void configure_free_run(struct v4l2_subdev *sd, const struct v4l2_bt_timings *timings) +static int find_and_set_predefined_video_timings(struct v4l2_subdev *sd, + u8 prim_mode, + const struct adv7604_video_standards *predef_vid_timings, + const struct v4l2_dv_timings *timings) +{ + struct adv7604_state *state = to_state(sd); + int i; + + for (i = 0; predef_vid_timings[i].timings.bt.width; i++) { + if (!v4l_match_dv_timings(timings, &predef_vid_timings[i].timings, + DIGITAL_INPUT ? 250000 : 1000000)) + continue; + io_write(sd, 0x00, predef_vid_timings[i].vid_std); /* video std */ + io_write(sd, 0x01, (predef_vid_timings[i].v_freq << 4) + + prim_mode); /* v_freq and prim mode */ + return 0; + } + + return -1; +} + +static int configure_predefined_video_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings) { + struct adv7604_state *state = to_state(sd); + int err; + + v4l2_dbg(1, debug, sd, "%s", __func__); + + /* reset to default values */ + io_write(sd, 0x16, 0x43); + io_write(sd, 0x17, 0x5a); + /* disable embedded syncs for auto graphics mode */ + cp_write_and_or(sd, 0x81, 0xef, 0x00); + cp_write(sd, 0x8f, 0x00); + cp_write(sd, 0x90, 0x00); + cp_write(sd, 0xa2, 0x00); + cp_write(sd, 0xa3, 0x00); + cp_write(sd, 0xa4, 0x00); + cp_write(sd, 0xa5, 0x00); + cp_write(sd, 0xa6, 0x00); + cp_write(sd, 0xa7, 0x00); + cp_write(sd, 0xab, 0x00); + cp_write(sd, 0xac, 0x00); + + switch (state->mode) { + case ADV7604_MODE_COMP: + case ADV7604_MODE_GR: + err = find_and_set_predefined_video_timings(sd, + 0x01, adv7604_prim_mode_comp, timings); + if (err) + err = find_and_set_predefined_video_timings(sd, + 0x02, adv7604_prim_mode_gr, timings); + break; + case ADV7604_MODE_HDMI: + err = find_and_set_predefined_video_timings(sd, + 0x05, adv7604_prim_mode_hdmi_comp, timings); + if (err) + err = find_and_set_predefined_video_timings(sd, + 0x06, adv7604_prim_mode_hdmi_gr, timings); + break; + default: + v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n", + __func__, state->mode); + err = -1; + break; + } + + + return err; +} + +static void configure_custom_video_timings(struct v4l2_subdev *sd, + const struct v4l2_bt_timings *bt) +{ + struct adv7604_state *state = to_state(sd); struct i2c_client *client = v4l2_get_subdevdata(sd); - u32 width = htotal(timings); - u32 height = vtotal(timings); - u16 ch1_fr_ll = (((u32)timings->pixelclock / 100) > 0) ? - ((width * (ADV7604_fsc / 100)) / ((u32)timings->pixelclock / 100)) : 0; + u32 width = htotal(bt); + u32 height = vtotal(bt); + u16 cp_start_sav = bt->hsync + bt->hbackporch - 4; + u16 cp_start_eav = width - bt->hfrontporch; + u16 cp_start_vbi = height - bt->vfrontporch; + u16 cp_end_vbi = bt->vsync + bt->vbackporch; + u16 ch1_fr_ll = (((u32)bt->pixelclock / 100) > 0) ? + ((width * (ADV7604_fsc / 100)) / ((u32)bt->pixelclock / 100)) : 0; + const u8 pll[2] = { + 0xc0 | ((width >> 8) & 0x1f), + width & 0xff + }; v4l2_dbg(2, debug, sd, "%s\n", __func__); - cp_write(sd, 0x8f, (ch1_fr_ll >> 8) & 0x7); /* CH1_FR_LL */ - cp_write(sd, 0x90, ch1_fr_ll & 0xff); /* CH1_FR_LL */ - cp_write(sd, 0xab, (height >> 4) & 0xff); /* CP_LCOUNT_MAX */ - cp_write(sd, 0xac, (height & 0x0f) << 4); /* CP_LCOUNT_MAX */ - /* TODO support interlaced */ - cp_write(sd, 0x91, 0x10); /* INTERLACED */ - - /* Should only be set in auto-graphics mode [REF_02 p. 91-92] */ - if ((io_read(sd, 0x00) == 0x07) && (io_read(sd, 0x01) == 0x02)) { - u16 cp_start_sav, cp_start_eav, cp_start_vbi, cp_end_vbi; - const u8 pll[2] = { - (0xc0 | ((width >> 8) & 0x1f)), - (width & 0xff) - }; + switch (state->mode) { + case ADV7604_MODE_COMP: + case ADV7604_MODE_GR: + /* auto graphics */ + io_write(sd, 0x00, 0x07); /* video std */ + io_write(sd, 0x01, 0x02); /* prim mode */ + /* enable embedded syncs for auto graphics mode */ + cp_write_and_or(sd, 0x81, 0xef, 0x10); + /* Should only be set in auto-graphics mode [REF_02, p. 91-92] */ /* setup PLL_DIV_MAN_EN and PLL_DIV_RATIO */ /* IO-map reg. 0x16 and 0x17 should be written in sequence */ if (adv_smbus_write_i2c_block_data(client, 0x16, 2, pll)) { v4l2_err(sd, "writing to reg 0x16 and 0x17 failed\n"); - return; + break; } /* active video - horizontal timing */ - cp_start_sav = timings->hsync + timings->hbackporch - 4; - cp_start_eav = width - timings->hfrontporch; cp_write(sd, 0xa2, (cp_start_sav >> 4) & 0xff); - cp_write(sd, 0xa3, ((cp_start_sav & 0x0f) << 4) | ((cp_start_eav >> 8) & 0x0f)); + cp_write(sd, 0xa3, ((cp_start_sav & 0x0f) << 4) | + ((cp_start_eav >> 8) & 0x0f)); cp_write(sd, 0xa4, cp_start_eav & 0xff); /* active video - vertical timing */ - cp_start_vbi = height - timings->vfrontporch; - cp_end_vbi = timings->vsync + timings->vbackporch; cp_write(sd, 0xa5, (cp_start_vbi >> 4) & 0xff); - cp_write(sd, 0xa6, ((cp_start_vbi & 0xf) << 4) | ((cp_end_vbi >> 8) & 0xf)); + cp_write(sd, 0xa6, ((cp_start_vbi & 0xf) << 4) | + ((cp_end_vbi >> 8) & 0xf)); cp_write(sd, 0xa7, cp_end_vbi & 0xff); - } else { - /* reset to default values */ - io_write(sd, 0x16, 0x43); - io_write(sd, 0x17, 0x5a); - cp_write(sd, 0xa2, 0x00); - cp_write(sd, 0xa3, 0x00); - cp_write(sd, 0xa4, 0x00); - cp_write(sd, 0xa5, 0x00); - cp_write(sd, 0xa6, 0x00); - cp_write(sd, 0xa7, 0x00); + break; + case ADV7604_MODE_HDMI: + /* set default prim_mode/vid_std for HDMI + accoring to [REF_03, c. 4.2] */ + io_write(sd, 0x00, 0x02); /* video std */ + io_write(sd, 0x01, 0x06); /* prim mode */ + break; + default: + v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n", + __func__, state->mode); + break; } -} + cp_write(sd, 0x8f, (ch1_fr_ll >> 8) & 0x7); + cp_write(sd, 0x90, ch1_fr_ll & 0xff); + cp_write(sd, 0xab, (height >> 4) & 0xff); + cp_write(sd, 0xac, (height & 0x0f) << 4); +} static void set_rgb_quantization_range(struct v4l2_subdev *sd) { @@ -964,8 +1127,10 @@ static int stdi2dv_timings(struct v4l2_subdev *sd, state->aspect_ratio, timings)) return 0; - v4l2_dbg(2, debug, sd, "%s: No format candidate found for lcf=%d, bl = %d\n", - __func__, stdi->lcf, stdi->bl); + v4l2_dbg(2, debug, sd, + "%s: No format candidate found for lcvs = %d, lcf=%d, bl = %d, %chsync, %cvsync\n", + __func__, stdi->lcvs, stdi->lcf, stdi->bl, + stdi->hs_pol, stdi->vs_pol); return -1; } @@ -1163,6 +1328,7 @@ static int adv7604_s_dv_timings(struct v4l2_subdev *sd, { struct adv7604_state *state = to_state(sd); struct v4l2_bt_timings *bt; + int err; if (!timings) return -EINVAL; @@ -1175,12 +1341,20 @@ static int adv7604_s_dv_timings(struct v4l2_subdev *sd, __func__, (u32)bt->pixelclock); return -ERANGE; } + adv7604_fill_optional_dv_timings_fields(sd, timings); state->timings = *timings; - /* freerun */ - configure_free_run(sd, bt); + cp_write(sd, 0x91, bt->interlaced ? 0x50 : 0x10); + + /* Use prim_mode and vid_std when available */ + err = configure_predefined_video_timings(sd, timings); + if (err) { + /* custom settings when the video format + does not have prim_mode/vid_std */ + configure_custom_video_timings(sd, bt); + } set_rgb_quantization_range(sd); @@ -1238,12 +1412,6 @@ static void select_input(struct v4l2_subdev *sd) switch (state->mode) { case ADV7604_MODE_COMP: case ADV7604_MODE_GR: - /* set mode and select free run resolution */ - io_write(sd, 0x00, 0x07); /* video std */ - io_write(sd, 0x01, 0x02); /* prim mode */ - /* enable embedded syncs for auto graphics mode */ - cp_write_and_or(sd, 0x81, 0xef, 0x10); - /* reset ADI recommended settings for HDMI: */ /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 4. */ hdmi_write(sd, 0x0d, 0x04); /* HDMI filter optimization */ @@ -1272,12 +1440,6 @@ static void select_input(struct v4l2_subdev *sd) break; case ADV7604_MODE_HDMI: - /* set mode and select free run resolution */ - io_write(sd, 0x00, 0x02); /* video std */ - io_write(sd, 0x01, 0x06); /* prim mode */ - /* disable embedded syncs for auto graphics mode */ - cp_write_and_or(sd, 0x81, 0xef, 0x00); - /* set ADI recommended settings for HDMI: */ /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 4. */ hdmi_write(sd, 0x0d, 0x84); /* HDMI filter optimization */ @@ -1534,8 +1696,9 @@ static int adv7604_log_status(struct v4l2_subdev *sd) v4l2_info(sd, "CP locked: %s\n", no_lock_cp(sd) ? "false" : "true"); v4l2_info(sd, "CP free run: %s\n", (!!(cp_read(sd, 0xff) & 0x10) ? "on" : "off")); - v4l2_info(sd, "Prim-mode = 0x%x, video std = 0x%x\n", - io_read(sd, 0x01) & 0x0f, io_read(sd, 0x00) & 0x3f); + v4l2_info(sd, "Prim-mode = 0x%x, video std = 0x%x, v_freq = 0x%x\n", + io_read(sd, 0x01) & 0x0f, io_read(sd, 0x00) & 0x3f, + (io_read(sd, 0x01) & 0x70) >> 4); v4l2_info(sd, "-----Video Timings-----\n"); if (read_stdi(sd, &stdi)) -- cgit v1.2.3 From cf9afb1dafaf1ffeffbb4acdb5adf255e8a2aa76 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 16 Oct 2012 10:12:55 -0300 Subject: [media] adv7604: restart STDI once if format is not found The STDI block may measure wrong values, especially for lcvs and lcf. If the driver can not find any valid timing, the STDI block is restarted to measure the video timings again. The function will return an error, but the restart of STDI will generate a new STDI interrupt and the format detection process will restart. Signed-off-by: Mats Randgaard Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/adv7604.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'drivers') diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c index 88b7984a4188..05f8950f6f91 100644 --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -76,6 +76,7 @@ struct adv7604_state { struct workqueue_struct *work_queues; struct delayed_work delayed_work_enable_hotplug; bool connector_hdmi; + bool restart_stdi_once; /* i2c clients */ struct i2c_client *i2c_avlink; @@ -1297,9 +1298,31 @@ static int adv7604_query_dv_timings(struct v4l2_subdev *sd, stdi.lcvs -= 2; v4l2_dbg(1, debug, sd, "%s: lcvs - 1 = %d\n", __func__, stdi.lcvs); if (stdi2dv_timings(sd, &stdi, timings)) { + /* + * The STDI block may measure wrong values, especially + * for lcvs and lcf. If the driver can not find any + * valid timing, the STDI block is restarted to measure + * the video timings again. The function will return an + * error, but the restart of STDI will generate a new + * STDI interrupt and the format detection process will + * restart. + */ + if (state->restart_stdi_once) { + v4l2_dbg(1, debug, sd, "%s: restart STDI\n", __func__); + /* TODO restart STDI for Sync Channel 2 */ + /* enter one-shot mode */ + cp_write_and_or(sd, 0x86, 0xf9, 0x00); + /* trigger STDI restart */ + cp_write_and_or(sd, 0x86, 0xf9, 0x04); + /* reset to continuous mode */ + cp_write_and_or(sd, 0x86, 0xf9, 0x02); + state->restart_stdi_once = false; + return -ENOLINK; + } v4l2_dbg(1, debug, sd, "%s: format not supported\n", __func__); return -ERANGE; } + state->restart_stdi_once = true; } found: @@ -2026,6 +2049,7 @@ static int adv7604_probe(struct i2c_client *client, v4l2_err(sd, "failed to create all i2c clients\n"); goto err_i2c; } + state->restart_stdi_once = true; /* work queues */ state->work_queues = create_singlethread_workqueue(client->name); -- cgit v1.2.3 From c4f4925439f13a243aecfb36c693613603c0bfbd Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Tue, 20 Nov 2012 23:00:10 -0800 Subject: Input: ads7846 - enable pendown GPIO debounce time setting Some platforms need the pendown GPIO debounce time setting programmed. Since the pendown GPIO is handled by the driver, the debounce time should also be handled along with the pendown GPIO request. Signed-off-by: Igor Grinberg Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ads7846.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index f02028ec3db6..78e5d9ab0ba7 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -955,7 +955,8 @@ static int ads7846_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(ads7846_pm, ads7846_suspend, ads7846_resume); -static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads7846 *ts) +static int __devinit ads7846_setup_pendown(struct spi_device *spi, + struct ads7846 *ts) { struct ads7846_platform_data *pdata = spi->dev.platform_data; int err; @@ -981,6 +982,9 @@ static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads784 ts->gpio_pendown = pdata->gpio_pendown; + if (pdata->gpio_pendown_debounce) + gpio_set_debounce(pdata->gpio_pendown, + pdata->gpio_pendown_debounce); } else { dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n"); return -EINVAL; -- cgit v1.2.3 From ef5b7c69b7a1b8b8744a6168b6ff02900f81b6ca Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 22 Nov 2012 09:13:36 +1100 Subject: md/raid5: move resolving of reconstruct_state earlier in stripe_handle. The chunk of code in stripe_handle which responds to a *_result value in reconstruct_state is really the completion of some processing that happened outside of handle_stripe (possibly asynchronously) and so should be one of the first things done in handle_stripe(). After the next patch it will be important that it happens before handle_stripe_clean_event(), as that will clear some dev->flags bit that this code tests. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 68 +++++++++++++++++++++++++++--------------------------- 1 file changed, 34 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index baea94f0670a..0fb988556eea 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3490,40 +3490,6 @@ static void handle_stripe(struct stripe_head *sh) handle_failed_sync(conf, sh, &s); } - /* - * might be able to return some write requests if the parity blocks - * are safe, or on a failed drive - */ - pdev = &sh->dev[sh->pd_idx]; - s.p_failed = (s.failed >= 1 && s.failed_num[0] == sh->pd_idx) - || (s.failed >= 2 && s.failed_num[1] == sh->pd_idx); - qdev = &sh->dev[sh->qd_idx]; - s.q_failed = (s.failed >= 1 && s.failed_num[0] == sh->qd_idx) - || (s.failed >= 2 && s.failed_num[1] == sh->qd_idx) - || conf->level < 6; - - if (s.written && - (s.p_failed || ((test_bit(R5_Insync, &pdev->flags) - && !test_bit(R5_LOCKED, &pdev->flags) - && (test_bit(R5_UPTODATE, &pdev->flags) || - test_bit(R5_Discard, &pdev->flags))))) && - (s.q_failed || ((test_bit(R5_Insync, &qdev->flags) - && !test_bit(R5_LOCKED, &qdev->flags) - && (test_bit(R5_UPTODATE, &qdev->flags) || - test_bit(R5_Discard, &qdev->flags)))))) - handle_stripe_clean_event(conf, sh, disks, &s.return_bi); - - /* Now we might consider reading some blocks, either to check/generate - * parity, or to satisfy requests - * or to load a block that is being partially written. - */ - if (s.to_read || s.non_overwrite - || (conf->level == 6 && s.to_write && s.failed) - || (s.syncing && (s.uptodate + s.compute < disks)) - || s.replacing - || s.expanding) - handle_stripe_fill(sh, &s, disks); - /* Now we check to see if any write operations have recently * completed */ @@ -3561,6 +3527,40 @@ static void handle_stripe(struct stripe_head *sh) s.dec_preread_active = 1; } + /* + * might be able to return some write requests if the parity blocks + * are safe, or on a failed drive + */ + pdev = &sh->dev[sh->pd_idx]; + s.p_failed = (s.failed >= 1 && s.failed_num[0] == sh->pd_idx) + || (s.failed >= 2 && s.failed_num[1] == sh->pd_idx); + qdev = &sh->dev[sh->qd_idx]; + s.q_failed = (s.failed >= 1 && s.failed_num[0] == sh->qd_idx) + || (s.failed >= 2 && s.failed_num[1] == sh->qd_idx) + || conf->level < 6; + + if (s.written && + (s.p_failed || ((test_bit(R5_Insync, &pdev->flags) + && !test_bit(R5_LOCKED, &pdev->flags) + && (test_bit(R5_UPTODATE, &pdev->flags) || + test_bit(R5_Discard, &pdev->flags))))) && + (s.q_failed || ((test_bit(R5_Insync, &qdev->flags) + && !test_bit(R5_LOCKED, &qdev->flags) + && (test_bit(R5_UPTODATE, &qdev->flags) || + test_bit(R5_Discard, &qdev->flags)))))) + handle_stripe_clean_event(conf, sh, disks, &s.return_bi); + + /* Now we might consider reading some blocks, either to check/generate + * parity, or to satisfy requests + * or to load a block that is being partially written. + */ + if (s.to_read || s.non_overwrite + || (conf->level == 6 && s.to_write && s.failed) + || (s.syncing && (s.uptodate + s.compute < disks)) + || s.replacing + || s.expanding) + handle_stripe_fill(sh, &s, disks); + /* Now to consider new write requests and what else, if anything * should be read. We do not handle new writes when: * 1/ A 'write' operation (copy+xor) is already in flight. -- cgit v1.2.3 From ca64cae96037de16e4af92678814f5d4bf0c1c65 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 21 Nov 2012 16:33:40 +1100 Subject: md/raid5: Make sure we clear R5_Discard when discard is finished. commit 9e44476851e91c86c98eb92b9bc27fb801f89072 MD: raid5 avoid unnecessary zero page for trim change raid5 to clear R5_Discard when the complete request is handled rather than when submitting the per-device discard request. However it did not clear R5_Discard for the parity device. This means that if the stripe_head was reused before it expired from the cache, the setting would be wrong and a hang would result. Also if the R5_Uptodate bit happens to be set, R5_Discard again won't be cleared. But R5_Uptodate really should be clear at this point. So make sure R5_Discard is cleared in all cases, and clear R5_Uptodate when a 'discard' completes. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 0fb988556eea..a4502686e7a8 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2774,10 +2774,12 @@ static void handle_stripe_clean_event(struct r5conf *conf, dev = &sh->dev[i]; if (!test_bit(R5_LOCKED, &dev->flags) && (test_bit(R5_UPTODATE, &dev->flags) || - test_and_clear_bit(R5_Discard, &dev->flags))) { + test_bit(R5_Discard, &dev->flags))) { /* We can return any write requests */ struct bio *wbi, *wbi2; pr_debug("Return write for disc %d\n", i); + if (test_and_clear_bit(R5_Discard, &dev->flags)) + clear_bit(R5_UPTODATE, &dev->flags); wbi = dev->written; dev->written = NULL; while (wbi && wbi->bi_sector < @@ -2795,7 +2797,8 @@ static void handle_stripe_clean_event(struct r5conf *conf, !test_bit(STRIPE_DEGRADED, &sh->state), 0); } - } + } else if (test_bit(R5_Discard, &sh->dev[i].flags)) + clear_bit(R5_Discard, &sh->dev[i].flags); if (test_and_clear_bit(STRIPE_FULL_WRITE, &sh->state)) if (atomic_dec_and_test(&conf->pending_full_writes)) -- cgit v1.2.3 From b1a925f44a3a21c538144e30b08f966cad7adb63 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= Date: Tue, 20 Nov 2012 17:35:41 +0100 Subject: tty vt: Fix a regression in command line edition MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The commit 81732c3b2fede049a692e58a7ceabb6d18ffb18c ("Fix line garbage in virtual console on command line edition") made a regression with some machines: some characters were not erased after line edition. This patch adjusts the number of moved characters and the size of the region to be updated. Signed-off-by: Jean-François Moine Tested-by: Krzysztof Mazur Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index f87d7e8964bf..4e0d0c3734b3 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -539,25 +539,25 @@ static void insert_char(struct vc_data *vc, unsigned int nr) { unsigned short *p = (unsigned short *) vc->vc_pos; - scr_memmovew(p + nr, p, vc->vc_cols - vc->vc_x); + scr_memmovew(p + nr, p, (vc->vc_cols - vc->vc_x) * 2); scr_memsetw(p, vc->vc_video_erase_char, nr * 2); vc->vc_need_wrap = 0; if (DO_UPDATE(vc)) do_update_region(vc, (unsigned long) p, - (vc->vc_cols - vc->vc_x) / 2 + 1); + vc->vc_cols - vc->vc_x); } static void delete_char(struct vc_data *vc, unsigned int nr) { unsigned short *p = (unsigned short *) vc->vc_pos; - scr_memcpyw(p, p + nr, vc->vc_cols - vc->vc_x - nr); + scr_memcpyw(p, p + nr, (vc->vc_cols - vc->vc_x - nr) * 2); scr_memsetw(p + vc->vc_cols - vc->vc_x - nr, vc->vc_video_erase_char, nr * 2); vc->vc_need_wrap = 0; if (DO_UPDATE(vc)) do_update_region(vc, (unsigned long) p, - (vc->vc_cols - vc->vc_x) / 2); + vc->vc_cols - vc->vc_x); } static int softcursor_original; -- cgit v1.2.3 From ace5a9b8dbc66ada0aa8c5f67b93527590822c7c Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Wed, 21 Nov 2012 13:21:12 +0100 Subject: drm/nouveau: use the correct fence implementation for nv50 Only compile time tested, noticed nv50_fence_create was never used, so fix this. This will probably fix vblank on nv50 cards. Hopefully this is still in time for 3.7 final release. Signed-off-by: Maarten Lankhorst Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_drm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index 0910125cbbc3..8503b2ea570a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -129,7 +129,8 @@ nouveau_accel_init(struct nouveau_drm *drm) /* initialise synchronisation routines */ if (device->card_type < NV_10) ret = nv04_fence_create(drm); - else if (device->chipset < 0x84) ret = nv10_fence_create(drm); + else if (device->card_type < NV_50) ret = nv10_fence_create(drm); + else if (device->chipset < 0x84) ret = nv50_fence_create(drm); else if (device->card_type < NV_C0) ret = nv84_fence_create(drm); else ret = nvc0_fence_create(drm); if (ret) { -- cgit v1.2.3 From 553da857b1b917e27817b923ea2c786313620845 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Tue, 23 Mar 2010 20:22:13 +0100 Subject: IXP4xx: HW pseudo-random generator is available on IXP45x/46x only. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/char/hw_random/Kconfig | 6 +++--- drivers/char/hw_random/ixp4xx-rng.c | 5 ++++- 2 files changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig index fbd9b2b850ef..c58ea9b80b1a 100644 --- a/drivers/char/hw_random/Kconfig +++ b/drivers/char/hw_random/Kconfig @@ -127,12 +127,12 @@ config HW_RANDOM_VIA If unsure, say Y. config HW_RANDOM_IXP4XX - tristate "Intel IXP4xx NPU HW Random Number Generator support" + tristate "Intel IXP4xx NPU HW Pseudo-Random Number Generator support" depends on HW_RANDOM && ARCH_IXP4XX default HW_RANDOM ---help--- - This driver provides kernel-side support for the Random - Number Generator hardware found on the Intel IXP4xx NPU. + This driver provides kernel-side support for the Pseudo-Random + Number Generator hardware found on the Intel IXP45x/46x NPU. To compile this driver as a module, choose M here: the module will be called ixp4xx-rng. diff --git a/drivers/char/hw_random/ixp4xx-rng.c b/drivers/char/hw_random/ixp4xx-rng.c index 263567f5f392..beec1627db3c 100644 --- a/drivers/char/hw_random/ixp4xx-rng.c +++ b/drivers/char/hw_random/ixp4xx-rng.c @@ -45,6 +45,9 @@ static int __init ixp4xx_rng_init(void) void __iomem * rng_base; int err; + if (!cpu_is_ixp46x()) /* includes IXP455 */ + return -ENOSYS; + rng_base = ioremap(0x70002100, 4); if (!rng_base) return -ENOMEM; @@ -68,5 +71,5 @@ module_init(ixp4xx_rng_init); module_exit(ixp4xx_rng_exit); MODULE_AUTHOR("Deepak Saxena "); -MODULE_DESCRIPTION("H/W Random Number Generator (RNG) driver for IXP4xx"); +MODULE_DESCRIPTION("H/W Pseudo-Random Number Generator (RNG) driver for IXP45x/46x"); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 9665c52b102504399a9f041b85ff9f47c5d56bb3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Thu, 25 Mar 2010 23:56:05 +0100 Subject: IXP4xx: ixp4xx_crypto driver requires Queue Manager and NPE drivers. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/crypto/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index 308c7fb92a60..f6644f59fd9d 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -224,7 +224,7 @@ config CRYPTO_DEV_TALITOS config CRYPTO_DEV_IXP4XX tristate "Driver for IXP4xx crypto hardware acceleration" - depends on ARCH_IXP4XX + depends on ARCH_IXP4XX && IXP4XX_QMGR && IXP4XX_NPE select CRYPTO_DES select CRYPTO_ALGAPI select CRYPTO_AUTHENC -- cgit v1.2.3 From 4d18dea51036c673795eb9510fd8d70dcf214414 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Tue, 1 May 2012 20:47:12 +0200 Subject: WAN: Remove redundant HDLC info printed by IXP4xx HSS driver. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/ixp4xx_hss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c index 3f575afd8cfc..0fe36d770e1f 100644 --- a/drivers/net/wan/ixp4xx_hss.c +++ b/drivers/net/wan/ixp4xx_hss.c @@ -1363,7 +1363,7 @@ static int __devinit hss_init_one(struct platform_device *pdev) platform_set_drvdata(pdev, port); - netdev_info(dev, "HSS-%i\n", port->id); + netdev_info(dev, "initialized\n"); return 0; err_free_netdev: -- cgit v1.2.3 From 9792eb1d7296ad4e19c3219dabf65efd01562a73 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Tue, 28 Dec 2010 13:08:18 +0100 Subject: IXP4xx crypto: MOD_AES{128,192,256} already include key size. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/crypto/ixp4xx_crypto.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c index 8f3f74ce8c7f..21180d6cad6e 100644 --- a/drivers/crypto/ixp4xx_crypto.c +++ b/drivers/crypto/ixp4xx_crypto.c @@ -750,12 +750,12 @@ static int setup_cipher(struct crypto_tfm *tfm, int encrypt, } if (cipher_cfg & MOD_AES) { switch (key_len) { - case 16: keylen_cfg = MOD_AES128 | KEYLEN_128; break; - case 24: keylen_cfg = MOD_AES192 | KEYLEN_192; break; - case 32: keylen_cfg = MOD_AES256 | KEYLEN_256; break; - default: - *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; - return -EINVAL; + case 16: keylen_cfg = MOD_AES128; break; + case 24: keylen_cfg = MOD_AES192; break; + case 32: keylen_cfg = MOD_AES256; break; + default: + *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + return -EINVAL; } cipher_cfg |= keylen_cfg; } else if (cipher_cfg & MOD_3DES) { -- cgit v1.2.3 From e7c0c3fa29280d62aa5e11101a674bb3064bd791 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 22 Nov 2012 14:42:49 +1100 Subject: md/raid10: close race that lose writes lost when replacement completes. When a replacement operation completes there is a small window when the original device is marked 'faulty' and the replacement still looks like a replacement. The faulty should be removed and the replacement moved in place very quickly, bit it isn't instant. So the code write out to the array must handle the possibility that the only working device for some slot in the replacement - but it doesn't. If the primary device is faulty it just gives up. This can lead to corruption. So make the code more robust: if either the primary or the replacement is present and working, write to them. Only when neither are present do we give up. This bug has been present since replacement was introduced in 3.3, so it is suitable for any -stable kernel since then. Reported-by: "George Spelvin" Cc: stable@vger.kernel.org Signed-off-by: NeilBrown --- drivers/md/raid10.c | 129 +++++++++++++++++++++++++++------------------------- 1 file changed, 68 insertions(+), 61 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index d1295aff4173..ad032518fdc0 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1334,18 +1334,21 @@ retry_write: blocked_rdev = rrdev; break; } + if (rdev && (test_bit(Faulty, &rdev->flags) + || test_bit(Unmerged, &rdev->flags))) + rdev = NULL; if (rrdev && (test_bit(Faulty, &rrdev->flags) || test_bit(Unmerged, &rrdev->flags))) rrdev = NULL; r10_bio->devs[i].bio = NULL; r10_bio->devs[i].repl_bio = NULL; - if (!rdev || test_bit(Faulty, &rdev->flags) || - test_bit(Unmerged, &rdev->flags)) { + + if (!rdev && !rrdev) { set_bit(R10BIO_Degraded, &r10_bio->state); continue; } - if (test_bit(WriteErrorSeen, &rdev->flags)) { + if (rdev && test_bit(WriteErrorSeen, &rdev->flags)) { sector_t first_bad; sector_t dev_sector = r10_bio->devs[i].addr; int bad_sectors; @@ -1387,8 +1390,10 @@ retry_write: max_sectors = good_sectors; } } - r10_bio->devs[i].bio = bio; - atomic_inc(&rdev->nr_pending); + if (rdev) { + r10_bio->devs[i].bio = bio; + atomic_inc(&rdev->nr_pending); + } if (rrdev) { r10_bio->devs[i].repl_bio = bio; atomic_inc(&rrdev->nr_pending); @@ -1444,69 +1449,71 @@ retry_write: for (i = 0; i < conf->copies; i++) { struct bio *mbio; int d = r10_bio->devs[i].devnum; - if (!r10_bio->devs[i].bio) - continue; + if (r10_bio->devs[i].bio) { + struct md_rdev *rdev = conf->mirrors[d].rdev; + mbio = bio_clone_mddev(bio, GFP_NOIO, mddev); + md_trim_bio(mbio, r10_bio->sector - bio->bi_sector, + max_sectors); + r10_bio->devs[i].bio = mbio; + + mbio->bi_sector = (r10_bio->devs[i].addr+ + choose_data_offset(r10_bio, + rdev)); + mbio->bi_bdev = rdev->bdev; + mbio->bi_end_io = raid10_end_write_request; + mbio->bi_rw = WRITE | do_sync | do_fua | do_discard; + mbio->bi_private = r10_bio; - mbio = bio_clone_mddev(bio, GFP_NOIO, mddev); - md_trim_bio(mbio, r10_bio->sector - bio->bi_sector, - max_sectors); - r10_bio->devs[i].bio = mbio; + atomic_inc(&r10_bio->remaining); - mbio->bi_sector = (r10_bio->devs[i].addr+ - choose_data_offset(r10_bio, - conf->mirrors[d].rdev)); - mbio->bi_bdev = conf->mirrors[d].rdev->bdev; - mbio->bi_end_io = raid10_end_write_request; - mbio->bi_rw = WRITE | do_sync | do_fua | do_discard; - mbio->bi_private = r10_bio; + cb = blk_check_plugged(raid10_unplug, mddev, + sizeof(*plug)); + if (cb) + plug = container_of(cb, struct raid10_plug_cb, + cb); + else + plug = NULL; + spin_lock_irqsave(&conf->device_lock, flags); + if (plug) { + bio_list_add(&plug->pending, mbio); + plug->pending_cnt++; + } else { + bio_list_add(&conf->pending_bio_list, mbio); + conf->pending_count++; + } + spin_unlock_irqrestore(&conf->device_lock, flags); + if (!plug) + md_wakeup_thread(mddev->thread); + } - atomic_inc(&r10_bio->remaining); + if (r10_bio->devs[i].repl_bio) { + struct md_rdev *rdev = conf->mirrors[d].replacement; + if (rdev == NULL) { + /* Replacement just got moved to main 'rdev' */ + smp_mb(); + rdev = conf->mirrors[d].rdev; + } + mbio = bio_clone_mddev(bio, GFP_NOIO, mddev); + md_trim_bio(mbio, r10_bio->sector - bio->bi_sector, + max_sectors); + r10_bio->devs[i].repl_bio = mbio; + + mbio->bi_sector = (r10_bio->devs[i].addr + + choose_data_offset( + r10_bio, rdev)); + mbio->bi_bdev = rdev->bdev; + mbio->bi_end_io = raid10_end_write_request; + mbio->bi_rw = WRITE | do_sync | do_fua | do_discard; + mbio->bi_private = r10_bio; - cb = blk_check_plugged(raid10_unplug, mddev, sizeof(*plug)); - if (cb) - plug = container_of(cb, struct raid10_plug_cb, cb); - else - plug = NULL; - spin_lock_irqsave(&conf->device_lock, flags); - if (plug) { - bio_list_add(&plug->pending, mbio); - plug->pending_cnt++; - } else { + atomic_inc(&r10_bio->remaining); + spin_lock_irqsave(&conf->device_lock, flags); bio_list_add(&conf->pending_bio_list, mbio); conf->pending_count++; + spin_unlock_irqrestore(&conf->device_lock, flags); + if (!mddev_check_plugged(mddev)) + md_wakeup_thread(mddev->thread); } - spin_unlock_irqrestore(&conf->device_lock, flags); - if (!plug) - md_wakeup_thread(mddev->thread); - - if (!r10_bio->devs[i].repl_bio) - continue; - - mbio = bio_clone_mddev(bio, GFP_NOIO, mddev); - md_trim_bio(mbio, r10_bio->sector - bio->bi_sector, - max_sectors); - r10_bio->devs[i].repl_bio = mbio; - - /* We are actively writing to the original device - * so it cannot disappear, so the replacement cannot - * become NULL here - */ - mbio->bi_sector = (r10_bio->devs[i].addr + - choose_data_offset( - r10_bio, - conf->mirrors[d].replacement)); - mbio->bi_bdev = conf->mirrors[d].replacement->bdev; - mbio->bi_end_io = raid10_end_write_request; - mbio->bi_rw = WRITE | do_sync | do_fua | do_discard; - mbio->bi_private = r10_bio; - - atomic_inc(&r10_bio->remaining); - spin_lock_irqsave(&conf->device_lock, flags); - bio_list_add(&conf->pending_bio_list, mbio); - conf->pending_count++; - spin_unlock_irqrestore(&conf->device_lock, flags); - if (!mddev_check_plugged(mddev)) - md_wakeup_thread(mddev->thread); } /* Don't remove the bias on 'remaining' (one_write_done) until -- cgit v1.2.3 From 884162df2aadd7414bef4935e1a54976fd4e3988 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 22 Nov 2012 15:12:09 +1100 Subject: md/raid10: decrement correct pending counter when writing to replacement. When a write to a replacement device completes, we carefully and correctly found the rdev that the write actually went to and the blithely called rdev_dec_pending on the primary rdev, even if this write was to the replacement. This means that any writes to an array while a replacement was ongoing would cause the nr_pending count for the primary device to go negative, so it could never be removed. This bug has been present since replacement was introduced in 3.3, so it is suitable for any -stable kernel since then. Reported-by: "George Spelvin" Cc: stable@vger.kernel.org Signed-off-by: NeilBrown --- drivers/md/raid10.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index ad032518fdc0..0d5d0ff2c0f7 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -499,7 +499,7 @@ static void raid10_end_write_request(struct bio *bio, int error) */ one_write_done(r10_bio); if (dec_rdev) - rdev_dec_pending(conf->mirrors[dev].rdev, conf->mddev); + rdev_dec_pending(rdev, conf->mddev); } /* -- cgit v1.2.3 From 129495dee5e1b76e8c8bf342c0f7ad18544d79a9 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Fri, 9 Nov 2012 16:41:29 +0900 Subject: drm/exynos: fix linux framebuffer address setting. With iommu, buffer->dma_addr has device addres so this patch fixes for physical address to be set to fix.smem_start always. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_fbdev.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c index 67eb6ba56edf..e7466c4414cb 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c @@ -87,7 +87,8 @@ static int exynos_drm_fbdev_update(struct drm_fb_helper *helper, dev->mode_config.fb_base = (resource_size_t)buffer->dma_addr; fbi->screen_base = buffer->kvaddr + offset; - fbi->fix.smem_start = (unsigned long)(buffer->dma_addr + offset); + fbi->fix.smem_start = (unsigned long)(page_to_phys(buffer->pages[0]) + + offset); fbi->screen_size = size; fbi->fix.smem_len = size; -- cgit v1.2.3 From a39b49812fe0c3f62fd3f7f6ec8c10d8f7035992 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Wed, 14 Nov 2012 17:28:36 +0900 Subject: drm/exynos: remove unnecessary code. plane->fb will be set to new fb after update_plane callback is called by drm_mode_set_plane() Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_plane.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c b/drivers/gpu/drm/exynos/exynos_drm_plane.c index 60b877a388c2..862ca1eb2102 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c @@ -204,7 +204,6 @@ exynos_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, return ret; plane->crtc = crtc; - plane->fb = crtc->fb; exynos_plane_commit(plane); exynos_plane_dpms(plane, DRM_MODE_DPMS_ON); -- cgit v1.2.3 From ffe9955a741a2742cc517245b2219b61cc6dde28 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Wed, 14 Nov 2012 20:41:35 +0900 Subject: drm/exynos: fix overlay updating issue Chagelog v2: Move encoder's dpms updating into exynos_drm_encoder_commit function because when crtc's dpms is updated, encoder's dpms is updated also. This would induce the issue that encoder isn't disabled after crtc is disabled. Changelog v1: This patch fixes a issue that overlay data aren't applied to real hardware when dpms off goes to on after setcrtc was requested like below, dpms off -> setcrtc -> dpms off -> dpms on For this, it makes encoder's dpms to be updated when setcrtc is requested. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_encoder.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c index 241ad1eeec64..607231a71b2d 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c +++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c @@ -226,6 +226,12 @@ static void exynos_drm_encoder_commit(struct drm_encoder *encoder) * already updated or not by exynos_drm_encoder_dpms function. */ exynos_encoder->updated = true; + + /* + * In case of setcrtc, there is no way to update encoder's dpms + * so update it here. + */ + exynos_encoder->dpms = DRM_MODE_DPMS_ON; } static void exynos_drm_encoder_disable(struct drm_encoder *encoder) -- cgit v1.2.3 From 77b1c0362ffdb11128590a7248f3f8c434ab42f2 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 19 Nov 2012 15:22:54 +0530 Subject: drm/exynos: Make exynos4/5_fimd_driver_data static Fixes the following sparse warnings: drivers/gpu/drm/exynos/exynos_drm_fimd.c:65:25: warning: symbol 'exynos4_fimd_driver_data' was not declared. Should it be static? drivers/gpu/drm/exynos/exynos_drm_fimd.c:69:25: warning: symbol 'exynos5_fimd_driver_data' was not declared. Should it be static? Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 130a2b510d4a..e08478f19f1a 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -61,11 +61,11 @@ struct fimd_driver_data { unsigned int timing_base; }; -struct fimd_driver_data exynos4_fimd_driver_data = { +static struct fimd_driver_data exynos4_fimd_driver_data = { .timing_base = 0x0, }; -struct fimd_driver_data exynos5_fimd_driver_data = { +static struct fimd_driver_data exynos5_fimd_driver_data = { .timing_base = 0x20000, }; -- cgit v1.2.3 From c69d5276704e1a9c771de57c0a2e7b69ea3ea578 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 19 Nov 2012 14:50:30 +0530 Subject: drm/exynos: Fix potential NULL pointer dereference in exynos_drm_encoder.c Check overlay_ops is not NULL as checked in the previous 'if' condition. Fixes the following smatch error: drivers/gpu/drm/exynos/exynos_drm_encoder.c:509 exynos_drm_encoder_plane_disable() error: we previously assumed 'overlay_ops' could be null (see line 499) Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_encoder.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c index 607231a71b2d..f2df06c603f7 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c +++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c @@ -513,6 +513,6 @@ void exynos_drm_encoder_plane_disable(struct drm_encoder *encoder, void *data) * because the setting for disabling the overlay will be updated * at vsync. */ - if (overlay_ops->wait_for_vblank) + if (overlay_ops && overlay_ops->wait_for_vblank) overlay_ops->wait_for_vblank(manager->dev); } -- cgit v1.2.3 From 17803580ace1953e78a995423f4945f77f0deb80 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 28 Sep 2012 07:28:58 -0300 Subject: [media] media: sh_vou: fix const cropping related warnings A recent commit "[media] v4l2: make vidioc_s_crop const" introduced warnings in sh_vou. Fix them by cleanly separating writable and read-only variables in cropping operations. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/sh_vou.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/platform/sh_vou.c b/drivers/media/platform/sh_vou.c index 85fd312f0a82..a1c87f0ceaab 100644 --- a/drivers/media/platform/sh_vou.c +++ b/drivers/media/platform/sh_vou.c @@ -935,9 +935,10 @@ static int sh_vou_g_crop(struct file *file, void *fh, struct v4l2_crop *a) /* Assume a dull encoder, do all the work ourselves. */ static int sh_vou_s_crop(struct file *file, void *fh, const struct v4l2_crop *a) { + struct v4l2_crop a_writable = *a; struct video_device *vdev = video_devdata(file); struct sh_vou_device *vou_dev = video_get_drvdata(vdev); - struct v4l2_rect *rect = &a->c; + struct v4l2_rect *rect = &a_writable.c; struct v4l2_crop sd_crop = {.type = V4L2_BUF_TYPE_VIDEO_OUTPUT}; struct v4l2_pix_format *pix = &vou_dev->pix; struct sh_vou_geometry geo; -- cgit v1.2.3 From 3ecb091e8827b4939b917139f4a86a66d36ed7e1 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 28 Sep 2012 06:59:58 -0300 Subject: [media] media: sh_mobile_ceu_camera: fix const cropping related warnings A recent commit "[media] v4l2: make vidioc_s_crop const" introduced warnings in sh_mobile_ceu_camera. Fix them by cleanly separating writable and read-only variables in cropping operations. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c index 0a24253dcda2..2d8861c0e8f2 100644 --- a/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c +++ b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c @@ -1182,13 +1182,13 @@ static void sh_mobile_ceu_put_formats(struct soc_camera_device *icd) } /* Check if any dimension of r1 is smaller than respective one of r2 */ -static bool is_smaller(struct v4l2_rect *r1, struct v4l2_rect *r2) +static bool is_smaller(const struct v4l2_rect *r1, const struct v4l2_rect *r2) { return r1->width < r2->width || r1->height < r2->height; } /* Check if r1 fails to cover r2 */ -static bool is_inside(struct v4l2_rect *r1, struct v4l2_rect *r2) +static bool is_inside(const struct v4l2_rect *r1, const struct v4l2_rect *r2) { return r1->left > r2->left || r1->top > r2->top || r1->left + r1->width < r2->left + r2->width || @@ -1263,7 +1263,7 @@ static void update_subrect(struct sh_mobile_ceu_cam *cam) * 3. if (2) failed, try to request the maximum image */ static int client_s_crop(struct soc_camera_device *icd, struct v4l2_crop *crop, - const struct v4l2_crop *cam_crop) + struct v4l2_crop *cam_crop) { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct v4l2_rect *rect = &crop->c, *cam_rect = &cam_crop->c; @@ -1519,7 +1519,8 @@ static int client_scale(struct soc_camera_device *icd, static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd, const struct v4l2_crop *a) { - struct v4l2_rect *rect = &a->c; + struct v4l2_crop a_writable = *a; + const struct v4l2_rect *rect = &a_writable.c; struct device *dev = icd->parent; struct soc_camera_host *ici = to_soc_camera_host(dev); struct sh_mobile_ceu_dev *pcdev = ici->priv; @@ -1545,7 +1546,7 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd, * 1. - 2. Apply iterative camera S_CROP for new input window, read back * actual camera rectangle. */ - ret = client_s_crop(icd, a, &cam_crop); + ret = client_s_crop(icd, &a_writable, &cam_crop); if (ret < 0) return ret; @@ -1946,7 +1947,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, } static int sh_mobile_ceu_set_livecrop(struct soc_camera_device *icd, - struct v4l2_crop *a) + const struct v4l2_crop *a) { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct soc_camera_host *ici = to_soc_camera_host(icd->parent); -- cgit v1.2.3 From 448a61f09e319c54bf149a20d9c8f63d5242a936 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 28 Sep 2012 07:27:30 -0300 Subject: [media] media: pxa_camera: fix const cropping related warnings A recent commit "[media] v4l2: make vidioc_s_crop const" introduced warnings in pxa_camera.c. Fix them by adjusting a function declaration. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/soc_camera/pxa_camera.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/soc_camera/pxa_camera.c b/drivers/media/platform/soc_camera/pxa_camera.c index 1e3776d08dac..3434ffe79c6e 100644 --- a/drivers/media/platform/soc_camera/pxa_camera.c +++ b/drivers/media/platform/soc_camera/pxa_camera.c @@ -1337,9 +1337,9 @@ static int pxa_camera_check_frame(u32 width, u32 height) } static int pxa_camera_set_crop(struct soc_camera_device *icd, - struct v4l2_crop *a) + const struct v4l2_crop *a) { - struct v4l2_rect *rect = &a->c; + const struct v4l2_rect *rect = &a->c; struct device *dev = icd->parent; struct soc_camera_host *ici = to_soc_camera_host(dev); struct pxa_camera_dev *pcdev = ici->priv; -- cgit v1.2.3 From 60cd1ee17d9d91aeaa4224a15595dd27163ac57d Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 28 Sep 2012 07:39:06 -0300 Subject: [media] media: mx3_camera: fix const cropping related warnings A recent commit "[media] v4l2: make vidioc_s_crop const" introduced warnings in mx3_camera. Fix them by cleanly separating writable and read-only variables in cropping operations. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/soc_camera/mx3_camera.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/soc_camera/mx3_camera.c b/drivers/media/platform/soc_camera/mx3_camera.c index 3557ac97e430..261f6e9e1b17 100644 --- a/drivers/media/platform/soc_camera/mx3_camera.c +++ b/drivers/media/platform/soc_camera/mx3_camera.c @@ -799,9 +799,10 @@ static inline void stride_align(__u32 *width) * default g_crop and cropcap from soc_camera.c */ static int mx3_camera_set_crop(struct soc_camera_device *icd, - struct v4l2_crop *a) + const struct v4l2_crop *a) { - struct v4l2_rect *rect = &a->c; + struct v4l2_crop a_writable = *a; + struct v4l2_rect *rect = &a_writable.c; struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx3_camera_dev *mx3_cam = ici->priv; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); -- cgit v1.2.3 From d63bb2790c0e1c44434cb2cc5292cd23d25d4ca5 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 28 Sep 2012 07:46:52 -0300 Subject: [media] media: mx2_camera: fix const cropping related warnings A recent commit "[media] v4l2: make vidioc_s_crop const" introduced warnings in mx2_camera. Fix them by cleanly separating writable and read-only variables in cropping operations. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/soc_camera/mx2_camera.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/soc_camera/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c index 9fd9d1c5b218..f36b362aff69 100644 --- a/drivers/media/platform/soc_camera/mx2_camera.c +++ b/drivers/media/platform/soc_camera/mx2_camera.c @@ -1099,9 +1099,10 @@ static int mx2_camera_set_bus_param(struct soc_camera_device *icd) } static int mx2_camera_set_crop(struct soc_camera_device *icd, - struct v4l2_crop *a) + const struct v4l2_crop *a) { - struct v4l2_rect *rect = &a->c; + struct v4l2_crop a_writable = *a; + struct v4l2_rect *rect = &a_writable.c; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct v4l2_mbus_framefmt mf; int ret; -- cgit v1.2.3 From 5c111913347e60c364776824e1ed766dd8958ffa Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 28 Sep 2012 07:48:26 -0300 Subject: [media] media: mx1_camera: use the default .set_crop() implementation .set_crop() implementation in mx1_camera is identical with the default. Remove the copy to switch to using the default stab. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/soc_camera/mx1_camera.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/soc_camera/mx1_camera.c b/drivers/media/platform/soc_camera/mx1_camera.c index bbe70991d30b..032b8c9097f9 100644 --- a/drivers/media/platform/soc_camera/mx1_camera.c +++ b/drivers/media/platform/soc_camera/mx1_camera.c @@ -470,14 +470,6 @@ static void mx1_camera_remove_device(struct soc_camera_device *icd) pcdev->icd = NULL; } -static int mx1_camera_set_crop(struct soc_camera_device *icd, - struct v4l2_crop *a) -{ - struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - - return v4l2_subdev_call(sd, video, s_crop, a); -} - static int mx1_camera_set_bus_param(struct soc_camera_device *icd) { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); @@ -689,7 +681,6 @@ static struct soc_camera_host_ops mx1_soc_camera_host_ops = { .add = mx1_camera_add_device, .remove = mx1_camera_remove_device, .set_bus_param = mx1_camera_set_bus_param, - .set_crop = mx1_camera_set_crop, .set_fmt = mx1_camera_set_fmt, .try_fmt = mx1_camera_try_fmt, .init_videobuf = mx1_camera_init_videobuf, -- cgit v1.2.3 From 6a3082adc85a3acc9258ad2e4858abc55be9b514 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 28 Sep 2012 07:57:17 -0300 Subject: [media] media: omap1_camera: fix const cropping related warnings A recent commit "[media] v4l2: make vidioc_s_crop const" introduced warnings in omap1_camera. Fix them by adjusting a function declaration. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/soc_camera/omap1_camera.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/soc_camera/omap1_camera.c b/drivers/media/platform/soc_camera/omap1_camera.c index fa08c7695ccb..13636a585106 100644 --- a/drivers/media/platform/soc_camera/omap1_camera.c +++ b/drivers/media/platform/soc_camera/omap1_camera.c @@ -1215,9 +1215,9 @@ static int set_mbus_format(struct omap1_cam_dev *pcdev, struct device *dev, } static int omap1_cam_set_crop(struct soc_camera_device *icd, - struct v4l2_crop *crop) + const struct v4l2_crop *crop) { - struct v4l2_rect *rect = &crop->c; + const struct v4l2_rect *rect = &crop->c; const struct soc_camera_format_xlate *xlate = icd->current_fmt; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct device *dev = icd->parent; -- cgit v1.2.3 From f1ccccaf23132a2eda036dd3978ebe3f020c5af9 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 22 Oct 2012 02:27:28 -0300 Subject: [media] mx2_camera: fix missing unlock on error in mx2_start_streaming() Add the missing unlock on the error handle path in function mx2_start_streaming(). Signed-off-by: Wei Yongjun Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/soc_camera/mx2_camera.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/soc_camera/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c index f36b362aff69..9a55f4c4c7f4 100644 --- a/drivers/media/platform/soc_camera/mx2_camera.c +++ b/drivers/media/platform/soc_camera/mx2_camera.c @@ -864,8 +864,10 @@ static int mx2_start_streaming(struct vb2_queue *q, unsigned int count) bytesperline = soc_mbus_bytes_per_line(icd->user_width, icd->current_fmt->host_fmt); - if (bytesperline < 0) + if (bytesperline < 0) { + spin_unlock_irqrestore(&pcdev->lock, flags); return bytesperline; + } /* * I didn't manage to properly enable/disable the prp @@ -878,8 +880,10 @@ static int mx2_start_streaming(struct vb2_queue *q, unsigned int count) pcdev->discard_buffer = dma_alloc_coherent(ici->v4l2_dev.dev, pcdev->discard_size, &pcdev->discard_buffer_dma, GFP_KERNEL); - if (!pcdev->discard_buffer) + if (!pcdev->discard_buffer) { + spin_unlock_irqrestore(&pcdev->lock, flags); return -ENOMEM; + } pcdev->buf_discard[0].discard = true; list_add_tail(&pcdev->buf_discard[0].queue, -- cgit v1.2.3 From 9bb047cd1a7efc162205ce48013ef3a2287b0e9f Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Thu, 27 Sep 2012 19:04:34 -0300 Subject: [media] mt9v022: fix the V4L2_CID_EXPOSURE control Since the MT9V022_TOTAL_SHUTTER_WIDTH register is controlled in manual mode by V4L2_CID_EXPOSURE control, it shouldn't be written directly in mt9v022_s_crop(). In manual mode this register should be set to the V4L2_CID_EXPOSURE control value. Changing this register directly and outside of the actual control function means that the register value is not in sync with the corresponding control value. Thus, the following problem is observed: - setting this control initially succeeds - VIDIOC_S_CROP ioctl() overwrites the MT9V022_TOTAL_SHUTTER_WIDTH register - setting this control to the same value again doesn't result in setting the register since the control value was previously cached and doesn't differ Remove MT9V022_TOTAL_SHUTTER_WIDTH register setting in mt9v022_s_crop() and add a comment explaining why it is not needed in manual mode. Signed-off-by: Anatolij Gustschin Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/soc_camera/mt9v022.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/i2c/soc_camera/mt9v022.c b/drivers/media/i2c/soc_camera/mt9v022.c index 13057b966ee9..333ef178d6fb 100644 --- a/drivers/media/i2c/soc_camera/mt9v022.c +++ b/drivers/media/i2c/soc_camera/mt9v022.c @@ -263,9 +263,14 @@ static int mt9v022_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a) if (ret & 1) /* Autoexposure */ ret = reg_write(client, mt9v022->reg->max_total_shutter_width, rect.height + mt9v022->y_skip_top + 43); - else - ret = reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH, - rect.height + mt9v022->y_skip_top + 43); + /* + * If autoexposure is off, there is no need to set + * MT9V022_TOTAL_SHUTTER_WIDTH here. Autoexposure can be off + * only if the user has set exposure manually, using the + * V4L2_CID_EXPOSURE_AUTO with the value V4L2_EXPOSURE_MANUAL. + * In this case the register MT9V022_TOTAL_SHUTTER_WIDTH + * already contains the correct value. + */ } /* Setup frame format: defaults apart from width and height */ if (!ret) -- cgit v1.2.3 From 08e5727416840c4de8ec450064b131ddfb6ed838 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Tue, 6 Nov 2012 16:03:35 -0300 Subject: [media] rtl28xxu: 1d19:1102 Dexatek DK mini DVB-T Dongle Add new USB ID as driver supports it. Reported-by: Hubert Lin Tested-by: Hubert Lin Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c index adabba8d28bc..0149cdde8f02 100644 --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c @@ -1346,6 +1346,8 @@ static const struct usb_device_id rtl28xxu_id_table[] = { &rtl2832u_props, "DigitalNow Quad DVB-T Receiver", NULL) }, { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00d3, &rtl2832u_props, "TerraTec Cinergy T Stick RC (Rev. 3)", NULL) }, + { DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1102, + &rtl2832u_props, "Dexatek DK mini DVB-T Dongle", NULL) }, { } }; MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table); -- cgit v1.2.3 From 86163adb8125a4ce85e0b23a50be82bd8c0daf95 Mon Sep 17 00:00:00 2001 From: Andrew Karpow Date: Tue, 6 Nov 2012 20:01:16 -0300 Subject: [media] rtl28xxu: 0ccd:00d7 TerraTec Cinergy T Stick+ added usb-id as driver supports the stick Signed-off-by: Andrew Karpow Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c index 0149cdde8f02..093f1acce403 100644 --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c @@ -1348,6 +1348,8 @@ static const struct usb_device_id rtl28xxu_id_table[] = { &rtl2832u_props, "TerraTec Cinergy T Stick RC (Rev. 3)", NULL) }, { DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1102, &rtl2832u_props, "Dexatek DK mini DVB-T Dongle", NULL) }, + { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00d7, + &rtl2832u_props, "TerraTec Cinergy T Stick+", NULL) }, { } }; MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table); -- cgit v1.2.3 From 8ad9375f8b7c709b89f7de4de413bb2644ba3c24 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Wed, 21 Nov 2012 21:48:51 +0200 Subject: OMAPDSS: do not fail if dpll4_m4_ck is missing Do not fail if dpll4_m4_ck is missing. The clock is not there on omap24xx, so this should not be a hard error. The patch retains the functionality before the commit 185bae10 (OMAPDSS: DSS: Cleanup cpu_is_xxxx checks). Signed-off-by: Aaro Koskinen Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dss.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c index 0bb7406bdbb8..5f6eea801b06 100644 --- a/drivers/video/omap2/dss/dss.c +++ b/drivers/video/omap2/dss/dss.c @@ -697,11 +697,15 @@ static int dss_get_clocks(void) dss.dss_clk = clk; - clk = clk_get(NULL, dss.feat->clk_name); - if (IS_ERR(clk)) { - DSSERR("Failed to get %s\n", dss.feat->clk_name); - r = PTR_ERR(clk); - goto err; + if (dss.feat->clk_name) { + clk = clk_get(NULL, dss.feat->clk_name); + if (IS_ERR(clk)) { + DSSERR("Failed to get %s\n", dss.feat->clk_name); + r = PTR_ERR(clk); + goto err; + } + } else { + clk = NULL; } dss.dpll4_m4_ck = clk; -- cgit v1.2.3 From 9a30a61f3516871c5c638fd7c025fbaa11ddf7fe Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Mon, 12 Nov 2012 14:33:45 +0200 Subject: drm/i915: do not default to 18 bpp for eDP if missing from VBT commit 500a8cc466a24e2fbc4c86ef9c6467ae2ffdeb0c Author: Zhenyu Wang Date: Wed Jan 13 11:19:52 2010 +0800 drm/i915: parse eDP panel color depth from VBT block originally introduced parsing bpp for eDP from VBT, with a default of 18 bpp if the eDP BIOS data block is not present. Turns out that default seems to break the Macbook Pro with retina display, as noted in commit 4344b813f105a19f793f1fd93ad775b784648b95 Author: Daniel Vetter Date: Fri Aug 10 11:10:20 2012 +0200 drm/i915: ignore eDP bpc settings from vbt Since we can't ignore bpc settings from VBT completely after all, get rid of the default. Do not clamp eDP to 18 bpp by default if the eDP BDB is missing from VBT. Signed-off-by: Jani Nikula Tested-by: Henrik Rydberg [danvet: paste in the updated commit message from irc.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_bios.c | 11 ++--------- drivers/gpu/drm/i915/intel_display.c | 2 +- 2 files changed, 3 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 0ed6baff4b0c..56846ed5ee55 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -499,12 +499,8 @@ parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb) edp = find_section(bdb, BDB_EDP); if (!edp) { - if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp.support) { - DRM_DEBUG_KMS("No eDP BDB found but eDP panel " - "supported, assume %dbpp panel color " - "depth.\n", - dev_priv->edp.bpp); - } + if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp.support) + DRM_DEBUG_KMS("No eDP BDB found but eDP panel supported.\n"); return; } @@ -657,9 +653,6 @@ init_vbt_defaults(struct drm_i915_private *dev_priv) dev_priv->lvds_use_ssc = 1; dev_priv->lvds_ssc_freq = intel_bios_ssc_frequency(dev, 1); DRM_DEBUG_KMS("Set default to SSC at %dMHz\n", dev_priv->lvds_ssc_freq); - - /* eDP data */ - dev_priv->edp.bpp = 18; } static int __init intel_no_opregion_vbt_callback(const struct dmi_system_id *id) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 4154bcd7a070..b426d44a2b05 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3845,7 +3845,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, /* Use VBT settings if we have an eDP panel */ unsigned int edp_bpc = dev_priv->edp.bpp / 3; - if (edp_bpc < display_bpc) { + if (edp_bpc && edp_bpc < display_bpc) { DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); display_bpc = edp_bpc; } -- cgit v1.2.3 From 958f9889950ef257f601c4902137caff291d5dd7 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 18 Nov 2012 06:25:07 +0100 Subject: i2c: mxs: Handle i2c DMA failure properly Properly terminate the DMA transfer in case the DMA PIO transfer or setup fails for any reason. Signed-off-by: Marek Vasut Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mxs.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 286ca1917820..0670da79ee5e 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -287,12 +287,14 @@ read_init_dma_fail: select_init_dma_fail: dma_unmap_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE); select_init_pio_fail: + dmaengine_terminate_all(i2c->dmach); return -EINVAL; /* Write failpath. */ write_init_dma_fail: dma_unmap_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE); write_init_pio_fail: + dmaengine_terminate_all(i2c->dmach); return -EINVAL; } -- cgit v1.2.3 From eac7cc52c6b410e542af431b2ee93f3d7dbfb6af Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Tue, 6 Nov 2012 11:47:13 +0100 Subject: floppy: destroy floppy workqueue before cleaning up the queue We need to first destroy the floppy_wq workqueue before cleaning up the queue. Otherwise we might race with still pending work with the workqueue, but all the block queue already gone. This might lead to various oopses, such as CPU 0 Pid: 6, comm: kworker/u:0 Not tainted 3.7.0-rc4 #1 Bochs Bochs RIP: 0010:[] [] blk_peek_request+0xd5/0x1c0 RSP: 0000:ffff88000dc7dd88 EFLAGS: 00010092 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88000f602688 RSI: ffffffff81fd95d8 RDI: 6b6b6b6b6b6b6b6b RBP: ffff88000dc7dd98 R08: ffffffff81fd95c8 R09: 0000000000000000 R10: ffffffff81fd9480 R11: 0000000000000001 R12: 6b6b6b6b6b6b6b6b R13: ffff88000dc7dfd8 R14: ffff88000dc7dfd8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffffff81e21000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 0000000001e11000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/u:0 (pid: 6, threadinfo ffff88000dc7c000, task ffff88000dc5ecc0) Stack: 0000000000000000 0000000000000000 ffff88000dc7ddb8 ffffffff8134efee ffff88000dc7ddb8 0000000000000000 ffff88000dc7dde8 ffffffff814aef3c ffffffff81e75d80 ffff88000dc0c640 ffff88000fbfb000 ffffffff814aed90 Call Trace: [] blk_fetch_request+0xe/0x30 [] redo_fd_request+0x1ac/0x400 [] ? start_motor+0x130/0x130 [] process_one_work+0x136/0x450 [] ? manage_workers+0x205/0x2e0 [] worker_thread+0x14d/0x420 [] ? rescuer_thread+0x1a0/0x1a0 [] kthread+0xba/0xc0 [] ? __kthread_parkme+0x80/0x80 [] ret_from_fork+0x7a/0xb0 [] ? __kthread_parkme+0x80/0x80 Code: 0f 84 c0 00 00 00 83 f8 01 0f 85 e2 00 00 00 81 4b 40 00 00 80 00 48 89 df e8 58 f8 ff ff be fb ff ff ff fe ff ff <49> 8b 1c 24 49 39 dc 0f 85 2e ff ff ff 41 0f b6 84 24 28 04 00 RIP [] blk_peek_request+0xd5/0x1c0 RSP Reported-by: Fengguang Wu Tested-by: Fengguang Wu Signed-off-by: Jiri Kosina Signed-off-by: Jens Axboe --- drivers/block/floppy.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 1c49d7173966..2ddd64a9ffde 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4330,6 +4330,7 @@ out_unreg_region: out_unreg_blkdev: unregister_blkdev(FLOPPY_MAJOR, "fd"); out_put_disk: + destroy_workqueue(floppy_wq); for (drive = 0; drive < N_DRIVE; drive++) { if (!disks[drive]) break; @@ -4340,7 +4341,6 @@ out_put_disk: } put_disk(disks[drive]); } - destroy_workqueue(floppy_wq); return err; } @@ -4555,6 +4555,8 @@ static void __exit floppy_module_exit(void) unregister_blkdev(FLOPPY_MAJOR, "fd"); platform_driver_unregister(&floppy_driver); + destroy_workqueue(floppy_wq); + for (drive = 0; drive < N_DRIVE; drive++) { del_timer_sync(&motor_off_timer[drive]); @@ -4578,7 +4580,6 @@ static void __exit floppy_module_exit(void) cancel_delayed_work_sync(&fd_timeout); cancel_delayed_work_sync(&fd_timer); - destroy_workqueue(floppy_wq); if (atomic_read(&usage_count)) floppy_release_irq_and_dma(); -- cgit v1.2.3 From a8c32a5c98943d370ea606a2e7dc04717eb92206 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 6 Nov 2012 12:24:26 +0100 Subject: dm: fix deadlock with request based dm and queue request_fn recursion Request based dm attempts to re-run the request queue off the request completion path. If used with a driver that potentially does end_io from its request_fn, we could deadlock trying to recurse back into request dispatch. Fix this by punting the request queue run to kblockd. Tested to fix a quickly reproducible deadlock in such a scenario. Cc: stable@kernel.org Acked-by: Alasdair G Kergon Signed-off-by: Jens Axboe --- drivers/md/dm.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 02db9183ca01..77e6eff41cae 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -740,8 +740,14 @@ static void rq_completed(struct mapped_device *md, int rw, int run_queue) if (!md_in_flight(md)) wake_up(&md->wait); + /* + * Run this off this callpath, as drivers could invoke end_io while + * inside their request_fn (and holding the queue lock). Calling + * back into ->request_fn() could deadlock attempting to grab the + * queue lock again. + */ if (run_queue) - blk_run_queue(md->queue); + blk_run_queue_async(md->queue); /* * dm_put() must be at the end of this function. See the comment above -- cgit v1.2.3 From 3208795e612406df04a32b46eb5ea5fccfa51d69 Mon Sep 17 00:00:00 2001 From: Selvan Mani Date: Wed, 7 Nov 2012 06:03:37 -0700 Subject: mtip32xx: fix potential crash on SEC_ERASE_UNIT The mtip driver lifted this code from elsewhere and then added a special handling check for SEC_ERASE_UNIT. If the caller tries to do a security erase but passes no output data for the command then outbuf is not allocated and the driver duly explodes. Reported-by: Dan Carpenter Signed-off-by: Alan Cox Signed-off-by: Selvan Mani Signed-off-by: Asai Thambi S P Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index adc6f36564cf..dfb7196bbde9 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -2218,8 +2218,8 @@ static int exec_drive_taskfile(struct driver_data *dd, fis.device); /* check for erase mode support during secure erase.*/ - if ((fis.command == ATA_CMD_SEC_ERASE_UNIT) - && (outbuf[0] & MTIP_SEC_ERASE_MODE)) { + if ((fis.command == ATA_CMD_SEC_ERASE_UNIT) && outbuf && + (outbuf[0] & MTIP_SEC_ERASE_MODE)) { erasemode = 1; } -- cgit v1.2.3 From eda45314922f500f3547d36d317efc05ed823e3e Mon Sep 17 00:00:00 2001 From: Selvan Mani Date: Wed, 7 Nov 2012 06:03:53 -0700 Subject: mtip32xx: Fix to make lba address correct in big-endian systems Earlier lba address was assigned directly to lba_low and lba_low_ex, which would result in a different number (bytes reversed) in big-endian systems. Now assigning lba address byte-by-byte to fis. Reported-by: Dan Carpenter Signed-off-by: Selvan Mani Signed-off-by: Asai Thambi S P Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index dfb7196bbde9..df46b5a3f56f 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -2465,8 +2465,12 @@ static void mtip_hw_submit_io(struct driver_data *dd, sector_t start, fis->opts = 1 << 7; fis->command = (dir == READ ? ATA_CMD_FPDMA_READ : ATA_CMD_FPDMA_WRITE); - *((unsigned int *) &fis->lba_low) = (start & 0xFFFFFF); - *((unsigned int *) &fis->lba_low_ex) = ((start >> 24) & 0xFFFFFF); + fis->lba_low = start & 0xFF; + fis->lba_mid = (start >> 8) & 0xFF; + fis->lba_hi = (start >> 16) & 0xFF; + fis->lba_low_ex = (start >> 24) & 0xFF; + fis->lba_mid_ex = (start >> 32) & 0xFF; + fis->lba_hi_ex = (start >> 40) & 0xFF; fis->device = 1 << 6; fis->features = nsect & 0xFF; fis->features_ex = (nsect >> 8) & 0xFF; -- cgit v1.2.3 From 4b9e884523f63f7bfd6fcbcdfe6f9f9545d98c13 Mon Sep 17 00:00:00 2001 From: Selvan Mani Date: Wed, 7 Nov 2012 06:03:56 -0700 Subject: mtip32xx: Fix incorrect mask used for erase mode Previous commit use value 3 for erasemode mask. Changing the mask to correct value to 2 Signed-off-by: Selvan Mani Signed-off-by: Asai Thambi S P Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h index 5f4a917bd8bb..8498e99666b2 100644 --- a/drivers/block/mtip32xx/mtip32xx.h +++ b/drivers/block/mtip32xx/mtip32xx.h @@ -34,7 +34,7 @@ #define PCIE_CONFIG_EXT_DEVICE_CONTROL_OFFSET 0x48 /* check for erase mode support during secure erase */ -#define MTIP_SEC_ERASE_MODE 0x3 +#define MTIP_SEC_ERASE_MODE 0x2 /* # of times to retry timed out/failed IOs */ #define MTIP_MAX_RETRIES 2 -- cgit v1.2.3 From 7c5d62388e88729775b10a1748f2810e413f1e51 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 8 Nov 2012 07:58:53 +0100 Subject: mtip32xx: fix shift larger than type warning If we're building a 32-bit kernel and CONFIG_LBADF isn't set, sector_t is 32-bits wide. The shifts by 32 and 40 are thus larger than we support. Cast the sector offset to a u64 to avoid these warnings. Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index df46b5a3f56f..faa5591b579f 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -2439,7 +2439,7 @@ static int mtip_hw_ioctl(struct driver_data *dd, unsigned int cmd, * return value * None */ -static void mtip_hw_submit_io(struct driver_data *dd, sector_t start, +static void mtip_hw_submit_io(struct driver_data *dd, sector_t sector, int nsect, int nents, int tag, void *callback, void *data, int dir) { @@ -2447,6 +2447,7 @@ static void mtip_hw_submit_io(struct driver_data *dd, sector_t start, struct mtip_port *port = dd->port; struct mtip_cmd *command = &port->commands[tag]; int dma_dir = (dir == READ) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + u64 start = sector; /* Map the scatter list for DMA access */ nents = dma_map_sg(&dd->pdev->dev, command->sg, nents, dma_dir); -- cgit v1.2.3 From 298d80152c895859bd128552db7a5b228e8a23f7 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 8 Nov 2012 17:35:38 +0800 Subject: mtip32xx: fix potential NULL pointer dereference in mtip_timeout_function() The dereference to port should be moved below the NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index faa5591b579f..9694dd99bbbc 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -559,7 +559,7 @@ static void mtip_timeout_function(unsigned long int data) struct mtip_cmd *command; int tag, cmdto_cnt = 0; unsigned int bit, group; - unsigned int num_command_slots = port->dd->slot_groups * 32; + unsigned int num_command_slots; unsigned long to, tagaccum[SLOTBITS_IN_LONGS]; if (unlikely(!port)) @@ -572,6 +572,7 @@ static void mtip_timeout_function(unsigned long int data) } /* clear the tag accumulator */ memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long)); + num_command_slots = port->dd->slot_groups * 32; for (tag = 0; tag < num_command_slots; tag++) { /* -- cgit v1.2.3 From 11cfb6ff736dc89b0447b8902d6912692303f6af Mon Sep 17 00:00:00 2001 From: Ed Cashin Date: Thu, 8 Nov 2012 19:17:15 -0500 Subject: aoe: avoid running request handler on plugged queue Calling the request handler directly on a plugged queue defeats the performance improvements provided by the plugging mechanism. Use the __blk_run_queue function instead of calling the request handler directly, so that we don't interfere with the block layer's ability to plug the queue. Signed-off-by: Ed Cashin Signed-off-by: Jens Axboe --- drivers/block/aoe/aoecmd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c index 3804a0af3ef1..9fe4f1865558 100644 --- a/drivers/block/aoe/aoecmd.c +++ b/drivers/block/aoe/aoecmd.c @@ -935,7 +935,7 @@ aoe_end_request(struct aoedev *d, struct request *rq, int fastfail) /* cf. http://lkml.org/lkml/2006/10/31/28 */ if (!fastfail) - q->request_fn(q); + __blk_run_queue(q); } static void -- cgit v1.2.3 From 836413e8c78ecbc55aa31f3cb600f8ee1aa355a2 Mon Sep 17 00:00:00 2001 From: Selvan Mani Date: Wed, 14 Nov 2012 06:16:35 -0700 Subject: mtip32xx: Fix padding issue Hi Jens, Another tiny patch. Removed __packed before the struct smart_attr and added __packed at end of the structure to fix padding issue. Signed-off-by: Selvan Mani Signed-off-by: Asai Thambi S P Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h index 8498e99666b2..b1742640556a 100644 --- a/drivers/block/mtip32xx/mtip32xx.h +++ b/drivers/block/mtip32xx/mtip32xx.h @@ -155,14 +155,14 @@ enum { MTIP_DDF_REBUILD_FAILED_BIT = 8, }; -__packed struct smart_attr{ +struct smart_attr { u8 attr_id; u16 flags; u8 cur; u8 worst; u32 data; u8 res[3]; -}; +} __packed; /* Register Frame Information Structure (FIS), host to device. */ struct host_to_dev_fis { -- cgit v1.2.3 From b26623dab7eeb1e9f5898c7a49458789dd492f20 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Wed, 21 Nov 2012 10:07:29 +0000 Subject: 8139cp: revert "set ring address before enabling receiver" This patch reverts b01af4579ec41f48e9b9c774e70bd6474ad210db. The original patch was tested with emulated hardware. Real hardware chokes. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=47041 Signed-off-by: Francois Romieu Acked-by: Jeff Garzik Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139cp.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index 1c818254b7be..b01f83a044c4 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -979,17 +979,6 @@ static void cp_init_hw (struct cp_private *cp) cpw32_f (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0))); cpw32_f (MAC0 + 4, le32_to_cpu (*(__le32 *) (dev->dev_addr + 4))); - cpw32_f(HiTxRingAddr, 0); - cpw32_f(HiTxRingAddr + 4, 0); - - ring_dma = cp->ring_dma; - cpw32_f(RxRingAddr, ring_dma & 0xffffffff); - cpw32_f(RxRingAddr + 4, (ring_dma >> 16) >> 16); - - ring_dma += sizeof(struct cp_desc) * CP_RX_RING_SIZE; - cpw32_f(TxRingAddr, ring_dma & 0xffffffff); - cpw32_f(TxRingAddr + 4, (ring_dma >> 16) >> 16); - cp_start_hw(cp); cpw8(TxThresh, 0x06); /* XXX convert magic num to a constant */ @@ -1003,6 +992,17 @@ static void cp_init_hw (struct cp_private *cp) cpw8(Config5, cpr8(Config5) & PMEStatus); + cpw32_f(HiTxRingAddr, 0); + cpw32_f(HiTxRingAddr + 4, 0); + + ring_dma = cp->ring_dma; + cpw32_f(RxRingAddr, ring_dma & 0xffffffff); + cpw32_f(RxRingAddr + 4, (ring_dma >> 16) >> 16); + + ring_dma += sizeof(struct cp_desc) * CP_RX_RING_SIZE; + cpw32_f(TxRingAddr, ring_dma & 0xffffffff); + cpw32_f(TxRingAddr + 4, (ring_dma >> 16) >> 16); + cpw16(MultiIntr, 0); cpw8_f(Cfg9346, Cfg9346_Lock); -- cgit v1.2.3 From 4a25417c20fac00b3afd58ce27408f964d19e708 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Thu, 22 Nov 2012 07:16:17 +0000 Subject: bnx2x: remove redundant warning log fix bug where a register which was only meant to be read in 578xx/57712 devices causes a bogus error message to be logged when read from other devices. Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index bd1fd3d87c24..01611b33a93d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -9545,10 +9545,13 @@ static int __devinit bnx2x_prev_unload_common(struct bnx2x *bp) */ static void __devinit bnx2x_prev_interrupted_dmae(struct bnx2x *bp) { - u32 val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS); - if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) { - BNX2X_ERR("was error bit was found to be set in pglueb upon startup. Clearing"); - REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, 1 << BP_FUNC(bp)); + if (!CHIP_IS_E1x(bp)) { + u32 val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) { + BNX2X_ERR("was error bit was found to be set in pglueb upon startup. Clearing"); + REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, + 1 << BP_FUNC(bp)); + } } } -- cgit v1.2.3 From a7227a0faa117d0bc532aea546ae5ac5f89e8ed7 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 23 Nov 2012 20:55:06 +0100 Subject: PM / QoS: fix wrong error-checking condition dev_pm_qos_add_request() can return 0, 1, or a negative error code, therefore the correct error test is "if (error < 0)." Checking just for non-zero return code leads to erroneous setting of the req->dev pointer to NULL, which then leads to a repeated call to dev_pm_qos_add_ancestor_request() in st1232_ts_irq_handler(). This in turn leads to an Oops, when the I2C host adapter is unloaded and reloaded again because of the inconsistent state of its QoS request list. Signed-off-by: Guennadi Liakhovetski Cc: Signed-off-by: Rafael J. Wysocki --- drivers/base/power/qos.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/base/power/qos.c b/drivers/base/power/qos.c index 74a67e0019a2..fbbd4ed2edf2 100644 --- a/drivers/base/power/qos.c +++ b/drivers/base/power/qos.c @@ -451,7 +451,7 @@ int dev_pm_qos_add_ancestor_request(struct device *dev, if (ancestor) error = dev_pm_qos_add_request(ancestor, req, value); - if (error) + if (error < 0) req->dev = NULL; return error; -- cgit v1.2.3 From 6567d748c4e94e3481e523803ec07ebd825c80d6 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 10 Nov 2012 10:00:06 +0000 Subject: Revert "drm/i915: enable rc6 on ilk again" Even with the cumulative set of ilk w/a, rc6 is demonstrably still failing and causing GPU hangs as found by Peter Wu. So we need to disable it again until it is stable. This reverts commit 456470eb583f063ee84c6818251e638598be0fb8 Author: Daniel Vetter Date: Wed Aug 8 23:35:40 2012 +0200 drm/i915: enable rc6 on ilk again and the follow-on commit cd7988eea561a70a4f98e431c1395f913672d626 Author: Daniel Vetter Date: Sun Aug 26 20:33:18 2012 +0200 drm/i915: disable rc6 on ilk when vt-d is enabled Note: The situation around the gen4/5 gpu hangs that cropped up in 3.7 is rather strange. Most useful bisects have lead to commit 6c085a728cf000ac1865d66f8c9b52935558b328 Author: Chris Wilson Date: Mon Aug 20 11:40:46 2012 +0200 drm/i915: Track unbound pages or even later commits that affect the gem bo recycling, which all is way past the point where we re-enabled rc6. But somehow reverting/disabling those commits doesn't help, but disabling rc6 at least helps for many hangs on ilk. Obviously it doesn't change anything at all on gen4, and there are still strange issues left on gen5 (which we unfortunately can't readily reproduce). Also, the error_state signature of the hangs which can be fixed with this patch look remarkably different to those which seem to be unaffected by the rc6 settings: The rc6 hangs are in the ring, somewhere in the MI_FLUSH/PIPE_CONTROL sequence to make ilk coherent, wheras all the other hangs tend to be at a random point in the middle of the user batch. So it could also be that we have different issues. Until we grow more clue, this at least helps some users. Reported-by: Peter Wu References: https://bugs.freedesktop.org/show_bug.cgi?id=55984 Signed-off-by: Chris Wilson [danvet: Added note with some more details about the gen4/5 3.7 gpu hang regression.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_pm.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 72f41aaa71ff..442968f8b201 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -2373,15 +2373,9 @@ int intel_enable_rc6(const struct drm_device *dev) if (i915_enable_rc6 >= 0) return i915_enable_rc6; - if (INTEL_INFO(dev)->gen == 5) { -#ifdef CONFIG_INTEL_IOMMU - /* Disable rc6 on ilk if VT-d is on. */ - if (intel_iommu_gfx_mapped) - return false; -#endif - DRM_DEBUG_DRIVER("Ironlake: only RC6 available\n"); - return INTEL_RC6_ENABLE; - } + /* Disable RC6 on Ironlake */ + if (INTEL_INFO(dev)->gen == 5) + return 0; if (IS_HASWELL(dev)) { DRM_DEBUG_DRIVER("Haswell: only RC6 available\n"); -- cgit v1.2.3 From 97d66c47277fc801bc1ee93559a848057181ea55 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Thu, 22 Nov 2012 06:17:19 -0300 Subject: [media] s5p-fimc: Prevent race conditions during subdevs registration Make sure when fimc and fimc-lite capture video node is registered it has valid pipeline_ops assigned to it. Otherwise when a video node is opened right after is was registered there, might be an attempt to use ops that are just being assigned, after function v4l2_device_register_subdev() returns. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/s5p-fimc/fimc-capture.c | 7 ++++++- drivers/media/platform/s5p-fimc/fimc-lite.c | 3 +++ drivers/media/platform/s5p-fimc/fimc-mdevice.c | 4 ++-- 3 files changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/s5p-fimc/fimc-capture.c b/drivers/media/platform/s5p-fimc/fimc-capture.c index 3d39d97abaa5..3fc896b8eeae 100644 --- a/drivers/media/platform/s5p-fimc/fimc-capture.c +++ b/drivers/media/platform/s5p-fimc/fimc-capture.c @@ -1774,9 +1774,13 @@ static int fimc_capture_subdev_registered(struct v4l2_subdev *sd) if (ret) return ret; + fimc->pipeline_ops = v4l2_get_subdev_hostdata(sd); + ret = fimc_register_capture_device(fimc, sd->v4l2_dev); - if (ret) + if (ret) { fimc_unregister_m2m_device(fimc); + fimc->pipeline_ops = NULL; + } return ret; } @@ -1793,6 +1797,7 @@ static void fimc_capture_subdev_unregistered(struct v4l2_subdev *sd) if (video_is_registered(&fimc->vid_cap.vfd)) { video_unregister_device(&fimc->vid_cap.vfd); media_entity_cleanup(&fimc->vid_cap.vfd.entity); + fimc->pipeline_ops = NULL; } kfree(fimc->vid_cap.ctx); fimc->vid_cap.ctx = NULL; diff --git a/drivers/media/platform/s5p-fimc/fimc-lite.c b/drivers/media/platform/s5p-fimc/fimc-lite.c index 9db246bed841..23f203e8a7d3 100644 --- a/drivers/media/platform/s5p-fimc/fimc-lite.c +++ b/drivers/media/platform/s5p-fimc/fimc-lite.c @@ -1263,10 +1263,12 @@ static int fimc_lite_subdev_registered(struct v4l2_subdev *sd) return ret; video_set_drvdata(vfd, fimc); + fimc->pipeline_ops = v4l2_get_subdev_hostdata(sd); ret = video_register_device(vfd, VFL_TYPE_GRABBER, -1); if (ret < 0) { media_entity_cleanup(&vfd->entity); + fimc->pipeline_ops = NULL; return ret; } @@ -1285,6 +1287,7 @@ static void fimc_lite_subdev_unregistered(struct v4l2_subdev *sd) if (video_is_registered(&fimc->vfd)) { video_unregister_device(&fimc->vfd); media_entity_cleanup(&fimc->vfd.entity); + fimc->pipeline_ops = NULL; } } diff --git a/drivers/media/platform/s5p-fimc/fimc-mdevice.c b/drivers/media/platform/s5p-fimc/fimc-mdevice.c index 38ea4d143a49..0531ab70a94c 100644 --- a/drivers/media/platform/s5p-fimc/fimc-mdevice.c +++ b/drivers/media/platform/s5p-fimc/fimc-mdevice.c @@ -352,6 +352,7 @@ static int fimc_register_callback(struct device *dev, void *p) sd = &fimc->vid_cap.subdev; sd->grp_id = FIMC_GROUP_ID; + v4l2_set_subdev_hostdata(sd, (void *)&fimc_pipeline_ops); ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd); if (ret) { @@ -360,7 +361,6 @@ static int fimc_register_callback(struct device *dev, void *p) return ret; } - fimc->pipeline_ops = &fimc_pipeline_ops; fmd->fimc[fimc->id] = fimc; return 0; } @@ -375,6 +375,7 @@ static int fimc_lite_register_callback(struct device *dev, void *p) return 0; fimc->subdev.grp_id = FLITE_GROUP_ID; + v4l2_set_subdev_hostdata(&fimc->subdev, (void *)&fimc_pipeline_ops); ret = v4l2_device_register_subdev(&fmd->v4l2_dev, &fimc->subdev); if (ret) { @@ -384,7 +385,6 @@ static int fimc_lite_register_callback(struct device *dev, void *p) return ret; } - fimc->pipeline_ops = &fimc_pipeline_ops; fmd->fimc_lite[fimc->index] = fimc; return 0; } -- cgit v1.2.3 From ba6b372cf0af564bdc6c14bf68e078ae34bef222 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Thu, 22 Nov 2012 11:12:16 -0300 Subject: [media] s5p-fimc: Don't use mutex_lock_interruptible() in device release() Use uninterruptible mutex_lock in the release() file op to make sure all resources are properly freed when a process is being terminated. Returning -ERESTARTSYS has no effect for a terminating process and this caused driver resources not to be released. Not releasing the buffer queue also prevented other drivers to free memory, e.g. in MMAP -> USERPTR scenario. This patch is required for stable kernels v3.6+. Reported-by: Kamil Debski Reported-by: Marek Szyprowski Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/s5p-fimc/fimc-capture.c | 3 +-- drivers/media/platform/s5p-fimc/fimc-m2m.c | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/s5p-fimc/fimc-capture.c b/drivers/media/platform/s5p-fimc/fimc-capture.c index 3fc896b8eeae..891ee873c62b 100644 --- a/drivers/media/platform/s5p-fimc/fimc-capture.c +++ b/drivers/media/platform/s5p-fimc/fimc-capture.c @@ -556,8 +556,7 @@ static int fimc_capture_close(struct file *file) dbg("pid: %d, state: 0x%lx", task_pid_nr(current), fimc->state); - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; + mutex_lock(&fimc->lock); if (--fimc->vid_cap.refcnt == 0) { clear_bit(ST_CAPT_BUSY, &fimc->state); diff --git a/drivers/media/platform/s5p-fimc/fimc-m2m.c b/drivers/media/platform/s5p-fimc/fimc-m2m.c index 4500e44f6857..62afed3162ea 100644 --- a/drivers/media/platform/s5p-fimc/fimc-m2m.c +++ b/drivers/media/platform/s5p-fimc/fimc-m2m.c @@ -718,8 +718,7 @@ static int fimc_m2m_release(struct file *file) dbg("pid: %d, state: 0x%lx, refcnt= %d", task_pid_nr(current), fimc->state, fimc->m2m.refcnt); - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; + mutex_lock(&fimc->lock); v4l2_m2m_ctx_release(ctx->m2m_ctx); fimc_ctrls_delete(ctx); -- cgit v1.2.3 From ddc43d6dc7df0849fe41b91460fa76145cf87b67 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Thu, 22 Nov 2012 11:13:04 -0300 Subject: [media] fimc-lite: Don't use mutex_lock_interruptible() in device release() Use uninterruptible mutex_lock in the release() file op to make sure all resources are properly freed when a process is being terminated. Returning -ERESTARTSYS has no effect for a terminating process and this may cause driver resources not to be released. This patch is required for stable kernels v3.5+. Reported-by: Marek Szyprowski Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/s5p-fimc/fimc-lite.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/s5p-fimc/fimc-lite.c b/drivers/media/platform/s5p-fimc/fimc-lite.c index 23f203e8a7d3..1b309a72f09f 100644 --- a/drivers/media/platform/s5p-fimc/fimc-lite.c +++ b/drivers/media/platform/s5p-fimc/fimc-lite.c @@ -491,8 +491,7 @@ static int fimc_lite_close(struct file *file) struct fimc_lite *fimc = video_drvdata(file); int ret; - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; + mutex_lock(&fimc->lock); if (--fimc->ref_count == 0 && fimc->out_path == FIMC_IO_DMA) { clear_bit(ST_FLITE_IN_USE, &fimc->state); -- cgit v1.2.3 From 9868018045c555c7a724c0cb7eeb0caeba9d43ff Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 21 Nov 2012 11:46:43 -0300 Subject: [media] exynos-gsc: Don't use mutex_lock_interruptible() in device release() Use uninterruptible mutex_lock in the release() file op to make sure all resources are properly freed when a process is being terminated. Returning -ERESTARTSYS has no effect for a terminating process and this may cause driver resources not to be released. Reported-by: Marek Szyprowski Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/exynos-gsc/gsc-m2m.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/exynos-gsc/gsc-m2m.c b/drivers/media/platform/exynos-gsc/gsc-m2m.c index 3c7f00577bd9..2650be3ccd5a 100644 --- a/drivers/media/platform/exynos-gsc/gsc-m2m.c +++ b/drivers/media/platform/exynos-gsc/gsc-m2m.c @@ -657,8 +657,7 @@ static int gsc_m2m_release(struct file *file) pr_debug("pid: %d, state: 0x%lx, refcnt= %d", task_pid_nr(current), gsc->state, gsc->m2m.refcnt); - if (mutex_lock_interruptible(&gsc->lock)) - return -ERESTARTSYS; + mutex_lock(&gsc->lock); v4l2_m2m_ctx_release(ctx->m2m_ctx); gsc_ctrls_delete(ctx); -- cgit v1.2.3 From bca36481e6fdc8e64f5837bc1d7f9752f3437c63 Mon Sep 17 00:00:00 2001 From: Shaik Ameer Basha Date: Wed, 7 Nov 2012 03:38:31 -0300 Subject: [media] exynos-gsc: Fix settings for input and output image RGB type Macros used to set input and output RGB type aren't correct. Updating the macros as per register manual. Signed-off-by: Shaik Ameer Basha Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/exynos-gsc/gsc-regs.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/exynos-gsc/gsc-regs.h b/drivers/media/platform/exynos-gsc/gsc-regs.h index 533e9947a925..4678f9a6a4fd 100644 --- a/drivers/media/platform/exynos-gsc/gsc-regs.h +++ b/drivers/media/platform/exynos-gsc/gsc-regs.h @@ -40,10 +40,10 @@ #define GSC_IN_ROT_YFLIP (2 << 16) #define GSC_IN_ROT_XFLIP (1 << 16) #define GSC_IN_RGB_TYPE_MASK (3 << 14) -#define GSC_IN_RGB_HD_WIDE (3 << 14) -#define GSC_IN_RGB_HD_NARROW (2 << 14) -#define GSC_IN_RGB_SD_WIDE (1 << 14) -#define GSC_IN_RGB_SD_NARROW (0 << 14) +#define GSC_IN_RGB_HD_NARROW (3 << 14) +#define GSC_IN_RGB_HD_WIDE (2 << 14) +#define GSC_IN_RGB_SD_NARROW (1 << 14) +#define GSC_IN_RGB_SD_WIDE (0 << 14) #define GSC_IN_YUV422_1P_ORDER_MASK (1 << 13) #define GSC_IN_YUV422_1P_ORDER_LSB_Y (0 << 13) #define GSC_IN_YUV422_1P_OEDER_LSB_C (1 << 13) @@ -85,10 +85,10 @@ #define GSC_OUT_GLOBAL_ALPHA_MASK (0xff << 24) #define GSC_OUT_GLOBAL_ALPHA(x) ((x) << 24) #define GSC_OUT_RGB_TYPE_MASK (3 << 10) -#define GSC_OUT_RGB_HD_NARROW (3 << 10) -#define GSC_OUT_RGB_HD_WIDE (2 << 10) -#define GSC_OUT_RGB_SD_NARROW (1 << 10) -#define GSC_OUT_RGB_SD_WIDE (0 << 10) +#define GSC_OUT_RGB_HD_WIDE (3 << 10) +#define GSC_OUT_RGB_HD_NARROW (2 << 10) +#define GSC_OUT_RGB_SD_WIDE (1 << 10) +#define GSC_OUT_RGB_SD_NARROW (0 << 10) #define GSC_OUT_YUV422_1P_ORDER_MASK (1 << 9) #define GSC_OUT_YUV422_1P_ORDER_LSB_Y (0 << 9) #define GSC_OUT_YUV422_1P_OEDER_LSB_C (1 << 9) -- cgit v1.2.3 From 24fc681a8ea6efa6bd7d6f366824a31addad2203 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Sat, 10 Nov 2012 19:57:56 -0300 Subject: [media] exynos-gsc: Add missing video device vfl_dir flag initialization vfl_dir should be set to VFL_DIR_M2M so valid ioctls for this mem-to-mem device can be properly determined in the v4l2 core. Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/exynos-gsc/gsc-m2m.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/platform/exynos-gsc/gsc-m2m.c b/drivers/media/platform/exynos-gsc/gsc-m2m.c index 2650be3ccd5a..c065d040ed94 100644 --- a/drivers/media/platform/exynos-gsc/gsc-m2m.c +++ b/drivers/media/platform/exynos-gsc/gsc-m2m.c @@ -731,6 +731,7 @@ int gsc_register_m2m_device(struct gsc_dev *gsc) gsc->vdev.ioctl_ops = &gsc_m2m_ioctl_ops; gsc->vdev.release = video_device_release_empty; gsc->vdev.lock = &gsc->lock; + gsc->vdev.vfl_dir = VFL_DIR_M2M; snprintf(gsc->vdev.name, sizeof(gsc->vdev.name), "%s.%d:m2m", GSC_MODULE_NAME, gsc->id); -- cgit v1.2.3 From d9acbe1ace5cacc5e104443d94c7402c7fb9dcf9 Mon Sep 17 00:00:00 2001 From: Arun Kumar K Date: Mon, 5 Nov 2012 05:14:03 -0300 Subject: [media] s5p-mfc: Bug fix of timestamp/timecode copy mechanism Modified the function s5p_mfc_get_dec_y_adr_v6 to access the decode Y address register instead of display Y address. Signed-off-by: Sunil Mazhavanchery Signed-off-by: Arun Kumar K Acked-by: Kamil Debski Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c index 50b5bee3c44e..3a8cfd9fc1bd 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c @@ -1762,7 +1762,7 @@ int s5p_mfc_get_dspl_y_adr_v6(struct s5p_mfc_dev *dev) int s5p_mfc_get_dec_y_adr_v6(struct s5p_mfc_dev *dev) { - return mfc_read(dev, S5P_FIMV_D_DISPLAY_LUMA_ADDR_V6); + return mfc_read(dev, S5P_FIMV_D_DECODED_LUMA_ADDR_V6); } int s5p_mfc_get_dspl_status_v6(struct s5p_mfc_dev *dev) -- cgit v1.2.3 From d2a0db1ee01aea154ccc460e45a16857e32c4427 Mon Sep 17 00:00:00 2001 From: Arun Kumar K Date: Wed, 14 Nov 2012 09:26:45 -0300 Subject: [media] s5p-mfc: Handle multi-frame input buffer When one input buffer has multiple frames, it should be fed again to the hardware with the remaining bytes. Removed the check for P frame in this scenario as this condition can come with all frame types. Signed-off-by: Arun Kumar K Signed-off-by: ARUN MANKUZHI Acked-by: Kamil Debski Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/s5p-mfc/s5p_mfc.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c index 130f4ac8649e..3afe879d54d7 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c @@ -381,11 +381,8 @@ static void s5p_mfc_handle_frame(struct s5p_mfc_ctx *ctx, ctx->consumed_stream += s5p_mfc_hw_call(dev->mfc_ops, get_consumed_stream, dev); if (ctx->codec_mode != S5P_MFC_CODEC_H264_DEC && - s5p_mfc_hw_call(dev->mfc_ops, - get_dec_frame_type, dev) == - S5P_FIMV_DECODE_FRAME_P_FRAME - && ctx->consumed_stream + STUFF_BYTE < - src_buf->b->v4l2_planes[0].bytesused) { + ctx->consumed_stream + STUFF_BYTE < + src_buf->b->v4l2_planes[0].bytesused) { /* Run MFC again on the same buffer */ mfc_debug(2, "Running again the same buffer\n"); ctx->after_packed_pb = 1; -- cgit v1.2.3 From c9faaa09e2a1335678f09c70a0d0eda095564bab Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Wed, 21 Nov 2012 22:43:59 +0100 Subject: can: peak_usb: fix hwtstamp assignment The skb->tstamp is set to the hardware timestamp when available in the USB urb message. This leads to user visible timestamps which contain the 'uptime' of the USB adapter - and not the usual system generated timestamp. Fix this wrong assignment by applying the available hardware timestamp to the skb_shared_hwtstamps data structure - which is intended for this purpose. Cc: linux-stable Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/peak_usb/pcan_usb.c | 8 ++++++-- drivers/net/can/usb/peak_usb/pcan_usb_pro.c | 8 ++++++-- 2 files changed, 12 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/usb/peak_usb/pcan_usb.c b/drivers/net/can/usb/peak_usb/pcan_usb.c index 86f26a1ede4c..25723d8ee201 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb.c @@ -519,8 +519,10 @@ static int pcan_usb_decode_error(struct pcan_usb_msg_context *mc, u8 n, mc->pdev->dev.can.state = new_state; if (status_len & PCAN_USB_STATUSLEN_TIMESTAMP) { + struct skb_shared_hwtstamps *hwts = skb_hwtstamps(skb); + peak_usb_get_ts_tv(&mc->pdev->time_ref, mc->ts16, &tv); - skb->tstamp = timeval_to_ktime(tv); + hwts->hwtstamp = timeval_to_ktime(tv); } netif_rx(skb); @@ -605,6 +607,7 @@ static int pcan_usb_decode_data(struct pcan_usb_msg_context *mc, u8 status_len) struct sk_buff *skb; struct can_frame *cf; struct timeval tv; + struct skb_shared_hwtstamps *hwts; skb = alloc_can_skb(mc->netdev, &cf); if (!skb) @@ -652,7 +655,8 @@ static int pcan_usb_decode_data(struct pcan_usb_msg_context *mc, u8 status_len) /* convert timestamp into kernel time */ peak_usb_get_ts_tv(&mc->pdev->time_ref, mc->ts16, &tv); - skb->tstamp = timeval_to_ktime(tv); + hwts = skb_hwtstamps(skb); + hwts->hwtstamp = timeval_to_ktime(tv); /* push the skb */ netif_rx(skb); diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c index e1626d92511a..30d79bfa5b10 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c @@ -532,6 +532,7 @@ static int pcan_usb_pro_handle_canmsg(struct pcan_usb_pro_interface *usb_if, struct can_frame *can_frame; struct sk_buff *skb; struct timeval tv; + struct skb_shared_hwtstamps *hwts; skb = alloc_can_skb(netdev, &can_frame); if (!skb) @@ -549,7 +550,8 @@ static int pcan_usb_pro_handle_canmsg(struct pcan_usb_pro_interface *usb_if, memcpy(can_frame->data, rx->data, can_frame->can_dlc); peak_usb_get_ts_tv(&usb_if->time_ref, le32_to_cpu(rx->ts32), &tv); - skb->tstamp = timeval_to_ktime(tv); + hwts = skb_hwtstamps(skb); + hwts->hwtstamp = timeval_to_ktime(tv); netif_rx(skb); netdev->stats.rx_packets++; @@ -570,6 +572,7 @@ static int pcan_usb_pro_handle_error(struct pcan_usb_pro_interface *usb_if, u8 err_mask = 0; struct sk_buff *skb; struct timeval tv; + struct skb_shared_hwtstamps *hwts; /* nothing should be sent while in BUS_OFF state */ if (dev->can.state == CAN_STATE_BUS_OFF) @@ -664,7 +667,8 @@ static int pcan_usb_pro_handle_error(struct pcan_usb_pro_interface *usb_if, dev->can.state = new_state; peak_usb_get_ts_tv(&usb_if->time_ref, le32_to_cpu(er->ts32), &tv); - skb->tstamp = timeval_to_ktime(tv); + hwts = skb_hwtstamps(skb); + hwts->hwtstamp = timeval_to_ktime(tv); netif_rx(skb); netdev->stats.rx_packets++; netdev->stats.rx_bytes += can_frame->can_dlc; -- cgit v1.2.3 From 874807a83139abc094f939e93623c5623573d543 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 27 Nov 2012 12:14:40 +1100 Subject: md/raid1{,0}: fix deadlock in bitmap_unplug. If the raid1 or raid10 unplug function gets called from a make_request function (which is very possible) when there are bios on the current->bio_list list, then it will not be able to successfully call bitmap_unplug() and it could need to submit more bios and wait for them to complete. But they won't complete while current->bio_list is non-empty. So detect that case and handle the unplugging off to another thread just like we already do when called from within the scheduler. RAID1 version of bug was introduced in 3.6, so that part of fix is suitable for 3.6.y. RAID10 part won't apply. Cc: stable@vger.kernel.org Reported-by: Torsten Kaiser Reported-by: Peter Maloney Signed-off-by: NeilBrown --- drivers/md/raid1.c | 2 +- drivers/md/raid10.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 636bae0405e8..a0f73092176e 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -963,7 +963,7 @@ static void raid1_unplug(struct blk_plug_cb *cb, bool from_schedule) struct r1conf *conf = mddev->private; struct bio *bio; - if (from_schedule) { + if (from_schedule || current->bio_list) { spin_lock_irq(&conf->device_lock); bio_list_merge(&conf->pending_bio_list, &plug->pending); conf->pending_count += plug->pending_cnt; diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 0d5d0ff2c0f7..c9acbd717131 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1069,7 +1069,7 @@ static void raid10_unplug(struct blk_plug_cb *cb, bool from_schedule) struct r10conf *conf = mddev->private; struct bio *bio; - if (from_schedule) { + if (from_schedule || current->bio_list) { spin_lock_irq(&conf->device_lock); bio_list_merge(&conf->pending_bio_list, &plug->pending); conf->pending_count += plug->pending_cnt; -- cgit v1.2.3 From 82b212f40059bffd6808c07266a942d444d5558a Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Mon, 26 Nov 2012 16:29:45 -0800 Subject: Revert "mm: remove __GFP_NO_KSWAPD" With "mm: vmscan: scale number of pages reclaimed by reclaim/compaction based on failures" reverted, Zdenek Kabelac reported the following Hmm, so it's just took longer to hit the problem and observe kswapd0 spinning on my CPU again - it's not as endless like before - but still it easily eats minutes - it helps to turn off Firefox or TB (memory hungry apps) so kswapd0 stops soon - and restart those apps again. (And I still have like >1GB of cached memory) kswapd0 R running task 0 30 2 0x00000000 Call Trace: preempt_schedule+0x42/0x60 _raw_spin_unlock+0x55/0x60 put_super+0x31/0x40 drop_super+0x22/0x30 prune_super+0x149/0x1b0 shrink_slab+0xba/0x510 The sysrq+m indicates the system has no swap so it'll never reclaim anonymous pages as part of reclaim/compaction. That is one part of the problem but not the root cause as file-backed pages could also be reclaimed. The likely underlying problem is that kswapd is woken up or kept awake for each THP allocation request in the page allocator slow path. If compaction fails for the requesting process then compaction will be deferred for a time and direct reclaim is avoided. However, if there are a storm of THP requests that are simply rejected, it will still be the the case that kswapd is awake for a prolonged period of time as pgdat->kswapd_max_order is updated each time. This is noticed by the main kswapd() loop and it will not call kswapd_try_to_sleep(). Instead it will loopp, shrinking a small number of pages and calling shrink_slab() on each iteration. The temptation is to supply a patch that checks if kswapd was woken for THP and if so ignore pgdat->kswapd_max_order but it'll be a hack and not backed up by proper testing. As 3.7 is very close to release and this is not a bug we should release with, a safer path is to revert "mm: remove __GFP_NO_KSWAPD" for now and revisit it with the view to ironing out the balance_pgdat() logic in general. Signed-off-by: Mel Gorman Cc: Zdenek Kabelac Cc: Seth Jennings Cc: Valdis Kletnieks Cc: Jiri Slaby Cc: Rik van Riel Cc: Robert Jennings Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mtd/mtdcore.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 374c46dff7dd..ec794a72975d 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -1077,7 +1077,8 @@ EXPORT_SYMBOL_GPL(mtd_writev); * until the request succeeds or until the allocation size falls below * the system page size. This attempts to make sure it does not adversely * impact system performance, so when allocating more than one page, we - * ask the memory allocator to avoid re-trying. + * ask the memory allocator to avoid re-trying, swapping, writing back + * or performing I/O. * * Note, this function also makes sure that the allocated buffer is aligned to * the MTD device's min. I/O unit, i.e. the "mtd->writesize" value. @@ -1091,7 +1092,8 @@ EXPORT_SYMBOL_GPL(mtd_writev); */ void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size) { - gfp_t flags = __GFP_NOWARN | __GFP_WAIT | __GFP_NORETRY; + gfp_t flags = __GFP_NOWARN | __GFP_WAIT | + __GFP_NORETRY | __GFP_NO_KSWAPD; size_t min_alloc = max_t(size_t, mtd->writesize, PAGE_SIZE); void *kbuf; -- cgit v1.2.3 From fc58acdbf153f12783b80cb19c04cc9de121b518 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Tue, 27 Nov 2012 16:12:29 -0500 Subject: radeon: fix pll/ctrc mapping on dce2 and dce3 hardware This fix black screen on resume issue that some people are experiencing. There is a bug in the atombios code regarding pll/crtc mapping. The atombios code reverse the logic for the pll and crtc mapping. agd5f: drop unnecessary crtc id check, cc stable in case we miss 3.7. This fixes the root cause that was worked around by commits: drm/radeon: allocate PPLLs from low to high drm/radeon/dce3: switch back to old pll allocation order for discrete Signed-off-by: Jerome Glisse Reviewed-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/atombios_crtc.c | 48 ++++++++++------------------------ 1 file changed, 14 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 3bce0299f64a..24d932f53203 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1696,42 +1696,22 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc) return ATOM_PPLL2; DRM_ERROR("unable to allocate a PPLL\n"); return ATOM_PPLL_INVALID; - } else if (ASIC_IS_AVIVO(rdev)) { - /* in DP mode, the DP ref clock can come from either PPLL - * depending on the asic: - * DCE3: PPLL1 or PPLL2 - */ - if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(radeon_crtc->encoder))) { - /* use the same PPLL for all DP monitors */ - pll = radeon_get_shared_dp_ppll(crtc); - if (pll != ATOM_PPLL_INVALID) - return pll; - } else { - /* use the same PPLL for all monitors with the same clock */ - pll = radeon_get_shared_nondp_ppll(crtc); - if (pll != ATOM_PPLL_INVALID) - return pll; - } - /* all other cases */ - pll_in_use = radeon_get_pll_use_mask(crtc); - /* the order shouldn't matter here, but we probably - * need this until we have atomic modeset - */ - if (rdev->flags & RADEON_IS_IGP) { - if (!(pll_in_use & (1 << ATOM_PPLL1))) - return ATOM_PPLL1; - if (!(pll_in_use & (1 << ATOM_PPLL2))) - return ATOM_PPLL2; - } else { - if (!(pll_in_use & (1 << ATOM_PPLL2))) - return ATOM_PPLL2; - if (!(pll_in_use & (1 << ATOM_PPLL1))) - return ATOM_PPLL1; - } - DRM_ERROR("unable to allocate a PPLL\n"); - return ATOM_PPLL_INVALID; } else { /* on pre-R5xx asics, the crtc to pll mapping is hardcoded */ + /* some atombios (observed in some DCE2/DCE3) code have a bug, + * the matching btw pll and crtc is done through + * PCLK_CRTC[1|2]_CNTL (0x480/0x484) but atombios code use the + * pll (1 or 2) to select which register to write. ie if using + * pll1 it will use PCLK_CRTC1_CNTL (0x480) and if using pll2 + * it will use PCLK_CRTC2_CNTL (0x484), it then use crtc id to + * choose which value to write. Which is reverse order from + * register logic. So only case that works is when pllid is + * same as crtcid or when both pll and crtc are enabled and + * both use same clock. + * + * So just return crtc id as if crtc and pll were hard linked + * together even if they aren't + */ return radeon_crtc->crtc_id; } } -- cgit v1.2.3 From 42709efb3a47524c6252e1bdc85e205f7bc356fb Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Tue, 16 Oct 2012 09:02:27 -0400 Subject: i7core_edac: fix panic when accessing sysfs files The i7core_edac addrmatch_dev and chancounts_dev have sysfs files associated with them. The sysfs files, however, are coded so that the parent device is is the mci device. This is incorrect and the mci struct should be obtained through the addrmatch_dev and chancounts_dev device's private data field which is populated in i7core_create_sysfs_devices(). Signed-off-by: Prarit Bhargava Signed-off-by: Mauro Carvalho Chehab --- drivers/edac/i7core_edac.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c index 3672101023bd..10c8c00d6469 100644 --- a/drivers/edac/i7core_edac.c +++ b/drivers/edac/i7core_edac.c @@ -816,7 +816,7 @@ static ssize_t i7core_inject_store_##param( \ struct device_attribute *mattr, \ const char *data, size_t count) \ { \ - struct mem_ctl_info *mci = to_mci(dev); \ + struct mem_ctl_info *mci = dev_get_drvdata(dev); \ struct i7core_pvt *pvt; \ long value; \ int rc; \ @@ -845,7 +845,7 @@ static ssize_t i7core_inject_show_##param( \ struct device_attribute *mattr, \ char *data) \ { \ - struct mem_ctl_info *mci = to_mci(dev); \ + struct mem_ctl_info *mci = dev_get_drvdata(dev); \ struct i7core_pvt *pvt; \ \ pvt = mci->pvt_info; \ @@ -1052,7 +1052,7 @@ static ssize_t i7core_show_counter_##param( \ struct device_attribute *mattr, \ char *data) \ { \ - struct mem_ctl_info *mci = to_mci(dev); \ + struct mem_ctl_info *mci = dev_get_drvdata(dev); \ struct i7core_pvt *pvt = mci->pvt_info; \ \ edac_dbg(1, "\n"); \ -- cgit v1.2.3 From 29bb8f4a8d94d017700d09ee643483b0708cbd7b Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Wed, 28 Nov 2012 13:43:15 +0200 Subject: net/mlx4_en: Can set maxrate only for TC0 Had a typo in memcpy. Signed-off-by: Amir Vadai Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c index 5d36795877cb..b799ab12a291 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c @@ -237,7 +237,7 @@ static int mlx4_en_dcbnl_ieee_setmaxrate(struct net_device *dev, if (err) return err; - memcpy(priv->maxrate, tmp, sizeof(*priv->maxrate)); + memcpy(priv->maxrate, tmp, sizeof(priv->maxrate)); return 0; } -- cgit v1.2.3 From ba695af067f9cadfec84457ac06b44e3fa849b15 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Sun, 25 Nov 2012 06:03:59 +0000 Subject: net: qmi_wwan: add Huawei E173 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Huawei E173 is a QMI/wwan device which normally appear as 12d1:1436 in Linux. The descriptors displayed in that mode will be picked up by cdc_ether. But the modem has another mode with a different device ID and a slightly different set of descriptors. This is the mode used by Windows like this: 3Modem: USB\VID_12D1&PID_140C&MI_00\6&3A1D2012&0&0000 Networkcard: USB\VID_12D1&PID_140C&MI_01\6&3A1D2012&0&0001 Appli.Inter: USB\VID_12D1&PID_140C&MI_02\6&3A1D2012&0&0002 PC UI Inter: USB\VID_12D1&PID_140C&MI_03\6&3A1D2012&0&0003 Reported-by: Thomas Schäfer Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 3b566fa0f8e6..1ea91f4237f0 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -385,6 +385,7 @@ static const struct usb_device_id products[] = { }, /* 3. Combined interface devices matching on interface number */ + {QMI_FIXED_INTF(0x12d1, 0x140c, 1)}, /* Huawei E173 */ {QMI_FIXED_INTF(0x19d2, 0x0002, 1)}, {QMI_FIXED_INTF(0x19d2, 0x0012, 1)}, {QMI_FIXED_INTF(0x19d2, 0x0017, 3)}, -- cgit v1.2.3 From bd97120fc3d1a11f3124c7c9ba1d91f51829eb85 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 26 Nov 2012 05:57:27 +0000 Subject: vhost: fix length for cross region descriptor If a single descriptor crosses a region, the second chunk length should be decremented by size translated so far, instead it includes the full descriptor length. Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang Signed-off-by: David S. Miller --- drivers/vhost/vhost.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index 99ac2cb08b43..dedaf81d8f36 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -1076,7 +1076,7 @@ static int translate_desc(struct vhost_dev *dev, u64 addr, u32 len, } _iov = iov + ret; size = reg->memory_size - addr + reg->guest_phys_addr; - _iov->iov_len = min((u64)len, size); + _iov->iov_len = min((u64)len - s, size); _iov->iov_base = (void __user *)(unsigned long) (reg->userspace_addr + addr - reg->guest_phys_addr); s += size; -- cgit v1.2.3 From fcdc90b025e69a38f9ec2742df099c7ddaa331fe Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 27 Nov 2012 07:29:35 +0000 Subject: atm: forever loop loading ambassador firmware There was a forever loop introduced here when we converted this to request_firmware() back in 2008. Signed-off-by: Dan Carpenter Acked-by: Chas Williams Signed-off-by: David S. Miller --- drivers/atm/ambassador.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/atm/ambassador.c b/drivers/atm/ambassador.c index 89b30f32ba68..ff7bb8a42ed6 100644 --- a/drivers/atm/ambassador.c +++ b/drivers/atm/ambassador.c @@ -1961,6 +1961,7 @@ static int __devinit ucode_init (loader_block * lb, amb_dev * dev) { res = loader_verify(lb, dev, rec); if (res) break; + rec = ihex_next_binrec(rec); } release_firmware(fw); if (!res) -- cgit v1.2.3 From 3ed7147189d2fbe8ac6da95db2fd9d6d52f53ce9 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 28 Nov 2012 06:13:10 +0000 Subject: team: fix hw_features setup Do this in the same way bonding does. This fixed setup resolves performance issues when using some cards with certain offloading. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/team/team.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index d44cca327588..ad86660fb8f9 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1794,10 +1794,12 @@ static void team_setup(struct net_device *dev) dev->features |= NETIF_F_LLTX; dev->features |= NETIF_F_GRO; - dev->hw_features = NETIF_F_HW_VLAN_TX | + dev->hw_features = TEAM_VLAN_FEATURES | + NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER; + dev->hw_features &= ~(NETIF_F_ALL_CSUM & ~NETIF_F_HW_CSUM); dev->features |= dev->hw_features; } -- cgit v1.2.3 From dab55bbafdb491ce2c3f2d7136e54101e948b911 Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Mon, 12 Nov 2012 11:13:51 +0200 Subject: remoteproc: fix error path of ->find_vqs Eliminate an erroneous invocation of rproc_shutdown inside the error path of rproc_virtio_find_vqs. Reported-by: Ido Yariv Signed-off-by: Ohad Ben-Cohen --- drivers/remoteproc/remoteproc_virtio.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c index e7a4780e93db..9e198e590675 100644 --- a/drivers/remoteproc/remoteproc_virtio.c +++ b/drivers/remoteproc/remoteproc_virtio.c @@ -120,15 +120,11 @@ static struct virtqueue *rp_find_vq(struct virtio_device *vdev, return vq; } -static void rproc_virtio_del_vqs(struct virtio_device *vdev) +static void __rproc_virtio_del_vqs(struct virtio_device *vdev) { struct virtqueue *vq, *n; - struct rproc *rproc = vdev_to_rproc(vdev); struct rproc_vring *rvring; - /* power down the remote processor before deleting vqs */ - rproc_shutdown(rproc); - list_for_each_entry_safe(vq, n, &vdev->vqs, list) { rvring = vq->priv; rvring->vq = NULL; @@ -137,6 +133,16 @@ static void rproc_virtio_del_vqs(struct virtio_device *vdev) } } +static void rproc_virtio_del_vqs(struct virtio_device *vdev) +{ + struct rproc *rproc = vdev_to_rproc(vdev); + + /* power down the remote processor before deleting vqs */ + rproc_shutdown(rproc); + + __rproc_virtio_del_vqs(vdev); +} + static int rproc_virtio_find_vqs(struct virtio_device *vdev, unsigned nvqs, struct virtqueue *vqs[], vq_callback_t *callbacks[], @@ -163,7 +169,7 @@ static int rproc_virtio_find_vqs(struct virtio_device *vdev, unsigned nvqs, return 0; error: - rproc_virtio_del_vqs(vdev); + __rproc_virtio_del_vqs(vdev); return ret; } -- cgit v1.2.3 From fbb0c41b814d497c656fc7be9e35456f139cb2fb Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Thu, 29 Nov 2012 01:31:31 +0000 Subject: bonding: fix miimon and arp_interval delayed work race conditions First I would give three observations which will be used later. Observation 1: if (delayed_work_pending(wq)) cancel_delayed_work(wq) This usage is wrong because the pending bit is cleared just before the work's fn is executed and if the function re-arms itself we might end up with the work still running. It's safe to call cancel_delayed_work_sync() even if the work is not queued at all. Observation 2: Use of INIT_DELAYED_WORK() Work needs to be initialized only once prior to (de/en)queueing. Observation 3: IFF_UP is set only after ndo_open is called Related race conditions: 1. Race between bonding_store_miimon() and bonding_store_arp_interval() Because of Obs.1 we can end up having both works enqueued. 2. Multiple races with INIT_DELAYED_WORK() Since the works are not protected by anything between INIT_DELAYED_WORK() and calls to (en/de)queue it is possible for races between the following functions: (races are also possible between the calls to INIT_DELAYED_WORK() and workqueue code) bonding_store_miimon() - bonding_store_arp_interval(), bond_close(), bond_open(), enqueued functions bonding_store_arp_interval() - bonding_store_miimon(), bond_close(), bond_open(), enqueued functions 3. By Obs.1 we need to change bond_cancel_all() Bugs 1 and 2 are fixed by moving all work initializations in bond_open which by Obs. 2 and Obs. 3 and the fact that we make sure that all works are cancelled in bond_close(), is guaranteed not to have any work enqueued. Also RTNL lock is now acquired in bonding_store_miimon/arp_interval so they can't race with bond_close and bond_open. The opposing work is cancelled only if the IFF_UP flag is set and it is cancelled unconditionally. The opposing work is already cancelled if the interface is down so no need to cancel it again. This way we don't need new synchronizations for the bonding workqueue. These bugs (and fixes) are tied together and belong in the same patch. Note: I have left 1 line intentionally over 80 characters (84) because I didn't like how it looks broken down. If you'd prefer it otherwise, then simply break it. v2: Make description text < 75 columns Signed-off-by: Nikolay Aleksandrov Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 88 ++++++++++++---------------------------- drivers/net/bonding/bond_sysfs.c | 34 +++++----------- 2 files changed, 36 insertions(+), 86 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 5f5b69f37d2e..1445c7ddb26c 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3459,6 +3459,28 @@ static int bond_xmit_hash_policy_l34(struct sk_buff *skb, int count) /*-------------------------- Device entry points ----------------------------*/ +static void bond_work_init_all(struct bonding *bond) +{ + INIT_DELAYED_WORK(&bond->mcast_work, + bond_resend_igmp_join_requests_delayed); + INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor); + INIT_DELAYED_WORK(&bond->mii_work, bond_mii_monitor); + if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) + INIT_DELAYED_WORK(&bond->arp_work, bond_activebackup_arp_mon); + else + INIT_DELAYED_WORK(&bond->arp_work, bond_loadbalance_arp_mon); + INIT_DELAYED_WORK(&bond->ad_work, bond_3ad_state_machine_handler); +} + +static void bond_work_cancel_all(struct bonding *bond) +{ + cancel_delayed_work_sync(&bond->mii_work); + cancel_delayed_work_sync(&bond->arp_work); + cancel_delayed_work_sync(&bond->alb_work); + cancel_delayed_work_sync(&bond->ad_work); + cancel_delayed_work_sync(&bond->mcast_work); +} + static int bond_open(struct net_device *bond_dev) { struct bonding *bond = netdev_priv(bond_dev); @@ -3481,41 +3503,27 @@ static int bond_open(struct net_device *bond_dev) } read_unlock(&bond->lock); - INIT_DELAYED_WORK(&bond->mcast_work, bond_resend_igmp_join_requests_delayed); + bond_work_init_all(bond); if (bond_is_lb(bond)) { /* bond_alb_initialize must be called before the timer * is started. */ - if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB))) { - /* something went wrong - fail the open operation */ + if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB))) return -ENOMEM; - } - - INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor); queue_delayed_work(bond->wq, &bond->alb_work, 0); } - if (bond->params.miimon) { /* link check interval, in milliseconds. */ - INIT_DELAYED_WORK(&bond->mii_work, bond_mii_monitor); + if (bond->params.miimon) /* link check interval, in milliseconds. */ queue_delayed_work(bond->wq, &bond->mii_work, 0); - } if (bond->params.arp_interval) { /* arp interval, in milliseconds. */ - if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) - INIT_DELAYED_WORK(&bond->arp_work, - bond_activebackup_arp_mon); - else - INIT_DELAYED_WORK(&bond->arp_work, - bond_loadbalance_arp_mon); - queue_delayed_work(bond->wq, &bond->arp_work, 0); if (bond->params.arp_validate) bond->recv_probe = bond_arp_rcv; } if (bond->params.mode == BOND_MODE_8023AD) { - INIT_DELAYED_WORK(&bond->ad_work, bond_3ad_state_machine_handler); queue_delayed_work(bond->wq, &bond->ad_work, 0); /* register to receive LACPDUs */ bond->recv_probe = bond_3ad_lacpdu_recv; @@ -3530,34 +3538,10 @@ static int bond_close(struct net_device *bond_dev) struct bonding *bond = netdev_priv(bond_dev); write_lock_bh(&bond->lock); - bond->send_peer_notif = 0; - write_unlock_bh(&bond->lock); - if (bond->params.miimon) { /* link check interval, in milliseconds. */ - cancel_delayed_work_sync(&bond->mii_work); - } - - if (bond->params.arp_interval) { /* arp interval, in milliseconds. */ - cancel_delayed_work_sync(&bond->arp_work); - } - - switch (bond->params.mode) { - case BOND_MODE_8023AD: - cancel_delayed_work_sync(&bond->ad_work); - break; - case BOND_MODE_TLB: - case BOND_MODE_ALB: - cancel_delayed_work_sync(&bond->alb_work); - break; - default: - break; - } - - if (delayed_work_pending(&bond->mcast_work)) - cancel_delayed_work_sync(&bond->mcast_work); - + bond_work_cancel_all(bond); if (bond_is_lb(bond)) { /* Must be called only after all * slaves have been released @@ -4436,26 +4420,6 @@ static void bond_setup(struct net_device *bond_dev) bond_dev->features |= bond_dev->hw_features; } -static void bond_work_cancel_all(struct bonding *bond) -{ - if (bond->params.miimon && delayed_work_pending(&bond->mii_work)) - cancel_delayed_work_sync(&bond->mii_work); - - if (bond->params.arp_interval && delayed_work_pending(&bond->arp_work)) - cancel_delayed_work_sync(&bond->arp_work); - - if (bond->params.mode == BOND_MODE_ALB && - delayed_work_pending(&bond->alb_work)) - cancel_delayed_work_sync(&bond->alb_work); - - if (bond->params.mode == BOND_MODE_8023AD && - delayed_work_pending(&bond->ad_work)) - cancel_delayed_work_sync(&bond->ad_work); - - if (delayed_work_pending(&bond->mcast_work)) - cancel_delayed_work_sync(&bond->mcast_work); -} - /* * Destroy a bonding device. * Must be under rtnl_lock when this function is called. diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index ef8d2a080d17..3327a072e224 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -513,6 +513,8 @@ static ssize_t bonding_store_arp_interval(struct device *d, int new_value, ret = count; struct bonding *bond = to_bond(d); + if (!rtnl_trylock()) + return restart_syscall(); if (sscanf(buf, "%d", &new_value) != 1) { pr_err("%s: no arp_interval value specified.\n", bond->dev->name); @@ -539,10 +541,6 @@ static ssize_t bonding_store_arp_interval(struct device *d, pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n", bond->dev->name, bond->dev->name); bond->params.miimon = 0; - if (delayed_work_pending(&bond->mii_work)) { - cancel_delayed_work(&bond->mii_work); - flush_workqueue(bond->wq); - } } if (!bond->params.arp_targets[0]) { pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n", @@ -554,19 +552,12 @@ static ssize_t bonding_store_arp_interval(struct device *d, * timer will get fired off when the open function * is called. */ - if (!delayed_work_pending(&bond->arp_work)) { - if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) - INIT_DELAYED_WORK(&bond->arp_work, - bond_activebackup_arp_mon); - else - INIT_DELAYED_WORK(&bond->arp_work, - bond_loadbalance_arp_mon); - - queue_delayed_work(bond->wq, &bond->arp_work, 0); - } + cancel_delayed_work_sync(&bond->mii_work); + queue_delayed_work(bond->wq, &bond->arp_work, 0); } out: + rtnl_unlock(); return ret; } static DEVICE_ATTR(arp_interval, S_IRUGO | S_IWUSR, @@ -962,6 +953,8 @@ static ssize_t bonding_store_miimon(struct device *d, int new_value, ret = count; struct bonding *bond = to_bond(d); + if (!rtnl_trylock()) + return restart_syscall(); if (sscanf(buf, "%d", &new_value) != 1) { pr_err("%s: no miimon value specified.\n", bond->dev->name); @@ -993,10 +986,6 @@ static ssize_t bonding_store_miimon(struct device *d, bond->params.arp_validate = BOND_ARP_VALIDATE_NONE; } - if (delayed_work_pending(&bond->arp_work)) { - cancel_delayed_work(&bond->arp_work); - flush_workqueue(bond->wq); - } } if (bond->dev->flags & IFF_UP) { @@ -1005,15 +994,12 @@ static ssize_t bonding_store_miimon(struct device *d, * timer will get fired off when the open function * is called. */ - if (!delayed_work_pending(&bond->mii_work)) { - INIT_DELAYED_WORK(&bond->mii_work, - bond_mii_monitor); - queue_delayed_work(bond->wq, - &bond->mii_work, 0); - } + cancel_delayed_work_sync(&bond->arp_work); + queue_delayed_work(bond->wq, &bond->mii_work, 0); } } out: + rtnl_unlock(); return ret; } static DEVICE_ATTR(miimon, S_IRUGO | S_IWUSR, -- cgit v1.2.3 From 90fb6250c509cabd425b7ae4524053dba2e27e2c Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Thu, 29 Nov 2012 01:34:06 +0000 Subject: bonding: make arp_ip_target parameter checks consistent with sysfs The module can be loaded with arp_ip_target="255.255.255.255" which makes it impossible to remove as the function in sysfs checks for that value, so we make the parameter checks consistent with sysfs. v2: Fix formatting v3: Make description text < 75 columns Signed-off-by: Nikolay Aleksandrov Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 1445c7ddb26c..a7d47350ea4b 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4670,12 +4670,13 @@ static int bond_check_params(struct bond_params *params) arp_ip_count++) { /* not complete check, but should be good enough to catch mistakes */ - if (!isdigit(arp_ip_target[arp_ip_count][0])) { + __be32 ip = in_aton(arp_ip_target[arp_ip_count]); + if (!isdigit(arp_ip_target[arp_ip_count][0]) || + ip == 0 || ip == htonl(INADDR_BROADCAST)) { pr_warning("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n", arp_ip_target[arp_ip_count]); arp_interval = 0; } else { - __be32 ip = in_aton(arp_ip_target[arp_ip_count]); arp_target[arp_ip_count] = ip; } } -- cgit v1.2.3 From e196c0e579902f42cf72414461fb034e5a1ffbf7 Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Thu, 29 Nov 2012 01:37:59 +0000 Subject: bonding: fix race condition in bonding_store_slaves_active Race between bonding_store_slaves_active() and slave manipulation functions. The bond_for_each_slave use in bonding_store_slaves_active() is not protected by any synchronization mechanism. NULL pointer dereference is easy to reach. Fixed by acquiring the bond->lock for the slave walk. v2: Make description text < 75 columns Signed-off-by: Nikolay Aleksandrov Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_sysfs.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 3327a072e224..1877ed7ca086 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -1568,6 +1568,7 @@ static ssize_t bonding_store_slaves_active(struct device *d, goto out; } + read_lock(&bond->lock); bond_for_each_slave(bond, slave, i) { if (!bond_is_active_slave(slave)) { if (new_value) @@ -1576,6 +1577,7 @@ static ssize_t bonding_store_slaves_active(struct device *d, slave->inactive = 1; } } + read_unlock(&bond->lock); out: return ret; } -- cgit v1.2.3 From 1e8b33328a5407b447ff80953655a47014a6dcb9 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 29 Nov 2012 10:49:50 -0800 Subject: blockdev: remove bd_block_size_semaphore again This reverts the block-device direct access code to the previous unlocked code, now that fs/buffer.c no longer needs external locking. With this, fs/block_dev.c is back to the original version, apart from a whitespace cleanup that I didn't want to revert. Signed-off-by: Linus Torvalds --- drivers/char/raw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/raw.c b/drivers/char/raw.c index 0bb207eaef2f..54a3a6d09819 100644 --- a/drivers/char/raw.c +++ b/drivers/char/raw.c @@ -285,7 +285,7 @@ static long raw_ctl_compat_ioctl(struct file *file, unsigned int cmd, static const struct file_operations raw_fops = { .read = do_sync_read, - .aio_read = blkdev_aio_read, + .aio_read = generic_file_aio_read, .write = do_sync_write, .aio_write = blkdev_aio_write, .fsync = blkdev_fsync, -- cgit v1.2.3 From a50915394f1fc02c2861d3b7ce7014788aa5066e Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 29 Nov 2012 13:54:27 -0800 Subject: revert "Revert "mm: remove __GFP_NO_KSWAPD"" It apepars that this patch was innocent, and we hope that "mm: avoid waking kswapd for THP allocations when compaction is deferred or contended" will fix the final kswapd-spinning cause. Cc: Zdenek Kabelac Cc: Seth Jennings Cc: Valdis Kletnieks Cc: Jiri Slaby Cc: Rik van Riel Cc: Robert Jennings Cc: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mtd/mtdcore.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index ec794a72975d..374c46dff7dd 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -1077,8 +1077,7 @@ EXPORT_SYMBOL_GPL(mtd_writev); * until the request succeeds or until the allocation size falls below * the system page size. This attempts to make sure it does not adversely * impact system performance, so when allocating more than one page, we - * ask the memory allocator to avoid re-trying, swapping, writing back - * or performing I/O. + * ask the memory allocator to avoid re-trying. * * Note, this function also makes sure that the allocated buffer is aligned to * the MTD device's min. I/O unit, i.e. the "mtd->writesize" value. @@ -1092,8 +1091,7 @@ EXPORT_SYMBOL_GPL(mtd_writev); */ void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size) { - gfp_t flags = __GFP_NOWARN | __GFP_WAIT | - __GFP_NORETRY | __GFP_NO_KSWAPD; + gfp_t flags = __GFP_NOWARN | __GFP_WAIT | __GFP_NORETRY; size_t min_alloc = max_t(size_t, mtd->writesize, PAGE_SIZE); void *kbuf; -- cgit v1.2.3 From 1430e17844e2cd15bc15f3c21b5349e762f6ba41 Mon Sep 17 00:00:00 2001 From: "Kim, Milo" Date: Thu, 29 Nov 2012 13:54:36 -0800 Subject: drivers/rtc/rtc-tps65910.c: fix invalid pointer access on _remove() The tps65910_rtc data is registered as the platform driver data in _probe(= ). Therefore the tps65910_rtc should be used on unregistering the rtc device. And device pointer should be retrieved from the platform_device structure. This patch fixes the below oops: Unable to handle kernel NULL pointer dereference at virtual address 00000008 Modules linked in: rtc_tps65910(-) CPU: 0 Not tainted (3.7.0-rc7-next-20121128-g6b1f974-dirty #7) PC is at tps65910_rtc_alarm_irq_enable+0x20/0x2c [rtc_tps65910] (tps65910_rtc_alarm_irq_enable+0x20/0x2c [rtc_tps65910]) (tps65910_rtc_remove+0x18/0x28 [rtc_tps65910]) (platform_drv_remove+0x18/0x1c) (__device_release_driver+0x70/0xcc) (driver_detach+0xb4/0xb8) (bus_remove_driver+0x7c/0xc0) (sys_delete_module+0x148/0x21c) Signed-off-by: Milo(Woogyom) Kim Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-tps65910.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-tps65910.c b/drivers/rtc/rtc-tps65910.c index 7a82337e4dee..073108dcf9e7 100644 --- a/drivers/rtc/rtc-tps65910.c +++ b/drivers/rtc/rtc-tps65910.c @@ -288,11 +288,11 @@ static int __devinit tps65910_rtc_probe(struct platform_device *pdev) static int __devexit tps65910_rtc_remove(struct platform_device *pdev) { /* leave rtc running, but disable irqs */ - struct rtc_device *rtc = platform_get_drvdata(pdev); + struct tps65910_rtc *tps_rtc = platform_get_drvdata(pdev); - tps65910_rtc_alarm_irq_enable(&rtc->dev, 0); + tps65910_rtc_alarm_irq_enable(&pdev->dev, 0); - rtc_device_unregister(rtc); + rtc_device_unregister(tps_rtc->rtc); return 0; } -- cgit v1.2.3 From 892a925e42adb8192a3c832ad29cbc780fc466f6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Sat, 1 Dec 2012 13:08:50 +0000 Subject: 8139cp: fix coherent mapping leak in error path. cp_open [...] rc = cp_alloc_rings(cp); if (rc) return rc; cp_alloc_rings [...] mem = dma_alloc_coherent(&cp->pdev->dev, CP_RING_BYTES, &cp->ring_dma, GFP_KERNEL); - cp_alloc_rings never frees the coherent mapping it allocates - neither do cp_open when cp_alloc_rings fails Signed-off-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139cp.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index b01f83a044c4..609125a249d9 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -1060,17 +1060,22 @@ static int cp_init_rings (struct cp_private *cp) static int cp_alloc_rings (struct cp_private *cp) { + struct device *d = &cp->pdev->dev; void *mem; + int rc; - mem = dma_alloc_coherent(&cp->pdev->dev, CP_RING_BYTES, - &cp->ring_dma, GFP_KERNEL); + mem = dma_alloc_coherent(d, CP_RING_BYTES, &cp->ring_dma, GFP_KERNEL); if (!mem) return -ENOMEM; cp->rx_ring = mem; cp->tx_ring = &cp->rx_ring[CP_RX_RING_SIZE]; - return cp_init_rings(cp); + rc = cp_init_rings(cp); + if (rc < 0) + dma_free_coherent(d, CP_RING_BYTES, cp->rx_ring, cp->ring_dma); + + return rc; } static void cp_clean_rings (struct cp_private *cp) -- cgit v1.2.3 From ed4b7021cb51fe5a0f260df03298709347a26967 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Mon, 3 Dec 2012 20:57:46 +0100 Subject: UBI: remove PEB from free tree in get_peb_for_wl() If UBI is built without fastmap, get_peb_for_wl() has to remove the PEB manially from the free tree. Otherwise the requested PEB lives in two trees. Reported-by: Zach Sadecki Signed-off-by: Richard Weinberger Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/wl.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index da7b44998b40..1f9f5f7a5d0f 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -679,7 +679,13 @@ static struct ubi_wl_entry *get_peb_for_wl(struct ubi_device *ubi) #else static struct ubi_wl_entry *get_peb_for_wl(struct ubi_device *ubi) { - return find_wl_entry(ubi, &ubi->free, WL_FREE_MAX_DIFF); + struct ubi_wl_entry *e; + + e = find_wl_entry(ubi, &ubi->free, WL_FREE_MAX_DIFF); + self_check_in_wl_tree(ubi, e, &ubi->free); + rb_erase(&e->u.rb, &ubi->free); + + return e; } int ubi_wl_get_peb(struct ubi_device *ubi) -- cgit v1.2.3 From 894aef215775b56b725e9dde856b7a8b091ddfcc Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Mon, 3 Dec 2012 20:57:47 +0100 Subject: UBI: dont call ubi_self_check_all_ff() in __wl_get_peb() As ubi_self_check_all_ff() might sleep we are not allowed to call it from atomic context. For now we call it only from ubi_wl_get_peb(). There are some code paths where it would also make sense, but these paths are currently atomic and only enabled when fastmap is used. Signed-off-by: Richard Weinberger Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/wl.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index 1f9f5f7a5d0f..2144f611196e 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -498,7 +498,7 @@ out: * @ubi: UBI device description object * * This function returns a physical eraseblock in case of success and a - * negative error code in case of failure. Might sleep. + * negative error code in case of failure. */ static int __wl_get_peb(struct ubi_device *ubi) { @@ -540,13 +540,6 @@ retry: * ubi_wl_get_peb() after removing e from the pool. */ prot_queue_add(ubi, e); #endif - err = ubi_self_check_all_ff(ubi, e->pnum, ubi->vid_hdr_aloffset, - ubi->peb_size - ubi->vid_hdr_aloffset); - if (err) { - ubi_err("new PEB %d does not contain all 0xFF bytes", e->pnum); - return err; - } - return e->pnum; } @@ -690,12 +683,19 @@ static struct ubi_wl_entry *get_peb_for_wl(struct ubi_device *ubi) int ubi_wl_get_peb(struct ubi_device *ubi) { - int peb; + int peb, err; spin_lock(&ubi->wl_lock); peb = __wl_get_peb(ubi); spin_unlock(&ubi->wl_lock); + err = ubi_self_check_all_ff(ubi, peb, ubi->vid_hdr_aloffset, + ubi->peb_size - ubi->vid_hdr_aloffset); + if (err) { + ubi_err("new PEB %d does not contain all 0xFF bytes", peb); + return err; + } + return peb; } #endif -- cgit v1.2.3 From c1d390d8e6128b050f0f66b1c33d390760deb3f4 Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Tue, 4 Dec 2012 19:33:54 +0800 Subject: megaraid: fix BUG_ON() from incorrect use of delayed work megaraid use INIT_WORK to declare a hotplug_work, but cast the hotplug_work from work_struct to delayed_work and schedule_delayed_work on it. This is very dangerous, as other part of delayed_work might be kernel memories allocated by others. With commit 8852aac ("workqueue: mod_delayed_work_on() shouldn't queue timer on 0 delay"), schedule_delayed_work() will check dwork->timer before queue_work even when @delay is 0, this causes megaraid code to hit the BUG_ON() in workqueue code. Change megaraid code to use delayed work. Signed-off-by: Xiaotian Feng Signed-off-by: Tejun Heo Cc: Neela Syam Kolli Cc: "James E.J. Bottomley" Cc: linux-scsi@vger.kernel.org --- drivers/scsi/megaraid/megaraid_sas.h | 2 +- drivers/scsi/megaraid/megaraid_sas_base.c | 14 ++++++-------- 2 files changed, 7 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index 16b7a72a70c4..3b2365c8eab2 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -1276,7 +1276,7 @@ struct megasas_evt_detail { } __attribute__ ((packed)); struct megasas_aen_event { - struct work_struct hotplug_work; + struct delayed_work hotplug_work; struct megasas_instance *instance; }; diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index d2c5366aff7f..e4f2baacf1e1 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -2060,9 +2060,9 @@ megasas_service_aen(struct megasas_instance *instance, struct megasas_cmd *cmd) } else { ev->instance = instance; instance->ev = ev; - INIT_WORK(&ev->hotplug_work, megasas_aen_polling); - schedule_delayed_work( - (struct delayed_work *)&ev->hotplug_work, 0); + INIT_DELAYED_WORK(&ev->hotplug_work, + megasas_aen_polling); + schedule_delayed_work(&ev->hotplug_work, 0); } } } @@ -4352,8 +4352,7 @@ megasas_suspend(struct pci_dev *pdev, pm_message_t state) /* cancel the delayed work if this work still in queue */ if (instance->ev != NULL) { struct megasas_aen_event *ev = instance->ev; - cancel_delayed_work_sync( - (struct delayed_work *)&ev->hotplug_work); + cancel_delayed_work_sync(&ev->hotplug_work); instance->ev = NULL; } @@ -4545,8 +4544,7 @@ static void __devexit megasas_detach_one(struct pci_dev *pdev) /* cancel the delayed work if this work still in queue*/ if (instance->ev != NULL) { struct megasas_aen_event *ev = instance->ev; - cancel_delayed_work_sync( - (struct delayed_work *)&ev->hotplug_work); + cancel_delayed_work_sync(&ev->hotplug_work); instance->ev = NULL; } @@ -5190,7 +5188,7 @@ static void megasas_aen_polling(struct work_struct *work) { struct megasas_aen_event *ev = - container_of(work, struct megasas_aen_event, hotplug_work); + container_of(work, struct megasas_aen_event, hotplug_work.work); struct megasas_instance *instance = ev->instance; union megasas_evt_class_locale class_locale; struct Scsi_Host *host; -- cgit v1.2.3 From fe007c02f9659f5c0ae6f3ceaf45076df92cc88e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Heiko=20St=C3=BCbner?= Date: Sun, 18 Nov 2012 19:50:05 +0100 Subject: mmc: sdhci-s3c: fix missing clock for gpio card-detect 2abeb5c5ded2 ("Add clk_(enable/disable) in runtime suspend/resume") added the capability to stop the clocks when the device is runtime suspended, but forgot to handle the case of the card-detect using an external gpio. Therefore in the case that runtime-pm is enabled, start the io-clock when a card is inserted and stop it again once it is removed. Signed-off-by: Heiko Stuebner Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-s3c.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index a54dd5d7a5f9..c9ec725884e5 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -373,18 +373,25 @@ static struct sdhci_ops sdhci_s3c_ops = { static void sdhci_s3c_notify_change(struct platform_device *dev, int state) { struct sdhci_host *host = platform_get_drvdata(dev); + struct sdhci_s3c *sc = sdhci_priv(host); unsigned long flags; if (host) { spin_lock_irqsave(&host->lock, flags); if (state) { dev_dbg(&dev->dev, "card inserted.\n"); +#ifdef CONFIG_PM_RUNTIME + clk_prepare_enable(sc->clk_io); +#endif host->flags &= ~SDHCI_DEVICE_DEAD; host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION; } else { dev_dbg(&dev->dev, "card removed.\n"); host->flags |= SDHCI_DEVICE_DEAD; host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION; +#ifdef CONFIG_PM_RUNTIME + clk_disable_unprepare(sc->clk_io); +#endif } tasklet_schedule(&host->card_tasklet); spin_unlock_irqrestore(&host->lock, flags); -- cgit v1.2.3 From 6984f3c31bb57cb7491dbec1be44b74bd00f4648 Mon Sep 17 00:00:00 2001 From: Chris Ball Date: Mon, 3 Dec 2012 09:17:19 -0500 Subject: Revert misapplied "mmc: sh-mmcif: avoid oops on spurious interrupts" This reverts commit 8464dd52d3198dd05, which was a misapplied debugging version of the patch, not the final patch itself. Signed-off-by: Chris Ball Cc: stable@vger.kernel.org --- drivers/mmc/host/sh_mmcif.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index d25bc97dc5c6..43cd0b54db07 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -1231,10 +1231,6 @@ static irqreturn_t sh_mmcif_intr(int irq, void *dev_id) host->sd_error = true; dev_dbg(&host->pd->dev, "int err state = %08x\n", state); } - if (host->state == STATE_IDLE) { - dev_info(&host->pd->dev, "Spurious IRQ status 0x%x", state); - return IRQ_HANDLED; - } if (state & ~(INT_CMD12RBE | INT_CMD12CRE)) { if (!host->dma_active) return IRQ_WAKE_THREAD; -- cgit v1.2.3 From 91ab252ac5a5c3461dd6910797611e9172626aed Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 22 Aug 2012 06:49:47 +0000 Subject: mmc: sh-mmcif: avoid oops on spurious interrupts (second try) On some systems, e.g., kzm9g, MMCIF interfaces can produce spurious interrupts without any active request. To prevent the Oops, that results in such cases, don't dereference the mmc request pointer until we make sure, that we are indeed processing such a request. Reported-by: Tetsuyuki Kobayashi Signed-off-by: Guennadi Liakhovetski Tested-by: Tetsuyuki Kobayashi Cc: stable@vger.kernel.org Signed-off-by: Chris Ball --- drivers/mmc/host/sh_mmcif.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index 43cd0b54db07..7eaee3eeb6b2 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -1104,7 +1104,6 @@ static irqreturn_t sh_mmcif_irqt(int irq, void *dev_id) { struct sh_mmcif_host *host = dev_id; struct mmc_request *mrq = host->mrq; - struct mmc_data *data = mrq->data; cancel_delayed_work_sync(&host->timeout_work); @@ -1152,13 +1151,14 @@ static irqreturn_t sh_mmcif_irqt(int irq, void *dev_id) case MMCIF_WAIT_FOR_READ_END: case MMCIF_WAIT_FOR_WRITE_END: if (host->sd_error) - data->error = sh_mmcif_error_manage(host); + mrq->data->error = sh_mmcif_error_manage(host); break; default: BUG(); } if (host->wait_for != MMCIF_WAIT_FOR_STOP) { + struct mmc_data *data = mrq->data; if (!mrq->cmd->error && data && !data->error) data->bytes_xfered = data->blocks * data->blksz; -- cgit v1.2.3 From caf491916b1c1e939a2c7575efb7a77f11fc9bdf Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 10 Dec 2012 10:51:16 -0800 Subject: Revert "revert "Revert "mm: remove __GFP_NO_KSWAPD""" and associated damage This reverts commits a50915394f1fc02c2861d3b7ce7014788aa5066e and d7c3b937bdf45f0b844400b7bf6fd3ed50bac604. This is a revert of a revert of a revert. In addition, it reverts the even older i915 change to stop using the __GFP_NO_KSWAPD flag due to the original commits in linux-next. It turns out that the original patch really was bogus, and that the original revert was the correct thing to do after all. We thought we had fixed the problem, and then reverted the revert, but the problem really is fundamental: waking up kswapd simply isn't the right thing to do, and direct reclaim sometimes simply _is_ the right thing to do. When certain allocations fail, we simply should try some direct reclaim, and if that fails, fail the allocation. That's the right thing to do for THP allocations, which can easily fail, and the GPU allocations want to do that too. So starting kswapd is sometimes simply wrong, and removing the flag that said "don't start kswapd" was a mistake. Let's hope we never revisit this mistake again - and certainly not this many times ;) Acked-by: Mel Gorman Acked-by: Johannes Weiner Cc: Rik van Riel Cc: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpu/drm/i915/i915_gem.c | 6 +++--- drivers/mtd/mtdcore.c | 6 ++++-- 2 files changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 107f09befe92..9b285da4449b 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1796,7 +1796,7 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj) */ mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping; gfp = mapping_gfp_mask(mapping); - gfp |= __GFP_NORETRY | __GFP_NOWARN; + gfp |= __GFP_NORETRY | __GFP_NOWARN | __GFP_NO_KSWAPD; gfp &= ~(__GFP_IO | __GFP_WAIT); for_each_sg(st->sgl, sg, page_count, i) { page = shmem_read_mapping_page_gfp(mapping, i, gfp); @@ -1809,7 +1809,7 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj) * our own buffer, now let the real VM do its job and * go down in flames if truly OOM. */ - gfp &= ~(__GFP_NORETRY | __GFP_NOWARN); + gfp &= ~(__GFP_NORETRY | __GFP_NOWARN | __GFP_NO_KSWAPD); gfp |= __GFP_IO | __GFP_WAIT; i915_gem_shrink_all(dev_priv); @@ -1817,7 +1817,7 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj) if (IS_ERR(page)) goto err_pages; - gfp |= __GFP_NORETRY | __GFP_NOWARN; + gfp |= __GFP_NORETRY | __GFP_NOWARN | __GFP_NO_KSWAPD; gfp &= ~(__GFP_IO | __GFP_WAIT); } diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 374c46dff7dd..ec794a72975d 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -1077,7 +1077,8 @@ EXPORT_SYMBOL_GPL(mtd_writev); * until the request succeeds or until the allocation size falls below * the system page size. This attempts to make sure it does not adversely * impact system performance, so when allocating more than one page, we - * ask the memory allocator to avoid re-trying. + * ask the memory allocator to avoid re-trying, swapping, writing back + * or performing I/O. * * Note, this function also makes sure that the allocated buffer is aligned to * the MTD device's min. I/O unit, i.e. the "mtd->writesize" value. @@ -1091,7 +1092,8 @@ EXPORT_SYMBOL_GPL(mtd_writev); */ void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size) { - gfp_t flags = __GFP_NOWARN | __GFP_WAIT | __GFP_NORETRY; + gfp_t flags = __GFP_NOWARN | __GFP_WAIT | + __GFP_NORETRY | __GFP_NO_KSWAPD; size_t min_alloc = max_t(size_t, mtd->writesize, PAGE_SIZE); void *kbuf; -- cgit v1.2.3 From 55220bb3e5f917dd5fee1153c612f9a83599f639 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 10 Dec 2012 12:25:32 -0800 Subject: Input: matrix-keymap - provide proper module license The matrix-keymap module is currently lacking a proper module license, add one so we don't have this module tainting the entire kernel. This issue has been present since commit 1932811f426f ("Input: matrix-keymap - uninline and prepare for device tree support") Signed-off-by: Florian Fainelli CC: stable@vger.kernel.org # v3.5+ Signed-off-by: Dmitry Torokhov Signed-off-by: Linus Torvalds --- drivers/input/matrix-keymap.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/input/matrix-keymap.c b/drivers/input/matrix-keymap.c index 443ad64b7f2a..d88d9be1d1b7 100644 --- a/drivers/input/matrix-keymap.c +++ b/drivers/input/matrix-keymap.c @@ -23,6 +23,7 @@ #include #include #include +#include #include static bool matrix_keypad_map_key(struct input_dev *input_dev, @@ -161,3 +162,5 @@ int matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data, return 0; } EXPORT_SYMBOL(matrix_keypad_build_keymap); + +MODULE_LICENSE("GPL"); -- cgit v1.2.3