From 269e4a4122685d0739f0e8e53b440111bf8a03f9 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Wed, 4 Sep 2013 13:37:43 +0300 Subject: spi/pxa2xx: check status register as well to determine if the device is off The current interrupt handler calls pm_runtime_suspended() to check if the device is suspended or not. However, runtime PM status of the device is only set to suspended once all PM runtime suspend hooks have executed. In case of Intel Lynxpoint we have the device bound to the ACPI power domain and its runtime suspend hook will put the device to D3hot (or D3cold if possible). This means that the device is powered off before its state is set to runtime suspended. While in this state the device might get an interrupt that is meant for another device (as the interrupt line is shared), and because the device is powered off accessing its registers will return 0xffffffff that the driver misinterprets as an invalid state. When this happens user will see messages like below on the console: pxa2xx-spi INT33C0:00: bad message state in interrupt handler Fix this by checking the status register for ~0 and returning IRQ_NONE in that case. Signed-off-by: Mika Westerberg Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 2eb06ee0b326..c1a50674c1e3 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -546,8 +546,17 @@ static irqreturn_t ssp_int(int irq, void *dev_id) if (pm_runtime_suspended(&drv_data->pdev->dev)) return IRQ_NONE; - sccr1_reg = read_SSCR1(reg); + /* + * If the device is not yet in RPM suspended state and we get an + * interrupt that is meant for another device, check if status bits + * are all set to one. That means that the device is already + * powered off. + */ status = read_SSSR(reg); + if (status == ~0) + return IRQ_NONE; + + sccr1_reg = read_SSCR1(reg); /* Ignore possible writes if we don't need to write */ if (!(sccr1_reg & SSCR1_TIE)) -- cgit v1.2.3 From 9b4003a687abcf2fe25ba9073dd07345e4529183 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 10 Sep 2013 10:19:29 +0800 Subject: spi: clps711x: Don't call kfree() after spi_master_put/spi_unregister_master Calling kfree() to clean up the memory obtained from spi_alloc_master() is wrong as this is done in spi_master_release() when spi_master->dev's refcount reaches zero. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/spi/spi-clps711x.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-clps711x.c b/drivers/spi/spi-clps711x.c index 5655acf55bfe..b597a92565dc 100644 --- a/drivers/spi/spi-clps711x.c +++ b/drivers/spi/spi-clps711x.c @@ -247,7 +247,6 @@ err_out: gpio_free(hw->chipselect[i]); spi_master_put(master); - kfree(master); return ret; } @@ -263,7 +262,6 @@ static int spi_clps711x_remove(struct platform_device *pdev) gpio_free(hw->chipselect[i]); spi_unregister_master(master); - kfree(master); return 0; } -- cgit v1.2.3 From eadf69cf5e1cdd042fb7b7beeffa538a935373cd Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 11 Sep 2013 19:15:39 +0800 Subject: spi: mpc512x: fix error return code in mpc512x_psc_spi_do_probe() Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-mpc512x-psc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-mpc512x-psc.c b/drivers/spi/spi-mpc512x-psc.c index dbc5e999a1f5..6adf4e35816d 100644 --- a/drivers/spi/spi-mpc512x-psc.c +++ b/drivers/spi/spi-mpc512x-psc.c @@ -522,8 +522,10 @@ static int mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr, psc_num = master->bus_num; snprintf(clk_name, sizeof(clk_name), "psc%d_mclk", psc_num); clk = devm_clk_get(dev, clk_name); - if (IS_ERR(clk)) + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); goto free_irq; + } ret = clk_prepare_enable(clk); if (ret) goto free_irq; -- cgit v1.2.3 From 272bfbd54f29b9361b09dbd6b25ccbd1a30163f1 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 11 Sep 2013 19:15:08 +0800 Subject: spi: fix return value check in dspi_probe() In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-dspi.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 6cd07d13ecab..4e44575bd87a 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -476,15 +476,9 @@ static int dspi_probe(struct platform_device *pdev) master->bus_num = bus_num; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "can't get platform resource\n"); - ret = -EINVAL; - goto out_master_put; - } - dspi->base = devm_ioremap_resource(&pdev->dev, res); - if (!dspi->base) { - ret = -EINVAL; + if (IS_ERR(dspi->base)) { + ret = PTR_ERR(dspi->base); goto out_master_put; } -- cgit v1.2.3 From 47d06e532e95b71c0db3839ebdef3fe8812fca2c Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 10 Sep 2013 10:52:35 -0400 Subject: random: run random_int_secret_init() run after all late_initcalls The some platforms (e.g., ARM) initializes their clocks as late_initcalls for some unknown reason. So make sure random_int_secret_init() is run after all of the late_initcalls are run. Cc: stable@vger.kernel.org Signed-off-by: "Theodore Ts'o" --- drivers/char/random.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/random.c b/drivers/char/random.c index 0d91fe52f3f5..92e6c67e1ae6 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1462,12 +1462,11 @@ struct ctl_table random_table[] = { static u32 random_int_secret[MD5_MESSAGE_BYTES / 4] ____cacheline_aligned; -static int __init random_int_secret_init(void) +int random_int_secret_init(void) { get_random_bytes(random_int_secret, sizeof(random_int_secret)); return 0; } -late_initcall(random_int_secret_init); /* * Get a random word for internal kernel use only. Similar to urandom but -- cgit v1.2.3 From 19872d20c890073c5207d9e02bb8f14d451a11eb Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Mon, 9 Sep 2013 18:33:54 +0200 Subject: HID: uhid: allocate static minor udev has this nice feature of creating "dead" /dev/ device-nodes if it finds a devnode: modalias. Once the node is accessed, the kernel automatically loads the module that provides the node. However, this requires udev to know the major:minor code to use for the node. This feature was introduced by: commit 578454ff7eab61d13a26b568f99a89a2c9edc881 Author: Kay Sievers Date: Thu May 20 18:07:20 2010 +0200 driver core: add devname module aliases to allow module on-demand auto-loading However, uhid uses dynamic minor numbers so this doesn't actually work. We need to load uhid to know which minor it's going to use. Hence, allocate a static minor (just like uinput does) and we're good to go. Reported-by: Tom Gundersen Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- drivers/hid/uhid.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/uhid.c b/drivers/hid/uhid.c index 5bf2fb785844..93b00d76374c 100644 --- a/drivers/hid/uhid.c +++ b/drivers/hid/uhid.c @@ -615,7 +615,7 @@ static const struct file_operations uhid_fops = { static struct miscdevice uhid_misc = { .fops = &uhid_fops, - .minor = MISC_DYNAMIC_MINOR, + .minor = UHID_MINOR, .name = UHID_NAME, }; @@ -634,4 +634,5 @@ module_exit(uhid_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("David Herrmann "); MODULE_DESCRIPTION("User-space I/O driver support for HID subsystem"); +MODULE_ALIAS_MISCDEV(UHID_MINOR); MODULE_ALIAS("devname:" UHID_NAME); -- cgit v1.2.3 From 0158026ccced1ae312233a6a46dc0b6edce3fb6c Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 27 Sep 2013 16:21:30 +0800 Subject: spi/clps711x: drop clk_put for devm_clk_get in spi_clps711x_probe() devm_clk_get() is used so there is no reason to explicitly call clk_put() in probe or remove functions. Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-clps711x.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-clps711x.c b/drivers/spi/spi-clps711x.c index b597a92565dc..6416798828e7 100644 --- a/drivers/spi/spi-clps711x.c +++ b/drivers/spi/spi-clps711x.c @@ -226,7 +226,6 @@ static int spi_clps711x_probe(struct platform_device *pdev) dev_name(&pdev->dev), hw); if (ret) { dev_err(&pdev->dev, "Can't request IRQ\n"); - clk_put(hw->spi_clk); goto clk_out; } -- cgit v1.2.3 From 5cb1327172281cadb7ee8c5fa294d7ac8e09b8db Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 16 Sep 2013 17:59:20 -0700 Subject: mtd: nand: fix memory leak in ONFI extended parameter page This fixes a memory leak in the ONFI support code for detecting the required ECC levels from this commit: commit 6dcbe0cdd83fb5f77be4f44c9e06c535281c375a Author: Huang Shijie Date: Wed May 22 10:28:27 2013 +0800 mtd: get the ECC info from the Extended Parameter Page In the success case, we never freed the 'ep' buffer. Also, this fixes an oversight in the same commit where we (harmlessly) freed the NULL pointer. Signed-off-by: Brian Norris Acked-by: Huang Shijie Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 7ed4841327f2..d340b2f198c6 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2869,10 +2869,8 @@ static int nand_flash_detect_ext_param_page(struct mtd_info *mtd, len = le16_to_cpu(p->ext_param_page_length) * 16; ep = kmalloc(len, GFP_KERNEL); - if (!ep) { - ret = -ENOMEM; - goto ext_out; - } + if (!ep) + return -ENOMEM; /* Send our own NAND_CMD_PARAM. */ chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1); @@ -2920,7 +2918,7 @@ static int nand_flash_detect_ext_param_page(struct mtd_info *mtd, } pr_info("ONFI extended param page detected.\n"); - return 0; + ret = 0; ext_out: kfree(ep); -- cgit v1.2.3 From 2b468ef0e7959b703626b64c4d264ef822c9267a Mon Sep 17 00:00:00 2001 From: Elie De Brauwer Date: Tue, 17 Sep 2013 19:48:22 +0200 Subject: mtd: m25p80: Fix 4 byte addressing mode for Micron devices. According to the datasheet for Micron n25q256a (N25Q256A13ESF40F) 4-byte addressing mode should be entered as follows: To enter or exit the 4-byte address mode, the WRITE ENABLE command must be executed to set the write enable latch bit to 1. (Note: The WRITE ENABLE command must NOT be executed on the N25Q256A83ESF40x and N25Q256A83E1240x devices.) S# must be driven LOW. The effect of the command is immediate; after the command has been executed, the write enable latch bit is cleared to 0. Micron's portable way to perform this for all types of Micron flash is to first issue a write enable, then switch the addressing mode followed by a write disable to avoid leaving the flash in a write- able state. Signed-off-by: Elie De Brauwer [Brian: reworked a bit] Signed-off-by: Brian Norris Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 26b14f9fcac6..6bc9618af094 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -168,12 +168,25 @@ static inline int write_disable(struct m25p *flash) */ static inline int set_4byte(struct m25p *flash, u32 jedec_id, int enable) { + int status; + bool need_wren = false; + switch (JEDEC_MFR(jedec_id)) { - case CFI_MFR_MACRONIX: case CFI_MFR_ST: /* Micron, actually */ + /* Some Micron need WREN command; all will accept it */ + need_wren = true; + case CFI_MFR_MACRONIX: case 0xEF /* winbond */: + if (need_wren) + write_enable(flash); + flash->command[0] = enable ? OPCODE_EN4B : OPCODE_EX4B; - return spi_write(flash->spi, flash->command, 1); + status = spi_write(flash->spi, flash->command, 1); + + if (need_wren) + write_disable(flash); + + return status; default: /* Spansion style */ flash->command[0] = OPCODE_BRWR; -- cgit v1.2.3 From 3e2bd64d243ff0f3dc08c49ff218fed42ee9d981 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 27 Sep 2013 11:52:35 +0100 Subject: spi/s3c64xx: Ensure runtime PM is enabled prior to registration Otherwise we may try to start transfers immediately and then fail to runtime resume the device causing us not to have clocks enabled. Signed-off-by: Mark Brown Reviewed-by: Sylwester Nawrocki Conflicts: drivers/spi/spi-s3c64xx.c --- drivers/spi/spi-s3c64xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 512b8893893b..a80376dc3a10 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -1428,6 +1428,8 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) S3C64XX_SPI_INT_TX_OVERRUN_EN | S3C64XX_SPI_INT_TX_UNDERRUN_EN, sdd->regs + S3C64XX_SPI_INT_EN); + pm_runtime_enable(&pdev->dev); + if (spi_register_master(master)) { dev_err(&pdev->dev, "cannot register SPI master\n"); ret = -EBUSY; @@ -1440,8 +1442,6 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) mem_res, sdd->rx_dma.dmach, sdd->tx_dma.dmach); - pm_runtime_enable(&pdev->dev); - return 0; err3: -- cgit v1.2.3 From 550dbf47819239c7ceb27bbd9879e2feb0633aab Mon Sep 17 00:00:00 2001 From: Stefan Achatz Date: Sat, 28 Sep 2013 05:57:46 +0200 Subject: HID: roccat: Fix "cannot create duplicate filename" problems Fixing some wrong macro stringification/concatenation. Acked-by: Greg Kroah-Hartman Signed-off-by: Stefan Achatz Signed-off-by: Jiri Kosina --- drivers/hid/hid-roccat-kone.c | 2 +- drivers/hid/hid-roccat-koneplus.c | 4 ++-- drivers/hid/hid-roccat-kovaplus.c | 4 ++-- drivers/hid/hid-roccat-pyra.c | 4 ++-- 4 files changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-roccat-kone.c b/drivers/hid/hid-roccat-kone.c index 602c188e9d86..6101816a7ddd 100644 --- a/drivers/hid/hid-roccat-kone.c +++ b/drivers/hid/hid-roccat-kone.c @@ -382,7 +382,7 @@ static ssize_t kone_sysfs_write_profilex(struct file *fp, } #define PROFILE_ATTR(number) \ static struct bin_attribute bin_attr_profile##number = { \ - .attr = { .name = "profile##number", .mode = 0660 }, \ + .attr = { .name = "profile" #number, .mode = 0660 }, \ .size = sizeof(struct kone_profile), \ .read = kone_sysfs_read_profilex, \ .write = kone_sysfs_write_profilex, \ diff --git a/drivers/hid/hid-roccat-koneplus.c b/drivers/hid/hid-roccat-koneplus.c index 5ddf605b6b89..5e99fcdc71b9 100644 --- a/drivers/hid/hid-roccat-koneplus.c +++ b/drivers/hid/hid-roccat-koneplus.c @@ -229,13 +229,13 @@ static ssize_t koneplus_sysfs_read_profilex_buttons(struct file *fp, #define PROFILE_ATTR(number) \ static struct bin_attribute bin_attr_profile##number##_settings = { \ - .attr = { .name = "profile##number##_settings", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_settings", .mode = 0440 }, \ .size = KONEPLUS_SIZE_PROFILE_SETTINGS, \ .read = koneplus_sysfs_read_profilex_settings, \ .private = &profile_numbers[number-1], \ }; \ static struct bin_attribute bin_attr_profile##number##_buttons = { \ - .attr = { .name = "profile##number##_buttons", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_buttons", .mode = 0440 }, \ .size = KONEPLUS_SIZE_PROFILE_BUTTONS, \ .read = koneplus_sysfs_read_profilex_buttons, \ .private = &profile_numbers[number-1], \ diff --git a/drivers/hid/hid-roccat-kovaplus.c b/drivers/hid/hid-roccat-kovaplus.c index 515bc03136c0..0c8e1ef0b67d 100644 --- a/drivers/hid/hid-roccat-kovaplus.c +++ b/drivers/hid/hid-roccat-kovaplus.c @@ -257,13 +257,13 @@ static ssize_t kovaplus_sysfs_read_profilex_buttons(struct file *fp, #define PROFILE_ATTR(number) \ static struct bin_attribute bin_attr_profile##number##_settings = { \ - .attr = { .name = "profile##number##_settings", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_settings", .mode = 0440 }, \ .size = KOVAPLUS_SIZE_PROFILE_SETTINGS, \ .read = kovaplus_sysfs_read_profilex_settings, \ .private = &profile_numbers[number-1], \ }; \ static struct bin_attribute bin_attr_profile##number##_buttons = { \ - .attr = { .name = "profile##number##_buttons", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_buttons", .mode = 0440 }, \ .size = KOVAPLUS_SIZE_PROFILE_BUTTONS, \ .read = kovaplus_sysfs_read_profilex_buttons, \ .private = &profile_numbers[number-1], \ diff --git a/drivers/hid/hid-roccat-pyra.c b/drivers/hid/hid-roccat-pyra.c index 5a6dbbeee790..1a07e07d99a0 100644 --- a/drivers/hid/hid-roccat-pyra.c +++ b/drivers/hid/hid-roccat-pyra.c @@ -225,13 +225,13 @@ static ssize_t pyra_sysfs_read_profilex_buttons(struct file *fp, #define PROFILE_ATTR(number) \ static struct bin_attribute bin_attr_profile##number##_settings = { \ - .attr = { .name = "profile##number##_settings", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_settings", .mode = 0440 }, \ .size = PYRA_SIZE_PROFILE_SETTINGS, \ .read = pyra_sysfs_read_profilex_settings, \ .private = &profile_numbers[number-1], \ }; \ static struct bin_attribute bin_attr_profile##number##_buttons = { \ - .attr = { .name = "profile##number##_buttons", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_buttons", .mode = 0440 }, \ .size = PYRA_SIZE_PROFILE_BUTTONS, \ .read = pyra_sysfs_read_profilex_buttons, \ .private = &profile_numbers[number-1], \ -- cgit v1.2.3 From 8f0ba630af45235a6866054704531d49e524e49a Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 11 Sep 2013 06:49:20 +0800 Subject: s390/3270: fix return value check in tty3270_resize_work() In case of error, the function tty3270_alloc_screen() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/char/tty3270.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c index a0f47c83fd62..3f4ca4e09a4c 100644 --- a/drivers/s390/char/tty3270.c +++ b/drivers/s390/char/tty3270.c @@ -810,7 +810,7 @@ static void tty3270_resize_work(struct work_struct *work) struct winsize ws; screen = tty3270_alloc_screen(tp->n_rows, tp->n_cols); - if (!screen) + if (IS_ERR(screen)) return; /* Switch to new output size */ spin_lock_bh(&tp->view.lock); -- cgit v1.2.3 From 22bfda6688c9b91393a07887182ec35acc9d06bb Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Tue, 17 Sep 2013 13:28:50 +0200 Subject: s390/sclp: properly detect line mode console To detect a line mode console we need a message event type for the receive mask and a command event type for the send mask. Checking for a MSG event in the sclp send mask was wrong and might result in line mode consoles not being detected. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky --- drivers/s390/char/sclp_cmd.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c index 8cd34bf644b3..77df9cb00688 100644 --- a/drivers/s390/char/sclp_cmd.c +++ b/drivers/s390/char/sclp_cmd.c @@ -145,9 +145,11 @@ bool __init sclp_has_linemode(void) if (sccb->header.response_code != 0x20) return 0; - if (sccb->sclp_send_mask & (EVTYP_MSG_MASK | EVTYP_PMSGCMD_MASK)) - return 1; - return 0; + if (!(sccb->sclp_send_mask & (EVTYP_OPCMD_MASK | EVTYP_PMSGCMD_MASK))) + return 0; + if (!(sccb->sclp_receive_mask & (EVTYP_MSG_MASK | EVTYP_PMSGCMD_MASK))) + return 0; + return 1; } bool __init sclp_has_vt220(void) -- cgit v1.2.3 From 671952a2a290a90017c64e75b7dd0343b0d005b4 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 1 Oct 2013 18:11:26 +0300 Subject: drm/i915: fix rps.vlv_work initialization During driver loading we are initializing rps.vlv_work in valleyview_enable_rps() via the rps.delayed_resume_work delayed work. This is too late since we are using vlv_work already via i915_driver_load()->intel_uncore_sanitize()-> intel_disable_gt_powersave(). This at least leads to the following kernel warning: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Fix this by initialzing vlv_work before we call intel_uncore_sanitize(). The regression was introduced in commit 7dcd2677ea912573d9ed4bcd629b0023b2d11505 Author: Konstantin Khlebnikov Date: Wed Jul 17 10:22:58 2013 +0400 drm/i915: fix long-standing SNB regression in power consumption after resume though there was no good reason to initialize the static vlv_work from another delayed work to begin with (especially since this will happen multiple times). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69397 Tested-by: shui yangwei Signed-off-by: Imre Deak Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_pm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index dd176b7296c1..73a8efc65615 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3864,8 +3864,6 @@ static void valleyview_enable_rps(struct drm_device *dev) dev_priv->rps.rpe_delay), dev_priv->rps.rpe_delay); - INIT_DELAYED_WORK(&dev_priv->rps.vlv_work, vlv_rps_timer_work); - valleyview_set_rps(dev_priv->dev, dev_priv->rps.rpe_delay); gen6_enable_rps_interrupts(dev); @@ -5681,5 +5679,7 @@ void intel_pm_init(struct drm_device *dev) INIT_DELAYED_WORK(&dev_priv->rps.delayed_resume_work, intel_gen6_powersave_work); + + INIT_DELAYED_WORK(&dev_priv->rps.vlv_work, vlv_rps_timer_work); } -- cgit v1.2.3 From 0f5a24c6602063e014ee48892ebf56093241106e Mon Sep 17 00:00:00 2001 From: Manoj Chourasia Date: Tue, 1 Oct 2013 15:39:00 +0530 Subject: HID: hidraw: close underlying device at removal of last reader Even though device exist bit is set the underlying HW device should be closed when the last reader of the device is closed i.e. open count drops to zero. Signed-off-by: Manoj Chourasia Reported-by: mika.westerberg@linux.intel.com Tested-by: mika.westerberg@linux.intel.com Signed-off-by: Jiri Kosina --- drivers/hid/hidraw.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index 8918dd12bb69..6a6dd5cd7833 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -308,18 +308,25 @@ static int hidraw_fasync(int fd, struct file *file, int on) static void drop_ref(struct hidraw *hidraw, int exists_bit) { if (exists_bit) { - hid_hw_close(hidraw->hid); hidraw->exist = 0; - if (hidraw->open) + if (hidraw->open) { + hid_hw_close(hidraw->hid); wake_up_interruptible(&hidraw->wait); + } } else { --hidraw->open; } - - if (!hidraw->open && !hidraw->exist) { - device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor)); - hidraw_table[hidraw->minor] = NULL; - kfree(hidraw); + if (!hidraw->open) { + if (!hidraw->exist) { + device_destroy(hidraw_class, + MKDEV(hidraw_major, hidraw->minor)); + hidraw_table[hidraw->minor] = NULL; + kfree(hidraw); + } else { + /* close device for last reader */ + hid_hw_power(hidraw->hid, PM_HINT_NORMAL); + hid_hw_close(hidraw->hid); + } } } -- cgit v1.2.3 From 7da7cbbbeb60e0939fecdf9723b388136c175e5c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Anders=20F=2E=20U=2E=20Ki=C3=A6r?= Date: Tue, 1 Oct 2013 19:22:05 +0200 Subject: HID: add Holtek USB ID 04d9:a081 SHARKOON DarkGlider MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Added id, bindings and comments for Holtek USB ID 04d9:a081 SHARKOON DarkGlider Gaming mouse to use the same corrections of the report descriptor as Holtek 04d9:a04a. As the mouse exceed HID_MAX_USAGES at the same offsets in the reported descriptor. Tested on the hardware. Signed-off-by: Anders F. U. Kiær Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 1 + drivers/hid/hid-core.c | 1 + drivers/hid/hid-holtek-mouse.c | 4 ++++ drivers/hid/hid-ids.h | 1 + 4 files changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 71b70e3a7a71..c91d547191dd 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -241,6 +241,7 @@ config HID_HOLTEK - Sharkoon Drakonia / Perixx MX-2000 gaming mice - Tracer Sniper TRM-503 / NOVA Gaming Slider X200 / Zalman ZM-GM1 + - SHARKOON DarkGlider Gaming mouse config HOLTEK_FF bool "Holtek On Line Grip force feedback support" diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index b8470b1a10fe..5a8c01112a23 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1715,6 +1715,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A) }, { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067) }, + { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A081) }, { HID_USB_DEVICE(USB_VENDOR_ID_HUION, USB_DEVICE_ID_HUION_580) }, { HID_USB_DEVICE(USB_VENDOR_ID_JESS2, USB_DEVICE_ID_JESS2_COLOR_RUMBLE_PAD) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ION, USB_DEVICE_ID_ICADE) }, diff --git a/drivers/hid/hid-holtek-mouse.c b/drivers/hid/hid-holtek-mouse.c index 7e6db3cf46f9..e696566cde46 100644 --- a/drivers/hid/hid-holtek-mouse.c +++ b/drivers/hid/hid-holtek-mouse.c @@ -27,6 +27,7 @@ * - USB ID 04d9:a067, sold as Sharkoon Drakonia and Perixx MX-2000 * - USB ID 04d9:a04a, sold as Tracer Sniper TRM-503, NOVA Gaming Slider X200 * and Zalman ZM-GM1 + * - USB ID 04d9:a081, sold as SHARKOON DarkGlider Gaming mouse */ static __u8 *holtek_mouse_report_fixup(struct hid_device *hdev, __u8 *rdesc, @@ -46,6 +47,7 @@ static __u8 *holtek_mouse_report_fixup(struct hid_device *hdev, __u8 *rdesc, } break; case USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A: + case USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A081: if (*rsize >= 113 && rdesc[106] == 0xff && rdesc[107] == 0x7f && rdesc[111] == 0xff && rdesc[112] == 0x7f) { hid_info(hdev, "Fixing up report descriptor\n"); @@ -63,6 +65,8 @@ static const struct hid_device_id holtek_mouse_devices[] = { USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067) }, { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A) }, + { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, + USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A081) }, { } }; MODULE_DEVICE_TABLE(hid, holtek_mouse_devices); diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index e60e8d530697..9cbc7ab07dfa 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -450,6 +450,7 @@ #define USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD 0xa055 #define USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067 0xa067 #define USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A 0xa04a +#define USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A081 0xa081 #define USB_VENDOR_ID_IMATION 0x0718 #define USB_DEVICE_ID_DISC_STAKKA 0xd000 -- cgit v1.2.3 From f3fc4884ebe6ae649d3723be14b219230d3b7fd2 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Wed, 2 Oct 2013 15:53:16 -0700 Subject: drm/i915/hsw: Disable L3 caching of atomic memory operations. Otherwise using any atomic memory operation will lock up the GPU due to a Haswell hardware bug. v2: Use the _MASKED_BIT_ENABLE macro. Drop drm parameter definition. Signed-off-by: Francisco Jerez Reviewed-by: Ben Widawsky Cc: Daniel Vetter Cc: [danvet: Fix checkpatch fail.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_reg.h | 6 ++++++ drivers/gpu/drm/i915/intel_pm.c | 5 +++++ 2 files changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index c159e1a6810f..38f96f65d87a 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3881,6 +3881,9 @@ #define GEN7_SQ_CHICKEN_MBCUNIT_CONFIG 0x9030 #define GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB (1<<11) +#define HSW_SCRATCH1 0xb038 +#define HSW_SCRATCH1_L3_DATA_ATOMICS_DISABLE (1<<27) + #define HSW_FUSE_STRAP 0x42014 #define HSW_CDCLK_LIMIT (1 << 24) @@ -4728,6 +4731,9 @@ #define GEN7_ROW_CHICKEN2_GT2 0xf4f4 #define DOP_CLOCK_GATING_DISABLE (1<<0) +#define HSW_ROW_CHICKEN3 0xe49c +#define HSW_ROW_CHICKEN3_L3_GLOBAL_ATOMICS_DISABLE (1 << 6) + #define G4X_AUD_VID_DID (dev_priv->info->display_mmio_offset + 0x62020) #define INTEL_AUDIO_DEVCL 0x808629FB #define INTEL_AUDIO_DEVBLC 0x80862801 diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 73a8efc65615..f4c5e95b2d6f 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -4953,6 +4953,11 @@ static void haswell_init_clock_gating(struct drm_device *dev) I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER, GEN7_WA_L3_CHICKEN_MODE); + /* L3 caching of data atomics doesn't work -- disable it. */ + I915_WRITE(HSW_SCRATCH1, HSW_SCRATCH1_L3_DATA_ATOMICS_DISABLE); + I915_WRITE(HSW_ROW_CHICKEN3, + _MASKED_BIT_ENABLE(HSW_ROW_CHICKEN3_L3_GLOBAL_ATOMICS_DISABLE)); + /* This is required by WaCatErrorRejectionIssue:hsw */ I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG, I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) | -- cgit v1.2.3 From 268d76430d1b68c340687357ffd18b4b12d02269 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 3 Oct 2013 02:15:50 -0700 Subject: spi/hspi: fixup Runtime PM enable timing 3e00a09d2fbd64f0ad98e7c8c29dbf9e038fc746 (spi/hspi: Convert to core runtime PM) enabled master->auto_runtime_pm. Then, pm_runtime_enable() is required *before* spi_register_master() calling. This patch fixed it up. Kernel will hang up with "spi_master spi0: Failed to power device: -13" message without this patch. Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- drivers/spi/spi-sh-hspi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-sh-hspi.c b/drivers/spi/spi-sh-hspi.c index 0b68cb592fa4..e488a90a98b8 100644 --- a/drivers/spi/spi-sh-hspi.c +++ b/drivers/spi/spi-sh-hspi.c @@ -296,6 +296,8 @@ static int hspi_probe(struct platform_device *pdev) goto error1; } + pm_runtime_enable(&pdev->dev); + master->num_chipselect = 1; master->bus_num = pdev->id; master->setup = hspi_setup; @@ -309,8 +311,6 @@ static int hspi_probe(struct platform_device *pdev) goto error1; } - pm_runtime_enable(&pdev->dev); - return 0; error1: -- cgit v1.2.3 From 0cc4b69960f3d1231023ad5de6cacbc1fbee2a88 Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Thu, 3 Oct 2013 13:31:26 -0300 Subject: drm/i915: Mask LPSP to get PSR working even with Power Well in use by audio. Power Well in use forces constantly PSR to exit. On recent Kernel I noticed that PSR Performance Counter was always 0 indicating that PSR was never really achieved. By masking LPSP, PSR can work normally and save power on Haswell. Two bugs had been raised with PSR flag enabled: - "Screen flickers when booted by enabling PSR in the kernel (i915.enable_psr=1) , the system is booting to a gray screen." - "When booting the DUT with PSR feature enabled in the kernel (i915.enable_psr=1) , the system is booting to a gray screen." Both bugs has been fixed by this patch. v2: proper comment for -fixes Tested-by: Selvaraj, Elavarasan Signed-off-by: Rodrigo Vivi Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 79c14e298ba6..2c555f91bfae 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1467,7 +1467,7 @@ static void intel_edp_psr_setup(struct intel_dp *intel_dp) /* Avoid continuous PSR exit by masking memup and hpd */ I915_WRITE(EDP_PSR_DEBUG_CTL, EDP_PSR_DEBUG_MASK_MEMUP | - EDP_PSR_DEBUG_MASK_HPD); + EDP_PSR_DEBUG_MASK_HPD | EDP_PSR_DEBUG_MASK_LPSP); intel_dp->psr_setup_done = true; } -- cgit v1.2.3 From c9976dcf55c8aaa7037427b239f15e5acfc01a3a Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 29 Sep 2013 19:15:07 +0100 Subject: drm/i915: Only apply DPMS to the encoder if enabled The current test for an attached enabled encoder fails if we have multiple connectors aliased to the same encoder - both connectors believe they own the enabled encoder and so we attempt to both enable and disable DPMS on the encoder, leading to hilarity and an OOPs: [ 354.803064] WARNING: CPU: 0 PID: 482 at /usr/src/linux/dist/3.11.2/drivers/gpu/drm/i915/intel_display.c:3869 intel_modeset_check_state+0x764/0x770 [i915]() [ 354.803064] wrong connector dpms state [ 354.803084] Modules linked in: nfsd auth_rpcgss oid_registry exportfs nfs lockd sunrpc xt_nat iptable_nat nf_nat_ipv4 nf_nat xt_limit xt_LOG xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 ipt_REJECT ipv6 xt_recent xt_conntrack nf_conntrack iptable_filter ip_tables x_tables snd_hda_codec_realtek snd_hda_codec_hdmi x86_pkg_temp_thermal snd_hda_intel coretemp kvm_intel snd_hda_codec i915 kvm snd_hwdep snd_pcm_oss snd_mixer_oss crc32_pclmul snd_pcm crc32c_intel e1000e intel_agp igb ghash_clmulni_intel intel_gtt aesni_intel cfbfillrect aes_x86_64 cfbimgblt lrw cfbcopyarea drm_kms_helper ptp video thermal processor gf128mul snd_page_alloc drm snd_timer glue_helper 8250_pci snd pps_core ablk_helper agpgart cryptd sg soundcore fan i2c_algo_bit sr_mod thermal_sys 8250 i2c_i801 serial_core hwmon cdrom i2c_core evdev button [ 354.803086] CPU: 0 PID: 482 Comm: kworker/0:1 Not tainted 3.11.2 #1 [ 354.803087] Hardware name: Supermicro X10SAE/X10SAE, BIOS 1.00 05/03/2013 [ 354.803091] Workqueue: events console_callback [ 354.803092] 0000000000000009 ffff88023611db48 ffffffff814048ac ffff88023611db90 [ 354.803093] ffff88023611db80 ffffffff8103d4e3 ffff880230d82800 ffff880230f9b800 [ 354.803094] ffff880230f99000 ffff880230f99448 ffff8802351c0e00 ffff88023611dbe0 [ 354.803094] Call Trace: [ 354.803098] [] dump_stack+0x54/0x8d [ 354.803101] [] warn_slowpath_common+0x73/0x90 [ 354.803103] [] warn_slowpath_fmt+0x47/0x50 [ 354.803109] [] ? intel_ddi_connector_get_hw_state+0x5e/0x110 [i915] [ 354.803114] [] intel_modeset_check_state+0x764/0x770 [i915] [ 354.803117] [] intel_connector_dpms+0x3b/0x60 [i915] [ 354.803120] [] drm_fb_helper_dpms.isra.11+0x120/0x160 [drm_kms_helper] [ 354.803122] [] drm_fb_helper_blank+0x3e/0x80 [drm_kms_helper] [ 354.803123] [] fb_blank+0x52/0xc0 [ 354.803125] [] fbcon_blank+0x21b/0x2d0 [ 354.803127] [] ? update_rq_clock.part.74+0x13/0x30 [ 354.803129] [] ? lock_timer_base.isra.30+0x26/0x50 [ 354.803130] [] ? internal_add_timer+0x12/0x40 [ 354.803131] [] ? mod_timer+0xf8/0x1c0 [ 354.803133] [] do_unblank_screen+0xa1/0x1c0 [ 354.803134] [] poke_blanked_console+0xc7/0xd0 [ 354.803136] [] console_callback+0x13f/0x160 [ 354.803137] [] process_one_work+0x148/0x3d0 [ 354.803138] [] worker_thread+0x119/0x3a0 [ 354.803140] [] ? manage_workers.isra.30+0x2a0/0x2a0 [ 354.803141] [] kthread+0xbb/0xc0 [ 354.803142] [] ? kthread_create_on_node+0x120/0x120 [ 354.803144] [] ret_from_fork+0x7c/0xb0 [ 354.803145] [] ? kthread_create_on_node+0x120/0x120 This regression goes back to the big modeset rework and the conversion to the new dpms helpers which started with: commit 5ab432ef4997ce32c9406721b37ef6e97e57dae1 Author: Daniel Vetter Date: Sat Jun 30 08:59:56 2012 +0200 drm/i915/hdmi: convert to encoder->disable/enable Fixes: igt/kms_flip/dpms-off-confusion Reported-and-tested-by: Wakko Warner Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68030 Link: http://lkml.kernel.org/r/20130928185023.GA21672@animx.eu.org Signed-off-by: Chris Wilson Cc: stable@vger.kernel.org [danvet: Add regression citation, mention the igt testcase this fixes and slap a cc: stable on the patch.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index e5822e79f912..c89abd33124f 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3941,8 +3941,6 @@ static void intel_connector_check_state(struct intel_connector *connector) * consider. */ void intel_connector_dpms(struct drm_connector *connector, int mode) { - struct intel_encoder *encoder = intel_attached_encoder(connector); - /* All the simple cases only support two dpms states. */ if (mode != DRM_MODE_DPMS_ON) mode = DRM_MODE_DPMS_OFF; @@ -3953,10 +3951,8 @@ void intel_connector_dpms(struct drm_connector *connector, int mode) connector->dpms = mode; /* Only need to change hw state when actually enabled */ - if (encoder->base.crtc) - intel_encoder_dpms(encoder, mode); - else - WARN_ON(encoder->connectors_active != false); + if (connector->encoder) + intel_encoder_dpms(to_intel_encoder(connector->encoder), mode); intel_modeset_check_state(connector->dev); } -- cgit v1.2.3 From 0dbc6078c06bc002bfacf95f33960b1901c663f5 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 3 Oct 2013 11:59:14 +0200 Subject: x86, build, pci: Fix PCI_MSI build on !SMP Commit ebd97be635 ('PCI: remove ARCH_SUPPORTS_MSI kconfig option') removed the ARCH_SUPPORTS_MSI option which architectures could select to indicate that they support MSI. Now, all architectures are supposed to build fine when MSI support is enabled: instead of having the architecture tell *when* MSI support can be used, it's up to the architecture code to ensure that MSI support can be enabled. On x86, commit ebd97be635 removed the following line: select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC) Which meant that MSI support was only available when the local APIC and I/O APIC were enabled. While this is always true on SMP or x86-64, it is not necessarily the case on i386 !SMP. The below patch makes sure that the local APIC and I/O APIC support is always enabled when MSI support is enabled. To do so, it: * Ensures the X86_UP_APIC option is not visible when PCI_MSI is enabled. This is the option that allows, on UP machines, to enable or not the APIC support. It is already not visible on SMP systems, or x86-64 systems, for example. We're simply also making it invisible on i386 MSI systems. * Ensures that the X86_LOCAL_APIC and X86_IO_APIC options are 'y' when PCI_MSI is enabled. Notice that this change requires a change in drivers/iommu/Kconfig to avoid a recursive Kconfig dependencey. The AMD_IOMMU option selects PCI_MSI, but was depending on X86_IO_APIC. This dependency is no longer needed: as soon as PCI_MSI is selected, the presence of X86_IO_APIC is guaranteed. Moreover, the AMD_IOMMU already depended on X86_64, which already guaranteed that X86_IO_APIC was enabled, so this dependency was anyway redundant. Signed-off-by: Thomas Petazzoni Link: http://lkml.kernel.org/r/1380794354-9079-1-git-send-email-thomas.petazzoni@free-electrons.com Reported-by: Konrad Rzeszutek Wilk Acked-by: Bjorn Helgaas Signed-off-by: H. Peter Anvin --- drivers/iommu/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig index fe302e33f72e..c880ebaf1553 100644 --- a/drivers/iommu/Kconfig +++ b/drivers/iommu/Kconfig @@ -52,7 +52,7 @@ config AMD_IOMMU select PCI_PRI select PCI_PASID select IOMMU_API - depends on X86_64 && PCI && ACPI && X86_IO_APIC + depends on X86_64 && PCI && ACPI ---help--- With this option you can enable support for AMD IOMMU hardware in your system. An IOMMU is a hardware component which provides -- cgit v1.2.3 From 2962aecef2878e2192ac9676700469678507c24d Mon Sep 17 00:00:00 2001 From: Hans-Frieder Vogt Date: Sun, 6 Oct 2013 21:13:35 +0200 Subject: w1 - fix fops in w1_bus_notify Introduce a check to make sure that fops are only called if they have been defined by the slave module. Without this check modules like w1_smem cause a NULL pointer dereference bug. Signed-off by: Hans-Frieder Vogt Acked-by: Evgeniy Polyakov Cc: stable # 3.11+ Signed-off-by: Greg Kroah-Hartman --- drivers/w1/w1.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c index c7c64f18773d..0781217d2396 100644 --- a/drivers/w1/w1.c +++ b/drivers/w1/w1.c @@ -613,6 +613,9 @@ static int w1_bus_notify(struct notifier_block *nb, unsigned long action, sl = dev_to_w1_slave(dev); fops = sl->family->fops; + if (!fops) + return 0; + switch (action) { case BUS_NOTIFY_ADD_DEVICE: /* if the family driver needs to initialize something... */ -- cgit v1.2.3 From bc04d76d6942068f75c10790072280b847ec6f1f Mon Sep 17 00:00:00 2001 From: Hans-Frieder Vogt Date: Sun, 6 Oct 2013 21:13:40 +0200 Subject: w1 - call request_module with w1 master mutex unlocked request_module for w1 slave modules needs to be called with the w1 master mutex unlocked. Because w1_attach_slave_device gets always(?) called with mutex locked, we need to temporarily unlock the w1 master mutex for the loading of the w1 slave module. Signed-off by: Hans-Frieder Vogt Acked-by: Evgeniy Polyakov Cc: stable # 3.11+ Signed-off-by: Greg Kroah-Hartman --- drivers/w1/w1.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c index 0781217d2396..fa932c2f7d97 100644 --- a/drivers/w1/w1.c +++ b/drivers/w1/w1.c @@ -716,7 +716,10 @@ static int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn) atomic_set(&sl->refcnt, 0); init_completion(&sl->released); + /* slave modules need to be loaded in a context with unlocked mutex */ + mutex_unlock(&dev->mutex); request_module("w1-family-0x%0x", rn->family); + mutex_lock(&dev->mutex); spin_lock(&w1_flock); f = w1_family_registered(rn->family); -- cgit v1.2.3 From de8cc234a517b61c9a8450a34408dbae53aa171f Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 10 Sep 2013 17:06:26 +0530 Subject: spi: atmel: Fix incorrect error path 'irq' was not released when clk_prepare_enable failed. Fix it. Signed-off-by: Sachin Kamat Acked-by: Nicolas Ferre Signed-off-by: Mark Brown --- drivers/spi/spi-atmel.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index fd7cc566095a..d4ac60b4a56e 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -1583,7 +1583,7 @@ static int atmel_spi_probe(struct platform_device *pdev) /* Initialize the hardware */ ret = clk_prepare_enable(clk); if (ret) - goto out_unmap_regs; + goto out_free_irq; spi_writel(as, CR, SPI_BIT(SWRST)); spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ if (as->caps.has_wdrbt) { @@ -1614,6 +1614,7 @@ out_free_dma: spi_writel(as, CR, SPI_BIT(SWRST)); spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ clk_disable_unprepare(clk); +out_free_irq: free_irq(irq, master); out_unmap_regs: iounmap(as->regs); -- cgit v1.2.3 From f50f9aabf32db7414551ffdfdccc71be5f3d6e7d Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Wed, 2 Oct 2013 13:47:28 +0200 Subject: HID: wiimote: fix FF deadlock The input core has an internal spinlock that is acquired during event injection via input_event() and friends but also held during FF callbacks. That means, there is no way to share a lock between event-injection and FF handling. Unfortunately, this is what is required for wiimote state tracking and what we do with state.lock and input->lock. This deadlock can be triggered when using continuous data reporting and FF on a wiimote device at the same time. I takes me at least 30m of stress-testing to trigger it but users reported considerably shorter times (http://bpaste.net/show/132504/) when using some gaming-console emulators. The real problem is that we have two copies of internal state, one in the wiimote objects and the other in the input device. As the input-lock is not supposed to be accessed from outside of input-core, we have no other chance than offloading FF handling into a worker. This actually works pretty nice and also allows to implictly merge fast rumble changes into a single request. Due to the 3-layered workers (rumble+queue+l2cap) this might reduce FF responsiveness. Initial tests were fine so lets fix the race first and if it turns out to be too slow we can always handle FF out-of-band and skip the queue-worker. Cc: # 3.11+ Reported-by: Thomas Schneider Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- drivers/hid/hid-wiimote-modules.c | 40 ++++++++++++++++++++++++++++----------- drivers/hid/hid-wiimote.h | 4 +++- 2 files changed, 32 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-wiimote-modules.c b/drivers/hid/hid-wiimote-modules.c index 2e7d644dba18..71adf9e60b13 100644 --- a/drivers/hid/hid-wiimote-modules.c +++ b/drivers/hid/hid-wiimote-modules.c @@ -119,12 +119,22 @@ static const struct wiimod_ops wiimod_keys = { * the rumble motor, this flag shouldn't be set. */ +/* used by wiimod_rumble and wiipro_rumble */ +static void wiimod_rumble_worker(struct work_struct *work) +{ + struct wiimote_data *wdata = container_of(work, struct wiimote_data, + rumble_worker); + + spin_lock_irq(&wdata->state.lock); + wiiproto_req_rumble(wdata, wdata->state.cache_rumble); + spin_unlock_irq(&wdata->state.lock); +} + static int wiimod_rumble_play(struct input_dev *dev, void *data, struct ff_effect *eff) { struct wiimote_data *wdata = input_get_drvdata(dev); __u8 value; - unsigned long flags; /* * The wiimote supports only a single rumble motor so if any magnitude @@ -137,9 +147,10 @@ static int wiimod_rumble_play(struct input_dev *dev, void *data, else value = 0; - spin_lock_irqsave(&wdata->state.lock, flags); - wiiproto_req_rumble(wdata, value); - spin_unlock_irqrestore(&wdata->state.lock, flags); + /* Locking state.lock here might deadlock with input_event() calls. + * schedule_work acts as barrier. Merging multiple changes is fine. */ + wdata->state.cache_rumble = value; + schedule_work(&wdata->rumble_worker); return 0; } @@ -147,6 +158,8 @@ static int wiimod_rumble_play(struct input_dev *dev, void *data, static int wiimod_rumble_probe(const struct wiimod_ops *ops, struct wiimote_data *wdata) { + INIT_WORK(&wdata->rumble_worker, wiimod_rumble_worker); + set_bit(FF_RUMBLE, wdata->input->ffbit); if (input_ff_create_memless(wdata->input, NULL, wiimod_rumble_play)) return -ENOMEM; @@ -159,6 +172,8 @@ static void wiimod_rumble_remove(const struct wiimod_ops *ops, { unsigned long flags; + cancel_work_sync(&wdata->rumble_worker); + spin_lock_irqsave(&wdata->state.lock, flags); wiiproto_req_rumble(wdata, 0); spin_unlock_irqrestore(&wdata->state.lock, flags); @@ -1731,7 +1746,6 @@ static int wiimod_pro_play(struct input_dev *dev, void *data, { struct wiimote_data *wdata = input_get_drvdata(dev); __u8 value; - unsigned long flags; /* * The wiimote supports only a single rumble motor so if any magnitude @@ -1744,9 +1758,10 @@ static int wiimod_pro_play(struct input_dev *dev, void *data, else value = 0; - spin_lock_irqsave(&wdata->state.lock, flags); - wiiproto_req_rumble(wdata, value); - spin_unlock_irqrestore(&wdata->state.lock, flags); + /* Locking state.lock here might deadlock with input_event() calls. + * schedule_work acts as barrier. Merging multiple changes is fine. */ + wdata->state.cache_rumble = value; + schedule_work(&wdata->rumble_worker); return 0; } @@ -1756,6 +1771,8 @@ static int wiimod_pro_probe(const struct wiimod_ops *ops, { int ret, i; + INIT_WORK(&wdata->rumble_worker, wiimod_rumble_worker); + wdata->extension.input = input_allocate_device(); if (!wdata->extension.input) return -ENOMEM; @@ -1817,12 +1834,13 @@ static void wiimod_pro_remove(const struct wiimod_ops *ops, if (!wdata->extension.input) return; + input_unregister_device(wdata->extension.input); + wdata->extension.input = NULL; + cancel_work_sync(&wdata->rumble_worker); + spin_lock_irqsave(&wdata->state.lock, flags); wiiproto_req_rumble(wdata, 0); spin_unlock_irqrestore(&wdata->state.lock, flags); - - input_unregister_device(wdata->extension.input); - wdata->extension.input = NULL; } static const struct wiimod_ops wiimod_pro = { diff --git a/drivers/hid/hid-wiimote.h b/drivers/hid/hid-wiimote.h index f1474f372c0b..75db0c400037 100644 --- a/drivers/hid/hid-wiimote.h +++ b/drivers/hid/hid-wiimote.h @@ -133,13 +133,15 @@ struct wiimote_state { __u8 *cmd_read_buf; __u8 cmd_read_size; - /* calibration data */ + /* calibration/cache data */ __u16 calib_bboard[4][3]; + __u8 cache_rumble; }; struct wiimote_data { struct hid_device *hdev; struct input_dev *input; + struct work_struct rumble_worker; struct led_classdev *leds[4]; struct input_dev *accel; struct input_dev *ir; -- cgit v1.2.3 From b4e788df8d8132d25a76c22df340ab2e4bae630f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 7 Oct 2013 19:06:59 -0700 Subject: Revert "serial: i.MX: evaluate linux,stdout-path property" This reverts commit f7d2c0bbdb7b784cc035cacb7d36b379ba1c3bef, as it causes build errors when the driver is built as a module. Reported-by: Guenter Roeck Cc: Sascha Hauer Cc: Fabio Estevam Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index a0ebbc9ce5cd..042aa077b5b3 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1912,9 +1912,6 @@ static int serial_imx_probe_dt(struct imx_port *sport, sport->devdata = of_id->data; - if (of_device_is_stdout_path(np)) - add_preferred_console(imx_reg.cons->name, sport->port.line, 0); - return 0; } #else -- cgit v1.2.3 From b46b28d339164c8c74020eace97163e2e478ef34 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 8 Oct 2013 16:23:36 +1000 Subject: drm/nouveau/mc: disable msi support by default, it's busted in tons of places Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/mc/base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/core/subdev/mc/base.c b/drivers/gpu/drm/nouveau/core/subdev/mc/base.c index 37712a6df923..e290cfa4acee 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/mc/base.c +++ b/drivers/gpu/drm/nouveau/core/subdev/mc/base.c @@ -113,7 +113,7 @@ nouveau_mc_create_(struct nouveau_object *parent, struct nouveau_object *engine, pmc->use_msi = false; break; default: - pmc->use_msi = nouveau_boolopt(device->cfgopt, "NvMSI", true); + pmc->use_msi = nouveau_boolopt(device->cfgopt, "NvMSI", false); if (pmc->use_msi) { pmc->use_msi = pci_enable_msi(device->pdev) == 0; if (pmc->use_msi) { -- cgit v1.2.3 From b9aa8510dd68143cc9d66c520002b638983e254b Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Tue, 8 Oct 2013 16:31:59 -0400 Subject: drm/gma500: fix things after get/put page helpers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 8b9ba7a3 'drm/gma500: use gem get/put page helpers' was missing a line, which resulted in garbled screen. Signed-off-by: Rob Clark Tested-by: Guillaume CLÉMENT Signed-off-by: Dave Airlie --- drivers/gpu/drm/gma500/gtt.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/gma500/gtt.c b/drivers/gpu/drm/gma500/gtt.c index 92babac362ec..2db731f00930 100644 --- a/drivers/gpu/drm/gma500/gtt.c +++ b/drivers/gpu/drm/gma500/gtt.c @@ -204,6 +204,7 @@ static int psb_gtt_attach_pages(struct gtt_range *gt) if (IS_ERR(pages)) return PTR_ERR(pages); + gt->npage = gt->gem.size / PAGE_SIZE; gt->pages = pages; return 0; -- cgit v1.2.3 From 25f2bd7f5add608c1d1405938f39c96927b275ca Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Wed, 2 Oct 2013 19:15:03 +0200 Subject: hwmon: (applesmc) Always read until end of data The crash reported and investigated in commit 5f4513 turned out to be caused by a change to the read interface on newer (2012) SMCs. Tests by Chris show that simply reading the data valid line is enough for the problem to go away. Additional tests show that the newer SMCs no longer wait for the number of requested bytes, but start sending data right away. Apparently the number of bytes to read is no longer specified as before, but instead found out by reading until end of data. Failure to read until end of data confuses the state machine, which eventually causes the crash. As a remedy, assuming bit0 is the read valid line, make sure there is nothing more to read before leaving the read function. Tested to resolve the original problem, and runtested on MBA3,1, MBP4,1, MBP8,2, MBP10,1, MBP10,2. The patch seems to have no effect on machines before 2012. Tested-by: Chris Murphy Cc: stable@vger.kernel.org Signed-off-by: Henrik Rydberg Signed-off-by: Guenter Roeck --- drivers/hwmon/applesmc.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index 98814d12a604..3288f13d2d87 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -230,6 +230,7 @@ static int send_argument(const char *key) static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len) { + u8 status, data = 0; int i; if (send_command(cmd) || send_argument(key)) { @@ -237,6 +238,7 @@ static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len) return -EIO; } + /* This has no effect on newer (2012) SMCs */ if (send_byte(len, APPLESMC_DATA_PORT)) { pr_warn("%.4s: read len fail\n", key); return -EIO; @@ -250,6 +252,17 @@ static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len) buffer[i] = inb(APPLESMC_DATA_PORT); } + /* Read the data port until bit0 is cleared */ + for (i = 0; i < 16; i++) { + udelay(APPLESMC_MIN_WAIT); + status = inb(APPLESMC_CMD_PORT); + if (!(status & 0x01)) + break; + data = inb(APPLESMC_DATA_PORT); + } + if (i) + pr_warn("flushed %d bytes, last value is: %d\n", i, data); + return 0; } -- cgit v1.2.3 From ecc7e6f3bb8ad56764667aeabb860c24a6fa37f9 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 10 Oct 2013 07:05:41 +1000 Subject: Revert "drm/fb-helper: don't sleep for screen unblank when an oops is in progress" This reverts commit 928c2f0c006bf7f381f58af2b2786d2a858ae311. This patch double applied, two checks for the price of one. Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_fb_helper.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index f6f6cc7fc133..3d13ca6e257f 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -407,14 +407,6 @@ static void drm_fb_helper_dpms(struct fb_info *info, int dpms_mode) struct drm_connector *connector; int i, j; - /* - * fbdev->blank can be called from irq context in case of a panic. - * Since we already have our own special panic handler which will - * restore the fbdev console mode completely, just bail out early. - */ - if (oops_in_progress) - return; - /* * fbdev->blank can be called from irq context in case of a panic. * Since we already have our own special panic handler which will -- cgit v1.2.3 From aaed41ec5b8d734f79d7b87723190256ac6a0926 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 27 Sep 2013 18:44:39 -0400 Subject: drm/edid: catch kmalloc failure in drm_edid_to_speaker_allocation Return -ENOMEM if the allocation fails. Signed-off-by: Alex Deucher Reviewed-by: Jani Nikula --- drivers/gpu/drm/drm_edid.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 1688ff500513..830f7501cb4d 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -2925,6 +2925,8 @@ int drm_edid_to_speaker_allocation(struct edid *edid, u8 **sadb) /* Speaker Allocation Data Block */ if (dbl == 3) { *sadb = kmalloc(dbl, GFP_KERNEL); + if (!*sadb) + return -ENOMEM; memcpy(*sadb, &db[1], dbl); count = dbl; break; -- cgit v1.2.3 From 062c2e4363451d49ef840232fe65e8bff0dde2a5 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 27 Sep 2013 18:09:54 -0400 Subject: drm/radeon: use 64-bit math to calculate CTS values for audio (v2) Avoid losing precision. See bug: https://bugs.freedesktop.org/show_bug.cgi?id=69675 v2: fix math as per Anssi's comments. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r600_hdmi.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index b0fa6002af3e..49043a5ac65c 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -75,8 +75,15 @@ static const struct radeon_hdmi_acr r600_hdmi_predefined_acr[] = { */ static void r600_hdmi_calc_cts(uint32_t clock, int *CTS, int N, int freq) { - if (*CTS == 0) - *CTS = clock * N / (128 * freq) * 1000; + u64 n; + u32 d; + + if (*CTS == 0) { + n = (u64)clock * (u64)N * 1000ULL; + d = 128 * freq; + do_div(n, d); + *CTS = n; + } DRM_DEBUG("Using ACR timing N=%d CTS=%d for frequency %d\n", N, *CTS, freq); } -- cgit v1.2.3 From e7d12c2f98ae1e68c7298e5028048d150fa553a1 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 27 Sep 2013 18:19:42 -0400 Subject: drm/radeon: fix N/CTS clock matching for audio The drm code that calculates the 1001 clocks rounds up rather than truncating. This allows the table to match properly on those modes. See bug: https://bugs.freedesktop.org/show_bug.cgi?id=69675 Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r600_hdmi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index 49043a5ac65c..567703fdfbf1 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -57,15 +57,15 @@ enum r600_hdmi_iec_status_bits { static const struct radeon_hdmi_acr r600_hdmi_predefined_acr[] = { /* 32kHz 44.1kHz 48kHz */ /* Clock N CTS N CTS N CTS */ - { 25174, 4576, 28125, 7007, 31250, 6864, 28125 }, /* 25,20/1.001 MHz */ + { 25175, 4576, 28125, 7007, 31250, 6864, 28125 }, /* 25,20/1.001 MHz */ { 25200, 4096, 25200, 6272, 28000, 6144, 25200 }, /* 25.20 MHz */ { 27000, 4096, 27000, 6272, 30000, 6144, 27000 }, /* 27.00 MHz */ { 27027, 4096, 27027, 6272, 30030, 6144, 27027 }, /* 27.00*1.001 MHz */ { 54000, 4096, 54000, 6272, 60000, 6144, 54000 }, /* 54.00 MHz */ { 54054, 4096, 54054, 6272, 60060, 6144, 54054 }, /* 54.00*1.001 MHz */ - { 74175, 11648, 210937, 17836, 234375, 11648, 140625 }, /* 74.25/1.001 MHz */ + { 74176, 11648, 210937, 17836, 234375, 11648, 140625 }, /* 74.25/1.001 MHz */ { 74250, 4096, 74250, 6272, 82500, 6144, 74250 }, /* 74.25 MHz */ - { 148351, 11648, 421875, 8918, 234375, 5824, 140625 }, /* 148.50/1.001 MHz */ + { 148352, 11648, 421875, 8918, 234375, 5824, 140625 }, /* 148.50/1.001 MHz */ { 148500, 4096, 148500, 6272, 165000, 6144, 148500 }, /* 148.50 MHz */ { 0, 4096, 0, 6272, 0, 6144, 0 } /* Other */ }; -- cgit v1.2.3 From ee0fec312a1c4e26f255955da942562cd8908a4b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 27 Sep 2013 18:22:15 -0400 Subject: drm/radeon: use hw generated CTS/N values for audio Use the hw generated values rather than calculating them in the driver. There may be some older r6xx asics where this doesn't work correctly. This remains to be seen. See bug: https://bugs.freedesktop.org/show_bug.cgi?id=69675 Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/evergreen_hdmi.c | 3 +-- drivers/gpu/drm/radeon/r600_hdmi.c | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c index f71ce390aebe..f815c20640bd 100644 --- a/drivers/gpu/drm/radeon/evergreen_hdmi.c +++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c @@ -288,8 +288,7 @@ void evergreen_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode /* fglrx clears sth in AFMT_AUDIO_PACKET_CONTROL2 here */ WREG32(HDMI_ACR_PACKET_CONTROL + offset, - HDMI_ACR_AUTO_SEND | /* allow hw to sent ACR packets when required */ - HDMI_ACR_SOURCE); /* select SW CTS value */ + HDMI_ACR_AUTO_SEND); /* allow hw to sent ACR packets when required */ evergreen_hdmi_update_ACR(encoder, mode->clock); diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index 567703fdfbf1..e2ae1c237fb4 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -451,8 +451,7 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod } WREG32(HDMI0_ACR_PACKET_CONTROL + offset, - HDMI0_ACR_AUTO_SEND | /* allow hw to sent ACR packets when required */ - HDMI0_ACR_SOURCE); /* select SW CTS value */ + HDMI0_ACR_AUTO_SEND); /* allow hw to sent ACR packets when required */ WREG32(HDMI0_VBI_PACKET_CONTROL + offset, HDMI0_NULL_SEND | /* send null packets when required */ -- cgit v1.2.3 From dca5086a90c9ec64f4e0de801a659508202b0640 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 30 Sep 2013 19:11:24 -0400 Subject: drm/radeon/dpm: disable multiple UVD states Always use the regular UVD state for now. This fixes a performance regression with UVD playback on certain APUs. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_pm.c | 3 +++ drivers/gpu/drm/radeon/radeon_uvd.c | 3 ++- 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index ac07ad1d4f8c..4f6b7fc7ad3c 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -945,6 +945,8 @@ void radeon_dpm_enable_uvd(struct radeon_device *rdev, bool enable) if (enable) { mutex_lock(&rdev->pm.mutex); rdev->pm.dpm.uvd_active = true; + /* disable this for now */ +#if 0 if ((rdev->pm.dpm.sd == 1) && (rdev->pm.dpm.hd == 0)) dpm_state = POWER_STATE_TYPE_INTERNAL_UVD_SD; else if ((rdev->pm.dpm.sd == 2) && (rdev->pm.dpm.hd == 0)) @@ -954,6 +956,7 @@ void radeon_dpm_enable_uvd(struct radeon_device *rdev, bool enable) else if ((rdev->pm.dpm.sd == 0) && (rdev->pm.dpm.hd == 2)) dpm_state = POWER_STATE_TYPE_INTERNAL_UVD_HD2; else +#endif dpm_state = POWER_STATE_TYPE_INTERNAL_UVD; rdev->pm.dpm.state = dpm_state; mutex_unlock(&rdev->pm.mutex); diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c index a0f11856ddde..4f2e73f79638 100644 --- a/drivers/gpu/drm/radeon/radeon_uvd.c +++ b/drivers/gpu/drm/radeon/radeon_uvd.c @@ -798,7 +798,8 @@ void radeon_uvd_note_usage(struct radeon_device *rdev) (rdev->pm.dpm.hd != hd)) { rdev->pm.dpm.sd = sd; rdev->pm.dpm.hd = hd; - streams_changed = true; + /* disable this for now */ + /*streams_changed = true;*/ } } -- cgit v1.2.3 From aa3e146d04b6ae37939daeebaec060562b3db559 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 1 Oct 2013 16:40:45 -0400 Subject: drm/radeon: fix typo in CP DMA register headers Wrong bit offset for SRC endian swapping. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/evergreend.h | 4 ++-- drivers/gpu/drm/radeon/r600d.h | 2 +- drivers/gpu/drm/radeon/sid.h | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h index 8768fd6a1e27..4f6d2962767d 100644 --- a/drivers/gpu/drm/radeon/evergreend.h +++ b/drivers/gpu/drm/radeon/evergreend.h @@ -1501,7 +1501,7 @@ * 6. COMMAND [29:22] | BYTE_COUNT [20:0] */ # define PACKET3_CP_DMA_DST_SEL(x) ((x) << 20) - /* 0 - SRC_ADDR + /* 0 - DST_ADDR * 1 - GDS */ # define PACKET3_CP_DMA_ENGINE(x) ((x) << 27) @@ -1516,7 +1516,7 @@ # define PACKET3_CP_DMA_CP_SYNC (1 << 31) /* COMMAND */ # define PACKET3_CP_DMA_DIS_WC (1 << 21) -# define PACKET3_CP_DMA_CMD_SRC_SWAP(x) ((x) << 23) +# define PACKET3_CP_DMA_CMD_SRC_SWAP(x) ((x) << 22) /* 0 - none * 1 - 8 in 16 * 2 - 8 in 32 diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index e673fe26ea84..7b3c7b5932c5 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -1523,7 +1523,7 @@ */ # define PACKET3_CP_DMA_CP_SYNC (1 << 31) /* COMMAND */ -# define PACKET3_CP_DMA_CMD_SRC_SWAP(x) ((x) << 23) +# define PACKET3_CP_DMA_CMD_SRC_SWAP(x) ((x) << 22) /* 0 - none * 1 - 8 in 16 * 2 - 8 in 32 diff --git a/drivers/gpu/drm/radeon/sid.h b/drivers/gpu/drm/radeon/sid.h index 52d2ab6b67a0..7e2e0ea66a00 100644 --- a/drivers/gpu/drm/radeon/sid.h +++ b/drivers/gpu/drm/radeon/sid.h @@ -1553,7 +1553,7 @@ * 6. COMMAND [30:21] | BYTE_COUNT [20:0] */ # define PACKET3_CP_DMA_DST_SEL(x) ((x) << 20) - /* 0 - SRC_ADDR + /* 0 - DST_ADDR * 1 - GDS */ # define PACKET3_CP_DMA_ENGINE(x) ((x) << 27) @@ -1568,7 +1568,7 @@ # define PACKET3_CP_DMA_CP_SYNC (1 << 31) /* COMMAND */ # define PACKET3_CP_DMA_DIS_WC (1 << 21) -# define PACKET3_CP_DMA_CMD_SRC_SWAP(x) ((x) << 23) +# define PACKET3_CP_DMA_CMD_SRC_SWAP(x) ((x) << 22) /* 0 - none * 1 - 8 in 16 * 2 - 8 in 32 -- cgit v1.2.3 From 50b8f5aec04ebec7dbdf2adb17220b9148c99e63 Mon Sep 17 00:00:00 2001 From: wojciech kapuscinski Date: Tue, 1 Oct 2013 19:54:33 -0400 Subject: drm/radeon: fix hw contexts for SUMO2 asics They have 4 rather than 8. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=63599 Signed-off-by: wojciech kapuscinski Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/evergreen.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 555164e270a7..b5c67a99dda9 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -3131,7 +3131,7 @@ static void evergreen_gpu_init(struct radeon_device *rdev) rdev->config.evergreen.sx_max_export_size = 256; rdev->config.evergreen.sx_max_export_pos_size = 64; rdev->config.evergreen.sx_max_export_smx_size = 192; - rdev->config.evergreen.max_hw_contexts = 8; + rdev->config.evergreen.max_hw_contexts = 4; rdev->config.evergreen.sq_num_cf_insts = 2; rdev->config.evergreen.sc_prim_fifo_size = 0x40; -- cgit v1.2.3 From 89cd67b326fa95872cc2b4524cd807128db6071d Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 1 Jul 2013 19:39:34 +0300 Subject: drm/radeon: forever loop on error in radeon_do_test_moves() The error path does this: for (--i; i >= 0; --i) { which is a forever loop because "i" is unsigned. Signed-off-by: Dan Carpenter Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_test.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_test.c b/drivers/gpu/drm/radeon/radeon_test.c index f4d6bcee9006..12e8099a0823 100644 --- a/drivers/gpu/drm/radeon/radeon_test.c +++ b/drivers/gpu/drm/radeon/radeon_test.c @@ -36,8 +36,8 @@ static void radeon_do_test_moves(struct radeon_device *rdev, int flag) struct radeon_bo *vram_obj = NULL; struct radeon_bo **gtt_obj = NULL; uint64_t gtt_addr, vram_addr; - unsigned i, n, size; - int r, ring; + unsigned n, size; + int i, r, ring; switch (flag) { case RADEON_TEST_COPY_DMA: -- cgit v1.2.3 From 96d8df846f52a720c8ae1fadadfad7c9e733e336 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 27 Sep 2013 23:18:39 +0300 Subject: drm/radeon/dpm/btc: off by one in btc_set_mc_special_registers() It should be ">=" instead of ">" here. The table->mc_reg_address[] array has SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE (16) elements. Signed-off-by: Dan Carpenter Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/btc_dpm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/btc_dpm.c b/drivers/gpu/drm/radeon/btc_dpm.c index b162e98a2953..9b6950d9b3c0 100644 --- a/drivers/gpu/drm/radeon/btc_dpm.c +++ b/drivers/gpu/drm/radeon/btc_dpm.c @@ -1930,7 +1930,7 @@ static int btc_set_mc_special_registers(struct radeon_device *rdev, } j++; - if (j > SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE) + if (j >= SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE) return -EINVAL; tmp = RREG32(MC_PMG_CMD_MRS); @@ -1945,7 +1945,7 @@ static int btc_set_mc_special_registers(struct radeon_device *rdev, } j++; - if (j > SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE) + if (j >= SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE) return -EINVAL; break; case MC_SEQ_RESERVE_M >> 2: @@ -1959,7 +1959,7 @@ static int btc_set_mc_special_registers(struct radeon_device *rdev, } j++; - if (j > SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE) + if (j >= SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE) return -EINVAL; break; default: -- cgit v1.2.3 From 5fd9c581862a4874c0bdaf16231d8873832bbb99 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 28 Sep 2013 12:35:31 +0300 Subject: drm/radeon/dpm: off by one in si_set_mc_special_registers() These checks should be ">=" instead of ">". j is used as an offset into the table->mc_reg_address[] array and that has SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE (16) elements. Signed-off-by: Dan Carpenter Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/si_dpm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c index 9ace28702c76..2332aa1bf93c 100644 --- a/drivers/gpu/drm/radeon/si_dpm.c +++ b/drivers/gpu/drm/radeon/si_dpm.c @@ -5208,7 +5208,7 @@ static int si_set_mc_special_registers(struct radeon_device *rdev, table->mc_reg_table_entry[k].mc_data[j] |= 0x100; } j++; - if (j > SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE) + if (j >= SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE) return -EINVAL; if (!pi->mem_gddr5) { @@ -5218,7 +5218,7 @@ static int si_set_mc_special_registers(struct radeon_device *rdev, table->mc_reg_table_entry[k].mc_data[j] = (table->mc_reg_table_entry[k].mc_data[i] & 0xffff0000) >> 16; j++; - if (j > SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE) + if (j >= SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE) return -EINVAL; } break; @@ -5231,7 +5231,7 @@ static int si_set_mc_special_registers(struct radeon_device *rdev, (temp_reg & 0xffff0000) | (table->mc_reg_table_entry[k].mc_data[i] & 0x0000ffff); j++; - if (j > SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE) + if (j >= SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE) return -EINVAL; break; default: -- cgit v1.2.3 From a6f4ae8dc904ad0e4e416800172fc88f716314dd Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 2 Oct 2013 14:50:57 -0400 Subject: drm/radeon: improve soft reset on SI Disable CG/PG and stop the rlc before resetting. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/si.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index c354c1094967..d4652af425b8 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -85,6 +85,9 @@ extern void si_dma_vm_set_page(struct radeon_device *rdev, uint32_t incr, uint32_t flags); static void si_enable_gui_idle_interrupt(struct radeon_device *rdev, bool enable); +static void si_fini_pg(struct radeon_device *rdev); +static void si_fini_cg(struct radeon_device *rdev); +static void si_rlc_stop(struct radeon_device *rdev); static const u32 verde_rlc_save_restore_register_list[] = { @@ -3608,6 +3611,13 @@ static void si_gpu_soft_reset(struct radeon_device *rdev, u32 reset_mask) dev_info(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x%08X\n", RREG32(VM_CONTEXT1_PROTECTION_FAULT_STATUS)); + /* disable PG/CG */ + si_fini_pg(rdev); + si_fini_cg(rdev); + + /* stop the rlc */ + si_rlc_stop(rdev); + /* Disable CP parsing/prefetching */ WREG32(CP_ME_CNTL, CP_ME_HALT | CP_PFP_HALT | CP_CE_HALT); -- cgit v1.2.3 From fb2c7f4d2e7a40fa4d5cc589f21dad89b371edb0 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 2 Oct 2013 14:54:44 -0400 Subject: drm/radeon: improve soft reset on CIK Disable CG/PG before resetting. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/cik.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index d02fd1c045d5..b874ccdf52f7 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -77,6 +77,8 @@ static void cik_pcie_gen3_enable(struct radeon_device *rdev); static void cik_program_aspm(struct radeon_device *rdev); static void cik_init_pg(struct radeon_device *rdev); static void cik_init_cg(struct radeon_device *rdev); +static void cik_fini_pg(struct radeon_device *rdev); +static void cik_fini_cg(struct radeon_device *rdev); static void cik_enable_gui_idle_interrupt(struct radeon_device *rdev, bool enable); @@ -4185,6 +4187,10 @@ static void cik_gpu_soft_reset(struct radeon_device *rdev, u32 reset_mask) dev_info(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x%08X\n", RREG32(VM_CONTEXT1_PROTECTION_FAULT_STATUS)); + /* disable CG/PG */ + cik_fini_pg(rdev); + cik_fini_cg(rdev); + /* stop the rlc */ cik_rlc_stop(rdev); -- cgit v1.2.3 From 4076a65544e2de310cbf4eaadb13ee15bbfaaf4f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 7 Oct 2013 21:25:39 -0400 Subject: drm/radeon/dpm: disable bapm on TN asics Causes hangs on certain boards. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=70053 Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/trinity_dpm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/trinity_dpm.c b/drivers/gpu/drm/radeon/trinity_dpm.c index 7f998bf1cc9d..9364129ba292 100644 --- a/drivers/gpu/drm/radeon/trinity_dpm.c +++ b/drivers/gpu/drm/radeon/trinity_dpm.c @@ -1868,7 +1868,7 @@ int trinity_dpm_init(struct radeon_device *rdev) for (i = 0; i < SUMO_MAX_HARDWARE_POWERLEVELS; i++) pi->at[i] = TRINITY_AT_DFLT; - pi->enable_bapm = true; + pi->enable_bapm = false; pi->enable_nbps_policy = true; pi->enable_sclk_ds = true; pi->enable_gfx_power_gating = true; -- cgit v1.2.3 From f217c980ca980e3a645b7485ea5eae9a747f4945 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 5 Aug 2013 13:36:00 -0700 Subject: xhci: Don't enable/disable RWE on bus suspend/resume. The RWE bit of the USB 2.0 PORTPMSC register is supposed to enable remote wakeup for devices in the lower power link state L1. It has nothing to do with the device suspend remote wakeup from L2. The RWE bit is designed to be set once (when USB 2.0 LPM is enabled for the port) and cleared only when USB 2.0 LPM is disabled for the port. The xHCI bus suspend method was setting the RWE bit erroneously, and the bus resume method was clearing it. The xHCI 1.0 specification with errata up to Aug 12, 2012 says in section 4.23.5.1.1.1 "Hardware Controlled LPM": "While Hardware USB2 LPM is enabled, software shall not modify the HIRDBESL or RWE fields of the USB2 PORTPMSC register..." If we have previously enabled USB 2.0 LPM for a device, that means when the USB 2.0 bus is resumed, we violate the xHCI specification by clearing RWE. It also means that after a bus resume, the host would think remote wakeup is disabled from L1 for ports with USB 2.0 Link PM enabled, which is not what we want. This patch should be backported to kernels as old as 3.2, that contain the commit 65580b4321eb36f16ae8b5987bfa1bb948fc5112 "xHCI: set USB2 hardware LPM". That was the first kernel that supported USB 2.0 Link PM. Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-hub.c | 26 -------------------------- 1 file changed, 26 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 773a6b28c4f1..e8b4c56dcf62 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1157,18 +1157,6 @@ int xhci_bus_suspend(struct usb_hcd *hcd) t1 = xhci_port_state_to_neutral(t1); if (t1 != t2) xhci_writel(xhci, t2, port_array[port_index]); - - if (hcd->speed != HCD_USB3) { - /* enable remote wake up for USB 2.0 */ - __le32 __iomem *addr; - u32 tmp; - - /* Get the port power control register address. */ - addr = port_array[port_index] + PORTPMSC; - tmp = xhci_readl(xhci, addr); - tmp |= PORT_RWE; - xhci_writel(xhci, tmp, addr); - } } hcd->state = HC_STATE_SUSPENDED; bus_state->next_statechange = jiffies + msecs_to_jiffies(10); @@ -1247,20 +1235,6 @@ int xhci_bus_resume(struct usb_hcd *hcd) xhci_ring_device(xhci, slot_id); } else xhci_writel(xhci, temp, port_array[port_index]); - - if (hcd->speed != HCD_USB3) { - /* disable remote wake up for USB 2.0 */ - __le32 __iomem *addr; - u32 tmp; - - /* Add one to the port status register address to get - * the port power control register address. - */ - addr = port_array[port_index] + PORTPMSC; - tmp = xhci_readl(xhci, addr); - tmp &= ~PORT_RWE; - xhci_writel(xhci, tmp, addr); - } } (void) xhci_readl(xhci, &xhci->op_regs->command); -- cgit v1.2.3 From 455f58925247e8a1a1941e159f3636ad6ee4c90b Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 30 Sep 2013 15:50:54 +0200 Subject: xhci: quirk for extra long delay for S4 It has been reported that this chipset really cannot sleep without this extraordinary delay. This patch should be backported, in order to ensure this host functions under stable kernels. The last quirk for Fresco Logic hosts (commit bba18e33f25072ebf70fd8f7f0cdbf8cdb59a746 "xhci: Extend Fresco Logic MSI quirk.") was backported to stable kernels as old as 2.6.36. Signed-off-by: Oliver Neukum Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-pci.c | 8 ++++++++ drivers/usb/host/xhci.c | 7 ++++++- drivers/usb/host/xhci.h | 1 + 3 files changed, 15 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 236c3aabe940..5444ecdbfb92 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -69,6 +69,14 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) "QUIRK: Fresco Logic xHC needs configure" " endpoint cmd after reset endpoint"); } + if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && + pdev->revision == 0x4) { + xhci->quirks |= XHCI_SLOW_SUSPEND; + xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, + "QUIRK: Fresco Logic xHC revision %u" + "must be suspended extra slowly", + pdev->revision); + } /* Fresco Logic confirms: all revisions of this chip do not * support MSI, even though some of them claim to in their PCI * capabilities. diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 1e36dbb48366..6d3e298a8174 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -839,6 +839,7 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci) int xhci_suspend(struct xhci_hcd *xhci) { int rc = 0; + unsigned int delay = XHCI_MAX_HALT_USEC; struct usb_hcd *hcd = xhci_to_hcd(xhci); u32 command; @@ -861,8 +862,12 @@ int xhci_suspend(struct xhci_hcd *xhci) command = xhci_readl(xhci, &xhci->op_regs->command); command &= ~CMD_RUN; xhci_writel(xhci, command, &xhci->op_regs->command); + + /* Some chips from Fresco Logic need an extraordinary delay */ + delay *= (xhci->quirks & XHCI_SLOW_SUSPEND) ? 10 : 1; + if (xhci_handshake(xhci, &xhci->op_regs->status, - STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC)) { + STS_HALT, STS_HALT, delay)) { xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n"); spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 289fbfbae746..4f82d2172afa 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1548,6 +1548,7 @@ struct xhci_hcd { #define XHCI_COMP_MODE_QUIRK (1 << 14) #define XHCI_AVOID_BEI (1 << 15) #define XHCI_PLAT (1 << 16) +#define XHCI_SLOW_SUSPEND (1 << 17) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ -- cgit v1.2.3 From e459933967aef650c25b3cbe1ff88c8047cac543 Mon Sep 17 00:00:00 2001 From: Xenia Ragiadakou Date: Fri, 20 Sep 2013 19:45:53 +0300 Subject: xhci: fix write to USB3_PSSEN and XUSB2PRM pci config registers The function pci_write_config_dword() sets the appropriate byteordering internally so the value argument should not be converted to little-endian. This bug was found by sparse. This patch is not suitable for stable. Since cpu_to_lei32 is a no-op on little endian systems, this bug would only affect big endian Intel systems with the EHCI to xHCI port switchover, which are non-existent, AFAIK. Signed-off-by: Xenia Ragiadakou Signed-off-by: Sarah Sharp --- drivers/usb/host/pci-quirks.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 2c76ef1320ea..08ef2829a7e2 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -799,7 +799,7 @@ void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev) * switchable ports. */ pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, - cpu_to_le32(ports_available)); + ports_available); pci_read_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, &ports_available); @@ -821,7 +821,7 @@ void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev) * host. */ pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, - cpu_to_le32(ports_available)); + ports_available); pci_read_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, &ports_available); -- cgit v1.2.3 From 638298dc66ea36623dbc2757a24fc2c4ab41b016 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 12 Sep 2013 08:11:06 +0200 Subject: xhci: Fix spurious wakeups after S5 on Haswell Haswell LynxPoint and LynxPoint-LP with the recent Intel BIOS show mysterious wakeups after shutdown occasionally. After discussing with BIOS engineers, they explained that the new BIOS expects that the wakeup sources are cleared and set to D3 for all wakeup devices when the system is going to sleep or power off, but the current xhci driver doesn't do this properly (partly intentionally). This patch introduces a new quirk, XHCI_SPURIOUS_WAKEUP, for fixing the spurious wakeups at S5 by calling xhci_reset() in the xhci shutdown ops as done in xhci_stop(), and setting the device to PCI D3 at shutdown and remove ops. The PCI D3 call is based on the initial fix patch by Oliver Neukum. [Note: Sarah changed the quirk name from XHCI_HSW_SPURIOUS_WAKEUP to XHCI_SPURIOUS_WAKEUP, since none of the other quirks have system names in them. Sarah also fixed a collision with a quirk submitted around the same time, by changing the xhci->quirks bit from 17 to 18.] This patch should be backported to kernels as old as 3.0, that contain the commit 1c12443ab8eba71a658fae4572147e56d1f84f66 "xhci: Add Lynx Point to list of Intel switchable hosts." Cc: Oliver Neukum Signed-off-by: Takashi Iwai Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-pci.c | 17 +++++++++++++++++ drivers/usb/host/xhci.c | 7 +++++++ drivers/usb/host/xhci.h | 1 + 3 files changed, 25 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 5444ecdbfb92..b8dffd59eb25 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -35,6 +35,9 @@ #define PCI_VENDOR_ID_ETRON 0x1b6f #define PCI_DEVICE_ID_ASROCK_P67 0x7023 +#define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31 +#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31 + static const char hcd_name[] = "xhci_hcd"; /* called after powerup, by probe or system-pm "wakeup" */ @@ -118,6 +121,15 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_SPURIOUS_REBOOT; xhci->quirks |= XHCI_AVOID_BEI; } + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI)) { + /* Workaround for occasional spurious wakeups from S5 (or + * any other sleep) on Haswell machines with LPT and LPT-LP + * with the new Intel BIOS + */ + xhci->quirks |= XHCI_SPURIOUS_WAKEUP; + } if (pdev->vendor == PCI_VENDOR_ID_ETRON && pdev->device == PCI_DEVICE_ID_ASROCK_P67) { xhci->quirks |= XHCI_RESET_ON_RESUME; @@ -225,6 +237,11 @@ static void xhci_pci_remove(struct pci_dev *dev) usb_put_hcd(xhci->shared_hcd); } usb_hcd_pci_remove(dev); + + /* Workaround for spurious wakeups at shutdown with HSW */ + if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) + pci_set_power_state(dev, PCI_D3hot); + kfree(xhci); } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 6d3e298a8174..6e0d886bcce5 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -730,6 +730,9 @@ void xhci_shutdown(struct usb_hcd *hcd) spin_lock_irq(&xhci->lock); xhci_halt(xhci); + /* Workaround for spurious wakeups at shutdown with HSW */ + if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) + xhci_reset(xhci); spin_unlock_irq(&xhci->lock); xhci_cleanup_msix(xhci); @@ -737,6 +740,10 @@ void xhci_shutdown(struct usb_hcd *hcd) xhci_dbg_trace(xhci, trace_xhci_dbg_init, "xhci_shutdown completed - status = %x", xhci_readl(xhci, &xhci->op_regs->status)); + + /* Yet another workaround for spurious wakeups at shutdown with HSW */ + if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) + pci_set_power_state(to_pci_dev(hcd->self.controller), PCI_D3hot); } #ifdef CONFIG_PM diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 4f82d2172afa..941d5f59e4dc 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1549,6 +1549,7 @@ struct xhci_hcd { #define XHCI_AVOID_BEI (1 << 15) #define XHCI_PLAT (1 << 16) #define XHCI_SLOW_SUSPEND (1 << 17) +#define XHCI_SPURIOUS_WAKEUP (1 << 18) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ -- cgit v1.2.3 From cccdcea14fc2de8707c52e537fa2b384ccfe7ec2 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 8 Oct 2013 22:35:33 +0200 Subject: i2c: i2c-designware-platdrv: replace platform_driver_probe to support deferred probing Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Reported-by: Zhangfei Gao Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-platdrv.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 4c1b60539a25..0aa01136f8d9 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -270,7 +270,8 @@ static SIMPLE_DEV_PM_OPS(dw_i2c_dev_pm_ops, dw_i2c_suspend, dw_i2c_resume); MODULE_ALIAS("platform:i2c_designware"); static struct platform_driver dw_i2c_driver = { - .remove = dw_i2c_remove, + .probe = dw_i2c_probe, + .remove = dw_i2c_remove, .driver = { .name = "i2c_designware", .owner = THIS_MODULE, @@ -282,7 +283,7 @@ static struct platform_driver dw_i2c_driver = { static int __init dw_i2c_init_driver(void) { - return platform_driver_probe(&dw_i2c_driver, dw_i2c_probe); + return platform_driver_register(&dw_i2c_driver); } subsys_initcall(dw_i2c_init_driver); -- cgit v1.2.3 From 3611431ce7281a6542d47bd5b2fc2206fed5749f Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 8 Oct 2013 22:35:34 +0200 Subject: i2c: i2c-imx: replace platform_driver_probe to support deferred probing MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Acked-by: Uwe Kleine-König Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-imx.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index ccf46656bdad..1d7efa3169cd 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -365,7 +365,7 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) clk_disable_unprepare(i2c_imx->clk); } -static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, +static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, unsigned int rate) { struct imx_i2c_clk_pair *i2c_clk_div = i2c_imx->hwdata->clk_div; @@ -589,7 +589,7 @@ static struct i2c_algorithm i2c_imx_algo = { .functionality = i2c_imx_func, }; -static int __init i2c_imx_probe(struct platform_device *pdev) +static int i2c_imx_probe(struct platform_device *pdev) { const struct of_device_id *of_id = of_match_device(i2c_imx_dt_ids, &pdev->dev); @@ -697,7 +697,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev) return 0; /* Return OK */ } -static int __exit i2c_imx_remove(struct platform_device *pdev) +static int i2c_imx_remove(struct platform_device *pdev) { struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev); @@ -715,7 +715,8 @@ static int __exit i2c_imx_remove(struct platform_device *pdev) } static struct platform_driver i2c_imx_driver = { - .remove = __exit_p(i2c_imx_remove), + .probe = i2c_imx_probe, + .remove = i2c_imx_remove, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, @@ -726,7 +727,7 @@ static struct platform_driver i2c_imx_driver = { static int __init i2c_adap_imx_init(void) { - return platform_driver_probe(&i2c_imx_driver, i2c_imx_probe); + return platform_driver_register(&i2c_imx_driver); } subsys_initcall(i2c_adap_imx_init); -- cgit v1.2.3 From cc40bf9a444f687a7b76450b1ad742b2ea262af4 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 8 Oct 2013 22:35:35 +0200 Subject: i2c: i2c-mxs: replace platform_driver_probe to support deferred probing Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Acked-by: Marek Vasut Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mxs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index f4a01675fa71..b7c857774708 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -780,12 +780,13 @@ static struct platform_driver mxs_i2c_driver = { .owner = THIS_MODULE, .of_match_table = mxs_i2c_dt_ids, }, + .probe = mxs_i2c_probe, .remove = mxs_i2c_remove, }; static int __init mxs_i2c_init(void) { - return platform_driver_probe(&mxs_i2c_driver, mxs_i2c_probe); + return platform_driver_register(&mxs_i2c_driver); } subsys_initcall(mxs_i2c_init); -- cgit v1.2.3 From 6d2cfb109725b748f47a242f87be9c31bf7e42c0 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 8 Oct 2013 22:35:36 +0200 Subject: i2c: i2c-stu300: replace platform_driver_probe to support deferred probing Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Acked-by: Linus Walleij Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-stu300.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c index f8f6f2e552db..04a17b9b38bb 100644 --- a/drivers/i2c/busses/i2c-stu300.c +++ b/drivers/i2c/busses/i2c-stu300.c @@ -859,8 +859,7 @@ static const struct i2c_algorithm stu300_algo = { .functionality = stu300_func, }; -static int __init -stu300_probe(struct platform_device *pdev) +static int stu300_probe(struct platform_device *pdev) { struct stu300_dev *dev; struct i2c_adapter *adap; @@ -966,8 +965,7 @@ static SIMPLE_DEV_PM_OPS(stu300_pm, stu300_suspend, stu300_resume); #define STU300_I2C_PM NULL #endif -static int __exit -stu300_remove(struct platform_device *pdev) +static int stu300_remove(struct platform_device *pdev) { struct stu300_dev *dev = platform_get_drvdata(pdev); @@ -989,13 +987,14 @@ static struct platform_driver stu300_i2c_driver = { .pm = STU300_I2C_PM, .of_match_table = stu300_dt_match, }, - .remove = __exit_p(stu300_remove), + .probe = stu300_probe, + .remove = stu300_remove, }; static int __init stu300_init(void) { - return platform_driver_probe(&stu300_i2c_driver, stu300_probe); + return platform_driver_register(&stu300_i2c_driver); } static void __exit stu300_exit(void) -- cgit v1.2.3 From 47b6e477ed4ecacddd1f82d04d686026e08dc3db Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 10 Oct 2013 08:04:06 +0200 Subject: i2c: Not all adapters have a parent The code in acpi_i2c_register_devices() assumes that all i2c adapters have a parent. This is not necessarily the case, for example the i2c-stub driver instantiate a virtual i2c adapter without a parent. Check for this to avoid a NULL pointer deference. Signed-off-by: Jean Delvare Acked-by: Mika Westerberg Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 29d3f045a2bf..3be58f89ac77 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -1134,6 +1134,9 @@ static void acpi_i2c_register_devices(struct i2c_adapter *adap) acpi_handle handle; acpi_status status; + if (!adap->dev.parent) + return; + handle = ACPI_HANDLE(adap->dev.parent); if (!handle) return; -- cgit v1.2.3 From 4cdbf7d346e7461c3b93a26707c852e2c9db3753 Mon Sep 17 00:00:00 2001 From: Taras Kondratiuk Date: Mon, 7 Oct 2013 13:41:59 +0300 Subject: i2c: omap: Clear ARDY bit twice Initially commit cb527ede1bf6ff2008a025606f25344b8ed7b4ac "i2c-omap: Double clear of ARDY status in IRQ handler" added a workaround for undocumented errata ProDB0017052. But then commit 1d7afc95946487945cc7f5019b41255b72224b70 "i2c: omap: ack IRQ in parts" refactored code and missed one of ARDY clearings. So current code violates errata. It causes often i2c bus timeouts on my Pandaboard. This patch adds a second clearing in place. Signed-off-by: Grygorii Strashko Signed-off-by: Taras Kondratiuk Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-omap.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 6d8308d5dc4e..9967a6f9c2ff 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -939,6 +939,9 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) /* * ProDB0017052: Clear ARDY bit twice */ + if (stat & OMAP_I2C_STAT_ARDY) + omap_i2c_ack_stat(dev, OMAP_I2C_STAT_ARDY); + if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { omap_i2c_ack_stat(dev, (OMAP_I2C_STAT_RRDY | -- cgit v1.2.3 From 492ed77bfadb968cca7beca348cd45b444393cd4 Mon Sep 17 00:00:00 2001 From: Ionut Nicu Date: Tue, 8 Oct 2013 15:51:53 +0200 Subject: i2c: i2c-mux-gpio: don't ignore of_get_named_gpio errors of_get_named_gpio could return -E_PROBE_DEFER or another error code. This error should be passed further instead of being ignored. Signed-off-by: Ionut Nicu Acked-by: Peter Korsgaard Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-mux-gpio.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c index 5d4a99ba743e..7f343bcd492e 100644 --- a/drivers/i2c/muxes/i2c-mux-gpio.c +++ b/drivers/i2c/muxes/i2c-mux-gpio.c @@ -66,7 +66,7 @@ static int i2c_mux_gpio_probe_dt(struct gpiomux *mux, struct device_node *adapter_np, *child; struct i2c_adapter *adapter; unsigned *values, *gpios; - int i = 0; + int i = 0, ret; if (!np) return -ENODEV; @@ -116,8 +116,12 @@ static int i2c_mux_gpio_probe_dt(struct gpiomux *mux, return -ENOMEM; } - for (i = 0; i < mux->data.n_gpios; i++) - gpios[i] = of_get_named_gpio(np, "mux-gpios", i); + for (i = 0; i < mux->data.n_gpios; i++) { + ret = of_get_named_gpio(np, "mux-gpios", i); + if (ret < 0) + return ret; + gpios[i] = ret; + } mux->data.gpios = gpios; -- cgit v1.2.3 From 9937b8d89e1b70c08330b57afbc62c934e37c9e2 Mon Sep 17 00:00:00 2001 From: Ionut Nicu Date: Wed, 9 Oct 2013 11:50:45 +0200 Subject: i2c: i2c-mux-gpio: use deferred probing If the i2c-parent bus driver is not loaded, returning -ENODEV will force people to unload and then reload the module again to get it working. Signed-off-by: Ionut Nicu Acked-by: Peter Korsgaard Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-mux-gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c index 7f343bcd492e..a764da777f08 100644 --- a/drivers/i2c/muxes/i2c-mux-gpio.c +++ b/drivers/i2c/muxes/i2c-mux-gpio.c @@ -79,7 +79,7 @@ static int i2c_mux_gpio_probe_dt(struct gpiomux *mux, adapter = of_find_i2c_adapter_by_node(adapter_np); if (!adapter) { dev_err(&pdev->dev, "Cannot find parent bus\n"); - return -ENODEV; + return -EPROBE_DEFER; } mux->data.parent = i2c_adapter_id(adapter); put_device(&adapter->dev); @@ -181,7 +181,7 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev) if (!parent) { dev_err(&pdev->dev, "Parent adapter (%d) not found\n", mux->data.parent); - return -ENODEV; + return -EPROBE_DEFER; } mux->parent = parent; -- cgit v1.2.3 From 0cd98069ad7acb2a1bdb1bb71b904c1aae0033d0 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 10 Oct 2013 10:19:13 +0200 Subject: i2c: i2c-arb-gpio-challenge: use deferred probe when adapter not found If it is not there yet, it might appear later. Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-arb-gpio-challenge.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c index 74b41ae690f3..928656e241dd 100644 --- a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c +++ b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c @@ -200,7 +200,7 @@ static int i2c_arbitrator_probe(struct platform_device *pdev) arb->parent = of_find_i2c_adapter_by_node(parent_np); if (!arb->parent) { dev_err(dev, "Cannot find parent bus\n"); - return -EINVAL; + return -EPROBE_DEFER; } /* Actually add the mux adapter */ -- cgit v1.2.3 From 2737de460e33df89461a59b247d3bfd477101785 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 10 Oct 2013 10:19:13 +0200 Subject: i2c: i2c-mux-pinctrl: use deferred probe when adapter not found If it is not there yet, it might appear later. Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-mux-pinctrl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c index 69a91732ae65..68a37157377d 100644 --- a/drivers/i2c/muxes/i2c-mux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c @@ -113,7 +113,7 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux, adapter = of_find_i2c_adapter_by_node(adapter_np); if (!adapter) { dev_err(mux->dev, "Cannot find parent bus\n"); - return -ENODEV; + return -EPROBE_DEFER; } mux->pdata->parent_bus_num = i2c_adapter_id(adapter); put_device(&adapter->dev); @@ -211,7 +211,7 @@ static int i2c_mux_pinctrl_probe(struct platform_device *pdev) if (!mux->parent) { dev_err(&pdev->dev, "Parent adapter (%d) not found\n", mux->pdata->parent_bus_num); - ret = -ENODEV; + ret = -EPROBE_DEFER; goto err; } -- cgit v1.2.3 From 8702c675319b838346a4fbaf4bbb783a563fa9a6 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 10 Oct 2013 14:38:27 +0000 Subject: tpm: xen-tpmfront: fix missing declaration of xen_domain MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit xen-tpmfront fails to build on arm64 with the following error: drivers/char/tpm/xen-tpmfront.c: In function ‘xen_tpmfront_init’: drivers/char/tpm/xen-tpmfront.c:422:2: error: implicit declaration of function ‘xen_domain’ [-Werror=implicit-function-declaration] Add include of xen/xen.h to fix this. Signed-off-by: Rob Herring Signed-off-by: Stefano Stabellini Reviewed-by: Ashley Lai Acked-by: Ashley Lai Cc: Leonidas Da Silva Barbosa Cc: Rajiv Andrade Cc: Marcel Selhorst Cc: Sirrix AG Cc: tpmdd-devel@lists.sourceforge.net --- drivers/char/tpm/xen-tpmfront.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/char/tpm/xen-tpmfront.c b/drivers/char/tpm/xen-tpmfront.c index 06189e55b4e5..94c280d36e8b 100644 --- a/drivers/char/tpm/xen-tpmfront.c +++ b/drivers/char/tpm/xen-tpmfront.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From b852c985010a77c850b7548d64bbb964ca462b02 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 10 Oct 2013 11:47:01 -0400 Subject: drm/radeon: re-enable sw ACR support on pre-DCE4 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit HW ACR support may have issues on some older chips, so use SW ACR for now until we've tested further. Signed-off-by: Alex Deucher CC: Rafał Miłecki --- drivers/gpu/drm/radeon/r600_hdmi.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index e2ae1c237fb4..5b729319f27b 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -451,6 +451,7 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod } WREG32(HDMI0_ACR_PACKET_CONTROL + offset, + HDMI0_ACR_SOURCE | /* select SW CTS value - XXX verify that hw CTS works on all families */ HDMI0_ACR_AUTO_SEND); /* allow hw to sent ACR packets when required */ WREG32(HDMI0_VBI_PACKET_CONTROL + offset, -- cgit v1.2.3 From b125a54bfd7734a44253d2f2909a3c609768c1ec Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 11 Sep 2013 16:35:22 +0300 Subject: IB/mlx5: Fix send work queue size calculation 1. Make sure wqe_cnt does not exceed the limit published by firmware. 2. There is no requirement that the number of outstanding work requests will be a power of two. Remove the ilog2 in the calculation of sq.max_post to fix that. 3. Add case for IB_QPT_XRC_TGT in sq_overhead and return 0 as XRC target QPs do not have a send queue. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx5/qp.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index 045f8cdbd303..05d53f184744 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -203,7 +203,7 @@ static int sq_overhead(enum ib_qp_type qp_type) switch (qp_type) { case IB_QPT_XRC_INI: - size = sizeof(struct mlx5_wqe_xrc_seg); + size += sizeof(struct mlx5_wqe_xrc_seg); /* fall through */ case IB_QPT_RC: size += sizeof(struct mlx5_wqe_ctrl_seg) + @@ -211,20 +211,23 @@ static int sq_overhead(enum ib_qp_type qp_type) sizeof(struct mlx5_wqe_raddr_seg); break; + case IB_QPT_XRC_TGT: + return 0; + case IB_QPT_UC: - size = sizeof(struct mlx5_wqe_ctrl_seg) + + size += sizeof(struct mlx5_wqe_ctrl_seg) + sizeof(struct mlx5_wqe_raddr_seg); break; case IB_QPT_UD: case IB_QPT_SMI: case IB_QPT_GSI: - size = sizeof(struct mlx5_wqe_ctrl_seg) + + size += sizeof(struct mlx5_wqe_ctrl_seg) + sizeof(struct mlx5_wqe_datagram_seg); break; case MLX5_IB_QPT_REG_UMR: - size = sizeof(struct mlx5_wqe_ctrl_seg) + + size += sizeof(struct mlx5_wqe_ctrl_seg) + sizeof(struct mlx5_wqe_umr_ctrl_seg) + sizeof(struct mlx5_mkey_seg); break; @@ -270,7 +273,8 @@ static int calc_sq_size(struct mlx5_ib_dev *dev, struct ib_qp_init_attr *attr, return wqe_size; if (wqe_size > dev->mdev.caps.max_sq_desc_sz) { - mlx5_ib_dbg(dev, "\n"); + mlx5_ib_dbg(dev, "wqe_size(%d) > max_sq_desc_sz(%d)\n", + wqe_size, dev->mdev.caps.max_sq_desc_sz); return -EINVAL; } @@ -280,9 +284,15 @@ static int calc_sq_size(struct mlx5_ib_dev *dev, struct ib_qp_init_attr *attr, wq_size = roundup_pow_of_two(attr->cap.max_send_wr * wqe_size); qp->sq.wqe_cnt = wq_size / MLX5_SEND_WQE_BB; + if (qp->sq.wqe_cnt > dev->mdev.caps.max_wqes) { + mlx5_ib_dbg(dev, "wqe count(%d) exceeds limits(%d)\n", + qp->sq.wqe_cnt, dev->mdev.caps.max_wqes); + return -ENOMEM; + } qp->sq.wqe_shift = ilog2(MLX5_SEND_WQE_BB); qp->sq.max_gs = attr->cap.max_send_sge; - qp->sq.max_post = 1 << ilog2(wq_size / wqe_size); + qp->sq.max_post = wq_size / wqe_size; + attr->cap.max_send_wr = qp->sq.max_post; return wq_size; } -- cgit v1.2.3 From 3c4619114cb6760d2c97fd562ea96d2c8786b56a Mon Sep 17 00:00:00 2001 From: Moshe Lazer Date: Wed, 11 Sep 2013 16:35:23 +0300 Subject: IB/mlx5: Flush cache workqueue before destroying it Destroying the workqueue without flushing it first can lead to a case in which the kernel tries to push a delayed work to the workqueue which does not exist anymore. Signed-off-by: Moshe Lazer Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx5/mr.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c index bd41df95b6f0..e86dbbdb3836 100644 --- a/drivers/infiniband/hw/mlx5/mr.c +++ b/drivers/infiniband/hw/mlx5/mr.c @@ -415,6 +415,7 @@ static void clean_keys(struct mlx5_ib_dev *dev, int c) int size; int err; + cancel_delayed_work(&ent->dwork); while (1) { spin_lock(&ent->lock); if (list_empty(&ent->head)) { @@ -540,13 +541,15 @@ int mlx5_mr_cache_cleanup(struct mlx5_ib_dev *dev) int i; dev->cache.stopped = 1; - destroy_workqueue(dev->cache.wq); + flush_workqueue(dev->cache.wq); mlx5_mr_cache_debugfs_cleanup(dev); for (i = 0; i < MAX_MR_CACHE_ENTRIES; i++) clean_keys(dev, i); + destroy_workqueue(dev->cache.wq); + return 0; } -- cgit v1.2.3 From 56e1ab0f13509ff9ceaab2fb668c80e6722e1c94 Mon Sep 17 00:00:00 2001 From: Moshe Lazer Date: Wed, 11 Sep 2013 16:35:24 +0300 Subject: IB/mlx5: Fix memory leak in mlx5_ib_create_srq The patch fixes the rollback in case of failure in creating SRQ. Signed-off-by: Moshe Lazer Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx5/srq.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/srq.c b/drivers/infiniband/hw/mlx5/srq.c index 84d297afd6a9..0aa478bc291a 100644 --- a/drivers/infiniband/hw/mlx5/srq.c +++ b/drivers/infiniband/hw/mlx5/srq.c @@ -295,7 +295,7 @@ struct ib_srq *mlx5_ib_create_srq(struct ib_pd *pd, mlx5_vfree(in); if (err) { mlx5_ib_dbg(dev, "create SRQ failed, err %d\n", err); - goto err_srq; + goto err_usr_kern_srq; } mlx5_ib_dbg(dev, "create SRQ with srqn 0x%x\n", srq->msrq.srqn); @@ -316,6 +316,8 @@ struct ib_srq *mlx5_ib_create_srq(struct ib_pd *pd, err_core: mlx5_core_destroy_srq(&dev->mdev, &srq->msrq); + +err_usr_kern_srq: if (pd->uobject) destroy_srq_user(pd, srq); else -- cgit v1.2.3 From c1868b822515313c72445e70b7d9e47d8815bc52 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 11 Sep 2013 16:35:25 +0300 Subject: mlx5: Remove checksum on command interface commands Checksum calculations consume CPU resources and can be significant to the rate of resource creation/destruction. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 26 ++++++++++++++------------ drivers/net/ethernet/mellanox/mlx5/core/main.c | 21 +++++---------------- 2 files changed, 19 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index 5472cbd34028..db3a6584939f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -180,28 +180,32 @@ static int verify_block_sig(struct mlx5_cmd_prot_block *block) return 0; } -static void calc_block_sig(struct mlx5_cmd_prot_block *block, u8 token) +static void calc_block_sig(struct mlx5_cmd_prot_block *block, u8 token, + int csum) { block->token = token; - block->ctrl_sig = ~xor8_buf(block->rsvd0, sizeof(*block) - sizeof(block->data) - 2); - block->sig = ~xor8_buf(block, sizeof(*block) - 1); + if (csum) { + block->ctrl_sig = ~xor8_buf(block->rsvd0, sizeof(*block) - + sizeof(block->data) - 2); + block->sig = ~xor8_buf(block, sizeof(*block) - 1); + } } -static void calc_chain_sig(struct mlx5_cmd_msg *msg, u8 token) +static void calc_chain_sig(struct mlx5_cmd_msg *msg, u8 token, int csum) { struct mlx5_cmd_mailbox *next = msg->next; while (next) { - calc_block_sig(next->buf, token); + calc_block_sig(next->buf, token, csum); next = next->next; } } -static void set_signature(struct mlx5_cmd_work_ent *ent) +static void set_signature(struct mlx5_cmd_work_ent *ent, int csum) { ent->lay->sig = ~xor8_buf(ent->lay, sizeof(*ent->lay)); - calc_chain_sig(ent->in, ent->token); - calc_chain_sig(ent->out, ent->token); + calc_chain_sig(ent->in, ent->token, csum); + calc_chain_sig(ent->out, ent->token, csum); } static void poll_timeout(struct mlx5_cmd_work_ent *ent) @@ -539,8 +543,7 @@ static void cmd_work_handler(struct work_struct *work) lay->type = MLX5_PCI_CMD_XPORT; lay->token = ent->token; lay->status_own = CMD_OWNER_HW; - if (!cmd->checksum_disabled) - set_signature(ent); + set_signature(ent, !cmd->checksum_disabled); dump_command(dev, ent, 1); ktime_get_ts(&ent->ts1); @@ -773,8 +776,6 @@ static int mlx5_copy_from_msg(void *to, struct mlx5_cmd_msg *from, int size) copy = min_t(int, size, MLX5_CMD_DATA_BLOCK_SIZE); block = next->buf; - if (xor8_buf(block, sizeof(*block)) != 0xff) - return -EINVAL; memcpy(to, block->data, copy); to += copy; @@ -1361,6 +1362,7 @@ int mlx5_cmd_init(struct mlx5_core_dev *dev) goto err_map; } + cmd->checksum_disabled = 1; cmd->max_reg_cmds = (1 << cmd->log_sz) - 1; cmd->bitmask = (1 << cmd->max_reg_cmds) - 1; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index b47739b0b5f6..bc0f5fb66e24 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -165,9 +165,7 @@ static int handle_hca_cap(struct mlx5_core_dev *dev) struct mlx5_cmd_set_hca_cap_mbox_in *set_ctx = NULL; struct mlx5_cmd_query_hca_cap_mbox_in query_ctx; struct mlx5_cmd_set_hca_cap_mbox_out set_out; - struct mlx5_profile *prof = dev->profile; u64 flags; - int csum = 1; int err; memset(&query_ctx, 0, sizeof(query_ctx)); @@ -197,20 +195,14 @@ static int handle_hca_cap(struct mlx5_core_dev *dev) memcpy(&set_ctx->hca_cap, &query_out->hca_cap, sizeof(set_ctx->hca_cap)); - if (prof->mask & MLX5_PROF_MASK_CMDIF_CSUM) { - csum = !!prof->cmdif_csum; - flags = be64_to_cpu(set_ctx->hca_cap.flags); - if (csum) - flags |= MLX5_DEV_CAP_FLAG_CMDIF_CSUM; - else - flags &= ~MLX5_DEV_CAP_FLAG_CMDIF_CSUM; - - set_ctx->hca_cap.flags = cpu_to_be64(flags); - } - if (dev->profile->mask & MLX5_PROF_MASK_QP_SIZE) set_ctx->hca_cap.log_max_qp = dev->profile->log_max_qp; + flags = be64_to_cpu(query_out->hca_cap.flags); + /* disable checksum */ + flags &= ~MLX5_DEV_CAP_FLAG_CMDIF_CSUM; + + set_ctx->hca_cap.flags = cpu_to_be64(flags); memset(&set_out, 0, sizeof(set_out)); set_ctx->hca_cap.log_uar_page_sz = cpu_to_be16(PAGE_SHIFT - 12); set_ctx->hdr.opcode = cpu_to_be16(MLX5_CMD_OP_SET_HCA_CAP); @@ -225,9 +217,6 @@ static int handle_hca_cap(struct mlx5_core_dev *dev) if (err) goto query_ex; - if (!csum) - dev->cmd.checksum_disabled = 1; - query_ex: kfree(query_out); kfree(set_ctx); -- cgit v1.2.3 From 203099fd731c8d74da3b00c895cfd68c6cf1ff73 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 11 Sep 2013 16:35:26 +0300 Subject: IB/mlx5: Decrease memory consumption of mr caches Change the logic so we do not allocate memory nor map the device before actually posting to the REG_UMR QP. In addition, unmap and free the memory after we get completion. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx5/mr.c | 57 ++++++++++++++++------------------------- 1 file changed, 22 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c index e86dbbdb3836..06e33e6cb07f 100644 --- a/drivers/infiniband/hw/mlx5/mr.c +++ b/drivers/infiniband/hw/mlx5/mr.c @@ -61,13 +61,11 @@ static int order2idx(struct mlx5_ib_dev *dev, int order) static int add_keys(struct mlx5_ib_dev *dev, int c, int num) { - struct device *ddev = dev->ib_dev.dma_device; struct mlx5_mr_cache *cache = &dev->cache; struct mlx5_cache_ent *ent = &cache->ent[c]; struct mlx5_create_mkey_mbox_in *in; struct mlx5_ib_mr *mr; int npages = 1 << ent->order; - int size = sizeof(u64) * npages; int err = 0; int i; @@ -83,21 +81,6 @@ static int add_keys(struct mlx5_ib_dev *dev, int c, int num) } mr->order = ent->order; mr->umred = 1; - mr->pas = kmalloc(size + 0x3f, GFP_KERNEL); - if (!mr->pas) { - kfree(mr); - err = -ENOMEM; - goto out; - } - mr->dma = dma_map_single(ddev, mr_align(mr->pas, 0x40), size, - DMA_TO_DEVICE); - if (dma_mapping_error(ddev, mr->dma)) { - kfree(mr->pas); - kfree(mr); - err = -ENOMEM; - goto out; - } - in->seg.status = 1 << 6; in->seg.xlt_oct_size = cpu_to_be32((npages + 1) / 2); in->seg.qpn_mkey7_0 = cpu_to_be32(0xffffff << 8); @@ -108,8 +91,6 @@ static int add_keys(struct mlx5_ib_dev *dev, int c, int num) sizeof(*in)); if (err) { mlx5_ib_warn(dev, "create mkey failed %d\n", err); - dma_unmap_single(ddev, mr->dma, size, DMA_TO_DEVICE); - kfree(mr->pas); kfree(mr); goto out; } @@ -129,11 +110,9 @@ out: static void remove_keys(struct mlx5_ib_dev *dev, int c, int num) { - struct device *ddev = dev->ib_dev.dma_device; struct mlx5_mr_cache *cache = &dev->cache; struct mlx5_cache_ent *ent = &cache->ent[c]; struct mlx5_ib_mr *mr; - int size; int err; int i; @@ -149,14 +128,10 @@ static void remove_keys(struct mlx5_ib_dev *dev, int c, int num) ent->size--; spin_unlock(&ent->lock); err = mlx5_core_destroy_mkey(&dev->mdev, &mr->mmr); - if (err) { + if (err) mlx5_ib_warn(dev, "failed destroy mkey\n"); - } else { - size = ALIGN(sizeof(u64) * (1 << mr->order), 0x40); - dma_unmap_single(ddev, mr->dma, size, DMA_TO_DEVICE); - kfree(mr->pas); + else kfree(mr); - } } } @@ -408,11 +383,9 @@ static void free_cached_mr(struct mlx5_ib_dev *dev, struct mlx5_ib_mr *mr) static void clean_keys(struct mlx5_ib_dev *dev, int c) { - struct device *ddev = dev->ib_dev.dma_device; struct mlx5_mr_cache *cache = &dev->cache; struct mlx5_cache_ent *ent = &cache->ent[c]; struct mlx5_ib_mr *mr; - int size; int err; cancel_delayed_work(&ent->dwork); @@ -428,14 +401,10 @@ static void clean_keys(struct mlx5_ib_dev *dev, int c) ent->size--; spin_unlock(&ent->lock); err = mlx5_core_destroy_mkey(&dev->mdev, &mr->mmr); - if (err) { + if (err) mlx5_ib_warn(dev, "failed destroy mkey\n"); - } else { - size = ALIGN(sizeof(u64) * (1 << mr->order), 0x40); - dma_unmap_single(ddev, mr->dma, size, DMA_TO_DEVICE); - kfree(mr->pas); + else kfree(mr); - } } } @@ -678,10 +647,12 @@ static struct mlx5_ib_mr *reg_umr(struct ib_pd *pd, struct ib_umem *umem, int page_shift, int order, int access_flags) { struct mlx5_ib_dev *dev = to_mdev(pd->device); + struct device *ddev = dev->ib_dev.dma_device; struct umr_common *umrc = &dev->umrc; struct ib_send_wr wr, *bad; struct mlx5_ib_mr *mr; struct ib_sge sg; + int size = sizeof(u64) * npages; int err; int i; @@ -700,6 +671,19 @@ static struct mlx5_ib_mr *reg_umr(struct ib_pd *pd, struct ib_umem *umem, if (!mr) return ERR_PTR(-EAGAIN); + mr->pas = kmalloc(size + 0x3f, GFP_KERNEL); + if (!mr->pas) { + err = -ENOMEM; + goto error; + } + mr->dma = dma_map_single(ddev, mr_align(mr->pas, 0x40), size, + DMA_TO_DEVICE); + if (dma_mapping_error(ddev, mr->dma)) { + kfree(mr->pas); + err = -ENOMEM; + goto error; + } + mlx5_ib_populate_pas(dev, umem, page_shift, mr_align(mr->pas, 0x40), 1); memset(&wr, 0, sizeof(wr)); @@ -721,6 +705,9 @@ static struct mlx5_ib_mr *reg_umr(struct ib_pd *pd, struct ib_umem *umem, wait_for_completion(&mr->done); up(&umrc->sem); + dma_unmap_single(ddev, mr->dma, size, DMA_TO_DEVICE); + kfree(mr->pas); + if (mr->status != IB_WC_SUCCESS) { mlx5_ib_warn(dev, "reg umr failed\n"); err = -EFAULT; -- cgit v1.2.3 From a0c84c326f720c3e3ebb9c49cbce916c05a57297 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 11 Sep 2013 16:35:27 +0300 Subject: IB/mlx5: Avoid async events on invalid port number On a single ported Connect-IB, its possible for the firmware to issue events on the non-existing 2nd port. Make sure to ignore events generated for such ports. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx5/main.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index 3f831de9a4d8..e59761ed7d00 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -1006,6 +1006,11 @@ static void mlx5_ib_event(struct mlx5_core_dev *dev, enum mlx5_dev_event event, ibev.device = &ibdev->ib_dev; ibev.element.port_num = port; + if (port < 1 || port > ibdev->num_ports) { + mlx5_ib_warn(ibdev, "warning: event on port %d\n", port); + return; + } + if (ibdev->ib_active) ib_dispatch_event(&ibev); } -- cgit v1.2.3 From dabed0e6319a1900c8738676bd197f06b5b5b6cc Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 11 Sep 2013 16:35:28 +0300 Subject: mlx5: Keep polling to reclaim pages while any returned Change mlx5_reclaim_startup_pages() to keep polling while any pages are returned. If none are returned, keep polling for five more seconds before exiting with an error message. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c b/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c index 3a2408d44820..7b12acf210f8 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c @@ -90,6 +90,10 @@ struct mlx5_manage_pages_outbox { __be64 pas[0]; }; +enum { + MAX_RECLAIM_TIME_MSECS = 5000, +}; + static int insert_page(struct mlx5_core_dev *dev, u64 addr, struct page *page, u16 func_id) { struct rb_root *root = &dev->priv.page_root; @@ -279,6 +283,9 @@ static int reclaim_pages(struct mlx5_core_dev *dev, u32 func_id, int npages, int err; int i; + if (nclaimed) + *nclaimed = 0; + memset(&in, 0, sizeof(in)); outlen = sizeof(*out) + npages * sizeof(out->pas[0]); out = mlx5_vzalloc(outlen); @@ -388,20 +395,25 @@ static int optimal_reclaimed_pages(void) int mlx5_reclaim_startup_pages(struct mlx5_core_dev *dev) { - unsigned long end = jiffies + msecs_to_jiffies(5000); + unsigned long end = jiffies + msecs_to_jiffies(MAX_RECLAIM_TIME_MSECS); struct fw_page *fwp; struct rb_node *p; + int nclaimed = 0; int err; do { p = rb_first(&dev->priv.page_root); if (p) { fwp = rb_entry(p, struct fw_page, rb_node); - err = reclaim_pages(dev, fwp->func_id, optimal_reclaimed_pages(), NULL); + err = reclaim_pages(dev, fwp->func_id, + optimal_reclaimed_pages(), + &nclaimed); if (err) { mlx5_core_warn(dev, "failed reclaiming pages (%d)\n", err); return err; } + if (nclaimed) + end = jiffies + msecs_to_jiffies(MAX_RECLAIM_TIME_MSECS); } if (time_after(jiffies, end)) { mlx5_core_warn(dev, "FW did not return all pages. giving up...\n"); -- cgit v1.2.3 From 81bea28ffdaad0bd3bf745ec399edb0387f4799d Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 11 Sep 2013 16:35:30 +0300 Subject: IB/mlx5: Disable atomic operations Currently Atomic operations don't work properly. Disable them for the time being. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx5/main.c | 5 ++-- drivers/infiniband/hw/mlx5/qp.c | 48 ++++----------------------------------- 2 files changed, 6 insertions(+), 47 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index e59761ed7d00..b267c65261c0 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -301,9 +301,8 @@ static int mlx5_ib_query_device(struct ib_device *ibdev, props->max_srq_sge = max_rq_sg - 1; props->max_fast_reg_page_list_len = (unsigned int)-1; props->local_ca_ack_delay = dev->mdev.caps.local_ca_ack_delay; - props->atomic_cap = dev->mdev.caps.flags & MLX5_DEV_CAP_FLAG_ATOMIC ? - IB_ATOMIC_HCA : IB_ATOMIC_NONE; - props->masked_atomic_cap = IB_ATOMIC_HCA; + props->atomic_cap = IB_ATOMIC_NONE; + props->masked_atomic_cap = IB_ATOMIC_NONE; props->max_pkeys = be16_to_cpup((__be16 *)(out_mad->data + 28)); props->max_mcast_grp = 1 << dev->mdev.caps.log_max_mcg; props->max_mcast_qp_attach = dev->mdev.caps.max_qp_mcg; diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index 05d53f184744..10b077db42e8 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -1661,29 +1661,6 @@ static __always_inline void set_raddr_seg(struct mlx5_wqe_raddr_seg *rseg, rseg->reserved = 0; } -static void set_atomic_seg(struct mlx5_wqe_atomic_seg *aseg, struct ib_send_wr *wr) -{ - if (wr->opcode == IB_WR_ATOMIC_CMP_AND_SWP) { - aseg->swap_add = cpu_to_be64(wr->wr.atomic.swap); - aseg->compare = cpu_to_be64(wr->wr.atomic.compare_add); - } else if (wr->opcode == IB_WR_MASKED_ATOMIC_FETCH_AND_ADD) { - aseg->swap_add = cpu_to_be64(wr->wr.atomic.compare_add); - aseg->compare = cpu_to_be64(wr->wr.atomic.compare_add_mask); - } else { - aseg->swap_add = cpu_to_be64(wr->wr.atomic.compare_add); - aseg->compare = 0; - } -} - -static void set_masked_atomic_seg(struct mlx5_wqe_masked_atomic_seg *aseg, - struct ib_send_wr *wr) -{ - aseg->swap_add = cpu_to_be64(wr->wr.atomic.swap); - aseg->swap_add_mask = cpu_to_be64(wr->wr.atomic.swap_mask); - aseg->compare = cpu_to_be64(wr->wr.atomic.compare_add); - aseg->compare_mask = cpu_to_be64(wr->wr.atomic.compare_add_mask); -} - static void set_datagram_seg(struct mlx5_wqe_datagram_seg *dseg, struct ib_send_wr *wr) { @@ -2073,28 +2050,11 @@ int mlx5_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, case IB_WR_ATOMIC_CMP_AND_SWP: case IB_WR_ATOMIC_FETCH_AND_ADD: - set_raddr_seg(seg, wr->wr.atomic.remote_addr, - wr->wr.atomic.rkey); - seg += sizeof(struct mlx5_wqe_raddr_seg); - - set_atomic_seg(seg, wr); - seg += sizeof(struct mlx5_wqe_atomic_seg); - - size += (sizeof(struct mlx5_wqe_raddr_seg) + - sizeof(struct mlx5_wqe_atomic_seg)) / 16; - break; - case IB_WR_MASKED_ATOMIC_CMP_AND_SWP: - set_raddr_seg(seg, wr->wr.atomic.remote_addr, - wr->wr.atomic.rkey); - seg += sizeof(struct mlx5_wqe_raddr_seg); - - set_masked_atomic_seg(seg, wr); - seg += sizeof(struct mlx5_wqe_masked_atomic_seg); - - size += (sizeof(struct mlx5_wqe_raddr_seg) + - sizeof(struct mlx5_wqe_masked_atomic_seg)) / 16; - break; + mlx5_ib_warn(dev, "Atomic operations are not supported yet\n"); + err = -ENOSYS; + *bad_wr = wr; + goto out; case IB_WR_LOCAL_INV: next_fence = MLX5_FENCE_MODE_INITIATOR_SMALL; -- cgit v1.2.3 From 75959f56feefe7649f57f83166efecdd6bebe0ec Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 11 Sep 2013 16:35:31 +0300 Subject: mlx5: Fix opt param mask for sq err to rts transition Add missing entry in the table for UC transport. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx5/qp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index 10b077db42e8..546d3e993207 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -1324,6 +1324,7 @@ static enum mlx5_qp_optpar opt_mask[MLX5_QP_NUM_STATE][MLX5_QP_NUM_STATE][MLX5_Q [MLX5_QP_STATE_RTS] = { [MLX5_QP_ST_UD] = MLX5_QP_OPTPAR_Q_KEY, [MLX5_QP_ST_MLX] = MLX5_QP_OPTPAR_Q_KEY, + [MLX5_QP_ST_UC] = MLX5_QP_OPTPAR_RWE, }, }, }; -- cgit v1.2.3 From a4774e9095de0c4ca90b7bcf6068369a66a91e36 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 11 Sep 2013 16:35:32 +0300 Subject: IB/mlx5: Fix opt param mask according to firmware spec Failed to configure opt mask to configure rre from init to rtr. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx5/qp.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index 546d3e993207..5659ea880741 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -1290,6 +1290,11 @@ static enum mlx5_qp_optpar opt_mask[MLX5_QP_NUM_STATE][MLX5_QP_NUM_STATE][MLX5_Q MLX5_QP_OPTPAR_Q_KEY, [MLX5_QP_ST_MLX] = MLX5_QP_OPTPAR_PKEY_INDEX | MLX5_QP_OPTPAR_Q_KEY, + [MLX5_QP_ST_XRC] = MLX5_QP_OPTPAR_ALT_ADDR_PATH | + MLX5_QP_OPTPAR_RRE | + MLX5_QP_OPTPAR_RAE | + MLX5_QP_OPTPAR_RWE | + MLX5_QP_OPTPAR_PKEY_INDEX, }, }, [MLX5_QP_STATE_RTR] = { @@ -1325,6 +1330,10 @@ static enum mlx5_qp_optpar opt_mask[MLX5_QP_NUM_STATE][MLX5_QP_NUM_STATE][MLX5_Q [MLX5_QP_ST_UD] = MLX5_QP_OPTPAR_Q_KEY, [MLX5_QP_ST_MLX] = MLX5_QP_OPTPAR_Q_KEY, [MLX5_QP_ST_UC] = MLX5_QP_OPTPAR_RWE, + [MLX5_QP_ST_RC] = MLX5_QP_OPTPAR_RNR_TIMEOUT | + MLX5_QP_OPTPAR_RWE | + MLX5_QP_OPTPAR_RAE | + MLX5_QP_OPTPAR_RRE, }, }, }; -- cgit v1.2.3 From 9c8651314bea18a8a811296289adbf06c8b8b12b Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 11 Sep 2013 16:35:33 +0300 Subject: mlx5: Fix error code translation from firmware to driver Limits exceeded should be translated to ENOMEM. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index db3a6584939f..6ca30739625f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -1512,7 +1512,7 @@ int mlx5_cmd_status_to_err(struct mlx5_outbox_hdr *hdr) case MLX5_CMD_STAT_BAD_SYS_STATE_ERR: return -EIO; case MLX5_CMD_STAT_BAD_RES_ERR: return -EINVAL; case MLX5_CMD_STAT_RES_BUSY: return -EBUSY; - case MLX5_CMD_STAT_LIM_ERR: return -EINVAL; + case MLX5_CMD_STAT_LIM_ERR: return -ENOMEM; case MLX5_CMD_STAT_BAD_RES_STATE_ERR: return -EINVAL; case MLX5_CMD_STAT_IX_ERR: return -EINVAL; case MLX5_CMD_STAT_NO_RES_ERR: return -EAGAIN; -- cgit v1.2.3 From ada9f5d007971a71d619e2abf66ebd3a9a399413 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Wed, 11 Sep 2013 16:35:34 +0300 Subject: IB/mlx5: Fix eq names to display nicely in /proc/interrupts It's helpful for a driver to put the pci slot name in its interrupt names, so /proc/interrupts will show the pci slot of the device. Signed-off-by: Sagi Grimberg Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx5/main.c | 6 +++--- drivers/net/ethernet/mellanox/mlx5/core/eq.c | 4 +++- 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index b267c65261c0..b1a6cb3a2809 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -164,6 +164,7 @@ int mlx5_vector2eqn(struct mlx5_ib_dev *dev, int vector, int *eqn, int *irqn) static int alloc_comp_eqs(struct mlx5_ib_dev *dev) { struct mlx5_eq_table *table = &dev->mdev.priv.eq_table; + char name[MLX5_MAX_EQ_NAME]; struct mlx5_eq *eq, *n; int ncomp_vec; int nent; @@ -180,11 +181,10 @@ static int alloc_comp_eqs(struct mlx5_ib_dev *dev) goto clean; } - snprintf(eq->name, MLX5_MAX_EQ_NAME, "mlx5_comp%d", i); + snprintf(name, MLX5_MAX_EQ_NAME, "mlx5_comp%d", i); err = mlx5_create_map_eq(&dev->mdev, eq, i + MLX5_EQ_VEC_COMP_BASE, nent, 0, - eq->name, - &dev->mdev.priv.uuari.uars[0]); + name, &dev->mdev.priv.uuari.uars[0]); if (err) { kfree(eq); goto clean; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eq.c b/drivers/net/ethernet/mellanox/mlx5/core/eq.c index 443cc4d7b024..2231d93cc7ad 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eq.c @@ -366,9 +366,11 @@ int mlx5_create_map_eq(struct mlx5_core_dev *dev, struct mlx5_eq *eq, u8 vecidx, goto err_in; } + snprintf(eq->name, MLX5_MAX_EQ_NAME, "%s@pci:%s", + name, pci_name(dev->pdev)); eq->eqn = out.eq_number; err = request_irq(table->msix_arr[vecidx].vector, mlx5_msix_handler, 0, - name, eq); + eq->name, eq); if (err) goto err_eq; -- cgit v1.2.3 From fe45f8270436103c305645a6d9d86a9141b9fe09 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 11 Sep 2013 16:35:35 +0300 Subject: IB/mlx5: Fix alignment of reg umr gather buffers The hardware requires that gather buffers for UMR work requests be aligned to 2K. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx5/mr.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c index 06e33e6cb07f..154241290f5c 100644 --- a/drivers/infiniband/hw/mlx5/mr.c +++ b/drivers/infiniband/hw/mlx5/mr.c @@ -42,6 +42,10 @@ enum { DEF_CACHE_SIZE = 10, }; +enum { + MLX5_UMR_ALIGN = 2048 +}; + static __be64 *mr_align(__be64 *ptr, int align) { unsigned long mask = align - 1; @@ -671,12 +675,12 @@ static struct mlx5_ib_mr *reg_umr(struct ib_pd *pd, struct ib_umem *umem, if (!mr) return ERR_PTR(-EAGAIN); - mr->pas = kmalloc(size + 0x3f, GFP_KERNEL); + mr->pas = kmalloc(size + MLX5_UMR_ALIGN - 1, GFP_KERNEL); if (!mr->pas) { err = -ENOMEM; goto error; } - mr->dma = dma_map_single(ddev, mr_align(mr->pas, 0x40), size, + mr->dma = dma_map_single(ddev, mr_align(mr->pas, MLX5_UMR_ALIGN), size, DMA_TO_DEVICE); if (dma_mapping_error(ddev, mr->dma)) { kfree(mr->pas); @@ -684,7 +688,8 @@ static struct mlx5_ib_mr *reg_umr(struct ib_pd *pd, struct ib_umem *umem, goto error; } - mlx5_ib_populate_pas(dev, umem, page_shift, mr_align(mr->pas, 0x40), 1); + mlx5_ib_populate_pas(dev, umem, page_shift, + mr_align(mr->pas, MLX5_UMR_ALIGN), 1); memset(&wr, 0, sizeof(wr)); wr.wr_id = (u64)(unsigned long)mr; -- cgit v1.2.3 From 54313907077ff4cf9a6d82d313afe8ac6cbdaff1 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 11 Sep 2013 16:35:36 +0300 Subject: IB/mlx5: Ensure proper synchronization accessing memory Call mlx5_ib_populate_pas() before mapping the DMA buffer to ensure the hardware reads the values written by the CPU. Found by: Haggai Eran Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx5/mr.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c index 154241290f5c..3453580b1eb2 100644 --- a/drivers/infiniband/hw/mlx5/mr.c +++ b/drivers/infiniband/hw/mlx5/mr.c @@ -680,6 +680,10 @@ static struct mlx5_ib_mr *reg_umr(struct ib_pd *pd, struct ib_umem *umem, err = -ENOMEM; goto error; } + + mlx5_ib_populate_pas(dev, umem, page_shift, + mr_align(mr->pas, MLX5_UMR_ALIGN), 1); + mr->dma = dma_map_single(ddev, mr_align(mr->pas, MLX5_UMR_ALIGN), size, DMA_TO_DEVICE); if (dma_mapping_error(ddev, mr->dma)) { @@ -688,9 +692,6 @@ static struct mlx5_ib_mr *reg_umr(struct ib_pd *pd, struct ib_umem *umem, goto error; } - mlx5_ib_populate_pas(dev, umem, page_shift, - mr_align(mr->pas, MLX5_UMR_ALIGN), 1); - memset(&wr, 0, sizeof(wr)); wr.wr_id = (u64)(unsigned long)mr; prep_umr_reg_wqe(pd, &wr, &sg, mr->dma, npages, mr->mmr.key, page_shift, virt_addr, len, access_flags); -- cgit v1.2.3 From 61875f30daf60305712e25b209ef41ced2635bad Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 21 Sep 2013 13:58:22 -0400 Subject: random: allow architectures to optionally define random_get_entropy() Allow architectures which have a disabled get_cycles() function to provide a random_get_entropy() function which provides a fine-grained, rapidly changing counter that can be used by the /dev/random driver. For example, an architecture might have a rapidly changing register used to control random TLB cache eviction, or DRAM refresh that doesn't meet the requirements of get_cycles(), but which is good enough for the needs of the random driver. Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org --- drivers/char/random.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/char/random.c b/drivers/char/random.c index 92e6c67e1ae6..2d5daf9b58e9 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -643,7 +643,7 @@ struct timer_rand_state { */ void add_device_randomness(const void *buf, unsigned int size) { - unsigned long time = get_cycles() ^ jiffies; + unsigned long time = random_get_entropy() ^ jiffies; mix_pool_bytes(&input_pool, buf, size, NULL); mix_pool_bytes(&input_pool, &time, sizeof(time), NULL); @@ -680,7 +680,7 @@ static void add_timer_randomness(struct timer_rand_state *state, unsigned num) goto out; sample.jiffies = jiffies; - sample.cycles = get_cycles(); + sample.cycles = random_get_entropy(); sample.num = num; mix_pool_bytes(&input_pool, &sample, sizeof(sample), NULL); @@ -747,7 +747,7 @@ void add_interrupt_randomness(int irq, int irq_flags) struct fast_pool *fast_pool = &__get_cpu_var(irq_randomness); struct pt_regs *regs = get_irq_regs(); unsigned long now = jiffies; - __u32 input[4], cycles = get_cycles(); + __u32 input[4], cycles = random_get_entropy(); input[0] = cycles ^ jiffies; input[1] = irq; @@ -1485,7 +1485,7 @@ unsigned int get_random_int(void) hash = get_cpu_var(get_random_int_hash); - hash[0] += current->pid + jiffies + get_cycles(); + hash[0] += current->pid + jiffies + random_get_entropy(); md5_transform(hash, random_int_secret); ret = hash[0]; put_cpu_var(get_random_int_hash); -- cgit v1.2.3 From 0821f20d49d19f49e53b05ef6727e010c4b1f11d Mon Sep 17 00:00:00 2001 From: "Mingarelli, Thomas" Date: Fri, 9 Aug 2013 16:31:09 +0000 Subject: watchdog: hpwdt: Patch to ignore auxilary iLO devices This patch is to prevent hpwdt from loading on any auxilary iLO devices defined after the initial (or main) iLO device. All auxilary iLO devices will have a subsystem device ID set to 0x1979 in order for hpwdt to differentiate between the two types. Signed-off-by: Thomas Mingarelli Tested-by: Lisa Mitchell Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/hpwdt.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 5be5e3d14f79..19f3c3fc65f4 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -802,6 +802,12 @@ static int hpwdt_init_one(struct pci_dev *dev, return -ENODEV; } + /* + * Ignore all auxilary iLO devices with the following PCI ID + */ + if (dev->subsystem_device == 0x1979) + return -ENODEV; + if (pci_enable_device(dev)) { dev_warn(&dev->dev, "Not possible to enable PCI Device: 0x%x:0x%x.\n", -- cgit v1.2.3 From 2fe80d3bbf1c8bd9efc5b8154207c8dd104e7306 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Thu, 10 Oct 2013 17:31:15 -0700 Subject: bcache: Fix a null ptr deref regression Commit c0f04d88e46d ("bcache: Fix flushes in writeback mode") was fixing a reported data corruption bug, but it seems some last minute refactoring or rebasing introduced a null pointer deref. Signed-off-by: Kent Overstreet Cc: linux-stable # >= v3.10 Reported-by: Gabriel de Perthuis Signed-off-by: Linus Torvalds --- drivers/md/bcache/request.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/bcache/request.c b/drivers/md/bcache/request.c index 71eb233b9ace..b6a74bcbb08f 100644 --- a/drivers/md/bcache/request.c +++ b/drivers/md/bcache/request.c @@ -996,6 +996,7 @@ static void request_write(struct cached_dev *dc, struct search *s) closure_bio_submit(bio, cl, s->d); } else { bch_writeback_add(dc); + s->op.cache_bio = bio; if (bio->bi_rw & REQ_FLUSH) { /* Also need to send a flush to the backing device */ @@ -1008,8 +1009,6 @@ static void request_write(struct cached_dev *dc, struct search *s) flush->bi_private = cl; closure_bio_submit(flush, cl, s->d); - } else { - s->op.cache_bio = bio; } } out: -- cgit v1.2.3 From cdeb5c033f0389c44e5b36cafd623bdf44bbe25c Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 26 Sep 2013 02:28:37 +0400 Subject: rcar-hpbdma: remove shdma_free_irq() calls Commit c1c63a14f4f2419d093acd7164eccdff315baa86 (DMA: shdma: switch to managed resource allocation) got rid of shdma_free_irq() but unfortunately got merged later than commit c4f6c41ba790bbbfcebb4c47a709ac8ff1fe1af9 (dma: add driver for R-Car HPB-DMAC), so that the HPB-DMAC driver retained the calls and got broken: drivers/dma/sh/rcar-hpbdma.c: In function `hpb_dmae_alloc_chan_resources': drivers/dma/sh/rcar-hpbdma.c:435: error: implicit declaration of function `shdma_free_irq' Fix this compilation error by removing the remaining shdma_free_irq() calls. Reported-by: Simon Horman Signed-off-by: Sergei Shtylyov Tested-by: Simon Horman Signed-off-by: Vinod Koul --- drivers/dma/sh/rcar-hpbdma.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/sh/rcar-hpbdma.c b/drivers/dma/sh/rcar-hpbdma.c index 45a520281ce1..b2f50d8bd755 100644 --- a/drivers/dma/sh/rcar-hpbdma.c +++ b/drivers/dma/sh/rcar-hpbdma.c @@ -432,7 +432,6 @@ hpb_dmae_alloc_chan_resources(struct hpb_dmae_chan *hpb_chan, hpb_chan->xfer_mode = XFER_DOUBLE; } else { dev_err(hpb_chan->shdma_chan.dev, "DCR setting error"); - shdma_free_irq(&hpb_chan->shdma_chan); return -EINVAL; } @@ -614,7 +613,6 @@ static void hpb_dmae_chan_remove(struct hpb_dmae_device *hpbdev) shdma_for_each_chan(schan, &hpbdev->shdma_dev, i) { BUG_ON(!schan); - shdma_free_irq(schan); shdma_chan_remove(schan); } dma_dev->chancnt = 0; -- cgit v1.2.3 From 08d08bcdee30d3a28426bd60dfbdae44b36250bc Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 26 Sep 2013 02:31:37 +0400 Subject: rcar-hpbdma: add parameter to set_slave() method Commit 4981c4dc194efb18f0e9a02f1b43e926f2f0d2bb (DMA: shdma: switch DT mode to use configuration data from a match table) added a new parameter to set_slave() method but unfortunately got merged later than commit c4f6c41ba790bbbfcebb4c47a (dma: add driver for R-Car HPB-DMAC), so that the HPB-DMAC driver retained the old prototype which caused this warning: drivers/dma/sh/rcar-hpbdma.c:485: warning: initialization from incompatible pointer type The newly added parameter is used to override DMA slave address from 'struct hpb_dmae_slave_config', so we have to add the 'slave_addr' field to 'struct hpb_dmae_chan', conditionally assign it in set_slave() method, and return in slave_addr() method. Signed-off-by: Sergei Shtylyov Tested-by: Simon Horman Signed-off-by: Vinod Koul --- drivers/dma/sh/rcar-hpbdma.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/sh/rcar-hpbdma.c b/drivers/dma/sh/rcar-hpbdma.c index b2f50d8bd755..ebad84591a6e 100644 --- a/drivers/dma/sh/rcar-hpbdma.c +++ b/drivers/dma/sh/rcar-hpbdma.c @@ -93,6 +93,7 @@ struct hpb_dmae_chan { void __iomem *base; const struct hpb_dmae_slave_config *cfg; char dev_id[16]; /* unique name per DMAC of channel */ + dma_addr_t slave_addr; }; struct hpb_dmae_device { @@ -445,7 +446,8 @@ hpb_dmae_alloc_chan_resources(struct hpb_dmae_chan *hpb_chan, return 0; } -static int hpb_dmae_set_slave(struct shdma_chan *schan, int slave_id, bool try) +static int hpb_dmae_set_slave(struct shdma_chan *schan, int slave_id, + dma_addr_t slave_addr, bool try) { struct hpb_dmae_chan *chan = to_chan(schan); const struct hpb_dmae_slave_config *sc = @@ -456,6 +458,7 @@ static int hpb_dmae_set_slave(struct shdma_chan *schan, int slave_id, bool try) if (try) return 0; chan->cfg = sc; + chan->slave_addr = slave_addr ? : sc->addr; return hpb_dmae_alloc_chan_resources(chan, sc); } @@ -467,7 +470,7 @@ static dma_addr_t hpb_dmae_slave_addr(struct shdma_chan *schan) { struct hpb_dmae_chan *chan = to_chan(schan); - return chan->cfg->addr; + return chan->slave_addr; } static struct shdma_desc *hpb_dmae_embedded_desc(void *buf, int i) -- cgit v1.2.3 From 2f6d8fad0a1636e675308088c35e863d066e0949 Mon Sep 17 00:00:00 2001 From: "Geyslan G. Bem" Date: Mon, 7 Oct 2013 19:19:58 -0300 Subject: dma: edma.c: remove edma_desc leakage Free memory allocated to edma_desc when failing to allocate slot. Signed-off-by: Geyslan G. Bem Signed-off-by: Vinod Koul --- drivers/dma/edma.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c index 098a8da450f0..3519111c566b 100644 --- a/drivers/dma/edma.c +++ b/drivers/dma/edma.c @@ -306,6 +306,7 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg( EDMA_SLOT_ANY); if (echan->slot[i] < 0) { dev_err(dev, "Failed to allocate slot\n"); + kfree(edesc); return NULL; } } -- cgit v1.2.3 From e1264ebe9ff48e1b3e1dd11805eec9f5b143ab7c Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 11 Oct 2013 15:11:52 +1000 Subject: Revert "drm/i915: Delay disabling of VGA memory until vgacon->fbcon handoff is done" This reverts commit 6e1b4fdad5157bb9e88777d525704aba24389bee. This is part of a revert due to a userspace breakage, better explained in the revert of 1a1a4cbf4906a13c0c377f708df5d94168e7b582. Signed-off-by: Daniel Vetter Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_dma.c | 6 ------ drivers/gpu/drm/i915/intel_display.c | 27 +++++++++++---------------- drivers/gpu/drm/i915/intel_drv.h | 1 - 3 files changed, 11 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index c27a21034a5e..52f5ad8037cc 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1351,12 +1351,6 @@ static int i915_load_modeset_init(struct drm_device *dev) */ intel_fbdev_initial_config(dev); - /* - * Must do this after fbcon init so that - * vgacon_save_screen() works during the handover. - */ - i915_disable_vga_mem(dev); - /* Only enable hotplug handling once the fbdev is fully set up. */ dev_priv->enable_hotplug_processing = true; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index c89abd33124f..aaea3ec811ed 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -10038,6 +10038,15 @@ static void i915_disable_vga(struct drm_device *dev) outb(SR01, VGA_SR_INDEX); sr1 = inb(VGA_SR_DATA); outb(sr1 | 1<<5, VGA_SR_DATA); + + /* Disable VGA memory on Intel HD */ + if (HAS_PCH_SPLIT(dev)) { + outb(inb(VGA_MSR_READ) & ~VGA_MSR_MEM_EN, VGA_MSR_WRITE); + vga_set_legacy_decoding(dev->pdev, VGA_RSRC_LEGACY_IO | + VGA_RSRC_NORMAL_IO | + VGA_RSRC_NORMAL_MEM); + } + vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); udelay(300); @@ -10045,7 +10054,7 @@ static void i915_disable_vga(struct drm_device *dev) POSTING_READ(vga_reg); } -static void i915_enable_vga_mem(struct drm_device *dev) +static void i915_enable_vga(struct drm_device *dev) { /* Enable VGA memory on Intel HD */ if (HAS_PCH_SPLIT(dev)) { @@ -10059,19 +10068,6 @@ static void i915_enable_vga_mem(struct drm_device *dev) } } -void i915_disable_vga_mem(struct drm_device *dev) -{ - /* Disable VGA memory on Intel HD */ - if (HAS_PCH_SPLIT(dev)) { - vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO); - outb(inb(VGA_MSR_READ) & ~VGA_MSR_MEM_EN, VGA_MSR_WRITE); - vga_set_legacy_decoding(dev->pdev, VGA_RSRC_LEGACY_IO | - VGA_RSRC_NORMAL_IO | - VGA_RSRC_NORMAL_MEM); - vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); - } -} - void intel_modeset_init_hw(struct drm_device *dev) { intel_init_power_well(dev); @@ -10350,7 +10346,6 @@ void i915_redisable_vga(struct drm_device *dev) if (I915_READ(vga_reg) != VGA_DISP_DISABLE) { DRM_DEBUG_KMS("Something enabled VGA plane, disabling it\n"); i915_disable_vga(dev); - i915_disable_vga_mem(dev); } } @@ -10564,7 +10559,7 @@ void intel_modeset_cleanup(struct drm_device *dev) intel_disable_fbc(dev); - i915_enable_vga_mem(dev); + i915_enable_vga(dev); intel_disable_gt_powersave(dev); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 28cae80495e2..9b7b68fd5d47 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -793,6 +793,5 @@ extern void hsw_pc8_disable_interrupts(struct drm_device *dev); extern void hsw_pc8_restore_interrupts(struct drm_device *dev); extern void intel_aux_display_runtime_get(struct drm_i915_private *dev_priv); extern void intel_aux_display_runtime_put(struct drm_i915_private *dev_priv); -extern void i915_disable_vga_mem(struct drm_device *dev); #endif /* __INTEL_DRV_H__ */ -- cgit v1.2.3 From ebff5fa9d545574324095d9c6a3cb80c9157abc5 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 11 Oct 2013 15:12:04 +1000 Subject: Revert "i915: Update VGA arbiter support for newer devices" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 81b5c7bc8de3e6f63419139c2fc91bf81dea8a7d. Adding drm/i915 into the vga arbiter chain means that X (in a piece of well-meant paranoia) will do a get/put on the vga decoding around _every_ accel call down into the ddx. Which results in some nice performance disasters [1]. This really breaks userspace, by disabling DRI for everyone, and stops OpenGL from working, this isn't limited to just the i915 but both the integrated and discrete GPUs on multi-gpu systems, in other words this causes untold worlds of pain, Ville tried to come up with a Great Hack to fiddle the required VGA I/O ops behind everyone's back using stop_machine, but that didn't really work out [2]. Given that we're fairly late in the -rc stage for such games let's just revert this all. One thing we might want to keep is to delay the disabling of the vga decoding until the fbdev emulation and the fbcon screen is set up. If we kill vga mem decoding beforehand fbcon can end up with a white square in the top-left corner it tried to save from the vga memory for a seamless transition. And we have bug reports on older platforms which seem to match these symptoms. But again that's something to play around with in -next. References: [1] http://lists.x.org/archives/xorg-devel/2013-September/037763.html References: [2] http://www.spinics.net/lists/intel-gfx/msg34062.html Cc: Alex Williamson Cc: Ville Syrjälä Cc: Chris Wilson Signed-off-by: Daniel Vetter Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_dma.c | 9 +++------ drivers/gpu/drm/i915/intel_display.c | 25 ------------------------- 2 files changed, 3 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 52f5ad8037cc..d5c784d48671 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1290,12 +1290,9 @@ static int i915_load_modeset_init(struct drm_device *dev) * then we do not take part in VGA arbitration and the * vga_client_register() fails with -ENODEV. */ - if (!HAS_PCH_SPLIT(dev)) { - ret = vga_client_register(dev->pdev, dev, NULL, - i915_vga_set_decode); - if (ret && ret != -ENODEV) - goto out; - } + ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode); + if (ret && ret != -ENODEV) + goto out; intel_register_dsm_handler(); diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index aaea3ec811ed..581fb4b2f766 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -10038,15 +10038,6 @@ static void i915_disable_vga(struct drm_device *dev) outb(SR01, VGA_SR_INDEX); sr1 = inb(VGA_SR_DATA); outb(sr1 | 1<<5, VGA_SR_DATA); - - /* Disable VGA memory on Intel HD */ - if (HAS_PCH_SPLIT(dev)) { - outb(inb(VGA_MSR_READ) & ~VGA_MSR_MEM_EN, VGA_MSR_WRITE); - vga_set_legacy_decoding(dev->pdev, VGA_RSRC_LEGACY_IO | - VGA_RSRC_NORMAL_IO | - VGA_RSRC_NORMAL_MEM); - } - vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); udelay(300); @@ -10054,20 +10045,6 @@ static void i915_disable_vga(struct drm_device *dev) POSTING_READ(vga_reg); } -static void i915_enable_vga(struct drm_device *dev) -{ - /* Enable VGA memory on Intel HD */ - if (HAS_PCH_SPLIT(dev)) { - vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO); - outb(inb(VGA_MSR_READ) | VGA_MSR_MEM_EN, VGA_MSR_WRITE); - vga_set_legacy_decoding(dev->pdev, VGA_RSRC_LEGACY_IO | - VGA_RSRC_LEGACY_MEM | - VGA_RSRC_NORMAL_IO | - VGA_RSRC_NORMAL_MEM); - vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); - } -} - void intel_modeset_init_hw(struct drm_device *dev) { intel_init_power_well(dev); @@ -10559,8 +10536,6 @@ void intel_modeset_cleanup(struct drm_device *dev) intel_disable_fbc(dev); - i915_enable_vga(dev); - intel_disable_gt_powersave(dev); ironlake_teardown_rc6(dev); -- cgit v1.2.3 From 03d152d5582abc8a1c19cb107164c3724bbd4be4 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 1 Oct 2013 17:35:43 +0300 Subject: gpio/lynxpoint: check if the interrupt is enabled in IRQ handler Checking LP_INT_STAT is not enough in the interrupt handler because its contents get updated regardless of whether the pin has interrupt enabled or not. This causes the driver to loop forever for GPIOs that are pulled up. Fix this by checking the interrupt enable bit for the pin as well. Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg Acked-by: Mathias Nyman Signed-off-by: Linus Walleij --- drivers/gpio/gpio-lynxpoint.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-lynxpoint.c b/drivers/gpio/gpio-lynxpoint.c index 2d9ca6055e5e..41b5913ddabe 100644 --- a/drivers/gpio/gpio-lynxpoint.c +++ b/drivers/gpio/gpio-lynxpoint.c @@ -248,14 +248,15 @@ static void lp_gpio_irq_handler(unsigned irq, struct irq_desc *desc) struct lp_gpio *lg = irq_data_get_irq_handler_data(data); struct irq_chip *chip = irq_data_get_irq_chip(data); u32 base, pin, mask; - unsigned long reg, pending; + unsigned long reg, ena, pending; unsigned virq; /* check from GPIO controller which pin triggered the interrupt */ for (base = 0; base < lg->chip.ngpio; base += 32) { reg = lp_gpio_reg(&lg->chip, base, LP_INT_STAT); + ena = lp_gpio_reg(&lg->chip, base, LP_INT_ENABLE); - while ((pending = inl(reg))) { + while ((pending = (inl(reg) & inl(ena)))) { pin = __ffs(pending); mask = BIT(pin); /* Clear before handling so we don't lose an edge */ -- cgit v1.2.3 From aaf3d29fe8c888f3fc1b5e00d66085fe4e06e4cb Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 10 Oct 2013 23:25:58 +0200 Subject: ACPI / PM / Documentation: Replace outdated project links and addresses Some links to projects web pages and e-mail addresses in ACPI/PM documentation and Kconfig are outdated, so update them. Signed-off-by: Rafael J. Wysocki --- drivers/acpi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 22327e6a7236..5ea5c32609ac 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -24,7 +24,7 @@ menuconfig ACPI are configured, ACPI is used. The project home page for the Linux ACPI subsystem is here: - + Linux support for ACPI is based on Intel Corporation's ACPI Component Architecture (ACPI CA). For more information on the -- cgit v1.2.3 From 8c0fca8153224822121c85a64d6401903b9e4690 Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Fri, 4 Oct 2013 10:59:57 -0700 Subject: gpiolib: safer implementation of desc_to_gpio() The current implementation of desc_to_gpio() relies on the chip pointer to be set to a valid value in order to compute the GPIO number. This was done in the hope that we can get rid of the gpio_desc global array, but this is not happening anytime soon. This patch reimplements desc_to_gpio() in a fashion similar to that of gpio_to_desc(). As a result, desc_to_gpio(gpio_to_desc(gpio)) == gpio is now always true. This allows to call desc_to_gpio() on non-initialized descriptors as some error-handling code currently does. Signed-off-by: Alexandre Courbot Reported-by: Dr. H. Nikolaus Schaller Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 86ef3461ec06..f33063114d56 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -136,7 +136,7 @@ static struct gpio_desc *gpio_to_desc(unsigned gpio) */ static int desc_to_gpio(const struct gpio_desc *desc) { - return desc->chip->base + gpio_chip_hwgpio(desc); + return desc - &gpio_desc[0]; } -- cgit v1.2.3 From 0204df470d6db830f0f2f5654ec582be84d81588 Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Fri, 4 Oct 2013 10:59:58 -0700 Subject: gpiolib: let gpiod_request() return -EPROBE_DEFER Patch be1a4b brought some improvements to the GPIO error handling code, but also changed the return value of gpiod_request() when called on a not yet initialized GPIO descriptor: it now returns -EINVAL instead of -EPROBE_DEFER, and this affects some drivers. This patch restores the original behavior for gpiod_request(). It is safe to do so now that desc_to_gpio() does not rely on the GPIO descriptor to be initialized. Other functions changed by patch be1a4b do not see their return value affected, so these are not reverted. Signed-off-by: Alexandre Courbot Reported-by: Dr. H. Nikolaus Schaller Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index f33063114d56..0dee0e0c247a 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1398,7 +1398,7 @@ static int gpiod_request(struct gpio_desc *desc, const char *label) int status = -EPROBE_DEFER; unsigned long flags; - if (!desc || !desc->chip) { + if (!desc) { pr_warn("%s: invalid GPIO\n", __func__); return -EINVAL; } @@ -1406,6 +1406,8 @@ static int gpiod_request(struct gpio_desc *desc, const char *label) spin_lock_irqsave(&gpio_lock, flags); chip = desc->chip; + if (chip == NULL) + goto done; if (!try_module_get(chip->owner)) goto done; -- cgit v1.2.3 From 001dd84a92a25f8f2bad7d26df8bdb0362302c07 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 11 Oct 2013 10:38:13 +0200 Subject: usb: musb: start musb on the udc side, too I have am335x-evm with one port running in OTG mode. Since commit fe4cb09 ("usb: musb: gadget: remove hcd initialization") the loaded gadget does non pop up on the host. All I see is |usb 4-5: new high-speed USB device number 52 using ehci-pci |usb 4-5: device descriptor read/64, error -110 Since a later commit 2cc65fe ("usb: musb: add musb_host_setup() and musb_host_cleanup()) the gadget shows up on the host again but only in OTG mode (because we have the host init code running). It does not work in device only mode. If running in OTG mode and the gadget is removed and added back (rmmod followed by modprobe of a gadget) then the same error is pops up on the host side. This patch ensures that the gadget side also executes musb_start() which puts the chip in "connect accept" mode. With this change the device works in OTG & device mode and the gadget can be added & removed multiple times. A device (if musb is in OTG mode acting as a host) is only recognized if it is attached during module load (musb_hdrc module). After the device unplugged and plugged again the host does not recognize it. We get a buch of errors if musb running in OTG mode, attached to a host and no gadget is loaded. Bah. This is one step forward. Host & device only mode should work. I will look at OTG later. I looked at this before commit fe4cb09 and OTG wasn't working there perfectly so I am not sure that it is a regression :) Cc: # v3.11 Cc: Daniel Mack Cc: Peter Korsgaard Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.c | 46 +++++++++++++++++++++++++++++++++++++++++ drivers/usb/musb/musb_core.h | 1 + drivers/usb/musb/musb_gadget.c | 2 ++ drivers/usb/musb/musb_virthub.c | 46 ----------------------------------------- 4 files changed, 49 insertions(+), 46 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 18e877ffe7b7..cd70cc886171 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -921,6 +921,52 @@ static void musb_generic_disable(struct musb *musb) } +/* + * Program the HDRC to start (enable interrupts, dma, etc.). + */ +void musb_start(struct musb *musb) +{ + void __iomem *regs = musb->mregs; + u8 devctl = musb_readb(regs, MUSB_DEVCTL); + + dev_dbg(musb->controller, "<== devctl %02x\n", devctl); + + /* Set INT enable registers, enable interrupts */ + musb->intrtxe = musb->epmask; + musb_writew(regs, MUSB_INTRTXE, musb->intrtxe); + musb->intrrxe = musb->epmask & 0xfffe; + musb_writew(regs, MUSB_INTRRXE, musb->intrrxe); + musb_writeb(regs, MUSB_INTRUSBE, 0xf7); + + musb_writeb(regs, MUSB_TESTMODE, 0); + + /* put into basic highspeed mode and start session */ + musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE + | MUSB_POWER_HSENAB + /* ENSUSPEND wedges tusb */ + /* | MUSB_POWER_ENSUSPEND */ + ); + + musb->is_active = 0; + devctl = musb_readb(regs, MUSB_DEVCTL); + devctl &= ~MUSB_DEVCTL_SESSION; + + /* session started after: + * (a) ID-grounded irq, host mode; + * (b) vbus present/connect IRQ, peripheral mode; + * (c) peripheral initiates, using SRP + */ + if (musb->port_mode != MUSB_PORT_MODE_HOST && + (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) { + musb->is_active = 1; + } else { + devctl |= MUSB_DEVCTL_SESSION; + } + + musb_platform_enable(musb); + musb_writeb(regs, MUSB_DEVCTL, devctl); +} + /* * Make the HDRC stop (disable interrupts, etc.); * reversible by musb_start diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 65f3917b4fc5..1c5bf75ee8ff 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -503,6 +503,7 @@ static inline void musb_configure_ep0(struct musb *musb) extern const char musb_driver_name[]; extern void musb_stop(struct musb *musb); +extern void musb_start(struct musb *musb); extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src); extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst); diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index b19ed213ab85..07bf4dfddeaa 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1858,6 +1858,8 @@ static int musb_gadget_start(struct usb_gadget *g, musb->xceiv->state = OTG_STATE_B_IDLE; spin_unlock_irqrestore(&musb->lock, flags); + musb_start(musb); + /* REVISIT: funcall to other code, which also * handles power budgeting ... this way also * ensures HdrcStart is indirectly called. diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index a523950c2b32..d1d6b83aabca 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -44,52 +44,6 @@ #include "musb_core.h" -/* -* Program the HDRC to start (enable interrupts, dma, etc.). -*/ -static void musb_start(struct musb *musb) -{ - void __iomem *regs = musb->mregs; - u8 devctl = musb_readb(regs, MUSB_DEVCTL); - - dev_dbg(musb->controller, "<== devctl %02x\n", devctl); - - /* Set INT enable registers, enable interrupts */ - musb->intrtxe = musb->epmask; - musb_writew(regs, MUSB_INTRTXE, musb->intrtxe); - musb->intrrxe = musb->epmask & 0xfffe; - musb_writew(regs, MUSB_INTRRXE, musb->intrrxe); - musb_writeb(regs, MUSB_INTRUSBE, 0xf7); - - musb_writeb(regs, MUSB_TESTMODE, 0); - - /* put into basic highspeed mode and start session */ - musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE - | MUSB_POWER_HSENAB - /* ENSUSPEND wedges tusb */ - /* | MUSB_POWER_ENSUSPEND */ - ); - - musb->is_active = 0; - devctl = musb_readb(regs, MUSB_DEVCTL); - devctl &= ~MUSB_DEVCTL_SESSION; - - /* session started after: - * (a) ID-grounded irq, host mode; - * (b) vbus present/connect IRQ, peripheral mode; - * (c) peripheral initiates, using SRP - */ - if (musb->port_mode != MUSB_PORT_MODE_HOST && - (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) { - musb->is_active = 1; - } else { - devctl |= MUSB_DEVCTL_SESSION; - } - - musb_platform_enable(musb); - musb_writeb(regs, MUSB_DEVCTL, devctl); -} - static void musb_port_suspend(struct musb *musb, bool do_suspend) { struct usb_otg *otg = musb->xceiv->otg; -- cgit v1.2.3 From d93b3ac0edb85b1c1e8fe0a065c1e5045783e2f6 Mon Sep 17 00:00:00 2001 From: Antonios Motakis Date: Fri, 11 Oct 2013 10:40:46 -0600 Subject: VFIO: vfio_iommu_type1: fix bug caused by break in nested loop In vfio_iommu_type1.c there is a bug in vfio_dma_do_map, when checking that pages are not already mapped. Since the check is being done in a for loop nested within the main loop, breaking out of it does not create the intended behavior. If the underlying IOMMU driver returns a non-NULL value, this will be ignored and mapping the DMA range will be attempted anyway, leading to unpredictable behavior. This interracts badly with the ARM SMMU driver issue fixed in the patch that was submitted with the title: "[PATCH 2/2] ARM: SMMU: return NULL on error in arm_smmu_iova_to_phys" Both fixes are required in order to use the vfio_iommu_type1 driver with an ARM SMMU. This patch refactors the function slightly, in order to also make this kind of bug less likely. Signed-off-by: Antonios Motakis Signed-off-by: Alex Williamson --- drivers/vfio/vfio_iommu_type1.c | 40 +++++++++++++++++++++------------------- 1 file changed, 21 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c index a9807dea3887..4fb7a8f83c8a 100644 --- a/drivers/vfio/vfio_iommu_type1.c +++ b/drivers/vfio/vfio_iommu_type1.c @@ -545,6 +545,8 @@ static int vfio_dma_do_map(struct vfio_iommu *iommu, long npage; int ret = 0, prot = 0; uint64_t mask; + struct vfio_dma *dma = NULL; + unsigned long pfn; end = map->iova + map->size; @@ -587,8 +589,6 @@ static int vfio_dma_do_map(struct vfio_iommu *iommu, } for (iova = map->iova; iova < end; iova += size, vaddr += size) { - struct vfio_dma *dma = NULL; - unsigned long pfn; long i; /* Pin a contiguous chunk of memory */ @@ -597,16 +597,15 @@ static int vfio_dma_do_map(struct vfio_iommu *iommu, if (npage <= 0) { WARN_ON(!npage); ret = (int)npage; - break; + goto out; } /* Verify pages are not already mapped */ for (i = 0; i < npage; i++) { if (iommu_iova_to_phys(iommu->domain, iova + (i << PAGE_SHIFT))) { - vfio_unpin_pages(pfn, npage, prot, true); ret = -EBUSY; - break; + goto out_unpin; } } @@ -616,8 +615,7 @@ static int vfio_dma_do_map(struct vfio_iommu *iommu, if (ret) { if (ret != -EBUSY || map_try_harder(iommu, iova, pfn, npage, prot)) { - vfio_unpin_pages(pfn, npage, prot, true); - break; + goto out_unpin; } } @@ -672,9 +670,8 @@ static int vfio_dma_do_map(struct vfio_iommu *iommu, dma = kzalloc(sizeof(*dma), GFP_KERNEL); if (!dma) { iommu_unmap(iommu->domain, iova, size); - vfio_unpin_pages(pfn, npage, prot, true); ret = -ENOMEM; - break; + goto out_unpin; } dma->size = size; @@ -685,16 +682,21 @@ static int vfio_dma_do_map(struct vfio_iommu *iommu, } } - if (ret) { - struct vfio_dma *tmp; - iova = map->iova; - size = map->size; - while ((tmp = vfio_find_dma(iommu, iova, size))) { - int r = vfio_remove_dma_overlap(iommu, iova, - &size, tmp); - if (WARN_ON(r || !size)) - break; - } + WARN_ON(ret); + mutex_unlock(&iommu->lock); + return ret; + +out_unpin: + vfio_unpin_pages(pfn, npage, prot, true); + +out: + iova = map->iova; + size = map->size; + while ((dma = vfio_find_dma(iommu, iova, size))) { + int r = vfio_remove_dma_overlap(iommu, iova, + &size, dma); + if (WARN_ON(r || !size)) + break; } mutex_unlock(&iommu->lock); -- cgit v1.2.3 From d544db293a44a2a3b09feab7dbd59668b692de71 Mon Sep 17 00:00:00 2001 From: "Fangxiaozhi (Franko)" Date: Fri, 11 Oct 2013 03:48:21 +0000 Subject: USB: support new huawei devices in option.c Add new supporting declarations to option.c, to support Huawei new devices with new bInterfaceSubClass value. Signed-off-by: fangxiaozhi Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 216 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 216 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 80a7104d5ddb..74c64b900b85 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -689,6 +689,222 @@ static const struct usb_device_id option_ids[] = { { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7A) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7B) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x02) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x03) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x04) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x06) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x10) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x12) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x13) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x14) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x15) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x17) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x18) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x19) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x1A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x1B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x1C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x31) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x32) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x33) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x34) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x35) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x36) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x48) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x49) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x4A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x4B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x4C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x61) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x62) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x63) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x64) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x65) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x66) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x78) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x79) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x7A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x7B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x7C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x02) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x03) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x04) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x06) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x10) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x12) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x13) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x14) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x15) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x17) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x18) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x19) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x1A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x1B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x1C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x31) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x32) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x33) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x34) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x35) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x36) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x48) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x49) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x4A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x4B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x4C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x61) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x62) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x63) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x64) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x65) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x66) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x78) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x79) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x7A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x7B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x7C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x02) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x03) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x04) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x06) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x10) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x12) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x13) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x14) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x15) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x17) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x18) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x19) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x1A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x1B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x1C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x31) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x32) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x33) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x34) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x35) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x36) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x48) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x49) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x4A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x4B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x4C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x61) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x62) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x63) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x64) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x65) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x66) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x78) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x79) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x7A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x7B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x7C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x02) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x03) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x04) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x06) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x10) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x12) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x13) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x14) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x15) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x17) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x18) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x19) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x1A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x1B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x1C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x31) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x32) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x33) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x34) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x35) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x36) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x48) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x49) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x4A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x4B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x4C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x61) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x62) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x63) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x64) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x65) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x66) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x78) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x79) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x7A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x7B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x7C) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, -- cgit v1.2.3 From c9d09dc7ad106492c17c587b6eeb99fe3f43e522 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Diego=20Elio=20Petten=C3=B2?= Date: Tue, 8 Oct 2013 20:03:37 +0100 Subject: USB: serial: ti_usb_3410_5052: add Abbott strip port ID to combined table as well. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Without this change, the USB cable for Freestyle Option and compatible glucometers will not be detected by the driver. Signed-off-by: Diego Elio Pettenò Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ti_usb_3410_5052.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 760b78560f67..c9a35697ebe9 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -190,6 +190,7 @@ static struct usb_device_id ti_id_table_combined[] = { { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) }, { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) }, + { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) }, { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) }, { } /* terminator */ }; -- cgit v1.2.3 From f4c19b8e165cff1a6607c21f8809441d61cab7ec Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sat, 5 Oct 2013 18:14:18 -0700 Subject: USB: serial: option: add support for Inovia SEW858 device This patch adds the device id for the Inovia SEW858 device to the option driver. Reported-by: Pavel Parkhomenko Tested-by: Pavel Parkhomenko Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 74c64b900b85..2bde20087b64 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -451,6 +451,10 @@ static void option_instat_callback(struct urb *urb); #define CHANGHONG_VENDOR_ID 0x2077 #define CHANGHONG_PRODUCT_CH690 0x7001 +/* Inovia */ +#define INOVIA_VENDOR_ID 0x20a6 +#define INOVIA_SEW858 0x1105 + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -1561,6 +1565,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */ + { USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit v1.2.3 From 5d4494573c1fed806b97c2a1ba619d50bb89d1ed Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 11 Oct 2013 13:20:50 +0200 Subject: ACPI / hotplug / PCI: Fix error code path in acpiphp_enumerate_slots() One of the error code paths in acpiphp_enumerate_slots() is missing a pci_dev_put(bridge->pci_dev) call, so add it. Signed-off-by: Rafael J. Wysocki Acked-by: Bjorn Helgaas --- drivers/pci/hotplug/acpiphp_glue.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 0b7d23b4ad95..5042b572609e 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -1002,6 +1002,7 @@ void acpiphp_enumerate_slots(struct pci_bus *bus) if (WARN_ON(!context)) { mutex_unlock(&acpiphp_context_lock); put_device(&bus->dev); + pci_dev_put(bridge->pci_dev); kfree(bridge); return; } -- cgit v1.2.3 From fd3cfebec3199bb89acead236b1ab12c349ed4e0 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 12 Oct 2013 01:49:48 +0200 Subject: ACPI / hotplug / PCI: Drop WARN_ON() from acpiphp_enumerate_slots() The WARN_ON() in acpiphp_enumerate_slots() triggers unnecessarily for devices whose bridges are going to be handled by native PCIe hotplug (pciehp) and the simplest way to prevent that from happening is to drop the WARN_ON(). References: https://bugzilla.kernel.org/show_bug.cgi?id=62831 Reported-by: Steven Rostedt Signed-off-by: Rafael J. Wysocki --- drivers/pci/hotplug/acpiphp_glue.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 5042b572609e..be12fbfcae10 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -994,12 +994,13 @@ void acpiphp_enumerate_slots(struct pci_bus *bus) /* * This bridge should have been registered as a hotplug function - * under its parent, so the context has to be there. If not, we - * are in deep goo. + * under its parent, so the context should be there, unless the + * parent is going to be handled by pciehp, in which case this + * bridge is not interesting to us either. */ mutex_lock(&acpiphp_context_lock); context = acpiphp_get_context(handle); - if (WARN_ON(!context)) { + if (!context) { mutex_unlock(&acpiphp_context_lock); put_device(&bus->dev); pci_dev_put(bridge->pci_dev); -- cgit v1.2.3 From 00bfacfeb4a70053527b2b9ba2eb09ce0be0c1a4 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sat, 12 Oct 2013 07:46:00 +0100 Subject: iio: frequency: adf4350: add missing clk_disable_unprepare() on error in adf4350_probe() Add the missing clk_disable_unprepare() before return from adf4350_probe() in the error handling case. Signed-off-by: Wei Yongjun Reviewed-by: Lars-Peter CLausen Signed-off-by: Jonathan Cameron --- drivers/iio/frequency/adf4350.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/frequency/adf4350.c b/drivers/iio/frequency/adf4350.c index a7b30be86ae0..52605c0ea3a6 100644 --- a/drivers/iio/frequency/adf4350.c +++ b/drivers/iio/frequency/adf4350.c @@ -525,8 +525,10 @@ static int adf4350_probe(struct spi_device *spi) } indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); - if (indio_dev == NULL) - return -ENOMEM; + if (indio_dev == NULL) { + ret = -ENOMEM; + goto error_disable_clk; + } st = iio_priv(indio_dev); -- cgit v1.2.3 From 8612ed0d97abcf1c016d34755b7cf2060de71963 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 23 Aug 2013 11:40:59 +0300 Subject: watchdog: ts72xx_wdt: locking bug in ioctl Calling the WDIOC_GETSTATUS & WDIOC_GETBOOTSTATUS and twice will cause a interruptible deadlock. Signed-off-by: Dan Carpenter Reviewed-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/ts72xx_wdt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/watchdog/ts72xx_wdt.c b/drivers/watchdog/ts72xx_wdt.c index 42913f131dc2..c9b0c627fe7e 100644 --- a/drivers/watchdog/ts72xx_wdt.c +++ b/drivers/watchdog/ts72xx_wdt.c @@ -310,7 +310,8 @@ static long ts72xx_wdt_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: - return put_user(0, p); + error = put_user(0, p); + break; case WDIOC_KEEPALIVE: ts72xx_wdt_kick(wdt); -- cgit v1.2.3 From 4c4e45669de475573b15d968a6dca8d00124c9ad Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Mon, 23 Sep 2013 19:16:57 +0900 Subject: watchdog: kempld_wdt: Fix bit mask definition STAGE_CFG bits are defined as [5:4] bits. However, '(((x) & 0x30) << 4)' handles [9:8] bits. Thus, it should be fixed in order to handle [5:4] bits. Signed-off-by: Jingoo Han Reviewed-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/kempld_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/watchdog/kempld_wdt.c b/drivers/watchdog/kempld_wdt.c index 491419e0772a..5c3d4df63e68 100644 --- a/drivers/watchdog/kempld_wdt.c +++ b/drivers/watchdog/kempld_wdt.c @@ -35,7 +35,7 @@ #define KEMPLD_WDT_STAGE_TIMEOUT(x) (0x1b + (x) * 4) #define KEMPLD_WDT_STAGE_CFG(x) (0x18 + (x)) #define STAGE_CFG_GET_PRESCALER(x) (((x) & 0x30) >> 4) -#define STAGE_CFG_SET_PRESCALER(x) (((x) & 0x30) << 4) +#define STAGE_CFG_SET_PRESCALER(x) (((x) & 0x3) << 4) #define STAGE_CFG_PRESCALER_MASK 0x30 #define STAGE_CFG_ACTION_MASK 0x7 #define STAGE_CFG_ASSERT (1 << 3) -- cgit v1.2.3 From 1d5898b4f8a0f6e231546d30dd54f6f9b89c232c Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 5 Oct 2013 16:20:17 +0200 Subject: watchdog: sunxi: Fix section mismatch This driver has a section mismatch, for probe and remove functions, leading to the following warning during the compilation. WARNING: drivers/watchdog/built-in.o(.data+0x24): Section mismatch in reference from the variable sunxi_wdt_driver to the function .init.text:sunxi_wdt_probe() The variable sunxi_wdt_driver references the function __init sunxi_wdt_probe() Signed-off-by: Maxime Ripard Reviewed-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sunxi_wdt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/watchdog/sunxi_wdt.c b/drivers/watchdog/sunxi_wdt.c index 1f94b42764aa..f6caa77151c7 100644 --- a/drivers/watchdog/sunxi_wdt.c +++ b/drivers/watchdog/sunxi_wdt.c @@ -146,7 +146,7 @@ static const struct watchdog_ops sunxi_wdt_ops = { .set_timeout = sunxi_wdt_set_timeout, }; -static int __init sunxi_wdt_probe(struct platform_device *pdev) +static int sunxi_wdt_probe(struct platform_device *pdev) { struct sunxi_wdt_dev *sunxi_wdt; struct resource *res; @@ -187,7 +187,7 @@ static int __init sunxi_wdt_probe(struct platform_device *pdev) return 0; } -static int __exit sunxi_wdt_remove(struct platform_device *pdev) +static int sunxi_wdt_remove(struct platform_device *pdev) { struct sunxi_wdt_dev *sunxi_wdt = platform_get_drvdata(pdev); -- cgit v1.2.3 From 444c91e5720cb5b825356e32c67c2c5184d1c09a Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 3 Oct 2013 21:04:31 +0100 Subject: of: fix unnecessary warning on missing /cpus node Not all DT platforms have all the cpus collected under a /cpus node. That just happens to be a details of FDT, ePAPR and PowerPC platforms. Sparc does something different, but unfortunately the current code complains with a warning if /cpus isn't there. This became a problem with commit f86e4718, "driver/core cpu: initialize of_node in cpu's device structure", which caused the function to get called for all architectures. This commit is a temporary fix to fail silently if the cpus node isn't present. A proper fix will come later to allow arch code to provide a custom mechanism for decoding the CPU hwid if the 'reg' property isn't appropriate. Signed-off-by: Grant Likely Cc: David Miller Cc: Sudeep KarkadaNagesha Cc: Rob Herring --- drivers/of/base.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/of/base.c b/drivers/of/base.c index 865d3f66c86b..7d4c70f859e3 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -303,10 +303,8 @@ struct device_node *of_get_cpu_node(int cpu, unsigned int *thread) struct device_node *cpun, *cpus; cpus = of_find_node_by_path("/cpus"); - if (!cpus) { - pr_warn("Missing cpus node, bailing out\n"); + if (!cpus) return NULL; - } for_each_child_of_node(cpus, cpun) { if (of_node_cmp(cpun->type, "cpu")) -- cgit v1.2.3 From b920ecc826eacf7ad7dfeabc0cf74a8b88e3b7f5 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 14 Oct 2013 12:46:04 +0100 Subject: Revert "of: Feed entire flattened device tree into the random pool" This reverts commit 109b6236294b53d8eaa50be7d9e9ad37079f5f7e. Tim Bird expressed concern that this will have a bad effect on boot time, and while simple tests have shown it to be okay with simple tree, a device tree blob can potentially be quite large and add_device_randomness() is not a fast function. Rather than do this for all platforms unconditionally, I'm reverting this patch and would like to see it revisited. Instead of feeding the entire tree into the random pool, it would probably be appropriate to hash the tree and feed the hash result into the pool. There really isn't a lot of randomness in a device tree anyway. In the majority of cases only a handful of properties are going to be different between machines with the same baseboard. Signed-off-by: Grant Likely --- drivers/of/fdt.c | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'drivers') diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index 229dd9d69e18..a4fa9ad31b8f 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -18,7 +18,6 @@ #include #include #include -#include #include /* for COMMAND_LINE_SIZE */ #ifdef CONFIG_PPC @@ -803,14 +802,3 @@ void __init unflatten_device_tree(void) } #endif /* CONFIG_OF_EARLY_FLATTREE */ - -/* Feed entire flattened device tree into the random pool */ -static int __init add_fdt_randomness(void) -{ - if (initial_boot_params) - add_device_randomness(initial_boot_params, - be32_to_cpu(initial_boot_params->totalsize)); - - return 0; -} -core_initcall(add_fdt_randomness); -- cgit v1.2.3 From 2b50176d11866e59208a4ed1623b3fc0ca322690 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 8 Oct 2013 16:07:22 -0700 Subject: IB: Remove unnecessary semicolons These aren't necessary after switch blocks. Signed-off-by: Joe Perches Signed-off-by: Roland Dreier --- drivers/infiniband/hw/amso1100/c2_ae.c | 2 +- drivers/infiniband/hw/mthca/mthca_eq.c | 2 +- drivers/infiniband/hw/ocrdma/ocrdma_hw.c | 6 +++--- drivers/infiniband/hw/ocrdma/ocrdma_main.c | 2 +- drivers/infiniband/hw/ocrdma/ocrdma_verbs.c | 6 +++--- 5 files changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/amso1100/c2_ae.c b/drivers/infiniband/hw/amso1100/c2_ae.c index d5d1929753e4..cedda25232be 100644 --- a/drivers/infiniband/hw/amso1100/c2_ae.c +++ b/drivers/infiniband/hw/amso1100/c2_ae.c @@ -141,7 +141,7 @@ static const char *to_qp_state_str(int state) return "C2_QP_STATE_ERROR"; default: return ""; - }; + } } void c2_ae_event(struct c2_dev *c2dev, u32 mq_index) diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c index 7c9d35f39d75..690201738993 100644 --- a/drivers/infiniband/hw/mthca/mthca_eq.c +++ b/drivers/infiniband/hw/mthca/mthca_eq.c @@ -357,7 +357,7 @@ static int mthca_eq_int(struct mthca_dev *dev, struct mthca_eq *eq) mthca_warn(dev, "Unhandled event %02x(%02x) on EQ %d\n", eqe->type, eqe->subtype, eq->eqn); break; - }; + } set_eqe_hw(eqe); ++eq->cons_index; diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c index 4ed8235d2d36..50219ab2279d 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c @@ -150,7 +150,7 @@ enum ib_qp_state get_ibqp_state(enum ocrdma_qp_state qps) return IB_QPS_SQE; case OCRDMA_QPS_ERR: return IB_QPS_ERR; - }; + } return IB_QPS_ERR; } @@ -171,7 +171,7 @@ static enum ocrdma_qp_state get_ocrdma_qp_state(enum ib_qp_state qps) return OCRDMA_QPS_SQE; case IB_QPS_ERR: return OCRDMA_QPS_ERR; - }; + } return OCRDMA_QPS_ERR; } @@ -1982,7 +1982,7 @@ int ocrdma_mbx_create_qp(struct ocrdma_qp *qp, struct ib_qp_init_attr *attrs, break; default: return -EINVAL; - }; + } cmd = ocrdma_init_emb_mqe(OCRDMA_CMD_CREATE_QP, sizeof(*cmd)); if (!cmd) diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_main.c b/drivers/infiniband/hw/ocrdma/ocrdma_main.c index 56e004940f18..0ce7674621ea 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_main.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_main.c @@ -531,7 +531,7 @@ static void ocrdma_event_handler(struct ocrdma_dev *dev, u32 event) case BE_DEV_DOWN: ocrdma_close(dev); break; - }; + } } static struct ocrdma_driver ocrdma_drv = { diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c index 6e982bb43c31..69f1d1221a6b 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c @@ -141,7 +141,7 @@ static inline void get_link_speed_and_width(struct ocrdma_dev *dev, /* Unsupported */ *ib_speed = IB_SPEED_SDR; *ib_width = IB_WIDTH_1X; - }; + } } @@ -2331,7 +2331,7 @@ static enum ib_wc_status ocrdma_to_ibwc_err(u16 status) default: ibwc_status = IB_WC_GENERAL_ERR; break; - }; + } return ibwc_status; } @@ -2370,7 +2370,7 @@ static void ocrdma_update_wc(struct ocrdma_qp *qp, struct ib_wc *ibwc, pr_err("%s() invalid opcode received = 0x%x\n", __func__, hdr->cw & OCRDMA_WQE_OPCODE_MASK); break; - }; + } } static void ocrdma_set_cqe_status_flushed(struct ocrdma_qp *qp, -- cgit v1.2.3 From 4294bca7b423d1a5aa24307e3d112a04075e3763 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 14 Oct 2013 16:22:40 +0200 Subject: USB: quirks.c: add one device that cannot deal with suspension The device is not responsive when resumed, unless it is reset. Signed-off-by: Oliver Neukum CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 5b44cd47da5b..b23f71f669a9 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -130,6 +130,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Broadcom BCM92035DGROM BT dongle */ { USB_DEVICE(0x0a5c, 0x2021), .driver_info = USB_QUIRK_RESET_RESUME }, + /* MAYA44USB sound device */ + { USB_DEVICE(0x0a92, 0x0091), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Action Semiconductor flash disk */ { USB_DEVICE(0x10d6, 0x2200), .driver_info = USB_QUIRK_STRING_FETCH_255 }, -- cgit v1.2.3 From 43e699cebee2d521d499b6c9abbdcdfa46ac28f7 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 14 Oct 2013 13:06:15 -0700 Subject: Revert "usb: musb: gadget: fix otg active status flag" This reverts commit 9b0a1de3c85d99d881c86a29b3d52da7b9c7bd61. Aaro writes: With v3.12-rc4 I can no longer connect to N800 (OMAP2) with USB (peripheral, g_ether). According to git bisect this is caused by: 9b0a1de3c85d99d881c86a29b3d52da7b9c7bd61 is the first bad commit So revert this patch, as Felipe says: It's unfortunate that tusb6010 is so messed up Reported-by: Aaro Koskinen Acked-by: Felipe Balbi Cc: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 07bf4dfddeaa..3671898a4535 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1853,6 +1853,7 @@ static int musb_gadget_start(struct usb_gadget *g, musb->gadget_driver = driver; spin_lock_irqsave(&musb->lock, flags); + musb->is_active = 1; otg_set_peripheral(otg, &musb->g); musb->xceiv->state = OTG_STATE_B_IDLE; -- cgit v1.2.3 From 1931ee143b0ab72924944bc06e363d837ba05063 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Fri, 11 Oct 2013 09:27:28 +0200 Subject: Revert "drivers: of: add initialization code for dma reserved memory" This reverts commit 9d8eab7af79cb4ce2de5de39f82c455b1f796963. There is still no consensus on the bindings for the reserved memory and various drawbacks of the proposed solution has been shown, so the best now is to revert it completely and start again from scratch later. Signed-off-by: Marek Szyprowski Signed-off-by: Grant Likely --- drivers/of/Kconfig | 6 -- drivers/of/Makefile | 1 - drivers/of/of_reserved_mem.c | 173 ------------------------------------------- drivers/of/platform.c | 4 - 4 files changed, 184 deletions(-) delete mode 100644 drivers/of/of_reserved_mem.c (limited to 'drivers') diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig index 9d2009a9004d..78cc76053328 100644 --- a/drivers/of/Kconfig +++ b/drivers/of/Kconfig @@ -74,10 +74,4 @@ config OF_MTD depends on MTD def_bool y -config OF_RESERVED_MEM - depends on OF_FLATTREE && (DMA_CMA || (HAVE_GENERIC_DMA_COHERENT && HAVE_MEMBLOCK)) - def_bool y - help - Initialization code for DMA reserved memory - endmenu # OF diff --git a/drivers/of/Makefile b/drivers/of/Makefile index ed9660adad77..efd05102c405 100644 --- a/drivers/of/Makefile +++ b/drivers/of/Makefile @@ -9,4 +9,3 @@ obj-$(CONFIG_OF_MDIO) += of_mdio.o obj-$(CONFIG_OF_PCI) += of_pci.o obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o obj-$(CONFIG_OF_MTD) += of_mtd.o -obj-$(CONFIG_OF_RESERVED_MEM) += of_reserved_mem.o diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c deleted file mode 100644 index 0fe40c7d6904..000000000000 --- a/drivers/of/of_reserved_mem.c +++ /dev/null @@ -1,173 +0,0 @@ -/* - * Device tree based initialization code for reserved memory. - * - * Copyright (c) 2013 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * Author: Marek Szyprowski - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License or (at your optional) any later version of the license. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define MAX_RESERVED_REGIONS 16 -struct reserved_mem { - phys_addr_t base; - unsigned long size; - struct cma *cma; - char name[32]; -}; -static struct reserved_mem reserved_mem[MAX_RESERVED_REGIONS]; -static int reserved_mem_count; - -static int __init fdt_scan_reserved_mem(unsigned long node, const char *uname, - int depth, void *data) -{ - struct reserved_mem *rmem = &reserved_mem[reserved_mem_count]; - phys_addr_t base, size; - int is_cma, is_reserved; - unsigned long len; - const char *status; - __be32 *prop; - - is_cma = IS_ENABLED(CONFIG_DMA_CMA) && - of_flat_dt_is_compatible(node, "linux,contiguous-memory-region"); - is_reserved = of_flat_dt_is_compatible(node, "reserved-memory-region"); - - if (!is_reserved && !is_cma) { - /* ignore node and scan next one */ - return 0; - } - - status = of_get_flat_dt_prop(node, "status", &len); - if (status && strcmp(status, "okay") != 0) { - /* ignore disabled node nad scan next one */ - return 0; - } - - prop = of_get_flat_dt_prop(node, "reg", &len); - if (!prop || (len < (dt_root_size_cells + dt_root_addr_cells) * - sizeof(__be32))) { - pr_err("Reserved mem: node %s, incorrect \"reg\" property\n", - uname); - /* ignore node and scan next one */ - return 0; - } - base = dt_mem_next_cell(dt_root_addr_cells, &prop); - size = dt_mem_next_cell(dt_root_size_cells, &prop); - - if (!size) { - /* ignore node and scan next one */ - return 0; - } - - pr_info("Reserved mem: found %s, memory base %lx, size %ld MiB\n", - uname, (unsigned long)base, (unsigned long)size / SZ_1M); - - if (reserved_mem_count == ARRAY_SIZE(reserved_mem)) - return -ENOSPC; - - rmem->base = base; - rmem->size = size; - strlcpy(rmem->name, uname, sizeof(rmem->name)); - - if (is_cma) { - struct cma *cma; - if (dma_contiguous_reserve_area(size, base, 0, &cma) == 0) { - rmem->cma = cma; - reserved_mem_count++; - if (of_get_flat_dt_prop(node, - "linux,default-contiguous-region", - NULL)) - dma_contiguous_set_default(cma); - } - } else if (is_reserved) { - if (memblock_remove(base, size) == 0) - reserved_mem_count++; - else - pr_err("Failed to reserve memory for %s\n", uname); - } - - return 0; -} - -static struct reserved_mem *get_dma_memory_region(struct device *dev) -{ - struct device_node *node; - const char *name; - int i; - - node = of_parse_phandle(dev->of_node, "memory-region", 0); - if (!node) - return NULL; - - name = kbasename(node->full_name); - for (i = 0; i < reserved_mem_count; i++) - if (strcmp(name, reserved_mem[i].name) == 0) - return &reserved_mem[i]; - return NULL; -} - -/** - * of_reserved_mem_device_init() - assign reserved memory region to given device - * - * This function assign memory region pointed by "memory-region" device tree - * property to the given device. - */ -void of_reserved_mem_device_init(struct device *dev) -{ - struct reserved_mem *region = get_dma_memory_region(dev); - if (!region) - return; - - if (region->cma) { - dev_set_cma_area(dev, region->cma); - pr_info("Assigned CMA %s to %s device\n", region->name, - dev_name(dev)); - } else { - if (dma_declare_coherent_memory(dev, region->base, region->base, - region->size, DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) != 0) - pr_info("Declared reserved memory %s to %s device\n", - region->name, dev_name(dev)); - } -} - -/** - * of_reserved_mem_device_release() - release reserved memory device structures - * - * This function releases structures allocated for memory region handling for - * the given device. - */ -void of_reserved_mem_device_release(struct device *dev) -{ - struct reserved_mem *region = get_dma_memory_region(dev); - if (!region && !region->cma) - dma_release_declared_memory(dev); -} - -/** - * early_init_dt_scan_reserved_mem() - create reserved memory regions - * - * This function grabs memory from early allocator for device exclusive use - * defined in device tree structures. It should be called by arch specific code - * once the early allocator (memblock) has been activated and all other - * subsystems have already allocated/reserved memory. - */ -void __init early_init_dt_scan_reserved_mem(void) -{ - of_scan_flat_dt_by_path("/memory/reserved-memory", - fdt_scan_reserved_mem, NULL); -} diff --git a/drivers/of/platform.c b/drivers/of/platform.c index 9b439ac63d8e..f6dcde220821 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -21,7 +21,6 @@ #include #include #include -#include #include const struct of_device_id of_default_bus_match_table[] = { @@ -219,8 +218,6 @@ static struct platform_device *of_platform_device_create_pdata( dev->dev.bus = &platform_bus_type; dev->dev.platform_data = platform_data; - of_reserved_mem_device_init(&dev->dev); - /* We do not fill the DMA ops for platform devices by default. * This is currently the responsibility of the platform code * to do such, possibly using a device notifier @@ -228,7 +225,6 @@ static struct platform_device *of_platform_device_create_pdata( if (of_device_add(dev) != 0) { platform_device_put(dev); - of_reserved_mem_device_release(&dev->dev); return NULL; } -- cgit v1.2.3 From e086ed76671252d5b539854a83f8506be7bea05c Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 15 Oct 2013 09:38:00 +0100 Subject: iio:buffer: Free active scan mask in iio_disable_all_buffers() Usually the active scan mask is freed in __iio_update_buffers() when the buffer is disabled. But when the device is still sampling when it is removed we'll end up disabling the buffers in iio_disable_all_buffers(). So we also need to free the active scan mask here, otherwise it will be leaked. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/industrialio-buffer.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c index 2710f7245c3b..2db7dcd826b9 100644 --- a/drivers/iio/industrialio-buffer.c +++ b/drivers/iio/industrialio-buffer.c @@ -477,6 +477,9 @@ void iio_disable_all_buffers(struct iio_dev *indio_dev) indio_dev->currentmode = INDIO_DIRECT_MODE; if (indio_dev->setup_ops->postdisable) indio_dev->setup_ops->postdisable(indio_dev); + + if (indio_dev->available_scan_masks == NULL) + kfree(indio_dev->active_scan_mask); } int iio_update_buffers(struct iio_dev *indio_dev, -- cgit v1.2.3 From d7d49012b917647794b6df33f4e7a61a2c818ccf Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Tue, 15 Oct 2013 19:48:11 +0800 Subject: ACPI / power: Release resource_lock after acpi_power_get_state() return error In acpi_resume_power_resources() resource_lock should be released when acpi_power_get_state() fails and before passing to next power resource on the list. Signed-off-by: Lan Tianyu Signed-off-by: Rafael J. Wysocki --- drivers/acpi/power.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 0dbe5cdf3396..0c1c3ec784fb 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -936,8 +936,10 @@ void acpi_resume_power_resources(void) mutex_lock(&resource->resource_lock); result = acpi_power_get_state(resource->device.handle, &state); - if (result) + if (result) { + mutex_unlock(&resource->resource_lock); continue; + } if (state == ACPI_POWER_RESOURCE_STATE_OFF && resource->ref_count) { -- cgit v1.2.3 From 7d13f94ce242a9166811eb6a30a5cd712952fb04 Mon Sep 17 00:00:00 2001 From: Krzysztof Mazur Date: Sun, 13 Oct 2013 00:11:00 +0200 Subject: ACPI: remove /proc/acpi/event from ACPI_BUTTON help Commit 1696d9d (ACPI: Remove the old /proc/acpi/event interface) left /proc/acpi/event in the ACPI_BUTTON help in Kconfig, so remove it from there. [rjw: Changelog] Signed-off-by: Krzysztof Mazur Signed-off-by: Rafael J. Wysocki --- drivers/acpi/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 5ea5c32609ac..6efe2ac6902f 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -123,9 +123,9 @@ config ACPI_BUTTON default y help This driver handles events on the power, sleep, and lid buttons. - A daemon reads /proc/acpi/event and perform user-defined actions - such as shutting down the system. This is necessary for - software-controlled poweroff. + A daemon reads events from input devices or via netlink and + performs user-defined actions such as shutting down the system. + This is necessary for software-controlled poweroff. To compile this driver as a module, choose M here: the module will be called button. -- cgit v1.2.3 From 52e0a509e5d6f902ec26bc2a8bb02b137dc453be Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Tue, 15 Oct 2013 11:06:14 -0700 Subject: cpufreq / intel_pstate: Fix max_perf_pct on resume If the system is suspended while max_perf_pct is less than 100 percent or no_turbo set policy->{min,max} will be set incorrectly with scaled values which turn the scaled values into hard limits. References: https://bugzilla.kernel.org/show_bug.cgi?id=61241 Reported-by: Patrick Bartels Signed-off-by: Dirk Brandewie Cc: 3.9+ # 3.9+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 32b3479a2405..28fefe3dd731 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -637,8 +637,8 @@ static int intel_pstate_cpu_exit(struct cpufreq_policy *policy) static int intel_pstate_cpu_init(struct cpufreq_policy *policy) { - int rc, min_pstate, max_pstate; struct cpudata *cpu; + int rc; rc = intel_pstate_init_cpu(policy->cpu); if (rc) @@ -652,9 +652,8 @@ static int intel_pstate_cpu_init(struct cpufreq_policy *policy) else policy->policy = CPUFREQ_POLICY_POWERSAVE; - intel_pstate_get_min_max(cpu, &min_pstate, &max_pstate); - policy->min = min_pstate * 100000; - policy->max = max_pstate * 100000; + policy->min = cpu->pstate.min_pstate * 100000; + policy->max = cpu->pstate.turbo_pstate * 100000; /* cpuinfo and default policy values */ policy->cpuinfo.min_freq = cpu->pstate.min_pstate * 100000; -- cgit v1.2.3 From e9c6a182649f4259db704ae15a91ac820e63b0ca Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Wed, 16 Oct 2013 03:17:47 +0100 Subject: dm snapshot: fix data corruption This patch fixes a particular type of data corruption that has been encountered when loading a snapshot's metadata from disk. When we allocate a new chunk in persistent_prepare, we increment ps->next_free and we make sure that it doesn't point to a metadata area by further incrementing it if necessary. When we load metadata from disk on device activation, ps->next_free is positioned after the last used data chunk. However, if this last used data chunk is followed by a metadata area, ps->next_free is positioned erroneously to the metadata area. A newly-allocated chunk is placed at the same location as the metadata area, resulting in data or metadata corruption. This patch changes the code so that ps->next_free skips the metadata area when metadata are loaded in function read_exceptions. The patch also moves a piece of code from persistent_prepare_exception to a separate function skip_metadata to avoid code duplication. CVE-2013-4299 Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org Cc: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-snap-persistent.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-snap-persistent.c b/drivers/md/dm-snap-persistent.c index 4caa8e6d59d7..2d2b1b7588d7 100644 --- a/drivers/md/dm-snap-persistent.c +++ b/drivers/md/dm-snap-persistent.c @@ -269,6 +269,14 @@ static chunk_t area_location(struct pstore *ps, chunk_t area) return NUM_SNAPSHOT_HDR_CHUNKS + ((ps->exceptions_per_area + 1) * area); } +static void skip_metadata(struct pstore *ps) +{ + uint32_t stride = ps->exceptions_per_area + 1; + chunk_t next_free = ps->next_free; + if (sector_div(next_free, stride) == NUM_SNAPSHOT_HDR_CHUNKS) + ps->next_free++; +} + /* * Read or write a metadata area. Remembering to skip the first * chunk which holds the header. @@ -502,6 +510,8 @@ static int read_exceptions(struct pstore *ps, ps->current_area--; + skip_metadata(ps); + return 0; } @@ -616,8 +626,6 @@ static int persistent_prepare_exception(struct dm_exception_store *store, struct dm_exception *e) { struct pstore *ps = get_info(store); - uint32_t stride; - chunk_t next_free; sector_t size = get_dev_size(dm_snap_cow(store->snap)->bdev); /* Is there enough room ? */ @@ -630,10 +638,8 @@ static int persistent_prepare_exception(struct dm_exception_store *store, * Move onto the next free pending, making sure to take * into account the location of the metadata chunks. */ - stride = (ps->exceptions_per_area + 1); - next_free = ++ps->next_free; - if (sector_div(next_free, stride) == 1) - ps->next_free++; + ps->next_free++; + skip_metadata(ps); atomic_inc(&ps->pending_count); return 0; -- cgit v1.2.3 From 614ced91fc6fbb5a1cdd12f0f1b6c9197d9f1350 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 16 Oct 2013 12:26:07 +0200 Subject: USB: quirks: add touchscreen that is dazzeled by remote wakeup The device descriptors are messed up after remote wakeup Signed-off-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index b23f71f669a9..01fe36273f3b 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -97,6 +97,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Alcor Micro Corp. Hub */ { USB_DEVICE(0x058f, 0x9254), .driver_info = USB_QUIRK_RESET_RESUME }, + /* MicroTouch Systems touchscreen */ + { USB_DEVICE(0x0596, 0x051e), .driver_info = USB_QUIRK_RESET_RESUME }, + /* appletouch */ { USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME }, -- cgit v1.2.3 From d969de8d83401683420638c8107dcfedb2146f37 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 14 Oct 2013 23:21:15 +0200 Subject: serial: vt8500: add missing braces Due to missing braces on an if statement, in presence of a device_node a port was always assigned -1, regardless of any alias entries in the device tree. Conversely, if device_node was NULL, an unitialized port ended up being used. This patch adds the missing braces, fixing the issues. Signed-off-by: Roel Kluin Acked-by: Tony Prisk Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/vt8500_serial.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c index 93b697a0de65..15ad6fcda88b 100644 --- a/drivers/tty/serial/vt8500_serial.c +++ b/drivers/tty/serial/vt8500_serial.c @@ -561,12 +561,13 @@ static int vt8500_serial_probe(struct platform_device *pdev) if (!mmres || !irqres) return -ENODEV; - if (np) + if (np) { port = of_alias_get_id(np, "serial"); if (port >= VT8500_MAX_PORTS) port = -1; - else + } else { port = -1; + } if (port < 0) { /* calculate the port id */ -- cgit v1.2.3 From fd8573f5828873343903215f203f14dc82de397c Mon Sep 17 00:00:00 2001 From: Enrico Mioso Date: Tue, 15 Oct 2013 15:06:47 +0200 Subject: usb: serial: option: blacklist Olivetti Olicard200 Interface 6 of this device speaks QMI as per tests done by us. Credits go to Antonella for providing the hardware. Signed-off-by: Enrico Mioso Signed-off-by: Antonella Pellizzari Tested-by: Dan Williams Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 2bde20087b64..acaee066b99a 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1477,7 +1477,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) }, - { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200) }, + { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200), + .driver_info = (kernel_ulong_t)&net_intf6_blacklist + }, { USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */ { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) }, -- cgit v1.2.3 From 32c37fc30c52508711ea6a108cfd5855b8a07176 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 14 Oct 2013 15:24:55 +0200 Subject: usb-storage: add quirk for mandatory READ_CAPACITY_16 Some USB drive enclosures do not correctly report an overflow condition if they hold a drive with a capacity over 2TB and are confronted with a READ_CAPACITY_10. They answer with their capacity modulo 2TB. The generic layer cannot cope with that. It must be told to use READ_CAPACITY_16 from the beginning. Signed-off-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/scsiglue.c | 5 ++++- drivers/usb/storage/unusual_devs.h | 7 +++++++ 2 files changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 94d75edef77f..18509e6c21ab 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -211,8 +211,11 @@ static int slave_configure(struct scsi_device *sdev) /* * Many devices do not respond properly to READ_CAPACITY_16. * Tell the SCSI layer to try READ_CAPACITY_10 first. + * However some USB 3.0 drive enclosures return capacity + * modulo 2TB. Those must use READ_CAPACITY_16 */ - sdev->try_rc_10_first = 1; + if (!(us->fflags & US_FL_NEEDS_CAP16)) + sdev->try_rc_10_first = 1; /* assume SPC3 or latter devices support sense size > 18 */ if (sdev->scsi_level > SCSI_SPC_2) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index c015f2c16729..de32cfa5bfa6 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1925,6 +1925,13 @@ UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Reported by Oliver Neukum */ +UNUSUAL_DEV( 0x174c, 0x55aa, 0x0100, 0x0100, + "ASMedia", + "AS2105", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NEEDS_CAP16), + /* Reported by Jesse Feddema */ UNUSUAL_DEV( 0x177f, 0x0400, 0x0000, 0x0000, "Yarvik", -- cgit v1.2.3 From 41314fea2ffb6dc716b7e698a47c68b329602fc0 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Wed, 16 Oct 2013 13:45:15 +0100 Subject: usb/chipidea: fix oops on memory allocation failure When CMA fails to initialize in v3.12-rc4, the chipidea driver oopses the kernel while trying to remove and put the HCD which doesn't exist: WARNING: CPU: 0 PID: 6 at /home/rmk/git/linux-rmk/arch/arm/mm/dma-mapping.c:511 __dma_alloc+0x200/0x240() coherent pool not initialised! Modules linked in: CPU: 0 PID: 6 Comm: kworker/u2:0 Tainted: G W 3.12.0-rc4+ #56 Workqueue: deferwq deferred_probe_work_func Backtrace: [] (dump_backtrace+0x0/0x10c) from [] (show_stack+0x18/0x1c) r6:c05fd9cc r5:000001ff r4:00000000 r3:df86ad00 [] (show_stack+0x0/0x1c) from [] (dump_stack+0x70/0x8c) [] (dump_stack+0x0/0x8c) from [] (warn_slowpath_common+0x6c/0x8c) r4:df883a60 r3:df86ad00 [] (warn_slowpath_common+0x0/0x8c) from [] (warn_slowpath_fmt+0x38/0x40) r8:ffffffff r7:00001000 r6:c083b808 r5:00000000 r4:df2efe80 [] (warn_slowpath_fmt+0x0/0x40) from [] (__dma_alloc+0x200/0x240) r3:00000000 r2:c05fda00 [] (__dma_alloc+0x0/0x240) from [] (arm_dma_alloc+0x88/0xa0) [] (arm_dma_alloc+0x0/0xa0) from [] (ehci_setup+0x1f4/0x438) [] (ehci_setup+0x0/0x438) from [] (usb_add_hcd+0x18c/0x664) [] (usb_add_hcd+0x0/0x664) from [] (host_start+0xf0/0x180) [] (host_start+0x0/0x180) from [] (ci_hdrc_probe+0x360/0x670 ) r6:df2ef410 r5:00000000 r4:df2c3010 r3:c03e8904 [] (ci_hdrc_probe+0x0/0x670) from [] (platform_drv_probe+0x20/0x24) [] (platform_drv_probe+0x0/0x24) from [] (driver_probe_device+0x9c/0x234) ... ---[ end trace c88ccaf3969e8422 ]--- Unable to handle kernel NULL pointer dereference at virtual address 00000028 pgd = c0004000 [00000028] *pgd=00000000 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: CPU: 0 PID: 6 Comm: kworker/u2:0 Tainted: G W 3.12.0-rc4+ #56 Workqueue: deferwq deferred_probe_work_func task: df86ad00 ti: df882000 task.ti: df882000 PC is at usb_remove_hcd+0x10/0x150 LR is at host_stop+0x1c/0x3c pc : [] lr : [] psr: 60000013 sp : df883b50 ip : df883b78 fp : df883b74 r10: c11f4c54 r9 : c0836450 r8 : df30c400 r7 : fffffff4 r6 : df2ef410 r5 : 00000000 r4 : df2c3010 r3 : 00000000 r2 : 00000000 r1 : df86b0a0 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 2f29404a DAC: 00000015 Process kworker/u2:0 (pid: 6, stack limit = 0xdf882240) Stack: (0xdf883b50 to 0xdf884000) ... Backtrace: [] (usb_remove_hcd+0x0/0x150) from [] (host_stop+0x1c/0x3c) r6:df2ef410 r5:00000000 r4:df2c3010 [] (host_stop+0x0/0x3c) from [] (ci_hdrc_host_destroy+0x1c/0x20) r5:00000000 r4:df2c3010 [] (ci_hdrc_host_destroy+0x0/0x20) from [] (ci_hdrc_probe+0x3ac/0x670) [] (ci_hdrc_probe+0x0/0x670) from [] (platform_drv_probe+0x20/0x24) [] (platform_drv_probe+0x0/0x24) from [] (driver_probe_device+0x9c/0x234) [] (driver_probe_device+0x0/0x234) from [] (__device_attach+0x44/0x48) ... ---[ end trace c88ccaf3969e8423 ]--- Fix this so at least we can continue booting and get to a shell prompt. Signed-off-by: Russell King Tested-by: Russell King Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/host.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index 6f96795dd20c..64d7a6d9a1ad 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -100,8 +100,10 @@ static void host_stop(struct ci_hdrc *ci) { struct usb_hcd *hcd = ci->hcd; - usb_remove_hcd(hcd); - usb_put_hcd(hcd); + if (hcd) { + usb_remove_hcd(hcd); + usb_put_hcd(hcd); + } if (ci->platdata->reg_vbus) regulator_disable(ci->platdata->reg_vbus); } -- cgit v1.2.3 From eea88512f82ebf1336253ead6c476c9cb54bdf0e Mon Sep 17 00:00:00 2001 From: Matthew Dawson Date: Wed, 16 Oct 2013 00:11:24 -0400 Subject: usb: misc: usb3503: Fix compile error due to incorrect regmap depedency The USB3503 driver had an incorrect depedency on REGMAP, instead of REGMAP_I2C. This caused the build to fail since the necessary regmap i2c pieces were not available. Signed-off-by: Matthew Dawson Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index e2b21c1d9c40..ba5f70f92888 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -246,6 +246,6 @@ config USB_EZUSB_FX2 config USB_HSIC_USB3503 tristate "USB3503 HSIC to USB20 Driver" depends on I2C - select REGMAP + select REGMAP_I2C help This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver. -- cgit v1.2.3 From 90d33f3ec519db19d785216299a4ee85ef58ec97 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Fri, 11 Oct 2013 17:27:16 -0700 Subject: Drivers: hv: vmbus: Fix a bug in channel rescind code Rescind of subchannels were not being correctly handled. Fix the bug. Signed-off-by: K. Y. Srinivasan Cc: [3.11+] Signed-off-by: Greg Kroah-Hartman --- drivers/hv/channel_mgmt.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c index bbff5f200bef..eebf56634ed5 100644 --- a/drivers/hv/channel_mgmt.c +++ b/drivers/hv/channel_mgmt.c @@ -203,7 +203,8 @@ static void vmbus_process_rescind_offer(struct work_struct *work) struct vmbus_channel *primary_channel; struct vmbus_channel_relid_released msg; - vmbus_device_unregister(channel->device_obj); + if (channel->device_obj) + vmbus_device_unregister(channel->device_obj); memset(&msg, 0, sizeof(struct vmbus_channel_relid_released)); msg.child_relid = channel->offermsg.child_relid; msg.header.msgtype = CHANNELMSG_RELID_RELEASED; @@ -213,11 +214,6 @@ static void vmbus_process_rescind_offer(struct work_struct *work) spin_lock_irqsave(&vmbus_connection.channel_lock, flags); list_del(&channel->listentry); spin_unlock_irqrestore(&vmbus_connection.channel_lock, flags); - } else { - primary_channel = channel->primary_channel; - spin_lock_irqsave(&primary_channel->sc_lock, flags); - list_del(&channel->listentry); - spin_unlock_irqrestore(&primary_channel->sc_lock, flags); } free_channel(channel); } -- cgit v1.2.3 From 09c87e2f79eb336bd313090be8113ae29345b8f5 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 16 Oct 2013 22:59:33 +0200 Subject: intel_pstate: Fix type mismatch warning The expression in line 398 of intel_pstate.c causes the following warning to be emitted: drivers/cpufreq/intel_pstate.c:398:3: warning: left shift count >= width of type which happens because unsigned long is 32-bit on some architectures. Fix that by using a helper u64 variable and simplify the code slightly. Tested-by: Srinivas Pandruvada Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 28fefe3dd731..badf6206b2b2 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -383,6 +383,7 @@ static void intel_pstate_get_min_max(struct cpudata *cpu, int *min, int *max) static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate) { int max_perf, min_perf; + u64 val; intel_pstate_get_min_max(cpu, &min_perf, &max_perf); @@ -394,11 +395,11 @@ static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate) trace_cpu_frequency(pstate * 100000, cpu->cpu); cpu->pstate.current_pstate = pstate; + val = pstate << 8; if (limits.no_turbo) - wrmsrl(MSR_IA32_PERF_CTL, BIT(32) | (pstate << 8)); - else - wrmsrl(MSR_IA32_PERF_CTL, pstate << 8); + val |= (u64)1 << 32; + wrmsrl(MSR_IA32_PERF_CTL, val); } static inline void intel_pstate_pstate_increase(struct cpudata *cpu, int steps) -- cgit v1.2.3 From 41863fcee3039ec3de15003b78e7284c4393e862 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 16 Oct 2013 23:05:42 +0200 Subject: ACPI / power: Drop automaitc resume of power resource dependent devices The mechanism causing devices depending on a given power resource (that is, devices that can be in D0 only if that power resource is on) to be resumed automatically when the power resource is turned on (and their "inferred" power state becomes D0 as a result) is inherently racy and in fact unnecessary. It is racy, because if the power resource is turned on and then immediately off, the device resume triggered by the first transition to "on" may still happen, causing the power resource to be turned on again. That again will trigger the "resume of dependent devices" mechanism, but if the devices in question are not in use, they will be suspended in the meantime causing the power resource to be turned off. However, the "resume of dependent devices" will next resume them again and so on. In some cases (USB port PM in particular) that leads to an endless busy loop of flipping the resource on and off continuously. It is needless, because whoever turns a power resource on will most likely turn it off at some point and the devices that go into "D0" as a result of turning it on will then go back into D3cold (generally, the state they were in before). Moreover, turning on all power resources a device needs to go into D0 is not sufficient for a full transition into D0 in general. Namely, _PS0 may need to be executed in addition to that in some cases. This means that the whole rationale of the "resume of dependent devices" mechanism was incorrect to begin with and it's best to remove it entirely. Signed-off-by: Rafael J. Wysocki --- drivers/acpi/power.c | 100 +-------------------------------------------------- 1 file changed, 1 insertion(+), 99 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 0c1c3ec784fb..c2ad391d8041 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -59,16 +59,9 @@ ACPI_MODULE_NAME("power"); #define ACPI_POWER_RESOURCE_STATE_ON 0x01 #define ACPI_POWER_RESOURCE_STATE_UNKNOWN 0xFF -struct acpi_power_dependent_device { - struct list_head node; - struct acpi_device *adev; - struct work_struct work; -}; - struct acpi_power_resource { struct acpi_device device; struct list_head list_node; - struct list_head dependent; char *name; u32 system_level; u32 order; @@ -233,32 +226,6 @@ static int acpi_power_get_list_state(struct list_head *list, int *state) return 0; } -static void acpi_power_resume_dependent(struct work_struct *work) -{ - struct acpi_power_dependent_device *dep; - struct acpi_device_physical_node *pn; - struct acpi_device *adev; - int state; - - dep = container_of(work, struct acpi_power_dependent_device, work); - adev = dep->adev; - if (acpi_power_get_inferred_state(adev, &state)) - return; - - if (state > ACPI_STATE_D0) - return; - - mutex_lock(&adev->physical_node_lock); - - list_for_each_entry(pn, &adev->physical_node_list, node) - pm_request_resume(pn->dev); - - list_for_each_entry(pn, &adev->power_dependent, node) - pm_request_resume(pn->dev); - - mutex_unlock(&adev->physical_node_lock); -} - static int __acpi_power_on(struct acpi_power_resource *resource) { acpi_status status = AE_OK; @@ -283,14 +250,8 @@ static int acpi_power_on_unlocked(struct acpi_power_resource *resource) resource->name)); } else { result = __acpi_power_on(resource); - if (result) { + if (result) resource->ref_count--; - } else { - struct acpi_power_dependent_device *dep; - - list_for_each_entry(dep, &resource->dependent, node) - schedule_work(&dep->work); - } } return result; } @@ -390,52 +351,6 @@ static int acpi_power_on_list(struct list_head *list) return result; } -static void acpi_power_add_dependent(struct acpi_power_resource *resource, - struct acpi_device *adev) -{ - struct acpi_power_dependent_device *dep; - - mutex_lock(&resource->resource_lock); - - list_for_each_entry(dep, &resource->dependent, node) - if (dep->adev == adev) - goto out; - - dep = kzalloc(sizeof(*dep), GFP_KERNEL); - if (!dep) - goto out; - - dep->adev = adev; - INIT_WORK(&dep->work, acpi_power_resume_dependent); - list_add_tail(&dep->node, &resource->dependent); - - out: - mutex_unlock(&resource->resource_lock); -} - -static void acpi_power_remove_dependent(struct acpi_power_resource *resource, - struct acpi_device *adev) -{ - struct acpi_power_dependent_device *dep; - struct work_struct *work = NULL; - - mutex_lock(&resource->resource_lock); - - list_for_each_entry(dep, &resource->dependent, node) - if (dep->adev == adev) { - list_del(&dep->node); - work = &dep->work; - break; - } - - mutex_unlock(&resource->resource_lock); - - if (work) { - cancel_work_sync(work); - kfree(dep); - } -} - static struct attribute *attrs[] = { NULL, }; @@ -524,8 +439,6 @@ static void acpi_power_expose_hide(struct acpi_device *adev, void acpi_power_add_remove_device(struct acpi_device *adev, bool add) { - struct acpi_device_power_state *ps; - struct acpi_power_resource_entry *entry; int state; if (adev->wakeup.flags.valid) @@ -535,16 +448,6 @@ void acpi_power_add_remove_device(struct acpi_device *adev, bool add) if (!adev->power.flags.power_resources) return; - ps = &adev->power.states[ACPI_STATE_D0]; - list_for_each_entry(entry, &ps->resources, node) { - struct acpi_power_resource *resource = entry->resource; - - if (add) - acpi_power_add_dependent(resource, adev); - else - acpi_power_remove_dependent(resource, adev); - } - for (state = ACPI_STATE_D0; state <= ACPI_STATE_D3_HOT; state++) acpi_power_expose_hide(adev, &adev->power.states[state].resources, @@ -882,7 +785,6 @@ int acpi_add_power_resource(acpi_handle handle) acpi_init_device_object(device, handle, ACPI_BUS_TYPE_POWER, ACPI_STA_DEFAULT); mutex_init(&resource->resource_lock); - INIT_LIST_HEAD(&resource->dependent); INIT_LIST_HEAD(&resource->list_node); resource->name = device->pnp.bus_id; strcpy(acpi_device_name(device), ACPI_POWER_DEVICE_NAME); -- cgit v1.2.3 From 0e8244322b7fc45fd11a1c45f70b6bacddf4986f Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Mon, 14 Oct 2013 19:36:47 +0100 Subject: cpufreq: s3c64xx: Rename index to driver_data The index field of cpufreq_frequency_table has been renamed to driver_data by commit 5070158 (cpufreq: rename index as driver_data in cpufreq_frequency_table). This patch updates the s3c64xx driver to match. Signed-off-by: Charles Keepax Cc: 3.11+ # 3.11+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/s3c64xx-cpufreq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cpufreq/s3c64xx-cpufreq.c b/drivers/cpufreq/s3c64xx-cpufreq.c index 8a72b0c555f8..15631f92ab7d 100644 --- a/drivers/cpufreq/s3c64xx-cpufreq.c +++ b/drivers/cpufreq/s3c64xx-cpufreq.c @@ -166,7 +166,7 @@ static void __init s3c64xx_cpufreq_config_regulator(void) if (freq->frequency == CPUFREQ_ENTRY_INVALID) continue; - dvfs = &s3c64xx_dvfs_table[freq->index]; + dvfs = &s3c64xx_dvfs_table[freq->driver_data]; found = 0; for (i = 0; i < count; i++) { -- cgit v1.2.3 From a37f86305c80f441b8b99dae7c19d3f9d2effc15 Mon Sep 17 00:00:00 2001 From: Yasuaki Ishimatsu Date: Fri, 11 Oct 2013 15:36:25 +0900 Subject: driver core: Release device_hotplug_lock when store_mem_state returns EINVAL When inserting a wrong value to /sys/devices/system/memory/memoryX/state file, following messages are shown. And device_hotplug_lock is never released. ================================================ [ BUG: lock held when returning to user space! ] 3.12.0-rc4-debug+ #3 Tainted: G W ------------------------------------------------ bash/6442 is leaving the kernel with locks still held! 1 lock held by bash/6442: #0: (device_hotplug_lock){+.+.+.}, at: [] lock_device_hotplug_sysfs+0x15/0x50 This issue was introdued by commit fa2be40 (drivers: base: use standard device online/offline for state change). This patch releases device_hotplug_lcok when store_mem_state returns EINVAL. Signed-off-by: Yasuaki Ishimatsu Reviewed-by: Toshi Kani CC: Seth Jennings Signed-off-by: Greg Kroah-Hartman --- drivers/base/memory.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/base/memory.c b/drivers/base/memory.c index 9e59f6535c44..bece691cb5d9 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -333,8 +333,10 @@ store_mem_state(struct device *dev, online_type = ONLINE_KEEP; else if (!strncmp(buf, "offline", min_t(int, count, 7))) online_type = -1; - else - return -EINVAL; + else { + ret = -EINVAL; + goto err; + } switch (online_type) { case ONLINE_KERNEL: @@ -357,6 +359,7 @@ store_mem_state(struct device *dev, ret = -EINVAL; /* should never happen */ } +err: unlock_device_hotplug(); if (ret) -- cgit v1.2.3 From b08fc109ce4a32ce2f73f6e0437abc94ab1dd023 Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Thu, 17 Oct 2013 15:38:53 +0200 Subject: ATA / ACPI: remove power dependent device handling Previously, we wanted SCSI devices corrsponding to ATA devices to be runtime resumed when the power resource for those ATA device was turned on by some other device, so we added the SCSI device to the dependent device list of the ATA device's ACPI node. However, this code has no effect after commit 41863fc (ACPI / power: Drop automaitc resume of power resource dependent devices) and the mechanism it was supposed to implement is regarded as a bad idea now, so drop it. [rjw: Changelog] Signed-off-by: Aaron Lu Signed-off-by: Rafael J. Wysocki --- drivers/ata/libata-acpi.c | 14 -------------- drivers/ata/libata-scsi.c | 3 --- drivers/ata/libata.h | 4 ---- 3 files changed, 21 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index 4ba8b0405572..ab714d2ad978 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -1035,17 +1035,3 @@ void ata_acpi_on_disable(struct ata_device *dev) { ata_acpi_clear_gtf(dev); } - -void ata_scsi_acpi_bind(struct ata_device *dev) -{ - acpi_handle handle = ata_dev_acpi_handle(dev); - if (handle) - acpi_dev_pm_add_dependent(handle, &dev->sdev->sdev_gendev); -} - -void ata_scsi_acpi_unbind(struct ata_device *dev) -{ - acpi_handle handle = ata_dev_acpi_handle(dev); - if (handle) - acpi_dev_pm_remove_dependent(handle, &dev->sdev->sdev_gendev); -} diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 97a0cef12959..db6dfcfa3e2e 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3679,7 +3679,6 @@ void ata_scsi_scan_host(struct ata_port *ap, int sync) if (!IS_ERR(sdev)) { dev->sdev = sdev; scsi_device_put(sdev); - ata_scsi_acpi_bind(dev); } else { dev->sdev = NULL; } @@ -3767,8 +3766,6 @@ static void ata_scsi_remove_dev(struct ata_device *dev) struct scsi_device *sdev; unsigned long flags; - ata_scsi_acpi_unbind(dev); - /* Alas, we need to grab scan_mutex to ensure SCSI device * state doesn't change underneath us and thus * scsi_device_get() always succeeds. The mutex locking can diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index eeeb77845d48..45b5ab3a95d5 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -121,8 +121,6 @@ extern void ata_acpi_set_state(struct ata_port *ap, pm_message_t state); extern void ata_acpi_bind_port(struct ata_port *ap); extern void ata_acpi_bind_dev(struct ata_device *dev); extern acpi_handle ata_dev_acpi_handle(struct ata_device *dev); -extern void ata_scsi_acpi_bind(struct ata_device *dev); -extern void ata_scsi_acpi_unbind(struct ata_device *dev); #else static inline void ata_acpi_dissociate(struct ata_host *host) { } static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; } @@ -133,8 +131,6 @@ static inline void ata_acpi_set_state(struct ata_port *ap, pm_message_t state) { } static inline void ata_acpi_bind_port(struct ata_port *ap) {} static inline void ata_acpi_bind_dev(struct ata_device *dev) {} -static inline void ata_scsi_acpi_bind(struct ata_device *dev) {} -static inline void ata_scsi_acpi_unbind(struct ata_device *dev) {} #endif /* libata-scsi.c */ -- cgit v1.2.3 From 2421ad48f4aed63bc890e8f3c53ed581a542fb66 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 17 Oct 2013 15:44:48 +0200 Subject: ACPI / PM: Drop two functions that are not used any more Two functions defined in device_pm.c, acpi_dev_pm_add_dependent() and acpi_dev_pm_remove_dependent(), have no callers and may be dropped, so drop them. Moreover, they are the only functions adding entries to and removing entries from the power_dependent list in struct acpi_device, so drop that list too. Signed-off-by: Rafael J. Wysocki --- drivers/acpi/device_pm.c | 56 ------------------------------------------------ drivers/acpi/scan.c | 1 - 2 files changed, 57 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index 59d3202f6b36..a94383d1f350 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -1025,60 +1025,4 @@ void acpi_dev_pm_detach(struct device *dev, bool power_off) } } EXPORT_SYMBOL_GPL(acpi_dev_pm_detach); - -/** - * acpi_dev_pm_add_dependent - Add physical device depending for PM. - * @handle: Handle of ACPI device node. - * @depdev: Device depending on that node for PM. - */ -void acpi_dev_pm_add_dependent(acpi_handle handle, struct device *depdev) -{ - struct acpi_device_physical_node *dep; - struct acpi_device *adev; - - if (!depdev || acpi_bus_get_device(handle, &adev)) - return; - - mutex_lock(&adev->physical_node_lock); - - list_for_each_entry(dep, &adev->power_dependent, node) - if (dep->dev == depdev) - goto out; - - dep = kzalloc(sizeof(*dep), GFP_KERNEL); - if (dep) { - dep->dev = depdev; - list_add_tail(&dep->node, &adev->power_dependent); - } - - out: - mutex_unlock(&adev->physical_node_lock); -} -EXPORT_SYMBOL_GPL(acpi_dev_pm_add_dependent); - -/** - * acpi_dev_pm_remove_dependent - Remove physical device depending for PM. - * @handle: Handle of ACPI device node. - * @depdev: Device depending on that node for PM. - */ -void acpi_dev_pm_remove_dependent(acpi_handle handle, struct device *depdev) -{ - struct acpi_device_physical_node *dep; - struct acpi_device *adev; - - if (!depdev || acpi_bus_get_device(handle, &adev)) - return; - - mutex_lock(&adev->physical_node_lock); - - list_for_each_entry(dep, &adev->power_dependent, node) - if (dep->dev == depdev) { - list_del(&dep->node); - kfree(dep); - break; - } - - mutex_unlock(&adev->physical_node_lock); -} -EXPORT_SYMBOL_GPL(acpi_dev_pm_remove_dependent); #endif /* CONFIG_PM */ diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 407ad13cac2f..fee8a297c7d9 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -999,7 +999,6 @@ int acpi_device_add(struct acpi_device *device, INIT_LIST_HEAD(&device->wakeup_list); INIT_LIST_HEAD(&device->physical_node_list); mutex_init(&device->physical_node_lock); - INIT_LIST_HEAD(&device->power_dependent); new_bus_id = kzalloc(sizeof(struct acpi_device_bus_id), GFP_KERNEL); if (!new_bus_id) { -- cgit v1.2.3 From b762799dd8b03ec0aafc54ba165564902eac3e18 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 17 Oct 2013 09:30:10 -0700 Subject: Revert "Drivers: hv: vmbus: Fix a bug in channel rescind code" This reverts commit 90d33f3ec519db19d785216299a4ee85ef58ec97 as it's not the correct fix for this issue, and it causes a build warning to be added to the kernel tree. Cc: K. Y. Srinivasan Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/hv/channel_mgmt.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c index eebf56634ed5..bbff5f200bef 100644 --- a/drivers/hv/channel_mgmt.c +++ b/drivers/hv/channel_mgmt.c @@ -203,8 +203,7 @@ static void vmbus_process_rescind_offer(struct work_struct *work) struct vmbus_channel *primary_channel; struct vmbus_channel_relid_released msg; - if (channel->device_obj) - vmbus_device_unregister(channel->device_obj); + vmbus_device_unregister(channel->device_obj); memset(&msg, 0, sizeof(struct vmbus_channel_relid_released)); msg.child_relid = channel->offermsg.child_relid; msg.header.msgtype = CHANNELMSG_RELID_RELEASED; @@ -214,6 +213,11 @@ static void vmbus_process_rescind_offer(struct work_struct *work) spin_lock_irqsave(&vmbus_connection.channel_lock, flags); list_del(&channel->listentry); spin_unlock_irqrestore(&vmbus_connection.channel_lock, flags); + } else { + primary_channel = channel->primary_channel; + spin_lock_irqsave(&primary_channel->sc_lock, flags); + list_del(&channel->listentry); + spin_unlock_irqrestore(&primary_channel->sc_lock, flags); } free_channel(channel); } -- cgit v1.2.3