From b60a5b8dcf49af9f2c60ae82e0383ee8e62a9a52 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 20 Mar 2019 06:39:44 -0400 Subject: media: Kconfig files: use the right help coding style Checkpatch wants to use 'help' instead of '---help---': WARNING: prefer 'help' over '---help---' for new help texts Let's change it globally at the media subsystem, as otherwise people would keep using the old way. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/Kconfig | 20 +-- drivers/media/cec/Kconfig | 4 +- drivers/media/common/siano/Kconfig | 4 +- drivers/media/i2c/Kconfig | 184 +++++++++++++-------------- drivers/media/i2c/cx25840/Kconfig | 2 +- drivers/media/i2c/et8ek8/Kconfig | 2 +- drivers/media/i2c/m5mols/Kconfig | 2 +- drivers/media/i2c/smiapp/Kconfig | 2 +- drivers/media/mmc/siano/Kconfig | 2 +- drivers/media/pci/bt8xx/Kconfig | 2 +- drivers/media/pci/cobalt/Kconfig | 2 +- drivers/media/pci/cx18/Kconfig | 4 +- drivers/media/pci/cx23885/Kconfig | 4 +- drivers/media/pci/cx25821/Kconfig | 4 +- drivers/media/pci/cx88/Kconfig | 10 +- drivers/media/pci/ddbridge/Kconfig | 4 +- drivers/media/pci/dt3155/Kconfig | 2 +- drivers/media/pci/intel/ipu3/Kconfig | 2 +- drivers/media/pci/ivtv/Kconfig | 10 +- drivers/media/pci/meye/Kconfig | 2 +- drivers/media/pci/netup_unidvb/Kconfig | 2 +- drivers/media/pci/ngene/Kconfig | 2 +- drivers/media/pci/saa7134/Kconfig | 10 +- drivers/media/pci/saa7146/Kconfig | 6 +- drivers/media/pci/saa7164/Kconfig | 2 +- drivers/media/pci/solo6x10/Kconfig | 2 +- drivers/media/pci/tw5864/Kconfig | 2 +- drivers/media/pci/tw68/Kconfig | 2 +- drivers/media/platform/Kconfig | 72 +++++------ drivers/media/platform/atmel/Kconfig | 2 +- drivers/media/platform/marvell-ccic/Kconfig | 4 +- drivers/media/platform/omap/Kconfig | 2 +- drivers/media/platform/rcar-vin/Kconfig | 2 +- drivers/media/platform/sti/c8sectpfe/Kconfig | 2 +- drivers/media/platform/vimc/Kconfig | 2 +- drivers/media/platform/vivid/Kconfig | 6 +- drivers/media/platform/xilinx/Kconfig | 6 +- drivers/media/radio/Kconfig | 54 ++++---- drivers/media/radio/si470x/Kconfig | 6 +- drivers/media/radio/si4713/Kconfig | 6 +- drivers/media/rc/Kconfig | 80 ++++++------ drivers/media/rc/keymaps/Kconfig | 2 +- drivers/media/spi/Kconfig | 2 +- drivers/media/usb/airspy/Kconfig | 2 +- drivers/media/usb/au0828/Kconfig | 6 +- drivers/media/usb/cpia2/Kconfig | 2 +- drivers/media/usb/cx231xx/Kconfig | 8 +- drivers/media/usb/em28xx/Kconfig | 8 +- drivers/media/usb/go7007/Kconfig | 8 +- drivers/media/usb/gspca/Kconfig | 2 +- drivers/media/usb/hackrf/Kconfig | 2 +- drivers/media/usb/hdpvr/Kconfig | 2 +- drivers/media/usb/pulse8-cec/Kconfig | 2 +- drivers/media/usb/pvrusb2/Kconfig | 8 +- drivers/media/usb/pwc/Kconfig | 4 +- drivers/media/usb/rainshadow-cec/Kconfig | 2 +- drivers/media/usb/siano/Kconfig | 2 +- drivers/media/usb/stk1160/Kconfig | 2 +- drivers/media/usb/stkwebcam/Kconfig | 2 +- drivers/media/usb/tm6000/Kconfig | 4 +- drivers/media/usb/usbtv/Kconfig | 2 +- drivers/media/usb/usbvision/Kconfig | 2 +- drivers/media/usb/uvc/Kconfig | 4 +- drivers/media/usb/zr364xx/Kconfig | 2 +- drivers/media/v4l2-core/Kconfig | 8 +- drivers/staging/media/Kconfig | 2 +- drivers/staging/media/bcm2048/Kconfig | 2 +- drivers/staging/media/imx/Kconfig | 4 +- drivers/staging/media/ipu3/Kconfig | 2 +- drivers/staging/media/omap4iss/Kconfig | 2 +- 70 files changed, 320 insertions(+), 320 deletions(-) (limited to 'drivers') diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig index 102eb35fcf3f..8efaf99243e0 100644 --- a/drivers/media/Kconfig +++ b/drivers/media/Kconfig @@ -31,14 +31,14 @@ comment "Multimedia core support" # config MEDIA_CAMERA_SUPPORT bool "Cameras/video grabbers support" - ---help--- + help Enable support for webcams and video grabbers. Say Y when you have a webcam or a video capture grabber board. config MEDIA_ANALOG_TV_SUPPORT bool "Analog TV support" - ---help--- + help Enable analog TV support. Say Y when you have a TV board with analog support or with a @@ -50,7 +50,7 @@ config MEDIA_ANALOG_TV_SUPPORT config MEDIA_DIGITAL_TV_SUPPORT bool "Digital TV support" - ---help--- + help Enable digital TV support. Say Y when you have a board with digital support or a board with @@ -58,7 +58,7 @@ config MEDIA_DIGITAL_TV_SUPPORT config MEDIA_RADIO_SUPPORT bool "AM/FM radio receivers/transmitters support" - ---help--- + help Enable AM/FM radio support. Additional info and docs are available on the web at @@ -72,14 +72,14 @@ config MEDIA_RADIO_SUPPORT config MEDIA_SDR_SUPPORT bool "Software defined radio support" - ---help--- + help Enable software defined radio support. Say Y when you have a software defined radio device. config MEDIA_CEC_SUPPORT bool "HDMI CEC support" - ---help--- + help Enable support for HDMI CEC (Consumer Electronics Control), which is an optional HDMI feature. @@ -96,7 +96,7 @@ source "drivers/media/cec/Kconfig" config MEDIA_CONTROLLER bool "Media Controller API" depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT - ---help--- + help Enable the media controller API used to query media devices internal topology and configure it dynamically. @@ -105,7 +105,7 @@ config MEDIA_CONTROLLER config MEDIA_CONTROLLER_DVB bool "Enable Media controller for DVB (EXPERIMENTAL)" depends on MEDIA_CONTROLLER && DVB_CORE - ---help--- + help Enable the media controller API support for DVB. This is currently experimental. @@ -114,7 +114,7 @@ config MEDIA_CONTROLLER_REQUEST_API bool "Enable Media controller Request API (EXPERIMENTAL)" depends on MEDIA_CONTROLLER && STAGING_MEDIA default n - ---help--- + help DO NOT ENABLE THIS OPTION UNLESS YOU KNOW WHAT YOU'RE DOING. This option enables the Request API for the Media controller and V4L2 @@ -137,7 +137,7 @@ config VIDEO_DEV config VIDEO_V4L2_SUBDEV_API bool "V4L2 sub-device userspace API" depends on VIDEO_DEV && MEDIA_CONTROLLER - ---help--- + help Enables the V4L2 sub-device pad-level userspace API used to configure video format, size and frame rate between hardware blocks. diff --git a/drivers/media/cec/Kconfig b/drivers/media/cec/Kconfig index 9c2b108c613a..b5aadacf335a 100644 --- a/drivers/media/cec/Kconfig +++ b/drivers/media/cec/Kconfig @@ -2,11 +2,11 @@ config MEDIA_CEC_RC bool "HDMI CEC RC integration" depends on CEC_CORE && RC_CORE depends on CEC_CORE=m || RC_CORE=y - ---help--- + help Pass on CEC remote control messages to the RC framework. config CEC_PIN_ERROR_INJ bool "Enable CEC error injection support" depends on CEC_PIN && DEBUG_FS - ---help--- + help This option enables CEC error injection using debugfs. diff --git a/drivers/media/common/siano/Kconfig b/drivers/media/common/siano/Kconfig index 4bfbd5f463d1..577880b133eb 100644 --- a/drivers/media/common/siano/Kconfig +++ b/drivers/media/common/siano/Kconfig @@ -15,7 +15,7 @@ config SMS_SIANO_RC depends on SMS_USB_DRV || SMS_SDIO_DRV depends on MEDIA_COMMON_OPTIONS default y - ---help--- + help Choose Y to select Remote Controller support for Siano driver. config SMS_SIANO_DEBUGFS @@ -24,7 +24,7 @@ config SMS_SIANO_DEBUGFS depends on DEBUG_FS depends on SMS_USB_DRV = SMS_SDIO_DRV - ---help--- + help Choose Y to enable visualizing a dump of the frontend statistics response packets via debugfs. Currently, works only with Siano USB devices. diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 1ef6335463c1..1a1746b3db91 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -8,7 +8,7 @@ config VIDEO_IR_I2C tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT depends on I2C && RC_CORE default y - ---help--- + help Most boards have an IR chip directly connected via GPIO. However, some video boards have the IR connected via I2C bus. @@ -29,7 +29,7 @@ comment "Audio decoders, processors and mixers" config VIDEO_TVAUDIO tristate "Simple audio decoder chips" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for several audio decoder chips found on some bt8xx boards: Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300, tea6320, tea6420, tda8425, ta8874z. @@ -41,7 +41,7 @@ config VIDEO_TVAUDIO config VIDEO_TDA7432 tristate "Philips TDA7432 audio processor" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for tda7432 audio decoder chip found on some bt8xx boards. To compile this driver as a module, choose M here: the @@ -50,7 +50,7 @@ config VIDEO_TDA7432 config VIDEO_TDA9840 tristate "Philips TDA9840 audio processor" depends on I2C - ---help--- + help Support for tda9840 audio decoder chip found on some Zoran boards. To compile this driver as a module, choose M here: the @@ -62,7 +62,7 @@ config VIDEO_TDA1997X depends on SND_SOC select SND_PCM select HDMI - ---help--- + help V4L2 subdevice driver for the NXP TDA1997x HDMI receivers. To compile this driver as a module, choose M here: the @@ -71,7 +71,7 @@ config VIDEO_TDA1997X config VIDEO_TEA6415C tristate "Philips TEA6415C audio processor" depends on I2C - ---help--- + help Support for tea6415c audio decoder chip found on some bt8xx boards. To compile this driver as a module, choose M here: the @@ -80,7 +80,7 @@ config VIDEO_TEA6415C config VIDEO_TEA6420 tristate "Philips TEA6420 audio processor" depends on I2C - ---help--- + help Support for tea6420 audio decoder chip found on some bt8xx boards. To compile this driver as a module, choose M here: the @@ -89,7 +89,7 @@ config VIDEO_TEA6420 config VIDEO_MSP3400 tristate "Micronas MSP34xx audio decoders" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the Micronas MSP34xx series of audio decoders. To compile this driver as a module, choose M here: the @@ -98,7 +98,7 @@ config VIDEO_MSP3400 config VIDEO_CS3308 tristate "Cirrus Logic CS3308 audio ADC" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the Cirrus Logic CS3308 High Performance 8-Channel Analog Volume Control @@ -108,7 +108,7 @@ config VIDEO_CS3308 config VIDEO_CS5345 tristate "Cirrus Logic CS5345 audio ADC" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the Cirrus Logic CS5345 24-bit, 192 kHz stereo A/D converter. @@ -118,7 +118,7 @@ config VIDEO_CS5345 config VIDEO_CS53L32A tristate "Cirrus Logic CS53L32A audio ADC" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the Cirrus Logic CS53L32A low voltage stereo A/D converter. @@ -128,7 +128,7 @@ config VIDEO_CS53L32A config VIDEO_TLV320AIC23B tristate "Texas Instruments TLV320AIC23B audio codec" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the Texas Instruments TLV320AIC23B audio codec. To compile this driver as a module, choose M here: the @@ -137,7 +137,7 @@ config VIDEO_TLV320AIC23B config VIDEO_UDA1342 tristate "Philips UDA1342 audio codec" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the Philips UDA1342 audio codec. To compile this driver as a module, choose M here: the @@ -146,7 +146,7 @@ config VIDEO_UDA1342 config VIDEO_WM8775 tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the Wolfson Microelectronics WM8775 high performance stereo A/D Converter with a 4 channel input mixer. @@ -156,7 +156,7 @@ config VIDEO_WM8775 config VIDEO_WM8739 tristate "Wolfson Microelectronics WM8739 stereo audio ADC" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the Wolfson Microelectronics WM8739 stereo A/D Converter. @@ -166,7 +166,7 @@ config VIDEO_WM8739 config VIDEO_VP27SMPX tristate "Panasonic VP27's internal MPX" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the internal MPX of the Panasonic VP27s tuner. To compile this driver as a module, choose M here: the @@ -200,7 +200,7 @@ comment "Video decoders" config VIDEO_ADV7180 tristate "Analog Devices ADV7180 decoder" depends on GPIOLIB && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API - ---help--- + help Support for the Analog Devices ADV7180 video decoder. To compile this driver as a module, choose M here: the @@ -209,7 +209,7 @@ config VIDEO_ADV7180 config VIDEO_ADV7183 tristate "Analog Devices ADV7183 decoder" depends on VIDEO_V4L2 && I2C - ---help--- + help V4l2 subdevice driver for the Analog Devices ADV7183 video decoder. @@ -222,7 +222,7 @@ config VIDEO_ADV748X depends on OF select REGMAP_I2C select V4L2_FWNODE - ---help--- + help V4L2 subdevice driver for the Analog Devices ADV7481 and ADV7482 HDMI/Analog video decoders. @@ -235,7 +235,7 @@ config VIDEO_ADV7604 depends on GPIOLIB || COMPILE_TEST select HDMI select V4L2_FWNODE - ---help--- + help Support for the Analog Devices ADV7604 video decoder. This is a Analog Devices Component/Graphics Digitizer @@ -248,7 +248,7 @@ config VIDEO_ADV7604_CEC bool "Enable Analog Devices ADV7604 CEC support" depends on VIDEO_ADV7604 select CEC_CORE - ---help--- + help When selected the adv7604 will support the optional HDMI CEC feature. @@ -256,7 +256,7 @@ config VIDEO_ADV7842 tristate "Analog Devices ADV7842 decoder" depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API select HDMI - ---help--- + help Support for the Analog Devices ADV7842 video decoder. This is a Analog Devices Component/Graphics/SD Digitizer @@ -269,14 +269,14 @@ config VIDEO_ADV7842_CEC bool "Enable Analog Devices ADV7842 CEC support" depends on VIDEO_ADV7842 select CEC_CORE - ---help--- + help When selected the adv7842 will support the optional HDMI CEC feature. config VIDEO_BT819 tristate "BT819A VideoStream decoder" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for BT819A video decoder. To compile this driver as a module, choose M here: the @@ -285,7 +285,7 @@ config VIDEO_BT819 config VIDEO_BT856 tristate "BT856 VideoStream decoder" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for BT856 video decoder. To compile this driver as a module, choose M here: the @@ -294,7 +294,7 @@ config VIDEO_BT856 config VIDEO_BT866 tristate "BT866 VideoStream decoder" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for BT866 video decoder. To compile this driver as a module, choose M here: the @@ -303,7 +303,7 @@ config VIDEO_BT866 config VIDEO_KS0127 tristate "KS0127 video decoder" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for KS0127 video decoder. This chip is used on AverMedia AVS6EYES Zoran-based MJPEG @@ -315,7 +315,7 @@ config VIDEO_KS0127 config VIDEO_ML86V7667 tristate "OKI ML86V7667 video decoder" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the OKI Semiconductor ML86V7667 video decoder. To compile this driver as a module, choose M here: the @@ -324,7 +324,7 @@ config VIDEO_ML86V7667 config VIDEO_SAA7110 tristate "Philips SAA7110 video decoder" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the Philips SAA7110 video decoders. To compile this driver as a module, choose M here: the @@ -333,7 +333,7 @@ config VIDEO_SAA7110 config VIDEO_SAA711X tristate "Philips SAA7111/3/4/5 video decoders" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the Philips SAA7111/3/4/5 video decoders. To compile this driver as a module, choose M here: the @@ -344,7 +344,7 @@ config VIDEO_TC358743 depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API select HDMI select V4L2_FWNODE - ---help--- + help Support for the Toshiba TC358743 HDMI to MIPI CSI-2 bridge. To compile this driver as a module, choose M here: the @@ -354,7 +354,7 @@ config VIDEO_TC358743_CEC bool "Enable Toshiba TC358743 CEC support" depends on VIDEO_TC358743 select CEC_CORE - ---help--- + help When selected the tc358743 will support the optional HDMI CEC feature. @@ -362,7 +362,7 @@ config VIDEO_TVP514X tristate "Texas Instruments TVP514x video decoder" depends on VIDEO_V4L2 && I2C select V4L2_FWNODE - ---help--- + help This is a Video4Linux2 sensor driver for the TI TVP5146/47 decoder. It is currently working with the TI OMAP3 camera controller. @@ -374,7 +374,7 @@ config VIDEO_TVP5150 tristate "Texas Instruments TVP5150 video decoder" depends on VIDEO_V4L2 && I2C select V4L2_FWNODE - ---help--- + help Support for the Texas Instruments TVP5150 video decoder. To compile this driver as a module, choose M here: the @@ -384,7 +384,7 @@ config VIDEO_TVP7002 tristate "Texas Instruments TVP7002 video decoder" depends on VIDEO_V4L2 && I2C select V4L2_FWNODE - ---help--- + help Support for the Texas Instruments TVP7002 video decoder. To compile this driver as a module, choose M here: the @@ -393,7 +393,7 @@ config VIDEO_TVP7002 config VIDEO_TW2804 tristate "Techwell TW2804 multiple video decoder" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the Techwell tw2804 multiple video decoder. To compile this driver as a module, choose M here: the @@ -402,7 +402,7 @@ config VIDEO_TW2804 config VIDEO_TW9903 tristate "Techwell TW9903 video decoder" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the Techwell tw9903 multi-standard video decoder with high quality down scaler. @@ -412,7 +412,7 @@ config VIDEO_TW9903 config VIDEO_TW9906 tristate "Techwell TW9906 video decoder" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the Techwell tw9906 enhanced multi-standard comb filter video decoder with YCbCr input support. @@ -422,7 +422,7 @@ config VIDEO_TW9906 config VIDEO_TW9910 tristate "Techwell TW9910 video decoder" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for Techwell TW9910 NTSC/PAL/SECAM video decoder. To compile this driver as a module, choose M here: the @@ -431,7 +431,7 @@ config VIDEO_TW9910 config VIDEO_VPX3220 tristate "vpx3220a, vpx3216b & vpx3214c video decoders" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for VPX322x video decoders. To compile this driver as a module, choose M here: the @@ -442,7 +442,7 @@ comment "Video and audio decoders" config VIDEO_SAA717X tristate "Philips SAA7171/3/4 audio/video decoders" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the Philips SAA7171/3/4 audio/video decoders. To compile this driver as a module, choose M here: the @@ -455,7 +455,7 @@ comment "Video encoders" config VIDEO_SAA7127 tristate "Philips SAA7127/9 digital video encoders" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the Philips SAA7127/9 digital video encoders. To compile this driver as a module, choose M here: the @@ -464,7 +464,7 @@ config VIDEO_SAA7127 config VIDEO_SAA7185 tristate "Philips SAA7185 video encoder" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the Philips SAA7185 video encoder. To compile this driver as a module, choose M here: the @@ -473,7 +473,7 @@ config VIDEO_SAA7185 config VIDEO_ADV7170 tristate "Analog Devices ADV7170 video encoder" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the Analog Devices ADV7170 video encoder driver To compile this driver as a module, choose M here: the @@ -482,7 +482,7 @@ config VIDEO_ADV7170 config VIDEO_ADV7175 tristate "Analog Devices ADV7175 video encoder" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the Analog Devices ADV7175 video encoder driver To compile this driver as a module, choose M here: the @@ -510,7 +510,7 @@ config VIDEO_ADV7511 tristate "Analog Devices ADV7511 encoder" depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API select HDMI - ---help--- + help Support for the Analog Devices ADV7511 video encoder. This is a Analog Devices HDMI transmitter. @@ -522,14 +522,14 @@ config VIDEO_ADV7511_CEC bool "Enable Analog Devices ADV7511 CEC support" depends on VIDEO_ADV7511 select CEC_CORE - ---help--- + help When selected the adv7511 will support the optional HDMI CEC feature. config VIDEO_AD9389B tristate "Analog Devices AD9389B encoder" depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API - ---help--- + help Support for the Analog Devices AD9389B video encoder. This is a Analog Devices HDMI transmitter. @@ -546,7 +546,7 @@ config VIDEO_AK881X config VIDEO_THS8200 tristate "Texas Instruments THS8200 video encoder" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the Texas Instruments THS8200 video encoder. To compile this driver as a module, choose M here: the @@ -576,7 +576,7 @@ config VIDEO_IMX258 tristate "Sony IMX258 sensor support" depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API depends on MEDIA_CAMERA_SUPPORT - ---help--- + help This is a Video4Linux2 sensor driver for the Sony IMX258 camera. @@ -588,7 +588,7 @@ config VIDEO_IMX274 depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API depends on MEDIA_CAMERA_SUPPORT select REGMAP_I2C - ---help--- + help This is a V4L2 sensor driver for the Sony IMX274 CMOS image sensor. @@ -630,7 +630,7 @@ config VIDEO_OV2659 depends on VIDEO_V4L2 && I2C depends on MEDIA_CAMERA_SUPPORT select V4L2_FWNODE - ---help--- + help This is a Video4Linux2 sensor driver for the OmniVision OV2659 camera. @@ -642,7 +642,7 @@ config VIDEO_OV2680 depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER depends on MEDIA_CAMERA_SUPPORT select V4L2_FWNODE - ---help--- + help This is a Video4Linux2 sensor driver for the OmniVision OV2680 camera. @@ -654,7 +654,7 @@ config VIDEO_OV2685 depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER depends on MEDIA_CAMERA_SUPPORT select V4L2_FWNODE - ---help--- + help This is a Video4Linux2 sensor driver for the OmniVision OV2685 camera. @@ -667,7 +667,7 @@ config VIDEO_OV5640 depends on GPIOLIB && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API depends on MEDIA_CAMERA_SUPPORT select V4L2_FWNODE - ---help--- + help This is a Video4Linux2 sensor driver for the Omnivision OV5640 camera sensor with a MIPI CSI-2 interface. @@ -677,7 +677,7 @@ config VIDEO_OV5645 depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API depends on MEDIA_CAMERA_SUPPORT select V4L2_FWNODE - ---help--- + help This is a Video4Linux2 sensor driver for the OmniVision OV5645 camera. @@ -689,7 +689,7 @@ config VIDEO_OV5647 depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API depends on MEDIA_CAMERA_SUPPORT select V4L2_FWNODE - ---help--- + help This is a Video4Linux2 sensor driver for the OmniVision OV5647 camera. @@ -700,7 +700,7 @@ config VIDEO_OV6650 tristate "OmniVision OV6650 sensor support" depends on I2C && VIDEO_V4L2 depends on MEDIA_CAMERA_SUPPORT - ---help--- + help This is a Video4Linux2 sensor driver for the OmniVision OV6650 camera. @@ -713,7 +713,7 @@ config VIDEO_OV5670 depends on MEDIA_CAMERA_SUPPORT depends on MEDIA_CONTROLLER select V4L2_FWNODE - ---help--- + help This is a Video4Linux2 sensor driver for the OmniVision OV5670 camera. @@ -724,7 +724,7 @@ config VIDEO_OV5695 tristate "OmniVision OV5695 sensor support" depends on I2C && VIDEO_V4L2 depends on MEDIA_CAMERA_SUPPORT - ---help--- + help This is a Video4Linux2 sensor driver for the OmniVision OV5695 camera. @@ -748,7 +748,7 @@ config VIDEO_OV772X depends on I2C && VIDEO_V4L2 depends on MEDIA_CAMERA_SUPPORT select REGMAP_SCCB - ---help--- + help This is a Video4Linux2 sensor driver for the OmniVision OV772x camera. @@ -759,7 +759,7 @@ config VIDEO_OV7640 tristate "OmniVision OV7640 sensor support" depends on I2C && VIDEO_V4L2 depends on MEDIA_CAMERA_SUPPORT - ---help--- + help This is a Video4Linux2 sensor driver for the OmniVision OV7640 camera. @@ -771,7 +771,7 @@ config VIDEO_OV7670 depends on I2C && VIDEO_V4L2 depends on MEDIA_CAMERA_SUPPORT select V4L2_FWNODE - ---help--- + help This is a Video4Linux2 sensor driver for the OmniVision OV7670 VGA camera. It currently only works with the M88ALP01 controller. @@ -780,7 +780,7 @@ config VIDEO_OV7740 tristate "OmniVision OV7740 sensor support" depends on I2C && VIDEO_V4L2 depends on MEDIA_CAMERA_SUPPORT - ---help--- + help This is a Video4Linux2 sensor driver for the OmniVision OV7740 VGA camera sensor. @@ -807,7 +807,7 @@ config VIDEO_OV9650 tristate "OmniVision OV9650/OV9652 sensor support" depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API select REGMAP_SCCB - ---help--- + help This is a V4L2 sensor driver for the Omnivision OV9650 and OV9652 camera sensors. @@ -816,7 +816,7 @@ config VIDEO_OV13858 depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API depends on MEDIA_CAMERA_SUPPORT select V4L2_FWNODE - ---help--- + help This is a Video4Linux2 sensor driver for the OmniVision OV13858 camera. @@ -824,7 +824,7 @@ config VIDEO_VS6624 tristate "ST VS6624 sensor support" depends on VIDEO_V4L2 && I2C depends on MEDIA_CAMERA_SUPPORT - ---help--- + help This is a Video4Linux2 sensor driver for the ST VS6624 camera. @@ -844,7 +844,7 @@ config VIDEO_MT9M032 depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API depends on MEDIA_CAMERA_SUPPORT select VIDEO_APTINA_PLL - ---help--- + help This driver supports MT9M032 camera sensors from Aptina, monochrome models only. @@ -861,7 +861,7 @@ config VIDEO_MT9P031 depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API depends on MEDIA_CAMERA_SUPPORT select VIDEO_APTINA_PLL - ---help--- + help This is a Video4Linux2 sensor driver for the Aptina (Micron) mt9p031 5 Mpixel camera. @@ -869,7 +869,7 @@ config VIDEO_MT9T001 tristate "Aptina MT9T001 support" depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API depends on MEDIA_CAMERA_SUPPORT - ---help--- + help This is a Video4Linux2 sensor driver for the Aptina (Micron) mt0t001 3 Mpixel camera. @@ -877,7 +877,7 @@ config VIDEO_MT9T112 tristate "Aptina MT9T111/MT9T112 support" depends on I2C && VIDEO_V4L2 depends on MEDIA_CAMERA_SUPPORT - ---help--- + help This is a Video4Linux2 sensor driver for the Aptina (Micron) MT9T111 and MT9T112 3 Mpixel camera. @@ -888,7 +888,7 @@ config VIDEO_MT9V011 tristate "Micron mt9v011 sensor support" depends on I2C && VIDEO_V4L2 depends on MEDIA_CAMERA_SUPPORT - ---help--- + help This is a Video4Linux2 sensor driver for the Micron mt0v011 1.3 Mpixel camera. It currently only works with the em28xx driver. @@ -899,7 +899,7 @@ config VIDEO_MT9V032 depends on MEDIA_CAMERA_SUPPORT select REGMAP_I2C select V4L2_FWNODE - ---help--- + help This is a Video4Linux2 sensor driver for the Micron MT9V032 752x480 CMOS sensor. @@ -918,14 +918,14 @@ config VIDEO_SR030PC30 tristate "Siliconfile SR030PC30 sensor support" depends on I2C && VIDEO_V4L2 depends on MEDIA_CAMERA_SUPPORT - ---help--- + help This driver supports SR030PC30 VGA camera from Siliconfile config VIDEO_NOON010PC30 tristate "Siliconfile NOON010PC30 sensor support" depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API depends on MEDIA_CAMERA_SUPPORT - ---help--- + help This driver supports NOON010PC30 CIF camera from Siliconfile source "drivers/media/i2c/m5mols/Kconfig" @@ -945,7 +945,7 @@ config VIDEO_S5K6AA tristate "Samsung S5K6AAFX sensor support" depends on MEDIA_CAMERA_SUPPORT depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API - ---help--- + help This is a V4L2 sensor driver for Samsung S5K6AA(FX) 1.3M camera sensor with an embedded SoC image signal processor. @@ -953,7 +953,7 @@ config VIDEO_S5K6A3 tristate "Samsung S5K6A3 sensor support" depends on MEDIA_CAMERA_SUPPORT depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API - ---help--- + help This is a V4L2 sensor driver for Samsung S5K6A3 raw camera sensor. @@ -961,7 +961,7 @@ config VIDEO_S5K4ECGX tristate "Samsung S5K4ECGX sensor support" depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API select CRC32 - ---help--- + help This is a V4L2 sensor driver for Samsung S5K4ECGX 5M camera sensor with an embedded SoC image signal processor. @@ -969,7 +969,7 @@ config VIDEO_S5K5BAF tristate "Samsung S5K5BAF sensor support" depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE - ---help--- + help This is a V4L2 sensor driver for Samsung S5K5BAF 2M camera sensor with an embedded SoC image signal processor. @@ -980,7 +980,7 @@ config VIDEO_S5C73M3 tristate "Samsung S5C73M3 sensor support" depends on I2C && SPI && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE - ---help--- + help This is a V4L2 sensor driver for Samsung S5C73M3 8 Mpixel camera. @@ -989,7 +989,7 @@ comment "Lens drivers" config VIDEO_AD5820 tristate "AD5820 lens voice coil support" depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER - ---help--- + help This is a driver for the AD5820 camera lens voice coil. It is used for example in Nokia N900 (RX-51). @@ -1007,7 +1007,7 @@ config VIDEO_DW9714 tristate "DW9714 lens voice coil support" depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER depends on VIDEO_V4L2_SUBDEV_API - ---help--- + help This is a driver for the DW9714 camera lens voice coil. DW9714 is a 10 bit DAC with 120mA output current sink capability. This is designed for linear control of @@ -1017,7 +1017,7 @@ config VIDEO_DW9807_VCM tristate "DW9807 lens voice coil support" depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER depends on VIDEO_V4L2_SUBDEV_API - ---help--- + help This is a driver for the DW9807 camera lens voice coil. DW9807 is a 10 bit DAC with 100mA output current sink capability. This is designed for linear control of @@ -1029,7 +1029,7 @@ config VIDEO_ADP1653 tristate "ADP1653 flash support" depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER depends on MEDIA_CAMERA_SUPPORT - ---help--- + help This is a driver for the ADP1653 flash controller. It is used for example in Nokia N900. @@ -1038,7 +1038,7 @@ config VIDEO_LM3560 depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER depends on MEDIA_CAMERA_SUPPORT select REGMAP_I2C - ---help--- + help This is a driver for the lm3560 dual flash controllers. It controls flash, torch LEDs. @@ -1047,7 +1047,7 @@ config VIDEO_LM3646 depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER depends on MEDIA_CAMERA_SUPPORT select REGMAP_I2C - ---help--- + help This is a driver for the lm3646 dual flash controllers. It controls flash, torch LEDs. @@ -1056,7 +1056,7 @@ comment "Video improvement chips" config VIDEO_UPD64031A tristate "NEC Electronics uPD64031A Ghost Reduction" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the NEC Electronics uPD64031A Ghost Reduction video chip. It is most often found in NTSC TV cards made for Japan and is used to reduce the 'ghosting' effect that can @@ -1068,7 +1068,7 @@ config VIDEO_UPD64031A config VIDEO_UPD64083 tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the NEC Electronics uPD64083 3-Dimensional Y/C separation video chip. It is used to improve the quality of the colors of a composite signal. @@ -1082,7 +1082,7 @@ config VIDEO_SAA6752HS tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder" depends on VIDEO_V4L2 && I2C select CRC32 - ---help--- + help Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3 audio encoder with multiplexer. @@ -1094,7 +1094,7 @@ comment "SDR tuner chips" config SDR_MAX2175 tristate "Maxim 2175 RF to Bits tuner" depends on VIDEO_V4L2 && MEDIA_SDR_SUPPORT && I2C - ---help--- + help Support for Maxim 2175 tuner. It is an advanced analog/digital radio receiver with RF-to-Bits front-end designed for SDR solutions. @@ -1115,7 +1115,7 @@ config VIDEO_THS7303 config VIDEO_M52790 tristate "Mitsubishi M52790 A/V switch" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the Mitsubishi M52790 A/V switch. To compile this driver as a module, choose M here: the @@ -1126,7 +1126,7 @@ config VIDEO_I2C depends on VIDEO_V4L2 && I2C select VIDEOBUF2_VMALLOC imply HWMON - ---help--- + help Enable the I2C transport video support which supports the following: * Panasonic AMG88xx Grid-Eye Sensors diff --git a/drivers/media/i2c/cx25840/Kconfig b/drivers/media/i2c/cx25840/Kconfig index 451133ad41ff..f4b31d7cb440 100644 --- a/drivers/media/i2c/cx25840/Kconfig +++ b/drivers/media/i2c/cx25840/Kconfig @@ -1,7 +1,7 @@ config VIDEO_CX25840 tristate "Conexant CX2584x audio/video decoders" depends on VIDEO_V4L2 && I2C - ---help--- + help Support for the Conexant CX2584x audio/video decoders. To compile this driver as a module, choose M here: the diff --git a/drivers/media/i2c/et8ek8/Kconfig b/drivers/media/i2c/et8ek8/Kconfig index 9fe409e95666..ab23b41bf353 100644 --- a/drivers/media/i2c/et8ek8/Kconfig +++ b/drivers/media/i2c/et8ek8/Kconfig @@ -2,6 +2,6 @@ config VIDEO_ET8EK8 tristate "ET8EK8 camera sensor support" depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API select V4L2_FWNODE - ---help--- + help This is a driver for the Toshiba ET8EK8 5 MP camera sensor. It is used for example in Nokia N900 (RX-51). diff --git a/drivers/media/i2c/m5mols/Kconfig b/drivers/media/i2c/m5mols/Kconfig index dc8c2505907e..be0bb3f1bc22 100644 --- a/drivers/media/i2c/m5mols/Kconfig +++ b/drivers/media/i2c/m5mols/Kconfig @@ -2,5 +2,5 @@ config VIDEO_M5MOLS tristate "Fujitsu M-5MOLS 8MP sensor support" depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API depends on MEDIA_CAMERA_SUPPORT - ---help--- + help This driver supports Fujitsu M-5MOLS camera sensor with ISP diff --git a/drivers/media/i2c/smiapp/Kconfig b/drivers/media/i2c/smiapp/Kconfig index f59718d8e51e..26b54f2aa95b 100644 --- a/drivers/media/i2c/smiapp/Kconfig +++ b/drivers/media/i2c/smiapp/Kconfig @@ -4,5 +4,5 @@ config VIDEO_SMIAPP depends on MEDIA_CAMERA_SUPPORT select VIDEO_SMIAPP_PLL select V4L2_FWNODE - ---help--- + help This is a generic driver for SMIA++/SMIA camera modules. diff --git a/drivers/media/mmc/siano/Kconfig b/drivers/media/mmc/siano/Kconfig index 7693487e2f63..3941ee8352bb 100644 --- a/drivers/media/mmc/siano/Kconfig +++ b/drivers/media/mmc/siano/Kconfig @@ -9,5 +9,5 @@ config SMS_SDIO_DRV depends on !RC_CORE || RC_CORE select MEDIA_COMMON_OPTIONS select SMS_SIANO_MDTV - ---help--- + help Choose if you would like to have Siano's support for SDIO interface diff --git a/drivers/media/pci/bt8xx/Kconfig b/drivers/media/pci/bt8xx/Kconfig index bc89e37608cd..0f46db7d5ffc 100644 --- a/drivers/media/pci/bt8xx/Kconfig +++ b/drivers/media/pci/bt8xx/Kconfig @@ -13,7 +13,7 @@ config VIDEO_BT848 select VIDEO_SAA6588 if MEDIA_SUBDRV_AUTOSELECT select RADIO_ADAPTERS select RADIO_TEA575X - ---help--- + help Support for BT848 based frame grabber/overlay boards. This includes the Miro, Hauppauge and STB boards. Please read the material in for more information. diff --git a/drivers/media/pci/cobalt/Kconfig b/drivers/media/pci/cobalt/Kconfig index aa35cbc0a904..9a544bab3178 100644 --- a/drivers/media/pci/cobalt/Kconfig +++ b/drivers/media/pci/cobalt/Kconfig @@ -11,7 +11,7 @@ config VIDEO_COBALT select VIDEO_ADV7511 select VIDEO_ADV7842 select VIDEOBUF2_DMA_SG - ---help--- + help This is a video4linux driver for the Cisco PCIe Cobalt card. This board is sadly not available outside of Cisco, but it is diff --git a/drivers/media/pci/cx18/Kconfig b/drivers/media/pci/cx18/Kconfig index c675b83c43a9..96477bba0d5c 100644 --- a/drivers/media/pci/cx18/Kconfig +++ b/drivers/media/pci/cx18/Kconfig @@ -13,7 +13,7 @@ config VIDEO_CX18 select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT - ---help--- + help This is a video4linux driver for Conexant cx23418 based PCI combo video recorder devices. @@ -27,7 +27,7 @@ config VIDEO_CX18_ALSA tristate "Conexant 23418 DMA audio support" depends on VIDEO_CX18 && SND select SND_PCM - ---help--- + help This is a video4linux driver for direct (DMA) audio on Conexant 23418 based TV cards using ALSA. diff --git a/drivers/media/pci/cx23885/Kconfig b/drivers/media/pci/cx23885/Kconfig index 3435bbaa3167..1bba9e497915 100644 --- a/drivers/media/pci/cx23885/Kconfig +++ b/drivers/media/pci/cx23885/Kconfig @@ -43,7 +43,7 @@ config VIDEO_CX23885 select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_M88RS6000T if MEDIA_SUBDRV_AUTOSELECT select DVB_TUNER_DIB0070 if MEDIA_SUBDRV_AUTOSELECT - ---help--- + help This is a video4linux driver for Conexant 23885 based TV cards. @@ -54,7 +54,7 @@ config MEDIA_ALTERA_CI tristate "Altera FPGA based CI module" depends on VIDEO_CX23885 && DVB_CORE select ALTERA_STAPL - ---help--- + help An Altera FPGA CI module for NetUP Dual DVB-T/C RF CI card. To compile this driver as a module, choose M here: the diff --git a/drivers/media/pci/cx25821/Kconfig b/drivers/media/pci/cx25821/Kconfig index 1755d3d2feaa..a64fa9a6d5d5 100644 --- a/drivers/media/pci/cx25821/Kconfig +++ b/drivers/media/pci/cx25821/Kconfig @@ -3,7 +3,7 @@ config VIDEO_CX25821 depends on VIDEO_DEV && PCI && I2C select I2C_ALGOBIT select VIDEOBUF2_DMA_SG - ---help--- + help This is a video4linux driver for Conexant 25821 based TV cards. @@ -14,7 +14,7 @@ config VIDEO_CX25821_ALSA tristate "Conexant 25821 DMA audio support" depends on VIDEO_CX25821 && SND select SND_PCM - ---help--- + help This is a video4linux driver for direct (DMA) audio on Conexant 25821 based capture cards using ALSA. diff --git a/drivers/media/pci/cx88/Kconfig b/drivers/media/pci/cx88/Kconfig index 14b813d634a8..fbb17ddb6bc3 100644 --- a/drivers/media/pci/cx88/Kconfig +++ b/drivers/media/pci/cx88/Kconfig @@ -6,7 +6,7 @@ config VIDEO_CX88 select VIDEO_TUNER select VIDEO_TVEEPROM select VIDEO_WM8775 if MEDIA_SUBDRV_AUTOSELECT - ---help--- + help This is a video4linux driver for Conexant 2388x based TV cards. @@ -17,7 +17,7 @@ config VIDEO_CX88_ALSA tristate "Conexant 2388x DMA audio support" depends on VIDEO_CX88 && SND select SND_PCM - ---help--- + help This is a video4linux driver for direct (DMA) audio on Conexant 2388x based TV cards using ALSA. @@ -33,7 +33,7 @@ config VIDEO_CX88_BLACKBIRD tristate "Blackbird MPEG encoder support (cx2388x + cx23416)" depends on VIDEO_CX88 select VIDEO_CX2341X - ---help--- + help This adds support for MPEG encoder cards based on the Blackbird reference design, using the Conexant 2388x and 23416 chips. @@ -64,7 +64,7 @@ config VIDEO_CX88_DVB select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT - ---help--- + help This adds support for DVB/ATSC cards based on the Conexant 2388x chip. @@ -75,7 +75,7 @@ config VIDEO_CX88_ENABLE_VP3054 bool "VP-3054 Secondary I2C Bus Support" default y depends on VIDEO_CX88_DVB && DVB_MT352 - ---help--- + help This adds DVB-T support for cards based on the Conexant 2388x chip and the MT352 demodulator, which also require support for the VP-3054 diff --git a/drivers/media/pci/ddbridge/Kconfig b/drivers/media/pci/ddbridge/Kconfig index 16faef265e97..fc98b6d575d9 100644 --- a/drivers/media/pci/ddbridge/Kconfig +++ b/drivers/media/pci/ddbridge/Kconfig @@ -15,7 +15,7 @@ config DVB_DDBRIDGE select DVB_MXL5XX if MEDIA_SUBDRV_AUTOSELECT select DVB_CXD2099 if MEDIA_SUBDRV_AUTOSELECT select DVB_DUMMY_FE if MEDIA_SUBDRV_AUTOSELECT - ---help--- + help Support for cards with the Digital Devices PCI express bridge: - Octopus PCIe Bridge - Octopus mini PCIe Bridge @@ -36,7 +36,7 @@ config DVB_DDBRIDGE_MSIENABLE depends on DVB_DDBRIDGE depends on PCI_MSI default n - ---help--- + help Use PCI MSI (Message Signaled Interrupts) per default. Enabling this might lead to I2C errors originating from the bridge in conjunction with certain SATA controllers, requiring a reload of the ddbridge diff --git a/drivers/media/pci/dt3155/Kconfig b/drivers/media/pci/dt3155/Kconfig index 858b0f2f15be..d770eec541d4 100644 --- a/drivers/media/pci/dt3155/Kconfig +++ b/drivers/media/pci/dt3155/Kconfig @@ -3,7 +3,7 @@ config VIDEO_DT3155 depends on PCI && VIDEO_DEV && VIDEO_V4L2 select VIDEOBUF2_DMA_CONTIG default n - ---help--- + help Enables dt3155 device driver for the DataTranslation DT3155 frame grabber. Say Y here if you have this hardware. In doubt, say N. diff --git a/drivers/media/pci/intel/ipu3/Kconfig b/drivers/media/pci/intel/ipu3/Kconfig index 715f77651482..bd518bdc9f5f 100644 --- a/drivers/media/pci/intel/ipu3/Kconfig +++ b/drivers/media/pci/intel/ipu3/Kconfig @@ -7,7 +7,7 @@ config VIDEO_IPU3_CIO2 select V4L2_FWNODE select VIDEOBUF2_DMA_SG - ---help--- + help This is the Intel IPU3 CIO2 CSI-2 receiver unit, found in Intel Skylake and Kaby Lake SoCs and used for capturing images and video from a camera sensor. diff --git a/drivers/media/pci/ivtv/Kconfig b/drivers/media/pci/ivtv/Kconfig index 06ca4e23f9fb..e96b3c182a2f 100644 --- a/drivers/media/pci/ivtv/Kconfig +++ b/drivers/media/pci/ivtv/Kconfig @@ -18,7 +18,7 @@ config VIDEO_IVTV select VIDEO_VP27SMPX select VIDEO_UPD64031A select VIDEO_UPD64083 - ---help--- + help This is a video4linux driver for Conexant cx23416 or cx23415 based PCI personal video recorder devices. @@ -32,7 +32,7 @@ config VIDEO_IVTV_DEPRECATED_IOCTLS bool "enable the DVB ioctls abuse on ivtv driver" depends on VIDEO_IVTV default n - ---help--- + help Enable the usage of the a DVB set of ioctls that were abused by IVTV driver for a while. @@ -45,7 +45,7 @@ config VIDEO_IVTV_ALSA tristate "Conexant cx23415/cx23416 ALSA interface for PCM audio capture" depends on VIDEO_IVTV && SND select SND_PCM - ---help--- + help This driver provides an ALSA interface as another method for user applications to obtain PCM audio data from Conexant cx23415/cx23416 based PCI TV cards supported by the ivtv driver. @@ -63,7 +63,7 @@ config VIDEO_FB_IVTV select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - ---help--- + help This is a framebuffer driver for the Conexant cx23415 MPEG encoder/decoder. @@ -77,7 +77,7 @@ config VIDEO_FB_IVTV_FORCE_PAT bool "force cx23415 framebuffer init with x86 PAT enabled" depends on VIDEO_FB_IVTV && X86_PAT default n - ---help--- + help With PAT enabled, the cx23415 framebuffer driver does not utilize write-combined caching on the framebuffer memory. For this reason, the driver will by default disable itself diff --git a/drivers/media/pci/meye/Kconfig b/drivers/media/pci/meye/Kconfig index 9a50f54231ad..ce0463c81886 100644 --- a/drivers/media/pci/meye/Kconfig +++ b/drivers/media/pci/meye/Kconfig @@ -2,7 +2,7 @@ config VIDEO_MEYE tristate "Sony Vaio Picturebook Motion Eye Video For Linux" depends on PCI && VIDEO_V4L2 depends on SONY_LAPTOP || COMPILE_TEST - ---help--- + help This is the video4linux driver for the Motion Eye camera found in the Vaio Picturebook laptops. Please read the material in for more information. diff --git a/drivers/media/pci/netup_unidvb/Kconfig b/drivers/media/pci/netup_unidvb/Kconfig index b663154d0cc4..60057585f04c 100644 --- a/drivers/media/pci/netup_unidvb/Kconfig +++ b/drivers/media/pci/netup_unidvb/Kconfig @@ -8,7 +8,7 @@ config DVB_NETUP_UNIDVB select DVB_HELENE if MEDIA_SUBDRV_AUTOSELECT select DVB_LNBH25 if MEDIA_SUBDRV_AUTOSELECT select DVB_CXD2841ER if MEDIA_SUBDRV_AUTOSELECT - ---help--- + help Support for NetUP PCI express Universal DVB card. Say Y when you want to support NetUP Dual Universal DVB card. diff --git a/drivers/media/pci/ngene/Kconfig b/drivers/media/pci/ngene/Kconfig index e06d019996f3..8a80a5bab8e9 100644 --- a/drivers/media/pci/ngene/Kconfig +++ b/drivers/media/pci/ngene/Kconfig @@ -15,6 +15,6 @@ config DVB_NGENE select DVB_STV6111 if MEDIA_SUBDRV_AUTOSELECT select DVB_LNBH25 if MEDIA_SUBDRV_AUTOSELECT select DVB_CXD2099 if MEDIA_SUBDRV_AUTOSELECT - ---help--- + help Support for Micronas PCI express cards with nGene bridge. diff --git a/drivers/media/pci/saa7134/Kconfig b/drivers/media/pci/saa7134/Kconfig index b44e0d70907e..8b28783b3fcd 100644 --- a/drivers/media/pci/saa7134/Kconfig +++ b/drivers/media/pci/saa7134/Kconfig @@ -7,7 +7,7 @@ config VIDEO_SAA7134 select CRC32 select VIDEO_SAA6588 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_SAA6752HS if MEDIA_SUBDRV_AUTOSELECT - ---help--- + help This is a video4linux driver for Philips SAA713x based TV cards. @@ -18,7 +18,7 @@ config VIDEO_SAA7134_ALSA tristate "Philips SAA7134 DMA audio support" depends on VIDEO_SAA7134 && SND select SND_PCM - ---help--- + help This is a video4linux driver for direct (DMA) audio in Philips SAA713x based TV cards using ALSA @@ -31,7 +31,7 @@ config VIDEO_SAA7134_RC depends on VIDEO_SAA7134 depends on !(RC_CORE=m && VIDEO_SAA7134=y) default y - ---help--- + help Enables Remote Controller support on saa7134 driver. config VIDEO_SAA7134_DVB @@ -57,7 +57,7 @@ config VIDEO_SAA7134_DVB select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT select DVB_ZL10039 if MEDIA_SUBDRV_AUTOSELECT - ---help--- + help This adds support for DVB cards based on the Philips saa7134 chip. @@ -68,6 +68,6 @@ config VIDEO_SAA7134_GO7007 tristate "go7007 support for saa7134 based TV cards" depends on VIDEO_SAA7134 depends on VIDEO_GO7007 - ---help--- + help Enables saa7134 driver support for boards with go7007 MPEG encoder (WIS Voyager or compatible). diff --git a/drivers/media/pci/saa7146/Kconfig b/drivers/media/pci/saa7146/Kconfig index da88b77a916c..60d9862580ff 100644 --- a/drivers/media/pci/saa7146/Kconfig +++ b/drivers/media/pci/saa7146/Kconfig @@ -2,7 +2,7 @@ config VIDEO_HEXIUM_GEMINI tristate "Hexium Gemini frame grabber" depends on PCI && VIDEO_V4L2 && I2C select VIDEO_SAA7146_VV - ---help--- + help This is a video4linux driver for the Hexium Gemini frame grabber card by Hexium. Please note that the Gemini Dual card is *not* fully supported. @@ -14,7 +14,7 @@ config VIDEO_HEXIUM_ORION tristate "Hexium HV-PCI6 and Orion frame grabber" depends on PCI && VIDEO_V4L2 && I2C select VIDEO_SAA7146_VV - ---help--- + help This is a video4linux driver for the Hexium HV-PCI6 and Orion frame grabber cards by Hexium. @@ -30,7 +30,7 @@ config VIDEO_MXB select VIDEO_TDA9840 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_TEA6415C if MEDIA_SUBDRV_AUTOSELECT select VIDEO_TEA6420 if MEDIA_SUBDRV_AUTOSELECT - ---help--- + help This is a video4linux driver for the 'Multimedia eXtension Board' TV card by Siemens-Nixdorf. diff --git a/drivers/media/pci/saa7164/Kconfig b/drivers/media/pci/saa7164/Kconfig index 9098ef5feca4..265c5a4fd823 100644 --- a/drivers/media/pci/saa7164/Kconfig +++ b/drivers/media/pci/saa7164/Kconfig @@ -8,7 +8,7 @@ config VIDEO_SAA7164 select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT - ---help--- + help This is a video4linux driver for NXP SAA7164 based TV cards. diff --git a/drivers/media/pci/solo6x10/Kconfig b/drivers/media/pci/solo6x10/Kconfig index d9e06a6bf1eb..2061d02a82d0 100644 --- a/drivers/media/pci/solo6x10/Kconfig +++ b/drivers/media/pci/solo6x10/Kconfig @@ -8,7 +8,7 @@ config VIDEO_SOLO6X10 select VIDEOBUF2_DMA_CONTIG select SND_PCM select FONT_8x16 - ---help--- + help This driver supports the Bluecherry H.264 and MPEG-4 hardware compression capture cards and other Softlogic-based ones. diff --git a/drivers/media/pci/tw5864/Kconfig b/drivers/media/pci/tw5864/Kconfig index 760fb11dfeae..e5d52f076232 100644 --- a/drivers/media/pci/tw5864/Kconfig +++ b/drivers/media/pci/tw5864/Kconfig @@ -2,7 +2,7 @@ config VIDEO_TW5864 tristate "Techwell TW5864 video/audio grabber and encoder" depends on VIDEO_DEV && PCI && VIDEO_V4L2 select VIDEOBUF2_DMA_CONTIG - ---help--- + help Support for boards based on Techwell TW5864 chip which provides multichannel video & audio grabbing and encoding (H.264, MJPEG, ADPCM G.726). diff --git a/drivers/media/pci/tw68/Kconfig b/drivers/media/pci/tw68/Kconfig index 95d5d5202048..4bfc4fa416e5 100644 --- a/drivers/media/pci/tw68/Kconfig +++ b/drivers/media/pci/tw68/Kconfig @@ -2,7 +2,7 @@ config VIDEO_TW68 tristate "Techwell tw68x Video For Linux" depends on VIDEO_DEV && PCI && VIDEO_V4L2 select VIDEOBUF2_DMA_SG - ---help--- + help Support for Techwell tw68xx based frame grabber boards. To compile this driver as a module, choose M here: the diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index 4acbed189644..1611ec23d733 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -6,7 +6,7 @@ menuconfig V4L_PLATFORM_DRIVERS bool "V4L platform devices" depends on MEDIA_CAMERA_SUPPORT default n - ---help--- + help Say Y here to enable support for platform-specific V4L drivers. if V4L_PLATFORM_DRIVERS @@ -55,7 +55,7 @@ config VIDEO_VIU depends on VIDEO_V4L2 && (PPC_MPC512x || COMPILE_TEST) && I2C select VIDEOBUF_DMA_CONTIG default y - ---help--- + help Support for Freescale VIU video driver. This device captures video data, or overlays video on DIU frame buffer. @@ -80,13 +80,13 @@ config VIDEO_OMAP3 select VIDEOBUF2_DMA_CONTIG select MFD_SYSCON select V4L2_FWNODE - ---help--- + help Driver for an OMAP 3 camera controller. config VIDEO_OMAP3_DEBUG bool "OMAP 3 Camera debug messages" depends on VIDEO_OMAP3 - ---help--- + help Enable debug messages on OMAP 3 camera controller driver. config VIDEO_PXA27x @@ -96,7 +96,7 @@ config VIDEO_PXA27x select VIDEOBUF2_DMA_SG select SG_SPLIT select V4L2_FWNODE - ---help--- + help This is a v4l2 driver for the PXA27x Quick Capture Interface config VIDEO_QCOM_CAMSS @@ -112,7 +112,7 @@ config VIDEO_S3C_CAMIF depends on PM depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG - ---help--- + help This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera host interface (CAMIF). @@ -125,7 +125,7 @@ config VIDEO_STM32_DCMI depends on ARCH_STM32 || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_FWNODE - ---help--- + help This module makes the STM32 Digital Camera Memory Interface (DCMI) available as a v4l2 device. @@ -138,7 +138,7 @@ config VIDEO_RENESAS_CEU depends on ARCH_SHMOBILE || ARCH_R7S72100 || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_FWNODE - ---help--- + help This is a v4l2 driver for the Renesas CEU Interface source "drivers/media/platform/exynos4-is/Kconfig" @@ -155,7 +155,7 @@ config VIDEO_TI_CAL select VIDEOBUF2_DMA_CONTIG select V4L2_FWNODE default n - ---help--- + help Support for the TI CAL (Camera Adaptation Layer) block found on DRA72X SoC. In TI Technical Reference Manual this module is referred as @@ -168,7 +168,7 @@ menuconfig V4L_MEM2MEM_DRIVERS depends on VIDEO_V4L2 depends on MEDIA_CAMERA_SUPPORT default n - ---help--- + help Say Y here to enable selecting drivers for V4L devices that use system memory for both source and destination buffers, as opposed to capture and output drivers, which use memory buffers for just @@ -184,7 +184,7 @@ config VIDEO_CODA select VIDEOBUF2_VMALLOC select V4L2_MEM2MEM_DEV select GENERIC_ALLOCATOR - ---help--- + help Coda is a range of video codec IPs that supports H.264, MPEG-4, and other video formats. @@ -207,7 +207,7 @@ config VIDEO_MEDIATEK_JPEG depends on ARCH_MEDIATEK || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV - ---help--- + help Mediatek jpeg codec driver provides HW capability to decode JPEG format @@ -218,7 +218,7 @@ config VIDEO_MEDIATEK_VPU tristate "Mediatek Video Processor Unit" depends on VIDEO_DEV && VIDEO_V4L2 depends on ARCH_MEDIATEK || COMPILE_TEST - ---help--- + help This driver provides downloading VPU firmware and communicating with VPU. This driver for hw video codec embedded in Mediatek's MT8173 SOCs. It is able @@ -236,7 +236,7 @@ config VIDEO_MEDIATEK_MDP select V4L2_MEM2MEM_DEV select VIDEO_MEDIATEK_VPU default n - ---help--- + help It is a v4l2 driver and present in Mediatek MT8173 SoCs. The driver supports for scaling and color space conversion. @@ -252,7 +252,7 @@ config VIDEO_MEDIATEK_VCODEC select V4L2_MEM2MEM_DEV select VIDEO_MEDIATEK_VPU default n - ---help--- + help Mediatek video codec driver provides HW capability to encode and decode in a range of video formats This driver rely on VPU driver to communicate with VPU. @@ -276,7 +276,7 @@ config VIDEO_SAMSUNG_S5P_G2D select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV default n - ---help--- + help This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D 2d graphics accelerator. @@ -286,7 +286,7 @@ config VIDEO_SAMSUNG_S5P_JPEG depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV - ---help--- + help This is a v4l2 driver for Samsung S5P, EXYNOS3250 and EXYNOS4 JPEG codec @@ -407,7 +407,7 @@ config VIDEO_RENESAS_FDP1 depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV - ---help--- + help This is a V4L2 driver for the Renesas Fine Display Processor providing colour space conversion, and de-interlacing features. @@ -420,7 +420,7 @@ config VIDEO_RENESAS_JPU depends on ARCH_RENESAS || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV - ---help--- + help This is a V4L2 driver for the Renesas JPEG Processing Unit. To compile this driver as a module, choose M here: the module @@ -430,7 +430,7 @@ config VIDEO_RENESAS_FCP tristate "Renesas Frame Compression Processor" depends on ARCH_RENESAS || COMPILE_TEST depends on OF - ---help--- + help This is a driver for the Renesas Frame Compression Processor (FCP). The FCP is a companion module of video processing modules in the Renesas R-Car Gen3 SoCs. It handles memory access for the codec, @@ -446,7 +446,7 @@ config VIDEO_RENESAS_VSP1 depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP select VIDEOBUF2_DMA_CONTIG select VIDEOBUF2_VMALLOC - ---help--- + help This is a V4L2 driver for the Renesas VSP1 video processing engine. To compile this driver as a module, choose M here: the module @@ -459,7 +459,7 @@ config VIDEO_ROCKCHIP_RGA select VIDEOBUF2_DMA_SG select V4L2_MEM2MEM_DEV default n - ---help--- + help This is a v4l2 driver for Rockchip SOC RGA 2d graphics accelerator. Rockchip RGA is a separate 2D raster graphic acceleration unit. It accelerates 2D graphics operations, such as point/line drawing, @@ -477,14 +477,14 @@ config VIDEO_TI_VPE select VIDEO_TI_SC select VIDEO_TI_CSC default n - ---help--- + help Support for the TI VPE(Video Processing Engine) block found on DRA7XX SoC. config VIDEO_TI_VPE_DEBUG bool "VPE debug messages" depends on VIDEO_TI_VPE - ---help--- + help Enable debug messages on VPE driver. config VIDEO_QCOM_VENUS @@ -495,7 +495,7 @@ config VIDEO_QCOM_VENUS select QCOM_SCM if ARCH_QCOM select VIDEOBUF2_DMA_SG select V4L2_MEM2MEM_DEV - ---help--- + help This is a V4L2 driver for Qualcomm Venus video accelerator hardware. It accelerates encoding and decoding operations on various Qualcomm SoCs. @@ -530,7 +530,7 @@ config VIDEO_VIM2M select VIDEOBUF2_VMALLOC select V4L2_MEM2MEM_DEV default n - ---help--- + help This is a virtual test device for the memory-to-memory driver framework. @@ -542,7 +542,7 @@ menuconfig DVB_PLATFORM_DRIVERS bool "DVB platform devices" depends on MEDIA_DIGITAL_TV_SUPPORT default n - ---help--- + help Say Y here to enable support for platform-specific Digital TV drivers. if DVB_PLATFORM_DRIVERS @@ -562,7 +562,7 @@ config VIDEO_CROS_EC_CEC select CEC_NOTIFIER select CHROME_PLATFORMS select CROS_EC_PROTO - ---help--- + help If you say yes here you will get support for the ChromeOS Embedded Controller's CEC. The CEC bus is present in the HDMI connector and enables communication @@ -573,7 +573,7 @@ config VIDEO_MESON_AO_CEC depends on ARCH_MESON || COMPILE_TEST select CEC_CORE select CEC_NOTIFIER - ---help--- + help This is a driver for Amlogic Meson SoCs AO CEC interface. It uses the generic CEC framework interface. CEC bus is present in the HDMI connector and enables communication @@ -584,7 +584,7 @@ config CEC_GPIO select CEC_CORE select CEC_PIN select GPIOLIB - ---help--- + help This is a generic GPIO-based CEC driver. The CEC bus is present in the HDMI connector and enables communication between compatible devices. @@ -594,7 +594,7 @@ config VIDEO_SAMSUNG_S5P_CEC depends on ARCH_EXYNOS || COMPILE_TEST select CEC_CORE select CEC_NOTIFIER - ---help--- + help This is a driver for Samsung S5P HDMI CEC interface. It uses the generic CEC framework interface. CEC bus is present in the HDMI connector and enables communication @@ -605,7 +605,7 @@ config VIDEO_STI_HDMI_CEC depends on ARCH_STI || COMPILE_TEST select CEC_CORE select CEC_NOTIFIER - ---help--- + help This is a driver for STIH4xx HDMI CEC interface. It uses the generic CEC framework interface. CEC bus is present in the HDMI connector and enables communication @@ -617,7 +617,7 @@ config VIDEO_STM32_HDMI_CEC select REGMAP select REGMAP_MMIO select CEC_CORE - ---help--- + help This is a driver for STM32 interface. It uses the generic CEC framework interface. CEC bus is present in the HDMI connector and enables communication @@ -628,7 +628,7 @@ config VIDEO_TEGRA_HDMI_CEC depends on ARCH_TEGRA || COMPILE_TEST select CEC_CORE select CEC_NOTIFIER - ---help--- + help This is a driver for the Tegra HDMI CEC interface. It uses the generic CEC framework interface. The CEC bus is present in the HDMI connector and enables communication @@ -662,7 +662,7 @@ menuconfig SDR_PLATFORM_DRIVERS bool "SDR platform devices" depends on MEDIA_SDR_SUPPORT default n - ---help--- + help Say Y here to enable support for platform-specific SDR Drivers. if SDR_PLATFORM_DRIVERS @@ -672,7 +672,7 @@ config VIDEO_RCAR_DRIF depends on VIDEO_V4L2 depends on ARCH_RENESAS || COMPILE_TEST select VIDEOBUF2_VMALLOC - ---help--- + help Say Y if you want to enable R-Car Gen3 DRIF support. DRIF is Digital Radio Interface that interfaces with an RF front end chip. It is a receiver of digital data which uses DMA to transfer received data to diff --git a/drivers/media/platform/atmel/Kconfig b/drivers/media/platform/atmel/Kconfig index a211ef20f77e..c3f6a47cdc0e 100644 --- a/drivers/media/platform/atmel/Kconfig +++ b/drivers/media/platform/atmel/Kconfig @@ -15,6 +15,6 @@ config VIDEO_ATMEL_ISI depends on ARCH_AT91 || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_FWNODE - ---help--- + help This module makes the ATMEL Image Sensor Interface available as a v4l2 device. diff --git a/drivers/media/platform/marvell-ccic/Kconfig b/drivers/media/platform/marvell-ccic/Kconfig index cf12e077203a..cd88e2eed749 100644 --- a/drivers/media/platform/marvell-ccic/Kconfig +++ b/drivers/media/platform/marvell-ccic/Kconfig @@ -5,7 +5,7 @@ config VIDEO_CAFE_CCIC select VIDEOBUF2_VMALLOC select VIDEOBUF2_DMA_CONTIG select VIDEOBUF2_DMA_SG - ---help--- + help This is a video4linux2 driver for the Marvell 88ALP01 integrated CMOS camera controller. This is the controller found on first- generation OLPC systems. @@ -19,7 +19,7 @@ config VIDEO_MMP_CAMERA select VIDEOBUF2_VMALLOC select VIDEOBUF2_DMA_CONTIG select VIDEOBUF2_DMA_SG - ---help--- + help This is a Video4Linux2 driver for the integrated camera controller found on Marvell Armada 610 application processors (and likely beyond). This is the controller found diff --git a/drivers/media/platform/omap/Kconfig b/drivers/media/platform/omap/Kconfig index 4b5e55d41ad4..30ce2ba120a1 100644 --- a/drivers/media/platform/omap/Kconfig +++ b/drivers/media/platform/omap/Kconfig @@ -14,5 +14,5 @@ config VIDEO_OMAP2_VOUT select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3 select FRAME_VECTOR default n - ---help--- + help V4L2 Display driver support for OMAP2/3 based boards. diff --git a/drivers/media/platform/rcar-vin/Kconfig b/drivers/media/platform/rcar-vin/Kconfig index e3eb8fee2536..2433ec960010 100644 --- a/drivers/media/platform/rcar-vin/Kconfig +++ b/drivers/media/platform/rcar-vin/Kconfig @@ -17,7 +17,7 @@ config VIDEO_RCAR_VIN depends on ARCH_RENESAS || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_FWNODE - ---help--- + help Support for Renesas R-Car Video Input (VIN) driver. Supports R-Car Gen2 and Gen3 SoCs. diff --git a/drivers/media/platform/sti/c8sectpfe/Kconfig b/drivers/media/platform/sti/c8sectpfe/Kconfig index 7420a50572d3..93eaabfd5437 100644 --- a/drivers/media/platform/sti/c8sectpfe/Kconfig +++ b/drivers/media/platform/sti/c8sectpfe/Kconfig @@ -12,7 +12,7 @@ config DVB_C8SECTPFE select DVB_STV0367 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_TDA18212 if MEDIA_SUBDRV_AUTOSELECT - ---help--- + help This adds support for DVB front-end cards connected to TS inputs of STiH407/410 SoC. diff --git a/drivers/media/platform/vimc/Kconfig b/drivers/media/platform/vimc/Kconfig index 71c9fe7d3370..1de9bc9aa49b 100644 --- a/drivers/media/platform/vimc/Kconfig +++ b/drivers/media/platform/vimc/Kconfig @@ -4,7 +4,7 @@ config VIDEO_VIMC select VIDEOBUF2_VMALLOC select VIDEO_V4L2_TPG default n - ---help--- + help Skeleton driver for Virtual Media Controller This driver can be compared to the vivid driver for emulating diff --git a/drivers/media/platform/vivid/Kconfig b/drivers/media/platform/vivid/Kconfig index 154de92dd809..4b51d4d6cf93 100644 --- a/drivers/media/platform/vivid/Kconfig +++ b/drivers/media/platform/vivid/Kconfig @@ -11,7 +11,7 @@ config VIDEO_VIVID select VIDEOBUF2_DMA_CONTIG select VIDEO_V4L2_TPG default n - ---help--- + help Enables a virtual video driver. This driver emulates a webcam, TV, S-Video and HDMI capture hardware, including VBI support for the SDTV inputs. Also video output, VBI output, radio receivers, @@ -28,7 +28,7 @@ config VIDEO_VIVID_CEC bool "Enable CEC emulation support" depends on VIDEO_VIVID select CEC_CORE - ---help--- + help When selected the vivid module will emulate the optional HDMI CEC feature. @@ -36,6 +36,6 @@ config VIDEO_VIVID_MAX_DEVS int "Maximum number of devices" depends on VIDEO_VIVID default "64" - ---help--- + help This allows you to specify the maximum number of devices supported by the vivid driver. diff --git a/drivers/media/platform/xilinx/Kconfig b/drivers/media/platform/xilinx/Kconfig index 74ec8aaa5ae0..a2773ad7c185 100644 --- a/drivers/media/platform/xilinx/Kconfig +++ b/drivers/media/platform/xilinx/Kconfig @@ -5,7 +5,7 @@ config VIDEO_XILINX depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && OF && HAS_DMA select VIDEOBUF2_DMA_CONTIG select V4L2_FWNODE - ---help--- + help Driver for Xilinx Video IP Pipelines if VIDEO_XILINX @@ -14,13 +14,13 @@ config VIDEO_XILINX_TPG tristate "Xilinx Video Test Pattern Generator" depends on VIDEO_XILINX select VIDEO_XILINX_VTC - ---help--- + help Driver for the Xilinx Video Test Pattern Generator config VIDEO_XILINX_VTC tristate "Xilinx Video Timing Controller" depends on VIDEO_XILINX - ---help--- + help Driver for the Xilinx Video Timing Controller endif #VIDEO_XILINX diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index 9b99dfb2d0c6..9cd00f64af32 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -7,7 +7,7 @@ menuconfig RADIO_ADAPTERS depends on VIDEO_V4L2 depends on MEDIA_RADIO_SUPPORT default y - ---help--- + help Say Y here to enable selecting AM/FM radio adapters. if RADIO_ADAPTERS && VIDEO_V4L2 @@ -29,7 +29,7 @@ config RADIO_SI476X depends on MFD_SI476X_CORE depends on SND_SOC select SND_SOC_SI476X - ---help--- + help Choose Y here if you have this FM radio chip. In order to control your radio card, you will need to use programs @@ -43,7 +43,7 @@ config RADIO_SI476X config USB_MR800 tristate "AverMedia MR 800 USB FM radio support" depends on USB && VIDEO_V4L2 - ---help--- + help Say Y here if you want to connect this type of radio to your computer's USB port. Note that the audio is not digital, and you must connect the line out connector to a sound card or a @@ -55,7 +55,7 @@ config USB_MR800 config USB_DSBR tristate "D-Link/GemTek USB FM radio support" depends on USB && VIDEO_V4L2 - ---help--- + help Say Y here if you want to connect this type of radio to your computer's USB port. Note that the audio is not digital, and you must connect the line out connector to a sound card or a @@ -68,7 +68,7 @@ config RADIO_MAXIRADIO tristate "Guillemot MAXI Radio FM 2000 radio" depends on VIDEO_V4L2 && PCI select RADIO_TEA575X - ---help--- + help Choose Y here if you have this radio card. This card may also be found as Gemtek PCI FM. @@ -84,7 +84,7 @@ config RADIO_SHARK tristate "Griffin radioSHARK USB radio receiver" depends on USB select RADIO_TEA575X - ---help--- + help Choose Y here if you have this radio receiver. There are 2 versions of this device, this driver is for version 1, @@ -101,7 +101,7 @@ config RADIO_SHARK config RADIO_SHARK2 tristate "Griffin radioSHARK2 USB radio receiver" depends on USB - ---help--- + help Choose Y here if you have this radio receiver. There are 2 versions of this device, this driver is for version 2, @@ -118,7 +118,7 @@ config RADIO_SHARK2 config USB_KEENE tristate "Keene FM Transmitter USB support" depends on USB && VIDEO_V4L2 - ---help--- + help Say Y here if you want to connect this type of FM transmitter to your computer's USB port. @@ -128,7 +128,7 @@ config USB_KEENE config USB_RAREMONO tristate "Thanko's Raremono AM/FM/SW radio support" depends on USB && VIDEO_V4L2 - ---help--- + help The 'Thanko's Raremono' device contains the Si4734 chip from Silicon Labs Inc. It is one of the very few or perhaps the only consumer USB radio device to receive the AM/FM/SW bands. @@ -142,7 +142,7 @@ config USB_RAREMONO config USB_MA901 tristate "Masterkit MA901 USB FM radio support" depends on USB && VIDEO_V4L2 - ---help--- + help Say Y here if you want to connect this type of radio to your computer's USB port. Note that the audio is not digital, and you must connect the line out connector to a sound card or a @@ -154,7 +154,7 @@ config USB_MA901 config RADIO_TEA5764 tristate "TEA5764 I2C FM radio support" depends on I2C && VIDEO_V4L2 - ---help--- + help Say Y here if you want to use the TEA5764 FM chip found in EZX phones. This FM chip is present in EZX phones from Motorola, connected to internal pxa I2C bus. @@ -173,7 +173,7 @@ config RADIO_TEA5764_XTAL config RADIO_SAA7706H tristate "SAA7706H Car Radio DSP" depends on I2C && VIDEO_V4L2 - ---help--- + help Say Y here if you want to use the SAA7706H Car radio Digital Signal Processor, found for instance on the Russellville development board. On the russellville the device is connected to internal @@ -185,7 +185,7 @@ config RADIO_SAA7706H config RADIO_TEF6862 tristate "TEF6862 Car Radio Enhanced Selectivity Tuner" depends on I2C && VIDEO_V4L2 - ---help--- + help Say Y here if you want to use the TEF6862 Car Radio Enhanced Selectivity Tuner, found for instance on the Russellville development board. On the russellville the device is connected to internal @@ -200,7 +200,7 @@ config RADIO_TIMBERDALE depends on I2C # for RADIO_SAA7706H select RADIO_TEF6862 select RADIO_SAA7706H - ---help--- + help This is a kind of umbrella driver for the Radio Tuner and DSP found behind the Timberdale FPGA on the Russellville board. Enabling this driver will automatically select the DSP and tuner. @@ -211,7 +211,7 @@ config RADIO_WL1273 select MFD_CORE select MFD_WL1273_CORE select FW_LOADER - ---help--- + help Choose Y here if you have this FM radio chip. In order to control your radio card, you will need to use programs @@ -233,7 +233,7 @@ menuconfig V4L_RADIO_ISA_DRIVERS bool "ISA radio devices" depends on ISA || COMPILE_TEST default n - ---help--- + help Say Y here to enable support for these ISA drivers. if V4L_RADIO_ISA_DRIVERS @@ -246,7 +246,7 @@ config RADIO_CADET tristate "ADS Cadet AM/FM Tuner" depends on ISA || COMPILE_TEST depends on VIDEO_V4L2 - ---help--- + help Choose Y here if you have one of these AM/FM radio cards, and then fill in the port address below. @@ -258,7 +258,7 @@ config RADIO_RTRACK depends on ISA || COMPILE_TEST depends on VIDEO_V4L2 select RADIO_ISA - ---help--- + help Choose Y here if you have one of these FM radio cards, and then fill in the port address below. @@ -290,7 +290,7 @@ config RADIO_RTRACK2 depends on ISA || COMPILE_TEST depends on VIDEO_V4L2 select RADIO_ISA - ---help--- + help Choose Y here if you have this FM radio card, and then fill in the port address below. @@ -314,7 +314,7 @@ config RADIO_AZTECH depends on ISA || COMPILE_TEST depends on VIDEO_V4L2 select RADIO_ISA - ---help--- + help Choose Y here if you have one of these FM radio cards, and then fill in the port address below. @@ -335,7 +335,7 @@ config RADIO_GEMTEK depends on ISA || COMPILE_TEST depends on VIDEO_V4L2 select RADIO_ISA - ---help--- + help Choose Y here if you have this FM radio card, and then fill in the I/O port address and settings below. The following cards either have GemTek Radio tuner or are rebranded GemTek Radio cards: @@ -377,7 +377,7 @@ config RADIO_MIROPCM20 depends on ISA_DMA_API && VIDEO_V4L2 && SND select SND_ISA select SND_MIRO - ---help--- + help Choose Y here if you have this FM radio card. You also need to enable the ALSA sound system. This choice automatically selects the ALSA sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this @@ -390,7 +390,7 @@ config RADIO_SF16FMI tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio" depends on ISA || COMPILE_TEST depends on VIDEO_V4L2 - ---help--- + help Choose Y here if you have one of these FM radio cards. To compile this driver as a module, choose M here: the @@ -401,7 +401,7 @@ config RADIO_SF16FMR2 depends on ISA || COMPILE_TEST depends on VIDEO_V4L2 select RADIO_TEA575X - ---help--- + help Choose Y here if you have one of these FM radio cards. To compile this driver as a module, choose M here: the @@ -412,7 +412,7 @@ config RADIO_TERRATEC depends on ISA || COMPILE_TEST depends on VIDEO_V4L2 select RADIO_ISA - ---help--- + help Choose Y here if you have this FM radio card. Note: this driver hasn't been tested since a long time due to lack @@ -451,7 +451,7 @@ config RADIO_TYPHOON depends on ISA || COMPILE_TEST depends on VIDEO_V4L2 select RADIO_ISA - ---help--- + help Choose Y here if you have one of these FM radio cards, and then fill in the port address and the frequency used for muting below. @@ -486,7 +486,7 @@ config RADIO_ZOLTRIX depends on ISA || COMPILE_TEST depends on VIDEO_V4L2 select RADIO_ISA - ---help--- + help Choose Y here if you have one of these FM radio cards, and then fill in the port address below. diff --git a/drivers/media/radio/si470x/Kconfig b/drivers/media/radio/si470x/Kconfig index 6dbb158cd2a0..21026488de90 100644 --- a/drivers/media/radio/si470x/Kconfig +++ b/drivers/media/radio/si470x/Kconfig @@ -1,7 +1,7 @@ config RADIO_SI470X tristate "Silicon Labs Si470x FM Radio Receiver support" depends on VIDEO_V4L2 - ---help--- + help This is a driver for devices with the Silicon Labs SI470x chip (either via USB or I2C buses). @@ -15,7 +15,7 @@ config RADIO_SI470X config USB_SI470X tristate "Silicon Labs Si470x FM Radio Receiver support with USB" depends on USB && RADIO_SI470X - ---help--- + help This is a driver for USB devices with the Silicon Labs SI470x chip. Currently these devices are known to work: - 10c4:818a: Silicon Labs USB FM Radio Reference Design @@ -40,7 +40,7 @@ config USB_SI470X config I2C_SI470X tristate "Silicon Labs Si470x FM Radio Receiver support with I2C" depends on I2C && RADIO_SI470X - ---help--- + help This is a driver for I2C devices with the Silicon Labs SI470x chip. diff --git a/drivers/media/radio/si4713/Kconfig b/drivers/media/radio/si4713/Kconfig index 9c8b887cff75..17567c917554 100644 --- a/drivers/media/radio/si4713/Kconfig +++ b/drivers/media/radio/si4713/Kconfig @@ -2,7 +2,7 @@ config USB_SI4713 tristate "Silicon Labs Si4713 FM Radio Transmitter support with USB" depends on USB && I2C && RADIO_SI4713 select I2C_SI4713 - ---help--- + help This is a driver for USB devices with the Silicon Labs SI4713 chip. Currently these devices are known to work. - 10c4:8244: Silicon Labs FM Transmitter USB device. @@ -17,7 +17,7 @@ config PLATFORM_SI4713 tristate "Silicon Labs Si4713 FM Radio Transmitter support with I2C" depends on I2C && RADIO_SI4713 select I2C_SI4713 - ---help--- + help This is a driver for I2C devices with the Silicon Labs SI4713 chip. @@ -30,7 +30,7 @@ config PLATFORM_SI4713 config I2C_SI4713 tristate "Silicon Labs Si4713 FM Radio Transmitter support" depends on I2C && RADIO_SI4713 - ---help--- + help Say Y here if you want support to Si4713 FM Radio Transmitter. This device can transmit audio through FM. It can transmit RDS and RBDS signals as well. This module is the v4l2 radio diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig index 96ce3e5524e0..3fc6ac15c66d 100644 --- a/drivers/media/rc/Kconfig +++ b/drivers/media/rc/Kconfig @@ -2,7 +2,7 @@ menuconfig RC_CORE tristate "Remote Controller support" depends on INPUT - ---help--- + help Enable support for Remote Controllers on Linux. This is needed in order to support several video capture adapters, standalone IR receivers/transmitters, and RF receivers. @@ -19,7 +19,7 @@ source "drivers/media/rc/keymaps/Kconfig" config LIRC bool "LIRC user interface" depends on RC_CORE - ---help--- + help Enable this option to enable the Linux Infrared Remote Control user interface (e.g. /dev/lirc*). This interface passes raw IR to and from userspace, which is needed for @@ -48,7 +48,7 @@ config IR_NEC_DECODER depends on RC_CORE select BITREVERSE - ---help--- + help Enable this option if you have IR with NEC protocol, and if the IR is decoded in software @@ -57,7 +57,7 @@ config IR_RC5_DECODER depends on RC_CORE select BITREVERSE - ---help--- + help Enable this option if you have IR with RC-5 protocol, and if the IR is decoded in software @@ -66,7 +66,7 @@ config IR_RC6_DECODER depends on RC_CORE select BITREVERSE - ---help--- + help Enable this option if you have an infrared remote control which uses the RC6 protocol, and you need software decoding support. @@ -75,7 +75,7 @@ config IR_JVC_DECODER depends on RC_CORE select BITREVERSE - ---help--- + help Enable this option if you have an infrared remote control which uses the JVC protocol, and you need software decoding support. @@ -84,7 +84,7 @@ config IR_SONY_DECODER depends on RC_CORE select BITREVERSE - ---help--- + help Enable this option if you have an infrared remote control which uses the Sony protocol, and you need software decoding support. @@ -92,7 +92,7 @@ config IR_SANYO_DECODER tristate "Enable IR raw decoder for the Sanyo protocol" depends on RC_CORE - ---help--- + help Enable this option if you have an infrared remote control which uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes), and you need software decoding support. @@ -101,7 +101,7 @@ config IR_SHARP_DECODER tristate "Enable IR raw decoder for the Sharp protocol" depends on RC_CORE - ---help--- + help Enable this option if you have an infrared remote control which uses the Sharp protocol (Sharp, Denon), and you need software decoding support. @@ -111,7 +111,7 @@ config IR_MCE_KBD_DECODER depends on RC_CORE select BITREVERSE - ---help--- + help Enable this option if you have a Microsoft Remote Keyboard for Windows Media Center Edition, which you would like to use with a raw IR receiver in your system. @@ -121,14 +121,14 @@ config IR_XMP_DECODER depends on RC_CORE select BITREVERSE - ---help--- + help Enable this option if you have IR with XMP protocol, and if the IR is decoded in software config IR_IMON_DECODER tristate "Enable IR raw decoder for the iMON protocol" depends on RC_CORE - ---help--- + help Enable this option if you have iMON PAD or Antec Veris infrared remote control and you would like to use it with a raw IR receiver, or if you wish to use an encoder to transmit this IR. @@ -177,7 +177,7 @@ config IR_ENE tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)" depends on PNP || COMPILE_TEST depends on RC_CORE - ---help--- + help Say Y here to enable support for integrated infrared receiver /transceiver made by ENE. @@ -203,7 +203,7 @@ config IR_IMON depends on USB_ARCH_HAS_HCD depends on RC_CORE select USB - ---help--- + help Say Y here if you want to use a SoundGraph iMON (aka Antec Veris) IR Receiver and/or LCD/VFD/VGA display. @@ -215,7 +215,7 @@ config IR_IMON_RAW depends on USB_ARCH_HAS_HCD depends on RC_CORE select USB - ---help--- + help Say Y here if you want to use a SoundGraph iMON IR Receiver, early raw models. @@ -227,7 +227,7 @@ config IR_MCEUSB depends on USB_ARCH_HAS_HCD depends on RC_CORE select USB - ---help--- + help Say Y here if you want to use a Windows Media Center Edition eHome Infrared Transceiver. @@ -238,7 +238,7 @@ config IR_ITE_CIR tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver" depends on PNP || COMPILE_TEST depends on RC_CORE - ---help--- + help Say Y here to enable support for integrated infrared receivers /transceivers made by ITE Tech Inc. These are found in several ASUS devices, like the ASUS Digimatrix or the ASUS @@ -251,7 +251,7 @@ config IR_FINTEK tristate "Fintek Consumer Infrared Transceiver" depends on PNP || COMPILE_TEST depends on RC_CORE - ---help--- + help Say Y here to enable support for integrated infrared receiver /transceiver made by Fintek. This chip is found on assorted Jetway motherboards (and of course, possibly others). @@ -263,7 +263,7 @@ config IR_MESON tristate "Amlogic Meson IR remote receiver" depends on RC_CORE depends on ARCH_MESON || COMPILE_TEST - ---help--- + help Say Y if you want to use the IR remote receiver available on Amlogic Meson SoCs. @@ -274,7 +274,7 @@ config IR_MTK tristate "Mediatek IR remote receiver" depends on RC_CORE depends on ARCH_MEDIATEK || COMPILE_TEST - ---help--- + help Say Y if you want to use the IR remote receiver available on Mediatek SoCs. @@ -285,7 +285,7 @@ config IR_NUVOTON tristate "Nuvoton w836x7hg Consumer Infrared Transceiver" depends on PNP || COMPILE_TEST depends on RC_CORE - ---help--- + help Say Y here to enable support for integrated infrared receiver /transceiver made by Nuvoton (formerly Winbond). This chip is found in the ASRock ION 330HT, as well as assorted Intel @@ -301,7 +301,7 @@ config IR_REDRAT3 select NEW_LEDS select LEDS_CLASS select USB - ---help--- + help Say Y here if you want to use a RedRat3 Infrared Transceiver. To compile this driver as a module, choose M here: the @@ -311,7 +311,7 @@ config IR_SPI tristate "SPI connected IR LED" depends on SPI && LIRC depends on OF || COMPILE_TEST - ---help--- + help Say Y if you want to use an IR LED connected through SPI bus. To compile this driver as a module, choose M here: the module will be @@ -322,7 +322,7 @@ config IR_STREAMZAP depends on USB_ARCH_HAS_HCD depends on RC_CORE select USB - ---help--- + help Say Y here if you want to use a Streamzap PC Remote Infrared Receiver. @@ -336,7 +336,7 @@ config IR_WINBOND_CIR select NEW_LEDS select LEDS_CLASS select BITREVERSE - ---help--- + help Say Y here if you want to use the IR remote functionality found in some Winbond SuperI/O chips. Currently only the WPCD376I chip is supported (included in some Intel Media series @@ -350,7 +350,7 @@ config IR_IGORPLUGUSB depends on USB_ARCH_HAS_HCD depends on RC_CORE select USB - ---help--- + help Say Y here if you want to use the IgorPlug-USB IR Receiver by Igor Cesko. This device is included on the Fit-PC2. @@ -365,7 +365,7 @@ config IR_IGUANA depends on USB_ARCH_HAS_HCD depends on RC_CORE select USB - ---help--- + help Say Y here if you want to use the IguanaWorks USB IR Transceiver. Both infrared receive and send are supported. If you want to change the ID or the pin config, use the user space driver from @@ -383,7 +383,7 @@ config IR_TTUSBIR select USB select NEW_LEDS select LEDS_CLASS - ---help--- + help Say Y here if you want to use the TechnoTrend USB IR Receiver. The driver can control the led. @@ -393,7 +393,7 @@ config IR_TTUSBIR config IR_RX51 tristate "Nokia N900 IR transmitter diode" depends on (OMAP_DM_TIMER && PWM_OMAP_DMTIMER && ARCH_OMAP2PLUS || COMPILE_TEST) && RC_CORE - ---help--- + help Say Y or M here if you want to enable support for the IR transmitter diode built in the Nokia N900 (RX51) device. @@ -405,7 +405,7 @@ source "drivers/media/rc/img-ir/Kconfig" config RC_LOOPBACK tristate "Remote Control Loopback Driver" depends on RC_CORE - ---help--- + help Say Y here if you want support for the remote control loopback driver which allows TX data to be sent back as RX data. This is mostly useful for debugging purposes. @@ -419,7 +419,7 @@ config IR_GPIO_CIR tristate "GPIO IR remote control" depends on RC_CORE depends on (OF && GPIOLIB) || COMPILE_TEST - ---help--- + help Say Y if you want to use GPIO based IR Receiver. To compile this driver as a module, choose M here: the module will @@ -430,7 +430,7 @@ config IR_GPIO_TX depends on RC_CORE depends on LIRC depends on (OF && GPIOLIB) || COMPILE_TEST - ---help--- + help Say Y if you want to a GPIO based IR transmitter. This is a bit banging driver. @@ -443,7 +443,7 @@ config IR_PWM_TX depends on LIRC depends on PWM depends on OF || COMPILE_TEST - ---help--- + help Say Y if you want to use a PWM based IR transmitter. This is more power efficient than the bit banging gpio driver. @@ -454,7 +454,7 @@ config RC_ST tristate "ST remote control receiver" depends on RC_CORE depends on ARCH_STI || COMPILE_TEST - ---help--- + help Say Y here if you want support for ST remote control driver which allows both IR and UHF RX. The driver passes raw pulse and space information to the LIRC decoder. @@ -465,7 +465,7 @@ config IR_SUNXI tristate "SUNXI IR remote control" depends on RC_CORE depends on ARCH_SUNXI || COMPILE_TEST - ---help--- + help Say Y if you want to use sunXi internal IR Controller To compile this driver as a module, choose M here: the module will @@ -474,7 +474,7 @@ config IR_SUNXI config IR_SERIAL tristate "Homebrew Serial Port Receiver" depends on RC_CORE - ---help--- + help Say Y if you want to use Homebrew Serial Port Receivers and Transceivers. @@ -484,13 +484,13 @@ config IR_SERIAL config IR_SERIAL_TRANSMITTER bool "Serial Port Transmitter" depends on IR_SERIAL - ---help--- + help Serial Port Transmitter support config IR_SIR tristate "Built-in SIR IrDA port" depends on RC_CORE - ---help--- + help Say Y if you want to use a IrDA SIR port Transceivers. To compile this driver as a module, choose M here: the module will @@ -500,7 +500,7 @@ config IR_TANGO tristate "Sigma Designs SMP86xx IR decoder" depends on RC_CORE depends on ARCH_TANGO || COMPILE_TEST - ---help--- + help Adds support for the HW IR decoder embedded on Sigma Designs Tango-based systems (SMP86xx, SMP87xx). The HW decoder supports NEC, RC-5, RC-6 IR protocols. @@ -522,7 +522,7 @@ config IR_ZX tristate "ZTE ZX IR remote control" depends on RC_CORE depends on ARCH_ZX || COMPILE_TEST - ---help--- + help Say Y if you want to use the IR remote control available on ZTE ZX family SoCs. diff --git a/drivers/media/rc/keymaps/Kconfig b/drivers/media/rc/keymaps/Kconfig index 767423bbbdd0..f459096d8e9c 100644 --- a/drivers/media/rc/keymaps/Kconfig +++ b/drivers/media/rc/keymaps/Kconfig @@ -3,7 +3,7 @@ config RC_MAP depends on RC_CORE default y - ---help--- + help This option enables the compilation of lots of Remote Controller tables. They are short tables, but if you don't use a remote controller, or prefer to load the diff --git a/drivers/media/spi/Kconfig b/drivers/media/spi/Kconfig index b07ac86fc53c..df169ecf0c27 100644 --- a/drivers/media/spi/Kconfig +++ b/drivers/media/spi/Kconfig @@ -6,7 +6,7 @@ menu "SPI helper chips" config VIDEO_GS1662 tristate "Gennum Serializers video" depends on SPI && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API - ---help--- + help Enable the GS1662 driver which serializes video streams. endmenu diff --git a/drivers/media/usb/airspy/Kconfig b/drivers/media/usb/airspy/Kconfig index 10b204cf4dbc..67578511bb9a 100644 --- a/drivers/media/usb/airspy/Kconfig +++ b/drivers/media/usb/airspy/Kconfig @@ -2,7 +2,7 @@ config USB_AIRSPY tristate "AirSpy" depends on VIDEO_V4L2 select VIDEOBUF2_VMALLOC - ---help--- + help This is a video4linux2 driver for AirSpy SDR device. To compile this driver as a module, choose M here: the diff --git a/drivers/media/usb/au0828/Kconfig b/drivers/media/usb/au0828/Kconfig index 65fc067eb864..ab4092bdff69 100644 --- a/drivers/media/usb/au0828/Kconfig +++ b/drivers/media/usb/au0828/Kconfig @@ -9,7 +9,7 @@ config VIDEO_AU0828 select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT - ---help--- + help This is a hybrid analog/digital tv capture driver for Auvitek's AU0828 USB device. @@ -23,7 +23,7 @@ config VIDEO_AU0828_V4L2 select DVB_AU8522_V4L if MEDIA_SUBDRV_AUTOSELECT select VIDEO_TUNER default y - ---help--- + help This is a video4linux driver for Auvitek's USB device. Choose Y here to include support for v4l2 analog video @@ -34,5 +34,5 @@ config VIDEO_AU0828_RC depends on RC_CORE depends on !(RC_CORE=m && VIDEO_AU0828=y) depends on VIDEO_AU0828 - ---help--- + help Enables Remote Controller support on au0828 driver. diff --git a/drivers/media/usb/cpia2/Kconfig b/drivers/media/usb/cpia2/Kconfig index 66e9283f5993..7029a04f3ffd 100644 --- a/drivers/media/usb/cpia2/Kconfig +++ b/drivers/media/usb/cpia2/Kconfig @@ -1,7 +1,7 @@ config VIDEO_CPIA2 tristate "CPiA2 Video For Linux" depends on VIDEO_DEV && USB && VIDEO_V4L2 - ---help--- + help This is the video4linux driver for cameras based on Vision's CPiA2 (Colour Processor Interface ASIC), such as the Digital Blue QX5 Microscope. If you have one of these cameras, say Y here diff --git a/drivers/media/usb/cx231xx/Kconfig b/drivers/media/usb/cx231xx/Kconfig index 9e5b3e7c3ef5..9262d0d7439a 100644 --- a/drivers/media/usb/cx231xx/Kconfig +++ b/drivers/media/usb/cx231xx/Kconfig @@ -7,7 +7,7 @@ config VIDEO_CX231XX select VIDEO_CX25840 select VIDEO_CX2341X - ---help--- + help This is a video4linux driver for Conexant 231xx USB based TV cards. To compile this driver as a module, choose M here: the @@ -18,7 +18,7 @@ config VIDEO_CX231XX_RC depends on RC_CORE=y || RC_CORE=VIDEO_CX231XX depends on VIDEO_CX231XX default y - ---help--- + help cx231xx hardware has a builtin RX/TX support. However, a few designs opted to not use it, but, instead, some other hardware. This module enables the usage of those other hardware, like the @@ -31,7 +31,7 @@ config VIDEO_CX231XX_ALSA depends on VIDEO_CX231XX && SND select SND_PCM - ---help--- + help This is an ALSA driver for Cx231xx USB based TV cards. To compile this driver as a module, choose M here: the @@ -52,6 +52,6 @@ config VIDEO_CX231XX_DVB select DVB_MN88473 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_R820T if MEDIA_SUBDRV_AUTOSELECT - ---help--- + help This adds support for DVB cards based on the Conexant cx231xx chips. diff --git a/drivers/media/usb/em28xx/Kconfig b/drivers/media/usb/em28xx/Kconfig index 451e076525d3..639da7e24066 100644 --- a/drivers/media/usb/em28xx/Kconfig +++ b/drivers/media/usb/em28xx/Kconfig @@ -13,7 +13,7 @@ config VIDEO_EM28XX_V4L2 select VIDEO_MSP3400 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_MT9V011 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_CAMERA_SUPPORT select VIDEO_OV2640 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_CAMERA_SUPPORT - ---help--- + help This is a video4linux driver for Empia 28xx based TV cards. To compile this driver as a module, choose M here: the @@ -23,7 +23,7 @@ config VIDEO_EM28XX_ALSA depends on VIDEO_EM28XX && SND select SND_PCM tristate "Empia EM28xx ALSA audio module" - ---help--- + help This is an ALSA driver for some Empia 28xx based TV cards. This is not required for em2800/em2820/em2821 boards. However, @@ -66,7 +66,7 @@ config VIDEO_EM28XX_DVB select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT - ---help--- + help This adds support for DVB cards based on the Empiatech em28xx chips. @@ -76,5 +76,5 @@ config VIDEO_EM28XX_RC depends on VIDEO_EM28XX depends on !(RC_CORE=m && VIDEO_EM28XX=y) default VIDEO_EM28XX - ---help--- + help Enables Remote Controller support on em28xx driver. diff --git a/drivers/media/usb/go7007/Kconfig b/drivers/media/usb/go7007/Kconfig index af1d02430931..beab257c092f 100644 --- a/drivers/media/usb/go7007/Kconfig +++ b/drivers/media/usb/go7007/Kconfig @@ -13,7 +13,7 @@ config VIDEO_GO7007 select VIDEO_TW9906 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_OV7640 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_CAMERA_SUPPORT select VIDEO_UDA1342 if MEDIA_SUBDRV_AUTOSELECT - ---help--- + help This is a video4linux driver for the WIS GO7007 MPEG encoder chip. @@ -23,7 +23,7 @@ config VIDEO_GO7007 config VIDEO_GO7007_USB tristate "WIS GO7007 USB support" depends on VIDEO_GO7007 && USB - ---help--- + help This is a video4linux driver for the WIS GO7007 MPEG encoder chip over USB. @@ -34,7 +34,7 @@ config VIDEO_GO7007_LOADER tristate "WIS GO7007 Loader support" depends on VIDEO_GO7007 default y - ---help--- + help This is a go7007 firmware loader driver for the WIS GO7007 MPEG encoder chip over USB. @@ -44,7 +44,7 @@ config VIDEO_GO7007_LOADER config VIDEO_GO7007_USB_S2250_BOARD tristate "Sensoray 2250/2251 support" depends on VIDEO_GO7007_USB && USB - ---help--- + help This is a video4linux driver for the Sensoray 2250/2251 device. To compile this driver as a module, choose M here: the diff --git a/drivers/media/usb/gspca/Kconfig b/drivers/media/usb/gspca/Kconfig index 088566e88467..0e6f36cb46e6 100644 --- a/drivers/media/usb/gspca/Kconfig +++ b/drivers/media/usb/gspca/Kconfig @@ -4,7 +4,7 @@ menuconfig USB_GSPCA depends on INPUT || INPUT=n select VIDEOBUF2_VMALLOC default m - ---help--- + help Say Y here if you want to enable selecting webcams based on the GSPCA framework. diff --git a/drivers/media/usb/hackrf/Kconfig b/drivers/media/usb/hackrf/Kconfig index 937e6f5c1e8e..072e186018f5 100644 --- a/drivers/media/usb/hackrf/Kconfig +++ b/drivers/media/usb/hackrf/Kconfig @@ -2,7 +2,7 @@ config USB_HACKRF tristate "HackRF" depends on VIDEO_V4L2 select VIDEOBUF2_VMALLOC - ---help--- + help This is a video4linux2 driver for HackRF SDR device. To compile this driver as a module, choose M here: the diff --git a/drivers/media/usb/hdpvr/Kconfig b/drivers/media/usb/hdpvr/Kconfig index d73d9a1952b4..9e78c0c32651 100644 --- a/drivers/media/usb/hdpvr/Kconfig +++ b/drivers/media/usb/hdpvr/Kconfig @@ -2,7 +2,7 @@ config VIDEO_HDPVR tristate "Hauppauge HD PVR support" depends on VIDEO_DEV && VIDEO_V4L2 - ---help--- + help This is a video4linux driver for Hauppauge's HD PVR USB device. To compile this driver as a module, choose M here: the diff --git a/drivers/media/usb/pulse8-cec/Kconfig b/drivers/media/usb/pulse8-cec/Kconfig index 18ead44824ba..11f1b75d3efd 100644 --- a/drivers/media/usb/pulse8-cec/Kconfig +++ b/drivers/media/usb/pulse8-cec/Kconfig @@ -4,7 +4,7 @@ config USB_PULSE8_CEC select CEC_CORE select SERIO select SERIO_SERPORT - ---help--- + help This is a cec driver for the Pulse Eight HDMI CEC device. To compile this driver as a module, choose M here: the diff --git a/drivers/media/usb/pvrusb2/Kconfig b/drivers/media/usb/pvrusb2/Kconfig index 1ad913fc30bf..ac6612cf1bec 100644 --- a/drivers/media/usb/pvrusb2/Kconfig +++ b/drivers/media/usb/pvrusb2/Kconfig @@ -9,7 +9,7 @@ config VIDEO_PVRUSB2 select VIDEO_MSP3400 select VIDEO_WM8775 select VIDEO_CS53L32A - ---help--- + help This is a video4linux driver for Conexant 23416 based usb2 personal video recorder devices. @@ -20,7 +20,7 @@ config VIDEO_PVRUSB2_SYSFS bool "pvrusb2 sysfs support" default y depends on VIDEO_PVRUSB2 && SYSFS - ---help--- + help This option enables the operation of a sysfs based interface for query and control of the pvrusb2 driver. @@ -43,7 +43,7 @@ config VIDEO_PVRUSB2_DVB select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT - ---help--- + help This option enables a DVB interface for the pvrusb2 driver. If your device does not support digital television, this feature will have no affect on the driver's operation. @@ -53,7 +53,7 @@ config VIDEO_PVRUSB2_DVB config VIDEO_PVRUSB2_DEBUGIFC bool "pvrusb2 debug interface" depends on VIDEO_PVRUSB2_SYSFS - ---help--- + help This option enables the inclusion of a debug interface in the pvrusb2 driver, hosted through sysfs. diff --git a/drivers/media/usb/pwc/Kconfig b/drivers/media/usb/pwc/Kconfig index d63d0a850035..5f6d91edca41 100644 --- a/drivers/media/usb/pwc/Kconfig +++ b/drivers/media/usb/pwc/Kconfig @@ -2,7 +2,7 @@ config USB_PWC tristate "USB Philips Cameras" depends on VIDEO_V4L2 select VIDEOBUF2_VMALLOC - ---help--- + help Say Y or M here if you want to use one of these Philips & OEM webcams: * Philips PCA645, PCA646 @@ -41,7 +41,7 @@ config USB_PWC_INPUT_EVDEV bool "USB Philips Cameras input events device support" default y depends on USB_PWC && (USB_PWC=INPUT || INPUT=y) - ---help--- + help This option makes USB Philips cameras register the snapshot button as an input device to report button events. diff --git a/drivers/media/usb/rainshadow-cec/Kconfig b/drivers/media/usb/rainshadow-cec/Kconfig index 030ef01b1ff0..6b00be618db8 100644 --- a/drivers/media/usb/rainshadow-cec/Kconfig +++ b/drivers/media/usb/rainshadow-cec/Kconfig @@ -4,7 +4,7 @@ config USB_RAINSHADOW_CEC select CEC_CORE select SERIO select SERIO_SERPORT - ---help--- + help This is a cec driver for the RainShadow Tech HDMI CEC device. To compile this driver as a module, choose M here: the diff --git a/drivers/media/usb/siano/Kconfig b/drivers/media/usb/siano/Kconfig index d37b742d4f7a..cc5e5aa3c93a 100644 --- a/drivers/media/usb/siano/Kconfig +++ b/drivers/media/usb/siano/Kconfig @@ -8,6 +8,6 @@ config SMS_USB_DRV depends on !RC_CORE || RC_CORE select MEDIA_COMMON_OPTIONS select SMS_SIANO_MDTV - ---help--- + help Choose if you would like to have Siano's support for USB interface diff --git a/drivers/media/usb/stk1160/Kconfig b/drivers/media/usb/stk1160/Kconfig index 425ed00e2599..03426e4437ea 100644 --- a/drivers/media/usb/stk1160/Kconfig +++ b/drivers/media/usb/stk1160/Kconfig @@ -2,7 +2,7 @@ config VIDEO_STK1160_COMMON tristate "STK1160 USB video capture support" depends on VIDEO_DEV && I2C - ---help--- + help This is a video4linux driver for STK1160 based video capture devices. To compile this driver as a module, choose M here: the diff --git a/drivers/media/usb/stkwebcam/Kconfig b/drivers/media/usb/stkwebcam/Kconfig index a6a00aa4fce6..ea9e04b3caaf 100644 --- a/drivers/media/usb/stkwebcam/Kconfig +++ b/drivers/media/usb/stkwebcam/Kconfig @@ -1,7 +1,7 @@ config USB_STKWEBCAM tristate "USB Syntek DC1125 Camera support" depends on VIDEO_V4L2 - ---help--- + help Say Y here if you want to use this type of camera. Supported devices are typically found in some Asus laptops, with USB id 174f:a311 and 05e1:0501. Other Syntek cameras diff --git a/drivers/media/usb/tm6000/Kconfig b/drivers/media/usb/tm6000/Kconfig index a43b77abd931..321ae691f4d9 100644 --- a/drivers/media/usb/tm6000/Kconfig +++ b/drivers/media/usb/tm6000/Kconfig @@ -18,7 +18,7 @@ config VIDEO_TM6000_ALSA tristate "TV Master TM5600/6000/6010 audio support" depends on VIDEO_TM6000 && SND select SND_PCM - ---help--- + help This is a video4linux driver for direct (DMA) audio for TM5600/TM6000/TM6010 USB Devices. @@ -29,5 +29,5 @@ config VIDEO_TM6000_DVB tristate "DVB Support for tm6000 based TV cards" depends on VIDEO_TM6000 && DVB_CORE && USB select DVB_ZL10353 - ---help--- + help This adds support for DVB cards based on the tm5600/tm6000 chip. diff --git a/drivers/media/usb/usbtv/Kconfig b/drivers/media/usb/usbtv/Kconfig index 14a0941fa0d0..2b4ac0848469 100644 --- a/drivers/media/usb/usbtv/Kconfig +++ b/drivers/media/usb/usbtv/Kconfig @@ -4,7 +4,7 @@ config VIDEO_USBTV select SND_PCM select VIDEOBUF2_VMALLOC - ---help--- + help This is a video4linux2 driver for USBTV007 based video capture devices. To compile this driver as a module, choose M here: the diff --git a/drivers/media/usb/usbvision/Kconfig b/drivers/media/usb/usbvision/Kconfig index 6b6afc5d8f7e..7aa080cb9884 100644 --- a/drivers/media/usb/usbvision/Kconfig +++ b/drivers/media/usb/usbvision/Kconfig @@ -3,7 +3,7 @@ config VIDEO_USBVISION depends on I2C && VIDEO_V4L2 select VIDEO_TUNER select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT - ---help--- + help There are more than 50 different USB video devices based on NT1003/1004/1005 USB Bridges. This driver enables using those devices. diff --git a/drivers/media/usb/uvc/Kconfig b/drivers/media/usb/uvc/Kconfig index 6ed85efabcaa..94937d0cc2e3 100644 --- a/drivers/media/usb/uvc/Kconfig +++ b/drivers/media/usb/uvc/Kconfig @@ -2,7 +2,7 @@ config USB_VIDEO_CLASS tristate "USB Video Class (UVC)" depends on VIDEO_V4L2 select VIDEOBUF2_VMALLOC - ---help--- + help Support for the USB Video Class (UVC). Currently only video input devices, such as webcams, are supported. @@ -13,7 +13,7 @@ config USB_VIDEO_CLASS_INPUT_EVDEV default y depends on USB_VIDEO_CLASS depends on USB_VIDEO_CLASS=INPUT || INPUT=y - ---help--- + help This option makes USB Video Class devices register an input device to report button events. diff --git a/drivers/media/usb/zr364xx/Kconfig b/drivers/media/usb/zr364xx/Kconfig index ac429bca70e8..979b1d4f3f68 100644 --- a/drivers/media/usb/zr364xx/Kconfig +++ b/drivers/media/usb/zr364xx/Kconfig @@ -3,7 +3,7 @@ config USB_ZR364XX depends on VIDEO_V4L2 select VIDEOBUF_GEN select VIDEOBUF_VMALLOC - ---help--- + help Say Y here if you want to connect this type of camera to your computer's USB port. See for more info diff --git a/drivers/media/v4l2-core/Kconfig b/drivers/media/v4l2-core/Kconfig index c0940f5c69b4..8402096f7796 100644 --- a/drivers/media/v4l2-core/Kconfig +++ b/drivers/media/v4l2-core/Kconfig @@ -13,7 +13,7 @@ config VIDEO_V4L2 config VIDEO_ADV_DEBUG bool "Enable advanced debug functionality on V4L2 drivers" default n - ---help--- + help Say Y here to enable advanced debugging functionality on some V4L devices. In doubt, say N. @@ -21,7 +21,7 @@ config VIDEO_ADV_DEBUG config VIDEO_FIXED_MINOR_RANGES bool "Enable old-style fixed minor ranges on drivers/video devices" default n - ---help--- + help Say Y here to enable the old-style fixed-range minor assignments. Only useful if you rely on the old behavior and use mknod instead of udev. @@ -33,7 +33,7 @@ config VIDEO_PCI_SKELETON depends on SAMPLES depends on VIDEO_V4L2 && VIDEOBUF2_CORE depends on VIDEOBUF2_MEMOPS && VIDEOBUF2_DMA_CONTIG - ---help--- + help Enable build of the skeleton PCI driver, used as a reference when developing new drivers. @@ -51,7 +51,7 @@ config V4L2_FLASH_LED_CLASS tristate "V4L2 flash API for LED flash class devices" depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API depends on LEDS_CLASS_FLASH - ---help--- + help Say Y here to enable V4L2 flash API support for LED flash class drivers. diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig index 1da5c20d65c0..277df2b39384 100644 --- a/drivers/staging/media/Kconfig +++ b/drivers/staging/media/Kconfig @@ -1,7 +1,7 @@ menuconfig STAGING_MEDIA bool "Media staging drivers" default n - ---help--- + help This option allows you to select a number of media drivers that don't have the "normal" Linux kernel quality level. Most of them don't follow properly the V4L, DVB and/or RC API's, diff --git a/drivers/staging/media/bcm2048/Kconfig b/drivers/staging/media/bcm2048/Kconfig index a9fc6e186494..a1526175eccb 100644 --- a/drivers/staging/media/bcm2048/Kconfig +++ b/drivers/staging/media/bcm2048/Kconfig @@ -5,7 +5,7 @@ config I2C_BCM2048 tristate "Broadcom BCM2048 FM Radio Receiver support" depends on I2C && VIDEO_V4L2 && RADIO_ADAPTERS - ---help--- + help Say Y here if you want support to BCM2048 FM Radio Receiver. This device driver supports only i2c bus. diff --git a/drivers/staging/media/imx/Kconfig b/drivers/staging/media/imx/Kconfig index 36b276ea2ecc..f6d220b649fb 100644 --- a/drivers/staging/media/imx/Kconfig +++ b/drivers/staging/media/imx/Kconfig @@ -6,7 +6,7 @@ config VIDEO_IMX_MEDIA depends on HAS_DMA select VIDEOBUF2_DMA_CONTIG select V4L2_FWNODE - ---help--- + help Say yes here to enable support for video4linux media controller driver for the i.MX5/6 SOC. @@ -17,7 +17,7 @@ config VIDEO_IMX_CSI tristate "i.MX5/6 Camera Sensor Interface driver" depends on VIDEO_IMX_MEDIA && VIDEO_DEV && I2C default y - ---help--- + help A video4linux camera sensor interface driver for i.MX5/6. config VIDEO_IMX7_CSI diff --git a/drivers/staging/media/ipu3/Kconfig b/drivers/staging/media/ipu3/Kconfig index 75cd889f18f7..d5e50f88684a 100644 --- a/drivers/staging/media/ipu3/Kconfig +++ b/drivers/staging/media/ipu3/Kconfig @@ -5,7 +5,7 @@ config VIDEO_IPU3_IMGU depends on X86 select IOMMU_IOVA select VIDEOBUF2_DMA_SG - ---help--- + help This is the Video4Linux2 driver for Intel IPU3 image processing unit, found in Intel Skylake and Kaby Lake SoCs and used for processing images and video. diff --git a/drivers/staging/media/omap4iss/Kconfig b/drivers/staging/media/omap4iss/Kconfig index 841cc0b3ce13..4dcbc5065821 100644 --- a/drivers/staging/media/omap4iss/Kconfig +++ b/drivers/staging/media/omap4iss/Kconfig @@ -6,5 +6,5 @@ config VIDEO_OMAP4 depends on ARCH_OMAP4 || COMPILE_TEST select MFD_SYSCON select VIDEOBUF2_DMA_CONTIG - ---help--- + help Driver for an OMAP 4 ISS controller. -- cgit v1.2.3