From b91e146c38b003c899710ede6d05fc824675e386 Mon Sep 17 00:00:00 2001 From: Richard Lai Date: Sat, 17 Feb 2018 16:28:24 +0000 Subject: iio: chemical: ccs811: Corrected firmware boot/application mode transition CCS811 has different I2C register maps in boot and application mode. When CCS811 is in boot mode, register APP_START (0xF4) is used to transit the firmware state from boot to application mode. However, APP_START is not a valid register location when CCS811 is in application mode (refer to "CCS811 Bootloader Register Map" and "CCS811 Application Register Map" in CCS811 datasheet). The driver should not attempt to perform a write to APP_START while CCS811 is in application mode, as this is not a valid or documented register location. When prob function is being called, the driver assumes the CCS811 sensor is in boot mode, and attempts to perform a write to APP_START. Although CCS811 powers-up in boot mode, it may have already been transited to application mode by previous instances, e.g. unload and reload device driver by the system, or explicitly by user. Depending on the system design, CCS811 sensor may be permanently connected to system power source rather than power controlled by GPIO, hence it is possible that the sensor is never power reset, thus the firmware could be in either boot or application mode at any given time when driver prob function is being called. This patch checks the STATUS register before attempting to send a write to APP_START. Only if the firmware is not in application mode and has valid firmware application loaded, then it will continue to start transiting the firmware boot to application mode. Signed-off-by: Richard Lai Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/chemical/ccs811.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/chemical/ccs811.c b/drivers/iio/chemical/ccs811.c index fbe2431f5b81..1ea9f5513b02 100644 --- a/drivers/iio/chemical/ccs811.c +++ b/drivers/iio/chemical/ccs811.c @@ -133,6 +133,9 @@ static int ccs811_start_sensor_application(struct i2c_client *client) if (ret < 0) return ret; + if ((ret & CCS811_STATUS_FW_MODE_APPLICATION)) + return 0; + if ((ret & CCS811_STATUS_APP_VALID_MASK) != CCS811_STATUS_APP_VALID_LOADED) return -EIO; -- cgit v1.2.3 From 4e4f9fbc5620a060dc7d3a651cdfb001c1d7c2f9 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Fri, 23 Feb 2018 13:50:55 +0100 Subject: iio: adc: stm32-dfsdm: fix compatible data use Fix use of compatible data: stm32h7 regmap configuration is statically used. Rather use regmap_cfg from compatible data. Fixes: bed73904e76f ("IIO: ADC: add stm32 DFSDM core support") Signed-off-by: Fabrice Gasnier Acked-by: Arnaud Pouliquen Signed-off-by: Jonathan Cameron --- drivers/iio/adc/stm32-dfsdm-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/adc/stm32-dfsdm-core.c b/drivers/iio/adc/stm32-dfsdm-core.c index 6290332cfd3f..0635f9390b20 100644 --- a/drivers/iio/adc/stm32-dfsdm-core.c +++ b/drivers/iio/adc/stm32-dfsdm-core.c @@ -274,7 +274,7 @@ static int stm32_dfsdm_probe(struct platform_device *pdev) dfsdm->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "dfsdm", dfsdm->base, - &stm32h7_dfsdm_regmap_cfg); + dev_data->regmap_cfg); if (IS_ERR(dfsdm->regmap)) { ret = PTR_ERR(dfsdm->regmap); dev_err(&pdev->dev, "%s: Failed to allocate regmap: %d\n", -- cgit v1.2.3 From c278609bdde9df330b7fe3d61ec1bc1a8cac4a78 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Fri, 23 Feb 2018 13:50:56 +0100 Subject: iio: adc: stm32-dfsdm: fix call to stop channel stm32_dfsdm_stop_channel must be called with channel id, not filter id. Fixes: e2e6771c6462 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support") Signed-off-by: Fabrice Gasnier Acked-by: Arnaud Pouliquen Signed-off-by: Jonathan Cameron --- drivers/iio/adc/stm32-dfsdm-adc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c index daa026d6a94f..0eff8119119c 100644 --- a/drivers/iio/adc/stm32-dfsdm-adc.c +++ b/drivers/iio/adc/stm32-dfsdm-adc.c @@ -464,7 +464,7 @@ stop_channels: regmap_update_bits(regmap, DFSDM_CR1(adc->fl_id), DFSDM_CR1_RCONT_MASK, 0); - stm32_dfsdm_stop_channel(adc->dfsdm, adc->fl_id); + stm32_dfsdm_stop_channel(adc->dfsdm, adc->ch_id); return ret; } -- cgit v1.2.3 From 179858efd94f49945d41919c1d09a8e17c2afa98 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Fri, 23 Feb 2018 13:50:57 +0100 Subject: iio: adc: stm32-dfsdm: fix clock source selection Add missing clock source selection. In case "audio" clock is provided, it's unused currently: "dfsdm" clock is wrongly used by default. Fixes: bed73904e76f ("IIO: ADC: add stm32 DFSDM core support") Signed-off-by: Fabrice Gasnier Acked-by: Arnaud Pouliquen Signed-off-by: Jonathan Cameron --- drivers/iio/adc/stm32-dfsdm-core.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/adc/stm32-dfsdm-core.c b/drivers/iio/adc/stm32-dfsdm-core.c index 0635f9390b20..e50efdcc41ff 100644 --- a/drivers/iio/adc/stm32-dfsdm-core.c +++ b/drivers/iio/adc/stm32-dfsdm-core.c @@ -83,7 +83,7 @@ int stm32_dfsdm_start_dfsdm(struct stm32_dfsdm *dfsdm) { struct dfsdm_priv *priv = container_of(dfsdm, struct dfsdm_priv, dfsdm); struct device *dev = &priv->pdev->dev; - unsigned int clk_div = priv->spi_clk_out_div; + unsigned int clk_div = priv->spi_clk_out_div, clk_src; int ret; if (atomic_inc_return(&priv->n_active_ch) == 1) { @@ -100,6 +100,14 @@ int stm32_dfsdm_start_dfsdm(struct stm32_dfsdm *dfsdm) } } + /* select clock source, e.g. 0 for "dfsdm" or 1 for "audio" */ + clk_src = priv->aclk ? 1 : 0; + ret = regmap_update_bits(dfsdm->regmap, DFSDM_CHCFGR1(0), + DFSDM_CHCFGR1_CKOUTSRC_MASK, + DFSDM_CHCFGR1_CKOUTSRC(clk_src)); + if (ret < 0) + goto disable_aclk; + /* Output the SPI CLKOUT (if clk_div == 0 clock if OFF) */ ret = regmap_update_bits(dfsdm->regmap, DFSDM_CHCFGR1(0), DFSDM_CHCFGR1_CKOUTDIV_MASK, -- cgit v1.2.3 From 0645af1b6988467b8362aaf44fb4013abb045bee Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Fri, 23 Feb 2018 13:50:58 +0100 Subject: iio: adc: stm32-dfsdm: fix multiple channel initialization When several channels are registered (e.g. via st,adc-channels property): - channels array is wrongly filled in. Only 1st element in array is being initialized with last registered channel. Fix it by passing reference to relevant channel (e.g. array[index]). - only last initialized channel can work properly (e.g. unique 'ch_id' is used). Converting any other channel result in conversion timeout. Fix it by getting rid of 'ch_id', use chan->channel instead. Signed-off-by: Fabrice Gasnier Acked-by: Arnaud Pouliquen Signed-off-by: Jonathan Cameron --- drivers/iio/adc/stm32-dfsdm-adc.c | 39 +++++++++++++++++++++------------------ 1 file changed, 21 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c index 0eff8119119c..01422d11753c 100644 --- a/drivers/iio/adc/stm32-dfsdm-adc.c +++ b/drivers/iio/adc/stm32-dfsdm-adc.c @@ -54,7 +54,6 @@ struct stm32_dfsdm_adc { struct stm32_dfsdm *dfsdm; const struct stm32_dfsdm_dev_data *dev_data; unsigned int fl_id; - unsigned int ch_id; /* ADC specific */ unsigned int oversamp; @@ -384,7 +383,7 @@ static ssize_t dfsdm_adc_audio_set_spiclk(struct iio_dev *indio_dev, { struct stm32_dfsdm_adc *adc = iio_priv(indio_dev); struct stm32_dfsdm_filter *fl = &adc->dfsdm->fl_list[adc->fl_id]; - struct stm32_dfsdm_channel *ch = &adc->dfsdm->ch_list[adc->ch_id]; + struct stm32_dfsdm_channel *ch = &adc->dfsdm->ch_list[chan->channel]; unsigned int sample_freq = adc->sample_freq; unsigned int spi_freq; int ret; @@ -419,18 +418,20 @@ static ssize_t dfsdm_adc_audio_set_spiclk(struct iio_dev *indio_dev, return len; } -static int stm32_dfsdm_start_conv(struct stm32_dfsdm_adc *adc, bool dma) +static int stm32_dfsdm_start_conv(struct stm32_dfsdm_adc *adc, + const struct iio_chan_spec *chan, + bool dma) { struct regmap *regmap = adc->dfsdm->regmap; int ret; unsigned int dma_en = 0, cont_en = 0; - ret = stm32_dfsdm_start_channel(adc->dfsdm, adc->ch_id); + ret = stm32_dfsdm_start_channel(adc->dfsdm, chan->channel); if (ret < 0) return ret; ret = stm32_dfsdm_filter_configure(adc->dfsdm, adc->fl_id, - adc->ch_id); + chan->channel); if (ret < 0) goto stop_channels; @@ -464,12 +465,13 @@ stop_channels: regmap_update_bits(regmap, DFSDM_CR1(adc->fl_id), DFSDM_CR1_RCONT_MASK, 0); - stm32_dfsdm_stop_channel(adc->dfsdm, adc->ch_id); + stm32_dfsdm_stop_channel(adc->dfsdm, chan->channel); return ret; } -static void stm32_dfsdm_stop_conv(struct stm32_dfsdm_adc *adc) +static void stm32_dfsdm_stop_conv(struct stm32_dfsdm_adc *adc, + const struct iio_chan_spec *chan) { struct regmap *regmap = adc->dfsdm->regmap; @@ -482,7 +484,7 @@ static void stm32_dfsdm_stop_conv(struct stm32_dfsdm_adc *adc) regmap_update_bits(regmap, DFSDM_CR1(adc->fl_id), DFSDM_CR1_RCONT_MASK, 0); - stm32_dfsdm_stop_channel(adc->dfsdm, adc->ch_id); + stm32_dfsdm_stop_channel(adc->dfsdm, chan->channel); } static int stm32_dfsdm_set_watermark(struct iio_dev *indio_dev, @@ -609,6 +611,7 @@ static int stm32_dfsdm_adc_dma_start(struct iio_dev *indio_dev) static int stm32_dfsdm_postenable(struct iio_dev *indio_dev) { struct stm32_dfsdm_adc *adc = iio_priv(indio_dev); + const struct iio_chan_spec *chan = &indio_dev->channels[0]; int ret; /* Reset adc buffer index */ @@ -618,7 +621,7 @@ static int stm32_dfsdm_postenable(struct iio_dev *indio_dev) if (ret < 0) return ret; - ret = stm32_dfsdm_start_conv(adc, true); + ret = stm32_dfsdm_start_conv(adc, chan, true); if (ret) { dev_err(&indio_dev->dev, "Can't start conversion\n"); goto stop_dfsdm; @@ -635,7 +638,7 @@ static int stm32_dfsdm_postenable(struct iio_dev *indio_dev) return 0; err_stop_conv: - stm32_dfsdm_stop_conv(adc); + stm32_dfsdm_stop_conv(adc, chan); stop_dfsdm: stm32_dfsdm_stop_dfsdm(adc->dfsdm); @@ -645,11 +648,12 @@ stop_dfsdm: static int stm32_dfsdm_predisable(struct iio_dev *indio_dev) { struct stm32_dfsdm_adc *adc = iio_priv(indio_dev); + const struct iio_chan_spec *chan = &indio_dev->channels[0]; if (adc->dma_chan) dmaengine_terminate_all(adc->dma_chan); - stm32_dfsdm_stop_conv(adc); + stm32_dfsdm_stop_conv(adc, chan); stm32_dfsdm_stop_dfsdm(adc->dfsdm); @@ -730,7 +734,7 @@ static int stm32_dfsdm_single_conv(struct iio_dev *indio_dev, if (ret < 0) goto stop_dfsdm; - ret = stm32_dfsdm_start_conv(adc, false); + ret = stm32_dfsdm_start_conv(adc, chan, false); if (ret < 0) { regmap_update_bits(adc->dfsdm->regmap, DFSDM_CR2(adc->fl_id), DFSDM_CR2_REOCIE_MASK, DFSDM_CR2_REOCIE(0)); @@ -751,7 +755,7 @@ static int stm32_dfsdm_single_conv(struct iio_dev *indio_dev, else ret = IIO_VAL_INT; - stm32_dfsdm_stop_conv(adc); + stm32_dfsdm_stop_conv(adc, chan); stop_dfsdm: stm32_dfsdm_stop_dfsdm(adc->dfsdm); @@ -765,7 +769,7 @@ static int stm32_dfsdm_write_raw(struct iio_dev *indio_dev, { struct stm32_dfsdm_adc *adc = iio_priv(indio_dev); struct stm32_dfsdm_filter *fl = &adc->dfsdm->fl_list[adc->fl_id]; - struct stm32_dfsdm_channel *ch = &adc->dfsdm->ch_list[adc->ch_id]; + struct stm32_dfsdm_channel *ch = &adc->dfsdm->ch_list[chan->channel]; unsigned int spi_freq = adc->spi_freq; int ret = -EINVAL; @@ -972,7 +976,6 @@ static int stm32_dfsdm_adc_chan_init_one(struct iio_dev *indio_dev, } ch->scan_type.realbits = 24; ch->scan_type.storagebits = 32; - adc->ch_id = ch->channel; return stm32_dfsdm_chan_configure(adc->dfsdm, &adc->dfsdm->ch_list[ch->channel]); @@ -1001,7 +1004,7 @@ static int stm32_dfsdm_audio_init(struct iio_dev *indio_dev) } ch->info_mask_separate = BIT(IIO_CHAN_INFO_SAMP_FREQ); - d_ch = &adc->dfsdm->ch_list[adc->ch_id]; + d_ch = &adc->dfsdm->ch_list[ch->channel]; if (d_ch->src != DFSDM_CHANNEL_SPI_CLOCK_EXTERNAL) adc->spi_freq = adc->dfsdm->spi_master_freq; @@ -1042,8 +1045,8 @@ static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev) return -ENOMEM; for (chan_idx = 0; chan_idx < num_ch; chan_idx++) { - ch->scan_index = chan_idx; - ret = stm32_dfsdm_adc_chan_init_one(indio_dev, ch); + ch[chan_idx].scan_index = chan_idx; + ret = stm32_dfsdm_adc_chan_init_one(indio_dev, &ch[chan_idx]); if (ret < 0) { dev_err(&indio_dev->dev, "Channels init failed\n"); return ret; -- cgit v1.2.3 From e113d65ae417ae6d9be229649b81d404c47ade79 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 28 Feb 2018 05:47:07 -0500 Subject: media: tegra-cec: reset rx_buf_cnt when start bit detected If a start bit is detected, then reset the receive buffer counter to 0. This ensures that no stale data is in the buffer if a message is broken off midstream due to e.g. a Low Drive condition and then retransmitted. The only Rx interrupts we need to listen to are RX_REGISTER_FULL (i.e. a valid byte was received) and RX_START_BIT_DETECTED (i.e. a new message starts and we need to reset the counter). Signed-off-by: Hans Verkuil Cc: # for v4.15 and up Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/tegra-cec/tegra_cec.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/tegra-cec/tegra_cec.c b/drivers/media/platform/tegra-cec/tegra_cec.c index 92f93a880015..aba488cd0e64 100644 --- a/drivers/media/platform/tegra-cec/tegra_cec.c +++ b/drivers/media/platform/tegra-cec/tegra_cec.c @@ -172,16 +172,13 @@ static irqreturn_t tegra_cec_irq_handler(int irq, void *data) } } - if (status & (TEGRA_CEC_INT_STAT_RX_REGISTER_OVERRUN | - TEGRA_CEC_INT_STAT_RX_BUS_ANOMALY_DETECTED | - TEGRA_CEC_INT_STAT_RX_START_BIT_DETECTED | - TEGRA_CEC_INT_STAT_RX_BUS_ERROR_DETECTED)) { + if (status & TEGRA_CEC_INT_STAT_RX_START_BIT_DETECTED) { cec_write(cec, TEGRA_CEC_INT_STAT, - (TEGRA_CEC_INT_STAT_RX_REGISTER_OVERRUN | - TEGRA_CEC_INT_STAT_RX_BUS_ANOMALY_DETECTED | - TEGRA_CEC_INT_STAT_RX_START_BIT_DETECTED | - TEGRA_CEC_INT_STAT_RX_BUS_ERROR_DETECTED)); - } else if (status & TEGRA_CEC_INT_STAT_RX_REGISTER_FULL) { + TEGRA_CEC_INT_STAT_RX_START_BIT_DETECTED); + cec->rx_done = false; + cec->rx_buf_cnt = 0; + } + if (status & TEGRA_CEC_INT_STAT_RX_REGISTER_FULL) { u32 v; cec_write(cec, TEGRA_CEC_INT_STAT, @@ -255,7 +252,7 @@ static int tegra_cec_adap_enable(struct cec_adapter *adap, bool enable) TEGRA_CEC_INT_MASK_TX_BUS_ANOMALY_DETECTED | TEGRA_CEC_INT_MASK_TX_FRAME_TRANSMITTED | TEGRA_CEC_INT_MASK_RX_REGISTER_FULL | - TEGRA_CEC_INT_MASK_RX_REGISTER_OVERRUN); + TEGRA_CEC_INT_MASK_RX_START_BIT_DETECTED); cec_write(cec, TEGRA_CEC_HW_CONTROL, TEGRA_CEC_HWCTRL_TX_RX_MODE); return 0; -- cgit v1.2.3 From 2c27476e398bfd9fa2572ff80a0de16f0becc900 Mon Sep 17 00:00:00 2001 From: Michael Ira Krufky Date: Tue, 16 Jan 2018 22:16:12 -0500 Subject: media: dvb: fix a Kconfig typo drivers/media/Kconfig: typo: replace `with` with `which` Signed-off-by: Michael Ira Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig index 372c074bb1b9..86c1a190d946 100644 --- a/drivers/media/Kconfig +++ b/drivers/media/Kconfig @@ -151,7 +151,7 @@ config DVB_MMAP select VIDEOBUF2_VMALLOC default n help - This option enables DVB experimental memory-mapped API, with + This option enables DVB experimental memory-mapped API, which reduces the number of context switches to read DVB buffers, as the buffers can use mmap() syscalls. -- cgit v1.2.3 From 655296c8bbeffcf020558c4455305d597a73bde1 Mon Sep 17 00:00:00 2001 From: Michael Kelley Date: Sun, 4 Mar 2018 22:24:08 -0700 Subject: Drivers: hv: vmbus: Fix ring buffer signaling Fix bugs in signaling the Hyper-V host when freeing space in the host->guest ring buffer: 1. The interrupt_mask must not be used to determine whether to signal on the host->guest ring buffer 2. The ring buffer write_index must be read (via hv_get_bytes_to_write) *after* pending_send_sz is read in order to avoid a race condition 3. Comparisons with pending_send_sz must treat the "equals" case as not-enough-space 4. Don't signal if the pending_send_sz feature is not present. Older versions of Hyper-V that don't implement this feature will poll. Fixes: 03bad714a161 ("vmbus: more host signalling avoidance") Cc: Stable # 4.14 and above Signed-off-by: Michael Kelley Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/ring_buffer.c | 52 ++++++++++++++++++++++++++++++++---------------- 1 file changed, 35 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/hv/ring_buffer.c b/drivers/hv/ring_buffer.c index 50e071444a5c..8699bb969e7e 100644 --- a/drivers/hv/ring_buffer.c +++ b/drivers/hv/ring_buffer.c @@ -417,13 +417,24 @@ __hv_pkt_iter_next(struct vmbus_channel *channel, } EXPORT_SYMBOL_GPL(__hv_pkt_iter_next); +/* How many bytes were read in this iterator cycle */ +static u32 hv_pkt_iter_bytes_read(const struct hv_ring_buffer_info *rbi, + u32 start_read_index) +{ + if (rbi->priv_read_index >= start_read_index) + return rbi->priv_read_index - start_read_index; + else + return rbi->ring_datasize - start_read_index + + rbi->priv_read_index; +} + /* * Update host ring buffer after iterating over packets. */ void hv_pkt_iter_close(struct vmbus_channel *channel) { struct hv_ring_buffer_info *rbi = &channel->inbound; - u32 orig_write_sz = hv_get_bytes_to_write(rbi); + u32 curr_write_sz, pending_sz, bytes_read, start_read_index; /* * Make sure all reads are done before we update the read index since @@ -431,8 +442,12 @@ void hv_pkt_iter_close(struct vmbus_channel *channel) * is updated. */ virt_rmb(); + start_read_index = rbi->ring_buffer->read_index; rbi->ring_buffer->read_index = rbi->priv_read_index; + if (!rbi->ring_buffer->feature_bits.feat_pending_send_sz) + return; + /* * Issue a full memory barrier before making the signaling decision. * Here is the reason for having this barrier: @@ -446,26 +461,29 @@ void hv_pkt_iter_close(struct vmbus_channel *channel) */ virt_mb(); - /* If host has disabled notifications then skip */ - if (rbi->ring_buffer->interrupt_mask) + pending_sz = READ_ONCE(rbi->ring_buffer->pending_send_sz); + if (!pending_sz) return; - if (rbi->ring_buffer->feature_bits.feat_pending_send_sz) { - u32 pending_sz = READ_ONCE(rbi->ring_buffer->pending_send_sz); + /* + * Ensure the read of write_index in hv_get_bytes_to_write() + * happens after the read of pending_send_sz. + */ + virt_rmb(); + curr_write_sz = hv_get_bytes_to_write(rbi); + bytes_read = hv_pkt_iter_bytes_read(rbi, start_read_index); - /* - * If there was space before we began iteration, - * then host was not blocked. Also handles case where - * pending_sz is zero then host has nothing pending - * and does not need to be signaled. - */ - if (orig_write_sz > pending_sz) - return; + /* + * If there was space before we began iteration, + * then host was not blocked. + */ - /* If pending write will not fit, don't give false hope. */ - if (hv_get_bytes_to_write(rbi) < pending_sz) - return; - } + if (curr_write_sz - bytes_read > pending_sz) + return; + + /* If pending write will not fit, don't give false hope. */ + if (curr_write_sz <= pending_sz) + return; vmbus_setevent(channel); } -- cgit v1.2.3 From 625504aeff11eeb95f78ad9dde22d911c6839c71 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Niklas=20S=C3=B6derlund?= Date: Thu, 22 Feb 2018 00:32:50 +0100 Subject: pinctrl: sh-pfc: r8a7795: remove duplicate of CLKOUT pin in pinmux_pins[] MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When adding GP-1-28 port pin support it was forgotten to remove the CLKOUT pin from the list of pins that are not associated with a GPIO port in pinmux_pins[]. This results in a warning when reading the pinctrl files in sysfs as the CLKOUT pin is still added as a none GPIO pin. Fix this by removing the duplicated entry which is no longer needed. ~ # cat /sys/kernel/debug/pinctrl/e6060000.pin-controller/pinconf-pins [ 89.432081] ------------[ cut here ]------------ [ 89.436904] Pin 496 is not in bias info list [ 89.441252] WARNING: CPU: 1 PID: 456 at drivers/pinctrl/sh-pfc/core.c:408 sh_pfc_pin_to_bias_reg+0xb0/0xb8 [ 89.451002] CPU: 1 PID: 456 Comm: cat Not tainted 4.16.0-rc1-arm64-renesas-00048-gdfafc344a4f24dde #12 [ 89.460394] Hardware name: Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+ (DT) [ 89.468910] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 89.473747] pc : sh_pfc_pin_to_bias_reg+0xb0/0xb8 [ 89.478495] lr : sh_pfc_pin_to_bias_reg+0xb0/0xb8 [ 89.483241] sp : ffff00000aff3ab0 [ 89.486587] x29: ffff00000aff3ab0 x28: ffff00000893c698 [ 89.491955] x27: ffff000008ad7d98 x26: 0000000000000000 [ 89.497323] x25: ffff8006fb3f5028 x24: ffff8006fb3f5018 [ 89.502690] x23: 0000000000000001 x22: 00000000000001f0 [ 89.508057] x21: ffff8006fb3f5018 x20: ffff000008bef000 [ 89.513423] x19: 0000000000000000 x18: ffffffffffffffff [ 89.518790] x17: 0000000000006c4a x16: ffff000008d67c98 [ 89.524157] x15: 0000000000000001 x14: ffff00000896ca98 [ 89.529524] x13: 00000000cce5f611 x12: ffff8006f8d3b5a8 [ 89.534891] x11: ffff00000981e000 x10: ffff000008befa08 [ 89.540258] x9 : ffff8006f9b987a0 x8 : ffff000008befa08 [ 89.545625] x7 : ffff000008137094 x6 : 0000000000000000 [ 89.550991] x5 : 0000000000000000 x4 : 0000000000000001 [ 89.556357] x3 : 0000000000000007 x2 : 0000000000000007 [ 89.561723] x1 : 1ff24f80f1818600 x0 : 0000000000000000 [ 89.567091] Call trace: [ 89.569561] sh_pfc_pin_to_bias_reg+0xb0/0xb8 [ 89.573960] r8a7795_pinmux_get_bias+0x30/0xc0 [ 89.578445] sh_pfc_pinconf_get+0x1e0/0x2d8 [ 89.582669] pin_config_get_for_pin+0x20/0x30 [ 89.587067] pinconf_generic_dump_one+0x180/0x1c8 [ 89.591815] pinconf_generic_dump_pins+0x84/0xd8 [ 89.596476] pinconf_pins_show+0xc8/0x130 [ 89.600528] seq_read+0xe4/0x510 [ 89.603789] full_proxy_read+0x60/0x90 [ 89.607576] __vfs_read+0x30/0x140 [ 89.611010] vfs_read+0x90/0x170 [ 89.614269] SyS_read+0x60/0xd8 [ 89.617443] __sys_trace_return+0x0/0x4 [ 89.621314] ---[ end trace 99c8d0d39c13e794 ]--- Fixes: 82d2de5a4f646f72 ("pinctrl: sh-pfc: r8a7795: Add GP-1-28 port pin support") Reviewed-and-tested-by: Geert Uytterhoeven Signed-off-by: Niklas Söderlund Signed-off-by: Linus Walleij --- drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c index 18aeee592fdc..35951e7b89d2 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c @@ -1538,7 +1538,6 @@ static const struct sh_pfc_pin pinmux_pins[] = { SH_PFC_PIN_NAMED_CFG('B', 18, AVB_TD1, CFG_FLAGS), SH_PFC_PIN_NAMED_CFG('B', 19, AVB_RXC, CFG_FLAGS), SH_PFC_PIN_NAMED_CFG('C', 1, PRESETOUT#, CFG_FLAGS), - SH_PFC_PIN_NAMED_CFG('F', 1, CLKOUT, CFG_FLAGS), SH_PFC_PIN_NAMED_CFG('H', 37, MLB_REF, CFG_FLAGS), SH_PFC_PIN_NAMED_CFG('V', 3, QSPI1_SPCLK, CFG_FLAGS), SH_PFC_PIN_NAMED_CFG('V', 5, QSPI1_SSL, CFG_FLAGS), -- cgit v1.2.3 From 93b0beae721b3344923b4b8317e9d83b542f4ca6 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 20 Feb 2018 19:17:51 +0100 Subject: pinctrl: samsung: Validate alias coming from DT Driver uses alias from Device Tree as an index of pin controller data array. In case of a wrong DTB or an out-of-tree DTB, the alias could be outside of this data array leading to out-of-bounds access. Depending on binary and memory layout, this could be handled properly (showing error like "samsung-pinctrl 3860000.pinctrl: driver data not available") or could lead to exceptions. Reported-by: Geert Uytterhoeven Cc: Fixes: 30574f0db1b1 ("pinctrl: add samsung pinctrl and gpiolib driver") Signed-off-by: Krzysztof Kozlowski Reviewed-by: Geert Uytterhoeven Acked-by: Tomasz Figa Signed-off-by: Linus Walleij --- drivers/pinctrl/samsung/pinctrl-exynos-arm.c | 56 +++++++++++++++++++---- drivers/pinctrl/samsung/pinctrl-exynos-arm64.c | 14 +++++- drivers/pinctrl/samsung/pinctrl-s3c24xx.c | 28 ++++++++++-- drivers/pinctrl/samsung/pinctrl-s3c64xx.c | 7 ++- drivers/pinctrl/samsung/pinctrl-samsung.c | 61 ++++++++++++++++---------- drivers/pinctrl/samsung/pinctrl-samsung.h | 40 ++++++++++------- 6 files changed, 154 insertions(+), 52 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm.c index c32399faff57..90c274490181 100644 --- a/drivers/pinctrl/samsung/pinctrl-exynos-arm.c +++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm.c @@ -124,7 +124,7 @@ static const struct samsung_pin_bank_data s5pv210_pin_bank[] __initconst = { EXYNOS_PIN_BANK_EINTW(8, 0xc60, "gph3", 0x0c), }; -const struct samsung_pin_ctrl s5pv210_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl s5pv210_pin_ctrl[] __initconst = { { /* pin-controller instance 0 data */ .pin_banks = s5pv210_pin_bank, @@ -137,6 +137,11 @@ const struct samsung_pin_ctrl s5pv210_pin_ctrl[] __initconst = { }, }; +const struct samsung_pinctrl_of_match_data s5pv210_of_data __initconst = { + .ctrl = s5pv210_pin_ctrl, + .num_ctrl = ARRAY_SIZE(s5pv210_pin_ctrl), +}; + /* Pad retention control code for accessing PMU regmap */ static atomic_t exynos_shared_retention_refcnt; @@ -199,7 +204,7 @@ static const struct samsung_retention_data exynos3250_retention_data __initconst * Samsung pinctrl driver data for Exynos3250 SoC. Exynos3250 SoC includes * two gpio/pin-mux/pinconfig controllers. */ -const struct samsung_pin_ctrl exynos3250_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl exynos3250_pin_ctrl[] __initconst = { { /* pin-controller instance 0 data */ .pin_banks = exynos3250_pin_banks0, @@ -220,6 +225,11 @@ const struct samsung_pin_ctrl exynos3250_pin_ctrl[] __initconst = { }, }; +const struct samsung_pinctrl_of_match_data exynos3250_of_data __initconst = { + .ctrl = exynos3250_pin_ctrl, + .num_ctrl = ARRAY_SIZE(exynos3250_pin_ctrl), +}; + /* pin banks of exynos4210 pin-controller 0 */ static const struct samsung_pin_bank_data exynos4210_pin_banks0[] __initconst = { EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), @@ -303,7 +313,7 @@ static const struct samsung_retention_data exynos4_audio_retention_data __initco * Samsung pinctrl driver data for Exynos4210 SoC. Exynos4210 SoC includes * three gpio/pin-mux/pinconfig controllers. */ -const struct samsung_pin_ctrl exynos4210_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl exynos4210_pin_ctrl[] __initconst = { { /* pin-controller instance 0 data */ .pin_banks = exynos4210_pin_banks0, @@ -329,6 +339,11 @@ const struct samsung_pin_ctrl exynos4210_pin_ctrl[] __initconst = { }, }; +const struct samsung_pinctrl_of_match_data exynos4210_of_data __initconst = { + .ctrl = exynos4210_pin_ctrl, + .num_ctrl = ARRAY_SIZE(exynos4210_pin_ctrl), +}; + /* pin banks of exynos4x12 pin-controller 0 */ static const struct samsung_pin_bank_data exynos4x12_pin_banks0[] __initconst = { EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), @@ -391,7 +406,7 @@ static const struct samsung_pin_bank_data exynos4x12_pin_banks3[] __initconst = * Samsung pinctrl driver data for Exynos4x12 SoC. Exynos4x12 SoC includes * four gpio/pin-mux/pinconfig controllers. */ -const struct samsung_pin_ctrl exynos4x12_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl exynos4x12_pin_ctrl[] __initconst = { { /* pin-controller instance 0 data */ .pin_banks = exynos4x12_pin_banks0, @@ -427,6 +442,11 @@ const struct samsung_pin_ctrl exynos4x12_pin_ctrl[] __initconst = { }, }; +const struct samsung_pinctrl_of_match_data exynos4x12_of_data __initconst = { + .ctrl = exynos4x12_pin_ctrl, + .num_ctrl = ARRAY_SIZE(exynos4x12_pin_ctrl), +}; + /* pin banks of exynos5250 pin-controller 0 */ static const struct samsung_pin_bank_data exynos5250_pin_banks0[] __initconst = { EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), @@ -487,7 +507,7 @@ static const struct samsung_pin_bank_data exynos5250_pin_banks3[] __initconst = * Samsung pinctrl driver data for Exynos5250 SoC. Exynos5250 SoC includes * four gpio/pin-mux/pinconfig controllers. */ -const struct samsung_pin_ctrl exynos5250_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl exynos5250_pin_ctrl[] __initconst = { { /* pin-controller instance 0 data */ .pin_banks = exynos5250_pin_banks0, @@ -523,6 +543,11 @@ const struct samsung_pin_ctrl exynos5250_pin_ctrl[] __initconst = { }, }; +const struct samsung_pinctrl_of_match_data exynos5250_of_data __initconst = { + .ctrl = exynos5250_pin_ctrl, + .num_ctrl = ARRAY_SIZE(exynos5250_pin_ctrl), +}; + /* pin banks of exynos5260 pin-controller 0 */ static const struct samsung_pin_bank_data exynos5260_pin_banks0[] __initconst = { EXYNOS_PIN_BANK_EINTG(4, 0x000, "gpa0", 0x00), @@ -567,7 +592,7 @@ static const struct samsung_pin_bank_data exynos5260_pin_banks2[] __initconst = * Samsung pinctrl driver data for Exynos5260 SoC. Exynos5260 SoC includes * three gpio/pin-mux/pinconfig controllers. */ -const struct samsung_pin_ctrl exynos5260_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl exynos5260_pin_ctrl[] __initconst = { { /* pin-controller instance 0 data */ .pin_banks = exynos5260_pin_banks0, @@ -587,6 +612,11 @@ const struct samsung_pin_ctrl exynos5260_pin_ctrl[] __initconst = { }, }; +const struct samsung_pinctrl_of_match_data exynos5260_of_data __initconst = { + .ctrl = exynos5260_pin_ctrl, + .num_ctrl = ARRAY_SIZE(exynos5260_pin_ctrl), +}; + /* pin banks of exynos5410 pin-controller 0 */ static const struct samsung_pin_bank_data exynos5410_pin_banks0[] __initconst = { EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), @@ -657,7 +687,7 @@ static const struct samsung_pin_bank_data exynos5410_pin_banks3[] __initconst = * Samsung pinctrl driver data for Exynos5410 SoC. Exynos5410 SoC includes * four gpio/pin-mux/pinconfig controllers. */ -const struct samsung_pin_ctrl exynos5410_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl exynos5410_pin_ctrl[] __initconst = { { /* pin-controller instance 0 data */ .pin_banks = exynos5410_pin_banks0, @@ -690,6 +720,11 @@ const struct samsung_pin_ctrl exynos5410_pin_ctrl[] __initconst = { }, }; +const struct samsung_pinctrl_of_match_data exynos5410_of_data __initconst = { + .ctrl = exynos5410_pin_ctrl, + .num_ctrl = ARRAY_SIZE(exynos5410_pin_ctrl), +}; + /* pin banks of exynos5420 pin-controller 0 */ static const struct samsung_pin_bank_data exynos5420_pin_banks0[] __initconst = { EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpy7", 0x00), @@ -774,7 +809,7 @@ static const struct samsung_retention_data exynos5420_retention_data __initconst * Samsung pinctrl driver data for Exynos5420 SoC. Exynos5420 SoC includes * four gpio/pin-mux/pinconfig controllers. */ -const struct samsung_pin_ctrl exynos5420_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl exynos5420_pin_ctrl[] __initconst = { { /* pin-controller instance 0 data */ .pin_banks = exynos5420_pin_banks0, @@ -808,3 +843,8 @@ const struct samsung_pin_ctrl exynos5420_pin_ctrl[] __initconst = { .retention_data = &exynos4_audio_retention_data, }, }; + +const struct samsung_pinctrl_of_match_data exynos5420_of_data __initconst = { + .ctrl = exynos5420_pin_ctrl, + .num_ctrl = ARRAY_SIZE(exynos5420_pin_ctrl), +}; diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c index fc8f7833bec0..71c9d1d9f345 100644 --- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c +++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c @@ -175,7 +175,7 @@ static const struct samsung_retention_data exynos5433_fsys_retention_data __init * Samsung pinctrl driver data for Exynos5433 SoC. Exynos5433 SoC includes * ten gpio/pin-mux/pinconfig controllers. */ -const struct samsung_pin_ctrl exynos5433_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl exynos5433_pin_ctrl[] __initconst = { { /* pin-controller instance 0 data */ .pin_banks = exynos5433_pin_banks0, @@ -260,6 +260,11 @@ const struct samsung_pin_ctrl exynos5433_pin_ctrl[] __initconst = { }, }; +const struct samsung_pinctrl_of_match_data exynos5433_of_data __initconst = { + .ctrl = exynos5433_pin_ctrl, + .num_ctrl = ARRAY_SIZE(exynos5433_pin_ctrl), +}; + /* pin banks of exynos7 pin-controller - ALIVE */ static const struct samsung_pin_bank_data exynos7_pin_banks0[] __initconst = { EXYNOS_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00), @@ -339,7 +344,7 @@ static const struct samsung_pin_bank_data exynos7_pin_banks9[] __initconst = { EXYNOS_PIN_BANK_EINTG(4, 0x020, "gpz1", 0x04), }; -const struct samsung_pin_ctrl exynos7_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl exynos7_pin_ctrl[] __initconst = { { /* pin-controller instance 0 Alive data */ .pin_banks = exynos7_pin_banks0, @@ -392,3 +397,8 @@ const struct samsung_pin_ctrl exynos7_pin_ctrl[] __initconst = { .eint_gpio_init = exynos_eint_gpio_init, }, }; + +const struct samsung_pinctrl_of_match_data exynos7_of_data __initconst = { + .ctrl = exynos7_pin_ctrl, + .num_ctrl = ARRAY_SIZE(exynos7_pin_ctrl), +}; diff --git a/drivers/pinctrl/samsung/pinctrl-s3c24xx.c b/drivers/pinctrl/samsung/pinctrl-s3c24xx.c index 10187cb0e9b9..7e824e4d20f4 100644 --- a/drivers/pinctrl/samsung/pinctrl-s3c24xx.c +++ b/drivers/pinctrl/samsung/pinctrl-s3c24xx.c @@ -565,7 +565,7 @@ static const struct samsung_pin_bank_data s3c2412_pin_banks[] __initconst = { PIN_BANK_2BIT(13, 0x080, "gpj"), }; -const struct samsung_pin_ctrl s3c2412_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl s3c2412_pin_ctrl[] __initconst = { { .pin_banks = s3c2412_pin_banks, .nr_banks = ARRAY_SIZE(s3c2412_pin_banks), @@ -573,6 +573,11 @@ const struct samsung_pin_ctrl s3c2412_pin_ctrl[] __initconst = { }, }; +const struct samsung_pinctrl_of_match_data s3c2412_of_data __initconst = { + .ctrl = s3c2412_pin_ctrl, + .num_ctrl = ARRAY_SIZE(s3c2412_pin_ctrl), +}; + static const struct samsung_pin_bank_data s3c2416_pin_banks[] __initconst = { PIN_BANK_A(27, 0x000, "gpa"), PIN_BANK_2BIT(11, 0x010, "gpb"), @@ -587,7 +592,7 @@ static const struct samsung_pin_bank_data s3c2416_pin_banks[] __initconst = { PIN_BANK_2BIT(2, 0x100, "gpm"), }; -const struct samsung_pin_ctrl s3c2416_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl s3c2416_pin_ctrl[] __initconst = { { .pin_banks = s3c2416_pin_banks, .nr_banks = ARRAY_SIZE(s3c2416_pin_banks), @@ -595,6 +600,11 @@ const struct samsung_pin_ctrl s3c2416_pin_ctrl[] __initconst = { }, }; +const struct samsung_pinctrl_of_match_data s3c2416_of_data __initconst = { + .ctrl = s3c2416_pin_ctrl, + .num_ctrl = ARRAY_SIZE(s3c2416_pin_ctrl), +}; + static const struct samsung_pin_bank_data s3c2440_pin_banks[] __initconst = { PIN_BANK_A(25, 0x000, "gpa"), PIN_BANK_2BIT(11, 0x010, "gpb"), @@ -607,7 +617,7 @@ static const struct samsung_pin_bank_data s3c2440_pin_banks[] __initconst = { PIN_BANK_2BIT(13, 0x0d0, "gpj"), }; -const struct samsung_pin_ctrl s3c2440_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl s3c2440_pin_ctrl[] __initconst = { { .pin_banks = s3c2440_pin_banks, .nr_banks = ARRAY_SIZE(s3c2440_pin_banks), @@ -615,6 +625,11 @@ const struct samsung_pin_ctrl s3c2440_pin_ctrl[] __initconst = { }, }; +const struct samsung_pinctrl_of_match_data s3c2440_of_data __initconst = { + .ctrl = s3c2440_pin_ctrl, + .num_ctrl = ARRAY_SIZE(s3c2440_pin_ctrl), +}; + static const struct samsung_pin_bank_data s3c2450_pin_banks[] __initconst = { PIN_BANK_A(28, 0x000, "gpa"), PIN_BANK_2BIT(11, 0x010, "gpb"), @@ -630,10 +645,15 @@ static const struct samsung_pin_bank_data s3c2450_pin_banks[] __initconst = { PIN_BANK_2BIT(2, 0x100, "gpm"), }; -const struct samsung_pin_ctrl s3c2450_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl s3c2450_pin_ctrl[] __initconst = { { .pin_banks = s3c2450_pin_banks, .nr_banks = ARRAY_SIZE(s3c2450_pin_banks), .eint_wkup_init = s3c24xx_eint_init, }, }; + +const struct samsung_pinctrl_of_match_data s3c2450_of_data __initconst = { + .ctrl = s3c2450_pin_ctrl, + .num_ctrl = ARRAY_SIZE(s3c2450_pin_ctrl), +}; diff --git a/drivers/pinctrl/samsung/pinctrl-s3c64xx.c b/drivers/pinctrl/samsung/pinctrl-s3c64xx.c index 679628ac4b31..288e6567ceb1 100644 --- a/drivers/pinctrl/samsung/pinctrl-s3c64xx.c +++ b/drivers/pinctrl/samsung/pinctrl-s3c64xx.c @@ -789,7 +789,7 @@ static const struct samsung_pin_bank_data s3c64xx_pin_banks0[] __initconst = { * Samsung pinctrl driver data for S3C64xx SoC. S3C64xx SoC includes * one gpio/pin-mux/pinconfig controller. */ -const struct samsung_pin_ctrl s3c64xx_pin_ctrl[] __initconst = { +static const struct samsung_pin_ctrl s3c64xx_pin_ctrl[] __initconst = { { /* pin-controller instance 1 data */ .pin_banks = s3c64xx_pin_banks0, @@ -798,3 +798,8 @@ const struct samsung_pin_ctrl s3c64xx_pin_ctrl[] __initconst = { .eint_wkup_init = s3c64xx_eint_eint0_init, }, }; + +const struct samsung_pinctrl_of_match_data s3c64xx_of_data __initconst = { + .ctrl = s3c64xx_pin_ctrl, + .num_ctrl = ARRAY_SIZE(s3c64xx_pin_ctrl), +}; diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c index da58e4554137..336e88d7bdb9 100644 --- a/drivers/pinctrl/samsung/pinctrl-samsung.c +++ b/drivers/pinctrl/samsung/pinctrl-samsung.c @@ -942,12 +942,33 @@ static int samsung_gpiolib_register(struct platform_device *pdev, return 0; } +static const struct samsung_pin_ctrl * +samsung_pinctrl_get_soc_data_for_of_alias(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + const struct samsung_pinctrl_of_match_data *of_data; + int id; + + id = of_alias_get_id(node, "pinctrl"); + if (id < 0) { + dev_err(&pdev->dev, "failed to get alias id\n"); + return NULL; + } + + of_data = of_device_get_match_data(&pdev->dev); + if (id >= of_data->num_ctrl) { + dev_err(&pdev->dev, "invalid alias id %d\n", id); + return NULL; + } + + return &(of_data->ctrl[id]); +} + /* retrieve the soc specific data */ static const struct samsung_pin_ctrl * samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d, struct platform_device *pdev) { - int id; struct device_node *node = pdev->dev.of_node; struct device_node *np; const struct samsung_pin_bank_data *bdata; @@ -957,13 +978,9 @@ samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d, void __iomem *virt_base[SAMSUNG_PINCTRL_NUM_RESOURCES]; unsigned int i; - id = of_alias_get_id(node, "pinctrl"); - if (id < 0) { - dev_err(&pdev->dev, "failed to get alias id\n"); + ctrl = samsung_pinctrl_get_soc_data_for_of_alias(pdev); + if (!ctrl) return ERR_PTR(-ENOENT); - } - ctrl = of_device_get_match_data(&pdev->dev); - ctrl += id; d->suspend = ctrl->suspend; d->resume = ctrl->resume; @@ -1188,41 +1205,41 @@ static int __maybe_unused samsung_pinctrl_resume(struct device *dev) static const struct of_device_id samsung_pinctrl_dt_match[] = { #ifdef CONFIG_PINCTRL_EXYNOS_ARM { .compatible = "samsung,exynos3250-pinctrl", - .data = exynos3250_pin_ctrl }, + .data = &exynos3250_of_data }, { .compatible = "samsung,exynos4210-pinctrl", - .data = exynos4210_pin_ctrl }, + .data = &exynos4210_of_data }, { .compatible = "samsung,exynos4x12-pinctrl", - .data = exynos4x12_pin_ctrl }, + .data = &exynos4x12_of_data }, { .compatible = "samsung,exynos5250-pinctrl", - .data = exynos5250_pin_ctrl }, + .data = &exynos5250_of_data }, { .compatible = "samsung,exynos5260-pinctrl", - .data = exynos5260_pin_ctrl }, + .data = &exynos5260_of_data }, { .compatible = "samsung,exynos5410-pinctrl", - .data = exynos5410_pin_ctrl }, + .data = &exynos5410_of_data }, { .compatible = "samsung,exynos5420-pinctrl", - .data = exynos5420_pin_ctrl }, + .data = &exynos5420_of_data }, { .compatible = "samsung,s5pv210-pinctrl", - .data = s5pv210_pin_ctrl }, + .data = &s5pv210_of_data }, #endif #ifdef CONFIG_PINCTRL_EXYNOS_ARM64 { .compatible = "samsung,exynos5433-pinctrl", - .data = exynos5433_pin_ctrl }, + .data = &exynos5433_of_data }, { .compatible = "samsung,exynos7-pinctrl", - .data = exynos7_pin_ctrl }, + .data = &exynos7_of_data }, #endif #ifdef CONFIG_PINCTRL_S3C64XX { .compatible = "samsung,s3c64xx-pinctrl", - .data = s3c64xx_pin_ctrl }, + .data = &s3c64xx_of_data }, #endif #ifdef CONFIG_PINCTRL_S3C24XX { .compatible = "samsung,s3c2412-pinctrl", - .data = s3c2412_pin_ctrl }, + .data = &s3c2412_of_data }, { .compatible = "samsung,s3c2416-pinctrl", - .data = s3c2416_pin_ctrl }, + .data = &s3c2416_of_data }, { .compatible = "samsung,s3c2440-pinctrl", - .data = s3c2440_pin_ctrl }, + .data = &s3c2440_of_data }, { .compatible = "samsung,s3c2450-pinctrl", - .data = s3c2450_pin_ctrl }, + .data = &s3c2450_of_data }, #endif {}, }; diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h index e204f609823b..f0cda9424dfe 100644 --- a/drivers/pinctrl/samsung/pinctrl-samsung.h +++ b/drivers/pinctrl/samsung/pinctrl-samsung.h @@ -281,6 +281,16 @@ struct samsung_pinctrl_drv_data { void (*resume)(struct samsung_pinctrl_drv_data *); }; +/** + * struct samsung_pinctrl_of_match_data: OF match device specific configuration data. + * @ctrl: array of pin controller data. + * @num_ctrl: size of array @ctrl. + */ +struct samsung_pinctrl_of_match_data { + const struct samsung_pin_ctrl *ctrl; + unsigned int num_ctrl; +}; + /** * struct samsung_pin_group: represent group of pins of a pinmux function. * @name: name of the pin group, used to lookup the group. @@ -309,20 +319,20 @@ struct samsung_pmx_func { }; /* list of all exported SoC specific data */ -extern const struct samsung_pin_ctrl exynos3250_pin_ctrl[]; -extern const struct samsung_pin_ctrl exynos4210_pin_ctrl[]; -extern const struct samsung_pin_ctrl exynos4x12_pin_ctrl[]; -extern const struct samsung_pin_ctrl exynos5250_pin_ctrl[]; -extern const struct samsung_pin_ctrl exynos5260_pin_ctrl[]; -extern const struct samsung_pin_ctrl exynos5410_pin_ctrl[]; -extern const struct samsung_pin_ctrl exynos5420_pin_ctrl[]; -extern const struct samsung_pin_ctrl exynos5433_pin_ctrl[]; -extern const struct samsung_pin_ctrl exynos7_pin_ctrl[]; -extern const struct samsung_pin_ctrl s3c64xx_pin_ctrl[]; -extern const struct samsung_pin_ctrl s3c2412_pin_ctrl[]; -extern const struct samsung_pin_ctrl s3c2416_pin_ctrl[]; -extern const struct samsung_pin_ctrl s3c2440_pin_ctrl[]; -extern const struct samsung_pin_ctrl s3c2450_pin_ctrl[]; -extern const struct samsung_pin_ctrl s5pv210_pin_ctrl[]; +extern const struct samsung_pinctrl_of_match_data exynos3250_of_data; +extern const struct samsung_pinctrl_of_match_data exynos4210_of_data; +extern const struct samsung_pinctrl_of_match_data exynos4x12_of_data; +extern const struct samsung_pinctrl_of_match_data exynos5250_of_data; +extern const struct samsung_pinctrl_of_match_data exynos5260_of_data; +extern const struct samsung_pinctrl_of_match_data exynos5410_of_data; +extern const struct samsung_pinctrl_of_match_data exynos5420_of_data; +extern const struct samsung_pinctrl_of_match_data exynos5433_of_data; +extern const struct samsung_pinctrl_of_match_data exynos7_of_data; +extern const struct samsung_pinctrl_of_match_data s3c64xx_of_data; +extern const struct samsung_pinctrl_of_match_data s3c2412_of_data; +extern const struct samsung_pinctrl_of_match_data s3c2416_of_data; +extern const struct samsung_pinctrl_of_match_data s3c2440_of_data; +extern const struct samsung_pinctrl_of_match_data s3c2450_of_data; +extern const struct samsung_pinctrl_of_match_data s5pv210_of_data; #endif /* __PINCTRL_SAMSUNG_H */ -- cgit v1.2.3 From 3c3e4b3a708a9d6451052e348981f37d2b3e92b0 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 8 Mar 2018 12:31:53 +0300 Subject: iio: adc: meson-saradc: unlock on error in meson_sar_adc_lock() The meson_sar_adc_lock() function is not supposed to hold the "indio_dev->mlock" on the error path. Fixes: 3adbf3427330 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs") Signed-off-by: Dan Carpenter Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/meson_saradc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c index 29fa7736d80c..ede955d9b2a4 100644 --- a/drivers/iio/adc/meson_saradc.c +++ b/drivers/iio/adc/meson_saradc.c @@ -462,8 +462,10 @@ static int meson_sar_adc_lock(struct iio_dev *indio_dev) regmap_read(priv->regmap, MESON_SAR_ADC_DELAY, &val); } while (val & MESON_SAR_ADC_DELAY_BL30_BUSY && timeout--); - if (timeout < 0) + if (timeout < 0) { + mutex_unlock(&indio_dev->mlock); return -ETIMEDOUT; + } } return 0; -- cgit v1.2.3 From cc4e0036311fbb0b2cab7dc8f142f84ebd8b388b Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sat, 10 Mar 2018 16:21:32 +0000 Subject: Revert "iio: accel: st_accel: remove redundant pointer pdata" This reverts commit 585ed27d06151f98e39238298f43ee261314ae74. This removed code which was unused due to a bug in commit 7383d44b. To fix this bug the code is needed. Thus this revert. Signed-off-by: Michael Nosthoff Signed-off-by: Jonathan Cameron --- drivers/iio/accel/st_accel_core.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index 6fe995cf16a6..460aa58e0159 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -920,6 +920,8 @@ static const struct iio_trigger_ops st_accel_trigger_ops = { int st_accel_common_probe(struct iio_dev *indio_dev) { struct st_sensor_data *adata = iio_priv(indio_dev); + struct st_sensors_platform_data *pdata = + (struct st_sensors_platform_data *)adata->dev->platform_data; int irq = adata->get_irq_data_ready(indio_dev); int err; @@ -946,6 +948,9 @@ int st_accel_common_probe(struct iio_dev *indio_dev) &adata->sensor_settings->fs.fs_avl[0]; adata->odr = adata->sensor_settings->odr.odr_avl[0].hz; + if (!pdata) + pdata = (struct st_sensors_platform_data *)&default_accel_pdata; + err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data); if (err < 0) goto st_accel_power_off; -- cgit v1.2.3 From 8b438686a001db64c21782d04ef68111e53c45d9 Mon Sep 17 00:00:00 2001 From: Michael Nosthoff Date: Fri, 9 Mar 2018 10:02:45 +0100 Subject: iio: st_pressure: st_accel: pass correct platform data to init Commit 7383d44b added a pointer pdata which get set to the default platform_data when non was defined in the device. But it did not pass this pointer to the st_sensors_init_sensor call but still used the maybe uninitialized platform_data from dev. This breaks initialization when no platform_data is given and the optional st,drdy-int-pin devicetree option is not set. This commit fixes this. Cc: stable@vger.kernel.org Fixes: 7383d44b ("iio: st_pressure: st_accel: Initialise sensor platform data properly") Signed-off-by: Michael Nosthoff Signed-off-by: Jonathan Cameron --- drivers/iio/accel/st_accel_core.c | 2 +- drivers/iio/pressure/st_pressure_core.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index 460aa58e0159..3e6fd5a8ac5b 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -951,7 +951,7 @@ int st_accel_common_probe(struct iio_dev *indio_dev) if (!pdata) pdata = (struct st_sensors_platform_data *)&default_accel_pdata; - err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data); + err = st_sensors_init_sensor(indio_dev, pdata); if (err < 0) goto st_accel_power_off; diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 349e5c713c03..4ddb6cf7d401 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -640,7 +640,7 @@ int st_press_common_probe(struct iio_dev *indio_dev) press_data->sensor_settings->drdy_irq.int2.addr)) pdata = (struct st_sensors_platform_data *)&default_press_pdata; - err = st_sensors_init_sensor(indio_dev, press_data->dev->platform_data); + err = st_sensors_init_sensor(indio_dev, pdata); if (err < 0) goto st_press_power_off; -- cgit v1.2.3 From 8b834bff1b73dce46f4e9f5e84af6f73fed8b0ef Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 13 Mar 2018 17:42:39 +0800 Subject: scsi: hpsa: fix selection of reply queue Since commit 84676c1f21e8 ("genirq/affinity: assign vectors to all possible CPUs") we could end up with an MSI-X vector that did not have any online CPUs mapped. This would lead to I/O hangs since there was no CPU to receive the completion. Retrieve IRQ affinity information using pci_irq_get_affinity() and use this mapping to choose a reply queue. [mkp: tweaked commit desc] Cc: Hannes Reinecke Cc: "Martin K. Petersen" , Cc: James Bottomley , Cc: Christoph Hellwig , Cc: Don Brace Cc: Kashyap Desai Cc: Laurence Oberman Cc: Meelis Roos Cc: Artem Bityutskiy Cc: Mike Snitzer Fixes: 84676c1f21e8 ("genirq/affinity: assign vectors to all possible CPUs") Signed-off-by: Ming Lei Tested-by: Laurence Oberman Tested-by: Don Brace Tested-by: Artem Bityutskiy Acked-by: Don Brace Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- drivers/scsi/hpsa.c | 73 +++++++++++++++++++++++++++++++++++++++-------------- drivers/scsi/hpsa.h | 1 + 2 files changed, 55 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 87b260e403ec..31423b6dc26d 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -1045,11 +1045,7 @@ static void set_performant_mode(struct ctlr_info *h, struct CommandList *c, c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1); if (unlikely(!h->msix_vectors)) return; - if (likely(reply_queue == DEFAULT_REPLY_QUEUE)) - c->Header.ReplyQueue = - raw_smp_processor_id() % h->nreply_queues; - else - c->Header.ReplyQueue = reply_queue % h->nreply_queues; + c->Header.ReplyQueue = reply_queue; } } @@ -1063,10 +1059,7 @@ static void set_ioaccel1_performant_mode(struct ctlr_info *h, * Tell the controller to post the reply to the queue for this * processor. This seems to give the best I/O throughput. */ - if (likely(reply_queue == DEFAULT_REPLY_QUEUE)) - cp->ReplyQueue = smp_processor_id() % h->nreply_queues; - else - cp->ReplyQueue = reply_queue % h->nreply_queues; + cp->ReplyQueue = reply_queue; /* * Set the bits in the address sent down to include: * - performant mode bit (bit 0) @@ -1087,10 +1080,7 @@ static void set_ioaccel2_tmf_performant_mode(struct ctlr_info *h, /* Tell the controller to post the reply to the queue for this * processor. This seems to give the best I/O throughput. */ - if (likely(reply_queue == DEFAULT_REPLY_QUEUE)) - cp->reply_queue = smp_processor_id() % h->nreply_queues; - else - cp->reply_queue = reply_queue % h->nreply_queues; + cp->reply_queue = reply_queue; /* Set the bits in the address sent down to include: * - performant mode bit not used in ioaccel mode 2 * - pull count (bits 0-3) @@ -1109,10 +1099,7 @@ static void set_ioaccel2_performant_mode(struct ctlr_info *h, * Tell the controller to post the reply to the queue for this * processor. This seems to give the best I/O throughput. */ - if (likely(reply_queue == DEFAULT_REPLY_QUEUE)) - cp->reply_queue = smp_processor_id() % h->nreply_queues; - else - cp->reply_queue = reply_queue % h->nreply_queues; + cp->reply_queue = reply_queue; /* * Set the bits in the address sent down to include: * - performant mode bit not used in ioaccel mode 2 @@ -1157,6 +1144,8 @@ static void __enqueue_cmd_and_start_io(struct ctlr_info *h, { dial_down_lockup_detection_during_fw_flash(h, c); atomic_inc(&h->commands_outstanding); + + reply_queue = h->reply_map[raw_smp_processor_id()]; switch (c->cmd_type) { case CMD_IOACCEL1: set_ioaccel1_performant_mode(h, c, reply_queue); @@ -7376,6 +7365,26 @@ static void hpsa_disable_interrupt_mode(struct ctlr_info *h) h->msix_vectors = 0; } +static void hpsa_setup_reply_map(struct ctlr_info *h) +{ + const struct cpumask *mask; + unsigned int queue, cpu; + + for (queue = 0; queue < h->msix_vectors; queue++) { + mask = pci_irq_get_affinity(h->pdev, queue); + if (!mask) + goto fallback; + + for_each_cpu(cpu, mask) + h->reply_map[cpu] = queue; + } + return; + +fallback: + for_each_possible_cpu(cpu) + h->reply_map[cpu] = 0; +} + /* If MSI/MSI-X is supported by the kernel we will try to enable it on * controllers that are capable. If not, we use legacy INTx mode. */ @@ -7771,6 +7780,10 @@ static int hpsa_pci_init(struct ctlr_info *h) err = hpsa_interrupt_mode(h); if (err) goto clean1; + + /* setup mapping between CPU and reply queue */ + hpsa_setup_reply_map(h); + err = hpsa_pci_find_memory_BAR(h->pdev, &h->paddr); if (err) goto clean2; /* intmode+region, pci */ @@ -8480,6 +8493,28 @@ static struct workqueue_struct *hpsa_create_controller_wq(struct ctlr_info *h, return wq; } +static void hpda_free_ctlr_info(struct ctlr_info *h) +{ + kfree(h->reply_map); + kfree(h); +} + +static struct ctlr_info *hpda_alloc_ctlr_info(void) +{ + struct ctlr_info *h; + + h = kzalloc(sizeof(*h), GFP_KERNEL); + if (!h) + return NULL; + + h->reply_map = kzalloc(sizeof(*h->reply_map) * nr_cpu_ids, GFP_KERNEL); + if (!h->reply_map) { + kfree(h); + return NULL; + } + return h; +} + static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { int dac, rc; @@ -8517,7 +8552,7 @@ reinit_after_soft_reset: * the driver. See comments in hpsa.h for more info. */ BUILD_BUG_ON(sizeof(struct CommandList) % COMMANDLIST_ALIGNMENT); - h = kzalloc(sizeof(*h), GFP_KERNEL); + h = hpda_alloc_ctlr_info(); if (!h) { dev_err(&pdev->dev, "Failed to allocate controller head\n"); return -ENOMEM; @@ -8916,7 +8951,7 @@ static void hpsa_remove_one(struct pci_dev *pdev) h->lockup_detected = NULL; /* init_one 2 */ /* (void) pci_disable_pcie_error_reporting(pdev); */ /* init_one 1 */ - kfree(h); /* init_one 1 */ + hpda_free_ctlr_info(h); /* init_one 1 */ } static int hpsa_suspend(__attribute__((unused)) struct pci_dev *pdev, diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h index 018f980a701c..fb9f5e7f8209 100644 --- a/drivers/scsi/hpsa.h +++ b/drivers/scsi/hpsa.h @@ -158,6 +158,7 @@ struct bmic_controller_parameters { #pragma pack() struct ctlr_info { + unsigned int *reply_map; int ctlr; char devname[8]; char *product_name; -- cgit v1.2.3 From adbe552349f2d1e48357a00e564d26135e586634 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 13 Mar 2018 17:42:40 +0800 Subject: scsi: megaraid_sas: fix selection of reply queue Since commit 84676c1f21e8 ("genirq/affinity: assign vectors to all possible CPUs") we could end up with an MSI-X vector that did not have any online CPUs mapped. This would lead to I/O hangs since there was no CPU to receive the completion. Retrieve IRQ affinity information using pci_irq_get_affinity() and use this mapping to choose a reply queue. [mkp: tweaked commit desc] Cc: Hannes Reinecke Cc: "Martin K. Petersen" , Cc: James Bottomley , Cc: Christoph Hellwig , Cc: Don Brace Cc: Kashyap Desai Cc: Laurence Oberman Cc: Mike Snitzer Cc: Meelis Roos Cc: Artem Bityutskiy Fixes: 84676c1f21e8 ("genirq/affinity: assign vectors to all possible CPUs") Signed-off-by: Ming Lei Acked-by: Kashyap Desai Tested-by: Kashyap Desai Reviewed-by: Christoph Hellwig Tested-by: Artem Bityutskiy Signed-off-by: Martin K. Petersen --- drivers/scsi/megaraid/megaraid_sas.h | 1 + drivers/scsi/megaraid/megaraid_sas_base.c | 39 ++++++++++++++++++++++++++--- drivers/scsi/megaraid/megaraid_sas_fusion.c | 12 +++------ 3 files changed, 41 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index ba6503f37756..27fab8235ea5 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -2128,6 +2128,7 @@ enum MR_PD_TYPE { struct megasas_instance { + unsigned int *reply_map; __le32 *producer; dma_addr_t producer_h; __le32 *consumer; diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 0f1d88f272be..7b2bed5ab04c 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -5165,6 +5165,26 @@ skip_alloc: instance->use_seqnum_jbod_fp = false; } +static void megasas_setup_reply_map(struct megasas_instance *instance) +{ + const struct cpumask *mask; + unsigned int queue, cpu; + + for (queue = 0; queue < instance->msix_vectors; queue++) { + mask = pci_irq_get_affinity(instance->pdev, queue); + if (!mask) + goto fallback; + + for_each_cpu(cpu, mask) + instance->reply_map[cpu] = queue; + } + return; + +fallback: + for_each_possible_cpu(cpu) + instance->reply_map[cpu] = cpu % instance->msix_vectors; +} + /** * megasas_init_fw - Initializes the FW * @instance: Adapter soft state @@ -5343,6 +5363,8 @@ static int megasas_init_fw(struct megasas_instance *instance) goto fail_setup_irqs; } + megasas_setup_reply_map(instance); + dev_info(&instance->pdev->dev, "firmware supports msix\t: (%d)", fw_msix_count); dev_info(&instance->pdev->dev, @@ -6123,20 +6145,29 @@ static inline int megasas_alloc_mfi_ctrl_mem(struct megasas_instance *instance) */ static int megasas_alloc_ctrl_mem(struct megasas_instance *instance) { + instance->reply_map = kzalloc(sizeof(unsigned int) * nr_cpu_ids, + GFP_KERNEL); + if (!instance->reply_map) + return -ENOMEM; + switch (instance->adapter_type) { case MFI_SERIES: if (megasas_alloc_mfi_ctrl_mem(instance)) - return -ENOMEM; + goto fail; break; case VENTURA_SERIES: case THUNDERBOLT_SERIES: case INVADER_SERIES: if (megasas_alloc_fusion_context(instance)) - return -ENOMEM; + goto fail; break; } return 0; + fail: + kfree(instance->reply_map); + instance->reply_map = NULL; + return -ENOMEM; } /* @@ -6148,6 +6179,7 @@ static int megasas_alloc_ctrl_mem(struct megasas_instance *instance) */ static inline void megasas_free_ctrl_mem(struct megasas_instance *instance) { + kfree(instance->reply_map); if (instance->adapter_type == MFI_SERIES) { if (instance->producer) pci_free_consistent(instance->pdev, sizeof(u32), @@ -6540,7 +6572,6 @@ fail_io_attach: pci_free_irq_vectors(instance->pdev); fail_init_mfi: scsi_host_put(host); - fail_alloc_instance: pci_disable_device(pdev); @@ -6746,6 +6777,8 @@ megasas_resume(struct pci_dev *pdev) if (rval < 0) goto fail_reenable_msix; + megasas_setup_reply_map(instance); + if (instance->adapter_type != MFI_SERIES) { megasas_reset_reply_desc(instance); if (megasas_ioc_init_fusion(instance)) { diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index dc8e850fbfd2..5ec3b74e8aed 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -2641,11 +2641,8 @@ megasas_build_ldio_fusion(struct megasas_instance *instance, fp_possible = (io_info.fpOkForIo > 0) ? true : false; } - /* Use raw_smp_processor_id() for now until cmd->request->cpu is CPU - id by default, not CPU group id, otherwise all MSI-X queues won't - be utilized */ - cmd->request_desc->SCSIIO.MSIxIndex = instance->msix_vectors ? - raw_smp_processor_id() % instance->msix_vectors : 0; + cmd->request_desc->SCSIIO.MSIxIndex = + instance->reply_map[raw_smp_processor_id()]; praid_context = &io_request->RaidContext; @@ -2971,10 +2968,9 @@ megasas_build_syspd_fusion(struct megasas_instance *instance, } cmd->request_desc->SCSIIO.DevHandle = io_request->DevHandle; - cmd->request_desc->SCSIIO.MSIxIndex = - instance->msix_vectors ? - (raw_smp_processor_id() % instance->msix_vectors) : 0; + cmd->request_desc->SCSIIO.MSIxIndex = + instance->reply_map[raw_smp_processor_id()]; if (!fp_possible) { /* system pd firmware path */ -- cgit v1.2.3 From 2f31115e940c4afd49b99c33123534e2ac924ffb Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 13 Mar 2018 17:42:41 +0800 Subject: scsi: core: introduce force_blk_mq This patch introduces 'force_blk_mq' to the scsi_host_template so that drivers that have no desire to support the legacy I/O path can signal blk-mq only support. [mkp: commit desc] Cc: Omar Sandoval , Cc: "Martin K. Petersen" , Cc: James Bottomley , Cc: Christoph Hellwig , Cc: Don Brace Cc: Kashyap Desai Cc: Mike Snitzer Cc: Laurence Oberman Signed-off-by: Ming Lei Reviewed-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- drivers/scsi/hosts.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index dd9464920456..ef22b275d050 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -474,6 +474,7 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) shost->dma_boundary = 0xffffffff; shost->use_blk_mq = scsi_use_blk_mq; + shost->use_blk_mq = scsi_use_blk_mq || shost->hostt->force_blk_mq; device_initialize(&shost->shost_gendev); dev_set_name(&shost->shost_gendev, "host%d", shost->host_no); -- cgit v1.2.3 From b5b6e8c8d3b4cbeb447a0f10c7d5de3caa573299 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 13 Mar 2018 17:42:42 +0800 Subject: scsi: virtio_scsi: fix IO hang caused by automatic irq vector affinity Since commit 84676c1f21e8ff5 ("genirq/affinity: assign vectors to all possible CPUs") it is possible to end up in a scenario where only offline CPUs are mapped to an interrupt vector. This is only an issue for the legacy I/O path since with blk-mq/scsi-mq an I/O can't be submitted to a hardware queue if the queue isn't mapped to an online CPU. Fix this issue by forcing virtio-scsi to use blk-mq. [mkp: commit desc] Cc: Omar Sandoval , Cc: "Martin K. Petersen" , Cc: James Bottomley , Cc: Christoph Hellwig , Cc: Don Brace Cc: Kashyap Desai Cc: Paolo Bonzini Cc: Mike Snitzer Cc: Laurence Oberman Fixes: 84676c1f21e8 ("genirq/affinity: assign vectors to all possible CPUs") Signed-off-by: Ming Lei Reviewed-by: Hannes Reinecke Acked-by: Paolo Bonzini Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- drivers/scsi/virtio_scsi.c | 59 +++------------------------------------------- 1 file changed, 3 insertions(+), 56 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c index 7c28e8d4955a..54e3a0f6844c 100644 --- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -91,9 +91,6 @@ struct virtio_scsi_vq { struct virtio_scsi_target_state { seqcount_t tgt_seq; - /* Count of outstanding requests. */ - atomic_t reqs; - /* Currently active virtqueue for requests sent to this target. */ struct virtio_scsi_vq *req_vq; }; @@ -152,8 +149,6 @@ static void virtscsi_complete_cmd(struct virtio_scsi *vscsi, void *buf) struct virtio_scsi_cmd *cmd = buf; struct scsi_cmnd *sc = cmd->sc; struct virtio_scsi_cmd_resp *resp = &cmd->resp.cmd; - struct virtio_scsi_target_state *tgt = - scsi_target(sc->device)->hostdata; dev_dbg(&sc->device->sdev_gendev, "cmd %p response %u status %#02x sense_len %u\n", @@ -210,8 +205,6 @@ static void virtscsi_complete_cmd(struct virtio_scsi *vscsi, void *buf) } sc->scsi_done(sc); - - atomic_dec(&tgt->reqs); } static void virtscsi_vq_done(struct virtio_scsi *vscsi, @@ -580,10 +573,7 @@ static int virtscsi_queuecommand_single(struct Scsi_Host *sh, struct scsi_cmnd *sc) { struct virtio_scsi *vscsi = shost_priv(sh); - struct virtio_scsi_target_state *tgt = - scsi_target(sc->device)->hostdata; - atomic_inc(&tgt->reqs); return virtscsi_queuecommand(vscsi, &vscsi->req_vqs[0], sc); } @@ -596,55 +586,11 @@ static struct virtio_scsi_vq *virtscsi_pick_vq_mq(struct virtio_scsi *vscsi, return &vscsi->req_vqs[hwq]; } -static struct virtio_scsi_vq *virtscsi_pick_vq(struct virtio_scsi *vscsi, - struct virtio_scsi_target_state *tgt) -{ - struct virtio_scsi_vq *vq; - unsigned long flags; - u32 queue_num; - - local_irq_save(flags); - if (atomic_inc_return(&tgt->reqs) > 1) { - unsigned long seq; - - do { - seq = read_seqcount_begin(&tgt->tgt_seq); - vq = tgt->req_vq; - } while (read_seqcount_retry(&tgt->tgt_seq, seq)); - } else { - /* no writes can be concurrent because of atomic_t */ - write_seqcount_begin(&tgt->tgt_seq); - - /* keep previous req_vq if a reader just arrived */ - if (unlikely(atomic_read(&tgt->reqs) > 1)) { - vq = tgt->req_vq; - goto unlock; - } - - queue_num = smp_processor_id(); - while (unlikely(queue_num >= vscsi->num_queues)) - queue_num -= vscsi->num_queues; - tgt->req_vq = vq = &vscsi->req_vqs[queue_num]; - unlock: - write_seqcount_end(&tgt->tgt_seq); - } - local_irq_restore(flags); - - return vq; -} - static int virtscsi_queuecommand_multi(struct Scsi_Host *sh, struct scsi_cmnd *sc) { struct virtio_scsi *vscsi = shost_priv(sh); - struct virtio_scsi_target_state *tgt = - scsi_target(sc->device)->hostdata; - struct virtio_scsi_vq *req_vq; - - if (shost_use_blk_mq(sh)) - req_vq = virtscsi_pick_vq_mq(vscsi, sc); - else - req_vq = virtscsi_pick_vq(vscsi, tgt); + struct virtio_scsi_vq *req_vq = virtscsi_pick_vq_mq(vscsi, sc); return virtscsi_queuecommand(vscsi, req_vq, sc); } @@ -775,7 +721,6 @@ static int virtscsi_target_alloc(struct scsi_target *starget) return -ENOMEM; seqcount_init(&tgt->tgt_seq); - atomic_set(&tgt->reqs, 0); tgt->req_vq = &vscsi->req_vqs[0]; starget->hostdata = tgt; @@ -823,6 +768,7 @@ static struct scsi_host_template virtscsi_host_template_single = { .target_alloc = virtscsi_target_alloc, .target_destroy = virtscsi_target_destroy, .track_queue_depth = 1, + .force_blk_mq = 1, }; static struct scsi_host_template virtscsi_host_template_multi = { @@ -844,6 +790,7 @@ static struct scsi_host_template virtscsi_host_template_multi = { .target_destroy = virtscsi_target_destroy, .map_queues = virtscsi_map_queues, .track_queue_depth = 1, + .force_blk_mq = 1, }; #define virtscsi_config_get(vdev, fld) \ -- cgit v1.2.3 From c3506df85091ab41cf7716244c460e15136100c4 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 13 Mar 2018 17:42:43 +0800 Subject: scsi: virtio_scsi: unify scsi_host_template Now that virtio_scsi uses blk-mq exclusively, we can remove the scsi_host_template and associated plumbing for the legacy I/O path. [mkp: commit desc] Cc: Omar Sandoval , Cc: "Martin K. Petersen" , Cc: James Bottomley , Cc: Christoph Hellwig , Cc: Paolo Bonzini Cc: Mike Snitzer Cc: Laurence Oberman Cc: Hannes Reinecke Signed-off-by: Ming Lei Suggested-by: Christoph Hellwig , Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- drivers/scsi/virtio_scsi.c | 74 ++++++++++------------------------------------ 1 file changed, 15 insertions(+), 59 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c index 54e3a0f6844c..45d04631888a 100644 --- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -522,11 +522,20 @@ static void virtio_scsi_init_hdr_pi(struct virtio_device *vdev, } #endif -static int virtscsi_queuecommand(struct virtio_scsi *vscsi, - struct virtio_scsi_vq *req_vq, +static struct virtio_scsi_vq *virtscsi_pick_vq_mq(struct virtio_scsi *vscsi, + struct scsi_cmnd *sc) +{ + u32 tag = blk_mq_unique_tag(sc->request); + u16 hwq = blk_mq_unique_tag_to_hwq(tag); + + return &vscsi->req_vqs[hwq]; +} + +static int virtscsi_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc) { - struct Scsi_Host *shost = virtio_scsi_host(vscsi->vdev); + struct virtio_scsi *vscsi = shost_priv(shost); + struct virtio_scsi_vq *req_vq = virtscsi_pick_vq_mq(vscsi, sc); struct virtio_scsi_cmd *cmd = scsi_cmd_priv(sc); unsigned long flags; int req_size; @@ -569,32 +578,6 @@ static int virtscsi_queuecommand(struct virtio_scsi *vscsi, return 0; } -static int virtscsi_queuecommand_single(struct Scsi_Host *sh, - struct scsi_cmnd *sc) -{ - struct virtio_scsi *vscsi = shost_priv(sh); - - return virtscsi_queuecommand(vscsi, &vscsi->req_vqs[0], sc); -} - -static struct virtio_scsi_vq *virtscsi_pick_vq_mq(struct virtio_scsi *vscsi, - struct scsi_cmnd *sc) -{ - u32 tag = blk_mq_unique_tag(sc->request); - u16 hwq = blk_mq_unique_tag_to_hwq(tag); - - return &vscsi->req_vqs[hwq]; -} - -static int virtscsi_queuecommand_multi(struct Scsi_Host *sh, - struct scsi_cmnd *sc) -{ - struct virtio_scsi *vscsi = shost_priv(sh); - struct virtio_scsi_vq *req_vq = virtscsi_pick_vq_mq(vscsi, sc); - - return virtscsi_queuecommand(vscsi, req_vq, sc); -} - static int virtscsi_tmf(struct virtio_scsi *vscsi, struct virtio_scsi_cmd *cmd) { DECLARE_COMPLETION_ONSTACK(comp); @@ -750,34 +733,13 @@ static enum blk_eh_timer_return virtscsi_eh_timed_out(struct scsi_cmnd *scmnd) return BLK_EH_RESET_TIMER; } -static struct scsi_host_template virtscsi_host_template_single = { - .module = THIS_MODULE, - .name = "Virtio SCSI HBA", - .proc_name = "virtio_scsi", - .this_id = -1, - .cmd_size = sizeof(struct virtio_scsi_cmd), - .queuecommand = virtscsi_queuecommand_single, - .change_queue_depth = virtscsi_change_queue_depth, - .eh_abort_handler = virtscsi_abort, - .eh_device_reset_handler = virtscsi_device_reset, - .eh_timed_out = virtscsi_eh_timed_out, - .slave_alloc = virtscsi_device_alloc, - - .dma_boundary = UINT_MAX, - .use_clustering = ENABLE_CLUSTERING, - .target_alloc = virtscsi_target_alloc, - .target_destroy = virtscsi_target_destroy, - .track_queue_depth = 1, - .force_blk_mq = 1, -}; - -static struct scsi_host_template virtscsi_host_template_multi = { +static struct scsi_host_template virtscsi_host_template = { .module = THIS_MODULE, .name = "Virtio SCSI HBA", .proc_name = "virtio_scsi", .this_id = -1, .cmd_size = sizeof(struct virtio_scsi_cmd), - .queuecommand = virtscsi_queuecommand_multi, + .queuecommand = virtscsi_queuecommand, .change_queue_depth = virtscsi_change_queue_depth, .eh_abort_handler = virtscsi_abort, .eh_device_reset_handler = virtscsi_device_reset, @@ -883,7 +845,6 @@ static int virtscsi_probe(struct virtio_device *vdev) u32 sg_elems, num_targets; u32 cmd_per_lun; u32 num_queues; - struct scsi_host_template *hostt; if (!vdev->config->get) { dev_err(&vdev->dev, "%s failure: config access disabled\n", @@ -896,12 +857,7 @@ static int virtscsi_probe(struct virtio_device *vdev) num_targets = virtscsi_config_get(vdev, max_target) + 1; - if (num_queues == 1) - hostt = &virtscsi_host_template_single; - else - hostt = &virtscsi_host_template_multi; - - shost = scsi_host_alloc(hostt, + shost = scsi_host_alloc(&virtscsi_host_template, sizeof(*vscsi) + sizeof(vscsi->req_vqs[0]) * num_queues); if (!shost) return -ENOMEM; -- cgit v1.2.3 From 09dd15e0d9547ca424de4043bcd429bab6f285c8 Mon Sep 17 00:00:00 2001 From: Brian King Date: Wed, 14 Mar 2018 17:13:39 -0500 Subject: scsi: ibmvfc: Avoid unnecessary port relogin Following an RSCN, ibmvfc will issue an ADISC to determine if the underlying target has changed, comparing the SCSI ID, WWPN, and WWNN to determine how to handle the rport in discovery. However, the comparison of the WWPN and WWNN was performing a memcmp between a big endian field against a CPU endian field, which resulted in the wrong answer on LE systems. This was observed as unexpected errors getting logged at boot time as targets were getting relogins when not needed. Signed-off-by: Brian King Signed-off-by: Martin K. Petersen --- drivers/scsi/ibmvscsi/ibmvfc.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index b1b1d3a3b173..daefe8172b04 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -3579,11 +3579,9 @@ static void ibmvfc_tgt_implicit_logout(struct ibmvfc_target *tgt) static int ibmvfc_adisc_needs_plogi(struct ibmvfc_passthru_mad *mad, struct ibmvfc_target *tgt) { - if (memcmp(&mad->fc_iu.response[2], &tgt->ids.port_name, - sizeof(tgt->ids.port_name))) + if (wwn_to_u64((u8 *)&mad->fc_iu.response[2]) != tgt->ids.port_name) return 1; - if (memcmp(&mad->fc_iu.response[4], &tgt->ids.node_name, - sizeof(tgt->ids.node_name))) + if (wwn_to_u64((u8 *)&mad->fc_iu.response[4]) != tgt->ids.node_name) return 1; if (be32_to_cpu(mad->fc_iu.response[6]) != tgt->scsi_id) return 1; -- cgit v1.2.3 From 6de564939e14327148e31ddcf769e34105176447 Mon Sep 17 00:00:00 2001 From: OuYang ZhiZhong Date: Sun, 11 Mar 2018 15:59:07 +0800 Subject: mtdchar: fix usage of mtd_ooblayout_ecc() Section was not properly computed. The value of OOB region definition is always ECC section 0 information in the OOB area, but we want to get all the ECC bytes information, so we should call mtd_ooblayout_ecc(mtd, section++, &oobregion) until it returns -ERANGE. Fixes: c2b78452a9db ("mtd: use mtd_ooblayout_xxx() helpers where appropriate") Cc: Signed-off-by: OuYang ZhiZhong Signed-off-by: Boris Brezillon --- drivers/mtd/mtdchar.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index de8c902059b8..7d80a8bb96fe 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -479,7 +479,7 @@ static int shrink_ecclayout(struct mtd_info *mtd, for (i = 0; i < MTD_MAX_ECCPOS_ENTRIES;) { u32 eccpos; - ret = mtd_ooblayout_ecc(mtd, section, &oobregion); + ret = mtd_ooblayout_ecc(mtd, section++, &oobregion); if (ret < 0) { if (ret != -ERANGE) return ret; @@ -526,7 +526,7 @@ static int get_oobinfo(struct mtd_info *mtd, struct nand_oobinfo *to) for (i = 0; i < ARRAY_SIZE(to->eccpos);) { u32 eccpos; - ret = mtd_ooblayout_ecc(mtd, section, &oobregion); + ret = mtd_ooblayout_ecc(mtd, section++, &oobregion); if (ret < 0) { if (ret != -ERANGE) return ret; -- cgit v1.2.3 From 4c41aa24baa4ed338241d05494f2c595c885af8f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 19 Mar 2018 14:07:45 +0300 Subject: staging: ncpfs: memory corruption in ncp_read_kernel() If the server is malicious then *bytes_read could be larger than the size of the "target" buffer. It would lead to memory corruption when we do the memcpy(). Reported-by: Dr Silvio Cesare of InfoSect Signed-off-by: Dan Carpenter Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/ncpfs/ncplib_kernel.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/staging/ncpfs/ncplib_kernel.c b/drivers/staging/ncpfs/ncplib_kernel.c index 804adfebba2f..3e047eb4cc7c 100644 --- a/drivers/staging/ncpfs/ncplib_kernel.c +++ b/drivers/staging/ncpfs/ncplib_kernel.c @@ -981,6 +981,10 @@ ncp_read_kernel(struct ncp_server *server, const char *file_id, goto out; } *bytes_read = ncp_reply_be16(server, 0); + if (*bytes_read > to_read) { + result = -EINVAL; + goto out; + } source = ncp_reply_data(server, 2 + (offset & 1)); memcpy(target, source, *bytes_read); -- cgit v1.2.3 From 597d74005ba85e87c256cd732128ebf7faf54247 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Wed, 14 Mar 2018 12:15:56 -0400 Subject: scsi: sd: Remember that READ CAPACITY(16) succeeded The USB storage glue sets the try_rc_10_first flag in an attempt to avoid wedging poorly implemented legacy USB devices. If the device capacity is too large to be expressed in the provided response buffer field of READ CAPACITY(10), a well-behaved device will set the reported capacity to 0xFFFFFFFF. We will then attempt to issue a READ CAPACITY(16) to obtain the real capacity. Since this part of the discovery logic is not covered by the first_scan flag, a warning will be printed a couple of times times per revalidate attempt if we upgrade from READ CAPACITY(10) to READ CAPACITY(16). Remember that we have successfully issued READ CAPACITY(16) so we can take the fast path on subsequent revalidate attempts. Reported-by: Menion Reviewed-by: Laurence Oberman Signed-off-by: Martin K. Petersen --- drivers/scsi/sd.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 3b45f7fc5620..13ec1b5ef75c 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2513,6 +2513,8 @@ sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer) sector_size = old_sector_size; goto got_data; } + /* Remember that READ CAPACITY(16) succeeded */ + sdp->try_rc_10_first = 0; } } -- cgit v1.2.3 From 89d0c804392bb962553f23dc4c119d11b6bd1675 Mon Sep 17 00:00:00 2001 From: Jianchao Wang Date: Wed, 7 Mar 2018 20:29:03 +0800 Subject: scsi: iscsi_tcp: set BDI_CAP_STABLE_WRITES when data digest enabled iscsi tcp will first send out data, then calculate and send data digest. If we don't have BDI_CAP_STABLE_WRITES, the page cache will be written in spite of the on going writeback. Consequently, wrong digest will be got and sent to target. To fix this, set BDI_CAP_STABLE_WRITES when data digest is enabled in iscsi_tcp .slave_configure callback. Signed-off-by: Jianchao Wang Acked-by: Chris Leech Acked-by: Lee Duncan Signed-off-by: Martin K. Petersen --- drivers/scsi/iscsi_tcp.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 6198559abbd8..dd66c11399a2 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include #include @@ -954,6 +955,13 @@ static int iscsi_sw_tcp_slave_alloc(struct scsi_device *sdev) static int iscsi_sw_tcp_slave_configure(struct scsi_device *sdev) { + struct iscsi_sw_tcp_host *tcp_sw_host = iscsi_host_priv(sdev->host); + struct iscsi_session *session = tcp_sw_host->session; + struct iscsi_conn *conn = session->leadconn; + + if (conn->datadgst_en) + sdev->request_queue->backing_dev_info->capabilities + |= BDI_CAP_STABLE_WRITES; blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_ANY); blk_queue_dma_alignment(sdev->request_queue, 0); return 0; -- cgit v1.2.3 From fa8e6d58c5bc260f4369c6699683d69695daed0a Mon Sep 17 00:00:00 2001 From: Jagdish Gediya Date: Wed, 21 Mar 2018 04:31:36 +0530 Subject: mtd: nand: fsl_ifc: Fix nand waitfunc return value As per the IFC hardware manual, Most significant 2 bytes in nand_fsr register are the outcome of NAND READ STATUS command. So status value need to be shifted and aligned as per the nand framework requirement. Fixes: 82771882d960 ("NAND Machine support for Integrated Flash Controller") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Jagdish Gediya Reviewed-by: Prabhakar Kushwaha Signed-off-by: Boris Brezillon --- drivers/mtd/nand/fsl_ifc_nand.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index 4872a7ba6503..b6a3ba445cfb 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -626,6 +626,7 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip) struct fsl_ifc_ctrl *ctrl = priv->ctrl; struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs; u32 nand_fsr; + int status; /* Use READ_STATUS command, but wait for the device to be ready */ ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | @@ -640,12 +641,12 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip) fsl_ifc_run_command(mtd); nand_fsr = ifc_in32(&ifc->ifc_nand.nand_fsr); - + status = nand_fsr >> 24; /* * The chip always seems to report that it is * write-protected, even when it is not. */ - return nand_fsr | NAND_STATUS_WP; + return status | NAND_STATUS_WP; } /* -- cgit v1.2.3 From 843c3a59997f18060848b8632607dd04781b52d1 Mon Sep 17 00:00:00 2001 From: Jagdish Gediya Date: Wed, 21 Mar 2018 05:51:46 +0530 Subject: mtd: nand: fsl_ifc: Fix eccstat array overflow for IFC ver >= 2.0.0 Number of ECC status registers i.e. (ECCSTATx) has been increased in IFC version 2.0.0 due to increase in SRAM size. This is causing eccstat array to over flow. So, replace eccstat array with u32 variable to make it fail-safe and independent of number of ECC status registers or SRAM size. Fixes: bccb06c353af ("mtd: nand: ifc: update bufnum mask for ver >= 2.0.0") Cc: stable@vger.kernel.org # 3.18+ Signed-off-by: Prabhakar Kushwaha Signed-off-by: Jagdish Gediya Signed-off-by: Boris Brezillon --- drivers/mtd/nand/fsl_ifc_nand.c | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index b6a3ba445cfb..fae01b04abc7 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -173,14 +173,9 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob) /* returns nonzero if entire page is blank */ static int check_read_ecc(struct mtd_info *mtd, struct fsl_ifc_ctrl *ctrl, - u32 *eccstat, unsigned int bufnum) + u32 eccstat, unsigned int bufnum) { - u32 reg = eccstat[bufnum / 4]; - int errors; - - errors = (reg >> ((3 - bufnum % 4) * 8)) & 15; - - return errors; + return (eccstat >> ((3 - bufnum % 4) * 8)) & 15; } /* @@ -193,7 +188,7 @@ static void fsl_ifc_run_command(struct mtd_info *mtd) struct fsl_ifc_ctrl *ctrl = priv->ctrl; struct fsl_ifc_nand_ctrl *nctrl = ifc_nand_ctrl; struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs; - u32 eccstat[4]; + u32 eccstat; int i; /* set the chip select for NAND Transaction */ @@ -228,8 +223,8 @@ static void fsl_ifc_run_command(struct mtd_info *mtd) if (nctrl->eccread) { int errors; int bufnum = nctrl->page & priv->bufnum_mask; - int sector = bufnum * chip->ecc.steps; - int sector_end = sector + chip->ecc.steps - 1; + int sector_start = bufnum * chip->ecc.steps; + int sector_end = sector_start + chip->ecc.steps - 1; __be32 *eccstat_regs; if (ctrl->version >= FSL_IFC_VERSION_2_0_0) @@ -237,10 +232,12 @@ static void fsl_ifc_run_command(struct mtd_info *mtd) else eccstat_regs = ifc->ifc_nand.v1_nand_eccstat; - for (i = sector / 4; i <= sector_end / 4; i++) - eccstat[i] = ifc_in32(&eccstat_regs[i]); + eccstat = ifc_in32(&eccstat_regs[sector_start / 4]); + + for (i = sector_start; i <= sector_end; i++) { + if (i != sector_start && !(i % 4)) + eccstat = ifc_in32(&eccstat_regs[i / 4]); - for (i = sector; i <= sector_end; i++) { errors = check_read_ecc(mtd, ctrl, eccstat, i); if (errors == 15) { -- cgit v1.2.3 From 6b00c35138b404be98b85f4a703be594cbed501c Mon Sep 17 00:00:00 2001 From: Jagdish Gediya Date: Thu, 22 Mar 2018 01:08:10 +0530 Subject: mtd: nand: fsl_ifc: Read ECCSTAT0 and ECCSTAT1 registers for IFC 2.0 Due to missing information in Hardware manual, current implementation doesn't read ECCSTAT0 and ECCSTAT1 registers for IFC 2.0. Add support to read ECCSTAT0 and ECCSTAT1 registers during ecccheck for IFC 2.0. Fixes: 656441478ed5 ("mtd: nand: ifc: Fix location of eccstat registers for IFC V1.0") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Jagdish Gediya Reviewed-by: Prabhakar Kushwaha Signed-off-by: Boris Brezillon --- drivers/mtd/nand/fsl_ifc_nand.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index fae01b04abc7..5a9c2f0020c2 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -227,11 +227,7 @@ static void fsl_ifc_run_command(struct mtd_info *mtd) int sector_end = sector_start + chip->ecc.steps - 1; __be32 *eccstat_regs; - if (ctrl->version >= FSL_IFC_VERSION_2_0_0) - eccstat_regs = ifc->ifc_nand.v2_nand_eccstat; - else - eccstat_regs = ifc->ifc_nand.v1_nand_eccstat; - + eccstat_regs = ifc->ifc_nand.nand_eccstat; eccstat = ifc_in32(&eccstat_regs[sector_start / 4]); for (i = sector_start; i <= sector_end; i++) { -- cgit v1.2.3 From 32927e281c004c352c0b88d2975f5511e5b7cf8e Mon Sep 17 00:00:00 2001 From: Mark Bloch Date: Tue, 20 Mar 2018 15:45:37 +0200 Subject: IB/mlx5: Don't clean uninitialized UMR resources In case we failed to create UMR resources, mark them as invalid so we won't try to destroy them on the unwind path. Add the relevant checks to destroy_umrc_res(), this is done for the unlikely event ib_register_device() or create_umr_res() err out and we try to destroy invalid objects. Fixes: 42cea83f9524 ("IB/mlx5: Fix cleanup order on unload") Signed-off-by: Mark Bloch Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/main.c | 12 +++++++++--- drivers/infiniband/hw/mlx5/mr.c | 3 +++ 2 files changed, 12 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index da091de4e69d..7f8bda3a2005 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -3448,9 +3448,12 @@ static void destroy_umrc_res(struct mlx5_ib_dev *dev) if (err) mlx5_ib_warn(dev, "mr cache cleanup failed\n"); - mlx5_ib_destroy_qp(dev->umrc.qp); - ib_free_cq(dev->umrc.cq); - ib_dealloc_pd(dev->umrc.pd); + if (dev->umrc.qp) + mlx5_ib_destroy_qp(dev->umrc.qp); + if (dev->umrc.cq) + ib_free_cq(dev->umrc.cq); + if (dev->umrc.pd) + ib_dealloc_pd(dev->umrc.pd); } enum { @@ -3552,12 +3555,15 @@ static int create_umr_res(struct mlx5_ib_dev *dev) error_4: mlx5_ib_destroy_qp(qp); + dev->umrc.qp = NULL; error_3: ib_free_cq(cq); + dev->umrc.cq = NULL; error_2: ib_dealloc_pd(pd); + dev->umrc.pd = NULL; error_0: kfree(attr); diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c index c51c602f06d6..3e0b3f0238d6 100644 --- a/drivers/infiniband/hw/mlx5/mr.c +++ b/drivers/infiniband/hw/mlx5/mr.c @@ -739,6 +739,9 @@ int mlx5_mr_cache_cleanup(struct mlx5_ib_dev *dev) { int i; + if (!dev->cache.wq) + return 0; + dev->cache.stopped = 1; flush_workqueue(dev->cache.wq); -- cgit v1.2.3 From 103140eccbd2e3d56bcd366eba3e657f5d358bf5 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Wed, 21 Mar 2018 09:00:29 +0200 Subject: RDMA/restrack: Move restrack_clean to be symmetrical to restrack_init The fact that resource tracking commit 02d8883f520e ("RDMA/restrack: Add general infrastructure to track RDMA resources") was added immediately after commit 16c1975f1032 ("IB/mlx5: Create profile infrastructure to add and remove stages") caused us to miss the fact that PD and CQ are created after ib_register_device, but released after ib_unregister_device() and not before as it is expected from normal flow. Fix introduced in commit 42cea83f9524 ("IB/mlx5: Fix cleanup order on unload") revealed this fact, so this patch is needed to avoid from restrack warnings It fixes resource tracking warnings during shutdown. [ 43.473906] CPU: 5 PID: 3016 Comm: modprobe Not tainted 4.16.0-rc5-for-linust-perf-2018-03-19_07-01-58-14 #1 [ 43.473907] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 43.473919] RIP: 0010:rdma_restrack_clean+0x25/0x30 [ib_core] [ 43.473921] RSP: 0018:ffffc9000267be48 EFLAGS: 00010282 [ 43.473924] RAX: 0000000000000000 RBX: ffff88033c690070 RCX: 0000000180080006 [ 43.473925] RDX: ffff88035ce922e0 RSI: ffffea000cf1a200 RDI: ffff88033c6907c8 [ 43.473926] RBP: ffff88033c690070 R08: ffff88033c689000 R09: 0000000180080006 [ 43.473927] R10: 000000003c68a001 R11: ffff88033c689000 R12: ffff88033c690000 [ 43.473929] R13: ffff88033c69005c R14: 0000000000000000 R15: 0000000000000000 [ 43.473932] FS: 00007f5928359740(0000) GS:ffff88036c540000(0000) knlGS:0000000000000000 [ 43.473933] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 43.473935] CR2: 00007ffffc760cc8 CR3: 000000035620c000 CR4: 00000000000006e0 [ 43.473940] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 43.473941] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 43.473942] Call Trace: [ 43.473969] ib_unregister_device+0xf5/0x190 [ib_core] [ 43.474000] __mlx5_ib_remove+0x2e/0x40 [mlx5_ib] [ 43.474098] mlx5_remove_device+0xf5/0x120 [mlx5_core] [ 43.474132] mlx5_unregister_interface+0x37/0x90 [mlx5_core] [ 43.474142] mlx5_ib_cleanup+0xc/0x16a [mlx5_ib] [ 43.474152] SyS_delete_module+0x159/0x260 [ 43.474159] do_syscall_64+0x61/0x110 [ 43.474165] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 43.474168] RIP: 0033:0x7f59278466b7 [ 43.474170] RSP: 002b:00007ffffc763e38 EFLAGS: 00000202 ORIG_RAX: 00000000000000b0 [ 43.474172] RAX: ffffffffffffffda RBX: 000000000130d590 RCX: 00007f59278466b7 [ 43.474173] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000000000130d5f8 [ 43.474175] RBP: 0000000000000000 R08: 00007f5927b0b060 R09: 00007f59278b6a40 [ 43.474176] R10: 00007ffffc763bc0 R11: 0000000000000202 R12: 0000000000000000 [ 43.474177] R13: 0000000000000001 R14: 000000000130d5f8 R15: 0000000000000000 [ 43.474179] Code: 84 00 00 00 00 00 0f 1f 44 00 00 48 83 c7 28 31 c0 eb 0c 48 83 c0 08 48 3d 00 08 00 00 74 0f 48 8d 14 07 48 8b 12 48 85 d2 74 e8 <0f> 0b c3 f3 c3 66 0f 1f 44 00 00 0f 1f 44 00 00 53 48 8b 47 28 [ 43.474221] ---[ end trace e89771e2250ffc23 ]--- Fixes: 42cea83f9524 ("IB/mlx5: Fix cleanup order on unload") Reviewed-by: Mark Bloch Signed-off-by: Parav Pandit Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/device.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c index bb065c9449be..b7459cf524e4 100644 --- a/drivers/infiniband/core/device.c +++ b/drivers/infiniband/core/device.c @@ -290,6 +290,7 @@ void ib_dealloc_device(struct ib_device *device) { WARN_ON(device->reg_state != IB_DEV_UNREGISTERED && device->reg_state != IB_DEV_UNINITIALIZED); + rdma_restrack_clean(&device->res); put_device(&device->dev); } EXPORT_SYMBOL(ib_dealloc_device); @@ -600,8 +601,6 @@ void ib_unregister_device(struct ib_device *device) } up_read(&lists_rwsem); - rdma_restrack_clean(&device->res); - ib_device_unregister_rdmacg(device); ib_device_unregister_sysfs(device); -- cgit v1.2.3 From 5f3e3b85cc0a5eae1c46d72e47d3de7bf208d9e2 Mon Sep 17 00:00:00 2001 From: Chien Tin Tung Date: Wed, 21 Mar 2018 13:09:25 -0500 Subject: RDMA/ucma: Correct option size check using optlen The option size check is using optval instead of optlen causing the set option call to fail. Use the correct field, optlen, for size check. Fixes: 6a21dfc0d0db ("RDMA/ucma: Limit possible option size") Signed-off-by: Chien Tin Tung Signed-off-by: Shiraz Saleem Reviewed-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/ucma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c index e5a1e7d81326..60449d611fb4 100644 --- a/drivers/infiniband/core/ucma.c +++ b/drivers/infiniband/core/ucma.c @@ -1307,7 +1307,7 @@ static ssize_t ucma_set_option(struct ucma_file *file, const char __user *inbuf, if (IS_ERR(ctx)) return PTR_ERR(ctx); - if (unlikely(cmd.optval > KMALLOC_MAX_SIZE)) + if (unlikely(cmd.optlen > KMALLOC_MAX_SIZE)) return -EINVAL; optval = memdup_user((void __user *) (unsigned long) cmd.optval, -- cgit v1.2.3 From c3594f22302cca5e924e47ec1cc8edd265708f41 Mon Sep 17 00:00:00 2001 From: "Kalderon, Michal" Date: Wed, 21 Mar 2018 14:51:50 +0200 Subject: RDMA/qedr: fix QP's ack timeout configuration QPs that were configured with ack timeout value lower than 1 msec will not implement re-transmission timeout. This means that if a packet / ACK were dropped, the QP will not retransmit this packet. This can lead to an application hang. Fixes: cecbcddf6 ("qedr: Add support for QP verbs") Signed-off-by: Michal Kalderon Signed-off-by: Ariel Elior Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/qedr/verbs.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c index 875b17272d65..716fae063122 100644 --- a/drivers/infiniband/hw/qedr/verbs.c +++ b/drivers/infiniband/hw/qedr/verbs.c @@ -2086,18 +2086,23 @@ int qedr_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, SET_FIELD(qp_params.modify_flags, QED_ROCE_MODIFY_QP_VALID_ACK_TIMEOUT, 1); - qp_params.ack_timeout = attr->timeout; - if (attr->timeout) { - u32 temp; - - temp = 4096 * (1UL << attr->timeout) / 1000 / 1000; - /* FW requires [msec] */ - qp_params.ack_timeout = temp; - } else { - /* Infinite */ + /* The received timeout value is an exponent used like this: + * "12.7.34 LOCAL ACK TIMEOUT + * Value representing the transport (ACK) timeout for use by + * the remote, expressed as: 4.096 * 2^timeout [usec]" + * The FW expects timeout in msec so we need to divide the usec + * result by 1000. We'll approximate 1000~2^10, and 4.096 ~ 2^2, + * so we get: 2^2 * 2^timeout / 2^10 = 2^(timeout - 8). + * The value of zero means infinite so we use a 'max_t' to make + * sure that sub 1 msec values will be configured as 1 msec. + */ + if (attr->timeout) + qp_params.ack_timeout = + 1 << max_t(int, attr->timeout - 8, 0); + else qp_params.ack_timeout = 0; - } } + if (attr_mask & IB_QP_RETRY_CNT) { SET_FIELD(qp_params.modify_flags, QED_ROCE_MODIFY_QP_VALID_RETRY_CNT, 1); -- cgit v1.2.3 From b15606f47b89b0b09936d7f45b59ba6275527041 Mon Sep 17 00:00:00 2001 From: "Kalderon, Michal" Date: Wed, 21 Mar 2018 14:51:51 +0200 Subject: RDMA/qedr: Fix rc initialization on CNQ allocation failure Return code wasn't set properly when CNQ allocation failed. This only affect error message logging, currently user will receive an error message that says the qedr driver load failed with rc '0', instead of ENOMEM Fixes: ec72fce4 ("qedr: Add support for RoCE HW init") Signed-off-by: Michal Kalderon Signed-off-by: Ariel Elior Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/qedr/main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/qedr/main.c b/drivers/infiniband/hw/qedr/main.c index db4bf97c0e15..0ffb9b93e22d 100644 --- a/drivers/infiniband/hw/qedr/main.c +++ b/drivers/infiniband/hw/qedr/main.c @@ -833,7 +833,8 @@ static struct qedr_dev *qedr_add(struct qed_dev *cdev, struct pci_dev *pdev, dev->num_cnq = dev->ops->rdma_get_min_cnq_msix(cdev); if (!dev->num_cnq) { - DP_ERR(dev, "not enough CNQ resources.\n"); + DP_ERR(dev, "Failed. At least one CNQ is required.\n"); + rc = -ENOMEM; goto init_err; } -- cgit v1.2.3 From caf61b1b8b88ccf1451f7321a176393797e8d292 Mon Sep 17 00:00:00 2001 From: "Kalderon, Michal" Date: Wed, 21 Mar 2018 14:51:52 +0200 Subject: RDMA/qedr: Fix QP state initialization race Once the FW is transitioned to error, FLUSH cqes can be received. We want the driver to be aware of the fact that QP is already in error. Without this fix, a user may see false error messages in the dmesg log, mentioning that a FLUSH cqe was received while QP is not in error state. Fixes: cecbcddf ("qedr: Add support for QP verbs") Signed-off-by: Michal Kalderon Signed-off-by: Ariel Elior Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/qedr/verbs.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c index 716fae063122..419a158e8fca 100644 --- a/drivers/infiniband/hw/qedr/verbs.c +++ b/drivers/infiniband/hw/qedr/verbs.c @@ -1841,14 +1841,15 @@ static void qedr_reset_qp_hwq_info(struct qedr_qp_hwq_info *qph) static int qedr_update_qp_state(struct qedr_dev *dev, struct qedr_qp *qp, + enum qed_roce_qp_state cur_state, enum qed_roce_qp_state new_state) { int status = 0; - if (new_state == qp->state) + if (new_state == cur_state) return 0; - switch (qp->state) { + switch (cur_state) { case QED_ROCE_QP_STATE_RESET: switch (new_state) { case QED_ROCE_QP_STATE_INIT: @@ -1955,6 +1956,7 @@ int qedr_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, struct qedr_dev *dev = get_qedr_dev(&qp->dev->ibdev); const struct ib_global_route *grh = rdma_ah_read_grh(&attr->ah_attr); enum ib_qp_state old_qp_state, new_qp_state; + enum qed_roce_qp_state cur_state; int rc = 0; DP_DEBUG(dev, QEDR_MSG_QP, @@ -2175,13 +2177,25 @@ int qedr_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, qp->dest_qp_num = attr->dest_qp_num; } + cur_state = qp->state; + + /* Update the QP state before the actual ramrod to prevent a race with + * fast path. Modifying the QP state to error will cause the device to + * flush the CQEs and while polling the flushed CQEs will considered as + * a potential issue if the QP isn't in error state. + */ + if ((attr_mask & IB_QP_STATE) && qp->qp_type != IB_QPT_GSI && + !udata && qp_params.new_state == QED_ROCE_QP_STATE_ERR) + qp->state = QED_ROCE_QP_STATE_ERR; + if (qp->qp_type != IB_QPT_GSI) rc = dev->ops->rdma_modify_qp(dev->rdma_ctx, qp->qed_qp, &qp_params); if (attr_mask & IB_QP_STATE) { if ((qp->qp_type != IB_QPT_GSI) && (!udata)) - rc = qedr_update_qp_state(dev, qp, qp_params.new_state); + rc = qedr_update_qp_state(dev, qp, cur_state, + qp_params.new_state); qp->state = qp_params.new_state; } -- cgit v1.2.3 From 834814e80268c818f354c8f402e0c6604ed75589 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Wed, 21 Mar 2018 22:50:19 -0600 Subject: Revert: "vfio-pci: Mask INTx if a device is not capabable of enabling it" This reverts commit 2170dd04316e0754cbbfa4892a25aead39d225f7 The intent of commit 2170dd04316e ("vfio-pci: Mask INTx if a device is not capabable of enabling it") was to disallow the user from seeing that the device supports INTx if the platform is incapable of enabling it. The detection of this case however incorrectly includes devices which natively do not support INTx, such as SR-IOV VFs, and further discussions reveal gaps even for the target use case. Reported-by: Arjun Vynipadath Fixes: 2170dd04316e ("vfio-pci: Mask INTx if a device is not capabable of enabling it") Signed-off-by: Alex Williamson --- drivers/vfio/pci/vfio_pci.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c index b0f759476900..8a1508a8e481 100644 --- a/drivers/vfio/pci/vfio_pci.c +++ b/drivers/vfio/pci/vfio_pci.c @@ -207,9 +207,6 @@ static bool vfio_pci_nointx(struct pci_dev *pdev) } } - if (!pdev->irq) - return true; - return false; } -- cgit v1.2.3 From 3e4543bf20531d1cdb8672d25b3f2ff6d3d07627 Mon Sep 17 00:00:00 2001 From: Pierre-Yves MORDRET Date: Tue, 13 Mar 2018 17:55:35 +0100 Subject: dmaengine: stm32-dmamux: fix a potential buffer overflow The bitfield dma_inuse is allocated of size dma_requests bits, thus a valid bit address is from 0 to (dma_requests - 1). When find_first_zero_bit() fails, it returns dma_requests as invalid address. Using such address for the following set_bit() is incorrect and, if dma_requests is a multiple of BITS_PER_LONG, it will cause a buffer overflow. Currently this driver is only used in DT stm32h743.dtsi where a safe value dma_requests=16 is not triggering the buffer overflow. Fixed by checking the return value of find_first_zero_bit() _before_ using it. Signed-off-by: Antonio Borneo Signed-off-by: Pierre-Yves MORDRET Signed-off-by: Vinod Koul --- drivers/dma/stm32-dmamux.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/stm32-dmamux.c b/drivers/dma/stm32-dmamux.c index 4dbb30cf94ac..b922db90939a 100644 --- a/drivers/dma/stm32-dmamux.c +++ b/drivers/dma/stm32-dmamux.c @@ -118,14 +118,15 @@ static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec, spin_lock_irqsave(&dmamux->lock, flags); mux->chan_id = find_first_zero_bit(dmamux->dma_inuse, dmamux->dma_requests); - set_bit(mux->chan_id, dmamux->dma_inuse); - spin_unlock_irqrestore(&dmamux->lock, flags); if (mux->chan_id == dmamux->dma_requests) { + spin_unlock_irqrestore(&dmamux->lock, flags); dev_err(&pdev->dev, "Run out of free DMA requests\n"); ret = -ENOMEM; - goto error; + goto error_chan_id; } + set_bit(mux->chan_id, dmamux->dma_inuse); + spin_unlock_irqrestore(&dmamux->lock, flags); /* Look for DMA Master */ for (i = 1, min = 0, max = dmamux->dma_reqs[i]; @@ -173,6 +174,8 @@ static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec, error: clear_bit(mux->chan_id, dmamux->dma_inuse); + +error_chan_id: kfree(mux); return ERR_PTR(ret); } -- cgit v1.2.3 From 9a02d3af9ce9fcca751da1d4b5663b7a825d5957 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Tue, 20 Mar 2018 10:11:44 +0100 Subject: drm/tegra: dc: Use correct format array for Tegra124 Use tegra124_(primary|overlay)_formats for Tegra124, otherwise the count specified in the Tegra124 SoC info structure will be different from the array size and cause a crash. Fixes: 511c7023cf23 ("drm/tegra: dc: Support more formats") Signed-off-by: Stefan Agner Acked-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/dc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c index fbffe1948b3b..c1a5ae8faaef 100644 --- a/drivers/gpu/drm/tegra/dc.c +++ b/drivers/gpu/drm/tegra/dc.c @@ -2009,9 +2009,9 @@ static const struct tegra_dc_soc_info tegra124_dc_soc_info = { .coupled_pm = false, .has_nvdisplay = false, .num_primary_formats = ARRAY_SIZE(tegra124_primary_formats), - .primary_formats = tegra114_primary_formats, + .primary_formats = tegra124_primary_formats, .num_overlay_formats = ARRAY_SIZE(tegra124_overlay_formats), - .overlay_formats = tegra114_overlay_formats, + .overlay_formats = tegra124_overlay_formats, }; static const struct tegra_dc_soc_info tegra210_dc_soc_info = { -- cgit v1.2.3 From 22b99058dd79ecff9de64eb30e15a330d89862c6 Mon Sep 17 00:00:00 2001 From: Petr Machata Date: Thu, 22 Mar 2018 19:53:34 +0200 Subject: mlxsw: spectrum_router: Move mlxsw_sp_rif_ipip_lb_op() Move the function so that it can be called without forward declaration from a function that will be added in a follow-up patch. Fixes: 0063587d3587 ("mlxsw: spectrum: Support decap-only IP-in-IP tunnels") Signed-off-by: Petr Machata Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlxsw/spectrum_router.c | 54 +++++++++++----------- 1 file changed, 27 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index f7948e983637..a7d0adf068ec 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -1380,6 +1380,33 @@ mlxsw_sp_ipip_entry_ol_up_event(struct mlxsw_sp *mlxsw_sp, decap_fib_entry); } +static int +mlxsw_sp_rif_ipip_lb_op(struct mlxsw_sp_rif_ipip_lb *lb_rif, + struct mlxsw_sp_vr *ul_vr, bool enable) +{ + struct mlxsw_sp_rif_ipip_lb_config lb_cf = lb_rif->lb_config; + struct mlxsw_sp_rif *rif = &lb_rif->common; + struct mlxsw_sp *mlxsw_sp = rif->mlxsw_sp; + char ritr_pl[MLXSW_REG_RITR_LEN]; + u32 saddr4; + + switch (lb_cf.ul_protocol) { + case MLXSW_SP_L3_PROTO_IPV4: + saddr4 = be32_to_cpu(lb_cf.saddr.addr4); + mlxsw_reg_ritr_pack(ritr_pl, enable, MLXSW_REG_RITR_LOOPBACK_IF, + rif->rif_index, rif->vr_id, rif->dev->mtu); + mlxsw_reg_ritr_loopback_ipip4_pack(ritr_pl, lb_cf.lb_ipipt, + MLXSW_REG_RITR_LOOPBACK_IPIP_OPTIONS_GRE_KEY_PRESET, + ul_vr->id, saddr4, lb_cf.okey); + break; + + case MLXSW_SP_L3_PROTO_IPV6: + return -EAFNOSUPPORT; + } + + return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ritr), ritr_pl); +} + static void mlxsw_sp_netdevice_ipip_ol_up_event(struct mlxsw_sp *mlxsw_sp, struct net_device *ol_dev) { @@ -6843,33 +6870,6 @@ mlxsw_sp_rif_ipip_lb_setup(struct mlxsw_sp_rif *rif, rif_lb->lb_config = params_lb->lb_config; } -static int -mlxsw_sp_rif_ipip_lb_op(struct mlxsw_sp_rif_ipip_lb *lb_rif, - struct mlxsw_sp_vr *ul_vr, bool enable) -{ - struct mlxsw_sp_rif_ipip_lb_config lb_cf = lb_rif->lb_config; - struct mlxsw_sp_rif *rif = &lb_rif->common; - struct mlxsw_sp *mlxsw_sp = rif->mlxsw_sp; - char ritr_pl[MLXSW_REG_RITR_LEN]; - u32 saddr4; - - switch (lb_cf.ul_protocol) { - case MLXSW_SP_L3_PROTO_IPV4: - saddr4 = be32_to_cpu(lb_cf.saddr.addr4); - mlxsw_reg_ritr_pack(ritr_pl, enable, MLXSW_REG_RITR_LOOPBACK_IF, - rif->rif_index, rif->vr_id, rif->dev->mtu); - mlxsw_reg_ritr_loopback_ipip4_pack(ritr_pl, lb_cf.lb_ipipt, - MLXSW_REG_RITR_LOOPBACK_IPIP_OPTIONS_GRE_KEY_PRESET, - ul_vr->id, saddr4, lb_cf.okey); - break; - - case MLXSW_SP_L3_PROTO_IPV6: - return -EAFNOSUPPORT; - } - - return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ritr), ritr_pl); -} - static int mlxsw_sp_rif_ipip_lb_configure(struct mlxsw_sp_rif *rif) { -- cgit v1.2.3 From 68c3cd925597842c4744fd93d61f8cd2496cdfc8 Mon Sep 17 00:00:00 2001 From: Petr Machata Date: Thu, 22 Mar 2018 19:53:35 +0200 Subject: mlxsw: spectrum_router: Handle MTU change of GRE netdevs Update MTU of overlay loopback in accordance with the setting on the tunnel netdevice. Fixes: 0063587d3587 ("mlxsw: spectrum: Support decap-only IP-in-IP tunnels") Signed-off-by: Petr Machata Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlxsw/spectrum_router.c | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index a7d0adf068ec..997e24dcb053 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -1407,6 +1407,28 @@ mlxsw_sp_rif_ipip_lb_op(struct mlxsw_sp_rif_ipip_lb *lb_rif, return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ritr), ritr_pl); } +static int mlxsw_sp_netdevice_ipip_ol_update_mtu(struct mlxsw_sp *mlxsw_sp, + struct net_device *ol_dev) +{ + struct mlxsw_sp_ipip_entry *ipip_entry; + struct mlxsw_sp_rif_ipip_lb *lb_rif; + struct mlxsw_sp_vr *ul_vr; + int err = 0; + + ipip_entry = mlxsw_sp_ipip_entry_find_by_ol_dev(mlxsw_sp, ol_dev); + if (ipip_entry) { + lb_rif = ipip_entry->ol_lb; + ul_vr = &mlxsw_sp->router->vrs[lb_rif->ul_vr_id]; + err = mlxsw_sp_rif_ipip_lb_op(lb_rif, ul_vr, true); + if (err) + goto out; + lb_rif->common.mtu = ol_dev->mtu; + } + +out: + return err; +} + static void mlxsw_sp_netdevice_ipip_ol_up_event(struct mlxsw_sp *mlxsw_sp, struct net_device *ol_dev) { @@ -1687,6 +1709,8 @@ int mlxsw_sp_netdevice_ipip_ol_event(struct mlxsw_sp *mlxsw_sp, extack = info->extack; return mlxsw_sp_netdevice_ipip_ol_change_event(mlxsw_sp, ol_dev, extack); + case NETDEV_CHANGEMTU: + return mlxsw_sp_netdevice_ipip_ol_update_mtu(mlxsw_sp, ol_dev); } return 0; } -- cgit v1.2.3 From c70a36268799cf2f902b5a31e452571fcb96bfe9 Mon Sep 17 00:00:00 2001 From: Felix Kuehling Date: Fri, 23 Mar 2018 15:30:33 -0400 Subject: drm/amdkfd: Fix scratch memory with HWS enabled Program sh_hidden_private_base_vmid correctly in the map-process PM4 packet. Signed-off-by: Felix Kuehling Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c index 0ecbd1f9b606..0c3bc00978f7 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_packet_manager.c @@ -188,8 +188,7 @@ static int pm_create_map_process(struct packet_manager *pm, uint32_t *buffer, packet->sh_mem_ape1_base = qpd->sh_mem_ape1_base; packet->sh_mem_ape1_limit = qpd->sh_mem_ape1_limit; - /* TODO: scratch support */ - packet->sh_hidden_private_base_vmid = 0; + packet->sh_hidden_private_base_vmid = qpd->sh_hidden_private_base; packet->gds_addr_lo = lower_32_bits(qpd->gds_context_area); packet->gds_addr_hi = upper_32_bits(qpd->gds_context_area); -- cgit v1.2.3 From 72a01d231dcb22a276209c7a924a8cd475fbaa9b Mon Sep 17 00:00:00 2001 From: Felix Kuehling Date: Fri, 23 Mar 2018 15:30:34 -0400 Subject: drm/amdkfd: Deallocate SDMA queues correctly Deallocate SDMA queues during abnormal process termination and when queue creation fails after the SDMA allocation. Signed-off-by: Felix Kuehling Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- .../gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c index b21285afa4ea..1bd5f26b3f00 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c @@ -821,13 +821,13 @@ static int create_queue_cpsch(struct device_queue_manager *dqm, struct queue *q, pr_warn("Can't create new usermode queue because %d queues were already created\n", dqm->total_queue_count); retval = -EPERM; - goto out; + goto out_unlock; } if (q->properties.type == KFD_QUEUE_TYPE_SDMA) { retval = allocate_sdma_queue(dqm, &q->sdma_id); if (retval) - goto out; + goto out_unlock; q->properties.sdma_queue_id = q->sdma_id / CIK_SDMA_QUEUES_PER_ENGINE; q->properties.sdma_engine_id = @@ -838,7 +838,7 @@ static int create_queue_cpsch(struct device_queue_manager *dqm, struct queue *q, if (!mqd) { retval = -ENOMEM; - goto out; + goto out_deallocate_sdma_queue; } dqm->asic_ops.init_sdma_vm(dqm, q, qpd); @@ -848,7 +848,7 @@ static int create_queue_cpsch(struct device_queue_manager *dqm, struct queue *q, retval = mqd->init_mqd(mqd, &q->mqd, &q->mqd_mem_obj, &q->gart_mqd_addr, &q->properties); if (retval) - goto out; + goto out_deallocate_sdma_queue; list_add(&q->list, &qpd->queues_list); qpd->queue_count++; @@ -869,7 +869,13 @@ static int create_queue_cpsch(struct device_queue_manager *dqm, struct queue *q, pr_debug("Total of %d queues are accountable so far\n", dqm->total_queue_count); -out: + mutex_unlock(&dqm->lock); + return retval; + +out_deallocate_sdma_queue: + if (q->properties.type == KFD_QUEUE_TYPE_SDMA) + deallocate_sdma_queue(dqm, q->sdma_id); +out_unlock: mutex_unlock(&dqm->lock); return retval; } @@ -1188,8 +1194,10 @@ static int process_termination_cpsch(struct device_queue_manager *dqm, /* Clear all user mode queues */ list_for_each_entry(q, &qpd->queues_list, list) { - if (q->properties.type == KFD_QUEUE_TYPE_SDMA) + if (q->properties.type == KFD_QUEUE_TYPE_SDMA) { dqm->sdma_queue_count--; + deallocate_sdma_queue(dqm, q->sdma_id); + } if (q->properties.is_active) dqm->queue_count--; -- cgit v1.2.3 From 771b7bf05339081019d22452ebcab6929372e13e Mon Sep 17 00:00:00 2001 From: Pierre-Yves MORDRET Date: Wed, 21 Mar 2018 17:48:40 +0100 Subject: i2c: i2c-stm32f7: fix no check on returned setup Before assigning returned setup structure check if not null Fixes: 463a9215f3ca7600b5ff ("i2c: stm32f7: fix setup structure") Signed-off-by: Pierre-Yves MORDRET Acked-by: Alexandre TORGUE Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-stm32f7.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c index b445b3bb0bb1..f273e28c39db 100644 --- a/drivers/i2c/busses/i2c-stm32f7.c +++ b/drivers/i2c/busses/i2c-stm32f7.c @@ -888,6 +888,11 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) } setup = of_device_get_match_data(&pdev->dev); + if (!setup) { + dev_err(&pdev->dev, "Can't get device data\n"); + ret = -ENODEV; + goto clk_free; + } i2c_dev->setup = *setup; ret = device_property_read_u32(i2c_dev->dev, "i2c-scl-rising-time-ns", -- cgit v1.2.3 From e8a4796ee2954db9f7e9b52e5fbc66ef876752f6 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Fri, 23 Mar 2018 20:00:13 -0700 Subject: nfp: bpf: fix check of program max insn count NFP program allocation length is in bytes and NFP program length is in instructions, fix the comparison of the two. Fixes: 9314c442d7dd ("nfp: bpf: move translation prepare to offload.c") Signed-off-by: Jakub Kicinski Reviewed-by: Jiong Wang Signed-off-by: Alexei Starovoitov --- drivers/net/ethernet/netronome/nfp/bpf/jit.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/netronome/nfp/bpf/jit.c b/drivers/net/ethernet/netronome/nfp/bpf/jit.c index 56451edf01c2..ecd7c33baf3c 100644 --- a/drivers/net/ethernet/netronome/nfp/bpf/jit.c +++ b/drivers/net/ethernet/netronome/nfp/bpf/jit.c @@ -74,7 +74,9 @@ nfp_meta_has_prev(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta) static void nfp_prog_push(struct nfp_prog *nfp_prog, u64 insn) { - if (nfp_prog->__prog_alloc_len == nfp_prog->prog_len) { + if (nfp_prog->__prog_alloc_len / sizeof(u64) == nfp_prog->prog_len) { + pr_warn("instruction limit reached (%u NFP instructions)\n", + nfp_prog->prog_len); nfp_prog->error = -ENOSPC; return; } @@ -2463,6 +2465,8 @@ static int nfp_translate(struct nfp_prog *nfp_prog) err = cb(nfp_prog, meta); if (err) return err; + if (nfp_prog->error) + return nfp_prog->error; nfp_prog->n_translated++; } -- cgit v1.2.3 From f1869a890cdedb92a3fab969db5d0fd982850273 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 24 Mar 2018 10:43:26 +0100 Subject: tty: vt: fix up tabstops properly Tabs on a console with long lines do not wrap properly, so correctly account for the line length when computing the tab placement location. Reported-by: James Holderness Signed-off-by: Greg Kroah-Hartman Cc: stable Signed-off-by: Linus Torvalds --- drivers/tty/vt/vt.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 88b902c525d7..b4e57c5a8bba 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -1727,7 +1727,7 @@ static void reset_terminal(struct vc_data *vc, int do_clear) default_attr(vc); update_attr(vc); - vc->vc_tab_stop[0] = 0x01010100; + vc->vc_tab_stop[0] = vc->vc_tab_stop[1] = vc->vc_tab_stop[2] = vc->vc_tab_stop[3] = @@ -1771,7 +1771,7 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) vc->vc_pos -= (vc->vc_x << 1); while (vc->vc_x < vc->vc_cols - 1) { vc->vc_x++; - if (vc->vc_tab_stop[vc->vc_x >> 5] & (1 << (vc->vc_x & 31))) + if (vc->vc_tab_stop[7 & (vc->vc_x >> 5)] & (1 << (vc->vc_x & 31))) break; } vc->vc_pos += (vc->vc_x << 1); @@ -1831,7 +1831,7 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) lf(vc); return; case 'H': - vc->vc_tab_stop[vc->vc_x >> 5] |= (1 << (vc->vc_x & 31)); + vc->vc_tab_stop[7 & (vc->vc_x >> 5)] |= (1 << (vc->vc_x & 31)); return; case 'Z': respond_ID(tty); @@ -2024,7 +2024,7 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) return; case 'g': if (!vc->vc_par[0]) - vc->vc_tab_stop[vc->vc_x >> 5] &= ~(1 << (vc->vc_x & 31)); + vc->vc_tab_stop[7 & (vc->vc_x >> 5)] &= ~(1 << (vc->vc_x & 31)); else if (vc->vc_par[0] == 3) { vc->vc_tab_stop[0] = vc->vc_tab_stop[1] = -- cgit v1.2.3 From e69647a19c870c2f919e4d5023af8a515e8ef25f Mon Sep 17 00:00:00 2001 From: Raghuram Chary J Date: Fri, 23 Mar 2018 15:48:08 +0530 Subject: lan78xx: Set ASD in MAC_CR when EEE is enabled. Description: EEE does not work with lan7800 when AutoSpeed is not set. (This can happen when EEPROM is not populated or configured incorrectly) Root-Cause: When EEE is enabled, the mac config register ASD is not set i.e. in default state, causing EEE fail. Fix: Set the register when eeprom is not present. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Raghuram Chary J Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 60a604cc7647..90d176279152 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -2351,6 +2351,7 @@ static int lan78xx_reset(struct lan78xx_net *dev) u32 buf; int ret = 0; unsigned long timeout; + u8 sig; ret = lan78xx_read_reg(dev, HW_CFG, &buf); buf |= HW_CFG_LRST_; @@ -2450,6 +2451,15 @@ static int lan78xx_reset(struct lan78xx_net *dev) /* LAN7801 only has RGMII mode */ if (dev->chipid == ID_REV_CHIP_ID_7801_) buf &= ~MAC_CR_GMII_EN_; + + if (dev->chipid == ID_REV_CHIP_ID_7800_) { + ret = lan78xx_read_raw_eeprom(dev, 0, 1, &sig); + if (!ret && sig != EEPROM_INDICATOR) { + /* Implies there is no external eeprom. Set mac speed */ + netdev_info(dev->net, "No External EEPROM. Setting MAC Speed\n"); + buf |= MAC_CR_AUTO_DUPLEX_ | MAC_CR_AUTO_SPEED_; + } + } ret = lan78xx_write_reg(dev, MAC_CR, buf); ret = lan78xx_read_reg(dev, MAC_TX, &buf); -- cgit v1.2.3 From 743989254ea9f132517806d8893ca9b6cf9dc86b Mon Sep 17 00:00:00 2001 From: Pawel Dembicki Date: Sat, 24 Mar 2018 22:08:14 +0100 Subject: net: qmi_wwan: add BroadMobi BM806U 2020:2033 BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem. Tested hardware BM806U is mounted on D-Link DWR-921-C3 router. The USB id is added to qmi_wwan.c to allow QMI communication with the BM806U. Tested on 4.14 kernel and OpenWRT. Signed-off-by: Pawel Dembicki Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 76ac48095c29..7ced28859261 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1180,6 +1180,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */ {QMI_FIXED_INTF(0x2001, 0x7e19, 4)}, /* D-Link DWM-221 B1 */ {QMI_FIXED_INTF(0x2001, 0x7e35, 4)}, /* D-Link DWM-222 */ + {QMI_FIXED_INTF(0x2020, 0x2033, 4)}, /* BroadMobi BM806U */ {QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)}, /* Sierra Wireless MC7700 */ {QMI_FIXED_INTF(0x114f, 0x68a2, 8)}, /* Sierra Wireless MC7750 */ {QMI_FIXED_INTF(0x1199, 0x68a2, 8)}, /* Sierra Wireless MC7710 in QMI mode */ -- cgit v1.2.3 From 5c78f6bfae2b10ff70e21d343e64584ea6280c26 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Mon, 26 Mar 2018 01:16:45 +0800 Subject: bonding: fix the err path for dev hwaddr sync in bond_enslave vlan_vids_add_by_dev is called right after dev hwaddr sync, so on the err path it should unsync dev hwaddr. Otherwise, the slave dev's hwaddr will never be unsync when this err happens. Fixes: 1ff412ad7714 ("bonding: change the bond's vlan syncing functions with the standard ones") Signed-off-by: Xin Long Reviewed-by: Nikolay Aleksandrov Acked-by: Andy Gospodarek Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index c669554d70bb..0c299de4f2ef 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1565,7 +1565,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, if (res) { netdev_err(bond_dev, "Couldn't add bond vlan ids to %s\n", slave_dev->name); - goto err_close; + goto err_hwaddr_unsync; } prev_slave = bond_last_slave(bond); @@ -1755,9 +1755,6 @@ err_unregister: netdev_rx_handler_unregister(slave_dev); err_detach: - if (!bond_uses_primary(bond)) - bond_hw_addr_flush(bond_dev, slave_dev); - vlan_vids_del_by_dev(slave_dev, bond_dev); if (rcu_access_pointer(bond->primary_slave) == new_slave) RCU_INIT_POINTER(bond->primary_slave, NULL); @@ -1771,6 +1768,10 @@ err_detach: synchronize_rcu(); slave_disable_netpoll(new_slave); +err_hwaddr_unsync: + if (!bond_uses_primary(bond)) + bond_hw_addr_flush(bond_dev, slave_dev); + err_close: slave_dev->priv_flags &= ~IFF_BONDING; dev_close(slave_dev); -- cgit v1.2.3 From ae42cc62a9f07f1f6979054ed92606b9c30f4a2e Mon Sep 17 00:00:00 2001 From: Xin Long Date: Mon, 26 Mar 2018 01:16:46 +0800 Subject: bonding: move dev_mc_sync after master_upper_dev_link in bond_enslave Beniamino found a crash when adding vlan as slave of bond which is also the parent link: ip link add bond1 type bond ip link set bond1 up ip link add link bond1 vlan1 type vlan id 80 ip link set vlan1 master bond1 The call trace is as below: [] queued_spin_lock_slowpath+0xb/0xf [] _raw_spin_lock+0x20/0x30 [] dev_mc_sync+0x37/0x80 [] vlan_dev_set_rx_mode+0x1c/0x30 [8021q] [] __dev_set_rx_mode+0x5a/0xa0 [] dev_mc_sync_multiple+0x78/0x80 [] bond_enslave+0x67c/0x1190 [bonding] [] do_setlink+0x9c9/0xe50 [] rtnl_newlink+0x522/0x880 [] rtnetlink_rcv_msg+0xa7/0x260 [] netlink_rcv_skb+0xab/0xc0 [] rtnetlink_rcv+0x28/0x30 [] netlink_unicast+0x170/0x210 [] netlink_sendmsg+0x308/0x420 [] sock_sendmsg+0xb6/0xf0 This is actually a dead lock caused by sync slave hwaddr from master when the master is the slave's 'slave'. This dead loop check is actually done by netdev_master_upper_dev_link. However, Commit 1f718f0f4f97 ("bonding: populate neighbour's private on enslave") moved it after dev_mc_sync. This patch is to fix it by moving dev_mc_sync after master_upper_dev_link, so that this loop check would be earlier than dev_mc_sync. It also moves if (mode == BOND_MODE_8023AD) into if (!bond_uses_primary) clause as an improvement. Note team driver also has this issue, I will fix it in another patch. Fixes: 1f718f0f4f97 ("bonding: populate neighbour's private on enslave") Reported-by: Beniamino Galvani Signed-off-by: Xin Long Acked-by: Andy Gospodarek Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 73 ++++++++++++++++++++--------------------- 1 file changed, 35 insertions(+), 38 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 0c299de4f2ef..55e198554ec0 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1528,44 +1528,11 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, goto err_close; } - /* If the mode uses primary, then the following is handled by - * bond_change_active_slave(). - */ - if (!bond_uses_primary(bond)) { - /* set promiscuity level to new slave */ - if (bond_dev->flags & IFF_PROMISC) { - res = dev_set_promiscuity(slave_dev, 1); - if (res) - goto err_close; - } - - /* set allmulti level to new slave */ - if (bond_dev->flags & IFF_ALLMULTI) { - res = dev_set_allmulti(slave_dev, 1); - if (res) - goto err_close; - } - - netif_addr_lock_bh(bond_dev); - - dev_mc_sync_multiple(slave_dev, bond_dev); - dev_uc_sync_multiple(slave_dev, bond_dev); - - netif_addr_unlock_bh(bond_dev); - } - - if (BOND_MODE(bond) == BOND_MODE_8023AD) { - /* add lacpdu mc addr to mc list */ - u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR; - - dev_mc_add(slave_dev, lacpdu_multicast); - } - res = vlan_vids_add_by_dev(slave_dev, bond_dev); if (res) { netdev_err(bond_dev, "Couldn't add bond vlan ids to %s\n", slave_dev->name); - goto err_hwaddr_unsync; + goto err_close; } prev_slave = bond_last_slave(bond); @@ -1725,6 +1692,37 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, goto err_upper_unlink; } + /* If the mode uses primary, then the following is handled by + * bond_change_active_slave(). + */ + if (!bond_uses_primary(bond)) { + /* set promiscuity level to new slave */ + if (bond_dev->flags & IFF_PROMISC) { + res = dev_set_promiscuity(slave_dev, 1); + if (res) + goto err_sysfs_del; + } + + /* set allmulti level to new slave */ + if (bond_dev->flags & IFF_ALLMULTI) { + res = dev_set_allmulti(slave_dev, 1); + if (res) + goto err_sysfs_del; + } + + netif_addr_lock_bh(bond_dev); + dev_mc_sync_multiple(slave_dev, bond_dev); + dev_uc_sync_multiple(slave_dev, bond_dev); + netif_addr_unlock_bh(bond_dev); + + if (BOND_MODE(bond) == BOND_MODE_8023AD) { + /* add lacpdu mc addr to mc list */ + u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR; + + dev_mc_add(slave_dev, lacpdu_multicast); + } + } + bond->slave_cnt++; bond_compute_features(bond); bond_set_carrier(bond); @@ -1748,6 +1746,9 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, return 0; /* Undo stages on error */ +err_sysfs_del: + bond_sysfs_slave_del(new_slave); + err_upper_unlink: bond_upper_dev_unlink(bond, new_slave); @@ -1768,10 +1769,6 @@ err_detach: synchronize_rcu(); slave_disable_netpoll(new_slave); -err_hwaddr_unsync: - if (!bond_uses_primary(bond)) - bond_hw_addr_flush(bond_dev, slave_dev); - err_close: slave_dev->priv_flags &= ~IFF_BONDING; dev_close(slave_dev); -- cgit v1.2.3 From 9f5a90c107741b864398f4ac0014711a8c1d8474 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Mon, 26 Mar 2018 01:16:47 +0800 Subject: bonding: process the err returned by dev_set_allmulti properly in bond_enslave When dev_set_promiscuity(1) succeeds but dev_set_allmulti(1) fails, dev_set_promiscuity(-1) should be done before going to the err path. Otherwise, dev->promiscuity will leak. Fixes: 7e1a1ac1fbaa ("bonding: Check return of dev_set_promiscuity/allmulti") Signed-off-by: Xin Long Acked-by: Andy Gospodarek Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 55e198554ec0..b7b113018853 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1706,8 +1706,11 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, /* set allmulti level to new slave */ if (bond_dev->flags & IFF_ALLMULTI) { res = dev_set_allmulti(slave_dev, 1); - if (res) + if (res) { + if (bond_dev->flags & IFF_PROMISC) + dev_set_promiscuity(slave_dev, -1); goto err_sysfs_del; + } } netif_addr_lock_bh(bond_dev); -- cgit v1.2.3 From 982cf3b3999d39a2eaca0a65542df33c19b5d814 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Mon, 26 Mar 2018 01:25:06 +0800 Subject: team: move dev_mc_sync after master_upper_dev_link in team_port_add The same fix as in 'bonding: move dev_mc_sync after master_upper_dev_link in bond_enslave' is needed for team driver. The panic can be reproduced easily: ip link add team1 type team ip link set team1 up ip link add link team1 vlan1 type vlan id 80 ip link set vlan1 master team1 Fixes: cb41c997d444 ("team: team should sync the port's uc/mc addrs when add a port") Signed-off-by: Xin Long Acked-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/team/team.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 56c701b73c12..befed2d22bf4 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1197,11 +1197,6 @@ static int team_port_add(struct team *team, struct net_device *port_dev) goto err_dev_open; } - netif_addr_lock_bh(dev); - dev_uc_sync_multiple(port_dev, dev); - dev_mc_sync_multiple(port_dev, dev); - netif_addr_unlock_bh(dev); - err = vlan_vids_add_by_dev(port_dev, dev); if (err) { netdev_err(dev, "Failed to add vlan ids to device %s\n", @@ -1241,6 +1236,11 @@ static int team_port_add(struct team *team, struct net_device *port_dev) goto err_option_port_add; } + netif_addr_lock_bh(dev); + dev_uc_sync_multiple(port_dev, dev); + dev_mc_sync_multiple(port_dev, dev); + netif_addr_unlock_bh(dev); + port->index = -1; list_add_tail_rcu(&port->list, &team->port_list); team_port_enable(team, port); @@ -1265,8 +1265,6 @@ err_enable_netpoll: vlan_vids_del_by_dev(port_dev, dev); err_vids_add: - dev_uc_unsync(port_dev, dev); - dev_mc_unsync(port_dev, dev); dev_close(port_dev); err_dev_open: -- cgit v1.2.3 From f3d801baf118c9d452ee7c278df16880c892e669 Mon Sep 17 00:00:00 2001 From: Torsten Hilbrich Date: Mon, 26 Mar 2018 07:19:57 +0200 Subject: net/usb/qmi_wwan.c: Add USB id for lt4120 modem This is needed to support the modem found in HP EliteBook 820 G3. Signed-off-by: Torsten Hilbrich Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 7ced28859261..2508ab08fc5a 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1241,6 +1241,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x413c, 0x81b6, 8)}, /* Dell Wireless 5811e */ {QMI_FIXED_INTF(0x413c, 0x81b6, 10)}, /* Dell Wireless 5811e */ {QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)}, /* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */ + {QMI_FIXED_INTF(0x03f0, 0x9d1d, 1)}, /* HP lt4120 Snapdragon X5 LTE */ {QMI_FIXED_INTF(0x22de, 0x9061, 3)}, /* WeTelecom WPD-600N */ {QMI_FIXED_INTF(0x1e0e, 0x9001, 5)}, /* SIMCom 7230E */ {QMI_QUIRK_SET_DTR(0x2c7c, 0x0125, 4)}, /* Quectel EC25, EC20 R2.0 Mini PCIe */ -- cgit v1.2.3 From aaa3149bbee9ba9b4e6f0bd6e3e7d191edeae942 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Mon, 26 Mar 2018 16:10:23 +0800 Subject: vhost_net: add missing lock nesting notation We try to hold TX virtqueue mutex in vhost_net_rx_peek_head_len() after RX virtqueue mutex is held in handle_rx(). This requires an appropriate lock nesting notation to calm down deadlock detector. Fixes: 0308813724606 ("vhost_net: basic polling support") Reported-by: syzbot+7f073540b1384a614e09@syzkaller.appspotmail.com Signed-off-by: Jason Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/vhost/net.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index 8139bc70ad7d..12bcfbac2cc9 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -630,7 +630,7 @@ static int vhost_net_rx_peek_head_len(struct vhost_net *net, struct sock *sk) if (!len && vq->busyloop_timeout) { /* Both tx vq and rx socket were polled here */ - mutex_lock(&vq->mutex); + mutex_lock_nested(&vq->mutex, 1); vhost_disable_notify(&net->dev, vq); preempt_disable(); @@ -763,7 +763,7 @@ static void handle_rx(struct vhost_net *net) struct iov_iter fixup; __virtio16 num_buffers; - mutex_lock(&vq->mutex); + mutex_lock_nested(&vq->mutex, 0); sock = vq->private_data; if (!sock) goto out; -- cgit v1.2.3 From 1c82c9e1f2ba9f32ac41012b91abddd639010f7a Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Mon, 26 Mar 2018 18:07:09 +0800 Subject: net: dsa: mt7530: remove redundant MODULE_ALIAS entries MODULE_ALIAS exports information to allow the module to be auto-loaded at boot for the drivers registered using legacy platform registration. However, currently the driver is always used by DT-only platform, MODULE_ALIAS is redundant and should be removed properly. Signed-off-by: Sean Wang Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mt7530.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 8a0bb000d056..d31246cbefd1 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -1424,4 +1424,3 @@ mdio_module_driver(mt7530_mdio_driver); MODULE_AUTHOR("Sean Wang "); MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:mediatek-mt7530"); -- cgit v1.2.3 From 3c82b372a9f44aa224b8d5106ff6f1ad516fa8a8 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Mon, 26 Mar 2018 18:07:10 +0800 Subject: net: dsa: mt7530: fix module autoloading for OF platform drivers It's required to create a modules.alias via MODULE_DEVICE_TABLE helper for the OF platform driver. Otherwise, module autoloading cannot work. Signed-off-by: Sean Wang Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mt7530.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index d31246cbefd1..4e53c5ce23ff 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -1409,6 +1409,7 @@ static const struct of_device_id mt7530_of_match[] = { { .compatible = "mediatek,mt7530" }, { /* sentinel */ }, }; +MODULE_DEVICE_TABLE(of, mt7530_of_match); static struct mdio_driver mt7530_mdio_driver = { .probe = mt7530_probe, -- cgit v1.2.3 From 84c9c8f2ac3c22924d30643894fcf7597c633d3e Mon Sep 17 00:00:00 2001 From: Jianbo Liu Date: Fri, 2 Mar 2018 02:09:08 +0000 Subject: net/mlx5e: Don't override vport admin link state in switchdev mode The vport admin original link state will be re-applied after returning back to legacy mode, it is not right to change the admin link state value when in switchdev mode. Use direct vport commands to alter logical vport state in netdev representor open/close flows rather than the administrative eswitch API. Fixes: 20a1ea674783 ('net/mlx5e: Support VF vport link state control for SRIOV switchdev mode') Signed-off-by: Jianbo Liu Reviewed-by: Roi Dayan Reviewed-by: Or Gerlitz Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 363d8dcb7f17..0273c233bc85 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -668,7 +668,6 @@ static int mlx5e_rep_open(struct net_device *dev) struct mlx5e_priv *priv = netdev_priv(dev); struct mlx5e_rep_priv *rpriv = priv->ppriv; struct mlx5_eswitch_rep *rep = rpriv->rep; - struct mlx5_eswitch *esw = priv->mdev->priv.eswitch; int err; mutex_lock(&priv->state_lock); @@ -676,8 +675,9 @@ static int mlx5e_rep_open(struct net_device *dev) if (err) goto unlock; - if (!mlx5_eswitch_set_vport_state(esw, rep->vport, - MLX5_ESW_VPORT_ADMIN_STATE_UP)) + if (!mlx5_modify_vport_admin_state(priv->mdev, + MLX5_QUERY_VPORT_STATE_IN_OP_MOD_ESW_VPORT, + rep->vport, MLX5_ESW_VPORT_ADMIN_STATE_UP)) netif_carrier_on(dev); unlock: @@ -690,11 +690,12 @@ static int mlx5e_rep_close(struct net_device *dev) struct mlx5e_priv *priv = netdev_priv(dev); struct mlx5e_rep_priv *rpriv = priv->ppriv; struct mlx5_eswitch_rep *rep = rpriv->rep; - struct mlx5_eswitch *esw = priv->mdev->priv.eswitch; int ret; mutex_lock(&priv->state_lock); - (void)mlx5_eswitch_set_vport_state(esw, rep->vport, MLX5_ESW_VPORT_ADMIN_STATE_DOWN); + mlx5_modify_vport_admin_state(priv->mdev, + MLX5_QUERY_VPORT_STATE_IN_OP_MOD_ESW_VPORT, + rep->vport, MLX5_ESW_VPORT_ADMIN_STATE_DOWN); ret = mlx5e_close_locked(dev); mutex_unlock(&priv->state_lock); return ret; -- cgit v1.2.3 From 5ecadff0b6cfb52ba5d1bd07c6372acea5418c39 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 13 Feb 2018 13:43:39 +0200 Subject: net/mlx5e: Use 32 bits to store VF representor SQ number SQs are 32 and not 16 bits, hence it's wrong to use only 16 bits to store the sq number for which are going to set steering rule, fix that. Fixes: cb67b832921c ('net/mlx5e: Introduce SRIOV VF representors') Signed-off-by: Or Gerlitz Reviewed-by: Mark Bloch Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 0273c233bc85..738554a6c69f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -209,7 +209,7 @@ static void mlx5e_sqs2vport_stop(struct mlx5_eswitch *esw, static int mlx5e_sqs2vport_start(struct mlx5_eswitch *esw, struct mlx5_eswitch_rep *rep, - u16 *sqns_array, int sqns_num) + u32 *sqns_array, int sqns_num) { struct mlx5_flow_handle *flow_rule; struct mlx5e_rep_priv *rpriv; @@ -255,9 +255,9 @@ int mlx5e_add_sqs_fwd_rules(struct mlx5e_priv *priv) struct mlx5e_channel *c; int n, tc, num_sqs = 0; int err = -ENOMEM; - u16 *sqs; + u32 *sqs; - sqs = kcalloc(priv->channels.num * priv->channels.params.num_tc, sizeof(u16), GFP_KERNEL); + sqs = kcalloc(priv->channels.num * priv->channels.params.num_tc, sizeof(*sqs), GFP_KERNEL); if (!sqs) goto out; -- cgit v1.2.3 From f125376b06bcc57dfb0216ac8d6ec6d5dcf81025 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Thu, 15 Feb 2018 12:39:55 +0200 Subject: net/mlx5: Make eswitch support to depend on switchdev Add dependancy for switchdev to be congfigured as any user-space control plane SW is expected to use the HW switchdev ID to locate the representors related to VFs of a certain PF and apply SW/offloaded switching on them. Fixes: e80541ecabd5 ('net/mlx5: Add CONFIG_MLX5_ESWITCH Kconfig') Signed-off-by: Or Gerlitz Reviewed-by: Mark Bloch Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/Kconfig | 2 +- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 4 ++-- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 2 -- 3 files changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig index 25deaa5a534c..c032319f1cb9 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig +++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig @@ -46,7 +46,7 @@ config MLX5_MPFS config MLX5_ESWITCH bool "Mellanox Technologies MLX5 SRIOV E-Switch support" - depends on MLX5_CORE_EN + depends on MLX5_CORE_EN && NET_SWITCHDEV default y ---help--- Mellanox Technologies Ethernet SRIOV E-Switch support in ConnectX NIC. diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index da94c8cba5ee..e35859657217 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -4069,7 +4069,7 @@ static void mlx5e_set_netdev_dev_addr(struct net_device *netdev) } } -#if IS_ENABLED(CONFIG_NET_SWITCHDEV) && IS_ENABLED(CONFIG_MLX5_ESWITCH) +#if IS_ENABLED(CONFIG_MLX5_ESWITCH) static const struct switchdev_ops mlx5e_switchdev_ops = { .switchdev_port_attr_get = mlx5e_attr_get, }; @@ -4175,7 +4175,7 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev) mlx5e_set_netdev_dev_addr(netdev); -#if IS_ENABLED(CONFIG_NET_SWITCHDEV) && IS_ENABLED(CONFIG_MLX5_ESWITCH) +#if IS_ENABLED(CONFIG_MLX5_ESWITCH) if (MLX5_VPORT_MANAGER(mdev)) netdev->switchdev_ops = &mlx5e_switchdev_ops; #endif diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 738554a6c69f..5ece289548ad 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -900,9 +900,7 @@ static void mlx5e_build_rep_netdev(struct net_device *netdev) netdev->ethtool_ops = &mlx5e_rep_ethtool_ops; -#ifdef CONFIG_NET_SWITCHDEV netdev->switchdev_ops = &mlx5e_rep_switchdev_ops; -#endif netdev->features |= NETIF_F_VLAN_CHALLENGED | NETIF_F_HW_TC | NETIF_F_NETNS_LOCAL; netdev->hw_features |= NETIF_F_HW_TC; -- cgit v1.2.3 From b392a2078b5e0094ff38aa0c9d2a31b3f607d4ef Mon Sep 17 00:00:00 2001 From: Moshe Shemesh Date: Thu, 15 Feb 2018 12:41:48 +0200 Subject: net/mlx5e: Verify coalescing parameters in range Add check of coalescing parameters received through ethtool are within range of values supported by the HW. Driver gets the coalescing rx/tx-usecs and rx/tx-frames as set by the users through ethtool. The ethtool support up to 32 bit value for each. However, mlx5 modify cq limits the coalescing time parameter to 12 bit and coalescing frames parameters to 16 bits. Return out of range error if user tries to set these parameters to higher values. Fixes: f62b8bb8f2d3 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Moshe Shemesh Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index cc8048f68f11..59ebfdae6695 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -477,6 +477,9 @@ static int mlx5e_get_coalesce(struct net_device *netdev, return mlx5e_ethtool_get_coalesce(priv, coal); } +#define MLX5E_MAX_COAL_TIME MLX5_MAX_CQ_PERIOD +#define MLX5E_MAX_COAL_FRAMES MLX5_MAX_CQ_COUNT + static void mlx5e_set_priv_channels_coalesce(struct mlx5e_priv *priv, struct ethtool_coalesce *coal) { @@ -511,6 +514,20 @@ int mlx5e_ethtool_set_coalesce(struct mlx5e_priv *priv, if (!MLX5_CAP_GEN(mdev, cq_moderation)) return -EOPNOTSUPP; + if (coal->tx_coalesce_usecs > MLX5E_MAX_COAL_TIME || + coal->rx_coalesce_usecs > MLX5E_MAX_COAL_TIME) { + netdev_info(priv->netdev, "%s: maximum coalesce time supported is %lu usecs\n", + __func__, MLX5E_MAX_COAL_TIME); + return -ERANGE; + } + + if (coal->tx_max_coalesced_frames > MLX5E_MAX_COAL_FRAMES || + coal->rx_max_coalesced_frames > MLX5E_MAX_COAL_FRAMES) { + netdev_info(priv->netdev, "%s: maximum coalesced frames supported is %lu\n", + __func__, MLX5E_MAX_COAL_FRAMES); + return -ERANGE; + } + mutex_lock(&priv->state_lock); new_channels.params = priv->channels.params; -- cgit v1.2.3 From 4246f698dd58e3c6246fa919ef0b0a1d29a57e4a Mon Sep 17 00:00:00 2001 From: Roi Dayan Date: Wed, 28 Feb 2018 12:56:42 +0200 Subject: net/mlx5e: Fix traffic being dropped on VF representor Increase representor netdev RQ size to avoid dropped packets. The current size (two) is just too small to keep up with conventional slow path traffic patterns. Also match the SQ size to the RQ size. Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors") Signed-off-by: Roi Dayan Reviewed-by: Paul Blakey Reviewed-by: Or Gerlitz Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 5ece289548ad..9a5a2a7eeab3 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -44,6 +44,11 @@ #include "en_tc.h" #include "fs_core.h" +#define MLX5E_REP_PARAMS_LOG_SQ_SIZE \ + max(0x6, MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE) +#define MLX5E_REP_PARAMS_LOG_RQ_SIZE \ + max(0x6, MLX5E_PARAMS_MINIMUM_LOG_RQ_SIZE) + static const char mlx5e_rep_driver_name[] = "mlx5e_rep"; static void mlx5e_rep_get_drvinfo(struct net_device *dev, @@ -878,9 +883,9 @@ static void mlx5e_build_rep_params(struct mlx5_core_dev *mdev, MLX5_CQ_PERIOD_MODE_START_FROM_CQE : MLX5_CQ_PERIOD_MODE_START_FROM_EQE; - params->log_sq_size = MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE; + params->log_sq_size = MLX5E_REP_PARAMS_LOG_SQ_SIZE; params->rq_wq_type = MLX5_WQ_TYPE_LINKED_LIST; - params->log_rq_size = MLX5E_PARAMS_MINIMUM_LOG_RQ_SIZE; + params->log_rq_size = MLX5E_REP_PARAMS_LOG_RQ_SIZE; params->rx_dim_enabled = MLX5_CAP_GEN(mdev, cq_moderation); mlx5e_set_rx_cq_mode_params(params, cq_period_mode); -- cgit v1.2.3 From af1607c37d9d85a66fbcf43b7f11bf3d94b9bb69 Mon Sep 17 00:00:00 2001 From: Jianbo Liu Date: Thu, 8 Mar 2018 09:20:55 +0000 Subject: net/mlx5e: Fix memory usage issues in offloading TC flows For NIC flows, the parsed attributes are not freed when we exit successfully from mlx5e_configure_flower(). There is possible double free for eswitch flows. If error is returned from rhashtable_insert_fast(), the parse attrs will be freed in mlx5e_tc_del_flow(), but they will be freed again before exiting mlx5e_configure_flower(). To fix both issues we do the following: (1) change the condition that determines if to issue the free call to check if this flow is NIC flow, or it does not have encap action. (2) reorder the code such that that the check and free calls are done before we attempt to add into the hash table. Fixes: 232c001398ae ('net/mlx5e: Add support to neighbour update flow') Signed-off-by: Jianbo Liu Reviewed-by: Or Gerlitz Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index fa86a1466718..ae11678a31e8 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -2608,19 +2608,19 @@ int mlx5e_configure_flower(struct mlx5e_priv *priv, if (err != -EAGAIN) flow->flags |= MLX5E_TC_FLOW_OFFLOADED; + if (!(flow->flags & MLX5E_TC_FLOW_ESWITCH) || + !(flow->esw_attr->action & MLX5_FLOW_CONTEXT_ACTION_ENCAP)) + kvfree(parse_attr); + err = rhashtable_insert_fast(&tc->ht, &flow->node, tc->ht_params); - if (err) - goto err_del_rule; + if (err) { + mlx5e_tc_del_flow(priv, flow); + kfree(flow); + } - if (flow->flags & MLX5E_TC_FLOW_ESWITCH && - !(flow->esw_attr->action & MLX5_FLOW_CONTEXT_ACTION_ENCAP)) - kvfree(parse_attr); return err; -err_del_rule: - mlx5e_tc_del_flow(priv, flow); - err_free: kvfree(parse_attr); kfree(flow); -- cgit v1.2.3 From 423c9db29943cfc43e3a408192e9efa4178af6a1 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 13 Mar 2018 21:43:43 +0200 Subject: net/mlx5e: Avoid using the ipv6 stub in the TC offload neigh update path Currently we use the global ipv6_stub var to access the ipv6 global nd table. This practice gets us to troubles when the stub is only partially set e.g when ipv6 is loaded under the disabled policy. In this case, as of commit 343d60aada5a ("ipv6: change ipv6_stub_impl.ipv6_dst_lookup to take net argument") the stub is not null, but stub->nd_tbl is and we crash. As we can access the ipv6 nd_tbl directly, the fix is just to avoid the reference through the stub. There is one place in the code where we issue ipv6 route lookup and keep doing it through the stub, but that mentioned commit makes sure we get -EAFNOSUPPORT from the stack. Fixes: 232c001398ae ("net/mlx5e: Add support to neighbour update flow") Signed-off-by: Or Gerlitz Reviewed-by: Aviv Heller Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 6 +++--- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 9a5a2a7eeab3..500d817d2b0a 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -293,7 +293,7 @@ void mlx5e_remove_sqs_fwd_rules(struct mlx5e_priv *priv) static void mlx5e_rep_neigh_update_init_interval(struct mlx5e_rep_priv *rpriv) { #if IS_ENABLED(CONFIG_IPV6) - unsigned long ipv6_interval = NEIGH_VAR(&ipv6_stub->nd_tbl->parms, + unsigned long ipv6_interval = NEIGH_VAR(&nd_tbl.parms, DELAY_PROBE_TIME); #else unsigned long ipv6_interval = ~0UL; @@ -429,7 +429,7 @@ static int mlx5e_rep_netevent_event(struct notifier_block *nb, case NETEVENT_NEIGH_UPDATE: n = ptr; #if IS_ENABLED(CONFIG_IPV6) - if (n->tbl != ipv6_stub->nd_tbl && n->tbl != &arp_tbl) + if (n->tbl != &nd_tbl && n->tbl != &arp_tbl) #else if (n->tbl != &arp_tbl) #endif @@ -477,7 +477,7 @@ static int mlx5e_rep_netevent_event(struct notifier_block *nb, * done per device delay prob time parameter. */ #if IS_ENABLED(CONFIG_IPV6) - if (!p->dev || (p->tbl != ipv6_stub->nd_tbl && p->tbl != &arp_tbl)) + if (!p->dev || (p->tbl != &nd_tbl && p->tbl != &arp_tbl)) #else if (!p->dev || p->tbl != &arp_tbl) #endif diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index ae11678a31e8..43234cabf444 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -963,7 +963,7 @@ void mlx5e_tc_update_neigh_used_value(struct mlx5e_neigh_hash_entry *nhe) tbl = &arp_tbl; #if IS_ENABLED(CONFIG_IPV6) else if (m_neigh->family == AF_INET6) - tbl = ipv6_stub->nd_tbl; + tbl = &nd_tbl; #endif else return; -- cgit v1.2.3 From a117f73dc2430443f23e18367fa545981129c1a6 Mon Sep 17 00:00:00 2001 From: Shahar Klein Date: Tue, 20 Mar 2018 14:44:40 +0200 Subject: net/mlx5e: Sync netdev vxlan ports at open When mlx5_core is loaded it is expected to sync ports with all vxlan devices so it can support vxlan encap/decap. This is done via udp_tunnel_get_rx_info(). Currently this call is set in mlx5e_nic_enable() and if the netdev is not in NETREG_REGISTERED state it will not be called. Normally on load the netdev state is not NETREG_REGISTERED so udp_tunnel_get_rx_info() will not be called. Moving udp_tunnel_get_rx_info() to mlx5e_open() so it will be called on netdev UP event and allow encap/decap. Fixes: 610e89e05c3f ("net/mlx5e: Don't sync netdev state when not registered") Signed-off-by: Shahar Klein Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index e35859657217..9b4827d36e3e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -2572,6 +2572,9 @@ int mlx5e_open(struct net_device *netdev) mlx5_set_port_admin_status(priv->mdev, MLX5_PORT_UP); mutex_unlock(&priv->state_lock); + if (mlx5e_vxlan_allowed(priv->mdev)) + udp_tunnel_get_rx_info(netdev); + return err; } @@ -4327,12 +4330,6 @@ static void mlx5e_nic_enable(struct mlx5e_priv *priv) #ifdef CONFIG_MLX5_CORE_EN_DCB mlx5e_dcbnl_init_app(priv); #endif - /* Device already registered: sync netdev system state */ - if (mlx5e_vxlan_allowed(mdev)) { - rtnl_lock(); - udp_tunnel_get_rx_info(netdev); - rtnl_unlock(); - } queue_work(priv->wq, &priv->set_rx_mode_work); -- cgit v1.2.3 From d4c4bc11353f3bea6754f7d21e3612c9f32d1d64 Mon Sep 17 00:00:00 2001 From: Giuseppe Lippolis Date: Mon, 26 Mar 2018 16:34:39 +0200 Subject: net-usb: add qmi_wwan if on lte modem wistron neweb d18q1 This modem is embedded on dlink dwr-921 router. The oem configuration states: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1435 ProdID=0918 Rev= 2.32 S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution Signed-off-by: Giuseppe Lippolis Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 2508ab08fc5a..ca066b785e9f 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1104,6 +1104,9 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x0846, 0x68a2, 8)}, {QMI_FIXED_INTF(0x12d1, 0x140c, 1)}, /* Huawei E173 */ {QMI_FIXED_INTF(0x12d1, 0x14ac, 1)}, /* Huawei E1820 */ + {QMI_FIXED_INTF(0x1435, 0xd181, 3)}, /* Wistron NeWeb D18Q1 */ + {QMI_FIXED_INTF(0x1435, 0xd181, 4)}, /* Wistron NeWeb D18Q1 */ + {QMI_FIXED_INTF(0x1435, 0xd181, 5)}, /* Wistron NeWeb D18Q1 */ {QMI_FIXED_INTF(0x16d8, 0x6003, 0)}, /* CMOTech 6003 */ {QMI_FIXED_INTF(0x16d8, 0x6007, 0)}, /* CMOTech CHE-628S */ {QMI_FIXED_INTF(0x16d8, 0x6008, 0)}, /* CMOTech CMU-301 */ -- cgit v1.2.3 From 19c9ea363a244f85f90a424f9936e6d56449e33c Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Mon, 26 Mar 2018 19:19:30 +0200 Subject: r8169: fix setting driver_data after register_netdev pci_set_drvdata() is called only after registering the net_device, therefore we could run into a NPE if one of the functions using driver_data is called before it's set. Fix this by calling pci_set_drvdata() before registering the net_device. This fix is a candidate for stable. As far as I can see the bug has been there in kernel version 3.2 already, therefore I can't provide a reference which commit is fixed by it. The fix may need small adjustments per kernel version because due to other changes the label which is jumped to if register_netdev() fails has changed over time. Reported-by: David Miller Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 0bf7d1759250..b4779acb6b5c 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -8660,12 +8660,12 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (!tp->counters) return -ENOMEM; + pci_set_drvdata(pdev, dev); + rc = register_netdev(dev); if (rc < 0) return rc; - pci_set_drvdata(pdev, dev); - netif_info(tp, probe, dev, "%s at 0x%p, %pM, XID %08x IRQ %d\n", rtl_chip_infos[chipset].name, ioaddr, dev->dev_addr, (u32)(RTL_R32(TxConfig) & 0x9cf0f8ff), pdev->irq); -- cgit v1.2.3 From 6e8814ceb7e8f468659ef9253bd212c07ae19584 Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Tue, 27 Mar 2018 14:41:18 +0300 Subject: net/mlx4_en: Fix mixed PFC and Global pause user control requests Global pause and PFC configuration should be mutually exclusive (i.e. only one of them at most can be set). However, once PFC was turned off, driver automatically turned Global pause on. This is a bug. Fix the driver behaviour to turn off PFC/Global once the user turned the other on. This also fixed a weird behaviour that at a current time, the profile had both PFC and global pause configuration turned on, which is Hardware-wise impossible and caused returning false positive indication to query tools. In addition, fix error code when setting global pause or PFC to change metadata only upon successful change. Also, removed useless debug print. Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Fixes: c27a02cd94d6 ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC") Signed-off-by: Eran Ben Elisha Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c | 72 ++++++++++++++----------- drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 33 +++++++----- drivers/net/ethernet/mellanox/mlx4/en_main.c | 4 +- 3 files changed, 62 insertions(+), 47 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c index 1a0c3bf86ead..752a72499b4f 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c @@ -156,57 +156,63 @@ static int mlx4_en_dcbnl_getnumtcs(struct net_device *netdev, int tcid, u8 *num) static u8 mlx4_en_dcbnl_set_all(struct net_device *netdev) { struct mlx4_en_priv *priv = netdev_priv(netdev); + struct mlx4_en_port_profile *prof = priv->prof; struct mlx4_en_dev *mdev = priv->mdev; + u8 tx_pause, tx_ppp, rx_pause, rx_ppp; if (!(priv->dcbx_cap & DCB_CAP_DCBX_VER_CEE)) return 1; if (priv->cee_config.pfc_state) { int tc; + rx_ppp = prof->rx_ppp; + tx_ppp = prof->tx_ppp; - priv->prof->rx_pause = 0; - priv->prof->tx_pause = 0; for (tc = 0; tc < CEE_DCBX_MAX_PRIO; tc++) { u8 tc_mask = 1 << tc; switch (priv->cee_config.dcb_pfc[tc]) { case pfc_disabled: - priv->prof->tx_ppp &= ~tc_mask; - priv->prof->rx_ppp &= ~tc_mask; + tx_ppp &= ~tc_mask; + rx_ppp &= ~tc_mask; break; case pfc_enabled_full: - priv->prof->tx_ppp |= tc_mask; - priv->prof->rx_ppp |= tc_mask; + tx_ppp |= tc_mask; + rx_ppp |= tc_mask; break; case pfc_enabled_tx: - priv->prof->tx_ppp |= tc_mask; - priv->prof->rx_ppp &= ~tc_mask; + tx_ppp |= tc_mask; + rx_ppp &= ~tc_mask; break; case pfc_enabled_rx: - priv->prof->tx_ppp &= ~tc_mask; - priv->prof->rx_ppp |= tc_mask; + tx_ppp &= ~tc_mask; + rx_ppp |= tc_mask; break; default: break; } } - en_dbg(DRV, priv, "Set pfc on\n"); + rx_pause = !!(rx_ppp || tx_ppp) ? 0 : prof->rx_pause; + tx_pause = !!(rx_ppp || tx_ppp) ? 0 : prof->tx_pause; } else { - priv->prof->rx_pause = 1; - priv->prof->tx_pause = 1; - en_dbg(DRV, priv, "Set pfc off\n"); + rx_ppp = 0; + tx_ppp = 0; + rx_pause = prof->rx_pause; + tx_pause = prof->tx_pause; } if (mlx4_SET_PORT_general(mdev->dev, priv->port, priv->rx_skb_size + ETH_FCS_LEN, - priv->prof->tx_pause, - priv->prof->tx_ppp, - priv->prof->rx_pause, - priv->prof->rx_ppp)) { + tx_pause, tx_ppp, rx_pause, rx_ppp)) { en_err(priv, "Failed setting pause params\n"); return 1; } + prof->tx_ppp = tx_ppp; + prof->rx_ppp = rx_ppp; + prof->tx_pause = tx_pause; + prof->rx_pause = rx_pause; + return 0; } @@ -408,6 +414,7 @@ static int mlx4_en_dcbnl_ieee_setpfc(struct net_device *dev, struct mlx4_en_priv *priv = netdev_priv(dev); struct mlx4_en_port_profile *prof = priv->prof; struct mlx4_en_dev *mdev = priv->mdev; + u32 tx_pause, tx_ppp, rx_pause, rx_ppp; int err; en_dbg(DRV, priv, "cap: 0x%x en: 0x%x mbc: 0x%x delay: %d\n", @@ -416,23 +423,26 @@ static int mlx4_en_dcbnl_ieee_setpfc(struct net_device *dev, pfc->mbc, pfc->delay); - prof->rx_pause = !pfc->pfc_en; - prof->tx_pause = !pfc->pfc_en; - prof->rx_ppp = pfc->pfc_en; - prof->tx_ppp = pfc->pfc_en; + rx_pause = prof->rx_pause && !pfc->pfc_en; + tx_pause = prof->tx_pause && !pfc->pfc_en; + rx_ppp = pfc->pfc_en; + tx_ppp = pfc->pfc_en; err = mlx4_SET_PORT_general(mdev->dev, priv->port, priv->rx_skb_size + ETH_FCS_LEN, - prof->tx_pause, - prof->tx_ppp, - prof->rx_pause, - prof->rx_ppp); - if (err) + tx_pause, tx_ppp, rx_pause, rx_ppp); + if (err) { en_err(priv, "Failed setting pause params\n"); - else - mlx4_en_update_pfc_stats_bitmap(mdev->dev, &priv->stats_bitmap, - prof->rx_ppp, prof->rx_pause, - prof->tx_ppp, prof->tx_pause); + return err; + } + + mlx4_en_update_pfc_stats_bitmap(mdev->dev, &priv->stats_bitmap, + rx_ppp, rx_pause, tx_ppp, tx_pause); + + prof->tx_ppp = tx_ppp; + prof->rx_ppp = rx_ppp; + prof->rx_pause = rx_pause; + prof->tx_pause = tx_pause; return err; } diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c index ebc1f566a4d9..f3302edba8b4 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -1046,27 +1046,32 @@ static int mlx4_en_set_pauseparam(struct net_device *dev, { struct mlx4_en_priv *priv = netdev_priv(dev); struct mlx4_en_dev *mdev = priv->mdev; + u8 tx_pause, tx_ppp, rx_pause, rx_ppp; int err; if (pause->autoneg) return -EINVAL; - priv->prof->tx_pause = pause->tx_pause != 0; - priv->prof->rx_pause = pause->rx_pause != 0; + tx_pause = !!(pause->tx_pause); + rx_pause = !!(pause->rx_pause); + rx_ppp = priv->prof->rx_ppp && !(tx_pause || rx_pause); + tx_ppp = priv->prof->tx_ppp && !(tx_pause || rx_pause); + err = mlx4_SET_PORT_general(mdev->dev, priv->port, priv->rx_skb_size + ETH_FCS_LEN, - priv->prof->tx_pause, - priv->prof->tx_ppp, - priv->prof->rx_pause, - priv->prof->rx_ppp); - if (err) - en_err(priv, "Failed setting pause params\n"); - else - mlx4_en_update_pfc_stats_bitmap(mdev->dev, &priv->stats_bitmap, - priv->prof->rx_ppp, - priv->prof->rx_pause, - priv->prof->tx_ppp, - priv->prof->tx_pause); + tx_pause, tx_ppp, rx_pause, rx_ppp); + if (err) { + en_err(priv, "Failed setting pause params, err = %d\n", err); + return err; + } + + mlx4_en_update_pfc_stats_bitmap(mdev->dev, &priv->stats_bitmap, + rx_ppp, rx_pause, tx_ppp, tx_pause); + + priv->prof->tx_pause = tx_pause; + priv->prof->rx_pause = rx_pause; + priv->prof->tx_ppp = tx_ppp; + priv->prof->rx_ppp = rx_ppp; return err; } diff --git a/drivers/net/ethernet/mellanox/mlx4/en_main.c b/drivers/net/ethernet/mellanox/mlx4/en_main.c index 2c2965497ed3..d25e16d2c319 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_main.c @@ -163,9 +163,9 @@ static void mlx4_en_get_profile(struct mlx4_en_dev *mdev) params->udp_rss = 0; } for (i = 1; i <= MLX4_MAX_PORTS; i++) { - params->prof[i].rx_pause = 1; + params->prof[i].rx_pause = !(pfcrx || pfctx); params->prof[i].rx_ppp = pfcrx; - params->prof[i].tx_pause = 1; + params->prof[i].tx_pause = !(pfcrx || pfctx); params->prof[i].tx_ppp = pfctx; params->prof[i].tx_ring_size = MLX4_EN_DEF_TX_RING_SIZE; params->prof[i].rx_ring_size = MLX4_EN_DEF_RX_RING_SIZE; -- cgit v1.2.3 From 461d5f1b59490ce0096dfda45e10038c122a7892 Mon Sep 17 00:00:00 2001 From: Moshe Shemesh Date: Tue, 27 Mar 2018 14:41:19 +0300 Subject: net/mlx4_core: Fix memory leak while delete slave's resources mlx4_delete_all_resources_for_slave in resource tracker should free all memory allocated for a slave. While releasing memory of fs_rule, it misses releasing memory of fs_rule->mirr_mbox. Fixes: 78efed275117 ('net/mlx4_core: Support mirroring VF DMFS rules on both ports') Signed-off-by: Moshe Shemesh Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 606a0e0beeae..29e50f787349 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -5088,6 +5088,7 @@ static void rem_slave_fs_rule(struct mlx4_dev *dev, int slave) &tracker->res_tree[RES_FS_RULE]); list_del(&fs_rule->com.list); spin_unlock_irq(mlx4_tlock(dev)); + kfree(fs_rule->mirr_mbox); kfree(fs_rule); state = 0; break; -- cgit v1.2.3 From dc6455a71c7fc5117977e197f67f71b49f27baba Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Tue, 27 Mar 2018 20:50:52 +0800 Subject: vhost: correctly remove wait queue during poll failure We tried to remove vq poll from wait queue, but do not check whether or not it was in a list before. This will lead double free. Fixing this by switching to use vhost_poll_stop() which zeros poll->wqh after removing poll from waitqueue to make sure it won't be freed twice. Cc: Darren Kenny Reported-by: syzbot+c0272972b01b872e604a@syzkaller.appspotmail.com Fixes: 2b8b328b61c79 ("vhost_net: handle polling errors when setting backend") Signed-off-by: Jason Wang Reviewed-by: Darren Kenny Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/vhost/vhost.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index 1b3e8d2d5c8b..5d5a9d9e66d3 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -212,8 +212,7 @@ int vhost_poll_start(struct vhost_poll *poll, struct file *file) if (mask) vhost_poll_wakeup(&poll->wait, 0, 0, poll_to_key(mask)); if (mask & EPOLLERR) { - if (poll->wqh) - remove_wait_queue(poll->wqh, &poll->wait); + vhost_poll_stop(poll); ret = -EINVAL; } -- cgit v1.2.3 From b9fc828debc8ac2bb21b5819a44d2aea456f1c95 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Tue, 27 Mar 2018 06:34:41 -0700 Subject: qede: Fix barrier usage after tx doorbell write. Since commit c5ad119fb6c09b0297446be05bd66602fa564758 ("net: sched: pfifo_fast use skb_array") driver is exposed to an issue where it is hitting NULL skbs while handling TX completions. Driver uses mmiowb() to flush the writes to the doorbell bar which is a write-combined bar, however on x86 mmiowb() does not flush the write combined buffer. This patch fixes this problem by replacing mmiowb() with wmb() after the write combined doorbell write so that writes are flushed and synchronized from more than one processor. V1->V2: ------- This patch was marked as "superseded" in patchwork. (Not really sure for what reason).Resending it as v2. Signed-off-by: Ariel Elior Signed-off-by: Manish Chopra Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qede/qede_fp.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qede/qede_fp.c b/drivers/net/ethernet/qlogic/qede/qede_fp.c index dafc079ab6b9..2e921cab1792 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_fp.c +++ b/drivers/net/ethernet/qlogic/qede/qede_fp.c @@ -320,13 +320,11 @@ static inline void qede_update_tx_producer(struct qede_tx_queue *txq) barrier(); writel(txq->tx_db.raw, txq->doorbell_addr); - /* mmiowb is needed to synchronize doorbell writes from more than one - * processor. It guarantees that the write arrives to the device before - * the queue lock is released and another start_xmit is called (possibly - * on another CPU). Without this barrier, the next doorbell can bypass - * this doorbell. This is applicable to IA64/Altix systems. + /* Fence required to flush the write combined buffer, since another + * CPU may write to the same doorbell address and data may be lost + * due to relaxed order nature of write combined bar. */ - mmiowb(); + wmb(); } static int qede_xdp_xmit(struct qede_dev *edev, struct qede_fastpath *fp, -- cgit v1.2.3 From 9137108cc3d64ade13e753108ec611a0daed16a0 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Thu, 22 Mar 2018 14:04:23 -0600 Subject: RDMA/rdma_cm: Fix use after free race with process_one_req process_one_req() can race with rdma_addr_cancel(): CPU0 CPU1 ==== ==== process_one_work() debug_work_deactivate(work); process_one_req() rdma_addr_cancel() mutex_lock(&lock); set_timeout(&req->work,..); __queue_work() debug_work_activate(work); mutex_unlock(&lock); mutex_lock(&lock); [..] list_del(&req->list); mutex_unlock(&lock); [..] // ODEBUG explodes since the work is still queued. kfree(req); Causing ODEBUG to detect the use after free: ODEBUG: free active (active state 0) object type: work_struct hint: process_one_req+0x0/0x6c0 include/net/dst.h:165 WARNING: CPU: 0 PID: 79 at lib/debugobjects.c:291 debug_print_object+0x166/0x220 lib/debugobjects.c:288 kvm: emulating exchange as write Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 79 Comm: kworker/u4:3 Not tainted 4.16.0-rc6+ #361 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: ib_addr process_one_req Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x24d lib/dump_stack.c:53 panic+0x1e4/0x41c kernel/panic.c:183 __warn+0x1dc/0x200 kernel/panic.c:547 report_bug+0x1f4/0x2b0 lib/bug.c:186 fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178 fixup_bug arch/x86/kernel/traps.c:247 [inline] do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315 invalid_op+0x1b/0x40 arch/x86/entry/entry_64.S:986 RIP: 0010:debug_print_object+0x166/0x220 lib/debugobjects.c:288 RSP: 0000:ffff8801d966f210 EFLAGS: 00010086 RAX: dffffc0000000008 RBX: 0000000000000003 RCX: ffffffff815acd6e RDX: 0000000000000000 RSI: 1ffff1003b2cddf2 RDI: 0000000000000000 RBP: ffff8801d966f250 R08: 0000000000000000 R09: 1ffff1003b2cddc8 R10: ffffed003b2cde71 R11: ffffffff86f39a98 R12: 0000000000000001 R13: ffffffff86f15540 R14: ffffffff86408700 R15: ffffffff8147c0a0 __debug_check_no_obj_freed lib/debugobjects.c:745 [inline] debug_check_no_obj_freed+0x662/0xf1f lib/debugobjects.c:774 kfree+0xc7/0x260 mm/slab.c:3799 process_one_req+0x2e7/0x6c0 drivers/infiniband/core/addr.c:592 process_one_work+0xc47/0x1bb0 kernel/workqueue.c:2113 worker_thread+0x223/0x1990 kernel/workqueue.c:2247 kthread+0x33c/0x400 kernel/kthread.c:238 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:406 Fixes: 5fff41e1f89d ("IB/core: Fix race condition in resolving IP to MAC") Reported-by: Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/addr.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c index 9183d148d644..c3e6811bb1bd 100644 --- a/drivers/infiniband/core/addr.c +++ b/drivers/infiniband/core/addr.c @@ -586,6 +586,15 @@ static void process_one_req(struct work_struct *_work) list_del(&req->list); mutex_unlock(&lock); + /* + * Although the work will normally have been canceled by the + * workqueue, it can still be requeued as long as it is on the + * req_list, so it could have been requeued before we grabbed &lock. + * We need to cancel it after it is removed from req_list to really be + * sure it is safe to free. + */ + cancel_delayed_work(&req->work); + req->callback(req->status, (struct sockaddr *)&req->src_addr, req->addr, req->context); put_client(req->client); -- cgit v1.2.3 From 4b658d1bbc16605330694bb3ef2570c465ef383d Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Sun, 25 Mar 2018 11:23:55 +0300 Subject: RDMA/ucma: Check that device is connected prior to access it Add missing check that device is connected prior to access it. [ 55.358652] BUG: KASAN: null-ptr-deref in rdma_init_qp_attr+0x4a/0x2c0 [ 55.359389] Read of size 8 at addr 00000000000000b0 by task qp/618 [ 55.360255] [ 55.360432] CPU: 1 PID: 618 Comm: qp Not tainted 4.16.0-rc1-00071-gcaf61b1b8b88 #91 [ 55.361693] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 55.363264] Call Trace: [ 55.363833] dump_stack+0x5c/0x77 [ 55.364215] kasan_report+0x163/0x380 [ 55.364610] ? rdma_init_qp_attr+0x4a/0x2c0 [ 55.365238] rdma_init_qp_attr+0x4a/0x2c0 [ 55.366410] ucma_init_qp_attr+0x111/0x200 [ 55.366846] ? ucma_notify+0xf0/0xf0 [ 55.367405] ? _get_random_bytes+0xea/0x1b0 [ 55.367846] ? urandom_read+0x2f0/0x2f0 [ 55.368436] ? kmem_cache_alloc_trace+0xd2/0x1e0 [ 55.369104] ? refcount_inc_not_zero+0x9/0x60 [ 55.369583] ? refcount_inc+0x5/0x30 [ 55.370155] ? rdma_create_id+0x215/0x240 [ 55.370937] ? _copy_to_user+0x4f/0x60 [ 55.371620] ? mem_cgroup_commit_charge+0x1f5/0x290 [ 55.372127] ? _copy_from_user+0x5e/0x90 [ 55.372720] ucma_write+0x174/0x1f0 [ 55.373090] ? ucma_close_id+0x40/0x40 [ 55.373805] ? __lru_cache_add+0xa8/0xd0 [ 55.374403] __vfs_write+0xc4/0x350 [ 55.374774] ? kernel_read+0xa0/0xa0 [ 55.375173] ? fsnotify+0x899/0x8f0 [ 55.375544] ? fsnotify_unmount_inodes+0x170/0x170 [ 55.376689] ? __fsnotify_update_child_dentry_flags+0x30/0x30 [ 55.377522] ? handle_mm_fault+0x174/0x320 [ 55.378169] vfs_write+0xf7/0x280 [ 55.378864] SyS_write+0xa1/0x120 [ 55.379270] ? SyS_read+0x120/0x120 [ 55.379643] ? mm_fault_error+0x180/0x180 [ 55.380071] ? task_work_run+0x7d/0xd0 [ 55.380910] ? __task_pid_nr_ns+0x120/0x140 [ 55.381366] ? SyS_read+0x120/0x120 [ 55.381739] do_syscall_64+0xeb/0x250 [ 55.382143] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 55.382841] RIP: 0033:0x7fc2ef803e99 [ 55.383227] RSP: 002b:00007fffcc5f3be8 EFLAGS: 00000217 ORIG_RAX: 0000000000000001 [ 55.384173] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc2ef803e99 [ 55.386145] RDX: 0000000000000057 RSI: 0000000020000080 RDI: 0000000000000003 [ 55.388418] RBP: 00007fffcc5f3c00 R08: 0000000000000000 R09: 0000000000000000 [ 55.390542] R10: 0000000000000000 R11: 0000000000000217 R12: 0000000000400480 [ 55.392916] R13: 00007fffcc5f3cf0 R14: 0000000000000000 R15: 0000000000000000 [ 55.521088] Code: e5 4d 1e ff 48 89 df 44 0f b6 b3 b8 01 00 00 e8 65 50 1e ff 4c 8b 2b 49 8d bd b0 00 00 00 e8 56 50 1e ff 41 0f b6 c6 48 c1 e0 04 <49> 03 85 b0 00 00 00 48 8d 78 08 48 89 04 24 e8 3a 4f 1e ff 48 [ 55.525980] RIP: rdma_init_qp_attr+0x52/0x2c0 RSP: ffff8801e2c2f9d8 [ 55.532648] CR2: 00000000000000b0 [ 55.534396] ---[ end trace 70cee64090251c0b ]--- Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace") Fixes: d541e45500bd ("IB/core: Convert ah_attr from OPA to IB when copying to user") Reported-by: Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/ucma.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c index 60449d611fb4..0811f58c670f 100644 --- a/drivers/infiniband/core/ucma.c +++ b/drivers/infiniband/core/ucma.c @@ -1166,6 +1166,11 @@ static ssize_t ucma_init_qp_attr(struct ucma_file *file, if (IS_ERR(ctx)) return PTR_ERR(ctx); + if (!ctx->cm_id->device) { + ret = -EINVAL; + goto out; + } + resp.qp_attr_mask = 0; memset(&qp_attr, 0, sizeof qp_attr); qp_attr.qp_state = cmd.qp_state; -- cgit v1.2.3 From c8d3bcbfc5eab3f01cf373d039af725f3b488813 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Sun, 25 Mar 2018 11:39:05 +0300 Subject: RDMA/ucma: Check that device exists prior to accessing it Ensure that device exists prior to accessing its properties. Reported-by: Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace") Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/ucma.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c index 0811f58c670f..21585055cf32 100644 --- a/drivers/infiniband/core/ucma.c +++ b/drivers/infiniband/core/ucma.c @@ -1336,7 +1336,7 @@ static ssize_t ucma_notify(struct ucma_file *file, const char __user *inbuf, { struct rdma_ucm_notify cmd; struct ucma_context *ctx; - int ret; + int ret = -EINVAL; if (copy_from_user(&cmd, inbuf, sizeof(cmd))) return -EFAULT; @@ -1345,7 +1345,9 @@ static ssize_t ucma_notify(struct ucma_file *file, const char __user *inbuf, if (IS_ERR(ctx)) return PTR_ERR(ctx); - ret = rdma_notify(ctx->cm_id, (enum ib_event_type) cmd.event); + if (ctx->cm_id->device) + ret = rdma_notify(ctx->cm_id, (enum ib_event_type)cmd.event); + ucma_put_ctx(ctx); return ret; } -- cgit v1.2.3 From 38759d6175d338fbf9282c8ea2b51f3b7ab9bc98 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 26 Mar 2018 16:10:18 +0100 Subject: RDMA/hns: ensure for-loop actually iterates and free's buffers The current for-loop zeros variable i and only loops once, hence not all the buffers are free'd. Fix this by setting i correctly. Detected by CoverityScan, CID#1463415 ("Operands don't affect result") Fixes: a5073d6054f7 ("RDMA/hns: Add eq support of hip08") Signed-off-by: Colin Ian King Reviewed-by: Yixian Liu Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c index db2ff352d75f..ec638778661c 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c @@ -4383,7 +4383,7 @@ err_dma_alloc_buf: eq->l0_dma = 0; if (mhop_num == 1) - for (i -= i; i >= 0; i--) + for (i -= 1; i >= 0; i--) dma_free_coherent(dev, buf_chk_sz, eq->buf[i], eq->buf_dma[i]); else if (mhop_num == 2) { -- cgit v1.2.3 From ef1b204a7024de1a813a7bf7d68c45fac9b9d1a3 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 28 Mar 2018 12:52:10 +0000 Subject: drm/tegra: dc: Using NULL instead of plain integer Fixes the following sparse warnings: drivers/gpu/drm/tegra/dc.c:2181:69: warning: Using plain integer as NULL pointer Signed-off-by: Wei Yongjun Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/dc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c index c1a5ae8faaef..90b25ce363ca 100644 --- a/drivers/gpu/drm/tegra/dc.c +++ b/drivers/gpu/drm/tegra/dc.c @@ -2160,7 +2160,7 @@ static int tegra_dc_couple(struct tegra_dc *dc) struct device_link *link; struct device *partner; - partner = driver_find_device(dc->dev->driver, NULL, 0, + partner = driver_find_device(dc->dev->driver, NULL, NULL, tegra_dc_match_by_pipe); if (!partner) return -EPROBE_DEFER; -- cgit v1.2.3 From 84652aefb347297aa08e91e283adf7b18f77c2d5 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 28 Mar 2018 11:27:22 -0700 Subject: RDMA/ucma: Introduce safer rdma_addr_size() variants There are several places in the ucma ABI where userspace can pass in a sockaddr but set the address family to AF_IB. When that happens, rdma_addr_size() will return a size bigger than sizeof struct sockaddr_in6, and the ucma kernel code might end up copying past the end of a buffer not sized for a struct sockaddr_ib. Fix this by introducing new variants int rdma_addr_size_in6(struct sockaddr_in6 *addr); int rdma_addr_size_kss(struct __kernel_sockaddr_storage *addr); that are type-safe for the types used in the ucma ABI and return 0 if the size computed is bigger than the size of the type passed in. We can use these new variants to check what size userspace has passed in before copying any addresses. Reported-by: Signed-off-by: Roland Dreier Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/addr.c | 16 ++++++++++++++++ drivers/infiniband/core/ucma.c | 34 +++++++++++++++++----------------- 2 files changed, 33 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c index c3e6811bb1bd..cb1d2ab13c66 100644 --- a/drivers/infiniband/core/addr.c +++ b/drivers/infiniband/core/addr.c @@ -207,6 +207,22 @@ int rdma_addr_size(struct sockaddr *addr) } EXPORT_SYMBOL(rdma_addr_size); +int rdma_addr_size_in6(struct sockaddr_in6 *addr) +{ + int ret = rdma_addr_size((struct sockaddr *) addr); + + return ret <= sizeof(*addr) ? ret : 0; +} +EXPORT_SYMBOL(rdma_addr_size_in6); + +int rdma_addr_size_kss(struct __kernel_sockaddr_storage *addr) +{ + int ret = rdma_addr_size((struct sockaddr *) addr); + + return ret <= sizeof(*addr) ? ret : 0; +} +EXPORT_SYMBOL(rdma_addr_size_kss); + static struct rdma_addr_client self; void rdma_addr_register_client(struct rdma_addr_client *client) diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c index 21585055cf32..d933336d7e01 100644 --- a/drivers/infiniband/core/ucma.c +++ b/drivers/infiniband/core/ucma.c @@ -632,6 +632,9 @@ static ssize_t ucma_bind_ip(struct ucma_file *file, const char __user *inbuf, if (copy_from_user(&cmd, inbuf, sizeof(cmd))) return -EFAULT; + if (!rdma_addr_size_in6(&cmd.addr)) + return -EINVAL; + ctx = ucma_get_ctx(file, cmd.id); if (IS_ERR(ctx)) return PTR_ERR(ctx); @@ -645,22 +648,21 @@ static ssize_t ucma_bind(struct ucma_file *file, const char __user *inbuf, int in_len, int out_len) { struct rdma_ucm_bind cmd; - struct sockaddr *addr; struct ucma_context *ctx; int ret; if (copy_from_user(&cmd, inbuf, sizeof(cmd))) return -EFAULT; - addr = (struct sockaddr *) &cmd.addr; - if (cmd.reserved || !cmd.addr_size || (cmd.addr_size != rdma_addr_size(addr))) + if (cmd.reserved || !cmd.addr_size || + cmd.addr_size != rdma_addr_size_kss(&cmd.addr)) return -EINVAL; ctx = ucma_get_ctx(file, cmd.id); if (IS_ERR(ctx)) return PTR_ERR(ctx); - ret = rdma_bind_addr(ctx->cm_id, addr); + ret = rdma_bind_addr(ctx->cm_id, (struct sockaddr *) &cmd.addr); ucma_put_ctx(ctx); return ret; } @@ -670,23 +672,22 @@ static ssize_t ucma_resolve_ip(struct ucma_file *file, int in_len, int out_len) { struct rdma_ucm_resolve_ip cmd; - struct sockaddr *src, *dst; struct ucma_context *ctx; int ret; if (copy_from_user(&cmd, inbuf, sizeof(cmd))) return -EFAULT; - src = (struct sockaddr *) &cmd.src_addr; - dst = (struct sockaddr *) &cmd.dst_addr; - if (!rdma_addr_size(src) || !rdma_addr_size(dst)) + if (!rdma_addr_size_in6(&cmd.src_addr) || + !rdma_addr_size_in6(&cmd.dst_addr)) return -EINVAL; ctx = ucma_get_ctx(file, cmd.id); if (IS_ERR(ctx)) return PTR_ERR(ctx); - ret = rdma_resolve_addr(ctx->cm_id, src, dst, cmd.timeout_ms); + ret = rdma_resolve_addr(ctx->cm_id, (struct sockaddr *) &cmd.src_addr, + (struct sockaddr *) &cmd.dst_addr, cmd.timeout_ms); ucma_put_ctx(ctx); return ret; } @@ -696,24 +697,23 @@ static ssize_t ucma_resolve_addr(struct ucma_file *file, int in_len, int out_len) { struct rdma_ucm_resolve_addr cmd; - struct sockaddr *src, *dst; struct ucma_context *ctx; int ret; if (copy_from_user(&cmd, inbuf, sizeof(cmd))) return -EFAULT; - src = (struct sockaddr *) &cmd.src_addr; - dst = (struct sockaddr *) &cmd.dst_addr; - if (cmd.reserved || (cmd.src_size && (cmd.src_size != rdma_addr_size(src))) || - !cmd.dst_size || (cmd.dst_size != rdma_addr_size(dst))) + if (cmd.reserved || + (cmd.src_size && (cmd.src_size != rdma_addr_size_kss(&cmd.src_addr))) || + !cmd.dst_size || (cmd.dst_size != rdma_addr_size_kss(&cmd.dst_addr))) return -EINVAL; ctx = ucma_get_ctx(file, cmd.id); if (IS_ERR(ctx)) return PTR_ERR(ctx); - ret = rdma_resolve_addr(ctx->cm_id, src, dst, cmd.timeout_ms); + ret = rdma_resolve_addr(ctx->cm_id, (struct sockaddr *) &cmd.src_addr, + (struct sockaddr *) &cmd.dst_addr, cmd.timeout_ms); ucma_put_ctx(ctx); return ret; } @@ -1433,7 +1433,7 @@ static ssize_t ucma_join_ip_multicast(struct ucma_file *file, join_cmd.response = cmd.response; join_cmd.uid = cmd.uid; join_cmd.id = cmd.id; - join_cmd.addr_size = rdma_addr_size((struct sockaddr *) &cmd.addr); + join_cmd.addr_size = rdma_addr_size_in6(&cmd.addr); if (!join_cmd.addr_size) return -EINVAL; @@ -1452,7 +1452,7 @@ static ssize_t ucma_join_multicast(struct ucma_file *file, if (copy_from_user(&cmd, inbuf, sizeof(cmd))) return -EFAULT; - if (!rdma_addr_size((struct sockaddr *)&cmd.addr)) + if (!rdma_addr_size_kss(&cmd.addr)) return -EINVAL; return ucma_process_join(file, &cmd, out_len); -- cgit v1.2.3 From 2d2d99ec13f62d5d2cecb6169dfdb6bbe05356d0 Mon Sep 17 00:00:00 2001 From: Raghuram Chary J Date: Tue, 27 Mar 2018 14:51:16 +0530 Subject: lan78xx: Crash in lan78xx_writ_reg (Workqueue: events lan78xx_deferred_multicast_write) Description: Crash was reported with syzkaller pointing to lan78xx_write_reg routine. Root-cause: Proper cleanup of workqueues and init/setup routines was not happening in failure conditions. Fix: Handled the error conditions by cleaning up the queues and init/setup routines. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Reported-by: Andrey Konovalov Signed-off-by: Raghuram Chary J Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 90d176279152..55a78eb96961 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -2873,8 +2873,7 @@ static int lan78xx_bind(struct lan78xx_net *dev, struct usb_interface *intf) if (ret < 0) { netdev_warn(dev->net, "lan78xx_setup_irq_domain() failed : %d", ret); - kfree(pdata); - return ret; + goto out1; } dev->net->hard_header_len += TX_OVERHEAD; @@ -2882,14 +2881,32 @@ static int lan78xx_bind(struct lan78xx_net *dev, struct usb_interface *intf) /* Init all registers */ ret = lan78xx_reset(dev); + if (ret) { + netdev_warn(dev->net, "Registers INIT FAILED...."); + goto out2; + } ret = lan78xx_mdio_init(dev); + if (ret) { + netdev_warn(dev->net, "MDIO INIT FAILED....."); + goto out2; + } dev->net->flags |= IFF_MULTICAST; pdata->wol = WAKE_MAGIC; return ret; + +out2: + lan78xx_remove_irq_domain(dev); + +out1: + netdev_warn(dev->net, "Bind routine FAILED"); + cancel_work_sync(&pdata->set_multicast); + cancel_work_sync(&pdata->set_vlan); + kfree(pdata); + return ret; } static void lan78xx_unbind(struct lan78xx_net *dev, struct usb_interface *intf) @@ -2901,6 +2918,8 @@ static void lan78xx_unbind(struct lan78xx_net *dev, struct usb_interface *intf) lan78xx_remove_mdio(dev); if (pdata) { + cancel_work_sync(&pdata->set_multicast); + cancel_work_sync(&pdata->set_vlan); netif_dbg(dev, ifdown, dev->net, "free pdata"); kfree(pdata); pdata = NULL; -- cgit v1.2.3 From f03dbb06dc380274e351ca4b1ee1587ed4529e62 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 27 Mar 2018 11:28:48 -0700 Subject: hv_netvsc: enable multicast if necessary My recent change to netvsc drive in how receive flags are handled broke multicast. The Hyper-v/Azure virtual interface there is not a multicast filter list, filtering is only all or none. The driver must enable all multicast if any multicast address is present. Fixes: 009f766ca238 ("hv_netvsc: filter multicast/broadcast") Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/hyperv/rndis_filter.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c index a6ec41c399d6..465c42e30508 100644 --- a/drivers/net/hyperv/rndis_filter.c +++ b/drivers/net/hyperv/rndis_filter.c @@ -858,7 +858,7 @@ static void rndis_set_multicast(struct work_struct *w) if (flags & IFF_PROMISC) { filter = NDIS_PACKET_TYPE_PROMISCUOUS; } else { - if (flags & IFF_ALLMULTI) + if (!netdev_mc_empty(rdev->ndev) || (flags & IFF_ALLMULTI)) filter |= NDIS_PACKET_TYPE_ALL_MULTICAST; if (flags & IFF_BROADCAST) filter |= NDIS_PACKET_TYPE_BROADCAST; -- cgit v1.2.3 From 2b1b1b4ac716fd929a2d221bd4ade62263bed915 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 27 Mar 2018 19:01:58 +0200 Subject: mtd: nand: atmel: Fix get_sectorsize() function get_sectorsize() was not using the appropriate macro to extract the ECC sector size from the config cache, which led to buggy ECC when using 1024 byte sectors. Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver") Cc: Reported-by: Olivier Schonken Signed-off-by: Boris Brezillon Reviewed-by: Richard Weinberger Acked-by: Nicolas Ferre Tested-by: Olivier Schonken --- drivers/mtd/nand/atmel/pmecc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/atmel/pmecc.c b/drivers/mtd/nand/atmel/pmecc.c index fcbe4fd6e684..ca0a70389ba9 100644 --- a/drivers/mtd/nand/atmel/pmecc.c +++ b/drivers/mtd/nand/atmel/pmecc.c @@ -426,7 +426,7 @@ static int get_strength(struct atmel_pmecc_user *user) static int get_sectorsize(struct atmel_pmecc_user *user) { - return user->cache.cfg & PMECC_LOOKUP_TABLE_SIZE_1024 ? 1024 : 512; + return user->cache.cfg & PMECC_CFG_SECTOR1024 ? 1024 : 512; } static void atmel_pmecc_gen_syndrome(struct atmel_pmecc_user *user, int sector) -- cgit v1.2.3 From 87a73eb5b56fd6e07c8e499fe8608ef2d8912b82 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 3 Mar 2018 23:29:03 +0100 Subject: mtd: jedec_probe: Fix crash in jedec_read_mfr() It turns out that the loop where we read manufacturer jedec_read_mfd() can under some circumstances get a CFI_MFR_CONTINUATION repeatedly, making the loop go over all banks and eventually hit the end of the map and crash because of an access violation: Unable to handle kernel paging request at virtual address c4980000 pgd = (ptrval) [c4980000] *pgd=03808811, *pte=00000000, *ppte=00000000 Internal error: Oops: 7 [#1] PREEMPT ARM CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc1+ #150 Hardware name: Gemini (Device Tree) PC is at jedec_probe_chip+0x6ec/0xcd0 LR is at 0x4 pc : [] lr : [<00000004>] psr: 60000013 sp : c382dd18 ip : 0000ffff fp : 00000000 r10: c0626388 r9 : 00020000 r8 : c0626340 r7 : 00000000 r6 : 00000001 r5 : c3a71afc r4 : c382dd70 r3 : 00000001 r2 : c4900000 r1 : 00000002 r0 : 00080000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 0000397f Table: 00004000 DAC: 00000053 Process swapper (pid: 1, stack limit = 0x(ptrval)) Fix this by breaking the loop with a return 0 if the offset exceeds the map size. Fixes: 5c9c11e1c47c ("[MTD] [NOR] Add support for flash chips with ID in bank other than 0") Cc: Signed-off-by: Linus Walleij Signed-off-by: Boris Brezillon --- drivers/mtd/chips/jedec_probe.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index 7c0b27d132b1..b479bd81120b 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c @@ -1889,6 +1889,8 @@ static inline u32 jedec_read_mfr(struct map_info *map, uint32_t base, do { uint32_t ofs = cfi_build_cmd_addr(0 + (bank << 8), map, cfi); mask = (1 << (cfi->device_type * 8)) - 1; + if (ofs >= map->size) + return 0; result = map_read(map, base + ofs); bank++; } while ((result.x[0] & mask) == CFI_MFR_CONTINUATION); -- cgit v1.2.3 From 58f101bf87e32753342a6924772c6ebb0fbde24a Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Wed, 28 Mar 2018 03:35:52 -0700 Subject: qede: Do not drop rx-checksum invalidated packets. Today, driver drops received packets which are indicated as invalid checksum by the device. Instead of dropping such packets, pass them to the stack with CHECKSUM_NONE indication in skb. Signed-off-by: Ariel Elior Signed-off-by: Manish Chopra Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qede/qede_fp.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qede/qede_fp.c b/drivers/net/ethernet/qlogic/qede/qede_fp.c index 2e921cab1792..14941303189d 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_fp.c +++ b/drivers/net/ethernet/qlogic/qede/qede_fp.c @@ -1247,16 +1247,10 @@ static int qede_rx_process_cqe(struct qede_dev *edev, csum_flag = qede_check_csum(parse_flag); if (unlikely(csum_flag == QEDE_CSUM_ERROR)) { - if (qede_pkt_is_ip_fragmented(fp_cqe, parse_flag)) { + if (qede_pkt_is_ip_fragmented(fp_cqe, parse_flag)) rxq->rx_ip_frags++; - } else { - DP_NOTICE(edev, - "CQE has error, flags = %x, dropping incoming packet\n", - parse_flag); + else rxq->rx_hw_errors++; - qede_recycle_rx_bd_ring(rxq, fp_cqe->bd_num); - return 0; - } } /* Basic validation passed; Need to prepare an SKB. This would also -- cgit v1.2.3 From d65026c6c62e7d9616c8ceb5a53b68bcdc050525 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Thu, 29 Mar 2018 16:00:04 +0800 Subject: vhost: validate log when IOTLB is enabled Vq log_base is the userspace address of bitmap which has nothing to do with IOTLB. So it needs to be validated unconditionally otherwise we may try use 0 as log_base which may lead to pin pages that will lead unexpected result (e.g trigger BUG_ON() in set_bit_to_user()). Fixes: 6b1e6cc7855b0 ("vhost: new device IOTLB API") Reported-by: syzbot+6304bf97ef436580fede@syzkaller.appspotmail.com Signed-off-by: Jason Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/vhost/vhost.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index 5d5a9d9e66d3..5320039671b7 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -1244,14 +1244,12 @@ static int vq_log_access_ok(struct vhost_virtqueue *vq, /* Caller should have vq mutex and device mutex */ int vhost_vq_access_ok(struct vhost_virtqueue *vq) { - if (vq->iotlb) { - /* When device IOTLB was used, the access validation - * will be validated during prefetching. - */ - return 1; - } - return vq_access_ok(vq, vq->num, vq->desc, vq->avail, vq->used) && - vq_log_access_ok(vq, vq->log_base); + int ret = vq_log_access_ok(vq, vq->log_base); + + if (ret || vq->iotlb) + return ret; + + return vq_access_ok(vq, vq->num, vq->desc, vq->avail, vq->used); } EXPORT_SYMBOL_GPL(vhost_vq_access_ok); -- cgit v1.2.3 From e457edf0b21c873be827b7c2f6b8e1545485c415 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Thu, 29 Mar 2018 11:50:10 -0400 Subject: dm mpath: fix support for loading scsi_dh modules during table load The ability to have multipath dynamically attach a scsi_dh, that the user specified in the multipath table, was broken by commit e8f74a0f00 ("dm mpath: eliminate need to use scsi_device_from_queue"). Restore the ability to load, and attach, a particular scsi_dh module if one is specified (as noticed by checking m->hw_handler_name). Fixes: e8f74a0f00 ("dm mpath: eliminate need to use scsi_device_from_queue") Reported-by: Paul Mackerras Signed-off-by: Mike Snitzer --- drivers/md/dm-mpath.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index a05a560d3cba..a6b7baf31cdd 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -887,7 +887,7 @@ static struct pgpath *parse_path(struct dm_arg_set *as, struct path_selector *ps q = bdev_get_queue(p->path.dev->bdev); attached_handler_name = scsi_dh_attached_handler_name(q, GFP_KERNEL); - if (attached_handler_name) { + if (attached_handler_name || m->hw_handler_name) { INIT_DELAYED_WORK(&p->activate_path, activate_path_work); r = setup_scsi_dh(p->path.dev->bdev, m, attached_handler_name, &ti->error); if (r) { -- cgit v1.2.3 From da5dadb4f11660ca67580cd4a7420161266d6254 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Thu, 29 Mar 2018 23:31:32 -0400 Subject: dm: fix dropped return code from dm_get_bdev_for_ioctl dm_get_bdev_for_ioctl()'s return of 0 or 1 must be the result from prepare_ioctl (1 means the ioctl was issued to a partition, 0 means it wasn't). Unfortunately commit 519049afea ("dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl") reused the variable 'r' to store the return from blkdev_get() that follows prepare_ioctl() -- whereby dropping prepare_ioctl()'s result on the floor. This can lead to an ioctl or persistent reservation being issued to a partition going unnoticed, which implies the extra permission check for CAP_SYS_RAWIO is skipped. Fix this by using a different variable to store blkdev_get()'s return. Fixes: 519049afea ("dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl") Reported-by: Alasdair G Kergon Signed-off-by: Mike Snitzer --- drivers/md/dm.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 45328d8b2859..353ea0ede091 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -466,7 +466,7 @@ static int dm_get_bdev_for_ioctl(struct mapped_device *md, { struct dm_target *tgt; struct dm_table *map; - int srcu_idx, r; + int srcu_idx, r, r2; retry: r = -ENOTTY; @@ -492,9 +492,11 @@ retry: goto out; bdgrab(*bdev); - r = blkdev_get(*bdev, *mode, _dm_claim_ptr); - if (r < 0) + r2 = blkdev_get(*bdev, *mode, _dm_claim_ptr); + if (r2 < 0) { + r = r2; goto out; + } dm_put_live_table(md, srcu_idx); return r; -- cgit v1.2.3 From a9645b273e22662ebea563eae334eb3e4fc6614e Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 29 Mar 2018 00:18:53 +0100 Subject: atm: iphase: fix spelling mistake: "Receiverd" -> "Received" Trivial fix to spelling mistake in message text Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/atm/iphase.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index 98a3a43484c8..44abb8a0a5e5 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -3147,7 +3147,7 @@ static int ia_proc_read(struct atm_dev *dev,loff_t *pos,char *page) " Size of Tx Buffer : %u\n" " Number of Rx Buffer: %u\n" " Size of Rx Buffer : %u\n" - " Packets Receiverd : %u\n" + " Packets Received : %u\n" " Packets Transmitted: %u\n" " Cells Received : %u\n" " Cells Transmitted : %u\n" -- cgit v1.2.3 From 82dd0d2a9a76fc8fa2b18d80b987d455728bf83a Mon Sep 17 00:00:00 2001 From: David Ahern Date: Thu, 29 Mar 2018 12:49:52 -0700 Subject: vrf: Fix use after free and double free in vrf_finish_output Miguel reported an skb use after free / double free in vrf_finish_output when neigh_output returns an error. The vrf driver should return after the call to neigh_output as it takes over the skb on error path as well. Patch is a simplified version of Miguel's patch which was written for 4.9, and updated to top of tree. Fixes: 8f58336d3f78a ("net: Add ethernet header for pass through VRF device") Signed-off-by: Miguel Fadon Perlines Signed-off-by: David Ahern Signed-off-by: David S. Miller --- drivers/net/vrf.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index 139c61c8244a..ac40924fe437 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -578,12 +578,13 @@ static int vrf_finish_output(struct net *net, struct sock *sk, struct sk_buff *s if (!IS_ERR(neigh)) { sock_confirm_neigh(skb, neigh); ret = neigh_output(neigh, skb); + rcu_read_unlock_bh(); + return ret; } rcu_read_unlock_bh(); err: - if (unlikely(ret < 0)) - vrf_tx_error(skb->dev, skb); + vrf_tx_error(skb->dev, skb); return ret; } -- cgit v1.2.3 From e81b5e01c14add8395dfba7130f8829206bb507d Mon Sep 17 00:00:00 2001 From: Yelena Krivosheev Date: Fri, 30 Mar 2018 12:05:31 +0200 Subject: net: mvneta: fix enable of all initialized RXQs In mvneta_port_up() we enable relevant RX and TX port queues by write queues bit map to an appropriate register. q_map must be ZERO in the beginning of this process. Signed-off-by: Yelena Krivosheev Signed-off-by: Gregory CLEMENT Acked-by: Thomas Petazzoni Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 25e9a551cc8c..3f6fb635738c 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -1132,6 +1132,7 @@ static void mvneta_port_up(struct mvneta_port *pp) } mvreg_write(pp, MVNETA_TXQ_CMD, q_map); + q_map = 0; /* Enable all initialized RXQs. */ for (queue = 0; queue < rxq_number; queue++) { struct mvneta_rx_queue *rxq = &pp->rxqs[queue]; -- cgit v1.2.3