From 501bf0354df9348dcd199d7f6f57c13fed7a45cb Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 26 Apr 2012 15:56:10 +0100 Subject: ASoC: wm8996: Put the microphone biases into bypass mode when idle When we're not actively doing audio we don't need the microphone biases to be regulated, noise is not important when we are not looking at the audio signal. Save some power by putting the MICBIAS regulators into bypass mode when not doing audio. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8996.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'sound') diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c index 1fd635494045..8af422e38fd0 100644 --- a/sound/soc/codecs/wm8996.c +++ b/sound/soc/codecs/wm8996.c @@ -1770,7 +1770,13 @@ static int wm8996_set_bias_level(struct snd_soc_codec *codec, switch (level) { case SND_SOC_BIAS_ON: + break; case SND_SOC_BIAS_PREPARE: + /* Put the MICBIASes into regulating mode */ + snd_soc_update_bits(codec, WM8996_MICBIAS_1, + WM8996_MICB1_MODE, 0); + snd_soc_update_bits(codec, WM8996_MICBIAS_2, + WM8996_MICB2_MODE, 0); break; case SND_SOC_BIAS_STANDBY: @@ -1793,6 +1799,12 @@ static int wm8996_set_bias_level(struct snd_soc_codec *codec, regcache_cache_only(codec->control_data, false); regcache_sync(codec->control_data); } + + /* Bypass the MICBIASes for lowest power */ + snd_soc_update_bits(codec, WM8996_MICBIAS_1, + WM8996_MICB1_MODE, WM8996_MICB1_MODE); + snd_soc_update_bits(codec, WM8996_MICBIAS_2, + WM8996_MICB2_MODE, WM8996_MICB2_MODE); break; case SND_SOC_BIAS_OFF: -- cgit v1.2.3