From 59c6a3a43b221cc2a211181b1298e43b2c2df782 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Fri, 23 Feb 2024 18:51:08 +0100 Subject: ASoC: meson: axg-tdm-interface: add frame rate constraint According to Amlogic datasheets for the SoCs supported by this driver, the maximum bit clock rate is 100MHz. The tdm interface allows the rates listed by the DAI driver, regardless of the number slots or their width. However, these will impact the bit clock rate. Hitting the 100MHz limit is very unlikely for most use cases but it is possible. For example with 32 slots / 32 bits wide, the maximum rate is no longer 384kHz but ~96kHz. Add the constraint accordingly if the component is not already active. If it is active, the rate is already constrained by the first stream rate. Fixes: d60e4f1e4be5 ("ASoC: meson: add tdm interface driver") Signed-off-by: Jerome Brunet Link: https://msgid.link/r/20240223175116.2005407-3-jbrunet@baylibre.com Signed-off-by: Mark Brown --- sound/soc/meson/axg-tdm-interface.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) (limited to 'sound') diff --git a/sound/soc/meson/axg-tdm-interface.c b/sound/soc/meson/axg-tdm-interface.c index cd5168e826df..2cedbce73837 100644 --- a/sound/soc/meson/axg-tdm-interface.c +++ b/sound/soc/meson/axg-tdm-interface.c @@ -12,6 +12,9 @@ #include "axg-tdm.h" +/* Maximum bit clock frequency according the datasheets */ +#define MAX_SCLK 100000000 /* Hz */ + enum { TDM_IFACE_PAD, TDM_IFACE_LOOPBACK, @@ -153,19 +156,27 @@ static int axg_tdm_iface_startup(struct snd_pcm_substream *substream, return -EINVAL; } - /* Apply component wide rate symmetry */ if (snd_soc_component_active(dai->component)) { + /* Apply component wide rate symmetry */ ret = snd_pcm_hw_constraint_single(substream->runtime, SNDRV_PCM_HW_PARAM_RATE, iface->rate); - if (ret < 0) { - dev_err(dai->dev, - "can't set iface rate constraint\n"); - return ret; - } + + } else { + /* Limit rate according to the slot number and width */ + unsigned int max_rate = + MAX_SCLK / (iface->slots * iface->slot_width); + ret = snd_pcm_hw_constraint_minmax(substream->runtime, + SNDRV_PCM_HW_PARAM_RATE, + 0, max_rate); } - return 0; + if (ret < 0) + dev_err(dai->dev, "can't set iface rate constraint\n"); + else + ret = 0; + + return ret; } static int axg_tdm_iface_set_stream(struct snd_pcm_substream *substream, -- cgit v1.2.3