/* SPDX-License-Identifier: GPL-2.0-only */ /* * Based on arch/arm/include/asm/assembler.h, arch/arm/mm/proc-macros.S * * Copyright (C) 1996-2000 Russell King * Copyright (C) 2012 ARM Ltd. */ #ifndef __ASSEMBLY__ #error "Only include this from assembly code" #endif #ifndef __ASM_ASSEMBLER_H #define __ASM_ASSEMBLER_H #include #include #include #include #include #include #include #include #include .macro save_and_disable_daif, flags mrs \flags, daif msr daifset, #0xf .endm .macro disable_daif msr daifset, #0xf .endm .macro enable_daif msr daifclr, #0xf .endm .macro restore_daif, flags:req msr daif, \flags .endm /* IRQ is the lowest priority flag, unconditionally unmask the rest. */ .macro enable_da_f msr daifclr, #(8 | 4 | 1) .endm /* * Save/restore interrupts. */ .macro save_and_disable_irq, flags mrs \flags, daif msr daifset, #2 .endm .macro restore_irq, flags msr daif, \flags .endm .macro enable_dbg msr daifclr, #8 .endm .macro disable_step_tsk, flgs, tmp tbz \flgs, #TIF_SINGLESTEP, 9990f mrs \tmp, mdscr_el1 bic \tmp, \tmp, #DBG_MDSCR_SS msr mdscr_el1, \tmp isb // Synchronise with enable_dbg 9990: .endm /* call with daif masked */ .macro enable_step_tsk, flgs, tmp tbz \flgs, #TIF_SINGLESTEP, 9990f mrs \tmp, mdscr_el1 orr \tmp, \tmp, #DBG_MDSCR_SS msr mdscr_el1, \tmp 9990: .endm /* * RAS Error Synchronization barrier */ .macro esb #ifdef CONFIG_ARM64_RAS_EXTN hint #16 #else nop #endif .endm /* * Value prediction barrier */ .macro csdb hint #20 .endm /* * Speculation barrier */ .macro sb alternative_if_not ARM64_HAS_SB dsb nsh isb alternative_else SB_BARRIER_INSN nop alternative_endif .endm /* * NOP sequence */ .macro nops, num .rept \num nop .endr .endm /* * Emit an entry into the exception table */ .macro _asm_extable, from, to .pushsection __ex_table, "a" .align 3 .long (\from - .), (\to - .) .popsection .endm #define USER(l, x...) \ 9999: x; \ _asm_extable 9999b, l /* * Register aliases. */ lr .req x30 // link register /* * Vector entry */ .macro ventry label .align 7 b \label .endm /* * Select code when configured for BE. */ #ifdef CONFIG_CPU_BIG_ENDIAN #define CPU_BE(code...) code #else #define CPU_BE(code...) #endif /* * Select code when configured for LE. */ #ifdef CONFIG_CPU_BIG_ENDIAN #define CPU_LE(code...) #else #define CPU_LE(code...) code #endif /* * Define a macro that constructs a 64-bit value by concatenating two * 32-bit registers. Note that on big endian systems the order of the * registers is swapped. */ #ifndef CONFIG_CPU_BIG_ENDIAN .macro regs_to_64, rd, lbits, hbits #else .macro regs_to_64, rd, hbits, lbits #endif orr \rd, \lbits, \hbits, lsl #32 .endm /* * Pseudo-ops for PC-relative adr/ldr/str , where * is within the range +/- 4 GB of the PC. */ /* * @dst: destination register (64 bit wide) * @sym: name of the symbol */ .macro adr_l, dst, sym adrp \dst, \sym add \dst, \dst, :lo12:\sym .endm /* * @dst: destination register (32 or 64 bit wide) * @sym: name of the symbol * @tmp: optional 64-bit scratch register to be used if is a * 32-bit wide register, in which case it cannot be used to hold * the address */ .macro ldr_l, dst, sym, tmp= .ifb \tmp adrp \dst, \sym ldr \dst, [\dst, :lo12:\sym] .else adrp \tmp, \sym ldr \dst, [\tmp, :lo12:\sym] .endif .endm /* * @src: source register (32 or 64 bit wide) * @sym: name of the symbol * @tmp: mandatory 64-bit scratch register to calculate the address * while needs to be preserved. */ .macro str_l, src, sym, tmp adrp \tmp, \sym str \src, [\tmp, :lo12:\sym] .endm /* * @dst: destination register */ #if defined(__KVM_NVHE_HYPERVISOR__) || defined(__KVM_VHE_HYPERVISOR__) .macro this_cpu_offset, dst mrs \dst, tpidr_el2 .endm #else .macro this_cpu_offset, dst alternative_if_not ARM64_HAS_VIRT_HOST_EXTN mrs \dst, tpidr_el1 alternative_else mrs \dst, tpidr_el2 alternative_endif .endm #endif /* * @dst: Result of per_cpu(sym, smp_processor_id()) (can be SP) * @sym: The name of the per-cpu variable * @tmp: scratch register */ .macro adr_this_cpu, dst, sym, tmp adrp \tmp, \sym add \dst, \tmp, #:lo12:\sym this_cpu_offset \tmp add \dst, \dst, \tmp .endm /* * @dst: Result of READ_ONCE(per_cpu(sym, smp_processor_id())) * @sym: The name of the per-cpu variable * @tmp: scratch register */ .macro ldr_this_cpu dst, sym, tmp adr_l \dst, \sym this_cpu_offset \tmp ldr \dst, [\dst, \tmp] .endm /* * vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm) */ .macro vma_vm_mm, rd, rn ldr \rd, [\rn, #VMA_VM_MM] .endm /* * read_ctr - read CTR_EL0. If the system has mismatched register fields, * provide the system wide safe value from arm64_ftr_reg_ctrel0.sys_val */ .macro read_ctr, reg alternative_if_not ARM64_MISMATCHED_CACHE_TYPE mrs \reg, ctr_el0 // read CTR nop alternative_else ldr_l \reg, arm64_ftr_reg_ctrel0 + ARM64_FTR_SYSVAL alternative_endif .endm /* * raw_dcache_line_size - get the minimum D-cache line size on this CPU * from the CTR register. */ .macro raw_dcache_line_size, reg, tmp mrs \tmp, ctr_el0 // read CTR ubfm \tmp, \tmp, #16, #19 // cache line size encoding mov \reg, #4 // bytes per word lsl \reg, \reg, \tmp // actual cache line size .endm /* * dcache_line_size - get the safe D-cache line size across all CPUs */ .macro dcache_line_size, reg, tmp read_ctr \tmp ubfm \tmp, \tmp, #16, #19 // cache line size encoding mov \reg, #4 // bytes per word lsl \reg, \reg, \tmp // actual cache line size .endm /* * raw_icache_line_size - get the minimum I-cache line size on this CPU * from the CTR register. */ .macro raw_icache_line_size, reg, tmp mrs \tmp, ctr_el0 // read CTR and \tmp, \tmp, #0xf // cache line size encoding mov \reg, #4 // bytes per word lsl \reg, \reg, \tmp // actual cache line size .endm /* * icache_line_size - get the safe I-cache line size across all CPUs */ .macro icache_line_size, reg, tmp read_ctr \tmp and \tmp, \tmp, #0xf // cache line size encoding mov \reg, #4 // bytes per word lsl \reg, \reg, \tmp // actual cache line size .endm /* * tcr_set_t0sz - update TCR.T0SZ so that we can load the ID map */ .macro tcr_set_t0sz, valreg, t0sz bfi \valreg, \t0sz, #TCR_T0SZ_OFFSET, #TCR_TxSZ_WIDTH .endm /* * tcr_set_t1sz - update TCR.T1SZ */ .macro tcr_set_t1sz, valreg, t1sz bfi \valreg, \t1sz, #TCR_T1SZ_OFFSET, #TCR_TxSZ_WIDTH .endm /* * tcr_compute_pa_size - set TCR.(I)PS to the highest supported * ID_AA64MMFR0_EL1.PARange value * * tcr: register with the TCR_ELx value to be updated * pos: IPS or PS bitfield position * tmp{0,1}: temporary registers */ .macro tcr_compute_pa_size, tcr, pos, tmp0, tmp1 mrs \tmp0, ID_AA64MMFR0_EL1 // Narrow PARange to fit the PS field in TCR_ELx ubfx \tmp0, \tmp0, #ID_AA64MMFR0_PARANGE_SHIFT, #3 mov \tmp1, #ID_AA64MMFR0_PARANGE_MAX cmp \tmp0, \tmp1 csel \tmp0, \tmp1, \tmp0, hi bfi \tcr, \tmp0, \pos, #3 .endm /* * Macro to perform a data cache maintenance for the interval * [kaddr, kaddr + size) * * op: operation passed to dc instruction * domain: domain used in dsb instruciton * kaddr: starting virtual address of the region * size: size of the region * Corrupts: kaddr, size, tmp1, tmp2 */ .macro __dcache_op_workaround_clean_cache, op, kaddr alternative_if_not ARM64_WORKAROUND_CLEAN_CACHE dc \op, \kaddr alternative_else dc civac, \kaddr alternative_endif .endm .macro dcache_by_line_op op, domain, kaddr, size, tmp1, tmp2 dcache_line_size \tmp1, \tmp2 add \size, \kaddr, \size sub \tmp2, \tmp1, #1 bic \kaddr, \kaddr, \tmp2 9998: .ifc \op, cvau __dcache_op_workaround_clean_cache \op, \kaddr .else .ifc \op, cvac __dcache_op_workaround_clean_cache \op, \kaddr .else .ifc \op, cvap sys 3, c7, c12, 1, \kaddr // dc cvap .else .ifc \op, cvadp sys 3, c7, c13, 1, \kaddr // dc cvadp .else dc \op, \kaddr .endif .endif .endif .endif add \kaddr, \kaddr, \tmp1 cmp \kaddr, \size b.lo 9998b dsb \domain .endm /* * Macro to perform an instruction cache maintenance for the interval * [start, end) * * start, end: virtual addresses describing the region * label: A label to branch to on user fault. * Corrupts: tmp1, tmp2 */ .macro invalidate_icache_by_line start, end, tmp1, tmp2, label icache_line_size \tmp1, \tmp2 sub \tmp2, \tmp1, #1 bic \tmp2, \start, \tmp2 9997: USER(\label, ic ivau, \tmp2) // invalidate I line PoU add \tmp2, \tmp2, \tmp1 cmp \tmp2, \end b.lo 9997b dsb ish isb .endm /* * reset_pmuserenr_el0 - reset PMUSERENR_EL0 if PMUv3 present */ .macro reset_pmuserenr_el0, tmpreg mrs \tmpreg, id_aa64dfr0_el1 sbfx \tmpreg, \tmpreg, #ID_AA64DFR0_PMUVER_SHIFT, #4 cmp \tmpreg, #1 // Skip if no PMU present b.lt 9000f msr pmuserenr_el0, xzr // Disable PMU access from EL0 9000: .endm /* * reset_amuserenr_el0 - reset AMUSERENR_EL0 if AMUv1 present */ .macro reset_amuserenr_el0, tmpreg mrs \tmpreg, id_aa64pfr0_el1 // Check ID_AA64PFR0_EL1 ubfx \tmpreg, \tmpreg, #ID_AA64PFR0_AMU_SHIFT, #4 cbz \tmpreg, .Lskip_\@ // Skip if no AMU present msr_s SYS_AMUSERENR_EL0, xzr // Disable AMU access from EL0 .Lskip_\@: .endm /* * copy_page - copy src to dest using temp registers t1-t8 */ .macro copy_page dest:req src:req t1:req t2:req t3:req t4:req t5:req t6:req t7:req t8:req 9998: ldp \t1, \t2, [\src] ldp \t3, \t4, [\src, #16] ldp \t5, \t6, [\src, #32] ldp \t7, \t8, [\src, #48] add \src, \src, #64 stnp \t1, \t2, [\dest] stnp \t3, \t4, [\dest, #16] stnp \t5, \t6, [\dest, #32] stnp \t7, \t8, [\dest, #48] add \dest, \dest, #64 tst \src, #(PAGE_SIZE - 1) b.ne 9998b .endm /* * Annotate a function as being unsuitable for kprobes. */ #ifdef CONFIG_KPROBES #define NOKPROBE(x) \ .pushsection "_kprobe_blacklist", "aw"; \ .quad x; \ .popsection; #else #define NOKPROBE(x) #endif #if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS) #define EXPORT_SYMBOL_NOKASAN(name) #else #define EXPORT_SYMBOL_NOKASAN(name) EXPORT_SYMBOL(name) #endif /* * Emit a 64-bit absolute little endian symbol reference in a way that * ensures that it will be resolved at build time, even when building a * PIE binary. This requires cooperation from the linker script, which * must emit the lo32/hi32 halves individually. */ .macro le64sym, sym .long \sym\()_lo32 .long \sym\()_hi32 .endm /* * mov_q - move an immediate constant into a 64-bit register using * between 2 and 4 movz/movk instructions (depending on the * magnitude and sign of the operand) */ .macro mov_q, reg, val .if (((\val) >> 31) == 0 || ((\val) >> 31) == 0x1ffffffff) movz \reg, :abs_g1_s:\val .else .if (((\val) >> 47) == 0 || ((\val) >> 47) == 0x1ffff) movz \reg, :abs_g2_s:\val .else movz \reg, :abs_g3:\val movk \reg, :abs_g2_nc:\val .endif movk \reg, :abs_g1_nc:\val .endif movk \reg, :abs_g0_nc:\val .endm /* * Return the current task_struct. */ .macro get_current_task, rd mrs \rd, sp_el0 .endm /* * Offset ttbr1 to allow for 48-bit kernel VAs set with 52-bit PTRS_PER_PGD. * orr is used as it can cover the immediate value (and is idempotent). * In future this may be nop'ed out when dealing with 52-bit kernel VAs. * ttbr: Value of ttbr to set, modified. */ .macro offset_ttbr1, ttbr, tmp #ifdef CONFIG_ARM64_VA_BITS_52 mrs_s \tmp, SYS_ID_AA64MMFR2_EL1 and \tmp, \tmp, #(0xf << ID_AA64MMFR2_LVA_SHIFT) cbnz \tmp, .Lskipoffs_\@ orr \ttbr, \ttbr, #TTBR1_BADDR_4852_OFFSET .Lskipoffs_\@ : #endif .endm /* * Perform the reverse of offset_ttbr1. * bic is used as it can cover the immediate value and, in future, won't need * to be nop'ed out when dealing with 52-bit kernel VAs. */ .macro restore_ttbr1, ttbr #ifdef CONFIG_ARM64_VA_BITS_52 bic \ttbr, \ttbr, #TTBR1_BADDR_4852_OFFSET #endif .endm /* * Arrange a physical address in a TTBR register, taking care of 52-bit * addresses. * * phys: physical address, preserved * ttbr: returns the TTBR value */ .macro phys_to_ttbr, ttbr, phys #ifdef CONFIG_ARM64_PA_BITS_52 orr \ttbr, \phys, \phys, lsr #46 and \ttbr, \ttbr, #TTBR_BADDR_MASK_52 #else mov \ttbr, \phys #endif .endm .macro phys_to_pte, pte, phys #ifdef CONFIG_ARM64_PA_BITS_52 /* * We assume \phys is 64K aligned and this is guaranteed by only * supporting this configuration with 64K pages. */ orr \pte, \phys, \phys, lsr #36 and \pte, \pte, #PTE_ADDR_MASK #else mov \pte, \phys #endif .endm .macro pte_to_phys, phys, pte #ifdef CONFIG_ARM64_PA_BITS_52 ubfiz \phys, \pte, #(48 - 16 - 12), #16 bfxil \phys, \pte, #16, #32 lsl \phys, \phys, #16 #else and \phys, \pte, #PTE_ADDR_MASK #endif .endm /* * tcr_clear_errata_bits - Clear TCR bits that trigger an errata on this CPU. */ .macro tcr_clear_errata_bits, tcr, tmp1, tmp2 #ifdef CONFIG_FUJITSU_ERRATUM_010001 mrs \tmp1, midr_el1 mov_q \tmp2, MIDR_FUJITSU_ERRATUM_010001_MASK and \tmp1, \tmp1, \tmp2 mov_q \tmp2, MIDR_FUJITSU_ERRATUM_010001 cmp \tmp1, \tmp2 b.ne 10f mov_q \tmp2, TCR_CLEAR_FUJITSU_ERRATUM_010001 bic \tcr, \tcr, \tmp2 10: #endif /* CONFIG_FUJITSU_ERRATUM_010001 */ .endm /** * Errata workaround prior to disable MMU. Insert an ISB immediately prior * to executing the MSR that will change SCTLR_ELn[M] from a value of 1 to 0. */ .macro pre_disable_mmu_workaround #ifdef CONFIG_QCOM_FALKOR_ERRATUM_E1041 isb #endif .endm /* * frame_push - Push @regcount callee saved registers to the stack, * starting at x19, as well as x29/x30, and set x29 to * the new value of sp. Add @extra bytes of stack space * for locals. */ .macro frame_push, regcount:req, extra __frame st, \regcount, \extra .endm /* * frame_pop - Pop the callee saved registers from the stack that were * pushed in the most recent call to frame_push, as well * as x29/x30 and any extra stack space that may have been * allocated. */ .macro frame_pop __frame ld .endm .macro __frame_regs, reg1, reg2, op, num .if .Lframe_regcount == \num \op\()r \reg1, [sp, #(\num + 1) * 8] .elseif .Lframe_regcount > \num \op\()p \reg1, \reg2, [sp, #(\num + 1) * 8] .endif .endm .macro __frame, op, regcount, extra=0 .ifc \op, st .if (\regcount) < 0 || (\regcount) > 10 .error "regcount should be in the range [0 ... 10]" .endif .if ((\extra) % 16) != 0 .error "extra should be a multiple of 16 bytes" .endif .ifdef .Lframe_regcount .if .Lframe_regcount != -1 .error "frame_push/frame_pop may not be nested" .endif .endif .set .Lframe_regcount, \regcount .set .Lframe_extra, \extra .set .Lframe_local_offset, ((\regcount + 3) / 2) * 16 stp x29, x30, [sp, #-.Lframe_local_offset - .Lframe_extra]! mov x29, sp .endif __frame_regs x19, x20, \op, 1 __frame_regs x21, x22, \op, 3 __frame_regs x23, x24, \op, 5 __frame_regs x25, x26, \op, 7 __frame_regs x27, x28, \op, 9 .ifc \op, ld .if .Lframe_regcount == -1 .error "frame_push/frame_pop may not be nested" .endif ldp x29, x30, [sp], #.Lframe_local_offset + .Lframe_extra .set .Lframe_regcount, -1 .endif .endm /* * Set SCTLR_ELx to the @reg value, and invalidate the local icache * in the process. This is called when setting the MMU on. */ .macro set_sctlr, sreg, reg msr \sreg, \reg isb /* * Invalidate the local I-cache so that any instructions fetched * speculatively from the PoC are discarded, since they may have * been dynamically patched at the PoU. */ ic iallu dsb nsh isb .endm .macro set_sctlr_el1, reg set_sctlr sctlr_el1, \reg .endm .macro set_sctlr_el2, reg set_sctlr sctlr_el2, \reg .endm /* * Check whether to yield to another runnable task from kernel mode NEON code * (which runs with preemption disabled). * * if_will_cond_yield_neon * // pre-yield patchup code * do_cond_yield_neon * // post-yield patchup code * endif_yield_neon