// SPDX-License-Identifier: GPL-2.0 /* * Driver for the Texas Instruments DS90UB913 video serializer * * Based on a driver from Luca Ceresoli * * Copyright (c) 2019 Luca Ceresoli * Copyright (c) 2023 Tomi Valkeinen */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define UB913_PAD_SINK 0 #define UB913_PAD_SOURCE 1 /* * UB913 has 4 gpios, but gpios 3 and 4 are reserved for external oscillator * mode. Thus we only support 2 gpios for now. */ #define UB913_NUM_GPIOS 2 #define UB913_REG_RESET_CTL 0x01 #define UB913_REG_RESET_CTL_DIGITAL_RESET_1 BIT(1) #define UB913_REG_RESET_CTL_DIGITAL_RESET_0 BIT(0) #define UB913_REG_GENERAL_CFG 0x03 #define UB913_REG_GENERAL_CFG_CRC_ERR_RESET BIT(5) #define UB913_REG_GENERAL_CFG_PCLK_RISING BIT(0) #define UB913_REG_MODE_SEL 0x05 #define UB913_REG_MODE_SEL_MODE_OVERRIDE BIT(5) #define UB913_REG_MODE_SEL_MODE_UP_TO_DATE BIT(4) #define UB913_REG_MODE_SEL_MODE_MASK GENMASK(3, 0) #define UB913_REG_CRC_ERRORS_LSB 0x0a #define UB913_REG_CRC_ERRORS_MSB 0x0b #define UB913_REG_GENERAL_STATUS 0x0c #define UB913_REG_GPIO_CFG(n) (0x0d + (n)) #define UB913_REG_GPIO_CFG_ENABLE(n) BIT(0 + (n) * 4) #define UB913_REG_GPIO_CFG_DIR_INPUT(n) BIT(1 + (n) * 4) #define UB913_REG_GPIO_CFG_REMOTE_EN(n) BIT(2 + (n) * 4) #define UB913_REG_GPIO_CFG_OUT_VAL(n) BIT(3 + (n) * 4) #define UB913_REG_GPIO_CFG_MASK(n) (0xf << ((n) * 4)) #define UB913_REG_SCL_HIGH_TIME 0x11 #define UB913_REG_SCL_LOW_TIME 0x12 #define UB913_REG_PLL_OVR 0x35 struct ub913_data { struct i2c_client *client; struct regmap *regmap; struct clk *clkin; struct gpio_chip gpio_chip; struct v4l2_subdev sd; struct media_pad pads[2]; struct v4l2_async_notifier notifier; struct v4l2_subdev *source_sd; u16 source_sd_pad; u64 enabled_source_streams; struct clk_hw *clkout_clk_hw; struct ds90ub9xx_platform_data *plat_data; bool pclk_polarity_rising; }; static inline struct ub913_data *sd_to_ub913(struct v4l2_subdev *sd) { return container_of(sd, struct ub913_data, sd); } struct ub913_format_info { u32 incode; u32 outcode; }; static const struct ub913_format_info ub913_formats[] = { /* Only RAW10 with 8-bit payload is supported at the moment */ { .incode = MEDIA_BUS_FMT_YUYV8_2X8, .outcode = MEDIA_BUS_FMT_YUYV8_1X16 }, { .incode = MEDIA_BUS_FMT_UYVY8_2X8, .outcode = MEDIA_BUS_FMT_UYVY8_1X16 }, { .incode = MEDIA_BUS_FMT_VYUY8_2X8, .outcode = MEDIA_BUS_FMT_VYUY8_1X16 }, { .incode = MEDIA_BUS_FMT_YVYU8_2X8, .outcode = MEDIA_BUS_FMT_YVYU8_1X16 }, }; static const struct ub913_format_info *ub913_find_format(u32 incode) { unsigned int i; for (i = 0; i < ARRAY_SIZE(ub913_formats); i++) { if (ub913_formats[i].incode == incode) return &ub913_formats[i]; } return NULL; } static int ub913_read(const struct ub913_data *priv, u8 reg, u8 *val) { unsigned int v; int ret; ret = regmap_read(priv->regmap, reg, &v); if (ret < 0) { dev_err(&priv->client->dev, "Cannot read register 0x%02x: %d!\n", reg, ret); return ret; } *val = v; return 0; } static int ub913_write(const struct ub913_data *priv, u8 reg, u8 val) { int ret; ret = regmap_write(priv->regmap, reg, val); if (ret < 0) dev_err(&priv->client->dev, "Cannot write register 0x%02x: %d!\n", reg, ret); return ret; } /* * GPIO chip */ static int ub913_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) { return GPIO_LINE_DIRECTION_OUT; } static int ub913_gpio_direction_out(struct gpio_chip *gc, unsigned int offset, int value) { struct ub913_data *priv = gpiochip_get_data(gc); unsigned int reg_idx = offset / 2; unsigned int field_idx = offset % 2; return regmap_update_bits(priv->regmap, UB913_REG_GPIO_CFG(reg_idx), UB913_REG_GPIO_CFG_MASK(field_idx), UB913_REG_GPIO_CFG_ENABLE(field_idx) | (value ? UB913_REG_GPIO_CFG_OUT_VAL(field_idx) : 0)); } static void ub913_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) { ub913_gpio_direction_out(gc, offset, value); } static int ub913_gpio_of_xlate(struct gpio_chip *gc, const struct of_phandle_args *gpiospec, u32 *flags) { if (flags) *flags = gpiospec->args[1]; return gpiospec->args[0]; } static int ub913_gpiochip_probe(struct ub913_data *priv) { struct device *dev = &priv->client->dev; struct gpio_chip *gc = &priv->gpio_chip; int ret; /* Initialize GPIOs 0 and 1 to local control, tri-state */ ub913_write(priv, UB913_REG_GPIO_CFG(0), 0); gc->label = dev_name(dev); gc->parent = dev; gc->owner = THIS_MODULE; gc->base = -1; gc->can_sleep = true; gc->ngpio = UB913_NUM_GPIOS; gc->get_direction = ub913_gpio_get_direction; gc->direction_output = ub913_gpio_direction_out; gc->set = ub913_gpio_set; gc->of_xlate = ub913_gpio_of_xlate; gc->of_gpio_n_cells = 2; ret = gpiochip_add_data(gc, priv); if (ret) { dev_err(dev, "Failed to add GPIOs: %d\n", ret); return ret; } return 0; } static void ub913_gpiochip_remove(struct ub913_data *priv) { gpiochip_remove(&priv->gpio_chip); } static const struct regmap_config ub913_regmap_config = { .name = "ds90ub913", .reg_bits = 8, .val_bits = 8, .reg_format_endian = REGMAP_ENDIAN_DEFAULT, .val_format_endian = REGMAP_ENDIAN_DEFAULT, }; /* * V4L2 */ static int ub913_enable_streams(struct v4l2_subdev *sd, struct v4l2_subdev_state *state, u32 pad, u64 streams_mask) { struct ub913_data *priv = sd_to_ub913(sd); u64 sink_streams; int ret; sink_streams = v4l2_subdev_state_xlate_streams(state, UB913_PAD_SOURCE, UB913_PAD_SINK, &streams_mask); ret = v4l2_subdev_enable_streams(priv->source_sd, priv->source_sd_pad, sink_streams); if (ret) return ret; priv->enabled_source_streams |= streams_mask; return 0; } static int ub913_disable_streams(struct v4l2_subdev *sd, struct v4l2_subdev_state *state, u32 pad, u64 streams_mask) { struct ub913_data *priv = sd_to_ub913(sd); u64 sink_streams; int ret; sink_streams = v4l2_subdev_state_xlate_streams(state, UB913_PAD_SOURCE, UB913_PAD_SINK, &streams_mask); ret = v4l2_subdev_disable_streams(priv->source_sd, priv->source_sd_pad, sink_streams); if (ret) return ret; priv->enabled_source_streams &= ~streams_mask; return 0; } static int _ub913_set_routing(struct v4l2_subdev *sd, struct v4l2_subdev_state *state, struct v4l2_subdev_krouting *routing) { static const struct v4l2_mbus_framefmt in_format = { .width = 640, .height = 480, .code = MEDIA_BUS_FMT_UYVY8_2X8, .field = V4L2_FIELD_NONE, .colorspace = V4L2_COLORSPACE_SRGB, .ycbcr_enc = V4L2_YCBCR_ENC_601, .quantization = V4L2_QUANTIZATION_LIM_RANGE, .xfer_func = V4L2_XFER_FUNC_SRGB, }; static const struct v4l2_mbus_framefmt out_format = { .width = 640, .height = 480, .code = MEDIA_BUS_FMT_UYVY8_1X16, .field = V4L2_FIELD_NONE, .colorspace = V4L2_COLORSPACE_SRGB, .ycbcr_enc = V4L2_YCBCR_ENC_601, .quantization = V4L2_QUANTIZATION_LIM_RANGE, .xfer_func = V4L2_XFER_FUNC_SRGB, }; struct v4l2_subdev_stream_configs *stream_configs; unsigned int i; int ret; /* * Note: we can only support up to V4L2_FRAME_DESC_ENTRY_MAX, until * frame desc is made dynamically allocated. */ if (routing->num_routes > V4L2_FRAME_DESC_ENTRY_MAX) return -EINVAL; ret = v4l2_subdev_routing_validate(sd, routing, V4L2_SUBDEV_ROUTING_ONLY_1_TO_1); if (ret) return ret; ret = v4l2_subdev_set_routing(sd, state, routing); if (ret) return ret; stream_configs = &state->stream_configs; for (i = 0; i < stream_configs->num_configs; i++) { if (stream_configs->configs[i].pad == UB913_PAD_SINK) stream_configs->configs[i].fmt = in_format; else stream_configs->configs[i].fmt = out_format; } return 0; } static int ub913_set_routing(struct v4l2_subdev *sd, struct v4l2_subdev_state *state, enum v4l2_subdev_format_whence which, struct v4l2_subdev_krouting *routing) { struct ub913_data *priv = sd_to_ub913(sd); if (which == V4L2_SUBDEV_FORMAT_ACTIVE && priv->enabled_source_streams) return -EBUSY; return _ub913_set_routing(sd, state, routing); } static int ub913_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, struct v4l2_mbus_frame_desc *fd) { struct ub913_data *priv = sd_to_ub913(sd); const struct v4l2_subdev_krouting *routing; struct v4l2_mbus_frame_desc source_fd; struct v4l2_subdev_route *route; struct v4l2_subdev_state *state; int ret; if (pad != UB913_PAD_SOURCE) return -EINVAL; ret = v4l2_subdev_call(priv->source_sd, pad, get_frame_desc, priv->source_sd_pad, &source_fd); if (ret) return ret; fd->type = V4L2_MBUS_FRAME_DESC_TYPE_PARALLEL; state = v4l2_subdev_lock_and_get_active_state(sd); routing = &state->routing; for_each_active_route(routing, route) { unsigned int i; if (route->source_pad != pad) continue; for (i = 0; i < source_fd.num_entries; i++) { if (source_fd.entry[i].stream == route->sink_stream) break; } if (i == source_fd.num_entries) { dev_err(&priv->client->dev, "Failed to find stream from source frame desc\n"); ret = -EPIPE; goto out_unlock; } fd->entry[fd->num_entries].stream = route->source_stream; fd->entry[fd->num_entries].flags = source_fd.entry[i].flags; fd->entry[fd->num_entries].length = source_fd.entry[i].length; fd->entry[fd->num_entries].pixelcode = source_fd.entry[i].pixelcode; fd->num_entries++; } out_unlock: v4l2_subdev_unlock_state(state); return ret; } static int ub913_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_state *state, struct v4l2_subdev_format *format) { struct ub913_data *priv = sd_to_ub913(sd); struct v4l2_mbus_framefmt *fmt; const struct ub913_format_info *finfo; if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE && priv->enabled_source_streams) return -EBUSY; /* Source format is fully defined by the sink format, so not settable */ if (format->pad == UB913_PAD_SOURCE) return v4l2_subdev_get_fmt(sd, state, format); finfo = ub913_find_format(format->format.code); if (!finfo) { finfo = &ub913_formats[0]; format->format.code = finfo->incode; } /* Set sink format */ fmt = v4l2_subdev_state_get_format(state, format->pad, format->stream); if (!fmt) return -EINVAL; *fmt = format->format; /* Propagate to source format, and adjust the mbus code */ fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad, format->stream); if (!fmt) return -EINVAL; format->format.code = finfo->outcode; *fmt = format->format; return 0; } static int ub913_init_state(struct v4l2_subdev *sd, struct v4l2_subdev_state *state) { struct v4l2_subdev_route routes[] = { { .sink_pad = UB913_PAD_SINK, .sink_stream = 0, .source_pad = UB913_PAD_SOURCE, .source_stream = 0, .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE, }, }; struct v4l2_subdev_krouting routing = { .num_routes = ARRAY_SIZE(routes), .routes = routes, }; return _ub913_set_routing(sd, state, &routing); } static int ub913_log_status(struct v4l2_subdev *sd) { struct ub913_data *priv = sd_to_ub913(sd); struct device *dev = &priv->client->dev; u8 v = 0, v1 = 0, v2 = 0; ub913_read(priv, UB913_REG_MODE_SEL, &v); dev_info(dev, "MODE_SEL %#02x\n", v); ub913_read(priv, UB913_REG_CRC_ERRORS_LSB, &v1); ub913_read(priv, UB913_REG_CRC_ERRORS_MSB, &v2); dev_info(dev, "CRC errors %u\n", v1 | (v2 << 8)); /* clear CRC errors */ ub913_read(priv, UB913_REG_GENERAL_CFG, &v); ub913_write(priv, UB913_REG_GENERAL_CFG, v | UB913_REG_GENERAL_CFG_CRC_ERR_RESET); ub913_write(priv, UB913_REG_GENERAL_CFG, v); ub913_read(priv, UB913_REG_GENERAL_STATUS, &v); dev_info(dev, "GENERAL_STATUS %#02x\n", v); ub913_read(priv, UB913_REG_PLL_OVR, &v); dev_info(dev, "PLL_OVR %#02x\n", v); return 0; } static const struct v4l2_subdev_core_ops ub913_subdev_core_ops = { .log_status = ub913_log_status, }; static const struct v4l2_subdev_pad_ops ub913_pad_ops = { .enable_streams = ub913_enable_streams, .disable_streams = ub913_disable_streams, .set_routing = ub913_set_routing, .get_frame_desc = ub913_get_frame_desc, .get_fmt = v4l2_subdev_get_fmt, .set_fmt = ub913_set_fmt, }; static const struct v4l2_subdev_ops ub913_subdev_ops = { .core = &ub913_subdev_core_ops, .pad = &ub913_pad_ops, }; static const struct v4l2_subdev_internal_ops ub913_internal_ops = { .init_state = ub913_init_state, }; static const struct media_entity_operations ub913_entity_ops = { .link_validate = v4l2_subdev_link_validate, }; static int ub913_notify_bound(struct v4l2_async_notifier *notifier, struct v4l2_subdev *source_subdev, struct v4l2_async_connection *asd) { struct ub913_data *priv = sd_to_ub913(notifier->sd); struct device *dev = &priv->client->dev; int ret; ret = media_entity_get_fwnode_pad(&source_subdev->entity, source_subdev->fwnode, MEDIA_PAD_FL_SOURCE); if (ret < 0) { dev_err(dev, "Failed to find pad for %s\n", source_subdev->name); return ret; } priv->source_sd = source_subdev; priv->source_sd_pad = ret; ret = media_create_pad_link(&source_subdev->entity, priv->source_sd_pad, &priv->sd.entity, UB913_PAD_SINK, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); if (ret) { dev_err(dev, "Unable to link %s:%u -> %s:0\n", source_subdev->name, priv->source_sd_pad, priv->sd.name); return ret; } return 0; } static const struct v4l2_async_notifier_operations ub913_notify_ops = { .bound = ub913_notify_bound, }; static int ub913_v4l2_notifier_register(struct ub913_data *priv) { struct device *dev = &priv->client->dev; struct v4l2_async_connection *asd; struct fwnode_handle *ep_fwnode; int ret; ep_fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), UB913_PAD_SINK, 0, 0); if (!ep_fwnode) { dev_err(dev, "No graph endpoint\n"); return -ENODEV; } v4l2_async_subdev_nf_init(&priv->notifier, &priv->sd); asd = v4l2_async_nf_add_fwnode_remote(&priv->notifier, ep_fwnode, struct v4l2_async_connection); fwnode_handle_put(ep_fwnode); if (IS_ERR(asd)) { dev_err(dev, "Failed to add subdev: %ld", PTR_ERR(asd)); v4l2_async_nf_cleanup(&priv->notifier); return PTR_ERR(asd); } priv->notifier.ops = &ub913_notify_ops; ret = v4l2_async_nf_register(&priv->notifier); if (ret) { dev_err(dev, "Failed to register subdev_notifier"); v4l2_async_nf_cleanup(&priv->notifier); return ret; } return 0; } static void ub913_v4l2_nf_unregister(struct ub913_data *priv) { v4l2_async_nf_unregister(&priv->notifier); v4l2_async_nf_cleanup(&priv->notifier); } static int ub913_register_clkout(struct ub913_data *priv) { struct device *dev = &priv->client->dev; const char *name; int ret; name = kasprintf(GFP_KERNEL, "ds90ub913.%s.clk_out", dev_name(dev)); if (!name) return -ENOMEM; priv->clkout_clk_hw = devm_clk_hw_register_fixed_factor(dev, name, __clk_get_name(priv->clkin), 0, 1, 2); kfree(name); if (IS_ERR(priv->clkout_clk_hw)) return dev_err_probe(dev, PTR_ERR(priv->clkout_clk_hw), "Cannot register clkout hw\n"); ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, priv->clkout_clk_hw); if (ret) return dev_err_probe(dev, ret, "Cannot add OF clock provider\n"); return 0; } static int ub913_i2c_master_init(struct ub913_data *priv) { /* i2c fast mode */ u32 scl_high = 600 + 300; /* high period + rise time, ns */ u32 scl_low = 1300 + 300; /* low period + fall time, ns */ unsigned long ref; int ret; ref = clk_get_rate(priv->clkin) / 2; scl_high = div64_u64((u64)scl_high * ref, 1000000000); scl_low = div64_u64((u64)scl_low * ref, 1000000000); ret = ub913_write(priv, UB913_REG_SCL_HIGH_TIME, scl_high); if (ret) return ret; ret = ub913_write(priv, UB913_REG_SCL_LOW_TIME, scl_low); if (ret) return ret; return 0; } static int ub913_add_i2c_adapter(struct ub913_data *priv) { struct device *dev = &priv->client->dev; struct fwnode_handle *i2c_handle; int ret; i2c_handle = device_get_named_child_node(dev, "i2c"); if (!i2c_handle) return 0; ret = i2c_atr_add_adapter(priv->plat_data->atr, priv->plat_data->port, dev, i2c_handle); fwnode_handle_put(i2c_handle); if (ret) return ret; return 0; } static int ub913_parse_dt(struct ub913_data *priv) { struct device *dev = &priv->client->dev; struct v4l2_fwnode_endpoint vep = { .bus_type = V4L2_MBUS_PARALLEL, }; struct fwnode_handle *ep_fwnode; int ret; ep_fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), UB913_PAD_SINK, 0, 0); if (!ep_fwnode) return dev_err_probe(dev, -ENOENT, "No sink endpoint\n"); ret = v4l2_fwnode_endpoint_parse(ep_fwnode, &vep); fwnode_handle_put(ep_fwnode); if (ret) return dev_err_probe(dev, ret, "failed to parse sink endpoint data\n"); if (vep.bus.parallel.flags & V4L2_MBUS_PCLK_SAMPLE_RISING) priv->pclk_polarity_rising = true; else if (vep.bus.parallel.flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) priv->pclk_polarity_rising = false; else return dev_err_probe(dev, -EINVAL, "bad value for 'pclk-sample'\n"); return 0; } static int ub913_hw_init(struct ub913_data *priv) { struct device *dev = &priv->client->dev; bool mode_override; u8 mode; int ret; u8 v; ret = ub913_read(priv, UB913_REG_MODE_SEL, &v); if (ret) return ret; if (!(v & UB913_REG_MODE_SEL_MODE_UP_TO_DATE)) return dev_err_probe(dev, -ENODEV, "Mode value not stabilized\n"); mode_override = v & UB913_REG_MODE_SEL_MODE_OVERRIDE; mode = v & UB913_REG_MODE_SEL_MODE_MASK; dev_dbg(dev, "mode from %s: %#x\n", mode_override ? "reg" : "deserializer", mode); ret = ub913_i2c_master_init(priv); if (ret) return dev_err_probe(dev, ret, "i2c master init failed\n"); ub913_read(priv, UB913_REG_GENERAL_CFG, &v); v &= ~UB913_REG_GENERAL_CFG_PCLK_RISING; v |= priv->pclk_polarity_rising ? UB913_REG_GENERAL_CFG_PCLK_RISING : 0; ub913_write(priv, UB913_REG_GENERAL_CFG, v); return 0; } static int ub913_subdev_init(struct ub913_data *priv) { struct device *dev = &priv->client->dev; int ret; v4l2_i2c_subdev_init(&priv->sd, priv->client, &ub913_subdev_ops); priv->sd.internal_ops = &ub913_internal_ops; priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_STREAMS; priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; priv->sd.entity.ops = &ub913_entity_ops; priv->pads[0].flags = MEDIA_PAD_FL_SINK; priv->pads[1].flags = MEDIA_PAD_FL_SOURCE; ret = media_entity_pads_init(&priv->sd.entity, 2, priv->pads); if (ret) return dev_err_probe(dev, ret, "Failed to init pads\n"); ret = v4l2_subdev_init_finalize(&priv->sd); if (ret) goto err_entity_cleanup; ret = ub913_v4l2_notifier_register(priv); if (ret) { dev_err_probe(dev, ret, "v4l2 subdev notifier register failed\n"); goto err_subdev_cleanup; } ret = v4l2_async_register_subdev(&priv->sd); if (ret) { dev_err_probe(dev, ret, "v4l2_async_register_subdev error\n"); goto err_unreg_notif; } return 0; err_unreg_notif: ub913_v4l2_nf_unregister(priv); err_subdev_cleanup: v4l2_subdev_cleanup(&priv->sd); err_entity_cleanup: media_entity_cleanup(&priv->sd.entity); return ret; } static void ub913_subdev_uninit(struct ub913_data *priv) { v4l2_async_unregister_subdev(&priv->sd); ub913_v4l2_nf_unregister(priv); v4l2_subdev_cleanup(&priv->sd); fwnode_handle_put(priv->sd.fwnode); media_entity_cleanup(&priv->sd.entity); } static int ub913_probe(struct i2c_client *client) { struct device *dev = &client->dev; struct ub913_data *priv; int ret; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; priv->client = client; priv->plat_data = dev_get_platdata(&client->dev); if (!priv->plat_data) return dev_err_probe(dev, -ENODEV, "Platform data missing\n"); priv->regmap = devm_regmap_init_i2c(client, &ub913_regmap_config); if (IS_ERR(priv->regmap)) return dev_err_probe(dev, PTR_ERR(priv->regmap), "Failed to init regmap\n"); /* * ub913 can also work without ext clock, but that is not supported by * the driver yet. */ priv->clkin = devm_clk_get(dev, "clkin"); if (IS_ERR(priv->clkin)) return dev_err_probe(dev, PTR_ERR(priv->clkin), "Cannot get CLKIN\n"); ret = ub913_parse_dt(priv); if (ret) return ret; ret = ub913_hw_init(priv); if (ret) return ret; ret = ub913_gpiochip_probe(priv); if (ret) return dev_err_probe(dev, ret, "Failed to init gpiochip\n"); ret = ub913_register_clkout(priv); if (ret) { dev_err_probe(dev, ret, "Failed to register clkout\n"); goto err_gpiochip_remove; } ret = ub913_subdev_init(priv); if (ret) goto err_gpiochip_remove; ret = ub913_add_i2c_adapter(priv); if (ret) { dev_err_probe(dev, ret, "failed to add remote i2c adapter\n"); goto err_subdev_uninit; } return 0; err_subdev_uninit: ub913_subdev_uninit(priv); err_gpiochip_remove: ub913_gpiochip_remove(priv); return ret; } static void ub913_remove(struct i2c_client *client) { struct v4l2_subdev *sd = i2c_get_clientdata(client); struct ub913_data *priv = sd_to_ub913(sd); i2c_atr_del_adapter(priv->plat_data->atr, priv->plat_data->port); ub913_subdev_uninit(priv); ub913_gpiochip_remove(priv); } static const struct i2c_device_id ub913_id[] = { { "ds90ub913a-q1", 0 }, {} }; MODULE_DEVICE_TABLE(i2c, ub913_id); static const struct of_device_id ub913_dt_ids[] = { { .compatible = "ti,ds90ub913a-q1" }, {} }; MODULE_DEVICE_TABLE(of, ub913_dt_ids); static struct i2c_driver ds90ub913_driver = { .probe = ub913_probe, .remove = ub913_remove, .id_table = ub913_id, .driver = { .name = "ds90ub913a", .of_match_table = ub913_dt_ids, }, }; module_i2c_driver(ds90ub913_driver); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Texas Instruments DS90UB913 FPD-Link III Serializer Driver"); MODULE_AUTHOR("Luca Ceresoli "); MODULE_AUTHOR("Tomi Valkeinen "); MODULE_IMPORT_NS(I2C_ATR);