// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2023, Linaro Limited */ #include #include #include #include #include #include #include #include #include #define USB_PHY_UTMI_CTRL0 (0x3c) #define SLEEPM BIT(0) #define OPMODE_MASK GENMASK(4, 3) #define OPMODE_NONDRIVING BIT(3) #define USB_PHY_UTMI_CTRL5 (0x50) #define POR BIT(1) #define USB_PHY_HS_PHY_CTRL_COMMON0 (0x54) #define PHY_ENABLE BIT(0) #define SIDDQ_SEL BIT(1) #define SIDDQ BIT(2) #define RETENABLEN BIT(3) #define FSEL_MASK GENMASK(6, 4) #define FSEL_19_2_MHZ_VAL (0x0) #define FSEL_38_4_MHZ_VAL (0x4) #define USB_PHY_CFG_CTRL_1 (0x58) #define PHY_CFG_PLL_CPBIAS_CNTRL_MASK GENMASK(7, 1) #define USB_PHY_CFG_CTRL_2 (0x5c) #define PHY_CFG_PLL_FB_DIV_7_0_MASK GENMASK(7, 0) #define DIV_7_0_19_2_MHZ_VAL (0x90) #define DIV_7_0_38_4_MHZ_VAL (0xc8) #define USB_PHY_CFG_CTRL_3 (0x60) #define PHY_CFG_PLL_FB_DIV_11_8_MASK GENMASK(3, 0) #define DIV_11_8_19_2_MHZ_VAL (0x1) #define DIV_11_8_38_4_MHZ_VAL (0x0) #define PHY_CFG_PLL_REF_DIV GENMASK(7, 4) #define PLL_REF_DIV_VAL (0x0) #define USB_PHY_HS_PHY_CTRL2 (0x64) #define VBUSVLDEXT0 BIT(0) #define USB2_SUSPEND_N BIT(2) #define USB2_SUSPEND_N_SEL BIT(3) #define VBUS_DET_EXT_SEL BIT(4) #define USB_PHY_CFG_CTRL_4 (0x68) #define PHY_CFG_PLL_GMP_CNTRL_MASK GENMASK(1, 0) #define PHY_CFG_PLL_INT_CNTRL_MASK GENMASK(7, 2) #define USB_PHY_CFG_CTRL_5 (0x6c) #define PHY_CFG_PLL_PROP_CNTRL_MASK GENMASK(4, 0) #define PHY_CFG_PLL_VREF_TUNE_MASK GENMASK(7, 6) #define USB_PHY_CFG_CTRL_6 (0x70) #define PHY_CFG_PLL_VCO_CNTRL_MASK GENMASK(2, 0) #define USB_PHY_CFG_CTRL_7 (0x74) #define USB_PHY_CFG_CTRL_8 (0x78) #define PHY_CFG_TX_FSLS_VREF_TUNE_MASK GENMASK(1, 0) #define PHY_CFG_TX_FSLS_VREG_BYPASS BIT(2) #define PHY_CFG_TX_HS_VREF_TUNE_MASK GENMASK(5, 3) #define PHY_CFG_TX_HS_XV_TUNE_MASK GENMASK(7, 6) #define USB_PHY_CFG_CTRL_9 (0x7c) #define PHY_CFG_TX_PREEMP_TUNE_MASK GENMASK(2, 0) #define PHY_CFG_TX_RES_TUNE_MASK GENMASK(4, 3) #define PHY_CFG_TX_RISE_TUNE_MASK GENMASK(6, 5) #define PHY_CFG_RCAL_BYPASS BIT(7) #define USB_PHY_CFG_CTRL_10 (0x80) #define USB_PHY_CFG0 (0x94) #define DATAPATH_CTRL_OVERRIDE_EN BIT(0) #define CMN_CTRL_OVERRIDE_EN BIT(1) #define UTMI_PHY_CMN_CTRL0 (0x98) #define TESTBURNIN BIT(6) #define USB_PHY_FSEL_SEL (0xb8) #define FSEL_SEL BIT(0) #define USB_PHY_APB_ACCESS_CMD (0x130) #define RW_ACCESS BIT(0) #define APB_START_CMD BIT(1) #define APB_LOGIC_RESET BIT(2) #define USB_PHY_APB_ACCESS_STATUS (0x134) #define ACCESS_DONE BIT(0) #define TIMED_OUT BIT(1) #define ACCESS_ERROR BIT(2) #define ACCESS_IN_PROGRESS BIT(3) #define USB_PHY_APB_ADDRESS (0x138) #define APB_REG_ADDR_MASK GENMASK(7, 0) #define USB_PHY_APB_WRDATA_LSB (0x13c) #define APB_REG_WRDATA_7_0_MASK GENMASK(3, 0) #define USB_PHY_APB_WRDATA_MSB (0x140) #define APB_REG_WRDATA_15_8_MASK GENMASK(7, 4) #define USB_PHY_APB_RDDATA_LSB (0x144) #define APB_REG_RDDATA_7_0_MASK GENMASK(3, 0) #define USB_PHY_APB_RDDATA_MSB (0x148) #define APB_REG_RDDATA_15_8_MASK GENMASK(7, 4) static const char * const eusb2_hsphy_vreg_names[] = { "vdd", "vdda12", }; #define EUSB2_NUM_VREGS ARRAY_SIZE(eusb2_hsphy_vreg_names) struct qcom_snps_eusb2_hsphy { struct phy *phy; void __iomem *base; struct clk *ref_clk; struct reset_control *phy_reset; struct regulator_bulk_data vregs[EUSB2_NUM_VREGS]; enum phy_mode mode; struct phy *repeater; }; static int qcom_snps_eusb2_hsphy_set_mode(struct phy *p, enum phy_mode mode, int submode) { struct qcom_snps_eusb2_hsphy *phy = phy_get_drvdata(p); phy->mode = mode; return phy_set_mode_ext(phy->repeater, mode, submode); } static void qcom_snps_eusb2_hsphy_write_mask(void __iomem *base, u32 offset, u32 mask, u32 val) { u32 reg; reg = readl_relaxed(base + offset); reg &= ~mask; reg |= val & mask; writel_relaxed(reg, base + offset); /* Ensure above write is completed */ readl_relaxed(base + offset); } static void qcom_eusb2_default_parameters(struct qcom_snps_eusb2_hsphy *phy) { /* default parameters: tx pre-emphasis */ qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_9, PHY_CFG_TX_PREEMP_TUNE_MASK, FIELD_PREP(PHY_CFG_TX_PREEMP_TUNE_MASK, 0)); /* tx rise/fall time */ qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_9, PHY_CFG_TX_RISE_TUNE_MASK, FIELD_PREP(PHY_CFG_TX_RISE_TUNE_MASK, 0x2)); /* source impedance adjustment */ qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_9, PHY_CFG_TX_RES_TUNE_MASK, FIELD_PREP(PHY_CFG_TX_RES_TUNE_MASK, 0x1)); /* dc voltage level adjustement */ qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_8, PHY_CFG_TX_HS_VREF_TUNE_MASK, FIELD_PREP(PHY_CFG_TX_HS_VREF_TUNE_MASK, 0x3)); /* transmitter HS crossover adjustement */ qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_8, PHY_CFG_TX_HS_XV_TUNE_MASK, FIELD_PREP(PHY_CFG_TX_HS_XV_TUNE_MASK, 0x0)); } static int qcom_eusb2_ref_clk_init(struct qcom_snps_eusb2_hsphy *phy) { unsigned long ref_clk_freq = clk_get_rate(phy->ref_clk); switch (ref_clk_freq) { case 19200000: qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL_COMMON0, FSEL_MASK, FIELD_PREP(FSEL_MASK, FSEL_19_2_MHZ_VAL)); qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_2, PHY_CFG_PLL_FB_DIV_7_0_MASK, DIV_7_0_19_2_MHZ_VAL); qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_3, PHY_CFG_PLL_FB_DIV_11_8_MASK, DIV_11_8_19_2_MHZ_VAL); break; case 38400000: qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL_COMMON0, FSEL_MASK, FIELD_PREP(FSEL_MASK, FSEL_38_4_MHZ_VAL)); qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_2, PHY_CFG_PLL_FB_DIV_7_0_MASK, DIV_7_0_38_4_MHZ_VAL); qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_3, PHY_CFG_PLL_FB_DIV_11_8_MASK, DIV_11_8_38_4_MHZ_VAL); break; default: dev_err(&phy->phy->dev, "unsupported ref_clk_freq:%lu\n", ref_clk_freq); return -EINVAL; } qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_3, PHY_CFG_PLL_REF_DIV, PLL_REF_DIV_VAL); return 0; } static int qcom_snps_eusb2_hsphy_init(struct phy *p) { struct qcom_snps_eusb2_hsphy *phy = phy_get_drvdata(p); int ret; ret = regulator_bulk_enable(ARRAY_SIZE(phy->vregs), phy->vregs); if (ret) return ret; ret = phy_init(phy->repeater); if (ret) { dev_err(&p->dev, "repeater init failed. %d\n", ret); goto disable_vreg; } ret = clk_prepare_enable(phy->ref_clk); if (ret) { dev_err(&p->dev, "failed to enable ref clock, %d\n", ret); goto disable_vreg; } ret = reset_control_assert(phy->phy_reset); if (ret) { dev_err(&p->dev, "failed to assert phy_reset, %d\n", ret); goto disable_ref_clk; } usleep_range(100, 150); ret = reset_control_deassert(phy->phy_reset); if (ret) { dev_err(&p->dev, "failed to de-assert phy_reset, %d\n", ret); goto disable_ref_clk; } qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG0, CMN_CTRL_OVERRIDE_EN, CMN_CTRL_OVERRIDE_EN); qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_UTMI_CTRL5, POR, POR); qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL_COMMON0, PHY_ENABLE | RETENABLEN, PHY_ENABLE | RETENABLEN); qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_APB_ACCESS_CMD, APB_LOGIC_RESET, APB_LOGIC_RESET); qcom_snps_eusb2_hsphy_write_mask(phy->base, UTMI_PHY_CMN_CTRL0, TESTBURNIN, 0); qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_FSEL_SEL, FSEL_SEL, FSEL_SEL); /* update ref_clk related registers */ ret = qcom_eusb2_ref_clk_init(phy); if (ret) goto disable_ref_clk; qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_1, PHY_CFG_PLL_CPBIAS_CNTRL_MASK, FIELD_PREP(PHY_CFG_PLL_CPBIAS_CNTRL_MASK, 0x1)); qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_4, PHY_CFG_PLL_INT_CNTRL_MASK, FIELD_PREP(PHY_CFG_PLL_INT_CNTRL_MASK, 0x8)); qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_4, PHY_CFG_PLL_GMP_CNTRL_MASK, FIELD_PREP(PHY_CFG_PLL_GMP_CNTRL_MASK, 0x1)); qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_5, PHY_CFG_PLL_PROP_CNTRL_MASK, FIELD_PREP(PHY_CFG_PLL_PROP_CNTRL_MASK, 0x10)); qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_6, PHY_CFG_PLL_VCO_CNTRL_MASK, FIELD_PREP(PHY_CFG_PLL_VCO_CNTRL_MASK, 0x0)); qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_5, PHY_CFG_PLL_VREF_TUNE_MASK, FIELD_PREP(PHY_CFG_PLL_VREF_TUNE_MASK, 0x1)); qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL2, VBUS_DET_EXT_SEL, VBUS_DET_EXT_SEL); /* set default parameters */ qcom_eusb2_default_parameters(phy); qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL2, USB2_SUSPEND_N_SEL | USB2_SUSPEND_N, USB2_SUSPEND_N_SEL | USB2_SUSPEND_N); qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_UTMI_CTRL0, SLEEPM, SLEEPM); qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL_COMMON0, SIDDQ_SEL, SIDDQ_SEL); qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL_COMMON0, SIDDQ, 0); qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_UTMI_CTRL5, POR, 0); qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL2, USB2_SUSPEND_N_SEL, 0); return 0; disable_ref_clk: clk_disable_unprepare(phy->ref_clk); disable_vreg: regulator_bulk_disable(ARRAY_SIZE(phy->vregs), phy->vregs); return ret; } static int qcom_snps_eusb2_hsphy_exit(struct phy *p) { struct qcom_snps_eusb2_hsphy *phy = phy_get_drvdata(p); clk_disable_unprepare(phy->ref_clk); regulator_bulk_disable(ARRAY_SIZE(phy->vregs), phy->vregs); phy_exit(phy->repeater); return 0; } static const struct phy_ops qcom_snps_eusb2_hsphy_ops = { .init = qcom_snps_eusb2_hsphy_init, .exit = qcom_snps_eusb2_hsphy_exit, .set_mode = qcom_snps_eusb2_hsphy_set_mode, .owner = THIS_MODULE, }; static int qcom_snps_eusb2_hsphy_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; struct qcom_snps_eusb2_hsphy *phy; struct phy_provider *phy_provider; struct phy *generic_phy; int ret, i; int num; phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); if (!phy) return -ENOMEM; phy->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(phy->base)) return PTR_ERR(phy->base); phy->phy_reset = devm_reset_control_get_exclusive(dev, NULL); if (IS_ERR(phy->phy_reset)) return PTR_ERR(phy->phy_reset); phy->ref_clk = devm_clk_get(dev, "ref"); if (IS_ERR(phy->ref_clk)) return dev_err_probe(dev, PTR_ERR(phy->ref_clk), "failed to get ref clk\n"); num = ARRAY_SIZE(phy->vregs); for (i = 0; i < num; i++) phy->vregs[i].supply = eusb2_hsphy_vreg_names[i]; ret = devm_regulator_bulk_get(dev, num, phy->vregs); if (ret) return dev_err_probe(dev, ret, "failed to get regulator supplies\n"); phy->repeater = devm_of_phy_get_by_index(dev, np, 0); if (IS_ERR(phy->repeater)) return dev_err_probe(dev, PTR_ERR(phy->repeater), "failed to get repeater\n"); generic_phy = devm_phy_create(dev, NULL, &qcom_snps_eusb2_hsphy_ops); if (IS_ERR(generic_phy)) { dev_err(dev, "failed to create phy %d\n", ret); return PTR_ERR(generic_phy); } dev_set_drvdata(dev, phy); phy_set_drvdata(generic_phy, phy); phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); if (IS_ERR(phy_provider)) return PTR_ERR(phy_provider); dev_info(dev, "Registered Qcom-eUSB2 phy\n"); return 0; } static const struct of_device_id qcom_snps_eusb2_hsphy_of_match_table[] = { { .compatible = "qcom,sm8550-snps-eusb2-phy", }, { }, }; MODULE_DEVICE_TABLE(of, qcom_snps_eusb2_hsphy_of_match_table); static struct platform_driver qcom_snps_eusb2_hsphy_driver = { .probe = qcom_snps_eusb2_hsphy_probe, .driver = { .name = "qcom-snps-eusb2-hsphy", .of_match_table = qcom_snps_eusb2_hsphy_of_match_table, }, }; module_platform_driver(qcom_snps_eusb2_hsphy_driver); MODULE_DESCRIPTION("Qualcomm SNPS eUSB2 HS PHY driver"); MODULE_LICENSE("GPL");