/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Adaptec AAC series RAID controller driver * (c) Copyright 2001 Red Hat Inc. * * based on the old aacraid driver that is.. * Adaptec aacraid device driver for Linux. * * Copyright (c) 2000-2010 Adaptec, Inc. * 2010-2015 PMC-Sierra, Inc. (aacraid@pmc-sierra.com) * 2016-2017 Microsemi Corp. (aacraid@microsemi.com) * * Module Name: * aacraid.h * * Abstract: Contains all routines for control of the aacraid driver */ #ifndef _AACRAID_H_ #define _AACRAID_H_ #ifndef dprintk # define dprintk(x) #endif /* eg: if (nblank(dprintk(x))) */ #define _nblank(x) #x #define nblank(x) _nblank(x)[0] #include #include #include #include #include /*------------------------------------------------------------------------------ * D E F I N E S *----------------------------------------------------------------------------*/ #define AAC_MAX_MSIX 32 /* vectors */ #define AAC_PCI_MSI_ENABLE 0x8000 enum { AAC_ENABLE_INTERRUPT = 0x0, AAC_DISABLE_INTERRUPT, AAC_ENABLE_MSIX, AAC_DISABLE_MSIX, AAC_CLEAR_AIF_BIT, AAC_CLEAR_SYNC_BIT, AAC_ENABLE_INTX }; #define AAC_INT_MODE_INTX (1<<0) #define AAC_INT_MODE_MSI (1<<1) #define AAC_INT_MODE_AIF (1<<2) #define AAC_INT_MODE_SYNC (1<<3) #define AAC_INT_MODE_MSIX (1<<16) #define AAC_INT_ENABLE_TYPE1_INTX 0xfffffffb #define AAC_INT_ENABLE_TYPE1_MSIX 0xfffffffa #define AAC_INT_DISABLE_ALL 0xffffffff /* Bit definitions in IOA->Host Interrupt Register */ #define PMC_TRANSITION_TO_OPERATIONAL (1<<31) #define PMC_IOARCB_TRANSFER_FAILED (1<<28) #define PMC_IOA_UNIT_CHECK (1<<27) #define PMC_NO_HOST_RRQ_FOR_CMD_RESPONSE (1<<26) #define PMC_CRITICAL_IOA_OP_IN_PROGRESS (1<<25) #define PMC_IOARRIN_LOST (1<<4) #define PMC_SYSTEM_BUS_MMIO_ERROR (1<<3) #define PMC_IOA_PROCESSOR_IN_ERROR_STATE (1<<2) #define PMC_HOST_RRQ_VALID (1<<1) #define PMC_OPERATIONAL_STATUS (1<<31) #define PMC_ALLOW_MSIX_VECTOR0 (1<<0) #define PMC_IOA_ERROR_INTERRUPTS (PMC_IOARCB_TRANSFER_FAILED | \ PMC_IOA_UNIT_CHECK | \ PMC_NO_HOST_RRQ_FOR_CMD_RESPONSE | \ PMC_IOARRIN_LOST | \ PMC_SYSTEM_BUS_MMIO_ERROR | \ PMC_IOA_PROCESSOR_IN_ERROR_STATE) #define PMC_ALL_INTERRUPT_BITS (PMC_IOA_ERROR_INTERRUPTS | \ PMC_HOST_RRQ_VALID | \ PMC_TRANSITION_TO_OPERATIONAL | \ PMC_ALLOW_MSIX_VECTOR0) #define PMC_GLOBAL_INT_BIT2 0x00000004 #define PMC_GLOBAL_INT_BIT0 0x00000001 #ifndef AAC_DRIVER_BUILD # define AAC_DRIVER_BUILD 50983 # define AAC_DRIVER_BRANCH "-custom" #endif #define MAXIMUM_NUM_CONTAINERS 32 #define AAC_NUM_MGT_FIB 8 #define AAC_NUM_IO_FIB (1024 - AAC_NUM_MGT_FIB) #define AAC_NUM_FIB (AAC_NUM_IO_FIB + AAC_NUM_MGT_FIB) #define AAC_MAX_LUN 256 #define AAC_MAX_HOSTPHYSMEMPAGES (0xfffff) #define AAC_MAX_32BIT_SGBCOUNT ((unsigned short)256) #define AAC_DEBUG_INSTRUMENT_AIF_DELETE #define AAC_MAX_NATIVE_TARGETS 1024 /* Thor: 5 phys. buses: #0: empty, 1-4: 256 targets each */ #define AAC_MAX_BUSES 5 #define AAC_MAX_TARGETS 256 #define AAC_BUS_TARGET_LOOP (AAC_MAX_BUSES * AAC_MAX_TARGETS) #define AAC_MAX_NATIVE_SIZE 2048 #define FW_ERROR_BUFFER_SIZE 512 #define AAC_SA_TIMEOUT 180 #define AAC_ARC_TIMEOUT 60 #define get_bus_number(x) (x/AAC_MAX_TARGETS) #define get_target_number(x) (x%AAC_MAX_TARGETS) /* Thor AIF events */ #define SA_AIF_HOTPLUG (1<<1) #define SA_AIF_HARDWARE (1<<2) #define SA_AIF_PDEV_CHANGE (1<<4) #define SA_AIF_LDEV_CHANGE (1<<5) #define SA_AIF_BPSTAT_CHANGE (1<<30) #define SA_AIF_BPCFG_CHANGE (1U<<31) #define HBA_MAX_SG_EMBEDDED 28 #define HBA_MAX_SG_SEPARATE 90 #define HBA_SENSE_DATA_LEN_MAX 32 #define HBA_REQUEST_TAG_ERROR_FLAG 0x00000002 #define HBA_SGL_FLAGS_EXT 0x80000000UL struct aac_hba_sgl { u32 addr_lo; /* Lower 32-bits of SGL element address */ u32 addr_hi; /* Upper 32-bits of SGL element address */ u32 len; /* Length of SGL element in bytes */ u32 flags; /* SGL element flags */ }; enum { HBA_IU_TYPE_SCSI_CMD_REQ = 0x40, HBA_IU_TYPE_SCSI_TM_REQ = 0x41, HBA_IU_TYPE_SATA_REQ = 0x42, HBA_IU_TYPE_RESP = 0x60, HBA_IU_TYPE_COALESCED_RESP = 0x61, HBA_IU_TYPE_INT_COALESCING_CFG_REQ = 0x70 }; enum { HBA_CMD_BYTE1_DATA_DIR_IN = 0x1, HBA_CMD_BYTE1_DATA_DIR_OUT = 0x2, HBA_CMD_BYTE1_DATA_TYPE_DDR = 0x4, HBA_CMD_BYTE1_CRYPTO_ENABLE = 0x8 }; enum { HBA_CMD_BYTE1_BITOFF_DATA_DIR_IN = 0x0, HBA_CMD_BYTE1_BITOFF_DATA_DIR_OUT, HBA_CMD_BYTE1_BITOFF_DATA_TYPE_DDR, HBA_CMD_BYTE1_BITOFF_CRYPTO_ENABLE }; enum { HBA_RESP_DATAPRES_NO_DATA = 0x0, HBA_RESP_DATAPRES_RESPONSE_DATA, HBA_RESP_DATAPRES_SENSE_DATA }; enum { HBA_RESP_SVCRES_TASK_COMPLETE = 0x0, HBA_RESP_SVCRES_FAILURE, HBA_RESP_SVCRES_TMF_COMPLETE, HBA_RESP_SVCRES_TMF_SUCCEEDED, HBA_RESP_SVCRES_TMF_REJECTED, HBA_RESP_SVCRES_TMF_LUN_INVALID }; enum { HBA_RESP_STAT_IO_ERROR = 0x1, HBA_RESP_STAT_IO_ABORTED, HBA_RESP_STAT_NO_PATH_TO_DEVICE, HBA_RESP_STAT_INVALID_DEVICE, HBA_RESP_STAT_HBAMODE_DISABLED = 0xE, HBA_RESP_STAT_UNDERRUN = 0x51, HBA_RESP_STAT_OVERRUN = 0x75 }; struct aac_hba_cmd_req { u8 iu_type; /* HBA information unit type */ /* * byte1: * [1:0] DIR - 0=No data, 0x1 = IN, 0x2 = OUT * [2] TYPE - 0=PCI, 1=DDR * [3] CRYPTO_ENABLE - 0=Crypto disabled, 1=Crypto enabled */ u8 byte1; u8 reply_qid; /* Host reply queue to post response to */ u8 reserved1; __le32 it_nexus; /* Device handle for the request */ __le32 request_id; /* Sender context */ /* Lower 32-bits of tweak value for crypto enabled IOs */ __le32 tweak_value_lo; u8 cdb[16]; /* SCSI CDB of the command */ u8 lun[8]; /* SCSI LUN of the command */ /* Total data length in bytes to be read/written (if any) */ __le32 data_length; /* [2:0] Task Attribute, [6:3] Command Priority */ u8 attr_prio; /* Number of SGL elements embedded in the HBA req */ u8 emb_data_desc_count; __le16 dek_index; /* DEK index for crypto enabled IOs */ /* Lower 32-bits of reserved error data target location on the host */ __le32 error_ptr_lo; /* Upper 32-bits of reserved error data target location on the host */ __le32 error_ptr_hi; /* Length of reserved error data area on the host in bytes */ __le32 error_length; /* Upper 32-bits of tweak value for crypto enabled IOs */ __le32 tweak_value_hi; struct aac_hba_sgl sge[HBA_MAX_SG_SEPARATE+2]; /* SG list space */ /* * structure must not exceed * AAC_MAX_NATIVE_SIZE-FW_ERROR_BUFFER_SIZE */ }; /* Task Management Functions (TMF) */ #define HBA_TMF_ABORT_TASK 0x01 #define HBA_TMF_LUN_RESET 0x08 struct aac_hba_tm_req { u8 iu_type; /* HBA information unit type */ u8 reply_qid; /* Host reply queue to post response to */ u8 tmf; /* Task management function */ u8 reserved1; __le32 it_nexus; /* Device handle for the command */ u8 lun[8]; /* SCSI LUN */ /* Used to hold sender context. */ __le32 request_id; /* Sender context */ __le32 reserved2; /* Request identifier of managed task */ __le32 managed_request_id; /* Sender context being managed */ __le32 reserved3; /* Lower 32-bits of reserved error data target location on the host */ __le32 error_ptr_lo; /* Upper 32-bits of reserved error data target location on the host */ __le32 error_ptr_hi; /* Length of reserved error data area on the host in bytes */ __le32 error_length; }; struct aac_hba_reset_req { u8 iu_type; /* HBA information unit type */ /* 0 - reset specified device, 1 - reset all devices */ u8 reset_type; u8 reply_qid; /* Host reply queue to post response to */ u8 reserved1; __le32 it_nexus; /* Device handle for the command */ __le32 request_id; /* Sender context */ /* Lower 32-bits of reserved error data target location on the host */ __le32 error_ptr_lo; /* Upper 32-bits of reserved error data target location on the host */ __le32 error_ptr_hi; /* Length of reserved error data area on the host in bytes */ __le32 error_length; }; struct aac_hba_resp { u8 iu_type; /* HBA information unit type */ u8 reserved1[3]; __le32 request_identifier; /* sender context */ __le32 reserved2; u8 service_response; /* SCSI service response */ u8 status; /* SCSI status */ u8 datapres; /* [1:0] - data present, [7:2] - reserved */ u8 sense_response_data_len; /* Sense/response data length */ __le32 residual_count; /* Residual data length in bytes */ /* Sense/response data */ u8 sense_response_buf[HBA_SENSE_DATA_LEN_MAX]; }; struct aac_native_hba { union { struct aac_hba_cmd_req cmd; struct aac_hba_tm_req tmr; u8 cmd_bytes[AAC_MAX_NATIVE_SIZE-FW_ERROR_BUFFER_SIZE]; } cmd; union { struct aac_hba_resp err; u8 resp_bytes[FW_ERROR_BUFFER_SIZE]; } resp; }; #define CISS_REPORT_PHYSICAL_LUNS 0xc3 #define WRITE_HOST_WELLNESS 0xa5 #define CISS_IDENTIFY_PHYSICAL_DEVICE 0x15 #define BMIC_IN 0x26 #define BMIC_OUT 0x27 struct aac_ciss_phys_luns_resp { u8 list_length[4]; /* LUN list length (N-7, big endian) */ u8 resp_flag; /* extended response_flag */ u8 reserved[3]; struct _ciss_lun { u8 tid[3]; /* Target ID */ u8 bus; /* Bus, flag (bits 6,7) */ u8 level3[2]; u8 level2[2]; u8 node_ident[16]; /* phys. node identifier */ } lun[]; /* List of phys. devices */ }; /* * Interrupts */ #define AAC_MAX_HRRQ 64 struct aac_ciss_identify_pd { u8 scsi_bus; /* SCSI Bus number on controller */ u8 scsi_id; /* SCSI ID on this bus */ u16 block_size; /* sector size in bytes */ u32 total_blocks; /* number for sectors on drive */ u32 reserved_blocks; /* controller reserved (RIS) */ u8 model[40]; /* Physical Drive Model */ u8 serial_number[40]; /* Drive Serial Number */ u8 firmware_revision[8]; /* drive firmware revision */ u8 scsi_inquiry_bits; /* inquiry byte 7 bits */ u8 compaq_drive_stamp; /* 0 means drive not stamped */ u8 last_failure_reason; u8 flags; u8 more_flags; u8 scsi_lun; /* SCSI LUN for phys drive */ u8 yet_more_flags; u8 even_more_flags; u32 spi_speed_rules; /* SPI Speed :Ultra disable diagnose */ u8 phys_connector[2]; /* connector number on controller */ u8 phys_box_on_bus; /* phys enclosure this drive resides */ u8 phys_bay_in_box; /* phys drv bay this drive resides */ u32 rpm; /* Drive rotational speed in rpm */ u8 device_type; /* type of drive */ u8 sata_version; /* only valid when drive_type is SATA */ u64 big_total_block_count; u64 ris_starting_lba; u32 ris_size; u8 wwid[20]; u8 controller_phy_map[32]; u16 phy_count; u8 phy_connected_dev_type[256]; u8 phy_to_drive_bay_num[256]; u16 phy_to_attached_dev_index[256]; u8 box_index; u8 spitfire_support; u16 extra_physical_drive_flags; u8 negotiated_link_rate[256]; u8 phy_to_phy_map[256]; u8 redundant_path_present_map; u8 redundant_path_failure_map; u8 active_path_number; u16 alternate_paths_phys_connector[8]; u8 alternate_paths_phys_box_on_port[8]; u8 multi_lun_device_lun_count; u8 minimum_good_fw_revision[8]; u8 unique_inquiry_bytes[20]; u8 current_temperature_degreesC; u8 temperature_threshold_degreesC; u8 max_temperature_degreesC; u8 logical_blocks_per_phys_block_exp; /* phyblocksize = 512 * 2^exp */ u16 current_queue_depth_limit; u8 switch_name[10]; u16 switch_port; u8 alternate_paths_switch_name[40]; u8 alternate_paths_switch_port[8]; u16 power_on_hours; /* valid only if gas gauge supported */ u16 percent_endurance_used; /* valid only if gas gauge supported. */ u8 drive_authentication; u8 smart_carrier_authentication; u8 smart_carrier_app_fw_version; u8 smart_carrier_bootloader_fw_version; u8 SanitizeSecureEraseSupport; u8 DriveKeyFlags; u8 encryption_key_name[64]; u32 misc_drive_flags; u16 dek_index; u16 drive_encryption_flags; u8 sanitize_maximum_time[6]; u8 connector_info_mode; u8 connector_info_number[4]; u8 long_connector_name[64]; u8 device_unique_identifier[16]; u8 padto_2K[17]; } __packed; /* * These macros convert from physical channels to virtual channels */ #define CONTAINER_CHANNEL (0) #define NATIVE_CHANNEL (1) #define CONTAINER_TO_CHANNEL(cont) (CONTAINER_CHANNEL) #define CONTAINER_TO_ID(cont) (cont) #define CONTAINER_TO_LUN(cont) (0) #define ENCLOSURE_CHANNEL (3) #define PMC_DEVICE_S6 0x28b #define PMC_DEVICE_S7 0x28c #define PMC_DEVICE_S8 0x28d #define aac_phys_to_logical(x) ((x)+1) #define aac_logical_to_phys(x) ((x)?(x)-1:0) /* * These macros are for keeping track of * character device state. */ #define AAC_CHARDEV_UNREGISTERED (-1) #define AAC_CHARDEV_NEEDS_REINIT (-2) /* #define AAC_DETAILED_STATUS_INFO */ struct diskparm { int heads; int sectors; int cylinders; }; /* * Firmware constants */ #define CT_NONE 0 #define CT_OK 218 #define FT_FILESYS 8 /* ADAPTEC's "FSA"(tm) filesystem */ #define FT_DRIVE 9 /* physical disk - addressable in scsi by bus/id/lun */ /* * Host side memory scatter gather list * Used by the adapter for read, write, and readdirplus operations * We have separate 32 and 64 bit version because even * on 64 bit systems not all cards support the 64 bit version */ struct sgentry { __le32 addr; /* 32-bit address. */ __le32 count; /* Length. */ }; struct user_sgentry { u32 addr; /* 32-bit address. */ u32 count; /* Length. */ }; struct sgentry64 { __le32 addr[2]; /* 64-bit addr. 2 pieces for data alignment */ __le32 count; /* Length. */ }; struct user_sgentry64 { u32 addr[2]; /* 64-bit addr. 2 pieces for data alignment */ u32 count; /* Length. */ }; struct sgentryraw { __le32 next; /* reserved for F/W use */ __le32 prev; /* reserved for F/W use */ __le32 addr[2]; __le32 count; __le32 flags; /* reserved for F/W use */ }; struct user_sgentryraw { u32 next; /* reserved for F/W use */ u32 prev; /* reserved for F/W use */ u32 addr[2]; u32 count; u32 flags; /* reserved for F/W use */ }; struct sge_ieee1212 { u32 addrLow; u32 addrHigh; u32 length; u32 flags; }; /* * SGMAP * * This is the SGMAP structure for all commands that use * 32-bit addressing. */ struct sgmap { __le32 count; struct sgentry sg[]; }; struct user_sgmap { u32 count; struct user_sgentry sg[]; }; struct sgmap64 { __le32 count; struct sgentry64 sg[]; }; struct user_sgmap64 { u32 count; struct user_sgentry64 sg[]; }; struct sgmapraw { __le32 count; struct sgentryraw sg[]; }; struct creation_info { u8 buildnum; /* e.g., 588 */ u8 usec; /* e.g., 588 */ u8 via; /* e.g., 1 = FSU, * 2 = API */ u8 year; /* e.g., 1997 = 97 */ __le32 date; /* * unsigned Month :4; // 1 - 12 * unsigned Day :6; // 1 - 32 * unsigned Hour :6; // 0 - 23 * unsigned Minute :6; // 0 - 60 * unsigned Second :6; // 0 - 60 */ __le32 serial[2]; /* e.g., 0x1DEADB0BFAFAF001 */ }; /* * Define all the constants needed for the communication interface */ /* * Define how many queue entries each queue will have and the total * number of entries for the entire communication interface. Also define * how many queues we support. * * This has to match the controller */ #define NUMBER_OF_COMM_QUEUES 8 // 4 command; 4 response #define HOST_HIGH_CMD_ENTRIES 4 #define HOST_NORM_CMD_ENTRIES 8 #define ADAP_HIGH_CMD_ENTRIES 4 #define ADAP_NORM_CMD_ENTRIES 512 #define HOST_HIGH_RESP_ENTRIES 4 #define HOST_NORM_RESP_ENTRIES 512 #define ADAP_HIGH_RESP_ENTRIES 4 #define ADAP_NORM_RESP_ENTRIES 8 #define TOTAL_QUEUE_ENTRIES \ (HOST_NORM_CMD_ENTRIES + HOST_HIGH_CMD_ENTRIES + ADAP_NORM_CMD_ENTRIES + ADAP_HIGH_CMD_ENTRIES + \ HOST_NORM_RESP_ENTRIES + HOST_HIGH_RESP_ENTRIES + ADAP_NORM_RESP_ENTRIES + ADAP_HIGH_RESP_ENTRIES) /* * Set the queues on a 16 byte alignment */ #define QUEUE_ALIGNMENT 16 /* * The queue headers define the Communication Region queues. These * are physically contiguous and accessible by both the adapter and the * host. Even though all queue headers are in the same contiguous block * they will be represented as individual units in the data structures. */ struct aac_entry { __le32 size; /* Size in bytes of Fib which this QE points to */ __le32 addr; /* Receiver address of the FIB */ }; /* * The adapter assumes the ProducerIndex and ConsumerIndex are grouped * adjacently and in that order. */ struct aac_qhdr { __le64 header_addr;/* Address to hand the adapter to access to this queue head */ __le32 *producer; /* The producer index for this queue (host address) */ __le32 *consumer; /* The consumer index for this queue (host address) */ }; /* * Define all the events which the adapter would like to notify * the host of. */ #define HostNormCmdQue 1 /* Change in host normal priority command queue */ #define HostHighCmdQue 2 /* Change in host high priority command queue */ #define HostNormRespQue 3 /* Change in host normal priority response queue */ #define HostHighRespQue 4 /* Change in host high priority response queue */ #define AdapNormRespNotFull 5 #define AdapHighRespNotFull 6 #define AdapNormCmdNotFull 7 #define AdapHighCmdNotFull 8 #define SynchCommandComplete 9 #define AdapInternalError 0xfe /* The adapter detected an internal error shutting down */ /* * Define all the events the host wishes to notify the * adapter of. The first four values much match the Qid the * corresponding queue. */ #define AdapNormCmdQue 2 #define AdapHighCmdQue 3 #define AdapNormRespQue 6 #define AdapHighRespQue 7 #define HostShutdown 8 #define HostPowerFail 9 #define FatalCommError 10 #define HostNormRespNotFull 11 #define HostHighRespNotFull 12 #define HostNormCmdNotFull 13 #define HostHighCmdNotFull 14 #define FastIo 15 #define AdapPrintfDone 16 /* * Define all the queues that the adapter and host use to communicate * Number them to match the physical queue layout. */ enum aac_queue_types { HostNormCmdQueue = 0, /* Adapter to host normal priority command traffic */ HostHighCmdQueue, /* Adapter to host high priority command traffic */ AdapNormCmdQueue, /* Host to adapter normal priority command traffic */ AdapHighCmdQueue, /* Host to adapter high priority command traffic */ HostNormRespQueue, /* Adapter to host normal priority response traffic */ HostHighRespQueue, /* Adapter to host high priority response traffic */ AdapNormRespQueue, /* Host to adapter normal priority response traffic */ AdapHighRespQueue /* Host to adapter high priority response traffic */ }; /* * Assign type values to the FSA communication data structures */ #define FIB_MAGIC 0x0001 #define FIB_MAGIC2 0x0004 #define FIB_MAGIC2_64 0x0005 /* * Define the priority levels the FSA communication routines support. */ #define FsaNormal 1 /* transport FIB header (PMC) */ struct aac_fib_xporthdr { __le64 HostAddress; /* FIB host address w/o xport header */ __le32 Size; /* FIB size excluding xport header */ __le32 Handle; /* driver handle to reference the FIB */ __le64 Reserved[2]; }; #define ALIGN32 32 /* * Define the FIB. The FIB is the where all the requested data and * command information are put to the application on the FSA adapter. */ struct aac_fibhdr { __le32 XferState; /* Current transfer state for this CCB */ __le16 Command; /* Routing information for the destination */ u8 StructType; /* Type FIB */ u8 Unused; /* Unused */ __le16 Size; /* Size of this FIB in bytes */ __le16 SenderSize; /* Size of the FIB in the sender (for response sizing) */ __le32 SenderFibAddress; /* Host defined data in the FIB */ union { __le32 ReceiverFibAddress;/* Logical address of this FIB for the adapter (old) */ __le32 SenderFibAddressHigh;/* upper 32bit of phys. FIB address */ __le32 TimeStamp; /* otherwise timestamp for FW internal use */ } u; __le32 Handle; /* FIB handle used for MSGU commnunication */ u32 Previous; /* FW internal use */ u32 Next; /* FW internal use */ }; struct hw_fib { struct aac_fibhdr header; u8 data[512-sizeof(struct aac_fibhdr)]; // Command specific data }; /* * FIB commands */ #define TestCommandResponse 1 #define TestAdapterCommand 2 /* * Lowlevel and comm commands */ #define LastTestCommand 100 #define ReinitHostNormCommandQueue 101 #define ReinitHostHighCommandQueue 102 #define ReinitHostHighRespQueue 103 #define ReinitHostNormRespQueue 104 #define ReinitAdapNormCommandQueue 105 #define ReinitAdapHighCommandQueue 107 #define ReinitAdapHighRespQueue 108 #define ReinitAdapNormRespQueue 109 #define InterfaceShutdown 110 #define DmaCommandFib 120 #define StartProfile 121 #define TermProfile 122 #define SpeedTest 123 #define TakeABreakPt 124 #define RequestPerfData 125 #define SetInterruptDefTimer 126 #define SetInterruptDefCount 127 #define GetInterruptDefStatus 128 #define LastCommCommand 129 /* * Filesystem commands */ #define NuFileSystem 300 #define UFS 301 #define HostFileSystem 302 #define LastFileSystemCommand 303 /* * Container Commands */ #define ContainerCommand 500 #define ContainerCommand64 501 #define ContainerRawIo 502 #define ContainerRawIo2 503 /* * Scsi Port commands (scsi passthrough) */ #define ScsiPortCommand 600 #define ScsiPortCommand64 601 /* * Misc house keeping and generic adapter initiated commands */ #define AifRequest 700 #define CheckRevision 701 #define FsaHostShutdown 702 #define RequestAdapterInfo 703 #define IsAdapterPaused 704 #define SendHostTime 705 #define RequestSupplementAdapterInfo 706 #define LastMiscCommand 707 /* * Commands that will target the failover level on the FSA adapter */ enum fib_xfer_state { HostOwned = (1<<0), AdapterOwned = (1<<1), FibInitialized = (1<<2), FibEmpty = (1<<3), AllocatedFromPool = (1<<4), SentFromHost = (1<<5), SentFromAdapter = (1<<6), ResponseExpected = (1<<7), NoResponseExpected = (1<<8), AdapterProcessed = (1<<9), HostProcessed = (1<<10), HighPriority = (1<<11), NormalPriority = (1<<12), Async = (1<<13), AsyncIo = (1<<13), // rpbfix: remove with new regime PageFileIo = (1<<14), // rpbfix: remove with new regime ShutdownRequest = (1<<15), LazyWrite = (1<<16), // rpbfix: remove with new regime AdapterMicroFib = (1<<17), BIOSFibPath = (1<<18), FastResponseCapable = (1<<19), ApiFib = (1<<20), /* Its an API Fib */ /* PMC NEW COMM: There is no more AIF data pending */ NoMoreAifDataAvailable = (1<<21) }; /* * The following defines needs to be updated any time there is an * incompatible change made to the aac_init structure. */ #define ADAPTER_INIT_STRUCT_REVISION 3 #define ADAPTER_INIT_STRUCT_REVISION_4 4 // rocket science #define ADAPTER_INIT_STRUCT_REVISION_6 6 /* PMC src */ #define ADAPTER_INIT_STRUCT_REVISION_7 7 /* Denali */ #define ADAPTER_INIT_STRUCT_REVISION_8 8 // Thor union aac_init { struct _r7 { __le32 init_struct_revision; __le32 no_of_msix_vectors; __le32 fsrev; __le32 comm_header_address; __le32 fast_io_comm_area_address; __le32 adapter_fibs_physical_address; __le32 adapter_fibs_virtual_address; __le32 adapter_fibs_size; __le32 adapter_fib_align; __le32 printfbuf; __le32 printfbufsiz; /* number of 4k pages of host phys. mem. */ __le32 host_phys_mem_pages; /* number of seconds since 1970. */ __le32 host_elapsed_seconds; /* ADAPTER_INIT_STRUCT_REVISION_4 begins here */ __le32 init_flags; /* flags for supported features */ #define INITFLAGS_NEW_COMM_SUPPORTED 0x00000001 #define INITFLAGS_DRIVER_USES_UTC_TIME 0x00000010 #define INITFLAGS_DRIVER_SUPPORTS_PM 0x00000020 #define INITFLAGS_NEW_COMM_TYPE1_SUPPORTED 0x00000040 #define INITFLAGS_FAST_JBOD_SUPPORTED 0x00000080 #define INITFLAGS_NEW_COMM_TYPE2_SUPPORTED 0x00000100 #define INITFLAGS_DRIVER_SUPPORTS_HBA_MODE 0x00000400 __le32 max_io_commands; /* max outstanding commands */ __le32 max_io_size; /* largest I/O command */ __le32 max_fib_size; /* largest FIB to adapter */ /* ADAPTER_INIT_STRUCT_REVISION_5 begins here */ __le32 max_num_aif; /* max number of aif */ /* ADAPTER_INIT_STRUCT_REVISION_6 begins here */ /* Host RRQ (response queue) for SRC */ __le32 host_rrq_addr_low; __le32 host_rrq_addr_high; } r7; struct _r8 { /* ADAPTER_INIT_STRUCT_REVISION_8 */ __le32 init_struct_revision; __le32 rr_queue_count; __le32 host_elapsed_seconds; /* number of secs since 1970. */ __le32 init_flags; __le32 max_io_size; /* largest I/O command */ __le32 max_num_aif; /* max number of aif */ __le32 reserved1; __le32 reserved2; struct _rrq { __le32 host_addr_low; __le32 host_addr_high; __le16 msix_id; __le16 element_count; __le16 comp_thresh; __le16 unused; } rrq[] __counted_by_le(rr_queue_count); /* up to 64 RRQ addresses */ } r8; }; enum aac_log_level { LOG_AAC_INIT = 10, LOG_AAC_INFORMATIONAL = 20, LOG_AAC_WARNING = 30, LOG_AAC_LOW_ERROR = 40, LOG_AAC_MEDIUM_ERROR = 50, LOG_AAC_HIGH_ERROR = 60, LOG_AAC_PANIC = 70, LOG_AAC_DEBUG = 80, LOG_AAC_WINDBG_PRINT = 90 }; #define FSAFS_NTC_GET_ADAPTER_FIB_CONTEXT 0x030b #define FSAFS_NTC_FIB_CONTEXT 0x030c struct aac_dev; struct fib; struct scsi_cmnd; struct adapter_ops { /* Low level operations */ void (*adapter_interrupt)(struct aac_dev *dev); void (*adapter_notify)(struct aac_dev *dev, u32 event); void (*adapter_disable_int)(struct aac_dev *dev); void (*adapter_enable_int)(struct aac_dev *dev); int (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4); int (*adapter_check_health)(struct aac_dev *dev); int (*adapter_restart)(struct aac_dev *dev, int bled, u8 reset_type); void (*adapter_start)(struct aac_dev *dev); /* Transport operations */ int (*adapter_ioremap)(struct aac_dev * dev, u32 size); irq_handler_t adapter_intr; /* Packet operations */ int (*adapter_deliver)(struct fib * fib); int (*adapter_bounds)(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba); int (*adapter_read)(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count); int (*adapter_write)(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua); int (*adapter_scsi)(struct fib * fib, struct scsi_cmnd * cmd); /* Administrative operations */ int (*adapter_comm)(struct aac_dev * dev, int comm); }; /* * Define which interrupt handler needs to be installed */ struct aac_driver_ident { int (*init)(struct aac_dev *dev); char * name; char * vname; char * model; u16 channels; int quirks; }; /* * Some adapter firmware needs communication memory * below 2gig. This tells the init function to set the * dma mask such that fib memory will be allocated where the * adapter firmware can get to it. */ #define AAC_QUIRK_31BIT 0x0001 /* * Some adapter firmware, when the raid card's cache is turned off, can not * split up scatter gathers in order to deal with the limits of the * underlying CHIM. This limit is 34 scatter gather elements. */ #define AAC_QUIRK_34SG 0x0002 /* * This adapter is a slave (no Firmware) */ #define AAC_QUIRK_SLAVE 0x0004 /* * This adapter is a master. */ #define AAC_QUIRK_MASTER 0x0008 /* * Some adapter firmware perform poorly when it must split up scatter gathers * in order to deal with the limits of the underlying CHIM. This limit in this * class of adapters is 17 scatter gather elements. */ #define AAC_QUIRK_17SG 0x0010 /* * Some adapter firmware does not support 64 bit scsi passthrough * commands. */ #define AAC_QUIRK_SCSI_32 0x0020 /* * SRC based adapters support the AifReqEvent functions */ #define AAC_QUIRK_SRC 0x0040 /* * The adapter interface specs all queues to be located in the same * physically contiguous block. The host structure that defines the * commuication queues will assume they are each a separate physically * contiguous memory region that will support them all being one big * contiguous block. * There is a command and response queue for each level and direction of * commuication. These regions are accessed by both the host and adapter. */ struct aac_queue { u64 logical; /*address we give the adapter */ struct aac_entry *base; /*system virtual address */ struct aac_qhdr headers; /*producer,consumer q headers*/ u32 entries; /*Number of queue entries */ wait_queue_head_t qfull; /*Event to wait on if q full */ wait_queue_head_t cmdready; /*Cmd ready from the adapter */ /* This is only valid for adapter to host command queues. */ spinlock_t *lock; /* Spinlock for this queue must take this lock before accessing the lock */ spinlock_t lockdata; /* Actual lock (used only on one side of the lock) */ struct list_head cmdq; /* A queue of FIBs which need to be prcessed by the FS thread. This is */ /* only valid for command queues which receive entries from the adapter. */ /* Number of entries on outstanding queue. */ atomic_t numpending; struct aac_dev * dev; /* Back pointer to adapter structure */ }; /* * Message queues. The order here is important, see also the * queue type ordering */ struct aac_queue_block { struct aac_queue queue[8]; }; /* * SaP1 Message Unit Registers */ struct sa_drawbridge_CSR { /* Offset | Name */ __le32 reserved[10]; /* 00h-27h | Reserved */ u8 LUT_Offset; /* 28h | Lookup Table Offset */ u8 reserved1[3]; /* 29h-2bh | Reserved */ __le32 LUT_Data; /* 2ch | Looup Table Data */ __le32 reserved2[26]; /* 30h-97h | Reserved */ __le16 PRICLEARIRQ; /* 98h | Primary Clear Irq */ __le16 SECCLEARIRQ; /* 9ah | Secondary Clear Irq */ __le16 PRISETIRQ; /* 9ch | Primary Set Irq */ __le16 SECSETIRQ; /* 9eh | Secondary Set Irq */ __le16 PRICLEARIRQMASK;/* a0h | Primary Clear Irq Mask */ __le16 SECCLEARIRQMASK;/* a2h | Secondary Clear Irq Mask */ __le16 PRISETIRQMASK; /* a4h | Primary Set Irq Mask */ __le16 SECSETIRQMASK; /* a6h | Secondary Set Irq Mask */ __le32 MAILBOX0; /* a8h | Scratchpad 0 */ __le32 MAILBOX1; /* ach | Scratchpad 1 */ __le32 MAILBOX2; /* b0h | Scratchpad 2 */ __le32 MAILBOX3; /* b4h | Scratchpad 3 */ __le32 MAILBOX4; /* b8h | Scratchpad 4 */ __le32 MAILBOX5; /* bch | Scratchpad 5 */ __le32 MAILBOX6; /* c0h | Scratchpad 6 */ __le32 MAILBOX7; /* c4h | Scratchpad 7 */ __le32 ROM_Setup_Data; /* c8h | Rom Setup and Data */ __le32 ROM_Control_Addr;/* cch | Rom Control and Address */ __le32 reserved3[12]; /* d0h-ffh | reserved */ __le32 LUT[64]; /* 100h-1ffh | Lookup Table Entries */ }; #define Mailbox0 SaDbCSR.MAILBOX0 #define Mailbox1 SaDbCSR.MAILBOX1 #define Mailbox2 SaDbCSR.MAILBOX2 #define Mailbox3 SaDbCSR.MAILBOX3 #define Mailbox4 SaDbCSR.MAILBOX4 #define Mailbox5 SaDbCSR.MAILBOX5 #define Mailbox6 SaDbCSR.MAILBOX6 #define Mailbox7 SaDbCSR.MAILBOX7 #define DoorbellReg_p SaDbCSR.PRISETIRQ #define DoorbellReg_s SaDbCSR.SECSETIRQ #define DoorbellClrReg_p SaDbCSR.PRICLEARIRQ #define DOORBELL_0 0x0001 #define DOORBELL_1 0x0002 #define DOORBELL_2 0x0004 #define DOORBELL_3 0x0008 #define DOORBELL_4 0x0010 #define DOORBELL_5 0x0020 #define DOORBELL_6 0x0040 #define PrintfReady DOORBELL_5 #define PrintfDone DOORBELL_5 struct sa_registers { struct sa_drawbridge_CSR SaDbCSR; /* 98h - c4h */ }; #define SA_INIT_NUM_MSIXVECTORS 1 #define SA_MINIPORT_REVISION SA_INIT_NUM_MSIXVECTORS #define sa_readw(AEP, CSR) readl(&((AEP)->regs.sa->CSR)) #define sa_readl(AEP, CSR) readl(&((AEP)->regs.sa->CSR)) #define sa_writew(AEP, CSR, value) writew(value, &((AEP)->regs.sa->CSR)) #define sa_writel(AEP, CSR, value) writel(value, &((AEP)->regs.sa->CSR)) /* * Rx Message Unit Registers */ struct rx_mu_registers { /* Local | PCI*| Name */ __le32 ARSR; /* 1300h | 00h | APIC Register Select Register */ __le32 reserved0; /* 1304h | 04h | Reserved */ __le32 AWR; /* 1308h | 08h | APIC Window Register */ __le32 reserved1; /* 130Ch | 0Ch | Reserved */ __le32 IMRx[2]; /* 1310h | 10h | Inbound Message Registers */ __le32 OMRx[2]; /* 1318h | 18h | Outbound Message Registers */ __le32 IDR; /* 1320h | 20h | Inbound Doorbell Register */ __le32 IISR; /* 1324h | 24h | Inbound Interrupt Status Register */ __le32 IIMR; /* 1328h | 28h | Inbound Interrupt Mask Register */ __le32 ODR; /* 132Ch | 2Ch | Outbound Doorbell Register */ __le32 OISR; /* 1330h | 30h | Outbound Interrupt Status Register */ __le32 OIMR; /* 1334h | 34h | Outbound Interrupt Mask Register */ __le32 reserved2; /* 1338h | 38h | Reserved */ __le32 reserved3; /* 133Ch | 3Ch | Reserved */ __le32 InboundQueue;/* 1340h | 40h | Inbound Queue Port relative to firmware */ __le32 OutboundQueue;/*1344h | 44h | Outbound Queue Port relative to firmware */ /* * Must access through ATU Inbound Translation Window */ }; struct rx_inbound { __le32 Mailbox[8]; }; #define INBOUNDDOORBELL_0 0x00000001 #define INBOUNDDOORBELL_1 0x00000002 #define INBOUNDDOORBELL_2 0x00000004 #define INBOUNDDOORBELL_3 0x00000008 #define INBOUNDDOORBELL_4 0x00000010 #define INBOUNDDOORBELL_5 0x00000020 #define INBOUNDDOORBELL_6 0x00000040 #define OUTBOUNDDOORBELL_0 0x00000001 #define OUTBOUNDDOORBELL_1 0x00000002 #define OUTBOUNDDOORBELL_2 0x00000004 #define OUTBOUNDDOORBELL_3 0x00000008 #define OUTBOUNDDOORBELL_4 0x00000010 #define InboundDoorbellReg MUnit.IDR #define OutboundDoorbellReg MUnit.ODR struct rx_registers { struct rx_mu_registers MUnit; /* 1300h - 1347h */ __le32 reserved1[2]; /* 1348h - 134ch */ struct rx_inbound IndexRegs; }; #define rx_readb(AEP, CSR) readb(&((AEP)->regs.rx->CSR)) #define rx_readl(AEP, CSR) readl(&((AEP)->regs.rx->CSR)) #define rx_writeb(AEP, CSR, value) writeb(value, &((AEP)->regs.rx->CSR)) #define rx_writel(AEP, CSR, value) writel(value, &((AEP)->regs.rx->CSR)) /* * Rkt Message Unit Registers (same as Rx, except a larger reserve region) */ #define rkt_mu_registers rx_mu_registers #define rkt_inbound rx_inbound struct rkt_registers { struct rkt_mu_registers MUnit; /* 1300h - 1347h */ __le32 reserved1[1006]; /* 1348h - 22fch */ struct rkt_inbound IndexRegs; /* 2300h - */ }; #define rkt_readb(AEP, CSR) readb(&((AEP)->regs.rkt->CSR)) #define rkt_readl(AEP, CSR) readl(&((AEP)->regs.rkt->CSR)) #define rkt_writeb(AEP, CSR, value) writeb(value, &((AEP)->regs.rkt->CSR)) #define rkt_writel(AEP, CSR, value) writel(value, &((AEP)->regs.rkt->CSR)) /* * PMC SRC message unit registers */ #define src_inbound rx_inbound struct src_mu_registers { /* PCI*| Name */ __le32 reserved0[6]; /* 00h | Reserved */ __le32 IOAR[2]; /* 18h | IOA->host interrupt register */ __le32 IDR; /* 20h | Inbound Doorbell Register */ __le32 IISR; /* 24h | Inbound Int. Status Register */ __le32 reserved1[3]; /* 28h | Reserved */ __le32 OIMR; /* 34h | Outbound Int. Mask Register */ __le32 reserved2[25]; /* 38h | Reserved */ __le32 ODR_R; /* 9ch | Outbound Doorbell Read */ __le32 ODR_C; /* a0h | Outbound Doorbell Clear */ __le32 reserved3[3]; /* a4h | Reserved */ __le32 SCR0; /* b0h | Scratchpad 0 */ __le32 reserved4[2]; /* b4h | Reserved */ __le32 OMR; /* bch | Outbound Message Register */ __le32 IQ_L; /* c0h | Inbound Queue (Low address) */ __le32 IQ_H; /* c4h | Inbound Queue (High address) */ __le32 ODR_MSI; /* c8h | MSI register for sync./AIF */ __le32 reserved5; /* cch | Reserved */ __le32 IQN_L; /* d0h | Inbound (native cmd) low */ __le32 IQN_H; /* d4h | Inbound (native cmd) high */ }; struct src_registers { struct src_mu_registers MUnit; /* 00h - cbh */ union { struct { __le32 reserved1[130786]; /* d8h - 7fc5fh */ struct src_inbound IndexRegs; /* 7fc60h */ } tupelo; struct { __le32 reserved1[970]; /* d8h - fffh */ struct src_inbound IndexRegs; /* 1000h */ } denali; } u; }; #define src_readb(AEP, CSR) readb(&((AEP)->regs.src.bar0->CSR)) #define src_readl(AEP, CSR) readl(&((AEP)->regs.src.bar0->CSR)) #define src_writeb(AEP, CSR, value) writeb(value, \ &((AEP)->regs.src.bar0->CSR)) #define src_writel(AEP, CSR, value) writel(value, \ &((AEP)->regs.src.bar0->CSR)) #if defined(writeq) #define src_writeq(AEP, CSR, value) writeq(value, \ &((AEP)->regs.src.bar0->CSR)) #endif #define SRC_ODR_SHIFT 12 #define SRC_IDR_SHIFT 9 #define SRC_MSI_READ_MASK 0x1000 typedef void (*fib_callback)(void *ctxt, struct fib *fibctx); struct aac_fib_context { s16 type; // used for verification of structure s16 size; u32 unique; // unique value representing this context ulong jiffies; // used for cleanup - dmb changed to ulong struct list_head next; // used to link context's into a linked list struct completion completion; // this is used to wait for the next fib to arrive. int wait; // Set to true when thread is in WaitForSingleObject unsigned long count; // total number of FIBs on FibList struct list_head fib_list; // this holds fibs and their attachd hw_fibs }; struct sense_data { u8 error_code; /* 70h (current errors), 71h(deferred errors) */ u8 valid:1; /* A valid bit of one indicates that the information */ /* field contains valid information as defined in the * SCSI-2 Standard. */ u8 segment_number; /* Only used for COPY, COMPARE, or COPY AND VERIFY Commands */ u8 sense_key:4; /* Sense Key */ u8 reserved:1; u8 ILI:1; /* Incorrect Length Indicator */ u8 EOM:1; /* End Of Medium - reserved for random access devices */ u8 filemark:1; /* Filemark - reserved for random access devices */ u8 information[4]; /* for direct-access devices, contains the unsigned * logical block address or residue associated with * the sense key */ u8 add_sense_len; /* number of additional sense bytes to follow this field */ u8 cmnd_info[4]; /* not used */ u8 ASC; /* Additional Sense Code */ u8 ASCQ; /* Additional Sense Code Qualifier */ u8 FRUC; /* Field Replaceable Unit Code - not used */ u8 bit_ptr:3; /* indicates which byte of the CDB or parameter data * was in error */ u8 BPV:1; /* bit pointer valid (BPV): 1- indicates that * the bit_ptr field has valid value */ u8 reserved2:2; u8 CD:1; /* command data bit: 1- illegal parameter in CDB. * 0- illegal parameter in data. */ u8 SKSV:1; u8 field_ptr[2]; /* byte of the CDB or parameter data in error */ }; struct fsa_dev_info { u64 last; u64 size; u32 type; u32 config_waiting_on; unsigned long config_waiting_stamp; u16 queue_depth; u8 config_needed; u8 valid; u8 ro; u8 locked; u8 deleted; char devname[8]; struct sense_data sense_data; u32 block_size; u8 identifier[16]; }; struct fib { void *next; /* this is used by the allocator */ s16 type; s16 size; /* * The Adapter that this I/O is destined for. */ struct aac_dev *dev; /* * This is the event the sendfib routine will wait on if the * caller did not pass one and this is synch io. */ struct completion event_wait; spinlock_t event_lock; u32 done; /* gets set to 1 when fib is complete */ fib_callback callback; void *callback_data; u32 flags; // u32 dmb was ulong /* * And for the internal issue/reply queues (we may be able * to merge these two) */ struct list_head fiblink; void *data; u32 vector_no; struct hw_fib *hw_fib_va; /* also used for native */ dma_addr_t hw_fib_pa; /* physical address of hw_fib*/ dma_addr_t hw_sgl_pa; /* extra sgl for native */ dma_addr_t hw_error_pa; /* error buffer for native */ u32 hbacmd_size; /* cmd size for native */ }; #define AAC_INIT 0 #define AAC_RESCAN 1 #define AAC_DEVTYPE_RAID_MEMBER 1 #define AAC_DEVTYPE_ARC_RAW 2 #define AAC_DEVTYPE_NATIVE_RAW 3 #define AAC_RESCAN_DELAY (10 * HZ) struct aac_hba_map_info { __le32 rmw_nexus; /* nexus for native HBA devices */ u8 devtype; /* device type */ s8 reset_state; /* 0 - no reset, 1..x - */ /* after xth TM LUN reset */ u16 qd_limit; u32 scan_counter; struct aac_ciss_identify_pd *safw_identify_resp; }; /* * Adapter Information Block * * This is returned by the RequestAdapterInfo block */ struct aac_adapter_info { __le32 platform; __le32 cpu; __le32 subcpu; __le32 clock; __le32 execmem; __le32 buffermem; __le32 totalmem; __le32 kernelrev; __le32 kernelbuild; __le32 monitorrev; __le32 monitorbuild; __le32 hwrev; __le32 hwbuild; __le32 biosrev; __le32 biosbuild; __le32 cluster; __le32 clusterchannelmask; __le32 serial[2]; __le32 battery; __le32 options; __le32 OEM; }; struct aac_supplement_adapter_info { u8 adapter_type_text[17+1]; u8 pad[2]; __le32 flash_memory_byte_size; __le32 flash_image_id; __le32 max_number_ports; __le32 version; __le32 feature_bits; u8 slot_number; u8 reserved_pad0[3]; u8 build_date[12]; __le32 current_number_ports; struct { u8 assembly_pn[8]; u8 fru_pn[8]; u8 battery_fru_pn[8]; u8 ec_version_string[8]; u8 tsid[12]; } vpd_info; __le32 flash_firmware_revision; __le32 flash_firmware_build; __le32 raid_type_morph_options; __le32 flash_firmware_boot_revision; __le32 flash_firmware_boot_build; u8 mfg_pcba_serial_no[12]; u8 mfg_wwn_name[8]; __le32 supported_options2; __le32 struct_expansion; /* StructExpansion == 1 */ __le32 feature_bits3; __le32 supported_performance_modes; u8 host_bus_type; /* uses HOST_BUS_TYPE_xxx defines */ u8 host_bus_width; /* actual width in bits or links */ u16 host_bus_speed; /* actual bus speed/link rate in MHz */ u8 max_rrc_drives; /* max. number of ITP-RRC drives/pool */ u8 max_disk_xtasks; /* max. possible num of DiskX Tasks */ u8 cpld_ver_loaded; u8 cpld_ver_in_flash; __le64 max_rrc_capacity; __le32 compiled_max_hist_log_level; u8 custom_board_name[12]; u16 supported_cntlr_mode; /* identify supported controller mode */ u16 reserved_for_future16; __le32 supported_options3; /* reserved for future options */ __le16 virt_device_bus; /* virt. SCSI device for Thor */ __le16 virt_device_target; __le16 virt_device_lun; __le16 unused; __le32 reserved_for_future_growth[68]; }; #define AAC_FEATURE_FALCON cpu_to_le32(0x00000010) #define AAC_FEATURE_JBOD cpu_to_le32(0x08000000) /* SupportedOptions2 */ #define AAC_OPTION_MU_RESET cpu_to_le32(0x00000001) #define AAC_OPTION_IGNORE_RESET cpu_to_le32(0x00000002) #define AAC_OPTION_POWER_MANAGEMENT cpu_to_le32(0x00000004) #define AAC_OPTION_DOORBELL_RESET cpu_to_le32(0x00004000) /* 4KB sector size */ #define AAC_OPTION_VARIABLE_BLOCK_SIZE cpu_to_le32(0x00040000) /* 240 simple volume support */ #define AAC_OPTION_SUPPORTED_240_VOLUMES cpu_to_le32(0x10000000) /* * Supports FIB dump sync command send prior to IOP_RESET */ #define AAC_OPTION_SUPPORTED3_IOP_RESET_FIB_DUMP cpu_to_le32(0x00004000) #define AAC_SIS_VERSION_V3 3 #define AAC_SIS_SLOT_UNKNOWN 0xFF #define GetBusInfo 0x00000009 struct aac_bus_info { __le32 Command; /* VM_Ioctl */ __le32 ObjType; /* FT_DRIVE */ __le32 MethodId; /* 1 = SCSI Layer */ __le32 ObjectId; /* Handle */ __le32 CtlCmd; /* GetBusInfo */ }; struct aac_bus_info_response { __le32 Status; /* ST_OK */ __le32 ObjType; __le32 MethodId; /* unused */ __le32 ObjectId; /* unused */ __le32 CtlCmd; /* unused */ __le32 ProbeComplete; __le32 BusCount; __le32 TargetsPerBus; u8 InitiatorBusId[10]; u8 BusValid[10]; }; /* * Battery platforms */ #define AAC_BAT_REQ_PRESENT (1) #define AAC_BAT_REQ_NOTPRESENT (2) #define AAC_BAT_OPT_PRESENT (3) #define AAC_BAT_OPT_NOTPRESENT (4) #define AAC_BAT_NOT_SUPPORTED (5) /* * cpu types */ #define AAC_CPU_SIMULATOR (1) #define AAC_CPU_I960 (2) #define AAC_CPU_STRONGARM (3) /* * Supported Options */ #define AAC_OPT_SNAPSHOT cpu_to_le32(1) #define AAC_OPT_CLUSTERS cpu_to_le32(1<<1) #define AAC_OPT_WRITE_CACHE cpu_to_le32(1<<2) #define AAC_OPT_64BIT_DATA cpu_to_le32(1<<3) #define AAC_OPT_HOST_TIME_FIB cpu_to_le32(1<<4) #define AAC_OPT_RAID50 cpu_to_le32(1<<5) #define AAC_OPT_4GB_WINDOW cpu_to_le32(1<<6) #define AAC_OPT_SCSI_UPGRADEABLE cpu_to_le32(1<<7) #define AAC_OPT_SOFT_ERR_REPORT cpu_to_le32(1<<8) #define AAC_OPT_SUPPORTED_RECONDITION cpu_to_le32(1<<9) #define AAC_OPT_SGMAP_HOST64 cpu_to_le32(1<<10) #define AAC_OPT_ALARM cpu_to_le32(1<<11) #define AAC_OPT_NONDASD cpu_to_le32(1<<12) #define AAC_OPT_SCSI_MANAGED cpu_to_le32(1<<13) #define AAC_OPT_RAID_SCSI_MODE cpu_to_le32(1<<14) #define AAC_OPT_SUPPLEMENT_ADAPTER_INFO cpu_to_le32(1<<16) #define AAC_OPT_NEW_COMM cpu_to_le32(1<<17) #define AAC_OPT_NEW_COMM_64 cpu_to_le32(1<<18) #define AAC_OPT_EXTENDED cpu_to_le32(1<<23) #define AAC_OPT_NATIVE_HBA cpu_to_le32(1<<25) #define AAC_OPT_NEW_COMM_TYPE1 cpu_to_le32(1<<28) #define AAC_OPT_NEW_COMM_TYPE2 cpu_to_le32(1<<29) #define AAC_OPT_NEW_COMM_TYPE3 cpu_to_le32(1<<30) #define AAC_OPT_NEW_COMM_TYPE4 cpu_to_le32(1<<31) #define AAC_COMM_PRODUCER 0 #define AAC_COMM_MESSAGE 1 #define AAC_COMM_MESSAGE_TYPE1 3 #define AAC_COMM_MESSAGE_TYPE2 4 #define AAC_COMM_MESSAGE_TYPE3 5 #define AAC_EXTOPT_SA_FIRMWARE cpu_to_le32(1<<1) #define AAC_EXTOPT_SOFT_RESET cpu_to_le32(1<<16) /* MSIX context */ struct aac_msix_ctx { int vector_no; struct aac_dev *dev; }; struct aac_dev { struct list_head entry; const char *name; int id; /* * negotiated FIB settings */ unsigned int max_fib_size; unsigned int sg_tablesize; unsigned int max_num_aif; unsigned int max_cmd_size; /* max_fib_size or MAX_NATIVE */ /* * Map for 128 fib objects (64k) */ dma_addr_t hw_fib_pa; /* also used for native cmd */ struct hw_fib *hw_fib_va; /* also used for native cmd */ struct hw_fib *aif_base_va; /* * Fib Headers */ struct fib *fibs; struct fib *free_fib; spinlock_t fib_lock; struct mutex ioctl_mutex; struct mutex scan_mutex; struct aac_queue_block *queues; /* * The user API will use an IOCTL to register itself to receive * FIBs from the adapter. The following list is used to keep * track of all the threads that have requested these FIBs. The * mutex is used to synchronize access to all data associated * with the adapter fibs. */ struct list_head fib_list; struct adapter_ops a_ops; unsigned long fsrev; /* Main driver's revision number */ resource_size_t base_start; /* main IO base */ resource_size_t dbg_base; /* address of UART * debug buffer */ resource_size_t base_size, dbg_size; /* Size of * mapped in region */ /* * Holds initialization info * to communicate with adapter */ union aac_init *init; dma_addr_t init_pa; /* Holds physical address of the init struct */ /* response queue (if AAC_COMM_MESSAGE_TYPE1) */ __le32 *host_rrq; dma_addr_t host_rrq_pa; /* phys. address */ /* index into rrq buffer */ u32 host_rrq_idx[AAC_MAX_MSIX]; atomic_t rrq_outstanding[AAC_MAX_MSIX]; u32 fibs_pushed_no; struct pci_dev *pdev; /* Our PCI interface */ /* pointer to buffer used for printf's from the adapter */ void *printfbuf; void *comm_addr; /* Base address of Comm area */ dma_addr_t comm_phys; /* Physical Address of Comm area */ size_t comm_size; struct Scsi_Host *scsi_host_ptr; int maximum_num_containers; int maximum_num_physicals; int maximum_num_channels; struct fsa_dev_info *fsa_dev; struct task_struct *thread; struct delayed_work safw_rescan_work; struct delayed_work src_reinit_aif_worker; int cardtype; /* *This lock will protect the two 32-bit *writes to the Inbound Queue */ spinlock_t iq_lock; /* * The following is the device specific extension. */ #ifndef AAC_MIN_FOOTPRINT_SIZE # define AAC_MIN_FOOTPRINT_SIZE 8192 # define AAC_MIN_SRC_BAR0_SIZE 0x400000 # define AAC_MIN_SRC_BAR1_SIZE 0x800 # define AAC_MIN_SRCV_BAR0_SIZE 0x100000 # define AAC_MIN_SRCV_BAR1_SIZE 0x400 #endif union { struct sa_registers __iomem *sa; struct rx_registers __iomem *rx; struct rkt_registers __iomem *rkt; struct { struct src_registers __iomem *bar0; char __iomem *bar1; } src; } regs; volatile void __iomem *base, *dbg_base_mapped; volatile struct rx_inbound __iomem *IndexRegs; u32 OIMR; /* Mask Register Cache */ /* * AIF thread states */ u32 aif_thread; struct aac_adapter_info adapter_info; struct aac_supplement_adapter_info supplement_adapter_info; /* These are in adapter info but they are in the io flow so * lets break them out so we don't have to do an AND to check them */ u8 nondasd_support; u8 jbod; u8 cache_protected; u8 dac_support; u8 needs_dac; u8 raid_scsi_mode; u8 comm_interface; u8 raw_io_interface; u8 raw_io_64; u8 printf_enabled; u8 in_reset; u8 in_soft_reset; u8 msi; u8 sa_firmware; int management_fib_count; spinlock_t manage_lock; spinlock_t sync_lock; int sync_mode; struct fib *sync_fib; struct list_head sync_fib_list; u32 doorbell_mask; u32 max_msix; /* max. MSI-X vectors */ u32 vector_cap; /* MSI-X vector capab.*/ int msi_enabled; /* MSI/MSI-X enabled */ atomic_t msix_counter; u32 scan_counter; struct msix_entry msixentry[AAC_MAX_MSIX]; struct aac_msix_ctx aac_msix[AAC_MAX_MSIX]; /* context */ struct aac_hba_map_info hba_map[AAC_MAX_BUSES][AAC_MAX_TARGETS]; struct aac_ciss_phys_luns_resp *safw_phys_luns; u8 adapter_shutdown; u32 handle_pci_error; bool init_reset; u8 soft_reset_support; }; #define aac_adapter_interrupt(dev) \ (dev)->a_ops.adapter_interrupt(dev) #define aac_adapter_notify(dev, event) \ (dev)->a_ops.adapter_notify(dev, event) #define aac_adapter_disable_int(dev) \ (dev)->a_ops.adapter_disable_int(dev) #define aac_adapter_enable_int(dev) \ (dev)->a_ops.adapter_enable_int(dev) #define aac_adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4) \ (dev)->a_ops.adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4) #define aac_adapter_restart(dev, bled, reset_type) \ ((dev)->a_ops.adapter_restart(dev, bled, reset_type)) #define aac_adapter_start(dev) \ ((dev)->a_ops.adapter_start(dev)) #define aac_adapter_ioremap(dev, size) \ (dev)->a_ops.adapter_ioremap(dev, size) #define aac_adapter_deliver(fib) \ ((fib)->dev)->a_ops.adapter_deliver(fib) #define aac_adapter_bounds(dev,cmd,lba) \ dev->a_ops.adapter_bounds(dev,cmd,lba) #define aac_adapter_read(fib,cmd,lba,count) \ ((fib)->dev)->a_ops.adapter_read(fib,cmd,lba,count) #define aac_adapter_write(fib,cmd,lba,count,fua) \ ((fib)->dev)->a_ops.adapter_write(fib,cmd,lba,count,fua) #define aac_adapter_scsi(fib,cmd) \ ((fib)->dev)->a_ops.adapter_scsi(fib,cmd) #define aac_adapter_comm(dev,comm) \ (dev)->a_ops.adapter_comm(dev, comm) #define FIB_CONTEXT_FLAG_TIMED_OUT (0x00000001) #define FIB_CONTEXT_FLAG (0x00000002) #define FIB_CONTEXT_FLAG_WAIT (0x00000004) #define FIB_CONTEXT_FLAG_FASTRESP (0x00000008) #define FIB_CONTEXT_FLAG_NATIVE_HBA (0x00000010) #define FIB_CONTEXT_FLAG_NATIVE_HBA_TMF (0x00000020) #define FIB_CONTEXT_FLAG_SCSI_CMD (0x00000040) #define FIB_CONTEXT_FLAG_EH_RESET (0x00000080) /* * Define the command values */ #define Null 0 #define GetAttributes 1 #define SetAttributes 2 #define Lookup 3 #define ReadLink 4 #define Read 5 #define Write 6 #define Create 7 #define MakeDirectory 8 #define SymbolicLink 9 #define MakeNode 10 #define Removex 11 #define RemoveDirectoryx 12 #define Rename 13 #define Link 14 #define ReadDirectory 15 #define ReadDirectoryPlus 16 #define FileSystemStatus 17 #define FileSystemInfo 18 #define PathConfigure 19 #define Commit 20 #define Mount 21 #define UnMount 22 #define Newfs 23 #define FsCheck 24 #define FsSync 25 #define SimReadWrite 26 #define SetFileSystemStatus 27 #define BlockRead 28 #define BlockWrite 29 #define NvramIoctl 30 #define FsSyncWait 31 #define ClearArchiveBit 32 #define SetAcl 33 #define GetAcl 34 #define AssignAcl 35 #define FaultInsertion 36 /* Fault Insertion Command */ #define CrazyCache 37 /* Crazycache */ #define MAX_FSACOMMAND_NUM 38 /* * Define the status returns. These are very unixlike although * most are not in fact used */ #define ST_OK 0 #define ST_PERM 1 #define ST_NOENT 2 #define ST_IO 5 #define ST_NXIO 6 #define ST_E2BIG 7 #define ST_MEDERR 8 #define ST_ACCES 13 #define ST_EXIST 17 #define ST_XDEV 18 #define ST_NODEV 19 #define ST_NOTDIR 20 #define ST_ISDIR 21 #define ST_INVAL 22 #define ST_FBIG 27 #define ST_NOSPC 28 #define ST_ROFS 30 #define ST_MLINK 31 #define ST_WOULDBLOCK 35 #define ST_NAMETOOLONG 63 #define ST_NOTEMPTY 66 #define ST_DQUOT 69 #define ST_STALE 70 #define ST_REMOTE 71 #define ST_NOT_READY 72 #define ST_BADHANDLE 10001 #define ST_NOT_SYNC 10002 #define ST_BAD_COOKIE 10003 #define ST_NOTSUPP 10004 #define ST_TOOSMALL 10005 #define ST_SERVERFAULT 10006 #define ST_BADTYPE 10007 #define ST_JUKEBOX 10008 #define ST_NOTMOUNTED 10009 #define ST_MAINTMODE 10010 #define ST_STALEACL 10011 /* * On writes how does the client want the data written. */ #define CACHE_CSTABLE 1 #define CACHE_UNSTABLE 2 /* * Lets the client know at which level the data was committed on * a write request */ #define CMFILE_SYNCH_NVRAM 1 #define CMDATA_SYNCH_NVRAM 2 #define CMFILE_SYNCH 3 #define CMDATA_SYNCH 4 #define CMUNSTABLE 5 #define RIO_TYPE_WRITE 0x0000 #define RIO_TYPE_READ 0x0001 #define RIO_SUREWRITE 0x0008 #define RIO2_IO_TYPE 0x0003 #define RIO2_IO_TYPE_WRITE 0x0000 #define RIO2_IO_TYPE_READ 0x0001 #define RIO2_IO_TYPE_VERIFY 0x0002 #define RIO2_IO_ERROR 0x0004 #define RIO2_IO_SUREWRITE 0x0008 #define RIO2_SGL_CONFORMANT 0x0010 #define RIO2_SG_FORMAT 0xF000 #define RIO2_SG_FORMAT_ARC 0x0000 #define RIO2_SG_FORMAT_SRL 0x1000 #define RIO2_SG_FORMAT_IEEE1212 0x2000 struct aac_read { __le32 command; __le32 cid; __le32 block; __le32 count; struct sgmap sg; // Must be last in struct because it is variable }; struct aac_read64 { __le32 command; __le16 cid; __le16 sector_count; __le32 block; __le16 pad; __le16 flags; struct sgmap64 sg; // Must be last in struct because it is variable }; struct aac_read_reply { __le32 status; __le32 count; }; struct aac_write { __le32 command; __le32 cid; __le32 block; __le32 count; __le32 stable; // Not used struct sgmap sg; // Must be last in struct because it is variable }; struct aac_write64 { __le32 command; __le16 cid; __le16 sector_count; __le32 block; __le16 pad; __le16 flags; struct sgmap64 sg; // Must be last in struct because it is variable }; struct aac_write_reply { __le32 status; __le32 count; __le32 committed; }; struct aac_raw_io { __le32 block[2]; __le32 count; __le16 cid; __le16 flags; /* 00 W, 01 R */ __le16 bpTotal; /* reserved for F/W use */ __le16 bpComplete; /* reserved for F/W use */ struct sgmapraw sg; }; struct aac_raw_io2 { __le32 blockLow; __le32 blockHigh; __le32 byteCount; __le16 cid; __le16 flags; /* RIO2 flags */ __le32 sgeFirstSize; /* size of first sge el. */ __le32 sgeNominalSize; /* size of 2nd sge el. (if conformant) */ u8 sgeCnt; /* only 8 bits required */ u8 bpTotal; /* reserved for F/W use */ u8 bpComplete; /* reserved for F/W use */ u8 sgeFirstIndex; /* reserved for F/W use */ u8 unused[4]; struct sge_ieee1212 sge[]; }; #define CT_FLUSH_CACHE 129 struct aac_synchronize { __le32 command; /* VM_ContainerConfig */ __le32 type; /* CT_FLUSH_CACHE */ __le32 cid; __le32 parm1; __le32 parm2; __le32 parm3; __le32 parm4; __le32 count; /* sizeof(((struct aac_synchronize_reply *)NULL)->data) */ }; struct aac_synchronize_reply { __le32 dummy0; __le32 dummy1; __le32 status; /* CT_OK */ __le32 parm1; __le32 parm2; __le32 parm3; __le32 parm4; __le32 parm5; u8 data[16]; }; #define CT_POWER_MANAGEMENT 245 #define CT_PM_START_UNIT 2 #define CT_PM_STOP_UNIT 3 #define CT_PM_UNIT_IMMEDIATE 1 struct aac_power_management { __le32 command; /* VM_ContainerConfig */ __le32 type; /* CT_POWER_MANAGEMENT */ __le32 sub; /* CT_PM_* */ __le32 cid; __le32 parm; /* CT_PM_sub_* */ }; #define CT_PAUSE_IO 65 #define CT_RELEASE_IO 66 struct aac_pause { __le32 command; /* VM_ContainerConfig */ __le32 type; /* CT_PAUSE_IO */ __le32 timeout; /* 10ms ticks */ __le32 min; __le32 noRescan; __le32 parm3; __le32 parm4; __le32 count; /* sizeof(((struct aac_pause_reply *)NULL)->data) */ }; struct aac_srb { __le32 function; __le32 channel; __le32 id; __le32 lun; __le32 timeout; __le32 flags; __le32 count; // Data xfer size __le32 retry_limit; __le32 cdb_size; u8 cdb[16]; struct sgmap sg; }; /* * This and associated data structs are used by the * ioctl caller and are in cpu order. */ struct user_aac_srb { u32 function; u32 channel; u32 id; u32 lun; u32 timeout; u32 flags; u32 count; // Data xfer size u32 retry_limit; u32 cdb_size; u8 cdb[16]; struct user_sgmap sg; }; #define AAC_SENSE_BUFFERSIZE 30 struct aac_srb_reply { __le32 status; __le32 srb_status; __le32 scsi_status; __le32 data_xfer_length; __le32 sense_data_size; u8 sense_data[AAC_SENSE_BUFFERSIZE]; // Can this be SCSI_SENSE_BUFFERSIZE }; struct aac_srb_unit { struct aac_srb_reply srb_reply; struct aac_srb srb; }; /* * SRB Flags */ #define SRB_NoDataXfer 0x0000 #define SRB_DisableDisconnect 0x0004 #define SRB_DisableSynchTransfer 0x0008 #define SRB_BypassFrozenQueue 0x0010 #define SRB_DisableAutosense 0x0020 #define SRB_DataIn 0x0040 #define SRB_DataOut 0x0080 /* * SRB Functions - set in aac_srb->function */ #define SRBF_ExecuteScsi 0x0000 #define SRBF_ClaimDevice 0x0001 #define SRBF_IO_Control 0x0002 #define SRBF_ReceiveEvent 0x0003 #define SRBF_ReleaseQueue 0x0004 #define SRBF_AttachDevice 0x0005 #define SRBF_ReleaseDevice 0x0006 #define SRBF_Shutdown 0x0007 #define SRBF_Flush 0x0008 #define SRBF_AbortCommand 0x0010 #define SRBF_ReleaseRecovery 0x0011 #define SRBF_ResetBus 0x0012 #define SRBF_ResetDevice 0x0013 #define SRBF_TerminateIO 0x0014 #define SRBF_FlushQueue 0x0015 #define SRBF_RemoveDevice 0x0016 #define SRBF_DomainValidation 0x0017 /* * SRB SCSI Status - set in aac_srb->scsi_status */ #define SRB_STATUS_PENDING 0x00 #define SRB_STATUS_SUCCESS 0x01 #define SRB_STATUS_ABORTED 0x02 #define SRB_STATUS_ABORT_FAILED 0x03 #define SRB_STATUS_ERROR 0x04 #define SRB_STATUS_BUSY 0x05 #define SRB_STATUS_INVALID_REQUEST 0x06 #define SRB_STATUS_INVALID_PATH_ID 0x07 #define SRB_STATUS_NO_DEVICE 0x08 #define SRB_STATUS_TIMEOUT 0x09 #define SRB_STATUS_SELECTION_TIMEOUT 0x0A #define SRB_STATUS_COMMAND_TIMEOUT 0x0B #define SRB_STATUS_MESSAGE_REJECTED 0x0D #define SRB_STATUS_BUS_RESET 0x0E #define SRB_STATUS_PARITY_ERROR 0x0F #define SRB_STATUS_REQUEST_SENSE_FAILED 0x10 #define SRB_STATUS_NO_HBA 0x11 #define SRB_STATUS_DATA_OVERRUN 0x12 #define SRB_STATUS_UNEXPECTED_BUS_FREE 0x13 #define SRB_STATUS_PHASE_SEQUENCE_FAILURE 0x14 #define SRB_STATUS_BAD_SRB_BLOCK_LENGTH 0x15 #define SRB_STATUS_REQUEST_FLUSHED 0x16 #define SRB_STATUS_DELAYED_RETRY 0x17 #define SRB_STATUS_INVALID_LUN 0x20 #define SRB_STATUS_INVALID_TARGET_ID 0x21 #define SRB_STATUS_BAD_FUNCTION 0x22 #define SRB_STATUS_ERROR_RECOVERY 0x23 #define SRB_STATUS_NOT_STARTED 0x24 #define SRB_STATUS_NOT_IN_USE 0x30 #define SRB_STATUS_FORCE_ABORT 0x31 #define SRB_STATUS_DOMAIN_VALIDATION_FAIL 0x32 /* * Object-Server / Volume-Manager Dispatch Classes */ #define VM_Null 0 #define VM_NameServe 1 #define VM_ContainerConfig 2 #define VM_Ioctl 3 #define VM_FilesystemIoctl 4 #define VM_CloseAll 5 #define VM_CtBlockRead 6 #define VM_CtBlockWrite 7 #define VM_SliceBlockRead 8 /* raw access to configured "storage objects" */ #define VM_SliceBlockWrite 9 #define VM_DriveBlockRead 10 /* raw access to physical devices */ #define VM_DriveBlockWrite 11 #define VM_EnclosureMgt 12 /* enclosure management */ #define VM_Unused 13 /* used to be diskset management */ #define VM_CtBlockVerify 14 #define VM_CtPerf 15 /* performance test */ #define VM_CtBlockRead64 16 #define VM_CtBlockWrite64 17 #define VM_CtBlockVerify64 18 #define VM_CtHostRead64 19 #define VM_CtHostWrite64 20 #define VM_DrvErrTblLog 21 #define VM_NameServe64 22 #define VM_NameServeAllBlk 30 #define MAX_VMCOMMAND_NUM 23 /* used for sizing stats array - leave last */ /* * Descriptive information (eg, vital stats) * that a content manager might report. The * FileArray filesystem component is one example * of a content manager. Raw mode might be * another. */ struct aac_fsinfo { __le32 fsTotalSize; /* Consumed by fs, incl. metadata */ __le32 fsBlockSize; __le32 fsFragSize; __le32 fsMaxExtendSize; __le32 fsSpaceUnits; __le32 fsMaxNumFiles; __le32 fsNumFreeFiles; __le32 fsInodeDensity; }; /* valid iff ObjType == FT_FILESYS && !(ContentState & FSCS_NOTCLEAN) */ struct aac_blockdevinfo { __le32 block_size; __le32 logical_phys_map; u8 identifier[16]; }; union aac_contentinfo { struct aac_fsinfo filesys; struct aac_blockdevinfo bdevinfo; }; /* * Query for Container Configuration Status */ #define CT_GET_CONFIG_STATUS 147 struct aac_get_config_status { __le32 command; /* VM_ContainerConfig */ __le32 type; /* CT_GET_CONFIG_STATUS */ __le32 parm1; __le32 parm2; __le32 parm3; __le32 parm4; __le32 parm5; __le32 count; /* sizeof(((struct aac_get_config_status_resp *)NULL)->data) */ }; #define CFACT_CONTINUE 0 #define CFACT_PAUSE 1 #define CFACT_ABORT 2 struct aac_get_config_status_resp { __le32 response; /* ST_OK */ __le32 dummy0; __le32 status; /* CT_OK */ __le32 parm1; __le32 parm2; __le32 parm3; __le32 parm4; __le32 parm5; struct { __le32 action; /* CFACT_CONTINUE, CFACT_PAUSE or CFACT_ABORT */ __le16 flags; __le16 count; } data; }; /* * Accept the configuration as-is */ #define CT_COMMIT_CONFIG 152 struct aac_commit_config { __le32 command; /* VM_ContainerConfig */ __le32 type; /* CT_COMMIT_CONFIG */ }; /* * Query for Container Configuration Status */ #define CT_GET_CONTAINER_COUNT 4 struct aac_get_container_count { __le32 command; /* VM_ContainerConfig */ __le32 type; /* CT_GET_CONTAINER_COUNT */ }; struct aac_get_container_count_resp { __le32 response; /* ST_OK */ __le32 dummy0; __le32 MaxContainers; __le32 ContainerSwitchEntries; __le32 MaxPartitions; __le32 MaxSimpleVolumes; }; /* * Query for "mountable" objects, ie, objects that are typically * associated with a drive letter on the client (host) side. */ struct aac_mntent { __le32 oid; u8 name[16]; /* if applicable */ struct creation_info create_info; /* if applicable */ __le32 capacity; __le32 vol; /* substrate structure */ __le32 obj; /* FT_FILESYS, etc. */ __le32 state; /* unready for mounting, readonly, etc. */ union aac_contentinfo fileinfo; /* Info specific to content manager (eg, filesystem) */ __le32 altoid; /* != oid <==> snapshot or broken mirror exists */ __le32 capacityhigh; }; #define FSCS_NOTCLEAN 0x0001 /* fsck is necessary before mounting */ #define FSCS_READONLY 0x0002 /* possible result of broken mirror */ #define FSCS_HIDDEN 0x0004 /* should be ignored - set during a clear */ #define FSCS_NOT_READY 0x0008 /* Array spinning up to fulfil request */ struct aac_query_mount { __le32 command; __le32 type; __le32 count; }; struct aac_mount { __le32 status; __le32 type; /* should be same as that requested */ __le32 count; struct aac_mntent mnt[1]; }; #define CT_READ_NAME 130 struct aac_get_name { __le32 command; /* VM_ContainerConfig */ __le32 type; /* CT_READ_NAME */ __le32 cid; __le32 parm1; __le32 parm2; __le32 parm3; __le32 parm4; __le32 count; /* sizeof(((struct aac_get_name_resp *)NULL)->data) */ }; struct aac_get_name_resp { __le32 dummy0; __le32 dummy1; __le32 status; /* CT_OK */ __le32 parm1; __le32 parm2; __le32 parm3; __le32 parm4; __le32 parm5; u8 data[17]; }; #define CT_CID_TO_32BITS_UID 165 struct aac_get_serial { __le32 command; /* VM_ContainerConfig */ __le32 type; /* CT_CID_TO_32BITS_UID */ __le32 cid; }; struct aac_get_serial_resp { __le32 dummy0; __le32 dummy1; __le32 status; /* CT_OK */ __le32 uid; }; /* * The following command is sent to shut down each container. */ struct aac_close { __le32 command; __le32 cid; }; struct aac_query_disk { s32 cnum; s32 bus; s32 id; s32 lun; u32 valid; u32 locked; u32 deleted; s32 instance; s8 name[10]; u32 unmapped; }; struct aac_delete_disk { u32 disknum; u32 cnum; }; struct fib_ioctl { u32 fibctx; s32 wait; char __user *fib; }; struct revision { u32 compat; __le32 version; __le32 build; }; /* * Ugly - non Linux like ioctl coding for back compat. */ #define CTL_CODE(function, method) ( \ (4<< 16) | ((function) << 2) | (method) \ ) /* * Define the method codes for how buffers are passed for I/O and FS * controls */ #define METHOD_BUFFERED 0 #define METHOD_NEITHER 3 /* * Filesystem ioctls */ #define FSACTL_SENDFIB CTL_CODE(2050, METHOD_BUFFERED) #define FSACTL_SEND_RAW_SRB CTL_CODE(2067, METHOD_BUFFERED) #define FSACTL_DELETE_DISK 0x163 #define FSACTL_QUERY_DISK 0x173 #define FSACTL_OPEN_GET_ADAPTER_FIB CTL_CODE(2100, METHOD_BUFFERED) #define FSACTL_GET_NEXT_ADAPTER_FIB CTL_CODE(2101, METHOD_BUFFERED) #define FSACTL_CLOSE_GET_ADAPTER_FIB CTL_CODE(2102, METHOD_BUFFERED) #define FSACTL_MINIPORT_REV_CHECK CTL_CODE(2107, METHOD_BUFFERED) #define FSACTL_GET_PCI_INFO CTL_CODE(2119, METHOD_BUFFERED) #define FSACTL_FORCE_DELETE_DISK CTL_CODE(2120, METHOD_NEITHER) #define FSACTL_GET_CONTAINERS 2131 #define FSACTL_SEND_LARGE_FIB CTL_CODE(2138, METHOD_BUFFERED) #define FSACTL_RESET_IOP CTL_CODE(2140, METHOD_BUFFERED) #define FSACTL_GET_HBA_INFO CTL_CODE(2150, METHOD_BUFFERED) /* flags defined for IOP & HW SOFT RESET */ #define HW_IOP_RESET 0x01 #define HW_SOFT_RESET 0x02 #define IOP_HWSOFT_RESET (HW_IOP_RESET | HW_SOFT_RESET) /* HW Soft Reset register offset */ #define IBW_SWR_OFFSET 0x4000 #define SOFT_RESET_TIME 60 struct aac_common { /* * If this value is set to 1 then interrupt moderation will occur * in the base commuication support. */ u32 irq_mod; u32 peak_fibs; u32 zero_fibs; u32 fib_timeouts; /* * Statistical counters in debug mode */ #ifdef DBG u32 FibsSent; u32 FibRecved; u32 NativeSent; u32 NativeRecved; u32 NoResponseSent; u32 NoResponseRecved; u32 AsyncSent; u32 AsyncRecved; u32 NormalSent; u32 NormalRecved; #endif }; extern struct aac_common aac_config; /* * This is for management ioctl purpose only. */ struct aac_hba_info { u8 driver_name[50]; u8 adapter_number; u8 system_io_bus_number; u8 device_number; u32 function_number; u32 vendor_id; u32 device_id; u32 sub_vendor_id; u32 sub_system_id; u32 mapped_base_address_size; u32 base_physical_address_high_part; u32 base_physical_address_low_part; u32 max_command_size; u32 max_fib_size; u32 max_scatter_gather_from_os; u32 max_scatter_gather_to_fw; u32 max_outstanding_fibs; u32 queue_start_threshold; u32 queue_dump_threshold; u32 max_io_size_queued; u32 outstanding_io; u32 firmware_build_number; u32 bios_build_number; u32 driver_build_number; u32 serial_number_high_part; u32 serial_number_low_part; u32 supported_options; u32 feature_bits; u32 currentnumber_ports; u8 new_comm_interface:1; u8 new_commands_supported:1; u8 disable_passthrough:1; u8 expose_non_dasd:1; u8 queue_allowed:1; u8 bled_check_enabled:1; u8 reserved1:1; u8 reserted2:1; u32 reserved3[10]; }; /* * The following macro is used when sending and receiving FIBs. It is * only used for debugging. */ #ifdef DBG #define FIB_COUNTER_INCREMENT(counter) (counter)++ #else #define FIB_COUNTER_INCREMENT(counter) #endif /* * Adapter direct commands * Monitor/Kernel API */ #define BREAKPOINT_REQUEST 0x00000004 #define INIT_STRUCT_BASE_ADDRESS 0x00000005 #define READ_PERMANENT_PARAMETERS 0x0000000a #define WRITE_PERMANENT_PARAMETERS 0x0000000b #define HOST_CRASHING 0x0000000d #define SEND_SYNCHRONOUS_FIB 0x0000000c #define COMMAND_POST_RESULTS 0x00000014 #define GET_ADAPTER_PROPERTIES 0x00000019 #define GET_DRIVER_BUFFER_PROPERTIES 0x00000023 #define RCV_TEMP_READINGS 0x00000025 #define GET_COMM_PREFERRED_SETTINGS 0x00000026 #define IOP_RESET_FW_FIB_DUMP 0x00000034 #define DROP_IO 0x00000035 #define IOP_RESET 0x00001000 #define IOP_RESET_ALWAYS 0x00001001 #define RE_INIT_ADAPTER 0x000000ee #define IOP_SRC_RESET_MASK 0x00000100 /* * Adapter Status Register * * Phase Staus mailbox is 32bits: * <31:16> = Phase Status * <15:0> = Phase * * The adapter reports is present state through the phase. Only * a single phase should be ever be set. Each phase can have multiple * phase status bits to provide more detailed information about the * state of the board. Care should be taken to ensure that any phase * status bits that are set when changing the phase are also valid * for the new phase or be cleared out. Adapter software (monitor, * iflash, kernel) is responsible for properly maintining the phase * status mailbox when it is running. * * MONKER_API Phases * * Phases are bit oriented. It is NOT valid to have multiple bits set */ #define SELF_TEST_FAILED 0x00000004 #define MONITOR_PANIC 0x00000020 #define KERNEL_BOOTING 0x00000040 #define KERNEL_UP_AND_RUNNING 0x00000080 #define KERNEL_PANIC 0x00000100 #define FLASH_UPD_PENDING 0x00002000 #define FLASH_UPD_SUCCESS 0x00004000 #define FLASH_UPD_FAILED 0x00008000 #define INVALID_OMR 0xffffffff #define FWUPD_TIMEOUT (5 * 60) /* * Doorbell bit defines */ #define DoorBellSyncCmdAvailable (1<<0) /* Host -> Adapter */ #define DoorBellPrintfDone (1<<5) /* Host -> Adapter */ #define DoorBellAdapterNormCmdReady (1<<1) /* Adapter -> Host */ #define DoorBellAdapterNormRespReady (1<<2) /* Adapter -> Host */ #define DoorBellAdapterNormCmdNotFull (1<<3) /* Adapter -> Host */ #define DoorBellAdapterNormRespNotFull (1<<4) /* Adapter -> Host */ #define DoorBellPrintfReady (1<<5) /* Adapter -> Host */ #define DoorBellAifPending (1<<6) /* Adapter -> Host */ /* PMC specific outbound doorbell bits */ #define PmDoorBellResponseSent (1<<1) /* Adapter -> Host */ /* * For FIB communication, we need all of the following things * to send back to the user. */ #define AifCmdEventNotify 1 /* Notify of event */ #define AifEnConfigChange 3 /* Adapter configuration change */ #define AifEnContainerChange 4 /* Container configuration change */ #define AifEnDeviceFailure 5 /* SCSI device failed */ #define AifEnEnclosureManagement 13 /* EM_DRIVE_* */ #define EM_DRIVE_INSERTION 31 #define EM_DRIVE_REMOVAL 32 #define EM_SES_DRIVE_INSERTION 33 #define EM_SES_DRIVE_REMOVAL 26 #define AifEnBatteryEvent 14 /* Change in Battery State */ #define AifEnAddContainer 15 /* A new array was created */ #define AifEnDeleteContainer 16 /* A container was deleted */ #define AifEnExpEvent 23 /* Firmware Event Log */ #define AifExeFirmwarePanic 3 /* Firmware Event Panic */ #define AifHighPriority 3 /* Highest Priority Event */ #define AifEnAddJBOD 30 /* JBOD created */ #define AifEnDeleteJBOD 31 /* JBOD deleted */ #define AifBuManagerEvent 42 /* Bu management*/ #define AifBuCacheDataLoss 10 #define AifBuCacheDataRecover 11 #define AifCmdJobProgress 2 /* Progress report */ #define AifJobCtrZero 101 /* Array Zero progress */ #define AifJobStsSuccess 1 /* Job completes */ #define AifJobStsRunning 102 /* Job running */ #define AifCmdAPIReport 3 /* Report from other user of API */ #define AifCmdDriverNotify 4 /* Notify host driver of event */ #define AifDenMorphComplete 200 /* A morph operation completed */ #define AifDenVolumeExtendComplete 201 /* A volume extend completed */ #define AifReqJobList 100 /* Gets back complete job list */ #define AifReqJobsForCtr 101 /* Gets back jobs for specific container */ #define AifReqJobsForScsi 102 /* Gets back jobs for specific SCSI device */ #define AifReqJobReport 103 /* Gets back a specific job report or list of them */ #define AifReqTerminateJob 104 /* Terminates job */ #define AifReqSuspendJob 105 /* Suspends a job */ #define AifReqResumeJob 106 /* Resumes a job */ #define AifReqSendAPIReport 107 /* API generic report requests */ #define AifReqAPIJobStart 108 /* Start a job from the API */ #define AifReqAPIJobUpdate 109 /* Update a job report from the API */ #define AifReqAPIJobFinish 110 /* Finish a job from the API */ /* PMC NEW COMM: Request the event data */ #define AifReqEvent 200 #define AifRawDeviceRemove 203 /* RAW device deleted */ #define AifNativeDeviceAdd 204 /* native HBA device added */ #define AifNativeDeviceRemove 205 /* native HBA device removed */ /* * Adapter Initiated FIB command structures. Start with the adapter * initiated FIBs that really come from the adapter, and get responded * to by the host. */ struct aac_aifcmd { __le32 command; /* Tell host what type of notify this is */ __le32 seqnum; /* To allow ordering of reports (if necessary) */ u8 data[]; /* Undefined length (from kernel viewpoint) */ }; /** * Convert capacity to cylinders * accounting for the fact capacity could be a 64 bit value * */ static inline unsigned int cap_to_cyls(sector_t capacity, unsigned divisor) { sector_div(capacity, divisor); return capacity; } static inline int aac_pci_offline(struct aac_dev *dev) { return pci_channel_offline(dev->pdev) || dev->handle_pci_error; } static inline int aac_adapter_check_health(struct aac_dev *dev) { if (unlikely(aac_pci_offline(dev))) return -1; return (dev)->a_ops.adapter_check_health(dev); } int aac_scan_host(struct aac_dev *dev); static inline void aac_schedule_safw_scan_worker(struct aac_dev *dev) { schedule_delayed_work(&dev->safw_rescan_work, AAC_RESCAN_DELAY); } static inline void aac_schedule_src_reinit_aif_worker(struct aac_dev *dev) { schedule_delayed_work(&dev->src_reinit_aif_worker, AAC_RESCAN_DELAY); } static inline void aac_safw_rescan_worker(struct work_struct *work) { struct aac_dev *dev = container_of(to_delayed_work(work), struct aac_dev, safw_rescan_work); wait_event(dev->scsi_host_ptr->host_wait, !scsi_host_in_recovery(dev->scsi_host_ptr)); aac_scan_host(dev); } static inline void aac_cancel_rescan_worker(struct aac_dev *dev) { cancel_delayed_work_sync(&dev->safw_rescan_work); cancel_delayed_work_sync(&dev->src_reinit_aif_worker); } enum aac_cmd_owner { AAC_OWNER_MIDLEVEL = 0x101, AAC_OWNER_LOWLEVEL = 0x102, AAC_OWNER_ERROR_HANDLER = 0x103, AAC_OWNER_FIRMWARE = 0x106, }; struct aac_cmd_priv { int (*callback)(struct scsi_cmnd *); int status; enum aac_cmd_owner owner; bool sent_command; }; static inline struct aac_cmd_priv *aac_priv(struct scsi_cmnd *cmd) { return scsi_cmd_priv(cmd); } void aac_safw_rescan_worker(struct work_struct *work); void aac_src_reinit_aif_worker(struct work_struct *work); int aac_acquire_irq(struct aac_dev *dev); void aac_free_irq(struct aac_dev *dev); int aac_setup_safw_adapter(struct aac_dev *dev); const char *aac_driverinfo(struct Scsi_Host *); void aac_fib_vector_assign(struct aac_dev *dev); struct fib *aac_fib_alloc(struct aac_dev *dev); struct fib *aac_fib_alloc_tag(struct aac_dev *dev, struct scsi_cmnd *scmd); int aac_fib_setup(struct aac_dev *dev); void aac_fib_map_free(struct aac_dev *dev); void aac_fib_free(struct fib * context); void aac_fib_init(struct fib * context); void aac_printf(struct aac_dev *dev, u32 val); int aac_fib_send(u16 command, struct fib * context, unsigned long size, int priority, int wait, int reply, fib_callback callback, void *ctxt); int aac_hba_send(u8 command, struct fib *context, fib_callback callback, void *ctxt); int aac_consumer_get(struct aac_dev * dev, struct aac_queue * q, struct aac_entry **entry); void aac_consumer_free(struct aac_dev * dev, struct aac_queue * q, u32 qnum); int aac_fib_complete(struct fib * context); void aac_hba_callback(void *context, struct fib *fibptr); #define fib_data(fibctx) ((void *)(fibctx)->hw_fib_va->data) struct aac_dev *aac_init_adapter(struct aac_dev *dev); void aac_src_access_devreg(struct aac_dev *dev, int mode); void aac_set_intx_mode(struct aac_dev *dev); int aac_get_config_status(struct aac_dev *dev, int commit_flag); int aac_get_containers(struct aac_dev *dev); int aac_scsi_cmd(struct scsi_cmnd *cmd); int aac_dev_ioctl(struct aac_dev *dev, unsigned int cmd, void __user *arg); #ifndef shost_to_class #define shost_to_class(shost) &shost->shost_dev #endif ssize_t aac_get_serial_number(struct device *dev, char *buf); int aac_do_ioctl(struct aac_dev *dev, unsigned int cmd, void __user *arg); int aac_rx_init(struct aac_dev *dev); int aac_rkt_init(struct aac_dev *dev); int aac_nark_init(struct aac_dev *dev); int aac_sa_init(struct aac_dev *dev); int aac_src_init(struct aac_dev *dev); int aac_srcv_init(struct aac_dev *dev); int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify); void aac_define_int_mode(struct aac_dev *dev); unsigned int aac_response_normal(struct aac_queue * q); unsigned int aac_command_normal(struct aac_queue * q); unsigned int aac_intr_normal(struct aac_dev *dev, u32 Index, int isAif, int isFastResponse, struct hw_fib *aif_fib); int aac_reset_adapter(struct aac_dev *dev, int forced, u8 reset_type); int aac_check_health(struct aac_dev * dev); int aac_command_thread(void *data); int aac_close_fib_context(struct aac_dev * dev, struct aac_fib_context *fibctx); int aac_fib_adapter_complete(struct fib * fibptr, unsigned short size); struct aac_driver_ident* aac_get_driver_ident(int devtype); int aac_get_adapter_info(struct aac_dev* dev); int aac_send_shutdown(struct aac_dev *dev); int aac_probe_container(struct aac_dev *dev, int cid); int _aac_rx_init(struct aac_dev *dev); int aac_rx_select_comm(struct aac_dev *dev, int comm); int aac_rx_deliver_producer(struct fib * fib); void aac_reinit_aif(struct aac_dev *aac, unsigned int index); static inline int aac_is_src(struct aac_dev *dev) { u16 device = dev->pdev->device; if (device == PMC_DEVICE_S6 || device == PMC_DEVICE_S7 || device == PMC_DEVICE_S8) return 1; return 0; } static inline int aac_supports_2T(struct aac_dev *dev) { return (dev->adapter_info.options & AAC_OPT_NEW_COMM_64); } char * get_container_type(unsigned type); extern int numacb; extern char aac_driver_version[]; extern int startup_timeout; extern int aif_timeout; extern int expose_physicals; extern int aac_reset_devices; extern int aac_msi; extern int aac_commit; extern int update_interval; extern int check_interval; extern int aac_check_reset; extern int aac_fib_dump; #endif