/* * Broadcom specific Advanced Microcontroller Bus * Broadcom USB-core driver (BCMA bus glue) * * Copyright 2011-2012 Hauke Mehrtens * * Based on ssb-ohci driver * Copyright 2007 Michael Buesch * * Derived from the OHCI-PCI driver * Copyright 1999 Roman Weissgaerber * Copyright 2000-2002 David Brownell * Copyright 1999 Linus Torvalds * Copyright 1999 Gregory P. Smith * * Derived from the USBcore related parts of Broadcom-SB * Copyright 2005-2011 Broadcom Corporation * * Licensed under the GNU/GPL. See COPYING for details. */ #include #include #include #include #include #include MODULE_AUTHOR("Hauke Mehrtens"); MODULE_DESCRIPTION("Common USB driver for BCMA Bus"); MODULE_LICENSE("GPL"); struct bcma_hcd_device { struct platform_device *ehci_dev; struct platform_device *ohci_dev; }; /* Wait for bitmask in a register to get set or cleared. * timeout is in units of ten-microseconds. */ static int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask, int timeout) { int i; u32 val; for (i = 0; i < timeout; i++) { val = bcma_read32(dev, reg); if ((val & bitmask) == bitmask) return 0; udelay(10); } return -ETIMEDOUT; } static void __devinit bcma_hcd_4716wa(struct bcma_device *dev) { #ifdef CONFIG_BCMA_DRIVER_MIPS /* Work around for 4716 failures. */ if (dev->bus->chipinfo.id == 0x4716) { u32 tmp; tmp = bcma_cpu_clock(&dev->bus->drv_mips); if (tmp >= 480000000) tmp = 0x1846b; /* set CDR to 0x11(fast) */ else if (tmp == 453000000) tmp = 0x1046b; /* set CDR to 0x10(slow) */ else tmp = 0; /* Change Shim mdio control reg to fix host not acking at * high frequencies */ if (tmp) { bcma_write32(dev, 0x524, 0x1); /* write sel to enable */ udelay(500); bcma_write32(dev, 0x524, tmp); udelay(500); bcma_write32(dev, 0x524, 0x4ab); udelay(500); bcma_read32(dev, 0x528); bcma_write32(dev, 0x528, 0x80000000); } } #endif /* CONFIG_BCMA_DRIVER_MIPS */ } /* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */ static void __devinit bcma_hcd_init_chip(struct bcma_device *dev) { u32 tmp; /* * USB 2.0 special considerations: * * 1. Since the core supports both OHCI and EHCI functions, it must * only be reset once. * * 2. In addition to the standard SI reset sequence, the Host Control * Register must be programmed to bring the USB core and various * phy components out of reset. */ if (!bcma_core_is_enabled(dev)) { bcma_core_enable(dev, 0); mdelay(10); if (dev->id.rev >= 5) { /* Enable Misc PLL */ tmp = bcma_read32(dev, 0x1e0); tmp |= 0x100; bcma_write32(dev, 0x1e0, tmp); if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100)) printk(KERN_EMERG "Failed to enable misc PPL!\n"); /* Take out of resets */ bcma_write32(dev, 0x200, 0x4ff); udelay(25); bcma_write32(dev, 0x200, 0x6ff); udelay(25); /* Make sure digital and AFE are locked in USB PHY */ bcma_write32(dev, 0x524, 0x6b); udelay(50); tmp = bcma_read32(dev, 0x524); udelay(50); bcma_write32(dev, 0x524, 0xab); udelay(50); tmp = bcma_read32(dev, 0x524); udelay(50); bcma_write32(dev, 0x524, 0x2b); udelay(50); tmp = bcma_read32(dev, 0x524); udelay(50); bcma_write32(dev, 0x524, 0x10ab); udelay(50); tmp = bcma_read32(dev, 0x524); if (bcma_wait_bits(dev, 0x528, 0xc000, 10000)) { tmp = bcma_read32(dev, 0x528); printk(KERN_EMERG "USB20H mdio_rddata 0x%08x\n", tmp); } bcma_write32(dev, 0x528, 0x80000000); tmp = bcma_read32(dev, 0x314); udelay(265); bcma_write32(dev, 0x200, 0x7ff); udelay(10); /* Take USB and HSIC out of non-driving modes */ bcma_write32(dev, 0x510, 0); } else { bcma_write32(dev, 0x200, 0x7ff); udelay(1); } bcma_hcd_4716wa(dev); } } static const struct usb_ehci_pdata ehci_pdata = { }; static const struct usb_ohci_pdata ohci_pdata = { }; static struct platform_device * __devinit bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr) { struct platform_device *hci_dev; struct resource hci_res[2]; int ret = -ENOMEM; memset(hci_res, 0, sizeof(hci_res)); hci_res[0].start = addr; hci_res[0].end = hci_res[0].start + 0x1000 - 1; hci_res[0].flags = IORESOURCE_MEM; hci_res[1].start = dev->irq; hci_res[1].flags = IORESOURCE_IRQ; hci_dev = platform_device_alloc(ohci ? "ohci-platform" : "ehci-platform" , 0); if (!hci_dev) return NULL; hci_dev->dev.parent = &dev->dev; hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask; ret = platform_device_add_resources(hci_dev, hci_res, ARRAY_SIZE(hci_res)); if (ret) goto err_alloc; if (ohci) ret = platform_device_add_data(hci_dev, &ohci_pdata, sizeof(ohci_pdata)); else ret = platform_device_add_data(hci_dev, &ehci_pdata, sizeof(ehci_pdata)); if (ret) goto err_alloc; ret = platform_device_add(hci_dev); if (ret) goto err_alloc; return hci_dev; err_alloc: platform_device_put(hci_dev); return ERR_PTR(ret); } static int __devinit bcma_hcd_probe(struct bcma_device *dev) { int err; u16 chipid_top; u32 ohci_addr; struct bcma_hcd_device *usb_dev; struct bcma_chipinfo *chipinfo; chipinfo = &dev->bus->chipinfo; /* USBcores are only connected on embedded devices. */ chipid_top = (chipinfo->id & 0xFF00); if (chipid_top != 0x4700 && chipid_top != 0x5300) return -ENODEV; /* TODO: Probably need checks here; is the core connected? */ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) || dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32))) return -EOPNOTSUPP; usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL); if (!usb_dev) return -ENOMEM; bcma_hcd_init_chip(dev); /* In AI chips EHCI is addrspace 0, OHCI is 1 */ ohci_addr = dev->addr1; if ((chipinfo->id == 0x5357 || chipinfo->id == 0x4749) && chipinfo->rev == 0) ohci_addr = 0x18009000; usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, true, ohci_addr); if (IS_ERR(usb_dev->ohci_dev)) { err = PTR_ERR(usb_dev->ohci_dev); goto err_free_usb_dev; } usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, false, dev->addr); if (IS_ERR(usb_dev->ehci_dev)) { err = PTR_ERR(usb_dev->ehci_dev); goto err_unregister_ohci_dev; } bcma_set_drvdata(dev, usb_dev); return 0; err_unregister_ohci_dev: platform_device_unregister(usb_dev->ohci_dev); err_free_usb_dev: kfree(usb_dev); return err; } static void __devexit bcma_hcd_remove(struct bcma_device *dev) { struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev); struct platform_device *ohci_dev = usb_dev->ohci_dev; struct platform_device *ehci_dev = usb_dev->ehci_dev; if (ohci_dev) platform_device_unregister(ohci_dev); if (ehci_dev) platform_device_unregister(ehci_dev); bcma_core_disable(dev, 0); } static void bcma_hcd_shutdown(struct bcma_device *dev) { bcma_core_disable(dev, 0); } #ifdef CONFIG_PM static int bcma_hcd_suspend(struct bcma_device *dev, pm_message_t state) { bcma_core_disable(dev, 0); return 0; } static int bcma_hcd_resume(struct bcma_device *dev) { bcma_core_enable(dev, 0); return 0; } #else /* !CONFIG_PM */ #define bcma_hcd_suspend NULL #define bcma_hcd_resume NULL #endif /* CONFIG_PM */ static const struct bcma_device_id bcma_hcd_table[] __devinitconst = { BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS), BCMA_CORETABLE_END }; MODULE_DEVICE_TABLE(bcma, bcma_hcd_table); static struct bcma_driver bcma_hcd_driver = { .name = KBUILD_MODNAME, .id_table = bcma_hcd_table, .probe = bcma_hcd_probe, .remove = __devexit_p(bcma_hcd_remove), .shutdown = bcma_hcd_shutdown, .suspend = bcma_hcd_suspend, .resume = bcma_hcd_resume, }; static int __init bcma_hcd_init(void) { return bcma_driver_register(&bcma_hcd_driver); } module_init(bcma_hcd_init); static void __exit bcma_hcd_exit(void) { bcma_driver_unregister(&bcma_hcd_driver); } module_exit(bcma_hcd_exit);