libata: add command name parsing for error output

This patch improve libata's output for error/notification messages
to allow easier comprehension and debugging:

When ATAPI commands issued through the SCSI layer fail, use SCSI
functions to print the CDB in human-readable form instead of just
dumping out the CDB in hex.

Print out the name of the failed command (as defined by the ATA
specification) in error handling output along with the raw register
contents.

When reporting status of ACPI taskfile commands executed on resume,
also output the names of the commands being executed (or not) in
readable form.

Since the extra data for printing command names increases kernel
size slightly, a config option has been added to allow disabling
command name output (as well as some of the error register parsing)
for those highly sensitive to kernel text size.

Signed-off-by: Robert Hancock <hancockrwd@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

5 files changed, 174 insertions, 5 deletions

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index b17c57f85032..8e64d3c81d53 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -26,6 +26,17 @@ config ATA_NONSTANDARD
        bool
        default n
 
+config ATA_VERBOSE_ERROR
+	bool "Verbose ATA error reporting"
+	default y
+	help
+	  This option adds parsing of ATA command descriptions and error bits
+	  in libata kernel output, making it easier to interpret.
+	  This option will enlarge the kernel by approx. 6KB. Disable it only
+	  if kernel size is more important than ease of debugging.
+
+	  If unsure, say Y.
+
 config ATA_ACPI
 	bool "ATA ACPI Support"
 	depends on ACPI && PCI
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index ac176da1f94e..01964b6e6f6b 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -689,6 +689,7 @@ static int ata_acpi_run_tf(struct ata_device *dev,
 	struct ata_taskfile tf, ptf, rtf;
 	unsigned int err_mask;
 	const char *level;
+	const char *descr;
 	char msg[60];
 	int rc;
 
@@ -736,11 +737,13 @@ static int ata_acpi_run_tf(struct ata_device *dev,
 		snprintf(msg, sizeof(msg), "filtered out");
 		rc = 0;
 	}
+	descr = ata_get_cmd_descript(tf.command);
 
 	ata_dev_printk(dev, level,
-		       "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x %s\n",
+		       "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x (%s) %s\n",
 		       tf.command, tf.feature, tf.nsect, tf.lbal,
-		       tf.lbam, tf.lbah, tf.device, msg);
+		       tf.lbam, tf.lbah, tf.device,
+		       (descr ? descr : "unknown"), msg);
 
 	return rc;
 }
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 2c34de841e11..a04488f0de88 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -40,6 +40,7 @@
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_dbg.h>
 #include "../scsi/scsi_transport_api.h"
 
 #include <linux/libata.h>
@@ -2112,6 +2113,116 @@ void ata_eh_autopsy(struct ata_port *ap)
 }
 
 /**
+ *	ata_get_cmd_descript - get description for ATA command
+ *	@command: ATA command code to get description for
+ *
+ *	Return a textual description of the given command, or NULL if the
+ *	command is not known.
+ *
+ *	LOCKING:
+ *	None
+ */
+const char *ata_get_cmd_descript(u8 command)
+{
+#ifdef CONFIG_ATA_VERBOSE_ERROR
+	static const struct
+	{
+		u8 command;
+		const char *text;
+	} cmd_descr[] = {
+		{ ATA_CMD_DEV_RESET,		"DEVICE RESET" },
+		{ ATA_CMD_CHK_POWER, 		"CHECK POWER MODE" },
+		{ ATA_CMD_STANDBY, 		"STANDBY" },
+		{ ATA_CMD_IDLE, 		"IDLE" },
+		{ ATA_CMD_EDD, 			"EXECUTE DEVICE DIAGNOSTIC" },
+		{ ATA_CMD_DOWNLOAD_MICRO,   	"DOWNLOAD MICROCODE" },
+		{ ATA_CMD_NOP,			"NOP" },
+		{ ATA_CMD_FLUSH, 		"FLUSH CACHE" },
+		{ ATA_CMD_FLUSH_EXT, 		"FLUSH CACHE EXT" },
+		{ ATA_CMD_ID_ATA,  		"IDENTIFY DEVICE" },
+		{ ATA_CMD_ID_ATAPI, 		"IDENTIFY PACKET DEVICE" },
+		{ ATA_CMD_SERVICE, 		"SERVICE" },
+		{ ATA_CMD_READ, 		"READ DMA" },
+		{ ATA_CMD_READ_EXT, 		"READ DMA EXT" },
+		{ ATA_CMD_READ_QUEUED, 		"READ DMA QUEUED" },
+		{ ATA_CMD_READ_STREAM_EXT, 	"READ STREAM EXT" },
+		{ ATA_CMD_READ_STREAM_DMA_EXT,  "READ STREAM DMA EXT" },
+		{ ATA_CMD_WRITE, 		"WRITE DMA" },
+		{ ATA_CMD_WRITE_EXT, 		"WRITE DMA EXT" },
+		{ ATA_CMD_WRITE_QUEUED, 	"WRITE DMA QUEUED EXT" },
+		{ ATA_CMD_WRITE_STREAM_EXT, 	"WRITE STREAM EXT" },
+		{ ATA_CMD_WRITE_STREAM_DMA_EXT, "WRITE STREAM DMA EXT" },
+		{ ATA_CMD_WRITE_FUA_EXT,	"WRITE DMA FUA EXT" },
+		{ ATA_CMD_WRITE_QUEUED_FUA_EXT, "WRITE DMA QUEUED FUA EXT" },
+		{ ATA_CMD_FPDMA_READ,		"READ FPDMA QUEUED" },
+		{ ATA_CMD_FPDMA_WRITE,		"WRITE FPDMA QUEUED" },
+		{ ATA_CMD_PIO_READ,		"READ SECTOR(S)" },
+		{ ATA_CMD_PIO_READ_EXT,		"READ SECTOR(S) EXT" },
+		{ ATA_CMD_PIO_WRITE,		"WRITE SECTOR(S)" },
+		{ ATA_CMD_PIO_WRITE_EXT,	"WRITE SECTOR(S) EXT" },
+		{ ATA_CMD_READ_MULTI,		"READ MULTIPLE" },
+		{ ATA_CMD_READ_MULTI_EXT,	"READ MULTIPLE EXT" },
+		{ ATA_CMD_WRITE_MULTI,		"WRITE MULTIPLE" },
+		{ ATA_CMD_WRITE_MULTI_EXT,	"WRITE MULTIPLE EXT" },
+		{ ATA_CMD_WRITE_MULTI_FUA_EXT, 	"WRITE MULTIPLE FUA EXT" },
+		{ ATA_CMD_SET_FEATURES,		"SET FEATURES" },
+		{ ATA_CMD_SET_MULTI,		"SET MULTIPLE MODE" },
+		{ ATA_CMD_VERIFY,		"READ VERIFY SECTOR(S)" },
+		{ ATA_CMD_VERIFY_EXT,		"READ VERIFY SECTOR(S) EXT" },
+		{ ATA_CMD_WRITE_UNCORR_EXT,	"WRITE UNCORRECTABLE EXT" },
+		{ ATA_CMD_STANDBYNOW1,		"STANDBY IMMEDIATE" },
+		{ ATA_CMD_IDLEIMMEDIATE,	"IDLE IMMEDIATE" },
+		{ ATA_CMD_SLEEP,		"SLEEP" },
+		{ ATA_CMD_INIT_DEV_PARAMS,	"INITIALIZE DEVICE PARAMETERS" },
+		{ ATA_CMD_READ_NATIVE_MAX,	"READ NATIVE MAX ADDRESS" },
+		{ ATA_CMD_READ_NATIVE_MAX_EXT,	"READ NATIVE MAX ADDRESS EXT" },
+		{ ATA_CMD_SET_MAX,		"SET MAX ADDRESS" },
+		{ ATA_CMD_SET_MAX_EXT,		"SET MAX ADDRESS EXT" },
+		{ ATA_CMD_READ_LOG_EXT,		"READ LOG EXT" },
+		{ ATA_CMD_WRITE_LOG_EXT,	"WRITE LOG EXT" },
+		{ ATA_CMD_READ_LOG_DMA_EXT,	"READ LOG DMA EXT" },
+		{ ATA_CMD_WRITE_LOG_DMA_EXT, 	"WRITE LOG DMA EXT" },
+		{ ATA_CMD_TRUSTED_RCV,		"TRUSTED RECEIVE" },
+		{ ATA_CMD_TRUSTED_RCV_DMA, 	"TRUSTED RECEIVE DMA" },
+		{ ATA_CMD_TRUSTED_SND,		"TRUSTED SEND" },
+		{ ATA_CMD_TRUSTED_SND_DMA, 	"TRUSTED SEND DMA" },
+		{ ATA_CMD_PMP_READ,		"READ BUFFER" },
+		{ ATA_CMD_PMP_WRITE,		"WRITE BUFFER" },
+		{ ATA_CMD_CONF_OVERLAY,		"DEVICE CONFIGURATION OVERLAY" },
+		{ ATA_CMD_SEC_SET_PASS,		"SECURITY SET PASSWORD" },
+		{ ATA_CMD_SEC_UNLOCK,		"SECURITY UNLOCK" },
+		{ ATA_CMD_SEC_ERASE_PREP,	"SECURITY ERASE PREPARE" },
+		{ ATA_CMD_SEC_ERASE_UNIT,	"SECURITY ERASE UNIT" },
+		{ ATA_CMD_SEC_FREEZE_LOCK,	"SECURITY FREEZE LOCK" },
+		{ ATA_CMD_SEC_DISABLE_PASS,	"SECURITY DISABLE PASSWORD" },
+		{ ATA_CMD_CONFIG_STREAM,	"CONFIGURE STREAM" },
+		{ ATA_CMD_SMART,		"SMART" },
+		{ ATA_CMD_MEDIA_LOCK,		"DOOR LOCK" },
+		{ ATA_CMD_MEDIA_UNLOCK,		"DOOR UNLOCK" },
+		{ ATA_CMD_CHK_MED_CRD_TYP, 	"CHECK MEDIA CARD TYPE" },
+		{ ATA_CMD_CFA_REQ_EXT_ERR, 	"CFA REQUEST EXTENDED ERROR" },
+		{ ATA_CMD_CFA_WRITE_NE,		"CFA WRITE SECTORS WITHOUT ERASE" },
+		{ ATA_CMD_CFA_TRANS_SECT,	"CFA TRANSLATE SECTOR" },
+		{ ATA_CMD_CFA_ERASE,		"CFA ERASE SECTORS" },
+		{ ATA_CMD_CFA_WRITE_MULT_NE, 	"CFA WRITE MULTIPLE WITHOUT ERASE" },
+		{ ATA_CMD_READ_LONG,		"READ LONG (with retries)" },
+		{ ATA_CMD_READ_LONG_ONCE,	"READ LONG (without retries)" },
+		{ ATA_CMD_WRITE_LONG,		"WRITE LONG (with retries)" },
+		{ ATA_CMD_WRITE_LONG_ONCE,	"WRITE LONG (without retries)" },
+		{ ATA_CMD_RESTORE,		"RECALIBRATE" },
+		{ 0,				NULL } /* terminate list */
+	};
+
+	unsigned int i;
+	for (i = 0; cmd_descr[i].text; i++)
+		if (cmd_descr[i].command == command)
+			return cmd_descr[i].text;
+#endif
+
+	return NULL;
+}
+
+/**
  *	ata_eh_link_report - report error handling to user
  *	@link: ATA link EH is going on
  *
@@ -2177,6 +2288,7 @@ static void ata_eh_link_report(struct ata_link *link)
 			ata_link_printk(link, KERN_ERR, "%s\n", desc);
 	}
 
+#ifdef CONFIG_ATA_VERBOSE_ERROR
 	if (ehc->i.serror)
 		ata_link_printk(link, KERN_ERR,
 		  "SError: { %s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s}\n",
@@ -2197,6 +2309,7 @@ static void ata_eh_link_report(struct ata_link *link)
 		  ehc->i.serror & SERR_TRANS_ST_ERROR ? "TrStaTrns " : "",
 		  ehc->i.serror & SERR_UNRECOG_FIS ? "UnrecFIS " : "",
 		  ehc->i.serror & SERR_DEV_XCHG ? "DevExch " : "");
+#endif
 
 	for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
 		struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag);
@@ -2228,14 +2341,23 @@ static void ata_eh_link_report(struct ata_link *link)
 				 dma_str[qc->dma_dir]);
 		}
 
-		if (ata_is_atapi(qc->tf.protocol))
-			snprintf(cdb_buf, sizeof(cdb_buf),
+		if (ata_is_atapi(qc->tf.protocol)) {
+			if (qc->scsicmd)
+				scsi_print_command(qc->scsicmd);
+			else
+				snprintf(cdb_buf, sizeof(cdb_buf),
 				 "cdb %02x %02x %02x %02x %02x %02x %02x %02x  "
 				 "%02x %02x %02x %02x %02x %02x %02x %02x\n         ",
 				 cdb[0], cdb[1], cdb[2], cdb[3],
 				 cdb[4], cdb[5], cdb[6], cdb[7],
 				 cdb[8], cdb[9], cdb[10], cdb[11],
 				 cdb[12], cdb[13], cdb[14], cdb[15]);
+		} else {
+			const char *descr = ata_get_cmd_descript(cmd->command);
+			if (descr)
+				ata_dev_printk(qc->dev, KERN_ERR,
+					"failed command: %s\n", descr);
+		}
 
 		ata_dev_printk(qc->dev, KERN_ERR,
 			"cmd %02x/%02x:%02x:%02x:%02x:%02x/%02x:%02x:%02x:%02x:%02x/%02x "
@@ -2254,6 +2376,7 @@ static void ata_eh_link_report(struct ata_link *link)
 			res->device, qc->err_mask, ata_err_string(qc->err_mask),
 			qc->err_mask & AC_ERR_NCQ ? " <F>" : "");
 
+#ifdef CONFIG_ATA_VERBOSE_ERROR
 		if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ |
 				    ATA_ERR)) {
 			if (res->command & ATA_BUSY)
@@ -2277,6 +2400,7 @@ static void ata_eh_link_report(struct ata_link *link)
 			  res->feature & ATA_UNC ? "UNC " : "",
 			  res->feature & ATA_IDNF ? "IDNF " : "",
 			  res->feature & ATA_ABORTED ? "ABRT " : "");
+#endif
 	}
 }
 
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 89a1e0018e71..be8e2628f82c 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -164,6 +164,7 @@ extern void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev,
 extern void ata_eh_done(struct ata_link *link, struct ata_device *dev,
 			unsigned int action);
 extern void ata_eh_autopsy(struct ata_port *ap);
+const char *ata_get_cmd_descript(u8 command);
 extern void ata_eh_report(struct ata_port *ap);
 extern int ata_eh_reset(struct ata_link *link, int classify,
 			ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
diff --git a/include/linux/ata.h b/include/linux/ata.h
index f5494050df83..6299a259ed19 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -210,15 +210,25 @@ enum {
 	ATA_CMD_STANDBY		= 0xE2, /* place in standby power mode */
 	ATA_CMD_IDLE		= 0xE3, /* place in idle power mode */
 	ATA_CMD_EDD		= 0x90,	/* execute device diagnostic */
+	ATA_CMD_DOWNLOAD_MICRO  = 0x92,
+	ATA_CMD_NOP		= 0x00,
 	ATA_CMD_FLUSH		= 0xE7,
 	ATA_CMD_FLUSH_EXT	= 0xEA,
 	ATA_CMD_ID_ATA		= 0xEC,
 	ATA_CMD_ID_ATAPI	= 0xA1,
+	ATA_CMD_SERVICE		= 0xA2,
 	ATA_CMD_READ		= 0xC8,
 	ATA_CMD_READ_EXT	= 0x25,
+	ATA_CMD_READ_QUEUED	= 0x26,
+	ATA_CMD_READ_STREAM_EXT	= 0x2B,
+	ATA_CMD_READ_STREAM_DMA_EXT = 0x2A,
 	ATA_CMD_WRITE		= 0xCA,
 	ATA_CMD_WRITE_EXT	= 0x35,
+	ATA_CMD_WRITE_QUEUED	= 0x36,
+	ATA_CMD_WRITE_STREAM_EXT = 0x3B,
+	ATA_CMD_WRITE_STREAM_DMA_EXT = 0x3A,
 	ATA_CMD_WRITE_FUA_EXT	= 0x3D,
+	ATA_CMD_WRITE_QUEUED_FUA_EXT = 0x3E,
 	ATA_CMD_FPDMA_READ	= 0x60,
 	ATA_CMD_FPDMA_WRITE	= 0x61,
 	ATA_CMD_PIO_READ	= 0x20,
@@ -235,6 +245,7 @@ enum {
 	ATA_CMD_PACKET		= 0xA0,
 	ATA_CMD_VERIFY		= 0x40,
 	ATA_CMD_VERIFY_EXT	= 0x42,
+	ATA_CMD_WRITE_UNCORR_EXT = 0x45,
 	ATA_CMD_STANDBYNOW1	= 0xE0,
 	ATA_CMD_IDLEIMMEDIATE	= 0xE1,
 	ATA_CMD_SLEEP		= 0xE6,
@@ -243,15 +254,34 @@ enum {
 	ATA_CMD_READ_NATIVE_MAX_EXT = 0x27,
 	ATA_CMD_SET_MAX		= 0xF9,
 	ATA_CMD_SET_MAX_EXT	= 0x37,
-	ATA_CMD_READ_LOG_EXT	= 0x2f,
+	ATA_CMD_READ_LOG_EXT	= 0x2F,
+	ATA_CMD_WRITE_LOG_EXT	= 0x3F,
+	ATA_CMD_READ_LOG_DMA_EXT = 0x47,
+	ATA_CMD_WRITE_LOG_DMA_EXT = 0x57,
+	ATA_CMD_TRUSTED_RCV	= 0x5C,
+	ATA_CMD_TRUSTED_RCV_DMA = 0x5D,
+	ATA_CMD_TRUSTED_SND	= 0x5E,
+	ATA_CMD_TRUSTED_SND_DMA = 0x5F,
 	ATA_CMD_PMP_READ	= 0xE4,
 	ATA_CMD_PMP_WRITE	= 0xE8,
 	ATA_CMD_CONF_OVERLAY	= 0xB1,
+	ATA_CMD_SEC_SET_PASS	= 0xF1,
+	ATA_CMD_SEC_UNLOCK	= 0xF2,
+	ATA_CMD_SEC_ERASE_PREP	= 0xF3,
+	ATA_CMD_SEC_ERASE_UNIT	= 0xF4,
 	ATA_CMD_SEC_FREEZE_LOCK	= 0xF5,
+	ATA_CMD_SEC_DISABLE_PASS = 0xF6,
+	ATA_CMD_CONFIG_STREAM	= 0x51,
 	ATA_CMD_SMART		= 0xB0,
 	ATA_CMD_MEDIA_LOCK	= 0xDE,
 	ATA_CMD_MEDIA_UNLOCK	= 0xDF,
 	ATA_CMD_DSM		= 0x06,
+	ATA_CMD_CHK_MED_CRD_TYP = 0xD1,
+	ATA_CMD_CFA_REQ_EXT_ERR = 0x03,
+	ATA_CMD_CFA_WRITE_NE	= 0x38,
+	ATA_CMD_CFA_TRANS_SECT	= 0x87,
+	ATA_CMD_CFA_ERASE	= 0xC0,
+	ATA_CMD_CFA_WRITE_MULT_NE = 0xCD,
 	/* marked obsolete in the ATA/ATAPI-7 spec */
 	ATA_CMD_RESTORE		= 0x10,