Automatic merge of /spare/repo/netdev-2.6 branch dm9000

5 files changed, 1403 insertions, 0 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f08e01b2fd19..cebee528f3c7 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -824,6 +824,18 @@ config SMC9194
 	  <file:Documentation/networking/net-modules.txt>. The module
 	  will be called smc9194.
 
+config DM9000
+	tristate "DM9000 support"
+	depends on ARM && NET_ETHERNET
+	select CRC32
+	select MII
+	---help---
+	  Support for DM9000 chipset.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module will be
+	  called dm9000.
+
 config NET_VENDOR_RACAL
 	bool "Racal-Interlan (Micom) NI cards"
 	depends on NET_ETHERNET && ISA
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 30c7567001fe..0d97be0c77d4 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -180,6 +180,7 @@ obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
 obj-$(CONFIG_IBMVETH) += ibmveth.o
 obj-$(CONFIG_S2IO) += s2io.o
 obj-$(CONFIG_SMC91X) += smc91x.o
+obj-$(CONFIG_DM9000) += dm9000.o
 obj-$(CONFIG_FEC_8XX) += fec_8xx/
 
 obj-$(CONFIG_ARM) += arm/
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
new file mode 100644
index 000000000000..f4ba0ffb8637
--- /dev/null
+++ b/drivers/net/dm9000.c
@@ -0,0 +1,1219 @@
+/*
+ *   dm9000.c: Version 1.2 03/18/2003
+ *
+ *         A Davicom DM9000 ISA NIC fast Ethernet driver for Linux.
+ * 	Copyright (C) 1997  Sten Wang
+ *
+ * 	This program is free software; you can redistribute it and/or
+ * 	modify it under the terms of the GNU General Public License
+ * 	as published by the Free Software Foundation; either version 2
+ * 	of the License, or (at your option) any later version.
+ *
+ * 	This program is distributed in the hope that it will be useful,
+ * 	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * 	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * 	GNU General Public License for more details.
+ *
+ *   (C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved.
+ *
+ * V0.11	06/20/2001	REG_0A bit3=1, default enable BP with DA match
+ * 	06/22/2001 	Support DM9801 progrmming
+ * 	 	 	E3: R25 = ((R24 + NF) & 0x00ff) | 0xf000
+ * 		 	E4: R25 = ((R24 + NF) & 0x00ff) | 0xc200
+ * 		     		R17 = (R17 & 0xfff0) | NF + 3
+ * 		 	E5: R25 = ((R24 + NF - 3) & 0x00ff) | 0xc200
+ * 		     		R17 = (R17 & 0xfff0) | NF
+ *
+ * v1.00               	modify by simon 2001.9.5
+ *                         change for kernel 2.4.x
+ *
+ * v1.1   11/09/2001      	fix force mode bug
+ *
+ * v1.2   03/18/2003       Weilun Huang <weilun_huang@davicom.com.tw>:
+ * 			Fixed phy reset.
+ * 			Added tx/rx 32 bit mode.
+ * 			Cleaned up for kernel merge.
+ *
+ *        03/03/2004    Sascha Hauer <s.hauer@pengutronix.de>
+ *                      Port to 2.6 kernel
+ *
+ *	  24-Sep-2004   Ben Dooks <ben@simtec.co.uk>
+ *			Cleanup of code to remove ifdefs
+ *			Allowed platform device data to influence access width
+ *			Reformatting areas of code
+ *
+ *        17-Mar-2005   Sascha Hauer <s.hauer@pengutronix.de>
+ *                      * removed 2.4 style module parameters
+ *                      * removed removed unused stat counter and fixed
+ *                        net_device_stats
+ *                      * introduced tx_timeout function
+ *                      * reworked locking
+ */
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/skbuff.h>
+#include <linux/version.h>
+#include <linux/spinlock.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/dm9000.h>
+#include <linux/delay.h>
+
+#include <asm/delay.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include "dm9000.h"
+
+/* Board/System/Debug information/definition ---------------- */
+
+#define DM9000_PHY		0x40	/* PHY address 0x01 */
+
+#define TRUE			1
+#define FALSE			0
+
+#define CARDNAME "dm9000"
+#define PFX CARDNAME ": "
+
+#define DM9000_TIMER_WUT  jiffies+(HZ*2)	/* timer wakeup time : 2 second */
+
+#define DM9000_DEBUG 0
+
+#if DM9000_DEBUG > 2
+#define PRINTK3(args...)  printk(CARDNAME ": " args)
+#else
+#define PRINTK3(args...)  do { } while(0)
+#endif
+
+#if DM9000_DEBUG > 1
+#define PRINTK2(args...)  printk(CARDNAME ": " args)
+#else
+#define PRINTK2(args...)  do { } while(0)
+#endif
+
+#if DM9000_DEBUG > 0
+#define PRINTK1(args...)  printk(CARDNAME ": " args)
+#define PRINTK(args...)   printk(CARDNAME ": " args)
+#else
+#define PRINTK1(args...)  do { } while(0)
+#define PRINTK(args...)   printk(KERN_DEBUG args)
+#endif
+
+/*
+ * Transmit timeout, default 5 seconds.
+ */
+static int watchdog = 5000;
+module_param(watchdog, int, 0400);
+MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds");
+
+/* Structure/enum declaration ------------------------------- */
+typedef struct board_info {
+
+	void __iomem *io_addr;	/* Register I/O base address */
+	void __iomem *io_data;	/* Data I/O address */
+	u16 irq;		/* IRQ */
+
+	u16 tx_pkt_cnt;
+	u16 queue_pkt_len;
+	u16 queue_start_addr;
+	u16 dbug_cnt;
+	u8 io_mode;		/* 0:word, 2:byte */
+	u8 phy_addr;
+
+	void (*inblk)(void __iomem *port, void *data, int length);
+	void (*outblk)(void __iomem *port, void *data, int length);
+	void (*dumpblk)(void __iomem *port, int length);
+
+	struct resource	*addr_res;   /* resources found */
+	struct resource *data_res;
+	struct resource	*addr_req;   /* resources requested */
+	struct resource *data_req;
+	struct resource *irq_res;
+
+	struct timer_list timer;
+	struct net_device_stats stats;
+	unsigned char srom[128];
+	spinlock_t lock;
+
+	struct mii_if_info mii;
+	u32 msg_enable;
+} board_info_t;
+
+/* function declaration ------------------------------------- */
+static int dm9000_probe(struct device *);
+static int dm9000_open(struct net_device *);
+static int dm9000_start_xmit(struct sk_buff *, struct net_device *);
+static int dm9000_stop(struct net_device *);
+static int dm9000_do_ioctl(struct net_device *, struct ifreq *, int);
+
+
+static void dm9000_timer(unsigned long);
+static void dm9000_init_dm9000(struct net_device *);
+
+static struct net_device_stats *dm9000_get_stats(struct net_device *);
+
+static irqreturn_t dm9000_interrupt(int, void *, struct pt_regs *);
+
+static int dm9000_phy_read(struct net_device *dev, int phyaddr_unsused, int reg);
+static void dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg,
+			   int value);
+static u16 read_srom_word(board_info_t *, int);
+static void dm9000_rx(struct net_device *);
+static void dm9000_hash_table(struct net_device *);
+
+//#define DM9000_PROGRAM_EEPROM
+#ifdef DM9000_PROGRAM_EEPROM
+static void program_eeprom(board_info_t * db);
+#endif
+/* DM9000 network board routine ---------------------------- */
+
+static void
+dm9000_reset(board_info_t * db)
+{
+	PRINTK1("dm9000x: resetting\n");
+	/* RESET device */
+	writeb(DM9000_NCR, db->io_addr);
+	udelay(200);
+	writeb(NCR_RST, db->io_data);
+	udelay(200);
+}
+
+/*
+ *   Read a byte from I/O port
+ */
+static u8
+ior(board_info_t * db, int reg)
+{
+	writeb(reg, db->io_addr);
+	return readb(db->io_data);
+}
+
+/*
+ *   Write a byte to I/O port
+ */
+
+static void
+iow(board_info_t * db, int reg, int value)
+{
+	writeb(reg, db->io_addr);
+	writeb(value, db->io_data);
+}
+
+/* routines for sending block to chip */
+
+static void dm9000_outblk_8bit(void __iomem *reg, void *data, int count)
+{
+	writesb(reg, data, count);
+}
+
+static void dm9000_outblk_16bit(void __iomem *reg, void *data, int count)
+{
+	writesw(reg, data, (count+1) >> 1);
+}
+
+static void dm9000_outblk_32bit(void __iomem *reg, void *data, int count)
+{
+	writesl(reg, data, (count+3) >> 2);
+}
+
+/* input block from chip to memory */
+
+static void dm9000_inblk_8bit(void __iomem *reg, void *data, int count)
+{
+	readsb(reg, data, count+1);
+}
+
+
+static void dm9000_inblk_16bit(void __iomem *reg, void *data, int count)
+{
+	readsw(reg, data, (count+1) >> 1);
+}
+
+static void dm9000_inblk_32bit(void __iomem *reg, void *data, int count)
+{
+	readsl(reg, data, (count+3) >> 2);
+}
+
+/* dump block from chip to null */
+
+static void dm9000_dumpblk_8bit(void __iomem *reg, int count)
+{
+	int i;
+	int tmp;
+
+	for (i = 0; i < count; i++)
+		tmp = readb(reg);
+}
+
+static void dm9000_dumpblk_16bit(void __iomem *reg, int count)
+{
+	int i;
+	int tmp;
+
+	count = (count + 1) >> 1;
+
+	for (i = 0; i < count; i++)
+		tmp = readw(reg);
+}
+
+static void dm9000_dumpblk_32bit(void __iomem *reg, int count)
+{
+	int i;
+	int tmp;
+
+	count = (count + 3) >> 2;
+
+	for (i = 0; i < count; i++)
+		tmp = readl(reg);
+}
+
+/* dm9000_set_io
+ *
+ * select the specified set of io routines to use with the
+ * device
+ */
+
+static void dm9000_set_io(struct board_info *db, int byte_width)
+{
+	/* use the size of the data resource to work out what IO
+	 * routines we want to use
+	 */
+
+	switch (byte_width) {
+	case 1:
+		db->dumpblk = dm9000_dumpblk_8bit;
+		db->outblk  = dm9000_outblk_8bit;
+		db->inblk   = dm9000_inblk_8bit;
+		break;
+
+	case 2:
+		db->dumpblk = dm9000_dumpblk_16bit;
+		db->outblk  = dm9000_outblk_16bit;
+		db->inblk   = dm9000_inblk_16bit;
+		break;
+
+	case 3:
+		printk(KERN_ERR PFX ": 3 byte IO, falling back to 16bit\n");
+		db->dumpblk = dm9000_dumpblk_16bit;
+		db->outblk  = dm9000_outblk_16bit;
+		db->inblk   = dm9000_inblk_16bit;
+		break;
+
+	case 4:
+	default:
+		db->dumpblk = dm9000_dumpblk_32bit;
+		db->outblk  = dm9000_outblk_32bit;
+		db->inblk   = dm9000_inblk_32bit;
+		break;
+	}
+}
+
+
+/* Our watchdog timed out. Called by the networking layer */
+static void dm9000_timeout(struct net_device *dev)
+{
+	board_info_t *db = (board_info_t *) dev->priv;
+	u8 reg_save;
+	unsigned long flags;
+
+	/* Save previous register address */
+	reg_save = readb(db->io_addr);
+	spin_lock_irqsave(db->lock,flags);
+
+	netif_stop_queue(dev);
+	dm9000_reset(db);
+	dm9000_init_dm9000(dev);
+	/* We can accept TX packets again */
+	dev->trans_start = jiffies;
+	netif_wake_queue(dev);
+
+	/* Restore previous register address */
+	writeb(reg_save, db->io_addr);
+	spin_unlock_irqrestore(db->lock,flags);
+}
+
+
+/* dm9000_release_board
+ *
+ * release a board, and any mapped resources
+ */
+
+static void
+dm9000_release_board(struct platform_device *pdev, struct board_info *db)
+{
+	if (db->data_res == NULL) {
+		if (db->addr_res != NULL)
+			release_mem_region((unsigned long)db->io_addr, 4);
+		return;
+	}
+
+	/* unmap our resources */
+
+	iounmap(db->io_addr);
+	iounmap(db->io_data);
+
+	/* release the resources */
+
+	if (db->data_req != NULL) {
+		release_resource(db->data_req);
+		kfree(db->data_req);
+	}
+
+	if (db->addr_res != NULL) {
+		release_resource(db->data_req);
+		kfree(db->addr_req);
+	}
+}
+
+#define res_size(_r) (((_r)->end - (_r)->start) + 1)
+
+/*
+ * Search DM9000 board, allocate space and register it
+ */
+static int
+dm9000_probe(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct dm9000_plat_data *pdata = pdev->dev.platform_data;
+	struct board_info *db;	/* Point a board information structure */
+	struct net_device *ndev;
+	unsigned long base;
+	int ret = 0;
+	int iosize;
+	int i;
+	u32 id_val;
+
+	printk(KERN_INFO "%s Ethernet Driver\n", CARDNAME);
+
+	/* Init network device */
+	ndev = alloc_etherdev(sizeof (struct board_info));
+	if (!ndev) {
+		printk("%s: could not allocate device.\n", CARDNAME);
+		return -ENOMEM;
+	}
+
+	SET_MODULE_OWNER(ndev);
+	SET_NETDEV_DEV(ndev, dev);
+
+	PRINTK2("dm9000_probe()");
+
+	/* setup board info structure */
+	db = (struct board_info *) ndev->priv;
+	memset(db, 0, sizeof (*db));
+
+	if (pdev->num_resources < 2) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	switch (pdev->num_resources) {
+	case 2:
+		base = pdev->resource[0].start;
+
+		if (!request_mem_region(base, 4, ndev->name)) {
+			ret = -EBUSY;
+			goto out;
+		}
+
+		ndev->base_addr = base;
+		ndev->irq = pdev->resource[1].start;
+		db->io_addr = (void *)base;
+		db->io_data = (void *)(base + 4);
+
+		break;
+
+	case 3:
+		db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		db->data_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+		db->irq_res  = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+		if (db->addr_res == NULL || db->data_res == NULL) {
+			printk(KERN_ERR PFX "insufficient resources\n");
+			ret = -ENOENT;
+			goto out;
+		}
+
+		i = res_size(db->addr_res);
+		db->addr_req = request_mem_region(db->addr_res->start, i,
+						  pdev->name);
+
+		if (db->addr_req == NULL) {
+			printk(KERN_ERR PFX "cannot claim address reg area\n");
+			ret = -EIO;
+			goto out;
+		}
+
+		db->io_addr = ioremap(db->addr_res->start, i);
+
+		if (db->io_addr == NULL) {
+			printk(KERN_ERR "failed to ioremap address reg\n");
+			ret = -EINVAL;
+			goto out;
+		}
+
+		iosize = res_size(db->data_res);
+		db->data_req = request_mem_region(db->data_res->start, iosize,
+						  pdev->name);
+
+		if (db->data_req == NULL) {
+			printk(KERN_ERR PFX "cannot claim data reg area\n");
+			ret = -EIO;
+			goto out;
+		}
+
+		db->io_data = ioremap(db->data_res->start, iosize);
+
+		if (db->io_data == NULL) {
+			printk(KERN_ERR "failed to ioremap data reg\n");
+			ret = -EINVAL;
+			goto out;
+		}
+
+		/* fill in parameters for net-dev structure */
+
+		ndev->base_addr = (unsigned long)db->io_addr;
+		ndev->irq	= db->irq_res->start;
+
+		/* ensure at least we have a default set of IO routines */
+		dm9000_set_io(db, iosize);
+
+	}
+
+	/* check to see if anything is being over-ridden */
+	if (pdata != NULL) {
+		/* check to see if the driver wants to over-ride the
+		 * default IO width */
+
+		if (pdata->flags & DM9000_PLATF_8BITONLY)
+			dm9000_set_io(db, 1);
+
+		if (pdata->flags & DM9000_PLATF_16BITONLY)
+			dm9000_set_io(db, 2);
+
+		if (pdata->flags & DM9000_PLATF_32BITONLY)
+			dm9000_set_io(db, 4);
+
+		/* check to see if there are any IO routine
+		 * over-rides */
+
+		if (pdata->inblk != NULL)
+			db->inblk = pdata->inblk;
+
+		if (pdata->outblk != NULL)
+			db->outblk = pdata->outblk;
+
+		if (pdata->dumpblk != NULL)
+			db->dumpblk = pdata->dumpblk;
+	}
+
+	dm9000_reset(db);
+
+	/* try two times, DM9000 sometimes gets the first read wrong */
+	for (i = 0; i < 2; i++) {
+		id_val  = ior(db, DM9000_VIDL);
+		id_val |= (u32)ior(db, DM9000_VIDH) << 8;
+		id_val |= (u32)ior(db, DM9000_PIDL) << 16;
+		id_val |= (u32)ior(db, DM9000_PIDH) << 24;
+
+		if (id_val == DM9000_ID)
+			break;
+		printk("%s: read wrong id 0x%08x\n", CARDNAME, id_val);
+	}
+
+	if (id_val != DM9000_ID) {
+		printk("%s: wrong id: 0x%08x\n", CARDNAME, id_val);
+		goto release;
+	}
+
+	/* from this point we assume that we have found a DM9000 */
+
+	/* driver system function */
+	ether_setup(ndev);
+
+	ndev->open		 = &dm9000_open;
+	ndev->hard_start_xmit    = &dm9000_start_xmit;
+	ndev->tx_timeout         = &dm9000_timeout;
+	ndev->watchdog_timeo = msecs_to_jiffies(watchdog);
+	ndev->stop		 = &dm9000_stop;
+	ndev->get_stats		 = &dm9000_get_stats;
+	ndev->set_multicast_list = &dm9000_hash_table;
+	ndev->do_ioctl		 = &dm9000_do_ioctl;
+
+#ifdef DM9000_PROGRAM_EEPROM
+	program_eeprom(db);
+#endif
+	db->msg_enable       = NETIF_MSG_LINK;
+	db->mii.phy_id_mask  = 0x1f;
+	db->mii.reg_num_mask = 0x1f;
+	db->mii.force_media  = 0;
+	db->mii.full_duplex  = 0;
+	db->mii.dev	     = ndev;
+	db->mii.mdio_read    = dm9000_phy_read;
+	db->mii.mdio_write   = dm9000_phy_write;
+
+	/* Read SROM content */
+	for (i = 0; i < 64; i++)
+		((u16 *) db->srom)[i] = read_srom_word(db, i);
+
+	/* Set Node Address */
+	for (i = 0; i < 6; i++)
+		ndev->dev_addr[i] = db->srom[i];
+
+	if (!is_valid_ether_addr(ndev->dev_addr))
+		printk("%s: Invalid ethernet MAC address.  Please "
+		       "set using ifconfig\n", ndev->name);
+
+	dev_set_drvdata(dev, ndev);
+	ret = register_netdev(ndev);
+
+	if (ret == 0) {
+		printk("%s: dm9000 at %p,%p IRQ %d MAC: ",
+		       ndev->name,  db->io_addr, db->io_data, ndev->irq);
+		for (i = 0; i < 5; i++)
+			printk("%02x:", ndev->dev_addr[i]);
+		printk("%02x\n", ndev->dev_addr[5]);
+	}
+	return 0;
+
+ release:
+ out:
+	printk("%s: not found (%d).\n", CARDNAME, ret);
+
+	dm9000_release_board(pdev, db);
+	kfree(ndev);
+
+	return ret;
+}
+
+/*
+ *  Open the interface.
+ *  The interface is opened whenever "ifconfig" actives it.
+ */
+static int
+dm9000_open(struct net_device *dev)
+{
+	board_info_t *db = (board_info_t *) dev->priv;
+
+	PRINTK2("entering dm9000_open\n");
+
+	if (request_irq(dev->irq, &dm9000_interrupt, SA_SHIRQ, dev->name, dev))
+		return -EAGAIN;
+
+	/* Initialize DM9000 board */
+	dm9000_reset(db);
+	dm9000_init_dm9000(dev);
+
+	/* Init driver variable */
+	db->dbug_cnt = 0;
+
+	/* set and active a timer process */
+	init_timer(&db->timer);
+	db->timer.expires  = DM9000_TIMER_WUT * 2;
+	db->timer.data     = (unsigned long) dev;
+	db->timer.function = &dm9000_timer;
+	add_timer(&db->timer);
+
+	mii_check_media(&db->mii, netif_msg_link(db), 1);
+	netif_start_queue(dev);
+
+	return 0;
+}
+
+/*
+ * Initilize dm9000 board
+ */
+static void
+dm9000_init_dm9000(struct net_device *dev)
+{
+	board_info_t *db = (board_info_t *) dev->priv;
+
+	PRINTK1("entering %s\n",__FUNCTION__);
+
+	/* I/O mode */
+	db->io_mode = ior(db, DM9000_ISR) >> 6;	/* ISR bit7:6 keeps I/O mode */
+
+	/* GPIO0 on pre-activate PHY */
+	iow(db, DM9000_GPR, 0);	/* REG_1F bit0 activate phyxcer */
+	iow(db, DM9000_GPCR, GPCR_GEP_CNTL);	/* Let GPIO0 output */
+	iow(db, DM9000_GPR, 0);	/* Enable PHY */
+
+	/* Program operating register */
+	iow(db, DM9000_TCR, 0);	        /* TX Polling clear */
+	iow(db, DM9000_BPTR, 0x3f);	/* Less 3Kb, 200us */
+	iow(db, DM9000_FCR, 0xff);	/* Flow Control */
+	iow(db, DM9000_SMCR, 0);        /* Special Mode */
+	/* clear TX status */
+	iow(db, DM9000_NSR, NSR_WAKEST | NSR_TX2END | NSR_TX1END);
+	iow(db, DM9000_ISR, ISR_CLR_STATUS); /* Clear interrupt status */
+
+	/* Set address filter table */
+	dm9000_hash_table(dev);
+
+	/* Activate DM9000 */
+	iow(db, DM9000_RCR, RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN);
+	/* Enable TX/RX interrupt mask */
+	iow(db, DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM);
+
+	/* Init Driver variable */
+	db->tx_pkt_cnt = 0;
+	db->queue_pkt_len = 0;
+	dev->trans_start = 0;
+	spin_lock_init(&db->lock);
+}
+
+/*
+ *  Hardware start transmission.
+ *  Send a packet to media from the upper layer.
+ */
+static int
+dm9000_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	board_info_t *db = (board_info_t *) dev->priv;
+
+	PRINTK3("dm9000_start_xmit\n");
+
+	if (db->tx_pkt_cnt > 1)
+		return 1;
+
+	netif_stop_queue(dev);
+
+	/* Disable all interrupts */
+	iow(db, DM9000_IMR, IMR_PAR);
+
+	/* Move data to DM9000 TX RAM */
+	writeb(DM9000_MWCMD, db->io_addr);
+
+	(db->outblk)(db->io_data, skb->data, skb->len);
+	db->stats.tx_bytes += skb->len;
+
+	/* TX control: First packet immediately send, second packet queue */
+	if (db->tx_pkt_cnt == 0) {
+
+		/* First Packet */
+		db->tx_pkt_cnt++;
+
+		/* Set TX length to DM9000 */
+		iow(db, DM9000_TXPLL, skb->len & 0xff);
+		iow(db, DM9000_TXPLH, (skb->len >> 8) & 0xff);
+
+		/* Issue TX polling command */
+		iow(db, DM9000_TCR, TCR_TXREQ);	/* Cleared after TX complete */
+
+		dev->trans_start = jiffies;	/* save the time stamp */
+
+	} else {
+		/* Second packet */
+		db->tx_pkt_cnt++;
+		db->queue_pkt_len = skb->len;
+	}
+
+	/* free this SKB */
+	dev_kfree_skb(skb);
+
+	/* Re-enable resource check */
+	if (db->tx_pkt_cnt == 1)
+		netif_wake_queue(dev);
+
+	/* Re-enable interrupt */
+	iow(db, DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM);
+
+	return 0;
+}
+
+static void
+dm9000_shutdown(struct net_device *dev)
+{
+	board_info_t *db = (board_info_t *) dev->priv;
+
+	/* RESET device */
+	dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET);	/* PHY RESET */
+	iow(db, DM9000_GPR, 0x01);	/* Power-Down PHY */
+	iow(db, DM9000_IMR, IMR_PAR);	/* Disable all interrupt */
+	iow(db, DM9000_RCR, 0x00);	/* Disable RX */
+}
+
+/*
+ * Stop the interface.
+ * The interface is stopped when it is brought.
+ */
+static int
+dm9000_stop(struct net_device *ndev)
+{
+	board_info_t *db = (board_info_t *) ndev->priv;
+
+	PRINTK1("entering %s\n",__FUNCTION__);
+
+	/* deleted timer */
+	del_timer(&db->timer);
+
+	netif_stop_queue(ndev);
+	netif_carrier_off(ndev);
+
+	/* free interrupt */
+	free_irq(ndev->irq, ndev);
+
+	dm9000_shutdown(ndev);
+
+	return 0;
+}
+
+/*
+ * DM9000 interrupt handler
+ * receive the packet to upper layer, free the transmitted packet
+ */
+
+void
+dm9000_tx_done(struct net_device *dev, board_info_t * db)
+{
+	int tx_status = ior(db, DM9000_NSR);	/* Got TX status */
+
+	if (tx_status & (NSR_TX2END | NSR_TX1END)) {
+		/* One packet sent complete */
+		db->tx_pkt_cnt--;
+		db->stats.tx_packets++;
+
+		/* Queue packet check & send */
+		if (db->tx_pkt_cnt > 0) {
+			iow(db, DM9000_TXPLL, db->queue_pkt_len & 0xff);
+			iow(db, DM9000_TXPLH, (db->queue_pkt_len >> 8) & 0xff);
+			iow(db, DM9000_TCR, TCR_TXREQ);
+			dev->trans_start = jiffies;
+		}
+		netif_wake_queue(dev);
+	}
+}
+
+static irqreturn_t
+dm9000_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct net_device *dev = dev_id;
+	board_info_t *db;
+	int int_status;
+	u8 reg_save;
+
+	PRINTK3("entering %s\n",__FUNCTION__);
+
+	if (!dev) {
+		PRINTK1("dm9000_interrupt() without DEVICE arg\n");
+		return IRQ_HANDLED;
+	}
+
+	/* A real interrupt coming */
+	db = (board_info_t *) dev->priv;
+	spin_lock(&db->lock);
+
+	/* Save previous register address */
+	reg_save = readb(db->io_addr);
+
+	/* Disable all interrupts */
+	iow(db, DM9000_IMR, IMR_PAR);
+
+	/* Got DM9000 interrupt status */
+	int_status = ior(db, DM9000_ISR);	/* Got ISR */
+	iow(db, DM9000_ISR, int_status);	/* Clear ISR status */
+
+	/* Received the coming packet */
+	if (int_status & ISR_PRS)
+		dm9000_rx(dev);
+
+	/* Trnasmit Interrupt check */
+	if (int_status & ISR_PTS)
+		dm9000_tx_done(dev, db);
+
+	/* Re-enable interrupt mask */
+	iow(db, DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM);
+
+	/* Restore previous register address */
+	writeb(reg_save, db->io_addr);
+
+	spin_unlock(&db->lock);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ *  Get statistics from driver.
+ */
+static struct net_device_stats *
+dm9000_get_stats(struct net_device *dev)
+{
+	board_info_t *db = (board_info_t *) dev->priv;
+	return &db->stats;
+}
+
+/*
+ *  Process the upper socket ioctl command
+ */
+static int
+dm9000_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	PRINTK1("entering %s\n",__FUNCTION__);
+	return 0;
+}
+
+/*
+ *  A periodic timer routine
+ *  Dynamic media sense, allocated Rx buffer...
+ */
+static void
+dm9000_timer(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *) data;
+	board_info_t *db = (board_info_t *) dev->priv;
+	u8 reg_save;
+	unsigned long flags;
+
+	PRINTK3("dm9000_timer()\n");
+
+	spin_lock_irqsave(db->lock,flags);
+	/* Save previous register address */
+	reg_save = readb(db->io_addr);
+
+	mii_check_media(&db->mii, netif_msg_link(db), 0);
+
+	/* Restore previous register address */
+	writeb(reg_save, db->io_addr);
+	spin_unlock_irqrestore(db->lock,flags);
+
+	/* Set timer again */
+	db->timer.expires = DM9000_TIMER_WUT;
+	add_timer(&db->timer);
+}
+
+struct dm9000_rxhdr {
+	u16	RxStatus;
+	u16	RxLen;
+} __attribute__((__packed__));
+
+/*
+ *  Received a packet and pass to upper layer
+ */
+static void
+dm9000_rx(struct net_device *dev)
+{
+	board_info_t *db = (board_info_t *) dev->priv;
+	struct dm9000_rxhdr rxhdr;
+	struct sk_buff *skb;
+	u8 rxbyte, *rdptr;
+	int GoodPacket;
+	int RxLen;
+
+	/* Check packet ready or not */
+	do {
+		ior(db, DM9000_MRCMDX);	/* Dummy read */
+
+		/* Get most updated data */
+		rxbyte = readb(db->io_data);
+
+		/* Status check: this byte must be 0 or 1 */
+		if (rxbyte > DM9000_PKT_RDY) {
+			printk("status check failed: %d\n", rxbyte);
+			iow(db, DM9000_RCR, 0x00);	/* Stop Device */
+			iow(db, DM9000_ISR, IMR_PAR);	/* Stop INT request */
+			return;
+		}
+
+		if (rxbyte != DM9000_PKT_RDY)
+			return;
+
+		/* A packet ready now  & Get status/length */
+		GoodPacket = TRUE;
+		writeb(DM9000_MRCMD, db->io_addr);
+
+		(db->inblk)(db->io_data, &rxhdr, sizeof(rxhdr));
+
+		RxLen = rxhdr.RxLen;
+
+		/* Packet Status check */
+		if (RxLen < 0x40) {
+			GoodPacket = FALSE;
+			PRINTK1("Bad Packet received (runt)\n");
+		}
+
+		if (RxLen > DM9000_PKT_MAX) {
+			PRINTK1("RST: RX Len:%x\n", RxLen);
+		}
+
+		if (rxhdr.RxStatus & 0xbf00) {
+			GoodPacket = FALSE;
+			if (rxhdr.RxStatus & 0x100) {
+				PRINTK1("fifo error\n");
+				db->stats.rx_fifo_errors++;
+			}
+			if (rxhdr.RxStatus & 0x200) {
+				PRINTK1("crc error\n");
+				db->stats.rx_crc_errors++;
+			}
+			if (rxhdr.RxStatus & 0x8000) {
+				PRINTK1("length error\n");
+				db->stats.rx_length_errors++;
+			}
+		}
+
+		/* Move data from DM9000 */
+		if (GoodPacket
+		    && ((skb = dev_alloc_skb(RxLen + 4)) != NULL)) {
+			skb->dev = dev;
+			skb_reserve(skb, 2);
+			rdptr = (u8 *) skb_put(skb, RxLen - 4);
+
+			/* Read received packet from RX SRAM */
+
+			(db->inblk)(db->io_data, rdptr, RxLen);
+			db->stats.rx_bytes += RxLen;
+
+			/* Pass to upper layer */
+			skb->protocol = eth_type_trans(skb, dev);
+			netif_rx(skb);
+			db->stats.rx_packets++;
+
+		} else {
+			/* need to dump the packet's data */
+
+			(db->dumpblk)(db->io_data, RxLen);
+		}
+	} while (rxbyte == DM9000_PKT_RDY);
+}
+
+/*
+ *  Read a word data from SROM
+ */
+static u16
+read_srom_word(board_info_t * db, int offset)
+{
+	iow(db, DM9000_EPAR, offset);
+	iow(db, DM9000_EPCR, EPCR_ERPRR);
+	mdelay(8);		/* according to the datasheet 200us should be enough,
+				   but it doesn't work */
+	iow(db, DM9000_EPCR, 0x0);
+	return (ior(db, DM9000_EPDRL) + (ior(db, DM9000_EPDRH) << 8));
+}
+
+#ifdef DM9000_PROGRAM_EEPROM
+/*
+ * Write a word data to SROM
+ */
+static void
+write_srom_word(board_info_t * db, int offset, u16 val)
+{
+	iow(db, DM9000_EPAR, offset);
+	iow(db, DM9000_EPDRH, ((val >> 8) & 0xff));
+	iow(db, DM9000_EPDRL, (val & 0xff));
+	iow(db, DM9000_EPCR, EPCR_WEP | EPCR_ERPRW);
+	mdelay(8);		/* same shit */
+	iow(db, DM9000_EPCR, 0);
+}
+
+/*
+ * Only for development:
+ * Here we write static data to the eeprom in case
+ * we don't have valid content on a new board
+ */
+static void
+program_eeprom(board_info_t * db)
+{
+	u16 eeprom[] = { 0x0c00, 0x007f, 0x1300,	/* MAC Address */
+		0x0000,		/* Autoload: accept nothing */
+		0x0a46, 0x9000,	/* Vendor / Product ID */
+		0x0000,		/* pin control */
+		0x0000,
+	};			/* Wake-up mode control */
+	int i;
+	for (i = 0; i < 8; i++)
+		write_srom_word(db, i, eeprom[i]);
+}
+#endif
+
+
+/*
+ *  Calculate the CRC valude of the Rx packet
+ *  flag = 1 : return the reverse CRC (for the received packet CRC)
+ *         0 : return the normal CRC (for Hash Table index)
+ */
+
+static unsigned long
+cal_CRC(unsigned char *Data, unsigned int Len, u8 flag)
+{
+
+       u32 crc = ether_crc_le(Len, Data);
+
+       if (flag)
+               return ~crc;
+
+       return crc;
+}
+
+/*
+ *  Set DM9000 multicast address
+ */
+static void
+dm9000_hash_table(struct net_device *dev)
+{
+	board_info_t *db = (board_info_t *) dev->priv;
+	struct dev_mc_list *mcptr = dev->mc_list;
+	int mc_cnt = dev->mc_count;
+	u32 hash_val;
+	u16 i, oft, hash_table[4];
+	unsigned long flags;
+
+	PRINTK2("dm9000_hash_table()\n");
+
+	spin_lock_irqsave(&db->lock,flags);
+
+	for (i = 0, oft = 0x10; i < 6; i++, oft++)
+		iow(db, oft, dev->dev_addr[i]);
+
+	/* Clear Hash Table */
+	for (i = 0; i < 4; i++)
+		hash_table[i] = 0x0;
+
+	/* broadcast address */
+	hash_table[3] = 0x8000;
+
+	/* the multicast address in Hash Table : 64 bits */
+	for (i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
+		hash_val = cal_CRC((char *) mcptr->dmi_addr, 6, 0) & 0x3f;
+		hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16);
+	}
+
+	/* Write the hash table to MAC MD table */
+	for (i = 0, oft = 0x16; i < 4; i++) {
+		iow(db, oft++, hash_table[i] & 0xff);
+		iow(db, oft++, (hash_table[i] >> 8) & 0xff);
+	}
+
+	spin_unlock_irqrestore(&db->lock,flags);
+}
+
+
+/*
+ *   Read a word from phyxcer
+ */
+static int
+dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
+{
+	board_info_t *db = (board_info_t *) dev->priv;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&db->lock,flags);
+	/* Fill the phyxcer register into REG_0C */
+	iow(db, DM9000_EPAR, DM9000_PHY | reg);
+
+	iow(db, DM9000_EPCR, 0xc);	/* Issue phyxcer read command */
+	udelay(100);		/* Wait read complete */
+	iow(db, DM9000_EPCR, 0x0);	/* Clear phyxcer read command */
+
+	/* The read data keeps on REG_0D & REG_0E */
+	ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL);
+
+	spin_unlock_irqrestore(&db->lock,flags);
+
+	return ret;
+}
+
+/*
+ *   Write a word to phyxcer
+ */
+static void
+dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value)
+{
+	board_info_t *db = (board_info_t *) dev->priv;
+	unsigned long flags;
+
+	spin_lock_irqsave(&db->lock,flags);
+
+	/* Fill the phyxcer register into REG_0C */
+	iow(db, DM9000_EPAR, DM9000_PHY | reg);
+
+	/* Fill the written data into REG_0D & REG_0E */
+	iow(db, DM9000_EPDRL, (value & 0xff));
+	iow(db, DM9000_EPDRH, ((value >> 8) & 0xff));
+
+	iow(db, DM9000_EPCR, 0xa);	/* Issue phyxcer write command */
+	udelay(500);		/* Wait write complete */
+	iow(db, DM9000_EPCR, 0x0);	/* Clear phyxcer write command */
+
+	spin_unlock_irqrestore(&db->lock,flags);
+}
+
+static int
+dm9000_drv_suspend(struct device *dev, u32 state, u32 level)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+
+	if (ndev && level == SUSPEND_DISABLE) {
+		if (netif_running(ndev)) {
+			netif_device_detach(ndev);
+			dm9000_shutdown(ndev);
+		}
+	}
+	return 0;
+}
+
+static int
+dm9000_drv_resume(struct device *dev, u32 level)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+	board_info_t *db = (board_info_t *) ndev->priv;
+
+	if (ndev && level == RESUME_ENABLE) {
+
+		if (netif_running(ndev)) {
+			dm9000_reset(db);
+			dm9000_init_dm9000(ndev);
+
+			netif_device_attach(ndev);
+		}
+	}
+	return 0;
+}
+
+static int
+dm9000_drv_remove(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct net_device *ndev = dev_get_drvdata(dev);
+
+	dev_set_drvdata(dev, NULL);
+
+	unregister_netdev(ndev);
+	dm9000_release_board(pdev, (board_info_t *) ndev->priv);
+	kfree(ndev);		/* free device structure */
+
+	PRINTK1("clean_module() exit\n");
+
+	return 0;
+}
+
+static struct device_driver dm9000_driver = {
+	.name    = "dm9000",
+	.bus     = &platform_bus_type,
+	.probe   = dm9000_probe,
+	.remove  = dm9000_drv_remove,
+	.suspend = dm9000_drv_suspend,
+	.resume  = dm9000_drv_resume,
+};
+
+static int __init
+dm9000_init(void)
+{
+	return driver_register(&dm9000_driver);	/* search board and register */
+}
+
+static void __exit
+dm9000_cleanup(void)
+{
+	driver_unregister(&dm9000_driver);
+}
+
+module_init(dm9000_init);
+module_exit(dm9000_cleanup);
+
+MODULE_AUTHOR("Sascha Hauer, Ben Dooks");
+MODULE_DESCRIPTION("Davicom DM9000 network driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/dm9000.h b/drivers/net/dm9000.h
new file mode 100644
index 000000000000..82cad360bafc
--- /dev/null
+++ b/drivers/net/dm9000.h
@@ -0,0 +1,135 @@
+/*
+ * dm9000 Ethernet
+ */
+
+#ifndef _DM9000X_H_
+#define _DM9000X_H_
+
+#define DM9000_ID		0x90000A46
+
+/* although the registers are 16 bit, they are 32-bit aligned.
+ */
+
+#define DM9000_NCR             0x00
+#define DM9000_NSR             0x01
+#define DM9000_TCR             0x02
+#define DM9000_TSR1            0x03
+#define DM9000_TSR2            0x04
+#define DM9000_RCR             0x05
+#define DM9000_RSR             0x06
+#define DM9000_ROCR            0x07
+#define DM9000_BPTR            0x08
+#define DM9000_FCTR            0x09
+#define DM9000_FCR             0x0A
+#define DM9000_EPCR            0x0B
+#define DM9000_EPAR            0x0C
+#define DM9000_EPDRL           0x0D
+#define DM9000_EPDRH           0x0E
+#define DM9000_WCR             0x0F
+
+#define DM9000_PAR             0x10
+#define DM9000_MAR             0x16
+
+#define DM9000_GPCR	       0x1e
+#define DM9000_GPR             0x1f
+#define DM9000_TRPAL           0x22
+#define DM9000_TRPAH           0x23
+#define DM9000_RWPAL           0x24
+#define DM9000_RWPAH           0x25
+
+#define DM9000_VIDL            0x28
+#define DM9000_VIDH            0x29
+#define DM9000_PIDL            0x2A
+#define DM9000_PIDH            0x2B
+
+#define DM9000_CHIPR           0x2C
+#define DM9000_SMCR            0x2F
+
+#define DM9000_MRCMDX          0xF0
+#define DM9000_MRCMD           0xF2
+#define DM9000_MRRL            0xF4
+#define DM9000_MRRH            0xF5
+#define DM9000_MWCMDX          0xF6
+#define DM9000_MWCMD           0xF8
+#define DM9000_MWRL            0xFA
+#define DM9000_MWRH            0xFB
+#define DM9000_TXPLL           0xFC
+#define DM9000_TXPLH           0xFD
+#define DM9000_ISR             0xFE
+#define DM9000_IMR             0xFF
+
+#define NCR_EXT_PHY         (1<<7)
+#define NCR_WAKEEN          (1<<6)
+#define NCR_FCOL            (1<<4)
+#define NCR_FDX             (1<<3)
+#define NCR_LBK             (3<<1)
+#define NCR_RST	            (1<<0)
+
+#define NSR_SPEED           (1<<7)
+#define NSR_LINKST          (1<<6)
+#define NSR_WAKEST          (1<<5)
+#define NSR_TX2END          (1<<3)
+#define NSR_TX1END          (1<<2)
+#define NSR_RXOV            (1<<1)
+
+#define TCR_TJDIS           (1<<6)
+#define TCR_EXCECM          (1<<5)
+#define TCR_PAD_DIS2        (1<<4)
+#define TCR_CRC_DIS2        (1<<3)
+#define TCR_PAD_DIS1        (1<<2)
+#define TCR_CRC_DIS1        (1<<1)
+#define TCR_TXREQ           (1<<0)
+
+#define TSR_TJTO            (1<<7)
+#define TSR_LC              (1<<6)
+#define TSR_NC              (1<<5)
+#define TSR_LCOL            (1<<4)
+#define TSR_COL             (1<<3)
+#define TSR_EC              (1<<2)
+
+#define RCR_WTDIS           (1<<6)
+#define RCR_DIS_LONG        (1<<5)
+#define RCR_DIS_CRC         (1<<4)
+#define RCR_ALL	            (1<<3)
+#define RCR_RUNT            (1<<2)
+#define RCR_PRMSC           (1<<1)
+#define RCR_RXEN            (1<<0)
+
+#define RSR_RF              (1<<7)
+#define RSR_MF              (1<<6)
+#define RSR_LCS             (1<<5)
+#define RSR_RWTO            (1<<4)
+#define RSR_PLE             (1<<3)
+#define RSR_AE              (1<<2)
+#define RSR_CE              (1<<1)
+#define RSR_FOE             (1<<0)
+
+#define FCTR_HWOT(ot)	(( ot & 0xf ) << 4 )
+#define FCTR_LWOT(ot)	( ot & 0xf )
+
+#define IMR_PAR             (1<<7)
+#define IMR_ROOM            (1<<3)
+#define IMR_ROM             (1<<2)
+#define IMR_PTM             (1<<1)
+#define IMR_PRM             (1<<0)
+
+#define ISR_ROOS            (1<<3)
+#define ISR_ROS             (1<<2)
+#define ISR_PTS             (1<<1)
+#define ISR_PRS             (1<<0)
+#define ISR_CLR_STATUS      (ISR_ROOS | ISR_ROS | ISR_PTS | ISR_PRS)
+
+#define EPCR_REEP           (1<<5)
+#define EPCR_WEP            (1<<4)
+#define EPCR_EPOS           (1<<3)
+#define EPCR_ERPRR          (1<<2)
+#define EPCR_ERPRW          (1<<1)
+#define EPCR_ERRE           (1<<0)
+
+#define GPCR_GEP_CNTL       (1<<0)
+
+#define DM9000_PKT_RDY		0x01	/* Packet ready to receive */
+#define DM9000_PKT_MAX		1536	/* Received packet max size */
+
+#endif /* _DM9000X_H_ */
+
diff --git a/include/linux/dm9000.h b/include/linux/dm9000.h
new file mode 100644
index 000000000000..0008e2ad0c9f
--- /dev/null
+++ b/include/linux/dm9000.h
@@ -0,0 +1,36 @@
+/* include/linux/dm9000.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for dm9000 platform data
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#ifndef __DM9000_PLATFORM_DATA
+#define __DM9000_PLATFORM_DATA __FILE__
+
+/* IO control flags */
+
+#define DM9000_PLATF_8BITONLY	(0x0001)
+#define DM9000_PLATF_16BITONLY	(0x0002)
+#define DM9000_PLATF_32BITONLY	(0x0004)
+
+/* platfrom data for platfrom device structure's platfrom_data field */
+
+struct dm9000_plat_data {
+	unsigned int	flags;
+
+	/* allow replacement IO routines */
+
+	void	(*inblk)(void __iomem *reg, void *data, int len);
+	void	(*outblk)(void __iomem *reg, void *data, int len);
+	void	(*dumpblk)(void __iomem *reg, int len);
+};
+
+#endif /* __DM9000_PLATFORM_DATA */
+