diff options
| author | Aleksey Gorelov <dared1st@yahoo.com> | 2008-06-19 15:22:17 -0700 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@suse.de> | 2008-07-21 15:16:37 -0700 |
| commit | 71be4f81e97fe1f42c48a6dfc411dc6d3c18687f (patch) | |
| tree | bc6d75dd6375644b3aeacf0a94fc88f009a72539 | |
| parent | 830f4021a8d5ce97c6bed267132e5e90fb166192 (diff) | |
| download | linux-71be4f81e97fe1f42c48a6dfc411dc6d3c18687f.tar.gz linux-71be4f81e97fe1f42c48a6dfc411dc6d3c18687f.tar.bz2 linux-71be4f81e97fe1f42c48a6dfc411dc6d3c18687f.zip | |
USB: debug port converter does not accept more than 8 byte packets
USB debug port only supports 8 byte rx/tx packets. Although spec implies that
"if a packet larger than eight bytes is received from the remote computer, the
device must break the larger packet into eight-byte packets before sending the
data to the Debug Port", the real PLX NET20DC device does not handle it right -
data is corrupted on debug port end if serial interface sends >8 byte urbs.
Patch below fixes the issue by limiting tx urb to 8 byte.
Signed off by: Aleks Gorelov <dared1st@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| -rw-r--r-- | drivers/usb/serial/usb_debug.c | 9 |
1 files changed, 9 insertions, 0 deletions
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c index f9fc926b56d8..9ca4d4db1ddd 100644 --- a/drivers/usb/serial/usb_debug.c +++ b/drivers/usb/serial/usb_debug.c @@ -15,6 +15,8 @@ #include <linux/usb.h> #include <linux/usb/serial.h> +#define USB_DEBUG_MAX_PACKET_SIZE 8 + static struct usb_device_id id_table [] = { { USB_DEVICE(0x0525, 0x127a) }, { }, @@ -29,6 +31,12 @@ static struct usb_driver debug_driver = { .no_dynamic_id = 1, }; +int usb_debug_open(struct usb_serial_port *port, struct file *filp) +{ + port->bulk_out_size = USB_DEBUG_MAX_PACKET_SIZE; + return usb_serial_generic_open(port, filp); +} + static struct usb_serial_driver debug_device = { .driver = { .owner = THIS_MODULE, @@ -36,6 +44,7 @@ static struct usb_serial_driver debug_device = { }, .id_table = id_table, .num_ports = 1, + .open = usb_debug_open, }; static int __init debug_init(void) |