mxc: add arch_reset() function

This patch adds arch_reset() function for all mxc platforms.

It also removes (unsused) arch/arm/mach-mx2/system.c file.

This patch has been tested on i.MX1/27/31/35

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

4 files changed, 30 insertions, 29 deletions

diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 6e1a2bffc812..950649a91540 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y	:=  system.o generic.o devices.o serial.o
+obj-y	:=  generic.o devices.o serial.o
 
 obj-$(CONFIG_MACH_MX21) += clock_imx21.o
 
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 564fd4ebf38a..055406312b69 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o
+obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
 
 obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index cd03ebaa49bc..e56241af870e 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -26,9 +26,6 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	cpu_reset(0);
-}
+void arch_reset(char mode, const char *cmd);
 
 #endif /* __ASM_ARCH_MXC_SYSTEM_H__ */
diff --git a/arch/arm/mach-mx2/system.c b/arch/arm/plat-mxc/system.c
index 92c79d4bd162..79c37577c916 100644
--- a/arch/arm/mach-mx2/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -3,6 +3,7 @@
  * Copyright (C) 2000 Deep Blue Solutions Ltd
  * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
  * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -22,42 +23,45 @@
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/err.h>
+#include <linux/delay.h>
 
 #include <mach/hardware.h>
 #include <asm/proc-fns.h>
 #include <asm/system.h>
 
-/*
- * Put the CPU into idle mode. It is called by default_idle()
- * in process.c file.
- */
-void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks.
-	 */
-	cpu_do_idle();
-}
-
-#define WDOG_WCR_REG                    IO_ADDRESS(WDOG_BASE_ADDR)
-#define WDOG_WCR_SRS                    (1 << 4)
+#ifdef CONFIG_ARCH_MX1
+#define WDOG_WCR_REG		IO_ADDRESS(WDT_BASE_ADDR)
+#define WDOG_WCR_ENABLE		(1 << 0)
+#else
+#define WDOG_WCR_REG		IO_ADDRESS(WDOG_BASE_ADDR)
+#define WDOG_WCR_ENABLE		(1 << 2)
+#endif
 
 /*
  * Reset the system. It is called by machine_restart().
  */
 void arch_reset(char mode, const char *cmd)
 {
-	struct clk *clk;
+	if (!cpu_is_mx1()) {
+		struct clk *clk;
 
-	clk = clk_get(NULL, "wdog_clk");
-	if (!clk) {
-		printk(KERN_ERR"Cannot activate the watchdog. Giving up\n");
-		return;
+		clk = clk_get_sys("imx-wdt.0", NULL);
+		if (!IS_ERR(clk))
+			clk_enable(clk);
 	}
 
-	clk_enable(clk);
-
 	/* Assert SRS signal */
-	__raw_writew(__raw_readw(WDOG_WCR_REG) & ~WDOG_WCR_SRS, WDOG_WCR_REG);
+	__raw_writew(WDOG_WCR_ENABLE, WDOG_WCR_REG);
+
+	/* wait for reset to assert... */
+	mdelay(500);
+
+	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
+
+	/* delay to allow the serial port to show the message */
+	mdelay(50);
+
+	/* we'll take a jump through zero as a poor second */
+	cpu_reset(0);
 }