Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang: "Here is the pull request from the i2c subsystem. It got a little delayed because I needed to wait for a dependency to be included (commit b424080a9e08: "reset: Add optional resets and stubs"). Plus, I had some email problems. All done now, the highlights are: - drivers can now deprecate their use of i2c classes. That shouldn't be used on embedded platforms anyhow and was often blindly copy&pasted. This mechanism gives users time to switch away and ultimately boot faster once the use of classes for those drivers is gone for good. - new drivers for QUP, Cadence, efm32 - tracepoint support for I2C and SMBus - bigger cleanups for the mv64xxx, nomadik, and designware drivers And the usual bugfixes, cleanups, feature additions. Most stuff has been in linux-next for a while. Just some hot fixes and new drivers were added a bit more recently." * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (63 commits) i2c: cadence: fix Kconfig dependency i2c: Add driver for Cadence I2C controller i2c: cadence: Document device tree bindings Documentation: i2c: improve section about flags mangling the protocol i2c: qup: use proper type fro clk_freq i2c: qup: off by ones in qup_i2c_probe() i2c: efm32: fix binding doc MAINTAINERS: update I2C web resources i2c: qup: New bus driver for the Qualcomm QUP I2C controller i2c: qup: Add device tree bindings information i2c: i2c-xiic: deprecate class based instantiation i2c: i2c-sirf: deprecate class based instantiation i2c: i2c-mv64xxx: deprecate class based instantiation i2c: i2c-designware-platdrv: deprecate class based instantiation i2c: i2c-davinci: deprecate class based instantiation i2c: i2c-bcm2835: deprecate class based instantiation i2c: mv64xxx: Fix reset controller handling i2c: omap: fix usage of IS_ERR_VALUE with pm_runtime_get_sync i2c: efm32: new bus driver i2c: exynos5: remove unnecessary cast of void pointer ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2014-04-09 08:45:40 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2014-04-09 08:45:40 -0700
commit: 39de65aa2c3eee901db020a4f1396998e09602a3 (patch)
tree: 0582450ec0b5b6b9778275b431207145d5fedfc8
parent: 97e18dc007546fce8e99098480b921a02ebb3037 (diff)
parent: 1fbeab0b8fd5e655ffef8a793b869eb7dffe0337 (diff)
download: linux-39de65aa2c3eee901db020a4f1396998e09602a3.tar.gz
linux-39de65aa2c3eee901db020a4f1396998e09602a3.tar.bz2
linux-39de65aa2c3eee901db020a4f1396998e09602a3.zip
64 files changed, 3292 insertions, 501 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
index 4fade84bea16..388f0a275fba 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
@@ -12,6 +12,7 @@ Required properties :
 - clocks: phandles to input clocks.
 
 Optional properties:
+- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000
 - Child nodes conforming to i2c bus binding
 
 Examples :
@@ -23,6 +24,7 @@ i2c0: i2c@fff84000 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	clocks = <&twi0_clk>;
+	clock-frequency = <400000>;
 
 	24c512@50 {
 		compatible = "24c512";
diff --git a/Documentation/devicetree/bindings/i2c/i2c-cadence.txt b/Documentation/devicetree/bindings/i2c/i2c-cadence.txt
new file mode 100644
index 000000000000..7cb0b5608f49
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-cadence.txt
@@ -0,0 +1,24 @@
+Binding for the Cadence I2C controller
+
+Required properties:
+  - reg: Physical base address and size of the controller's register area.
+  - compatible: Compatibility string. Must be 'cdns,i2c-r1p10'.
+  - clocks: Input clock specifier. Refer to common clock bindings.
+  - interrupts: Interrupt specifier. Refer to interrupt bindings.
+  - #address-cells: Should be 1.
+  - #size-cells: Should be 0.
+
+Optional properties:
+  - clock-frequency: Desired operating frequency, in Hz, of the bus.
+  - clock-names: Input clock name, should be 'pclk'.
+
+Example:
+	i2c@e0004000 {
+		compatible = "cdns,i2c-r1p10";
+		clocks = <&clkc 38>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0xe0004000 0x1000>;
+		clock-frequency = <400000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
index 7fd7fa25e9b0..5199b0c8cf7a 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
@@ -14,6 +14,12 @@ Optional properties :
  - i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds.
    This option is only supported in hardware blocks version 1.11a or newer.
 
+ - i2c-scl-falling-time : should contain the SCL falling time in nanoseconds.
+   This value which is by default 300ns is used to compute the tLOW period.
+
+ - i2c-sda-falling-time : should contain the SDA falling time in nanoseconds.
+   This value which is by default 300ns is used to compute the tHIGH period.
+
 Example :
 
 	i2c@f0000 {
@@ -34,4 +40,6 @@ Example :
 		interrupts = <12 1>;
 		clock-frequency = <400000>;
 		i2c-sda-hold-time-ns = <300>;
+		i2c-sda-falling-time-ns = <300>;
+		i2c-scl-falling-time-ns = <300>;
 	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
new file mode 100644
index 000000000000..fc15ac519437
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
@@ -0,0 +1,34 @@
+* Energymicro efm32 i2c controller
+
+Required properties :
+
+ - reg : Offset and length of the register set for the device
+ - compatible : should be "energymicro,efm32-i2c"
+ - interrupts : the interrupt number
+ - clocks : reference to the module clock
+
+Recommended properties :
+
+ - clock-frequency : maximal I2C bus clock frequency in Hz.
+ - efm32,location : Decides the location of the USART I/O pins.
+   Allowed range : [0 .. 6]
+
+Example:
+	i2c0: i2c@4000a000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "energymicro,efm32-i2c";
+		reg = <0x4000a000 0x400>;
+		interrupts = <9>;
+		clocks = <&cmu clk_HFPERCLKI2C0>;
+		clock-frequency = <100000>;
+		status = "ok";
+		efm32,location = <3>;
+
+		eeprom@50 {
+			compatible = "microchip,24c02";
+			reg = <0x50>;
+			pagesize = <16>;
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
index 582b4652a82a..befd4fb4764f 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
@@ -4,12 +4,16 @@
 Required properties :
 
  - reg             : Offset and length of the register set for the device
- - compatible      : Should be "marvell,mv64xxx-i2c" or "allwinner,sun4i-i2c"
-                     or "marvell,mv78230-i2c" or "marvell,mv78230-a0-i2c"
-                     Note: Only use "marvell,mv78230-a0-i2c" for a very rare,
-                     initial version of the SoC which had broken offload
-                     support.  Linux auto-detects this and sets it
-                     appropriately.
+ - compatible      : Should be either:
+                     - "allwinner,sun4i-i2c"
+                     - "allwinner,sun6i-a31-i2c"
+                     - "marvell,mv64xxx-i2c"
+                     - "marvell,mv78230-i2c"
+                     - "marvell,mv78230-a0-i2c"
+                       * Note: Only use "marvell,mv78230-a0-i2c" for a
+                         very rare, initial version of the SoC which
+                         had broken offload support.  Linux
+                         auto-detects this and sets it appropriately.
  - interrupts      : The interrupt number
 
 Optional properties :
@@ -17,6 +21,10 @@ Optional properties :
  - clock-frequency : Desired I2C bus clock frequency in Hz. If not set the
 default frequency is 100kHz
 
+ - resets          : phandle to the parent reset controller. Mandatory
+                     whenever you're using the "allwinner,sun6i-a31-i2c"
+                     compatible.
+
 Examples:
 
 	i2c@11000 {
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
index 897cfcd5ce92..dd8b2dd1edeb 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
@@ -6,6 +6,7 @@ Required properties:
 	"renesas,i2c-r8a7778"
 	"renesas,i2c-r8a7779"
 	"renesas,i2c-r8a7790"
+	"renesas,i2c-r8a7791"
 - reg: physical base address of the controller and length of memory mapped
   region.
 - interrupts: interrupt specifier.
@@ -13,11 +14,16 @@ Required properties:
 Optional properties:
 - clock-frequency: desired I2C bus clock frequency in Hz. The absence of this
   propoerty indicates the default frequency 100 kHz.
+- clocks: clock specifier.
 
 Examples :
 
-i2c0: i2c@e6500000 {
-	compatible = "renesas,i2c-rcar-h2";
-	reg = <0 0xe6500000 0 0x428>;
-	interrupts = <0 174 0x4>;
+i2c0: i2c@e6508000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "renesas,i2c-r8a7791";
+	reg = <0 0xe6508000 0 0x40>;
+	interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
+	clock-frequency = <400000>;
 };
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
new file mode 100644
index 000000000000..dc71754a56af
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
@@ -0,0 +1,40 @@
+Qualcomm Universal Peripheral (QUP) I2C controller
+
+Required properties:
+ - compatible: Should be:
+   * "qcom,i2c-qup-v1.1.1" for 8660, 8960 and 8064.
+   * "qcom,i2c-qup-v2.1.1" for 8974 v1.
+   * "qcom,i2c-qup-v2.2.1" for 8974 v2 and later.
+ - reg: Should contain QUP register address and length.
+ - interrupts: Should contain I2C interrupt.
+
+ - clocks: A list of phandles + clock-specifiers, one for each entry in
+   clock-names.
+ - clock-names: Should contain:
+   * "core" for the core clock
+   * "iface" for the AHB clock
+
+ - #address-cells: Should be <1> Address cells for i2c device address
+ - #size-cells: Should be <0> as i2c addresses have no size component
+
+Optional properties:
+ - clock-frequency: Should specify the desired i2c bus clock frequency in Hz,
+                    defaults to 100kHz if omitted.
+
+Child nodes should conform to i2c bus binding.
+
+Example:
+
+ i2c@f9924000 {
+ 	compatible = "qcom,i2c-qup-v2.2.1";
+ 	reg = <0xf9924000 0x1000>;
+ 	interrupts = <0 96 0>;
+
+ 	clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ 	clock-names = "core", "iface";
+
+ 	clock-frequency = <355000>;
+
+ 	#address-cells = <1>;
+ 	#size-cells = <0>;
+ };
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index aaaf069306a3..adf5e33e8312 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -26,6 +26,7 @@ Supported adapters:
   * Intel Wellsburg (PCH)
   * Intel Coleto Creek (PCH)
   * Intel Wildcat Point-LP (PCH)
+  * Intel BayTrail (SOC)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/Documentation/i2c/functionality b/Documentation/i2c/functionality
index b0ff2ab596ce..4556a3eb87c4 100644
--- a/Documentation/i2c/functionality
+++ b/Documentation/i2c/functionality
@@ -46,7 +46,7 @@ A few combinations of the above flags are also defined for your convenience:
                                   and write_block_data commands
   I2C_FUNC_SMBUS_I2C_BLOCK        Handles the SMBus read_i2c_block_data
                                   and write_i2c_block_data commands
-  I2C_FUNC_SMBUS_EMUL             Handles all SMBus commands than can be
+  I2C_FUNC_SMBUS_EMUL             Handles all SMBus commands that can be
                                   emulated by a real I2C adapter (using
                                   the transparent emulation layer)
 
diff --git a/Documentation/i2c/i2c-protocol b/Documentation/i2c/i2c-protocol
index 0b3e62d1f77a..ff6d6cee6c7e 100644
--- a/Documentation/i2c/i2c-protocol
+++ b/Documentation/i2c/i2c-protocol
@@ -6,8 +6,8 @@ Key to symbols
 S     (1 bit) : Start bit
 P     (1 bit) : Stop bit
 Rd/Wr (1 bit) : Read/Write bit. Rd equals 1, Wr equals 0.
-A, NA (1 bit) : Accept and reverse accept bit. 
-Addr  (7 bits): I2C 7 bit address. Note that this can be expanded as usual to 
+A, NA (1 bit) : Accept and reverse accept bit.
+Addr  (7 bits): I2C 7 bit address. Note that this can be expanded as usual to
                 get a 10 bit I2C address.
 Comm  (8 bits): Command byte, a data byte which often selects a register on
                 the device.
@@ -49,11 +49,20 @@ a byte read, followed by a byte write:
 Modified transactions
 =====================
 
-The following modifications to the I2C protocol can also be generated,
-with the exception of I2C_M_NOSTART these are usually only needed to
-work around device issues:
+The following modifications to the I2C protocol can also be generated by
+setting these flags for i2c messages. With the exception of I2C_M_NOSTART, they
+are usually only needed to work around device issues:
 
-  Flag I2C_M_NOSTART: 
+I2C_M_IGNORE_NAK:
+    Normally message is interrupted immediately if there is [NA] from the
+    client. Setting this flag treats any [NA] as [A], and all of
+    message is sent.
+    These messages may still fail to SCL lo->hi timeout.
+
+I2C_M_NO_RD_ACK:
+    In a read message, master A/NA bit is skipped.
+
+I2C_M_NOSTART:
     In a combined transaction, no 'S Addr Wr/Rd [A]' is generated at some
     point. For example, setting I2C_M_NOSTART on the second partial message
     generates something like:
@@ -67,17 +76,13 @@ work around device issues:
     I2C device but may also be used between direction changes by some
     rare devices.
 
-  Flags I2C_M_REV_DIR_ADDR
+I2C_M_REV_DIR_ADDR:
     This toggles the Rd/Wr flag. That is, if you want to do a write, but
     need to emit an Rd instead of a Wr, or vice versa, you set this
     flag. For example:
       S Addr Rd [A] Data [A] Data [A] ... [A] Data [A] P
 
-  Flags I2C_M_IGNORE_NAK
-    Normally message is interrupted immediately if there is [NA] from the
-    client. Setting this flag treats any [NA] as [A], and all of
-    message is sent.
-    These messages may still fail to SCL lo->hi timeout.
-
-  Flags I2C_M_NO_RD_ACK
-    In a read message, master A/NA bit is skipped.
+I2C_M_STOP:
+    Force a stop condition (P) after the message. Some I2C related protocols
+    like SCCB require that. Normally, you really don't want to get interrupted
+    between the messages of one transfer.
diff --git a/MAINTAINERS b/MAINTAINERS
index a769432bddbe..beaa87a6e7fa 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1427,6 +1427,7 @@ F:	drivers/cpuidle/cpuidle-zynq.c
 N:	zynq
 N:	xilinx
 F:	drivers/clocksource/cadence_ttc_timer.c
+F:	drivers/i2c/busses/i2c-cadence.c
 F:	drivers/mmc/host/sdhci-of-arasan.c
 
 ARM SMMU DRIVER
@@ -4308,7 +4309,8 @@ F:	drivers/i2c/i2c-stub.c
 I2C SUBSYSTEM
 M:	Wolfram Sang <wsa@the-dreams.de>
 L:	linux-i2c@vger.kernel.org
-W:	http://i2c.wiki.kernel.org/
+W:	https://i2c.wiki.kernel.org/
+Q:	https://patchwork.ozlabs.org/project/linux-i2c/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git
 S:	Maintained
 F:	Documentation/i2c/
diff --git a/arch/blackfin/include/asm/bfin_twi.h b/arch/blackfin/include/asm/bfin_twi.h
index 90c3c006557d..aaa0834d34aa 100644
--- a/arch/blackfin/include/asm/bfin_twi.h
+++ b/arch/blackfin/include/asm/bfin_twi.h
@@ -9,60 +9,7 @@
 #ifndef __ASM_BFIN_TWI_H__
 #define __ASM_BFIN_TWI_H__
 
-#include <linux/types.h>
-#include <linux/i2c.h>
-
-/*
- * All Blackfin system MMRs are padded to 32bits even if the register
- * itself is only 16bits.  So use a helper macro to streamline this.
- */
-#define __BFP(m) u16 m; u16 __pad_##m
-
-/*
- * bfin twi registers layout
- */
-struct bfin_twi_regs {
-	__BFP(clkdiv);
-	__BFP(control);
-	__BFP(slave_ctl);
-	__BFP(slave_stat);
-	__BFP(slave_addr);
-	__BFP(master_ctl);
-	__BFP(master_stat);
-	__BFP(master_addr);
-	__BFP(int_stat);
-	__BFP(int_mask);
-	__BFP(fifo_ctl);
-	__BFP(fifo_stat);
-	u32 __pad[20];
-	__BFP(xmt_data8);
-	__BFP(xmt_data16);
-	__BFP(rcv_data8);
-	__BFP(rcv_data16);
-};
-
-#undef __BFP
-
-struct bfin_twi_iface {
-	int			irq;
-	spinlock_t		lock;
-	char			read_write;
-	u8			command;
-	u8			*transPtr;
-	int			readNum;
-	int			writeNum;
-	int			cur_mode;
-	int			manual_stop;
-	int			result;
-	struct i2c_adapter	adap;
-	struct completion	complete;
-	struct i2c_msg		*pmsg;
-	int			msg_num;
-	int			cur_msg;
-	u16			saved_clkdiv;
-	u16			saved_control;
-	struct bfin_twi_regs __iomem *regs_base;
-};
+#include <asm/blackfin.h>
 
 #define DEFINE_TWI_REG(reg_name, reg) \
 static inline u16 read_##reg_name(struct bfin_twi_iface *iface) \
@@ -71,7 +18,6 @@ static inline void write_##reg_name(struct bfin_twi_iface *iface, u16 v) \
 	{ bfin_write16(&iface->regs_base->reg, v); }
 
 DEFINE_TWI_REG(CLKDIV, clkdiv)
-DEFINE_TWI_REG(CONTROL, control)
 DEFINE_TWI_REG(SLAVE_CTL, slave_ctl)
 DEFINE_TWI_REG(SLAVE_STAT, slave_stat)
 DEFINE_TWI_REG(SLAVE_ADDR, slave_addr)
@@ -80,7 +26,6 @@ DEFINE_TWI_REG(MASTER_STAT, master_stat)
 DEFINE_TWI_REG(MASTER_ADDR, master_addr)
 DEFINE_TWI_REG(INT_STAT, int_stat)
 DEFINE_TWI_REG(INT_MASK, int_mask)
-DEFINE_TWI_REG(FIFO_CTL, fifo_ctl)
 DEFINE_TWI_REG(FIFO_STAT, fifo_stat)
 DEFINE_TWI_REG(XMT_DATA8, xmt_data8)
 DEFINE_TWI_REG(XMT_DATA16, xmt_data16)
@@ -113,75 +58,25 @@ static inline u16 read_RCV_DATA16(struct bfin_twi_iface *iface)
 }
 #endif
 
+static inline u16 read_FIFO_CTL(struct bfin_twi_iface *iface)
+{
+	return bfin_read16(&iface->regs_base->fifo_ctl);
+}
 
-/*  ********************  TWO-WIRE INTERFACE (TWI) MASKS  ***********************/
-/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y);  )				*/
-#define	CLKLOW(x)	((x) & 0xFF)	/* Periods Clock Is Held Low                    */
-#define CLKHI(y)	(((y)&0xFF)<<0x8)	/* Periods Before New Clock Low                 */
-
-/* TWI_PRESCALE Masks															*/
-#define	PRESCALE	0x007F	/* SCLKs Per Internal Time Reference (10MHz)    */
-#define	TWI_ENA		0x0080	/* TWI Enable                                                                   */
-#define	SCCB		0x0200	/* SCCB Compatibility Enable                                    */
-
-/* TWI_SLAVE_CTL Masks															*/
-#define	SEN			0x0001	/* Slave Enable                                                                 */
-#define	SADD_LEN	0x0002	/* Slave Address Length                                                 */
-#define	STDVAL		0x0004	/* Slave Transmit Data Valid                                    */
-#define	NAK			0x0008	/* NAK/ACK* Generated At Conclusion Of Transfer */
-#define	GEN			0x0010	/* General Call Address Matching Enabled                */
-
-/* TWI_SLAVE_STAT Masks															*/
-#define	SDIR		0x0001	/* Slave Transfer Direction (Transmit/Receive*) */
-#define GCALL		0x0002	/* General Call Indicator                                               */
-
-/* TWI_MASTER_CTL Masks													*/
-#define	MEN			0x0001	/* Master Mode Enable                                           */
-#define	MADD_LEN	0x0002	/* Master Address Length                                        */
-#define	MDIR		0x0004	/* Master Transmit Direction (RX/TX*)           */
-#define	FAST		0x0008	/* Use Fast Mode Timing Specs                           */
-#define	STOP		0x0010	/* Issue Stop Condition                                         */
-#define	RSTART		0x0020	/* Repeat Start or Stop* At End Of Transfer     */
-#define	DCNT		0x3FC0	/* Data Bytes To Transfer                                       */
-#define	SDAOVR		0x4000	/* Serial Data Override                                         */
-#define	SCLOVR		0x8000	/* Serial Clock Override                                        */
-
-/* TWI_MASTER_STAT Masks														*/
-#define	MPROG		0x0001	/* Master Transfer In Progress                                  */
-#define	LOSTARB		0x0002	/* Lost Arbitration Indicator (Xfer Aborted)    */
-#define	ANAK		0x0004	/* Address Not Acknowledged                                             */
-#define	DNAK		0x0008	/* Data Not Acknowledged                                                */
-#define	BUFRDERR	0x0010	/* Buffer Read Error                                                    */
-#define	BUFWRERR	0x0020	/* Buffer Write Error                                                   */
-#define	SDASEN		0x0040	/* Serial Data Sense                                                    */
-#define	SCLSEN		0x0080	/* Serial Clock Sense                                                   */
-#define	BUSBUSY		0x0100	/* Bus Busy Indicator                                                   */
-
-/* TWI_INT_SRC and TWI_INT_ENABLE Masks						*/
-#define	SINIT		0x0001	/* Slave Transfer Initiated     */
-#define	SCOMP		0x0002	/* Slave Transfer Complete      */
-#define	SERR		0x0004	/* Slave Transfer Error         */
-#define	SOVF		0x0008	/* Slave Overflow                       */
-#define	MCOMP		0x0010	/* Master Transfer Complete     */
-#define	MERR		0x0020	/* Master Transfer Error        */
-#define	XMTSERV		0x0040	/* Transmit FIFO Service        */
-#define	RCVSERV		0x0080	/* Receive FIFO Service         */
-
-/* TWI_FIFO_CTRL Masks												*/
-#define	XMTFLUSH	0x0001	/* Transmit Buffer Flush                        */
-#define	RCVFLUSH	0x0002	/* Receive Buffer Flush                         */
-#define	XMTINTLEN	0x0004	/* Transmit Buffer Interrupt Length     */
-#define	RCVINTLEN	0x0008	/* Receive Buffer Interrupt Length      */
-
-/* TWI_FIFO_STAT Masks															*/
-#define	XMTSTAT		0x0003	/* Transmit FIFO Status                                                 */
-#define	XMT_EMPTY	0x0000	/*              Transmit FIFO Empty                                             */
-#define	XMT_HALF	0x0001	/*              Transmit FIFO Has 1 Byte To Write               */
-#define	XMT_FULL	0x0003	/*              Transmit FIFO Full (2 Bytes To Write)   */
+static inline void write_FIFO_CTL(struct bfin_twi_iface *iface, u16 v)
+{
+	bfin_write16(&iface->regs_base->fifo_ctl, v);
+	SSYNC();
+}
 
-#define	RCVSTAT		0x000C	/* Receive FIFO Status                                                  */
-#define	RCV_EMPTY	0x0000	/*              Receive FIFO Empty                                              */
-#define	RCV_HALF	0x0004	/*              Receive FIFO Has 1 Byte To Read                 */
-#define	RCV_FULL	0x000C	/*              Receive FIFO Full (2 Bytes To Read)             */
+static inline u16 read_CONTROL(struct bfin_twi_iface *iface)
+{
+	return bfin_read16(&iface->regs_base->control);
+}
 
+static inline void write_CONTROL(struct bfin_twi_iface *iface, u16 v)
+{
+	SSYNC();
+	bfin_write16(&iface->regs_base->control, v);
+}
 #endif
diff --git a/arch/blackfin/kernel/debug-mmrs.c b/arch/blackfin/kernel/debug-mmrs.c
index 01232a13470d..947ad0832338 100644
--- a/arch/blackfin/kernel/debug-mmrs.c
+++ b/arch/blackfin/kernel/debug-mmrs.c
@@ -10,6 +10,7 @@
 #include <linux/fs.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/i2c/bfin_twi.h>
 
 #include <asm/blackfin.h>
 #include <asm/gpio.h>
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 014afab1d551..c94db1c5e353 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -110,6 +110,7 @@ config I2C_I801
 	    Wellsburg (PCH)
 	    Coleto Creek (PCH)
 	    Wildcat Point-LP (PCH)
+	    BayTrail (SOC)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
@@ -375,6 +376,13 @@ config I2C_BLACKFIN_TWI_CLK_KHZ
 	help
 	  The unit of the TWI clock is kHz.
 
+config I2C_CADENCE
+	tristate "Cadence I2C Controller"
+	depends on ARCH_ZYNQ
+	help
+	  Say yes here to select Cadence I2C Host Controller. This controller is
+	  e.g. used by Xilinx Zynq.
+
 config I2C_CBUS_GPIO
 	tristate "CBUS I2C driver"
 	depends on GPIOLIB
@@ -432,6 +440,13 @@ config I2C_DESIGNWARE_PCI
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-designware-pci.
 
+config I2C_EFM32
+	tristate "EFM32 I2C controller"
+	depends on ARCH_EFM32 || COMPILE_TEST
+	help
+	  This driver supports the i2c block found in Energy Micro's EFM32
+	  SoCs.
+
 config I2C_EG20T
 	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) I2C"
 	depends on PCI
@@ -527,7 +542,7 @@ config I2C_MPC
 
 config I2C_MV64XXX
 	tristate "Marvell mv64xxx I2C Controller"
-	depends on (MV64X60 || PLAT_ORION || ARCH_SUNXI)
+	depends on MV64X60 || PLAT_ORION || ARCH_SUNXI
 	help
 	  If you say yes to this option, support will be included for the
 	  built-in I2C interface on the Marvell 64xxx line of host bridges.
@@ -648,6 +663,16 @@ config I2C_PXA_SLAVE
 	  is necessary for systems where the PXA may be a target on the
 	  I2C bus.
 
+config I2C_QUP
+	tristate "Qualcomm QUP based I2C controller"
+	depends on ARCH_QCOM
+	help
+	  If you say yes to this option, support will be included for the
+	  built-in I2C interface on the Qualcomm SoCs.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-qup.
+
 config I2C_RIIC
 	tristate "Renesas RIIC adapter"
 	depends on ARCH_SHMOBILE || COMPILE_TEST
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index a08931fe73e1..18d18ff9db93 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_I2C_AT91)		+= i2c-at91.o
 obj-$(CONFIG_I2C_AU1550)	+= i2c-au1550.o
 obj-$(CONFIG_I2C_BCM2835)	+= i2c-bcm2835.o
 obj-$(CONFIG_I2C_BLACKFIN_TWI)	+= i2c-bfin-twi.o
+obj-$(CONFIG_I2C_CADENCE)	+= i2c-cadence.o
 obj-$(CONFIG_I2C_CBUS_GPIO)	+= i2c-cbus-gpio.o
 obj-$(CONFIG_I2C_CPM)		+= i2c-cpm.o
 obj-$(CONFIG_I2C_DAVINCI)	+= i2c-davinci.o
@@ -41,6 +42,7 @@ obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM)	+= i2c-designware-platform.o
 i2c-designware-platform-objs := i2c-designware-platdrv.o
 obj-$(CONFIG_I2C_DESIGNWARE_PCI)	+= i2c-designware-pci.o
 i2c-designware-pci-objs := i2c-designware-pcidrv.o
+obj-$(CONFIG_I2C_EFM32)		+= i2c-efm32.o
 obj-$(CONFIG_I2C_EG20T)		+= i2c-eg20t.o
 obj-$(CONFIG_I2C_EXYNOS5)	+= i2c-exynos5.o
 obj-$(CONFIG_I2C_GPIO)		+= i2c-gpio.o
@@ -63,6 +65,7 @@ obj-$(CONFIG_I2C_PNX)		+= i2c-pnx.o
 obj-$(CONFIG_I2C_PUV3)		+= i2c-puv3.o
 obj-$(CONFIG_I2C_PXA)		+= i2c-pxa.o
 obj-$(CONFIG_I2C_PXA_PCI)	+= i2c-pxa-pci.o
+obj-$(CONFIG_I2C_QUP)		+= i2c-qup.o
 obj-$(CONFIG_I2C_RIIC)		+= i2c-riic.o
 obj-$(CONFIG_I2C_S3C2410)	+= i2c-s3c2410.o
 obj-$(CONFIG_I2C_S6000)		+= i2c-s6000.o
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index 7d60d3a1f621..451e305f7971 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -494,7 +494,7 @@ static struct i2c_adapter ali1535_adapter = {
 	.algo		= &smbus_algorithm,
 };
 
-static DEFINE_PCI_DEVICE_TABLE(ali1535_ids) = {
+static const struct pci_device_id ali1535_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101) },
 	{ },
 };
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index 4611e4754a67..98a1c97739ba 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -416,7 +416,7 @@ static void ali1563_remove(struct pci_dev *dev)
 	ali1563_shutdown(dev);
 }
 
-static DEFINE_PCI_DEVICE_TABLE(ali1563_id_table) = {
+static const struct pci_device_id ali1563_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1563) },
 	{},
 };
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index 4823206a4870..2fa21ce9682b 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -476,7 +476,7 @@ static struct i2c_adapter ali15x3_adapter = {
 	.algo		= &smbus_algorithm,
 };
 
-static DEFINE_PCI_DEVICE_TABLE(ali15x3_ids) = {
+static const struct pci_device_id ali15x3_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101) },
 	{ 0, }
 };
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 819d3c1062a7..a16f72891358 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -307,7 +307,7 @@ static const char* chipname[] = {
 	"nVidia nForce", "AMD8111",
 };
 
-static DEFINE_PCI_DEVICE_TABLE(amd756_ids) = {
+static const struct pci_device_id amd756_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_740B),
 	  .driver_data = AMD756 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7413),
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index f3d4d79855b5..95a80a8f81b5 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -414,7 +414,7 @@ static const struct i2c_algorithm smbus_algorithm = {
 };
 
 
-static DEFINE_PCI_DEVICE_TABLE(amd8111_ids) = {
+static const struct pci_device_id amd8111_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS2) },
 	{ 0, }
 };
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 843d01268ae9..e95f9ba96790 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -32,7 +32,7 @@
 #include <linux/slab.h>
 #include <linux/platform_data/dma-atmel.h>
 
-#define TWI_CLK_HZ		100000			/* max 400 Kbits/s */
+#define DEFAULT_TWI_CLK_HZ		100000		/* max 400 Kbits/s */
 #define AT91_I2C_TIMEOUT	msecs_to_jiffies(100)	/* transfer timeout */
 #define AT91_I2C_DMA_THRESHOLD	8			/* enable DMA if transfer size is bigger than this threshold */
 
@@ -711,6 +711,7 @@ static int at91_twi_probe(struct platform_device *pdev)
 	struct resource *mem;
 	int rc;
 	u32 phy_addr;
+	u32 bus_clk_rate;
 
 	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
 	if (!dev)
@@ -756,13 +757,18 @@ static int at91_twi_probe(struct platform_device *pdev)
 			dev->use_dma = true;
 	}
 
-	at91_calc_twi_clock(dev, TWI_CLK_HZ);
+	rc = of_property_read_u32(dev->dev->of_node, "clock-frequency",
+			&bus_clk_rate);
+	if (rc)
+		bus_clk_rate = DEFAULT_TWI_CLK_HZ;
+
+	at91_calc_twi_clock(dev, bus_clk_rate);
 	at91_init_twi_bus(dev);
 
 	snprintf(dev->adapter.name, sizeof(dev->adapter.name), "AT91");
 	i2c_set_adapdata(&dev->adapter, dev);
 	dev->adapter.owner = THIS_MODULE;
-	dev->adapter.class = I2C_CLASS_HWMON;
+	dev->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED;
 	dev->adapter.algo = &at91_twi_algorithm;
 	dev->adapter.dev.parent = dev->dev;
 	dev->adapter.nr = pdev->id;
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index 77df97b932af..c60719577fc3 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -219,7 +219,7 @@ static const struct i2c_algorithm bcm2835_i2c_algo = {
 static int bcm2835_i2c_probe(struct platform_device *pdev)
 {
 	struct bcm2835_i2c_dev *i2c_dev;
-	struct resource *mem, *requested, *irq;
+	struct resource *mem, *irq;
 	u32 bus_clk_rate, divider;
 	int ret;
 	struct i2c_adapter *adap;
@@ -234,25 +234,9 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
 	init_completion(&i2c_dev->completion);
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		dev_err(&pdev->dev, "No mem resource\n");
-		return -ENODEV;
-	}
-
-	requested = devm_request_mem_region(&pdev->dev, mem->start,
-					    resource_size(mem),
-					    dev_name(&pdev->dev));
-	if (!requested) {
-		dev_err(&pdev->dev, "Could not claim register region\n");
-		return -EBUSY;
-	}
-
-	i2c_dev->regs = devm_ioremap(&pdev->dev, mem->start,
-				     resource_size(mem));
-	if (!i2c_dev->regs) {
-		dev_err(&pdev->dev, "Could not map registers\n");
-		return -ENOMEM;
-	}
+	i2c_dev->regs = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(i2c_dev->regs))
+		return PTR_ERR(i2c_dev->regs);
 
 	i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(i2c_dev->clk)) {
@@ -295,7 +279,7 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
 	adap = &i2c_dev->adapter;
 	i2c_set_adapdata(adap, i2c_dev);
 	adap->owner = THIS_MODULE;
-	adap->class = I2C_CLASS_HWMON;
+	adap->class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED;
 	strlcpy(adap->name, "bcm2835 I2C adapter", sizeof(adap->name));
 	adap->algo = &bcm2835_i2c_algo;
 	adap->dev.parent = &pdev->dev;
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 3b9bd9a3f2b0..e6d5162b6379 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -21,10 +21,10 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/i2c/bfin_twi.h>
 
-#include <asm/blackfin.h>
-#include <asm/portmux.h>
 #include <asm/irq.h>
+#include <asm/portmux.h>
 #include <asm/bfin_twi.h>
 
 /* SMBus mode*/
@@ -65,7 +65,6 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
 		/* Transmit next data */
 		while (iface->writeNum > 0 &&
 			(read_FIFO_STAT(iface) & XMTSTAT) != XMT_FULL) {
-			SSYNC();
 			write_XMT_DATA8(iface, *(iface->transPtr++));
 			iface->writeNum--;
 		}
@@ -248,7 +247,6 @@ static irqreturn_t bfin_twi_interrupt_entry(int irq, void *dev_id)
 		/* Clear interrupt status */
 		write_INT_STAT(iface, twi_int_status);
 		bfin_twi_handle_interrupt(iface, twi_int_status);
-		SSYNC();
 	}
 	spin_unlock_irqrestore(&iface->lock, flags);
 	return IRQ_HANDLED;
@@ -294,9 +292,7 @@ static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
 	 *  discarded before start a new operation.
 	 */
 	write_FIFO_CTL(iface, 0x3);
-	SSYNC();
 	write_FIFO_CTL(iface, 0);
-	SSYNC();
 
 	if (pmsg->flags & I2C_M_RD)
 		iface->read_write = I2C_SMBUS_READ;
@@ -306,7 +302,6 @@ static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
 		if (iface->writeNum > 0) {
 			write_XMT_DATA8(iface, *(iface->transPtr++));
 			iface->writeNum--;
-			SSYNC();
 		}
 	}
 
@@ -315,7 +310,6 @@ static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
 
 	/* Interrupt mask . Enable XMT, RCV interrupt */
 	write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV);
-	SSYNC();
 
 	if (pmsg->len <= 255)
 		write_MASTER_CTL(iface, pmsg->len << 6);
@@ -329,7 +323,6 @@ static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
 		(iface->msg_num > 1 ? RSTART : 0) |
 		((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
 		((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
-	SSYNC();
 
 	while (!iface->result) {
 		if (!wait_for_completion_timeout(&iface->complete,
@@ -453,7 +446,6 @@ int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 	 * start a new operation.
 	 */
 	write_FIFO_CTL(iface, 0x3);
-	SSYNC();
 	write_FIFO_CTL(iface, 0);
 
 	/* clear int stat */
@@ -461,7 +453,6 @@ int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 
 	/* Set Transmit device address */
 	write_MASTER_ADDR(iface, addr);
-	SSYNC();
 
 	switch (iface->cur_mode) {
 	case TWI_I2C_MODE_STANDARDSUB:
@@ -469,7 +460,6 @@ int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 		write_INT_MASK(iface, MCOMP | MERR |
 			((iface->read_write == I2C_SMBUS_READ) ?
 			RCVSERV : XMTSERV));
-		SSYNC();
 
 		if (iface->writeNum + 1 <= 255)
 			write_MASTER_CTL(iface, (iface->writeNum + 1) << 6);
@@ -484,7 +474,6 @@ int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 	case TWI_I2C_MODE_COMBINED:
 		write_XMT_DATA8(iface, iface->command);
 		write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV);
-		SSYNC();
 
 		if (iface->writeNum > 0)
 			write_MASTER_CTL(iface, (iface->writeNum + 1) << 6);
@@ -531,7 +520,6 @@ int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 		write_INT_MASK(iface, MCOMP | MERR |
 			((iface->read_write == I2C_SMBUS_READ) ?
 			RCVSERV : XMTSERV));
-		SSYNC();
 
 		/* Master enable */
 		write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
@@ -539,7 +527,6 @@ int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 			((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
 		break;
 	}
-	SSYNC();
 
 	while (!iface->result) {
 		if (!wait_for_completion_timeout(&iface->complete,
@@ -669,7 +656,7 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
 	strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name));
 	p_adap->algo = &bfin_twi_algorithm;
 	p_adap->algo_data = iface;
-	p_adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+	p_adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED;
 	p_adap->dev.parent = &pdev->dev;
 	p_adap->timeout = 5 * HZ;
 	p_adap->retries = 3;
@@ -704,7 +691,6 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
 
 	/* Enable TWI */
 	write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA);
-	SSYNC();
 
 	rc = i2c_add_numbered_adapter(p_adap);
 	if (rc < 0) {
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
new file mode 100644
index 000000000000..63f3f03ecc9b
--- /dev/null
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -0,0 +1,905 @@
+/*
+ * I2C bus driver for the Cadence I2C controller.
+ *
+ * Copyright (C) 2009 - 2014 Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it
+ * and/or modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2 of the License, or (at your option) any
+ * later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+/* Register offsets for the I2C device. */
+#define CDNS_I2C_CR_OFFSET		0x00 /* Control Register, RW */
+#define CDNS_I2C_SR_OFFSET		0x04 /* Status Register, RO */
+#define CDNS_I2C_ADDR_OFFSET		0x08 /* I2C Address Register, RW */
+#define CDNS_I2C_DATA_OFFSET		0x0C /* I2C Data Register, RW */
+#define CDNS_I2C_ISR_OFFSET		0x10 /* IRQ Status Register, RW */
+#define CDNS_I2C_XFER_SIZE_OFFSET	0x14 /* Transfer Size Register, RW */
+#define CDNS_I2C_TIME_OUT_OFFSET	0x1C /* Time Out Register, RW */
+#define CDNS_I2C_IER_OFFSET		0x24 /* IRQ Enable Register, WO */
+#define CDNS_I2C_IDR_OFFSET		0x28 /* IRQ Disable Register, WO */
+
+/* Control Register Bit mask definitions */
+#define CDNS_I2C_CR_HOLD		BIT(4) /* Hold Bus bit */
+#define CDNS_I2C_CR_ACK_EN		BIT(3)
+#define CDNS_I2C_CR_NEA			BIT(2)
+#define CDNS_I2C_CR_MS			BIT(1)
+/* Read or Write Master transfer 0 = Transmitter, 1 = Receiver */
+#define CDNS_I2C_CR_RW			BIT(0)
+/* 1 = Auto init FIFO to zeroes */
+#define CDNS_I2C_CR_CLR_FIFO		BIT(6)
+#define CDNS_I2C_CR_DIVA_SHIFT		14
+#define CDNS_I2C_CR_DIVA_MASK		(3 << CDNS_I2C_CR_DIVA_SHIFT)
+#define CDNS_I2C_CR_DIVB_SHIFT		8
+#define CDNS_I2C_CR_DIVB_MASK		(0x3f << CDNS_I2C_CR_DIVB_SHIFT)
+
+/* Status Register Bit mask definitions */
+#define CDNS_I2C_SR_BA		BIT(8)
+#define CDNS_I2C_SR_RXDV	BIT(5)
+
+/*
+ * I2C Address Register Bit mask definitions
+ * Normal addressing mode uses [6:0] bits. Extended addressing mode uses [9:0]
+ * bits. A write access to this register always initiates a transfer if the I2C
+ * is in master mode.
+ */
+#define CDNS_I2C_ADDR_MASK	0x000003FF /* I2C Address Mask */
+
+/*
+ * I2C Interrupt Registers Bit mask definitions
+ * All the four interrupt registers (Status/Mask/Enable/Disable) have the same
+ * bit definitions.
+ */
+#define CDNS_I2C_IXR_ARB_LOST		BIT(9)
+#define CDNS_I2C_IXR_RX_UNF		BIT(7)
+#define CDNS_I2C_IXR_TX_OVF		BIT(6)
+#define CDNS_I2C_IXR_RX_OVF		BIT(5)
+#define CDNS_I2C_IXR_SLV_RDY		BIT(4)
+#define CDNS_I2C_IXR_TO			BIT(3)
+#define CDNS_I2C_IXR_NACK		BIT(2)
+#define CDNS_I2C_IXR_DATA		BIT(1)
+#define CDNS_I2C_IXR_COMP		BIT(0)
+
+#define CDNS_I2C_IXR_ALL_INTR_MASK	(CDNS_I2C_IXR_ARB_LOST | \
+					 CDNS_I2C_IXR_RX_UNF | \
+					 CDNS_I2C_IXR_TX_OVF | \
+					 CDNS_I2C_IXR_RX_OVF | \
+					 CDNS_I2C_IXR_SLV_RDY | \
+					 CDNS_I2C_IXR_TO | \
+					 CDNS_I2C_IXR_NACK | \
+					 CDNS_I2C_IXR_DATA | \
+					 CDNS_I2C_IXR_COMP)
+
+#define CDNS_I2C_IXR_ERR_INTR_MASK	(CDNS_I2C_IXR_ARB_LOST | \
+					 CDNS_I2C_IXR_RX_UNF | \
+					 CDNS_I2C_IXR_TX_OVF | \
+					 CDNS_I2C_IXR_RX_OVF | \
+					 CDNS_I2C_IXR_NACK)
+
+#define CDNS_I2C_ENABLED_INTR_MASK	(CDNS_I2C_IXR_ARB_LOST | \
+					 CDNS_I2C_IXR_RX_UNF | \
+					 CDNS_I2C_IXR_TX_OVF | \
+					 CDNS_I2C_IXR_RX_OVF | \
+					 CDNS_I2C_IXR_NACK | \
+					 CDNS_I2C_IXR_DATA | \
+					 CDNS_I2C_IXR_COMP)
+
+#define CDNS_I2C_TIMEOUT		msecs_to_jiffies(1000)
+
+#define CDNS_I2C_FIFO_DEPTH		16
+/* FIFO depth at which the DATA interrupt occurs */
+#define CDNS_I2C_DATA_INTR_DEPTH	(CDNS_I2C_FIFO_DEPTH - 2)
+#define CDNS_I2C_MAX_TRANSFER_SIZE	255
+/* Transfer size in multiples of data interrupt depth */
+#define CDNS_I2C_TRANSFER_SIZE	(CDNS_I2C_MAX_TRANSFER_SIZE - 3)
+
+#define DRIVER_NAME		"cdns-i2c"
+
+#define CDNS_I2C_SPEED_MAX	400000
+#define CDNS_I2C_SPEED_DEFAULT	100000
+
+#define CDNS_I2C_DIVA_MAX	4
+#define CDNS_I2C_DIVB_MAX	64
+
+#define cdns_i2c_readreg(offset)       readl_relaxed(id->membase + offset)
+#define cdns_i2c_writereg(val, offset) writel_relaxed(val, id->membase + offset)
+
+/**
+ * struct cdns_i2c - I2C device private data structure
+ * @membase:		Base address of the I2C device
+ * @adap:		I2C adapter instance
+ * @p_msg:		Message pointer
+ * @err_status:		Error status in Interrupt Status Register
+ * @xfer_done:		Transfer complete status
+ * @p_send_buf:		Pointer to transmit buffer
+ * @p_recv_buf:		Pointer to receive buffer
+ * @suspended:		Flag holding the device's PM status
+ * @send_count:		Number of bytes still expected to send
+ * @recv_count:		Number of bytes still expected to receive
+ * @irq:		IRQ number
+ * @input_clk:		Input clock to I2C controller
+ * @i2c_clk:		Maximum I2C clock speed
+ * @bus_hold_flag:	Flag used in repeated start for clearing HOLD bit
+ * @clk:		Pointer to struct clk
+ * @clk_rate_change_nb:	Notifier block for clock rate changes
+ */
+struct cdns_i2c {
+	void __iomem *membase;
+	struct i2c_adapter adap;
+	struct i2c_msg *p_msg;
+	int err_status;
+	struct completion xfer_done;
+	unsigned char *p_send_buf;
+	unsigned char *p_recv_buf;
+	u8 suspended;
+	unsigned int send_count;
+	unsigned int recv_count;
+	int irq;
+	unsigned long input_clk;
+	unsigned int i2c_clk;
+	unsigned int bus_hold_flag;
+	struct clk *clk;
+	struct notifier_block clk_rate_change_nb;
+};
+
+#define to_cdns_i2c(_nb)	container_of(_nb, struct cdns_i2c, \
+					     clk_rate_change_nb)
+
+/**
+ * cdns_i2c_clear_bus_hold() - Clear bus hold bit
+ * @id:	Pointer to driver data struct
+ *
+ * Helper to clear the controller's bus hold bit.
+ */
+static void cdns_i2c_clear_bus_hold(struct cdns_i2c *id)
+{
+	u32 reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+	if (reg & CDNS_I2C_CR_HOLD)
+		cdns_i2c_writereg(reg & ~CDNS_I2C_CR_HOLD, CDNS_I2C_CR_OFFSET);
+}
+
+/**
+ * cdns_i2c_isr - Interrupt handler for the I2C device
+ * @irq:	irq number for the I2C device
+ * @ptr:	void pointer to cdns_i2c structure
+ *
+ * This function handles the data interrupt, transfer complete interrupt and
+ * the error interrupts of the I2C device.
+ *
+ * Return: IRQ_HANDLED always
+ */
+static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
+{
+	unsigned int isr_status, avail_bytes;
+	unsigned int bytes_to_recv, bytes_to_send;
+	struct cdns_i2c *id = ptr;
+	/* Signal completion only after everything is updated */
+	int done_flag = 0;
+	irqreturn_t status = IRQ_NONE;
+
+	isr_status = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
+
+	/* Handling nack and arbitration lost interrupt */
+	if (isr_status & (CDNS_I2C_IXR_NACK | CDNS_I2C_IXR_ARB_LOST)) {
+		done_flag = 1;
+		status = IRQ_HANDLED;
+	}
+
+	/* Handling Data interrupt */
+	if ((isr_status & CDNS_I2C_IXR_DATA) &&
+			(id->recv_count >= CDNS_I2C_DATA_INTR_DEPTH)) {
+		/* Always read data interrupt threshold bytes */
+		bytes_to_recv = CDNS_I2C_DATA_INTR_DEPTH;
+		id->recv_count -= CDNS_I2C_DATA_INTR_DEPTH;
+		avail_bytes = cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET);
+
+		/*
+		 * if the tranfer size register value is zero, then
+		 * check for the remaining bytes and update the
+		 * transfer size register.
+		 */
+		if (!avail_bytes) {
+			if (id->recv_count > CDNS_I2C_TRANSFER_SIZE)
+				cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE,
+						CDNS_I2C_XFER_SIZE_OFFSET);
+			else
+				cdns_i2c_writereg(id->recv_count,
+						CDNS_I2C_XFER_SIZE_OFFSET);
+		}
+
+		/* Process the data received */
+		while (bytes_to_recv--)
+			*(id->p_recv_buf)++ =
+				cdns_i2c_readreg(CDNS_I2C_DATA_OFFSET);
+
+		if (!id->bus_hold_flag &&
+				(id->recv_count <= CDNS_I2C_FIFO_DEPTH))
+			cdns_i2c_clear_bus_hold(id);
+
+		status = IRQ_HANDLED;
+	}
+
+	/* Handling Transfer Complete interrupt */
+	if (isr_status & CDNS_I2C_IXR_COMP) {
+		if (!id->p_recv_buf) {
+			/*
+			 * If the device is sending data If there is further
+			 * data to be sent. Calculate the available space
+			 * in FIFO and fill the FIFO with that many bytes.
+			 */
+			if (id->send_count) {
+				avail_bytes = CDNS_I2C_FIFO_DEPTH -
+				    cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET);
+				if (id->send_count > avail_bytes)
+					bytes_to_send = avail_bytes;
+				else
+					bytes_to_send = id->send_count;
+
+				while (bytes_to_send--) {
+					cdns_i2c_writereg(
+						(*(id->p_send_buf)++),
+						 CDNS_I2C_DATA_OFFSET);
+					id->send_count--;
+				}
+			} else {
+				/*
+				 * Signal the completion of transaction and
+				 * clear the hold bus bit if there are no
+				 * further messages to be processed.
+				 */
+				done_flag = 1;
+			}
+			if (!id->send_count && !id->bus_hold_flag)
+				cdns_i2c_clear_bus_hold(id);
+		} else {
+			if (!id->bus_hold_flag)
+				cdns_i2c_clear_bus_hold(id);
+			/*
+			 * If the device is receiving data, then signal
+			 * the completion of transaction and read the data
+			 * present in the FIFO. Signal the completion of
+			 * transaction.
+			 */
+			while (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) &
+					CDNS_I2C_SR_RXDV) {
+				*(id->p_recv_buf)++ =
+					cdns_i2c_readreg(CDNS_I2C_DATA_OFFSET);
+				id->recv_count--;
+			}
+			done_flag = 1;
+		}
+
+		status = IRQ_HANDLED;
+	}
+
+	/* Update the status for errors */
+	id->err_status = isr_status & CDNS_I2C_IXR_ERR_INTR_MASK;
+	if (id->err_status)
+		status = IRQ_HANDLED;
+
+	cdns_i2c_writereg(isr_status, CDNS_I2C_ISR_OFFSET);
+
+	if (done_flag)
+		complete(&id->xfer_done);
+
+	return status;
+}
+
+/**
+ * cdns_i2c_mrecv - Prepare and start a master receive operation
+ * @id:		pointer to the i2c device structure
+ */
+static void cdns_i2c_mrecv(struct cdns_i2c *id)
+{
+	unsigned int ctrl_reg;
+	unsigned int isr_status;
+
+	id->p_recv_buf = id->p_msg->buf;
+	id->recv_count = id->p_msg->len;
+
+	/* Put the controller in master receive mode and clear the FIFO */
+	ctrl_reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+	ctrl_reg |= CDNS_I2C_CR_RW | CDNS_I2C_CR_CLR_FIFO;
+
+	if (id->p_msg->flags & I2C_M_RECV_LEN)
+		id->recv_count = I2C_SMBUS_BLOCK_MAX + 1;
+
+	/*
+	 * Check for the message size against FIFO depth and set the
+	 * 'hold bus' bit if it is greater than FIFO depth.
+	 */
+	if (id->recv_count > CDNS_I2C_FIFO_DEPTH)
+		ctrl_reg |= CDNS_I2C_CR_HOLD;
+
+	cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
+
+	/* Clear the interrupts in interrupt status register */
+	isr_status = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
+	cdns_i2c_writereg(isr_status, CDNS_I2C_ISR_OFFSET);
+
+	/*
+	 * The no. of bytes to receive is checked against the limit of
+	 * max transfer size. Set transfer size register with no of bytes
+	 * receive if it is less than transfer size and transfer size if
+	 * it is more. Enable the interrupts.
+	 */
+	if (id->recv_count > CDNS_I2C_TRANSFER_SIZE)
+		cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE,
+				  CDNS_I2C_XFER_SIZE_OFFSET);
+	else
+		cdns_i2c_writereg(id->recv_count, CDNS_I2C_XFER_SIZE_OFFSET);
+	/* Clear the bus hold flag if bytes to receive is less than FIFO size */
+	if (!id->bus_hold_flag &&
+		((id->p_msg->flags & I2C_M_RECV_LEN) != I2C_M_RECV_LEN) &&
+		(id->recv_count <= CDNS_I2C_FIFO_DEPTH))
+			cdns_i2c_clear_bus_hold(id);
+	/* Set the slave address in address register - triggers operation */
+	cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK,
+						CDNS_I2C_ADDR_OFFSET);
+	cdns_i2c_writereg(CDNS_I2C_ENABLED_INTR_MASK, CDNS_I2C_IER_OFFSET);
+}
+
+/**
+ * cdns_i2c_msend - Prepare and start a master send operation
+ * @id:		pointer to the i2c device
+ */
+static void cdns_i2c_msend(struct cdns_i2c *id)
+{
+	unsigned int avail_bytes;
+	unsigned int bytes_to_send;
+	unsigned int ctrl_reg;
+	unsigned int isr_status;
+
+	id->p_recv_buf = NULL;
+	id->p_send_buf = id->p_msg->buf;
+	id->send_count = id->p_msg->len;
+
+	/* Set the controller in Master transmit mode and clear the FIFO. */
+	ctrl_reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+	ctrl_reg &= ~CDNS_I2C_CR_RW;
+	ctrl_reg |= CDNS_I2C_CR_CLR_FIFO;
+
+	/*
+	 * Check for the message size against FIFO depth and set the
+	 * 'hold bus' bit if it is greater than FIFO depth.
+	 */
+	if (id->send_count > CDNS_I2C_FIFO_DEPTH)
+		ctrl_reg |= CDNS_I2C_CR_HOLD;
+	cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
+
+	/* Clear the interrupts in interrupt status register. */
+	isr_status = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
+	cdns_i2c_writereg(isr_status, CDNS_I2C_ISR_OFFSET);
+
+	/*
+	 * Calculate the space available in FIFO. Check the message length
+	 * against the space available, and fill the FIFO accordingly.
+	 * Enable the interrupts.
+	 */
+	avail_bytes = CDNS_I2C_FIFO_DEPTH -
+				cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET);
+
+	if (id->send_count > avail_bytes)
+		bytes_to_send = avail_bytes;
+	else
+		bytes_to_send = id->send_count;
+
+	while (bytes_to_send--) {
+		cdns_i2c_writereg((*(id->p_send_buf)++), CDNS_I2C_DATA_OFFSET);
+		id->send_count--;
+	}
+
+	/*
+	 * Clear the bus hold flag if there is no more data
+	 * and if it is the last message.
+	 */
+	if (!id->bus_hold_flag && !id->send_count)
+		cdns_i2c_clear_bus_hold(id);
+	/* Set the slave address in address register - triggers operation. */
+	cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK,
+						CDNS_I2C_ADDR_OFFSET);
+
+	cdns_i2c_writereg(CDNS_I2C_ENABLED_INTR_MASK, CDNS_I2C_IER_OFFSET);
+}
+
+/**
+ * cdns_i2c_master_reset - Reset the interface
+ * @adap:	pointer to the i2c adapter driver instance
+ *
+ * This function cleanup the fifos, clear the hold bit and status
+ * and disable the interrupts.
+ */
+static void cdns_i2c_master_reset(struct i2c_adapter *adap)
+{
+	struct cdns_i2c *id = adap->algo_data;
+	u32 regval;
+
+	/* Disable the interrupts */
+	cdns_i2c_writereg(CDNS_I2C_IXR_ALL_INTR_MASK, CDNS_I2C_IDR_OFFSET);
+	/* Clear the hold bit and fifos */
+	regval = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+	regval &= ~CDNS_I2C_CR_HOLD;
+	regval |= CDNS_I2C_CR_CLR_FIFO;
+	cdns_i2c_writereg(regval, CDNS_I2C_CR_OFFSET);
+	/* Update the transfercount register to zero */
+	cdns_i2c_writereg(0, CDNS_I2C_XFER_SIZE_OFFSET);
+	/* Clear the interupt status register */
+	regval = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
+	cdns_i2c_writereg(regval, CDNS_I2C_ISR_OFFSET);
+	/* Clear the status register */
+	regval = cdns_i2c_readreg(CDNS_I2C_SR_OFFSET);
+	cdns_i2c_writereg(regval, CDNS_I2C_SR_OFFSET);
+}
+
+static int cdns_i2c_process_msg(struct cdns_i2c *id, struct i2c_msg *msg,
+		struct i2c_adapter *adap)
+{
+	int ret;
+	u32 reg;
+
+	id->p_msg = msg;
+	id->err_status = 0;
+	reinit_completion(&id->xfer_done);
+
+	/* Check for the TEN Bit mode on each msg */
+	reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+	if (msg->flags & I2C_M_TEN) {
+		if (reg & CDNS_I2C_CR_NEA)
+			cdns_i2c_writereg(reg & ~CDNS_I2C_CR_NEA,
+					CDNS_I2C_CR_OFFSET);
+	} else {
+		if (!(reg & CDNS_I2C_CR_NEA))
+			cdns_i2c_writereg(reg | CDNS_I2C_CR_NEA,
+					CDNS_I2C_CR_OFFSET);
+	}
+
+	/* Check for the R/W flag on each msg */
+	if (msg->flags & I2C_M_RD)
+		cdns_i2c_mrecv(id);
+	else
+		cdns_i2c_msend(id);
+
+	/* Wait for the signal of completion */
+	ret = wait_for_completion_timeout(&id->xfer_done, adap->timeout);
+	if (!ret) {
+		cdns_i2c_master_reset(adap);
+		dev_err(id->adap.dev.parent,
+				"timeout waiting on completion\n");
+		return -ETIMEDOUT;
+	}
+
+	cdns_i2c_writereg(CDNS_I2C_IXR_ALL_INTR_MASK,
+			  CDNS_I2C_IDR_OFFSET);
+
+	/* If it is bus arbitration error, try again */
+	if (id->err_status & CDNS_I2C_IXR_ARB_LOST)
+		return -EAGAIN;
+
+	return 0;
+}
+
+/**
+ * cdns_i2c_master_xfer - The main i2c transfer function
+ * @adap:	pointer to the i2c adapter driver instance
+ * @msgs:	pointer to the i2c message structure
+ * @num:	the number of messages to transfer
+ *
+ * Initiates the send/recv activity based on the transfer message received.
+ *
+ * Return: number of msgs processed on success, negative error otherwise
+ */
+static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+				int num)
+{
+	int ret, count;
+	u32 reg;
+	struct cdns_i2c *id = adap->algo_data;
+
+	/* Check if the bus is free */
+	if (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) & CDNS_I2C_SR_BA)
+		return -EAGAIN;
+
+	/*
+	 * Set the flag to one when multiple messages are to be
+	 * processed with a repeated start.
+	 */
+	if (num > 1) {
+		id->bus_hold_flag = 1;
+		reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+		reg |= CDNS_I2C_CR_HOLD;
+		cdns_i2c_writereg(reg, CDNS_I2C_CR_OFFSET);
+	} else {
+		id->bus_hold_flag = 0;
+	}
+
+	/* Process the msg one by one */
+	for (count = 0; count < num; count++, msgs++) {
+		if (count == (num - 1))
+			id->bus_hold_flag = 0;
+
+		ret = cdns_i2c_process_msg(id, msgs, adap);
+		if (ret)
+			return ret;
+
+		/* Report the other error interrupts to application */
+		if (id->err_status) {
+			cdns_i2c_master_reset(adap);
+
+			if (id->err_status & CDNS_I2C_IXR_NACK)
+				return -ENXIO;
+
+			return -EIO;
+		}
+	}
+
+	return num;
+}
+
+/**
+ * cdns_i2c_func - Returns the supported features of the I2C driver
+ * @adap:	pointer to the i2c adapter structure
+ *
+ * Return: 32 bit value, each bit corresponding to a feature
+ */
+static u32 cdns_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR |
+		(I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
+		I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static const struct i2c_algorithm cdns_i2c_algo = {
+	.master_xfer	= cdns_i2c_master_xfer,
+	.functionality	= cdns_i2c_func,
+};
+
+/**
+ * cdns_i2c_calc_divs - Calculate clock dividers
+ * @f:		I2C clock frequency
+ * @input_clk:	Input clock frequency
+ * @a:		First divider (return value)
+ * @b:		Second divider (return value)
+ *
+ * f is used as input and output variable. As input it is used as target I2C
+ * frequency. On function exit f holds the actually resulting I2C frequency.
+ *
+ * Return: 0 on success, negative errno otherwise.
+ */
+static int cdns_i2c_calc_divs(unsigned long *f, unsigned long input_clk,
+		unsigned int *a, unsigned int *b)
+{
+	unsigned long fscl = *f, best_fscl = *f, actual_fscl, temp;
+	unsigned int div_a, div_b, calc_div_a = 0, calc_div_b = 0;
+	unsigned int last_error, current_error;
+
+	/* calculate (divisor_a+1) x (divisor_b+1) */
+	temp = input_clk / (22 * fscl);
+
+	/*
+	 * If the calculated value is negative or 0, the fscl input is out of
+	 * range. Return error.
+	 */
+	if (!temp || (temp > (CDNS_I2C_DIVA_MAX * CDNS_I2C_DIVB_MAX)))
+		return -EINVAL;
+
+	last_error = -1;
+	for (div_a = 0; div_a < CDNS_I2C_DIVA_MAX; div_a++) {
+		div_b = DIV_ROUND_UP(input_clk, 22 * fscl * (div_a + 1));
+
+		if ((div_b < 1) || (div_b > CDNS_I2C_DIVB_MAX))
+			continue;
+		div_b--;
+
+		actual_fscl = input_clk / (22 * (div_a + 1) * (div_b + 1));
+
+		if (actual_fscl > fscl)
+			continue;
+
+		current_error = ((actual_fscl > fscl) ? (actual_fscl - fscl) :
+							(fscl - actual_fscl));
+
+		if (last_error > current_error) {
+			calc_div_a = div_a;
+			calc_div_b = div_b;
+			best_fscl = actual_fscl;
+			last_error = current_error;
+		}
+	}
+
+	*a = calc_div_a;
+	*b = calc_div_b;
+	*f = best_fscl;
+
+	return 0;
+}
+
+/**
+ * cdns_i2c_setclk - This function sets the serial clock rate for the I2C device
+ * @clk_in:	I2C clock input frequency in Hz
+ * @id:		Pointer to the I2C device structure
+ *
+ * The device must be idle rather than busy transferring data before setting
+ * these device options.
+ * The data rate is set by values in the control register.
+ * The formula for determining the correct register values is
+ *	Fscl = Fpclk/(22 x (divisor_a+1) x (divisor_b+1))
+ * See the hardware data sheet for a full explanation of setting the serial
+ * clock rate. The clock can not be faster than the input clock divide by 22.
+ * The two most common clock rates are 100KHz and 400KHz.
+ *
+ * Return: 0 on success, negative error otherwise
+ */
+static int cdns_i2c_setclk(unsigned long clk_in, struct cdns_i2c *id)
+{
+	unsigned int div_a, div_b;
+	unsigned int ctrl_reg;
+	int ret = 0;
+	unsigned long fscl = id->i2c_clk;
+
+	ret = cdns_i2c_calc_divs(&fscl, clk_in, &div_a, &div_b);
+	if (ret)
+		return ret;
+
+	ctrl_reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+	ctrl_reg &= ~(CDNS_I2C_CR_DIVA_MASK | CDNS_I2C_CR_DIVB_MASK);
+	ctrl_reg |= ((div_a << CDNS_I2C_CR_DIVA_SHIFT) |
+			(div_b << CDNS_I2C_CR_DIVB_SHIFT));
+	cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
+
+	return 0;
+}
+
+/**
+ * cdns_i2c_clk_notifier_cb - Clock rate change callback
+ * @nb:		Pointer to notifier block
+ * @event:	Notification reason
+ * @data:	Pointer to notification data object
+ *
+ * This function is called when the cdns_i2c input clock frequency changes.
+ * The callback checks whether a valid bus frequency can be generated after the
+ * change. If so, the change is acknowledged, otherwise the change is aborted.
+ * New dividers are written to the HW in the pre- or post change notification
+ * depending on the scaling direction.
+ *
+ * Return:	NOTIFY_STOP if the rate change should be aborted, NOTIFY_OK
+ *		to acknowedge the change, NOTIFY_DONE if the notification is
+ *		considered irrelevant.
+ */
+static int cdns_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long
+		event, void *data)
+{
+	struct clk_notifier_data *ndata = data;
+	struct cdns_i2c *id = to_cdns_i2c(nb);
+
+	if (id->suspended)
+		return NOTIFY_OK;
+
+	switch (event) {
+	case PRE_RATE_CHANGE:
+	{
+		unsigned long input_clk = ndata->new_rate;
+		unsigned long fscl = id->i2c_clk;
+		unsigned int div_a, div_b;
+		int ret;
+
+		ret = cdns_i2c_calc_divs(&fscl, input_clk, &div_a, &div_b);
+		if (ret) {
+			dev_warn(id->adap.dev.parent,
+					"clock rate change rejected\n");
+			return NOTIFY_STOP;
+		}
+
+		/* scale up */
+		if (ndata->new_rate > ndata->old_rate)
+			cdns_i2c_setclk(ndata->new_rate, id);
+
+		return NOTIFY_OK;
+	}
+	case POST_RATE_CHANGE:
+		id->input_clk = ndata->new_rate;
+		/* scale down */
+		if (ndata->new_rate < ndata->old_rate)
+			cdns_i2c_setclk(ndata->new_rate, id);
+		return NOTIFY_OK;
+	case ABORT_RATE_CHANGE:
+		/* scale up */
+		if (ndata->new_rate > ndata->old_rate)
+			cdns_i2c_setclk(ndata->old_rate, id);
+		return NOTIFY_OK;
+	default:
+		return NOTIFY_DONE;
+	}
+}
+
+/**
+ * cdns_i2c_suspend - Suspend method for the driver
+ * @_dev:	Address of the platform_device structure
+ *
+ * Put the driver into low power mode.
+ *
+ * Return: 0 always
+ */
+static int __maybe_unused cdns_i2c_suspend(struct device *_dev)
+{
+	struct platform_device *pdev = container_of(_dev,
+			struct platform_device, dev);
+	struct cdns_i2c *xi2c = platform_get_drvdata(pdev);
+
+	clk_disable(xi2c->clk);
+	xi2c->suspended = 1;
+
+	return 0;
+}
+
+/**
+ * cdns_i2c_resume - Resume from suspend
+ * @_dev:	Address of the platform_device structure
+ *
+ * Resume operation after suspend.
+ *
+ * Return: 0 on success and error value on error
+ */
+static int __maybe_unused cdns_i2c_resume(struct device *_dev)
+{
+	struct platform_device *pdev = container_of(_dev,
+			struct platform_device, dev);
+	struct cdns_i2c *xi2c = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = clk_enable(xi2c->clk);
+	if (ret) {
+		dev_err(_dev, "Cannot enable clock.\n");
+		return ret;
+	}
+
+	xi2c->suspended = 0;
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(cdns_i2c_dev_pm_ops, cdns_i2c_suspend,
+			 cdns_i2c_resume);
+
+/**
+ * cdns_i2c_probe - Platform registration call
+ * @pdev:	Handle to the platform device structure
+ *
+ * This function does all the memory allocation and registration for the i2c
+ * device. User can modify the address mode to 10 bit address mode using the
+ * ioctl call with option I2C_TENBIT.
+ *
+ * Return: 0 on success, negative error otherwise
+ */
+static int cdns_i2c_probe(struct platform_device *pdev)
+{
+	struct resource *r_mem;
+	struct cdns_i2c *id;
+	int ret;
+
+	id = devm_kzalloc(&pdev->dev, sizeof(*id), GFP_KERNEL);
+	if (!id)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, id);
+
+	r_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	id->membase = devm_ioremap_resource(&pdev->dev, r_mem);
+	if (IS_ERR(id->membase))
+		return PTR_ERR(id->membase);
+
+	id->irq = platform_get_irq(pdev, 0);
+
+	id->adap.dev.of_node = pdev->dev.of_node;
+	id->adap.algo = &cdns_i2c_algo;
+	id->adap.timeout = CDNS_I2C_TIMEOUT;
+	id->adap.retries = 3;		/* Default retry value. */
+	id->adap.algo_data = id;
+	id->adap.dev.parent = &pdev->dev;
+	init_completion(&id->xfer_done);
+	snprintf(id->adap.name, sizeof(id->adap.name),
+		 "Cadence I2C at %08lx", (unsigned long)r_mem->start);
+
+	id->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(id->clk)) {
+		dev_err(&pdev->dev, "input clock not found.\n");
+		return PTR_ERR(id->clk);
+	}
+	ret = clk_prepare_enable(id->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable clock.\n");
+		return ret;
+	}
+	id->clk_rate_change_nb.notifier_call = cdns_i2c_clk_notifier_cb;
+	if (clk_notifier_register(id->clk, &id->clk_rate_change_nb))
+		dev_warn(&pdev->dev, "Unable to register clock notifier.\n");
+	id->input_clk = clk_get_rate(id->clk);
+
+	ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+			&id->i2c_clk);
+	if (ret || (id->i2c_clk > CDNS_I2C_SPEED_MAX))
+		id->i2c_clk = CDNS_I2C_SPEED_DEFAULT;
+
+	cdns_i2c_writereg(CDNS_I2C_CR_ACK_EN | CDNS_I2C_CR_NEA | CDNS_I2C_CR_MS,
+			  CDNS_I2C_CR_OFFSET);
+
+	ret = cdns_i2c_setclk(id->input_clk, id);
+	if (ret) {
+		dev_err(&pdev->dev, "invalid SCL clock: %u Hz\n", id->i2c_clk);
+		ret = -EINVAL;
+		goto err_clk_dis;
+	}
+
+	ret = devm_request_irq(&pdev->dev, id->irq, cdns_i2c_isr, 0,
+				 DRIVER_NAME, id);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot get irq %d\n", id->irq);
+		goto err_clk_dis;
+	}
+
+	ret = i2c_add_adapter(&id->adap);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "reg adap failed: %d\n", ret);
+		goto err_clk_dis;
+	}
+
+	dev_info(&pdev->dev, "%u kHz mmio %08lx irq %d\n",
+		 id->i2c_clk / 1000, (unsigned long)r_mem->start, id->irq);
+
+	return 0;
+
+err_clk_dis:
+	clk_disable_unprepare(id->clk);
+	return ret;
+}
+
+/**
+ * cdns_i2c_remove - Unregister the device after releasing the resources
+ * @pdev:	Handle to the platform device structure
+ *
+ * This function frees all the resources allocated to the device.
+ *
+ * Return: 0 always
+ */
+static int cdns_i2c_remove(struct platform_device *pdev)
+{
+	struct cdns_i2c *id = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&id->adap);
+	clk_notifier_unregister(id->clk, &id->clk_rate_change_nb);
+	clk_disable_unprepare(id->clk);
+
+	return 0;
+}
+
+static const struct of_device_id cdns_i2c_of_match[] = {
+	{ .compatible = "cdns,i2c-r1p10", },
+	{ /* end of table */ }
+};
+MODULE_DEVICE_TABLE(of, cdns_i2c_of_match);
+
+static struct platform_driver cdns_i2c_drv = {
+	.driver = {
+		.name  = DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = cdns_i2c_of_match,
+		.pm = &cdns_i2c_dev_pm_ops,
+	},
+	.probe  = cdns_i2c_probe,
+	.remove = cdns_i2c_remove,
+};
+
+module_platform_driver(cdns_i2c_drv);
+
+MODULE_AUTHOR("Xilinx Inc.");
+MODULE_DESCRIPTION("Cadence I2C bus driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index af0b5830303d..389bc68c55ad 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -712,7 +712,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 	adap = &dev->adapter;
 	i2c_set_adapdata(adap, dev);
 	adap->owner = THIS_MODULE;
-	adap->class = I2C_CLASS_HWMON;
+	adap->class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED;
 	strlcpy(adap->name, "DaVinci I2C adapter", sizeof(adap->name));
 	adap->algo = &i2c_davinci_algo;
 	adap->dev.parent = &pdev->dev;
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 14c4b30d4ccc..22e92c3d3d07 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -218,7 +218,7 @@ i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
 		 *
 		 * If your hardware is free from tHD;STA issue, try this one.
 		 */
-		return (ic_clk * tSYMBOL + 5000) / 10000 - 8 + offset;
+		return (ic_clk * tSYMBOL + 500000) / 1000000 - 8 + offset;
 	else
 		/*
 		 * Conditional expression:
@@ -234,7 +234,8 @@ i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
 		 * The reason why we need to take into account "tf" here,
 		 * is the same as described in i2c_dw_scl_lcnt().
 		 */
-		return (ic_clk * (tSYMBOL + tf) + 5000) / 10000 - 3 + offset;
+		return (ic_clk * (tSYMBOL + tf) + 500000) / 1000000
+			- 3 + offset;
 }
 
 static u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
@@ -250,7 +251,7 @@ static u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
 	 * account the fall time of SCL signal (tf).  Default tf value
 	 * should be 0.3 us, for safety.
 	 */
-	return ((ic_clk * (tLOW + tf) + 5000) / 10000) - 1 + offset;
+	return ((ic_clk * (tLOW + tf) + 500000) / 1000000) - 1 + offset;
 }
 
 static void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable)
@@ -287,6 +288,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 	u32 input_clock_khz;
 	u32 hcnt, lcnt;
 	u32 reg;
+	u32 sda_falling_time, scl_falling_time;
 
 	input_clock_khz = dev->get_clk_rate_khz(dev);
 
@@ -308,15 +310,18 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 
 	/* set standard and fast speed deviders for high/low periods */
 
+	sda_falling_time = dev->sda_falling_time ?: 300; /* ns */
+	scl_falling_time = dev->scl_falling_time ?: 300; /* ns */
+
 	/* Standard-mode */
 	hcnt = i2c_dw_scl_hcnt(input_clock_khz,
-				40,	/* tHD;STA = tHIGH = 4.0 us */
-				3,	/* tf = 0.3 us */
+				4000,	/* tHD;STA = tHIGH = 4.0 us */
+				sda_falling_time,
 				0,	/* 0: DW default, 1: Ideal */
 				0);	/* No offset */
 	lcnt = i2c_dw_scl_lcnt(input_clock_khz,
-				47,	/* tLOW = 4.7 us */
-				3,	/* tf = 0.3 us */
+				4700,	/* tLOW = 4.7 us */
+				scl_falling_time,
 				0);	/* No offset */
 
 	/* Allow platforms to specify the ideal HCNT and LCNT values */
@@ -330,13 +335,13 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 
 	/* Fast-mode */
 	hcnt = i2c_dw_scl_hcnt(input_clock_khz,
-				6,	/* tHD;STA = tHIGH = 0.6 us */
-				3,	/* tf = 0.3 us */
+				600,	/* tHD;STA = tHIGH = 0.6 us */
+				sda_falling_time,
 				0,	/* 0: DW default, 1: Ideal */
 				0);	/* No offset */
 	lcnt = i2c_dw_scl_lcnt(input_clock_khz,
-				13,	/* tLOW = 1.3 us */
-				3,	/* tf = 0.3 us */
+				1300,	/* tLOW = 1.3 us */
+				scl_falling_time,
 				0);	/* No offset */
 
 	if (dev->fs_hcnt && dev->fs_lcnt) {
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index e8a756537ed0..d66b6cbc9edc 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -99,6 +99,8 @@ struct dw_i2c_dev {
 	unsigned int		rx_fifo_depth;
 	int			rx_outstanding;
 	u32			sda_hold_time;
+	u32			sda_falling_time;
+	u32			scl_falling_time;
 	u16			ss_hcnt;
 	u16			ss_lcnt;
 	u16			fs_hcnt;
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index f6ed06c966ee..85056c22d21e 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -54,6 +54,16 @@ enum dw_pci_ctl_id_t {
 	medfield_3,
 	medfield_4,
 	medfield_5,
+
+	baytrail,
+};
+
+struct dw_scl_sda_cfg {
+	u32 ss_hcnt;
+	u32 fs_hcnt;
+	u32 ss_lcnt;
+	u32 fs_lcnt;
+	u32 sda_hold;
 };
 
 struct dw_pci_controller {
@@ -62,12 +72,29 @@ struct dw_pci_controller {
 	u32 tx_fifo_depth;
 	u32 rx_fifo_depth;
 	u32 clk_khz;
+	u32 functionality;
+	struct dw_scl_sda_cfg *scl_sda_cfg;
 };
 
 #define INTEL_MID_STD_CFG  (DW_IC_CON_MASTER |			\
 				DW_IC_CON_SLAVE_DISABLE |	\
 				DW_IC_CON_RESTART_EN)
 
+#define DW_DEFAULT_FUNCTIONALITY (I2C_FUNC_I2C |			\
+					I2C_FUNC_SMBUS_BYTE |		\
+					I2C_FUNC_SMBUS_BYTE_DATA |	\
+					I2C_FUNC_SMBUS_WORD_DATA |	\
+					I2C_FUNC_SMBUS_I2C_BLOCK)
+
+/* BayTrail HCNT/LCNT/SDA hold time */
+static struct dw_scl_sda_cfg byt_config = {
+	.ss_hcnt = 0x200,
+	.fs_hcnt = 0x55,
+	.ss_lcnt = 0x200,
+	.fs_lcnt = 0x99,
+	.sda_hold = 0x6,
+};
+
 static struct  dw_pci_controller  dw_pci_controllers[] = {
 	[moorestown_0] = {
 		.bus_num     = 0,
@@ -132,75 +159,40 @@ static struct  dw_pci_controller  dw_pci_controllers[] = {
 		.rx_fifo_depth = 32,
 		.clk_khz      = 25000,
 	},
+	[baytrail] = {
+		.bus_num = -1,
+		.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+		.tx_fifo_depth = 32,
+		.rx_fifo_depth = 32,
+		.clk_khz = 100000,
+		.functionality = I2C_FUNC_10BIT_ADDR,
+		.scl_sda_cfg = &byt_config,
+	},
 };
 static struct i2c_algorithm i2c_dw_algo = {
 	.master_xfer	= i2c_dw_xfer,
 	.functionality	= i2c_dw_func,
 };
 
+#ifdef CONFIG_PM
 static int i2c_dw_pci_suspend(struct device *dev)
 {
 	struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
-	struct dw_i2c_dev *i2c = pci_get_drvdata(pdev);
-	int err;
-
-
-	i2c_dw_disable(i2c);
-
-	err = pci_save_state(pdev);
-	if (err) {
-		dev_err(&pdev->dev, "pci_save_state failed\n");
-		return err;
-	}
-
-	err = pci_set_power_state(pdev, PCI_D3hot);
-	if (err) {
-		dev_err(&pdev->dev, "pci_set_power_state failed\n");
-		return err;
-	}
 
+	i2c_dw_disable(pci_get_drvdata(pdev));
 	return 0;
 }
 
 static int i2c_dw_pci_resume(struct device *dev)
 {
 	struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
-	struct dw_i2c_dev *i2c = pci_get_drvdata(pdev);
-	int err;
-	u32 enabled;
-
-	enabled = i2c_dw_is_enabled(i2c);
-	if (enabled)
-		return 0;
-
-	err = pci_set_power_state(pdev, PCI_D0);
-	if (err) {
-		dev_err(&pdev->dev, "pci_set_power_state() failed\n");
-		return err;
-	}
-
-	pci_restore_state(pdev);
-
-	i2c_dw_init(i2c);
-	return 0;
-}
 
-static int i2c_dw_pci_runtime_idle(struct device *dev)
-{
-	int err = pm_schedule_suspend(dev, 500);
-	dev_dbg(dev, "runtime_idle called\n");
-
-	if (err != 0)
-		return 0;
-	return -EBUSY;
+	return i2c_dw_init(pci_get_drvdata(pdev));
 }
+#endif
 
-static const struct dev_pm_ops i2c_dw_pm_ops = {
-	.resume         = i2c_dw_pci_resume,
-	.suspend        = i2c_dw_pci_suspend,
-	SET_RUNTIME_PM_OPS(i2c_dw_pci_suspend, i2c_dw_pci_resume,
-			   i2c_dw_pci_runtime_idle)
-};
+static UNIVERSAL_DEV_PM_OPS(i2c_dw_pm_ops, i2c_dw_pci_suspend,
+			    i2c_dw_pci_resume, NULL);
 
 static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
 {
@@ -214,6 +206,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 	struct i2c_adapter *adap;
 	int r;
 	struct  dw_pci_controller *controller;
+	struct dw_scl_sda_cfg *cfg;
 
 	if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers)) {
 		dev_err(&pdev->dev, "%s: invalid driver data %ld\n", __func__,
@@ -247,13 +240,18 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 	dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
 	dev->base = pcim_iomap_table(pdev)[0];
 	dev->dev = &pdev->dev;
-	dev->functionality =
-		I2C_FUNC_I2C |
-		I2C_FUNC_SMBUS_BYTE |
-		I2C_FUNC_SMBUS_BYTE_DATA |
-		I2C_FUNC_SMBUS_WORD_DATA |
-		I2C_FUNC_SMBUS_I2C_BLOCK;
+	dev->functionality = controller->functionality |
+				DW_DEFAULT_FUNCTIONALITY;
+
 	dev->master_cfg =  controller->bus_cfg;
+	if (controller->scl_sda_cfg) {
+		cfg = controller->scl_sda_cfg;
+		dev->ss_hcnt = cfg->ss_hcnt;
+		dev->fs_hcnt = cfg->fs_hcnt;
+		dev->ss_lcnt = cfg->ss_lcnt;
+		dev->fs_lcnt = cfg->fs_lcnt;
+		dev->sda_hold_time = cfg->sda_hold;
+	}
 
 	pci_set_drvdata(pdev, dev);
 
@@ -270,8 +268,8 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 	adap->algo = &i2c_dw_algo;
 	adap->dev.parent = &pdev->dev;
 	adap->nr = controller->bus_num;
-	snprintf(adap->name, sizeof(adap->name), "i2c-designware-pci-%d",
-		adap->nr);
+
+	snprintf(adap->name, sizeof(adap->name), "i2c-designware-pci");
 
 	r = devm_request_irq(&pdev->dev, pdev->irq, i2c_dw_isr, IRQF_SHARED,
 			adap->name, dev);
@@ -290,6 +288,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 
 	pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
 	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_put_autosuspend(&pdev->dev);
 	pm_runtime_allow(&pdev->dev);
 
 	return 0;
@@ -309,7 +308,7 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev)
 /* work with hotplug and coldplug */
 MODULE_ALIAS("i2c_designware-pci");
 
-static DEFINE_PCI_DEVICE_TABLE(i2_designware_pci_ids) = {
+static const struct pci_device_id i2_designware_pci_ids[] = {
 	/* Moorestown */
 	{ PCI_VDEVICE(INTEL, 0x0802), moorestown_0 },
 	{ PCI_VDEVICE(INTEL, 0x0803), moorestown_1 },
@@ -321,6 +320,14 @@ static DEFINE_PCI_DEVICE_TABLE(i2_designware_pci_ids) = {
 	{ PCI_VDEVICE(INTEL, 0x082C), medfield_0 },
 	{ PCI_VDEVICE(INTEL, 0x082D), medfield_1 },
 	{ PCI_VDEVICE(INTEL, 0x082E), medfield_2 },
+	/* Baytrail */
+	{ PCI_VDEVICE(INTEL, 0x0F41), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F42), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F43), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F44), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F45), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F46), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F47), baytrail },
 	{ 0,}
 };
 MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index d0bdac0498ce..9c7802614342 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -159,6 +159,13 @@ static int dw_i2c_probe(struct platform_device *pdev)
 					"i2c-sda-hold-time-ns", &ht);
 		dev->sda_hold_time = div_u64((u64)ic_clk * ht + 500000,
 					     1000000);
+
+		of_property_read_u32(pdev->dev.of_node,
+				     "i2c-sda-falling-time-ns",
+				     &dev->sda_falling_time);
+		of_property_read_u32(pdev->dev.of_node,
+				     "i2c-scl-falling-time-ns",
+				     &dev->scl_falling_time);
 	}
 
 	dev->functionality =
@@ -195,7 +202,7 @@ static int dw_i2c_probe(struct platform_device *pdev)
 	adap = &dev->adapter;
 	i2c_set_adapdata(adap, dev);
 	adap->owner = THIS_MODULE;
-	adap->class = I2C_CLASS_HWMON;
+	adap->class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED;
 	strlcpy(adap->name, "Synopsys DesignWare I2C adapter",
 			sizeof(adap->name));
 	adap->algo = &i2c_dw_algo;
diff --git a/drivers/i2c/busses/i2c-efm32.c b/drivers/i2c/busses/i2c-efm32.c
new file mode 100644
index 000000000000..777ed409a24a
--- /dev/null
+++ b/drivers/i2c/busses/i2c-efm32.c
@@ -0,0 +1,481 @@
+/*
+ * Copyright (C) 2014 Uwe Kleine-Koenig for Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#define DRIVER_NAME "efm32-i2c"
+
+#define MASK_VAL(mask, val)		((val << __ffs(mask)) & mask)
+
+#define REG_CTRL		0x00
+#define REG_CTRL_EN			0x00001
+#define REG_CTRL_SLAVE			0x00002
+#define REG_CTRL_AUTOACK		0x00004
+#define REG_CTRL_AUTOSE			0x00008
+#define REG_CTRL_AUTOSN			0x00010
+#define REG_CTRL_ARBDIS			0x00020
+#define REG_CTRL_GCAMEN			0x00040
+#define REG_CTRL_CLHR__MASK		0x00300
+#define REG_CTRL_BITO__MASK		0x03000
+#define REG_CTRL_BITO_OFF		0x00000
+#define REG_CTRL_BITO_40PCC		0x01000
+#define REG_CTRL_BITO_80PCC		0x02000
+#define REG_CTRL_BITO_160PCC		0x03000
+#define REG_CTRL_GIBITO			0x08000
+#define REG_CTRL_CLTO__MASK		0x70000
+#define REG_CTRL_CLTO_OFF		0x00000
+
+#define REG_CMD			0x04
+#define REG_CMD_START			0x00001
+#define REG_CMD_STOP			0x00002
+#define REG_CMD_ACK			0x00004
+#define REG_CMD_NACK			0x00008
+#define REG_CMD_CONT			0x00010
+#define REG_CMD_ABORT			0x00020
+#define REG_CMD_CLEARTX			0x00040
+#define REG_CMD_CLEARPC			0x00080
+
+#define REG_STATE		0x08
+#define REG_STATE_BUSY			0x00001
+#define REG_STATE_MASTER		0x00002
+#define REG_STATE_TRANSMITTER		0x00004
+#define REG_STATE_NACKED		0x00008
+#define REG_STATE_BUSHOLD		0x00010
+#define REG_STATE_STATE__MASK		0x000e0
+#define REG_STATE_STATE_IDLE		0x00000
+#define REG_STATE_STATE_WAIT		0x00020
+#define REG_STATE_STATE_START		0x00040
+#define REG_STATE_STATE_ADDR		0x00060
+#define REG_STATE_STATE_ADDRACK		0x00080
+#define REG_STATE_STATE_DATA		0x000a0
+#define REG_STATE_STATE_DATAACK		0x000c0
+
+#define REG_STATUS		0x0c
+#define REG_STATUS_PSTART		0x00001
+#define REG_STATUS_PSTOP		0x00002
+#define REG_STATUS_PACK			0x00004
+#define REG_STATUS_PNACK		0x00008
+#define REG_STATUS_PCONT		0x00010
+#define REG_STATUS_PABORT		0x00020
+#define REG_STATUS_TXC			0x00040
+#define REG_STATUS_TXBL			0x00080
+#define REG_STATUS_RXDATAV		0x00100
+
+#define REG_CLKDIV		0x10
+#define REG_CLKDIV_DIV__MASK		0x001ff
+#define REG_CLKDIV_DIV(div)		MASK_VAL(REG_CLKDIV_DIV__MASK, (div))
+
+#define REG_SADDR		0x14
+#define REG_SADDRMASK		0x18
+#define REG_RXDATA		0x1c
+#define REG_RXDATAP		0x20
+#define REG_TXDATA		0x24
+#define REG_IF			0x28
+#define REG_IF_START			0x00001
+#define REG_IF_RSTART			0x00002
+#define REG_IF_ADDR			0x00004
+#define REG_IF_TXC			0x00008
+#define REG_IF_TXBL			0x00010
+#define REG_IF_RXDATAV			0x00020
+#define REG_IF_ACK			0x00040
+#define REG_IF_NACK			0x00080
+#define REG_IF_MSTOP			0x00100
+#define REG_IF_ARBLOST			0x00200
+#define REG_IF_BUSERR			0x00400
+#define REG_IF_BUSHOLD			0x00800
+#define REG_IF_TXOF			0x01000
+#define REG_IF_RXUF			0x02000
+#define REG_IF_BITO			0x04000
+#define REG_IF_CLTO			0x08000
+#define REG_IF_SSTOP			0x10000
+
+#define REG_IFS			0x2c
+#define REG_IFC			0x30
+#define REG_IFC__MASK			0x1ffcf
+
+#define REG_IEN			0x34
+
+#define REG_ROUTE		0x38
+#define REG_ROUTE_SDAPEN		0x00001
+#define REG_ROUTE_SCLPEN		0x00002
+#define REG_ROUTE_LOCATION__MASK	0x00700
+#define REG_ROUTE_LOCATION(n)		MASK_VAL(REG_ROUTE_LOCATION__MASK, (n))
+
+struct efm32_i2c_ddata {
+	struct i2c_adapter adapter;
+
+	struct clk *clk;
+	void __iomem *base;
+	unsigned int irq;
+	u8 location;
+	unsigned long frequency;
+
+	/* transfer data */
+	struct completion done;
+	struct i2c_msg *msgs;
+	size_t num_msgs;
+	size_t current_word, current_msg;
+	int retval;
+};
+
+static u32 efm32_i2c_read32(struct efm32_i2c_ddata *ddata, unsigned offset)
+{
+	return readl(ddata->base + offset);
+}
+
+static void efm32_i2c_write32(struct efm32_i2c_ddata *ddata,
+		unsigned offset, u32 value)
+{
+	writel(value, ddata->base + offset);
+}
+
+static void efm32_i2c_send_next_msg(struct efm32_i2c_ddata *ddata)
+{
+	struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
+
+	efm32_i2c_write32(ddata, REG_CMD, REG_CMD_START);
+	efm32_i2c_write32(ddata, REG_TXDATA, cur_msg->addr << 1 |
+			(cur_msg->flags & I2C_M_RD ? 1 : 0));
+}
+
+static void efm32_i2c_send_next_byte(struct efm32_i2c_ddata *ddata)
+{
+	struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
+
+	if (ddata->current_word >= cur_msg->len) {
+		/* cur_msg completely transferred */
+		ddata->current_word = 0;
+		ddata->current_msg += 1;
+
+		if (ddata->current_msg >= ddata->num_msgs) {
+			efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
+			complete(&ddata->done);
+		} else {
+			efm32_i2c_send_next_msg(ddata);
+		}
+	} else {
+		efm32_i2c_write32(ddata, REG_TXDATA,
+				cur_msg->buf[ddata->current_word++]);
+	}
+}
+
+static void efm32_i2c_recv_next_byte(struct efm32_i2c_ddata *ddata)
+{
+	struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
+
+	cur_msg->buf[ddata->current_word] = efm32_i2c_read32(ddata, REG_RXDATA);
+	ddata->current_word += 1;
+	if (ddata->current_word >= cur_msg->len) {
+		/* cur_msg completely transferred */
+		ddata->current_word = 0;
+		ddata->current_msg += 1;
+
+		efm32_i2c_write32(ddata, REG_CMD, REG_CMD_NACK);
+
+		if (ddata->current_msg >= ddata->num_msgs) {
+			efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
+			complete(&ddata->done);
+		} else {
+			efm32_i2c_send_next_msg(ddata);
+		}
+	} else {
+		efm32_i2c_write32(ddata, REG_CMD, REG_CMD_ACK);
+	}
+}
+
+static irqreturn_t efm32_i2c_irq(int irq, void *dev_id)
+{
+	struct efm32_i2c_ddata *ddata = dev_id;
+	struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
+	u32 irqflag = efm32_i2c_read32(ddata, REG_IF);
+	u32 state = efm32_i2c_read32(ddata, REG_STATE);
+
+	efm32_i2c_write32(ddata, REG_IFC, irqflag & REG_IFC__MASK);
+
+	switch (state & REG_STATE_STATE__MASK) {
+	case REG_STATE_STATE_IDLE:
+		/* arbitration lost? */
+		ddata->retval = -EAGAIN;
+		complete(&ddata->done);
+		break;
+	case REG_STATE_STATE_WAIT:
+		/*
+		 * huh, this shouldn't happen.
+		 * Reset hardware state and get out
+		 */
+		ddata->retval = -EIO;
+		efm32_i2c_write32(ddata, REG_CMD,
+				REG_CMD_STOP | REG_CMD_ABORT |
+				REG_CMD_CLEARTX | REG_CMD_CLEARPC);
+		complete(&ddata->done);
+		break;
+	case REG_STATE_STATE_START:
+		/* "caller" is expected to send an address */
+		break;
+	case REG_STATE_STATE_ADDR:
+		/* wait for Ack or NAck of slave */
+		break;
+	case REG_STATE_STATE_ADDRACK:
+		if (state & REG_STATE_NACKED) {
+			efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
+			ddata->retval = -ENXIO;
+			complete(&ddata->done);
+		} else if (cur_msg->flags & I2C_M_RD) {
+			/* wait for slave to send first data byte */
+		} else {
+			efm32_i2c_send_next_byte(ddata);
+		}
+		break;
+	case REG_STATE_STATE_DATA:
+		if (cur_msg->flags & I2C_M_RD) {
+			efm32_i2c_recv_next_byte(ddata);
+		} else {
+			/* wait for Ack or Nack of slave */
+		}
+		break;
+	case REG_STATE_STATE_DATAACK:
+		if (state & REG_STATE_NACKED) {
+			efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
+			complete(&ddata->done);
+		} else {
+			efm32_i2c_send_next_byte(ddata);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int efm32_i2c_master_xfer(struct i2c_adapter *adap,
+		struct i2c_msg *msgs, int num)
+{
+	struct efm32_i2c_ddata *ddata = i2c_get_adapdata(adap);
+	int ret;
+
+	if (ddata->msgs)
+		return -EBUSY;
+
+	ddata->msgs = msgs;
+	ddata->num_msgs = num;
+	ddata->current_word = 0;
+	ddata->current_msg = 0;
+	ddata->retval = -EIO;
+
+	reinit_completion(&ddata->done);
+
+	dev_dbg(&ddata->adapter.dev, "state: %08x, status: %08x\n",
+			efm32_i2c_read32(ddata, REG_STATE),
+			efm32_i2c_read32(ddata, REG_STATUS));
+
+	efm32_i2c_send_next_msg(ddata);
+
+	wait_for_completion(&ddata->done);
+
+	if (ddata->current_msg >= ddata->num_msgs)
+		ret = ddata->num_msgs;
+	else
+		ret = ddata->retval;
+
+	return ret;
+}
+
+static u32 efm32_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm efm32_i2c_algo = {
+	.master_xfer = efm32_i2c_master_xfer,
+	.functionality = efm32_i2c_functionality,
+};
+
+static u32 efm32_i2c_get_configured_location(struct efm32_i2c_ddata *ddata)
+{
+	u32 reg = efm32_i2c_read32(ddata, REG_ROUTE);
+
+	return (reg & REG_ROUTE_LOCATION__MASK) >>
+		__ffs(REG_ROUTE_LOCATION__MASK);
+}
+
+static int efm32_i2c_probe(struct platform_device *pdev)
+{
+	struct efm32_i2c_ddata *ddata;
+	struct resource *res;
+	unsigned long rate;
+	struct device_node *np = pdev->dev.of_node;
+	u32 location, frequency;
+	int ret;
+	u32 clkdiv;
+
+	if (!np)
+		return -EINVAL;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata) {
+		dev_dbg(&pdev->dev, "failed to allocate private data\n");
+		return -ENOMEM;
+	}
+	platform_set_drvdata(pdev, ddata);
+
+	init_completion(&ddata->done);
+	strlcpy(ddata->adapter.name, pdev->name, sizeof(ddata->adapter.name));
+	ddata->adapter.owner = THIS_MODULE;
+	ddata->adapter.algo = &efm32_i2c_algo;
+	ddata->adapter.dev.parent = &pdev->dev;
+	ddata->adapter.dev.of_node = pdev->dev.of_node;
+	i2c_set_adapdata(&ddata->adapter, ddata);
+
+	ddata->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(ddata->clk)) {
+		ret = PTR_ERR(ddata->clk);
+		dev_err(&pdev->dev, "failed to get clock: %d\n", ret);
+		return ret;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to determine base address\n");
+		return -ENODEV;
+	}
+
+	if (resource_size(res) < 0x42) {
+		dev_err(&pdev->dev, "memory resource too small\n");
+		return -EINVAL;
+	}
+
+	ddata->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ddata->base))
+		return PTR_ERR(ddata->base);
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret <= 0) {
+		dev_err(&pdev->dev, "failed to get irq (%d)\n", ret);
+		if (!ret)
+			ret = -EINVAL;
+		return ret;
+	}
+
+	ddata->irq = ret;
+
+	ret = clk_prepare_enable(ddata->clk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to enable clock (%d)\n", ret);
+		return ret;
+	}
+
+	ret = of_property_read_u32(np, "efm32,location", &location);
+	if (!ret) {
+		dev_dbg(&pdev->dev, "using location %u\n", location);
+	} else {
+		/* default to location configured in hardware */
+		location = efm32_i2c_get_configured_location(ddata);
+
+		dev_info(&pdev->dev, "fall back to location %u\n", location);
+	}
+
+	ddata->location = location;
+
+	ret = of_property_read_u32(np, "clock-frequency", &frequency);
+	if (!ret) {
+		dev_dbg(&pdev->dev, "using frequency %u\n", frequency);
+	} else {
+		frequency = 100000;
+		dev_info(&pdev->dev, "defaulting to 100 kHz\n");
+	}
+	ddata->frequency = frequency;
+
+	rate = clk_get_rate(ddata->clk);
+	if (!rate) {
+		dev_err(&pdev->dev, "there is no input clock available\n");
+		ret = -EINVAL;
+		goto err_disable_clk;
+	}
+	clkdiv = DIV_ROUND_UP(rate, 8 * ddata->frequency) - 1;
+	if (clkdiv >= 0x200) {
+		dev_err(&pdev->dev,
+				"input clock too fast (%lu) to divide down to bus freq (%lu)",
+				rate, ddata->frequency);
+		ret = -EINVAL;
+		goto err_disable_clk;
+	}
+
+	dev_dbg(&pdev->dev, "input clock = %lu, bus freq = %lu, clkdiv = %lu\n",
+			rate, ddata->frequency, (unsigned long)clkdiv);
+	efm32_i2c_write32(ddata, REG_CLKDIV, REG_CLKDIV_DIV(clkdiv));
+
+	efm32_i2c_write32(ddata, REG_ROUTE, REG_ROUTE_SDAPEN |
+			REG_ROUTE_SCLPEN |
+			REG_ROUTE_LOCATION(ddata->location));
+
+	efm32_i2c_write32(ddata, REG_CTRL, REG_CTRL_EN |
+			REG_CTRL_BITO_160PCC | 0 * REG_CTRL_GIBITO);
+
+	efm32_i2c_write32(ddata, REG_IFC, REG_IFC__MASK);
+	efm32_i2c_write32(ddata, REG_IEN, REG_IF_TXC | REG_IF_ACK | REG_IF_NACK
+			| REG_IF_ARBLOST | REG_IF_BUSERR | REG_IF_RXDATAV);
+
+	/* to make bus idle */
+	efm32_i2c_write32(ddata, REG_CMD, REG_CMD_ABORT);
+
+	ret = request_irq(ddata->irq, efm32_i2c_irq, 0, DRIVER_NAME, ddata);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to request irq (%d)\n", ret);
+		return ret;
+	}
+
+	ret = i2c_add_adapter(&ddata->adapter);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add i2c adapter (%d)\n", ret);
+		free_irq(ddata->irq, ddata);
+
+err_disable_clk:
+		clk_disable_unprepare(ddata->clk);
+	}
+	return ret;
+}
+
+static int efm32_i2c_remove(struct platform_device *pdev)
+{
+	struct efm32_i2c_ddata *ddata = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&ddata->adapter);
+	free_irq(ddata->irq, ddata);
+	clk_disable_unprepare(ddata->clk);
+
+	return 0;
+}
+
+static const struct of_device_id efm32_i2c_dt_ids[] = {
+	{
+		.compatible = "energymicro,efm32-i2c",
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, efm32_i2c_dt_ids);
+
+static struct platform_driver efm32_i2c_driver = {
+	.probe = efm32_i2c_probe,
+	.remove = efm32_i2c_remove,
+
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = efm32_i2c_dt_ids,
+	},
+};
+module_platform_driver(efm32_i2c_driver);
+
+MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>");
+MODULE_DESCRIPTION("EFM32 i2c driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index e08e458bab02..ff775ac29e49 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -186,7 +186,7 @@ static DEFINE_MUTEX(pch_mutex);
 #define PCI_DEVICE_ID_ML7223_I2C	0x8010
 #define PCI_DEVICE_ID_ML7831_I2C	0x8817
 
-static DEFINE_PCI_DEVICE_TABLE(pch_pcidev_id) = {
+static const struct pci_device_id pch_pcidev_id[] = {
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_I2C),   1, },
 	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_I2C), 2, },
 	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_I2C), 1, },
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index 9fd711c03dd2..00af0a0a3361 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -566,7 +566,7 @@ static int exynos5_i2c_xfer_msg(struct exynos5_i2c *i2c,
 static int exynos5_i2c_xfer(struct i2c_adapter *adap,
 			struct i2c_msg *msgs, int num)
 {
-	struct exynos5_i2c *i2c = (struct exynos5_i2c *)adap->algo_data;
+	struct exynos5_i2c *i2c = adap->algo_data;
 	int i = 0, ret = 0, stop = 0;
 
 	if (i2c->suspended) {
@@ -715,6 +715,7 @@ static int exynos5_i2c_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
 static int exynos5_i2c_suspend_noirq(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -745,6 +746,7 @@ static int exynos5_i2c_resume_noirq(struct device *dev)
 
 	return 0;
 }
+#endif
 
 static SIMPLE_DEV_PM_OPS(exynos5_i2c_dev_pm_ops, exynos5_i2c_suspend_noirq,
 			 exynos5_i2c_resume_noirq);
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index d9f7e186a4c7..02d2d4abb9dd 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -94,6 +94,9 @@ static int of_i2c_gpio_get_pins(struct device_node *np,
 	*sda_pin = of_get_gpio(np, 0);
 	*scl_pin = of_get_gpio(np, 1);
 
+	if (*sda_pin == -EPROBE_DEFER || *scl_pin == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+
 	if (!gpio_is_valid(*sda_pin) || !gpio_is_valid(*scl_pin)) {
 		pr_err("%s: invalid GPIO pins, sda=%d/scl=%d\n",
 		       np->full_name, *sda_pin, *scl_pin);
diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c
index e248257fe517..14d2b76de25f 100644
--- a/drivers/i2c/busses/i2c-hydra.c
+++ b/drivers/i2c/busses/i2c-hydra.c
@@ -104,7 +104,7 @@ static struct i2c_adapter hydra_adap = {
 	.algo_data	= &hydra_bit_data,
 };
 
-static DEFINE_PCI_DEVICE_TABLE(hydra_ids) = {
+static const struct pci_device_id hydra_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_HYDRA) },
 	{ 0, }
 };
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 349c2d35e792..6777cd6f8776 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -60,6 +60,7 @@
   Wellsburg (PCH) MS    0x8d7f     32     hard     yes     yes     yes
   Coleto Creek (PCH)    0x23b0     32     hard     yes     yes     yes
   Wildcat Point-LP (PCH)   0x9ca2     32     hard     yes     yes     yes
+  BayTrail (SOC)        0x0f12     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -161,6 +162,7 @@
 				 STATUS_ERROR_FLAGS)
 
 /* Older devices have their ID defined in <linux/pci_ids.h> */
+#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS	0x0f12
 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS	0x1c22
 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS	0x1d22
 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */
@@ -789,7 +791,7 @@ static const struct i2c_algorithm smbus_algorithm = {
 	.functionality	= i801_func,
 };
 
-static DEFINE_PCI_DEVICE_TABLE(i801_ids) = {
+static const struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_2) },
@@ -822,6 +824,7 @@ static DEFINE_PCI_DEVICE_TABLE(i801_ids) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
 	{ 0, }
 };
 
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index 8ce4f517fc56..984492553e95 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -182,7 +182,7 @@ struct ismt_priv {
 /**
  * ismt_ids - PCI device IDs supported by this driver
  */
-static DEFINE_PCI_DEVICE_TABLE(ismt_ids) = {
+static const struct pci_device_id ismt_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT0) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT1) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMT) },
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index d52d84937ad3..540ea692bf79 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -17,6 +17,7 @@
 #include <linux/interrupt.h>
 #include <linux/mv643xx_i2c.h>
 #include <linux/platform_device.h>
+#include <linux/reset.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -97,7 +98,6 @@ enum {
 enum {
 	MV64XXX_I2C_ACTION_INVALID,
 	MV64XXX_I2C_ACTION_CONTINUE,
-	MV64XXX_I2C_ACTION_SEND_START,
 	MV64XXX_I2C_ACTION_SEND_RESTART,
 	MV64XXX_I2C_ACTION_OFFLOAD_RESTART,
 	MV64XXX_I2C_ACTION_SEND_ADDR_1,
@@ -148,6 +148,8 @@ struct mv64xxx_i2c_data {
 	bool			offload_enabled;
 /* 5us delay in order to avoid repeated start timing violation */
 	bool			errata_delay;
+	struct reset_control	*rstc;
+	bool			irq_clear_inverted;
 };
 
 static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_mv64xxx = {
@@ -176,11 +178,6 @@ mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data,
 {
 	u32	dir = 0;
 
-	drv_data->msg = msg;
-	drv_data->byte_posn = 0;
-	drv_data->bytes_left = msg->len;
-	drv_data->aborting = 0;
-	drv_data->rc = 0;
 	drv_data->cntl_bits = MV64XXX_I2C_REG_CONTROL_ACK |
 		MV64XXX_I2C_REG_CONTROL_INTEN | MV64XXX_I2C_REG_CONTROL_TWSIEN;
 
@@ -206,11 +203,6 @@ static int mv64xxx_i2c_offload_msg(struct mv64xxx_i2c_data *drv_data)
 	if (!drv_data->offload_enabled)
 		return -EOPNOTSUPP;
 
-	drv_data->msg = msg;
-	drv_data->byte_posn = 0;
-	drv_data->bytes_left = msg->len;
-	drv_data->aborting = 0;
-	drv_data->rc = 0;
 	/* Only regular transactions can be offloaded */
 	if ((msg->flags & ~(I2C_M_TEN | I2C_M_RD)) != 0)
 		return -EINVAL;
@@ -419,6 +411,23 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
 	}
 }
 
+static void mv64xxx_i2c_send_start(struct mv64xxx_i2c_data *drv_data)
+{
+	drv_data->msg = drv_data->msgs;
+	drv_data->byte_posn = 0;
+	drv_data->bytes_left = drv_data->msg->len;
+	drv_data->aborting = 0;
+	drv_data->rc = 0;
+
+	/* Can we offload this msg ? */
+	if (mv64xxx_i2c_offload_msg(drv_data) < 0) {
+		/* No, switch to standard path */
+		mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs);
+		writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START,
+			drv_data->reg_base + drv_data->reg_offsets.control);
+	}
+}
+
 static void
 mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
 {
@@ -435,14 +444,8 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
 
 		drv_data->msgs++;
 		drv_data->num_msgs--;
-		if (mv64xxx_i2c_offload_msg(drv_data) < 0) {
-			drv_data->cntl_bits |= MV64XXX_I2C_REG_CONTROL_START;
-			writel(drv_data->cntl_bits,
-			drv_data->reg_base + drv_data->reg_offsets.control);
+		mv64xxx_i2c_send_start(drv_data);
 
-			/* Setup for the next message */
-			mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs);
-		}
 		if (drv_data->errata_delay)
 			udelay(5);
 
@@ -459,16 +462,6 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
 			drv_data->reg_base + drv_data->reg_offsets.control);
 		break;
 
-	case MV64XXX_I2C_ACTION_SEND_START:
-		/* Can we offload this msg ? */
-		if (mv64xxx_i2c_offload_msg(drv_data) < 0) {
-			/* No, switch to standard path */
-			mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs);
-			writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START,
-				drv_data->reg_base + drv_data->reg_offsets.control);
-		}
-		break;
-
 	case MV64XXX_I2C_ACTION_SEND_ADDR_1:
 		writel(drv_data->addr1,
 			drv_data->reg_base + drv_data->reg_offsets.data);
@@ -566,6 +559,11 @@ mv64xxx_i2c_intr(int irq, void *dev_id)
 		status = readl(drv_data->reg_base + drv_data->reg_offsets.status);
 		mv64xxx_i2c_fsm(drv_data, status);
 		mv64xxx_i2c_do_action(drv_data);
+
+		if (drv_data->irq_clear_inverted)
+			writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_IFLG,
+			       drv_data->reg_base + drv_data->reg_offsets.control);
+
 		rc = IRQ_HANDLED;
 	}
 	spin_unlock_irqrestore(&drv_data->lock, flags);
@@ -626,12 +624,11 @@ mv64xxx_i2c_execute_msg(struct mv64xxx_i2c_data *drv_data, struct i2c_msg *msg,
 
 	spin_lock_irqsave(&drv_data->lock, flags);
 
-	drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
 	drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
 
 	drv_data->send_stop = is_last;
 	drv_data->block = 1;
-	mv64xxx_i2c_do_action(drv_data);
+	mv64xxx_i2c_send_start(drv_data);
 	spin_unlock_irqrestore(&drv_data->lock, flags);
 
 	mv64xxx_i2c_wait_for_completion(drv_data);
@@ -685,6 +682,7 @@ static const struct i2c_algorithm mv64xxx_i2c_algo = {
  */
 static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
 	{ .compatible = "allwinner,sun4i-i2c", .data = &mv64xxx_i2c_regs_sun4i},
+	{ .compatible = "allwinner,sun6i-a31-i2c", .data = &mv64xxx_i2c_regs_sun4i},
 	{ .compatible = "marvell,mv64xxx-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
 	{ .compatible = "marvell,mv78230-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
 	{ .compatible = "marvell,mv78230-a0-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
@@ -759,6 +757,16 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
 	}
 	drv_data->irq = irq_of_parse_and_map(np, 0);
 
+	drv_data->rstc = devm_reset_control_get_optional(dev, NULL);
+	if (IS_ERR(drv_data->rstc)) {
+		if (PTR_ERR(drv_data->rstc) == -EPROBE_DEFER) {
+			rc = -EPROBE_DEFER;
+			goto out;
+		}
+	} else {
+		reset_control_deassert(drv_data->rstc);
+	}
+
 	/* Its not yet defined how timeouts will be specified in device tree.
 	 * So hard code the value to 1 second.
 	 */
@@ -783,6 +791,10 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
 		drv_data->offload_enabled = false;
 		drv_data->errata_delay = true;
 	}
+
+	if (of_device_is_compatible(np, "allwinner,sun6i-a31-i2c"))
+		drv_data->irq_clear_inverted = true;
+
 out:
 	return rc;
 #endif
@@ -845,13 +857,13 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 	}
 	if (drv_data->irq < 0) {
 		rc = -ENXIO;
-		goto exit_clk;
+		goto exit_reset;
 	}
 
 	drv_data->adapter.dev.parent = &pd->dev;
 	drv_data->adapter.algo = &mv64xxx_i2c_algo;
 	drv_data->adapter.owner = THIS_MODULE;
-	drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+	drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED;
 	drv_data->adapter.nr = pd->id;
 	drv_data->adapter.dev.of_node = pd->dev.of_node;
 	platform_set_drvdata(pd, drv_data);
@@ -865,7 +877,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 		dev_err(&drv_data->adapter.dev,
 			"mv64xxx: Can't register intr handler irq%d: %d\n",
 			drv_data->irq, rc);
-		goto exit_clk;
+		goto exit_reset;
 	} else if ((rc = i2c_add_numbered_adapter(&drv_data->adapter)) != 0) {
 		dev_err(&drv_data->adapter.dev,
 			"mv64xxx: Can't add i2c adapter, rc: %d\n", -rc);
@@ -876,6 +888,9 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 
 exit_free_irq:
 	free_irq(drv_data->irq, drv_data);
+exit_reset:
+	if (!IS_ERR_OR_NULL(drv_data->rstc))
+		reset_control_assert(drv_data->rstc);
 exit_clk:
 #if defined(CONFIG_HAVE_CLK)
 	/* Not all platforms have a clk */
@@ -894,6 +909,8 @@ mv64xxx_i2c_remove(struct platform_device *dev)
 
 	i2c_del_adapter(&drv_data->adapter);
 	free_irq(drv_data->irq, drv_data);
+	if (!IS_ERR_OR_NULL(drv_data->rstc))
+		reset_control_assert(drv_data->rstc);
 #if defined(CONFIG_HAVE_CLK)
 	/* Not all platforms have a clk */
 	if (!IS_ERR(drv_data->clk)) {
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 0cde4e6ab2b2..7170fc892829 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -806,7 +806,6 @@ static int mxs_i2c_probe(struct platform_device *pdev)
 	struct mxs_i2c_dev *i2c;
 	struct i2c_adapter *adap;
 	struct resource *res;
-	resource_size_t res_size;
 	int err, irq;
 
 	i2c = devm_kzalloc(dev, sizeof(struct mxs_i2c_dev), GFP_KERNEL);
@@ -819,18 +818,13 @@ static int mxs_i2c_probe(struct platform_device *pdev)
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	irq = platform_get_irq(pdev, 0);
-
-	if (!res || irq < 0)
-		return -ENOENT;
+	i2c->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(i2c->regs))
+		return PTR_ERR(i2c->regs);
 
-	res_size = resource_size(res);
-	if (!devm_request_mem_region(dev, res->start, res_size, res->name))
-		return -EBUSY;
-
-	i2c->regs = devm_ioremap_nocache(dev, res->start, res_size);
-	if (!i2c->regs)
-		return -EBUSY;
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
 
 	err = devm_request_irq(dev, irq, mxs_i2c_isr, 0, dev_name(dev), i2c);
 	if (err)
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 0038c451095c..ee3a76c7ae97 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -306,7 +306,7 @@ static struct i2c_algorithm smbus_algorithm = {
 };
 
 
-static DEFINE_PCI_DEVICE_TABLE(nforce2_ids) = {
+static const struct pci_device_id nforce2_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS) },
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 4443613514ee..28cbe1b2a2ec 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -111,22 +111,6 @@ enum i2c_freq_mode {
 };
 
 /**
- * struct nmk_i2c_controller - client specific controller configuration
- * @clk_freq:	clock frequency for the operation mode
- * @tft:	Tx FIFO Threshold in bytes
- * @rft:	Rx FIFO Threshold in bytes
- * @timeout	Slave response timeout(ms)
- * @sm:		speed mode
- */
-struct nmk_i2c_controller {
-	u32             clk_freq;
-	unsigned char	tft;
-	unsigned char	rft;
-	int timeout;
-	enum i2c_freq_mode	sm;
-};
-
-/**
  * struct i2c_vendor_data - per-vendor variations
  * @has_mtdws: variant has the MTDWS bit
  * @fifodepth: variant FIFO depth
@@ -174,12 +158,15 @@ struct i2c_nmk_client {
  * @irq: interrupt line for the controller.
  * @virtbase: virtual io memory area.
  * @clk: hardware i2c block clock.
- * @cfg: machine provided controller configuration.
  * @cli: holder of client specific data.
+ * @clk_freq: clock frequency for the operation mode
+ * @tft: Tx FIFO Threshold in bytes
+ * @rft: Rx FIFO Threshold in bytes
+ * @timeout Slave response timeout (ms)
+ * @sm: speed mode
  * @stop: stop condition.
  * @xfer_complete: acknowledge completion for a I2C message.
  * @result: controller propogated result.
- * @busy: Busy doing transfer.
  */
 struct nmk_i2c_dev {
 	struct i2c_vendor_data		*vendor;
@@ -188,12 +175,15 @@ struct nmk_i2c_dev {
 	int				irq;
 	void __iomem			*virtbase;
 	struct clk			*clk;
-	struct nmk_i2c_controller	cfg;
 	struct i2c_nmk_client		cli;
+	u32				clk_freq;
+	unsigned char			tft;
+	unsigned char			rft;
+	int				timeout;
+	enum i2c_freq_mode		sm;
 	int				stop;
 	struct completion		xfer_complete;
 	int				result;
-	bool				busy;
 };
 
 /* controller's abort causes */
@@ -386,7 +376,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
 	 * slsu = cycles / (1000000000 / f) + 1
 	 */
 	ns = DIV_ROUND_UP_ULL(1000000000ULL, i2c_clk);
-	switch (dev->cfg.sm) {
+	switch (dev->sm) {
 	case I2C_FREQ_MODE_FAST:
 	case I2C_FREQ_MODE_FAST_PLUS:
 		slsu = DIV_ROUND_UP(100, ns); /* Fast */
@@ -409,7 +399,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
 	 * 2 whereas it is 3 for fast and fastplus mode of
 	 * operation. TODO - high speed support.
 	 */
-	div = (dev->cfg.clk_freq > 100000) ? 3 : 2;
+	div = (dev->clk_freq > 100000) ? 3 : 2;
 
 	/*
 	 * generate the mask for baud rate counters. The controller
@@ -419,7 +409,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
 	 * so set brcr1 to 0.
 	 */
 	brcr1 = 0 << 16;
-	brcr2 = (i2c_clk/(dev->cfg.clk_freq * div)) & 0xffff;
+	brcr2 = (i2c_clk/(dev->clk_freq * div)) & 0xffff;
 
 	/* set the baud rate counter register */
 	writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR);
@@ -430,7 +420,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
 	 * TODO - support for fast mode plus (up to 1Mb/s)
 	 * and high speed (up to 3.4 Mb/s)
 	 */
-	if (dev->cfg.sm > I2C_FREQ_MODE_FAST) {
+	if (dev->sm > I2C_FREQ_MODE_FAST) {
 		dev_err(&dev->adev->dev,
 			"do not support this mode defaulting to std. mode\n");
 		brcr2 = i2c_clk/(100000 * 2) & 0xffff;
@@ -438,11 +428,11 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
 		writel(I2C_FREQ_MODE_STANDARD << 4,
 				dev->virtbase + I2C_CR);
 	}
-	writel(dev->cfg.sm << 4, dev->virtbase + I2C_CR);
+	writel(dev->sm << 4, dev->virtbase + I2C_CR);
 
 	/* set the Tx and Rx FIFO threshold */
-	writel(dev->cfg.tft, dev->virtbase + I2C_TFTR);
-	writel(dev->cfg.rft, dev->virtbase + I2C_RFTR);
+	writel(dev->tft, dev->virtbase + I2C_TFTR);
+	writel(dev->rft, dev->virtbase + I2C_RFTR);
 }
 
 /**
@@ -674,28 +664,13 @@ static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags)
 static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
 		struct i2c_msg msgs[], int num_msgs)
 {
-	int status;
+	int status = 0;
 	int i;
 	struct nmk_i2c_dev *dev = i2c_get_adapdata(i2c_adap);
 	int j;
 
-	dev->busy = true;
-
 	pm_runtime_get_sync(&dev->adev->dev);
 
-	status = clk_prepare_enable(dev->clk);
-	if (status) {
-		dev_err(&dev->adev->dev, "can't prepare_enable clock\n");
-		goto out_clk;
-	}
-
-	/* Optionaly enable pins to be muxed in and configured */
-	pinctrl_pm_select_default_state(&dev->adev->dev);
-
-	status = init_hw(dev);
-	if (status)
-		goto out;
-
 	/* Attempt three times to send the message queue */
 	for (j = 0; j < 3; j++) {
 		/* setup the i2c controller */
@@ -716,16 +691,8 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
 			break;
 	}
 
-out:
-	clk_disable_unprepare(dev->clk);
-out_clk:
-	/* Optionally let pins go into idle state */
-	pinctrl_pm_select_idle_state(&dev->adev->dev);
-
 	pm_runtime_put_sync(&dev->adev->dev);
 
-	dev->busy = false;
-
 	/* return the no. messages processed */
 	if (status)
 		return status;
@@ -909,22 +876,15 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
 	return IRQ_HANDLED;
 }
 
-
-#ifdef CONFIG_PM
-static int nmk_i2c_suspend(struct device *dev)
+#ifdef CONFIG_PM_SLEEP
+static int nmk_i2c_suspend_late(struct device *dev)
 {
-	struct amba_device *adev = to_amba_device(dev);
-	struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
-
-	if (nmk_i2c->busy)
-		return -EBUSY;
-
 	pinctrl_pm_select_sleep_state(dev);
 
 	return 0;
 }
 
-static int nmk_i2c_resume(struct device *dev)
+static int nmk_i2c_resume_early(struct device *dev)
 {
 	/* First go to the default state */
 	pinctrl_pm_select_default_state(dev);
@@ -933,19 +893,48 @@ static int nmk_i2c_resume(struct device *dev)
 
 	return 0;
 }
-#else
-#define nmk_i2c_suspend	NULL
-#define nmk_i2c_resume	NULL
 #endif
 
-/*
- * We use noirq so that we suspend late and resume before the wakeup interrupt
- * to ensure that we do the !pm_runtime_suspended() check in resume before
- * there has been a regular pm runtime resume (via pm_runtime_get_sync()).
- */
+#ifdef CONFIG_PM
+static int nmk_i2c_runtime_suspend(struct device *dev)
+{
+	struct amba_device *adev = to_amba_device(dev);
+	struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
+
+	clk_disable_unprepare(nmk_i2c->clk);
+	pinctrl_pm_select_idle_state(dev);
+	return 0;
+}
+
+static int nmk_i2c_runtime_resume(struct device *dev)
+{
+	struct amba_device *adev = to_amba_device(dev);
+	struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
+	int ret;
+
+	ret = clk_prepare_enable(nmk_i2c->clk);
+	if (ret) {
+		dev_err(dev, "can't prepare_enable clock\n");
+		return ret;
+	}
+
+	pinctrl_pm_select_default_state(dev);
+
+	ret = init_hw(nmk_i2c);
+	if (ret) {
+		clk_disable_unprepare(nmk_i2c->clk);
+		pinctrl_pm_select_idle_state(dev);
+	}
+
+	return ret;
+}
+#endif
+
 static const struct dev_pm_ops nmk_i2c_pm = {
-	.suspend_noirq	= nmk_i2c_suspend,
-	.resume_noirq	= nmk_i2c_resume,
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(nmk_i2c_suspend_late, nmk_i2c_resume_early)
+	SET_PM_RUNTIME_PM_OPS(nmk_i2c_runtime_suspend,
+			nmk_i2c_runtime_resume,
+			NULL)
 };
 
 static unsigned int nmk_i2c_functionality(struct i2c_adapter *adap)
@@ -958,118 +947,98 @@ static const struct i2c_algorithm nmk_i2c_algo = {
 	.functionality	= nmk_i2c_functionality
 };
 
-static struct nmk_i2c_controller u8500_i2c = {
-	.tft            = 1,      /* Tx FIFO threshold */
-	.rft            = 8,      /* Rx FIFO threshold */
-	.clk_freq       = 400000, /* fast mode operation */
-	.timeout        = 200,    /* Slave response timeout(ms) */
-	.sm             = I2C_FREQ_MODE_FAST,
-};
-
 static void nmk_i2c_of_probe(struct device_node *np,
-			struct nmk_i2c_controller *pdata)
+			     struct nmk_i2c_dev *nmk)
 {
-	of_property_read_u32(np, "clock-frequency", &pdata->clk_freq);
+	/* Default to 100 kHz if no frequency is given in the node */
+	if (of_property_read_u32(np, "clock-frequency", &nmk->clk_freq))
+		nmk->clk_freq = 100000;
 
 	/* This driver only supports 'standard' and 'fast' modes of operation. */
-	if (pdata->clk_freq <= 100000)
-		pdata->sm = I2C_FREQ_MODE_STANDARD;
+	if (nmk->clk_freq <= 100000)
+		nmk->sm = I2C_FREQ_MODE_STANDARD;
 	else
-		pdata->sm = I2C_FREQ_MODE_FAST;
+		nmk->sm = I2C_FREQ_MODE_FAST;
+	nmk->tft = 1; /* Tx FIFO threshold */
+	nmk->rft = 8; /* Rx FIFO threshold */
+	nmk->timeout = 200; /* Slave response timeout(ms) */
 }
 
 static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 {
 	int ret = 0;
-	struct nmk_i2c_controller *pdata = dev_get_platdata(&adev->dev);
 	struct device_node *np = adev->dev.of_node;
 	struct nmk_i2c_dev	*dev;
 	struct i2c_adapter *adap;
 	struct i2c_vendor_data *vendor = id->data;
 	u32 max_fifo_threshold = (vendor->fifodepth / 2) - 1;
 
-	if (!pdata) {
-		if (np) {
-			pdata = devm_kzalloc(&adev->dev, sizeof(*pdata), GFP_KERNEL);
-			if (!pdata) {
-				ret = -ENOMEM;
-				goto err_no_mem;
-			}
-			/* Provide the default configuration as a base. */
-			memcpy(pdata, &u8500_i2c, sizeof(struct nmk_i2c_controller));
-			nmk_i2c_of_probe(np, pdata);
-		} else
-			/* No i2c configuration found, using the default. */
-			pdata = &u8500_i2c;
+	dev = devm_kzalloc(&adev->dev, sizeof(struct nmk_i2c_dev), GFP_KERNEL);
+	if (!dev) {
+		dev_err(&adev->dev, "cannot allocate memory\n");
+		ret = -ENOMEM;
+		goto err_no_mem;
 	}
+	dev->vendor = vendor;
+	dev->adev = adev;
+	nmk_i2c_of_probe(np, dev);
 
-	if (pdata->tft > max_fifo_threshold) {
+	if (dev->tft > max_fifo_threshold) {
 		dev_warn(&adev->dev, "requested TX FIFO threshold %u, adjusted down to %u\n",
-			pdata->tft, max_fifo_threshold);
-		pdata->tft = max_fifo_threshold;
+			 dev->tft, max_fifo_threshold);
+		dev->tft = max_fifo_threshold;
 	}
 
-	if (pdata->rft > max_fifo_threshold) {
+	if (dev->rft > max_fifo_threshold) {
 		dev_warn(&adev->dev, "requested RX FIFO threshold %u, adjusted down to %u\n",
-			pdata->rft, max_fifo_threshold);
-		pdata->rft = max_fifo_threshold;
+			dev->rft, max_fifo_threshold);
+		dev->rft = max_fifo_threshold;
 	}
 
-	dev = kzalloc(sizeof(struct nmk_i2c_dev), GFP_KERNEL);
-	if (!dev) {
-		dev_err(&adev->dev, "cannot allocate memory\n");
-		ret = -ENOMEM;
-		goto err_no_mem;
-	}
-	dev->vendor = vendor;
-	dev->busy = false;
-	dev->adev = adev;
 	amba_set_drvdata(adev, dev);
 
-	/* Select default pin state */
-	pinctrl_pm_select_default_state(&adev->dev);
-	/* If possible, let's go to idle until the first transfer */
-	pinctrl_pm_select_idle_state(&adev->dev);
-
-	dev->virtbase = ioremap(adev->res.start, resource_size(&adev->res));
-	if (!dev->virtbase) {
+	dev->virtbase = devm_ioremap(&adev->dev, adev->res.start,
+				resource_size(&adev->res));
+	if (IS_ERR(dev->virtbase)) {
 		ret = -ENOMEM;
-		goto err_no_ioremap;
+		goto err_no_mem;
 	}
 
 	dev->irq = adev->irq[0];
-	ret = request_irq(dev->irq, i2c_irq_handler, 0,
+	ret = devm_request_irq(&adev->dev, dev->irq, i2c_irq_handler, 0,
 				DRIVER_NAME, dev);
 	if (ret) {
 		dev_err(&adev->dev, "cannot claim the irq %d\n", dev->irq);
-		goto err_irq;
+		goto err_no_mem;
 	}
 
 	pm_suspend_ignore_children(&adev->dev, true);
 
-	dev->clk = clk_get(&adev->dev, NULL);
+	dev->clk = devm_clk_get(&adev->dev, NULL);
 	if (IS_ERR(dev->clk)) {
 		dev_err(&adev->dev, "could not get i2c clock\n");
 		ret = PTR_ERR(dev->clk);
-		goto err_no_clk;
+		goto err_no_mem;
+	}
+
+	ret = clk_prepare_enable(dev->clk);
+	if (ret) {
+		dev_err(&adev->dev, "can't prepare_enable clock\n");
+		goto err_no_mem;
 	}
 
+	init_hw(dev);
+
 	adap = &dev->adap;
 	adap->dev.of_node = np;
 	adap->dev.parent = &adev->dev;
 	adap->owner	= THIS_MODULE;
-	adap->class	= I2C_CLASS_HWMON | I2C_CLASS_SPD;
+	adap->class	= I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED;
 	adap->algo	= &nmk_i2c_algo;
-	adap->timeout	= msecs_to_jiffies(pdata->timeout);
+	adap->timeout	= msecs_to_jiffies(dev->timeout);
 	snprintf(adap->name, sizeof(adap->name),
 		 "Nomadik I2C at %pR", &adev->res);
 
-	/* fetch the controller configuration from machine */
-	dev->cfg.clk_freq = pdata->clk_freq;
-	dev->cfg.tft	= pdata->tft;
-	dev->cfg.rft	= pdata->rft;
-	dev->cfg.sm	= pdata->sm;
-
 	i2c_set_adapdata(adap, dev);
 
 	dev_info(&adev->dev,
@@ -1079,21 +1048,15 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 	ret = i2c_add_adapter(adap);
 	if (ret) {
 		dev_err(&adev->dev, "failed to add adapter\n");
-		goto err_add_adap;
+		goto err_no_adap;
 	}
 
 	pm_runtime_put(&adev->dev);
 
 	return 0;
 
- err_add_adap:
-	clk_put(dev->clk);
- err_no_clk:
-	free_irq(dev->irq, dev);
- err_irq:
-	iounmap(dev->virtbase);
- err_no_ioremap:
-	kfree(dev);
+ err_no_adap:
+	clk_disable_unprepare(dev->clk);
  err_no_mem:
 
 	return ret;
@@ -1110,13 +1073,9 @@ static int nmk_i2c_remove(struct amba_device *adev)
 	clear_all_interrupts(dev);
 	/* disable the controller */
 	i2c_clr_bit(dev->virtbase + I2C_CR, I2C_CR_PE);
-	free_irq(dev->irq, dev);
-	iounmap(dev->virtbase);
+	clk_disable_unprepare(dev->clk);
 	if (res)
 		release_mem_region(res->start, resource_size(res));
-	clk_put(dev->clk);
-	pm_runtime_disable(&adev->dev);
-	kfree(dev);
 
 	return 0;
 }
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 80e06fa45720..1f6369f14fb6 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -246,7 +246,7 @@ static const struct i2c_algorithm ocores_algorithm = {
 static struct i2c_adapter ocores_adapter = {
 	.owner		= THIS_MODULE,
 	.name		= "i2c-ocores",
-	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED,
 	.algo		= &ocores_algorithm,
 };
 
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 90dcc2eaac5f..85f8eac9ba18 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -636,7 +636,7 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	int r;
 
 	r = pm_runtime_get_sync(dev->dev);
-	if (IS_ERR_VALUE(r))
+	if (r < 0)
 		goto out;
 
 	r = omap_i2c_wait_for_bb(dev);
@@ -1155,7 +1155,7 @@ omap_i2c_probe(struct platform_device *pdev)
 	pm_runtime_use_autosuspend(dev->dev);
 
 	r = pm_runtime_get_sync(dev->dev);
-	if (IS_ERR_VALUE(r))
+	if (r < 0)
 		goto err_free_mem;
 
 	/*
@@ -1238,7 +1238,7 @@ omap_i2c_probe(struct platform_device *pdev)
 	adap = &dev->adapter;
 	i2c_set_adapdata(adap, dev);
 	adap->owner = THIS_MODULE;
-	adap->class = I2C_CLASS_HWMON;
+	adap->class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED;
 	strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
 	adap->algo = &omap_i2c_algo;
 	adap->dev.parent = &pdev->dev;
@@ -1276,7 +1276,7 @@ static int omap_i2c_remove(struct platform_device *pdev)
 
 	i2c_del_adapter(&dev->adapter);
 	ret = pm_runtime_get_sync(&pdev->dev);
-	if (IS_ERR_VALUE(ret))
+	if (ret < 0)
 		return ret;
 
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c
index 615f632c846f..7a9dce43e115 100644
--- a/drivers/i2c/busses/i2c-pasemi.c
+++ b/drivers/i2c/busses/i2c-pasemi.c
@@ -401,7 +401,7 @@ static void pasemi_smb_remove(struct pci_dev *dev)
 	kfree(smbus);
 }
 
-static DEFINE_PCI_DEVICE_TABLE(pasemi_smb_ids) = {
+static const struct pci_device_id pasemi_smb_ids[] = {
 	{ PCI_DEVICE(0x1959, 0xa003) },
 	{ 0, }
 };
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 39dd8ec60dfd..a6f54ba27e2a 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -540,7 +540,7 @@ static const struct i2c_algorithm smbus_algorithm = {
 	.functionality	= piix4_func,
 };
 
-static DEFINE_PCI_DEVICE_TABLE(piix4_ids) = {
+static const struct pci_device_id piix4_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3) },
diff --git a/drivers/i2c/busses/i2c-pxa-pci.c b/drivers/i2c/busses/i2c-pxa-pci.c
index 9639be86e53f..417464e9ea2a 100644
--- a/drivers/i2c/busses/i2c-pxa-pci.c
+++ b/drivers/i2c/busses/i2c-pxa-pci.c
@@ -148,7 +148,7 @@ static void ce4100_i2c_remove(struct pci_dev *dev)
 	kfree(sds);
 }
 
-static DEFINE_PCI_DEVICE_TABLE(ce4100_i2c_devices) = {
+static const struct pci_device_id ce4100_i2c_devices[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e68)},
 	{ },
 };
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
new file mode 100644
index 000000000000..1b4cf14f1106
--- /dev/null
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -0,0 +1,768 @@
+/*
+ * Copyright (c) 2009-2013, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2014, Sony Mobile Communications AB.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+/* QUP Registers */
+#define QUP_CONFIG		0x000
+#define QUP_STATE		0x004
+#define QUP_IO_MODE		0x008
+#define QUP_SW_RESET		0x00c
+#define QUP_OPERATIONAL		0x018
+#define QUP_ERROR_FLAGS		0x01c
+#define QUP_ERROR_FLAGS_EN	0x020
+#define QUP_HW_VERSION		0x030
+#define QUP_MX_OUTPUT_CNT	0x100
+#define QUP_OUT_FIFO_BASE	0x110
+#define QUP_MX_WRITE_CNT	0x150
+#define QUP_MX_INPUT_CNT	0x200
+#define QUP_MX_READ_CNT		0x208
+#define QUP_IN_FIFO_BASE	0x218
+#define QUP_I2C_CLK_CTL		0x400
+#define QUP_I2C_STATUS		0x404
+
+/* QUP States and reset values */
+#define QUP_RESET_STATE		0
+#define QUP_RUN_STATE		1
+#define QUP_PAUSE_STATE		3
+#define QUP_STATE_MASK		3
+
+#define QUP_STATE_VALID		BIT(2)
+#define QUP_I2C_MAST_GEN	BIT(4)
+
+#define QUP_OPERATIONAL_RESET	0x000ff0
+#define QUP_I2C_STATUS_RESET	0xfffffc
+
+/* QUP OPERATIONAL FLAGS */
+#define QUP_I2C_NACK_FLAG	BIT(3)
+#define QUP_OUT_NOT_EMPTY	BIT(4)
+#define QUP_IN_NOT_EMPTY	BIT(5)
+#define QUP_OUT_FULL		BIT(6)
+#define QUP_OUT_SVC_FLAG	BIT(8)
+#define QUP_IN_SVC_FLAG		BIT(9)
+#define QUP_MX_OUTPUT_DONE	BIT(10)
+#define QUP_MX_INPUT_DONE	BIT(11)
+
+/* I2C mini core related values */
+#define QUP_CLOCK_AUTO_GATE	BIT(13)
+#define I2C_MINI_CORE		(2 << 8)
+#define I2C_N_VAL		15
+/* Most significant word offset in FIFO port */
+#define QUP_MSW_SHIFT		(I2C_N_VAL + 1)
+
+/* Packing/Unpacking words in FIFOs, and IO modes */
+#define QUP_OUTPUT_BLK_MODE	(1 << 10)
+#define QUP_INPUT_BLK_MODE	(1 << 12)
+#define QUP_UNPACK_EN		BIT(14)
+#define QUP_PACK_EN		BIT(15)
+
+#define QUP_REPACK_EN		(QUP_UNPACK_EN | QUP_PACK_EN)
+
+#define QUP_OUTPUT_BLOCK_SIZE(x)(((x) >> 0) & 0x03)
+#define QUP_OUTPUT_FIFO_SIZE(x)	(((x) >> 2) & 0x07)
+#define QUP_INPUT_BLOCK_SIZE(x)	(((x) >> 5) & 0x03)
+#define QUP_INPUT_FIFO_SIZE(x)	(((x) >> 7) & 0x07)
+
+/* QUP tags */
+#define QUP_TAG_START		(1 << 8)
+#define QUP_TAG_DATA		(2 << 8)
+#define QUP_TAG_STOP		(3 << 8)
+#define QUP_TAG_REC		(4 << 8)
+
+/* Status, Error flags */
+#define I2C_STATUS_WR_BUFFER_FULL	BIT(0)
+#define I2C_STATUS_BUS_ACTIVE		BIT(8)
+#define I2C_STATUS_ERROR_MASK		0x38000fc
+#define QUP_STATUS_ERROR_FLAGS		0x7c
+
+#define QUP_READ_LIMIT			256
+
+struct qup_i2c_dev {
+	struct device		*dev;
+	void __iomem		*base;
+	int			irq;
+	struct clk		*clk;
+	struct clk		*pclk;
+	struct i2c_adapter	adap;
+
+	int			clk_ctl;
+	int			out_fifo_sz;
+	int			in_fifo_sz;
+	int			out_blk_sz;
+	int			in_blk_sz;
+
+	unsigned long		one_byte_t;
+
+	struct i2c_msg		*msg;
+	/* Current posion in user message buffer */
+	int			pos;
+	/* I2C protocol errors */
+	u32			bus_err;
+	/* QUP core errors */
+	u32			qup_err;
+
+	struct completion	xfer;
+};
+
+static irqreturn_t qup_i2c_interrupt(int irq, void *dev)
+{
+	struct qup_i2c_dev *qup = dev;
+	u32 bus_err;
+	u32 qup_err;
+	u32 opflags;
+
+	bus_err = readl(qup->base + QUP_I2C_STATUS);
+	qup_err = readl(qup->base + QUP_ERROR_FLAGS);
+	opflags = readl(qup->base + QUP_OPERATIONAL);
+
+	if (!qup->msg) {
+		/* Clear Error interrupt */
+		writel(QUP_RESET_STATE, qup->base + QUP_STATE);
+		return IRQ_HANDLED;
+	}
+
+	bus_err &= I2C_STATUS_ERROR_MASK;
+	qup_err &= QUP_STATUS_ERROR_FLAGS;
+
+	if (qup_err) {
+		/* Clear Error interrupt */
+		writel(qup_err, qup->base + QUP_ERROR_FLAGS);
+		goto done;
+	}
+
+	if (bus_err) {
+		/* Clear Error interrupt */
+		writel(QUP_RESET_STATE, qup->base + QUP_STATE);
+		goto done;
+	}
+
+	if (opflags & QUP_IN_SVC_FLAG)
+		writel(QUP_IN_SVC_FLAG, qup->base + QUP_OPERATIONAL);
+
+	if (opflags & QUP_OUT_SVC_FLAG)
+		writel(QUP_OUT_SVC_FLAG, qup->base + QUP_OPERATIONAL);
+
+done:
+	qup->qup_err = qup_err;
+	qup->bus_err = bus_err;
+	complete(&qup->xfer);
+	return IRQ_HANDLED;
+}
+
+static int qup_i2c_poll_state_mask(struct qup_i2c_dev *qup,
+				   u32 req_state, u32 req_mask)
+{
+	int retries = 1;
+	u32 state;
+
+	/*
+	 * State transition takes 3 AHB clocks cycles + 3 I2C master clock
+	 * cycles. So retry once after a 1uS delay.
+	 */
+	do {
+		state = readl(qup->base + QUP_STATE);
+
+		if (state & QUP_STATE_VALID &&
+		    (state & req_mask) == req_state)
+			return 0;
+
+		udelay(1);
+	} while (retries--);
+
+	return -ETIMEDOUT;
+}
+
+static int qup_i2c_poll_state(struct qup_i2c_dev *qup, u32 req_state)
+{
+	return qup_i2c_poll_state_mask(qup, req_state, QUP_STATE_MASK);
+}
+
+static int qup_i2c_poll_state_valid(struct qup_i2c_dev *qup)
+{
+	return qup_i2c_poll_state_mask(qup, 0, 0);
+}
+
+static int qup_i2c_poll_state_i2c_master(struct qup_i2c_dev *qup)
+{
+	return qup_i2c_poll_state_mask(qup, QUP_I2C_MAST_GEN, QUP_I2C_MAST_GEN);
+}
+
+static int qup_i2c_change_state(struct qup_i2c_dev *qup, u32 state)
+{
+	if (qup_i2c_poll_state_valid(qup) != 0)
+		return -EIO;
+
+	writel(state, qup->base + QUP_STATE);
+
+	if (qup_i2c_poll_state(qup, state) != 0)
+		return -EIO;
+	return 0;
+}
+
+static int qup_i2c_wait_writeready(struct qup_i2c_dev *qup)
+{
+	unsigned long timeout;
+	u32 opflags;
+	u32 status;
+
+	timeout = jiffies + HZ;
+
+	for (;;) {
+		opflags = readl(qup->base + QUP_OPERATIONAL);
+		status = readl(qup->base + QUP_I2C_STATUS);
+
+		if (!(opflags & QUP_OUT_NOT_EMPTY) &&
+		    !(status & I2C_STATUS_BUS_ACTIVE))
+			return 0;
+
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+
+		usleep_range(qup->one_byte_t, qup->one_byte_t * 2);
+	}
+}
+
+static void qup_i2c_set_write_mode(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+	/* Number of entries to shift out, including the start */
+	int total = msg->len + 1;
+
+	if (total < qup->out_fifo_sz) {
+		/* FIFO mode */
+		writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE);
+		writel(total, qup->base + QUP_MX_WRITE_CNT);
+	} else {
+		/* BLOCK mode (transfer data on chunks) */
+		writel(QUP_OUTPUT_BLK_MODE | QUP_REPACK_EN,
+		       qup->base + QUP_IO_MODE);
+		writel(total, qup->base + QUP_MX_OUTPUT_CNT);
+	}
+}
+
+static void qup_i2c_issue_write(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+	u32 addr = msg->addr << 1;
+	u32 qup_tag;
+	u32 opflags;
+	int idx;
+	u32 val;
+
+	if (qup->pos == 0) {
+		val = QUP_TAG_START | addr;
+		idx = 1;
+	} else {
+		val = 0;
+		idx = 0;
+	}
+
+	while (qup->pos < msg->len) {
+		/* Check that there's space in the FIFO for our pair */
+		opflags = readl(qup->base + QUP_OPERATIONAL);
+		if (opflags & QUP_OUT_FULL)
+			break;
+
+		if (qup->pos == msg->len - 1)
+			qup_tag = QUP_TAG_STOP;
+		else
+			qup_tag = QUP_TAG_DATA;
+
+		if (idx & 1)
+			val |= (qup_tag | msg->buf[qup->pos]) << QUP_MSW_SHIFT;
+		else
+			val = qup_tag | msg->buf[qup->pos];
+
+		/* Write out the pair and the last odd value */
+		if (idx & 1 || qup->pos == msg->len - 1)
+			writel(val, qup->base + QUP_OUT_FIFO_BASE);
+
+		qup->pos++;
+		idx++;
+	}
+}
+
+static int qup_i2c_write_one(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+	unsigned long left;
+	int ret;
+
+	qup->msg = msg;
+	qup->pos = 0;
+
+	enable_irq(qup->irq);
+
+	qup_i2c_set_write_mode(qup, msg);
+
+	ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+	if (ret)
+		goto err;
+
+	writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
+
+	do {
+		ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE);
+		if (ret)
+			goto err;
+
+		qup_i2c_issue_write(qup, msg);
+
+		ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+		if (ret)
+			goto err;
+
+		left = wait_for_completion_timeout(&qup->xfer, HZ);
+		if (!left) {
+			writel(1, qup->base + QUP_SW_RESET);
+			ret = -ETIMEDOUT;
+			goto err;
+		}
+
+		if (qup->bus_err || qup->qup_err) {
+			if (qup->bus_err & QUP_I2C_NACK_FLAG)
+				dev_err(qup->dev, "NACK from %x\n", msg->addr);
+			ret = -EIO;
+			goto err;
+		}
+	} while (qup->pos < msg->len);
+
+	/* Wait for the outstanding data in the fifo to drain */
+	ret = qup_i2c_wait_writeready(qup);
+
+err:
+	disable_irq(qup->irq);
+	qup->msg = NULL;
+
+	return ret;
+}
+
+static void qup_i2c_set_read_mode(struct qup_i2c_dev *qup, int len)
+{
+	if (len < qup->in_fifo_sz) {
+		/* FIFO mode */
+		writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE);
+		writel(len, qup->base + QUP_MX_READ_CNT);
+	} else {
+		/* BLOCK mode (transfer data on chunks) */
+		writel(QUP_INPUT_BLK_MODE | QUP_REPACK_EN,
+		       qup->base + QUP_IO_MODE);
+		writel(len, qup->base + QUP_MX_INPUT_CNT);
+	}
+}
+
+static void qup_i2c_issue_read(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+	u32 addr, len, val;
+
+	addr = (msg->addr << 1) | 1;
+
+	/* 0 is used to specify a length 256 (QUP_READ_LIMIT) */
+	len = (msg->len == QUP_READ_LIMIT) ? 0 : msg->len;
+
+	val = ((QUP_TAG_REC | len) << QUP_MSW_SHIFT) | QUP_TAG_START | addr;
+	writel(val, qup->base + QUP_OUT_FIFO_BASE);
+}
+
+
+static void qup_i2c_read_fifo(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+	u32 opflags;
+	u32 val = 0;
+	int idx;
+
+	for (idx = 0; qup->pos < msg->len; idx++) {
+		if ((idx & 1) == 0) {
+			/* Check that FIFO have data */
+			opflags = readl(qup->base + QUP_OPERATIONAL);
+			if (!(opflags & QUP_IN_NOT_EMPTY))
+				break;
+
+			/* Reading 2 words at time */
+			val = readl(qup->base + QUP_IN_FIFO_BASE);
+
+			msg->buf[qup->pos++] = val & 0xFF;
+		} else {
+			msg->buf[qup->pos++] = val >> QUP_MSW_SHIFT;
+		}
+	}
+}
+
+static int qup_i2c_read_one(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+	unsigned long left;
+	int ret;
+
+	/*
+	 * The QUP block will issue a NACK and STOP on the bus when reaching
+	 * the end of the read, the length of the read is specified as one byte
+	 * which limits the possible read to 256 (QUP_READ_LIMIT) bytes.
+	 */
+	if (msg->len > QUP_READ_LIMIT) {
+		dev_err(qup->dev, "HW not capable of reads over %d bytes\n",
+			QUP_READ_LIMIT);
+		return -EINVAL;
+	}
+
+	qup->msg = msg;
+	qup->pos  = 0;
+
+	enable_irq(qup->irq);
+
+	qup_i2c_set_read_mode(qup, msg->len);
+
+	ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+	if (ret)
+		goto err;
+
+	writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
+
+	ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE);
+	if (ret)
+		goto err;
+
+	qup_i2c_issue_read(qup, msg);
+
+	ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+	if (ret)
+		goto err;
+
+	do {
+		left = wait_for_completion_timeout(&qup->xfer, HZ);
+		if (!left) {
+			writel(1, qup->base + QUP_SW_RESET);
+			ret = -ETIMEDOUT;
+			goto err;
+		}
+
+		if (qup->bus_err || qup->qup_err) {
+			if (qup->bus_err & QUP_I2C_NACK_FLAG)
+				dev_err(qup->dev, "NACK from %x\n", msg->addr);
+			ret = -EIO;
+			goto err;
+		}
+
+		qup_i2c_read_fifo(qup, msg);
+	} while (qup->pos < msg->len);
+
+err:
+	disable_irq(qup->irq);
+	qup->msg = NULL;
+
+	return ret;
+}
+
+static int qup_i2c_xfer(struct i2c_adapter *adap,
+			struct i2c_msg msgs[],
+			int num)
+{
+	struct qup_i2c_dev *qup = i2c_get_adapdata(adap);
+	int ret, idx;
+
+	ret = pm_runtime_get_sync(qup->dev);
+	if (ret)
+		goto out;
+
+	writel(1, qup->base + QUP_SW_RESET);
+	ret = qup_i2c_poll_state(qup, QUP_RESET_STATE);
+	if (ret)
+		goto out;
+
+	/* Configure QUP as I2C mini core */
+	writel(I2C_MINI_CORE | I2C_N_VAL, qup->base + QUP_CONFIG);
+
+	for (idx = 0; idx < num; idx++) {
+		if (msgs[idx].len == 0) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (qup_i2c_poll_state_i2c_master(qup)) {
+			ret = -EIO;
+			goto out;
+		}
+
+		if (msgs[idx].flags & I2C_M_RD)
+			ret = qup_i2c_read_one(qup, &msgs[idx]);
+		else
+			ret = qup_i2c_write_one(qup, &msgs[idx]);
+
+		if (ret)
+			break;
+
+		ret = qup_i2c_change_state(qup, QUP_RESET_STATE);
+		if (ret)
+			break;
+	}
+
+	if (ret == 0)
+		ret = num;
+out:
+
+	pm_runtime_mark_last_busy(qup->dev);
+	pm_runtime_put_autosuspend(qup->dev);
+
+	return ret;
+}
+
+static u32 qup_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+}
+
+static const struct i2c_algorithm qup_i2c_algo = {
+	.master_xfer	= qup_i2c_xfer,
+	.functionality	= qup_i2c_func,
+};
+
+static void qup_i2c_enable_clocks(struct qup_i2c_dev *qup)
+{
+	clk_prepare_enable(qup->clk);
+	clk_prepare_enable(qup->pclk);
+}
+
+static void qup_i2c_disable_clocks(struct qup_i2c_dev *qup)
+{
+	u32 config;
+
+	qup_i2c_change_state(qup, QUP_RESET_STATE);
+	clk_disable_unprepare(qup->clk);
+	config = readl(qup->base + QUP_CONFIG);
+	config |= QUP_CLOCK_AUTO_GATE;
+	writel(config, qup->base + QUP_CONFIG);
+	clk_disable_unprepare(qup->pclk);
+}
+
+static int qup_i2c_probe(struct platform_device *pdev)
+{
+	static const int blk_sizes[] = {4, 16, 32};
+	struct device_node *node = pdev->dev.of_node;
+	struct qup_i2c_dev *qup;
+	unsigned long one_bit_t;
+	struct resource *res;
+	u32 io_mode, hw_ver, size;
+	int ret, fs_div, hs_div;
+	int src_clk_freq;
+	u32 clk_freq = 100000;
+
+	qup = devm_kzalloc(&pdev->dev, sizeof(*qup), GFP_KERNEL);
+	if (!qup)
+		return -ENOMEM;
+
+	qup->dev = &pdev->dev;
+	init_completion(&qup->xfer);
+	platform_set_drvdata(pdev, qup);
+
+	of_property_read_u32(node, "clock-frequency", &clk_freq);
+
+	/* We support frequencies up to FAST Mode (400KHz) */
+	if (!clk_freq || clk_freq > 400000) {
+		dev_err(qup->dev, "clock frequency not supported %d\n",
+			clk_freq);
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	qup->base = devm_ioremap_resource(qup->dev, res);
+	if (IS_ERR(qup->base))
+		return PTR_ERR(qup->base);
+
+	qup->irq = platform_get_irq(pdev, 0);
+	if (qup->irq < 0) {
+		dev_err(qup->dev, "No IRQ defined\n");
+		return qup->irq;
+	}
+
+	qup->clk = devm_clk_get(qup->dev, "core");
+	if (IS_ERR(qup->clk)) {
+		dev_err(qup->dev, "Could not get core clock\n");
+		return PTR_ERR(qup->clk);
+	}
+
+	qup->pclk = devm_clk_get(qup->dev, "iface");
+	if (IS_ERR(qup->pclk)) {
+		dev_err(qup->dev, "Could not get iface clock\n");
+		return PTR_ERR(qup->pclk);
+	}
+
+	qup_i2c_enable_clocks(qup);
+
+	/*
+	 * Bootloaders might leave a pending interrupt on certain QUP's,
+	 * so we reset the core before registering for interrupts.
+	 */
+	writel(1, qup->base + QUP_SW_RESET);
+	ret = qup_i2c_poll_state_valid(qup);
+	if (ret)
+		goto fail;
+
+	ret = devm_request_irq(qup->dev, qup->irq, qup_i2c_interrupt,
+			       IRQF_TRIGGER_HIGH, "i2c_qup", qup);
+	if (ret) {
+		dev_err(qup->dev, "Request %d IRQ failed\n", qup->irq);
+		goto fail;
+	}
+	disable_irq(qup->irq);
+
+	hw_ver = readl(qup->base + QUP_HW_VERSION);
+	dev_dbg(qup->dev, "Revision %x\n", hw_ver);
+
+	io_mode = readl(qup->base + QUP_IO_MODE);
+
+	/*
+	 * The block/fifo size w.r.t. 'actual data' is 1/2 due to 'tag'
+	 * associated with each byte written/received
+	 */
+	size = QUP_OUTPUT_BLOCK_SIZE(io_mode);
+	if (size >= ARRAY_SIZE(blk_sizes))
+		return -EIO;
+	qup->out_blk_sz = blk_sizes[size] / 2;
+
+	size = QUP_INPUT_BLOCK_SIZE(io_mode);
+	if (size >= ARRAY_SIZE(blk_sizes))
+		return -EIO;
+	qup->in_blk_sz = blk_sizes[size] / 2;
+
+	size = QUP_OUTPUT_FIFO_SIZE(io_mode);
+	qup->out_fifo_sz = qup->out_blk_sz * (2 << size);
+
+	size = QUP_INPUT_FIFO_SIZE(io_mode);
+	qup->in_fifo_sz = qup->in_blk_sz * (2 << size);
+
+	src_clk_freq = clk_get_rate(qup->clk);
+	fs_div = ((src_clk_freq / clk_freq) / 2) - 3;
+	hs_div = 3;
+	qup->clk_ctl = (hs_div << 8) | (fs_div & 0xff);
+
+	/*
+	 * Time it takes for a byte to be clocked out on the bus.
+	 * Each byte takes 9 clock cycles (8 bits + 1 ack).
+	 */
+	one_bit_t = (USEC_PER_SEC / clk_freq) + 1;
+	qup->one_byte_t = one_bit_t * 9;
+
+	dev_dbg(qup->dev, "IN:block:%d, fifo:%d, OUT:block:%d, fifo:%d\n",
+		qup->in_blk_sz, qup->in_fifo_sz,
+		qup->out_blk_sz, qup->out_fifo_sz);
+
+	i2c_set_adapdata(&qup->adap, qup);
+	qup->adap.algo = &qup_i2c_algo;
+	qup->adap.dev.parent = qup->dev;
+	qup->adap.dev.of_node = pdev->dev.of_node;
+	strlcpy(qup->adap.name, "QUP I2C adapter", sizeof(qup->adap.name));
+
+	ret = i2c_add_adapter(&qup->adap);
+	if (ret)
+		goto fail;
+
+	pm_runtime_set_autosuspend_delay(qup->dev, MSEC_PER_SEC);
+	pm_runtime_use_autosuspend(qup->dev);
+	pm_runtime_set_active(qup->dev);
+	pm_runtime_enable(qup->dev);
+	return 0;
+
+fail:
+	qup_i2c_disable_clocks(qup);
+	return ret;
+}
+
+static int qup_i2c_remove(struct platform_device *pdev)
+{
+	struct qup_i2c_dev *qup = platform_get_drvdata(pdev);
+
+	disable_irq(qup->irq);
+	qup_i2c_disable_clocks(qup);
+	i2c_del_adapter(&qup->adap);
+	pm_runtime_disable(qup->dev);
+	pm_runtime_set_suspended(qup->dev);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int qup_i2c_pm_suspend_runtime(struct device *device)
+{
+	struct qup_i2c_dev *qup = dev_get_drvdata(device);
+
+	dev_dbg(device, "pm_runtime: suspending...\n");
+	qup_i2c_disable_clocks(qup);
+	return 0;
+}
+
+static int qup_i2c_pm_resume_runtime(struct device *device)
+{
+	struct qup_i2c_dev *qup = dev_get_drvdata(device);
+
+	dev_dbg(device, "pm_runtime: resuming...\n");
+	qup_i2c_enable_clocks(qup);
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static int qup_i2c_suspend(struct device *device)
+{
+	qup_i2c_pm_suspend_runtime(device);
+	return 0;
+}
+
+static int qup_i2c_resume(struct device *device)
+{
+	qup_i2c_pm_resume_runtime(device);
+	pm_runtime_mark_last_busy(device);
+	pm_request_autosuspend(device);
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops qup_i2c_qup_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(
+		qup_i2c_suspend,
+		qup_i2c_resume)
+	SET_RUNTIME_PM_OPS(
+		qup_i2c_pm_suspend_runtime,
+		qup_i2c_pm_resume_runtime,
+		NULL)
+};
+
+static const struct of_device_id qup_i2c_dt_match[] = {
+	{ .compatible = "qcom,i2c-qup-v1.1.1" },
+	{ .compatible = "qcom,i2c-qup-v2.1.1" },
+	{ .compatible = "qcom,i2c-qup-v2.2.1" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, qup_i2c_dt_match);
+
+static struct platform_driver qup_i2c_driver = {
+	.probe  = qup_i2c_probe,
+	.remove = qup_i2c_remove,
+	.driver = {
+		.name = "i2c_qup",
+		.owner = THIS_MODULE,
+		.pm = &qup_i2c_qup_pm_ops,
+		.of_match_table = qup_i2c_dt_match,
+	},
+};
+
+module_platform_driver(qup_i2c_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:i2c_qup");
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 0282d4d42805..d4fa8eba6e9d 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -638,6 +638,7 @@ static const struct of_device_id rcar_i2c_dt_ids[] = {
 	{ .compatible = "renesas,i2c-r8a7778", .data = (void *)I2C_RCAR_GEN1 },
 	{ .compatible = "renesas,i2c-r8a7779", .data = (void *)I2C_RCAR_GEN1 },
 	{ .compatible = "renesas,i2c-r8a7790", .data = (void *)I2C_RCAR_GEN2 },
+	{ .compatible = "renesas,i2c-r8a7791", .data = (void *)I2C_RCAR_GEN2 },
 	{},
 };
 MODULE_DEVICE_TABLE(of, rcar_i2c_dt_ids);
@@ -691,7 +692,7 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 	adap			= &priv->adap;
 	adap->nr		= pdev->id;
 	adap->algo		= &rcar_i2c_algo;
-	adap->class		= I2C_CLASS_HWMON | I2C_CLASS_SPD;
+	adap->class		= I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED;
 	adap->retries		= 3;
 	adap->dev.parent	= dev;
 	adap->dev.of_node	= dev->of_node;
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 684d21e71e4a..ae4491062e41 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -601,6 +601,31 @@ static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+/*
+ * Disable the bus so that we won't get any interrupts from now on, or try
+ * to drive any lines. This is the default state when we don't have
+ * anything to send/receive.
+ *
+ * If there is an event on the bus, or we have a pre-existing event at
+ * kernel boot time, we may not notice the event and the I2C controller
+ * will lock the bus with the I2C clock line low indefinitely.
+ */
+static inline void s3c24xx_i2c_disable_bus(struct s3c24xx_i2c *i2c)
+{
+	unsigned long tmp;
+
+	/* Stop driving the I2C pins */
+	tmp = readl(i2c->regs + S3C2410_IICSTAT);
+	tmp &= ~S3C2410_IICSTAT_TXRXEN;
+	writel(tmp, i2c->regs + S3C2410_IICSTAT);
+
+	/* We don't expect any interrupts now, and don't want send acks */
+	tmp = readl(i2c->regs + S3C2410_IICCON);
+	tmp &= ~(S3C2410_IICCON_IRQEN | S3C2410_IICCON_IRQPEND |
+		S3C2410_IICCON_ACKEN);
+	writel(tmp, i2c->regs + S3C2410_IICCON);
+}
+
 
 /* s3c24xx_i2c_set_master
  *
@@ -735,7 +760,11 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
 
 	s3c24xx_i2c_wait_idle(i2c);
 
+	s3c24xx_i2c_disable_bus(i2c);
+
  out:
+	i2c->state = STATE_IDLE;
+
 	return ret;
 }
 
@@ -1004,7 +1033,6 @@ static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
 
 static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
 {
-	unsigned long iicon = S3C2410_IICCON_IRQEN | S3C2410_IICCON_ACKEN;
 	struct s3c2410_platform_i2c *pdata;
 	unsigned int freq;
 
@@ -1018,12 +1046,12 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
 
 	dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr);
 
-	writel(iicon, i2c->regs + S3C2410_IICCON);
+	writel(0, i2c->regs + S3C2410_IICCON);
+	writel(0, i2c->regs + S3C2410_IICSTAT);
 
 	/* we need to work out the divisors for the clock... */
 
 	if (s3c24xx_i2c_clockrate(i2c, &freq) != 0) {
-		writel(0, i2c->regs + S3C2410_IICCON);
 		dev_err(i2c->dev, "cannot meet bus frequency required\n");
 		return -EINVAL;
 	}
@@ -1031,7 +1059,8 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
 	/* todo - check that the i2c lines aren't being dragged anywhere */
 
 	dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq);
-	dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02lx\n", iicon);
+	dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02x\n",
+		readl(i2c->regs + S3C2410_IICCON));
 
 	return 0;
 }
@@ -1106,7 +1135,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 	i2c->adap.owner   = THIS_MODULE;
 	i2c->adap.algo    = &s3c24xx_i2c_algorithm;
 	i2c->adap.retries = 2;
-	i2c->adap.class   = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+	i2c->adap.class   = I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED;
 	i2c->tx_setup     = 50;
 
 	init_waitqueue_head(&i2c->wait);
diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c
index 6784f7f527a4..8e3be7ed0586 100644
--- a/drivers/i2c/busses/i2c-sirf.c
+++ b/drivers/i2c/busses/i2c-sirf.c
@@ -312,7 +312,7 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev)
 		goto out;
 	}
 	adap = &siic->adapter;
-	adap->class = I2C_CLASS_HWMON;
+	adap->class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED;
 
 	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	siic->base = devm_ioremap_resource(&pdev->dev, mem_res);
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index 79fd96a04386..ac9bc33acef4 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -369,7 +369,7 @@ static struct i2c_adapter sis5595_adapter = {
 	.algo		= &smbus_algorithm,
 };
 
-static DEFINE_PCI_DEVICE_TABLE(sis5595_ids) = {
+static const struct pci_device_id sis5595_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) }, 
 	{ 0, }
 };
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 19b8505d0cdd..c6366733008d 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -510,7 +510,7 @@ static struct i2c_adapter sis630_adapter = {
 	.retries	= 3
 };
 
-static DEFINE_PCI_DEVICE_TABLE(sis630_ids) = {
+static const struct pci_device_id sis630_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_964) },
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index f8aa0c29f02b..8dc2fc5f74ff 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -244,7 +244,7 @@ static struct i2c_adapter sis96x_adapter = {
 	.algo		= &smbus_algorithm,
 };
 
-static DEFINE_PCI_DEVICE_TABLE(sis96x_ids) = {
+static const struct pci_device_id sis96x_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_SMBUS) },
 	{ 0, }
 };
diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
index 9cf715d69551..872016196ef3 100644
--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@@ -574,7 +574,7 @@ static irqreturn_t st_i2c_isr_thread(int irq, void *data)
 		writel_relaxed(it, i2c_dev->base + SSC_IEN);
 
 		st_i2c_set_bits(i2c_dev->base + SSC_I2C, SSC_I2C_STOPG);
-		c->result = -EIO;
+		c->result = -EAGAIN;
 		break;
 
 	default:
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 5b80ef310841..29b1fb778943 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -911,7 +911,7 @@ static int stu300_probe(struct platform_device *pdev)
 	adap = &dev->adapter;
 	adap->owner = THIS_MODULE;
 	/* DDC class but actually often used for more generic I2C */
-	adap->class = I2C_CLASS_DDC;
+	adap->class = I2C_CLASS_DDC | I2C_CLASS_DEPRECATED;
 	strlcpy(adap->name, "ST Microelectronics DDC I2C adapter",
 		sizeof(adap->name));
 	adap->nr = bus_nr;
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 9704537aee3c..00f04cb5b4eb 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -794,7 +794,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 
 	i2c_set_adapdata(&i2c_dev->adapter, i2c_dev);
 	i2c_dev->adapter.owner = THIS_MODULE;
-	i2c_dev->adapter.class = I2C_CLASS_HWMON;
+	i2c_dev->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED;
 	strlcpy(i2c_dev->adapter.name, "Tegra I2C adapter",
 		sizeof(i2c_dev->adapter.name));
 	i2c_dev->adapter.algo = &tegra_i2c_algo;
diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c
index 49d7f14b9d27..f4a1ed757612 100644
--- a/drivers/i2c/busses/i2c-via.c
+++ b/drivers/i2c/busses/i2c-via.c
@@ -88,7 +88,7 @@ static struct i2c_adapter vt586b_adapter = {
 };
 
 
-static DEFINE_PCI_DEVICE_TABLE(vt586b_ids) = {
+static const struct pci_device_id vt586b_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3) },
 	{ 0, }
 };
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 40d36df678de..6841200b6e50 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -442,7 +442,7 @@ release_region:
 	return error;
 }
 
-static DEFINE_PCI_DEVICE_TABLE(vt596_ids) = {
+static const struct pci_device_id vt596_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596_3),
 	  .driver_data = SMBBA1 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596B_3),
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 28107502517f..7731f1795869 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -684,7 +684,7 @@ static const struct i2c_algorithm xiic_algorithm = {
 static struct i2c_adapter xiic_adapter = {
 	.owner		= THIS_MODULE,
 	.name		= DRIVER_NAME,
-	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED,
 	.algo		= &xiic_algorithm,
 };
 
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index 2d1d2c5653fb..cb66f9586f76 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -556,7 +556,7 @@ static struct platform_driver scx200_pci_driver = {
 	.remove = scx200_remove,
 };
 
-static DEFINE_PCI_DEVICE_TABLE(scx200_isa) = {
+static const struct pci_device_id scx200_isa[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) },
 	{ 0, }
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 5fb80b8962a2..7c7f4b856bad 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -48,10 +48,13 @@
 #include <linux/rwsem.h>
 #include <linux/pm_runtime.h>
 #include <linux/acpi.h>
+#include <linux/jump_label.h>
 #include <asm/uaccess.h>
 
 #include "i2c-core.h"
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/i2c.h>
 
 /* core_lock protects i2c_adapter_idr, and guarantees
    that device detection, deletion of detected devices, and attach_adapter
@@ -62,6 +65,18 @@ static DEFINE_IDR(i2c_adapter_idr);
 static struct device_type i2c_client_type;
 static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver);
 
+static struct static_key i2c_trace_msg = STATIC_KEY_INIT_FALSE;
+
+void i2c_transfer_trace_reg(void)
+{
+	static_key_slow_inc(&i2c_trace_msg);
+}
+
+void i2c_transfer_trace_unreg(void)
+{
+	static_key_slow_dec(&i2c_trace_msg);
+}
+
 /* ------------------------------------------------------------------------- */
 
 static const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id,
@@ -1686,6 +1701,7 @@ static void __exit i2c_exit(void)
 	class_compat_unregister(i2c_adapter_compat_class);
 #endif
 	bus_unregister(&i2c_bus_type);
+	tracepoint_synchronize_unregister();
 }
 
 /* We must initialize early, because some subsystems register i2c drivers
@@ -1716,6 +1732,19 @@ int __i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 	unsigned long orig_jiffies;
 	int ret, try;
 
+	/* i2c_trace_msg gets enabled when tracepoint i2c_transfer gets
+	 * enabled.  This is an efficient way of keeping the for-loop from
+	 * being executed when not needed.
+	 */
+	if (static_key_false(&i2c_trace_msg)) {
+		int i;
+		for (i = 0; i < num; i++)
+			if (msgs[i].flags & I2C_M_RD)
+				trace_i2c_read(adap, &msgs[i], i);
+			else
+				trace_i2c_write(adap, &msgs[i], i);
+	}
+
 	/* Retry automatically on arbitration loss */
 	orig_jiffies = jiffies;
 	for (ret = 0, try = 0; try <= adap->retries; try++) {
@@ -1726,6 +1755,14 @@ int __i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 			break;
 	}
 
+	if (static_key_false(&i2c_trace_msg)) {
+		int i;
+		for (i = 0; i < ret; i++)
+			if (msgs[i].flags & I2C_M_RD)
+				trace_i2c_reply(adap, &msgs[i], i);
+		trace_i2c_result(adap, i, ret);
+	}
+
 	return ret;
 }
 EXPORT_SYMBOL(__i2c_transfer);
@@ -1941,6 +1978,13 @@ static int i2c_detect_address(struct i2c_client *temp_client,
 		struct i2c_client *client;
 
 		/* Detection succeeded, instantiate the device */
+		if (adapter->class & I2C_CLASS_DEPRECATED)
+			dev_warn(&adapter->dev,
+				"This adapter will soon drop class based instantiation of devices. "
+				"Please make sure client 0x%02x gets instantiated by other means. "
+				"Check 'Documentation/i2c/instantiating-devices' for details.\n",
+				info.addr);
+
 		dev_dbg(&adapter->dev, "Creating %s at 0x%02x\n",
 			info.type, info.addr);
 		client = i2c_new_device(adapter, &info);
@@ -2521,6 +2565,14 @@ s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
 	int try;
 	s32 res;
 
+	/* If enabled, the following two tracepoints are conditional on
+	 * read_write and protocol.
+	 */
+	trace_smbus_write(adapter, addr, flags, read_write,
+			  command, protocol, data);
+	trace_smbus_read(adapter, addr, flags, read_write,
+			 command, protocol);
+
 	flags &= I2C_M_TEN | I2C_CLIENT_PEC | I2C_CLIENT_SCCB;
 
 	if (adapter->algo->smbus_xfer) {
@@ -2541,15 +2593,24 @@ s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
 		i2c_unlock_adapter(adapter);
 
 		if (res != -EOPNOTSUPP || !adapter->algo->master_xfer)
-			return res;
+			goto trace;
 		/*
 		 * Fall back to i2c_smbus_xfer_emulated if the adapter doesn't
 		 * implement native support for the SMBus operation.
 		 */
 	}
 
-	return i2c_smbus_xfer_emulated(adapter, addr, flags, read_write,
-				       command, protocol, data);
+	res = i2c_smbus_xfer_emulated(adapter, addr, flags, read_write,
+				      command, protocol, data);
+
+trace:
+	/* If enabled, the reply tracepoint is conditional on read_write. */
+	trace_smbus_reply(adapter, addr, flags, read_write,
+			  command, protocol, data);
+	trace_smbus_result(adapter, addr, flags, read_write,
+			   command, protocol, res);
+
+	return res;
 }
 EXPORT_SYMBOL(i2c_smbus_xfer);
 
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index deddeb8c337c..b556e0ab946f 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -487,6 +487,7 @@ void i2c_unlock_adapter(struct i2c_adapter *);
 #define I2C_CLASS_HWMON		(1<<0)	/* lm_sensors, ... */
 #define I2C_CLASS_DDC		(1<<3)	/* DDC bus on graphics adapters */
 #define I2C_CLASS_SPD		(1<<7)	/* Memory modules */
+#define I2C_CLASS_DEPRECATED	(1<<8)	/* Warn users that adapter will stop using classes */
 
 /* Internal numbers to terminate lists */
 #define I2C_CLIENT_END		0xfffeU
diff --git a/include/linux/i2c/bfin_twi.h b/include/linux/i2c/bfin_twi.h
new file mode 100644
index 000000000000..135a4e0876ae
--- /dev/null
+++ b/include/linux/i2c/bfin_twi.h
@@ -0,0 +1,145 @@
+/*
+ * i2c-bfin-twi.h - interface to ADI TWI controller
+ *
+ * Copyright 2005-2014 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __I2C_BFIN_TWI_H__
+#define __I2C_BFIN_TWI_H__
+
+#include <linux/types.h>
+#include <linux/i2c.h>
+
+/*
+ * ADI twi registers layout
+ */
+struct bfin_twi_regs {
+	u16 clkdiv;
+	u16 dummy1;
+	u16 control;
+	u16 dummy2;
+	u16 slave_ctl;
+	u16 dummy3;
+	u16 slave_stat;
+	u16 dummy4;
+	u16 slave_addr;
+	u16 dummy5;
+	u16 master_ctl;
+	u16 dummy6;
+	u16 master_stat;
+	u16 dummy7;
+	u16 master_addr;
+	u16 dummy8;
+	u16 int_stat;
+	u16 dummy9;
+	u16 int_mask;
+	u16 dummy10;
+	u16 fifo_ctl;
+	u16 dummy11;
+	u16 fifo_stat;
+	u16 dummy12;
+	u32 __pad[20];
+	u16 xmt_data8;
+	u16 dummy13;
+	u16 xmt_data16;
+	u16 dummy14;
+	u16 rcv_data8;
+	u16 dummy15;
+	u16 rcv_data16;
+	u16 dummy16;
+};
+
+struct bfin_twi_iface {
+	int			irq;
+	spinlock_t		lock;
+	char			read_write;
+	u8			command;
+	u8			*transPtr;
+	int			readNum;
+	int			writeNum;
+	int			cur_mode;
+	int			manual_stop;
+	int			result;
+	struct i2c_adapter	adap;
+	struct completion	complete;
+	struct i2c_msg		*pmsg;
+	int			msg_num;
+	int			cur_msg;
+	u16			saved_clkdiv;
+	u16			saved_control;
+	struct bfin_twi_regs __iomem *regs_base;
+};
+
+/*  ********************  TWO-WIRE INTERFACE (TWI) MASKS  ********************/
+/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y);  ) */
+#define	CLKLOW(x)	((x) & 0xFF)	/* Periods Clock Is Held Low */
+#define CLKHI(y)	(((y)&0xFF)<<0x8) /* Periods Before New Clock Low */
+
+/* TWI_PRESCALE Masks */
+#define	PRESCALE	0x007F	/* SCLKs Per Internal Time Reference (10MHz) */
+#define	TWI_ENA		0x0080	/* TWI Enable */
+#define	SCCB		0x0200	/* SCCB Compatibility Enable */
+
+/* TWI_SLAVE_CTL Masks */
+#define	SEN		0x0001	/* Slave Enable */
+#define	SADD_LEN	0x0002	/* Slave Address Length */
+#define	STDVAL		0x0004	/* Slave Transmit Data Valid */
+#define	NAK		0x0008	/* NAK Generated At Conclusion Of Transfer */
+#define	GEN		0x0010	/* General Call Address Matching Enabled */
+
+/* TWI_SLAVE_STAT Masks	*/
+#define	SDIR		0x0001	/* Slave Transfer Direction (RX/TX*) */
+#define GCALL		0x0002	/* General Call Indicator */
+
+/* TWI_MASTER_CTL Masks	*/
+#define	MEN		0x0001	/* Master Mode Enable          */
+#define	MADD_LEN	0x0002	/* Master Address Length       */
+#define	MDIR		0x0004	/* Master Transmit Direction (RX/TX*) */
+#define	FAST		0x0008	/* Use Fast Mode Timing Specs  */
+#define	STOP		0x0010	/* Issue Stop Condition        */
+#define	RSTART		0x0020	/* Repeat Start or Stop* At End Of Transfer */
+#define	DCNT		0x3FC0	/* Data Bytes To Transfer      */
+#define	SDAOVR		0x4000	/* Serial Data Override        */
+#define	SCLOVR		0x8000	/* Serial Clock Override       */
+
+/* TWI_MASTER_STAT Masks */
+#define	MPROG		0x0001	/* Master Transfer In Progress */
+#define	LOSTARB		0x0002	/* Lost Arbitration Indicator (Xfer Aborted) */
+#define	ANAK		0x0004	/* Address Not Acknowledged    */
+#define	DNAK		0x0008	/* Data Not Acknowledged       */
+#define	BUFRDERR	0x0010	/* Buffer Read Error           */
+#define	BUFWRERR	0x0020	/* Buffer Write Error          */
+#define	SDASEN		0x0040	/* Serial Data Sense           */
+#define	SCLSEN		0x0080	/* Serial Clock Sense          */
+#define	BUSBUSY		0x0100	/* Bus Busy Indicator          */
+
+/* TWI_INT_SRC and TWI_INT_ENABLE Masks	*/
+#define	SINIT		0x0001	/* Slave Transfer Initiated    */
+#define	SCOMP		0x0002	/* Slave Transfer Complete     */
+#define	SERR		0x0004	/* Slave Transfer Error        */
+#define	SOVF		0x0008	/* Slave Overflow              */
+#define	MCOMP		0x0010	/* Master Transfer Complete    */
+#define	MERR		0x0020	/* Master Transfer Error       */
+#define	XMTSERV		0x0040	/* Transmit FIFO Service       */
+#define	RCVSERV		0x0080	/* Receive FIFO Service        */
+
+/* TWI_FIFO_CTRL Masks */
+#define	XMTFLUSH	0x0001	/* Transmit Buffer Flush                 */
+#define	RCVFLUSH	0x0002	/* Receive Buffer Flush                  */
+#define	XMTINTLEN	0x0004	/* Transmit Buffer Interrupt Length      */
+#define	RCVINTLEN	0x0008	/* Receive Buffer Interrupt Length       */
+
+/* TWI_FIFO_STAT Masks */
+#define	XMTSTAT		0x0003	/* Transmit FIFO Status                  */
+#define	XMT_EMPTY	0x0000	/* Transmit FIFO Empty                   */
+#define	XMT_HALF	0x0001	/* Transmit FIFO Has 1 Byte To Write     */
+#define	XMT_FULL	0x0003	/* Transmit FIFO Full (2 Bytes To Write) */
+
+#define	RCVSTAT		0x000C	/* Receive FIFO Status                   */
+#define	RCV_EMPTY	0x0000	/* Receive FIFO Empty                    */
+#define	RCV_HALF	0x0004	/* Receive FIFO Has 1 Byte To Read       */
+#define	RCV_FULL	0x000C	/* Receive FIFO Full (2 Bytes To Read)   */
+
+#endif
diff --git a/include/linux/platform_data/i2c-s3c2410.h b/include/linux/platform_data/i2c-s3c2410.h
index 2a50048c1c44..05af66b840b9 100644
--- a/include/linux/platform_data/i2c-s3c2410.h
+++ b/include/linux/platform_data/i2c-s3c2410.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/iic.h
- *
+/*
  * Copyright 2004-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
@@ -10,8 +9,8 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM_ARCH_IIC_H
-#define __ASM_ARCH_IIC_H __FILE__
+#ifndef __I2C_S3C2410_H
+#define __I2C_S3C2410_H __FILE__
 
 #define S3C_IICFLG_FILTER	(1<<0)	/* enable s3c2440 filter */
 
@@ -76,4 +75,4 @@ extern void s3c_i2c7_cfg_gpio(struct platform_device *dev);
 
 extern struct s3c2410_platform_i2c default_i2c_data;
 
-#endif /* __ASM_ARCH_IIC_H */
+#endif /* __I2C_S3C2410_H */
diff --git a/include/trace/events/i2c.h b/include/trace/events/i2c.h
new file mode 100644
index 000000000000..fe17187df65d
--- /dev/null
+++ b/include/trace/events/i2c.h
@@ -0,0 +1,372 @@
+/* I2C and SMBUS message transfer tracepoints
+ *
+ * Copyright (C) 2013 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM i2c
+
+#if !defined(_TRACE_I2C_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_I2C_H
+
+#include <linux/i2c.h>
+#include <linux/tracepoint.h>
+
+/*
+ * drivers/i2c/i2c-core.c
+ */
+extern void i2c_transfer_trace_reg(void);
+extern void i2c_transfer_trace_unreg(void);
+
+/*
+ * __i2c_transfer() write request
+ */
+TRACE_EVENT_FN(i2c_write,
+	       TP_PROTO(const struct i2c_adapter *adap, const struct i2c_msg *msg,
+			int num),
+	       TP_ARGS(adap, msg, num),
+	       TP_STRUCT__entry(
+		       __field(int,	adapter_nr		)
+		       __field(__u16,	msg_nr			)
+		       __field(__u16,	addr			)
+		       __field(__u16,	flags			)
+		       __field(__u16,	len			)
+		       __dynamic_array(__u8, buf, msg->len)	),
+	       TP_fast_assign(
+		       __entry->adapter_nr = adap->nr;
+		       __entry->msg_nr = num;
+		       __entry->addr = msg->addr;
+		       __entry->flags = msg->flags;
+		       __entry->len = msg->len;
+		       memcpy(__get_dynamic_array(buf), msg->buf, msg->len);
+			      ),
+	       TP_printk("i2c-%d #%u a=%03x f=%04x l=%u [%*phD]",
+			 __entry->adapter_nr,
+			 __entry->msg_nr,
+			 __entry->addr,
+			 __entry->flags,
+			 __entry->len,
+			 __entry->len, __get_dynamic_array(buf)
+			 ),
+	       i2c_transfer_trace_reg,
+	       i2c_transfer_trace_unreg);
+
+/*
+ * __i2c_transfer() read request
+ */
+TRACE_EVENT_FN(i2c_read,
+	       TP_PROTO(const struct i2c_adapter *adap, const struct i2c_msg *msg,
+			int num),
+	       TP_ARGS(adap, msg, num),
+	       TP_STRUCT__entry(
+		       __field(int,	adapter_nr		)
+		       __field(__u16,	msg_nr			)
+		       __field(__u16,	addr			)
+		       __field(__u16,	flags			)
+		       __field(__u16,	len			)
+				),
+	       TP_fast_assign(
+		       __entry->adapter_nr = adap->nr;
+		       __entry->msg_nr = num;
+		       __entry->addr = msg->addr;
+		       __entry->flags = msg->flags;
+		       __entry->len = msg->len;
+			      ),
+	       TP_printk("i2c-%d #%u a=%03x f=%04x l=%u",
+			 __entry->adapter_nr,
+			 __entry->msg_nr,
+			 __entry->addr,
+			 __entry->flags,
+			 __entry->len
+			 ),
+	       i2c_transfer_trace_reg,
+		       i2c_transfer_trace_unreg);
+
+/*
+ * __i2c_transfer() read reply
+ */
+TRACE_EVENT_FN(i2c_reply,
+	       TP_PROTO(const struct i2c_adapter *adap, const struct i2c_msg *msg,
+			int num),
+	       TP_ARGS(adap, msg, num),
+	       TP_STRUCT__entry(
+		       __field(int,	adapter_nr		)
+		       __field(__u16,	msg_nr			)
+		       __field(__u16,	addr			)
+		       __field(__u16,	flags			)
+		       __field(__u16,	len			)
+		       __dynamic_array(__u8, buf, msg->len)	),
+	       TP_fast_assign(
+		       __entry->adapter_nr = adap->nr;
+		       __entry->msg_nr = num;
+		       __entry->addr = msg->addr;
+		       __entry->flags = msg->flags;
+		       __entry->len = msg->len;
+		       memcpy(__get_dynamic_array(buf), msg->buf, msg->len);
+			      ),
+	       TP_printk("i2c-%d #%u a=%03x f=%04x l=%u [%*phD]",
+			 __entry->adapter_nr,
+			 __entry->msg_nr,
+			 __entry->addr,
+			 __entry->flags,
+			 __entry->len,
+			 __entry->len, __get_dynamic_array(buf)
+			 ),
+	       i2c_transfer_trace_reg,
+	       i2c_transfer_trace_unreg);
+
+/*
+ * __i2c_transfer() result
+ */
+TRACE_EVENT_FN(i2c_result,
+	       TP_PROTO(const struct i2c_adapter *adap, int num, int ret),
+	       TP_ARGS(adap, num, ret),
+	       TP_STRUCT__entry(
+		       __field(int,	adapter_nr		)
+		       __field(__u16,	nr_msgs			)
+		       __field(__s16,	ret			)
+				),
+	       TP_fast_assign(
+		       __entry->adapter_nr = adap->nr;
+		       __entry->nr_msgs = num;
+		       __entry->ret = ret;
+			      ),
+	       TP_printk("i2c-%d n=%u ret=%d",
+			 __entry->adapter_nr,
+			 __entry->nr_msgs,
+			 __entry->ret
+			 ),
+	       i2c_transfer_trace_reg,
+	       i2c_transfer_trace_unreg);
+
+/*
+ * i2c_smbus_xfer() write data or procedure call request
+ */
+TRACE_EVENT_CONDITION(smbus_write,
+	TP_PROTO(const struct i2c_adapter *adap,
+		 u16 addr, unsigned short flags,
+		 char read_write, u8 command, int protocol,
+		 const union i2c_smbus_data *data),
+	TP_ARGS(adap, addr, flags, read_write, command, protocol, data),
+	TP_CONDITION(read_write == I2C_SMBUS_WRITE ||
+		     protocol == I2C_SMBUS_PROC_CALL ||
+		     protocol == I2C_SMBUS_BLOCK_PROC_CALL),
+	TP_STRUCT__entry(
+		__field(int,	adapter_nr		)
+		__field(__u16,	addr			)
+		__field(__u16,	flags			)
+		__field(__u8,	command			)
+		__field(__u8,	len			)
+		__field(__u32,	protocol		)
+		__array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2)	),
+	TP_fast_assign(
+		__entry->adapter_nr = adap->nr;
+		__entry->addr = addr;
+		__entry->flags = flags;
+		__entry->command = command;
+		__entry->protocol = protocol;
+
+		switch (protocol) {
+		case I2C_SMBUS_BYTE_DATA:
+			__entry->len = 1;
+			goto copy;
+		case I2C_SMBUS_WORD_DATA:
+		case I2C_SMBUS_PROC_CALL:
+			__entry->len = 2;
+			goto copy;
+		case I2C_SMBUS_BLOCK_DATA:
+		case I2C_SMBUS_BLOCK_PROC_CALL:
+		case I2C_SMBUS_I2C_BLOCK_DATA:
+			__entry->len = data->block[0] + 1;
+		copy:
+			memcpy(__entry->buf, data->block, __entry->len);
+			break;
+		case I2C_SMBUS_QUICK:
+		case I2C_SMBUS_BYTE:
+		case I2C_SMBUS_I2C_BLOCK_BROKEN:
+		default:
+			__entry->len = 0;
+		}
+		       ),
+	TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]",
+		  __entry->adapter_nr,
+		  __entry->addr,
+		  __entry->flags,
+		  __entry->command,
+		  __print_symbolic(__entry->protocol,
+				   { I2C_SMBUS_QUICK,		"QUICK"	},
+				   { I2C_SMBUS_BYTE,		"BYTE"	},
+				   { I2C_SMBUS_BYTE_DATA,		"BYTE_DATA" },
+				   { I2C_SMBUS_WORD_DATA,		"WORD_DATA" },
+				   { I2C_SMBUS_PROC_CALL,		"PROC_CALL" },
+				   { I2C_SMBUS_BLOCK_DATA,		"BLOCK_DATA" },
+				   { I2C_SMBUS_I2C_BLOCK_BROKEN,	"I2C_BLOCK_BROKEN" },
+				   { I2C_SMBUS_BLOCK_PROC_CALL,	"BLOCK_PROC_CALL" },
+				   { I2C_SMBUS_I2C_BLOCK_DATA,	"I2C_BLOCK_DATA" }),
+		  __entry->len,
+		  __entry->len, __entry->buf
+		  ));
+
+/*
+ * i2c_smbus_xfer() read data request
+ */
+TRACE_EVENT_CONDITION(smbus_read,
+	TP_PROTO(const struct i2c_adapter *adap,
+		 u16 addr, unsigned short flags,
+		 char read_write, u8 command, int protocol),
+	TP_ARGS(adap, addr, flags, read_write, command, protocol),
+	TP_CONDITION(!(read_write == I2C_SMBUS_WRITE ||
+		       protocol == I2C_SMBUS_PROC_CALL ||
+		       protocol == I2C_SMBUS_BLOCK_PROC_CALL)),
+	TP_STRUCT__entry(
+		__field(int,	adapter_nr		)
+		__field(__u16,	flags			)
+		__field(__u16,	addr			)
+		__field(__u8,	command			)
+		__field(__u32,	protocol		)
+		__array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2)	),
+	TP_fast_assign(
+		__entry->adapter_nr = adap->nr;
+		__entry->addr = addr;
+		__entry->flags = flags;
+		__entry->command = command;
+		__entry->protocol = protocol;
+		       ),
+	TP_printk("i2c-%d a=%03x f=%04x c=%x %s",
+		  __entry->adapter_nr,
+		  __entry->addr,
+		  __entry->flags,
+		  __entry->command,
+		  __print_symbolic(__entry->protocol,
+				   { I2C_SMBUS_QUICK,		"QUICK"	},
+				   { I2C_SMBUS_BYTE,		"BYTE"	},
+				   { I2C_SMBUS_BYTE_DATA,		"BYTE_DATA" },
+				   { I2C_SMBUS_WORD_DATA,		"WORD_DATA" },
+				   { I2C_SMBUS_PROC_CALL,		"PROC_CALL" },
+				   { I2C_SMBUS_BLOCK_DATA,		"BLOCK_DATA" },
+				   { I2C_SMBUS_I2C_BLOCK_BROKEN,	"I2C_BLOCK_BROKEN" },
+				   { I2C_SMBUS_BLOCK_PROC_CALL,	"BLOCK_PROC_CALL" },
+				   { I2C_SMBUS_I2C_BLOCK_DATA,	"I2C_BLOCK_DATA" })
+		  ));
+
+/*
+ * i2c_smbus_xfer() read data or procedure call reply
+ */
+TRACE_EVENT_CONDITION(smbus_reply,
+	TP_PROTO(const struct i2c_adapter *adap,
+		 u16 addr, unsigned short flags,
+		 char read_write, u8 command, int protocol,
+		 const union i2c_smbus_data *data),
+	TP_ARGS(adap, addr, flags, read_write, command, protocol, data),
+	TP_CONDITION(read_write == I2C_SMBUS_READ),
+	TP_STRUCT__entry(
+		__field(int,	adapter_nr		)
+		__field(__u16,	addr			)
+		__field(__u16,	flags			)
+		__field(__u8,	command			)
+		__field(__u8,	len			)
+		__field(__u32,	protocol		)
+		__array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2)	),
+	TP_fast_assign(
+		__entry->adapter_nr = adap->nr;
+		__entry->addr = addr;
+		__entry->flags = flags;
+		__entry->command = command;
+		__entry->protocol = protocol;
+
+		switch (protocol) {
+		case I2C_SMBUS_BYTE:
+		case I2C_SMBUS_BYTE_DATA:
+			__entry->len = 1;
+			goto copy;
+		case I2C_SMBUS_WORD_DATA:
+		case I2C_SMBUS_PROC_CALL:
+			__entry->len = 2;
+			goto copy;
+		case I2C_SMBUS_BLOCK_DATA:
+		case I2C_SMBUS_BLOCK_PROC_CALL:
+		case I2C_SMBUS_I2C_BLOCK_DATA:
+			__entry->len = data->block[0] + 1;
+		copy:
+			memcpy(__entry->buf, data->block, __entry->len);
+			break;
+		case I2C_SMBUS_QUICK:
+		case I2C_SMBUS_I2C_BLOCK_BROKEN:
+		default:
+			__entry->len = 0;
+		}
+		       ),
+	TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]",
+		  __entry->adapter_nr,
+		  __entry->addr,
+		  __entry->flags,
+		  __entry->command,
+		  __print_symbolic(__entry->protocol,
+				   { I2C_SMBUS_QUICK,		"QUICK"	},
+				   { I2C_SMBUS_BYTE,		"BYTE"	},
+				   { I2C_SMBUS_BYTE_DATA,		"BYTE_DATA" },
+				   { I2C_SMBUS_WORD_DATA,		"WORD_DATA" },
+				   { I2C_SMBUS_PROC_CALL,		"PROC_CALL" },
+				   { I2C_SMBUS_BLOCK_DATA,		"BLOCK_DATA" },
+				   { I2C_SMBUS_I2C_BLOCK_BROKEN,	"I2C_BLOCK_BROKEN" },
+				   { I2C_SMBUS_BLOCK_PROC_CALL,	"BLOCK_PROC_CALL" },
+				   { I2C_SMBUS_I2C_BLOCK_DATA,	"I2C_BLOCK_DATA" }),
+		  __entry->len,
+		  __entry->len, __entry->buf
+		  ));
+
+/*
+ * i2c_smbus_xfer() result
+ */
+TRACE_EVENT(smbus_result,
+	    TP_PROTO(const struct i2c_adapter *adap,
+		     u16 addr, unsigned short flags,
+		     char read_write, u8 command, int protocol,
+		     int res),
+	    TP_ARGS(adap, addr, flags, read_write, command, protocol, res),
+	    TP_STRUCT__entry(
+		    __field(int,	adapter_nr		)
+		    __field(__u16,	addr			)
+		    __field(__u16,	flags			)
+		    __field(__u8,	read_write		)
+		    __field(__u8,	command			)
+		    __field(__s16,	res			)
+		    __field(__u32,	protocol		)
+			     ),
+	    TP_fast_assign(
+		    __entry->adapter_nr = adap->nr;
+		    __entry->addr = addr;
+		    __entry->flags = flags;
+		    __entry->read_write = read_write;
+		    __entry->command = command;
+		    __entry->protocol = protocol;
+		    __entry->res = res;
+			   ),
+	    TP_printk("i2c-%d a=%03x f=%04x c=%x %s %s res=%d",
+		      __entry->adapter_nr,
+		      __entry->addr,
+		      __entry->flags,
+		      __entry->command,
+		      __print_symbolic(__entry->protocol,
+				       { I2C_SMBUS_QUICK,		"QUICK"	},
+				       { I2C_SMBUS_BYTE,		"BYTE"	},
+				       { I2C_SMBUS_BYTE_DATA,		"BYTE_DATA" },
+				       { I2C_SMBUS_WORD_DATA,		"WORD_DATA" },
+				       { I2C_SMBUS_PROC_CALL,		"PROC_CALL" },
+				       { I2C_SMBUS_BLOCK_DATA,		"BLOCK_DATA" },
+				       { I2C_SMBUS_I2C_BLOCK_BROKEN,	"I2C_BLOCK_BROKEN" },
+				       { I2C_SMBUS_BLOCK_PROC_CALL,	"BLOCK_PROC_CALL" },
+				       { I2C_SMBUS_I2C_BLOCK_DATA,	"I2C_BLOCK_DATA" }),
+		      __entry->read_write == I2C_SMBUS_WRITE ? "wr" : "rd",
+		      __entry->res
+		      ));
+
+#endif /* _TRACE_I2C_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
author	Linus Torvalds <torvalds@linux-foundation.org>	2014-04-09 08:45:40 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2014-04-09 08:45:40 -0700
commit	39de65aa2c3eee901db020a4f1396998e09602a3 (patch)
tree	0582450ec0b5b6b9778275b431207145d5fedfc8
parent	97e18dc007546fce8e99098480b921a02ebb3037 (diff)
parent	1fbeab0b8fd5e655ffef8a793b869eb7dffe0337 (diff)
download	linux-39de65aa2c3eee901db020a4f1396998e09602a3.tar.gz linux-39de65aa2c3eee901db020a4f1396998e09602a3.tar.bz2 linux-39de65aa2c3eee901db020a4f1396998e09602a3.zip