[PATCH] mips: remove VR4181 support

There seem to be no more users or interest in the NEC Osprey evaluation
system for the NEC VR4181 SOC which is an old part anyway, so remove the
code.  More information on the Osprey can be found at
http://www.linux-mips.org/wiki/Osprey.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 files changed, 0 insertions, 2101 deletions

diff --git a/arch/mips/configs/osprey_defconfig b/arch/mips/configs/osprey_defconfig
deleted file mode 100644
index 989cb9e7ae83..000000000000
--- a/arch/mips/configs/osprey_defconfig
+++ /dev/null
@@ -1,618 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 02:49:08 2005
-#
-CONFIG_MIPS=y
-# CONFIG_MIPS64 is not set
-# CONFIG_64BIT is not set
-CONFIG_MIPS32=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ITE8172 is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_DDB5074 is not set
-# CONFIG_DDB5476 is not set
-# CONFIG_DDB5477 is not set
-CONFIG_NEC_OSPREY=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SOC_AU1X00 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_VR4181=y
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32 is not set
-# CONFIG_CPU_MIPS64 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-CONFIG_CPU_VR41XX=y
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_CPU_ADVANCED is not set
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_PREEMPT is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PC-card bridges
-#
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="ip=bootp ether=46,0x03fe0300,eth0"
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/vr4181/common/Makefile b/arch/mips/vr4181/common/Makefile
deleted file mode 100644
index f7587ca64ead..000000000000
--- a/arch/mips/vr4181/common/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for common code of NEC vr4181 based boards
-#
-
-obj-y	 := irq.o int_handler.o serial.o time.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/vr4181/common/int_handler.S b/arch/mips/vr4181/common/int_handler.S
deleted file mode 100644
index 2c041b8ee52b..000000000000
--- a/arch/mips/vr4181/common/int_handler.S
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * arch/mips/vr4181/common/int_handler.S
- *
- * Adapted to the VR4181 and almost entirely rewritten:
- * Copyright (C) 1999 Bradley D. LaRonde and Michael Klar
- *
- * Clean up to conform to the new IRQ
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#include <asm/asm.h>
-#include <asm/regdef.h>
-#include <asm/mipsregs.h>
-#include <asm/stackframe.h>
-
-#include <asm/vr4181/vr4181.h>
-
-/*
- * [jsun]
- * See include/asm/vr4181/irq.h for IRQ assignment and strategy.
- */
-
-	.text
-	.set	noreorder
-
-	.align	5
-	NESTED(vr4181_handle_irq, PT_SIZE, ra)
-
-	.set	noat
-	SAVE_ALL
-	CLI
-
-	.set	at
-	.set	noreorder
-
-	mfc0	t0, CP0_CAUSE
-	mfc0	t2, CP0_STATUS
-
-	and	t0, t2
-
-	/* we check IP3 first; it happens most frequently */
-	andi	t1, t0, STATUSF_IP3
-	bnez	t1, ll_cpu_ip3
-	andi	t1, t0, STATUSF_IP2
-	bnez	t1, ll_cpu_ip2
-	andi	t1, t0, STATUSF_IP7	/* cpu timer */
-	bnez	t1, ll_cputimer_irq
-	andi	t1, t0, STATUSF_IP4
-	bnez	t1, ll_cpu_ip4
-	andi	t1, t0, STATUSF_IP5
-	bnez	t1, ll_cpu_ip5
-	andi	t1, t0, STATUSF_IP6
-	bnez	t1, ll_cpu_ip6
-	andi	t1, t0, STATUSF_IP0	/* software int 0 */
-	bnez	t1, ll_cpu_ip0
-	andi	t1, t0, STATUSF_IP1	/* software int 1 */
-	bnez	t1, ll_cpu_ip1
-	nop
-
-	.set	reorder
-do_spurious:
-	j	spurious_interrupt
-
-/*
- * regular CPU irqs
- */
-ll_cputimer_irq:
-	li	a0, VR4181_IRQ_TIMER
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-
-ll_cpu_ip0:
-	li	a0, VR4181_IRQ_SW1
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-ll_cpu_ip1:
-	li	a0, VR4181_IRQ_SW2
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-ll_cpu_ip3:
-	li	a0, VR4181_IRQ_INT1
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-ll_cpu_ip4:
-	li	a0, VR4181_IRQ_INT2
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-ll_cpu_ip5:
-	li	a0, VR4181_IRQ_INT3
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-ll_cpu_ip6:
-	li	a0, VR4181_IRQ_INT4
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-/*
- *  One of the sys irq has happend.
- *
- *  In the interest of speed, we first determine in the following order
- *  which 16-irq block have pending interrupts:
- *	sysint1 (16 sources, including cascading intrs from GPIO)
- *	sysint2
- *	gpio (16 intr sources)
- *
- *  Then we do binary search to find the exact interrupt source.
- */
-ll_cpu_ip2:
-
-	lui	t3,%hi(VR4181_SYSINT1REG)
-	lhu	t0,%lo(VR4181_SYSINT1REG)(t3)
-	lhu	t2,%lo(VR4181_MSYSINT1REG)(t3)
-	and	t0, 0xfffb		/* hack - remove RTC Long 1 intr */
-	and	t0, t2
-	beqz	t0, check_sysint2
-
-	/* check for GPIO interrupts */
-	andi	t1, t0, 0x0100
-	bnez	t1, check_gpio_int
-
-	/* so we have an interrupt in sysint1 which is not gpio int */
-	li	a0, VR4181_SYS_IRQ_BASE - 1
-	j	check_16
-
-check_sysint2:
-
-	lhu	t0,%lo(VR4181_SYSINT2REG)(t3)
-	lhu	t2,%lo(VR4181_MSYSINT2REG)(t3)
-	and	t0, 0xfffe		/* hack - remove RTC Long 2 intr */
-	and	t0, t2
-	li	a0, VR4181_SYS_IRQ_BASE + 16 - 1
-	j	check_16
-
-check_gpio_int:
-	lui	t3,%hi(VR4181_GPINTMSK)
-	lhu	t0,%lo(VR4181_GPINTMSK)(t3)
-	lhu	t2,%lo(VR4181_GPINTSTAT)(t3)
-	xori	t0, 0xffff			/* why? reverse logic? */
-	and	t0, t2
-	li	a0, VR4181_GPIO_IRQ_BASE - 1
-	j	check_16
-
-/*
- *  When we reach check_16, we have 16-bit status in t0 and base irq number
- *  in a0.
- */
-check_16:
-	andi	t1, t0, 0xff
-	bnez	t1, check_8
-
-	srl	t0, 8
-	addi	a0, 8
-	j	check_8
-
-/*
- *  When we reach check_8, we have 8-bit status in t0 and base irq number
- *  in a0.
- */
-check_8:
-	andi	t1, t0, 0xf
-	bnez	t1, check_4
-
-	srl	t0, 4
-	addi	a0, 4
-	j	check_4
-
-/*
- *  When we reach check_4, we have 4-bit status in t0 and base irq number
- *  in a0.
- */
-check_4:
-	andi	t0, t0, 0xf
-	beqz	t0, do_spurious
-
-loop:
-	andi	t2, t0, 0x1
-	srl	t0, 1
-	addi	a0, 1
-	beqz	t2, loop
-
-found_it:
-	move	a1, sp
-	jal	do_IRQ
-
-	j	ret_from_irq
-
-	END(vr4181_handle_irq)
diff --git a/arch/mips/vr4181/common/irq.c b/arch/mips/vr4181/common/irq.c
deleted file mode 100644
index 2cdf77c5cb3e..000000000000
--- a/arch/mips/vr4181/common/irq.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
- *
- * linux/arch/mips/vr4181/common/irq.c
- *	Completely re-written to use the new irq.c
- *
- * Credits to Bradley D. LaRonde and Michael Klar for writing the original
- * irq.c file which was derived from the common irq.c file.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/gdb-stub.h>
-
-#include <asm/vr4181/vr4181.h>
-
-/*
- * Strategy:
- *
- * We essentially have three irq controllers, CPU, system, and gpio.
- *
- * CPU irq controller is taken care by arch/mips/kernel/irq_cpu.c and
- * CONFIG_IRQ_CPU config option.
- *
- * We here provide sys_irq and gpio_irq controller code.
- */
-
-static int sys_irq_base;
-static int gpio_irq_base;
-
-/* ---------------------- sys irq ------------------------ */
-static void
-sys_irq_enable(unsigned int irq)
-{
-	irq -= sys_irq_base;
-	if (irq < 16) {
-		*VR4181_MSYSINT1REG |= (u16)(1 << irq);
-	} else {
-		irq -= 16;
-		*VR4181_MSYSINT2REG |= (u16)(1 << irq);
-	}
-}
-
-static void
-sys_irq_disable(unsigned int irq)
-{
-	irq -= sys_irq_base;
-	if (irq < 16) {
-		*VR4181_MSYSINT1REG &= ~((u16)(1 << irq));
-	} else {
-		irq -= 16;
-		*VR4181_MSYSINT2REG &= ~((u16)(1 << irq));
-	}
-
-}
-
-static unsigned int
-sys_irq_startup(unsigned int irq)
-{
-	sys_irq_enable(irq);
-	return 0;
-}
-
-#define sys_irq_shutdown	sys_irq_disable
-#define sys_irq_ack		sys_irq_disable
-
-static void
-sys_irq_end(unsigned int irq)
-{
-	if(!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		sys_irq_enable(irq);
-}
-
-static hw_irq_controller sys_irq_controller = {
-	"vr4181_sys_irq",
-	sys_irq_startup,
-	sys_irq_shutdown,
-	sys_irq_enable,
-	sys_irq_disable,
-	sys_irq_ack,
-	sys_irq_end,
-	NULL			/* no affinity stuff for UP */
-};
-
-/* ---------------------- gpio irq ------------------------ */
-/* gpio irq lines use reverse logic */
-static void
-gpio_irq_enable(unsigned int irq)
-{
-	irq -= gpio_irq_base;
-	*VR4181_GPINTMSK &= ~((u16)(1 << irq));
-}
-
-static void
-gpio_irq_disable(unsigned int irq)
-{
-	irq -= gpio_irq_base;
-	*VR4181_GPINTMSK |= (u16)(1 << irq);
-}
-
-static unsigned int
-gpio_irq_startup(unsigned int irq)
-{
-	gpio_irq_enable(irq);
-
-	irq -= gpio_irq_base;
-	*VR4181_GPINTEN |= (u16)(1 << irq );
-
-	return 0;
-}
-
-static void
-gpio_irq_shutdown(unsigned int irq)
-{
-	gpio_irq_disable(irq);
-
-	irq -= gpio_irq_base;
-	*VR4181_GPINTEN &= ~((u16)(1 << irq ));
-}
-
-static void
-gpio_irq_ack(unsigned int irq)
-{
-	u16 irqtype;
-	u16 irqshift;
-
-	gpio_irq_disable(irq);
-
-	/* we clear interrupt if it is edge triggered */
-	irq -= gpio_irq_base;
-	if (irq < 8) {
-		irqtype = *VR4181_GPINTTYPL;
-		irqshift = 2 << (irq*2);
-	} else {
-		irqtype = *VR4181_GPINTTYPH;
-		irqshift = 2 << ((irq-8)*2);
-	}
-	if ( ! (irqtype & irqshift) ) {
-		*VR4181_GPINTSTAT = (u16) (1 << irq);
-	}
-}
-
-static void
-gpio_irq_end(unsigned int irq)
-{
-	if(!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		gpio_irq_enable(irq);
-}
-
-static hw_irq_controller gpio_irq_controller = {
-	"vr4181_gpio_irq",
-	gpio_irq_startup,
-	gpio_irq_shutdown,
-	gpio_irq_enable,
-	gpio_irq_disable,
-	gpio_irq_ack,
-	gpio_irq_end,
-	NULL			/* no affinity stuff for UP */
-};
-
-/* ---------------------  IRQ init stuff ---------------------- */
-
-extern asmlinkage void vr4181_handle_irq(void);
-extern void breakpoint(void);
-extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
-extern void mips_cpu_irq_init(u32 irq_base);
-
-static struct irqaction cascade =
-	{ no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade", NULL, NULL };
-static struct irqaction reserved =
-	{ no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade", NULL, NULL };
-
-void __init arch_init_irq(void)
-{
-	int i;
-
-	set_except_vector(0, vr4181_handle_irq);
-
-	/* init CPU irqs */
-	mips_cpu_irq_init(VR4181_CPU_IRQ_BASE);
-
-	/* init sys irqs */
-	sys_irq_base = VR4181_SYS_IRQ_BASE;
-	for (i=sys_irq_base; i < sys_irq_base + VR4181_NUM_SYS_IRQ; i++) {
-		irq_desc[i].status = IRQ_DISABLED;
-		irq_desc[i].action = NULL;
-		irq_desc[i].depth = 1;
-		irq_desc[i].handler = &sys_irq_controller;
-	}
-
-	/* init gpio irqs */
-	gpio_irq_base = VR4181_GPIO_IRQ_BASE;
-	for (i=gpio_irq_base; i < gpio_irq_base + VR4181_NUM_GPIO_IRQ; i++) {
-		irq_desc[i].status = IRQ_DISABLED;
-		irq_desc[i].action = NULL;
-		irq_desc[i].depth = 1;
-		irq_desc[i].handler = &gpio_irq_controller;
-	}
-
-	/* Default all ICU IRQs to off ... */
-	*VR4181_MSYSINT1REG = 0;
-	*VR4181_MSYSINT2REG = 0;
-
-	/* We initialize the level 2 ICU registers to all bits disabled. */
-	*VR4181_MPIUINTREG = 0;
-	*VR4181_MAIUINTREG = 0;
-	*VR4181_MKIUINTREG = 0;
-
-	/* disable all GPIO intrs */
-	*VR4181_GPINTMSK = 0xffff;
-
-	/* vector handler.  What these do is register the IRQ as non-sharable */
-	setup_irq(VR4181_IRQ_INT0, &cascade);
-	setup_irq(VR4181_IRQ_GIU, &cascade);
-
-	/*
-	 * RTC interrupts are interesting.  They have two destinations.
-	 * One is at sys irq controller, and the other is at CPU IP3 and IP4.
-	 * RTC timer is used as system timer.
-	 * We enable them here, but timer routine will register later
-	 * with CPU IP3/IP4.
-	 */
-	setup_irq(VR4181_IRQ_RTCL1, &reserved);
-	setup_irq(VR4181_IRQ_RTCL2, &reserved);
-}
diff --git a/arch/mips/vr4181/common/serial.c b/arch/mips/vr4181/common/serial.c
deleted file mode 100644
index 3f62c62b107f..000000000000
--- a/arch/mips/vr4181/common/serial.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * arch/mips/vr4181/common/serial.c
- *     initialize serial port on vr4181.
- *
- * This program is free software; you can redistribute	it and/or modify it
- * under  the terms of	the GNU General	 Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-/*
- * [jsun, 010925]
- * You need to make sure rs_table has at least one element in
- * drivers/char/serial.c file.	There is no good way to do it right
- * now.	 A workaround is to include CONFIG_SERIAL_MANY_PORTS in your
- * configure file, which would gives you 64 ports and wastes 11K ram.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-
-#include <asm/vr4181/vr4181.h>
-
-void __init vr4181_init_serial(void)
-{
-	struct serial_struct s;
-
-	/* turn on UART clock */
-	*VR4181_CMUCLKMSK |= VR4181_CMUCLKMSK_MSKSIU;
-
-	/* clear memory */
-	memset(&s, 0, sizeof(s));
-
-	s.line = 0;			/* we set the first one */
-	s.baud_base = 1152000;
-	s.irq = VR4181_IRQ_SIU;
-	s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; /* STD_COM_FLAGS */
-	s.iomem_base = (u8*)VR4181_SIURB;
-	s.iomem_reg_shift = 0;
-	s.io_type = SERIAL_IO_MEM;
-	if (early_serial_setup(&s) != 0) {
-		panic("vr4181_init_serial() failed!");
-	}
-}
-
diff --git a/arch/mips/vr4181/common/time.c b/arch/mips/vr4181/common/time.c
deleted file mode 100644
index 17814076b6f4..000000000000
--- a/arch/mips/vr4181/common/time.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * rtc and time ops for vr4181.	 Part of code is drived from
- * linux-vr, originally written	 by Bradley D. LaRonde & Michael Klar.
- *
- * This program is free software; you can redistribute	it and/or modify it
- * under  the terms of	the GNU General	 Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/param.h>			/* for HZ */
-#include <linux/time.h>
-#include <linux/interrupt.h>
-
-#include <asm/system.h>
-#include <asm/time.h>
-
-#include <asm/vr4181/vr4181.h>
-
-#define COUNTS_PER_JIFFY ((32768 + HZ/2) / HZ)
-
-/*
- * RTC ops
- */
-
-DEFINE_SPINLOCK(rtc_lock);
-
-/* per VR41xx docs, bad data can be read if between 2 counts */
-static inline unsigned short
-read_time_reg(volatile unsigned short *reg)
-{
-	unsigned short value;
-	do {
-		value = *reg;
-		barrier();
-	} while (value != *reg);
-	return value;
-}
-
-static unsigned long
-vr4181_rtc_get_time(void)
-{
-	unsigned short regh, regm, regl;
-
-	// why this crazy order, you ask?  to guarantee that neither m
-	// nor l wrap before all 3 read
-	do {
-		regm = read_time_reg(VR4181_ETIMEMREG);
-		barrier();
-		regh = read_time_reg(VR4181_ETIMEHREG);
-		barrier();
-		regl = read_time_reg(VR4181_ETIMELREG);
-	} while (regm != read_time_reg(VR4181_ETIMEMREG));
-	return ((regh << 17) | (regm << 1) | (regl >> 15));
-}
-
-static int
-vr4181_rtc_set_time(unsigned long timeval)
-{
-	unsigned short intreg;
-	unsigned long flags;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	intreg = *VR4181_RTCINTREG & 0x05;
-	barrier();
-	*VR4181_ETIMELREG = timeval << 15;
-	*VR4181_ETIMEMREG = timeval >> 1;
-	*VR4181_ETIMEHREG = timeval >> 17;
-	barrier();
-	// assume that any ints that just triggered are invalid, since the
-	// time value is written non-atomically in 3 separate regs
-	*VR4181_RTCINTREG = 0x05 ^ intreg;
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	return 0;
-}
-
-
-/*
- * timer interrupt routine (wrapper)
- *
- * we need our own interrupt routine because we need to clear
- * RTC1 interrupt.
- */
-static void
-vr4181_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
-	/* Clear the interrupt. */
-	*VR4181_RTCINTREG = 0x2;
-
-	/* call the generic one */
-	timer_interrupt(irq, dev_id, regs);
-}
-
-
-/*
- * vr4181_time_init:
- *
- * We pick the following choices:
- *   . we use elapsed timer as the RTC.	 We set some reasonable init data since
- *     it does not persist across reset
- *   . we use RTC1 as the system timer interrupt source.
- *   . we use CPU counter for fast_gettimeoffset and we calivrate the cpu
- *     frequency.  In other words, we use calibrate_div64_gettimeoffset().
- *   . we use our own timer interrupt routine which clears the interrupt
- *     and then calls the generic high-level timer interrupt routine.
- *
- */
-
-extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
-
-static void
-vr4181_timer_setup(struct irqaction *irq)
-{
-	/* over-write the handler to be our own one */
-	irq->handler = vr4181_timer_interrupt;
-
-	/* sets up the frequency */
-	*VR4181_RTCL1LREG = COUNTS_PER_JIFFY;
-	*VR4181_RTCL1HREG = 0;
-
-	/* and ack any pending ints */
-	*VR4181_RTCINTREG = 0x2;
-
-	/* setup irqaction */
-	setup_irq(VR4181_IRQ_INT1, irq);
-
-}
-
-void
-vr4181_init_time(void)
-{
-	/* setup hookup functions */
-	rtc_get_time = vr4181_rtc_get_time;
-	rtc_set_time = vr4181_rtc_set_time;
-
-	board_timer_setup = vr4181_timer_setup;
-}
-
diff --git a/arch/mips/vr4181/osprey/Makefile b/arch/mips/vr4181/osprey/Makefile
deleted file mode 100644
index 34be05790883..000000000000
--- a/arch/mips/vr4181/osprey/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for common code of NEC Osprey board
-#
-
-obj-y	 := setup.o prom.o reset.o
-
-obj-$(CONFIG_KGDB)	+= dbg_io.o
diff --git a/arch/mips/vr4181/osprey/dbg_io.c b/arch/mips/vr4181/osprey/dbg_io.c
deleted file mode 100644
index 5e8a84072d5b..000000000000
--- a/arch/mips/vr4181/osprey/dbg_io.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * kgdb io functions for osprey.  We use the serial port on debug board.
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-/* ======================= CONFIG ======================== */
-
-/* [jsun] we use the second serial port for kdb */
-#define         BASE                    0xb7fffff0
-#define         MAX_BAUD                115200
-
-/* distance in bytes between two serial registers */
-#define         REG_OFFSET              1
-
-/*
- * 0 - kgdb does serial init
- * 1 - kgdb skip serial init
- */
-static int remoteDebugInitialized = 1;
-
-/*
- * the default baud rate *if* kgdb does serial init
- */
-#define		BAUD_DEFAULT		UART16550_BAUD_38400
-
-/* ======================= END OF CONFIG ======================== */
-
-typedef unsigned char uint8;
-typedef unsigned int uint32;
-
-#define         UART16550_BAUD_2400             2400
-#define         UART16550_BAUD_4800             4800
-#define         UART16550_BAUD_9600             9600
-#define         UART16550_BAUD_19200            19200
-#define         UART16550_BAUD_38400            38400
-#define         UART16550_BAUD_57600            57600
-#define         UART16550_BAUD_115200           115200
-
-#define         UART16550_PARITY_NONE           0
-#define         UART16550_PARITY_ODD            0x08
-#define         UART16550_PARITY_EVEN           0x18
-#define         UART16550_PARITY_MARK           0x28
-#define         UART16550_PARITY_SPACE          0x38
-
-#define         UART16550_DATA_5BIT             0x0
-#define         UART16550_DATA_6BIT             0x1
-#define         UART16550_DATA_7BIT             0x2
-#define         UART16550_DATA_8BIT             0x3
-
-#define         UART16550_STOP_1BIT             0x0
-#define         UART16550_STOP_2BIT             0x4
-
-/* register offset */
-#define         OFS_RCV_BUFFER          0
-#define         OFS_TRANS_HOLD          0
-#define         OFS_SEND_BUFFER         0
-#define         OFS_INTR_ENABLE         (1*REG_OFFSET)
-#define         OFS_INTR_ID             (2*REG_OFFSET)
-#define         OFS_DATA_FORMAT         (3*REG_OFFSET)
-#define         OFS_LINE_CONTROL        (3*REG_OFFSET)
-#define         OFS_MODEM_CONTROL       (4*REG_OFFSET)
-#define         OFS_RS232_OUTPUT        (4*REG_OFFSET)
-#define         OFS_LINE_STATUS         (5*REG_OFFSET)
-#define         OFS_MODEM_STATUS        (6*REG_OFFSET)
-#define         OFS_RS232_INPUT         (6*REG_OFFSET)
-#define         OFS_SCRATCH_PAD         (7*REG_OFFSET)
-
-#define         OFS_DIVISOR_LSB         (0*REG_OFFSET)
-#define         OFS_DIVISOR_MSB         (1*REG_OFFSET)
-
-
-/* memory-mapped read/write of the port */
-#define         UART16550_READ(y)    (*((volatile uint8*)(BASE + y)))
-#define         UART16550_WRITE(y, z)  ((*((volatile uint8*)(BASE + y))) = z)
-
-void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
-{
-        /* disable interrupts */
-        UART16550_WRITE(OFS_INTR_ENABLE, 0);
-
-        /* set up buad rate */
-        {
-                uint32 divisor;
-
-                /* set DIAB bit */
-                UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
-
-                /* set divisor */
-                divisor = MAX_BAUD / baud;
-                UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
-                UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-
-                /* clear DIAB bit */
-                UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
-        }
-
-        /* set data format */
-        UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
-}
-
-
-uint8 getDebugChar(void)
-{
-        if (!remoteDebugInitialized) {
-                remoteDebugInitialized = 1;
-                debugInit(BAUD_DEFAULT,
-                          UART16550_DATA_8BIT,
-                          UART16550_PARITY_NONE, UART16550_STOP_1BIT);
-        }
-
-        while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
-        return UART16550_READ(OFS_RCV_BUFFER);
-}
-
-
-int putDebugChar(uint8 byte)
-{
-        if (!remoteDebugInitialized) {
-                remoteDebugInitialized = 1;
-                debugInit(BAUD_DEFAULT,
-                          UART16550_DATA_8BIT,
-                          UART16550_PARITY_NONE, UART16550_STOP_1BIT);
-        }
-
-        while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
-        UART16550_WRITE(OFS_SEND_BUFFER, byte);
-        return 1;
-}
diff --git a/arch/mips/vr4181/osprey/prom.c b/arch/mips/vr4181/osprey/prom.c
deleted file mode 100644
index af0d14561619..000000000000
--- a/arch/mips/vr4181/osprey/prom.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * arch/mips/vr4181/osprey/prom.c
- *     prom code for osprey.
- *
- * This program is free software; you can redistribute	it and/or modify it
- * under  the terms of	the GNU General	 Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-const char *get_system_type(void)
-{
-	return "NEC_Vr41xx Osprey";
-}
-
-/*
- * [jsun] right now we assume it is the nec debug monitor, which does
- * not pass any arguments.
- */
-void __init prom_init(void)
-{
-	// cmdline is now set in default config
-	// strcpy(arcs_cmdline, "ip=bootp ");
-	// strcat(arcs_cmdline, "ether=46,0x03fe0300,eth0 ");
-	// strcpy(arcs_cmdline, "ether=0,0x0300,eth0 "
-	// strcat(arcs_cmdline, "video=vr4181fb:xres:240,yres:320,bpp:8 ");
-
-	mips_machgroup = MACH_GROUP_NEC_VR41XX;
-	mips_machtype = MACH_NEC_OSPREY;
-
-	/* 16MB fixed */
-	add_memory_region(0, 16 << 20, BOOT_MEM_RAM);
-}
-
-unsigned long __init prom_free_prom_memory(void)
-{
-	return 0;
-}
diff --git a/arch/mips/vr4181/osprey/reset.c b/arch/mips/vr4181/osprey/reset.c
deleted file mode 100644
index 036ae83d89d6..000000000000
--- a/arch/mips/vr4181/osprey/reset.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * This program is free software; you can redistribute	it and/or modify it
- * under  the terms of	the GNU General	 Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Copyright (C) 1997, 2001 Ralf Baechle
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/io.h>
-#include <asm/cacheflush.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/system.h>
-
-void nec_osprey_restart(char *command)
-{
-	set_c0_status(ST0_ERL);
-	change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
-	flush_cache_all();
-	write_c0_wired(0);
-	__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-}
-
-void nec_osprey_halt(void)
-{
-	printk(KERN_NOTICE "\n** You can safely turn off the power\n");
-	while (1)
-		__asm__(".set\tmips3\n\t"
-			"wait\n\t"
-			".set\tmips0");
-}
-
-void nec_osprey_power_off(void)
-{
-	nec_osprey_halt();
-}
diff --git a/arch/mips/vr4181/osprey/setup.c b/arch/mips/vr4181/osprey/setup.c
deleted file mode 100644
index 2ff7140e7ed7..000000000000
--- a/arch/mips/vr4181/osprey/setup.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * linux/arch/mips/vr4181/setup.c
- *
- * VR41xx setup routines
- *
- * Copyright (C) 1999 Bradley D. LaRonde
- * Copyright (C) 1999, 2000 Michael Klar
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <asm/reboot.h>
-#include <asm/vr4181/vr4181.h>
-#include <asm/io.h>
-
-
-extern void nec_osprey_restart(char* c);
-extern void nec_osprey_halt(void);
-extern void nec_osprey_power_off(void);
-
-extern void vr4181_init_serial(void);
-extern void vr4181_init_time(void);
-
-static void __init nec_osprey_setup(void)
-{
-	set_io_port_base(VR4181_PORT_BASE);
-	isa_slot_offset = VR4181_ISAMEM_BASE;
-
-	vr4181_init_serial();
-	vr4181_init_time();
-
-	_machine_restart = nec_osprey_restart;
-	_machine_halt = nec_osprey_halt;
-	_machine_power_off = nec_osprey_power_off;
-
-	/* setup resource limit */
-	ioport_resource.end = 0xffffffff;
-	iomem_resource.end = 0xffffffff;
-
-	/* [jsun] hack */
-	/*
-	printk("[jsun] hack to change external ISA control register, %x -> %x\n",
-		(*VR4181_XISACTL),
-		(*VR4181_XISACTL) | 0x2);
-	*VR4181_XISACTL |= 0x2;
-	*/
-
-	// *VR4181_GPHIBSTH = 0x2000;
-	// *VR4181_GPMD0REG = 0x00c0;
-	// *VR4181_GPINTEN	 = 1<<6;
-
-	/* [jsun] I believe this will get the interrupt type right
-	 * for the ether port.
-	 */
-	*VR4181_GPINTTYPL = 0x3000;
-}
-
-early_initcall(nec_osprey_setup);
diff --git a/include/asm-mips/vr4181/irq.h b/include/asm-mips/vr4181/irq.h
deleted file mode 100644
index 4bf0ea970ed0..000000000000
--- a/include/asm-mips/vr4181/irq.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Macros for vr4181 IRQ numbers.
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-/*
- * Strategy:
- *
- * Vr4181 has conceptually three levels of interrupt controllers:
- *  1. the CPU itself with 8 intr level.
- *  2. system interrupt controller, cascaded from int0 pin in CPU, 32 intrs
- *  3. GPIO interrupts : forwarding external interrupts to sys intr controller
- */
-
-/* decide the irq block assignment */
-#define	VR4181_NUM_CPU_IRQ	8
-#define	VR4181_NUM_SYS_IRQ	32
-#define	VR4181_NUM_GPIO_IRQ	16
-
-#define	VR4181_IRQ_BASE		0
-
-#define	VR4181_CPU_IRQ_BASE	VR4181_IRQ_BASE
-#define	VR4181_SYS_IRQ_BASE	(VR4181_CPU_IRQ_BASE + VR4181_NUM_CPU_IRQ)
-#define	VR4181_GPIO_IRQ_BASE	(VR4181_SYS_IRQ_BASE + VR4181_NUM_SYS_IRQ)
-
-/* CPU interrupts */
-
-/*
-   IP0 - Software interrupt
-   IP1 - Software interrupt
-   IP2 - All but battery, high speed modem, and real time clock
-   IP3 - RTC Long1 (system timer)
-   IP4 - RTC Long2
-   IP5 - High Speed Modem (unused on VR4181)
-   IP6 - Unused
-   IP7 - Timer interrupt from CPO_COMPARE
-*/
-
-#define VR4181_IRQ_SW1       (VR4181_CPU_IRQ_BASE + 0)
-#define VR4181_IRQ_SW2       (VR4181_CPU_IRQ_BASE + 1)
-#define VR4181_IRQ_INT0      (VR4181_CPU_IRQ_BASE + 2)
-#define VR4181_IRQ_INT1      (VR4181_CPU_IRQ_BASE + 3)
-#define VR4181_IRQ_INT2      (VR4181_CPU_IRQ_BASE + 4)
-#define VR4181_IRQ_INT3      (VR4181_CPU_IRQ_BASE + 5)
-#define VR4181_IRQ_INT4      (VR4181_CPU_IRQ_BASE + 6)
-#define VR4181_IRQ_TIMER     (VR4181_CPU_IRQ_BASE + 7)
-
-
-/* Cascaded from VR4181_IRQ_INT0 (ICU mapped interrupts) */
-
-/*
-   IP2 - same as VR4181_IRQ_INT1
-   IP8 - This is a cascade to GPIO IRQ's. Do not use.
-   IP16 - same as VR4181_IRQ_INT2
-   IP18 - CompactFlash
-*/
-
-#define VR4181_IRQ_BATTERY   (VR4181_SYS_IRQ_BASE + 0)
-#define VR4181_IRQ_POWER     (VR4181_SYS_IRQ_BASE + 1)
-#define VR4181_IRQ_RTCL1     (VR4181_SYS_IRQ_BASE + 2)
-#define VR4181_IRQ_ETIMER    (VR4181_SYS_IRQ_BASE + 3)
-#define VR4181_IRQ_RFU12     (VR4181_SYS_IRQ_BASE + 4)
-#define VR4181_IRQ_PIU       (VR4181_SYS_IRQ_BASE + 5)
-#define VR4181_IRQ_AIU       (VR4181_SYS_IRQ_BASE + 6)
-#define VR4181_IRQ_KIU       (VR4181_SYS_IRQ_BASE + 7)
-#define VR4181_IRQ_GIU       (VR4181_SYS_IRQ_BASE + 8)
-#define VR4181_IRQ_SIU       (VR4181_SYS_IRQ_BASE + 9)
-#define VR4181_IRQ_RFU18     (VR4181_SYS_IRQ_BASE + 10)
-#define VR4181_IRQ_SOFT      (VR4181_SYS_IRQ_BASE + 11)
-#define VR4181_IRQ_RFU20     (VR4181_SYS_IRQ_BASE + 12)
-#define VR4181_IRQ_DOZEPIU   (VR4181_SYS_IRQ_BASE + 13)
-#define VR4181_IRQ_RFU22     (VR4181_SYS_IRQ_BASE + 14)
-#define VR4181_IRQ_RFU23     (VR4181_SYS_IRQ_BASE + 15)
-#define VR4181_IRQ_RTCL2     (VR4181_SYS_IRQ_BASE + 16)
-#define VR4181_IRQ_LED       (VR4181_SYS_IRQ_BASE + 17)
-#define VR4181_IRQ_ECU       (VR4181_SYS_IRQ_BASE + 18)
-#define VR4181_IRQ_CSU       (VR4181_SYS_IRQ_BASE + 19)
-#define VR4181_IRQ_USB       (VR4181_SYS_IRQ_BASE + 20)
-#define VR4181_IRQ_DMA       (VR4181_SYS_IRQ_BASE + 21)
-#define VR4181_IRQ_LCD       (VR4181_SYS_IRQ_BASE + 22)
-#define VR4181_IRQ_RFU31     (VR4181_SYS_IRQ_BASE + 23)
-#define VR4181_IRQ_RFU32     (VR4181_SYS_IRQ_BASE + 24)
-#define VR4181_IRQ_RFU33     (VR4181_SYS_IRQ_BASE + 25)
-#define VR4181_IRQ_RFU34     (VR4181_SYS_IRQ_BASE + 26)
-#define VR4181_IRQ_RFU35     (VR4181_SYS_IRQ_BASE + 27)
-#define VR4181_IRQ_RFU36     (VR4181_SYS_IRQ_BASE + 28)
-#define VR4181_IRQ_RFU37     (VR4181_SYS_IRQ_BASE + 29)
-#define VR4181_IRQ_RFU38     (VR4181_SYS_IRQ_BASE + 30)
-#define VR4181_IRQ_RFU39     (VR4181_SYS_IRQ_BASE + 31)
-
-/* Cascaded from VR4181_IRQ_GIU */
-#define VR4181_IRQ_GPIO0     (VR4181_GPIO_IRQ_BASE + 0)
-#define VR4181_IRQ_GPIO1     (VR4181_GPIO_IRQ_BASE + 1)
-#define VR4181_IRQ_GPIO2     (VR4181_GPIO_IRQ_BASE + 2)
-#define VR4181_IRQ_GPIO3     (VR4181_GPIO_IRQ_BASE + 3)
-#define VR4181_IRQ_GPIO4     (VR4181_GPIO_IRQ_BASE + 4)
-#define VR4181_IRQ_GPIO5     (VR4181_GPIO_IRQ_BASE + 5)
-#define VR4181_IRQ_GPIO6     (VR4181_GPIO_IRQ_BASE + 6)
-#define VR4181_IRQ_GPIO7     (VR4181_GPIO_IRQ_BASE + 7)
-#define VR4181_IRQ_GPIO8     (VR4181_GPIO_IRQ_BASE + 8)
-#define VR4181_IRQ_GPIO9     (VR4181_GPIO_IRQ_BASE + 9)
-#define VR4181_IRQ_GPIO10    (VR4181_GPIO_IRQ_BASE + 10)
-#define VR4181_IRQ_GPIO11    (VR4181_GPIO_IRQ_BASE + 11)
-#define VR4181_IRQ_GPIO12    (VR4181_GPIO_IRQ_BASE + 12)
-#define VR4181_IRQ_GPIO13    (VR4181_GPIO_IRQ_BASE + 13)
-#define VR4181_IRQ_GPIO14    (VR4181_GPIO_IRQ_BASE + 14)
-#define VR4181_IRQ_GPIO15    (VR4181_GPIO_IRQ_BASE + 15)
-
-
-// Alternative to above GPIO IRQ defines
-#define VR4181_IRQ_GPIO(pin) ((VR4181_IRQ_GPIO0) + (pin))
-
-#define VR4181_IRQ_MAX       (VR4181_IRQ_BASE + VR4181_NUM_CPU_IRQ + \
-                              VR4181_NUM_SYS_IRQ + VR4181_NUM_GPIO_IRQ)
diff --git a/include/asm-mips/vr4181/vr4181.h b/include/asm-mips/vr4181/vr4181.h
deleted file mode 100644
index 5c5d60741515..000000000000
--- a/include/asm-mips/vr4181/vr4181.h
+++ /dev/null
@@ -1,413 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999 by Michael Klar
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- */
-#ifndef __ASM_VR4181_VR4181_H
-#define __ASM_VR4181_VR4181_H
-
-#include <asm/addrspace.h>
-
-#include <asm/vr4181/irq.h>
-
-#ifndef __ASSEMBLY__
-#define __preg8		(volatile unsigned char*)
-#define __preg16	(volatile unsigned short*)
-#define __preg32	(volatile unsigned int*)
-#else
-#define __preg8
-#define __preg16
-#define __preg32
-#endif
-
-// Embedded CPU peripheral registers
-// Note that many of the registers have different physical address for VR4181
-
-// Bus Control Unit (BCU)
-#define VR4181_BCUCNTREG1	__preg16(KSEG1 + 0x0A000000)	/* BCU control register 1 (R/W) */
-#define VR4181_CMUCLKMSK	__preg16(KSEG1 + 0x0A000004)	/* Clock mask register (R/W) */
-#define VR4181_CMUCLKMSK_MSKCSUPCLK  0x0040
-#define VR4181_CMUCLKMSK_MSKAIUPCLK  0x0020
-#define VR4181_CMUCLKMSK_MSKPIUPCLK  0x0010
-#define VR4181_CMUCLKMSK_MSKADUPCLK  0x0008
-#define VR4181_CMUCLKMSK_MSKSIU18M   0x0004
-#define VR4181_CMUCLKMSK_MSKADU18M   0x0002
-#define VR4181_CMUCLKMSK_MSKUSB      0x0001
-#define VR4181_CMUCLKMSK_MSKSIU      VR4181_CMUCLKMSK_MSKSIU18M
-#define VR4181_BCUSPEEDREG	__preg16(KSEG1 + 0x0A00000C)	/* BCU access time parameter (R/W) */
-#define VR4181_BCURFCNTREG	__preg16(KSEG1 + 0x0A000010)	/* BCU refresh control register (R/W) */
-#define VR4181_REVIDREG		__preg16(KSEG1 + 0x0A000014)	/* Revision ID register (R) */
-#define VR4181_CLKSPEEDREG	__preg16(KSEG1 + 0x0A000018)	/* Clock speed register (R) */
-#define VR4181_EDOMCYTREG	__preg16(KSEG1 + 0x0A000300)	/* Memory cycle timing register (R/W) */
-#define VR4181_MEMCFG_REG	__preg16(KSEG1 + 0x0A000304)	/* Memory configuration register (R/W) */
-#define VR4181_MODE_REG		__preg16(KSEG1 + 0x0A000308)	/* SDRAM mode register (R/W) */
-#define VR4181_SDTIMINGREG	__preg16(KSEG1 + 0x0A00030C)	/* SDRAM timing register (R/W) */
-
-// DMA Control Unit (DCU)
-#define VR4181_MICDEST1REG1	__preg16(KSEG1 + 0x0A000020)	/* Microphone destination 1 address register 1 (R/W) */
-#define VR4181_MICDEST1REG2	__preg16(KSEG1 + 0x0A000022)	/* Microphone destination 1 address register 2 (R/W) */
-#define VR4181_MICDEST2REG1	__preg16(KSEG1 + 0x0A000024)	/* Microphone destination 2 address register 1 (R/W) */
-#define VR4181_MICDEST2REG2	__preg16(KSEG1 + 0x0A000026)	/* Microphone destination 2 address register 2 (R/W) */
-#define VR4181_SPKRRC1REG1	__preg16(KSEG1 + 0x0A000028)	/* Speaker Source 1 address register 1 (R/W) */
-#define VR4181_SPKRRC1REG2	__preg16(KSEG1 + 0x0A00002A)	/* Speaker Source 1 address register 2 (R/W) */
-#define VR4181_SPKRRC2REG1	__preg16(KSEG1 + 0x0A00002C)	/* Speaker Source 2 address register 1 (R/W) */
-#define VR4181_SPKRRC2REG2	__preg16(KSEG1 + 0x0A00002E)	/* Speaker Source 2 address register 2 (R/W) */
-#define VR4181_DMARSTREG	__preg16(KSEG1 + 0x0A000040)	/* DMA Reset register (R/W) */
-#define VR4181_AIUDMAMSKREG	__preg16(KSEG1 + 0x0A000046)	/* Audio DMA mask register (R/W) */
-#define VR4181_USBDMAMSKREG	__preg16(KSEG1 + 0x0A000600)	/* USB DMA Mask register (R/W) */
-#define VR4181_USBRXS1AREG1	__preg16(KSEG1 + 0x0A000602)	/* USB Rx source 1 address register 1 (R/W) */
-#define VR4181_USBRXS1AREG2	__preg16(KSEG1 + 0x0A000604)	/* USB Rx source 1 address register 2 (R/W) */
-#define VR4181_USBRXS2AREG1	__preg16(KSEG1 + 0x0A000606)	/* USB Rx source 2 address register 1 (R/W) */
-#define VR4181_USBRXS2AREG2	__preg16(KSEG1 + 0x0A000608)	/* USB Rx source 2 address register 2 (R/W) */
-#define VR4181_USBTXS1AREG1	__preg16(KSEG1 + 0x0A00060A)	/* USB Tx source 1 address register 1 (R/W) */
-#define VR4181_USBTXS1AREG2	__preg16(KSEG1 + 0x0A00060C)	/* USB Tx source 1 address register 2 (R/W) */
-#define VR4181_USBTXS2AREG1	__preg16(KSEG1 + 0x0A00060E)	/* USB Tx source 2 address register 1 (R/W) */
-#define VR4181_USBTXS2AREG2	__preg16(KSEG1 + 0x0A000610)	/* USB Tx source 2 address register 2 (R/W) */
-#define VR4181_USBRXD1AREG1	__preg16(KSEG1 + 0x0A00062A)	/* USB Rx destination 1 address register 1 (R/W) */
-#define VR4181_USBRXD1AREG2	__preg16(KSEG1 + 0x0A00062C)	/* USB Rx destination 1 address register 2 (R/W) */
-#define VR4181_USBRXD2AREG1	__preg16(KSEG1 + 0x0A00062E)	/* USB Rx destination 2 address register 1 (R/W) */
-#define VR4181_USBRXD2AREG2	__preg16(KSEG1 + 0x0A000630)	/* USB Rx destination 2 address register 2 (R/W) */
-#define VR4181_USBTXD1AREG1	__preg16(KSEG1 + 0x0A000632)	/* USB Tx destination 1 address register 1 (R/W) */
-#define VR4181_USBTXD1AREG2	__preg16(KSEG1 + 0x0A000634)	/* USB Tx destination 1 address register 2 (R/W) */
-#define VR4181_USBTXD2AREG1	__preg16(KSEG1 + 0x0A000636)	/* USB Tx destination 2 address register 1 (R/W) */
-#define VR4181_USBTXD2AREG2	__preg16(KSEG1 + 0x0A000638)	/* USB Tx destination 2 address register 2 (R/W) */
-#define VR4181_RxRCLENREG	__preg16(KSEG1 + 0x0A000652)	/* USB Rx record length register (R/W) */
-#define VR4181_TxRCLENREG	__preg16(KSEG1 + 0x0A000654)	/* USB Tx record length register (R/W) */
-#define VR4181_MICRCLENREG	__preg16(KSEG1 + 0x0A000658)	/* Microphone record length register (R/W) */
-#define VR4181_SPKRCLENREG	__preg16(KSEG1 + 0x0A00065A)	/* Speaker record length register (R/W) */
-#define VR4181_USBCFGREG	__preg16(KSEG1 + 0x0A00065C)	/* USB configuration register (R/W) */
-#define VR4181_MICDMACFGREG	__preg16(KSEG1 + 0x0A00065E)	/* Microphone DMA configuration register (R/W) */
-#define VR4181_SPKDMACFGREG	__preg16(KSEG1 + 0x0A000660)	/* Speaker DMA configuration register (R/W) */
-#define VR4181_DMAITRQREG	__preg16(KSEG1 + 0x0A000662)	/* DMA interrupt request register (R/W) */
-#define VR4181_DMACLTREG	__preg16(KSEG1 + 0x0A000664)	/* DMA control register (R/W) */
-#define VR4181_DMAITMKREG	__preg16(KSEG1 + 0x0A000666)	/* DMA interrupt mask register (R/W) */
-
-// ISA Bridge
-#define VR4181_ISABRGCTL	__preg16(KSEG1 + 0x0B0002C0)	/* ISA Bridge Control Register (R/W) */
-#define VR4181_ISABRGSTS	__preg16(KSEG1 + 0x0B0002C2)	/* ISA Bridge Status Register (R/W) */
-#define VR4181_XISACTL		__preg16(KSEG1 + 0x0B0002C4)	/* External ISA Control Register (R/W) */
-
-// Clocked Serial Interface (CSI)
-#define VR4181_CSIMODE		__preg16(KSEG1 + 0x0B000900)	/* CSI Mode Register (R/W) */
-#define VR4181_CSIRXDATA	__preg16(KSEG1 + 0x0B000902)	/* CSI Receive Data Register (R) */
-#define VR4181_CSITXDATA	__preg16(KSEG1 + 0x0B000904)	/* CSI Transmit Data Register (R/W) */
-#define VR4181_CSILSTAT		__preg16(KSEG1 + 0x0B000906)	/* CSI Line Status Register (R/W) */
-#define VR4181_CSIINTMSK	__preg16(KSEG1 + 0x0B000908)	/* CSI Interrupt Mask Register (R/W) */
-#define VR4181_CSIINTSTAT	__preg16(KSEG1 + 0x0B00090a)	/* CSI Interrupt Status Register (R/W) */
-#define VR4181_CSITXBLEN	__preg16(KSEG1 + 0x0B00090c)	/* CSI Transmit Burst Length Register (R/W) */
-#define VR4181_CSIRXBLEN	__preg16(KSEG1 + 0x0B00090e)	/* CSI Receive Burst Length Register (R/W) */
-
-// Interrupt Control Unit (ICU)
-#define VR4181_SYSINT1REG	__preg16(KSEG1 + 0x0A000080)	/* Level 1 System interrupt register 1 (R) */
-#define VR4181_MSYSINT1REG	__preg16(KSEG1 + 0x0A00008C)	/* Level 1 mask system interrupt register 1 (R/W) */
-#define VR4181_NMIREG		__preg16(KSEG1 + 0x0A000098)	/* NMI register (R/W) */
-#define VR4181_SOFTINTREG	__preg16(KSEG1 + 0x0A00009A)	/* Software interrupt register (R/W) */
-#define VR4181_SYSINT2REG	__preg16(KSEG1 + 0x0A000200)	/* Level 1 System interrupt register 2 (R) */
-#define VR4181_MSYSINT2REG	__preg16(KSEG1 + 0x0A000206)	/* Level 1 mask system interrupt register 2 (R/W) */
-#define VR4181_PIUINTREGro	__preg16(KSEG1 + 0x0B000082)	/* Level 2 PIU interrupt register (R) */
-#define VR4181_AIUINTREG	__preg16(KSEG1 + 0x0B000084)	/* Level 2 AIU interrupt register (R) */
-#define VR4181_MPIUINTREG	__preg16(KSEG1 + 0x0B00008E)	/* Level 2 mask PIU interrupt register (R/W) */
-#define VR4181_MAIUINTREG	__preg16(KSEG1 + 0x0B000090)	/* Level 2 mask AIU interrupt register (R/W) */
-#define VR4181_MKIUINTREG	__preg16(KSEG1 + 0x0B000092)	/* Level 2 mask KIU interrupt register (R/W) */
-#define VR4181_KIUINTREG	__preg16(KSEG1 + 0x0B000198)	/* Level 2 KIU interrupt register (R) */
-
-// Power Management Unit (PMU)
-#define VR4181_PMUINTREG	__preg16(KSEG1 + 0x0B0000A0)	/* PMU Status Register (R/W) */
-#define VR4181_PMUINT_POWERSW  0x1	/* Power switch */
-#define VR4181_PMUINT_BATT     0x2	/* Low batt during normal operation */
-#define VR4181_PMUINT_DEADMAN  0x4	/* Deadman's switch */
-#define VR4181_PMUINT_RESET    0x8	/* Reset switch */
-#define VR4181_PMUINT_RTCRESET 0x10	/* RTC Reset */
-#define VR4181_PMUINT_TIMEOUT  0x20	/* HAL Timer Reset */
-#define VR4181_PMUINT_BATTLOW  0x100	/* Battery low */
-#define VR4181_PMUINT_RTC      0x200	/* RTC Alarm */
-#define VR4181_PMUINT_DCD      0x400	/* DCD# */
-#define VR4181_PMUINT_GPIO0    0x1000	/* GPIO0 */
-#define VR4181_PMUINT_GPIO1    0x2000	/* GPIO1 */
-#define VR4181_PMUINT_GPIO2    0x4000	/* GPIO2 */
-#define VR4181_PMUINT_GPIO3    0x8000	/* GPIO3 */
-
-#define VR4181_PMUCNTREG	__preg16(KSEG1 + 0x0B0000A2)	/* PMU Control Register (R/W) */
-#define VR4181_PMUWAITREG	__preg16(KSEG1 + 0x0B0000A8)	/* PMU Wait Counter Register (R/W) */
-#define VR4181_PMUDIVREG	__preg16(KSEG1 + 0x0B0000AC)	/* PMU Divide Mode Register (R/W) */
-#define VR4181_DRAMHIBCTL	__preg16(KSEG1 + 0x0B0000B2)	/* DRAM Hibernate Control Register (R/W) */
-
-// Real Time Clock Unit (RTC)
-#define VR4181_ETIMELREG	__preg16(KSEG1 + 0x0B0000C0)	/* Elapsed Time L Register (R/W) */
-#define VR4181_ETIMEMREG	__preg16(KSEG1 + 0x0B0000C2)	/* Elapsed Time M Register (R/W) */
-#define VR4181_ETIMEHREG	__preg16(KSEG1 + 0x0B0000C4)	/* Elapsed Time H Register (R/W) */
-#define VR4181_ECMPLREG		__preg16(KSEG1 + 0x0B0000C8)	/* Elapsed Compare L Register (R/W) */
-#define VR4181_ECMPMREG		__preg16(KSEG1 + 0x0B0000CA)	/* Elapsed Compare M Register (R/W) */
-#define VR4181_ECMPHREG		__preg16(KSEG1 + 0x0B0000CC)	/* Elapsed Compare H Register (R/W) */
-#define VR4181_RTCL1LREG	__preg16(KSEG1 + 0x0B0000D0)	/* RTC Long 1 L Register (R/W) */
-#define VR4181_RTCL1HREG	__preg16(KSEG1 + 0x0B0000D2)	/* RTC Long 1 H Register (R/W) */
-#define VR4181_RTCL1CNTLREG	__preg16(KSEG1 + 0x0B0000D4)	/* RTC Long 1 Count L Register (R) */
-#define VR4181_RTCL1CNTHREG	__preg16(KSEG1 + 0x0B0000D6)	/* RTC Long 1 Count H Register (R) */
-#define VR4181_RTCL2LREG	__preg16(KSEG1 + 0x0B0000D8)	/* RTC Long 2 L Register (R/W) */
-#define VR4181_RTCL2HREG	__preg16(KSEG1 + 0x0B0000DA)	/* RTC Long 2 H Register (R/W) */
-#define VR4181_RTCL2CNTLREG	__preg16(KSEG1 + 0x0B0000DC)	/* RTC Long 2 Count L Register (R) */
-#define VR4181_RTCL2CNTHREG	__preg16(KSEG1 + 0x0B0000DE)	/* RTC Long 2 Count H Register (R) */
-#define VR4181_RTCINTREG	__preg16(KSEG1 + 0x0B0001DE)	/* RTC Interrupt Register (R/W) */
-
-// Deadman's Switch Unit (DSU)
-#define VR4181_DSUCNTREG	__preg16(KSEG1 + 0x0B0000E0)	/* DSU Control Register (R/W) */
-#define VR4181_DSUSETREG	__preg16(KSEG1 + 0x0B0000E2)	/* DSU Dead Time Set Register (R/W) */
-#define VR4181_DSUCLRREG	__preg16(KSEG1 + 0x0B0000E4)	/* DSU Clear Register (W) */
-#define VR4181_DSUTIMREG	__preg16(KSEG1 + 0x0B0000E6)	/* DSU Elapsed Time Register (R/W) */
-
-// General Purpose I/O Unit (GIU)
-#define VR4181_GPMD0REG		__preg16(KSEG1 + 0x0B000300)	/* GPIO Mode 0 Register (R/W) */
-#define VR4181_GPMD1REG		__preg16(KSEG1 + 0x0B000302)	/* GPIO Mode 1 Register (R/W) */
-#define VR4181_GPMD2REG		__preg16(KSEG1 + 0x0B000304)	/* GPIO Mode 2 Register (R/W) */
-#define VR4181_GPMD3REG		__preg16(KSEG1 + 0x0B000306)	/* GPIO Mode 3 Register (R/W) */
-#define VR4181_GPDATHREG	__preg16(KSEG1 + 0x0B000308)	/* GPIO Data High Register (R/W) */
-#define VR4181_GPDATHREG_GPIO16  0x0001
-#define VR4181_GPDATHREG_GPIO17  0x0002
-#define VR4181_GPDATHREG_GPIO18  0x0004
-#define VR4181_GPDATHREG_GPIO19  0x0008
-#define VR4181_GPDATHREG_GPIO20  0x0010
-#define VR4181_GPDATHREG_GPIO21  0x0020
-#define VR4181_GPDATHREG_GPIO22  0x0040
-#define VR4181_GPDATHREG_GPIO23  0x0080
-#define VR4181_GPDATHREG_GPIO24  0x0100
-#define VR4181_GPDATHREG_GPIO25  0x0200
-#define VR4181_GPDATHREG_GPIO26  0x0400
-#define VR4181_GPDATHREG_GPIO27  0x0800
-#define VR4181_GPDATHREG_GPIO28  0x1000
-#define VR4181_GPDATHREG_GPIO29  0x2000
-#define VR4181_GPDATHREG_GPIO30  0x4000
-#define VR4181_GPDATHREG_GPIO31  0x8000
-#define VR4181_GPDATLREG	__preg16(KSEG1 + 0x0B00030A)	/* GPIO Data Low Register (R/W) */
-#define VR4181_GPDATLREG_GPIO0   0x0001
-#define VR4181_GPDATLREG_GPIO1   0x0002
-#define VR4181_GPDATLREG_GPIO2   0x0004
-#define VR4181_GPDATLREG_GPIO3   0x0008
-#define VR4181_GPDATLREG_GPIO4   0x0010
-#define VR4181_GPDATLREG_GPIO5   0x0020
-#define VR4181_GPDATLREG_GPIO6   0x0040
-#define VR4181_GPDATLREG_GPIO7   0x0080
-#define VR4181_GPDATLREG_GPIO8   0x0100
-#define VR4181_GPDATLREG_GPIO9   0x0200
-#define VR4181_GPDATLREG_GPIO10  0x0400
-#define VR4181_GPDATLREG_GPIO11  0x0800
-#define VR4181_GPDATLREG_GPIO12  0x1000
-#define VR4181_GPDATLREG_GPIO13  0x2000
-#define VR4181_GPDATLREG_GPIO14  0x4000
-#define VR4181_GPDATLREG_GPIO15  0x8000
-#define VR4181_GPINTEN		__preg16(KSEG1 + 0x0B00030C)	/* GPIO Interrupt Enable Register (R/W) */
-#define VR4181_GPINTMSK		__preg16(KSEG1 + 0x0B00030E)	/* GPIO Interrupt Mask Register (R/W) */
-#define VR4181_GPINTTYPH	__preg16(KSEG1 + 0x0B000310)	/* GPIO Interrupt Type High Register (R/W) */
-#define VR4181_GPINTTYPL	__preg16(KSEG1 + 0x0B000312)	/* GPIO Interrupt Type Low Register (R/W) */
-#define VR4181_GPINTSTAT	__preg16(KSEG1 + 0x0B000314)	/* GPIO Interrupt Status Register (R/W) */
-#define VR4181_GPHIBSTH		__preg16(KSEG1 + 0x0B000316)	/* GPIO Hibernate Pin State High Register (R/W) */
-#define VR4181_GPHIBSTL		__preg16(KSEG1 + 0x0B000318)	/* GPIO Hibernate Pin State Low Register (R/W) */
-#define VR4181_GPSICTL		__preg16(KSEG1 + 0x0B00031A)	/* GPIO Serial Interface Control Register (R/W) */
-#define VR4181_KEYEN		__preg16(KSEG1 + 0x0B00031C)	/* Keyboard Scan Pin Enable Register (R/W) */
-#define VR4181_PCS0STRA		__preg16(KSEG1 + 0x0B000320)	/* Programmable Chip Select [0] Start Address Register (R/W) */
-#define VR4181_PCS0STPA		__preg16(KSEG1 + 0x0B000322)	/* Programmable Chip Select [0] Stop Address Register (R/W) */
-#define VR4181_PCS0HIA		__preg16(KSEG1 + 0x0B000324)	/* Programmable Chip Select [0] High Address Register (R/W) */
-#define VR4181_PCS1STRA		__preg16(KSEG1 + 0x0B000326)	/* Programmable Chip Select [1] Start Address Register (R/W) */
-#define VR4181_PCS1STPA		__preg16(KSEG1 + 0x0B000328)	/* Programmable Chip Select [1] Stop Address Register (R/W) */
-#define VR4181_PCS1HIA		__preg16(KSEG1 + 0x0B00032A)	/* Programmable Chip Select [1] High Address Register (R/W) */
-#define VR4181_PCSMODE		__preg16(KSEG1 + 0x0B00032C)	/* Programmable Chip Select Mode Register (R/W) */
-#define VR4181_LCDGPMODE	__preg16(KSEG1 + 0x0B00032E)	/* LCD General Purpose Mode Register (R/W) */
-#define VR4181_MISCREG0		__preg16(KSEG1 + 0x0B000330)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG1		__preg16(KSEG1 + 0x0B000332)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG2		__preg16(KSEG1 + 0x0B000334)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG3		__preg16(KSEG1 + 0x0B000336)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG4		__preg16(KSEG1 + 0x0B000338)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG5		__preg16(KSEG1 + 0x0B00033A)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG6		__preg16(KSEG1 + 0x0B00033C)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG7		__preg16(KSEG1 + 0x0B00033D)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG8		__preg16(KSEG1 + 0x0B000340)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG9		__preg16(KSEG1 + 0x0B000342)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG10	__preg16(KSEG1 + 0x0B000344)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG11	__preg16(KSEG1 + 0x0B000346)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG12	__preg16(KSEG1 + 0x0B000348)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG13	__preg16(KSEG1 + 0x0B00034A)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG14	__preg16(KSEG1 + 0x0B00034C)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_MISCREG15	__preg16(KSEG1 + 0x0B00034E)	/* Misc. R/W Battery Backed Registers for Non-Volatile Storage (R/W) */
-#define VR4181_SECIRQMASKL	VR4181_GPINTEN
-// No SECIRQMASKH for VR4181
-
-// Touch Panel Interface Unit (PIU)
-#define VR4181_PIUCNTREG	__preg16(KSEG1 + 0x0B000122)	/* PIU Control register (R/W) */
-#define VR4181_PIUCNTREG_PIUSEQEN	0x0004
-#define VR4181_PIUCNTREG_PIUPWR		0x0002
-#define VR4181_PIUCNTREG_PADRST		0x0001
-
-#define VR4181_PIUINTREG	__preg16(KSEG1 + 0x0B000124)	/* PIU Interrupt cause register (R/W) */
-#define VR4181_PIUINTREG_OVP		0x8000
-#define VR4181_PIUINTREG_PADCMD		0x0040
-#define VR4181_PIUINTREG_PADADP		0x0020
-#define VR4181_PIUINTREG_PADPAGE1	0x0010
-#define VR4181_PIUINTREG_PADPAGE0	0x0008
-#define VR4181_PIUINTREG_PADDLOST	0x0004
-#define VR4181_PIUINTREG_PENCHG		0x0001
-
-#define VR4181_PIUSIVLREG	__preg16(KSEG1 + 0x0B000126)	/* PIU Data sampling interval register (R/W) */
-#define VR4181_PIUSTBLREG	__preg16(KSEG1 + 0x0B000128)	/* PIU A/D converter start delay register (R/W) */
-#define VR4181_PIUCMDREG	__preg16(KSEG1 + 0x0B00012A)	/* PIU A/D command register (R/W) */
-#define VR4181_PIUASCNREG	__preg16(KSEG1 + 0x0B000130)	/* PIU A/D port scan register (R/W) */
-#define VR4181_PIUAMSKREG	__preg16(KSEG1 + 0x0B000132)	/* PIU A/D scan mask register (R/W) */
-#define VR4181_PIUCIVLREG	__preg16(KSEG1 + 0x0B00013E)	/* PIU Check interval register (R) */
-#define VR4181_PIUPB00REG	__preg16(KSEG1 + 0x0B0002A0)	/* PIU Page 0 Buffer 0 register (R/W) */
-#define VR4181_PIUPB01REG	__preg16(KSEG1 + 0x0B0002A2)	/* PIU Page 0 Buffer 1 register (R/W) */
-#define VR4181_PIUPB02REG	__preg16(KSEG1 + 0x0B0002A4)	/* PIU Page 0 Buffer 2 register (R/W) */
-#define VR4181_PIUPB03REG	__preg16(KSEG1 + 0x0B0002A6)	/* PIU Page 0 Buffer 3 register (R/W) */
-#define VR4181_PIUPB10REG	__preg16(KSEG1 + 0x0B0002A8)	/* PIU Page 1 Buffer 0 register (R/W) */
-#define VR4181_PIUPB11REG	__preg16(KSEG1 + 0x0B0002AA)	/* PIU Page 1 Buffer 1 register (R/W) */
-#define VR4181_PIUPB12REG	__preg16(KSEG1 + 0x0B0002AC)	/* PIU Page 1 Buffer 2 register (R/W) */
-#define VR4181_PIUPB13REG	__preg16(KSEG1 + 0x0B0002AE)	/* PIU Page 1 Buffer 3 register (R/W) */
-#define VR4181_PIUAB0REG	__preg16(KSEG1 + 0x0B0002B0)	/* PIU A/D scan Buffer 0 register (R/W) */
-#define VR4181_PIUAB1REG	__preg16(KSEG1 + 0x0B0002B2)	/* PIU A/D scan Buffer 1 register (R/W) */
-#define VR4181_PIUAB2REG	__preg16(KSEG1 + 0x0B0002B4)	/* PIU A/D scan Buffer 2 register (R/W) */
-#define VR4181_PIUAB3REG	__preg16(KSEG1 + 0x0B0002B6)	/* PIU A/D scan Buffer 3 register (R/W) */
-#define VR4181_PIUPB04REG	__preg16(KSEG1 + 0x0B0002BC)	/* PIU Page 0 Buffer 4 register (R/W) */
-#define VR4181_PIUPB14REG	__preg16(KSEG1 + 0x0B0002BE)	/* PIU Page 1 Buffer 4 register (R/W) */
-
-// Audio Interface Unit (AIU)
-#define VR4181_SODATREG		__preg16(KSEG1 + 0x0B000166)	/* Speaker Output Data Register (R/W) */
-#define VR4181_SCNTREG		__preg16(KSEG1 + 0x0B000168)	/* Speaker Output Control Register (R/W) */
-#define VR4181_MIDATREG		__preg16(KSEG1 + 0x0B000170)	/* Mike Input Data Register (R/W) */
-#define VR4181_MCNTREG		__preg16(KSEG1 + 0x0B000172)	/* Mike Input Control Register (R/W) */
-#define VR4181_DVALIDREG	__preg16(KSEG1 + 0x0B000178)	/* Data Valid Register (R/W) */
-#define VR4181_SEQREG		__preg16(KSEG1 + 0x0B00017A)	/* Sequential Register (R/W) */
-#define VR4181_INTREG		__preg16(KSEG1 + 0x0B00017C)	/* Interrupt Register (R/W) */
-#define VR4181_SDMADATREG	__preg16(KSEG1 + 0x0B000160)	/* Speaker DMA Data Register (R/W) */
-#define VR4181_MDMADATREG	__preg16(KSEG1 + 0x0B000162)	/* Microphone DMA Data Register (R/W) */
-#define VR4181_DAVREF_SETUP	__preg16(KSEG1 + 0x0B000164)	/* DAC Vref setup register (R/W) */
-#define VR4181_SCNVC_END	__preg16(KSEG1 + 0x0B00016E)	/* Speaker sample rate control (R/W) */
-#define VR4181_MIDATREG		__preg16(KSEG1 + 0x0B000170)	/* Microphone Input Data Register (R/W) */
-#define VR4181_MCNTREG		__preg16(KSEG1 + 0x0B000172)	/* Microphone Input Control Register (R/W) */
-#define VR4181_MCNVC_END	__preg16(KSEG1 + 0x0B00017E)	/* Microphone sample rate control (R/W) */
-
-// Keyboard Interface Unit (KIU)
-#define VR4181_KIUDAT0		__preg16(KSEG1 + 0x0B000180)	/* KIU Data0 Register (R/W) */
-#define VR4181_KIUDAT1		__preg16(KSEG1 + 0x0B000182)	/* KIU Data1 Register (R/W) */
-#define VR4181_KIUDAT2		__preg16(KSEG1 + 0x0B000184)	/* KIU Data2 Register (R/W) */
-#define VR4181_KIUDAT3		__preg16(KSEG1 + 0x0B000186)	/* KIU Data3 Register (R/W) */
-#define VR4181_KIUDAT4		__preg16(KSEG1 + 0x0B000188)	/* KIU Data4 Register (R/W) */
-#define VR4181_KIUDAT5		__preg16(KSEG1 + 0x0B00018A)	/* KIU Data5 Register (R/W) */
-#define VR4181_KIUSCANREP	__preg16(KSEG1 + 0x0B000190)	/* KIU Scan/Repeat Register (R/W) */
-#define VR4181_KIUSCANREP_KEYEN      0x8000
-#define VR4181_KIUSCANREP_SCANSTP    0x0008
-#define VR4181_KIUSCANREP_SCANSTART  0x0004
-#define VR4181_KIUSCANREP_ATSTP      0x0002
-#define VR4181_KIUSCANREP_ATSCAN     0x0001
-#define VR4181_KIUSCANS		__preg16(KSEG1 + 0x0B000192)	/* KIU Scan Status Register (R) */
-#define VR4181_KIUWKS		__preg16(KSEG1 + 0x0B000194)	/* KIU Wait Keyscan Stable Register (R/W) */
-#define VR4181_KIUWKI		__preg16(KSEG1 + 0x0B000196)	/* KIU Wait Keyscan Interval Register (R/W) */
-#define VR4181_KIUINT		__preg16(KSEG1 + 0x0B000198)	/* KIU Interrupt Register (R/W) */
-#define VR4181_KIUINT_KDATLOST       0x0004
-#define VR4181_KIUINT_KDATRDY        0x0002
-#define VR4181_KIUINT_SCANINT        0x0001
-#define VR4181_KIUDAT6		__preg16(KSEG1 + 0x0B00018C)	/* Scan Line 6 Key Data Register (R) */
-#define VR4181_KIUDAT7		__preg16(KSEG1 + 0x0B00018E)	/* Scan Line 7 Key Data Register (R) */
-
-// CompactFlash Controller
-#define VR4181_PCCARDINDEX	__preg8(KSEG1 + 0x0B0008E0)	/* PC Card Controller Index Register */
-#define VR4181_PCCARDDATA	__preg8(KSEG1 + 0x0B0008E1)	/* PC Card Controller Data Register */
-#define VR4181_INTSTATREG	__preg16(KSEG1 + 0x0B0008F8)	/* Interrupt Status Register (R/W) */
-#define VR4181_INTMSKREG	__preg16(KSEG1 + 0x0B0008FA)	/* Interrupt Mask Register (R/W) */
-#define VR4181_CFG_REG_1	__preg16(KSEG1 + 0x0B0008FE)	/* Configuration Register 1 */
-
-// LED Control Unit (LED)
-#define VR4181_LEDHTSREG	__preg16(KSEG1 + 0x0B000240)	/* LED H Time Set register (R/W) */
-#define VR4181_LEDLTSREG	__preg16(KSEG1 + 0x0B000242)	/* LED L Time Set register (R/W) */
-#define VR4181_LEDCNTREG	__preg16(KSEG1 + 0x0B000248)	/* LED Control register (R/W) */
-#define VR4181_LEDASTCREG	__preg16(KSEG1 + 0x0B00024A)	/* LED Auto Stop Time Count register (R/W) */
-#define VR4181_LEDINTREG	__preg16(KSEG1 + 0x0B00024C)	/* LED Interrupt register (R/W) */
-
-// Serial Interface Unit (SIU / SIU1 and SIU2)
-#define VR4181_SIURB		__preg8(KSEG1 + 0x0C000010)	/* Receiver Buffer Register (Read) DLAB = 0 (R) */
-#define VR4181_SIUTH		__preg8(KSEG1 + 0x0C000010)	/* Transmitter Holding Register (Write) DLAB = 0 (W) */
-#define VR4181_SIUDLL		__preg8(KSEG1 + 0x0C000010)	/* Divisor Latch (Least Significant Byte) DLAB = 1 (R/W) */
-#define VR4181_SIUIE		__preg8(KSEG1 + 0x0C000011)	/* Interrupt Enable DLAB = 0 (R/W) */
-#define VR4181_SIUDLM		__preg8(KSEG1 + 0x0C000011)	/* Divisor Latch (Most Significant Byte) DLAB = 1 (R/W) */
-#define VR4181_SIUIID		__preg8(KSEG1 + 0x0C000012)	/* Interrupt Identification Register (Read) (R) */
-#define VR4181_SIUFC		__preg8(KSEG1 + 0x0C000012)	/* FIFO Control Register (Write) (W) */
-#define VR4181_SIULC		__preg8(KSEG1 + 0x0C000013)	/* Line Control Register (R/W) */
-#define VR4181_SIUMC		__preg8(KSEG1 + 0x0C000014)	/* MODEM Control Register (R/W) */
-#define VR4181_SIULS		__preg8(KSEG1 + 0x0C000015)	/* Line Status Register (R/W) */
-#define VR4181_SIUMS		__preg8(KSEG1 + 0x0C000016)	/* MODEM Status Register (R/W) */
-#define VR4181_SIUSC		__preg8(KSEG1 + 0x0C000017)	/* Scratch Register (R/W) */
-#define VR4181_SIURESET		__preg8(KSEG1 + 0x0C000019)	/* SIU Reset Register (R/W) */
-#define VR4181_SIUACTMSK	__preg8(KSEG1 + 0x0C00001C)	/* SIU Activity Mask (R/W) */
-#define VR4181_SIUACTTMR	__preg8(KSEG1 + 0x0C00001E)	/* SIU Activity Timer (R/W) */
-#define VR4181_SIURB_2		__preg8(KSEG1 + 0x0C000000)	/* Receive Buffer Register (Read) (R) */
-#define VR4181_SIUTH_2		__preg8(KSEG1 + 0x0C000000)	/* Transmitter Holding Register (Write) (W) */
-#define VR4181_SIUDLL_2		__preg8(KSEG1 + 0x0C000000)	/* Divisor Latch (Least Significant Byte) (R/W) */
-#define VR4181_SIUIE_2		__preg8(KSEG1 + 0x0C000001)	/* Interrupt Enable (DLAB = 0) (R/W) */
-#define VR4181_SIUDLM_2		__preg8(KSEG1 + 0x0C000001)	/* Divisor Latch (Most Significant Byte) (DLAB = 1) (R/W) */
-#define VR4181_SIUIID_2		__preg8(KSEG1 + 0x0C000002)	/* Interrupt Identification Register (Read) (R) */
-#define VR4181_SIUFC_2		__preg8(KSEG1 + 0x0C000002)	/* FIFO Control Register (Write) (W) */
-#define VR4181_SIULC_2		__preg8(KSEG1 + 0x0C000003)	/* Line Control Register (R/W) */
-#define VR4181_SIUMC_2		__preg8(KSEG1 + 0x0C000004)	/* Modem Control Register (R/W) */
-#define VR4181_SIULS_2		__preg8(KSEG1 + 0x0C000005)	/* Line Status Register (R/W) */
-#define VR4181_SIUMS_2		__preg8(KSEG1 + 0x0C000006)	/* Modem Status Register (R/W) */
-#define VR4181_SIUSC_2		__preg8(KSEG1 + 0x0C000007)	/* Scratch Register (R/W) */
-#define VR4181_SIUIRSEL_2	__preg8(KSEG1 + 0x0C000008)	/* SIU IrDA Selectot (R/W) */
-#define VR4181_SIURESET_2	__preg8(KSEG1 + 0x0C000009)	/* SIU Reset Register (R/W) */
-#define VR4181_SIUCSEL_2	__preg8(KSEG1 + 0x0C00000A)	/* IrDA Echo-back Control (R/W) */
-#define VR4181_SIUACTMSK_2	__preg8(KSEG1 + 0x0C00000C)	/* SIU Activity Mask Register (R/W) */
-#define VR4181_SIUACTTMR_2	__preg8(KSEG1 + 0x0C00000E)	/* SIU Activity Timer Register (R/W) */
-
-
-// USB Module
-#define VR4181_USBINFIFO	__preg16(KSEG1 + 0x0B000780)	/* USB Bulk Input FIFO (Bulk In End Point) (W) */
-#define VR4181_USBOUTFIFO	__preg16(KSEG1 + 0x0B000782)	/* USB Bulk Output FIFO (Bulk Out End Point) (R) */
-#define VR4181_USBCTLFIFO	__preg16(KSEG1 + 0x0B000784)	/* USB Control FIFO (Control End Point) (W) */
-#define VR4181_USBSTAT		__preg16(KSEG1 + 0x0B000786)	/* Interrupt Status Register (R/W) */
-#define VR4181_USBINTMSK	__preg16(KSEG1 + 0x0B000788)	/* Interrupt Mask Register (R/W) */
-#define VR4181_USBCTLREG	__preg16(KSEG1 + 0x0B00078A)	/* Control Register (R/W) */
-#define VR4181_USBSTPREG	__preg16(KSEG1 + 0x0B00078C)	/* USB Transfer Stop Register (R/W) */
-
-// LCD Controller
-#define VR4181_HRTOTALREG	__preg16(KSEG1 + 0x0A000400)	/* Horizontal total Register (R/W) */
-#define VR4181_HRVISIBREG	__preg16(KSEG1 + 0x0A000402)	/* Horizontal Visible Register (R/W) */
-#define VR4181_LDCLKSTREG	__preg16(KSEG1 + 0x0A000404)	/* Load clock start Register (R/W) */
-#define VR4181_LDCLKNDREG	__preg16(KSEG1 + 0x0A000406)	/* Load clock end Register (R/W) */
-#define VR4181_VRTOTALREG	__preg16(KSEG1 + 0x0A000408)	/* Vertical Total Register (R/W) */
-#define VR4181_VRVISIBREG	__preg16(KSEG1 + 0x0A00040A)	/* Vertical Visible Register (R/W) */
-#define VR4181_FVSTARTREG	__preg16(KSEG1 + 0x0A00040C)	/* FLM vertical start Register (R/W) */
-#define VR4181_FVENDREG		__preg16(KSEG1 + 0x0A00040E)	/* FLM vertical end Register (R/W) */
-#define VR4181_LCDCTRLREG	__preg16(KSEG1 + 0x0A000410)	/* LCD control Register (R/W) */
-#define VR4181_LCDINRQREG	__preg16(KSEG1 + 0x0A000412)	/* LCD Interrupt request Register (R/W) */
-#define VR4181_LCDCFGREG0	__preg16(KSEG1 + 0x0A000414)	/* LCD Configuration Register 0 (R/W) */
-#define VR4181_LCDCFGREG1	__preg16(KSEG1 + 0x0A000416)	/* LCD Configuration Register 1 (R/W) */
-#define VR4181_FBSTAD1REG	__preg16(KSEG1 + 0x0A000418)	/* Frame Buffer Start Address 1 Register (R/W) */
-#define VR4181_FBSTAD2REG	__preg16(KSEG1 + 0x0A00041A)	/* Frame Buffer Start Address 2 Register (R/W) */
-#define VR4181_FBNDAD1REG	__preg16(KSEG1 + 0x0A000420)	/* Frame Buffer End Address 1 Register (R/W) */
-#define VR4181_FBNDAD2REG	__preg16(KSEG1 + 0x0A000422)	/* Frame Buffer End Address 2 register (R/W) */
-#define VR4181_FHSTARTREG	__preg16(KSEG1 + 0x0A000424)	/* FLM horizontal Start Register (R/W) */
-#define VR4181_FHENDREG		__preg16(KSEG1 + 0x0A000426)	/* FLM horizontal End Register (R/W) */
-#define VR4181_PWRCONREG1	__preg16(KSEG1 + 0x0A000430)	/* Power Control register 1 (R/W) */
-#define VR4181_PWRCONREG2	__preg16(KSEG1 + 0x0A000432)	/* Power Control register 2 (R/W) */
-#define VR4181_LCDIMSKREG	__preg16(KSEG1 + 0x0A000434)	/* LCD Interrupt Mask register (R/W) */
-#define VR4181_CPINDCTREG	__preg16(KSEG1 + 0x0A00047E)	/* Color palette Index and control Register (R/W) */
-#define VR4181_CPALDATREG	__preg32(KSEG1 + 0x0A000480)	/* Color palette data register (32bits Register) (R/W) */
-
-// physical address spaces
-#define VR4181_LCD             0x0a000000
-#define VR4181_INTERNAL_IO_2   0x0b000000
-#define VR4181_INTERNAL_IO_1   0x0c000000
-#define VR4181_ISA_MEM         0x10000000
-#define VR4181_ISA_IO          0x14000000
-#define VR4181_ROM             0x18000000
-
-// This is the base address for IO port decoding to which the 16 bit IO port address
-// is added.  Defining it to 0 will usually cause a kernel oops any time port IO is
-// attempted, which can be handy for turning up parts of the kernel that make
-// incorrect architecture assumptions (by assuming that everything acts like a PC),
-// but we need it correctly defined to use the PCMCIA/CF controller:
-#define VR4181_PORT_BASE	(KSEG1 + VR4181_ISA_IO)
-#define VR4181_ISAMEM_BASE	(KSEG1 + VR4181_ISA_MEM)
-
-#endif /* __ASM_VR4181_VR4181_H */