Merge tag 'qcom-soc-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/drivers

Merge "qcom SoC changes for v4.1" from Kumar Gala:

Qualcomm ARM Based SoC Updates for v4.1

* Merged the based Qualcomm SCM and SCM boot support
* Cleaned up SCM interface to only expose functional SCM APIs
* Moved Qualcomm SCM code into drivers/firmware
* Updated the SCM APIs for setting cpu cold and warm boot addresses
* Added support for ADM CRCI muxing

* tag 'qcom-soc-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
  soc: qcom: gsbi: Add support for ADM CRCI muxing
  firmware: qcom: scm: Support cpu power down through SCM
  firmware: qcom: scm: Add qcom_scm_set_warm_boot_addr function
  firmware: qcom: scm: Clean cold boot entry to export only the API
  firmware: qcom: scm: Move the scm driver to drivers/firmware
  ARM: qcom: Prep scm code for move to drivers/firmware
  ARM: qcom: Cleanup scm interface to only export what is needed
  ARM: qcom: Merge scm and scm boot code together

Signed-off-by: Olof Johansson <olof@lixom.net>

16 files changed, 708 insertions, 451 deletions

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
index 4ce24d425bf1..2f5ede39bea2 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
@@ -6,7 +6,8 @@ configuration settings.  The mode setting will govern the input/output mode of
 the 4 GSBI IOs.
 
 Required properties:
-- compatible: must contain "qcom,gsbi-v1.0.0" for APQ8064/IPQ8064
+- compatible:	Should contain "qcom,gsbi-v1.0.0"
+- cell-index:	Should contain the GSBI index
 - reg: Address range for GSBI registers
 - clocks: required clock
 - clock-names: must contain "iface" entry
@@ -16,6 +17,8 @@ Required properties:
 Optional properties:
 - qcom,crci : indicates CRCI MUX value for QUP CRCI ports.  Please reference
   dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
+- syscon-tcsr: indicates phandle of TCSR syscon node.  Required if child uses
+  dma.
 
 Required properties if child node exists:
 - #address-cells: Must be 1
@@ -39,6 +42,7 @@ Example for APQ8064:
 
 	gsbi4@16300000 {
 		compatible = "qcom,gsbi-v1.0.0";
+		cell-index = <4>;
 		reg = <0x16300000 0x100>;
 		clocks = <&gcc GSBI4_H_CLK>;
 		clock-names = "iface";
@@ -48,22 +52,24 @@ Example for APQ8064:
 		qcom,mode = <GSBI_PROT_I2C_UART>;
 		qcom,crci = <GSBI_CRCI_QUP>;
 
+		syscon-tcsr = <&tcsr>;
+
 		/* child nodes go under here */
 
 		i2c_qup4: i2c@16380000 {
-		        compatible = "qcom,i2c-qup-v1.1.1";
-		        reg = <0x16380000 0x1000>;
-		        interrupts = <0 153 0>;
+			compatible = "qcom,i2c-qup-v1.1.1";
+			reg = <0x16380000 0x1000>;
+			interrupts = <0 153 0>;
 
-		        clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
-		        clock-names = "core", "iface";
+			clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
+			clock-names = "core", "iface";
 
-		        clock-frequency = <200000>;
+			clock-frequency = <200000>;
 
-		        #address-cells = <1>;
-		        #size-cells = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
-		 };
+		};
 
 		uart4:	serial@16340000 {
 			compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
@@ -76,3 +82,7 @@ Example for APQ8064:
 		};
 	};
 
+	tcsr: syscon@1a400000 {
+		compatible = "qcom,apq8064-tcsr", "syscon";
+		reg = <0x1a400000 0x100>;
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index eaf999638a65..ad18cd135a87 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1317,6 +1317,7 @@ L:	linux-soc@vger.kernel.org
 S:	Maintained
 F:	arch/arm/mach-qcom/
 F:	drivers/soc/qcom/
+F:	drivers/firmware/qcom_scm.c
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git
 
 ARM/RADISYS ENP2611 MACHINE SUPPORT
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9f1f09a2bc9b..7ffd1518d2aa 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2160,6 +2160,8 @@ source "net/Kconfig"
 
 source "drivers/Kconfig"
 
+source "drivers/firmware/Kconfig"
+
 source "fs/Kconfig"
 
 source "arch/arm/Kconfig.debug"
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
index 48003ea652b9..2256cd1e25d1 100644
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -22,7 +22,4 @@ config ARCH_MSM8974
 	bool "Enable support for MSM8974"
 	select HAVE_ARM_ARCH_TIMER
 
-config QCOM_SCM
-	bool
-
 endif
diff --git a/arch/arm/mach-qcom/Makefile b/arch/arm/mach-qcom/Makefile
index 8f756ae1ae31..e324375fa919 100644
--- a/arch/arm/mach-qcom/Makefile
+++ b/arch/arm/mach-qcom/Makefile
@@ -1,5 +1,2 @@
 obj-y			:= board.o
 obj-$(CONFIG_SMP)	+= platsmp.o
-obj-$(CONFIG_QCOM_SCM)	+= scm.o scm-boot.o
-
-CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
index 09cffed4c0a4..5cde63a64b34 100644
--- a/arch/arm/mach-qcom/platsmp.c
+++ b/arch/arm/mach-qcom/platsmp.c
@@ -17,10 +17,10 @@
 #include <linux/of_address.h>
 #include <linux/smp.h>
 #include <linux/io.h>
+#include <linux/qcom_scm.h>
 
 #include <asm/smp_plat.h>
 
-#include "scm-boot.h"
 
 #define VDD_SC1_ARRAY_CLAMP_GFS_CTL	0x35a0
 #define SCSS_CPU1CORE_RESET		0x2d80
@@ -319,25 +319,10 @@ static int kpssv2_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
 {
-	int cpu, map;
-	unsigned int flags = 0;
-	static const int cold_boot_flags[] = {
-		0,
-		SCM_FLAG_COLDBOOT_CPU1,
-		SCM_FLAG_COLDBOOT_CPU2,
-		SCM_FLAG_COLDBOOT_CPU3,
-	};
-
-	for_each_present_cpu(cpu) {
-		map = cpu_logical_map(cpu);
-		if (WARN_ON(map >= ARRAY_SIZE(cold_boot_flags))) {
-			set_cpu_present(cpu, false);
-			continue;
-		}
-		flags |= cold_boot_flags[map];
-	}
+	int cpu;
 
-	if (scm_set_boot_addr(virt_to_phys(secondary_startup_arm), flags)) {
+	if (qcom_scm_set_cold_boot_addr(secondary_startup_arm,
+					cpu_present_mask)) {
 		for_each_present_cpu(cpu) {
 			if (cpu == smp_processor_id())
 				continue;
diff --git a/arch/arm/mach-qcom/scm-boot.c b/arch/arm/mach-qcom/scm-boot.c
deleted file mode 100644
index e8ff7beb6218..000000000000
--- a/arch/arm/mach-qcom/scm-boot.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-
-#include "scm.h"
-#include "scm-boot.h"
-
-/*
- * Set the cold/warm boot address for one of the CPU cores.
- */
-int scm_set_boot_addr(u32 addr, int flags)
-{
-	struct {
-		__le32 flags;
-		__le32 addr;
-	} cmd;
-
-	cmd.addr = cpu_to_le32(addr);
-	cmd.flags = cpu_to_le32(flags);
-	return scm_call(SCM_SVC_BOOT, SCM_BOOT_ADDR,
-			&cmd, sizeof(cmd), NULL, 0);
-}
-EXPORT_SYMBOL(scm_set_boot_addr);
diff --git a/arch/arm/mach-qcom/scm-boot.h b/arch/arm/mach-qcom/scm-boot.h
deleted file mode 100644
index 3e210fb818bb..000000000000
--- a/arch/arm/mach-qcom/scm-boot.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_SCM_BOOT_H
-#define __MACH_SCM_BOOT_H
-
-#define SCM_BOOT_ADDR			0x1
-#define SCM_FLAG_COLDBOOT_CPU1		0x01
-#define SCM_FLAG_COLDBOOT_CPU2		0x08
-#define SCM_FLAG_COLDBOOT_CPU3		0x20
-#define SCM_FLAG_WARMBOOT_CPU0		0x04
-#define SCM_FLAG_WARMBOOT_CPU1		0x02
-#define SCM_FLAG_WARMBOOT_CPU2		0x10
-#define SCM_FLAG_WARMBOOT_CPU3		0x40
-
-int scm_set_boot_addr(u32 addr, int flags);
-
-#endif
diff --git a/arch/arm/mach-qcom/scm.c b/arch/arm/mach-qcom/scm.c
deleted file mode 100644
index 1d9cf18c7091..000000000000
--- a/arch/arm/mach-qcom/scm.c
+++ /dev/null
@@ -1,326 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-
-#include <asm/outercache.h>
-#include <asm/cacheflush.h>
-
-#include "scm.h"
-
-#define SCM_ENOMEM		-5
-#define SCM_EOPNOTSUPP		-4
-#define SCM_EINVAL_ADDR		-3
-#define SCM_EINVAL_ARG		-2
-#define SCM_ERROR		-1
-#define SCM_INTERRUPTED		1
-
-static DEFINE_MUTEX(scm_lock);
-
-/**
- * struct scm_command - one SCM command buffer
- * @len: total available memory for command and response
- * @buf_offset: start of command buffer
- * @resp_hdr_offset: start of response buffer
- * @id: command to be executed
- * @buf: buffer returned from scm_get_command_buffer()
- *
- * An SCM command is laid out in memory as follows:
- *
- *	------------------- <--- struct scm_command
- *	| command header  |
- *	------------------- <--- scm_get_command_buffer()
- *	| command buffer  |
- *	------------------- <--- struct scm_response and
- *	| response header |      scm_command_to_response()
- *	------------------- <--- scm_get_response_buffer()
- *	| response buffer |
- *	-------------------
- *
- * There can be arbitrary padding between the headers and buffers so
- * you should always use the appropriate scm_get_*_buffer() routines
- * to access the buffers in a safe manner.
- */
-struct scm_command {
-	__le32 len;
-	__le32 buf_offset;
-	__le32 resp_hdr_offset;
-	__le32 id;
-	__le32 buf[0];
-};
-
-/**
- * struct scm_response - one SCM response buffer
- * @len: total available memory for response
- * @buf_offset: start of response data relative to start of scm_response
- * @is_complete: indicates if the command has finished processing
- */
-struct scm_response {
-	__le32 len;
-	__le32 buf_offset;
-	__le32 is_complete;
-};
-
-/**
- * alloc_scm_command() - Allocate an SCM command
- * @cmd_size: size of the command buffer
- * @resp_size: size of the response buffer
- *
- * Allocate an SCM command, including enough room for the command
- * and response headers as well as the command and response buffers.
- *
- * Returns a valid &scm_command on success or %NULL if the allocation fails.
- */
-static struct scm_command *alloc_scm_command(size_t cmd_size, size_t resp_size)
-{
-	struct scm_command *cmd;
-	size_t len = sizeof(*cmd) + sizeof(struct scm_response) + cmd_size +
-		resp_size;
-	u32 offset;
-
-	cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
-	if (cmd) {
-		cmd->len = cpu_to_le32(len);
-		offset = offsetof(struct scm_command, buf);
-		cmd->buf_offset = cpu_to_le32(offset);
-		cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size);
-	}
-	return cmd;
-}
-
-/**
- * free_scm_command() - Free an SCM command
- * @cmd: command to free
- *
- * Free an SCM command.
- */
-static inline void free_scm_command(struct scm_command *cmd)
-{
-	kfree(cmd);
-}
-
-/**
- * scm_command_to_response() - Get a pointer to a scm_response
- * @cmd: command
- *
- * Returns a pointer to a response for a command.
- */
-static inline struct scm_response *scm_command_to_response(
-		const struct scm_command *cmd)
-{
-	return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset);
-}
-
-/**
- * scm_get_command_buffer() - Get a pointer to a command buffer
- * @cmd: command
- *
- * Returns a pointer to the command buffer of a command.
- */
-static inline void *scm_get_command_buffer(const struct scm_command *cmd)
-{
-	return (void *)cmd->buf;
-}
-
-/**
- * scm_get_response_buffer() - Get a pointer to a response buffer
- * @rsp: response
- *
- * Returns a pointer to a response buffer of a response.
- */
-static inline void *scm_get_response_buffer(const struct scm_response *rsp)
-{
-	return (void *)rsp + le32_to_cpu(rsp->buf_offset);
-}
-
-static int scm_remap_error(int err)
-{
-	pr_err("scm_call failed with error code %d\n", err);
-	switch (err) {
-	case SCM_ERROR:
-		return -EIO;
-	case SCM_EINVAL_ADDR:
-	case SCM_EINVAL_ARG:
-		return -EINVAL;
-	case SCM_EOPNOTSUPP:
-		return -EOPNOTSUPP;
-	case SCM_ENOMEM:
-		return -ENOMEM;
-	}
-	return -EINVAL;
-}
-
-static u32 smc(u32 cmd_addr)
-{
-	int context_id;
-	register u32 r0 asm("r0") = 1;
-	register u32 r1 asm("r1") = (u32)&context_id;
-	register u32 r2 asm("r2") = cmd_addr;
-	do {
-		asm volatile(
-			__asmeq("%0", "r0")
-			__asmeq("%1", "r0")
-			__asmeq("%2", "r1")
-			__asmeq("%3", "r2")
-#ifdef REQUIRES_SEC
-			".arch_extension sec\n"
-#endif
-			"smc	#0	@ switch to secure world\n"
-			: "=r" (r0)
-			: "r" (r0), "r" (r1), "r" (r2)
-			: "r3");
-	} while (r0 == SCM_INTERRUPTED);
-
-	return r0;
-}
-
-static int __scm_call(const struct scm_command *cmd)
-{
-	int ret;
-	u32 cmd_addr = virt_to_phys(cmd);
-
-	/*
-	 * Flush the command buffer so that the secure world sees
-	 * the correct data.
-	 */
-	__cpuc_flush_dcache_area((void *)cmd, cmd->len);
-	outer_flush_range(cmd_addr, cmd_addr + cmd->len);
-
-	ret = smc(cmd_addr);
-	if (ret < 0)
-		ret = scm_remap_error(ret);
-
-	return ret;
-}
-
-static void scm_inv_range(unsigned long start, unsigned long end)
-{
-	u32 cacheline_size, ctr;
-
-	asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr));
-	cacheline_size = 4 << ((ctr >> 16) & 0xf);
-
-	start = round_down(start, cacheline_size);
-	end = round_up(end, cacheline_size);
-	outer_inv_range(start, end);
-	while (start < end) {
-		asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
-		     : "memory");
-		start += cacheline_size;
-	}
-	dsb();
-	isb();
-}
-
-/**
- * scm_call() - Send an SCM command
- * @svc_id: service identifier
- * @cmd_id: command identifier
- * @cmd_buf: command buffer
- * @cmd_len: length of the command buffer
- * @resp_buf: response buffer
- * @resp_len: length of the response buffer
- *
- * Sends a command to the SCM and waits for the command to finish processing.
- *
- * A note on cache maintenance:
- * Note that any buffers that are expected to be accessed by the secure world
- * must be flushed before invoking scm_call and invalidated in the cache
- * immediately after scm_call returns. Cache maintenance on the command and
- * response buffers is taken care of by scm_call; however, callers are
- * responsible for any other cached buffers passed over to the secure world.
- */
-int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
-		void *resp_buf, size_t resp_len)
-{
-	int ret;
-	struct scm_command *cmd;
-	struct scm_response *rsp;
-	unsigned long start, end;
-
-	cmd = alloc_scm_command(cmd_len, resp_len);
-	if (!cmd)
-		return -ENOMEM;
-
-	cmd->id = cpu_to_le32((svc_id << 10) | cmd_id);
-	if (cmd_buf)
-		memcpy(scm_get_command_buffer(cmd), cmd_buf, cmd_len);
-
-	mutex_lock(&scm_lock);
-	ret = __scm_call(cmd);
-	mutex_unlock(&scm_lock);
-	if (ret)
-		goto out;
-
-	rsp = scm_command_to_response(cmd);
-	start = (unsigned long)rsp;
-
-	do {
-		scm_inv_range(start, start + sizeof(*rsp));
-	} while (!rsp->is_complete);
-
-	end = (unsigned long)scm_get_response_buffer(rsp) + resp_len;
-	scm_inv_range(start, end);
-
-	if (resp_buf)
-		memcpy(resp_buf, scm_get_response_buffer(rsp), resp_len);
-out:
-	free_scm_command(cmd);
-	return ret;
-}
-EXPORT_SYMBOL(scm_call);
-
-u32 scm_get_version(void)
-{
-	int context_id;
-	static u32 version = -1;
-	register u32 r0 asm("r0");
-	register u32 r1 asm("r1");
-
-	if (version != -1)
-		return version;
-
-	mutex_lock(&scm_lock);
-
-	r0 = 0x1 << 8;
-	r1 = (u32)&context_id;
-	do {
-		asm volatile(
-			__asmeq("%0", "r0")
-			__asmeq("%1", "r1")
-			__asmeq("%2", "r0")
-			__asmeq("%3", "r1")
-#ifdef REQUIRES_SEC
-			".arch_extension sec\n"
-#endif
-			"smc	#0	@ switch to secure world\n"
-			: "=r" (r0), "=r" (r1)
-			: "r" (r0), "r" (r1)
-			: "r2", "r3");
-	} while (r0 == SCM_INTERRUPTED);
-
-	version = r1;
-	mutex_unlock(&scm_lock);
-
-	return version;
-}
-EXPORT_SYMBOL(scm_get_version);
diff --git a/arch/arm/mach-qcom/scm.h b/arch/arm/mach-qcom/scm.h
deleted file mode 100644
index 00b31ea58f29..000000000000
--- a/arch/arm/mach-qcom/scm.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_SCM_H
-#define __MACH_SCM_H
-
-#define SCM_SVC_BOOT			0x1
-#define SCM_SVC_PIL			0x2
-
-extern int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
-		void *resp_buf, size_t resp_len);
-
-#define SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF))
-
-extern u32 scm_get_version(void);
-
-#endif
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 41983883cef4..6517132e5d8b 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -132,6 +132,10 @@ config ISCSI_IBFT
 	  detect iSCSI boot parameters dynamically during system boot, say Y.
 	  Otherwise, say N.
 
+config QCOM_SCM
+	bool
+	depends on ARM || ARM64
+
 source "drivers/firmware/google/Kconfig"
 source "drivers/firmware/efi/Kconfig"
 
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 5373dc5b6011..3fdd3912709a 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -11,6 +11,8 @@ obj-$(CONFIG_DMIID)		+= dmi-id.o
 obj-$(CONFIG_ISCSI_IBFT_FIND)	+= iscsi_ibft_find.o
 obj-$(CONFIG_ISCSI_IBFT)	+= iscsi_ibft.o
 obj-$(CONFIG_FIRMWARE_MEMMAP)	+= memmap.o
+obj-$(CONFIG_QCOM_SCM)		+= qcom_scm.o
+CFLAGS_qcom_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
 
 obj-$(CONFIG_GOOGLE_FIRMWARE)	+= google/
 obj-$(CONFIG_EFI)		+= efi/
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
new file mode 100644
index 000000000000..994b50fd997c
--- /dev/null
+++ b/drivers/firmware/qcom_scm.c
@@ -0,0 +1,494 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ * Copyright (C) 2015 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/qcom_scm.h>
+
+#include <asm/outercache.h>
+#include <asm/cacheflush.h>
+
+
+#define QCOM_SCM_ENOMEM		-5
+#define QCOM_SCM_EOPNOTSUPP	-4
+#define QCOM_SCM_EINVAL_ADDR	-3
+#define QCOM_SCM_EINVAL_ARG	-2
+#define QCOM_SCM_ERROR		-1
+#define QCOM_SCM_INTERRUPTED	1
+
+#define QCOM_SCM_FLAG_COLDBOOT_CPU0	0x00
+#define QCOM_SCM_FLAG_COLDBOOT_CPU1	0x01
+#define QCOM_SCM_FLAG_COLDBOOT_CPU2	0x08
+#define QCOM_SCM_FLAG_COLDBOOT_CPU3	0x20
+
+#define QCOM_SCM_FLAG_WARMBOOT_CPU0	0x04
+#define QCOM_SCM_FLAG_WARMBOOT_CPU1	0x02
+#define QCOM_SCM_FLAG_WARMBOOT_CPU2	0x10
+#define QCOM_SCM_FLAG_WARMBOOT_CPU3	0x40
+
+struct qcom_scm_entry {
+	int flag;
+	void *entry;
+};
+
+static struct qcom_scm_entry qcom_scm_wb[] = {
+	{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU0 },
+	{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU1 },
+	{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU2 },
+	{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 },
+};
+
+static DEFINE_MUTEX(qcom_scm_lock);
+
+/**
+ * struct qcom_scm_command - one SCM command buffer
+ * @len: total available memory for command and response
+ * @buf_offset: start of command buffer
+ * @resp_hdr_offset: start of response buffer
+ * @id: command to be executed
+ * @buf: buffer returned from qcom_scm_get_command_buffer()
+ *
+ * An SCM command is laid out in memory as follows:
+ *
+ *	------------------- <--- struct qcom_scm_command
+ *	| command header  |
+ *	------------------- <--- qcom_scm_get_command_buffer()
+ *	| command buffer  |
+ *	------------------- <--- struct qcom_scm_response and
+ *	| response header |      qcom_scm_command_to_response()
+ *	------------------- <--- qcom_scm_get_response_buffer()
+ *	| response buffer |
+ *	-------------------
+ *
+ * There can be arbitrary padding between the headers and buffers so
+ * you should always use the appropriate qcom_scm_get_*_buffer() routines
+ * to access the buffers in a safe manner.
+ */
+struct qcom_scm_command {
+	__le32 len;
+	__le32 buf_offset;
+	__le32 resp_hdr_offset;
+	__le32 id;
+	__le32 buf[0];
+};
+
+/**
+ * struct qcom_scm_response - one SCM response buffer
+ * @len: total available memory for response
+ * @buf_offset: start of response data relative to start of qcom_scm_response
+ * @is_complete: indicates if the command has finished processing
+ */
+struct qcom_scm_response {
+	__le32 len;
+	__le32 buf_offset;
+	__le32 is_complete;
+};
+
+/**
+ * alloc_qcom_scm_command() - Allocate an SCM command
+ * @cmd_size: size of the command buffer
+ * @resp_size: size of the response buffer
+ *
+ * Allocate an SCM command, including enough room for the command
+ * and response headers as well as the command and response buffers.
+ *
+ * Returns a valid &qcom_scm_command on success or %NULL if the allocation fails.
+ */
+static struct qcom_scm_command *alloc_qcom_scm_command(size_t cmd_size, size_t resp_size)
+{
+	struct qcom_scm_command *cmd;
+	size_t len = sizeof(*cmd) + sizeof(struct qcom_scm_response) + cmd_size +
+		resp_size;
+	u32 offset;
+
+	cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
+	if (cmd) {
+		cmd->len = cpu_to_le32(len);
+		offset = offsetof(struct qcom_scm_command, buf);
+		cmd->buf_offset = cpu_to_le32(offset);
+		cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size);
+	}
+	return cmd;
+}
+
+/**
+ * free_qcom_scm_command() - Free an SCM command
+ * @cmd: command to free
+ *
+ * Free an SCM command.
+ */
+static inline void free_qcom_scm_command(struct qcom_scm_command *cmd)
+{
+	kfree(cmd);
+}
+
+/**
+ * qcom_scm_command_to_response() - Get a pointer to a qcom_scm_response
+ * @cmd: command
+ *
+ * Returns a pointer to a response for a command.
+ */
+static inline struct qcom_scm_response *qcom_scm_command_to_response(
+		const struct qcom_scm_command *cmd)
+{
+	return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset);
+}
+
+/**
+ * qcom_scm_get_command_buffer() - Get a pointer to a command buffer
+ * @cmd: command
+ *
+ * Returns a pointer to the command buffer of a command.
+ */
+static inline void *qcom_scm_get_command_buffer(const struct qcom_scm_command *cmd)
+{
+	return (void *)cmd->buf;
+}
+
+/**
+ * qcom_scm_get_response_buffer() - Get a pointer to a response buffer
+ * @rsp: response
+ *
+ * Returns a pointer to a response buffer of a response.
+ */
+static inline void *qcom_scm_get_response_buffer(const struct qcom_scm_response *rsp)
+{
+	return (void *)rsp + le32_to_cpu(rsp->buf_offset);
+}
+
+static int qcom_scm_remap_error(int err)
+{
+	pr_err("qcom_scm_call failed with error code %d\n", err);
+	switch (err) {
+	case QCOM_SCM_ERROR:
+		return -EIO;
+	case QCOM_SCM_EINVAL_ADDR:
+	case QCOM_SCM_EINVAL_ARG:
+		return -EINVAL;
+	case QCOM_SCM_EOPNOTSUPP:
+		return -EOPNOTSUPP;
+	case QCOM_SCM_ENOMEM:
+		return -ENOMEM;
+	}
+	return -EINVAL;
+}
+
+static u32 smc(u32 cmd_addr)
+{
+	int context_id;
+	register u32 r0 asm("r0") = 1;
+	register u32 r1 asm("r1") = (u32)&context_id;
+	register u32 r2 asm("r2") = cmd_addr;
+	do {
+		asm volatile(
+			__asmeq("%0", "r0")
+			__asmeq("%1", "r0")
+			__asmeq("%2", "r1")
+			__asmeq("%3", "r2")
+#ifdef REQUIRES_SEC
+			".arch_extension sec\n"
+#endif
+			"smc	#0	@ switch to secure world\n"
+			: "=r" (r0)
+			: "r" (r0), "r" (r1), "r" (r2)
+			: "r3");
+	} while (r0 == QCOM_SCM_INTERRUPTED);
+
+	return r0;
+}
+
+static int __qcom_scm_call(const struct qcom_scm_command *cmd)
+{
+	int ret;
+	u32 cmd_addr = virt_to_phys(cmd);
+
+	/*
+	 * Flush the command buffer so that the secure world sees
+	 * the correct data.
+	 */
+	__cpuc_flush_dcache_area((void *)cmd, cmd->len);
+	outer_flush_range(cmd_addr, cmd_addr + cmd->len);
+
+	ret = smc(cmd_addr);
+	if (ret < 0)
+		ret = qcom_scm_remap_error(ret);
+
+	return ret;
+}
+
+static void qcom_scm_inv_range(unsigned long start, unsigned long end)
+{
+	u32 cacheline_size, ctr;
+
+	asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr));
+	cacheline_size = 4 << ((ctr >> 16) & 0xf);
+
+	start = round_down(start, cacheline_size);
+	end = round_up(end, cacheline_size);
+	outer_inv_range(start, end);
+	while (start < end) {
+		asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
+		     : "memory");
+		start += cacheline_size;
+	}
+	dsb();
+	isb();
+}
+
+/**
+ * qcom_scm_call() - Send an SCM command
+ * @svc_id: service identifier
+ * @cmd_id: command identifier
+ * @cmd_buf: command buffer
+ * @cmd_len: length of the command buffer
+ * @resp_buf: response buffer
+ * @resp_len: length of the response buffer
+ *
+ * Sends a command to the SCM and waits for the command to finish processing.
+ *
+ * A note on cache maintenance:
+ * Note that any buffers that are expected to be accessed by the secure world
+ * must be flushed before invoking qcom_scm_call and invalidated in the cache
+ * immediately after qcom_scm_call returns. Cache maintenance on the command
+ * and response buffers is taken care of by qcom_scm_call; however, callers are
+ * responsible for any other cached buffers passed over to the secure world.
+ */
+static int qcom_scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf,
+			size_t cmd_len, void *resp_buf, size_t resp_len)
+{
+	int ret;
+	struct qcom_scm_command *cmd;
+	struct qcom_scm_response *rsp;
+	unsigned long start, end;
+
+	cmd = alloc_qcom_scm_command(cmd_len, resp_len);
+	if (!cmd)
+		return -ENOMEM;
+
+	cmd->id = cpu_to_le32((svc_id << 10) | cmd_id);
+	if (cmd_buf)
+		memcpy(qcom_scm_get_command_buffer(cmd), cmd_buf, cmd_len);
+
+	mutex_lock(&qcom_scm_lock);
+	ret = __qcom_scm_call(cmd);
+	mutex_unlock(&qcom_scm_lock);
+	if (ret)
+		goto out;
+
+	rsp = qcom_scm_command_to_response(cmd);
+	start = (unsigned long)rsp;
+
+	do {
+		qcom_scm_inv_range(start, start + sizeof(*rsp));
+	} while (!rsp->is_complete);
+
+	end = (unsigned long)qcom_scm_get_response_buffer(rsp) + resp_len;
+	qcom_scm_inv_range(start, end);
+
+	if (resp_buf)
+		memcpy(resp_buf, qcom_scm_get_response_buffer(rsp), resp_len);
+out:
+	free_qcom_scm_command(cmd);
+	return ret;
+}
+
+#define SCM_CLASS_REGISTER	(0x2 << 8)
+#define SCM_MASK_IRQS		BIT(5)
+#define SCM_ATOMIC(svc, cmd, n) (((((svc) << 10)|((cmd) & 0x3ff)) << 12) | \
+				SCM_CLASS_REGISTER | \
+				SCM_MASK_IRQS | \
+				(n & 0xf))
+
+/**
+ * qcom_scm_call_atomic1() - Send an atomic SCM command with one argument
+ * @svc_id: service identifier
+ * @cmd_id: command identifier
+ * @arg1: first argument
+ *
+ * This shall only be used with commands that are guaranteed to be
+ * uninterruptable, atomic and SMP safe.
+ */
+static s32 qcom_scm_call_atomic1(u32 svc, u32 cmd, u32 arg1)
+{
+	int context_id;
+
+	register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 1);
+	register u32 r1 asm("r1") = (u32)&context_id;
+	register u32 r2 asm("r2") = arg1;
+
+	asm volatile(
+			__asmeq("%0", "r0")
+			__asmeq("%1", "r0")
+			__asmeq("%2", "r1")
+			__asmeq("%3", "r2")
+#ifdef REQUIRES_SEC
+			".arch_extension sec\n"
+#endif
+			"smc    #0      @ switch to secure world\n"
+			: "=r" (r0)
+			: "r" (r0), "r" (r1), "r" (r2)
+			: "r3");
+	return r0;
+}
+
+u32 qcom_scm_get_version(void)
+{
+	int context_id;
+	static u32 version = -1;
+	register u32 r0 asm("r0");
+	register u32 r1 asm("r1");
+
+	if (version != -1)
+		return version;
+
+	mutex_lock(&qcom_scm_lock);
+
+	r0 = 0x1 << 8;
+	r1 = (u32)&context_id;
+	do {
+		asm volatile(
+			__asmeq("%0", "r0")
+			__asmeq("%1", "r1")
+			__asmeq("%2", "r0")
+			__asmeq("%3", "r1")
+#ifdef REQUIRES_SEC
+			".arch_extension sec\n"
+#endif
+			"smc	#0	@ switch to secure world\n"
+			: "=r" (r0), "=r" (r1)
+			: "r" (r0), "r" (r1)
+			: "r2", "r3");
+	} while (r0 == QCOM_SCM_INTERRUPTED);
+
+	version = r1;
+	mutex_unlock(&qcom_scm_lock);
+
+	return version;
+}
+EXPORT_SYMBOL(qcom_scm_get_version);
+
+#define QCOM_SCM_SVC_BOOT			0x1
+#define QCOM_SCM_BOOT_ADDR			0x1
+/*
+ * Set the cold/warm boot address for one of the CPU cores.
+ */
+static int qcom_scm_set_boot_addr(u32 addr, int flags)
+{
+	struct {
+		__le32 flags;
+		__le32 addr;
+	} cmd;
+
+	cmd.addr = cpu_to_le32(addr);
+	cmd.flags = cpu_to_le32(flags);
+	return qcom_scm_call(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
+			&cmd, sizeof(cmd), NULL, 0);
+}
+
+/**
+ * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
+ * @entry: Entry point function for the cpus
+ * @cpus: The cpumask of cpus that will use the entry point
+ *
+ * Set the cold boot address of the cpus. Any cpu outside the supported
+ * range would be removed from the cpu present mask.
+ */
+int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
+{
+	int flags = 0;
+	int cpu;
+	int scm_cb_flags[] = {
+		QCOM_SCM_FLAG_COLDBOOT_CPU0,
+		QCOM_SCM_FLAG_COLDBOOT_CPU1,
+		QCOM_SCM_FLAG_COLDBOOT_CPU2,
+		QCOM_SCM_FLAG_COLDBOOT_CPU3,
+	};
+
+	if (!cpus || (cpus && cpumask_empty(cpus)))
+		return -EINVAL;
+
+	for_each_cpu(cpu, cpus) {
+		if (cpu < ARRAY_SIZE(scm_cb_flags))
+			flags |= scm_cb_flags[cpu];
+		else
+			set_cpu_present(cpu, false);
+	}
+
+	return qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
+}
+EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
+
+/**
+ * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
+ * @entry: Entry point function for the cpus
+ * @cpus: The cpumask of cpus that will use the entry point
+ *
+ * Set the Linux entry point for the SCM to transfer control to when coming
+ * out of a power down. CPU power down may be executed on cpuidle or hotplug.
+ */
+int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
+{
+	int ret;
+	int flags = 0;
+	int cpu;
+
+	/*
+	 * Reassign only if we are switching from hotplug entry point
+	 * to cpuidle entry point or vice versa.
+	 */
+	for_each_cpu(cpu, cpus) {
+		if (entry == qcom_scm_wb[cpu].entry)
+			continue;
+		flags |= qcom_scm_wb[cpu].flag;
+	}
+
+	/* No change in entry function */
+	if (!flags)
+		return 0;
+
+	ret = qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
+	if (!ret) {
+		for_each_cpu(cpu, cpus)
+			qcom_scm_wb[cpu].entry = entry;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
+
+#define QCOM_SCM_CMD_TERMINATE_PC	0x2
+#define QCOM_SCM_FLUSH_FLAG_MASK	0x3
+
+/**
+ * qcom_scm_cpu_power_down() - Power down the cpu
+ * @flags - Flags to flush cache
+ *
+ * This is an end point to power down cpu. If there was a pending interrupt,
+ * the control would return from this function, otherwise, the cpu jumps to the
+ * warm boot entry point set for this cpu upon reset.
+ */
+void qcom_scm_cpu_power_down(u32 flags)
+{
+	qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC,
+			flags & QCOM_SCM_FLUSH_FLAG_MASK);
+}
+EXPORT_SYMBOL(qcom_scm_cpu_power_down);
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 7bd2c94f54a4..460b2dba109c 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -4,6 +4,7 @@
 config QCOM_GSBI
         tristate "QCOM General Serial Bus Interface"
         depends on ARCH_QCOM
+        select MFD_SYSCON
         help
           Say y here to enable GSBI support.  The GSBI provides control
           functions for connecting the underlying serial UART, SPI, and I2C
diff --git a/drivers/soc/qcom/qcom_gsbi.c b/drivers/soc/qcom/qcom_gsbi.c
index 729425ddfd3e..09c669e70d63 100644
--- a/drivers/soc/qcom/qcom_gsbi.c
+++ b/drivers/soc/qcom/qcom_gsbi.c
@@ -18,22 +18,129 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
 
 #define GSBI_CTRL_REG		0x0000
 #define GSBI_PROTOCOL_SHIFT	4
+#define MAX_GSBI		12
+
+#define TCSR_ADM_CRCI_BASE	0x70
+
+struct crci_config {
+	u32 num_rows;
+	const u32 (*array)[MAX_GSBI];
+};
+
+static const u32 crci_ipq8064[][MAX_GSBI] = {
+	{
+		0x000003, 0x00000c, 0x000030, 0x0000c0,
+		0x000300, 0x000c00, 0x003000, 0x00c000,
+		0x030000, 0x0c0000, 0x300000, 0xc00000
+	},
+	{
+		0x000003, 0x00000c, 0x000030, 0x0000c0,
+		0x000300, 0x000c00, 0x003000, 0x00c000,
+		0x030000, 0x0c0000, 0x300000, 0xc00000
+	},
+};
+
+static const struct crci_config config_ipq8064 = {
+	.num_rows = ARRAY_SIZE(crci_ipq8064),
+	.array = crci_ipq8064,
+};
+
+static const unsigned int crci_apq8064[][MAX_GSBI] = {
+	{
+		0x001800, 0x006000, 0x000030, 0x0000c0,
+		0x000300, 0x000400, 0x000000, 0x000000,
+		0x000000, 0x000000, 0x000000, 0x000000
+	},
+	{
+		0x000000, 0x000000, 0x000000, 0x000000,
+		0x000000, 0x000020, 0x0000c0, 0x000000,
+		0x000000, 0x000000, 0x000000, 0x000000
+	},
+};
+
+static const struct crci_config config_apq8064 = {
+	.num_rows = ARRAY_SIZE(crci_apq8064),
+	.array = crci_apq8064,
+};
+
+static const unsigned int crci_msm8960[][MAX_GSBI] = {
+	{
+		0x000003, 0x00000c, 0x000030, 0x0000c0,
+		0x000300, 0x000400, 0x000000, 0x000000,
+		0x000000, 0x000000, 0x000000, 0x000000
+	},
+	{
+		0x000000, 0x000000, 0x000000, 0x000000,
+		0x000000, 0x000020, 0x0000c0, 0x000300,
+		0x001800, 0x006000, 0x000000, 0x000000
+	},
+};
+
+static const struct crci_config config_msm8960 = {
+	.num_rows = ARRAY_SIZE(crci_msm8960),
+	.array = crci_msm8960,
+};
+
+static const unsigned int crci_msm8660[][MAX_GSBI] = {
+	{	/* ADM 0 - B */
+		0x000003, 0x00000c, 0x000030, 0x0000c0,
+		0x000300, 0x000c00, 0x003000, 0x00c000,
+		0x030000, 0x0c0000, 0x300000, 0xc00000
+	},
+	{	/* ADM 0 - B */
+		0x000003, 0x00000c, 0x000030, 0x0000c0,
+		0x000300, 0x000c00, 0x003000, 0x00c000,
+		0x030000, 0x0c0000, 0x300000, 0xc00000
+	},
+	{	/* ADM 1 - A */
+		0x000003, 0x00000c, 0x000030, 0x0000c0,
+		0x000300, 0x000c00, 0x003000, 0x00c000,
+		0x030000, 0x0c0000, 0x300000, 0xc00000
+	},
+	{	/* ADM 1 - B */
+		0x000003, 0x00000c, 0x000030, 0x0000c0,
+		0x000300, 0x000c00, 0x003000, 0x00c000,
+		0x030000, 0x0c0000, 0x300000, 0xc00000
+	},
+};
+
+static const struct crci_config config_msm8660 = {
+	.num_rows = ARRAY_SIZE(crci_msm8660),
+	.array = crci_msm8660,
+};
 
 struct gsbi_info {
 	struct clk *hclk;
 	u32 mode;
 	u32 crci;
+	struct regmap *tcsr;
+};
+
+static const struct of_device_id tcsr_dt_match[] = {
+	{ .compatible = "qcom,tcsr-ipq8064", .data = &config_ipq8064},
+	{ .compatible = "qcom,tcsr-apq8064", .data = &config_apq8064},
+	{ .compatible = "qcom,tcsr-msm8960", .data = &config_msm8960},
+	{ .compatible = "qcom,tcsr-msm8660", .data = &config_msm8660},
+	{ },
 };
 
 static int gsbi_probe(struct platform_device *pdev)
 {
 	struct device_node *node = pdev->dev.of_node;
+	struct device_node *tcsr_node;
+	const struct of_device_id *match;
 	struct resource *res;
 	void __iomem *base;
 	struct gsbi_info *gsbi;
+	int i;
+	u32 mask, gsbi_num;
+	const struct crci_config *config = NULL;
 
 	gsbi = devm_kzalloc(&pdev->dev, sizeof(*gsbi), GFP_KERNEL);
 
@@ -45,6 +152,32 @@ static int gsbi_probe(struct platform_device *pdev)
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
+	/* get the tcsr node and setup the config and regmap */
+	gsbi->tcsr = syscon_regmap_lookup_by_phandle(node, "syscon-tcsr");
+
+	if (!IS_ERR(gsbi->tcsr)) {
+		tcsr_node = of_parse_phandle(node, "syscon-tcsr", 0);
+		if (tcsr_node) {
+			match = of_match_node(tcsr_dt_match, tcsr_node);
+			if (match)
+				config = match->data;
+			else
+				dev_warn(&pdev->dev, "no matching TCSR\n");
+
+			of_node_put(tcsr_node);
+		}
+	}
+
+	if (of_property_read_u32(node, "cell-index", &gsbi_num)) {
+		dev_err(&pdev->dev, "missing cell-index\n");
+		return -EINVAL;
+	}
+
+	if (gsbi_num < 1 || gsbi_num > MAX_GSBI) {
+		dev_err(&pdev->dev, "invalid cell-index\n");
+		return -EINVAL;
+	}
+
 	if (of_property_read_u32(node, "qcom,mode", &gsbi->mode)) {
 		dev_err(&pdev->dev, "missing mode configuration\n");
 		return -EINVAL;
@@ -64,6 +197,25 @@ static int gsbi_probe(struct platform_device *pdev)
 	writel_relaxed((gsbi->mode << GSBI_PROTOCOL_SHIFT) | gsbi->crci,
 				base + GSBI_CTRL_REG);
 
+	/*
+	 * modify tcsr to reflect mode and ADM CRCI mux
+	 * Each gsbi contains a pair of bits, one for RX and one for TX
+	 * SPI mode requires both bits cleared, otherwise they are set
+	 */
+	if (config) {
+		for (i = 0; i < config->num_rows; i++) {
+			mask = config->array[i][gsbi_num - 1];
+
+			if (gsbi->mode == GSBI_PROT_SPI)
+				regmap_update_bits(gsbi->tcsr,
+					TCSR_ADM_CRCI_BASE + 4 * i, mask, 0);
+			else
+				regmap_update_bits(gsbi->tcsr,
+					TCSR_ADM_CRCI_BASE + 4 * i, mask, mask);
+
+		}
+	}
+
 	/* make sure the gsbi control write is not reordered */
 	wmb();
 
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
new file mode 100644
index 000000000000..d7a974d5f57c
--- /dev/null
+++ b/include/linux/qcom_scm.h
@@ -0,0 +1,28 @@
+/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2015 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __QCOM_SCM_H
+#define __QCOM_SCM_H
+
+extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
+extern int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
+
+#define QCOM_SCM_CPU_PWR_DOWN_L2_ON	0x0
+#define QCOM_SCM_CPU_PWR_DOWN_L2_OFF	0x1
+
+extern void qcom_scm_cpu_power_down(u32 flags);
+
+#define QCOM_SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF))
+
+extern u32 qcom_scm_get_version(void);
+
+#endif