Merge tag 'nfc-next-3.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next

Samuel Ortiz <sameo@linux.intel.com> says:

"NFC: 3.15: First pull request

This is the NFC pull request for 3.15. With this one we have:

- Support for ISO 15693 a.k.a. NFC vicinity a.k.a. Type 5 tags. ISO
  15693 are long range (1 - 2 meters) vicinity tags/cards. The kernel
  now supports those through the NFC netlink and digital APIs.

- Support for TI's trf7970a chipset. This chipset relies on the NFC
  digital layer and the driver currently supports type 2, 4A and 5 tags.

- Support for NXP's pn544 secure firmare download. The pn544 C3 chipsets
  relies on a different firmware download protocal than the C2 one. We
  now support both and use the right one depending on the version we
  detect at runtime.

- Support for 4A tags from the NFC digital layer.

- A bunch of cleanups and minor fixes from Axel Lin and Thierry Escande."

Signed-off-by: John W. Linville <linville@tuxdriver.com>

22 files changed, 1985 insertions, 68 deletions

diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
new file mode 100644
index 000000000000..8dd3ef7bc56b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
@@ -0,0 +1,34 @@
+* Texas Instruments TRF7970A RFID/NFC/15693 Transceiver
+
+Required properties:
+- compatible: Should be "ti,trf7970a".
+- spi-max-frequency: Maximum SPI frequency (<= 2000000).
+- interrupt-parent: phandle of parent interrupt handler.
+- interrupts: A single interrupt specifier.
+- ti,enable-gpios: Two GPIO entries used for 'EN' and 'EN2' pins on the
+  TRF7970A.
+- vin-supply: Regulator for supply voltage to VIN pin
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBone with TRF7970A on SPI1):
+
+&spi1 {
+	status = "okay";
+
+	nfc@0 {
+		compatible = "ti,trf7970a";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trf7970a_default>;
+		spi-max-frequency = <2000000>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <14 0>;
+		ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>,
+				  <&gpio2 5 GPIO_ACTIVE_LOW>;
+		vin-supply = <&ldo3_reg>;
+		status = "okay";
+	};
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index b2cf5cfb4d29..ec12265ac67b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6067,6 +6067,7 @@ F:	include/net/nfc/
 F:	include/uapi/linux/nfc.h
 F:	drivers/nfc/
 F:	include/linux/platform_data/pn544.h
+F:	Documentation/devicetree/bindings/net/nfc/
 
 NFS, SUNRPC, AND LOCKD CLIENTS
 M:	Trond Myklebust <trond.myklebust@primarydata.com>
diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig
index fe20e1cc0545..65d4ca19d132 100644
--- a/drivers/nfc/Kconfig
+++ b/drivers/nfc/Kconfig
@@ -26,6 +26,18 @@ config NFC_WILINK
 	  Say Y here to compile support for Texas Instrument's NFC WiLink driver
 	  into the kernel or say M to compile it as module.
 
+config NFC_TRF7970A
+	tristate "Texas Instruments TRF7970a NFC driver"
+	depends on SPI && NFC_DIGITAL
+	help
+	  This option enables the NFC driver for Texas Instruments' TRF7970a
+	  device. Such device supports 5 different protocols: ISO14443A,
+	  ISO14443B, FeLiCa, ISO15693 and ISO18000-3.
+
+	  Say Y here to compile support for TRF7970a into the kernel or
+	  say M  to compile it as a module. The module will be called
+	  trf7970a.ko.
+
 config NFC_MEI_PHY
 	tristate "MEI bus NFC device support"
 	depends on INTEL_MEI && NFC_HCI
diff --git a/drivers/nfc/Makefile b/drivers/nfc/Makefile
index 56ab822ba03d..ae42a3fa60c9 100644
--- a/drivers/nfc/Makefile
+++ b/drivers/nfc/Makefile
@@ -10,5 +10,6 @@ obj-$(CONFIG_NFC_MEI_PHY)	+= mei_phy.o
 obj-$(CONFIG_NFC_SIM)		+= nfcsim.o
 obj-$(CONFIG_NFC_PORT100)	+= port100.o
 obj-$(CONFIG_NFC_MRVL)		+= nfcmrvl/
+obj-$(CONFIG_NFC_TRF7970A)	+= trf7970a.o
 
 ccflags-$(CONFIG_NFC_DEBUG) := -DDEBUG
diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c
index cf1a87bb74f8..d46a700a9637 100644
--- a/drivers/nfc/pn533.c
+++ b/drivers/nfc/pn533.c
@@ -55,26 +55,14 @@
 				   NFC_PROTO_NFC_DEP_MASK)
 
 static const struct usb_device_id pn533_table[] = {
-	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE,
-	  .idVendor		= PN533_VENDOR_ID,
-	  .idProduct		= PN533_PRODUCT_ID,
-	  .driver_info		= PN533_DEVICE_STD,
-	},
-	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE,
-	  .idVendor		= SCM_VENDOR_ID,
-	  .idProduct		= SCL3711_PRODUCT_ID,
-	  .driver_info		= PN533_DEVICE_STD,
-	},
-	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE,
-	  .idVendor		= SONY_VENDOR_ID,
-	  .idProduct		= PASORI_PRODUCT_ID,
-	  .driver_info		= PN533_DEVICE_PASORI,
-	},
-	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE,
-	  .idVendor		= ACS_VENDOR_ID,
-	  .idProduct		= ACR122U_PRODUCT_ID,
-	  .driver_info		= PN533_DEVICE_ACR122U,
-	},
+	{ USB_DEVICE(PN533_VENDOR_ID, PN533_PRODUCT_ID),
+	  .driver_info = PN533_DEVICE_STD },
+	{ USB_DEVICE(SCM_VENDOR_ID, SCL3711_PRODUCT_ID),
+	  .driver_info = PN533_DEVICE_STD },
+	{ USB_DEVICE(SONY_VENDOR_ID, PASORI_PRODUCT_ID),
+	  .driver_info = PN533_DEVICE_PASORI },
+	{ USB_DEVICE(ACS_VENDOR_ID, ACR122U_PRODUCT_ID),
+	  .driver_info = PN533_DEVICE_ACR122U },
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, pn533_table);
diff --git a/drivers/nfc/pn544/i2c.c b/drivers/nfc/pn544/i2c.c
index d6185ff2f87b..f2acd85be86e 100644
--- a/drivers/nfc/pn544/i2c.c
+++ b/drivers/nfc/pn544/i2c.c
@@ -58,8 +58,19 @@ MODULE_DEVICE_TABLE(i2c, pn544_hci_i2c_id_table);
 
 #define PN544_HCI_I2C_DRIVER_NAME "pn544_hci_i2c"
 
+/*
+ * Exposed through the 4 most significant bytes
+ * from the HCI SW_VERSION first byte, a.k.a.
+ * SW RomLib.
+ */
+#define PN544_HW_VARIANT_C2 0xa
+#define PN544_HW_VARIANT_C3 0xb
+
+#define PN544_FW_CMD_RESET 0x01
 #define PN544_FW_CMD_WRITE 0x08
 #define PN544_FW_CMD_CHECK 0x06
+#define PN544_FW_CMD_SECURE_WRITE 0x0C
+#define PN544_FW_CMD_SECURE_CHUNK_WRITE 0x0D
 
 struct pn544_i2c_fw_frame_write {
 	u8 cmd;
@@ -88,13 +99,31 @@ struct pn544_i2c_fw_blob {
 	u8 data[];
 };
 
+struct pn544_i2c_fw_secure_frame {
+	u8 cmd;
+	u16 be_datalen;
+	u8 data[];
+} __packed;
+
+struct pn544_i2c_fw_secure_blob {
+	u64 header;
+	u8 data[];
+};
+
 #define PN544_FW_CMD_RESULT_TIMEOUT 0x01
 #define PN544_FW_CMD_RESULT_BAD_CRC 0x02
 #define PN544_FW_CMD_RESULT_ACCESS_DENIED 0x08
 #define PN544_FW_CMD_RESULT_PROTOCOL_ERROR 0x0B
 #define PN544_FW_CMD_RESULT_INVALID_PARAMETER 0x11
+#define PN544_FW_CMD_RESULT_UNSUPPORTED_COMMAND 0x13
 #define PN544_FW_CMD_RESULT_INVALID_LENGTH 0x18
+#define PN544_FW_CMD_RESULT_CRYPTOGRAPHIC_ERROR 0x19
+#define PN544_FW_CMD_RESULT_VERSION_CONDITIONS_ERROR 0x1D
+#define PN544_FW_CMD_RESULT_MEMORY_ERROR 0x20
+#define PN544_FW_CMD_RESULT_CHUNK_OK 0x21
 #define PN544_FW_CMD_RESULT_WRITE_FAILED 0x74
+#define PN544_FW_CMD_RESULT_COMMAND_REJECTED 0xE0
+#define PN544_FW_CMD_RESULT_CHUNK_ERROR 0xE6
 
 #define MIN(X, Y) ((X) < (Y) ? (X) : (Y))
 
@@ -104,11 +133,17 @@ struct pn544_i2c_fw_blob {
 #define PN544_FW_I2C_WRITE_DATA_MAX_LEN MIN((PN544_FW_I2C_MAX_PAYLOAD -\
 					 PN544_FW_I2C_WRITE_FRAME_HEADER_LEN),\
 					 PN544_FW_WRITE_BUFFER_MAX_LEN)
+#define PN544_FW_SECURE_CHUNK_WRITE_HEADER_LEN 3
+#define PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN (PN544_FW_I2C_MAX_PAYLOAD -\
+			PN544_FW_SECURE_CHUNK_WRITE_HEADER_LEN)
+#define PN544_FW_SECURE_FRAME_HEADER_LEN 3
+#define PN544_FW_SECURE_BLOB_HEADER_LEN 8
 
 #define FW_WORK_STATE_IDLE 1
 #define FW_WORK_STATE_START 2
 #define FW_WORK_STATE_WAIT_WRITE_ANSWER 3
 #define FW_WORK_STATE_WAIT_CHECK_ANSWER 4
+#define FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER 5
 
 struct pn544_i2c_phy {
 	struct i2c_client *i2c_dev;
@@ -119,6 +154,8 @@ struct pn544_i2c_phy {
 	unsigned int gpio_fw;
 	unsigned int en_polarity;
 
+	u8 hw_variant;
+
 	struct work_struct fw_work;
 	int fw_work_state;
 	char firmware_name[NFC_FIRMWARE_NAME_MAXSIZE + 1];
@@ -127,6 +164,8 @@ struct pn544_i2c_phy {
 	size_t fw_blob_size;
 	const u8 *fw_blob_data;
 	size_t fw_written;
+	size_t fw_size;
+
 	int fw_cmd_result;
 
 	int powered;
@@ -390,6 +429,8 @@ static int pn544_hci_i2c_fw_read_status(struct pn544_i2c_phy *phy)
 	switch (response.status) {
 	case 0:
 		return 0;
+	case PN544_FW_CMD_RESULT_CHUNK_OK:
+		return response.status;
 	case PN544_FW_CMD_RESULT_TIMEOUT:
 		return -ETIMEDOUT;
 	case PN544_FW_CMD_RESULT_BAD_CRC:
@@ -400,9 +441,20 @@ static int pn544_hci_i2c_fw_read_status(struct pn544_i2c_phy *phy)
 		return -EPROTO;
 	case PN544_FW_CMD_RESULT_INVALID_PARAMETER:
 		return -EINVAL;
+	case PN544_FW_CMD_RESULT_UNSUPPORTED_COMMAND:
+		return -ENOTSUPP;
 	case PN544_FW_CMD_RESULT_INVALID_LENGTH:
 		return -EBADMSG;
+	case PN544_FW_CMD_RESULT_CRYPTOGRAPHIC_ERROR:
+		return -ENOKEY;
+	case PN544_FW_CMD_RESULT_VERSION_CONDITIONS_ERROR:
+		return -EINVAL;
+	case PN544_FW_CMD_RESULT_MEMORY_ERROR:
+		return -ENOMEM;
+	case PN544_FW_CMD_RESULT_COMMAND_REJECTED:
+		return -EACCES;
 	case PN544_FW_CMD_RESULT_WRITE_FAILED:
+	case PN544_FW_CMD_RESULT_CHUNK_ERROR:
 		return -EIO;
 	default:
 		return -EIO;
@@ -469,7 +521,8 @@ static struct nfc_phy_ops i2c_phy_ops = {
 	.disable = pn544_hci_i2c_disable,
 };
 
-static int pn544_hci_i2c_fw_download(void *phy_id, const char *firmware_name)
+static int pn544_hci_i2c_fw_download(void *phy_id, const char *firmware_name,
+					u8 hw_variant)
 {
 	struct pn544_i2c_phy *phy = phy_id;
 
@@ -477,6 +530,7 @@ static int pn544_hci_i2c_fw_download(void *phy_id, const char *firmware_name)
 
 	strcpy(phy->firmware_name, firmware_name);
 
+	phy->hw_variant = hw_variant;
 	phy->fw_work_state = FW_WORK_STATE_START;
 
 	schedule_work(&phy->fw_work);
@@ -598,12 +652,93 @@ static int pn544_hci_i2c_fw_write_chunk(struct pn544_i2c_phy *phy)
 	return 0;
 }
 
+static int pn544_hci_i2c_fw_secure_write_frame_cmd(struct pn544_i2c_phy *phy,
+					const u8 *data, u16 datalen)
+{
+	u8 buf[PN544_FW_I2C_MAX_PAYLOAD];
+	struct pn544_i2c_fw_secure_frame *chunk;
+	int chunklen;
+	int r;
+
+	if (datalen > PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN)
+		datalen = PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN;
+
+	chunk = (struct pn544_i2c_fw_secure_frame *) buf;
+
+	chunk->cmd = PN544_FW_CMD_SECURE_CHUNK_WRITE;
+
+	put_unaligned_be16(datalen, &chunk->be_datalen);
+
+	memcpy(chunk->data, data, datalen);
+
+	chunklen = sizeof(chunk->cmd) + sizeof(chunk->be_datalen) + datalen;
+
+	r = i2c_master_send(phy->i2c_dev, buf, chunklen);
+
+	if (r == chunklen)
+		return datalen;
+	else if (r < 0)
+		return r;
+	else
+		return -EIO;
+
+}
+
+static int pn544_hci_i2c_fw_secure_write_frame(struct pn544_i2c_phy *phy)
+{
+	struct pn544_i2c_fw_secure_frame *framep;
+	int r;
+
+	framep = (struct pn544_i2c_fw_secure_frame *) phy->fw_blob_data;
+	if (phy->fw_written == 0)
+		phy->fw_blob_size = get_unaligned_be16(&framep->be_datalen)
+				+ PN544_FW_SECURE_FRAME_HEADER_LEN;
+
+	/* Only secure write command can be chunked*/
+	if (phy->fw_blob_size > PN544_FW_I2C_MAX_PAYLOAD &&
+			framep->cmd != PN544_FW_CMD_SECURE_WRITE)
+		return -EINVAL;
+
+	/* The firmware also have other commands, we just send them directly */
+	if (phy->fw_blob_size < PN544_FW_I2C_MAX_PAYLOAD) {
+		r = i2c_master_send(phy->i2c_dev,
+			(const char *) phy->fw_blob_data, phy->fw_blob_size);
+
+		if (r == phy->fw_blob_size)
+			goto exit;
+		else if (r < 0)
+			return r;
+		else
+			return -EIO;
+	}
+
+	r = pn544_hci_i2c_fw_secure_write_frame_cmd(phy,
+				       phy->fw_blob_data + phy->fw_written,
+				       phy->fw_blob_size - phy->fw_written);
+	if (r < 0)
+		return r;
+
+exit:
+	phy->fw_written += r;
+	phy->fw_work_state = FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER;
+
+	/* SW reset command will not trig any response from PN544 */
+	if (framep->cmd == PN544_FW_CMD_RESET) {
+		pn544_hci_i2c_enable_mode(phy, PN544_FW_MODE);
+		phy->fw_cmd_result = 0;
+		schedule_work(&phy->fw_work);
+	}
+
+	return 0;
+}
+
 static void pn544_hci_i2c_fw_work(struct work_struct *work)
 {
 	struct pn544_i2c_phy *phy = container_of(work, struct pn544_i2c_phy,
 						fw_work);
 	int r;
 	struct pn544_i2c_fw_blob *blob;
+	struct pn544_i2c_fw_secure_blob *secure_blob;
 
 	switch (phy->fw_work_state) {
 	case FW_WORK_STATE_START:
@@ -614,13 +749,29 @@ static void pn544_hci_i2c_fw_work(struct work_struct *work)
 		if (r < 0)
 			goto exit_state_start;
 
-		blob = (struct pn544_i2c_fw_blob *) phy->fw->data;
-		phy->fw_blob_size = get_unaligned_be32(&blob->be_size);
-		phy->fw_blob_dest_addr = get_unaligned_be32(&blob->be_destaddr);
-		phy->fw_blob_data = blob->data;
-
 		phy->fw_written = 0;
-		r = pn544_hci_i2c_fw_write_chunk(phy);
+
+		switch (phy->hw_variant) {
+		case PN544_HW_VARIANT_C2:
+			blob = (struct pn544_i2c_fw_blob *) phy->fw->data;
+			phy->fw_blob_size = get_unaligned_be32(&blob->be_size);
+			phy->fw_blob_dest_addr = get_unaligned_be32(
+							&blob->be_destaddr);
+			phy->fw_blob_data = blob->data;
+
+			r = pn544_hci_i2c_fw_write_chunk(phy);
+			break;
+		case PN544_HW_VARIANT_C3:
+			secure_blob = (struct pn544_i2c_fw_secure_blob *)
+								phy->fw->data;
+			phy->fw_blob_data = secure_blob->data;
+			phy->fw_size = phy->fw->size;
+			r = pn544_hci_i2c_fw_secure_write_frame(phy);
+			break;
+		default:
+			r = -ENOTSUPP;
+			break;
+		}
 
 exit_state_start:
 		if (r < 0)
@@ -672,6 +823,35 @@ exit_state_wait_check_answer:
 			pn544_hci_i2c_fw_work_complete(phy, r);
 		break;
 
+	case FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER:
+		r = phy->fw_cmd_result;
+		if (r < 0)
+			goto exit_state_wait_secure_write_answer;
+
+		if (r == PN544_FW_CMD_RESULT_CHUNK_OK) {
+			r = pn544_hci_i2c_fw_secure_write_frame(phy);
+			goto exit_state_wait_secure_write_answer;
+		}
+
+		if (phy->fw_written == phy->fw_blob_size) {
+			secure_blob = (struct pn544_i2c_fw_secure_blob *)
+				(phy->fw_blob_data + phy->fw_blob_size);
+			phy->fw_size -= phy->fw_blob_size +
+				PN544_FW_SECURE_BLOB_HEADER_LEN;
+			if (phy->fw_size >= PN544_FW_SECURE_BLOB_HEADER_LEN
+					+ PN544_FW_SECURE_FRAME_HEADER_LEN) {
+				phy->fw_blob_data = secure_blob->data;
+
+				phy->fw_written = 0;
+				r = pn544_hci_i2c_fw_secure_write_frame(phy);
+			}
+		}
+
+exit_state_wait_secure_write_answer:
+		if (r < 0 || phy->fw_size == 0)
+			pn544_hci_i2c_fw_work_complete(phy, r);
+		break;
+
 	default:
 		break;
 	}
diff --git a/drivers/nfc/pn544/pn544.c b/drivers/nfc/pn544/pn544.c
index 3df4a109cfad..9c8051d20cea 100644
--- a/drivers/nfc/pn544/pn544.c
+++ b/drivers/nfc/pn544/pn544.c
@@ -786,7 +786,7 @@ static int pn544_hci_fw_download(struct nfc_hci_dev *hdev,
 	if (info->fw_download == NULL)
 		return -ENOTSUPP;
 
-	return info->fw_download(info->phy_id, firmware_name);
+	return info->fw_download(info->phy_id, firmware_name, hdev->sw_romlib);
 }
 
 static int pn544_hci_discover_se(struct nfc_hci_dev *hdev)
diff --git a/drivers/nfc/pn544/pn544.h b/drivers/nfc/pn544/pn544.h
index 491bf45da358..2aa9233e8086 100644
--- a/drivers/nfc/pn544/pn544.h
+++ b/drivers/nfc/pn544/pn544.h
@@ -25,7 +25,8 @@
 #define PN544_HCI_MODE 0
 #define PN544_FW_MODE 1
 
-typedef int (*fw_download_t)(void *context, const char *firmware_name);
+typedef int (*fw_download_t)(void *context, const char *firmware_name,
+				u8 hw_variant);
 
 int pn544_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name,
 		    int phy_headroom, int phy_tailroom, int phy_payload,
diff --git a/drivers/nfc/port100.c b/drivers/nfc/port100.c
index a8555f81cbba..b7a372af5eb7 100644
--- a/drivers/nfc/port100.c
+++ b/drivers/nfc/port100.c
@@ -27,7 +27,8 @@
 #define PORT100_PROTOCOLS (NFC_PROTO_JEWEL_MASK    | \
 			   NFC_PROTO_MIFARE_MASK   | \
 			   NFC_PROTO_FELICA_MASK   | \
-			   NFC_PROTO_NFC_DEP_MASK)
+			   NFC_PROTO_NFC_DEP_MASK  | \
+			   NFC_PROTO_ISO14443_MASK)
 
 #define PORT100_CAPABILITIES (NFC_DIGITAL_DRV_CAPS_IN_CRC | \
 			      NFC_DIGITAL_DRV_CAPS_TG_CRC)
@@ -139,6 +140,8 @@ static const struct port100_in_rf_setting in_rf_settings[] = {
 		.in_recv_set_number = 15,
 		.in_recv_comm_type  = PORT100_COMM_TYPE_IN_106A,
 	},
+	/* Ensures the array has NFC_DIGITAL_RF_TECH_LAST elements */
+	[NFC_DIGITAL_RF_TECH_LAST] = { 0 },
 };
 
 /**
@@ -174,6 +177,9 @@ static const struct port100_tg_rf_setting tg_rf_settings[] = {
 		.tg_set_number = 8,
 		.tg_comm_type = PORT100_COMM_TYPE_TG_424F,
 	},
+	/* Ensures the array has NFC_DIGITAL_RF_TECH_LAST elements */
+	[NFC_DIGITAL_RF_TECH_LAST] = { 0 },
+
 };
 
 #define PORT100_IN_PROT_INITIAL_GUARD_TIME      0x00
@@ -293,6 +299,10 @@ in_protocols[][PORT100_IN_MAX_NUM_PROTOCOLS + 1] = {
 		{ PORT100_IN_PROT_CHECK_CRC, 0 },
 		{ PORT100_IN_PROT_END,       0 },
 	},
+	[NFC_DIGITAL_FRAMING_NFCA_T4T] = {
+		/* nfc_digital_framing_nfca_standard_with_crc_a */
+		{ PORT100_IN_PROT_END,       0 },
+	},
 	[NFC_DIGITAL_FRAMING_NFCA_NFC_DEP] = {
 		/* nfc_digital_framing_nfca_standard */
 		{ PORT100_IN_PROT_END, 0 },
@@ -330,6 +340,10 @@ in_protocols[][PORT100_IN_MAX_NUM_PROTOCOLS + 1] = {
 	[NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED] = {
 		{ PORT100_IN_PROT_END, 0 },
 	},
+	/* Ensures the array has NFC_DIGITAL_FRAMING_LAST elements */
+	[NFC_DIGITAL_FRAMING_LAST] = {
+		{ PORT100_IN_PROT_END, 0 },
+	},
 };
 
 static struct port100_protocol
@@ -371,6 +385,10 @@ tg_protocols[][PORT100_TG_MAX_NUM_PROTOCOLS + 1] = {
 		{ PORT100_TG_PROT_RF_OFF, 1 },
 		{ PORT100_TG_PROT_END,    0 },
 	},
+	/* Ensures the array has NFC_DIGITAL_FRAMING_LAST elements */
+	[NFC_DIGITAL_FRAMING_LAST] = {
+		{ PORT100_TG_PROT_END,    0 },
+	},
 };
 
 struct port100 {
@@ -1356,10 +1374,7 @@ static struct nfc_digital_ops port100_digital_ops = {
 };
 
 static const struct usb_device_id port100_table[] = {
-	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE,
-	  .idVendor		= SONY_VENDOR_ID,
-	  .idProduct		= RCS380_PRODUCT_ID,
-	},
+	{ USB_DEVICE(SONY_VENDOR_ID, RCS380_PRODUCT_ID), },
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, port100_table);
diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c
new file mode 100644
index 000000000000..d9babe986473
--- /dev/null
+++ b/drivers/nfc/trf7970a.c
@@ -0,0 +1,1370 @@
+/*
+ * TI TRF7970a RFID/NFC Transceiver Driver
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Erick Macias <emacias@ti.com>
+ * Author: Felipe Balbi <balbi@ti.com>
+ * Author: Mark A. Greer <mgreer@animalcreek.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/interrupt.h>
+#include <linux/nfc.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+
+#include <net/nfc/nfc.h>
+#include <net/nfc/digital.h>
+
+/* There are 3 ways the host can communicate with the trf7970a:
+ * parallel mode, SPI with Slave Select (SS) mode, and SPI without
+ * SS mode.  The driver only supports the two SPI modes.
+ *
+ * The trf7970a is very timing sensitive and the VIN, EN2, and EN
+ * pins must asserted in that order and with specific delays in between.
+ * The delays used in the driver were provided by TI and have been
+ * confirmed to work with this driver.
+ *
+ * Timeouts are implemented using the delayed workqueue kernel facility.
+ * Timeouts are required so things don't hang when there is no response
+ * from the trf7970a (or tag).  Using this mechanism creates a race with
+ * interrupts, however.  That is, an interrupt and a timeout could occur
+ * closely enough together that one is blocked by the mutex while the other
+ * executes.  When the timeout handler executes first and blocks the
+ * interrupt handler, it will eventually set the state to IDLE so the
+ * interrupt handler will check the state and exit with no harm done.
+ * When the interrupt handler executes first and blocks the timeout handler,
+ * the cancel_delayed_work() call will know that it didn't cancel the
+ * work item (i.e., timeout) and will return zero.  That return code is
+ * used by the timer handler to indicate that it should ignore the timeout
+ * once its unblocked.
+ *
+ * Aborting an active command isn't as simple as it seems because the only
+ * way to abort a command that's already been sent to the tag is so turn
+ * off power to the tag.  If we do that, though, we'd have to go through
+ * the entire anticollision procedure again but the digital layer doesn't
+ * support that.  So, if an abort is received before trf7970a_in_send_cmd()
+ * has sent the command to the tag, it simply returns -ECANCELED.  If the
+ * command has already been sent to the tag, then the driver continues
+ * normally and recieves the response data (or error) but just before
+ * sending the data upstream, it frees the rx_skb and sends -ECANCELED
+ * upstream instead.  If the command failed, that error will be sent
+ * upstream.
+ *
+ * When recieving data from a tag and the interrupt status register has
+ * only the SRX bit set, it means that all of the data has been received
+ * (once what's in the fifo has been read).  However, depending on timing
+ * an interrupt status with only the SRX bit set may not be recived.  In
+ * those cases, the timeout mechanism is used to wait 5 ms in case more
+ * data arrives.  After 5 ms, it is assumed that all of the data has been
+ * received and the accumulated rx data is sent upstream.  The
+ * 'TRF7970A_ST_WAIT_FOR_RX_DATA_CONT' state is used for this purpose
+ * (i.e., it indicates that some data has been received but we're not sure
+ * if there is more coming so a timeout in this state means all data has
+ * been received and there isn't an error).  The delay is 5 ms since delays
+ * over 2 ms have been observed during testing (a little extra just in case).
+ *
+ * Type 2 write and sector select commands respond with a 4-bit ACK or NACK.
+ * Having only 4 bits in the FIFO won't normally generate an interrupt so
+ * driver enables the '4_bit_RX' bit of the Special Functions register 1
+ * to cause an interrupt in that case.  Leaving that bit for a read command
+ * messes up the data returned so it is only enabled when the framing is
+ * 'NFC_DIGITAL_FRAMING_NFCA_T2T' and the command is not a read command.
+ * Unfortunately, that means that the driver has to peek into tx frames
+ * when the framing is 'NFC_DIGITAL_FRAMING_NFCA_T2T'.  This is done by
+ * the trf7970a_per_cmd_config() routine.
+ *
+ * ISO/IEC 15693 frames specify whether to use single or double sub-carrier
+ * frequencies and whether to use low or high data rates in the flags byte
+ * of the frame.  This means that the driver has to peek at all 15693 frames
+ * to determine what speed to set the communication to.  In addition, write
+ * and lock commands use the OPTION flag to indicate that an EOF must be
+ * sent to the tag before it will send its response.  So the driver has to
+ * examine all frames for that reason too.
+ *
+ * It is unclear how long to wait before sending the EOF.  According to the
+ * Note under Table 1-1 in section 1.6 of
+ * http://www.ti.com/lit/ug/scbu011/scbu011.pdf, that wait should be at least
+ * 10 ms for TI Tag-it HF-I tags; however testing has shown that is not long
+ * enough.  For this reason, the driver waits 20 ms which seems to work
+ * reliably.
+ */
+
+#define TRF7970A_SUPPORTED_PROTOCOLS \
+		(NFC_PROTO_MIFARE_MASK | NFC_PROTO_ISO14443_MASK |	\
+		 NFC_PROTO_ISO15693_MASK)
+
+/* TX data must be prefixed with a FIFO reset cmd, a cmd that depends
+ * on what the current framing is, the address of the TX length byte 1
+ * register (0x1d), and the 2 byte length of the data to be transmitted.
+ * That totals 5 bytes.
+ */
+#define TRF7970A_TX_SKB_HEADROOM		5
+
+#define TRF7970A_RX_SKB_ALLOC_SIZE		256
+
+#define TRF7970A_FIFO_SIZE			128
+
+/* TX length is 3 nibbles long ==> 4KB - 1 bytes max */
+#define TRF7970A_TX_MAX				(4096 - 1)
+
+#define TRF7970A_WAIT_FOR_RX_DATA_TIMEOUT	5
+#define TRF7970A_WAIT_FOR_FIFO_DRAIN_TIMEOUT	3
+#define TRF7970A_WAIT_TO_ISSUE_ISO15693_EOF	20
+
+/* Quirks */
+/* Erratum: When reading IRQ Status register on trf7970a, we must issue a
+ * read continuous command for IRQ Status and Collision Position registers.
+ */
+#define TRF7970A_QUIRK_IRQ_STATUS_READ_ERRATA	BIT(0)
+
+/* Direct commands */
+#define TRF7970A_CMD_IDLE			0x00
+#define TRF7970A_CMD_SOFT_INIT			0x03
+#define TRF7970A_CMD_RF_COLLISION		0x04
+#define TRF7970A_CMD_RF_COLLISION_RESPONSE_N	0x05
+#define TRF7970A_CMD_RF_COLLISION_RESPONSE_0	0x06
+#define TRF7970A_CMD_FIFO_RESET			0x0f
+#define TRF7970A_CMD_TRANSMIT_NO_CRC		0x10
+#define TRF7970A_CMD_TRANSMIT			0x11
+#define TRF7970A_CMD_DELAY_TRANSMIT_NO_CRC	0x12
+#define TRF7970A_CMD_DELAY_TRANSMIT		0x13
+#define TRF7970A_CMD_EOF			0x14
+#define TRF7970A_CMD_CLOSE_SLOT			0x15
+#define TRF7970A_CMD_BLOCK_RX			0x16
+#define TRF7970A_CMD_ENABLE_RX			0x17
+#define TRF7970A_CMD_TEST_EXT_RF		0x18
+#define TRF7970A_CMD_TEST_INT_RF		0x19
+#define TRF7970A_CMD_RX_GAIN_ADJUST		0x1a
+
+/* Bits determining whether its a direct command or register R/W,
+ * whether to use a continuous SPI transaction or not, and the actual
+ * direct cmd opcode or regster address.
+ */
+#define TRF7970A_CMD_BIT_CTRL			BIT(7)
+#define TRF7970A_CMD_BIT_RW			BIT(6)
+#define TRF7970A_CMD_BIT_CONTINUOUS		BIT(5)
+#define TRF7970A_CMD_BIT_OPCODE(opcode)		((opcode) & 0x1f)
+
+/* Registers addresses */
+#define TRF7970A_CHIP_STATUS_CTRL		0x00
+#define TRF7970A_ISO_CTRL			0x01
+#define TRF7970A_ISO14443B_TX_OPTIONS		0x02
+#define TRF7970A_ISO14443A_HIGH_BITRATE_OPTIONS	0x03
+#define TRF7970A_TX_TIMER_SETTING_H_BYTE	0x04
+#define TRF7970A_TX_TIMER_SETTING_L_BYTE	0x05
+#define TRF7970A_TX_PULSE_LENGTH_CTRL		0x06
+#define TRF7970A_RX_NO_RESPONSE_WAIT		0x07
+#define TRF7970A_RX_WAIT_TIME			0x08
+#define TRF7970A_MODULATOR_SYS_CLK_CTRL		0x09
+#define TRF7970A_RX_SPECIAL_SETTINGS		0x0a
+#define TRF7970A_REG_IO_CTRL			0x0b
+#define TRF7970A_IRQ_STATUS			0x0c
+#define TRF7970A_COLLISION_IRQ_MASK		0x0d
+#define TRF7970A_COLLISION_POSITION		0x0e
+#define TRF7970A_RSSI_OSC_STATUS		0x0f
+#define TRF7970A_SPECIAL_FCN_REG1		0x10
+#define TRF7970A_SPECIAL_FCN_REG2		0x11
+#define TRF7970A_RAM1				0x12
+#define TRF7970A_RAM2				0x13
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS	0x14
+#define TRF7970A_NFC_LOW_FIELD_LEVEL		0x16
+#define TRF7970A_NFCID1				0x17
+#define TRF7970A_NFC_TARGET_LEVEL		0x18
+#define TRF79070A_NFC_TARGET_PROTOCOL		0x19
+#define TRF7970A_TEST_REGISTER1			0x1a
+#define TRF7970A_TEST_REGISTER2			0x1b
+#define TRF7970A_FIFO_STATUS			0x1c
+#define TRF7970A_TX_LENGTH_BYTE1		0x1d
+#define TRF7970A_TX_LENGTH_BYTE2		0x1e
+#define TRF7970A_FIFO_IO_REGISTER		0x1f
+
+/* Chip Status Control Register Bits */
+#define TRF7970A_CHIP_STATUS_VRS5_3		BIT(0)
+#define TRF7970A_CHIP_STATUS_REC_ON		BIT(1)
+#define TRF7970A_CHIP_STATUS_AGC_ON		BIT(2)
+#define TRF7970A_CHIP_STATUS_PM_ON		BIT(3)
+#define TRF7970A_CHIP_STATUS_RF_PWR		BIT(4)
+#define TRF7970A_CHIP_STATUS_RF_ON		BIT(5)
+#define TRF7970A_CHIP_STATUS_DIRECT		BIT(6)
+#define TRF7970A_CHIP_STATUS_STBY		BIT(7)
+
+/* ISO Control Register Bits */
+#define TRF7970A_ISO_CTRL_15693_SGL_1OF4_662	0x00
+#define TRF7970A_ISO_CTRL_15693_SGL_1OF256_662	0x01
+#define TRF7970A_ISO_CTRL_15693_SGL_1OF4_2648	0x02
+#define TRF7970A_ISO_CTRL_15693_SGL_1OF256_2648	0x03
+#define TRF7970A_ISO_CTRL_15693_DBL_1OF4_667a	0x04
+#define TRF7970A_ISO_CTRL_15693_DBL_1OF256_667	0x05
+#define TRF7970A_ISO_CTRL_15693_DBL_1OF4_2669	0x06
+#define TRF7970A_ISO_CTRL_15693_DBL_1OF256_2669	0x07
+#define TRF7970A_ISO_CTRL_14443A_106		0x08
+#define TRF7970A_ISO_CTRL_14443A_212		0x09
+#define TRF7970A_ISO_CTRL_14443A_424		0x0a
+#define TRF7970A_ISO_CTRL_14443A_848		0x0b
+#define TRF7970A_ISO_CTRL_14443B_106		0x0c
+#define TRF7970A_ISO_CTRL_14443B_212		0x0d
+#define TRF7970A_ISO_CTRL_14443B_424		0x0e
+#define TRF7970A_ISO_CTRL_14443B_848		0x0f
+#define TRF7970A_ISO_CTRL_FELICA_212		0x1a
+#define TRF7970A_ISO_CTRL_FELICA_424		0x1b
+#define TRF7970A_ISO_CTRL_RFID			BIT(5)
+#define TRF7970A_ISO_CTRL_DIR_MODE		BIT(6)
+#define TRF7970A_ISO_CTRL_RX_CRC_N		BIT(7)	/* true == No CRC */
+
+#define TRF7970A_ISO_CTRL_RFID_SPEED_MASK	0x1f
+
+/* Modulator and SYS_CLK Control Register Bits */
+#define TRF7970A_MODULATOR_DEPTH(n)		((n) & 0x7)
+#define TRF7970A_MODULATOR_DEPTH_ASK10		(TRF7970A_MODULATOR_DEPTH(0))
+#define TRF7970A_MODULATOR_DEPTH_OOK		(TRF7970A_MODULATOR_DEPTH(1))
+#define TRF7970A_MODULATOR_DEPTH_ASK7		(TRF7970A_MODULATOR_DEPTH(2))
+#define TRF7970A_MODULATOR_DEPTH_ASK8_5		(TRF7970A_MODULATOR_DEPTH(3))
+#define TRF7970A_MODULATOR_DEPTH_ASK13		(TRF7970A_MODULATOR_DEPTH(4))
+#define TRF7970A_MODULATOR_DEPTH_ASK16		(TRF7970A_MODULATOR_DEPTH(5))
+#define TRF7970A_MODULATOR_DEPTH_ASK22		(TRF7970A_MODULATOR_DEPTH(6))
+#define TRF7970A_MODULATOR_DEPTH_ASK30		(TRF7970A_MODULATOR_DEPTH(7))
+#define TRF7970A_MODULATOR_EN_ANA		BIT(3)
+#define TRF7970A_MODULATOR_CLK(n)		(((n) & 0x3) << 4)
+#define TRF7970A_MODULATOR_CLK_DISABLED		(TRF7970A_MODULATOR_CLK(0))
+#define TRF7970A_MODULATOR_CLK_3_6		(TRF7970A_MODULATOR_CLK(1))
+#define TRF7970A_MODULATOR_CLK_6_13		(TRF7970A_MODULATOR_CLK(2))
+#define TRF7970A_MODULATOR_CLK_13_27		(TRF7970A_MODULATOR_CLK(3))
+#define TRF7970A_MODULATOR_EN_OOK		BIT(6)
+#define TRF7970A_MODULATOR_27MHZ		BIT(7)
+
+/* IRQ Status Register Bits */
+#define TRF7970A_IRQ_STATUS_NORESP		BIT(0) /* ISO15693 only */
+#define TRF7970A_IRQ_STATUS_COL			BIT(1)
+#define TRF7970A_IRQ_STATUS_FRAMING_EOF_ERROR	BIT(2)
+#define TRF7970A_IRQ_STATUS_PARITY_ERROR	BIT(3)
+#define TRF7970A_IRQ_STATUS_CRC_ERROR		BIT(4)
+#define TRF7970A_IRQ_STATUS_FIFO		BIT(5)
+#define TRF7970A_IRQ_STATUS_SRX			BIT(6)
+#define TRF7970A_IRQ_STATUS_TX			BIT(7)
+
+#define TRF7970A_IRQ_STATUS_ERROR				\
+		(TRF7970A_IRQ_STATUS_COL |			\
+		 TRF7970A_IRQ_STATUS_FRAMING_EOF_ERROR |	\
+		 TRF7970A_IRQ_STATUS_PARITY_ERROR |		\
+		 TRF7970A_IRQ_STATUS_CRC_ERROR)
+
+#define TRF7970A_SPECIAL_FCN_REG1_COL_7_6		BIT(0)
+#define TRF7970A_SPECIAL_FCN_REG1_14_ANTICOLL		BIT(1)
+#define TRF7970A_SPECIAL_FCN_REG1_4_BIT_RX		BIT(2)
+#define TRF7970A_SPECIAL_FCN_REG1_SP_DIR_MODE		BIT(3)
+#define TRF7970A_SPECIAL_FCN_REG1_NEXT_SLOT_37US	BIT(4)
+#define TRF7970A_SPECIAL_FCN_REG1_PAR43			BIT(5)
+
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_124	(0x0 << 2)
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_120	(0x1 << 2)
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_112	(0x2 << 2)
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_96	(0x3 << 2)
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_4	0x0
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_8	0x1
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_16	0x2
+#define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_32	0x3
+
+#define TRF7970A_FIFO_STATUS_OVERFLOW		BIT(7)
+
+/* NFC (ISO/IEC 14443A) Type 2 Tag commands */
+#define NFC_T2T_CMD_READ			0x30
+
+/* ISO 15693 commands codes */
+#define ISO15693_CMD_INVENTORY			0x01
+#define ISO15693_CMD_READ_SINGLE_BLOCK		0x20
+#define ISO15693_CMD_WRITE_SINGLE_BLOCK		0x21
+#define ISO15693_CMD_LOCK_BLOCK			0x22
+#define ISO15693_CMD_READ_MULTIPLE_BLOCK	0x23
+#define ISO15693_CMD_WRITE_MULTIPLE_BLOCK	0x24
+#define ISO15693_CMD_SELECT			0x25
+#define ISO15693_CMD_RESET_TO_READY		0x26
+#define ISO15693_CMD_WRITE_AFI			0x27
+#define ISO15693_CMD_LOCK_AFI			0x28
+#define ISO15693_CMD_WRITE_DSFID		0x29
+#define ISO15693_CMD_LOCK_DSFID			0x2a
+#define ISO15693_CMD_GET_SYSTEM_INFO		0x2b
+#define ISO15693_CMD_GET_MULTIPLE_BLOCK_SECURITY_STATUS	0x2c
+
+/* ISO 15693 request and response flags */
+#define ISO15693_REQ_FLAG_SUB_CARRIER		BIT(0)
+#define ISO15693_REQ_FLAG_DATA_RATE		BIT(1)
+#define ISO15693_REQ_FLAG_INVENTORY		BIT(2)
+#define ISO15693_REQ_FLAG_PROTOCOL_EXT		BIT(3)
+#define ISO15693_REQ_FLAG_SELECT		BIT(4)
+#define ISO15693_REQ_FLAG_AFI			BIT(4)
+#define ISO15693_REQ_FLAG_ADDRESS		BIT(5)
+#define ISO15693_REQ_FLAG_NB_SLOTS		BIT(5)
+#define ISO15693_REQ_FLAG_OPTION		BIT(6)
+
+#define ISO15693_REQ_FLAG_SPEED_MASK \
+		(ISO15693_REQ_FLAG_SUB_CARRIER | ISO15693_REQ_FLAG_DATA_RATE)
+
+enum trf7970a_state {
+	TRF7970A_ST_OFF,
+	TRF7970A_ST_IDLE,
+	TRF7970A_ST_IDLE_RX_BLOCKED,
+	TRF7970A_ST_WAIT_FOR_TX_FIFO,
+	TRF7970A_ST_WAIT_FOR_RX_DATA,
+	TRF7970A_ST_WAIT_FOR_RX_DATA_CONT,
+	TRF7970A_ST_WAIT_TO_ISSUE_EOF,
+	TRF7970A_ST_MAX
+};
+
+struct trf7970a {
+	enum trf7970a_state		state;
+	struct device			*dev;
+	struct spi_device		*spi;
+	struct regulator		*regulator;
+	struct nfc_digital_dev		*ddev;
+	u32				quirks;
+	bool				powering_up;
+	bool				aborting;
+	struct sk_buff			*tx_skb;
+	struct sk_buff			*rx_skb;
+	nfc_digital_cmd_complete_t	cb;
+	void				*cb_arg;
+	u8				iso_ctrl;
+	u8				special_fcn_reg1;
+	int				technology;
+	int				framing;
+	u8				tx_cmd;
+	bool				issue_eof;
+	int				en2_gpio;
+	int				en_gpio;
+	struct mutex			lock;
+	unsigned int			timeout;
+	bool				ignore_timeout;
+	struct delayed_work		timeout_work;
+};
+
+
+static int trf7970a_cmd(struct trf7970a *trf, u8 opcode)
+{
+	u8 cmd = TRF7970A_CMD_BIT_CTRL | TRF7970A_CMD_BIT_OPCODE(opcode);
+	int ret;
+
+	dev_dbg(trf->dev, "cmd: 0x%x\n", cmd);
+
+	ret = spi_write(trf->spi, &cmd, 1);
+	if (ret)
+		dev_err(trf->dev, "%s - cmd: 0x%x, ret: %d\n", __func__, cmd,
+				ret);
+	return ret;
+}
+
+static int trf7970a_read(struct trf7970a *trf, u8 reg, u8 *val)
+{
+	u8 addr = TRF7970A_CMD_BIT_RW | reg;
+	int ret;
+
+	ret = spi_write_then_read(trf->spi, &addr, 1, val, 1);
+	if (ret)
+		dev_err(trf->dev, "%s - addr: 0x%x, ret: %d\n", __func__, addr,
+				ret);
+
+	dev_dbg(trf->dev, "read(0x%x): 0x%x\n", addr, *val);
+
+	return ret;
+}
+
+static int trf7970a_read_cont(struct trf7970a *trf, u8 reg,
+		u8 *buf, size_t len)
+{
+	u8 addr = reg | TRF7970A_CMD_BIT_RW | TRF7970A_CMD_BIT_CONTINUOUS;
+	int ret;
+
+	dev_dbg(trf->dev, "read_cont(0x%x, %zd)\n", addr, len);
+
+	ret = spi_write_then_read(trf->spi, &addr, 1, buf, len);
+	if (ret)
+		dev_err(trf->dev, "%s - addr: 0x%x, ret: %d\n", __func__, addr,
+				ret);
+	return ret;
+}
+
+static int trf7970a_write(struct trf7970a *trf, u8 reg, u8 val)
+{
+	u8 buf[2] = { reg, val };
+	int ret;
+
+	dev_dbg(trf->dev, "write(0x%x): 0x%x\n", reg, val);
+
+	ret = spi_write(trf->spi, buf, 2);
+	if (ret)
+		dev_err(trf->dev, "%s - write: 0x%x 0x%x, ret: %d\n", __func__,
+				buf[0], buf[1], ret);
+
+	return ret;
+}
+
+static int trf7970a_read_irqstatus(struct trf7970a *trf, u8 *status)
+{
+	int ret;
+	u8 buf[2];
+	u8 addr;
+
+	addr = TRF7970A_IRQ_STATUS | TRF7970A_CMD_BIT_RW;
+
+	if (trf->quirks & TRF7970A_QUIRK_IRQ_STATUS_READ_ERRATA) {
+		addr |= TRF7970A_CMD_BIT_CONTINUOUS;
+		ret = spi_write_then_read(trf->spi, &addr, 1, buf, 2);
+	} else {
+		ret = spi_write_then_read(trf->spi, &addr, 1, buf, 1);
+	}
+
+	if (ret)
+		dev_err(trf->dev, "%s - irqstatus: Status read failed: %d\n",
+				__func__, ret);
+	else
+		*status = buf[0];
+
+	return ret;
+}
+
+static void trf7970a_send_upstream(struct trf7970a *trf)
+{
+	u8 rssi;
+
+	dev_kfree_skb_any(trf->tx_skb);
+	trf->tx_skb = NULL;
+
+	if (trf->rx_skb && !IS_ERR(trf->rx_skb) && !trf->aborting)
+		print_hex_dump_debug("trf7970a rx data: ", DUMP_PREFIX_NONE,
+				16, 1, trf->rx_skb->data, trf->rx_skb->len,
+				false);
+
+	/* According to the manual it is "good form" to reset the fifo and
+	 * read the RSSI levels & oscillator status register here.  It doesn't
+	 * explain why.
+	 */
+	trf7970a_cmd(trf, TRF7970A_CMD_FIFO_RESET);
+	trf7970a_read(trf, TRF7970A_RSSI_OSC_STATUS, &rssi);
+
+	trf->state = TRF7970A_ST_IDLE;
+
+	if (trf->aborting) {
+		dev_dbg(trf->dev, "Abort process complete\n");
+
+		if (!IS_ERR(trf->rx_skb)) {
+			kfree_skb(trf->rx_skb);
+			trf->rx_skb = ERR_PTR(-ECANCELED);
+		}
+
+		trf->aborting = false;
+	}
+
+	trf->cb(trf->ddev, trf->cb_arg, trf->rx_skb);
+
+	trf->rx_skb = NULL;
+}
+
+static void trf7970a_send_err_upstream(struct trf7970a *trf, int errno)
+{
+	dev_dbg(trf->dev, "Error - state: %d, errno: %d\n", trf->state, errno);
+
+	kfree_skb(trf->rx_skb);
+	trf->rx_skb = ERR_PTR(errno);
+
+	trf7970a_send_upstream(trf);
+}
+
+static int trf7970a_transmit(struct trf7970a *trf, struct sk_buff *skb,
+		unsigned int len)
+{
+	unsigned int timeout;
+	int ret;
+
+	print_hex_dump_debug("trf7970a tx data: ", DUMP_PREFIX_NONE,
+			16, 1, skb->data, len, false);
+
+	ret = spi_write(trf->spi, skb->data, len);
+	if (ret) {
+		dev_err(trf->dev, "%s - Can't send tx data: %d\n", __func__,
+				ret);
+		return ret;
+	}
+
+	skb_pull(skb, len);
+
+	if (skb->len > 0) {
+		trf->state = TRF7970A_ST_WAIT_FOR_TX_FIFO;
+		timeout = TRF7970A_WAIT_FOR_FIFO_DRAIN_TIMEOUT;
+	} else {
+		if (trf->issue_eof) {
+			trf->state = TRF7970A_ST_WAIT_TO_ISSUE_EOF;
+			timeout = TRF7970A_WAIT_TO_ISSUE_ISO15693_EOF;
+		} else {
+			trf->state = TRF7970A_ST_WAIT_FOR_RX_DATA;
+			timeout = trf->timeout;
+		}
+	}
+
+	dev_dbg(trf->dev, "Setting timeout for %d ms, state: %d\n", timeout,
+			trf->state);
+
+	schedule_delayed_work(&trf->timeout_work, msecs_to_jiffies(timeout));
+
+	return 0;
+}
+
+static void trf7970a_fill_fifo(struct trf7970a *trf)
+{
+	struct sk_buff *skb = trf->tx_skb;
+	unsigned int len;
+	int ret;
+	u8 fifo_bytes;
+
+	ret = trf7970a_read(trf, TRF7970A_FIFO_STATUS, &fifo_bytes);
+	if (ret) {
+		trf7970a_send_err_upstream(trf, ret);
+		return;
+	}
+
+	dev_dbg(trf->dev, "Filling FIFO - fifo_bytes: 0x%x\n", fifo_bytes);
+
+	if (fifo_bytes & TRF7970A_FIFO_STATUS_OVERFLOW) {
+		dev_err(trf->dev, "%s - fifo overflow: 0x%x\n", __func__,
+				fifo_bytes);
+		trf7970a_send_err_upstream(trf, -EIO);
+		return;
+	}
+
+	/* Calculate how much more data can be written to the fifo */
+	len = TRF7970A_FIFO_SIZE - fifo_bytes;
+	len = min(skb->len, len);
+
+	ret = trf7970a_transmit(trf, skb, len);
+	if (ret)
+		trf7970a_send_err_upstream(trf, ret);
+}
+
+static void trf7970a_drain_fifo(struct trf7970a *trf, u8 status)
+{
+	struct sk_buff *skb = trf->rx_skb;
+	int ret;
+	u8 fifo_bytes;
+
+	if (status & TRF7970A_IRQ_STATUS_ERROR) {
+		trf7970a_send_err_upstream(trf, -EIO);
+		return;
+	}
+
+	ret = trf7970a_read(trf, TRF7970A_FIFO_STATUS, &fifo_bytes);
+	if (ret) {
+		trf7970a_send_err_upstream(trf, ret);
+		return;
+	}
+
+	dev_dbg(trf->dev, "Draining FIFO - fifo_bytes: 0x%x\n", fifo_bytes);
+
+	if (!fifo_bytes)
+		goto no_rx_data;
+
+	if (fifo_bytes & TRF7970A_FIFO_STATUS_OVERFLOW) {
+		dev_err(trf->dev, "%s - fifo overflow: 0x%x\n", __func__,
+				fifo_bytes);
+		trf7970a_send_err_upstream(trf, -EIO);
+		return;
+	}
+
+	if (fifo_bytes > skb_tailroom(skb)) {
+		skb = skb_copy_expand(skb, skb_headroom(skb),
+				max_t(int, fifo_bytes,
+					TRF7970A_RX_SKB_ALLOC_SIZE),
+				GFP_KERNEL);
+		if (!skb) {
+			trf7970a_send_err_upstream(trf, -ENOMEM);
+			return;
+		}
+
+		kfree_skb(trf->rx_skb);
+		trf->rx_skb = skb;
+	}
+
+	ret = trf7970a_read_cont(trf, TRF7970A_FIFO_IO_REGISTER,
+			skb_put(skb, fifo_bytes), fifo_bytes);
+	if (ret) {
+		trf7970a_send_err_upstream(trf, ret);
+		return;
+	}
+
+	/* If received Type 2 ACK/NACK, shift right 4 bits and pass up */
+	if ((trf->framing == NFC_DIGITAL_FRAMING_NFCA_T2T) && (skb->len == 1) &&
+			(trf->special_fcn_reg1 ==
+				 TRF7970A_SPECIAL_FCN_REG1_4_BIT_RX)) {
+		skb->data[0] >>= 4;
+		status = TRF7970A_IRQ_STATUS_SRX;
+	} else {
+		trf->state = TRF7970A_ST_WAIT_FOR_RX_DATA_CONT;
+	}
+
+no_rx_data:
+	if (status == TRF7970A_IRQ_STATUS_SRX) { /* Receive complete */
+		trf7970a_send_upstream(trf);
+		return;
+	}
+
+	dev_dbg(trf->dev, "Setting timeout for %d ms\n",
+			TRF7970A_WAIT_FOR_RX_DATA_TIMEOUT);
+
+	schedule_delayed_work(&trf->timeout_work,
+			msecs_to_jiffies(TRF7970A_WAIT_FOR_RX_DATA_TIMEOUT));
+}
+
+static irqreturn_t trf7970a_irq(int irq, void *dev_id)
+{
+	struct trf7970a *trf = dev_id;
+	int ret;
+	u8 status;
+
+	mutex_lock(&trf->lock);
+
+	if (trf->state == TRF7970A_ST_OFF) {
+		mutex_unlock(&trf->lock);
+		return IRQ_NONE;
+	}
+
+	ret = trf7970a_read_irqstatus(trf, &status);
+	if (ret) {
+		mutex_unlock(&trf->lock);
+		return IRQ_NONE;
+	}
+
+	dev_dbg(trf->dev, "IRQ - state: %d, status: 0x%x\n", trf->state,
+			status);
+
+	if (!status) {
+		mutex_unlock(&trf->lock);
+		return IRQ_NONE;
+	}
+
+	switch (trf->state) {
+	case TRF7970A_ST_IDLE:
+	case TRF7970A_ST_IDLE_RX_BLOCKED:
+		/* If getting interrupts caused by RF noise, turn off the
+		 * receiver to avoid unnecessary interrupts.  It will be
+		 * turned back on in trf7970a_in_send_cmd() when the next
+		 * command is issued.
+		 */
+		if (status & TRF7970A_IRQ_STATUS_ERROR) {
+			trf7970a_cmd(trf, TRF7970A_CMD_BLOCK_RX);
+			trf->state = TRF7970A_ST_IDLE_RX_BLOCKED;
+		}
+
+		trf7970a_cmd(trf, TRF7970A_CMD_FIFO_RESET);
+		break;
+	case TRF7970A_ST_WAIT_FOR_TX_FIFO:
+		if (status & TRF7970A_IRQ_STATUS_TX) {
+			trf->ignore_timeout =
+				!cancel_delayed_work(&trf->timeout_work);
+			trf7970a_fill_fifo(trf);
+		} else {
+			trf7970a_send_err_upstream(trf, -EIO);
+		}
+		break;
+	case TRF7970A_ST_WAIT_FOR_RX_DATA:
+	case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT:
+		if (status & TRF7970A_IRQ_STATUS_SRX) {
+			trf->ignore_timeout =
+				!cancel_delayed_work(&trf->timeout_work);
+			trf7970a_drain_fifo(trf, status);
+		} else if (!(status & TRF7970A_IRQ_STATUS_TX)) {
+			trf7970a_send_err_upstream(trf, -EIO);
+		}
+		break;
+	case TRF7970A_ST_WAIT_TO_ISSUE_EOF:
+		if (status != TRF7970A_IRQ_STATUS_TX)
+			trf7970a_send_err_upstream(trf, -EIO);
+		break;
+	default:
+		dev_err(trf->dev, "%s - Driver in invalid state: %d\n",
+				__func__, trf->state);
+	}
+
+	mutex_unlock(&trf->lock);
+	return IRQ_HANDLED;
+}
+
+static void trf7970a_issue_eof(struct trf7970a *trf)
+{
+	int ret;
+
+	dev_dbg(trf->dev, "Issuing EOF\n");
+
+	ret = trf7970a_cmd(trf, TRF7970A_CMD_FIFO_RESET);
+	if (ret)
+		trf7970a_send_err_upstream(trf, ret);
+
+	ret = trf7970a_cmd(trf, TRF7970A_CMD_EOF);
+	if (ret)
+		trf7970a_send_err_upstream(trf, ret);
+
+	trf->state = TRF7970A_ST_WAIT_FOR_RX_DATA;
+
+	dev_dbg(trf->dev, "Setting timeout for %d ms, state: %d\n",
+			trf->timeout, trf->state);
+
+	schedule_delayed_work(&trf->timeout_work,
+			msecs_to_jiffies(trf->timeout));
+}
+
+static void trf7970a_timeout_work_handler(struct work_struct *work)
+{
+	struct trf7970a *trf = container_of(work, struct trf7970a,
+			timeout_work.work);
+
+	dev_dbg(trf->dev, "Timeout - state: %d, ignore_timeout: %d\n",
+			trf->state, trf->ignore_timeout);
+
+	mutex_lock(&trf->lock);
+
+	if (trf->ignore_timeout)
+		trf->ignore_timeout = false;
+	else if (trf->state == TRF7970A_ST_WAIT_FOR_RX_DATA_CONT)
+		trf7970a_send_upstream(trf); /* No more rx data so send up */
+	else if (trf->state == TRF7970A_ST_WAIT_TO_ISSUE_EOF)
+		trf7970a_issue_eof(trf);
+	else
+		trf7970a_send_err_upstream(trf, -ETIMEDOUT);
+
+	mutex_unlock(&trf->lock);
+}
+
+static int trf7970a_init(struct trf7970a *trf)
+{
+	int ret;
+
+	dev_dbg(trf->dev, "Initializing device - state: %d\n", trf->state);
+
+	ret = trf7970a_cmd(trf, TRF7970A_CMD_SOFT_INIT);
+	if (ret)
+		goto err_out;
+
+	ret = trf7970a_cmd(trf, TRF7970A_CMD_IDLE);
+	if (ret)
+		goto err_out;
+
+	ret = trf7970a_write(trf, TRF7970A_MODULATOR_SYS_CLK_CTRL,
+			TRF7970A_MODULATOR_DEPTH_OOK);
+	if (ret)
+		goto err_out;
+
+	ret = trf7970a_write(trf, TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS,
+			TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_96 |
+			TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_32);
+	if (ret)
+		goto err_out;
+
+	ret = trf7970a_write(trf, TRF7970A_SPECIAL_FCN_REG1, 0);
+	if (ret)
+		goto err_out;
+
+	trf->special_fcn_reg1 = 0;
+
+	ret = trf7970a_write(trf, TRF7970A_CHIP_STATUS_CTRL,
+			TRF7970A_CHIP_STATUS_RF_ON |
+				TRF7970A_CHIP_STATUS_VRS5_3);
+	if (ret)
+		goto err_out;
+
+	return 0;
+
+err_out:
+	dev_dbg(trf->dev, "Couldn't init device: %d\n", ret);
+	return ret;
+}
+
+static void trf7970a_switch_rf_off(struct trf7970a *trf)
+{
+	dev_dbg(trf->dev, "Switching rf off\n");
+
+	gpio_set_value(trf->en_gpio, 0);
+	gpio_set_value(trf->en2_gpio, 0);
+
+	trf->aborting = false;
+	trf->state = TRF7970A_ST_OFF;
+}
+
+static int trf7970a_switch_rf_on(struct trf7970a *trf)
+{
+	unsigned long delay;
+	int ret;
+
+	dev_dbg(trf->dev, "Switching rf on\n");
+
+	if (trf->powering_up)
+		usleep_range(5000, 6000);
+
+	gpio_set_value(trf->en2_gpio, 1);
+	usleep_range(1000, 2000);
+	gpio_set_value(trf->en_gpio, 1);
+
+	/* The delay between enabling the trf7970a and issuing the first
+	 * command is significantly longer the very first time after powering
+	 * up.  Make sure the longer delay is only done the first time.
+	 */
+	if (trf->powering_up) {
+		delay = 20000;
+		trf->powering_up = false;
+	} else {
+		delay = 5000;
+	}
+
+	usleep_range(delay, delay + 1000);
+
+	ret = trf7970a_init(trf);
+	if (ret)
+		trf7970a_switch_rf_off(trf);
+	else
+		trf->state = TRF7970A_ST_IDLE;
+
+	return ret;
+}
+
+static int trf7970a_switch_rf(struct nfc_digital_dev *ddev, bool on)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+	int ret = 0;
+
+	dev_dbg(trf->dev, "Switching RF - state: %d, on: %d\n", trf->state, on);
+
+	mutex_lock(&trf->lock);
+
+	if (on) {
+		switch (trf->state) {
+		case TRF7970A_ST_OFF:
+			ret = trf7970a_switch_rf_on(trf);
+			break;
+		case TRF7970A_ST_IDLE:
+		case TRF7970A_ST_IDLE_RX_BLOCKED:
+			break;
+		default:
+			dev_err(trf->dev, "%s - Invalid request: %d %d\n",
+					__func__, trf->state, on);
+			trf7970a_switch_rf_off(trf);
+		}
+	} else {
+		switch (trf->state) {
+		case TRF7970A_ST_OFF:
+			break;
+		default:
+			dev_err(trf->dev, "%s - Invalid request: %d %d\n",
+					__func__, trf->state, on);
+			/* FALLTHROUGH */
+		case TRF7970A_ST_IDLE:
+		case TRF7970A_ST_IDLE_RX_BLOCKED:
+			trf7970a_switch_rf_off(trf);
+		}
+	}
+
+	mutex_unlock(&trf->lock);
+	return ret;
+}
+
+static int trf7970a_config_rf_tech(struct trf7970a *trf, int tech)
+{
+	int ret = 0;
+
+	dev_dbg(trf->dev, "rf technology: %d\n", tech);
+
+	switch (tech) {
+	case NFC_DIGITAL_RF_TECH_106A:
+		trf->iso_ctrl = TRF7970A_ISO_CTRL_14443A_106;
+		break;
+	case NFC_DIGITAL_RF_TECH_ISO15693:
+		trf->iso_ctrl = TRF7970A_ISO_CTRL_15693_SGL_1OF4_2648;
+		break;
+	default:
+		dev_dbg(trf->dev, "Unsupported rf technology: %d\n", tech);
+		return -EINVAL;
+	}
+
+	trf->technology = tech;
+
+	return ret;
+}
+
+static int trf7970a_config_framing(struct trf7970a *trf, int framing)
+{
+	dev_dbg(trf->dev, "framing: %d\n", framing);
+
+	switch (framing) {
+	case NFC_DIGITAL_FRAMING_NFCA_SHORT:
+	case NFC_DIGITAL_FRAMING_NFCA_STANDARD:
+		trf->tx_cmd = TRF7970A_CMD_TRANSMIT_NO_CRC;
+		trf->iso_ctrl |= TRF7970A_ISO_CTRL_RX_CRC_N;
+		break;
+	case NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A:
+	case NFC_DIGITAL_FRAMING_NFCA_T4T:
+	case NFC_DIGITAL_FRAMING_ISO15693_INVENTORY:
+	case NFC_DIGITAL_FRAMING_ISO15693_T5T:
+		trf->tx_cmd = TRF7970A_CMD_TRANSMIT;
+		trf->iso_ctrl &= ~TRF7970A_ISO_CTRL_RX_CRC_N;
+		break;
+	case NFC_DIGITAL_FRAMING_NFCA_T2T:
+		trf->tx_cmd = TRF7970A_CMD_TRANSMIT;
+		trf->iso_ctrl |= TRF7970A_ISO_CTRL_RX_CRC_N;
+		break;
+	default:
+		dev_dbg(trf->dev, "Unsupported Framing: %d\n", framing);
+		return -EINVAL;
+	}
+
+	trf->framing = framing;
+
+	return trf7970a_write(trf, TRF7970A_ISO_CTRL, trf->iso_ctrl);
+}
+
+static int trf7970a_in_configure_hw(struct nfc_digital_dev *ddev, int type,
+		int param)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+	int ret = 0;
+
+	dev_dbg(trf->dev, "Configure hw - type: %d, param: %d\n", type, param);
+
+	mutex_lock(&trf->lock);
+
+	if (trf->state == TRF7970A_ST_OFF) {
+		ret = trf7970a_switch_rf_on(trf);
+		if (ret)
+			goto err_out;
+	}
+
+	switch (type) {
+	case NFC_DIGITAL_CONFIG_RF_TECH:
+		ret = trf7970a_config_rf_tech(trf, param);
+		break;
+	case NFC_DIGITAL_CONFIG_FRAMING:
+		ret = trf7970a_config_framing(trf, param);
+		break;
+	default:
+		dev_dbg(trf->dev, "Unknown type: %d\n", type);
+		ret = -EINVAL;
+	}
+
+err_out:
+	mutex_unlock(&trf->lock);
+	return ret;
+}
+
+static int trf7970a_is_iso15693_write_or_lock(u8 cmd)
+{
+	switch (cmd) {
+	case ISO15693_CMD_WRITE_SINGLE_BLOCK:
+	case ISO15693_CMD_LOCK_BLOCK:
+	case ISO15693_CMD_WRITE_MULTIPLE_BLOCK:
+	case ISO15693_CMD_WRITE_AFI:
+	case ISO15693_CMD_LOCK_AFI:
+	case ISO15693_CMD_WRITE_DSFID:
+	case ISO15693_CMD_LOCK_DSFID:
+		return 1;
+		break;
+	default:
+		return 0;
+	}
+}
+
+static int trf7970a_per_cmd_config(struct trf7970a *trf, struct sk_buff *skb)
+{
+	u8 *req = skb->data;
+	u8 special_fcn_reg1, iso_ctrl;
+	int ret;
+
+	trf->issue_eof = false;
+
+	/* When issuing Type 2 read command, make sure the '4_bit_RX' bit in
+	 * special functions register 1 is cleared; otherwise, its a write or
+	 * sector select command and '4_bit_RX' must be set.
+	 *
+	 * When issuing an ISO 15693 command, inspect the flags byte to see
+	 * what speed to use.  Also, remember if the OPTION flag is set on
+	 * a Type 5 write or lock command so the driver will know that it
+	 * has to send an EOF in order to get a response.
+	 */
+	if ((trf->technology == NFC_DIGITAL_RF_TECH_106A) &&
+			(trf->framing == NFC_DIGITAL_FRAMING_NFCA_T2T)) {
+		if (req[0] == NFC_T2T_CMD_READ)
+			special_fcn_reg1 = 0;
+		else
+			special_fcn_reg1 = TRF7970A_SPECIAL_FCN_REG1_4_BIT_RX;
+
+		if (special_fcn_reg1 != trf->special_fcn_reg1) {
+			ret = trf7970a_write(trf, TRF7970A_SPECIAL_FCN_REG1,
+					special_fcn_reg1);
+			if (ret)
+				return ret;
+
+			trf->special_fcn_reg1 = special_fcn_reg1;
+		}
+	} else if (trf->technology == NFC_DIGITAL_RF_TECH_ISO15693) {
+		iso_ctrl = trf->iso_ctrl & ~TRF7970A_ISO_CTRL_RFID_SPEED_MASK;
+
+		switch (req[0] & ISO15693_REQ_FLAG_SPEED_MASK) {
+		case 0x00:
+			iso_ctrl |= TRF7970A_ISO_CTRL_15693_SGL_1OF4_662;
+			break;
+		case ISO15693_REQ_FLAG_SUB_CARRIER:
+			iso_ctrl |= TRF7970A_ISO_CTRL_15693_DBL_1OF4_667a;
+			break;
+		case ISO15693_REQ_FLAG_DATA_RATE:
+			iso_ctrl |= TRF7970A_ISO_CTRL_15693_SGL_1OF4_2648;
+			break;
+		case (ISO15693_REQ_FLAG_SUB_CARRIER |
+				ISO15693_REQ_FLAG_DATA_RATE):
+			iso_ctrl |= TRF7970A_ISO_CTRL_15693_DBL_1OF4_2669;
+			break;
+		}
+
+		if (iso_ctrl != trf->iso_ctrl) {
+			ret = trf7970a_write(trf, TRF7970A_ISO_CTRL, iso_ctrl);
+			if (ret)
+				return ret;
+
+			trf->iso_ctrl = iso_ctrl;
+		}
+
+		if ((trf->framing == NFC_DIGITAL_FRAMING_ISO15693_T5T) &&
+				trf7970a_is_iso15693_write_or_lock(req[1]) &&
+				(req[0] & ISO15693_REQ_FLAG_OPTION))
+			trf->issue_eof = true;
+	}
+
+	return 0;
+}
+
+static int trf7970a_in_send_cmd(struct nfc_digital_dev *ddev,
+		struct sk_buff *skb, u16 timeout,
+		nfc_digital_cmd_complete_t cb, void *arg)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+	char *prefix;
+	unsigned int len;
+	int ret;
+
+	dev_dbg(trf->dev, "New request - state: %d, timeout: %d ms, len: %d\n",
+			trf->state, timeout, skb->len);
+
+	if (skb->len > TRF7970A_TX_MAX)
+		return -EINVAL;
+
+	mutex_lock(&trf->lock);
+
+	if ((trf->state != TRF7970A_ST_IDLE) &&
+			(trf->state != TRF7970A_ST_IDLE_RX_BLOCKED)) {
+		dev_err(trf->dev, "%s - Bogus state: %d\n", __func__,
+				trf->state);
+		ret = -EIO;
+		goto out_err;
+	}
+
+	if (trf->aborting) {
+		dev_dbg(trf->dev, "Abort process complete\n");
+		trf->aborting = false;
+		ret = -ECANCELED;
+		goto out_err;
+	}
+
+	trf->rx_skb = nfc_alloc_recv_skb(TRF7970A_RX_SKB_ALLOC_SIZE,
+			GFP_KERNEL);
+	if (!trf->rx_skb) {
+		dev_dbg(trf->dev, "Can't alloc rx_skb\n");
+		ret = -ENOMEM;
+		goto out_err;
+	}
+
+	if (trf->state == TRF7970A_ST_IDLE_RX_BLOCKED) {
+		ret = trf7970a_cmd(trf, TRF7970A_CMD_ENABLE_RX);
+		if (ret)
+			goto out_err;
+
+		trf->state = TRF7970A_ST_IDLE;
+	}
+
+	ret = trf7970a_per_cmd_config(trf, skb);
+	if (ret)
+		goto out_err;
+
+	trf->ddev = ddev;
+	trf->tx_skb = skb;
+	trf->cb = cb;
+	trf->cb_arg = arg;
+	trf->timeout = timeout;
+	trf->ignore_timeout = false;
+
+	len = skb->len;
+	prefix = skb_push(skb, TRF7970A_TX_SKB_HEADROOM);
+
+	/* TX data must be prefixed with a FIFO reset cmd, a cmd that depends
+	 * on what the current framing is, the address of the TX length byte 1
+	 * register (0x1d), and the 2 byte length of the data to be transmitted.
+	 */
+	prefix[0] = TRF7970A_CMD_BIT_CTRL |
+			TRF7970A_CMD_BIT_OPCODE(TRF7970A_CMD_FIFO_RESET);
+	prefix[1] = TRF7970A_CMD_BIT_CTRL |
+			TRF7970A_CMD_BIT_OPCODE(trf->tx_cmd);
+	prefix[2] = TRF7970A_CMD_BIT_CONTINUOUS | TRF7970A_TX_LENGTH_BYTE1;
+
+	if (trf->framing == NFC_DIGITAL_FRAMING_NFCA_SHORT) {
+		prefix[3] = 0x00;
+		prefix[4] = 0x0f; /* 7 bits */
+	} else {
+		prefix[3] = (len & 0xf00) >> 4;
+		prefix[3] |= ((len & 0xf0) >> 4);
+		prefix[4] = ((len & 0x0f) << 4);
+	}
+
+	len = min_t(int, skb->len, TRF7970A_FIFO_SIZE);
+
+	usleep_range(1000, 2000);
+
+	ret = trf7970a_transmit(trf, skb, len);
+	if (ret) {
+		kfree_skb(trf->rx_skb);
+		trf->rx_skb = NULL;
+	}
+
+out_err:
+	mutex_unlock(&trf->lock);
+	return ret;
+}
+
+static int trf7970a_tg_configure_hw(struct nfc_digital_dev *ddev,
+		int type, int param)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+
+	dev_dbg(trf->dev, "Unsupported interface\n");
+
+	return -EINVAL;
+}
+
+static int trf7970a_tg_send_cmd(struct nfc_digital_dev *ddev,
+		struct sk_buff *skb, u16 timeout,
+		nfc_digital_cmd_complete_t cb, void *arg)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+
+	dev_dbg(trf->dev, "Unsupported interface\n");
+
+	return -EINVAL;
+}
+
+static int trf7970a_tg_listen(struct nfc_digital_dev *ddev,
+		u16 timeout, nfc_digital_cmd_complete_t cb, void *arg)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+
+	dev_dbg(trf->dev, "Unsupported interface\n");
+
+	return -EINVAL;
+}
+
+static int trf7970a_tg_listen_mdaa(struct nfc_digital_dev *ddev,
+		struct digital_tg_mdaa_params *mdaa_params,
+		u16 timeout, nfc_digital_cmd_complete_t cb, void *arg)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+
+	dev_dbg(trf->dev, "Unsupported interface\n");
+
+	return -EINVAL;
+}
+
+static void trf7970a_abort_cmd(struct nfc_digital_dev *ddev)
+{
+	struct trf7970a *trf = nfc_digital_get_drvdata(ddev);
+
+	dev_dbg(trf->dev, "Abort process initiated\n");
+
+	mutex_lock(&trf->lock);
+	trf->aborting = true;
+	mutex_unlock(&trf->lock);
+}
+
+static struct nfc_digital_ops trf7970a_nfc_ops = {
+	.in_configure_hw	= trf7970a_in_configure_hw,
+	.in_send_cmd		= trf7970a_in_send_cmd,
+	.tg_configure_hw	= trf7970a_tg_configure_hw,
+	.tg_send_cmd		= trf7970a_tg_send_cmd,
+	.tg_listen		= trf7970a_tg_listen,
+	.tg_listen_mdaa		= trf7970a_tg_listen_mdaa,
+	.switch_rf		= trf7970a_switch_rf,
+	.abort_cmd		= trf7970a_abort_cmd,
+};
+
+static int trf7970a_probe(struct spi_device *spi)
+{
+	struct device_node *np = spi->dev.of_node;
+	const struct spi_device_id *id = spi_get_device_id(spi);
+	struct trf7970a *trf;
+	int ret;
+
+	if (!np) {
+		dev_err(&spi->dev, "No Device Tree entry\n");
+		return -EINVAL;
+	}
+
+	trf = devm_kzalloc(&spi->dev, sizeof(*trf), GFP_KERNEL);
+	if (!trf)
+		return -ENOMEM;
+
+	trf->state = TRF7970A_ST_OFF;
+	trf->dev = &spi->dev;
+	trf->spi = spi;
+	trf->quirks = id->driver_data;
+
+	spi->mode = SPI_MODE_1;
+	spi->bits_per_word = 8;
+
+	/* There are two enable pins - both must be present */
+	trf->en_gpio = of_get_named_gpio(np, "ti,enable-gpios", 0);
+	if (!gpio_is_valid(trf->en_gpio)) {
+		dev_err(trf->dev, "No EN GPIO property\n");
+		return trf->en_gpio;
+	}
+
+	ret = devm_gpio_request_one(trf->dev, trf->en_gpio,
+			GPIOF_DIR_OUT | GPIOF_INIT_LOW, "EN");
+	if (ret) {
+		dev_err(trf->dev, "Can't request EN GPIO: %d\n", ret);
+		return ret;
+	}
+
+	trf->en2_gpio = of_get_named_gpio(np, "ti,enable-gpios", 1);
+	if (!gpio_is_valid(trf->en2_gpio)) {
+		dev_err(trf->dev, "No EN2 GPIO property\n");
+		return trf->en2_gpio;
+	}
+
+	ret = devm_gpio_request_one(trf->dev, trf->en2_gpio,
+			GPIOF_DIR_OUT | GPIOF_INIT_LOW, "EN2");
+	if (ret) {
+		dev_err(trf->dev, "Can't request EN2 GPIO: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(trf->dev, spi->irq, NULL,
+			trf7970a_irq, IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+			"trf7970a", trf);
+	if (ret) {
+		dev_err(trf->dev, "Can't request IRQ#%d: %d\n", spi->irq, ret);
+		return ret;
+	}
+
+	mutex_init(&trf->lock);
+	INIT_DELAYED_WORK(&trf->timeout_work, trf7970a_timeout_work_handler);
+
+	trf->regulator = devm_regulator_get(&spi->dev, "vin");
+	if (IS_ERR(trf->regulator)) {
+		ret = PTR_ERR(trf->regulator);
+		dev_err(trf->dev, "Can't get VIN regulator: %d\n", ret);
+		goto err_destroy_lock;
+	}
+
+	ret = regulator_enable(trf->regulator);
+	if (ret) {
+		dev_err(trf->dev, "Can't enable VIN: %d\n", ret);
+		goto err_destroy_lock;
+	}
+
+	trf->powering_up = true;
+
+	trf->ddev = nfc_digital_allocate_device(&trf7970a_nfc_ops,
+			TRF7970A_SUPPORTED_PROTOCOLS,
+			NFC_DIGITAL_DRV_CAPS_IN_CRC, TRF7970A_TX_SKB_HEADROOM,
+			0);
+	if (!trf->ddev) {
+		dev_err(trf->dev, "Can't allocate NFC digital device\n");
+		ret = -ENOMEM;
+		goto err_disable_regulator;
+	}
+
+	nfc_digital_set_parent_dev(trf->ddev, trf->dev);
+	nfc_digital_set_drvdata(trf->ddev, trf);
+	spi_set_drvdata(spi, trf);
+
+	ret = nfc_digital_register_device(trf->ddev);
+	if (ret) {
+		dev_err(trf->dev, "Can't register NFC digital device: %d\n",
+				ret);
+		goto err_free_ddev;
+	}
+
+	return 0;
+
+err_free_ddev:
+	nfc_digital_free_device(trf->ddev);
+err_disable_regulator:
+	regulator_disable(trf->regulator);
+err_destroy_lock:
+	mutex_destroy(&trf->lock);
+	return ret;
+}
+
+static int trf7970a_remove(struct spi_device *spi)
+{
+	struct trf7970a *trf = spi_get_drvdata(spi);
+
+	mutex_lock(&trf->lock);
+
+	trf7970a_switch_rf_off(trf);
+	trf7970a_init(trf);
+
+	switch (trf->state) {
+	case TRF7970A_ST_WAIT_FOR_TX_FIFO:
+	case TRF7970A_ST_WAIT_FOR_RX_DATA:
+	case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT:
+	case TRF7970A_ST_WAIT_TO_ISSUE_EOF:
+		trf7970a_send_err_upstream(trf, -ECANCELED);
+		break;
+	default:
+		break;
+	}
+
+	mutex_unlock(&trf->lock);
+
+	nfc_digital_unregister_device(trf->ddev);
+	nfc_digital_free_device(trf->ddev);
+
+	regulator_disable(trf->regulator);
+
+	mutex_destroy(&trf->lock);
+
+	return 0;
+}
+
+static const struct spi_device_id trf7970a_id_table[] = {
+	{ "trf7970a", TRF7970A_QUIRK_IRQ_STATUS_READ_ERRATA },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, trf7970a_id_table);
+
+static struct spi_driver trf7970a_spi_driver = {
+	.probe		= trf7970a_probe,
+	.remove		= trf7970a_remove,
+	.id_table	= trf7970a_id_table,
+	.driver		= {
+		.name	= "trf7970a",
+		.owner	= THIS_MODULE,
+	},
+};
+
+module_spi_driver(trf7970a_spi_driver);
+
+MODULE_AUTHOR("Mark A. Greer <mgreer@animalcreek.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TI trf7970a RFID/NFC Transceiver Driver");
diff --git a/include/net/nfc/digital.h b/include/net/nfc/digital.h
index 81af21e9bcd4..7655cfe27c34 100644
--- a/include/net/nfc/digital.h
+++ b/include/net/nfc/digital.h
@@ -35,6 +35,7 @@ enum {
 	NFC_DIGITAL_RF_TECH_106A = 0,
 	NFC_DIGITAL_RF_TECH_212F,
 	NFC_DIGITAL_RF_TECH_424F,
+	NFC_DIGITAL_RF_TECH_ISO15693,
 
 	NFC_DIGITAL_RF_TECH_LAST,
 };
@@ -50,6 +51,7 @@ enum {
 
 	NFC_DIGITAL_FRAMING_NFCA_T1T,
 	NFC_DIGITAL_FRAMING_NFCA_T2T,
+	NFC_DIGITAL_FRAMING_NFCA_T4T,
 	NFC_DIGITAL_FRAMING_NFCA_NFC_DEP,
 
 	NFC_DIGITAL_FRAMING_NFCF,
@@ -57,6 +59,9 @@ enum {
 	NFC_DIGITAL_FRAMING_NFCF_NFC_DEP,
 	NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED,
 
+	NFC_DIGITAL_FRAMING_ISO15693_INVENTORY,
+	NFC_DIGITAL_FRAMING_ISO15693_T5T,
+
 	NFC_DIGITAL_FRAMING_LAST,
 };
 
@@ -204,6 +209,8 @@ struct nfc_digital_dev {
 	u8 curr_rf_tech;
 	u8 curr_nfc_dep_pni;
 
+	u16 target_fsc;
+
 	int (*skb_check_crc)(struct sk_buff *skb);
 	void (*skb_add_crc)(struct sk_buff *skb);
 };
diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h
index e80894bca1d0..2e8b40c16274 100644
--- a/include/net/nfc/nfc.h
+++ b/include/net/nfc/nfc.h
@@ -111,6 +111,9 @@ struct nfc_target {
 	u8 sensf_res[NFC_SENSF_RES_MAXSIZE];
 	u8 hci_reader_gate;
 	u8 logical_idx;
+	u8 is_iso15693;
+	u8 iso15693_dsfid;
+	u8 iso15693_uid[NFC_ISO15693_UID_MAXSIZE];
 };
 
 /**
diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h
index 6ad6cc03ccd3..9789dc95b6a8 100644
--- a/include/uapi/linux/nfc.h
+++ b/include/uapi/linux/nfc.h
@@ -150,6 +150,8 @@ enum nfc_commands {
  * @NFC_ATTR_SE_TYPE: Secure element type (UICC or EMBEDDED)
  * @NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS: Firmware download operation status
  * @NFC_ATTR_APDU: Secure element APDU
+ * @NFC_ATTR_TARGET_ISO15693_DSFID: ISO 15693 Data Storage Format Identifier
+ * @NFC_ATTR_TARGET_ISO15693_UID: ISO 15693 Unique Identifier
  */
 enum nfc_attrs {
 	NFC_ATTR_UNSPEC,
@@ -178,6 +180,8 @@ enum nfc_attrs {
 	NFC_ATTR_SE_AID,
 	NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS,
 	NFC_ATTR_SE_APDU,
+	NFC_ATTR_TARGET_ISO15693_DSFID,
+	NFC_ATTR_TARGET_ISO15693_UID,
 /* private: internal use only */
 	__NFC_ATTR_AFTER_LAST
 };
@@ -200,6 +204,7 @@ enum nfc_sdp_attr {
 #define NFC_SENSF_RES_MAXSIZE 18
 #define NFC_GB_MAXSIZE        48
 #define NFC_FIRMWARE_NAME_MAXSIZE 32
+#define NFC_ISO15693_UID_MAXSIZE 8
 
 /* NFC protocols */
 #define NFC_PROTO_JEWEL		1
@@ -208,8 +213,9 @@ enum nfc_sdp_attr {
 #define NFC_PROTO_ISO14443	4
 #define NFC_PROTO_NFC_DEP	5
 #define NFC_PROTO_ISO14443_B	6
+#define NFC_PROTO_ISO15693	7
 
-#define NFC_PROTO_MAX		7
+#define NFC_PROTO_MAX		8
 
 /* NFC communication modes */
 #define NFC_COMM_ACTIVE  0
@@ -227,6 +233,7 @@ enum nfc_sdp_attr {
 #define NFC_PROTO_ISO14443_MASK	  (1 << NFC_PROTO_ISO14443)
 #define NFC_PROTO_NFC_DEP_MASK	  (1 << NFC_PROTO_NFC_DEP)
 #define NFC_PROTO_ISO14443_B_MASK (1 << NFC_PROTO_ISO14443_B)
+#define NFC_PROTO_ISO15693_MASK	  (1 << NFC_PROTO_ISO15693)
 
 /* NFC Secure Elements */
 #define NFC_SE_UICC     0x1
diff --git a/net/nfc/core.c b/net/nfc/core.c
index ca1e65f4b133..819b87702b70 100644
--- a/net/nfc/core.c
+++ b/net/nfc/core.c
@@ -280,9 +280,6 @@ static struct nfc_target *nfc_find_target(struct nfc_dev *dev, u32 target_idx)
 {
 	int i;
 
-	if (dev->n_targets == 0)
-		return NULL;
-
 	for (i = 0; i < dev->n_targets; i++) {
 		if (dev->targets[i].idx == target_idx)
 			return &dev->targets[i];
@@ -546,9 +543,9 @@ error:
 
 struct nfc_se *nfc_find_se(struct nfc_dev *dev, u32 se_idx)
 {
-	struct nfc_se *se, *n;
+	struct nfc_se *se;
 
-	list_for_each_entry_safe(se, n, &dev->secure_elements, list)
+	list_for_each_entry(se, &dev->secure_elements, list)
 		if (se->idx == se_idx)
 			return se;
 
@@ -655,9 +652,6 @@ int nfc_set_remote_general_bytes(struct nfc_dev *dev, u8 *gb, u8 gb_len)
 {
 	pr_debug("dev_name=%s gb_len=%d\n", dev_name(&dev->dev), gb_len);
 
-	if (gb_len > NFC_MAX_GT_LEN)
-		return -EINVAL;
-
 	return nfc_llcp_set_remote_gb(dev, gb, gb_len);
 }
 EXPORT_SYMBOL(nfc_set_remote_general_bytes);
diff --git a/net/nfc/digital.h b/net/nfc/digital.h
index 08b29b55ea63..3759add68b1b 100644
--- a/net/nfc/digital.h
+++ b/net/nfc/digital.h
@@ -72,6 +72,12 @@ void digital_poll_next_tech(struct nfc_digital_dev *ddev);
 
 int digital_in_send_sens_req(struct nfc_digital_dev *ddev, u8 rf_tech);
 int digital_in_send_sensf_req(struct nfc_digital_dev *ddev, u8 rf_tech);
+int digital_in_send_iso15693_inv_req(struct nfc_digital_dev *ddev, u8 rf_tech);
+
+int digital_in_iso_dep_pull_sod(struct nfc_digital_dev *ddev,
+				struct sk_buff *skb);
+int digital_in_iso_dep_push_sod(struct nfc_digital_dev *ddev,
+				struct sk_buff *skb);
 
 int digital_target_found(struct nfc_digital_dev *ddev,
 			 struct nfc_target *target, u8 protocol);
diff --git a/net/nfc/digital_core.c b/net/nfc/digital_core.c
index c129d1571ca6..e01e15dbf1ab 100644
--- a/net/nfc/digital_core.c
+++ b/net/nfc/digital_core.c
@@ -25,6 +25,8 @@
 #define DIGITAL_PROTO_NFCF_RF_TECH \
 	(NFC_PROTO_FELICA_MASK | NFC_PROTO_NFC_DEP_MASK)
 
+#define DIGITAL_PROTO_ISO15693_RF_TECH	NFC_PROTO_ISO15693_MASK
+
 struct digital_cmd {
 	struct list_head queue;
 
@@ -331,6 +333,18 @@ int digital_target_found(struct nfc_digital_dev *ddev,
 		}
 		break;
 
+	case NFC_PROTO_ISO15693:
+		framing = NFC_DIGITAL_FRAMING_ISO15693_T5T;
+		check_crc = digital_skb_check_crc_b;
+		add_crc = digital_skb_add_crc_b;
+		break;
+
+	case NFC_PROTO_ISO14443:
+		framing = NFC_DIGITAL_FRAMING_NFCA_T4T;
+		check_crc = digital_skb_check_crc_a;
+		add_crc = digital_skb_add_crc_a;
+		break;
+
 	default:
 		pr_err("Invalid protocol %d\n", protocol);
 		return -EINVAL;
@@ -461,7 +475,7 @@ static int digital_start_poll(struct nfc_dev *nfc_dev, __u32 im_protocols,
 		digital_add_poll_tech(ddev, NFC_DIGITAL_RF_TECH_106A,
 				      digital_in_send_sens_req);
 
-	if (im_protocols & DIGITAL_PROTO_NFCF_RF_TECH) {
+	if (matching_im_protocols & DIGITAL_PROTO_NFCF_RF_TECH) {
 		digital_add_poll_tech(ddev, NFC_DIGITAL_RF_TECH_212F,
 				      digital_in_send_sensf_req);
 
@@ -469,7 +483,11 @@ static int digital_start_poll(struct nfc_dev *nfc_dev, __u32 im_protocols,
 				      digital_in_send_sensf_req);
 	}
 
-	if (tm_protocols & NFC_PROTO_NFC_DEP_MASK) {
+	if (matching_im_protocols & DIGITAL_PROTO_ISO15693_RF_TECH)
+		digital_add_poll_tech(ddev, NFC_DIGITAL_RF_TECH_ISO15693,
+				      digital_in_send_iso15693_inv_req);
+
+	if (matching_tm_protocols & NFC_PROTO_NFC_DEP_MASK) {
 		if (ddev->ops->tg_listen_mdaa) {
 			digital_add_poll_tech(ddev, 0,
 					      digital_tg_listen_mdaa);
@@ -607,20 +625,30 @@ static void digital_in_send_complete(struct nfc_digital_dev *ddev, void *arg,
 
 	if (IS_ERR(resp)) {
 		rc = PTR_ERR(resp);
+		resp = NULL;
 		goto done;
 	}
 
-	if (ddev->curr_protocol == NFC_PROTO_MIFARE)
+	if (ddev->curr_protocol == NFC_PROTO_MIFARE) {
 		rc = digital_in_recv_mifare_res(resp);
-	else
-		rc = ddev->skb_check_crc(resp);
+		/* crc check is done in digital_in_recv_mifare_res() */
+		goto done;
+	}
 
+	if (ddev->curr_protocol == NFC_PROTO_ISO14443) {
+		rc = digital_in_iso_dep_pull_sod(ddev, resp);
+		if (rc)
+			goto done;
+	}
+
+	rc = ddev->skb_check_crc(resp);
+
+done:
 	if (rc) {
 		kfree_skb(resp);
 		resp = NULL;
 	}
 
-done:
 	data_exch->cb(data_exch->cb_context, resp, rc);
 
 	kfree(data_exch);
@@ -632,6 +660,7 @@ static int digital_in_send(struct nfc_dev *nfc_dev, struct nfc_target *target,
 {
 	struct nfc_digital_dev *ddev = nfc_get_drvdata(nfc_dev);
 	struct digital_data_exch *data_exch;
+	int rc;
 
 	data_exch = kzalloc(sizeof(struct digital_data_exch), GFP_KERNEL);
 	if (!data_exch) {
@@ -642,13 +671,27 @@ static int digital_in_send(struct nfc_dev *nfc_dev, struct nfc_target *target,
 	data_exch->cb = cb;
 	data_exch->cb_context = cb_context;
 
-	if (ddev->curr_protocol == NFC_PROTO_NFC_DEP)
-		return digital_in_send_dep_req(ddev, target, skb, data_exch);
+	if (ddev->curr_protocol == NFC_PROTO_NFC_DEP) {
+		rc = digital_in_send_dep_req(ddev, target, skb, data_exch);
+		goto exit;
+	}
+
+	if (ddev->curr_protocol == NFC_PROTO_ISO14443) {
+		rc = digital_in_iso_dep_push_sod(ddev, skb);
+		if (rc)
+			goto exit;
+	}
 
 	ddev->skb_add_crc(skb);
 
-	return digital_in_send_cmd(ddev, skb, 500, digital_in_send_complete,
-				   data_exch);
+	rc = digital_in_send_cmd(ddev, skb, 500, digital_in_send_complete,
+				 data_exch);
+
+exit:
+	if (rc)
+		kfree(data_exch);
+
+	return rc;
 }
 
 static struct nfc_ops digital_nfc_ops = {
@@ -700,6 +743,10 @@ struct nfc_digital_dev *nfc_digital_allocate_device(struct nfc_digital_ops *ops,
 		ddev->protocols |= NFC_PROTO_FELICA_MASK;
 	if (supported_protocols & NFC_PROTO_NFC_DEP_MASK)
 		ddev->protocols |= NFC_PROTO_NFC_DEP_MASK;
+	if (supported_protocols & NFC_PROTO_ISO15693_MASK)
+		ddev->protocols |= NFC_PROTO_ISO15693_MASK;
+	if (supported_protocols & NFC_PROTO_ISO14443_MASK)
+		ddev->protocols |= NFC_PROTO_ISO14443_MASK;
 
 	ddev->tx_headroom = tx_headroom + DIGITAL_MAX_HEADER_LEN;
 	ddev->tx_tailroom = tx_tailroom + DIGITAL_CRC_LEN;
diff --git a/net/nfc/digital_technology.c b/net/nfc/digital_technology.c
index 251c8c753ebe..278c3fed27e0 100644
--- a/net/nfc/digital_technology.c
+++ b/net/nfc/digital_technology.c
@@ -30,6 +30,7 @@
 
 #define DIGITAL_SEL_RES_NFCID1_COMPLETE(sel_res) (!((sel_res) & 0x04))
 #define DIGITAL_SEL_RES_IS_T2T(sel_res) (!((sel_res) & 0x60))
+#define DIGITAL_SEL_RES_IS_T4T(sel_res) ((sel_res) & 0x20)
 #define DIGITAL_SEL_RES_IS_NFC_DEP(sel_res) ((sel_res) & 0x40)
 
 #define DIGITAL_SENS_RES_IS_T1T(sens_res) (((sens_res) & 0x0C00) == 0x0C00)
@@ -51,6 +52,34 @@
 #define DIGITAL_SENSF_REQ_RC_SC   1
 #define DIGITAL_SENSF_REQ_RC_AP   2
 
+#define DIGITAL_CMD_ISO15693_INVENTORY_REQ	0x01
+
+#define DIGITAL_ISO15693_REQ_FLAG_DATA_RATE	BIT(1)
+#define DIGITAL_ISO15693_REQ_FLAG_INVENTORY	BIT(2)
+#define DIGITAL_ISO15693_REQ_FLAG_NB_SLOTS	BIT(5)
+#define DIGITAL_ISO15693_RES_FLAG_ERROR		BIT(0)
+#define DIGITAL_ISO15693_RES_IS_VALID(flags) \
+	(!((flags) & DIGITAL_ISO15693_RES_FLAG_ERROR))
+
+#define DIGITAL_ISO_DEP_I_PCB	 0x02
+#define DIGITAL_ISO_DEP_PNI(pni) ((pni) & 0x01)
+
+#define DIGITAL_ISO_DEP_PCB_TYPE(pcb) ((pcb) & 0xC0)
+
+#define DIGITAL_ISO_DEP_I_BLOCK 0x00
+
+#define DIGITAL_ISO_DEP_BLOCK_HAS_DID(pcb) ((pcb) & 0x08)
+
+static const u8 digital_ats_fsc[] = {
+	 16,  24,  32,  40,  48,  64,  96, 128,
+};
+
+#define DIGITAL_ATS_FSCI(t0) ((t0) & 0x0F)
+#define DIGITAL_ATS_MAX_FSC  256
+
+#define DIGITAL_RATS_BYTE1 0xE0
+#define DIGITAL_RATS_PARAM 0x80
+
 struct digital_sdd_res {
 	u8 nfcid1[4];
 	u8 bcc;
@@ -82,9 +111,127 @@ struct digital_sensf_res {
 	u8 rd[2];
 } __packed;
 
+struct digital_iso15693_inv_req {
+	u8 flags;
+	u8 cmd;
+	u8 mask_len;
+	u64 mask;
+} __packed;
+
+struct digital_iso15693_inv_res {
+	u8 flags;
+	u8 dsfid;
+	u64 uid;
+} __packed;
+
 static int digital_in_send_sdd_req(struct nfc_digital_dev *ddev,
 				   struct nfc_target *target);
 
+int digital_in_iso_dep_pull_sod(struct nfc_digital_dev *ddev,
+				struct sk_buff *skb)
+{
+	u8 pcb;
+	u8 block_type;
+
+	if (skb->len < 1)
+		return -EIO;
+
+	pcb = *skb->data;
+	block_type = DIGITAL_ISO_DEP_PCB_TYPE(pcb);
+
+	/* No support fo R-block nor S-block */
+	if (block_type != DIGITAL_ISO_DEP_I_BLOCK) {
+		pr_err("ISO_DEP R-block and S-block not supported\n");
+		return -EIO;
+	}
+
+	if (DIGITAL_ISO_DEP_BLOCK_HAS_DID(pcb)) {
+		pr_err("DID field in ISO_DEP PCB not supported\n");
+		return -EIO;
+	}
+
+	skb_pull(skb, 1);
+
+	return 0;
+}
+
+int digital_in_iso_dep_push_sod(struct nfc_digital_dev *ddev,
+				struct sk_buff *skb)
+{
+	/*
+	 * Chaining not supported so skb->len + 1 PCB byte + 2 CRC bytes must
+	 * not be greater than remote FSC
+	 */
+	if (skb->len + 3 > ddev->target_fsc)
+		return -EIO;
+
+	skb_push(skb, 1);
+
+	*skb->data = DIGITAL_ISO_DEP_I_PCB | ddev->curr_nfc_dep_pni;
+
+	ddev->curr_nfc_dep_pni =
+		DIGITAL_ISO_DEP_PNI(ddev->curr_nfc_dep_pni + 1);
+
+	return 0;
+}
+
+static void digital_in_recv_ats(struct nfc_digital_dev *ddev, void *arg,
+				struct sk_buff *resp)
+{
+	struct nfc_target *target = arg;
+	u8 fsdi;
+	int rc;
+
+	if (IS_ERR(resp)) {
+		rc = PTR_ERR(resp);
+		resp = NULL;
+		goto exit;
+	}
+
+	if (resp->len < 2) {
+		rc = -EIO;
+		goto exit;
+	}
+
+	fsdi = DIGITAL_ATS_FSCI(resp->data[1]);
+	if (fsdi >= 8)
+		ddev->target_fsc = DIGITAL_ATS_MAX_FSC;
+	else
+		ddev->target_fsc = digital_ats_fsc[fsdi];
+
+	ddev->curr_nfc_dep_pni = 0;
+
+	rc = digital_target_found(ddev, target, NFC_PROTO_ISO14443);
+
+exit:
+	dev_kfree_skb(resp);
+	kfree(target);
+
+	if (rc)
+		digital_poll_next_tech(ddev);
+}
+
+static int digital_in_send_rats(struct nfc_digital_dev *ddev,
+				struct nfc_target *target)
+{
+	int rc;
+	struct sk_buff *skb;
+
+	skb = digital_skb_alloc(ddev, 2);
+	if (!skb)
+		return -ENOMEM;
+
+	*skb_put(skb, 1) = DIGITAL_RATS_BYTE1;
+	*skb_put(skb, 1) = DIGITAL_RATS_PARAM;
+
+	rc = digital_in_send_cmd(ddev, skb, 30, digital_in_recv_ats,
+				 target);
+	if (rc)
+		kfree_skb(skb);
+
+	return rc;
+}
+
 static void digital_in_recv_sel_res(struct nfc_digital_dev *ddev, void *arg,
 				    struct sk_buff *resp)
 {
@@ -122,8 +269,19 @@ static void digital_in_recv_sel_res(struct nfc_digital_dev *ddev, void *arg,
 		goto exit_free_skb;
 	}
 
+	target->sel_res = sel_res;
+
 	if (DIGITAL_SEL_RES_IS_T2T(sel_res)) {
 		nfc_proto = NFC_PROTO_MIFARE;
+	} else if (DIGITAL_SEL_RES_IS_T4T(sel_res)) {
+		rc = digital_in_send_rats(ddev, target);
+		if (rc)
+			goto exit;
+		/*
+		 * Skip target_found and don't free it for now. This will be
+		 * done when receiving the ATS
+		 */
+		goto exit_free_skb;
 	} else if (DIGITAL_SEL_RES_IS_NFC_DEP(sel_res)) {
 		nfc_proto = NFC_PROTO_NFC_DEP;
 	} else {
@@ -131,8 +289,6 @@ static void digital_in_recv_sel_res(struct nfc_digital_dev *ddev, void *arg,
 		goto exit;
 	}
 
-	target->sel_res = sel_res;
-
 	rc = digital_target_found(ddev, target, nfc_proto);
 
 exit:
@@ -473,6 +629,93 @@ int digital_in_send_sensf_req(struct nfc_digital_dev *ddev, u8 rf_tech)
 	return rc;
 }
 
+static void digital_in_recv_iso15693_inv_res(struct nfc_digital_dev *ddev,
+		void *arg, struct sk_buff *resp)
+{
+	struct digital_iso15693_inv_res *res;
+	struct nfc_target *target = NULL;
+	int rc;
+
+	if (IS_ERR(resp)) {
+		rc = PTR_ERR(resp);
+		resp = NULL;
+		goto out_free_skb;
+	}
+
+	if (resp->len != sizeof(*res)) {
+		rc = -EIO;
+		goto out_free_skb;
+	}
+
+	res = (struct digital_iso15693_inv_res *)resp->data;
+
+	if (!DIGITAL_ISO15693_RES_IS_VALID(res->flags)) {
+		PROTOCOL_ERR("ISO15693 - 10.3.1");
+		rc = -EINVAL;
+		goto out_free_skb;
+	}
+
+	target = kzalloc(sizeof(*target), GFP_KERNEL);
+	if (!target) {
+		rc = -ENOMEM;
+		goto out_free_skb;
+	}
+
+	target->is_iso15693 = 1;
+	target->iso15693_dsfid = res->dsfid;
+	memcpy(target->iso15693_uid, &res->uid, sizeof(target->iso15693_uid));
+
+	rc = digital_target_found(ddev, target, NFC_PROTO_ISO15693);
+
+	kfree(target);
+
+out_free_skb:
+	dev_kfree_skb(resp);
+
+	if (rc)
+		digital_poll_next_tech(ddev);
+}
+
+int digital_in_send_iso15693_inv_req(struct nfc_digital_dev *ddev, u8 rf_tech)
+{
+	struct digital_iso15693_inv_req *req;
+	struct sk_buff *skb;
+	int rc;
+
+	rc = digital_in_configure_hw(ddev, NFC_DIGITAL_CONFIG_RF_TECH,
+				     NFC_DIGITAL_RF_TECH_ISO15693);
+	if (rc)
+		return rc;
+
+	rc = digital_in_configure_hw(ddev, NFC_DIGITAL_CONFIG_FRAMING,
+				     NFC_DIGITAL_FRAMING_ISO15693_INVENTORY);
+	if (rc)
+		return rc;
+
+	skb = digital_skb_alloc(ddev, sizeof(*req));
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put(skb, sizeof(*req) - sizeof(req->mask)); /* No mask */
+	req = (struct digital_iso15693_inv_req *)skb->data;
+
+	/* Single sub-carrier, high data rate, no AFI, single slot
+	 * Inventory command
+	 */
+	req->flags = DIGITAL_ISO15693_REQ_FLAG_DATA_RATE |
+		     DIGITAL_ISO15693_REQ_FLAG_INVENTORY |
+		     DIGITAL_ISO15693_REQ_FLAG_NB_SLOTS;
+	req->cmd = DIGITAL_CMD_ISO15693_INVENTORY_REQ;
+	req->mask_len = 0;
+
+	rc = digital_in_send_cmd(ddev, skb, 30,
+				 digital_in_recv_iso15693_inv_res, NULL);
+	if (rc)
+		kfree_skb(skb);
+
+	return rc;
+}
+
 static int digital_tg_send_sel_res(struct nfc_digital_dev *ddev)
 {
 	struct sk_buff *skb;
diff --git a/net/nfc/hci/llc.c b/net/nfc/hci/llc.c
index a07d2b818487..1b90c0531852 100644
--- a/net/nfc/hci/llc.c
+++ b/net/nfc/hci/llc.c
@@ -20,14 +20,12 @@
 
 #include "llc.h"
 
-static struct list_head llc_engines;
+static LIST_HEAD(llc_engines);
 
 int nfc_llc_init(void)
 {
 	int r;
 
-	INIT_LIST_HEAD(&llc_engines);
-
 	r = nfc_llc_nop_register();
 	if (r)
 		goto exit;
diff --git a/net/nfc/llcp_core.c b/net/nfc/llcp_core.c
index 6184bd1fba3a..b486f12ae243 100644
--- a/net/nfc/llcp_core.c
+++ b/net/nfc/llcp_core.c
@@ -27,7 +27,7 @@
 
 static u8 llcp_magic[3] = {0x46, 0x66, 0x6d};
 
-static struct list_head llcp_devices;
+static LIST_HEAD(llcp_devices);
 
 static void nfc_llcp_rx_skb(struct nfc_llcp_local *local, struct sk_buff *skb);
 
@@ -293,9 +293,9 @@ static void nfc_llcp_sdreq_timer(unsigned long data)
 
 struct nfc_llcp_local *nfc_llcp_find_local(struct nfc_dev *dev)
 {
-	struct nfc_llcp_local *local, *n;
+	struct nfc_llcp_local *local;
 
-	list_for_each_entry_safe(local, n, &llcp_devices, list)
+	list_for_each_entry(local, &llcp_devices, list)
 		if (local->dev == dev)
 			return local;
 
@@ -609,14 +609,16 @@ u8 *nfc_llcp_general_bytes(struct nfc_dev *dev, size_t *general_bytes_len)
 
 int nfc_llcp_set_remote_gb(struct nfc_dev *dev, u8 *gb, u8 gb_len)
 {
-	struct nfc_llcp_local *local = nfc_llcp_find_local(dev);
+	struct nfc_llcp_local *local;
+
+	if (gb_len < 3 || gb_len > NFC_MAX_GT_LEN)
+		return -EINVAL;
 
+	local = nfc_llcp_find_local(dev);
 	if (local == NULL) {
 		pr_err("No LLCP device\n");
 		return -ENODEV;
 	}
-	if (gb_len < 3)
-		return -EINVAL;
 
 	memset(local->remote_gb, 0, NFC_MAX_GT_LEN);
 	memcpy(local->remote_gb, gb, gb_len);
@@ -1622,8 +1624,6 @@ void nfc_llcp_unregister_device(struct nfc_dev *dev)
 
 int __init nfc_llcp_init(void)
 {
-	INIT_LIST_HEAD(&llcp_devices);
-
 	return nfc_llcp_sock_init();
 }
 
diff --git a/net/nfc/nci/core.c b/net/nfc/nci/core.c
index 56db888b1cd5..6c34ac978501 100644
--- a/net/nfc/nci/core.c
+++ b/net/nfc/nci/core.c
@@ -74,7 +74,7 @@ static int __nci_request(struct nci_dev *ndev,
 
 	ndev->req_status = NCI_REQ_PEND;
 
-	init_completion(&ndev->req_completion);
+	reinit_completion(&ndev->req_completion);
 	req(ndev, opt);
 	completion_rc =
 		wait_for_completion_interruptible_timeout(&ndev->req_completion,
@@ -709,6 +709,7 @@ struct nci_dev *nci_allocate_device(struct nci_ops *ops,
 	ndev->ops = ops;
 	ndev->tx_headroom = tx_headroom;
 	ndev->tx_tailroom = tx_tailroom;
+	init_completion(&ndev->req_completion);
 
 	ndev->nfc_dev = nfc_allocate_device(&nci_nfc_ops,
 					    supported_protocols,
diff --git a/net/nfc/nci/spi.c b/net/nfc/nci/spi.c
index f1d426f10cce..ec250e77763a 100644
--- a/net/nfc/nci/spi.c
+++ b/net/nfc/nci/spi.c
@@ -105,7 +105,7 @@ int nci_spi_send(struct nci_spi *nspi,
 	if (ret != 0 || nspi->acknowledge_mode == NCI_SPI_CRC_DISABLED)
 		goto done;
 
-	init_completion(&nspi->req_completion);
+	reinit_completion(&nspi->req_completion);
 	completion_rc =	wait_for_completion_interruptible_timeout(
 							&nspi->req_completion,
 							NCI_SPI_SEND_TIMEOUT);
@@ -145,6 +145,7 @@ struct nci_spi *nci_spi_allocate_spi(struct spi_device *spi,
 
 	nspi->spi = spi;
 	nspi->ndev = ndev;
+	init_completion(&nspi->req_completion);
 
 	return nspi;
 }
diff --git a/net/nfc/netlink.c b/net/nfc/netlink.c
index ebbf6fb88b35..43cb1c17e267 100644
--- a/net/nfc/netlink.c
+++ b/net/nfc/netlink.c
@@ -94,6 +94,14 @@ static int nfc_genl_send_target(struct sk_buff *msg, struct nfc_target *target,
 		    target->sensf_res))
 		goto nla_put_failure;
 
+	if (target->is_iso15693) {
+		if (nla_put_u8(msg, NFC_ATTR_TARGET_ISO15693_DSFID,
+			       target->iso15693_dsfid) ||
+		    nla_put(msg, NFC_ATTR_TARGET_ISO15693_UID,
+			    sizeof(target->iso15693_uid), target->iso15693_uid))
+			goto nla_put_failure;
+	}
+
 	return genlmsg_end(msg, hdr);
 
 nla_put_failure: