ipr: add support for async scanning to speed up boot

Switch device scanning logic in the ipr driver to use
the async scan API. This speeds up boot times, particularly
on large systems.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Reviewed-by: Wen Xiong<wenxiong@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

2 files changed, 44 insertions, 48 deletions

diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index c91c7c5da569..beee3843e420 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -1426,16 +1426,14 @@ static void ipr_handle_config_change(struct ipr_ioa_cfg *ioa_cfg,
 		if (res->sdev) {
 			res->del_from_ml = 1;
 			res->res_handle = IPR_INVALID_RES_HANDLE;
-			if (ioa_cfg->allow_ml_add_del)
-				schedule_work(&ioa_cfg->work_q);
+			schedule_work(&ioa_cfg->work_q);
 		} else {
 			ipr_clear_res_target(res);
 			list_move_tail(&res->queue, &ioa_cfg->free_res_q);
 		}
 	} else if (!res->sdev || res->del_from_ml) {
 		res->add_to_ml = 1;
-		if (ioa_cfg->allow_ml_add_del)
-			schedule_work(&ioa_cfg->work_q);
+		schedule_work(&ioa_cfg->work_q);
 	}
 
 	ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, hostrcb);
@@ -3273,8 +3271,7 @@ static void ipr_worker_thread(struct work_struct *work)
 restart:
 	do {
 		did_work = 0;
-		if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].allow_cmds ||
-		    !ioa_cfg->allow_ml_add_del) {
+		if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].allow_cmds) {
 			spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
 			return;
 		}
@@ -3311,6 +3308,7 @@ restart:
 		}
 	}
 
+	ioa_cfg->scan_done = 1;
 	spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
 	kobject_uevent(&ioa_cfg->host->shost_dev.kobj, KOBJ_CHANGE);
 	LEAVE;
@@ -5207,6 +5205,28 @@ static int ipr_cancel_op(struct scsi_cmnd *scsi_cmd)
  * @scsi_cmd:	scsi command struct
  *
  * Return value:
+ *	0 if scan in progress / 1 if scan is complete
+ **/
+static int ipr_scan_finished(struct Scsi_Host *shost, unsigned long elapsed_time)
+{
+	unsigned long lock_flags;
+	struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) shost->hostdata;
+	int rc = 0;
+
+	spin_lock_irqsave(shost->host_lock, lock_flags);
+	if (ioa_cfg->hrrq[IPR_INIT_HRRQ].ioa_is_dead || ioa_cfg->scan_done)
+		rc = 1;
+	if ((elapsed_time/HZ) > (ioa_cfg->transop_timeout * 2))
+		rc = 1;
+	spin_unlock_irqrestore(shost->host_lock, lock_flags);
+	return rc;
+}
+
+/**
+ * ipr_eh_host_reset - Reset the host adapter
+ * @scsi_cmd:	scsi command struct
+ *
+ * Return value:
  * 	SUCCESS / FAILED
  **/
 static int ipr_eh_abort(struct scsi_cmnd *scsi_cmd)
@@ -6275,6 +6295,7 @@ static struct scsi_host_template driver_template = {
 	.slave_alloc = ipr_slave_alloc,
 	.slave_configure = ipr_slave_configure,
 	.slave_destroy = ipr_slave_destroy,
+	.scan_finished = ipr_scan_finished,
 	.target_alloc = ipr_target_alloc,
 	.target_destroy = ipr_target_destroy,
 	.change_queue_depth = ipr_change_queue_depth,
@@ -6816,7 +6837,7 @@ static int ipr_ioa_reset_done(struct ipr_cmnd *ipr_cmd)
 	ioa_cfg->doorbell |= IPR_RUNTIME_RESET;
 
 	list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
-		if (ioa_cfg->allow_ml_add_del && (res->add_to_ml || res->del_from_ml)) {
+		if (res->add_to_ml || res->del_from_ml) {
 			ipr_trace;
 			break;
 		}
@@ -6845,6 +6866,7 @@ static int ipr_ioa_reset_done(struct ipr_cmnd *ipr_cmd)
 	if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].allow_cmds)
 		scsi_block_requests(ioa_cfg->host);
 
+	schedule_work(&ioa_cfg->work_q);
 	LEAVE;
 	return IPR_RC_JOB_RETURN;
 }
@@ -7585,6 +7607,19 @@ static int ipr_ioafp_page0_inquiry(struct ipr_cmnd *ipr_cmd)
 	type[4] = '\0';
 	ioa_cfg->type = simple_strtoul((char *)type, NULL, 16);
 
+	if (ipr_invalid_adapter(ioa_cfg)) {
+		dev_err(&ioa_cfg->pdev->dev,
+			"Adapter not supported in this hardware configuration.\n");
+
+		if (!ipr_testmode) {
+			ioa_cfg->reset_retries += IPR_NUM_RESET_RELOAD_RETRIES;
+			ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
+			list_add_tail(&ipr_cmd->queue,
+					&ioa_cfg->hrrq->hrrq_free_q);
+			return IPR_RC_JOB_RETURN;
+		}
+	}
+
 	ipr_cmd->job_step = ipr_ioafp_page3_inquiry;
 
 	ipr_ioafp_inquiry(ipr_cmd, 1, 0,
@@ -8772,20 +8807,6 @@ static int ipr_probe_ioa_part2(struct ipr_ioa_cfg *ioa_cfg)
 		_ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_enable_ioa,
 					IPR_SHUTDOWN_NONE);
 	spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
-	wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
-	spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
-
-	if (ioa_cfg->hrrq[IPR_INIT_HRRQ].ioa_is_dead) {
-		rc = -EIO;
-	} else if (ipr_invalid_adapter(ioa_cfg)) {
-		if (!ipr_testmode)
-			rc = -EIO;
-
-		dev_err(&ioa_cfg->pdev->dev,
-			"Adapter not supported in this hardware configuration.\n");
-	}
-
-	spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
 
 	LEAVE;
 	return rc;
@@ -9239,7 +9260,7 @@ static void ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg,
 					       * ioa_cfg->max_devs_supported)));
 	}
 
-	host->max_channel = IPR_MAX_BUS_TO_SCAN;
+	host->max_channel = IPR_VSET_BUS;
 	host->unique_id = host->host_no;
 	host->max_cmd_len = IPR_MAX_CDB_LEN;
 	host->can_queue = ioa_cfg->max_cmds;
@@ -9739,25 +9760,6 @@ out_scsi_host_put:
 }
 
 /**
- * ipr_scan_vsets - Scans for VSET devices
- * @ioa_cfg:	ioa config struct
- *
- * Description: Since the VSET resources do not follow SAM in that we can have
- * sparse LUNs with no LUN 0, we have to scan for these ourselves.
- *
- * Return value:
- * 	none
- **/
-static void ipr_scan_vsets(struct ipr_ioa_cfg *ioa_cfg)
-{
-	int target, lun;
-
-	for (target = 0; target < IPR_MAX_NUM_TARGETS_PER_BUS; target++)
-		for (lun = 0; lun < IPR_MAX_NUM_VSET_LUNS_PER_TARGET; lun++)
-			scsi_add_device(ioa_cfg->host, IPR_VSET_BUS, target, lun);
-}
-
-/**
  * ipr_initiate_ioa_bringdown - Bring down an adapter
  * @ioa_cfg:		ioa config struct
  * @shutdown_type:	shutdown type
@@ -9912,10 +9914,6 @@ static int ipr_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
 	}
 
 	scsi_scan_host(ioa_cfg->host);
-	ipr_scan_vsets(ioa_cfg);
-	scsi_add_device(ioa_cfg->host, IPR_IOA_BUS, IPR_IOA_TARGET, IPR_IOA_LUN);
-	ioa_cfg->allow_ml_add_del = 1;
-	ioa_cfg->host->max_channel = IPR_VSET_BUS;
 	ioa_cfg->iopoll_weight = ioa_cfg->chip_cfg->iopoll_weight;
 
 	if (ioa_cfg->iopoll_weight && ioa_cfg->sis64 && ioa_cfg->nvectors > 1) {
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index 9ebdebd944e7..b4f3eec51bc9 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -157,13 +157,11 @@
 
 #define IPR_MAX_NUM_TARGETS_PER_BUS			256
 #define IPR_MAX_NUM_LUNS_PER_TARGET			256
-#define IPR_MAX_NUM_VSET_LUNS_PER_TARGET	8
 #define IPR_VSET_BUS					0xff
 #define IPR_IOA_BUS						0xff
 #define IPR_IOA_TARGET					0xff
 #define IPR_IOA_LUN						0xff
 #define IPR_MAX_NUM_BUSES				16
-#define IPR_MAX_BUS_TO_SCAN				IPR_MAX_NUM_BUSES
 
 #define IPR_NUM_RESET_RELOAD_RETRIES		3
 
@@ -1453,7 +1451,7 @@ struct ipr_ioa_cfg {
 	u8 in_ioa_bringdown:1;
 	u8 ioa_unit_checked:1;
 	u8 dump_taken:1;
-	u8 allow_ml_add_del:1;
+	u8 scan_done:1;
 	u8 needs_hard_reset:1;
 	u8 dual_raid:1;
 	u8 needs_warm_reset:1;