Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into fixes

58 files changed, 728 insertions, 775 deletions

diff --git a/Documentation/DocBook/filesystems.tmpl b/Documentation/DocBook/filesystems.tmpl
index 5e87ad58c0b5..f51f28531b8d 100644
--- a/Documentation/DocBook/filesystems.tmpl
+++ b/Documentation/DocBook/filesystems.tmpl
@@ -82,6 +82,11 @@
      </sect1>
   </chapter>
 
+  <chapter id="fs_events">
+     <title>Events based on file descriptors</title>
+!Efs/eventfd.c
+  </chapter>
+
   <chapter id="sysfs">
      <title>The Filesystem for Exporting Kernel Objects</title>
 !Efs/sysfs/file.c
diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42
index 0e76ef12e4c6..a22ecf48f255 100644
--- a/Documentation/hwmon/jc42
+++ b/Documentation/hwmon/jc42
@@ -51,7 +51,8 @@ Supported chips:
   * JEDEC JC 42.4 compliant temperature sensor chips
     Prefix: 'jc42'
     Addresses scanned: I2C 0x18 - 0x1f
-    Datasheet: -
+    Datasheet:
+	http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf
 
 Author:
 	Guenter Roeck <guenter.roeck@ericsson.com>
@@ -60,7 +61,11 @@ Author:
 Description
 -----------
 
-This driver implements support for JEDEC JC 42.4 compliant temperature sensors.
+This driver implements support for JEDEC JC 42.4 compliant temperature sensors,
+which are used on many DDR3 memory modules for mobile devices and servers. Some
+systems use the sensor to prevent memory overheating by automatically throttling
+the memory controller.
+
 The driver auto-detects the chips listed above, but can be manually instantiated
 to support other JC 42.4 compliant chips.
 
@@ -81,15 +86,19 @@ limits. The chip supports only a single register to configure the hysteresis,
 which applies to all limits. This register can be written by writing into
 temp1_crit_hyst. Other hysteresis attributes are read-only.
 
+If the BIOS has configured the sensor for automatic temperature management, it
+is likely that it has locked the registers, i.e., that the temperature limits
+cannot be changed.
+
 Sysfs entries
 -------------
 
 temp1_input		Temperature (RO)
-temp1_min		Minimum temperature (RW)
-temp1_max		Maximum temperature (RW)
-temp1_crit		Critical high temperature (RW)
+temp1_min		Minimum temperature (RO or RW)
+temp1_max		Maximum temperature (RO or RW)
+temp1_crit		Critical high temperature (RO or RW)
 
-temp1_crit_hyst		Critical hysteresis temperature (RW)
+temp1_crit_hyst		Critical hysteresis temperature (RO or RW)
 temp1_max_hyst		Maximum hysteresis temperature (RO)
 
 temp1_min_alarm		Temperature low alarm
diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp
index 6526eee525a6..d2b56a4fd1f5 100644
--- a/Documentation/hwmon/k10temp
+++ b/Documentation/hwmon/k10temp
@@ -9,6 +9,8 @@ Supported chips:
   Socket S1G3: Athlon II, Sempron, Turion II
 * AMD Family 11h processors:
   Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
+* AMD Family 12h processors: "Llano"
+* AMD Family 14h processors: "Brazos" (C/E/G-Series)
 
   Prefix: 'k10temp'
   Addresses scanned: PCI space
@@ -17,10 +19,14 @@ Supported chips:
     http://support.amd.com/us/Processor_TechDocs/31116.pdf
   BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41256.pdf
+  BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
+    http://support.amd.com/us/Processor_TechDocs/43170.pdf
   Revision Guide for AMD Family 10h Processors:
     http://support.amd.com/us/Processor_TechDocs/41322.pdf
   Revision Guide for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41788.pdf
+  Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
+    http://support.amd.com/us/Processor_TechDocs/47534.pdf
   AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
     http://support.amd.com/us/Processor_TechDocs/43373.pdf
   AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet:
@@ -34,7 +40,7 @@ Description
 -----------
 
 This driver permits reading of the internal temperature sensor of AMD
-Family 10h and 11h processors.
+Family 10h/11h/12h/14h processors.
 
 All these processors have a sensor, but on those for Socket F or AM2+,
 the sensor may return inconsistent values (erratum 319).  The driver
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 89835a4766a6..f4a04c0c7edc 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -144,6 +144,11 @@ a fixed number of characters. This limit depends on the architecture
 and is between 256 and 4096 characters. It is defined in the file
 ./include/asm/setup.h as COMMAND_LINE_SIZE.
 
+Finally, the [KMG] suffix is commonly described after a number of kernel
+parameter values. These 'K', 'M', and 'G' letters represent the _binary_
+multipliers 'Kilo', 'Mega', and 'Giga', equalling 2^10, 2^20, and 2^30
+bytes respectively. Such letter suffixes can also be entirely omitted.
+
 
 	acpi=		[HW,ACPI,X86]
 			Advanced Configuration and Power Interface
@@ -545,16 +550,20 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format:
 			<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
 
-	crashkernel=nn[KMG]@ss[KMG]
-			[KNL] Reserve a chunk of physical memory to
-			hold a kernel to switch to with kexec on panic.
+	crashkernel=size[KMG][@offset[KMG]]
+			[KNL] Using kexec, Linux can switch to a 'crash kernel'
+			upon panic. This parameter reserves the physical
+			memory region [offset, offset + size] for that kernel
+			image. If '@offset' is omitted, then a suitable offset
+			is selected automatically. Check
+			Documentation/kdump/kdump.txt for further details.
 
 	crashkernel=range1:size1[,range2:size2,...][@offset]
 			[KNL] Same as above, but depends on the memory
 			in the running system. The syntax of range is
 			start-[end] where start and end are both
 			a memory unit (amount[KMG]). See also
-			Documentation/kdump/kdump.txt for a example.
+			Documentation/kdump/kdump.txt for an example.
 
 	cs89x0_dma=	[HW,NET]
 			Format: <dma>
@@ -1262,10 +1271,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			6 (KERN_INFO)		informational
 			7 (KERN_DEBUG)		debug-level messages
 
-	log_buf_len=n	Sets the size of the printk ring buffer, in bytes.
-			Format: { n | nk | nM }
-			n must be a power of two.  The default size
-			is set in the kernel config file.
+	log_buf_len=n[KMG]	Sets the size of the printk ring buffer,
+			in bytes.  n must be a power of two.  The default
+			size is set in the kernel config file.
 
 	logo.nologo	[FB] Disables display of the built-in Linux logo.
 			This may be used to provide more screen space for
diff --git a/MAINTAINERS b/MAINTAINERS
index 5dd6c751e6a6..6f99e1260db8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -885,7 +885,7 @@ S:	Supported
 
 ARM/QUALCOMM MSM MACHINE SUPPORT
 M:	David Brown <davidb@codeaurora.org>
-M:	Daniel Walker <dwalker@codeaurora.org>
+M:	Daniel Walker <dwalker@fifo99.com>
 M:	Bryan Huntsman <bryanh@codeaurora.org>
 L:	linux-arm-msm@vger.kernel.org
 F:	arch/arm/mach-msm/
@@ -2873,7 +2873,6 @@ M:	Guenter Roeck <guenter.roeck@ericsson.com>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
-T:	quilt kernel.org/pub/linux/kernel/people/groeck/linux-staging/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
 S:	Maintained
 F:	Documentation/hwmon/
diff --git a/Makefile b/Makefile
index 5e40aa2acbff..26d7d824db51 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 38
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index fbc5b775f895..b166b1d845d7 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -347,6 +347,7 @@ static struct platform_device *pxa25x_devices[] __initdata = {
 	&pxa25x_device_assp,
 	&pxa25x_device_pwm0,
 	&pxa25x_device_pwm1,
+	&pxa_device_asoc_platform,
 };
 
 static struct sys_device pxa25x_sysdev[] = {
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
index c31e601eb49c..b9b1e5c2b290 100644
--- a/arch/arm/mach-pxa/tosa-bt.c
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -81,8 +81,6 @@ static int tosa_bt_probe(struct platform_device *dev)
 		goto err_rfk_alloc;
 	}
 
-	rfkill_set_led_trigger_name(rfk, "tosa-bt");
-
 	rc = rfkill_register(rfk);
 	if (rc)
 		goto err_rfkill;
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index af152e70cfcf..f2582ec300d9 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -875,6 +875,11 @@ static struct platform_device sharpsl_rom_device = {
 	.dev.platform_data = &sharpsl_rom_data,
 };
 
+static struct platform_device wm9712_device = {
+	.name	= "wm9712-codec",
+	.id	= -1,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&tosascoop_device,
 	&tosascoop_jc_device,
@@ -885,6 +890,7 @@ static struct platform_device *devices[] __initdata = {
 	&tosaled_device,
 	&tosa_bt_device,
 	&sharpsl_rom_device,
+	&wm9712_device,
 };
 
 static void tosa_poweroff(void)
diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h
index 203dd5a18bd5..058dab4482a1 100644
--- a/arch/arm/mach-s5p6442/include/mach/map.h
+++ b/arch/arm/mach-s5p6442/include/mach/map.h
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s5p6442/include/mach/map.h
  *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
  * S5P6442 - Memory map definitions
@@ -16,56 +16,61 @@
 #include <plat/map-base.h>
 #include <plat/map-s5p.h>
 
-#define S5P6442_PA_CHIPID	(0xE0000000)
-#define S5P_PA_CHIPID		S5P6442_PA_CHIPID
+#define S5P6442_PA_SDRAM	0x20000000
 
-#define S5P6442_PA_SYSCON	(0xE0100000)
-#define S5P_PA_SYSCON		S5P6442_PA_SYSCON
+#define S5P6442_PA_I2S0		0xC0B00000
+#define S5P6442_PA_I2S1		0xF2200000
 
-#define S5P6442_PA_GPIO		(0xE0200000)
+#define S5P6442_PA_CHIPID	0xE0000000
 
-#define S5P6442_PA_VIC0		(0xE4000000)
-#define S5P6442_PA_VIC1		(0xE4100000)
-#define S5P6442_PA_VIC2		(0xE4200000)
+#define S5P6442_PA_SYSCON	0xE0100000
 
-#define S5P6442_PA_SROMC	(0xE7000000)
-#define S5P_PA_SROMC		S5P6442_PA_SROMC
+#define S5P6442_PA_GPIO		0xE0200000
 
-#define S5P6442_PA_MDMA		0xE8000000
-#define S5P6442_PA_PDMA		0xE9000000
+#define S5P6442_PA_VIC0		0xE4000000
+#define S5P6442_PA_VIC1		0xE4100000
+#define S5P6442_PA_VIC2		0xE4200000
 
-#define S5P6442_PA_TIMER	(0xEA000000)
-#define S5P_PA_TIMER		S5P6442_PA_TIMER
+#define S5P6442_PA_SROMC	0xE7000000
 
-#define S5P6442_PA_SYSTIMER   	(0xEA100000)
+#define S5P6442_PA_MDMA		0xE8000000
+#define S5P6442_PA_PDMA		0xE9000000
 
-#define S5P6442_PA_WATCHDOG	(0xEA200000)
+#define S5P6442_PA_TIMER	0xEA000000
 
-#define S5P6442_PA_UART		(0xEC000000)
+#define S5P6442_PA_SYSTIMER	0xEA100000
 
-#define S5P_PA_UART0		(S5P6442_PA_UART + 0x0)
-#define S5P_PA_UART1		(S5P6442_PA_UART + 0x400)
-#define S5P_PA_UART2		(S5P6442_PA_UART + 0x800)
-#define S5P_SZ_UART		SZ_256
+#define S5P6442_PA_WATCHDOG	0xEA200000
 
-#define S5P6442_PA_IIC0		(0xEC100000)
+#define S5P6442_PA_UART		0xEC000000
 
-#define S5P6442_PA_SDRAM	(0x20000000)
-#define S5P_PA_SDRAM		S5P6442_PA_SDRAM
+#define S5P6442_PA_IIC0		0xEC100000
 
 #define S5P6442_PA_SPI		0xEC300000
 
-/* I2S */
-#define S5P6442_PA_I2S0		0xC0B00000
-#define S5P6442_PA_I2S1		0xF2200000
-
-/* PCM */
 #define S5P6442_PA_PCM0		0xF2400000
 #define S5P6442_PA_PCM1		0xF2500000
 
-/* compatibiltiy defines. */
+/* Compatibiltiy Defines */
+
+#define S3C_PA_IIC		S5P6442_PA_IIC0
 #define S3C_PA_WDT		S5P6442_PA_WATCHDOG
+
+#define S5P_PA_CHIPID		S5P6442_PA_CHIPID
+#define S5P_PA_SDRAM		S5P6442_PA_SDRAM
+#define S5P_PA_SROMC		S5P6442_PA_SROMC
+#define S5P_PA_SYSCON		S5P6442_PA_SYSCON
+#define S5P_PA_TIMER		S5P6442_PA_TIMER
+
+/* UART */
+
 #define S3C_PA_UART		S5P6442_PA_UART
-#define S3C_PA_IIC		S5P6442_PA_IIC0
+
+#define S5P_PA_UART(x)		(S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0		S5P_PA_UART(0)
+#define S5P_PA_UART1		S5P_PA_UART(1)
+#define S5P_PA_UART2		S5P_PA_UART(2)
+
+#define S5P_SZ_UART		SZ_256
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
index a9365e5ba614..95c91257c7ca 100644
--- a/arch/arm/mach-s5p64x0/include/mach/map.h
+++ b/arch/arm/mach-s5p64x0/include/mach/map.h
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s5p64x0/include/mach/map.h
  *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
  * S5P64X0 - Memory map definitions
@@ -16,64 +16,46 @@
 #include <plat/map-base.h>
 #include <plat/map-s5p.h>
 
-#define S5P64X0_PA_SDRAM	(0x20000000)
+#define S5P64X0_PA_SDRAM	0x20000000
 
-#define S5P64X0_PA_CHIPID	(0xE0000000)
-#define S5P_PA_CHIPID		S5P64X0_PA_CHIPID
-
-#define S5P64X0_PA_SYSCON	(0xE0100000)
-#define S5P_PA_SYSCON		S5P64X0_PA_SYSCON
-
-#define S5P64X0_PA_GPIO		(0xE0308000)
-
-#define S5P64X0_PA_VIC0		(0xE4000000)
-#define S5P64X0_PA_VIC1		(0xE4100000)
+#define S5P64X0_PA_CHIPID	0xE0000000
 
-#define S5P64X0_PA_SROMC	(0xE7000000)
-#define S5P_PA_SROMC		S5P64X0_PA_SROMC
-
-#define S5P64X0_PA_PDMA		(0xE9000000)
-
-#define S5P64X0_PA_TIMER	(0xEA000000)
-#define S5P_PA_TIMER		S5P64X0_PA_TIMER
+#define S5P64X0_PA_SYSCON	0xE0100000
 
-#define S5P64X0_PA_RTC		(0xEA100000)
+#define S5P64X0_PA_GPIO		0xE0308000
 
-#define S5P64X0_PA_WDT		(0xEA200000)
+#define S5P64X0_PA_VIC0		0xE4000000
+#define S5P64X0_PA_VIC1		0xE4100000
 
-#define S5P6440_PA_UART(x)	(0xEC000000 + ((x) * S3C_UART_OFFSET))
-#define S5P6450_PA_UART(x)	((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000))
+#define S5P64X0_PA_SROMC	0xE7000000
 
-#define S5P_PA_UART0		S5P6450_PA_UART(0)
-#define S5P_PA_UART1		S5P6450_PA_UART(1)
-#define S5P_PA_UART2		S5P6450_PA_UART(2)
-#define S5P_PA_UART3		S5P6450_PA_UART(3)
-#define S5P_PA_UART4		S5P6450_PA_UART(4)
-#define S5P_PA_UART5		S5P6450_PA_UART(5)
+#define S5P64X0_PA_PDMA		0xE9000000
 
-#define S5P_SZ_UART		SZ_256
+#define S5P64X0_PA_TIMER	0xEA000000
+#define S5P64X0_PA_RTC		0xEA100000
+#define S5P64X0_PA_WDT		0xEA200000
 
-#define S5P6440_PA_IIC0		(0xEC104000)
-#define S5P6440_PA_IIC1		(0xEC20F000)
-#define S5P6450_PA_IIC0		(0xEC100000)
-#define S5P6450_PA_IIC1		(0xEC200000)
+#define S5P6440_PA_IIC0		0xEC104000
+#define S5P6440_PA_IIC1		0xEC20F000
+#define S5P6450_PA_IIC0		0xEC100000
+#define S5P6450_PA_IIC1		0xEC200000
 
-#define S5P64X0_PA_SPI0		(0xEC400000)
-#define S5P64X0_PA_SPI1		(0xEC500000)
+#define S5P64X0_PA_SPI0		0xEC400000
+#define S5P64X0_PA_SPI1		0xEC500000
 
-#define S5P64X0_PA_HSOTG	(0xED100000)
+#define S5P64X0_PA_HSOTG	0xED100000
 
 #define S5P64X0_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
 
-#define S5P64X0_PA_I2S		(0xF2000000)
+#define S5P64X0_PA_I2S		0xF2000000
 #define S5P6450_PA_I2S1		0xF2800000
 #define S5P6450_PA_I2S2		0xF2900000
 
-#define S5P64X0_PA_PCM		(0xF2100000)
+#define S5P64X0_PA_PCM		0xF2100000
 
-#define S5P64X0_PA_ADC		(0xF3000000)
+#define S5P64X0_PA_ADC		0xF3000000
 
-/* compatibiltiy defines. */
+/* Compatibiltiy Defines */
 
 #define S3C_PA_HSMMC0		S5P64X0_PA_HSMMC(0)
 #define S3C_PA_HSMMC1		S5P64X0_PA_HSMMC(1)
@@ -83,6 +65,25 @@
 #define S3C_PA_RTC		S5P64X0_PA_RTC
 #define S3C_PA_WDT		S5P64X0_PA_WDT
 
+#define S5P_PA_CHIPID		S5P64X0_PA_CHIPID
+#define S5P_PA_SROMC		S5P64X0_PA_SROMC
+#define S5P_PA_SYSCON		S5P64X0_PA_SYSCON
+#define S5P_PA_TIMER		S5P64X0_PA_TIMER
+
 #define SAMSUNG_PA_ADC		S5P64X0_PA_ADC
 
+/* UART */
+
+#define S5P6440_PA_UART(x)	(0xEC000000 + ((x) * S3C_UART_OFFSET))
+#define S5P6450_PA_UART(x)	((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000))
+
+#define S5P_PA_UART0		S5P6450_PA_UART(0)
+#define S5P_PA_UART1		S5P6450_PA_UART(1)
+#define S5P_PA_UART2		S5P6450_PA_UART(2)
+#define S5P_PA_UART3		S5P6450_PA_UART(3)
+#define S5P_PA_UART4		S5P6450_PA_UART(4)
+#define S5P_PA_UART5		S5P6450_PA_UART(5)
+
+#define S5P_SZ_UART		SZ_256
+
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index 328467b346aa..ccbe6b767f7d 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -1,5 +1,8 @@
 /* linux/arch/arm/mach-s5pc100/include/mach/map.h
  *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
  * Copyright 2009 Samsung Electronics Co.
  *	Byungho Min <bhmin@samsung.com>
  *
@@ -16,145 +19,115 @@
 #include <plat/map-base.h>
 #include <plat/map-s5p.h>
 
-/*
- * map-base.h has already defined virtual memory address
- * S3C_VA_IRQ		S3C_ADDR(0x00000000)	irq controller(s)
- * S3C_VA_SYS		S3C_ADDR(0x00100000)	system control
- * S3C_VA_MEM		S3C_ADDR(0x00200000)	system control (not used)
- * S3C_VA_TIMER		S3C_ADDR(0x00300000)	timer block
- * S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	watchdog
- * S3C_VA_UART		S3C_ADDR(0x01000000)	UART
- *
- * S5PC100 specific virtual memory address can be defined here
- * S5PC1XX_VA_GPIO	S3C_ADDR(0x00500000)	GPIO
- *
- */
+#define S5PC100_PA_SDRAM		0x20000000
+
+#define S5PC100_PA_ONENAND		0xE7100000
+#define S5PC100_PA_ONENAND_BUF		0xB0000000
+
+#define S5PC100_PA_CHIPID		0xE0000000
 
-#define S5PC100_PA_ONENAND_BUF	(0xB0000000)
-#define S5PC100_SZ_ONENAND_BUF	(SZ_256M - SZ_32M)
+#define S5PC100_PA_SYSCON		0xE0100000
 
-/* Chip ID */
+#define S5PC100_PA_OTHERS		0xE0200000
 
-#define S5PC100_PA_CHIPID	(0xE0000000)
-#define S5P_PA_CHIPID		S5PC100_PA_CHIPID
+#define S5PC100_PA_GPIO			0xE0300000
 
-#define S5PC100_PA_SYSCON	(0xE0100000)
-#define S5P_PA_SYSCON		S5PC100_PA_SYSCON
+#define S5PC100_PA_VIC0			0xE4000000
+#define S5PC100_PA_VIC1			0xE4100000
+#define S5PC100_PA_VIC2			0xE4200000
 
-#define S5PC100_PA_OTHERS	(0xE0200000)
-#define S5PC100_VA_OTHERS	(S3C_VA_SYS + 0x10000)
+#define S5PC100_PA_SROMC		0xE7000000
 
-#define S5PC100_PA_GPIO		(0xE0300000)
-#define S5PC1XX_VA_GPIO		S3C_ADDR(0x00500000)
+#define S5PC100_PA_CFCON		0xE7800000
 
-/* Interrupt */
-#define S5PC100_PA_VIC0		(0xE4000000)
-#define S5PC100_PA_VIC1		(0xE4100000)
-#define S5PC100_PA_VIC2		(0xE4200000)
-#define S5PC100_VA_VIC		S3C_VA_IRQ
-#define S5PC100_VA_VIC_OFFSET	0x10000
-#define S5PC1XX_VA_VIC(x)	(S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
+#define S5PC100_PA_MDMA			0xE8100000
+#define S5PC100_PA_PDMA0		0xE9000000
+#define S5PC100_PA_PDMA1		0xE9200000
 
-#define S5PC100_PA_SROMC	(0xE7000000)
-#define S5P_PA_SROMC		S5PC100_PA_SROMC
+#define S5PC100_PA_TIMER		0xEA000000
+#define S5PC100_PA_SYSTIMER		0xEA100000
+#define S5PC100_PA_WATCHDOG		0xEA200000
+#define S5PC100_PA_RTC			0xEA300000
 
-#define S5PC100_PA_ONENAND	(0xE7100000)
+#define S5PC100_PA_UART			0xEC000000
 
-#define S5PC100_PA_CFCON	(0xE7800000)
+#define S5PC100_PA_IIC0			0xEC100000
+#define S5PC100_PA_IIC1			0xEC200000
 
-/* DMA */
-#define S5PC100_PA_MDMA		(0xE8100000)
-#define S5PC100_PA_PDMA0	(0xE9000000)
-#define S5PC100_PA_PDMA1	(0xE9200000)
+#define S5PC100_PA_SPI0			0xEC300000
+#define S5PC100_PA_SPI1			0xEC400000
+#define S5PC100_PA_SPI2			0xEC500000
 
-/* Timer */
-#define S5PC100_PA_TIMER	(0xEA000000)
-#define S5P_PA_TIMER		S5PC100_PA_TIMER
+#define S5PC100_PA_USB_HSOTG		0xED200000
+#define S5PC100_PA_USB_HSPHY		0xED300000
 
-#define S5PC100_PA_SYSTIMER	(0xEA100000)
+#define S5PC100_PA_HSMMC(x)		(0xED800000 + ((x) * 0x100000))
 
-#define S5PC100_PA_WATCHDOG	(0xEA200000)
-#define S5PC100_PA_RTC		(0xEA300000)
+#define S5PC100_PA_FB			0xEE000000
 
-#define S5PC100_PA_UART		(0xEC000000)
+#define S5PC100_PA_FIMC0		0xEE200000
+#define S5PC100_PA_FIMC1		0xEE300000
+#define S5PC100_PA_FIMC2		0xEE400000
 
-#define S5P_PA_UART0		(S5PC100_PA_UART + 0x0)
-#define S5P_PA_UART1		(S5PC100_PA_UART + 0x400)
-#define S5P_PA_UART2		(S5PC100_PA_UART + 0x800)
-#define S5P_PA_UART3		(S5PC100_PA_UART + 0xC00)
-#define S5P_SZ_UART		SZ_256
+#define S5PC100_PA_I2S0			0xF2000000
+#define S5PC100_PA_I2S1			0xF2100000
+#define S5PC100_PA_I2S2			0xF2200000
 
-#define S5PC100_PA_IIC0		(0xEC100000)
-#define S5PC100_PA_IIC1		(0xEC200000)
+#define S5PC100_PA_AC97			0xF2300000
 
-/* SPI */
-#define S5PC100_PA_SPI0		0xEC300000
-#define S5PC100_PA_SPI1		0xEC400000
-#define S5PC100_PA_SPI2		0xEC500000
+#define S5PC100_PA_PCM0			0xF2400000
+#define S5PC100_PA_PCM1			0xF2500000
 
-/* USB HS OTG */
-#define S5PC100_PA_USB_HSOTG	(0xED200000)
-#define S5PC100_PA_USB_HSPHY	(0xED300000)
+#define S5PC100_PA_SPDIF		0xF2600000
 
-#define S5PC100_PA_FB		(0xEE000000)
+#define S5PC100_PA_TSADC		0xF3000000
 
-#define S5PC100_PA_FIMC0	(0xEE200000)
-#define S5PC100_PA_FIMC1	(0xEE300000)
-#define S5PC100_PA_FIMC2	(0xEE400000)
+#define S5PC100_PA_KEYPAD		0xF3100000
 
-#define S5PC100_PA_I2S0		(0xF2000000)
-#define S5PC100_PA_I2S1		(0xF2100000)
-#define S5PC100_PA_I2S2		(0xF2200000)
+/* Compatibiltiy Defines */
 
-#define S5PC100_PA_AC97		0xF2300000
+#define S3C_PA_FB			S5PC100_PA_FB
+#define S3C_PA_HSMMC0			S5PC100_PA_HSMMC(0)
+#define S3C_PA_HSMMC1			S5PC100_PA_HSMMC(1)
+#define S3C_PA_HSMMC2			S5PC100_PA_HSMMC(2)
+#define S3C_PA_IIC			S5PC100_PA_IIC0
+#define S3C_PA_IIC1			S5PC100_PA_IIC1
+#define S3C_PA_KEYPAD			S5PC100_PA_KEYPAD
+#define S3C_PA_ONENAND			S5PC100_PA_ONENAND
+#define S3C_PA_ONENAND_BUF		S5PC100_PA_ONENAND_BUF
+#define S3C_PA_RTC			S5PC100_PA_RTC
+#define S3C_PA_TSADC			S5PC100_PA_TSADC
+#define S3C_PA_USB_HSOTG		S5PC100_PA_USB_HSOTG
+#define S3C_PA_USB_HSPHY		S5PC100_PA_USB_HSPHY
+#define S3C_PA_WDT			S5PC100_PA_WATCHDOG
 
-/* PCM */
-#define S5PC100_PA_PCM0		0xF2400000
-#define S5PC100_PA_PCM1		0xF2500000
+#define S5P_PA_CHIPID			S5PC100_PA_CHIPID
+#define S5P_PA_FIMC0			S5PC100_PA_FIMC0
+#define S5P_PA_FIMC1			S5PC100_PA_FIMC1
+#define S5P_PA_FIMC2			S5PC100_PA_FIMC2
+#define S5P_PA_SDRAM			S5PC100_PA_SDRAM
+#define S5P_PA_SROMC			S5PC100_PA_SROMC
+#define S5P_PA_SYSCON			S5PC100_PA_SYSCON
+#define S5P_PA_TIMER			S5PC100_PA_TIMER
 
-#define S5PC100_PA_SPDIF	0xF2600000
+#define SAMSUNG_PA_ADC			S5PC100_PA_TSADC
+#define SAMSUNG_PA_CFCON		S5PC100_PA_CFCON
+#define SAMSUNG_PA_KEYPAD		S5PC100_PA_KEYPAD
 
-#define S5PC100_PA_TSADC	(0xF3000000)
+#define S5PC100_VA_OTHERS		(S3C_VA_SYS + 0x10000)
 
-/* KEYPAD */
-#define S5PC100_PA_KEYPAD	(0xF3100000)
+#define S3C_SZ_ONENAND_BUF		(SZ_256M - SZ_32M)
 
-#define S5PC100_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
+/* UART */
 
-#define S5PC100_PA_SDRAM	(0x20000000)
-#define S5P_PA_SDRAM		S5PC100_PA_SDRAM
+#define S3C_PA_UART			S5PC100_PA_UART
 
-/* compatibiltiy defines. */
-#define S3C_PA_UART		S5PC100_PA_UART
-#define S3C_PA_IIC		S5PC100_PA_IIC0
-#define S3C_PA_IIC1		S5PC100_PA_IIC1
-#define S3C_PA_FB		S5PC100_PA_FB
-#define S3C_PA_G2D		S5PC100_PA_G2D
-#define S3C_PA_G3D		S5PC100_PA_G3D
-#define S3C_PA_JPEG		S5PC100_PA_JPEG
-#define S3C_PA_ROTATOR		S5PC100_PA_ROTATOR
-#define S5P_VA_VIC0		S5PC1XX_VA_VIC(0)
-#define S5P_VA_VIC1		S5PC1XX_VA_VIC(1)
-#define S5P_VA_VIC2		S5PC1XX_VA_VIC(2)
-#define S3C_PA_USB_HSOTG	S5PC100_PA_USB_HSOTG
-#define S3C_PA_USB_HSPHY	S5PC100_PA_USB_HSPHY
-#define S3C_PA_HSMMC0		S5PC100_PA_HSMMC(0)
-#define S3C_PA_HSMMC1		S5PC100_PA_HSMMC(1)
-#define S3C_PA_HSMMC2		S5PC100_PA_HSMMC(2)
-#define S3C_PA_KEYPAD		S5PC100_PA_KEYPAD
-#define S3C_PA_WDT		S5PC100_PA_WATCHDOG
-#define S3C_PA_TSADC		S5PC100_PA_TSADC
-#define S3C_PA_ONENAND		S5PC100_PA_ONENAND
-#define S3C_PA_ONENAND_BUF	S5PC100_PA_ONENAND_BUF
-#define S3C_SZ_ONENAND_BUF	S5PC100_SZ_ONENAND_BUF
-#define S3C_PA_RTC		S5PC100_PA_RTC
-
-#define SAMSUNG_PA_ADC		S5PC100_PA_TSADC
-#define SAMSUNG_PA_CFCON	S5PC100_PA_CFCON
-#define SAMSUNG_PA_KEYPAD	S5PC100_PA_KEYPAD
+#define S5P_PA_UART(x)			(S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0			S5P_PA_UART(0)
+#define S5P_PA_UART1			S5P_PA_UART(1)
+#define S5P_PA_UART2			S5P_PA_UART(2)
+#define S5P_PA_UART3			S5P_PA_UART(3)
 
-#define S5P_PA_FIMC0		S5PC100_PA_FIMC0
-#define S5P_PA_FIMC1		S5PC100_PA_FIMC1
-#define S5P_PA_FIMC2		S5PC100_PA_FIMC2
+#define S5P_SZ_UART			SZ_256
 
-#endif /* __ASM_ARCH_C100_MAP_H */
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index 3611492ad681..1dd58836fd4f 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s5pv210/include/mach/map.h
  *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
  * S5PV210 - Memory map definitions
@@ -16,122 +16,120 @@
 #include <plat/map-base.h>
 #include <plat/map-s5p.h>
 
-#define S5PV210_PA_SROM_BANK5	(0xA8000000)
+#define S5PV210_PA_SDRAM		0x20000000
 
-#define S5PC110_PA_ONENAND	(0xB0000000)
-#define S5P_PA_ONENAND		S5PC110_PA_ONENAND
+#define S5PV210_PA_SROM_BANK5		0xA8000000
 
-#define S5PC110_PA_ONENAND_DMA	(0xB0600000)
-#define S5P_PA_ONENAND_DMA	S5PC110_PA_ONENAND_DMA
+#define S5PC110_PA_ONENAND		0xB0000000
+#define S5PC110_PA_ONENAND_DMA		0xB0600000
 
-#define S5PV210_PA_CHIPID	(0xE0000000)
-#define S5P_PA_CHIPID		S5PV210_PA_CHIPID
+#define S5PV210_PA_CHIPID		0xE0000000
 
-#define S5PV210_PA_SYSCON	(0xE0100000)
-#define S5P_PA_SYSCON		S5PV210_PA_SYSCON
+#define S5PV210_PA_SYSCON		0xE0100000
 
-#define S5PV210_PA_GPIO		(0xE0200000)
+#define S5PV210_PA_GPIO			0xE0200000
 
-/* SPI */
-#define S5PV210_PA_SPI0		0xE1300000
-#define S5PV210_PA_SPI1		0xE1400000
+#define S5PV210_PA_SPDIF		0xE1100000
 
-#define S5PV210_PA_KEYPAD	(0xE1600000)
+#define S5PV210_PA_SPI0			0xE1300000
+#define S5PV210_PA_SPI1			0xE1400000
 
-#define S5PV210_PA_IIC0		(0xE1800000)
-#define S5PV210_PA_IIC1		(0xFAB00000)
-#define S5PV210_PA_IIC2		(0xE1A00000)
+#define S5PV210_PA_KEYPAD		0xE1600000
 
-#define S5PV210_PA_TIMER	(0xE2500000)
-#define S5P_PA_TIMER		S5PV210_PA_TIMER
+#define S5PV210_PA_ADC			0xE1700000
 
-#define S5PV210_PA_SYSTIMER	(0xE2600000)
+#define S5PV210_PA_IIC0			0xE1800000
+#define S5PV210_PA_IIC1			0xFAB00000
+#define S5PV210_PA_IIC2			0xE1A00000
 
-#define S5PV210_PA_WATCHDOG	(0xE2700000)
+#define S5PV210_PA_AC97			0xE2200000
 
-#define S5PV210_PA_RTC		(0xE2800000)
-#define S5PV210_PA_UART		(0xE2900000)
+#define S5PV210_PA_PCM0			0xE2300000
+#define S5PV210_PA_PCM1			0xE1200000
+#define S5PV210_PA_PCM2			0xE2B00000
 
-#define S5P_PA_UART0		(S5PV210_PA_UART + 0x0)
-#define S5P_PA_UART1		(S5PV210_PA_UART + 0x400)
-#define S5P_PA_UART2		(S5PV210_PA_UART + 0x800)
-#define S5P_PA_UART3		(S5PV210_PA_UART + 0xC00)
+#define S5PV210_PA_TIMER		0xE2500000
+#define S5PV210_PA_SYSTIMER		0xE2600000
+#define S5PV210_PA_WATCHDOG		0xE2700000
+#define S5PV210_PA_RTC			0xE2800000
 
-#define S5P_SZ_UART		SZ_256
+#define S5PV210_PA_UART			0xE2900000
 
-#define S3C_VA_UARTx(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define S5PV210_PA_SROMC		0xE8000000
 
-#define S5PV210_PA_SROMC	(0xE8000000)
-#define S5P_PA_SROMC		S5PV210_PA_SROMC
+#define S5PV210_PA_CFCON		0xE8200000
 
-#define S5PV210_PA_CFCON	(0xE8200000)
+#define S5PV210_PA_HSMMC(x)		(0xEB000000 + ((x) * 0x100000))
 
-#define S5PV210_PA_MDMA		0xFA200000
-#define S5PV210_PA_PDMA0	0xE0900000
-#define S5PV210_PA_PDMA1	0xE0A00000
+#define S5PV210_PA_HSOTG		0xEC000000
+#define S5PV210_PA_HSPHY		0xEC100000
 
-#define S5PV210_PA_FB		(0xF8000000)
+#define S5PV210_PA_IIS0			0xEEE30000
+#define S5PV210_PA_IIS1			0xE2100000
+#define S5PV210_PA_IIS2			0xE2A00000
 
-#define S5PV210_PA_FIMC0	(0xFB200000)
-#define S5PV210_PA_FIMC1	(0xFB300000)
-#define S5PV210_PA_FIMC2	(0xFB400000)
+#define S5PV210_PA_DMC0			0xF0000000
+#define S5PV210_PA_DMC1			0xF1400000
 
-#define S5PV210_PA_HSMMC(x)	(0xEB000000 + ((x) * 0x100000))
+#define S5PV210_PA_VIC0			0xF2000000
+#define S5PV210_PA_VIC1			0xF2100000
+#define S5PV210_PA_VIC2			0xF2200000
+#define S5PV210_PA_VIC3			0xF2300000
 
-#define S5PV210_PA_HSOTG	(0xEC000000)
-#define S5PV210_PA_HSPHY	(0xEC100000)
+#define S5PV210_PA_FB			0xF8000000
 
-#define S5PV210_PA_VIC0		(0xF2000000)
-#define S5PV210_PA_VIC1		(0xF2100000)
-#define S5PV210_PA_VIC2		(0xF2200000)
-#define S5PV210_PA_VIC3		(0xF2300000)
+#define S5PV210_PA_MDMA			0xFA200000
+#define S5PV210_PA_PDMA0		0xE0900000
+#define S5PV210_PA_PDMA1		0xE0A00000
 
-#define S5PV210_PA_SDRAM	(0x20000000)
-#define S5P_PA_SDRAM		S5PV210_PA_SDRAM
+#define S5PV210_PA_MIPI_CSIS		0xFA600000
 
-/* S/PDIF */
-#define S5PV210_PA_SPDIF	0xE1100000
+#define S5PV210_PA_FIMC0		0xFB200000
+#define S5PV210_PA_FIMC1		0xFB300000
+#define S5PV210_PA_FIMC2		0xFB400000
 
-/* I2S */
-#define S5PV210_PA_IIS0		0xEEE30000
-#define S5PV210_PA_IIS1		0xE2100000
-#define S5PV210_PA_IIS2		0xE2A00000
+/* Compatibiltiy Defines */
 
-/* PCM */
-#define S5PV210_PA_PCM0		0xE2300000
-#define S5PV210_PA_PCM1		0xE1200000
-#define S5PV210_PA_PCM2		0xE2B00000
+#define S3C_PA_FB			S5PV210_PA_FB
+#define S3C_PA_HSMMC0			S5PV210_PA_HSMMC(0)
+#define S3C_PA_HSMMC1			S5PV210_PA_HSMMC(1)
+#define S3C_PA_HSMMC2			S5PV210_PA_HSMMC(2)
+#define S3C_PA_HSMMC3			S5PV210_PA_HSMMC(3)
+#define S3C_PA_IIC			S5PV210_PA_IIC0
+#define S3C_PA_IIC1			S5PV210_PA_IIC1
+#define S3C_PA_IIC2			S5PV210_PA_IIC2
+#define S3C_PA_RTC			S5PV210_PA_RTC
+#define S3C_PA_USB_HSOTG		S5PV210_PA_HSOTG
+#define S3C_PA_WDT			S5PV210_PA_WATCHDOG
 
-/* AC97 */
-#define S5PV210_PA_AC97		0xE2200000
+#define S5P_PA_CHIPID			S5PV210_PA_CHIPID
+#define S5P_PA_FIMC0			S5PV210_PA_FIMC0
+#define S5P_PA_FIMC1			S5PV210_PA_FIMC1
+#define S5P_PA_FIMC2			S5PV210_PA_FIMC2
+#define S5P_PA_MIPI_CSIS0		S5PV210_PA_MIPI_CSIS
+#define S5P_PA_ONENAND			S5PC110_PA_ONENAND
+#define S5P_PA_ONENAND_DMA		S5PC110_PA_ONENAND_DMA
+#define S5P_PA_SDRAM			S5PV210_PA_SDRAM
+#define S5P_PA_SROMC			S5PV210_PA_SROMC
+#define S5P_PA_SYSCON			S5PV210_PA_SYSCON
+#define S5P_PA_TIMER			S5PV210_PA_TIMER
 
-#define S5PV210_PA_ADC		(0xE1700000)
+#define SAMSUNG_PA_ADC			S5PV210_PA_ADC
+#define SAMSUNG_PA_CFCON		S5PV210_PA_CFCON
+#define SAMSUNG_PA_KEYPAD		S5PV210_PA_KEYPAD
 
-#define S5PV210_PA_DMC0		(0xF0000000)
-#define S5PV210_PA_DMC1		(0xF1400000)
+/* UART */
 
-#define S5PV210_PA_MIPI_CSIS	0xFA600000
+#define S3C_VA_UARTx(x)			(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
 
-/* compatibiltiy defines. */
-#define S3C_PA_UART		S5PV210_PA_UART
-#define S3C_PA_HSMMC0		S5PV210_PA_HSMMC(0)
-#define S3C_PA_HSMMC1		S5PV210_PA_HSMMC(1)
-#define S3C_PA_HSMMC2		S5PV210_PA_HSMMC(2)
-#define S3C_PA_HSMMC3		S5PV210_PA_HSMMC(3)
-#define S3C_PA_IIC		S5PV210_PA_IIC0
-#define S3C_PA_IIC1		S5PV210_PA_IIC1
-#define S3C_PA_IIC2		S5PV210_PA_IIC2
-#define S3C_PA_FB		S5PV210_PA_FB
-#define S3C_PA_RTC		S5PV210_PA_RTC
-#define S3C_PA_WDT		S5PV210_PA_WATCHDOG
-#define S3C_PA_USB_HSOTG	S5PV210_PA_HSOTG
-#define S5P_PA_FIMC0		S5PV210_PA_FIMC0
-#define S5P_PA_FIMC1		S5PV210_PA_FIMC1
-#define S5P_PA_FIMC2		S5PV210_PA_FIMC2
-#define S5P_PA_MIPI_CSIS0	S5PV210_PA_MIPI_CSIS
+#define S3C_PA_UART			S5PV210_PA_UART
 
-#define SAMSUNG_PA_ADC		S5PV210_PA_ADC
-#define SAMSUNG_PA_CFCON	S5PV210_PA_CFCON
-#define SAMSUNG_PA_KEYPAD	S5PV210_PA_KEYPAD
+#define S5P_PA_UART(x)			(S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0			S5P_PA_UART(0)
+#define S5P_PA_UART1			S5P_PA_UART(1)
+#define S5P_PA_UART2			S5P_PA_UART(2)
+#define S5P_PA_UART3			S5P_PA_UART(3)
+
+#define S5P_SZ_UART			SZ_256
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 461aa035afc0..557add4fc56c 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -149,7 +149,7 @@ static struct regulator_init_data aquila_ldo2_data = {
 
 static struct regulator_init_data aquila_ldo3_data = {
 	.constraints	= {
-		.name		= "VUSB/MIPI_1.1V",
+		.name		= "VUSB+MIPI_1.1V",
 		.min_uV		= 1100000,
 		.max_uV		= 1100000,
 		.apply_uV	= 1,
@@ -197,7 +197,7 @@ static struct regulator_init_data aquila_ldo7_data = {
 
 static struct regulator_init_data aquila_ldo8_data = {
 	.constraints	= {
-		.name		= "VUSB/VADC_3.3V",
+		.name		= "VUSB+VADC_3.3V",
 		.min_uV		= 3300000,
 		.max_uV		= 3300000,
 		.apply_uV	= 1,
@@ -207,7 +207,7 @@ static struct regulator_init_data aquila_ldo8_data = {
 
 static struct regulator_init_data aquila_ldo9_data = {
 	.constraints	= {
-		.name		= "VCC/VCAM_2.8V",
+		.name		= "VCC+VCAM_2.8V",
 		.min_uV		= 2800000,
 		.max_uV		= 2800000,
 		.apply_uV	= 1,
@@ -381,9 +381,12 @@ static struct max8998_platform_data aquila_max8998_pdata = {
 	.buck1_set1	= S5PV210_GPH0(3),
 	.buck1_set2	= S5PV210_GPH0(4),
 	.buck2_set3	= S5PV210_GPH0(5),
-	.buck1_max_voltage1 = 1200000,
-	.buck1_max_voltage2 = 1200000,
-	.buck2_max_voltage = 1200000,
+	.buck1_voltage1	= 1200000,
+	.buck1_voltage2	= 1200000,
+	.buck1_voltage3	= 1200000,
+	.buck1_voltage4	= 1200000,
+	.buck2_voltage1	= 1200000,
+	.buck2_voltage2	= 1200000,
 };
 #endif
 
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index e22d5112fd44..056f5c769b0a 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -288,7 +288,7 @@ static struct regulator_init_data goni_ldo2_data = {
 
 static struct regulator_init_data goni_ldo3_data = {
 	.constraints	= {
-		.name		= "VUSB/MIPI_1.1V",
+		.name		= "VUSB+MIPI_1.1V",
 		.min_uV		= 1100000,
 		.max_uV		= 1100000,
 		.apply_uV	= 1,
@@ -337,7 +337,7 @@ static struct regulator_init_data goni_ldo7_data = {
 
 static struct regulator_init_data goni_ldo8_data = {
 	.constraints	= {
-		.name		= "VUSB/VADC_3.3V",
+		.name		= "VUSB+VADC_3.3V",
 		.min_uV		= 3300000,
 		.max_uV		= 3300000,
 		.apply_uV	= 1,
@@ -347,7 +347,7 @@ static struct regulator_init_data goni_ldo8_data = {
 
 static struct regulator_init_data goni_ldo9_data = {
 	.constraints	= {
-		.name		= "VCC/VCAM_2.8V",
+		.name		= "VCC+VCAM_2.8V",
 		.min_uV		= 2800000,
 		.max_uV		= 2800000,
 		.apply_uV	= 1,
@@ -521,9 +521,12 @@ static struct max8998_platform_data goni_max8998_pdata = {
 	.buck1_set1	= S5PV210_GPH0(3),
 	.buck1_set2	= S5PV210_GPH0(4),
 	.buck2_set3	= S5PV210_GPH0(5),
-	.buck1_max_voltage1 = 1200000,
-	.buck1_max_voltage2 = 1200000,
-	.buck2_max_voltage = 1200000,
+	.buck1_voltage1	= 1200000,
+	.buck1_voltage2	= 1200000,
+	.buck1_voltage3	= 1200000,
+	.buck1_voltage4	= 1200000,
+	.buck2_voltage1	= 1200000,
+	.buck2_voltage2	= 1200000,
 };
 #endif
 
diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h
index 3060f78e12ab..901657fa7a12 100644
--- a/arch/arm/mach-s5pv310/include/mach/map.h
+++ b/arch/arm/mach-s5pv310/include/mach/map.h
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s5pv310/include/mach/map.h
  *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
  * S5PV310 - Memory map definitions
@@ -23,90 +23,43 @@
 
 #include <plat/map-s5p.h>
 
-#define S5PV310_PA_SYSRAM		(0x02025000)
+#define S5PV310_PA_SYSRAM		0x02025000
 
-#define S5PV310_PA_SROM_BANK(x)		(0x04000000 + ((x) * 0x01000000))
-
-#define S5PC210_PA_ONENAND		(0x0C000000)
-#define S5P_PA_ONENAND			S5PC210_PA_ONENAND
-
-#define S5PC210_PA_ONENAND_DMA		(0x0C600000)
-#define S5P_PA_ONENAND_DMA		S5PC210_PA_ONENAND_DMA
-
-#define S5PV310_PA_CHIPID		(0x10000000)
-#define S5P_PA_CHIPID			S5PV310_PA_CHIPID
-
-#define S5PV310_PA_SYSCON		(0x10010000)
-#define S5P_PA_SYSCON			S5PV310_PA_SYSCON
+#define S5PV310_PA_I2S0			0x03830000
+#define S5PV310_PA_I2S1			0xE3100000
+#define S5PV310_PA_I2S2			0xE2A00000
 
-#define S5PV310_PA_PMU			(0x10020000)
+#define S5PV310_PA_PCM0			0x03840000
+#define S5PV310_PA_PCM1			0x13980000
+#define S5PV310_PA_PCM2			0x13990000
 
-#define S5PV310_PA_CMU			(0x10030000)
-
-#define S5PV310_PA_WATCHDOG		(0x10060000)
-#define S5PV310_PA_RTC			(0x10070000)
-
-#define S5PV310_PA_DMC0			(0x10400000)
-
-#define S5PV310_PA_COMBINER		(0x10448000)
-
-#define S5PV310_PA_COREPERI		(0x10500000)
-#define S5PV310_PA_GIC_CPU		(0x10500100)
-#define S5PV310_PA_TWD			(0x10500600)
-#define S5PV310_PA_GIC_DIST		(0x10501000)
-#define S5PV310_PA_L2CC			(0x10502000)
-
-/* DMA */
-#define S5PV310_PA_MDMA		0x10810000
-#define S5PV310_PA_PDMA0	0x12680000
-#define S5PV310_PA_PDMA1	0x12690000
-
-#define S5PV310_PA_GPIO1		(0x11400000)
-#define S5PV310_PA_GPIO2		(0x11000000)
-#define S5PV310_PA_GPIO3		(0x03860000)
-
-#define S5PV310_PA_MIPI_CSIS0		0x11880000
-#define S5PV310_PA_MIPI_CSIS1		0x11890000
+#define S5PV310_PA_SROM_BANK(x)		(0x04000000 + ((x) * 0x01000000))
 
-#define S5PV310_PA_HSMMC(x)		(0x12510000 + ((x) * 0x10000))
+#define S5PC210_PA_ONENAND		0x0C000000
+#define S5PC210_PA_ONENAND_DMA		0x0C600000
 
-#define S5PV310_PA_SROMC		(0x12570000)
-#define S5P_PA_SROMC			S5PV310_PA_SROMC
+#define S5PV310_PA_CHIPID		0x10000000
 
-/* S/PDIF */
-#define S5PV310_PA_SPDIF	0xE1100000
+#define S5PV310_PA_SYSCON		0x10010000
+#define S5PV310_PA_PMU			0x10020000
+#define S5PV310_PA_CMU			0x10030000
 
-/* I2S */
-#define S5PV310_PA_I2S0		0x03830000
-#define S5PV310_PA_I2S1		0xE3100000
-#define S5PV310_PA_I2S2		0xE2A00000
+#define S5PV310_PA_WATCHDOG		0x10060000
+#define S5PV310_PA_RTC			0x10070000
 
-/* PCM */
-#define S5PV310_PA_PCM0		0x03840000
-#define S5PV310_PA_PCM1		0x13980000
-#define S5PV310_PA_PCM2		0x13990000
+#define S5PV310_PA_DMC0			0x10400000
 
-/* AC97 */
-#define S5PV310_PA_AC97		0x139A0000
+#define S5PV310_PA_COMBINER		0x10448000
 
-#define S5PV310_PA_UART			(0x13800000)
+#define S5PV310_PA_COREPERI		0x10500000
+#define S5PV310_PA_GIC_CPU		0x10500100
+#define S5PV310_PA_TWD			0x10500600
+#define S5PV310_PA_GIC_DIST		0x10501000
+#define S5PV310_PA_L2CC			0x10502000
 
-#define S5P_PA_UART(x)			(S5PV310_PA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART0			S5P_PA_UART(0)
-#define S5P_PA_UART1			S5P_PA_UART(1)
-#define S5P_PA_UART2			S5P_PA_UART(2)
-#define S5P_PA_UART3			S5P_PA_UART(3)
-#define S5P_PA_UART4			S5P_PA_UART(4)
-
-#define S5P_SZ_UART			SZ_256
-
-#define S5PV310_PA_IIC(x)		(0x13860000 + ((x) * 0x10000))
-
-#define S5PV310_PA_TIMER		(0x139D0000)
-#define S5P_PA_TIMER			S5PV310_PA_TIMER
-
-#define S5PV310_PA_SDRAM		(0x40000000)
-#define S5P_PA_SDRAM			S5PV310_PA_SDRAM
+#define S5PV310_PA_MDMA			0x10810000
+#define S5PV310_PA_PDMA0		0x12680000
+#define S5PV310_PA_PDMA1		0x12690000
 
 #define S5PV310_PA_SYSMMU_MDMA		0x10A40000
 #define S5PV310_PA_SYSMMU_SSS		0x10A50000
@@ -125,8 +78,31 @@
 #define S5PV310_PA_SYSMMU_MFC_L		0x13620000
 #define S5PV310_PA_SYSMMU_MFC_R		0x13630000
 
-/* compatibiltiy defines. */
-#define S3C_PA_UART			S5PV310_PA_UART
+#define S5PV310_PA_GPIO1		0x11400000
+#define S5PV310_PA_GPIO2		0x11000000
+#define S5PV310_PA_GPIO3		0x03860000
+
+#define S5PV310_PA_MIPI_CSIS0		0x11880000
+#define S5PV310_PA_MIPI_CSIS1		0x11890000
+
+#define S5PV310_PA_HSMMC(x)		(0x12510000 + ((x) * 0x10000))
+
+#define S5PV310_PA_SROMC		0x12570000
+
+#define S5PV310_PA_UART			0x13800000
+
+#define S5PV310_PA_IIC(x)		(0x13860000 + ((x) * 0x10000))
+
+#define S5PV310_PA_AC97			0x139A0000
+
+#define S5PV310_PA_TIMER		0x139D0000
+
+#define S5PV310_PA_SDRAM		0x40000000
+
+#define S5PV310_PA_SPDIF		0xE1100000
+
+/* Compatibiltiy Defines */
+
 #define S3C_PA_HSMMC0			S5PV310_PA_HSMMC(0)
 #define S3C_PA_HSMMC1			S5PV310_PA_HSMMC(1)
 #define S3C_PA_HSMMC2			S5PV310_PA_HSMMC(2)
@@ -141,7 +117,28 @@
 #define S3C_PA_IIC7			S5PV310_PA_IIC(7)
 #define S3C_PA_RTC			S5PV310_PA_RTC
 #define S3C_PA_WDT			S5PV310_PA_WATCHDOG
+
+#define S5P_PA_CHIPID			S5PV310_PA_CHIPID
 #define S5P_PA_MIPI_CSIS0		S5PV310_PA_MIPI_CSIS0
 #define S5P_PA_MIPI_CSIS1		S5PV310_PA_MIPI_CSIS1
+#define S5P_PA_ONENAND			S5PC210_PA_ONENAND
+#define S5P_PA_ONENAND_DMA		S5PC210_PA_ONENAND_DMA
+#define S5P_PA_SDRAM			S5PV310_PA_SDRAM
+#define S5P_PA_SROMC			S5PV310_PA_SROMC
+#define S5P_PA_SYSCON			S5PV310_PA_SYSCON
+#define S5P_PA_TIMER			S5PV310_PA_TIMER
+
+/* UART */
+
+#define S3C_PA_UART			S5PV310_PA_UART
+
+#define S5P_PA_UART(x)			(S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0			S5P_PA_UART(0)
+#define S5P_PA_UART1			S5P_PA_UART(1)
+#define S5P_PA_UART2			S5P_PA_UART(2)
+#define S5P_PA_UART3			S5P_PA_UART(3)
+#define S5P_PA_UART4			S5P_PA_UART(4)
+
+#define S5P_SZ_UART			SZ_256
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c
index 6a7342886171..afaf87fdb93e 100644
--- a/arch/arm/plat-s5p/dev-uart.c
+++ b/arch/arm/plat-s5p/dev-uart.c
@@ -28,7 +28,7 @@
 static struct resource s5p_uart0_resource[] = {
 	[0] = {
 		.start	= S5P_PA_UART0,
-		.end	= S5P_PA_UART0 + S5P_SZ_UART,
+		.end	= S5P_PA_UART0 + S5P_SZ_UART - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -51,7 +51,7 @@ static struct resource s5p_uart0_resource[] = {
 static struct resource s5p_uart1_resource[] = {
 	[0] = {
 		.start	= S5P_PA_UART1,
-		.end	= S5P_PA_UART1 + S5P_SZ_UART,
+		.end	= S5P_PA_UART1 + S5P_SZ_UART - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -74,7 +74,7 @@ static struct resource s5p_uart1_resource[] = {
 static struct resource s5p_uart2_resource[] = {
 	[0] = {
 		.start	= S5P_PA_UART2,
-		.end	= S5P_PA_UART2 + S5P_SZ_UART,
+		.end	= S5P_PA_UART2 + S5P_SZ_UART - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -98,7 +98,7 @@ static struct resource s5p_uart3_resource[] = {
 #if CONFIG_SERIAL_SAMSUNG_UARTS > 3
 	[0] = {
 		.start	= S5P_PA_UART3,
-		.end	= S5P_PA_UART3 + S5P_SZ_UART,
+		.end	= S5P_PA_UART3 + S5P_SZ_UART - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -123,7 +123,7 @@ static struct resource s5p_uart4_resource[] = {
 #if CONFIG_SERIAL_SAMSUNG_UARTS > 4
 	[0] = {
 		.start	= S5P_PA_UART4,
-		.end	= S5P_PA_UART4 + S5P_SZ_UART,
+		.end	= S5P_PA_UART4 + S5P_SZ_UART - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -148,7 +148,7 @@ static struct resource s5p_uart5_resource[] = {
 #if CONFIG_SERIAL_SAMSUNG_UARTS > 5
 	[0] = {
 		.start	= S5P_PA_UART5,
-		.end	= S5P_PA_UART5 + S5P_SZ_UART,
+		.end	= S5P_PA_UART5 + S5P_SZ_UART - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
diff --git a/arch/arm/plat-samsung/dev-ts.c b/arch/arm/plat-samsung/dev-ts.c
index 236ef8427d7d..3e4bd8147bf4 100644
--- a/arch/arm/plat-samsung/dev-ts.c
+++ b/arch/arm/plat-samsung/dev-ts.c
@@ -58,4 +58,3 @@ void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
 
 	s3c_device_ts.dev.platform_data = npd;
 }
-EXPORT_SYMBOL(s3c24xx_ts_set_platdata);
diff --git a/arch/s390/boot/compressed/misc.c b/arch/s390/boot/compressed/misc.c
index 0851eb1e919e..2751b3a8a66f 100644
--- a/arch/s390/boot/compressed/misc.c
+++ b/arch/s390/boot/compressed/misc.c
@@ -133,11 +133,12 @@ unsigned long decompress_kernel(void)
 	unsigned long output_addr;
 	unsigned char *output;
 
-	check_ipl_parmblock((void *) 0, (unsigned long) output + SZ__bss_start);
+	output_addr = ((unsigned long) &_end + HEAP_SIZE + 4095UL) & -4096UL;
+	check_ipl_parmblock((void *) 0, output_addr + SZ__bss_start);
 	memset(&_bss, 0, &_ebss - &_bss);
 	free_mem_ptr = (unsigned long)&_end;
 	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
-	output = (unsigned char *) ((free_mem_end_ptr + 4095UL) & -4096UL);
+	output = (unsigned char *) output_addr;
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	/*
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index 76daea117181..5c5ba10384c2 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -36,14 +36,19 @@
 
 static inline int atomic_read(const atomic_t *v)
 {
-	barrier();
-	return v->counter;
+	int c;
+
+	asm volatile(
+		"	l	%0,%1\n"
+		: "=d" (c) : "Q" (v->counter));
+	return c;
 }
 
 static inline void atomic_set(atomic_t *v, int i)
 {
-	v->counter = i;
-	barrier();
+	asm volatile(
+		"	st	%1,%0\n"
+		: "=Q" (v->counter) : "d" (i));
 }
 
 static inline int atomic_add_return(int i, atomic_t *v)
@@ -128,14 +133,19 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 
 static inline long long atomic64_read(const atomic64_t *v)
 {
-	barrier();
-	return v->counter;
+	long long c;
+
+	asm volatile(
+		"	lg	%0,%1\n"
+		: "=d" (c) : "Q" (v->counter));
+	return c;
 }
 
 static inline void atomic64_set(atomic64_t *v, long long i)
 {
-	v->counter = i;
-	barrier();
+	asm volatile(
+		"	stg	%1,%0\n"
+		: "=Q" (v->counter) : "d" (i));
 }
 
 static inline long long atomic64_add_return(long long i, atomic64_t *v)
diff --git a/arch/s390/include/asm/cache.h b/arch/s390/include/asm/cache.h
index 24aafa68b643..2a30d5ac0667 100644
--- a/arch/s390/include/asm/cache.h
+++ b/arch/s390/include/asm/cache.h
@@ -13,6 +13,7 @@
 
 #define L1_CACHE_BYTES     256
 #define L1_CACHE_SHIFT     8
+#define NET_SKB_PAD	   32
 
 #define __read_mostly __attribute__((__section__(".data..read_mostly")))
 
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index faf5a2c65926..36e0fa161c2b 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -577,11 +577,9 @@ duration:
 	if (rc)
 		return;
 
-	if (be32_to_cpu(tpm_cmd.header.out.return_code) != 0 ||
-	    be32_to_cpu(tpm_cmd.header.out.length)
-	    != sizeof(tpm_cmd.header.out) + sizeof(u32) + 3 * sizeof(u32))
+	if (be32_to_cpu(tpm_cmd.header.out.return_code)
+	    != 3 * sizeof(u32))
 		return;
-
 	duration_cap = &tpm_cmd.params.getcap_out.cap.duration;
 	chip->vendor.duration[TPM_SHORT] =
 	    usecs_to_jiffies(be32_to_cpu(duration_cap->tpm_short));
@@ -941,18 +939,6 @@ ssize_t tpm_show_caps_1_2(struct device * dev,
 }
 EXPORT_SYMBOL_GPL(tpm_show_caps_1_2);
 
-ssize_t tpm_show_timeouts(struct device *dev, struct device_attribute *attr,
-			  char *buf)
-{
-	struct tpm_chip *chip = dev_get_drvdata(dev);
-
-	return sprintf(buf, "%d %d %d\n",
-	               jiffies_to_usecs(chip->vendor.duration[TPM_SHORT]),
-	               jiffies_to_usecs(chip->vendor.duration[TPM_MEDIUM]),
-	               jiffies_to_usecs(chip->vendor.duration[TPM_LONG]));
-}
-EXPORT_SYMBOL_GPL(tpm_show_timeouts);
-
 ssize_t tpm_store_cancel(struct device *dev, struct device_attribute *attr,
 			const char *buf, size_t count)
 {
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index d84ff772c26f..72ddb031b69a 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -56,8 +56,6 @@ extern ssize_t tpm_show_owned(struct device *, struct device_attribute *attr,
 				char *);
 extern ssize_t tpm_show_temp_deactivated(struct device *,
 					 struct device_attribute *attr, char *);
-extern ssize_t tpm_show_timeouts(struct device *,
-				 struct device_attribute *attr, char *);
 
 struct tpm_chip;
 
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 0d1d38e5f266..dd21df55689d 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -376,7 +376,6 @@ static DEVICE_ATTR(temp_deactivated, S_IRUGO, tpm_show_temp_deactivated,
 		   NULL);
 static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps_1_2, NULL);
 static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel);
-static DEVICE_ATTR(timeouts, S_IRUGO, tpm_show_timeouts, NULL);
 
 static struct attribute *tis_attrs[] = {
 	&dev_attr_pubek.attr,
@@ -386,8 +385,7 @@ static struct attribute *tis_attrs[] = {
 	&dev_attr_owned.attr,
 	&dev_attr_temp_deactivated.attr,
 	&dev_attr_caps.attr,
-	&dev_attr_cancel.attr,
-	&dev_attr_timeouts.attr, NULL,
+	&dev_attr_cancel.attr, NULL,
 };
 
 static struct attribute_group tis_attr_grp = {
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 15d94c63918c..729d4233b763 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1553,17 +1553,7 @@
 
 /* Backlight control */
 #define BLC_PWM_CTL		0x61254
-#define   BACKLIGHT_MODULATION_FREQ_SHIFT		(17)
 #define BLC_PWM_CTL2		0x61250 /* 965+ only */
-#define   BLM_COMBINATION_MODE (1 << 30)
-/*
- * This is the most significant 15 bits of the number of backlight cycles in a
- * complete cycle of the modulated backlight control.
- *
- * The actual value is this field multiplied by two.
- */
-#define   BACKLIGHT_MODULATION_FREQ_MASK		(0x7fff << 17)
-#define   BLM_LEGACY_MODE				(1 << 16)
 /*
  * This is the number of cycles out of the backlight modulation cycle for which
  * the backlight is on.
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index c65992df458d..d860abeda70f 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -30,8 +30,6 @@
 
 #include "intel_drv.h"
 
-#define PCI_LBPC 0xf4 /* legacy/combination backlight modes */
-
 void
 intel_fixed_panel_mode(struct drm_display_mode *fixed_mode,
 		       struct drm_display_mode *adjusted_mode)
@@ -112,19 +110,6 @@ done:
 	dev_priv->pch_pf_size = (width << 16) | height;
 }
 
-static int is_backlight_combination_mode(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	if (INTEL_INFO(dev)->gen >= 4)
-		return I915_READ(BLC_PWM_CTL2) & BLM_COMBINATION_MODE;
-
-	if (IS_GEN2(dev))
-		return I915_READ(BLC_PWM_CTL) & BLM_LEGACY_MODE;
-
-	return 0;
-}
-
 static u32 i915_read_blc_pwm_ctl(struct drm_i915_private *dev_priv)
 {
 	u32 val;
@@ -181,9 +166,6 @@ u32 intel_panel_get_max_backlight(struct drm_device *dev)
 			if (INTEL_INFO(dev)->gen < 4)
 				max &= ~1;
 		}
-
-		if (is_backlight_combination_mode(dev))
-			max *= 0xff;
 	}
 
 	DRM_DEBUG_DRIVER("max backlight PWM = %d\n", max);
@@ -201,15 +183,6 @@ u32 intel_panel_get_backlight(struct drm_device *dev)
 		val = I915_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
 		if (IS_PINEVIEW(dev))
 			val >>= 1;
-
-		if (is_backlight_combination_mode(dev)){
-			u8 lbpc;
-
-			val &= ~1;
-			pci_read_config_byte(dev->pdev, PCI_LBPC, &lbpc);
-			val *= lbpc;
-			val >>= 1;
-		}
 	}
 
 	DRM_DEBUG_DRIVER("get backlight PWM = %d\n", val);
@@ -232,16 +205,6 @@ void intel_panel_set_backlight(struct drm_device *dev, u32 level)
 
 	if (HAS_PCH_SPLIT(dev))
 		return intel_pch_panel_set_backlight(dev, level);
-
-	if (is_backlight_combination_mode(dev)){
-		u32 max = intel_panel_get_max_backlight(dev);
-		u8 lpbc;
-
-		lpbc = level * 0xfe / max + 1;
-		level /= lpbc;
-		pci_write_config_byte(dev->pdev, PCI_LBPC, lpbc);
-	}
-
 	tmp = I915_READ(BLC_PWM_CTL);
 	if (IS_PINEVIEW(dev)) {
 		tmp &= ~(BACKLIGHT_DUTY_CYCLE_MASK - 1);
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 773e484f1646..297bc9a7d6e6 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -238,13 +238,13 @@ config SENSORS_K8TEMP
 	  will be called k8temp.
 
 config SENSORS_K10TEMP
-	tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor"
+	tristate "AMD Family 10h/11h/12h/14h temperature sensor"
 	depends on X86 && PCI
 	help
 	  If you say yes here you get support for the temperature
 	  sensor(s) inside your CPU. Supported are later revisions of
-	  the AMD Family 10h and all revisions of the AMD Family 11h
-	  microarchitectures.
+	  the AMD Family 10h and all revisions of the AMD Family 11h,
+	  12h (Llano), and 14h (Brazos) microarchitectures.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called k10temp.
@@ -455,13 +455,14 @@ config SENSORS_JZ4740
 	  called jz4740-hwmon.
 
 config SENSORS_JC42
-	tristate "JEDEC JC42.4 compliant temperature sensors"
+	tristate "JEDEC JC42.4 compliant memory module temperature sensors"
 	depends on I2C
 	help
-	  If you say yes here you get support for Jedec JC42.4 compliant
-	  temperature sensors. Support will include, but not be limited to,
-	  ADT7408, CAT34TS02,, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
-	  MCP9843, SE97, SE98, STTS424, TSE2002B3, and TS3000B3.
+	  If you say yes here, you get support for JEDEC JC42.4 compliant
+	  temperature sensors, which are used on many DDR3 memory modules for
+	  mobile devices and servers.  Support will include, but not be limited
+	  to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
+	  MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called jc42.
@@ -574,7 +575,7 @@ config SENSORS_LM85
 	help
 	  If you say yes here you get support for National Semiconductor LM85
 	  sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
-	  EMC6D101 and EMC6D102.
+	  EMC6D101, EMC6D102, and EMC6D103.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm85.
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 340fc78c8dde..934991237061 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -53,6 +53,8 @@ static const unsigned short normal_i2c[] = {
 
 /* Configuration register defines */
 #define JC42_CFG_CRIT_ONLY	(1 << 2)
+#define JC42_CFG_TCRIT_LOCK	(1 << 6)
+#define JC42_CFG_EVENT_LOCK	(1 << 7)
 #define JC42_CFG_SHUTDOWN	(1 << 8)
 #define JC42_CFG_HYST_SHIFT	9
 #define JC42_CFG_HYST_MASK	0x03
@@ -332,7 +334,7 @@ static ssize_t set_temp_crit_hyst(struct device *dev,
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct jc42_data *data = i2c_get_clientdata(client);
-	long val;
+	unsigned long val;
 	int diff, hyst;
 	int err;
 	int ret = count;
@@ -380,14 +382,14 @@ static ssize_t show_alarm(struct device *dev,
 
 static DEVICE_ATTR(temp1_input, S_IRUGO,
 		   show_temp_input, NULL);
-static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_crit, S_IRUGO,
 		   show_temp_crit, set_temp_crit);
-static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_min, S_IRUGO,
 		   show_temp_min, set_temp_min);
-static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_max, S_IRUGO,
 		   show_temp_max, set_temp_max);
 
-static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_crit_hyst, S_IRUGO,
 		   show_temp_crit_hyst, set_temp_crit_hyst);
 static DEVICE_ATTR(temp1_max_hyst, S_IRUGO,
 		   show_temp_max_hyst, NULL);
@@ -412,8 +414,31 @@ static struct attribute *jc42_attributes[] = {
 	NULL
 };
 
+static mode_t jc42_attribute_mode(struct kobject *kobj,
+				  struct attribute *attr, int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct jc42_data *data = i2c_get_clientdata(client);
+	unsigned int config = data->config;
+	bool readonly;
+
+	if (attr == &dev_attr_temp1_crit.attr)
+		readonly = config & JC42_CFG_TCRIT_LOCK;
+	else if (attr == &dev_attr_temp1_min.attr ||
+		 attr == &dev_attr_temp1_max.attr)
+		readonly = config & JC42_CFG_EVENT_LOCK;
+	else if (attr == &dev_attr_temp1_crit_hyst.attr)
+		readonly = config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK);
+	else
+		readonly = true;
+
+	return S_IRUGO | (readonly ? 0 : S_IWUSR);
+}
+
 static const struct attribute_group jc42_group = {
 	.attrs = jc42_attributes,
+	.is_visible = jc42_attribute_mode,
 };
 
 /* Return 0 if detection is successful, -ENODEV otherwise */
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index da5a2404cd3e..82bf65aa2968 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -1,5 +1,5 @@
 /*
- * k10temp.c - AMD Family 10h/11h processor hardware monitoring
+ * k10temp.c - AMD Family 10h/11h/12h/14h processor hardware monitoring
  *
  * Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
  *
@@ -25,7 +25,7 @@
 #include <linux/pci.h>
 #include <asm/processor.h>
 
-MODULE_DESCRIPTION("AMD Family 10h/11h CPU core temperature monitor");
+MODULE_DESCRIPTION("AMD Family 10h/11h/12h/14h CPU core temperature monitor");
 MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
 MODULE_LICENSE("GPL");
 
@@ -208,6 +208,7 @@ static void __devexit k10temp_remove(struct pci_dev *pdev)
 static const struct pci_device_id k10temp_id_table[] = {
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
 	{}
 };
 MODULE_DEVICE_TABLE(pci, k10temp_id_table);
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 1e229847f37a..d2cc28660816 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -41,7 +41,7 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 enum chips {
 	any_chip, lm85b, lm85c,
 	adm1027, adt7463, adt7468,
-	emc6d100, emc6d102
+	emc6d100, emc6d102, emc6d103
 };
 
 /* The LM85 registers */
@@ -90,6 +90,9 @@ enum chips {
 #define	LM85_VERSTEP_EMC6D100_A0        0x60
 #define	LM85_VERSTEP_EMC6D100_A1        0x61
 #define	LM85_VERSTEP_EMC6D102		0x65
+#define	LM85_VERSTEP_EMC6D103_A0	0x68
+#define	LM85_VERSTEP_EMC6D103_A1	0x69
+#define	LM85_VERSTEP_EMC6D103S		0x6A	/* Also known as EMC6D103:A2 */
 
 #define	LM85_REG_CONFIG			0x40
 
@@ -348,6 +351,7 @@ static const struct i2c_device_id lm85_id[] = {
 	{ "emc6d100", emc6d100 },
 	{ "emc6d101", emc6d100 },
 	{ "emc6d102", emc6d102 },
+	{ "emc6d103", emc6d103 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, lm85_id);
@@ -1250,6 +1254,20 @@ static int lm85_detect(struct i2c_client *client, struct i2c_board_info *info)
 		case LM85_VERSTEP_EMC6D102:
 			type_name = "emc6d102";
 			break;
+		case LM85_VERSTEP_EMC6D103_A0:
+		case LM85_VERSTEP_EMC6D103_A1:
+			type_name = "emc6d103";
+			break;
+		/*
+		 * Registers apparently missing in EMC6D103S/EMC6D103:A2
+		 * compared to EMC6D103:A0, EMC6D103:A1, and EMC6D102
+		 * (according to the data sheets), but used unconditionally
+		 * in the driver: 62[5:7], 6D[0:7], and 6E[0:7].
+		 * So skip EMC6D103S for now.
+		case LM85_VERSTEP_EMC6D103S:
+			type_name = "emc6d103s";
+			break;
+		 */
 		}
 	} else {
 		dev_dbg(&adapter->dev,
@@ -1283,6 +1301,7 @@ static int lm85_probe(struct i2c_client *client,
 	case adt7468:
 	case emc6d100:
 	case emc6d102:
+	case emc6d103:
 		data->freq_map = adm1027_freq_map;
 		break;
 	default:
@@ -1468,7 +1487,7 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 			/* More alarm bits */
 			data->alarms |= lm85_read_value(client,
 						EMC6D100_REG_ALARM3) << 16;
-		} else if (data->type == emc6d102) {
+		} else if (data->type == emc6d102 || data->type == emc6d103) {
 			/* Have to read LSB bits after the MSB ones because
 			   the reading of the MSB bits has frozen the
 			   LSBs (backward from the ADM1027).
diff --git a/drivers/pcmcia/pxa2xx_colibri.c b/drivers/pcmcia/pxa2xx_colibri.c
index c3f72192af66..a52039564e74 100644
--- a/drivers/pcmcia/pxa2xx_colibri.c
+++ b/drivers/pcmcia/pxa2xx_colibri.c
@@ -181,6 +181,9 @@ static int __init colibri_pcmcia_init(void)
 {
 	int ret;
 
+	if (!machine_is_colibri() && !machine_is_colibri320())
+		return -ENODEV;
+
 	colibri_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
 	if (!colibri_pcmcia_device)
 		return -ENOMEM;
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index d163bc2e2b9e..a59af5b24f0a 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -227,7 +227,7 @@ config SONYPI_COMPAT
 config IDEAPAD_LAPTOP
 	tristate "Lenovo IdeaPad Laptop Extras"
 	depends on ACPI
-	depends on RFKILL
+	depends on RFKILL && INPUT
 	select INPUT_SPARSEKMAP
 	help
 	  This is a driver for the rfkill switches on Lenovo IdeaPad netbooks.
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index c5c4b8c32eb8..38b34a73866a 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -84,7 +84,7 @@ MODULE_LICENSE("GPL");
  */
 #define AMW0_GUID1		"67C3371D-95A3-4C37-BB61-DD47B491DAAB"
 #define AMW0_GUID2		"431F16ED-0C2B-444C-B267-27DEB140CF9C"
-#define WMID_GUID1		"6AF4F258-B401-42fd-BE91-3D4AC2D7C0D3"
+#define WMID_GUID1		"6AF4F258-B401-42FD-BE91-3D4AC2D7C0D3"
 #define WMID_GUID2		"95764E09-FB56-4e83-B31A-37761F60994A"
 #define WMID_GUID3		"61EF69EA-865C-4BC3-A502-A0DEBA0CB531"
 
@@ -1280,7 +1280,7 @@ static ssize_t set_bool_threeg(struct device *dev,
 			return -EINVAL;
 	return count;
 }
-static DEVICE_ATTR(threeg, S_IWUGO | S_IRUGO | S_IWUSR, show_bool_threeg,
+static DEVICE_ATTR(threeg, S_IRUGO | S_IWUSR, show_bool_threeg,
 	set_bool_threeg);
 
 static ssize_t show_interface(struct device *dev, struct device_attribute *attr,
diff --git a/drivers/platform/x86/asus_acpi.c b/drivers/platform/x86/asus_acpi.c
index 4633fd8532cc..fe495939c307 100644
--- a/drivers/platform/x86/asus_acpi.c
+++ b/drivers/platform/x86/asus_acpi.c
@@ -1081,14 +1081,8 @@ static int asus_hotk_add_fs(struct acpi_device *device)
 	struct proc_dir_entry *proc;
 	mode_t mode;
 
-	/*
-	 * If parameter uid or gid is not changed, keep the default setting for
-	 * our proc entries (-rw-rw-rw-) else, it means we care about security,
-	 * and then set to -rw-rw----
-	 */
-
 	if ((asus_uid == 0) && (asus_gid == 0)) {
-		mode = S_IFREG | S_IRUGO | S_IWUGO;
+		mode = S_IFREG | S_IRUGO | S_IWUSR | S_IWGRP;
 	} else {
 		mode = S_IFREG | S_IRUSR | S_IRGRP | S_IWUSR | S_IWGRP;
 		printk(KERN_WARNING "  asus_uid and asus_gid parameters are "
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index 34657f96b5a5..ad24ef36f9f7 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -290,9 +290,12 @@ static int dell_rfkill_set(void *data, bool blocked)
 	dell_send_request(buffer, 17, 11);
 
 	/* If the hardware switch controls this radio, and the hardware
-	   switch is disabled, don't allow changing the software state */
+	   switch is disabled, don't allow changing the software state.
+	   If the hardware switch is reported as not supported, always
+	   fire the SMI to toggle the killswitch. */
 	if ((hwswitch_state & BIT(hwswitch_bit)) &&
-	    !(buffer->output[1] & BIT(16))) {
+	    !(buffer->output[1] & BIT(16)) &&
+	    (buffer->output[1] & BIT(0))) {
 		ret = -EINVAL;
 		goto out;
 	}
@@ -398,6 +401,23 @@ static const struct file_operations dell_debugfs_fops = {
 
 static void dell_update_rfkill(struct work_struct *ignored)
 {
+	int status;
+
+	get_buffer();
+	dell_send_request(buffer, 17, 11);
+	status = buffer->output[1];
+	release_buffer();
+
+	/* if hardware rfkill is not supported, set it explicitly */
+	if (!(status & BIT(0))) {
+		if (wifi_rfkill)
+			dell_rfkill_set((void *)1, !((status & BIT(17)) >> 17));
+		if (bluetooth_rfkill)
+			dell_rfkill_set((void *)2, !((status & BIT(18)) >> 18));
+		if (wwan_rfkill)
+			dell_rfkill_set((void *)3, !((status & BIT(19)) >> 19));
+	}
+
 	if (wifi_rfkill)
 		dell_rfkill_query(wifi_rfkill, (void *)1);
 	if (bluetooth_rfkill)
diff --git a/drivers/platform/x86/intel_pmic_gpio.c b/drivers/platform/x86/intel_pmic_gpio.c
index 930e62762365..61433d492862 100644
--- a/drivers/platform/x86/intel_pmic_gpio.c
+++ b/drivers/platform/x86/intel_pmic_gpio.c
@@ -60,69 +60,20 @@ enum pmic_gpio_register {
 #define GPOSW_DOU 0x08
 #define GPOSW_RDRV 0x30
 
+#define GPIO_UPDATE_TYPE	0x80000000
 
 #define NUM_GPIO 24
 
-struct pmic_gpio_irq {
-	spinlock_t lock;
-	u32 trigger[NUM_GPIO];
-	u32 dirty;
-	struct work_struct work;
-};
-
-
 struct pmic_gpio {
+	struct mutex		buslock;
 	struct gpio_chip	chip;
-	struct pmic_gpio_irq	irqtypes;
 	void			*gpiointr;
 	int			irq;
 	unsigned		irq_base;
+	unsigned int		update_type;
+	u32			trigger_type;
 };
 
-static void pmic_program_irqtype(int gpio, int type)
-{
-	if (type & IRQ_TYPE_EDGE_RISING)
-		intel_scu_ipc_update_register(GPIO0 + gpio, 0x20, 0x20);
-	else
-		intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x20);
-
-	if (type & IRQ_TYPE_EDGE_FALLING)
-		intel_scu_ipc_update_register(GPIO0 + gpio, 0x10, 0x10);
-	else
-		intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x10);
-};
-
-static void pmic_irqtype_work(struct work_struct *work)
-{
-	struct pmic_gpio_irq *t =
-		container_of(work, struct pmic_gpio_irq, work);
-	unsigned long flags;
-	int i;
-	u16 type;
-
-	spin_lock_irqsave(&t->lock, flags);
-	/* As we drop the lock, we may need multiple scans if we race the
-	   pmic_irq_type function */
-	while (t->dirty) {
-		/*
-		 *	For each pin that has the dirty bit set send an IPC
-		 *	message to configure the hardware via the PMIC
-		 */
-		for (i = 0; i < NUM_GPIO; i++) {
-			if (!(t->dirty & (1 << i)))
-				continue;
-			t->dirty &= ~(1 << i);
-			/* We can't trust the array entry or dirty
-			   once the lock is dropped */
-			type = t->trigger[i];
-			spin_unlock_irqrestore(&t->lock, flags);
-			pmic_program_irqtype(i, type);
-			spin_lock_irqsave(&t->lock, flags);
-		}
-	}
-	spin_unlock_irqrestore(&t->lock, flags);
-}
-
 static int pmic_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
 	if (offset > 8) {
@@ -190,25 +141,24 @@ static void pmic_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 			1 << (offset - 16));
 }
 
-static int pmic_irq_type(unsigned irq, unsigned type)
+/*
+ * This is called from genirq with pg->buslock locked and
+ * irq_desc->lock held. We can not access the scu bus here, so we
+ * store the change and update in the bus_sync_unlock() function below
+ */
+static int pmic_irq_type(struct irq_data *data, unsigned type)
 {
-	struct pmic_gpio *pg = get_irq_chip_data(irq);
-	u32 gpio = irq - pg->irq_base;
-	unsigned long flags;
+	struct pmic_gpio *pg = irq_data_get_irq_chip_data(data);
+	u32 gpio = data->irq - pg->irq_base;
 
 	if (gpio >= pg->chip.ngpio)
 		return -EINVAL;
 
-	spin_lock_irqsave(&pg->irqtypes.lock, flags);
-	pg->irqtypes.trigger[gpio] = type;
-	pg->irqtypes.dirty |=  (1 << gpio);
-	spin_unlock_irqrestore(&pg->irqtypes.lock, flags);
-	schedule_work(&pg->irqtypes.work);
+	pg->trigger_type = type;
+	pg->update_type = gpio | GPIO_UPDATE_TYPE;
 	return 0;
 }
 
-
-
 static int pmic_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 {
 	struct pmic_gpio *pg = container_of(chip, struct pmic_gpio, chip);
@@ -217,38 +167,32 @@ static int pmic_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 }
 
 /* the gpiointr register is read-clear, so just do nothing. */
-static void pmic_irq_unmask(unsigned irq)
-{
-};
+static void pmic_irq_unmask(struct irq_data *data) { }
 
-static void pmic_irq_mask(unsigned irq)
-{
-};
+static void pmic_irq_mask(struct irq_data *data) { }
 
 static struct irq_chip pmic_irqchip = {
 	.name		= "PMIC-GPIO",
-	.mask		= pmic_irq_mask,
-	.unmask		= pmic_irq_unmask,
-	.set_type	= pmic_irq_type,
+	.irq_mask	= pmic_irq_mask,
+	.irq_unmask	= pmic_irq_unmask,
+	.irq_set_type	= pmic_irq_type,
 };
 
-static void pmic_irq_handler(unsigned irq, struct irq_desc *desc)
+static irqreturn_t pmic_irq_handler(int irq, void *data)
 {
-	struct pmic_gpio *pg = (struct pmic_gpio *)get_irq_data(irq);
+	struct pmic_gpio *pg = data;
 	u8 intsts = *((u8 *)pg->gpiointr + 4);
 	int gpio;
+	irqreturn_t ret = IRQ_NONE;
 
 	for (gpio = 0; gpio < 8; gpio++) {
 		if (intsts & (1 << gpio)) {
 			pr_debug("pmic pin %d triggered\n", gpio);
 			generic_handle_irq(pg->irq_base + gpio);
+			ret = IRQ_HANDLED;
 		}
 	}
-
-	if (desc->chip->irq_eoi)
-		desc->chip->irq_eoi(irq_get_irq_data(irq));
-	else
-		dev_warn(pg->chip.dev, "missing EOI handler for irq %d\n", irq);
+	return ret;
 }
 
 static int __devinit platform_pmic_gpio_probe(struct platform_device *pdev)
@@ -297,8 +241,7 @@ static int __devinit platform_pmic_gpio_probe(struct platform_device *pdev)
 	pg->chip.can_sleep = 1;
 	pg->chip.dev = dev;
 
-	INIT_WORK(&pg->irqtypes.work, pmic_irqtype_work);
-	spin_lock_init(&pg->irqtypes.lock);
+	mutex_init(&pg->buslock);
 
 	pg->chip.dev = dev;
 	retval = gpiochip_add(&pg->chip);
@@ -306,8 +249,13 @@ static int __devinit platform_pmic_gpio_probe(struct platform_device *pdev)
 		printk(KERN_ERR "%s: Can not add pmic gpio chip.\n", __func__);
 		goto err;
 	}
-	set_irq_data(pg->irq, pg);
-	set_irq_chained_handler(pg->irq, pmic_irq_handler);
+
+	retval = request_irq(pg->irq, pmic_irq_handler, 0, "pmic", pg);
+	if (retval) {
+		printk(KERN_WARNING "pmic: Interrupt request failed\n");
+		goto err;
+	}
+
 	for (i = 0; i < 8; i++) {
 		set_irq_chip_and_handler_name(i + pg->irq_base, &pmic_irqchip,
 					handle_simple_irq, "demux");
diff --git a/drivers/platform/x86/tc1100-wmi.c b/drivers/platform/x86/tc1100-wmi.c
index 1fe0f1feff71..865ef78d6f1a 100644
--- a/drivers/platform/x86/tc1100-wmi.c
+++ b/drivers/platform/x86/tc1100-wmi.c
@@ -162,7 +162,7 @@ set_bool_##value(struct device *dev, struct device_attribute *attr, \
 			return -EINVAL; \
 	return count; \
 } \
-static DEVICE_ATTR(value, S_IWUGO | S_IRUGO | S_IWUSR, \
+static DEVICE_ATTR(value, S_IRUGO | S_IWUSR, \
 	show_bool_##value, set_bool_##value);
 
 show_set_bool(wireless, TC1100_INSTANCE_WIRELESS);
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index dd599585c6a9..eb9922385ef8 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -2275,16 +2275,12 @@ static void tpacpi_input_send_key(const unsigned int scancode)
 	if (keycode != KEY_RESERVED) {
 		mutex_lock(&tpacpi_inputdev_send_mutex);
 
+		input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN, scancode);
 		input_report_key(tpacpi_inputdev, keycode, 1);
-		if (keycode == KEY_UNKNOWN)
-			input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN,
-				    scancode);
 		input_sync(tpacpi_inputdev);
 
+		input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN, scancode);
 		input_report_key(tpacpi_inputdev, keycode, 0);
-		if (keycode == KEY_UNKNOWN)
-			input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN,
-				    scancode);
 		input_sync(tpacpi_inputdev);
 
 		mutex_unlock(&tpacpi_inputdev_send_mutex);
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 318672d05563..a9fe23d5bd0f 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -72,7 +72,7 @@ static struct dasd_discipline dasd_eckd_discipline;
 static struct ccw_device_id dasd_eckd_ids[] = {
 	{ CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3390, 0), .driver_info = 0x1},
 	{ CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3390, 0), .driver_info = 0x2},
-	{ CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3390, 0), .driver_info = 0x3},
+	{ CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3380, 0), .driver_info = 0x3},
 	{ CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3380, 0), .driver_info = 0x4},
 	{ CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3380, 0), .driver_info = 0x5},
 	{ CCW_DEVICE_DEVTYPE (0x9343, 0, 0x9345, 0), .driver_info = 0x6},
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index 0bc68de8edd7..f0aef787a102 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -60,6 +60,7 @@ int ceph_init_dentry(struct dentry *dentry)
 	}
 	di->dentry = dentry;
 	di->lease_session = NULL;
+	di->parent_inode = igrab(dentry->d_parent->d_inode);
 	dentry->d_fsdata = di;
 	dentry->d_time = jiffies;
 	ceph_dentry_lru_add(dentry);
@@ -1033,7 +1034,7 @@ static void ceph_dentry_release(struct dentry *dentry)
 	u64 snapid = CEPH_NOSNAP;
 
 	if (!IS_ROOT(dentry)) {
-		parent_inode = dentry->d_parent->d_inode;
+		parent_inode = di->parent_inode;
 		if (parent_inode)
 			snapid = ceph_snap(parent_inode);
 	}
@@ -1058,6 +1059,8 @@ static void ceph_dentry_release(struct dentry *dentry)
 		kmem_cache_free(ceph_dentry_cachep, di);
 		dentry->d_fsdata = NULL;
 	}
+	if (parent_inode)
+		iput(parent_inode);
 }
 
 static int ceph_snapdir_d_revalidate(struct dentry *dentry,
diff --git a/fs/ceph/snap.c b/fs/ceph/snap.c
index 39c243acd062..f40b9139e437 100644
--- a/fs/ceph/snap.c
+++ b/fs/ceph/snap.c
@@ -584,10 +584,14 @@ static void queue_realm_cap_snaps(struct ceph_snap_realm *realm)
 	if (lastinode)
 		iput(lastinode);
 
-	dout("queue_realm_cap_snaps %p %llx children\n", realm, realm->ino);
-	list_for_each_entry(child, &realm->children, child_item)
-		queue_realm_cap_snaps(child);
+	list_for_each_entry(child, &realm->children, child_item) {
+		dout("queue_realm_cap_snaps %p %llx queue child %p %llx\n",
+		     realm, realm->ino, child, child->ino);
+		list_del_init(&child->dirty_item);
+		list_add(&child->dirty_item, &realm->dirty_item);
+	}
 
+	list_del_init(&realm->dirty_item);
 	dout("queue_realm_cap_snaps %p %llx done\n", realm, realm->ino);
 }
 
@@ -683,7 +687,9 @@ more:
 	 * queue cap snaps _after_ we've built the new snap contexts,
 	 * so that i_head_snapc can be set appropriately.
 	 */
-	list_for_each_entry(realm, &dirty_realms, dirty_item) {
+	while (!list_empty(&dirty_realms)) {
+		realm = list_first_entry(&dirty_realms, struct ceph_snap_realm,
+					 dirty_item);
 		queue_realm_cap_snaps(realm);
 	}
 
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index 20b907d76ae2..88fcaa21b801 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -207,6 +207,7 @@ struct ceph_dentry_info {
 	struct dentry *dentry;
 	u64 time;
 	u64 offset;
+	struct inode *parent_inode;
 };
 
 struct ceph_inode_xattrs_info {
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 4a3330235d55..a9371b6578c0 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -127,5 +127,5 @@ extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
 extern const struct export_operations cifs_export_ops;
 #endif /* EXPERIMENTAL */
 
-#define CIFS_VERSION   "1.70"
+#define CIFS_VERSION   "1.71"
 #endif				/* _CIFSFS_H */
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index 8d9189f64477..79f641eeda30 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -170,7 +170,7 @@ cifs_convert_address(struct sockaddr *dst, const char *src, int len)
 {
 	int rc, alen, slen;
 	const char *pct;
-	char *endp, scope_id[13];
+	char scope_id[13];
 	struct sockaddr_in *s4 = (struct sockaddr_in *) dst;
 	struct sockaddr_in6 *s6 = (struct sockaddr_in6 *) dst;
 
@@ -197,9 +197,9 @@ cifs_convert_address(struct sockaddr *dst, const char *src, int len)
 		memcpy(scope_id, pct + 1, slen);
 		scope_id[slen] = '\0';
 
-		s6->sin6_scope_id = (u32) simple_strtoul(pct, &endp, 0);
-		if (endp != scope_id + slen)
-			return 0;
+		rc = strict_strtoul(scope_id, 0,
+					(unsigned long *)&s6->sin6_scope_id);
+		rc = (rc == 0) ? 1 : 0;
 	}
 
 	return rc;
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 1adc9625a344..16765703131b 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -656,13 +656,13 @@ ssetup_ntlmssp_authenticate:
 
 	if (type == LANMAN) {
 #ifdef CONFIG_CIFS_WEAK_PW_HASH
-		char lnm_session_key[CIFS_SESS_KEY_SIZE];
+		char lnm_session_key[CIFS_AUTH_RESP_SIZE];
 
 		pSMB->req.hdr.Flags2 &= ~SMBFLG2_UNICODE;
 
 		/* no capabilities flags in old lanman negotiation */
 
-		pSMB->old_req.PasswordLength = cpu_to_le16(CIFS_SESS_KEY_SIZE);
+		pSMB->old_req.PasswordLength = cpu_to_le16(CIFS_AUTH_RESP_SIZE);
 
 		/* Calculate hash with password and copy into bcc_ptr.
 		 * Encryption Key (stored as in cryptkey) gets used if the
@@ -675,8 +675,8 @@ ssetup_ntlmssp_authenticate:
 					true : false, lnm_session_key);
 
 		ses->flags |= CIFS_SES_LANMAN;
-		memcpy(bcc_ptr, (char *)lnm_session_key, CIFS_SESS_KEY_SIZE);
-		bcc_ptr += CIFS_SESS_KEY_SIZE;
+		memcpy(bcc_ptr, (char *)lnm_session_key, CIFS_AUTH_RESP_SIZE);
+		bcc_ptr += CIFS_AUTH_RESP_SIZE;
 
 		/* can not sign if LANMAN negotiated so no need
 		to calculate signing key? but what if server
diff --git a/fs/ecryptfs/dentry.c b/fs/ecryptfs/dentry.c
index 6fc4f319b550..534c1d46e69e 100644
--- a/fs/ecryptfs/dentry.c
+++ b/fs/ecryptfs/dentry.c
@@ -46,24 +46,28 @@ static int ecryptfs_d_revalidate(struct dentry *dentry, struct nameidata *nd)
 {
 	struct dentry *lower_dentry;
 	struct vfsmount *lower_mnt;
-	struct dentry *dentry_save;
-	struct vfsmount *vfsmount_save;
+	struct dentry *dentry_save = NULL;
+	struct vfsmount *vfsmount_save = NULL;
 	int rc = 1;
 
-	if (nd->flags & LOOKUP_RCU)
+	if (nd && nd->flags & LOOKUP_RCU)
 		return -ECHILD;
 
 	lower_dentry = ecryptfs_dentry_to_lower(dentry);
 	lower_mnt = ecryptfs_dentry_to_lower_mnt(dentry);
 	if (!lower_dentry->d_op || !lower_dentry->d_op->d_revalidate)
 		goto out;
-	dentry_save = nd->path.dentry;
-	vfsmount_save = nd->path.mnt;
-	nd->path.dentry = lower_dentry;
-	nd->path.mnt = lower_mnt;
+	if (nd) {
+		dentry_save = nd->path.dentry;
+		vfsmount_save = nd->path.mnt;
+		nd->path.dentry = lower_dentry;
+		nd->path.mnt = lower_mnt;
+	}
 	rc = lower_dentry->d_op->d_revalidate(lower_dentry, nd);
-	nd->path.dentry = dentry_save;
-	nd->path.mnt = vfsmount_save;
+	if (nd) {
+		nd->path.dentry = dentry_save;
+		nd->path.mnt = vfsmount_save;
+	}
 	if (dentry->d_inode) {
 		struct inode *lower_inode =
 			ecryptfs_inode_to_lower(dentry->d_inode);
diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index dbc84ed96336..e00753496e3e 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -632,8 +632,7 @@ int ecryptfs_interpose(struct dentry *hidden_dentry,
 		       u32 flags);
 int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
 					struct dentry *lower_dentry,
-					struct inode *ecryptfs_dir_inode,
-					struct nameidata *ecryptfs_nd);
+					struct inode *ecryptfs_dir_inode);
 int ecryptfs_decode_and_decrypt_filename(char **decrypted_name,
 					 size_t *decrypted_name_size,
 					 struct dentry *ecryptfs_dentry,
diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c
index 81e10e6a9443..7d1050e254f9 100644
--- a/fs/ecryptfs/file.c
+++ b/fs/ecryptfs/file.c
@@ -317,6 +317,7 @@ ecryptfs_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 const struct file_operations ecryptfs_dir_fops = {
 	.readdir = ecryptfs_readdir,
+	.read = generic_read_dir,
 	.unlocked_ioctl = ecryptfs_unlocked_ioctl,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl = ecryptfs_compat_ioctl,
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index bd33f87a1907..b592938a84bc 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -74,16 +74,20 @@ ecryptfs_create_underlying_file(struct inode *lower_dir_inode,
 	unsigned int flags_save;
 	int rc;
 
-	dentry_save = nd->path.dentry;
-	vfsmount_save = nd->path.mnt;
-	flags_save = nd->flags;
-	nd->path.dentry = lower_dentry;
-	nd->path.mnt = lower_mnt;
-	nd->flags &= ~LOOKUP_OPEN;
+	if (nd) {
+		dentry_save = nd->path.dentry;
+		vfsmount_save = nd->path.mnt;
+		flags_save = nd->flags;
+		nd->path.dentry = lower_dentry;
+		nd->path.mnt = lower_mnt;
+		nd->flags &= ~LOOKUP_OPEN;
+	}
 	rc = vfs_create(lower_dir_inode, lower_dentry, mode, nd);
-	nd->path.dentry = dentry_save;
-	nd->path.mnt = vfsmount_save;
-	nd->flags = flags_save;
+	if (nd) {
+		nd->path.dentry = dentry_save;
+		nd->path.mnt = vfsmount_save;
+		nd->flags = flags_save;
+	}
 	return rc;
 }
 
@@ -241,8 +245,7 @@ out:
  */
 int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
 					struct dentry *lower_dentry,
-					struct inode *ecryptfs_dir_inode,
-					struct nameidata *ecryptfs_nd)
+					struct inode *ecryptfs_dir_inode)
 {
 	struct dentry *lower_dir_dentry;
 	struct vfsmount *lower_mnt;
@@ -290,8 +293,6 @@ int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
 		goto out;
 	if (special_file(lower_inode->i_mode))
 		goto out;
-	if (!ecryptfs_nd)
-		goto out;
 	/* Released in this function */
 	page_virt = kmem_cache_zalloc(ecryptfs_header_cache_2, GFP_USER);
 	if (!page_virt) {
@@ -349,75 +350,6 @@ out:
 }
 
 /**
- * ecryptfs_new_lower_dentry
- * @name: The name of the new dentry.
- * @lower_dir_dentry: Parent directory of the new dentry.
- * @nd: nameidata from last lookup.
- *
- * Create a new dentry or get it from lower parent dir.
- */
-static struct dentry *
-ecryptfs_new_lower_dentry(struct qstr *name, struct dentry *lower_dir_dentry,
-			  struct nameidata *nd)
-{
-	struct dentry *new_dentry;
-	struct dentry *tmp;
-	struct inode *lower_dir_inode;
-
-	lower_dir_inode = lower_dir_dentry->d_inode;
-
-	tmp = d_alloc(lower_dir_dentry, name);
-	if (!tmp)
-		return ERR_PTR(-ENOMEM);
-
-	mutex_lock(&lower_dir_inode->i_mutex);
-	new_dentry = lower_dir_inode->i_op->lookup(lower_dir_inode, tmp, nd);
-	mutex_unlock(&lower_dir_inode->i_mutex);
-
-	if (!new_dentry)
-		new_dentry = tmp;
-	else
-		dput(tmp);
-
-	return new_dentry;
-}
-
-
-/**
- * ecryptfs_lookup_one_lower
- * @ecryptfs_dentry: The eCryptfs dentry that we are looking up
- * @lower_dir_dentry: lower parent directory
- * @name: lower file name
- *
- * Get the lower dentry from vfs. If lower dentry does not exist yet,
- * create it.
- */
-static struct dentry *
-ecryptfs_lookup_one_lower(struct dentry *ecryptfs_dentry,
-			  struct dentry *lower_dir_dentry, struct qstr *name)
-{
-	struct nameidata nd;
-	struct vfsmount *lower_mnt;
-	int err;
-
-	lower_mnt = mntget(ecryptfs_dentry_to_lower_mnt(
-				    ecryptfs_dentry->d_parent));
-	err = vfs_path_lookup(lower_dir_dentry, lower_mnt, name->name , 0, &nd);
-	mntput(lower_mnt);
-
-	if (!err) {
-		/* we dont need the mount */
-		mntput(nd.path.mnt);
-		return nd.path.dentry;
-	}
-	if (err != -ENOENT)
-		return ERR_PTR(err);
-
-	/* create a new lower dentry */
-	return ecryptfs_new_lower_dentry(name, lower_dir_dentry, &nd);
-}
-
-/**
  * ecryptfs_lookup
  * @ecryptfs_dir_inode: The eCryptfs directory inode
  * @ecryptfs_dentry: The eCryptfs dentry that we are looking up
@@ -434,7 +366,6 @@ static struct dentry *ecryptfs_lookup(struct inode *ecryptfs_dir_inode,
 	size_t encrypted_and_encoded_name_size;
 	struct ecryptfs_mount_crypt_stat *mount_crypt_stat = NULL;
 	struct dentry *lower_dir_dentry, *lower_dentry;
-	struct qstr lower_name;
 	int rc = 0;
 
 	if ((ecryptfs_dentry->d_name.len == 1
@@ -444,20 +375,14 @@ static struct dentry *ecryptfs_lookup(struct inode *ecryptfs_dir_inode,
 		goto out_d_drop;
 	}
 	lower_dir_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry->d_parent);
-	lower_name.name = ecryptfs_dentry->d_name.name;
-	lower_name.len = ecryptfs_dentry->d_name.len;
-	lower_name.hash = ecryptfs_dentry->d_name.hash;
-	if (lower_dir_dentry->d_op && lower_dir_dentry->d_op->d_hash) {
-		rc = lower_dir_dentry->d_op->d_hash(lower_dir_dentry,
-				lower_dir_dentry->d_inode, &lower_name);
-		if (rc < 0)
-			goto out_d_drop;
-	}
-	lower_dentry = ecryptfs_lookup_one_lower(ecryptfs_dentry,
-						 lower_dir_dentry, &lower_name);
+	mutex_lock(&lower_dir_dentry->d_inode->i_mutex);
+	lower_dentry = lookup_one_len(ecryptfs_dentry->d_name.name,
+				      lower_dir_dentry,
+				      ecryptfs_dentry->d_name.len);
+	mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
 	if (IS_ERR(lower_dentry)) {
 		rc = PTR_ERR(lower_dentry);
-		ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_lower() returned "
+		ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_len() returned "
 				"[%d] on lower_dentry = [%s]\n", __func__, rc,
 				encrypted_and_encoded_name);
 		goto out_d_drop;
@@ -479,28 +404,21 @@ static struct dentry *ecryptfs_lookup(struct inode *ecryptfs_dir_inode,
 		       "filename; rc = [%d]\n", __func__, rc);
 		goto out_d_drop;
 	}
-	lower_name.name = encrypted_and_encoded_name;
-	lower_name.len = encrypted_and_encoded_name_size;
-	lower_name.hash = full_name_hash(lower_name.name, lower_name.len);
-	if (lower_dir_dentry->d_op && lower_dir_dentry->d_op->d_hash) {
-		rc = lower_dir_dentry->d_op->d_hash(lower_dir_dentry,
-				lower_dir_dentry->d_inode, &lower_name);
-		if (rc < 0)
-			goto out_d_drop;
-	}
-	lower_dentry = ecryptfs_lookup_one_lower(ecryptfs_dentry,
-						 lower_dir_dentry, &lower_name);
+	mutex_lock(&lower_dir_dentry->d_inode->i_mutex);
+	lower_dentry = lookup_one_len(encrypted_and_encoded_name,
+				      lower_dir_dentry,
+				      encrypted_and_encoded_name_size);
+	mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
 	if (IS_ERR(lower_dentry)) {
 		rc = PTR_ERR(lower_dentry);
-		ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_lower() returned "
+		ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_len() returned "
 				"[%d] on lower_dentry = [%s]\n", __func__, rc,
 				encrypted_and_encoded_name);
 		goto out_d_drop;
 	}
 lookup_and_interpose:
 	rc = ecryptfs_lookup_and_interpose_lower(ecryptfs_dentry, lower_dentry,
-						 ecryptfs_dir_inode,
-						 ecryptfs_nd);
+						 ecryptfs_dir_inode);
 	goto out;
 out_d_drop:
 	d_drop(ecryptfs_dentry);
@@ -1092,6 +1010,8 @@ int ecryptfs_getattr(struct vfsmount *mnt, struct dentry *dentry,
 	rc = vfs_getattr(ecryptfs_dentry_to_lower_mnt(dentry),
 			 ecryptfs_dentry_to_lower(dentry), &lower_stat);
 	if (!rc) {
+		fsstack_copy_attr_all(dentry->d_inode,
+				      ecryptfs_inode_to_lower(dentry->d_inode));
 		generic_fillattr(dentry->d_inode, stat);
 		stat->blocks = lower_stat.blocks;
 	}
diff --git a/fs/eventfd.c b/fs/eventfd.c
index e0194b3e14d6..d9a591773919 100644
--- a/fs/eventfd.c
+++ b/fs/eventfd.c
@@ -99,7 +99,7 @@ EXPORT_SYMBOL_GPL(eventfd_ctx_get);
  * @ctx: [in] Pointer to eventfd context.
  *
  * The eventfd context reference must have been previously acquired either
- * with eventfd_ctx_get() or eventfd_ctx_fdget()).
+ * with eventfd_ctx_get() or eventfd_ctx_fdget().
  */
 void eventfd_ctx_put(struct eventfd_ctx *ctx)
 {
@@ -146,9 +146,9 @@ static void eventfd_ctx_do_read(struct eventfd_ctx *ctx, __u64 *cnt)
  * eventfd_ctx_remove_wait_queue - Read the current counter and removes wait queue.
  * @ctx: [in] Pointer to eventfd context.
  * @wait: [in] Wait queue to be removed.
- * @cnt: [out] Pointer to the 64bit conter value.
+ * @cnt: [out] Pointer to the 64-bit counter value.
  *
- * Returns zero if successful, or the following error codes:
+ * Returns %0 if successful, or the following error codes:
  *
  * -EAGAIN      : The operation would have blocked.
  *
@@ -175,11 +175,11 @@ EXPORT_SYMBOL_GPL(eventfd_ctx_remove_wait_queue);
  * eventfd_ctx_read - Reads the eventfd counter or wait if it is zero.
  * @ctx: [in] Pointer to eventfd context.
  * @no_wait: [in] Different from zero if the operation should not block.
- * @cnt: [out] Pointer to the 64bit conter value.
+ * @cnt: [out] Pointer to the 64-bit counter value.
  *
- * Returns zero if successful, or the following error codes:
+ * Returns %0 if successful, or the following error codes:
  *
- * -EAGAIN      : The operation would have blocked but @no_wait was nonzero.
+ * -EAGAIN      : The operation would have blocked but @no_wait was non-zero.
  * -ERESTARTSYS : A signal interrupted the wait operation.
  *
  * If @no_wait is zero, the function might sleep until the eventfd internal
diff --git a/include/linux/module.h b/include/linux/module.h
index 9bdf27c7615b..5de42043dff0 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -62,7 +62,7 @@ struct module_version_attribute {
 	struct module_attribute mattr;
 	const char *module_name;
 	const char *version;
-};
+} __attribute__ ((__aligned__(sizeof(void *))));
 
 struct module_kobject
 {
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index dff633d62e5b..35b36b86d762 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -252,8 +252,12 @@ static int ceph_tcp_recvmsg(struct socket *sock, void *buf, size_t len)
 {
 	struct kvec iov = {buf, len};
 	struct msghdr msg = { .msg_flags = MSG_DONTWAIT | MSG_NOSIGNAL };
+	int r;
 
-	return kernel_recvmsg(sock, &msg, &iov, 1, len, msg.msg_flags);
+	r = kernel_recvmsg(sock, &msg, &iov, 1, len, msg.msg_flags);
+	if (r == -EAGAIN)
+		r = 0;
+	return r;
 }
 
 /*
@@ -264,13 +268,17 @@ static int ceph_tcp_sendmsg(struct socket *sock, struct kvec *iov,
 		     size_t kvlen, size_t len, int more)
 {
 	struct msghdr msg = { .msg_flags = MSG_DONTWAIT | MSG_NOSIGNAL };
+	int r;
 
 	if (more)
 		msg.msg_flags |= MSG_MORE;
 	else
 		msg.msg_flags |= MSG_EOR;  /* superfluous, but what the hell */
 
-	return kernel_sendmsg(sock, &msg, iov, kvlen, len);
+	r = kernel_sendmsg(sock, &msg, iov, kvlen, len);
+	if (r == -EAGAIN)
+		r = 0;
+	return r;
 }
 
 
@@ -847,6 +855,8 @@ static int write_partial_msg_pages(struct ceph_connection *con)
 		    (msg->pages || msg->pagelist || msg->bio || in_trail))
 			kunmap(page);
 
+		if (ret == -EAGAIN)
+			ret = 0;
 		if (ret <= 0)
 			goto out;
 
@@ -1737,16 +1747,12 @@ more_kvec:
 	if (con->out_skip) {
 		ret = write_partial_skip(con);
 		if (ret <= 0)
-			goto done;
-		if (ret < 0) {
-			dout("try_write write_partial_skip err %d\n", ret);
-			goto done;
-		}
+			goto out;
 	}
 	if (con->out_kvec_left) {
 		ret = write_partial_kvec(con);
 		if (ret <= 0)
-			goto done;
+			goto out;
 	}
 
 	/* msg pages? */
@@ -1761,11 +1767,11 @@ more_kvec:
 		if (ret == 1)
 			goto more_kvec;  /* we need to send the footer, too! */
 		if (ret == 0)
-			goto done;
+			goto out;
 		if (ret < 0) {
 			dout("try_write write_partial_msg_pages err %d\n",
 			     ret);
-			goto done;
+			goto out;
 		}
 	}
 
@@ -1789,10 +1795,9 @@ do_next:
 	/* Nothing to do! */
 	clear_bit(WRITE_PENDING, &con->state);
 	dout("try_write nothing else to write.\n");
-done:
 	ret = 0;
 out:
-	dout("try_write done on %p\n", con);
+	dout("try_write done on %p ret %d\n", con, ret);
 	return ret;
 }
 
@@ -1821,19 +1826,17 @@ more:
 			dout("try_read connecting\n");
 			ret = read_partial_banner(con);
 			if (ret <= 0)
-				goto done;
-			if (process_banner(con) < 0) {
-				ret = -1;
 				goto out;
-			}
+			ret = process_banner(con);
+			if (ret < 0)
+				goto out;
 		}
 		ret = read_partial_connect(con);
 		if (ret <= 0)
-			goto done;
-		if (process_connect(con) < 0) {
-			ret = -1;
 			goto out;
-		}
+		ret = process_connect(con);
+		if (ret < 0)
+			goto out;
 		goto more;
 	}
 
@@ -1848,7 +1851,7 @@ more:
 		dout("skipping %d / %d bytes\n", skip, -con->in_base_pos);
 		ret = ceph_tcp_recvmsg(con->sock, buf, skip);
 		if (ret <= 0)
-			goto done;
+			goto out;
 		con->in_base_pos += ret;
 		if (con->in_base_pos)
 			goto more;
@@ -1859,7 +1862,7 @@ more:
 		 */
 		ret = ceph_tcp_recvmsg(con->sock, &con->in_tag, 1);
 		if (ret <= 0)
-			goto done;
+			goto out;
 		dout("try_read got tag %d\n", (int)con->in_tag);
 		switch (con->in_tag) {
 		case CEPH_MSGR_TAG_MSG:
@@ -1870,7 +1873,7 @@ more:
 			break;
 		case CEPH_MSGR_TAG_CLOSE:
 			set_bit(CLOSED, &con->state);   /* fixme */
-			goto done;
+			goto out;
 		default:
 			goto bad_tag;
 		}
@@ -1882,13 +1885,12 @@ more:
 			case -EBADMSG:
 				con->error_msg = "bad crc";
 				ret = -EIO;
-				goto out;
+				break;
 			case -EIO:
 				con->error_msg = "io error";
-				goto out;
-			default:
-				goto done;
+				break;
 			}
+			goto out;
 		}
 		if (con->in_tag == CEPH_MSGR_TAG_READY)
 			goto more;
@@ -1898,15 +1900,13 @@ more:
 	if (con->in_tag == CEPH_MSGR_TAG_ACK) {
 		ret = read_partial_ack(con);
 		if (ret <= 0)
-			goto done;
+			goto out;
 		process_ack(con);
 		goto more;
 	}
 
-done:
-	ret = 0;
 out:
-	dout("try_read done on %p\n", con);
+	dout("try_read done on %p ret %d\n", con, ret);
 	return ret;
 
 bad_tag:
diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c
index c9a16abacab4..6c94c6ce2925 100644
--- a/scripts/basic/fixdep.c
+++ b/scripts/basic/fixdep.c
@@ -315,6 +315,7 @@ static void parse_dep_file(void *map, size_t len)
 	char *end = m + len;
 	char *p;
 	char s[PATH_MAX];
+	int first;
 
 	p = strchr(m, ':');
 	if (!p) {
@@ -327,6 +328,7 @@ static void parse_dep_file(void *map, size_t len)
 
 	clear_config();
 
+	first = 1;
 	while (m < end) {
 		while (m < end && (*m == ' ' || *m == '\\' || *m == '\n'))
 			m++;
@@ -340,9 +342,17 @@ static void parse_dep_file(void *map, size_t len)
 		if (strrcmp(s, "include/generated/autoconf.h") &&
 		    strrcmp(s, "arch/um/include/uml-config.h") &&
 		    strrcmp(s, ".ver")) {
-			printf("  %s \\\n", s);
+			/*
+			 * Do not output the first dependency (the
+			 * source file), so that kbuild is not confused
+			 * if a .c file is rewritten into .S or vice
+			 * versa.
+			 */
+			if (!first)
+				printf("  %s \\\n", s);
 			do_config_file(s);
 		}
+		first = 0;
 		m = p + 1;
 	}
 	printf("\n%s: $(deps_%s)\n\n", target, target);
diff --git a/sound/pci/au88x0/au88x0_core.c b/sound/pci/au88x0/au88x0_core.c
index 23f49f356e0f..16c0bdfbb164 100644
--- a/sound/pci/au88x0/au88x0_core.c
+++ b/sound/pci/au88x0/au88x0_core.c
@@ -1252,11 +1252,19 @@ static void vortex_adbdma_resetup(vortex_t *vortex, int adbdma) {
 static int inline vortex_adbdma_getlinearpos(vortex_t * vortex, int adbdma)
 {
 	stream_t *dma = &vortex->dma_adb[adbdma];
-	int temp;
+	int temp, page, delta;
 
 	temp = hwread(vortex->mmio, VORTEX_ADBDMA_STAT + (adbdma << 2));
-	temp = (dma->period_virt * dma->period_bytes) + (temp & (dma->period_bytes - 1));
-	return temp;
+	page = (temp & ADB_SUBBUF_MASK) >> ADB_SUBBUF_SHIFT;
+	if (dma->nr_periods >= 4)
+		delta = (page - dma->period_real) & 3;
+	else {
+		delta = (page - dma->period_real);
+		if (delta < 0)
+			delta += dma->nr_periods;
+	}
+	return (dma->period_virt + delta) * dma->period_bytes
+		+ (temp & (dma->period_bytes - 1));
 }
 
 static void vortex_adbdma_startfifo(vortex_t * vortex, int adbdma)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 0baffcdee8f9..fcedad9a5fef 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2308,6 +2308,7 @@ static struct snd_pci_quirk position_fix_list[] __devinitdata = {
 	SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB),
+	SND_PCI_QUIRK(0x1043, 0x8410, "ASUS", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1106, 0x3288, "ASUS M2V-MX SE", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1179, 0xff10, "Toshiba A100-259", POS_FIX_LPIB),
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index fbe97d32140d..dd7c5c12225d 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3410,7 +3410,7 @@ static void cx_auto_parse_output(struct hda_codec *codec)
 		}
 	}
 	spec->multiout.dac_nids = spec->private_dac_nids;
-	spec->multiout.max_channels = nums * 2;
+	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
 	if (cfg->hp_outs > 0)
 		spec->auto_mute = 1;
@@ -3729,9 +3729,9 @@ static int cx_auto_init(struct hda_codec *codec)
 	return 0;
 }
 
-static int cx_auto_add_volume(struct hda_codec *codec, const char *basename,
+static int cx_auto_add_volume_idx(struct hda_codec *codec, const char *basename,
 			      const char *dir, int cidx,
-			      hda_nid_t nid, int hda_dir)
+			      hda_nid_t nid, int hda_dir, int amp_idx)
 {
 	static char name[32];
 	static struct snd_kcontrol_new knew[] = {
@@ -3743,7 +3743,8 @@ static int cx_auto_add_volume(struct hda_codec *codec, const char *basename,
 
 	for (i = 0; i < 2; i++) {
 		struct snd_kcontrol *kctl;
-		knew[i].private_value = HDA_COMPOSE_AMP_VAL(nid, 3, 0, hda_dir);
+		knew[i].private_value = HDA_COMPOSE_AMP_VAL(nid, 3, amp_idx,
+							    hda_dir);
 		knew[i].subdevice = HDA_SUBDEV_AMP_FLAG;
 		knew[i].index = cidx;
 		snprintf(name, sizeof(name), "%s%s %s", basename, dir, sfx[i]);
@@ -3759,6 +3760,9 @@ static int cx_auto_add_volume(struct hda_codec *codec, const char *basename,
 	return 0;
 }
 
+#define cx_auto_add_volume(codec, str, dir, cidx, nid, hda_dir)		\
+	cx_auto_add_volume_idx(codec, str, dir, cidx, nid, hda_dir, 0)
+
 #define cx_auto_add_pb_volume(codec, nid, str, idx)			\
 	cx_auto_add_volume(codec, str, " Playback", idx, nid, HDA_OUTPUT)
 
@@ -3808,29 +3812,60 @@ static int cx_auto_build_input_controls(struct hda_codec *codec)
 	struct conexant_spec *spec = codec->spec;
 	struct auto_pin_cfg *cfg = &spec->autocfg;
 	static const char *prev_label;
-	int i, err, cidx;
+	int i, err, cidx, conn_len;
+	hda_nid_t conn[HDA_MAX_CONNECTIONS];
+
+	int multi_adc_volume = 0; /* If the ADC nid has several input volumes */
+	int adc_nid = spec->adc_nids[0];
+
+	conn_len = snd_hda_get_connections(codec, adc_nid, conn,
+					   HDA_MAX_CONNECTIONS);
+	if (conn_len < 0)
+		return conn_len;
+
+	multi_adc_volume = cfg->num_inputs > 1 && conn_len > 1;
+	if (!multi_adc_volume) {
+		err = cx_auto_add_volume(codec, "Capture", "", 0, adc_nid,
+					 HDA_INPUT);
+		if (err < 0)
+			return err;
+	}
 
-	err = cx_auto_add_volume(codec, "Capture", "", 0, spec->adc_nids[0],
-				 HDA_INPUT);
-	if (err < 0)
-		return err;
 	prev_label = NULL;
 	cidx = 0;
 	for (i = 0; i < cfg->num_inputs; i++) {
 		hda_nid_t nid = cfg->inputs[i].pin;
 		const char *label;
-		if (!(get_wcaps(codec, nid) & AC_WCAP_IN_AMP))
+		int j;
+		int pin_amp = get_wcaps(codec, nid) & AC_WCAP_IN_AMP;
+		if (!pin_amp && !multi_adc_volume)
 			continue;
+
 		label = hda_get_autocfg_input_label(codec, cfg, i);
 		if (label == prev_label)
 			cidx++;
 		else
 			cidx = 0;
 		prev_label = label;
-		err = cx_auto_add_volume(codec, label, " Capture", cidx,
-					 nid, HDA_INPUT);
-		if (err < 0)
-			return err;
+
+		if (pin_amp) {
+			err = cx_auto_add_volume(codec, label, " Boost", cidx,
+						 nid, HDA_INPUT);
+			if (err < 0)
+				return err;
+		}
+
+		if (!multi_adc_volume)
+			continue;
+		for (j = 0; j < conn_len; j++) {
+			if (conn[j] == nid) {
+				err = cx_auto_add_volume_idx(codec, label,
+				    " Capture", cidx, adc_nid, HDA_INPUT, j);
+				if (err < 0)
+					return err;
+				break;
+			}
+		}
 	}
 	return 0;
 }
diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c
index 68b97477577b..66eabafb1c24 100644
--- a/sound/usb/caiaq/audio.c
+++ b/sound/usb/caiaq/audio.c
@@ -785,7 +785,7 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
 	}
 
 	dev->pcm->private_data = dev;
-	strcpy(dev->pcm->name, dev->product_name);
+	strlcpy(dev->pcm->name, dev->product_name, sizeof(dev->pcm->name));
 
 	memset(dev->sub_playback, 0, sizeof(dev->sub_playback));
 	memset(dev->sub_capture, 0, sizeof(dev->sub_capture));
diff --git a/sound/usb/caiaq/midi.c b/sound/usb/caiaq/midi.c
index 2f218c77fff2..a1a47088fd0c 100644
--- a/sound/usb/caiaq/midi.c
+++ b/sound/usb/caiaq/midi.c
@@ -136,7 +136,7 @@ int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *device)
 	if (ret < 0)
 		return ret;
 
-	strcpy(rmidi->name, device->product_name);
+	strlcpy(rmidi->name, device->product_name, sizeof(rmidi->name));
 
 	rmidi->info_flags = SNDRV_RAWMIDI_INFO_DUPLEX;
 	rmidi->private_data = device;