summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorRoger Quadros <rogerq@ti.com>2015-06-02 12:10:40 +0300
committerKishon Vijay Abraham I <kishon@ti.com>2015-07-15 20:02:09 +0530
commit0a0830feb2adce8c7234b8c166a32fe9e7616788 (patch)
tree0a3677d1b6a3446334d144ca10c7038ffaa06999
parentd770e558e21961ad6cfdf0ff7df0eb5d7d4f0754 (diff)
downloadlinux-0a0830feb2adce8c7234b8c166a32fe9e7616788.tar.gz
linux-0a0830feb2adce8c7234b8c166a32fe9e7616788.tar.bz2
linux-0a0830feb2adce8c7234b8c166a32fe9e7616788.zip
phy: ti-pipe3: fix suspend
Relying on PM-ops for shutting down PHY clocks was a bad idea since the users (e.g. PCIe/SATA) might not have been suspended by then. The main culprit for not shutting down the clocks was the stray pm_runtime_get() call in probe. Fix the whole thing in the right way by getting rid of that pm_runtime_get() call from probe and removing all PM-ops. It is the sole responsibility of the PHY user to properly turn OFF and de-initialize the PHY as part of its suspend routine. As PHY core serializes init/exit we don't need to use a spinlock in this driver. So get rid of it. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-rw-r--r--drivers/phy/phy-ti-pipe3.c172
1 files changed, 41 insertions, 131 deletions
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index 53f295c1bab1..3510b81db3fa 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -28,7 +28,6 @@
#include <linux/delay.h>
#include <linux/phy/omap_control_phy.h>
#include <linux/of_platform.h>
-#include <linux/spinlock.h>
#define PLL_STATUS 0x00000004
#define PLL_GO 0x00000008
@@ -83,10 +82,6 @@ struct ti_pipe3 {
struct clk *refclk;
struct clk *div_clk;
struct pipe3_dpll_map *dpll_map;
- bool enabled;
- spinlock_t lock; /* serialize clock enable/disable */
- /* the below flag is needed specifically for SATA */
- bool refclk_enabled;
};
static struct pipe3_dpll_map dpll_map_usb[] = {
@@ -137,6 +132,9 @@ static struct pipe3_dpll_params *ti_pipe3_get_dpll_params(struct ti_pipe3 *phy)
return NULL;
}
+static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy);
+static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy);
+
static int ti_pipe3_power_off(struct phy *x)
{
struct ti_pipe3 *phy = phy_get_drvdata(x);
@@ -217,6 +215,7 @@ static int ti_pipe3_init(struct phy *x)
u32 val;
int ret = 0;
+ ti_pipe3_enable_clocks(phy);
/*
* Set pcie_pcs register to 0x96 for proper functioning of phy
* as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table
@@ -250,33 +249,35 @@ static int ti_pipe3_exit(struct phy *x)
u32 val;
unsigned long timeout;
- /* SATA DPLL can't be powered down due to Errata i783 and PCIe
- * does not have internal DPLL
- */
- if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata") ||
- of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie"))
+ /* SATA DPLL can't be powered down due to Errata i783 */
+ if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata"))
return 0;
- /* Put DPLL in IDLE mode */
- val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
- val |= PLL_IDLE;
- ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
-
- /* wait for LDO and Oscillator to power down */
- timeout = jiffies + msecs_to_jiffies(PLL_IDLE_TIME);
- do {
- cpu_relax();
- val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
- if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN))
- break;
- } while (!time_after(jiffies, timeout));
+ /* PCIe doesn't have internal DPLL */
+ if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
+ /* Put DPLL in IDLE mode */
+ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
+ val |= PLL_IDLE;
+ ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
- if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
- dev_err(phy->dev, "Failed to power down: PLL_STATUS 0x%x\n",
- val);
- return -EBUSY;
+ /* wait for LDO and Oscillator to power down */
+ timeout = jiffies + msecs_to_jiffies(PLL_IDLE_TIME);
+ do {
+ cpu_relax();
+ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
+ if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN))
+ break;
+ } while (!time_after(jiffies, timeout));
+
+ if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
+ dev_err(phy->dev, "Failed to power down: PLL_STATUS 0x%x\n",
+ val);
+ return -EBUSY;
+ }
}
+ ti_pipe3_disable_clocks(phy);
+
return 0;
}
static struct phy_ops ops = {
@@ -306,7 +307,6 @@ static int ti_pipe3_probe(struct platform_device *pdev)
return -ENOMEM;
phy->dev = &pdev->dev;
- spin_lock_init(&phy->lock);
if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
match = of_match_device(ti_pipe3_id_table, &pdev->dev);
@@ -402,6 +402,10 @@ static int ti_pipe3_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, phy);
pm_runtime_enable(phy->dev);
+ /* Prevent auto-disable of refclk for SATA PHY due to Errata i783 */
+ if (of_device_is_compatible(node, "ti,phy-pipe3-sata"))
+ if (!IS_ERR(phy->refclk))
+ clk_prepare_enable(phy->refclk);
generic_phy = devm_phy_create(phy->dev, NULL, &ops);
if (IS_ERR(generic_phy))
@@ -413,63 +417,33 @@ static int ti_pipe3_probe(struct platform_device *pdev)
if (IS_ERR(phy_provider))
return PTR_ERR(phy_provider);
- pm_runtime_get(&pdev->dev);
-
return 0;
}
static int ti_pipe3_remove(struct platform_device *pdev)
{
- if (!pm_runtime_suspended(&pdev->dev))
- pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return 0;
}
-#ifdef CONFIG_PM
-static int ti_pipe3_enable_refclk(struct ti_pipe3 *phy)
+static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy)
{
- if (!IS_ERR(phy->refclk) && !phy->refclk_enabled) {
- int ret;
+ int ret = 0;
+ if (!IS_ERR(phy->refclk)) {
ret = clk_prepare_enable(phy->refclk);
if (ret) {
dev_err(phy->dev, "Failed to enable refclk %d\n", ret);
return ret;
}
- phy->refclk_enabled = true;
}
- return 0;
-}
-
-static void ti_pipe3_disable_refclk(struct ti_pipe3 *phy)
-{
- if (!IS_ERR(phy->refclk))
- clk_disable_unprepare(phy->refclk);
-
- phy->refclk_enabled = false;
-}
-
-static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy)
-{
- int ret = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&phy->lock, flags);
- if (phy->enabled)
- goto err1;
-
- ret = ti_pipe3_enable_refclk(phy);
- if (ret)
- goto err1;
-
if (!IS_ERR(phy->wkupclk)) {
ret = clk_prepare_enable(phy->wkupclk);
if (ret) {
dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
- goto err2;
+ goto disable_refclk;
}
}
@@ -477,96 +451,33 @@ static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy)
ret = clk_prepare_enable(phy->div_clk);
if (ret) {
dev_err(phy->dev, "Failed to enable div_clk %d\n", ret);
- goto err3;
+ goto disable_wkupclk;
}
}
- phy->enabled = true;
- spin_unlock_irqrestore(&phy->lock, flags);
return 0;
-err3:
+disable_wkupclk:
if (!IS_ERR(phy->wkupclk))
clk_disable_unprepare(phy->wkupclk);
-err2:
+disable_refclk:
if (!IS_ERR(phy->refclk))
clk_disable_unprepare(phy->refclk);
- ti_pipe3_disable_refclk(phy);
-err1:
- spin_unlock_irqrestore(&phy->lock, flags);
return ret;
}
static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy)
{
- unsigned long flags;
-
- spin_lock_irqsave(&phy->lock, flags);
- if (!phy->enabled) {
- spin_unlock_irqrestore(&phy->lock, flags);
- return;
- }
-
if (!IS_ERR(phy->wkupclk))
clk_disable_unprepare(phy->wkupclk);
- /* Don't disable refclk for SATA PHY due to Errata i783 */
- if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata"))
- ti_pipe3_disable_refclk(phy);
+ if (!IS_ERR(phy->refclk))
+ clk_disable_unprepare(phy->refclk);
if (!IS_ERR(phy->div_clk))
clk_disable_unprepare(phy->div_clk);
- phy->enabled = false;
- spin_unlock_irqrestore(&phy->lock, flags);
-}
-
-static int ti_pipe3_runtime_suspend(struct device *dev)
-{
- struct ti_pipe3 *phy = dev_get_drvdata(dev);
-
- ti_pipe3_disable_clocks(phy);
- return 0;
}
-static int ti_pipe3_runtime_resume(struct device *dev)
-{
- struct ti_pipe3 *phy = dev_get_drvdata(dev);
- int ret = 0;
-
- ret = ti_pipe3_enable_clocks(phy);
- return ret;
-}
-
-static int ti_pipe3_suspend(struct device *dev)
-{
- struct ti_pipe3 *phy = dev_get_drvdata(dev);
-
- ti_pipe3_disable_clocks(phy);
- return 0;
-}
-
-static int ti_pipe3_resume(struct device *dev)
-{
- struct ti_pipe3 *phy = dev_get_drvdata(dev);
- int ret;
-
- ret = ti_pipe3_enable_clocks(phy);
- if (ret)
- return ret;
-
- pm_runtime_disable(dev);
- pm_runtime_set_active(dev);
- pm_runtime_enable(dev);
- return 0;
-}
-#endif
-
-static const struct dev_pm_ops ti_pipe3_pm_ops = {
- SET_RUNTIME_PM_OPS(ti_pipe3_runtime_suspend,
- ti_pipe3_runtime_resume, NULL)
- SET_SYSTEM_SLEEP_PM_OPS(ti_pipe3_suspend, ti_pipe3_resume)
-};
-
static const struct of_device_id ti_pipe3_id_table[] = {
{
.compatible = "ti,phy-usb3",
@@ -592,7 +503,6 @@ static struct platform_driver ti_pipe3_driver = {
.remove = ti_pipe3_remove,
.driver = {
.name = "ti-pipe3",
- .pm = &ti_pipe3_pm_ops,
.of_match_table = ti_pipe3_id_table,
},
};