mISDN: Add HFC USB driver

Enable support for USB ISDN TAs with Cologne Chip AG's
HFC-S USB ISDN Controller.

Signed-off-by: Martin Bachem <m.bachem@gmx.de>
Signed-off-by: Karsten Keil <kkeil@suse.de>

4 files changed, 2622 insertions, 0 deletions

diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig
index 14793480c453..fd112ae252cf 100644
--- a/drivers/isdn/hardware/mISDN/Kconfig
+++ b/drivers/isdn/hardware/mISDN/Kconfig
@@ -23,3 +23,10 @@ config MISDN_HFCMULTI
 	   * HFC-8S (8 S/T interfaces on one chip)
 	   * HFC-E1 (E1 interface for 2Mbit ISDN)
 
+config MISDN_HFCUSB
+	tristate "Support for HFC-S USB based TAs"
+	depends on USB
+	help
+	  Enable support for USB ISDN TAs with Cologne Chip AG's
+	  HFC-S USB ISDN Controller
+
diff --git a/drivers/isdn/hardware/mISDN/Makefile b/drivers/isdn/hardware/mISDN/Makefile
index 1e7ca5332ad7..b0403526bbba 100644
--- a/drivers/isdn/hardware/mISDN/Makefile
+++ b/drivers/isdn/hardware/mISDN/Makefile
@@ -5,3 +5,4 @@
 
 obj-$(CONFIG_MISDN_HFCPCI) += hfcpci.o
 obj-$(CONFIG_MISDN_HFCMULTI) += hfcmulti.o
+obj-$(CONFIG_MISDN_HFCUSB) += hfcsusb.o
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
new file mode 100644
index 000000000000..ba6925fbf38a
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -0,0 +1,2196 @@
+/* hfcsusb.c
+ * mISDN driver for Colognechip HFC-S USB chip
+ *
+ * Copyright 2001 by Peter Sprenger (sprenger@moving-bytes.de)
+ * Copyright 2008 by Martin Bachem (info@bachem-it.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * module params
+ *   debug=<n>, default=0, with n=0xHHHHGGGG
+ *      H - l1 driver flags described in hfcsusb.h
+ *      G - common mISDN debug flags described at mISDNhw.h
+ *
+ *   poll=<n>, default 128
+ *     n : burst size of PH_DATA_IND at transparent rx data
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/usb.h>
+#include <linux/mISDNhw.h>
+#include "hfcsusb.h"
+
+const char *hfcsusb_rev = "Revision: 0.3.3 (socket), 2008-11-05";
+
+static unsigned int debug;
+static int poll = DEFAULT_TRANSP_BURST_SZ;
+
+static LIST_HEAD(HFClist);
+static DEFINE_RWLOCK(HFClock);
+
+
+MODULE_AUTHOR("Martin Bachem");
+MODULE_LICENSE("GPL");
+module_param(debug, uint, S_IRUGO | S_IWUSR);
+module_param(poll, int, 0);
+
+static int hfcsusb_cnt;
+
+/* some function prototypes */
+static void hfcsusb_ph_command(struct hfcsusb *hw, u_char command);
+static void release_hw(struct hfcsusb *hw);
+static void reset_hfcsusb(struct hfcsusb *hw);
+static void setPortMode(struct hfcsusb *hw);
+static void hfcsusb_start_endpoint(struct hfcsusb *hw, int channel);
+static void hfcsusb_stop_endpoint(struct hfcsusb *hw, int channel);
+static int  hfcsusb_setup_bch(struct bchannel *bch, int protocol);
+static void deactivate_bchannel(struct bchannel *bch);
+static void hfcsusb_ph_info(struct hfcsusb *hw);
+
+/* start next background transfer for control channel */
+static void
+ctrl_start_transfer(struct hfcsusb *hw)
+{
+	if (debug & DBG_HFC_CALL_TRACE)
+		printk(KERN_DEBUG "%s: %s\n", hw->name, __func__);
+
+	if (hw->ctrl_cnt) {
+		hw->ctrl_urb->pipe = hw->ctrl_out_pipe;
+		hw->ctrl_urb->setup_packet = (u_char *)&hw->ctrl_write;
+		hw->ctrl_urb->transfer_buffer = NULL;
+		hw->ctrl_urb->transfer_buffer_length = 0;
+		hw->ctrl_write.wIndex =
+		    cpu_to_le16(hw->ctrl_buff[hw->ctrl_out_idx].hfcs_reg);
+		hw->ctrl_write.wValue =
+		    cpu_to_le16(hw->ctrl_buff[hw->ctrl_out_idx].reg_val);
+
+		usb_submit_urb(hw->ctrl_urb, GFP_ATOMIC);
+	}
+}
+
+/*
+ * queue a control transfer request to write HFC-S USB
+ * chip register using CTRL resuest queue
+ */
+static int write_reg(struct hfcsusb *hw, __u8 reg, __u8 val)
+{
+	struct ctrl_buf *buf;
+
+	if (debug & DBG_HFC_CALL_TRACE)
+		printk(KERN_DEBUG "%s: %s reg(0x%02x) val(0x%02x)\n",
+			hw->name, __func__, reg, val);
+
+	spin_lock(&hw->ctrl_lock);
+	if (hw->ctrl_cnt >= HFC_CTRL_BUFSIZE)
+		return 1;
+	buf = &hw->ctrl_buff[hw->ctrl_in_idx];
+	buf->hfcs_reg = reg;
+	buf->reg_val = val;
+	if (++hw->ctrl_in_idx >= HFC_CTRL_BUFSIZE)
+		hw->ctrl_in_idx = 0;
+	if (++hw->ctrl_cnt == 1)
+		ctrl_start_transfer(hw);
+	spin_unlock(&hw->ctrl_lock);
+
+	return 0;
+}
+
+/* control completion routine handling background control cmds */
+static void
+ctrl_complete(struct urb *urb)
+{
+	struct hfcsusb *hw = (struct hfcsusb *) urb->context;
+	struct ctrl_buf *buf;
+
+	if (debug & DBG_HFC_CALL_TRACE)
+		printk(KERN_DEBUG "%s: %s\n", hw->name, __func__);
+
+	urb->dev = hw->dev;
+	if (hw->ctrl_cnt) {
+		buf = &hw->ctrl_buff[hw->ctrl_out_idx];
+		hw->ctrl_cnt--;	/* decrement actual count */
+		if (++hw->ctrl_out_idx >= HFC_CTRL_BUFSIZE)
+			hw->ctrl_out_idx = 0;	/* pointer wrap */
+
+		ctrl_start_transfer(hw); /* start next transfer */
+	}
+}
+
+/* handle LED bits   */
+static void
+set_led_bit(struct hfcsusb *hw, signed short led_bits, int set_on)
+{
+	if (set_on) {
+		if (led_bits < 0)
+			hw->led_state &= ~abs(led_bits);
+		else
+			hw->led_state |= led_bits;
+	} else {
+		if (led_bits < 0)
+			hw->led_state |= abs(led_bits);
+		else
+			hw->led_state &= ~led_bits;
+	}
+}
+
+/* handle LED requests  */
+static void
+handle_led(struct hfcsusb *hw, int event)
+{
+	struct hfcsusb_vdata *driver_info = (struct hfcsusb_vdata *)
+		hfcsusb_idtab[hw->vend_idx].driver_info;
+	__u8 tmpled;
+
+	if (driver_info->led_scheme == LED_OFF)
+		return;
+	tmpled = hw->led_state;
+
+	switch (event) {
+	case LED_POWER_ON:
+		set_led_bit(hw, driver_info->led_bits[0], 1);
+		set_led_bit(hw, driver_info->led_bits[1], 0);
+		set_led_bit(hw, driver_info->led_bits[2], 0);
+		set_led_bit(hw, driver_info->led_bits[3], 0);
+		break;
+	case LED_POWER_OFF:
+		set_led_bit(hw, driver_info->led_bits[0], 0);
+		set_led_bit(hw, driver_info->led_bits[1], 0);
+		set_led_bit(hw, driver_info->led_bits[2], 0);
+		set_led_bit(hw, driver_info->led_bits[3], 0);
+		break;
+	case LED_S0_ON:
+		set_led_bit(hw, driver_info->led_bits[1], 1);
+		break;
+	case LED_S0_OFF:
+		set_led_bit(hw, driver_info->led_bits[1], 0);
+		break;
+	case LED_B1_ON:
+		set_led_bit(hw, driver_info->led_bits[2], 1);
+		break;
+	case LED_B1_OFF:
+		set_led_bit(hw, driver_info->led_bits[2], 0);
+		break;
+	case LED_B2_ON:
+		set_led_bit(hw, driver_info->led_bits[3], 1);
+		break;
+	case LED_B2_OFF:
+		set_led_bit(hw, driver_info->led_bits[3], 0);
+		break;
+	}
+
+	if (hw->led_state != tmpled) {
+		if (debug & DBG_HFC_CALL_TRACE)
+			printk(KERN_DEBUG "%s: %s reg(0x%02x) val(x%02x)\n",
+			    hw->name, __func__,
+			    HFCUSB_P_DATA, hw->led_state);
+
+		write_reg(hw, HFCUSB_P_DATA, hw->led_state);
+	}
+}
+
+/*
+ * Layer2 -> Layer 1 Bchannel data
+ */
+static int
+hfcusb_l2l1B(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct bchannel		*bch = container_of(ch, struct bchannel, ch);
+	struct hfcsusb		*hw = bch->hw;
+	int			ret = -EINVAL;
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+	u_long			flags;
+
+	if (debug & DBG_HFC_CALL_TRACE)
+		printk(KERN_DEBUG "%s: %s\n", hw->name, __func__);
+
+	switch (hh->prim) {
+	case PH_DATA_REQ:
+		spin_lock_irqsave(&hw->lock, flags);
+		ret = bchannel_senddata(bch, skb);
+		spin_unlock_irqrestore(&hw->lock, flags);
+		if (debug & DBG_HFC_CALL_TRACE)
+			printk(KERN_DEBUG "%s: %s PH_DATA_REQ ret(%i)\n",
+				hw->name, __func__, ret);
+		if (ret > 0) {
+			/*
+			 * other l1 drivers don't send early confirms on
+			 * transp data, but hfcsusb does because tx_next
+			 * skb is needed in tx_iso_complete()
+			 */
+			queue_ch_frame(ch, PH_DATA_CNF, hh->id, NULL);
+			ret = 0;
+		}
+		return ret;
+	case PH_ACTIVATE_REQ:
+		if (!test_and_set_bit(FLG_ACTIVE, &bch->Flags)) {
+			hfcsusb_start_endpoint(hw, bch->nr);
+			ret = hfcsusb_setup_bch(bch, ch->protocol);
+		} else
+			ret = 0;
+		if (!ret)
+			_queue_data(ch, PH_ACTIVATE_IND, MISDN_ID_ANY,
+				0, NULL, GFP_KERNEL);
+		break;
+	case PH_DEACTIVATE_REQ:
+		deactivate_bchannel(bch);
+		_queue_data(ch, PH_DEACTIVATE_IND, MISDN_ID_ANY,
+			0, NULL, GFP_KERNEL);
+		ret = 0;
+		break;
+	}
+	if (!ret)
+		dev_kfree_skb(skb);
+	return ret;
+}
+
+/*
+ * send full D/B channel status information
+ * as MPH_INFORMATION_IND
+ */
+static void
+hfcsusb_ph_info(struct hfcsusb *hw)
+{
+	struct ph_info *phi;
+	struct dchannel *dch = &hw->dch;
+	int i;
+
+	phi = kzalloc(sizeof(struct ph_info) +
+		dch->dev.nrbchan * sizeof(struct ph_info_ch), GFP_ATOMIC);
+	phi->dch.ch.protocol = hw->protocol;
+	phi->dch.ch.Flags = dch->Flags;
+	phi->dch.state = dch->state;
+	phi->dch.num_bch = dch->dev.nrbchan;
+	for (i = 0; i < dch->dev.nrbchan; i++) {
+		phi->bch[i].protocol = hw->bch[i].ch.protocol;
+		phi->bch[i].Flags = hw->bch[i].Flags;
+	}
+	_queue_data(&dch->dev.D, MPH_INFORMATION_IND, MISDN_ID_ANY,
+		sizeof(struct ph_info_dch) + dch->dev.nrbchan *
+		sizeof(struct ph_info_ch), phi, GFP_ATOMIC);
+}
+
+/*
+ * Layer2 -> Layer 1 Dchannel data
+ */
+static int
+hfcusb_l2l1D(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct mISDNdevice	*dev = container_of(ch, struct mISDNdevice, D);
+	struct dchannel		*dch = container_of(dev, struct dchannel, dev);
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+	struct hfcsusb		*hw = dch->hw;
+	int			ret = -EINVAL;
+	u_long			flags;
+
+	switch (hh->prim) {
+	case PH_DATA_REQ:
+		if (debug & DBG_HFC_CALL_TRACE)
+			printk(KERN_DEBUG "%s: %s: PH_DATA_REQ\n",
+				hw->name, __func__);
+
+		spin_lock_irqsave(&hw->lock, flags);
+		ret = dchannel_senddata(dch, skb);
+		spin_unlock_irqrestore(&hw->lock, flags);
+		if (ret > 0) {
+			ret = 0;
+			queue_ch_frame(ch, PH_DATA_CNF, hh->id, NULL);
+		}
+		break;
+
+	case PH_ACTIVATE_REQ:
+		if (debug & DBG_HFC_CALL_TRACE)
+			printk(KERN_DEBUG "%s: %s: PH_ACTIVATE_REQ %s\n",
+				hw->name, __func__,
+				(hw->protocol == ISDN_P_NT_S0) ? "NT" : "TE");
+
+		if (hw->protocol == ISDN_P_NT_S0) {
+			ret = 0;
+			if (test_bit(FLG_ACTIVE, &dch->Flags)) {
+				_queue_data(&dch->dev.D,
+					PH_ACTIVATE_IND, MISDN_ID_ANY, 0,
+					NULL, GFP_ATOMIC);
+			} else {
+				hfcsusb_ph_command(hw,
+					HFC_L1_ACTIVATE_NT);
+				test_and_set_bit(FLG_L2_ACTIVATED,
+					&dch->Flags);
+			}
+		} else {
+			hfcsusb_ph_command(hw, HFC_L1_ACTIVATE_TE);
+			ret = l1_event(dch->l1, hh->prim);
+		}
+		break;
+
+	case PH_DEACTIVATE_REQ:
+		if (debug & DBG_HFC_CALL_TRACE)
+			printk(KERN_DEBUG "%s: %s: PH_DEACTIVATE_REQ\n",
+				hw->name, __func__);
+		test_and_clear_bit(FLG_L2_ACTIVATED, &dch->Flags);
+
+		if (hw->protocol == ISDN_P_NT_S0) {
+			hfcsusb_ph_command(hw, HFC_L1_DEACTIVATE_NT);
+			spin_lock_irqsave(&hw->lock, flags);
+			skb_queue_purge(&dch->squeue);
+			if (dch->tx_skb) {
+				dev_kfree_skb(dch->tx_skb);
+				dch->tx_skb = NULL;
+			}
+			dch->tx_idx = 0;
+			if (dch->rx_skb) {
+				dev_kfree_skb(dch->rx_skb);
+				dch->rx_skb = NULL;
+			}
+			test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
+			spin_unlock_irqrestore(&hw->lock, flags);
+#ifdef FIXME
+			if (test_and_clear_bit(FLG_L1_BUSY, &dch->Flags))
+				dchannel_sched_event(&hc->dch, D_CLEARBUSY);
+#endif
+			ret = 0;
+		} else
+			ret = l1_event(dch->l1, hh->prim);
+		break;
+	case MPH_INFORMATION_REQ:
+		hfcsusb_ph_info(hw);
+		ret = 0;
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * Layer 1 callback function
+ */
+static int
+hfc_l1callback(struct dchannel *dch, u_int cmd)
+{
+	struct hfcsusb *hw = dch->hw;
+
+	if (debug & DBG_HFC_CALL_TRACE)
+		printk(KERN_DEBUG "%s: %s cmd 0x%x\n",
+			hw->name, __func__, cmd);
+
+	switch (cmd) {
+	case INFO3_P8:
+	case INFO3_P10:
+	case HW_RESET_REQ:
+	case HW_POWERUP_REQ:
+		break;
+
+	case HW_DEACT_REQ:
+		skb_queue_purge(&dch->squeue);
+		if (dch->tx_skb) {
+			dev_kfree_skb(dch->tx_skb);
+			dch->tx_skb = NULL;
+		}
+		dch->tx_idx = 0;
+		if (dch->rx_skb) {
+			dev_kfree_skb(dch->rx_skb);
+			dch->rx_skb = NULL;
+		}
+		test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
+		break;
+	case PH_ACTIVATE_IND:
+		test_and_set_bit(FLG_ACTIVE, &dch->Flags);
+		_queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
+			GFP_ATOMIC);
+		break;
+	case PH_DEACTIVATE_IND:
+		test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
+		_queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
+			GFP_ATOMIC);
+		break;
+	default:
+		if (dch->debug & DEBUG_HW)
+			printk(KERN_DEBUG "%s: %s: unknown cmd %x\n",
+			hw->name, __func__, cmd);
+		return -1;
+	}
+	hfcsusb_ph_info(hw);
+	return 0;
+}
+
+static int
+open_dchannel(struct hfcsusb *hw, struct mISDNchannel *ch,
+    struct channel_req *rq)
+{
+	int err = 0;
+
+	if (debug & DEBUG_HW_OPEN)
+		printk(KERN_DEBUG "%s: %s: dev(%d) open addr(%i) from %p\n",
+		    hw->name, __func__, hw->dch.dev.id, rq->adr.channel,
+		    __builtin_return_address(0));
+	if (rq->protocol == ISDN_P_NONE)
+		return -EINVAL;
+
+	test_and_clear_bit(FLG_ACTIVE, &hw->dch.Flags);
+	test_and_clear_bit(FLG_ACTIVE, &hw->ech.Flags);
+	hfcsusb_start_endpoint(hw, HFC_CHAN_D);
+
+	/* E-Channel logging */
+	if (rq->adr.channel == 1) {
+		if (hw->fifos[HFCUSB_PCM_RX].pipe) {
+			hfcsusb_start_endpoint(hw, HFC_CHAN_E);
+			set_bit(FLG_ACTIVE, &hw->ech.Flags);
+			_queue_data(&hw->ech.dev.D, PH_ACTIVATE_IND,
+				     MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+		} else
+			return -EINVAL;
+	}
+
+	if (!hw->initdone) {
+		hw->protocol = rq->protocol;
+		if (rq->protocol == ISDN_P_TE_S0) {
+			err = create_l1(&hw->dch, hfc_l1callback);
+			if (err)
+				return err;
+		}
+		setPortMode(hw);
+		ch->protocol = rq->protocol;
+		hw->initdone = 1;
+	} else {
+		if (rq->protocol != ch->protocol)
+			return -EPROTONOSUPPORT;
+	}
+
+	if (((ch->protocol == ISDN_P_NT_S0) && (hw->dch.state == 3)) ||
+	    ((ch->protocol == ISDN_P_TE_S0) && (hw->dch.state == 7)))
+		_queue_data(ch, PH_ACTIVATE_IND, MISDN_ID_ANY,
+		    0, NULL, GFP_KERNEL);
+	rq->ch = ch;
+	if (!try_module_get(THIS_MODULE))
+		printk(KERN_WARNING "%s: %s: cannot get module\n",
+		    hw->name, __func__);
+	return 0;
+}
+
+static int
+open_bchannel(struct hfcsusb *hw, struct channel_req *rq)
+{
+	struct bchannel		*bch;
+
+	if (rq->adr.channel > 2)
+		return -EINVAL;
+	if (rq->protocol == ISDN_P_NONE)
+		return -EINVAL;
+
+	if (debug & DBG_HFC_CALL_TRACE)
+		printk(KERN_DEBUG "%s: %s B%i\n",
+			hw->name, __func__, rq->adr.channel);
+
+	bch = &hw->bch[rq->adr.channel - 1];
+	if (test_and_set_bit(FLG_OPEN, &bch->Flags))
+		return -EBUSY; /* b-channel can be only open once */
+	test_and_clear_bit(FLG_FILLEMPTY, &bch->Flags);
+	bch->ch.protocol = rq->protocol;
+	rq->ch = &bch->ch;
+
+	/* start USB endpoint for bchannel */
+	if (rq->adr.channel  == 1)
+		hfcsusb_start_endpoint(hw, HFC_CHAN_B1);
+	else
+		hfcsusb_start_endpoint(hw, HFC_CHAN_B2);
+
+	if (!try_module_get(THIS_MODULE))
+		printk(KERN_WARNING "%s: %s:cannot get module\n",
+		    hw->name, __func__);
+	return 0;
+}
+
+static int
+channel_ctrl(struct hfcsusb *hw, struct mISDN_ctrl_req *cq)
+{
+	int ret = 0;
+
+	if (debug & DBG_HFC_CALL_TRACE)
+		printk(KERN_DEBUG "%s: %s op(0x%x) channel(0x%x)\n",
+		    hw->name, __func__, (cq->op), (cq->channel));
+
+	switch (cq->op) {
+	case MISDN_CTRL_GETOP:
+		cq->op = MISDN_CTRL_LOOP | MISDN_CTRL_CONNECT |
+			 MISDN_CTRL_DISCONNECT;
+		break;
+	default:
+		printk(KERN_WARNING "%s: %s: unknown Op %x\n",
+			hw->name, __func__, cq->op);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+/*
+ * device control function
+ */
+static int
+hfc_dctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct mISDNdevice	*dev = container_of(ch, struct mISDNdevice, D);
+	struct dchannel		*dch = container_of(dev, struct dchannel, dev);
+	struct hfcsusb		*hw = dch->hw;
+	struct channel_req	*rq;
+	int			err = 0;
+
+	if (dch->debug & DEBUG_HW)
+		printk(KERN_DEBUG "%s: %s: cmd:%x %p\n",
+		    hw->name, __func__, cmd, arg);
+	switch (cmd) {
+	case OPEN_CHANNEL:
+		rq = arg;
+		if ((rq->protocol == ISDN_P_TE_S0) ||
+		    (rq->protocol == ISDN_P_NT_S0))
+			err = open_dchannel(hw, ch, rq);
+		else
+			err = open_bchannel(hw, rq);
+		if (!err)
+			hw->open++;
+		break;
+	case CLOSE_CHANNEL:
+		hw->open--;
+		if (debug & DEBUG_HW_OPEN)
+			printk(KERN_DEBUG
+				"%s: %s: dev(%d) close from %p (open %d)\n",
+				hw->name, __func__, hw->dch.dev.id,
+				__builtin_return_address(0), hw->open);
+		if (!hw->open) {
+			hfcsusb_stop_endpoint(hw, HFC_CHAN_D);
+			if (hw->fifos[HFCUSB_PCM_RX].pipe)
+				hfcsusb_stop_endpoint(hw, HFC_CHAN_E);
+			handle_led(hw, LED_POWER_ON);
+		}
+		module_put(THIS_MODULE);
+		break;
+	case CONTROL_CHANNEL:
+		err = channel_ctrl(hw, arg);
+		break;
+	default:
+		if (dch->debug & DEBUG_HW)
+			printk(KERN_DEBUG "%s: %s: unknown command %x\n",
+				hw->name, __func__, cmd);
+		return -EINVAL;
+	}
+	return err;
+}
+
+/*
+ * S0 TE state change event handler
+ */
+static void
+ph_state_te(struct dchannel *dch)
+{
+	struct hfcsusb *hw = dch->hw;
+
+	if (debug & DEBUG_HW) {
+		if (dch->state <= HFC_MAX_TE_LAYER1_STATE)
+			printk(KERN_DEBUG "%s: %s: %s\n", hw->name, __func__,
+			    HFC_TE_LAYER1_STATES[dch->state]);
+		else
+			printk(KERN_DEBUG "%s: %s: TE F%d\n",
+			    hw->name, __func__, dch->state);
+	}
+
+	switch (dch->state) {
+	case 0:
+		l1_event(dch->l1, HW_RESET_IND);
+		break;
+	case 3:
+		l1_event(dch->l1, HW_DEACT_IND);
+		break;
+	case 5:
+	case 8:
+		l1_event(dch->l1, ANYSIGNAL);
+		break;
+	case 6:
+		l1_event(dch->l1, INFO2);
+		break;
+	case 7:
+		l1_event(dch->l1, INFO4_P8);
+		break;
+	}
+	if (dch->state == 7)
+		handle_led(hw, LED_S0_ON);
+	else
+		handle_led(hw, LED_S0_OFF);
+}
+
+/*
+ * S0 NT state change event handler
+ */
+static void
+ph_state_nt(struct dchannel *dch)
+{
+	struct hfcsusb *hw = dch->hw;
+
+	if (debug & DEBUG_HW) {
+		if (dch->state <= HFC_MAX_NT_LAYER1_STATE)
+			printk(KERN_DEBUG "%s: %s: %s\n",
+			    hw->name, __func__,
+			    HFC_NT_LAYER1_STATES[dch->state]);
+
+		else
+			printk(KERN_INFO DRIVER_NAME "%s: %s: NT G%d\n",
+			    hw->name, __func__, dch->state);
+	}
+
+	switch (dch->state) {
+	case (1):
+		test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
+		test_and_clear_bit(FLG_L2_ACTIVATED, &dch->Flags);
+		hw->nt_timer = 0;
+		hw->timers &= ~NT_ACTIVATION_TIMER;
+		handle_led(hw, LED_S0_OFF);
+		break;
+
+	case (2):
+		if (hw->nt_timer < 0) {
+			hw->nt_timer = 0;
+			hw->timers &= ~NT_ACTIVATION_TIMER;
+			hfcsusb_ph_command(dch->hw, HFC_L1_DEACTIVATE_NT);
+		} else {
+			hw->timers |= NT_ACTIVATION_TIMER;
+			hw->nt_timer = NT_T1_COUNT;
+			/* allow G2 -> G3 transition */
+			write_reg(hw, HFCUSB_STATES, 2 | HFCUSB_NT_G2_G3);
+		}
+		break;
+	case (3):
+		hw->nt_timer = 0;
+		hw->timers &= ~NT_ACTIVATION_TIMER;
+		test_and_set_bit(FLG_ACTIVE, &dch->Flags);
+		_queue_data(&dch->dev.D, PH_ACTIVATE_IND,
+			MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+		handle_led(hw, LED_S0_ON);
+		break;
+	case (4):
+		hw->nt_timer = 0;
+		hw->timers &= ~NT_ACTIVATION_TIMER;
+		break;
+	default:
+		break;
+	}
+	hfcsusb_ph_info(hw);
+}
+
+static void
+ph_state(struct dchannel *dch)
+{
+	struct hfcsusb *hw = dch->hw;
+
+	if (hw->protocol == ISDN_P_NT_S0)
+		ph_state_nt(dch);
+	else if (hw->protocol == ISDN_P_TE_S0)
+		ph_state_te(dch);
+}
+
+/*
+ * disable/enable BChannel for desired protocoll
+ */
+static int
+hfcsusb_setup_bch(struct bchannel *bch, int protocol)
+{
+	struct hfcsusb *hw = bch->hw;
+	__u8 conhdlc, sctrl, sctrl_r;
+
+	if (debug & DEBUG_HW)
+		printk(KERN_DEBUG "%s: %s: protocol %x-->%x B%d\n",
+		    hw->name, __func__, bch->state, protocol,
+		    bch->nr);
+
+	/* setup val for CON_HDLC */
+	conhdlc = 0;
+	if (protocol > ISDN_P_NONE)
+		conhdlc = 8;	/* enable FIFO */
+
+	switch (protocol) {
+	case (-1):	/* used for init */
+		bch->state = -1;
+		/* fall trough */
+	case (ISDN_P_NONE):
+		if (bch->state == ISDN_P_NONE)
+			return 0; /* already in idle state */
+		bch->state = ISDN_P_NONE;
+		clear_bit(FLG_HDLC, &bch->Flags);
+		clear_bit(FLG_TRANSPARENT, &bch->Flags);
+		break;
+	case (ISDN_P_B_RAW):
+		conhdlc |= 2;
+		bch->state = protocol;
+		set_bit(FLG_TRANSPARENT, &bch->Flags);
+		break;
+	case (ISDN_P_B_HDLC):
+		bch->state = protocol;
+		set_bit(FLG_HDLC, &bch->Flags);
+		break;
+	default:
+		if (debug & DEBUG_HW)
+			printk(KERN_DEBUG "%s: %s: prot not known %x\n",
+				hw->name, __func__, protocol);
+		return -ENOPROTOOPT;
+	}
+
+	if (protocol >= ISDN_P_NONE) {
+		write_reg(hw, HFCUSB_FIFO, (bch->nr == 1) ? 0 : 2);
+		write_reg(hw, HFCUSB_CON_HDLC, conhdlc);
+		write_reg(hw, HFCUSB_INC_RES_F, 2);
+		write_reg(hw, HFCUSB_FIFO, (bch->nr == 1) ? 1 : 3);
+		write_reg(hw, HFCUSB_CON_HDLC, conhdlc);
+		write_reg(hw, HFCUSB_INC_RES_F, 2);
+
+		sctrl = 0x40 + ((hw->protocol == ISDN_P_TE_S0) ? 0x00 : 0x04);
+		sctrl_r = 0x0;
+		if (test_bit(FLG_ACTIVE, &hw->bch[0].Flags)) {
+			sctrl |= 1;
+			sctrl_r |= 1;
+		}
+		if (test_bit(FLG_ACTIVE, &hw->bch[1].Flags)) {
+			sctrl |= 2;
+			sctrl_r |= 2;
+		}
+		write_reg(hw, HFCUSB_SCTRL, sctrl);
+		write_reg(hw, HFCUSB_SCTRL_R, sctrl_r);
+
+		if (protocol > ISDN_P_NONE)
+			handle_led(hw, (bch->nr == 1) ? LED_B1_ON : LED_B2_ON);
+		else
+			handle_led(hw, (bch->nr == 1) ? LED_B1_OFF :
+				LED_B2_OFF);
+	}
+	hfcsusb_ph_info(hw);
+	return 0;
+}
+
+static void
+hfcsusb_ph_command(struct hfcsusb *hw, u_char command)
+{
+	if (debug & DEBUG_HW)
+		printk(KERN_DEBUG "%s: %s: %x\n",
+		   hw->name, __func__, command);
+
+	switch (command) {
+	case HFC_L1_ACTIVATE_TE:
+		/* force sending sending INFO1 */
+		write_reg(hw, HFCUSB_STATES, 0x14);
+		/* start l1 activation */
+		write_reg(hw, HFCUSB_STATES, 0x04);
+		break;
+
+	case HFC_L1_FORCE_DEACTIVATE_TE:
+		write_reg(hw, HFCUSB_STATES, 0x10);
+		write_reg(hw, HFCUSB_STATES, 0x03);
+		break;
+
+	case HFC_L1_ACTIVATE_NT:
+		if (hw->dch.state == 3)
+			_queue_data(&hw->dch.dev.D, PH_ACTIVATE_IND,
+				MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+		else
+			write_reg(hw, HFCUSB_STATES, HFCUSB_ACTIVATE |
+				HFCUSB_DO_ACTION | HFCUSB_NT_G2_G3);
+		break;
+
+	case HFC_L1_DEACTIVATE_NT:
+		write_reg(hw, HFCUSB_STATES,
+			HFCUSB_DO_ACTION);
+		break;
+	}
+}
+
+/*
+ * Layer 1 B-channel hardware access
+ */
+static int
+channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq)
+{
+	int	ret = 0;
+
+	switch (cq->op) {
+	case MISDN_CTRL_GETOP:
+		cq->op = MISDN_CTRL_FILL_EMPTY;
+		break;
+	case MISDN_CTRL_FILL_EMPTY: /* fill fifo, if empty */
+		test_and_set_bit(FLG_FILLEMPTY, &bch->Flags);
+		if (debug & DEBUG_HW_OPEN)
+			printk(KERN_DEBUG "%s: FILL_EMPTY request (nr=%d "
+				"off=%d)\n", __func__, bch->nr, !!cq->p1);
+		break;
+	default:
+		printk(KERN_WARNING "%s: unknown Op %x\n", __func__, cq->op);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+/* collect data from incoming interrupt or isochron USB data */
+static void
+hfcsusb_rx_frame(struct usb_fifo *fifo, __u8 *data, unsigned int len,
+	int finish)
+{
+	struct hfcsusb	*hw = fifo->hw;
+	struct sk_buff	*rx_skb = NULL;
+	int		maxlen = 0;
+	int		fifon = fifo->fifonum;
+	int		i;
+	int		hdlc = 0;
+
+	if (debug & DBG_HFC_CALL_TRACE)
+		printk(KERN_DEBUG "%s: %s: fifo(%i) len(%i) "
+		    "dch(%p) bch(%p) ech(%p)\n",
+		    hw->name, __func__, fifon, len,
+		    fifo->dch, fifo->bch, fifo->ech);
+
+	if (!len)
+		return;
+
+	if ((!!fifo->dch + !!fifo->bch + !!fifo->ech) != 1) {
+		printk(KERN_DEBUG "%s: %s: undefined channel\n",
+		       hw->name, __func__);
+		return;
+	}
+
+	spin_lock(&hw->lock);
+	if (fifo->dch) {
+		rx_skb = fifo->dch->rx_skb;
+		maxlen = fifo->dch->maxlen;
+		hdlc = 1;
+	}
+	if (fifo->bch) {
+		rx_skb = fifo->bch->rx_skb;
+		maxlen = fifo->bch->maxlen;
+		hdlc = test_bit(FLG_HDLC, &fifo->bch->Flags);
+	}
+	if (fifo->ech) {
+		rx_skb = fifo->ech->rx_skb;
+		maxlen = fifo->ech->maxlen;
+		hdlc = 1;
+	}
+
+	if (!rx_skb) {
+		rx_skb = mI_alloc_skb(maxlen, GFP_ATOMIC);
+		if (rx_skb) {
+			if (fifo->dch)
+				fifo->dch->rx_skb = rx_skb;
+			if (fifo->bch)
+				fifo->bch->rx_skb = rx_skb;
+			if (fifo->ech)
+				fifo->ech->rx_skb = rx_skb;
+			skb_trim(rx_skb, 0);
+		} else {
+			printk(KERN_DEBUG "%s: %s: No mem for rx_skb\n",
+			    hw->name, __func__);
+			spin_unlock(&hw->lock);
+			return;
+		}
+	}
+
+	if (fifo->dch || fifo->ech) {
+		/* D/E-Channel SKB range check */
+		if ((rx_skb->len + len) >= MAX_DFRAME_LEN_L1) {
+			printk(KERN_DEBUG "%s: %s: sbk mem exceeded "
+			    "for fifo(%d) HFCUSB_D_RX\n",
+			    hw->name, __func__, fifon);
+			skb_trim(rx_skb, 0);
+			spin_unlock(&hw->lock);
+			return;
+		}
+	} else if (fifo->bch) {
+		/* B-Channel SKB range check */
+		if ((rx_skb->len + len) >= (MAX_BCH_SIZE + 3)) {
+			printk(KERN_DEBUG "%s: %s: sbk mem exceeded "
+			    "for fifo(%d) HFCUSB_B_RX\n",
+			    hw->name, __func__, fifon);
+			skb_trim(rx_skb, 0);
+			spin_unlock(&hw->lock);
+			return;
+		}
+	}
+
+	memcpy(skb_put(rx_skb, len), data, len);
+
+	if (hdlc) {
+		/* we have a complete hdlc packet */
+		if (finish) {
+			if ((rx_skb->len > 3) &&
+			   (!(rx_skb->data[rx_skb->len - 1]))) {
+				if (debug & DBG_HFC_FIFO_VERBOSE) {
+					printk(KERN_DEBUG "%s: %s: fifon(%i)"
+					    " new RX len(%i): ",
+					    hw->name, __func__, fifon,
+					    rx_skb->len);
+					i = 0;
+					while (i < rx_skb->len)
+						printk("%02x ",
+						    rx_skb->data[i++]);
+					printk("\n");
+				}
+
+				/* remove CRC & status */
+				skb_trim(rx_skb, rx_skb->len - 3);
+
+				if (fifo->dch)
+					recv_Dchannel(fifo->dch);
+				if (fifo->bch)
+					recv_Bchannel(fifo->bch);
+				if (fifo->ech)
+					recv_Echannel(fifo->ech,
+						     &hw->dch);
+			} else {
+				if (debug & DBG_HFC_FIFO_VERBOSE) {
+					printk(KERN_DEBUG
+					    "%s: CRC or minlen ERROR fifon(%i) "
+					    "RX len(%i): ",
+					    hw->name, fifon, rx_skb->len);
+					i = 0;
+					while (i < rx_skb->len)
+						printk("%02x ",
+						    rx_skb->data[i++]);
+					printk("\n");
+				}
+				skb_trim(rx_skb, 0);
+			}
+		}
+	} else {
+		/* deliver transparent data to layer2 */
+		if (rx_skb->len >= poll)
+			recv_Bchannel(fifo->bch);
+	}
+	spin_unlock(&hw->lock);
+}
+
+void
+fill_isoc_urb(struct urb *urb, struct usb_device *dev, unsigned int pipe,
+	      void *buf, int num_packets, int packet_size, int interval,
+	      usb_complete_t complete, void *context)
+{
+	int k;
+
+	usb_fill_bulk_urb(urb, dev, pipe, buf, packet_size * num_packets,
+	    complete, context);
+
+	urb->number_of_packets = num_packets;
+	urb->transfer_flags = URB_ISO_ASAP;
+	urb->actual_length = 0;
+	urb->interval = interval;
+
+	for (k = 0; k < num_packets; k++) {
+		urb->iso_frame_desc[k].offset = packet_size * k;
+		urb->iso_frame_desc[k].length = packet_size;
+		urb->iso_frame_desc[k].actual_length = 0;
+	}
+}
+
+/* receive completion routine for all ISO tx fifos   */
+static void
+rx_iso_complete(struct urb *urb)
+{
+	struct iso_urb *context_iso_urb = (struct iso_urb *) urb->context;
+	struct usb_fifo *fifo = context_iso_urb->owner_fifo;
+	struct hfcsusb *hw = fifo->hw;
+	int k, len, errcode, offset, num_isoc_packets, fifon, maxlen,
+	    status, iso_status, i;
+	__u8 *buf;
+	static __u8 eof[8];
+	__u8 s0_state;
+
+	fifon = fifo->fifonum;
+	status = urb->status;
+
+	spin_lock(&hw->lock);
+	if (fifo->stop_gracefull) {
+		fifo->stop_gracefull = 0;
+		fifo->active = 0;
+		spin_unlock(&hw->lock);
+		return;
+	}
+	spin_unlock(&hw->lock);
+
+	/*
+	 * ISO transfer only partially completed,
+	 * look at individual frame status for details
+	 */
+	if (status == -EXDEV) {
+		if (debug & DEBUG_HW)
+			printk(KERN_DEBUG "%s: %s: with -EXDEV "
+			    "urb->status %d, fifonum %d\n",
+			    hw->name, __func__,  status, fifon);
+
+		/* clear status, so go on with ISO transfers */
+		status = 0;
+	}
+
+	s0_state = 0;
+	if (fifo->active && !status) {
+		num_isoc_packets = iso_packets[fifon];
+		maxlen = fifo->usb_packet_maxlen;
+
+		for (k = 0; k < num_isoc_packets; ++k) {
+			len = urb->iso_frame_desc[k].actual_length;
+			offset = urb->iso_frame_desc[k].offset;
+			buf = context_iso_urb->buffer + offset;
+			iso_status = urb->iso_frame_desc[k].status;
+
+			if (iso_status && (debug & DBG_HFC_FIFO_VERBOSE)) {
+				printk(KERN_DEBUG "%s: %s: "
+				    "ISO packet %i, status: %i\n",
+				    hw->name, __func__, k, iso_status);
+			}
+
+			/* USB data log for every D ISO in */
+			if ((fifon == HFCUSB_D_RX) &&
+			    (debug & DBG_HFC_USB_VERBOSE)) {
+				printk(KERN_DEBUG
+				    "%s: %s: %d (%d/%d) len(%d) ",
+				    hw->name, __func__, urb->start_frame,
+				    k, num_isoc_packets-1,
+				    len);
+				for (i = 0; i < len; i++)
+					printk("%x ", buf[i]);
+				printk("\n");
+			}
+
+			if (!iso_status) {
+				if (fifo->last_urblen != maxlen) {
+					/*
+					 * save fifo fill-level threshold bits
+					 * to use them later in TX ISO URB
+					 * completions
+					 */
+					hw->threshold_mask = buf[1];
+
+					if (fifon == HFCUSB_D_RX)
+						s0_state = (buf[0] >> 4);
+
+					eof[fifon] = buf[0] & 1;
+					if (len > 2)
+						hfcsusb_rx_frame(fifo, buf + 2,
+							len - 2, (len < maxlen)
+							? eof[fifon] : 0);
+				} else
+					hfcsusb_rx_frame(fifo, buf, len,
+						(len < maxlen) ?
+						eof[fifon] : 0);
+				fifo->last_urblen = len;
+			}
+		}
+
+		/* signal S0 layer1 state change */
+		if ((s0_state) && (hw->initdone) &&
+		    (s0_state != hw->dch.state)) {
+			hw->dch.state = s0_state;
+			schedule_event(&hw->dch, FLG_PHCHANGE);
+		}
+
+		fill_isoc_urb(urb, fifo->hw->dev, fifo->pipe,
+			      context_iso_urb->buffer, num_isoc_packets,
+			      fifo->usb_packet_maxlen, fifo->intervall,
+			      (usb_complete_t)rx_iso_complete, urb->context);
+		errcode = usb_submit_urb(urb, GFP_ATOMIC);
+		if (errcode < 0) {
+			if (debug & DEBUG_HW)
+				printk(KERN_DEBUG "%s: %s: error submitting "
+				    "ISO URB: %d\n",
+				    hw->name, __func__, errcode);
+		}
+	} else {
+		if (status && (debug & DBG_HFC_URB_INFO))
+			printk(KERN_DEBUG "%s: %s: rx_iso_complete : "
+			    "urb->status %d, fifonum %d\n",
+			    hw->name, __func__, status, fifon);
+	}
+}
+
+/* receive completion routine for all interrupt rx fifos */
+static void
+rx_int_complete(struct urb *urb)
+{
+	int len, status, i;
+	__u8 *buf, maxlen, fifon;
+	struct usb_fifo *fifo = (struct usb_fifo *) urb->context;
+	struct hfcsusb *hw = fifo->hw;
+	static __u8 eof[8];
+
+	spin_lock(&hw->lock);
+	if (fifo->stop_gracefull) {
+		fifo->stop_gracefull = 0;
+		fifo->active = 0;
+		spin_unlock(&hw->lock);
+		return;
+	}
+	spin_unlock(&hw->lock);
+
+	fifon = fifo->fifonum;
+	if ((!fifo->active) || (urb->status)) {
+		if (debug & DBG_HFC_URB_ERROR)
+			printk(KERN_DEBUG
+			    "%s: %s: RX-Fifo %i is going down (%i)\n",
+			    hw->name, __func__, fifon, urb->status);
+
+		fifo->urb->interval = 0; /* cancel automatic rescheduling */
+		return;
+	}
+	len = urb->actual_length;
+	buf = fifo->buffer;
+	maxlen = fifo->usb_packet_maxlen;
+
+	/* USB data log for every D INT in */
+	if ((fifon == HFCUSB_D_RX) && (debug & DBG_HFC_USB_VERBOSE)) {
+		printk(KERN_DEBUG "%s: %s: D RX INT len(%d) ",
+		    hw->name, __func__, len);
+		for (i = 0; i < len; i++)
+			printk("%02x ", buf[i]);
+		printk("\n");
+	}
+
+	if (fifo->last_urblen != fifo->usb_packet_maxlen) {
+		/* the threshold mask is in the 2nd status byte */
+		hw->threshold_mask = buf[1];
+
+		/* signal S0 layer1 state change */
+		if (hw->initdone && ((buf[0] >> 4) != hw->dch.state)) {
+			hw->dch.state = (buf[0] >> 4);
+			schedule_event(&hw->dch, FLG_PHCHANGE);
+		}
+
+		eof[fifon] = buf[0] & 1;
+		/* if we have more than the 2 status bytes -> collect data */
+		if (len > 2)
+			hfcsusb_rx_frame(fifo, buf + 2,
+			   urb->actual_length - 2,
+			   (len < maxlen) ? eof[fifon] : 0);
+	} else {
+		hfcsusb_rx_frame(fifo, buf, urb->actual_length,
+				 (len < maxlen) ? eof[fifon] : 0);
+	}
+	fifo->last_urblen = urb->actual_length;
+
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status) {
+		if (debug & DEBUG_HW)
+			printk(KERN_DEBUG "%s: %s: error resubmitting USB\n",
+			    hw->name, __func__);
+	}
+}
+
+/* transmit completion routine for all ISO tx fifos */
+static void
+tx_iso_complete(struct urb *urb)
+{
+	struct iso_urb *context_iso_urb = (struct iso_urb *) urb->context;
+	struct usb_fifo *fifo = context_iso_urb->owner_fifo;
+	struct hfcsusb *hw = fifo->hw;
+	struct sk_buff *tx_skb;
+	int k, tx_offset, num_isoc_packets, sink, remain, current_len,
+	    errcode, hdlc, i;
+	int *tx_idx;
+	int frame_complete, fifon, status;
+	__u8 threshbit;
+
+	spin_lock(&hw->lock);
+	if (fifo->stop_gracefull) {
+		fifo->stop_gracefull = 0;
+		fifo->active = 0;
+		spin_unlock(&hw->lock);
+		return;
+	}
+
+	if (fifo->dch) {
+		tx_skb = fifo->dch->tx_skb;
+		tx_idx = &fifo->dch->tx_idx;
+		hdlc = 1;
+	} else if (fifo->bch) {
+		tx_skb = fifo->bch->tx_skb;
+		tx_idx = &fifo->bch->tx_idx;
+		hdlc = test_bit(FLG_HDLC, &fifo->bch->Flags);
+	} else {
+		printk(KERN_DEBUG "%s: %s: neither BCH nor DCH\n",
+		    hw->name, __func__);
+		spin_unlock(&hw->lock);
+		return;
+	}
+
+	fifon = fifo->fifonum;
+	status = urb->status;
+
+	tx_offset = 0;
+
+	/*
+	 * ISO transfer only partially completed,
+	 * look at individual frame status for details
+	 */
+	if (status == -EXDEV) {
+		if (debug & DBG_HFC_URB_ERROR)
+			printk(KERN_DEBUG "%s: %s: "
+			    "-EXDEV (%i) fifon (%d)\n",
+			    hw->name, __func__, status, fifon);
+
+		/* clear status, so go on with ISO transfers */
+		status = 0;
+	}
+
+	if (fifo->active && !status) {
+		/* is FifoFull-threshold set for our channel? */
+		threshbit = (hw->threshold_mask & (1 << fifon));
+		num_isoc_packets = iso_packets[fifon];
+
+		/* predict dataflow to avoid fifo overflow */
+		if (fifon >= HFCUSB_D_TX)
+			sink = (threshbit) ? SINK_DMIN : SINK_DMAX;
+		else
+			sink = (threshbit) ? SINK_MIN : SINK_MAX;
+		fill_isoc_urb(urb, fifo->hw->dev, fifo->pipe,
+			      context_iso_urb->buffer, num_isoc_packets,
+			      fifo->usb_packet_maxlen, fifo->intervall,
+			      (usb_complete_t)tx_iso_complete, urb->context);
+		memset(context_iso_urb->buffer, 0,
+		       sizeof(context_iso_urb->buffer));
+		frame_complete = 0;
+
+		for (k = 0; k < num_isoc_packets; ++k) {
+			/* analyze tx success of previous ISO packets */
+			if (debug & DBG_HFC_URB_ERROR) {
+				errcode = urb->iso_frame_desc[k].status;
+				if (errcode) {
+					printk(KERN_DEBUG "%s: %s: "
+					    "ISO packet %i, status: %i\n",
+					     hw->name, __func__, k, errcode);
+				}
+			}
+
+			/* Generate next ISO Packets */
+			if (tx_skb)
+				remain = tx_skb->len - *tx_idx;
+			else
+				remain = 0;
+
+			if (remain > 0) {
+				fifo->bit_line -= sink;
+				current_len = (0 - fifo->bit_line) / 8;
+				if (current_len > 14)
+					current_len = 14;
+				if (current_len < 0)
+					current_len = 0;
+				if (remain < current_len)
+					current_len = remain;
+
+				/* how much bit do we put on the line? */
+				fifo->bit_line += current_len * 8;
+
+				context_iso_urb->buffer[tx_offset] = 0;
+				if (current_len == remain) {
+					if (hdlc) {
+						/* signal frame completion */
+						context_iso_urb->
+						    buffer[tx_offset] = 1;
+						/* add 2 byte flags and 16bit
+						 * CRC at end of ISDN frame */
+						fifo->bit_line += 32;
+					}
+					frame_complete = 1;
+				}
+
+				/* copy tx data to iso-urb buffer */
+				memcpy(context_iso_urb->buffer + tx_offset + 1,
+				       (tx_skb->data + *tx_idx), current_len);
+				*tx_idx += current_len;
+
+				urb->iso_frame_desc[k].offset = tx_offset;
+				urb->iso_frame_desc[k].length = current_len + 1;
+
+				/* USB data log for every D ISO out */
+				if ((fifon == HFCUSB_D_RX) &&
+				    (debug & DBG_HFC_USB_VERBOSE)) {
+					printk(KERN_DEBUG
+					    "%s: %s (%d/%d) offs(%d) len(%d) ",
+					    hw->name, __func__,
+					    k, num_isoc_packets-1,
+					    urb->iso_frame_desc[k].offset,
+					    urb->iso_frame_desc[k].length);
+
+					for (i = urb->iso_frame_desc[k].offset;
+					     i < (urb->iso_frame_desc[k].offset
+					     + urb->iso_frame_desc[k].length);
+					     i++)
+						printk("%x ",
+						    context_iso_urb->buffer[i]);
+
+					printk(" skb->len(%i) tx-idx(%d)\n",
+					    tx_skb->len, *tx_idx);
+				}
+
+				tx_offset += (current_len + 1);
+			} else {
+				urb->iso_frame_desc[k].offset = tx_offset++;
+				urb->iso_frame_desc[k].length = 1;
+				/* we lower data margin every msec */
+				fifo->bit_line -= sink;
+				if (fifo->bit_line < BITLINE_INF)
+					fifo->bit_line = BITLINE_INF;
+			}
+
+			if (frame_complete) {
+				frame_complete = 0;
+
+				if (debug & DBG_HFC_FIFO_VERBOSE) {
+					printk(KERN_DEBUG  "%s: %s: "
+					    "fifon(%i) new TX len(%i): ",
+					    hw->name, __func__,
+					    fifon, tx_skb->len);
+					i = 0;
+					while (i < tx_skb->len)
+						printk("%02x ",
+						    tx_skb->data[i++]);
+					printk("\n");
+				}
+
+				dev_kfree_skb(tx_skb);
+				tx_skb = NULL;
+				if (fifo->dch && get_next_dframe(fifo->dch))
+					tx_skb = fifo->dch->tx_skb;
+				else if (fifo->bch &&
+				    get_next_bframe(fifo->bch)) {
+					if (test_bit(FLG_TRANSPARENT,
+					    &fifo->bch->Flags))
+						confirm_Bsend(fifo->bch);
+					tx_skb = fifo->bch->tx_skb;
+				}
+			}
+		}
+		errcode = usb_submit_urb(urb, GFP_ATOMIC);
+		if (errcode < 0) {
+			if (debug & DEBUG_HW)
+				printk(KERN_DEBUG
+				    "%s: %s: error submitting ISO URB: %d \n",
+				    hw->name, __func__, errcode);
+		}
+
+		/*
+		 * abuse DChannel tx iso completion to trigger NT mode state
+		 * changes tx_iso_complete is assumed to be called every
+		 * fifo->intervall (ms)
+		 */
+		if ((fifon == HFCUSB_D_TX) && (hw->protocol == ISDN_P_NT_S0)
+		    && (hw->timers & NT_ACTIVATION_TIMER)) {
+			if ((--hw->nt_timer) < 0)
+				schedule_event(&hw->dch, FLG_PHCHANGE);
+		}
+
+	} else {
+		if (status && (debug & DBG_HFC_URB_ERROR))
+			printk(KERN_DEBUG  "%s: %s: urb->status %s (%i)"
+			    "fifonum=%d\n",
+			    hw->name, __func__,
+			    symbolic(urb_errlist, status), status, fifon);
+	}
+	spin_unlock(&hw->lock);
+}
+
+/*
+ * allocs urbs and start isoc transfer with two pending urbs to avoid
+ * gaps in the transfer chain
+ */
+static int
+start_isoc_chain(struct usb_fifo *fifo, int num_packets_per_urb,
+		 usb_complete_t complete, int packet_size)
+{
+	struct hfcsusb *hw = fifo->hw;
+	int i, k, errcode;
+
+	if (debug)
+		printk(KERN_DEBUG "%s: %s: fifo %i\n",
+		    hw->name, __func__, fifo->fifonum);
+
+	/* allocate Memory for Iso out Urbs */
+	for (i = 0; i < 2; i++) {
+		if (!(fifo->iso[i].urb)) {
+			fifo->iso[i].urb =
+			    usb_alloc_urb(num_packets_per_urb, GFP_KERNEL);
+			if (!(fifo->iso[i].urb)) {
+				printk(KERN_DEBUG
+				    "%s: %s: alloc urb for fifo %i failed",
+				    hw->name, __func__, fifo->fifonum);
+			}
+			fifo->iso[i].owner_fifo = (struct usb_fifo *) fifo;
+			fifo->iso[i].indx = i;
+
+			/* Init the first iso */
+			if (ISO_BUFFER_SIZE >=
+			    (fifo->usb_packet_maxlen *
+			     num_packets_per_urb)) {
+				fill_isoc_urb(fifo->iso[i].urb,
+				    fifo->hw->dev, fifo->pipe,
+				    fifo->iso[i].buffer,
+				    num_packets_per_urb,
+				    fifo->usb_packet_maxlen,
+				    fifo->intervall, complete,
+				    &fifo->iso[i]);
+				memset(fifo->iso[i].buffer, 0,
+				       sizeof(fifo->iso[i].buffer));
+
+				for (k = 0; k < num_packets_per_urb; k++) {
+					fifo->iso[i].urb->
+					    iso_frame_desc[k].offset =
+					    k * packet_size;
+					fifo->iso[i].urb->
+					    iso_frame_desc[k].length =
+					    packet_size;
+				}
+			} else {
+				printk(KERN_DEBUG
+				    "%s: %s: ISO Buffer size to small!\n",
+				    hw->name, __func__);
+			}
+		}
+		fifo->bit_line = BITLINE_INF;
+
+		errcode = usb_submit_urb(fifo->iso[i].urb, GFP_KERNEL);
+		fifo->active = (errcode >= 0) ? 1 : 0;
+		fifo->stop_gracefull = 0;
+		if (errcode < 0) {
+			printk(KERN_DEBUG "%s: %s: %s URB nr:%d\n",
+			    hw->name, __func__,
+			    symbolic(urb_errlist, errcode), i);
+		}
+	}
+	return fifo->active;
+}
+
+static void
+stop_iso_gracefull(struct usb_fifo *fifo)
+{
+	struct hfcsusb *hw = fifo->hw;
+	int i, timeout;
+	u_long flags;
+
+	for (i = 0; i < 2; i++) {
+		spin_lock_irqsave(&hw->lock, flags);
+		if (debug)
+			printk(KERN_DEBUG "%s: %s for fifo %i.%i\n",
+			       hw->name, __func__, fifo->fifonum, i);
+		fifo->stop_gracefull = 1;
+		spin_unlock_irqrestore(&hw->lock, flags);
+	}
+
+	for (i = 0; i < 2; i++) {
+		timeout = 3;
+		while (fifo->stop_gracefull && timeout--)
+			schedule_timeout_interruptible((HZ/1000)*16);
+		if (debug && fifo->stop_gracefull)
+			printk(KERN_DEBUG "%s: ERROR %s for fifo %i.%i\n",
+				hw->name, __func__, fifo->fifonum, i);
+	}
+}
+
+static void
+stop_int_gracefull(struct usb_fifo *fifo)
+{
+	struct hfcsusb *hw = fifo->hw;
+	int timeout;
+	u_long flags;
+
+	spin_lock_irqsave(&hw->lock, flags);
+	if (debug)
+		printk(KERN_DEBUG "%s: %s for fifo %i\n",
+		       hw->name, __func__, fifo->fifonum);
+	fifo->stop_gracefull = 1;
+	spin_unlock_irqrestore(&hw->lock, flags);
+
+	timeout = 3;
+	while (fifo->stop_gracefull && timeout--)
+		schedule_timeout_interruptible((HZ/1000)*3);
+	if (debug && fifo->stop_gracefull)
+		printk(KERN_DEBUG "%s: ERROR %s for fifo %i\n",
+		       hw->name, __func__, fifo->fifonum);
+}
+
+/* start the interrupt transfer for the given fifo */
+static void
+start_int_fifo(struct usb_fifo *fifo)
+{
+	struct hfcsusb *hw = fifo->hw;
+	int errcode;
+
+	if (debug)
+		printk(KERN_DEBUG "%s: %s: INT IN fifo:%d\n",
+		    hw->name, __func__, fifo->fifonum);
+
+	if (!fifo->urb) {
+		fifo->urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!fifo->urb)
+			return;
+	}
+	usb_fill_int_urb(fifo->urb, fifo->hw->dev, fifo->pipe,
+	    fifo->buffer, fifo->usb_packet_maxlen,
+	    (usb_complete_t)rx_int_complete, fifo, fifo->intervall);
+	fifo->active = 1;
+	fifo->stop_gracefull = 0;
+	errcode = usb_submit_urb(fifo->urb, GFP_KERNEL);
+	if (errcode) {
+		printk(KERN_DEBUG "%s: %s: submit URB: status:%i\n",
+		    hw->name, __func__, errcode);
+		fifo->active = 0;
+	}
+}
+
+static void
+setPortMode(struct hfcsusb *hw)
+{
+	if (debug & DEBUG_HW)
+		printk(KERN_DEBUG "%s: %s %s\n", hw->name, __func__,
+		   (hw->protocol == ISDN_P_TE_S0) ? "TE" : "NT");
+
+	if (hw->protocol == ISDN_P_TE_S0) {
+		write_reg(hw, HFCUSB_SCTRL, 0x40);
+		write_reg(hw, HFCUSB_SCTRL_E, 0x00);
+		write_reg(hw, HFCUSB_CLKDEL, CLKDEL_TE);
+		write_reg(hw, HFCUSB_STATES, 3 | 0x10);
+		write_reg(hw, HFCUSB_STATES, 3);
+	} else {
+		write_reg(hw, HFCUSB_SCTRL, 0x44);
+		write_reg(hw, HFCUSB_SCTRL_E, 0x09);
+		write_reg(hw, HFCUSB_CLKDEL, CLKDEL_NT);
+		write_reg(hw, HFCUSB_STATES, 1 | 0x10);
+		write_reg(hw, HFCUSB_STATES, 1);
+	}
+}
+
+static void
+reset_hfcsusb(struct hfcsusb *hw)
+{
+	struct usb_fifo *fifo;
+	int i;
+
+	if (debug & DEBUG_HW)
+		printk(KERN_DEBUG "%s: %s\n", hw->name, __func__);
+
+	/* do Chip reset */
+	write_reg(hw, HFCUSB_CIRM, 8);
+
+	/* aux = output, reset off */
+	write_reg(hw, HFCUSB_CIRM, 0x10);
+
+	/* set USB_SIZE to match the wMaxPacketSize for INT or BULK transfers */
+	write_reg(hw, HFCUSB_USB_SIZE, (hw->packet_size / 8) |
+	    ((hw->packet_size / 8) << 4));
+
+	/* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */
+	write_reg(hw, HFCUSB_USB_SIZE_I, hw->iso_packet_size);
+
+	/* enable PCM/GCI master mode */
+	write_reg(hw, HFCUSB_MST_MODE1, 0);	/* set default values */
+	write_reg(hw, HFCUSB_MST_MODE0, 1);	/* enable master mode */
+
+	/* init the fifos */
+	write_reg(hw, HFCUSB_F_THRES,
+	    (HFCUSB_TX_THRESHOLD / 8) | ((HFCUSB_RX_THRESHOLD / 8) << 4));
+
+	fifo = hw->fifos;
+	for (i = 0; i < HFCUSB_NUM_FIFOS; i++) {
+		write_reg(hw, HFCUSB_FIFO, i);	/* select the desired fifo */
+		fifo[i].max_size =
+		    (i <= HFCUSB_B2_RX) ? MAX_BCH_SIZE : MAX_DFRAME_LEN;
+		fifo[i].last_urblen = 0;
+
+		/* set 2 bit for D- & E-channel */
+		write_reg(hw, HFCUSB_HDLC_PAR, ((i <= HFCUSB_B2_RX) ? 0 : 2));
+
+		/* enable all fifos */
+		if (i == HFCUSB_D_TX)
+			write_reg(hw, HFCUSB_CON_HDLC,
+			    (hw->protocol == ISDN_P_NT_S0) ? 0x08 : 0x09);
+		else
+			write_reg(hw, HFCUSB_CON_HDLC, 0x08);
+		write_reg(hw, HFCUSB_INC_RES_F, 2); /* reset the fifo */
+	}
+
+	write_reg(hw, HFCUSB_SCTRL_R, 0); /* disable both B receivers */
+	handle_led(hw, LED_POWER_ON);
+}
+
+/* start USB data pipes dependand on device's endpoint configuration */
+static void
+hfcsusb_start_endpoint(struct hfcsusb *hw, int channel)
+{
+	/* quick check if endpoint already running */
+	if ((channel == HFC_CHAN_D) && (hw->fifos[HFCUSB_D_RX].active))
+		return;
+	if ((channel == HFC_CHAN_B1) && (hw->fifos[HFCUSB_B1_RX].active))
+		return;
+	if ((channel == HFC_CHAN_B2) && (hw->fifos[HFCUSB_B2_RX].active))
+		return;
+	if ((channel == HFC_CHAN_E) && (hw->fifos[HFCUSB_PCM_RX].active))
+		return;
+
+	/* start rx endpoints using USB INT IN method */
+	if (hw->cfg_used == CNF_3INT3ISO || hw->cfg_used == CNF_4INT3ISO)
+		start_int_fifo(hw->fifos + channel*2 + 1);
+
+	/* start rx endpoints using USB ISO IN method */
+	if (hw->cfg_used == CNF_3ISO3ISO || hw->cfg_used == CNF_4ISO3ISO) {
+		switch (channel) {
+		case HFC_CHAN_D:
+			start_isoc_chain(hw->fifos + HFCUSB_D_RX,
+				ISOC_PACKETS_D,
+				(usb_complete_t)rx_iso_complete,
+				16);
+			break;
+		case HFC_CHAN_E:
+			start_isoc_chain(hw->fifos + HFCUSB_PCM_RX,
+				ISOC_PACKETS_D,
+				(usb_complete_t)rx_iso_complete,
+				16);
+			break;
+		case HFC_CHAN_B1:
+			start_isoc_chain(hw->fifos + HFCUSB_B1_RX,
+				ISOC_PACKETS_B,
+				(usb_complete_t)rx_iso_complete,
+				16);
+			break;
+		case HFC_CHAN_B2:
+			start_isoc_chain(hw->fifos + HFCUSB_B2_RX,
+				ISOC_PACKETS_B,
+				(usb_complete_t)rx_iso_complete,
+				16);
+			break;
+		}
+	}
+
+	/* start tx endpoints using USB ISO OUT method */
+	switch (channel) {
+	case HFC_CHAN_D:
+		start_isoc_chain(hw->fifos + HFCUSB_D_TX,
+			ISOC_PACKETS_B,
+			(usb_complete_t)tx_iso_complete, 1);
+		break;
+	case HFC_CHAN_B1:
+		start_isoc_chain(hw->fifos + HFCUSB_B1_TX,
+			ISOC_PACKETS_D,
+			(usb_complete_t)tx_iso_complete, 1);
+		break;
+	case HFC_CHAN_B2:
+		start_isoc_chain(hw->fifos + HFCUSB_B2_TX,
+			ISOC_PACKETS_B,
+			(usb_complete_t)tx_iso_complete, 1);
+		break;
+	}
+}
+
+/* stop USB data pipes dependand on device's endpoint configuration */
+static void
+hfcsusb_stop_endpoint(struct hfcsusb *hw, int channel)
+{
+	/* quick check if endpoint currently running */
+	if ((channel == HFC_CHAN_D) && (!hw->fifos[HFCUSB_D_RX].active))
+		return;
+	if ((channel == HFC_CHAN_B1) && (!hw->fifos[HFCUSB_B1_RX].active))
+		return;
+	if ((channel == HFC_CHAN_B2) && (!hw->fifos[HFCUSB_B2_RX].active))
+		return;
+	if ((channel == HFC_CHAN_E) && (!hw->fifos[HFCUSB_PCM_RX].active))
+		return;
+
+	/* rx endpoints using USB INT IN method */
+	if (hw->cfg_used == CNF_3INT3ISO || hw->cfg_used == CNF_4INT3ISO)
+		stop_int_gracefull(hw->fifos + channel*2 + 1);
+
+	/* rx endpoints using USB ISO IN method */
+	if (hw->cfg_used == CNF_3ISO3ISO || hw->cfg_used == CNF_4ISO3ISO)
+		stop_iso_gracefull(hw->fifos + channel*2 + 1);
+
+	/* tx endpoints using USB ISO OUT method */
+	if (channel != HFC_CHAN_E)
+		stop_iso_gracefull(hw->fifos + channel*2);
+}
+
+
+/* Hardware Initialization */
+int
+setup_hfcsusb(struct hfcsusb *hw)
+{
+	int err;
+	u_char b;
+
+	if (debug & DBG_HFC_CALL_TRACE)
+		printk(KERN_DEBUG "%s: %s\n", hw->name, __func__);
+
+	/* check the chip id */
+	if (read_reg_atomic(hw, HFCUSB_CHIP_ID, &b) != 1) {
+		printk(KERN_DEBUG "%s: %s: cannot read chip id\n",
+		    hw->name, __func__);
+		return 1;
+	}
+	if (b != HFCUSB_CHIPID) {
+		printk(KERN_DEBUG "%s: %s: Invalid chip id 0x%02x\n",
+		    hw->name, __func__, b);
+		return 1;
+	}
+
+	/* first set the needed config, interface and alternate */
+	err = usb_set_interface(hw->dev, hw->if_used, hw->alt_used);
+
+	hw->led_state = 0;
+
+	/* init the background machinery for control requests */
+	hw->ctrl_read.bRequestType = 0xc0;
+	hw->ctrl_read.bRequest = 1;
+	hw->ctrl_read.wLength = cpu_to_le16(1);
+	hw->ctrl_write.bRequestType = 0x40;
+	hw->ctrl_write.bRequest = 0;
+	hw->ctrl_write.wLength = 0;
+	usb_fill_control_urb(hw->ctrl_urb, hw->dev, hw->ctrl_out_pipe,
+	    (u_char *)&hw->ctrl_write, NULL, 0,
+	    (usb_complete_t)ctrl_complete, hw);
+
+	reset_hfcsusb(hw);
+	return 0;
+}
+
+static void
+release_hw(struct hfcsusb *hw)
+{
+	if (debug & DBG_HFC_CALL_TRACE)
+		printk(KERN_DEBUG "%s: %s\n", hw->name, __func__);
+
+	/*
+	 * stop all endpoints gracefully
+	 * TODO: mISDN_core should generate CLOSE_CHANNEL
+	 *       signals after calling mISDN_unregister_device()
+	 */
+	hfcsusb_stop_endpoint(hw, HFC_CHAN_D);
+	hfcsusb_stop_endpoint(hw, HFC_CHAN_B1);
+	hfcsusb_stop_endpoint(hw, HFC_CHAN_B2);
+	if (hw->fifos[HFCUSB_PCM_RX].pipe)
+		hfcsusb_stop_endpoint(hw, HFC_CHAN_E);
+	if (hw->protocol == ISDN_P_TE_S0)
+		l1_event(hw->dch.l1, CLOSE_CHANNEL);
+
+	mISDN_unregister_device(&hw->dch.dev);
+	mISDN_freebchannel(&hw->bch[1]);
+	mISDN_freebchannel(&hw->bch[0]);
+	mISDN_freedchannel(&hw->dch);
+
+	if (hw->ctrl_urb) {
+		usb_kill_urb(hw->ctrl_urb);
+		usb_free_urb(hw->ctrl_urb);
+		hw->ctrl_urb = NULL;
+	}
+
+	if (hw->intf)
+		usb_set_intfdata(hw->intf, NULL);
+	list_del(&hw->list);
+	kfree(hw);
+	hw = NULL;
+}
+
+static void
+deactivate_bchannel(struct bchannel *bch)
+{
+	struct hfcsusb *hw = bch->hw;
+	u_long flags;
+
+	if (bch->debug & DEBUG_HW)
+		printk(KERN_DEBUG "%s: %s: bch->nr(%i)\n",
+		    hw->name, __func__, bch->nr);
+
+	spin_lock_irqsave(&hw->lock, flags);
+	if (test_and_clear_bit(FLG_TX_NEXT, &bch->Flags)) {
+		dev_kfree_skb(bch->next_skb);
+		bch->next_skb = NULL;
+	}
+	if (bch->tx_skb) {
+		dev_kfree_skb(bch->tx_skb);
+		bch->tx_skb = NULL;
+	}
+	bch->tx_idx = 0;
+	if (bch->rx_skb) {
+		dev_kfree_skb(bch->rx_skb);
+		bch->rx_skb = NULL;
+	}
+	clear_bit(FLG_ACTIVE, &bch->Flags);
+	clear_bit(FLG_TX_BUSY, &bch->Flags);
+	spin_unlock_irqrestore(&hw->lock, flags);
+	hfcsusb_setup_bch(bch, ISDN_P_NONE);
+	hfcsusb_stop_endpoint(hw, bch->nr);
+}
+
+/*
+ * Layer 1 B-channel hardware access
+ */
+static int
+hfc_bctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct bchannel	*bch = container_of(ch, struct bchannel, ch);
+	int		ret = -EINVAL;
+
+	if (bch->debug & DEBUG_HW)
+		printk(KERN_DEBUG "%s: cmd:%x %p\n", __func__, cmd, arg);
+
+	switch (cmd) {
+	case HW_TESTRX_RAW:
+	case HW_TESTRX_HDLC:
+	case HW_TESTRX_OFF:
+		ret = -EINVAL;
+		break;
+
+	case CLOSE_CHANNEL:
+		test_and_clear_bit(FLG_OPEN, &bch->Flags);
+		if (test_bit(FLG_ACTIVE, &bch->Flags))
+			deactivate_bchannel(bch);
+		ch->protocol = ISDN_P_NONE;
+		ch->peer = NULL;
+		module_put(THIS_MODULE);
+		ret = 0;
+		break;
+	case CONTROL_CHANNEL:
+		ret = channel_bctrl(bch, arg);
+		break;
+	default:
+		printk(KERN_WARNING "%s: unknown prim(%x)\n",
+			__func__, cmd);
+	}
+	return ret;
+}
+
+static int
+setup_instance(struct hfcsusb *hw, struct device *parent)
+{
+	u_long	flags;
+	int	err, i;
+
+	if (debug & DBG_HFC_CALL_TRACE)
+		printk(KERN_DEBUG "%s: %s\n", hw->name, __func__);
+
+	spin_lock_init(&hw->ctrl_lock);
+	spin_lock_init(&hw->lock);
+
+	mISDN_initdchannel(&hw->dch, MAX_DFRAME_LEN_L1, ph_state);
+	hw->dch.debug = debug & 0xFFFF;
+	hw->dch.hw = hw;
+	hw->dch.dev.Dprotocols = (1 << ISDN_P_TE_S0) | (1 << ISDN_P_NT_S0);
+	hw->dch.dev.D.send = hfcusb_l2l1D;
+	hw->dch.dev.D.ctrl = hfc_dctrl;
+
+	/* enable E-Channel logging */
+	if (hw->fifos[HFCUSB_PCM_RX].pipe)
+		mISDN_initdchannel(&hw->ech, MAX_DFRAME_LEN_L1, NULL);
+
+	hw->dch.dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
+	    (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
+	hw->dch.dev.nrbchan = 2;
+	for (i = 0; i < 2; i++) {
+		hw->bch[i].nr = i + 1;
+		set_channelmap(i + 1, hw->dch.dev.channelmap);
+		hw->bch[i].debug = debug;
+		mISDN_initbchannel(&hw->bch[i], MAX_DATA_MEM);
+		hw->bch[i].hw = hw;
+		hw->bch[i].ch.send = hfcusb_l2l1B;
+		hw->bch[i].ch.ctrl = hfc_bctrl;
+		hw->bch[i].ch.nr = i + 1;
+		list_add(&hw->bch[i].ch.list, &hw->dch.dev.bchannels);
+	}
+
+	hw->fifos[HFCUSB_B1_TX].bch = &hw->bch[0];
+	hw->fifos[HFCUSB_B1_RX].bch = &hw->bch[0];
+	hw->fifos[HFCUSB_B2_TX].bch = &hw->bch[1];
+	hw->fifos[HFCUSB_B2_RX].bch = &hw->bch[1];
+	hw->fifos[HFCUSB_D_TX].dch = &hw->dch;
+	hw->fifos[HFCUSB_D_RX].dch = &hw->dch;
+	hw->fifos[HFCUSB_PCM_RX].ech = &hw->ech;
+	hw->fifos[HFCUSB_PCM_TX].ech = &hw->ech;
+
+	err = setup_hfcsusb(hw);
+	if (err)
+		goto out;
+
+	snprintf(hw->name, MISDN_MAX_IDLEN - 1, "%s.%d", DRIVER_NAME,
+	    hfcsusb_cnt + 1);
+	printk(KERN_INFO "%s: registered as '%s'\n",
+	    DRIVER_NAME, hw->name);
+
+	err = mISDN_register_device(&hw->dch.dev, parent, hw->name);
+	if (err)
+		goto out;
+
+	hfcsusb_cnt++;
+	write_lock_irqsave(&HFClock, flags);
+	list_add_tail(&hw->list, &HFClist);
+	write_unlock_irqrestore(&HFClock, flags);
+	return 0;
+
+out:
+	mISDN_freebchannel(&hw->bch[1]);
+	mISDN_freebchannel(&hw->bch[0]);
+	mISDN_freedchannel(&hw->dch);
+	kfree(hw);
+	return err;
+}
+
+static int
+hfcsusb_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct hfcsusb			*hw;
+	struct usb_device		*dev = interface_to_usbdev(intf);
+	struct usb_host_interface	*iface = intf->cur_altsetting;
+	struct usb_host_interface	*iface_used = NULL;
+	struct usb_host_endpoint	*ep;
+	struct hfcsusb_vdata		*driver_info;
+	int ifnum = iface->desc.bInterfaceNumber, i, idx, alt_idx,
+	    probe_alt_setting, vend_idx, cfg_used, *vcf, attr, cfg_found,
+	    ep_addr, cmptbl[16], small_match, iso_packet_size, packet_size,
+	    alt_used = 0;
+
+	vend_idx = 0xffff;
+	for (i = 0; hfcsusb_idtab[i].idVendor; i++) {
+		if ((le16_to_cpu(dev->descriptor.idVendor)
+		       == hfcsusb_idtab[i].idVendor) &&
+		    (le16_to_cpu(dev->descriptor.idProduct)
+		       == hfcsusb_idtab[i].idProduct)) {
+			vend_idx = i;
+			continue;
+		}
+	}
+
+	printk(KERN_DEBUG
+	    "%s: interface(%d) actalt(%d) minor(%d) vend_idx(%d)\n",
+	    __func__, ifnum, iface->desc.bAlternateSetting,
+	    intf->minor, vend_idx);
+
+	if (vend_idx == 0xffff) {
+		printk(KERN_WARNING
+		    "%s: no valid vendor found in USB descriptor\n",
+		    __func__);
+		return -EIO;
+	}
+	/* if vendor and product ID is OK, start probing alternate settings */
+	alt_idx = 0;
+	small_match = -1;
+
+	/* default settings */
+	iso_packet_size = 16;
+	packet_size = 64;
+
+	while (alt_idx < intf->num_altsetting) {
+		iface = intf->altsetting + alt_idx;
+		probe_alt_setting = iface->desc.bAlternateSetting;
+		cfg_used = 0;
+
+		while (validconf[cfg_used][0]) {
+			cfg_found = 1;
+			vcf = validconf[cfg_used];
+			ep = iface->endpoint;
+			memcpy(cmptbl, vcf, 16 * sizeof(int));
+
+			/* check for all endpoints in this alternate setting */
+			for (i = 0; i < iface->desc.bNumEndpoints; i++) {
+				ep_addr = ep->desc.bEndpointAddress;
+
+				/* get endpoint base */
+				idx = ((ep_addr & 0x7f) - 1) * 2;
+				if (ep_addr & 0x80)
+					idx++;
+				attr = ep->desc.bmAttributes;
+
+				if (cmptbl[idx] != EP_NOP) {
+					if (cmptbl[idx] == EP_NUL)
+						cfg_found = 0;
+					if (attr == USB_ENDPOINT_XFER_INT
+						&& cmptbl[idx] == EP_INT)
+						cmptbl[idx] = EP_NUL;
+					if (attr == USB_ENDPOINT_XFER_BULK
+						&& cmptbl[idx] == EP_BLK)
+						cmptbl[idx] = EP_NUL;
+					if (attr == USB_ENDPOINT_XFER_ISOC
+						&& cmptbl[idx] == EP_ISO)
+						cmptbl[idx] = EP_NUL;
+
+					if (attr == USB_ENDPOINT_XFER_INT &&
+						ep->desc.bInterval < vcf[17]) {
+						cfg_found = 0;
+					}
+				}
+				ep++;
+			}
+
+			for (i = 0; i < 16; i++)
+				if (cmptbl[i] != EP_NOP && cmptbl[i] != EP_NUL)
+					cfg_found = 0;
+
+			if (cfg_found) {
+				if (small_match < cfg_used) {
+					small_match = cfg_used;
+					alt_used = probe_alt_setting;
+					iface_used = iface;
+				}
+			}
+			cfg_used++;
+		}
+		alt_idx++;
+	}	/* (alt_idx < intf->num_altsetting) */
+
+	/* not found a valid USB Ta Endpoint config */
+	if (small_match == -1)
+		return -EIO;
+
+	iface = iface_used;
+	hw = kzalloc(sizeof(struct hfcsusb), GFP_KERNEL);
+	if (!hw)
+		return -ENOMEM;	/* got no mem */
+	snprintf(hw->name, MISDN_MAX_IDLEN - 1, "%s", DRIVER_NAME);
+
+	ep = iface->endpoint;
+	vcf = validconf[small_match];
+
+	for (i = 0; i < iface->desc.bNumEndpoints; i++) {
+		struct usb_fifo *f;
+
+		ep_addr = ep->desc.bEndpointAddress;
+		/* get endpoint base */
+		idx = ((ep_addr & 0x7f) - 1) * 2;
+		if (ep_addr & 0x80)
+			idx++;
+		f = &hw->fifos[idx & 7];
+
+		/* init Endpoints */
+		if (vcf[idx] == EP_NOP || vcf[idx] == EP_NUL) {
+			ep++;
+			continue;
+		}
+		switch (ep->desc.bmAttributes) {
+		case USB_ENDPOINT_XFER_INT:
+			f->pipe = usb_rcvintpipe(dev,
+				ep->desc.bEndpointAddress);
+			f->usb_transfer_mode = USB_INT;
+			packet_size = le16_to_cpu(ep->desc.wMaxPacketSize);
+			break;
+		case USB_ENDPOINT_XFER_BULK:
+			if (ep_addr & 0x80)
+				f->pipe = usb_rcvbulkpipe(dev,
+					ep->desc.bEndpointAddress);
+			else
+				f->pipe = usb_sndbulkpipe(dev,
+					ep->desc.bEndpointAddress);
+			f->usb_transfer_mode = USB_BULK;
+			packet_size = le16_to_cpu(ep->desc.wMaxPacketSize);
+			break;
+		case USB_ENDPOINT_XFER_ISOC:
+			if (ep_addr & 0x80)
+				f->pipe = usb_rcvisocpipe(dev,
+					ep->desc.bEndpointAddress);
+			else
+				f->pipe = usb_sndisocpipe(dev,
+					ep->desc.bEndpointAddress);
+			f->usb_transfer_mode = USB_ISOC;
+			iso_packet_size = le16_to_cpu(ep->desc.wMaxPacketSize);
+			break;
+		default:
+			f->pipe = 0;
+		}
+
+		if (f->pipe) {
+			f->fifonum = idx & 7;
+			f->hw = hw;
+			f->usb_packet_maxlen =
+			    le16_to_cpu(ep->desc.wMaxPacketSize);
+			f->intervall = ep->desc.bInterval;
+		}
+		ep++;
+	}
+	hw->dev = dev; /* save device */
+	hw->if_used = ifnum; /* save used interface */
+	hw->alt_used = alt_used; /* and alternate config */
+	hw->ctrl_paksize = dev->descriptor.bMaxPacketSize0; /* control size */
+	hw->cfg_used = vcf[16];	/* store used config */
+	hw->vend_idx = vend_idx; /* store found vendor */
+	hw->packet_size = packet_size;
+	hw->iso_packet_size = iso_packet_size;
+
+	/* create the control pipes needed for register access */
+	hw->ctrl_in_pipe = usb_rcvctrlpipe(hw->dev, 0);
+	hw->ctrl_out_pipe = usb_sndctrlpipe(hw->dev, 0);
+	hw->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL);
+
+	driver_info =
+		(struct hfcsusb_vdata *)hfcsusb_idtab[vend_idx].driver_info;
+	printk(KERN_DEBUG "%s: %s: detected \"%s\" (%s, if=%d alt=%d)\n",
+	    hw->name, __func__, driver_info->vend_name,
+	    conf_str[small_match], ifnum, alt_used);
+
+	if (setup_instance(hw, dev->dev.parent))
+		return -EIO;
+
+	hw->intf = intf;
+	usb_set_intfdata(hw->intf, hw);
+	return 0;
+}
+
+/* function called when an active device is removed */
+static void
+hfcsusb_disconnect(struct usb_interface *intf)
+{
+	struct hfcsusb *hw = usb_get_intfdata(intf);
+	struct hfcsusb *next;
+	int cnt = 0;
+
+	printk(KERN_INFO "%s: device disconnected\n", hw->name);
+
+	handle_led(hw, LED_POWER_OFF);
+	release_hw(hw);
+
+	list_for_each_entry_safe(hw, next, &HFClist, list)
+		cnt++;
+	if (!cnt)
+		hfcsusb_cnt = 0;
+
+	usb_set_intfdata(intf, NULL);
+}
+
+static struct usb_driver hfcsusb_drv = {
+	.name = DRIVER_NAME,
+	.id_table = hfcsusb_idtab,
+	.probe = hfcsusb_probe,
+	.disconnect = hfcsusb_disconnect,
+};
+
+static int __init
+hfcsusb_init(void)
+{
+	printk(KERN_INFO DRIVER_NAME " driver Rev. %s debug(0x%x) poll(%i)\n",
+	    hfcsusb_rev, debug, poll);
+
+	if (usb_register(&hfcsusb_drv)) {
+		printk(KERN_INFO DRIVER_NAME
+		    ": Unable to register hfcsusb module at usb stack\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void __exit
+hfcsusb_cleanup(void)
+{
+	if (debug & DBG_HFC_CALL_TRACE)
+		printk(KERN_INFO DRIVER_NAME ": %s\n", __func__);
+
+	/* unregister Hardware */
+	usb_deregister(&hfcsusb_drv);	/* release our driver */
+}
+
+module_init(hfcsusb_init);
+module_exit(hfcsusb_cleanup);
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.h b/drivers/isdn/hardware/mISDN/hfcsusb.h
new file mode 100644
index 000000000000..098486b8e8d2
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.h
@@ -0,0 +1,418 @@
+/*
+ * hfcsusb.h, HFC-S USB mISDN driver
+ */
+
+#ifndef __HFCSUSB_H__
+#define __HFCSUSB_H__
+
+
+#define DRIVER_NAME "HFC-S_USB"
+
+#define DBG_HFC_CALL_TRACE	0x00010000
+#define DBG_HFC_FIFO_VERBOSE	0x00020000
+#define DBG_HFC_USB_VERBOSE	0x00100000
+#define DBG_HFC_URB_INFO	0x00200000
+#define DBG_HFC_URB_ERROR	0x00400000
+
+#define DEFAULT_TRANSP_BURST_SZ 128
+
+#define HFC_CTRL_TIMEOUT	20	/* 5ms timeout writing/reading regs */
+#define CLKDEL_TE		0x0f	/* CLKDEL in TE mode */
+#define CLKDEL_NT		0x6c	/* CLKDEL in NT mode */
+
+/* hfcsusb Layer1 commands */
+#define HFC_L1_ACTIVATE_TE		1
+#define HFC_L1_ACTIVATE_NT		2
+#define HFC_L1_DEACTIVATE_NT		3
+#define HFC_L1_FORCE_DEACTIVATE_TE	4
+
+/* cmd FLAGS in HFCUSB_STATES register */
+#define HFCUSB_LOAD_STATE	0x10
+#define HFCUSB_ACTIVATE		0x20
+#define HFCUSB_DO_ACTION	0x40
+#define HFCUSB_NT_G2_G3		0x80
+
+/* timers */
+#define NT_ACTIVATION_TIMER	0x01	/* enables NT mode activation Timer */
+#define NT_T1_COUNT		10
+
+#define MAX_BCH_SIZE 		2048	/* allowed B-channel packet size */
+
+#define HFCUSB_RX_THRESHOLD 	64	/* threshold for fifo report bit rx */
+#define HFCUSB_TX_THRESHOLD 	96	/* threshold for fifo report bit tx */
+
+#define HFCUSB_CHIP_ID		0x16	/* Chip ID register index */
+#define HFCUSB_CIRM		0x00	/* cirm register index */
+#define HFCUSB_USB_SIZE		0x07	/* int length register */
+#define HFCUSB_USB_SIZE_I	0x06	/* iso length register */
+#define HFCUSB_F_CROSS		0x0b	/* bit order register */
+#define HFCUSB_CLKDEL		0x37	/* bit delay register */
+#define HFCUSB_CON_HDLC		0xfa	/* channel connect register */
+#define HFCUSB_HDLC_PAR		0xfb
+#define HFCUSB_SCTRL		0x31	/* S-bus control register (tx) */
+#define HFCUSB_SCTRL_E		0x32	/* same for E and special funcs */
+#define HFCUSB_SCTRL_R		0x33	/* S-bus control register (rx) */
+#define HFCUSB_F_THRES		0x0c	/* threshold register */
+#define HFCUSB_FIFO		0x0f	/* fifo select register */
+#define HFCUSB_F_USAGE		0x1a	/* fifo usage register */
+#define HFCUSB_MST_MODE0	0x14
+#define HFCUSB_MST_MODE1	0x15
+#define HFCUSB_P_DATA		0x1f
+#define HFCUSB_INC_RES_F	0x0e
+#define HFCUSB_B1_SSL		0x20
+#define HFCUSB_B2_SSL		0x21
+#define HFCUSB_B1_RSL		0x24
+#define HFCUSB_B2_RSL		0x25
+#define HFCUSB_STATES		0x30
+
+
+#define HFCUSB_CHIPID		0x40	/* ID value of HFC-S USB */
+
+/* fifo registers */
+#define HFCUSB_NUM_FIFOS	8	/* maximum number of fifos */
+#define HFCUSB_B1_TX		0	/* index for B1 transmit bulk/int */
+#define HFCUSB_B1_RX		1	/* index for B1 receive bulk/int */
+#define HFCUSB_B2_TX		2
+#define HFCUSB_B2_RX		3
+#define HFCUSB_D_TX		4
+#define HFCUSB_D_RX		5
+#define HFCUSB_PCM_TX		6
+#define HFCUSB_PCM_RX		7
+
+
+#define USB_INT		0
+#define USB_BULK	1
+#define USB_ISOC	2
+
+#define ISOC_PACKETS_D	8
+#define ISOC_PACKETS_B	8
+#define ISO_BUFFER_SIZE	128
+
+/* defines how much ISO packets are handled in one URB */
+static int iso_packets[8] =
+    { ISOC_PACKETS_B, ISOC_PACKETS_B, ISOC_PACKETS_B, ISOC_PACKETS_B,
+	ISOC_PACKETS_D, ISOC_PACKETS_D, ISOC_PACKETS_D, ISOC_PACKETS_D
+};
+
+
+/* Fifo flow Control for TX ISO */
+#define SINK_MAX	68
+#define SINK_MIN	48
+#define SINK_DMIN	12
+#define SINK_DMAX	18
+#define BITLINE_INF	(-96*8)
+
+/* HFC-S USB register access by Control-URSs */
+#define write_reg_atomic(a, b, c) \
+	usb_control_msg((a)->dev, (a)->ctrl_out_pipe, 0, 0x40, (c), (b), \
+		0, 0, HFC_CTRL_TIMEOUT)
+#define read_reg_atomic(a, b, c) \
+	usb_control_msg((a)->dev, (a)->ctrl_in_pipe, 1, 0xC0, 0, (b), (c), \
+		1, HFC_CTRL_TIMEOUT)
+#define HFC_CTRL_BUFSIZE 64
+
+struct ctrl_buf {
+	__u8 hfcs_reg;		/* register number */
+	__u8 reg_val;		/* value to be written (or read) */
+};
+
+/*
+ * URB error codes
+ * Used to represent a list of values and their respective symbolic names
+ */
+struct hfcusb_symbolic_list {
+	const int num;
+	const char *name;
+};
+
+static struct hfcusb_symbolic_list urb_errlist[] = {
+	{-ENOMEM, "No memory for allocation of internal structures"},
+	{-ENOSPC, "The host controller's bandwidth is already consumed"},
+	{-ENOENT, "URB was canceled by unlink_urb"},
+	{-EXDEV, "ISO transfer only partially completed"},
+	{-EAGAIN, "Too match scheduled for the future"},
+	{-ENXIO, "URB already queued"},
+	{-EFBIG, "Too much ISO frames requested"},
+	{-ENOSR, "Buffer error (overrun)"},
+	{-EPIPE, "Specified endpoint is stalled (device not responding)"},
+	{-EOVERFLOW, "Babble (bad cable?)"},
+	{-EPROTO, "Bit-stuff error (bad cable?)"},
+	{-EILSEQ, "CRC/Timeout"},
+	{-ETIMEDOUT, "NAK (device does not respond)"},
+	{-ESHUTDOWN, "Device unplugged"},
+	{-1, NULL}
+};
+
+static inline const char *
+symbolic(struct hfcusb_symbolic_list list[], const int num)
+{
+	int i;
+	for (i = 0; list[i].name != NULL; i++)
+		if (list[i].num == num)
+			return list[i].name;
+	return "<unkown USB Error>";
+}
+
+/* USB descriptor need to contain one of the following EndPoint combination: */
+#define CNF_4INT3ISO	1	/* 4 INT IN, 3 ISO OUT */
+#define CNF_3INT3ISO	2	/* 3 INT IN, 3 ISO OUT */
+#define CNF_4ISO3ISO	3	/* 4 ISO IN, 3 ISO OUT */
+#define CNF_3ISO3ISO	4	/* 3 ISO IN, 3 ISO OUT */
+
+#define EP_NUL 1	/* Endpoint at this position not allowed */
+#define EP_NOP 2	/* all type of endpoints allowed at this position */
+#define EP_ISO 3	/* Isochron endpoint mandatory at this position */
+#define EP_BLK 4	/* Bulk endpoint mandatory at this position */
+#define EP_INT 5	/* Interrupt endpoint mandatory at this position */
+
+#define HFC_CHAN_B1	0
+#define HFC_CHAN_B2	1
+#define HFC_CHAN_D	2
+#define HFC_CHAN_E	3
+
+
+/*
+ * List of all supported enpoints configiration sets, used to find the
+ * best matching endpoint configuration within a devices' USB descriptor.
+ * We need at least 3 RX endpoints, and 3 TX endpoints, either
+ * INT-in and ISO-out, or ISO-in and ISO-out)
+ * with 4 RX endpoints even E-Channel logging is possible
+ */
+static int
+validconf[][19] = {
+	/* INT in, ISO out config */
+	{EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NOP, EP_INT,
+	 EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_NUL, EP_NUL,
+	 CNF_4INT3ISO, 2, 1},
+	{EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_NUL,
+	 EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_NUL, EP_NUL,
+	 CNF_3INT3ISO, 2, 0},
+	/* ISO in, ISO out config */
+	{EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP,
+	 EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_NOP, EP_ISO,
+	 CNF_4ISO3ISO, 2, 1},
+	{EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL,
+	 EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_NUL, EP_NUL,
+	 CNF_3ISO3ISO, 2, 0},
+	{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} /* EOL element */
+};
+
+/* string description of chosen config */
+char *conf_str[] = {
+	"4 Interrupt IN + 3 Isochron OUT",
+	"3 Interrupt IN + 3 Isochron OUT",
+	"4 Isochron IN + 3 Isochron OUT",
+	"3 Isochron IN + 3 Isochron OUT"
+};
+
+
+#define LED_OFF		0	/* no LED support */
+#define LED_SCHEME1	1	/* LED standard scheme */
+#define LED_SCHEME2	2	/* not used yet... */
+
+#define LED_POWER_ON	1
+#define LED_POWER_OFF	2
+#define LED_S0_ON	3
+#define LED_S0_OFF	4
+#define LED_B1_ON	5
+#define LED_B1_OFF	6
+#define LED_B1_DATA	7
+#define LED_B2_ON	8
+#define LED_B2_OFF	9
+#define LED_B2_DATA	10
+
+#define LED_NORMAL	0	/* LEDs are normal */
+#define LED_INVERTED 	1	/* LEDs are inverted */
+
+/* time in ms to perform a Flashing LED when B-Channel has traffic */
+#define LED_TIME      250
+
+
+
+struct hfcsusb;
+struct usb_fifo;
+
+/* structure defining input+output fifos (interrupt/bulk mode) */
+struct iso_urb {
+	struct urb *urb;
+	__u8 buffer[ISO_BUFFER_SIZE];	/* buffer rx/tx USB URB data */
+	struct usb_fifo *owner_fifo;	/* pointer to owner fifo */
+	__u8 indx; /* Fifos's ISO double buffer 0 or 1 ? */
+#ifdef ISO_FRAME_START_DEBUG
+	int start_frames[ISO_FRAME_START_RING_COUNT];
+	__u8 iso_frm_strt_pos; /* index in start_frame[] */
+#endif
+};
+
+struct usb_fifo {
+	int fifonum;		/* fifo index attached to this structure */
+	int active;		/* fifo is currently active */
+	struct hfcsusb *hw;	/* pointer to main structure */
+	int pipe;		/* address of endpoint */
+	__u8 usb_packet_maxlen;	/* maximum length for usb transfer */
+	unsigned int max_size;	/* maximum size of receive/send packet */
+	__u8 intervall;		/* interrupt interval */
+	struct urb *urb;	/* transfer structure for usb routines */
+	__u8 buffer[128];	/* buffer USB INT OUT URB data */
+	int bit_line;		/* how much bits are in the fifo? */
+
+	__u8 usb_transfer_mode; /* switched between ISO and INT */
+	struct iso_urb	iso[2]; /* two urbs to have one always
+					 one pending */
+
+	struct dchannel *dch;	/* link to hfcsusb_t->dch */
+	struct bchannel *bch;	/* link to hfcsusb_t->bch */
+	struct dchannel *ech;	/* link to hfcsusb_t->ech, TODO: E-CHANNEL */
+	int last_urblen;	/* remember length of last packet */
+	__u8 stop_gracefull;	/* stops URB retransmission */
+};
+
+struct hfcsusb {
+	struct list_head	list;
+	struct dchannel		dch;
+	struct bchannel		bch[2];
+	struct dchannel		ech; /* TODO : wait for struct echannel ;) */
+
+	struct usb_device	*dev;		/* our device */
+	struct usb_interface	*intf;		/* used interface */
+	int			if_used;	/* used interface number */
+	int			alt_used;	/* used alternate config */
+	int			cfg_used;	/* configuration index used */
+	int			vend_idx;	/* index in hfcsusb_idtab */
+	int			packet_size;
+	int			iso_packet_size;
+	struct usb_fifo		fifos[HFCUSB_NUM_FIFOS];
+
+	/* control pipe background handling */
+	struct ctrl_buf		ctrl_buff[HFC_CTRL_BUFSIZE];
+	int			ctrl_in_idx, ctrl_out_idx, ctrl_cnt;
+	struct urb		*ctrl_urb;
+	struct usb_ctrlrequest	ctrl_write;
+	struct usb_ctrlrequest	ctrl_read;
+	int			ctrl_paksize;
+	int			ctrl_in_pipe, ctrl_out_pipe;
+	spinlock_t		ctrl_lock; /* lock for ctrl */
+	spinlock_t              lock;
+
+	__u8			threshold_mask;
+	__u8			led_state;
+
+	__u8			protocol;
+	int			nt_timer;
+	int			open;
+	__u8			timers;
+	__u8			initdone;
+	char			name[MISDN_MAX_IDLEN];
+};
+
+/* private vendor specific data */
+struct hfcsusb_vdata {
+	__u8		led_scheme;  /* led display scheme */
+	signed short	led_bits[8]; /* array of 8 possible LED bitmask */
+	char		*vend_name;  /* device name */
+};
+
+
+#define HFC_MAX_TE_LAYER1_STATE 8
+#define HFC_MAX_NT_LAYER1_STATE 4
+
+const char *HFC_TE_LAYER1_STATES[HFC_MAX_TE_LAYER1_STATE + 1] = {
+	"TE F0 - Reset",
+	"TE F1 - Reset",
+	"TE F2 - Sensing",
+	"TE F3 - Deactivated",
+	"TE F4 - Awaiting signal",
+	"TE F5 - Identifying input",
+	"TE F6 - Synchronized",
+	"TE F7 - Activated",
+	"TE F8 - Lost framing",
+};
+
+const char *HFC_NT_LAYER1_STATES[HFC_MAX_NT_LAYER1_STATE + 1] = {
+	"NT G0 - Reset",
+	"NT G1 - Deactive",
+	"NT G2 - Pending activation",
+	"NT G3 - Active",
+	"NT G4 - Pending deactivation",
+};
+
+/* supported devices */
+static struct usb_device_id hfcsusb_idtab[] = {
+	{
+	 USB_DEVICE(0x0959, 0x2bd0),
+	 .driver_info = (unsigned long) &((struct hfcsusb_vdata)
+			  {LED_OFF, {4, 0, 2, 1},
+			   "ISDN USB TA (Cologne Chip HFC-S USB based)"}),
+	},
+	{
+	 USB_DEVICE(0x0675, 0x1688),
+	 .driver_info = (unsigned long) &((struct hfcsusb_vdata)
+			  {LED_SCHEME1, {1, 2, 0, 0},
+			   "DrayTek miniVigor 128 USB ISDN TA"}),
+	},
+	{
+	 USB_DEVICE(0x07b0, 0x0007),
+	 .driver_info = (unsigned long) &((struct hfcsusb_vdata)
+			  {LED_SCHEME1, {0x80, -64, -32, -16},
+			   "Billion tiny USB ISDN TA 128"}),
+	},
+	{
+	 USB_DEVICE(0x0742, 0x2008),
+	 .driver_info = (unsigned long) &((struct hfcsusb_vdata)
+			  {LED_SCHEME1, {4, 0, 2, 1},
+			   "Stollmann USB TA"}),
+	},
+	{
+	 USB_DEVICE(0x0742, 0x2009),
+	 .driver_info = (unsigned long) &((struct hfcsusb_vdata)
+			  {LED_SCHEME1, {4, 0, 2, 1},
+			   "Aceex USB ISDN TA"}),
+	},
+	{
+	 USB_DEVICE(0x0742, 0x200A),
+	 .driver_info = (unsigned long) &((struct hfcsusb_vdata)
+			  {LED_SCHEME1, {4, 0, 2, 1},
+			   "OEM USB ISDN TA"}),
+	},
+	{
+	 USB_DEVICE(0x08e3, 0x0301),
+	 .driver_info = (unsigned long) &((struct hfcsusb_vdata)
+			  {LED_SCHEME1, {2, 0, 1, 4},
+			   "Olitec USB RNIS"}),
+	},
+	{
+	 USB_DEVICE(0x07fa, 0x0846),
+	 .driver_info = (unsigned long) &((struct hfcsusb_vdata)
+			  {LED_SCHEME1, {0x80, -64, -32, -16},
+			   "Bewan Modem RNIS USB"}),
+	},
+	{
+	 USB_DEVICE(0x07fa, 0x0847),
+	 .driver_info = (unsigned long) &((struct hfcsusb_vdata)
+			  {LED_SCHEME1, {0x80, -64, -32, -16},
+			   "Djinn Numeris USB"}),
+	},
+	{
+	 USB_DEVICE(0x07b0, 0x0006),
+	 .driver_info = (unsigned long) &((struct hfcsusb_vdata)
+			  {LED_SCHEME1, {0x80, -64, -32, -16},
+			   "Twister ISDN TA"}),
+	},
+	{
+	 USB_DEVICE(0x071d, 0x1005),
+	 .driver_info = (unsigned long) &((struct hfcsusb_vdata)
+			  {LED_SCHEME1, {0x02, 0, 0x01, 0x04},
+			   "Eicon DIVA USB 4.0"}),
+	},
+	{
+	 USB_DEVICE(0x0586, 0x0102),
+	 .driver_info = (unsigned long) &((struct hfcsusb_vdata)
+			  {LED_SCHEME1, {0x88, -64, -32, -16},
+			   "ZyXEL OMNI.NET USB II"}),
+	},
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, hfcsusb_idtab);
+
+#endif	/* __HFCSUSB_H__ */