summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorManuel Lauss <manuel.lauss@googlemail.com>2010-04-21 17:41:59 +0200
committerRalf Baechle <ralf@linux-mips.org>2010-04-30 20:52:43 +0100
commit0000a5390184af1459e82506fcfa7db96f3e6d33 (patch)
treea21be05f506bbee603e2a280d126204ce7dbf3d4
parent0dfeecacd8e4405209f217944818b90016bb4a9d (diff)
downloadlinux-0000a5390184af1459e82506fcfa7db96f3e6d33.tar.gz
linux-0000a5390184af1459e82506fcfa7db96f3e6d33.tar.bz2
linux-0000a5390184af1459e82506fcfa7db96f3e6d33.zip
MIPS: DB1200: PCMCIA card detection must not be auto-enabled.
Same issues as SD card detection: One of both is always triggering and the handlers take care to shut it up and enable the other. To avoid messages about "unbalanced interrupt enable/disable" they must not be automatically enabled when initally requested. This was not an issue with the db1200_defconfig due to fortunate timings; on a build without network chip support the warnings appear. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1133/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-rw-r--r--arch/mips/alchemy/devboards/db1200/setup.c10
-rw-r--r--drivers/pcmcia/db1xxx_ss.c16
2 files changed, 11 insertions, 15 deletions
diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c
index be7e92ea01f3..887619547553 100644
--- a/arch/mips/alchemy/devboards/db1200/setup.c
+++ b/arch/mips/alchemy/devboards/db1200/setup.c
@@ -66,12 +66,16 @@ static int __init db1200_arch_init(void)
set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
- /* do not autoenable these: CPLD has broken edge int handling,
- * and the CD handler setup requires manual enabling to work
- * around that.
+ /* insert/eject pairs: one of both is always screaming. To avoid
+ * issues they must not be automatically enabled when initially
+ * requested.
*/
irq_to_desc(DB1200_SD0_INSERT_INT)->status |= IRQ_NOAUTOEN;
irq_to_desc(DB1200_SD0_EJECT_INT)->status |= IRQ_NOAUTOEN;
+ irq_to_desc(DB1200_PC0_INSERT_INT)->status |= IRQ_NOAUTOEN;
+ irq_to_desc(DB1200_PC0_EJECT_INT)->status |= IRQ_NOAUTOEN;
+ irq_to_desc(DB1200_PC1_INSERT_INT)->status |= IRQ_NOAUTOEN;
+ irq_to_desc(DB1200_PC1_EJECT_INT)->status |= IRQ_NOAUTOEN;
return 0;
}
diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c
index 2d48196a48cd..0f4cc3f00028 100644
--- a/drivers/pcmcia/db1xxx_ss.c
+++ b/drivers/pcmcia/db1xxx_ss.c
@@ -146,7 +146,6 @@ static irqreturn_t db1200_pcmcia_cdirq(int irq, void *data)
static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock)
{
int ret;
- unsigned long flags;
if (sock->stschg_irq != -1) {
ret = request_irq(sock->stschg_irq, db1000_pcmcia_stschgirq,
@@ -162,30 +161,23 @@ static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock)
* active one disabled.
*/
if (sock->board_type == BOARD_TYPE_DB1200) {
- local_irq_save(flags);
-
ret = request_irq(sock->insert_irq, db1200_pcmcia_cdirq,
IRQF_DISABLED, "pcmcia_insert", sock);
- if (ret) {
- local_irq_restore(flags);
+ if (ret)
goto out1;
- }
ret = request_irq(sock->eject_irq, db1200_pcmcia_cdirq,
IRQF_DISABLED, "pcmcia_eject", sock);
if (ret) {
free_irq(sock->insert_irq, sock);
- local_irq_restore(flags);
goto out1;
}
- /* disable the currently active one */
+ /* enable the currently silent one */
if (db1200_card_inserted(sock))
- disable_irq_nosync(sock->insert_irq);
+ enable_irq(sock->eject_irq);
else
- disable_irq_nosync(sock->eject_irq);
-
- local_irq_restore(flags);
+ enable_irq(sock->insert_irq);
} else {
/* all other (older) Db1x00 boards use a GPIO to show
* card detection status: use both-edge triggers.