Merge branch 'lpc32xx/multiplatform' into arm/soc

I revisited some older patches here, getting two of the remaining
ARM platforms to build with ARCH_MULTIPLATFORM like most others do.

In case of lpc32xx, I created a new set of patches, which seemed
easier than digging out what I did for an older release many
years ago.

* lpc32xx/multiplatform:
  ARM: lpc32xx: allow multiplatform build
  ARM: lpc32xx: clean up header files
  serial: lpc32xx: allow compile testing
  net: lpc-enet: allow compile testing
  net: lpc-enet: fix printk format strings
  net: lpc-enet: fix badzero.cocci warnings
  net: lpc-enet: move phy setup into platform code
  net: lpc-enet: factor out iram access
  gpio: lpc32xx: allow building on non-lpc32xx targets
  serial: lpc32xx_hs: allow compile-testing
  watchdog: pnx4008_wdt: allow compile-testing
  usb: udc: lpc32xx: allow compile-testing
  usb: ohci-nxp: enable compile-testing

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

27 files changed, 242 insertions, 272 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8c4382e5e5f3..1086a0e8083e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -424,21 +424,6 @@ config ARCH_DOVE
 	help
 	  Support for the Marvell Dove SoC 88AP510
 
-config ARCH_LPC32XX
-	bool "NXP LPC32XX"
-	select ARM_AMBA
-	select CLKDEV_LOOKUP
-	select CLKSRC_LPC32XX
-	select COMMON_CLK
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_IRQ_MULTI_HANDLER
-	select GPIOLIB
-	select SPARSE_IRQ
-	select USE_OF
-	help
-	  Support for the NXP LPC32XX family of processors
-
 config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
@@ -686,6 +671,8 @@ source "arch/arm/mach-ixp4xx/Kconfig"
 
 source "arch/arm/mach-keystone/Kconfig"
 
+source "arch/arm/mach-lpc32xx/Kconfig"
+
 source "arch/arm/mach-mediatek/Kconfig"
 
 source "arch/arm/mach-meson/Kconfig"
diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig
index 0cdc6c7974b3..09deb57db942 100644
--- a/arch/arm/configs/lpc32xx_defconfig
+++ b/arch/arm/configs/lpc32xx_defconfig
@@ -12,6 +12,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_LPC32XX=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -93,6 +94,7 @@ CONFIG_SERIAL_HS_LPC32XX_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_PNX=y
+CONFIG_GPIO_LPC32XX=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_SYSFS=y
diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig
new file mode 100644
index 000000000000..ec87c65f4536
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/Kconfig
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config ARCH_LPC32XX
+	bool "NXP LPC32XX"
+	depends on ARCH_MULTI_V5
+	select ARM_AMBA
+	select CLKSRC_LPC32XX
+	select CPU_ARM926T
+	select GPIOLIB
+	help
+	  Support for the NXP LPC32XX family of processors
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index 5b71b4fab2cd..304ea61a0716 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -8,12 +8,12 @@
  */
 
 #include <linux/init.h>
+#include <linux/soc/nxp/lpc32xx-misc.h>
 
 #include <asm/mach/map.h>
 #include <asm/system_info.h>
 
-#include <mach/hardware.h>
-#include <mach/platform.h>
+#include "lpc32xx.h"
 #include "common.h"
 
 /*
@@ -32,7 +32,7 @@ void lpc32xx_get_uid(u32 devid[4])
  */
 #define LPC32XX_IRAM_BANK_SIZE SZ_128K
 static u32 iram_size;
-u32 lpc32xx_return_iram_size(void)
+u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaaddr)
 {
 	if (iram_size == 0) {
 		u32 savedval1, savedval2;
@@ -53,10 +53,26 @@ u32 lpc32xx_return_iram_size(void)
 		} else
 			iram_size = LPC32XX_IRAM_BANK_SIZE * 2;
 	}
+	if (dmaaddr)
+		*dmaaddr = LPC32XX_IRAM_BASE;
+	if (mapbase)
+		*mapbase = io_p2v(LPC32XX_IRAM_BASE);
 
 	return iram_size;
 }
-EXPORT_SYMBOL_GPL(lpc32xx_return_iram_size);
+EXPORT_SYMBOL_GPL(lpc32xx_return_iram);
+
+void lpc32xx_set_phy_interface_mode(phy_interface_t mode)
+{
+	u32 tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL);
+	tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK;
+	if (mode == PHY_INTERFACE_MODE_MII)
+		tmp |= LPC32XX_CLKPWR_MACCTRL_USE_MII_PINS;
+	else
+		tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS;
+	__raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL);
+}
+EXPORT_SYMBOL_GPL(lpc32xx_set_phy_interface_mode);
 
 static struct map_desc lpc32xx_io_desc[] __initdata = {
 	{
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
index 8e597ce48a73..32f0ad217807 100644
--- a/arch/arm/mach-lpc32xx/common.h
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -23,7 +23,6 @@ extern void __init lpc32xx_serial_init(void);
  */
 extern void lpc32xx_get_uid(u32 devid[4]);
 
-extern u32 lpc32xx_return_iram_size(void);
 /*
  * Pointers used for sizing and copying suspend function data
  */
diff --git a/arch/arm/mach-lpc32xx/include/mach/board.h b/arch/arm/mach-lpc32xx/include/mach/board.h
deleted file mode 100644
index 476513d970a4..000000000000
--- a/arch/arm/mach-lpc32xx/include/mach/board.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arm/arch/mach-lpc32xx/include/mach/board.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- */
-
-#ifndef __ASM_ARCH_BOARD_H
-#define __ASM_ARCH_BOARD_H
-
-extern u32 lpc32xx_return_iram_size(void);
-
-#endif  /* __ASM_ARCH_BOARD_H */
diff --git a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
deleted file mode 100644
index eec0f5f7e722..000000000000
--- a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-lpc32xx/include/mach/entry-macro.S
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- */
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
-#define LPC32XX_INTC_MASKED_STATUS_OFS	0x8
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IO_ADDRESS(LPC32XX_MIC_BASE)
-	.endm
-
-/*
- * Return IRQ number in irqnr. Also return processor Z flag status in CPSR
- * as set if an interrupt is pending.
- */
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqstat, [\base, #LPC32XX_INTC_MASKED_STATUS_OFS]
-	clz	\irqnr, \irqstat
-	rsb	\irqnr, \irqnr, #31
-	teq	\irqstat, #0
-	.endm
diff --git a/arch/arm/mach-lpc32xx/include/mach/hardware.h b/arch/arm/mach-lpc32xx/include/mach/hardware.h
deleted file mode 100644
index 4866f096ffce..000000000000
--- a/arch/arm/mach-lpc32xx/include/mach/hardware.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-lpc32xx/include/mach/hardware.h
- *
- * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/*
- * Start of virtual addresses for IO devices
- */
-#define IO_BASE		0xF0000000
-
-/*
- * This macro relies on fact that for all HW i/o addresses bits 20-23 are 0
- */
-#define IO_ADDRESS(x)	IOMEM(((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\
-			 IO_BASE)
-
-#define io_p2v(x)	((void __iomem *) (unsigned long) IO_ADDRESS(x))
-#define io_v2p(x)	((((x) & 0x0ff00000) << 4) | ((x) & 0x000fffff))
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/uncompress.h b/arch/arm/mach-lpc32xx/include/mach/uncompress.h
deleted file mode 100644
index a568812a0b91..000000000000
--- a/arch/arm/mach-lpc32xx/include/mach/uncompress.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-lpc32xx/include/mach/uncompress.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- */
-
-#ifndef __ASM_ARM_ARCH_UNCOMPRESS_H
-#define __ASM_ARM_ARCH_UNCOMPRESS_H
-
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
-/*
- * Uncompress output is hardcoded to standard UART 5
- */
-
-#define UART_FIFO_CTL_TX_RESET	(1 << 2)
-#define UART_STATUS_TX_MT	(1 << 6)
-
-#define _UARTREG(x)		(void __iomem *)(LPC32XX_UART5_BASE + (x))
-
-#define LPC32XX_UART_DLLFIFO_O	0x00
-#define LPC32XX_UART_IIRFCR_O	0x08
-#define LPC32XX_UART_LSR_O	0x14
-
-static inline void putc(int ch)
-{
-	/* Wait for transmit FIFO to empty */
-	while ((__raw_readl(_UARTREG(LPC32XX_UART_LSR_O)) &
-		UART_STATUS_TX_MT) == 0)
-		;
-
-	__raw_writel((u32) ch, _UARTREG(LPC32XX_UART_DLLFIFO_O));
-}
-
-static inline void flush(void)
-{
-	__raw_writel(__raw_readl(_UARTREG(LPC32XX_UART_IIRFCR_O)) |
-		UART_FIFO_CTL_TX_RESET, _UARTREG(LPC32XX_UART_IIRFCR_O));
-}
-
-/* NULL functions; we don't presently need them */
-#define arch_decomp_setup()
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/platform.h b/arch/arm/mach-lpc32xx/lpc32xx.h
index 1c53790444fc..5eeb884a1993 100644
--- a/arch/arm/mach-lpc32xx/include/mach/platform.h
+++ b/arch/arm/mach-lpc32xx/lpc32xx.h
@@ -7,8 +7,8 @@
  * Copyright (C) 2010 NXP Semiconductors
  */
 
-#ifndef __ASM_ARCH_PLATFORM_H
-#define __ASM_ARCH_PLATFORM_H
+#ifndef __ARM_LPC32XX_H
+#define __ARM_LPC32XX_H
 
 #define _SBF(f, v)				((v) << (f))
 #define _BIT(n)					_SBF(n, 1)
@@ -700,4 +700,18 @@
 #define LPC32XX_USB_OTG_DEV_CLOCK_ON	_BIT(1)
 #define LPC32XX_USB_OTG_HOST_CLOCK_ON	_BIT(0)
 
+/*
+ * Start of virtual addresses for IO devices
+ */
+#define IO_BASE		0xF0000000
+
+/*
+ * This macro relies on fact that for all HW i/o addresses bits 20-23 are 0
+ */
+#define IO_ADDRESS(x)	IOMEM(((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\
+			 IO_BASE)
+
+#define io_p2v(x)	((void __iomem *) (unsigned long) IO_ADDRESS(x))
+#define io_v2p(x)	((((x) & 0x0ff00000) << 4) | ((x) & 0x000fffff))
+
 #endif
diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c
index 32bca351a73b..b27fa1b9f56c 100644
--- a/arch/arm/mach-lpc32xx/pm.c
+++ b/arch/arm/mach-lpc32xx/pm.c
@@ -70,8 +70,7 @@
 
 #include <asm/cacheflush.h>
 
-#include <mach/hardware.h>
-#include <mach/platform.h>
+#include "lpc32xx.h"
 #include "common.h"
 
 #define TEMP_IRAM_AREA  IO_ADDRESS(LPC32XX_IRAM_BASE)
diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
index 3f9b30df9f0e..3e765c4bf986 100644
--- a/arch/arm/mach-lpc32xx/serial.c
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -16,8 +16,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
-#include <mach/platform.h>
+#include "lpc32xx.h"
 #include "common.h"
 
 #define LPC32XX_SUART_FIFO_SIZE	64
@@ -60,6 +59,36 @@ static struct uartinit uartinit_data[] __initdata = {
 	},
 };
 
+/* LPC3250 Errata HSUART.1: Hang workaround via loopback mode on inactivity */
+void lpc32xx_loopback_set(resource_size_t mapbase, int state)
+{
+	int bit;
+	u32 tmp;
+
+	switch (mapbase) {
+	case LPC32XX_HS_UART1_BASE:
+		bit = 0;
+		break;
+	case LPC32XX_HS_UART2_BASE:
+		bit = 1;
+		break;
+	case LPC32XX_HS_UART7_BASE:
+		bit = 6;
+		break;
+	default:
+		WARN(1, "lpc32xx_hs: Warning: Unknown port at %08x\n", mapbase);
+		return;
+	}
+
+	tmp = readl(LPC32XX_UARTCTL_CLOOP);
+	if (state)
+		tmp |= (1 << bit);
+	else
+		tmp &= ~(1 << bit);
+	writel(tmp, LPC32XX_UARTCTL_CLOOP);
+}
+EXPORT_SYMBOL_GPL(lpc32xx_loopback_set);
+
 void __init lpc32xx_serial_init(void)
 {
 	u32 tmp, clkmodes = 0;
diff --git a/arch/arm/mach-lpc32xx/suspend.S b/arch/arm/mach-lpc32xx/suspend.S
index 374f9f07fe48..3f0a8282ef6f 100644
--- a/arch/arm/mach-lpc32xx/suspend.S
+++ b/arch/arm/mach-lpc32xx/suspend.S
@@ -11,8 +11,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <mach/platform.h>
-#include <mach/hardware.h>
+#include "lpc32xx.h"
 
 /* Using named register defines makes the code easier to follow */
 #define WORK1_REG			r0
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 6d4bc584efc4..34c679cd564f 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -311,6 +311,13 @@ config GPIO_LPC18XX
 	  Select this option to enable GPIO driver for
 	  NXP LPC18XX/43XX devices.
 
+config GPIO_LPC32XX
+	tristate "NXP LPC32XX GPIO support"
+	depends on OF_GPIO && (ARCH_LPC32XX || COMPILE_TEST)
+	help
+	  Select this option to enable GPIO driver for
+	  NXP LPC32XX devices.
+
 config GPIO_LYNXPOINT
 	tristate "Intel Lynxpoint GPIO support"
 	depends on ACPI && X86
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index a4e91175c708..87d659ae95eb 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -74,7 +74,7 @@ obj-$(CONFIG_GPIO_LP3943)		+= gpio-lp3943.o
 obj-$(CONFIG_GPIO_LP873X)		+= gpio-lp873x.o
 obj-$(CONFIG_GPIO_LP87565)		+= gpio-lp87565.o
 obj-$(CONFIG_GPIO_LPC18XX)		+= gpio-lpc18xx.o
-obj-$(CONFIG_ARCH_LPC32XX)		+= gpio-lpc32xx.o
+obj-$(CONFIG_GPIO_LPC32XX)		+= gpio-lpc32xx.o
 obj-$(CONFIG_GPIO_LYNXPOINT)		+= gpio-lynxpoint.o
 obj-$(CONFIG_GPIO_MADERA)		+= gpio-madera.o
 obj-$(CONFIG_GPIO_MAX3191X)		+= gpio-max3191x.o
diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c
index 24885b3db3d5..4e626c4235c2 100644
--- a/drivers/gpio/gpio-lpc32xx.c
+++ b/drivers/gpio/gpio-lpc32xx.c
@@ -16,36 +16,33 @@
 #include <linux/platform_device.h>
 #include <linux/module.h>
 
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
-#define LPC32XX_GPIO_P3_INP_STATE		_GPREG(0x000)
-#define LPC32XX_GPIO_P3_OUTP_SET		_GPREG(0x004)
-#define LPC32XX_GPIO_P3_OUTP_CLR		_GPREG(0x008)
-#define LPC32XX_GPIO_P3_OUTP_STATE		_GPREG(0x00C)
-#define LPC32XX_GPIO_P2_DIR_SET			_GPREG(0x010)
-#define LPC32XX_GPIO_P2_DIR_CLR			_GPREG(0x014)
-#define LPC32XX_GPIO_P2_DIR_STATE		_GPREG(0x018)
-#define LPC32XX_GPIO_P2_INP_STATE		_GPREG(0x01C)
-#define LPC32XX_GPIO_P2_OUTP_SET		_GPREG(0x020)
-#define LPC32XX_GPIO_P2_OUTP_CLR		_GPREG(0x024)
-#define LPC32XX_GPIO_P2_MUX_SET			_GPREG(0x028)
-#define LPC32XX_GPIO_P2_MUX_CLR			_GPREG(0x02C)
-#define LPC32XX_GPIO_P2_MUX_STATE		_GPREG(0x030)
-#define LPC32XX_GPIO_P0_INP_STATE		_GPREG(0x040)
-#define LPC32XX_GPIO_P0_OUTP_SET		_GPREG(0x044)
-#define LPC32XX_GPIO_P0_OUTP_CLR		_GPREG(0x048)
-#define LPC32XX_GPIO_P0_OUTP_STATE		_GPREG(0x04C)
-#define LPC32XX_GPIO_P0_DIR_SET			_GPREG(0x050)
-#define LPC32XX_GPIO_P0_DIR_CLR			_GPREG(0x054)
-#define LPC32XX_GPIO_P0_DIR_STATE		_GPREG(0x058)
-#define LPC32XX_GPIO_P1_INP_STATE		_GPREG(0x060)
-#define LPC32XX_GPIO_P1_OUTP_SET		_GPREG(0x064)
-#define LPC32XX_GPIO_P1_OUTP_CLR		_GPREG(0x068)
-#define LPC32XX_GPIO_P1_OUTP_STATE		_GPREG(0x06C)
-#define LPC32XX_GPIO_P1_DIR_SET			_GPREG(0x070)
-#define LPC32XX_GPIO_P1_DIR_CLR			_GPREG(0x074)
-#define LPC32XX_GPIO_P1_DIR_STATE		_GPREG(0x078)
+#define LPC32XX_GPIO_P3_INP_STATE		(0x000)
+#define LPC32XX_GPIO_P3_OUTP_SET		(0x004)
+#define LPC32XX_GPIO_P3_OUTP_CLR		(0x008)
+#define LPC32XX_GPIO_P3_OUTP_STATE		(0x00C)
+#define LPC32XX_GPIO_P2_DIR_SET			(0x010)
+#define LPC32XX_GPIO_P2_DIR_CLR			(0x014)
+#define LPC32XX_GPIO_P2_DIR_STATE		(0x018)
+#define LPC32XX_GPIO_P2_INP_STATE		(0x01C)
+#define LPC32XX_GPIO_P2_OUTP_SET		(0x020)
+#define LPC32XX_GPIO_P2_OUTP_CLR		(0x024)
+#define LPC32XX_GPIO_P2_MUX_SET			(0x028)
+#define LPC32XX_GPIO_P2_MUX_CLR			(0x02C)
+#define LPC32XX_GPIO_P2_MUX_STATE		(0x030)
+#define LPC32XX_GPIO_P0_INP_STATE		(0x040)
+#define LPC32XX_GPIO_P0_OUTP_SET		(0x044)
+#define LPC32XX_GPIO_P0_OUTP_CLR		(0x048)
+#define LPC32XX_GPIO_P0_OUTP_STATE		(0x04C)
+#define LPC32XX_GPIO_P0_DIR_SET			(0x050)
+#define LPC32XX_GPIO_P0_DIR_CLR			(0x054)
+#define LPC32XX_GPIO_P0_DIR_STATE		(0x058)
+#define LPC32XX_GPIO_P1_INP_STATE		(0x060)
+#define LPC32XX_GPIO_P1_OUTP_SET		(0x064)
+#define LPC32XX_GPIO_P1_OUTP_CLR		(0x068)
+#define LPC32XX_GPIO_P1_OUTP_STATE		(0x06C)
+#define LPC32XX_GPIO_P1_DIR_SET			(0x070)
+#define LPC32XX_GPIO_P1_DIR_CLR			(0x074)
+#define LPC32XX_GPIO_P1_DIR_STATE		(0x078)
 
 #define GPIO012_PIN_TO_BIT(x)			(1 << (x))
 #define GPIO3_PIN_TO_BIT(x)			(1 << ((x) + 25))
@@ -72,12 +69,12 @@
 #define LPC32XX_GPO_P3_GRP	(LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX)
 
 struct gpio_regs {
-	void __iomem *inp_state;
-	void __iomem *outp_state;
-	void __iomem *outp_set;
-	void __iomem *outp_clr;
-	void __iomem *dir_set;
-	void __iomem *dir_clr;
+	unsigned long inp_state;
+	unsigned long outp_state;
+	unsigned long outp_set;
+	unsigned long outp_clr;
+	unsigned long dir_set;
+	unsigned long dir_clr;
 };
 
 /*
@@ -165,16 +162,27 @@ static struct gpio_regs gpio_grp_regs_p3 = {
 struct lpc32xx_gpio_chip {
 	struct gpio_chip	chip;
 	struct gpio_regs	*gpio_grp;
+	void __iomem		*reg_base;
 };
 
+static inline u32 gpreg_read(struct lpc32xx_gpio_chip *group, unsigned long offset)
+{
+	return __raw_readl(group->reg_base + offset);
+}
+
+static inline void gpreg_write(struct lpc32xx_gpio_chip *group, u32 val, unsigned long offset)
+{
+	__raw_writel(val, group->reg_base + offset);
+}
+
 static void __set_gpio_dir_p012(struct lpc32xx_gpio_chip *group,
 	unsigned pin, int input)
 {
 	if (input)
-		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+		gpreg_write(group, GPIO012_PIN_TO_BIT(pin),
 			group->gpio_grp->dir_clr);
 	else
-		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+		gpreg_write(group, GPIO012_PIN_TO_BIT(pin),
 			group->gpio_grp->dir_set);
 }
 
@@ -184,19 +192,19 @@ static void __set_gpio_dir_p3(struct lpc32xx_gpio_chip *group,
 	u32 u = GPIO3_PIN_TO_BIT(pin);
 
 	if (input)
-		__raw_writel(u, group->gpio_grp->dir_clr);
+		gpreg_write(group, u, group->gpio_grp->dir_clr);
 	else
-		__raw_writel(u, group->gpio_grp->dir_set);
+		gpreg_write(group, u, group->gpio_grp->dir_set);
 }
 
 static void __set_gpio_level_p012(struct lpc32xx_gpio_chip *group,
 	unsigned pin, int high)
 {
 	if (high)
-		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+		gpreg_write(group, GPIO012_PIN_TO_BIT(pin),
 			group->gpio_grp->outp_set);
 	else
-		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+		gpreg_write(group, GPIO012_PIN_TO_BIT(pin),
 			group->gpio_grp->outp_clr);
 }
 
@@ -206,31 +214,31 @@ static void __set_gpio_level_p3(struct lpc32xx_gpio_chip *group,
 	u32 u = GPIO3_PIN_TO_BIT(pin);
 
 	if (high)
-		__raw_writel(u, group->gpio_grp->outp_set);
+		gpreg_write(group, u, group->gpio_grp->outp_set);
 	else
-		__raw_writel(u, group->gpio_grp->outp_clr);
+		gpreg_write(group, u, group->gpio_grp->outp_clr);
 }
 
 static void __set_gpo_level_p3(struct lpc32xx_gpio_chip *group,
 	unsigned pin, int high)
 {
 	if (high)
-		__raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_set);
+		gpreg_write(group, GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_set);
 	else
-		__raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_clr);
+		gpreg_write(group, GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_clr);
 }
 
 static int __get_gpio_state_p012(struct lpc32xx_gpio_chip *group,
 	unsigned pin)
 {
-	return GPIO012_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state),
+	return GPIO012_PIN_IN_SEL(gpreg_read(group, group->gpio_grp->inp_state),
 		pin);
 }
 
 static int __get_gpio_state_p3(struct lpc32xx_gpio_chip *group,
 	unsigned pin)
 {
-	int state = __raw_readl(group->gpio_grp->inp_state);
+	int state = gpreg_read(group, group->gpio_grp->inp_state);
 
 	/*
 	 * P3 GPIO pin input mapping is not contiguous, GPIOP3-0..4 is mapped
@@ -242,13 +250,13 @@ static int __get_gpio_state_p3(struct lpc32xx_gpio_chip *group,
 static int __get_gpi_state_p3(struct lpc32xx_gpio_chip *group,
 	unsigned pin)
 {
-	return GPI3_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), pin);
+	return GPI3_PIN_IN_SEL(gpreg_read(group, group->gpio_grp->inp_state), pin);
 }
 
 static int __get_gpo_state_p3(struct lpc32xx_gpio_chip *group,
 	unsigned pin)
 {
-	return GPO3_PIN_IN_SEL(__raw_readl(group->gpio_grp->outp_state), pin);
+	return GPO3_PIN_IN_SEL(gpreg_read(group, group->gpio_grp->outp_state), pin);
 }
 
 /*
@@ -497,12 +505,18 @@ static int lpc32xx_of_xlate(struct gpio_chip *gc,
 static int lpc32xx_gpio_probe(struct platform_device *pdev)
 {
 	int i;
+	void __iomem *reg_base;
+
+	reg_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(reg_base))
+		return PTR_ERR(reg_base);
 
 	for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++) {
 		if (pdev->dev.of_node) {
 			lpc32xx_gpiochip[i].chip.of_xlate = lpc32xx_of_xlate;
 			lpc32xx_gpiochip[i].chip.of_gpio_n_cells = 3;
 			lpc32xx_gpiochip[i].chip.of_node = pdev->dev.of_node;
+			lpc32xx_gpiochip[i].reg_base = reg_base;
 		}
 		devm_gpiochip_add_data(&pdev->dev, &lpc32xx_gpiochip[i].chip,
 				  &lpc32xx_gpiochip[i]);
@@ -527,3 +541,7 @@ static struct platform_driver lpc32xx_gpio_driver = {
 };
 
 module_platform_driver(lpc32xx_gpio_driver);
+
+MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("GPIO driver for LPC32xx SoC");
diff --git a/drivers/net/ethernet/nxp/Kconfig b/drivers/net/ethernet/nxp/Kconfig
index 261f107e2be0..418afb84c84b 100644
--- a/drivers/net/ethernet/nxp/Kconfig
+++ b/drivers/net/ethernet/nxp/Kconfig
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config LPC_ENET
         tristate "NXP ethernet MAC on LPC devices"
-        depends on ARCH_LPC32XX
+        depends on ARCH_LPC32XX || COMPILE_TEST
         select PHYLIB
         help
 	  Say Y or M here if you want to use the NXP ethernet MAC included on
diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c
index f7e11f1b0426..141571e2ec11 100644
--- a/drivers/net/ethernet/nxp/lpc_eth.c
+++ b/drivers/net/ethernet/nxp/lpc_eth.c
@@ -14,14 +14,12 @@
 #include <linux/crc32.h>
 #include <linux/etherdevice.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/of_net.h>
 #include <linux/phy.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
-
-#include <mach/board.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
+#include <linux/soc/nxp/lpc32xx-misc.h>
 
 #define MODNAME "lpc-eth"
 #define DRV_VERSION "1.00"
@@ -1237,16 +1235,9 @@ static int lpc_eth_drv_probe(struct platform_device *pdev)
 	dma_addr_t dma_handle;
 	struct resource *res;
 	int irq, ret;
-	u32 tmp;
 
 	/* Setup network interface for RMII or MII mode */
-	tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL);
-	tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK;
-	if (lpc_phy_interface_mode(dev) == PHY_INTERFACE_MODE_MII)
-		tmp |= LPC32XX_CLKPWR_MACCTRL_USE_MII_PINS;
-	else
-		tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS;
-	__raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL);
+	lpc32xx_set_phy_interface_mode(lpc_phy_interface_mode(dev));
 
 	/* Get platform resources */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1311,19 +1302,18 @@ static int lpc_eth_drv_probe(struct platform_device *pdev)
 	/* Get size of DMA buffers/descriptors region */
 	pldat->dma_buff_size = (ENET_TX_DESC + ENET_RX_DESC) * (ENET_MAXF_SIZE +
 		sizeof(struct txrx_desc_t) + sizeof(struct rx_status_t));
-	pldat->dma_buff_base_v = 0;
 
 	if (use_iram_for_net(dev)) {
-		dma_handle = LPC32XX_IRAM_BASE;
-		if (pldat->dma_buff_size <= lpc32xx_return_iram_size())
-			pldat->dma_buff_base_v =
-				io_p2v(LPC32XX_IRAM_BASE);
-		else
+		if (pldat->dma_buff_size >
+		    lpc32xx_return_iram(&pldat->dma_buff_base_v, &dma_handle)) {
+			pldat->dma_buff_base_v = NULL;
+			pldat->dma_buff_size = 0;
 			netdev_err(ndev,
 				"IRAM not big enough for net buffers, using SDRAM instead.\n");
+		}
 	}
 
-	if (pldat->dma_buff_base_v == 0) {
+	if (pldat->dma_buff_base_v == NULL) {
 		ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
 		if (ret)
 			goto err_out_free_irq;
@@ -1344,13 +1334,14 @@ static int lpc_eth_drv_probe(struct platform_device *pdev)
 	pldat->dma_buff_base_p = dma_handle;
 
 	netdev_dbg(ndev, "IO address space     :%pR\n", res);
-	netdev_dbg(ndev, "IO address size      :%d\n", resource_size(res));
+	netdev_dbg(ndev, "IO address size      :%zd\n",
+			(size_t)resource_size(res));
 	netdev_dbg(ndev, "IO address (mapped)  :0x%p\n",
 			pldat->net_base);
 	netdev_dbg(ndev, "IRQ number           :%d\n", ndev->irq);
-	netdev_dbg(ndev, "DMA buffer size      :%d\n", pldat->dma_buff_size);
-	netdev_dbg(ndev, "DMA buffer P address :0x%08x\n",
-			pldat->dma_buff_base_p);
+	netdev_dbg(ndev, "DMA buffer size      :%zd\n", pldat->dma_buff_size);
+	netdev_dbg(ndev, "DMA buffer P address :%pad\n",
+			&pldat->dma_buff_base_p);
 	netdev_dbg(ndev, "DMA buffer V address :0x%p\n",
 			pldat->dma_buff_base_v);
 
@@ -1397,8 +1388,8 @@ static int lpc_eth_drv_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_out_unregister_netdev;
 
-	netdev_info(ndev, "LPC mac at 0x%08x irq %d\n",
-	       res->start, ndev->irq);
+	netdev_info(ndev, "LPC mac at 0x%08lx irq %d\n",
+	       (unsigned long)res->start, ndev->irq);
 
 	device_init_wakeup(dev, 1);
 	device_set_wakeup_enable(dev, 0);
@@ -1409,7 +1400,7 @@ err_out_unregister_netdev:
 	unregister_netdev(ndev);
 err_out_dma_unmap:
 	if (!use_iram_for_net(dev) ||
-	    pldat->dma_buff_size > lpc32xx_return_iram_size())
+	    pldat->dma_buff_size > lpc32xx_return_iram(NULL, NULL))
 		dma_free_coherent(dev, pldat->dma_buff_size,
 				  pldat->dma_buff_base_v,
 				  pldat->dma_buff_base_p);
@@ -1436,7 +1427,7 @@ static int lpc_eth_drv_remove(struct platform_device *pdev)
 	unregister_netdev(ndev);
 
 	if (!use_iram_for_net(&pldat->pdev->dev) ||
-	    pldat->dma_buff_size > lpc32xx_return_iram_size())
+	    pldat->dma_buff_size > lpc32xx_return_iram(NULL, NULL))
 		dma_free_coherent(&pldat->pdev->dev, pldat->dma_buff_size,
 				  pldat->dma_buff_base_v,
 				  pldat->dma_buff_base_p);
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 3083dbae35f7..518aac902e4b 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -739,7 +739,8 @@ config SERIAL_PNX8XXX_CONSOLE
 
 config SERIAL_HS_LPC32XX
 	tristate "LPC32XX high speed serial port support"
-	depends on ARCH_LPC32XX && OF
+	depends on ARCH_LPC32XX || COMPILE_TEST
+	depends on OF
 	select SERIAL_CORE
 	help
 	  Support for the LPC32XX high speed serial ports (up to 900kbps).
diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c
index f4e27d0ad947..d3843f722182 100644
--- a/drivers/tty/serial/lpc32xx_hs.c
+++ b/drivers/tty/serial/lpc32xx_hs.c
@@ -25,8 +25,8 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 #include <linux/of.h>
-#include <mach/platform.h>
-#include <mach/hardware.h>
+#include <linux/sizes.h>
+#include <linux/soc/nxp/lpc32xx-misc.h>
 
 /*
  * High Speed UART register offsets
@@ -81,6 +81,8 @@
 #define LPC32XX_HSU_TX_TL8B			(0x2 << 0)
 #define LPC32XX_HSU_TX_TL16B			(0x3 << 0)
 
+#define LPC32XX_MAIN_OSC_FREQ			13000000
+
 #define MODNAME "lpc32xx_hsuart"
 
 struct lpc32xx_hsuart_port {
@@ -151,8 +153,6 @@ static void lpc32xx_hsuart_console_write(struct console *co, const char *s,
 	local_irq_restore(flags);
 }
 
-static void lpc32xx_loopback_set(resource_size_t mapbase, int state);
-
 static int __init lpc32xx_hsuart_console_setup(struct console *co,
 					       char *options)
 {
@@ -439,35 +439,6 @@ static void serial_lpc32xx_break_ctl(struct uart_port *port,
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
-/* LPC3250 Errata HSUART.1: Hang workaround via loopback mode on inactivity */
-static void lpc32xx_loopback_set(resource_size_t mapbase, int state)
-{
-	int bit;
-	u32 tmp;
-
-	switch (mapbase) {
-	case LPC32XX_HS_UART1_BASE:
-		bit = 0;
-		break;
-	case LPC32XX_HS_UART2_BASE:
-		bit = 1;
-		break;
-	case LPC32XX_HS_UART7_BASE:
-		bit = 6;
-		break;
-	default:
-		WARN(1, "lpc32xx_hs: Warning: Unknown port at %08x\n", mapbase);
-		return;
-	}
-
-	tmp = readl(LPC32XX_UARTCTL_CLOOP);
-	if (state)
-		tmp |= (1 << bit);
-	else
-		tmp &= ~(1 << bit);
-	writel(tmp, LPC32XX_UARTCTL_CLOOP);
-}
-
 /* port->lock is not held.  */
 static int serial_lpc32xx_startup(struct uart_port *port)
 {
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index ef0259a950ba..d354036ff6c8 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -45,7 +45,8 @@ config USB_AT91
 
 config USB_LPC32XX
 	tristate "LPC32XX USB Peripheral Controller"
-	depends on ARCH_LPC32XX && I2C
+	depends on ARCH_LPC32XX || COMPILE_TEST
+	depends on I2C
 	select USB_ISP1301
 	help
 	   This option selects the USB device controller in the LPC32xx SoC.
diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c
index 5f1b14f3e5a0..defe04d52e6d 100644
--- a/drivers/usb/gadget/udc/lpc32xx_udc.c
+++ b/drivers/usb/gadget/udc/lpc32xx_udc.c
@@ -24,6 +24,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/prefetch.h>
 #include <linux/proc_fs.h>
 #include <linux/slab.h>
 #include <linux/usb/ch9.h>
@@ -35,8 +36,6 @@
 #include <linux/seq_file.h>
 #endif
 
-#include <mach/hardware.h>
-
 /*
  * USB device configuration structure
  */
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 40b5de597112..73d233d3bf4d 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -441,7 +441,8 @@ config USB_OHCI_HCD_S3C2410
 
 config USB_OHCI_HCD_LPC32XX
 	tristate "Support for LPC on-chip OHCI USB controller"
-	depends on USB_OHCI_HCD && ARCH_LPC32XX
+	depends on USB_OHCI_HCD
+	depends on ARCH_LPC32XX || COMPILE_TEST
 	depends on USB_ISP1301
 	default y
 	---help---
diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c
index f5f532601092..c561881d0e79 100644
--- a/drivers/usb/host/ohci-nxp.c
+++ b/drivers/usb/host/ohci-nxp.c
@@ -29,10 +29,7 @@
 
 #include "ohci.h"
 
-#include <mach/hardware.h>
-
 #define USB_CONFIG_BASE		0x31020000
-#define USB_OTG_STAT_CONTROL	IO_ADDRESS(USB_CONFIG_BASE + 0x110)
 
 /* USB_OTG_STAT_CONTROL bit defines */
 #define TRANSPARENT_I2C_EN	(1 << 7)
@@ -122,19 +119,33 @@ static inline void isp1301_vbus_off(void)
 
 static void ohci_nxp_start_hc(void)
 {
-	unsigned long tmp = __raw_readl(USB_OTG_STAT_CONTROL) | HOST_EN;
+	void __iomem *usb_otg_stat_control = ioremap(USB_CONFIG_BASE + 0x110, 4);
+	unsigned long tmp;
+
+	if (WARN_ON(!usb_otg_stat_control))
+		return;
+
+	tmp = __raw_readl(usb_otg_stat_control) | HOST_EN;
 
-	__raw_writel(tmp, USB_OTG_STAT_CONTROL);
+	__raw_writel(tmp, usb_otg_stat_control);
 	isp1301_vbus_on();
+
+	iounmap(usb_otg_stat_control);
 }
 
 static void ohci_nxp_stop_hc(void)
 {
+	void __iomem *usb_otg_stat_control = ioremap(USB_CONFIG_BASE + 0x110, 4);
 	unsigned long tmp;
 
+	if (WARN_ON(!usb_otg_stat_control))
+		return;
+
 	isp1301_vbus_off();
-	tmp = __raw_readl(USB_OTG_STAT_CONTROL) & ~HOST_EN;
-	__raw_writel(tmp, USB_OTG_STAT_CONTROL);
+	tmp = __raw_readl(usb_otg_stat_control) & ~HOST_EN;
+	__raw_writel(tmp, usb_otg_stat_control);
+
+	iounmap(usb_otg_stat_control);
 }
 
 static int ohci_hcd_nxp_probe(struct platform_device *pdev)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 8188963a405b..a45f9e3e442b 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -551,7 +551,7 @@ config OMAP_WATCHDOG
 
 config PNX4008_WATCHDOG
 	tristate "LPC32XX Watchdog"
-	depends on ARCH_LPC32XX
+	depends on ARCH_LPC32XX || COMPILE_TEST
 	select WATCHDOG_CORE
 	help
 	  Say Y here if to include support for the watchdog timer
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index 7b446b696f2b..e0ea133c1690 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -30,7 +30,6 @@
 #include <linux/of.h>
 #include <linux/delay.h>
 #include <linux/reboot.h>
-#include <mach/hardware.h>
 
 /* WatchDog Timer - Chapter 23 Page 207 */
 
diff --git a/include/linux/soc/nxp/lpc32xx-misc.h b/include/linux/soc/nxp/lpc32xx-misc.h
new file mode 100644
index 000000000000..699c6f1e3aab
--- /dev/null
+++ b/include/linux/soc/nxp/lpc32xx-misc.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ */
+
+#ifndef __SOC_LPC32XX_MISC_H
+#define __SOC_LPC32XX_MISC_H
+
+#include <linux/types.h>
+#include <linux/phy.h>
+
+#ifdef CONFIG_ARCH_LPC32XX
+extern u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaaddr);
+extern void lpc32xx_set_phy_interface_mode(phy_interface_t mode);
+extern void lpc32xx_loopback_set(resource_size_t mapbase, int state);
+#else
+static inline u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaaddr)
+{
+	*mapbase = NULL;
+	*dmaaddr = 0;
+	return 0;
+}
+static inline void lpc32xx_set_phy_interface_mode(phy_interface_t mode)
+{
+}
+static inline void lpc32xx_loopback_set(resource_size_t mapbase, int state)
+{
+}
+#endif
+
+#endif  /* __SOC_LPC32XX_MISC_H */