summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMark A. Greer <mgreer@mvista.com>2008-02-04 22:27:54 -0800
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2008-02-05 09:44:10 -0800
commit7bbdc3d51cf793dd81c38f794f4cb73df58d1527 (patch)
tree483bf4e7db67bcd7d292d09679cdc3f755e8ac85
parent3e8d4e2075e049664294722b436edfc5ced6ca53 (diff)
downloadlinux-7bbdc3d51cf793dd81c38f794f4cb73df58d1527.tar.gz
linux-7bbdc3d51cf793dd81c38f794f4cb73df58d1527.tar.bz2
linux-7bbdc3d51cf793dd81c38f794f4cb73df58d1527.zip
serial: MPSC: set baudrate when BRG divider is set.
The clock to generate the desired baudrate with the MPSC is first divided by the Baud Rate Generator (BRG) and then by the MPSC itself. So, when the BRG divider is changed, the MPSC divider must also be changed to generate the correct baudrate. During MPSC initialization, the BRG divider is changed but the MPSC divider isn't changed until much later. This results in some printk's coming out garbled. To fix that, set the MPSC divider at the same time that the BRG divider is changed. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-rw-r--r--drivers/serial/mpsc.c1
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
index 4d643c926657..cb3a91967742 100644
--- a/drivers/serial/mpsc.c
+++ b/drivers/serial/mpsc.c
@@ -612,6 +612,7 @@ static void mpsc_hw_init(struct mpsc_port_info *pi)
/* No preamble, 16x divider, low-latency, */
writel(0x04400400, pi->mpsc_base + MPSC_MMCRH);
+ mpsc_set_baudrate(pi, pi->default_baud);
if (pi->mirror_regs) {
pi->MPSC_CHR_1_m = 0;