summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJeremy McNicoll <jeremy.mcnicoll@windriver.com>2008-05-05 18:17:24 -0400
committerKumar Gala <galak@kernel.crashing.org>2008-05-13 08:53:48 -0500
commitbfd123bf91704b88093673e615cc93329f820ab4 (patch)
treeec9080bdaaa6668fe294f1752400c73d00f55646
parent73f5b8f942d6a2f178061dbbf9bcc54ca68ddf39 (diff)
downloadlinux-bfd123bf91704b88093673e615cc93329f820ab4.tar.gz
linux-bfd123bf91704b88093673e615cc93329f820ab4.tar.bz2
linux-bfd123bf91704b88093673e615cc93329f820ab4.zip
[POWERPC] 85xx: SBC8548 - Add flash support and HW Rev reporting
The following adds local bus, flash and MTD partition nodes for sbc8548. As well, a compatible field for the soc node, so that of_platform_bus_probe() will pick it up. Something that is provided through this newly added epld node is the Hardware Revision which is now being utilized. Signed-off-by: Jeremy McNicoll <jeremy.mcnicoll@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-rw-r--r--arch/powerpc/boot/dts/sbc8548.dts94
-rw-r--r--arch/powerpc/platforms/85xx/sbc8548.c30
2 files changed, 123 insertions, 1 deletions
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index b86e65d926c1..22d967178fe9 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -52,6 +52,99 @@
reg = <0x00000000 0x10000000>;
};
+ localbus@e0000000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ reg = <0xe0000000 0x5000>;
+ interrupt-parent = <&mpic>;
+
+ ranges = <0x0 0x0 0xff800000 0x00800000 /*8MB Flash*/
+ 0x3 0x0 0xf0000000 0x04000000 /*64MB SDRAM*/
+ 0x4 0x0 0xf4000000 0x04000000 /*64MB SDRAM*/
+ 0x5 0x0 0xf8000000 0x00b10000 /* EPLD */
+ 0x6 0x0 0xfb800000 0x04000000>; /*64MB Flash*/
+
+
+ flash@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x800000>;
+ bank-width = <1>;
+ device-width = <1>;
+ partition@0x0 {
+ label = "space";
+ reg = <0x00000000 0x00100000>;
+ };
+ partition@0x100000 {
+ label = "bootloader";
+ reg = <0x00100000 0x00700000>;
+ read-only;
+ };
+ };
+
+ epld@5,0 {
+ compatible = "wrs,epld-localbus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0x5 0x0 0x00b10000>;
+ ranges = <
+ 0x0 0x0 0x5 0x000000 0x1fff /* LED */
+ 0x1 0x0 0x5 0x100000 0x1fff /* Switches */
+ 0x3 0x0 0x5 0x300000 0x1fff /* HW Rev. */
+ 0xb 0x0 0x5 0xb00000 0x1fff /* EEPROM */
+ >;
+
+ led@0,0 {
+ compatible = "led";
+ reg = <0x0 0x0 0x1fff>;
+ };
+
+ switches@1,0 {
+ compatible = "switches";
+ reg = <0x1 0x0 0x1fff>;
+ };
+
+ hw-rev@3,0 {
+ compatible = "hw-rev";
+ reg = <0x3 0x0 0x1fff>;
+ };
+
+ eeprom@b,0 {
+ compatible = "eeprom";
+ reg = <0xb 0 0x1fff>;
+ };
+
+ };
+
+ alt-flash@6,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6 0x0 0x04000000>;
+ compatible = "cfi-flash";
+ bank-width = <4>;
+ device-width = <1>;
+ partition@0x0 {
+ label = "bootloader";
+ reg = <0x00000000 0x00100000>;
+ read-only;
+ };
+ partition@0x00100000 {
+ label = "file-system";
+ reg = <0x00100000 0x01f00000>;
+ };
+ partition@0x02000000 {
+ label = "boot-config";
+ reg = <0x02000000 0x00100000>;
+ };
+ partition@0x02100000 {
+ label = "space";
+ reg = <0x02100000 0x01f00000>;
+ };
+ };
+ };
+
soc8548@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -59,6 +152,7 @@
ranges = <0x00000000 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00001000>; // CCSRBAR
bus-frequency = <0>;
+ compatible = "simple-bus";
memory-controller@2000 {
compatible = "fsl,8548-memory-controller";
diff --git a/arch/powerpc/platforms/85xx/sbc8548.c b/arch/powerpc/platforms/85xx/sbc8548.c
index 488facb99fe8..b9246ea0928a 100644
--- a/arch/powerpc/platforms/85xx/sbc8548.c
+++ b/arch/powerpc/platforms/85xx/sbc8548.c
@@ -49,6 +49,8 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+static int sbc_rev;
+
static void __init sbc8548_pic_init(void)
{
struct mpic *mpic;
@@ -79,6 +81,30 @@ static void __init sbc8548_pic_init(void)
mpic_init(mpic);
}
+/* Extract the HW Rev from the EPLD on the board */
+static int __init sbc8548_hw_rev(void)
+{
+ struct device_node *np;
+ struct resource res;
+ unsigned int *rev;
+ int board_rev = 0;
+
+ np = of_find_compatible_node(NULL, NULL, "hw-rev");
+ if (np == NULL) {
+ printk("No HW-REV found in DTB.\n");
+ return -ENODEV;
+ }
+
+ of_address_to_resource(np, 0, &res);
+ of_node_put(np);
+
+ rev = ioremap(res.start,sizeof(unsigned int));
+ board_rev = (*rev) >> 28;
+ iounmap(rev);
+
+ return board_rev;
+}
+
/*
* Setup the architecture
*/
@@ -104,6 +130,7 @@ static void __init sbc8548_setup_arch(void)
}
}
#endif
+ sbc_rev = sbc8548_hw_rev();
}
static void sbc8548_show_cpuinfo(struct seq_file *m)
@@ -115,7 +142,7 @@ static void sbc8548_show_cpuinfo(struct seq_file *m)
svid = mfspr(SPRN_SVR);
seq_printf(m, "Vendor\t\t: Wind River\n");
- seq_printf(m, "Machine\t\t: SBC8548\n");
+ seq_printf(m, "Machine\t\t: SBC8548 v%d\n", sbc_rev);
seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
@@ -130,6 +157,7 @@ static void sbc8548_show_cpuinfo(struct seq_file *m)
static struct of_device_id __initdata of_bus_ids[] = {
{ .name = "soc", },
{ .type = "soc", },
+ { .compatible = "simple-bus", },
{},
};