Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] kill ata_sg_is_last()
  Update libata driver for bf548 atapi controller against the 2.6.24 tree.
  libata-sff: Correct use of check_status()
  drivers/ata: add support to Freescale 3.0Gbps SATA Controller
  pata_acpi: fix build breakage if !CONFIG_PM

11 files changed, 1567 insertions, 90 deletions

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 33f5eb038773..ba63619ae5df 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -182,6 +182,15 @@ config PATA_ACPI
 	  firmware in the BIOS. This driver can sometimes handle
 	  otherwise unsupported hardware.
 
+config SATA_FSL
+	tristate "Freescale 3.0Gbps SATA support"
+	depends on PPC_MPC837x
+	help
+	  This option enables support for Freescale 3.0Gbps SATA controller.
+	  It can be found on MPC837x and MPC8315.
+
+	  If unsure, say N.
+
 config PATA_ALI
 	tristate "ALi PATA support (Experimental)"
 	depends on PCI && EXPERIMENTAL
@@ -641,11 +650,4 @@ config PATA_BF54X
 
 	  If unsure, say N.
 
-config PATA_BF54X_DMA
-	bool "DMA mode"
-	depends on PATA_BF54X
-	default y
-	help
-	  Enable DMA mode for Blackfin ATAPI controller.
-
 endif # ATA
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 6bdc307649e6..b13feb2c5dae 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_SATA_ULI)		+= sata_uli.o
 obj-$(CONFIG_SATA_MV)		+= sata_mv.o
 obj-$(CONFIG_SATA_INIC162X)	+= sata_inic162x.o
 obj-$(CONFIG_PDC_ADMA)		+= pdc_adma.o
+obj-$(CONFIG_SATA_FSL)		+= sata_fsl.o
 
 obj-$(CONFIG_PATA_ALI)		+= pata_ali.o
 obj-$(CONFIG_PATA_AMD)		+= pata_amd.o
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index c7501058d07d..f9e4cd527942 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -156,7 +156,7 @@ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 {
 	struct ata_ioports *ioaddr = &ap->ioaddr;
 
-	tf->command = ata_check_status(ap);
+	tf->command = ata_chk_status(ap);
 	tf->feature = ioread8(ioaddr->error_addr);
 	tf->nsect = ioread8(ioaddr->nsect_addr);
 	tf->lbal = ioread8(ioaddr->lbal_addr);
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 5d3920f6fd69..0f6f7bcc3def 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -370,8 +370,10 @@ static struct pci_driver pacpi_pci_driver = {
 	.id_table		= pacpi_pci_tbl,
 	.probe			= pacpi_init_one,
 	.remove			= ata_pci_remove_one,
+#ifdef CONFIG_PM
 	.suspend		= ata_pci_device_suspend,
 	.resume			= ata_pci_device_resume,
+#endif
 };
 
 static int __init pacpi_init(void)
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 747549e4563a..b5e38426b815 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1092,14 +1092,15 @@ static unsigned int bfin_bus_softreset(struct ata_port *ap,
  *	Note: Original code is ata_std_softreset().
  */
 
-static int bfin_std_softreset(struct ata_port *ap, unsigned int *classes,
+static int bfin_std_softreset(struct ata_link *link, unsigned int *classes,
 		unsigned long deadline)
 {
+	struct ata_port *ap = link->ap;
 	unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
 	unsigned int devmask = 0, err_mask;
 	u8 err;
 
-	if (ata_port_offline(ap)) {
+	if (ata_link_offline(link)) {
 		classes[0] = ATA_DEV_NONE;
 		goto out;
 	}
@@ -1122,9 +1123,11 @@ static int bfin_std_softreset(struct ata_port *ap, unsigned int *classes,
 	}
 
 	/* determine by signature whether we have ATA or ATAPI devices */
-	classes[0] = ata_dev_try_classify(ap, 0, &err);
+	classes[0] = ata_dev_try_classify(&ap->link.device[0],
+				devmask & (1 << 0), &err);
 	if (slave_possible && err != 0x81)
-		classes[1] = ata_dev_try_classify(ap, 1, &err);
+		classes[1] = ata_dev_try_classify(&ap->link.device[1],
+					devmask & (1 << 1), &err);
 
  out:
 	return 0;
@@ -1167,7 +1170,7 @@ static unsigned char bfin_bmdma_status(struct ata_port *ap)
 static void bfin_data_xfer(struct ata_device *adev, unsigned char *buf,
 			   unsigned int buflen, int write_data)
 {
-	struct ata_port *ap = adev->ap;
+	struct ata_port *ap = adev->link->ap;
 	unsigned int words = buflen >> 1;
 	unsigned short *buf16 = (u16 *) buf;
 	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
@@ -1206,7 +1209,10 @@ static void bfin_irq_clear(struct ata_port *ap)
 	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
 
 	pr_debug("in atapi irq clear\n");
-	ATAPI_SET_INT_STATUS(base, 0x1FF);
+
+	ATAPI_SET_INT_STATUS(base, ATAPI_GET_INT_STATUS(base)|ATAPI_DEV_INT
+		| MULTI_DONE_INT | UDMAIN_DONE_INT | UDMAOUT_DONE_INT
+		| MULTI_TERM_INT | UDMAIN_TERM_INT | UDMAOUT_TERM_INT);
 }
 
 /**
@@ -1234,33 +1240,6 @@ static unsigned char bfin_irq_on(struct ata_port *ap)
 }
 
 /**
- *	bfin_irq_ack - Acknowledge a device interrupt.
- *	@ap: Port on which interrupts are enabled.
- *
- *	Note: Original code is ata_irq_ack().
- */
-
-static unsigned char bfin_irq_ack(struct ata_port *ap, unsigned int chk_drq)
-{
-	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
-	unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY;
-	unsigned char status;
-
-	pr_debug("in atapi irq ack\n");
-	status = ata_busy_wait(ap, bits, 1000);
-	if (status & bits)
-		if (ata_msg_err(ap))
-			dev_err(ap->dev, "abnormal status 0x%X\n", status);
-
-	/* get controller status; clear intr, err bits */
-	ATAPI_SET_INT_STATUS(base, ATAPI_GET_INT_STATUS(base)|ATAPI_DEV_INT
-		| MULTI_DONE_INT | UDMAIN_DONE_INT | UDMAOUT_DONE_INT
-		| MULTI_TERM_INT | UDMAIN_TERM_INT | UDMAOUT_TERM_INT);
-
-	return bfin_bmdma_status(ap);
-}
-
-/**
  *	bfin_bmdma_freeze - Freeze DMA controller port
  *	@ap: port to freeze
  *
@@ -1308,8 +1287,9 @@ void bfin_bmdma_thaw(struct ata_port *ap)
  *	Note: Original code is ata_std_postreset().
  */
 
-static void bfin_std_postreset(struct ata_port *ap, unsigned int *classes)
+static void bfin_std_postreset(struct ata_link *link, unsigned int *classes)
 {
+	struct ata_port *ap = link->ap;
 	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
 
 	/* re-enable interrupts */
@@ -1395,7 +1375,6 @@ static struct scsi_host_template bfin_sht = {
 };
 
 static const struct ata_port_operations bfin_pata_ops = {
-	.port_disable		= ata_port_disable,
 	.set_piomode		= bfin_set_piomode,
 	.set_dmamode		= bfin_set_dmamode,
 
@@ -1423,7 +1402,6 @@ static const struct ata_port_operations bfin_pata_ops = {
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= bfin_irq_clear,
 	.irq_on			= bfin_irq_on,
-	.irq_ack		= bfin_irq_ack,
 
 	.port_start		= bfin_port_start,
 	.port_stop		= bfin_port_stop,
@@ -1437,11 +1415,7 @@ static struct ata_port_info bfin_port_info[] = {
 				| ATA_FLAG_NO_LEGACY,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0,
-#ifdef CONFIG_PATA_BF54X_DMA
-		.udma_mask	= ATA_UDMA5,
-#else
 		.udma_mask	= 0,
-#endif
 		.port_ops	= &bfin_pata_ops,
 	},
 };
@@ -1607,9 +1581,25 @@ static struct platform_driver bfin_atapi_driver = {
 	},
 };
 
+#define ATAPI_MODE_SIZE		10
+static char bfin_atapi_mode[ATAPI_MODE_SIZE];
+
 static int __init bfin_atapi_init(void)
 {
 	pr_info("register bfin atapi driver\n");
+
+	switch(bfin_atapi_mode[0]) {
+	case 'p':
+	case 'P':
+		break;
+	case 'm':
+	case 'M':
+		bfin_port_info[0].mwdma_mask = ATA_MWDMA2;
+		break;
+	default:
+		bfin_port_info[0].udma_mask = ATA_UDMA5;
+	};
+
 	return platform_driver_register(&bfin_atapi_driver);
 }
 
@@ -1620,6 +1610,13 @@ static void __exit bfin_atapi_exit(void)
 
 module_init(bfin_atapi_init);
 module_exit(bfin_atapi_exit);
+/*
+ * ATAPI mode:
+ * pio/PIO
+ * udma/UDMA (default)
+ * mwdma/MWDMA
+ */
+module_param_string(bfin_atapi_mode, bfin_atapi_mode, ATAPI_MODE_SIZE, 0);
 
 MODULE_AUTHOR("Sonic Zhang <sonic.zhang@analog.com>");
 MODULE_DESCRIPTION("PATA driver for blackfin 54x ATAPI controller");
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index 8d1b03d5bcb1..199f7e150eb3 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -318,7 +318,7 @@ static int adma_fill_sg(struct ata_queued_cmd *qc)
 	struct scatterlist *sg;
 	struct ata_port *ap = qc->ap;
 	struct adma_port_priv *pp = ap->private_data;
-	u8  *buf = pp->pkt;
+	u8  *buf = pp->pkt, *last_buf = NULL;
 	int i = (2 + buf[3]) * 8;
 	u8 pFLAGS = pORD | ((qc->tf.flags & ATA_TFLAG_WRITE) ? pDIRO : 0);
 
@@ -334,8 +334,7 @@ static int adma_fill_sg(struct ata_queued_cmd *qc)
 		*(__le32 *)(buf + i) = cpu_to_le32(len);
 		i += 4;
 
-		if (ata_sg_is_last(sg, qc))
-			pFLAGS |= pEND;
+		last_buf = &buf[i];
 		buf[i++] = pFLAGS;
 		buf[i++] = qc->dev->dma_mode & 0xf;
 		buf[i++] = 0;	/* pPKLW */
@@ -348,6 +347,10 @@ static int adma_fill_sg(struct ata_queued_cmd *qc)
 		VPRINTK("PRD[%u] = (0x%lX, 0x%X)\n", i/4,
 					(unsigned long)addr, len);
 	}
+
+	if (likely(last_buf))
+		*last_buf |= pEND;
+
 	return i;
 }
 
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
new file mode 100644
index 000000000000..b4c37b9e413c
--- /dev/null
+++ b/drivers/ata/sata_fsl.c
@@ -0,0 +1,1490 @@
+/*
+ * drivers/ata/sata_fsl.c
+ *
+ * Freescale 3.0Gbps SATA device driver
+ *
+ * Author: Ashish Kalra <ashish.kalra@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Copyright (c) 2006-2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <linux/libata.h>
+#include <asm/io.h>
+#include <linux/of_platform.h>
+
+/* Controller information */
+enum {
+	SATA_FSL_QUEUE_DEPTH	= 16,
+	SATA_FSL_MAX_PRD	= 63,
+	SATA_FSL_MAX_PRD_USABLE	= SATA_FSL_MAX_PRD - 1,
+	SATA_FSL_MAX_PRD_DIRECT	= 16,	/* Direct PRDT entries */
+
+	SATA_FSL_HOST_FLAGS	= (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
+				ATA_FLAG_NCQ  | ATA_FLAG_SKIP_D2H_BSY),
+
+	SATA_FSL_MAX_CMDS	= SATA_FSL_QUEUE_DEPTH,
+	SATA_FSL_CMD_HDR_SIZE	= 16,	/* 4 DWORDS */
+	SATA_FSL_CMD_SLOT_SIZE  = (SATA_FSL_MAX_CMDS * SATA_FSL_CMD_HDR_SIZE),
+
+	/*
+	 * SATA-FSL host controller supports a max. of (15+1) direct PRDEs, and
+	 * chained indirect PRDEs upto a max count of 63.
+	 * We are allocating an array of 63 PRDEs contigiously, but PRDE#15 will
+	 * be setup as an indirect descriptor, pointing to it's next
+	 * (contigious) PRDE. Though chained indirect PRDE arrays are
+	 * supported,it will be more efficient to use a direct PRDT and
+	 * a single chain/link to indirect PRDE array/PRDT.
+	 */
+
+	SATA_FSL_CMD_DESC_CFIS_SZ	= 32,
+	SATA_FSL_CMD_DESC_SFIS_SZ	= 32,
+	SATA_FSL_CMD_DESC_ACMD_SZ	= 16,
+	SATA_FSL_CMD_DESC_RSRVD		= 16,
+
+	SATA_FSL_CMD_DESC_SIZE	= (SATA_FSL_CMD_DESC_CFIS_SZ +
+				 SATA_FSL_CMD_DESC_SFIS_SZ +
+				 SATA_FSL_CMD_DESC_ACMD_SZ +
+				 SATA_FSL_CMD_DESC_RSRVD +
+				 SATA_FSL_MAX_PRD * 16),
+
+	SATA_FSL_CMD_DESC_OFFSET_TO_PRDT	=
+				(SATA_FSL_CMD_DESC_CFIS_SZ +
+				 SATA_FSL_CMD_DESC_SFIS_SZ +
+				 SATA_FSL_CMD_DESC_ACMD_SZ +
+				 SATA_FSL_CMD_DESC_RSRVD),
+
+	SATA_FSL_CMD_DESC_AR_SZ	= (SATA_FSL_CMD_DESC_SIZE * SATA_FSL_MAX_CMDS),
+	SATA_FSL_PORT_PRIV_DMA_SZ = (SATA_FSL_CMD_SLOT_SIZE +
+					SATA_FSL_CMD_DESC_AR_SZ),
+
+	/*
+	 * MPC8315 has two SATA controllers, SATA1 & SATA2
+	 * (one port per controller)
+	 * MPC837x has 2/4 controllers, one port per controller
+	 */
+
+	SATA_FSL_MAX_PORTS	= 1,
+
+	SATA_FSL_IRQ_FLAG	= IRQF_SHARED,
+};
+
+/*
+* Host Controller command register set - per port
+*/
+enum {
+	CQ = 0,
+	CA = 8,
+	CC = 0x10,
+	CE = 0x18,
+	DE = 0x20,
+	CHBA = 0x24,
+	HSTATUS = 0x28,
+	HCONTROL = 0x2C,
+	CQPMP = 0x30,
+	SIGNATURE = 0x34,
+	ICC = 0x38,
+
+	/*
+	 * Host Status Register (HStatus) bitdefs
+	 */
+	ONLINE = (1 << 31),
+	GOING_OFFLINE = (1 << 30),
+	BIST_ERR = (1 << 29),
+
+	FATAL_ERR_HC_MASTER_ERR = (1 << 18),
+	FATAL_ERR_PARITY_ERR_TX = (1 << 17),
+	FATAL_ERR_PARITY_ERR_RX = (1 << 16),
+	FATAL_ERR_DATA_UNDERRUN = (1 << 13),
+	FATAL_ERR_DATA_OVERRUN = (1 << 12),
+	FATAL_ERR_CRC_ERR_TX = (1 << 11),
+	FATAL_ERR_CRC_ERR_RX = (1 << 10),
+	FATAL_ERR_FIFO_OVRFL_TX = (1 << 9),
+	FATAL_ERR_FIFO_OVRFL_RX = (1 << 8),
+
+	FATAL_ERROR_DECODE = FATAL_ERR_HC_MASTER_ERR |
+	    FATAL_ERR_PARITY_ERR_TX |
+	    FATAL_ERR_PARITY_ERR_RX |
+	    FATAL_ERR_DATA_UNDERRUN |
+	    FATAL_ERR_DATA_OVERRUN |
+	    FATAL_ERR_CRC_ERR_TX |
+	    FATAL_ERR_CRC_ERR_RX |
+	    FATAL_ERR_FIFO_OVRFL_TX | FATAL_ERR_FIFO_OVRFL_RX,
+
+	INT_ON_FATAL_ERR = (1 << 5),
+	INT_ON_PHYRDY_CHG = (1 << 4),
+
+	INT_ON_SIGNATURE_UPDATE = (1 << 3),
+	INT_ON_SNOTIFY_UPDATE = (1 << 2),
+	INT_ON_SINGL_DEVICE_ERR = (1 << 1),
+	INT_ON_CMD_COMPLETE = 1,
+
+	INT_ON_ERROR = INT_ON_FATAL_ERR |
+	    INT_ON_PHYRDY_CHG | INT_ON_SINGL_DEVICE_ERR,
+
+	/*
+	 * Host Control Register (HControl) bitdefs
+	 */
+	HCONTROL_ONLINE_PHY_RST = (1 << 31),
+	HCONTROL_FORCE_OFFLINE = (1 << 30),
+	HCONTROL_PARITY_PROT_MOD = (1 << 14),
+	HCONTROL_DPATH_PARITY = (1 << 12),
+	HCONTROL_SNOOP_ENABLE = (1 << 10),
+	HCONTROL_PMP_ATTACHED = (1 << 9),
+	HCONTROL_COPYOUT_STATFIS = (1 << 8),
+	IE_ON_FATAL_ERR = (1 << 5),
+	IE_ON_PHYRDY_CHG = (1 << 4),
+	IE_ON_SIGNATURE_UPDATE = (1 << 3),
+	IE_ON_SNOTIFY_UPDATE = (1 << 2),
+	IE_ON_SINGL_DEVICE_ERR = (1 << 1),
+	IE_ON_CMD_COMPLETE = 1,
+
+	DEFAULT_PORT_IRQ_ENABLE_MASK = IE_ON_FATAL_ERR | IE_ON_PHYRDY_CHG |
+	    IE_ON_SIGNATURE_UPDATE |
+	    IE_ON_SINGL_DEVICE_ERR | IE_ON_CMD_COMPLETE,
+
+	EXT_INDIRECT_SEG_PRD_FLAG = (1 << 31),
+	DATA_SNOOP_ENABLE = (1 << 22),
+};
+
+/*
+ * SATA Superset Registers
+ */
+enum {
+	SSTATUS = 0,
+	SERROR = 4,
+	SCONTROL = 8,
+	SNOTIFY = 0xC,
+};
+
+/*
+ * Control Status Register Set
+ */
+enum {
+	TRANSCFG = 0,
+	TRANSSTATUS = 4,
+	LINKCFG = 8,
+	LINKCFG1 = 0xC,
+	LINKCFG2 = 0x10,
+	LINKSTATUS = 0x14,
+	LINKSTATUS1 = 0x18,
+	PHYCTRLCFG = 0x1C,
+	COMMANDSTAT = 0x20,
+};
+
+/* PHY (link-layer) configuration control */
+enum {
+	PHY_BIST_ENABLE = 0x01,
+};
+
+/*
+ * Command Header Table entry, i.e, command slot
+ * 4 Dwords per command slot, command header size ==  64 Dwords.
+ */
+struct cmdhdr_tbl_entry {
+	u32 cda;
+	u32 prde_fis_len;
+	u32 ttl;
+	u32 desc_info;
+};
+
+/*
+ * Description information bitdefs
+ */
+enum {
+	VENDOR_SPECIFIC_BIST = (1 << 10),
+	CMD_DESC_SNOOP_ENABLE = (1 << 9),
+	FPDMA_QUEUED_CMD = (1 << 8),
+	SRST_CMD = (1 << 7),
+	BIST = (1 << 6),
+	ATAPI_CMD = (1 << 5),
+};
+
+/*
+ * Command Descriptor
+ */
+struct command_desc {
+	u8 cfis[8 * 4];
+	u8 sfis[8 * 4];
+	u8 acmd[4 * 4];
+	u8 fill[4 * 4];
+	u32 prdt[SATA_FSL_MAX_PRD_DIRECT * 4];
+	u32 prdt_indirect[(SATA_FSL_MAX_PRD - SATA_FSL_MAX_PRD_DIRECT) * 4];
+};
+
+/*
+ * Physical region table descriptor(PRD)
+ */
+
+struct prde {
+	u32 dba;
+	u8 fill[2 * 4];
+	u32 ddc_and_ext;
+};
+
+/*
+ * ata_port private data
+ * This is our per-port instance data.
+ */
+struct sata_fsl_port_priv {
+	struct cmdhdr_tbl_entry *cmdslot;
+	dma_addr_t cmdslot_paddr;
+	struct command_desc *cmdentry;
+	dma_addr_t cmdentry_paddr;
+
+	/*
+	 * SATA FSL controller has a Status FIS which should contain the
+	 * received D2H FIS & taskfile registers. This SFIS is present in
+	 * the command descriptor, and to have a ready reference to it,
+	 * we are caching it here, quite similar to what is done in H/W on
+	 * AHCI compliant devices by copying taskfile fields to a 32-bit
+	 * register.
+	 */
+
+	struct ata_taskfile tf;
+};
+
+/*
+ * ata_port->host_set private data
+ */
+struct sata_fsl_host_priv {
+	void __iomem *hcr_base;
+	void __iomem *ssr_base;
+	void __iomem *csr_base;
+};
+
+static inline unsigned int sata_fsl_tag(unsigned int tag,
+					void __iomem * hcr_base)
+{
+	/* We let libATA core do actual (queue) tag allocation */
+
+	/* all non NCQ/queued commands should have tag#0 */
+	if (ata_tag_internal(tag)) {
+		DPRINTK("mapping internal cmds to tag#0\n");
+		return 0;
+	}
+
+	if (unlikely(tag >= SATA_FSL_QUEUE_DEPTH)) {
+		DPRINTK("tag %d invalid : out of range\n", tag);
+		return 0;
+	}
+
+	if (unlikely((ioread32(hcr_base + CQ)) & (1 << tag))) {
+		DPRINTK("tag %d invalid : in use!!\n", tag);
+		return 0;
+	}
+
+	return tag;
+}
+
+static void sata_fsl_setup_cmd_hdr_entry(struct sata_fsl_port_priv *pp,
+					 unsigned int tag, u32 desc_info,
+					 u32 data_xfer_len, u8 num_prde,
+					 u8 fis_len)
+{
+	dma_addr_t cmd_descriptor_address;
+
+	cmd_descriptor_address = pp->cmdentry_paddr +
+	    tag * SATA_FSL_CMD_DESC_SIZE;
+
+	/* NOTE: both data_xfer_len & fis_len are Dword counts */
+
+	pp->cmdslot[tag].cda = cpu_to_le32(cmd_descriptor_address);
+	pp->cmdslot[tag].prde_fis_len =
+	    cpu_to_le32((num_prde << 16) | (fis_len << 2));
+	pp->cmdslot[tag].ttl = cpu_to_le32(data_xfer_len & ~0x03);
+	pp->cmdslot[tag].desc_info = cpu_to_le32((desc_info | (tag & 0x1F)));
+
+	VPRINTK("cda=0x%x, prde_fis_len=0x%x, ttl=0x%x, di=0x%x\n",
+		pp->cmdslot[tag].cda,
+		pp->cmdslot[tag].prde_fis_len,
+		pp->cmdslot[tag].ttl, pp->cmdslot[tag].desc_info);
+
+}
+
+static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc,
+				     u32 * ttl, dma_addr_t cmd_desc_paddr)
+{
+	struct scatterlist *sg;
+	unsigned int num_prde = 0;
+	u32 ttl_dwords = 0;
+
+	/*
+	 * NOTE : direct & indirect prdt's are contigiously allocated
+	 */
+	struct prde *prd = (struct prde *)&((struct command_desc *)
+					    cmd_desc)->prdt;
+
+	struct prde *prd_ptr_to_indirect_ext = NULL;
+	unsigned indirect_ext_segment_sz = 0;
+	dma_addr_t indirect_ext_segment_paddr;
+
+	VPRINTK("SATA FSL : cd = 0x%x, prd = 0x%x\n", cmd_desc, prd);
+
+	indirect_ext_segment_paddr = cmd_desc_paddr +
+	    SATA_FSL_CMD_DESC_OFFSET_TO_PRDT + SATA_FSL_MAX_PRD_DIRECT * 16;
+
+	ata_for_each_sg(sg, qc) {
+		dma_addr_t sg_addr = sg_dma_address(sg);
+		u32 sg_len = sg_dma_len(sg);
+
+		VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%x, sg_len = %d\n",
+			sg_addr, sg_len);
+
+		/* warn if each s/g element is not dword aligned */
+		if (sg_addr & 0x03)
+			ata_port_printk(qc->ap, KERN_ERR,
+					"s/g addr unaligned : 0x%x\n", sg_addr);
+		if (sg_len & 0x03)
+			ata_port_printk(qc->ap, KERN_ERR,
+					"s/g len unaligned : 0x%x\n", sg_len);
+
+		if ((num_prde == (SATA_FSL_MAX_PRD_DIRECT - 1)) &&
+		    !ata_sg_is_last(sg, qc)) {
+			VPRINTK("setting indirect prde\n");
+			prd_ptr_to_indirect_ext = prd;
+			prd->dba = cpu_to_le32(indirect_ext_segment_paddr);
+			indirect_ext_segment_sz = 0;
+			++prd;
+			++num_prde;
+		}
+
+		ttl_dwords += sg_len;
+		prd->dba = cpu_to_le32(sg_addr);
+		prd->ddc_and_ext =
+		    cpu_to_le32(DATA_SNOOP_ENABLE | (sg_len & ~0x03));
+
+		VPRINTK("sg_fill, ttl=%d, dba=0x%x, ddc=0x%x\n",
+			ttl_dwords, prd->dba, prd->ddc_and_ext);
+
+		++num_prde;
+		++prd;
+		if (prd_ptr_to_indirect_ext)
+			indirect_ext_segment_sz += sg_len;
+	}
+
+	if (prd_ptr_to_indirect_ext) {
+		/* set indirect extension flag along with indirect ext. size */
+		prd_ptr_to_indirect_ext->ddc_and_ext =
+		    cpu_to_le32((EXT_INDIRECT_SEG_PRD_FLAG |
+				 DATA_SNOOP_ENABLE |
+				 (indirect_ext_segment_sz & ~0x03)));
+	}
+
+	*ttl = ttl_dwords;
+	return num_prde;
+}
+
+static void sata_fsl_qc_prep(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct sata_fsl_port_priv *pp = ap->private_data;
+	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+	void __iomem *hcr_base = host_priv->hcr_base;
+	unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
+	struct command_desc *cd;
+	u32 desc_info = CMD_DESC_SNOOP_ENABLE;
+	u32 num_prde = 0;
+	u32 ttl_dwords = 0;
+	dma_addr_t cd_paddr;
+
+	cd = (struct command_desc *)pp->cmdentry + tag;
+	cd_paddr = pp->cmdentry_paddr + tag * SATA_FSL_CMD_DESC_SIZE;
+
+	ata_tf_to_fis(&qc->tf, 0, 1, (u8 *) & cd->cfis);
+
+	VPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x\n",
+		cd->cfis[0], cd->cfis[1], cd->cfis[2]);
+
+	if (qc->tf.protocol == ATA_PROT_NCQ) {
+		VPRINTK("FPDMA xfer,Sctor cnt[0:7],[8:15] = %d,%d\n",
+			cd->cfis[3], cd->cfis[11]);
+	}
+
+	/* setup "ACMD - atapi command" in cmd. desc. if this is ATAPI cmd */
+	if (is_atapi_taskfile(&qc->tf)) {
+		desc_info |= ATAPI_CMD;
+		memset((void *)&cd->acmd, 0, 32);
+		memcpy((void *)&cd->acmd, qc->cdb, qc->dev->cdb_len);
+	}
+
+	if (qc->flags & ATA_QCFLAG_DMAMAP)
+		num_prde = sata_fsl_fill_sg(qc, (void *)cd,
+					    &ttl_dwords, cd_paddr);
+
+	if (qc->tf.protocol == ATA_PROT_NCQ)
+		desc_info |= FPDMA_QUEUED_CMD;
+
+	sata_fsl_setup_cmd_hdr_entry(pp, tag, desc_info, ttl_dwords,
+				     num_prde, 5);
+
+	VPRINTK("SATA FSL : xx_qc_prep, di = 0x%x, ttl = %d, num_prde = %d\n",
+		desc_info, ttl_dwords, num_prde);
+}
+
+static unsigned int sata_fsl_qc_issue(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+	void __iomem *hcr_base = host_priv->hcr_base;
+	unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
+
+	VPRINTK("xx_qc_issue called,CQ=0x%x,CA=0x%x,CE=0x%x,CC=0x%x\n",
+		ioread32(CQ + hcr_base),
+		ioread32(CA + hcr_base),
+		ioread32(CE + hcr_base), ioread32(CC + hcr_base));
+
+	/* Simply queue command to the controller/device */
+	iowrite32(1 << tag, CQ + hcr_base);
+
+	VPRINTK("xx_qc_issue called, tag=%d, CQ=0x%x, CA=0x%x\n",
+		tag, ioread32(CQ + hcr_base), ioread32(CA + hcr_base));
+
+	VPRINTK("CE=0x%x, DE=0x%x, CC=0x%x, CmdStat = 0x%x\n",
+		ioread32(CE + hcr_base),
+		ioread32(DE + hcr_base),
+		ioread32(CC + hcr_base), ioread32(COMMANDSTAT + csr_base));
+
+	return 0;
+}
+
+static int sata_fsl_scr_write(struct ata_port *ap, unsigned int sc_reg_in,
+			       u32 val)
+{
+	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+	void __iomem *ssr_base = host_priv->ssr_base;
+	unsigned int sc_reg;
+
+	switch (sc_reg_in) {
+	case SCR_STATUS:
+		sc_reg = 0;
+		break;
+	case SCR_ERROR:
+		sc_reg = 1;
+		break;
+	case SCR_CONTROL:
+		sc_reg = 2;
+		break;
+	case SCR_ACTIVE:
+		sc_reg = 3;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	VPRINTK("xx_scr_write, reg_in = %d\n", sc_reg);
+
+	iowrite32(val, (void __iomem *)ssr_base + (sc_reg * 4));
+	return 0;
+}
+
+static int sata_fsl_scr_read(struct ata_port *ap, unsigned int sc_reg_in,
+			u32 *val)
+{
+	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+	void __iomem *ssr_base = host_priv->ssr_base;
+	unsigned int sc_reg;
+
+	switch (sc_reg_in) {
+	case SCR_STATUS:
+		sc_reg = 0;
+		break;
+	case SCR_ERROR:
+		sc_reg = 1;
+		break;
+	case SCR_CONTROL:
+		sc_reg = 2;
+		break;
+	case SCR_ACTIVE:
+		sc_reg = 3;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	VPRINTK("xx_scr_read, reg_in = %d\n", sc_reg);
+
+	*val = ioread32((void __iomem *)ssr_base + (sc_reg * 4));
+	return 0;
+}
+
+static void sata_fsl_freeze(struct ata_port *ap)
+{
+	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+	void __iomem *hcr_base = host_priv->hcr_base;
+	u32 temp;
+
+	VPRINTK("xx_freeze, CQ=0x%x, CA=0x%x, CE=0x%x, DE=0x%x\n",
+		ioread32(CQ + hcr_base),
+		ioread32(CA + hcr_base),
+		ioread32(CE + hcr_base), ioread32(DE + hcr_base));
+	VPRINTK("CmdStat = 0x%x\n", ioread32(csr_base + COMMANDSTAT));
+
+	/* disable interrupts on the controller/port */
+	temp = ioread32(hcr_base + HCONTROL);
+	iowrite32((temp & ~0x3F), hcr_base + HCONTROL);
+
+	VPRINTK("in xx_freeze : HControl = 0x%x, HStatus = 0x%x\n",
+		ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS));
+}
+
+static void sata_fsl_thaw(struct ata_port *ap)
+{
+	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+	void __iomem *hcr_base = host_priv->hcr_base;
+	u32 temp;
+
+	/* ack. any pending IRQs for this controller/port */
+	temp = ioread32(hcr_base + HSTATUS);
+
+	VPRINTK("xx_thaw, pending IRQs = 0x%x\n", (temp & 0x3F));
+
+	if (temp & 0x3F)
+		iowrite32((temp & 0x3F), hcr_base + HSTATUS);
+
+	/* enable interrupts on the controller/port */
+	temp = ioread32(hcr_base + HCONTROL);
+	iowrite32((temp | DEFAULT_PORT_IRQ_ENABLE_MASK), hcr_base + HCONTROL);
+
+	VPRINTK("xx_thaw : HControl = 0x%x, HStatus = 0x%x\n",
+		ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS));
+}
+
+/*
+ * NOTE : 1st D2H FIS from device does not update sfis in command descriptor.
+ */
+static inline void sata_fsl_cache_taskfile_from_d2h_fis(struct ata_queued_cmd
+							*qc,
+							struct ata_port *ap)
+{
+	struct sata_fsl_port_priv *pp = ap->private_data;
+	u8 fis[6 * 4];
+	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+	void __iomem *hcr_base = host_priv->hcr_base;
+	unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
+	struct command_desc *cd;
+
+	cd = pp->cmdentry + tag;
+
+	memcpy(fis, &cd->sfis, 6 * 4);	/* should we use memcpy_from_io() */
+	ata_tf_from_fis(fis, &pp->tf);
+}
+
+static u8 sata_fsl_check_status(struct ata_port *ap)
+{
+	struct sata_fsl_port_priv *pp = ap->private_data;
+
+	return pp->tf.command;
+}
+
+static void sata_fsl_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+	struct sata_fsl_port_priv *pp = ap->private_data;
+
+	*tf = pp->tf;
+}
+
+static int sata_fsl_port_start(struct ata_port *ap)
+{
+	struct device *dev = ap->host->dev;
+	struct sata_fsl_port_priv *pp;
+	int retval;
+	void *mem;
+	dma_addr_t mem_dma;
+	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+	void __iomem *hcr_base = host_priv->hcr_base;
+	u32 temp;
+
+	pp = kzalloc(sizeof(*pp), GFP_KERNEL);
+	if (!pp)
+		return -ENOMEM;
+
+	/*
+	 * allocate per command dma alignment pad buffer, which is used
+	 * internally by libATA to ensure that all transfers ending on
+	 * unaligned boundaries are padded, to align on Dword boundaries
+	 */
+	retval = ata_pad_alloc(ap, dev);
+	if (retval) {
+		kfree(pp);
+		return retval;
+	}
+
+	mem = dma_alloc_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ, &mem_dma,
+				 GFP_KERNEL);
+	if (!mem) {
+		ata_pad_free(ap, dev);
+		kfree(pp);
+		return -ENOMEM;
+	}
+	memset(mem, 0, SATA_FSL_PORT_PRIV_DMA_SZ);
+
+	pp->cmdslot = mem;
+	pp->cmdslot_paddr = mem_dma;
+
+	mem += SATA_FSL_CMD_SLOT_SIZE;
+	mem_dma += SATA_FSL_CMD_SLOT_SIZE;
+
+	pp->cmdentry = mem;
+	pp->cmdentry_paddr = mem_dma;
+
+	ap->private_data = pp;
+
+	VPRINTK("CHBA = 0x%x, cmdentry_phys = 0x%x\n",
+		pp->cmdslot_paddr, pp->cmdentry_paddr);
+
+	/* Now, update the CHBA register in host controller cmd register set */
+	iowrite32(pp->cmdslot_paddr & 0xffffffff, hcr_base + CHBA);
+
+	/*
+	 * Now, we can bring the controller on-line & also initiate
+	 * the COMINIT sequence, we simply return here and the boot-probing
+	 * & device discovery process is re-initiated by libATA using a
+	 * Softreset EH (dummy) session. Hence, boot probing and device
+	 * discovey will be part of sata_fsl_softreset() callback.
+	 */
+
+	temp = ioread32(hcr_base + HCONTROL);
+	iowrite32((temp | HCONTROL_ONLINE_PHY_RST), hcr_base + HCONTROL);
+
+	VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
+	VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
+	VPRINTK("CHBA  = 0x%x\n", ioread32(hcr_base + CHBA));
+
+	/*
+	 * Workaround for 8315DS board 3gbps link-up issue,
+	 * currently limit SATA port to GEN1 speed
+	 */
+	sata_fsl_scr_read(ap, SCR_CONTROL, &temp);
+	temp &= ~(0xF << 4);
+	temp |= (0x1 << 4);
+	sata_fsl_scr_write(ap, SCR_CONTROL, temp);
+
+	sata_fsl_scr_read(ap, SCR_CONTROL, &temp);
+	dev_printk(KERN_WARNING, dev, "scr_control, speed limited to %x\n",
+			temp);
+
+	return 0;
+}
+
+static void sata_fsl_port_stop(struct ata_port *ap)
+{
+	struct device *dev = ap->host->dev;
+	struct sata_fsl_port_priv *pp = ap->private_data;
+	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+	void __iomem *hcr_base = host_priv->hcr_base;
+	u32 temp;
+
+	/*
+	 * Force host controller to go off-line, aborting current operations
+	 */
+	temp = ioread32(hcr_base + HCONTROL);
+	temp &= ~HCONTROL_ONLINE_PHY_RST;
+	temp |= HCONTROL_FORCE_OFFLINE;
+	iowrite32(temp, hcr_base + HCONTROL);
+
+	/* Poll for controller to go offline - should happen immediately */
+	ata_wait_register(hcr_base + HSTATUS, ONLINE, ONLINE, 1, 1);
+
+	ap->private_data = NULL;
+	dma_free_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ,
+			  pp->cmdslot, pp->cmdslot_paddr);
+
+	ata_pad_free(ap, dev);
+	kfree(pp);
+}
+
+static unsigned int sata_fsl_dev_classify(struct ata_port *ap)
+{
+	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+	void __iomem *hcr_base = host_priv->hcr_base;
+	struct ata_taskfile tf;
+	u32 temp;
+
+	temp = ioread32(hcr_base + SIGNATURE);
+
+	VPRINTK("raw sig = 0x%x\n", temp);
+	VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
+	VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
+
+	tf.lbah = (temp >> 24) & 0xff;
+	tf.lbam = (temp >> 16) & 0xff;
+	tf.lbal = (temp >> 8) & 0xff;
+	tf.nsect = temp & 0xff;
+
+	return ata_dev_classify(&tf);
+}
+
+static int sata_fsl_softreset(struct ata_port *ap, unsigned int *class,
+			      unsigned long deadline)
+{
+	struct sata_fsl_port_priv *pp = ap->private_data;
+	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+	void __iomem *hcr_base = host_priv->hcr_base;
+	u32 temp;
+	struct ata_taskfile tf;
+	u8 *cfis;
+	u32 Serror;
+	int i = 0;
+	struct ata_queued_cmd qc;
+	u8 *buf;
+	dma_addr_t dma_address;
+	struct scatterlist *sg;
+	unsigned long start_jiffies;
+
+	DPRINTK("in xx_softreset\n");
+
+try_offline_again:
+	/*
+	 * Force host controller to go off-line, aborting current operations
+	 */
+	temp = ioread32(hcr_base + HCONTROL);
+	temp &= ~HCONTROL_ONLINE_PHY_RST;
+	iowrite32(temp, hcr_base + HCONTROL);
+
+	/* Poll for controller to go offline */
+	temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, ONLINE, 1, 500);
+
+	if (temp & ONLINE) {
+		ata_port_printk(ap, KERN_ERR,
+				"Softreset failed, not off-lined %d\n", i);
+
+		/*
+		 * Try to offline controller atleast twice
+		 */
+		i++;
+		if (i == 2)
+			goto err;
+		else
+			goto try_offline_again;
+	}
+
+	DPRINTK("softreset, controller off-lined\n");
+	VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
+	VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
+
+	/*
+	 * PHY reset should remain asserted for atleast 1ms
+	 */
+	msleep(1);
+
+	/*
+	 * Now, bring the host controller online again, this can take time
+	 * as PHY reset and communication establishment, 1st D2H FIS and
+	 * device signature update is done, on safe side assume 500ms
+	 * NOTE : Host online status may be indicated immediately!!
+	 */
+
+	temp = ioread32(hcr_base + HCONTROL);
+	temp |= (HCONTROL_ONLINE_PHY_RST | HCONTROL_SNOOP_ENABLE);
+	iowrite32(temp, hcr_base + HCONTROL);
+
+	temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, 0, 1, 500);
+
+	if (!(temp & ONLINE)) {
+		ata_port_printk(ap, KERN_ERR,
+				"Softreset failed, not on-lined\n");
+		goto err;
+	}
+
+	DPRINTK("softreset, controller off-lined & on-lined\n");
+	VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
+	VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
+
+	/*
+	 * First, wait for the PHYRDY change to occur before waiting for
+	 * the signature, and also verify if SStatus indicates device
+	 * presence
+	 */
+
+	temp = ata_wait_register(hcr_base + HSTATUS, 0xFF, 0, 1, 500);
+	if ((!(temp & 0x10)) || ata_port_offline(ap)) {
+		ata_port_printk(ap, KERN_WARNING,
+				"No Device OR PHYRDY change,Hstatus = 0x%x\n",
+				ioread32(hcr_base + HSTATUS));
+		goto err;
+	}
+
+	/*
+	 * Wait for the first D2H from device,i.e,signature update notification
+	 */
+	start_jiffies = jiffies;
+	temp = ata_wait_register(hcr_base + HSTATUS, 0xFF, 0x10,
+			500, jiffies_to_msecs(deadline - start_jiffies));
+
+	if ((temp & 0xFF) != 0x18) {
+		ata_port_printk(ap, KERN_WARNING, "No Signature Update\n");
+		goto err;
+	} else {
+		ata_port_printk(ap, KERN_INFO,
+				"Signature Update detected @ %d msecs\n",
+				jiffies_to_msecs(jiffies - start_jiffies));
+	}
+
+	/*
+	 * Send a device reset (SRST) explicitly on command slot #0
+	 * Check : will the command queue (reg) be cleared during offlining ??
+	 * Also we will be online only if Phy commn. has been established
+	 * and device presence has been detected, therefore if we have
+	 * reached here, we can send a command to the target device
+	 */
+
+	if (ap->sactive)
+		goto skip_srst_do_ncq_error_handling;
+
+	DPRINTK("Sending SRST/device reset\n");
+
+	ata_tf_init(ap->device, &tf);
+	cfis = (u8 *) & pp->cmdentry->cfis;
+
+	/* device reset/SRST is a control register update FIS, uses tag0 */
+	sata_fsl_setup_cmd_hdr_entry(pp, 0,
+				     SRST_CMD | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
+
+	tf.ctl |= ATA_SRST;	/* setup SRST bit in taskfile control reg */
+	ata_tf_to_fis(&tf, 0, 0, cfis);
+
+	DPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x, 0x%x\n",
+		cfis[0], cfis[1], cfis[2], cfis[3]);
+
+	/*
+	 * Queue SRST command to the controller/device, ensure that no
+	 * other commands are active on the controller/device
+	 */
+
+	DPRINTK("@Softreset, CQ = 0x%x, CA = 0x%x, CC = 0x%x\n",
+		ioread32(CQ + hcr_base),
+		ioread32(CA + hcr_base), ioread32(CC + hcr_base));
+
+	iowrite32(0xFFFF, CC + hcr_base);
+	iowrite32(1, CQ + hcr_base);
+
+	temp = ata_wait_register(CQ + hcr_base, 0x1, 0x1, 1, 5000);
+	if (temp & 0x1) {
+		ata_port_printk(ap, KERN_WARNING, "ATA_SRST issue failed\n");
+
+		DPRINTK("Softreset@5000,CQ=0x%x,CA=0x%x,CC=0x%x\n",
+			ioread32(CQ + hcr_base),
+			ioread32(CA + hcr_base), ioread32(CC + hcr_base));
+
+		sata_fsl_scr_read(ap, SCR_ERROR, &Serror);
+
+		DPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
+		DPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
+		DPRINTK("Serror = 0x%x\n", Serror);
+		goto err;
+	}
+
+	msleep(1);
+
+	/*
+	 * SATA device enters reset state after receving a Control register
+	 * FIS with SRST bit asserted and it awaits another H2D Control reg.
+	 * FIS with SRST bit cleared, then the device does internal diags &
+	 * initialization, followed by indicating it's initialization status
+	 * using ATA signature D2H register FIS to the host controller.
+	 */
+
+	sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
+
+	tf.ctl &= ~ATA_SRST;	/* 2nd H2D Ctl. register FIS */
+	ata_tf_to_fis(&tf, 0, 0, cfis);
+
+	iowrite32(1, CQ + hcr_base);
+	msleep(150);		/* ?? */
+
+	/*
+	 * The above command would have signalled an interrupt on command
+	 * complete, which needs special handling, by clearing the Nth
+	 * command bit of the CCreg
+	 */
+	iowrite32(0x01, CC + hcr_base);	/* We know it will be cmd#0 always */
+	goto check_device_signature;
+
+skip_srst_do_ncq_error_handling:
+
+	VPRINTK("Sending read log ext(10h) command\n");
+
+	memset(&qc, 0, sizeof(struct ata_queued_cmd));
+	ata_tf_init(ap->device, &tf);
+
+	tf.command = ATA_CMD_READ_LOG_EXT;
+	tf.lbal = ATA_LOG_SATA_NCQ;
+	tf.nsect = 1;
+	tf.hob_nsect = 0;
+	tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE;
+	tf.protocol = ATA_PROT_PIO;
+
+	qc.tag = ATA_TAG_INTERNAL;
+	qc.scsicmd = NULL;
+	qc.ap = ap;
+	qc.dev = ap->device;
+
+	qc.tf = tf;
+	qc.flags |= ATA_QCFLAG_RESULT_TF;
+	qc.dma_dir = DMA_FROM_DEVICE;
+
+	buf = ap->sector_buf;
+	ata_sg_init_one(&qc, buf, 1 * ATA_SECT_SIZE);
+
+	/*
+	 * Need to DMA-map the memory buffer associated with the command
+	 */
+
+	sg = qc.__sg;
+	dma_address = dma_map_single(ap->dev, qc.buf_virt,
+				     sg->length, DMA_FROM_DEVICE);
+
+	sg_dma_address(sg) = dma_address;
+	sg_dma_len(sg) = sg->length;
+
+	VPRINTK("EH, addr = 0x%x, len = 0x%x\n", dma_address, sg->length);
+
+	sata_fsl_qc_prep(&qc);
+	sata_fsl_qc_issue(&qc);
+
+	temp = ata_wait_register(CQ + hcr_base, 0x1, 0x1, 1, 5000);
+	if (temp & 0x1) {
+		VPRINTK("READ_LOG_EXT_10H issue failed\n");
+
+		VPRINTK("READ_LOG@5000,CQ=0x%x,CA=0x%x,CC=0x%x\n",
+			ioread32(CQ + hcr_base),
+			ioread32(CA + hcr_base), ioread32(CC + hcr_base));
+
+		sata_fsl_scr_read(ap, SCR_ERROR, &Serror);
+
+		VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
+		VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
+		VPRINTK("Serror = 0x%x\n", Serror);
+		goto err;
+	}
+
+	iowrite32(0x01, CC + hcr_base);	/* We know it will be cmd#0 always */
+
+      check_device_signature:
+
+	DPRINTK("SATA FSL : Now checking device signature\n");
+
+	*class = ATA_DEV_NONE;
+
+	/* Verify if SStatus indicates device presence */
+	if (ata_port_online(ap)) {
+		/*
+		 * if we are here, device presence has been detected,
+		 * 1st D2H FIS would have been received, but sfis in
+		 * command desc. is not updated, but signature register
+		 * would have been updated
+		 */
+
+		*class = sata_fsl_dev_classify(ap);
+
+		DPRINTK("class = %d\n", *class);
+		VPRINTK("ccreg = 0x%x\n", ioread32(hcr_base + CC));
+		VPRINTK("cereg = 0x%x\n", ioread32(hcr_base + CE));
+	}
+
+	return 0;
+
+err:
+	return -EIO;
+}
+
+static int sata_fsl_hardreset(struct ata_port *ap, unsigned int *class,
+			      unsigned long deadline)
+{
+	int retval;
+
+	retval = sata_std_hardreset(ap, class, deadline);
+
+	DPRINTK("SATA FSL : in xx_hardreset, retval = 0x%d\n", retval);
+
+	return retval;
+}
+
+static void sata_fsl_error_handler(struct ata_port *ap)
+{
+
+	DPRINTK("in xx_error_handler\n");
+
+	/* perform recovery */
+	ata_do_eh(ap, ata_std_prereset, sata_fsl_softreset, sata_fsl_hardreset,
+		  ata_std_postreset);
+}
+
+static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+	if (qc->flags & ATA_QCFLAG_FAILED)
+		qc->err_mask |= AC_ERR_OTHER;
+
+	if (qc->err_mask) {
+		/* make DMA engine forget about the failed command */
+
+	}
+}
+
+static void sata_fsl_irq_clear(struct ata_port *ap)
+{
+	/* unused */
+}
+
+static void sata_fsl_error_intr(struct ata_port *ap)
+{
+	struct ata_eh_info *ehi = &ap->eh_info;
+	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+	void __iomem *hcr_base = host_priv->hcr_base;
+	u32 hstatus, dereg, cereg = 0, SError = 0;
+	unsigned int err_mask = 0, action = 0;
+	struct ata_queued_cmd *qc;
+	int freeze = 0;
+
+	hstatus = ioread32(hcr_base + HSTATUS);
+	cereg = ioread32(hcr_base + CE);
+
+	ata_ehi_clear_desc(ehi);
+
+	/*
+	 * Handle & Clear SError
+	 */
+
+	sata_fsl_scr_read(ap, SCR_ERROR, &SError);
+	if (unlikely(SError & 0xFFFF0000)) {
+		sata_fsl_scr_write(ap, SCR_ERROR, SError);
+		err_mask |= AC_ERR_ATA_BUS;
+	}
+
+	DPRINTK("error_intr,hStat=0x%x,CE=0x%x,DE =0x%x,SErr=0x%x\n",
+		hstatus, cereg, ioread32(hcr_base + DE), SError);
+
+	/* handle single device errors */
+	if (cereg) {
+		/*
+		 * clear the command error, also clears queue to the device
+		 * in error, and we can (re)issue commands to this device.
+		 * When a device is in error all commands queued into the
+		 * host controller and at the device are considered aborted
+		 * and the queue for that device is stopped. Now, after
+		 * clearing the device error, we can issue commands to the
+		 * device to interrogate it to find the source of the error.
+		 */
+		dereg = ioread32(hcr_base + DE);
+		iowrite32(dereg, hcr_base + DE);
+		iowrite32(cereg, hcr_base + CE);
+
+		DPRINTK("single device error, CE=0x%x, DE=0x%x\n",
+			ioread32(hcr_base + CE), ioread32(hcr_base + DE));
+		/*
+		 * We should consider this as non fatal error, and TF must
+		 * be updated as done below.
+		 */
+
+		err_mask |= AC_ERR_DEV;
+	}
+
+	/* handle fatal errors */
+	if (hstatus & FATAL_ERROR_DECODE) {
+		err_mask |= AC_ERR_ATA_BUS;
+		action |= ATA_EH_SOFTRESET;
+		/* how will fatal error interrupts be completed ?? */
+		freeze = 1;
+	}
+
+	/* Handle PHYRDY change notification */
+	if (hstatus & INT_ON_PHYRDY_CHG) {
+		DPRINTK("SATA FSL: PHYRDY change indication\n");
+
+		/* Setup a soft-reset EH action */
+		ata_ehi_hotplugged(ehi);
+		freeze = 1;
+	}
+
+	/* record error info */
+	qc = ata_qc_from_tag(ap, ap->active_tag);
+
+	if (qc) {
+		sata_fsl_cache_taskfile_from_d2h_fis(qc, qc->ap);
+		qc->err_mask |= err_mask;
+	} else
+		ehi->err_mask |= err_mask;
+
+	ehi->action |= action;
+	ehi->serror |= SError;
+
+	/* freeze or abort */
+	if (freeze)
+		ata_port_freeze(ap);
+	else
+		ata_port_abort(ap);
+}
+
+static void sata_fsl_qc_complete(struct ata_queued_cmd *qc)
+{
+	if (qc->flags & ATA_QCFLAG_RESULT_TF) {
+		DPRINTK("xx_qc_complete called\n");
+		sata_fsl_cache_taskfile_from_d2h_fis(qc, qc->ap);
+	}
+}
+
+static void sata_fsl_host_intr(struct ata_port *ap)
+{
+	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+	void __iomem *hcr_base = host_priv->hcr_base;
+	u32 hstatus, qc_active = 0;
+	struct ata_queued_cmd *qc;
+	u32 SError;
+
+	hstatus = ioread32(hcr_base + HSTATUS);
+
+	sata_fsl_scr_read(ap, SCR_ERROR, &SError);
+
+	if (unlikely(SError & 0xFFFF0000)) {
+		DPRINTK("serror @host_intr : 0x%x\n", SError);
+		sata_fsl_error_intr(ap);
+
+	}
+
+	if (unlikely(hstatus & INT_ON_ERROR)) {
+		DPRINTK("error interrupt!!\n");
+		sata_fsl_error_intr(ap);
+		return;
+	}
+
+	if (ap->sactive) {	/* only true for NCQ commands */
+		int i;
+		/* Read command completed register */
+		qc_active = ioread32(hcr_base + CC);
+		/* clear CC bit, this will also complete the interrupt */
+		iowrite32(qc_active, hcr_base + CC);
+
+		DPRINTK("Status of all queues :\n");
+		DPRINTK("qc_active/CC = 0x%x, CA = 0x%x, CE=0x%x\n",
+			qc_active, ioread32(hcr_base + CA),
+			ioread32(hcr_base + CE));
+
+		for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) {
+			if (qc_active & (1 << i)) {
+				qc = ata_qc_from_tag(ap, i);
+				if (qc) {
+					sata_fsl_qc_complete(qc);
+					ata_qc_complete(qc);
+				}
+				DPRINTK
+				    ("completing ncq cmd,tag=%d,CC=0x%x,CA=0x%x\n",
+				     i, ioread32(hcr_base + CC),
+				     ioread32(hcr_base + CA));
+			}
+		}
+		return;
+
+	} else if (ap->qc_active) {
+		iowrite32(1, hcr_base + CC);
+		qc = ata_qc_from_tag(ap, ap->active_tag);
+
+		DPRINTK("completing non-ncq cmd, tag=%d,CC=0x%x\n",
+			ap->active_tag, ioread32(hcr_base + CC));
+
+		if (qc) {
+			sata_fsl_qc_complete(qc);
+			ata_qc_complete(qc);
+		}
+	} else {
+		/* Spurious Interrupt!! */
+		DPRINTK("spurious interrupt!!, CC = 0x%x\n",
+			ioread32(hcr_base + CC));
+		return;
+	}
+}
+
+static irqreturn_t sata_fsl_interrupt(int irq, void *dev_instance)
+{
+	struct ata_host *host = dev_instance;
+	struct sata_fsl_host_priv *host_priv = host->private_data;
+	void __iomem *hcr_base = host_priv->hcr_base;
+	u32 interrupt_enables;
+	unsigned handled = 0;
+	struct ata_port *ap;
+
+	/* ack. any pending IRQs for this controller/port */
+	interrupt_enables = ioread32(hcr_base + HSTATUS);
+	interrupt_enables &= 0x3F;
+
+	DPRINTK("interrupt status 0x%x\n", interrupt_enables);
+
+	if (!interrupt_enables)
+		return IRQ_NONE;
+
+	spin_lock(&host->lock);
+
+	/* Assuming one port per host controller */
+
+	ap = host->ports[0];
+	if (ap) {
+		sata_fsl_host_intr(ap);
+	} else {
+		dev_printk(KERN_WARNING, host->dev,
+			   "interrupt on disabled port 0\n");
+	}
+
+	iowrite32(interrupt_enables, hcr_base + HSTATUS);
+	handled = 1;
+
+	spin_unlock(&host->lock);
+
+	return IRQ_RETVAL(handled);
+}
+
+/*
+ * Multiple ports are represented by multiple SATA controllers with
+ * one port per controller
+ */
+static int sata_fsl_init_controller(struct ata_host *host)
+{
+	struct sata_fsl_host_priv *host_priv = host->private_data;
+	void __iomem *hcr_base = host_priv->hcr_base;
+	u32 temp;
+
+	/*
+	 * NOTE : We cannot bring the controller online before setting
+	 * the CHBA, hence main controller initialization is done as
+	 * part of the port_start() callback
+	 */
+
+	/* ack. any pending IRQs for this controller/port */
+	temp = ioread32(hcr_base + HSTATUS);
+	if (temp & 0x3F)
+		iowrite32((temp & 0x3F), hcr_base + HSTATUS);
+
+	/* Keep interrupts disabled on the controller */
+	temp = ioread32(hcr_base + HCONTROL);
+	iowrite32((temp & ~0x3F), hcr_base + HCONTROL);
+
+	/* Disable interrupt coalescing control(icc), for the moment */
+	DPRINTK("icc = 0x%x\n", ioread32(hcr_base + ICC));
+	iowrite32(0x01000000, hcr_base + ICC);
+
+	/* clear error registers, SError is cleared by libATA  */
+	iowrite32(0x00000FFFF, hcr_base + CE);
+	iowrite32(0x00000FFFF, hcr_base + DE);
+
+	/* initially assuming no Port multiplier, set CQPMP to 0 */
+	iowrite32(0x0, hcr_base + CQPMP);
+
+	/*
+	 * host controller will be brought on-line, during xx_port_start()
+	 * callback, that should also initiate the OOB, COMINIT sequence
+	 */
+
+	DPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
+	DPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
+
+	return 0;
+}
+
+/*
+ * scsi mid-layer and libata interface structures
+ */
+static struct scsi_host_template sata_fsl_sht = {
+	.module = THIS_MODULE,
+	.name = "sata_fsl",
+	.ioctl = ata_scsi_ioctl,
+	.queuecommand = ata_scsi_queuecmd,
+	.change_queue_depth = ata_scsi_change_queue_depth,
+	.can_queue = SATA_FSL_QUEUE_DEPTH,
+	.this_id = ATA_SHT_THIS_ID,
+	.sg_tablesize = SATA_FSL_MAX_PRD_USABLE,
+	.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+	.emulated = ATA_SHT_EMULATED,
+	.use_clustering = ATA_SHT_USE_CLUSTERING,
+	.proc_name = "sata_fsl",
+	.dma_boundary = ATA_DMA_BOUNDARY,
+	.slave_configure = ata_scsi_slave_config,
+	.slave_destroy = ata_scsi_slave_destroy,
+	.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
+	.suspend = ata_scsi_device_suspend,
+	.resume = ata_scsi_device_resume,
+#endif
+};
+
+static const struct ata_port_operations sata_fsl_ops = {
+	.port_disable = ata_port_disable,
+
+	.check_status = sata_fsl_check_status,
+	.check_altstatus = sata_fsl_check_status,
+	.dev_select = ata_noop_dev_select,
+
+	.tf_read = sata_fsl_tf_read,
+
+	.qc_prep = sata_fsl_qc_prep,
+	.qc_issue = sata_fsl_qc_issue,
+	.irq_clear = sata_fsl_irq_clear,
+	.irq_on = ata_dummy_irq_on,
+	.irq_ack = ata_dummy_irq_ack,
+
+	.scr_read = sata_fsl_scr_read,
+	.scr_write = sata_fsl_scr_write,
+
+	.freeze = sata_fsl_freeze,
+	.thaw = sata_fsl_thaw,
+	.error_handler = sata_fsl_error_handler,
+	.post_internal_cmd = sata_fsl_post_internal_cmd,
+
+	.port_start = sata_fsl_port_start,
+	.port_stop = sata_fsl_port_stop,
+};
+
+static const struct ata_port_info sata_fsl_port_info[] = {
+	{
+	 .flags = SATA_FSL_HOST_FLAGS,
+	 .pio_mask = 0x1f,	/* pio 0-4 */
+	 .udma_mask = 0x7f,	/* udma 0-6 */
+	 .port_ops = &sata_fsl_ops,
+	 },
+};
+
+static int sata_fsl_probe(struct of_device *ofdev,
+			const struct of_device_id *match)
+{
+	int retval = 0;
+	void __iomem *hcr_base = NULL;
+	void __iomem *ssr_base = NULL;
+	void __iomem *csr_base = NULL;
+	struct sata_fsl_host_priv *host_priv = NULL;
+	struct resource *r;
+	int irq;
+	struct ata_host *host;
+
+	struct ata_port_info pi = sata_fsl_port_info[0];
+	const struct ata_port_info *ppi[] = { &pi, NULL };
+
+	dev_printk(KERN_INFO, &ofdev->dev,
+		   "Sata FSL Platform/CSB Driver init\n");
+
+	r = kmalloc(sizeof(struct resource), GFP_KERNEL);
+
+	hcr_base = of_iomap(ofdev->node, 0);
+	if (!hcr_base)
+		goto error_exit_with_cleanup;
+
+	ssr_base = hcr_base + 0x100;
+	csr_base = hcr_base + 0x140;
+
+	DPRINTK("@reset i/o = 0x%x\n", ioread32(csr_base + TRANSCFG));
+	DPRINTK("sizeof(cmd_desc) = %d\n", sizeof(struct command_desc));
+	DPRINTK("sizeof(#define cmd_desc) = %d\n", SATA_FSL_CMD_DESC_SIZE);
+
+	host_priv = kzalloc(sizeof(struct sata_fsl_host_priv), GFP_KERNEL);
+	if (!host_priv)
+		goto error_exit_with_cleanup;
+
+	host_priv->hcr_base = hcr_base;
+	host_priv->ssr_base = ssr_base;
+	host_priv->csr_base = csr_base;
+
+	irq = irq_of_parse_and_map(ofdev->node, 0);
+	if (irq < 0) {
+		dev_printk(KERN_ERR, &ofdev->dev, "invalid irq from platform\n");
+		goto error_exit_with_cleanup;
+	}
+
+	/* allocate host structure */
+	host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_FSL_MAX_PORTS);
+
+	/* host->iomap is not used currently */
+	host->private_data = host_priv;
+
+	/* setup port(s) */
+
+	host->ports[0]->ioaddr.cmd_addr = host_priv->hcr_base;
+	host->ports[0]->ioaddr.scr_addr = host_priv->ssr_base;
+
+	/* initialize host controller */
+	sata_fsl_init_controller(host);
+
+	/*
+	 * Now, register with libATA core, this will also initiate the
+	 * device discovery process, invoking our port_start() handler &
+	 * error_handler() to execute a dummy Softreset EH session
+	 */
+	ata_host_activate(host, irq, sata_fsl_interrupt, SATA_FSL_IRQ_FLAG,
+			  &sata_fsl_sht);
+
+	dev_set_drvdata(&ofdev->dev, host);
+
+	return 0;
+
+error_exit_with_cleanup:
+
+	if (hcr_base)
+		iounmap(hcr_base);
+	if (host_priv)
+		kfree(host_priv);
+
+	return retval;
+}
+
+static int sata_fsl_remove(struct of_device *ofdev)
+{
+	struct ata_host *host = dev_get_drvdata(&ofdev->dev);
+	struct sata_fsl_host_priv *host_priv = host->private_data;
+
+	ata_host_detach(host);
+
+	dev_set_drvdata(&ofdev->dev, NULL);
+
+	irq_dispose_mapping(host->irq);
+	iounmap(host_priv->hcr_base);
+	kfree(host_priv);
+
+	return 0;
+}
+
+static struct of_device_id fsl_sata_match[] = {
+	{
+		.compatible = "fsl,mpc8315-sata",
+	},
+	{
+		.compatible = "fsl,mpc8379-sata",
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, fsl_sata_match);
+
+static struct of_platform_driver fsl_sata_driver = {
+	.name		= "fsl-sata",
+	.match_table	= fsl_sata_match,
+	.probe		= sata_fsl_probe,
+	.remove		= sata_fsl_remove,
+};
+
+static int __init sata_fsl_init(void)
+{
+	of_register_platform_driver(&fsl_sata_driver);
+	return 0;
+}
+
+static void __exit sata_fsl_exit(void)
+{
+	of_unregister_platform_driver(&fsl_sata_driver);
+}
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ashish Kalra, Freescale Semiconductor");
+MODULE_DESCRIPTION("Freescale 3.0Gbps SATA controller low level driver");
+MODULE_VERSION("1.10");
+
+module_init(sata_fsl_init);
+module_exit(sata_fsl_exit);
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 4df8311968e9..7f1b13e89cf7 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -421,7 +421,6 @@ static void mv_error_handler(struct ata_port *ap);
 static void mv_post_int_cmd(struct ata_queued_cmd *qc);
 static void mv_eh_freeze(struct ata_port *ap);
 static void mv_eh_thaw(struct ata_port *ap);
-static int mv_slave_config(struct scsi_device *sdev);
 static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
 
 static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
@@ -459,7 +458,7 @@ static struct scsi_host_template mv5_sht = {
 	.use_clustering		= 1,
 	.proc_name		= DRV_NAME,
 	.dma_boundary		= MV_DMA_BOUNDARY,
-	.slave_configure	= mv_slave_config,
+	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
 };
@@ -477,7 +476,7 @@ static struct scsi_host_template mv6_sht = {
 	.use_clustering		= 1,
 	.proc_name		= DRV_NAME,
 	.dma_boundary		= MV_DMA_BOUNDARY,
-	.slave_configure	= mv_slave_config,
+	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
 };
@@ -756,17 +755,6 @@ static void mv_irq_clear(struct ata_port *ap)
 {
 }
 
-static int mv_slave_config(struct scsi_device *sdev)
-{
-	int rc = ata_scsi_slave_config(sdev);
-	if (rc)
-		return rc;
-
-	blk_queue_max_phys_segments(sdev->request_queue, MV_MAX_SG_CT / 2);
-
-	return 0;	/* scsi layer doesn't check return value, sigh */
-}
-
 static void mv_set_edma_ptrs(void __iomem *port_mmio,
 			     struct mv_host_priv *hpriv,
 			     struct mv_port_priv *pp)
@@ -1138,7 +1126,7 @@ static void mv_fill_sg(struct ata_queued_cmd *qc)
 {
 	struct mv_port_priv *pp = qc->ap->private_data;
 	struct scatterlist *sg;
-	struct mv_sg *mv_sg;
+	struct mv_sg *mv_sg, *last_sg = NULL;
 
 	mv_sg = pp->sg_tbl;
 	ata_for_each_sg(sg, qc) {
@@ -1159,13 +1147,13 @@ static void mv_fill_sg(struct ata_queued_cmd *qc)
 			sg_len -= len;
 			addr += len;
 
-			if (!sg_len && ata_sg_is_last(sg, qc))
-				mv_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
-
+			last_sg = mv_sg;
 			mv_sg++;
 		}
-
 	}
+
+	if (likely(last_sg))
+		last_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
 }
 
 static inline void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last)
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index b0619278454a..26ebffc10f3e 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -796,16 +796,19 @@ static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
 				 struct sil24_sge *sge)
 {
 	struct scatterlist *sg;
+	struct sil24_sge *last_sge = NULL;
 
 	ata_for_each_sg(sg, qc) {
 		sge->addr = cpu_to_le64(sg_dma_address(sg));
 		sge->cnt = cpu_to_le32(sg_dma_len(sg));
-		if (ata_sg_is_last(sg, qc))
-			sge->flags = cpu_to_le32(SGE_TRM);
-		else
-			sge->flags = 0;
+		sge->flags = 0;
+
+		last_sge = sge;
 		sge++;
 	}
+
+	if (likely(last_sge))
+		last_sge->flags = cpu_to_le32(SGE_TRM);
 }
 
 static int sil24_qc_defer(struct ata_queued_cmd *qc)
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index b41dfb539021..c316a0bcae6c 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -5134,6 +5134,7 @@ static void ipr_build_ata_ioadl(struct ipr_cmnd *ipr_cmd,
 	u32 ioadl_flags = 0;
 	struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
 	struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
+	struct ipr_ioadl_desc *last_ioadl = NULL;
 	int len = qc->nbytes + qc->pad_len;
 	struct scatterlist *sg;
 
@@ -5156,11 +5157,13 @@ static void ipr_build_ata_ioadl(struct ipr_cmnd *ipr_cmd,
 	ata_for_each_sg(sg, qc) {
 		ioadl->flags_and_data_len = cpu_to_be32(ioadl_flags | sg_dma_len(sg));
 		ioadl->address = cpu_to_be32(sg_dma_address(sg));
-		if (ata_sg_is_last(sg, qc))
-			ioadl->flags_and_data_len |= cpu_to_be32(IPR_IOADL_FLAGS_LAST);
-		else
-			ioadl++;
+
+		last_ioadl = ioadl;
+		ioadl++;
 	}
+
+	if (likely(last_ioadl))
+		last_ioadl->flags_and_data_len |= cpu_to_be32(IPR_IOADL_FLAGS_LAST);
 }
 
 /**
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 377e6d4d9be3..bc3b6fc7b98d 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1037,18 +1037,6 @@ extern void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset,
 /*
  * qc helpers
  */
-static inline int
-ata_sg_is_last(struct scatterlist *sg, struct ata_queued_cmd *qc)
-{
-	if (sg == &qc->pad_sgent)
-		return 1;
-	if (qc->pad_len)
-		return 0;
-	if (qc->n_iter == qc->n_elem)
-		return 1;
-	return 0;
-}
-
 static inline struct scatterlist *
 ata_qc_first_sg(struct ata_queued_cmd *qc)
 {