Merge tag 'drivers-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

Pull ARM SoC driver changes from Olof Johansson:
 "SoC-near driver changes that we're merging through our tree.  Mostly
  because they depend on other changes we have staged, but in some cases
  because the driver maintainers preferred that we did it this way.

  This contains a largeish cleanup series of the omap_l3_noc bus driver,
  cpuidle rework for Exynos, some reset driver conversions and a long
  branch of TI EDMA fixes and cleanups, with more to come next release.

  The TI EDMA cleanups is a shared branch with the dmaengine tree, with
  a handful of Davinci-specific fixes on top.

  After discussion at last year's KS (and some more on the mailing
  lists), we are here adding a drivers/soc directory.  The purpose of
  this is to keep per-vendor shared code that's needed by different
  drivers but that doesn't fit into the MFD (nor drivers/platform)
  model.  We expect to keep merging contents for this hierarchy through
  arm-soc so we can keep an eye on what the vendors keep adding here and
  not making it a free-for-all to shove in crazy stuff"

* tag 'drivers-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits)
  cpufreq: exynos: Fix driver compilation with ARCH_MULTIPLATFORM
  tty: serial: msm: Remove direct access to GSBI
  power: reset: keystone-reset: introduce keystone reset driver
  Documentation: dt: add bindings for keystone pll control controller
  Documentation: dt: add bindings for keystone reset driver
  soc: qcom: fix of_device_id table
  ARM: EXYNOS: Fix kernel panic when unplugging CPU1 on exynos
  ARM: EXYNOS: Move the driver to drivers/cpuidle directory
  ARM: EXYNOS: Cleanup all unneeded headers from cpuidle.c
  ARM: EXYNOS: Pass the AFTR callback to the platform_data
  ARM: EXYNOS: Move S5P_CHECK_SLEEP into pm.c
  ARM: EXYNOS: Move the power sequence call in the cpu_pm notifier
  ARM: EXYNOS: Move the AFTR state function into pm.c
  ARM: EXYNOS: Encapsulate the AFTR code into a function
  ARM: EXYNOS: Disable cpuidle for exynos5440
  ARM: EXYNOS: Encapsulate boot vector code into a function for cpuidle
  ARM: EXYNOS: Pass wakeup mask parameter to function for cpuidle
  ARM: EXYNOS: Remove ifdef for scu_enable in pm
  ARM: EXYNOS: Move scu_enable in the cpu_pm notifier
  ARM: EXYNOS: Use the cpu_pm notifier for pm
  ...

58 files changed, 2605 insertions, 1062 deletions

diff --git a/Documentation/ABI/testing/sysfs-platform-brcmstb-gisb-arb b/Documentation/ABI/testing/sysfs-platform-brcmstb-gisb-arb
new file mode 100644
index 000000000000..f1bad92bbe27
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-brcmstb-gisb-arb
@@ -0,0 +1,8 @@
+What:		/sys/devices/../../gisb_arb_timeout
+Date:		May 2014
+KernelVersion:	3.17
+Contact:	Florian Fainelli <f.fainelli@gmail.com>
+Description:
+		Returns the currently configured raw timeout value of the
+		Broadcom Set Top Box internal GISB bus arbiter. Minimum value
+		is 1, and maximum value is 0xffffffff.
diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
index c0105de55cbd..974624ea68f6 100644
--- a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
+++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
@@ -6,6 +6,8 @@ provided by Arteris.
 Required properties:
 - compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
                Should be "ti,omap4-l3-noc" for OMAP4 family
+	       Should be "ti,dra7-l3-noc" for DRA7 family
+               Should be "ti,am4372-l3-noc" for AM43 family
 - reg:	Contains L3 register address range for each noc domain.
 - ti,hwmods: "l3_main_1", ... One hwmod for each noc domain.
 
diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
new file mode 100644
index 000000000000..e2d501d20c9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
@@ -0,0 +1,30 @@
+Broadcom GISB bus Arbiter controller
+
+Required properties:
+
+- compatible: should be "brcm,gisb-arb"
+- reg: specifies the base physical address and size of the registers
+- interrupt-parent: specifies the phandle to the parent interrupt controller
+  this arbiter gets interrupt line from
+- interrupts: specifies the two interrupts (timeout and TEA) to be used from
+  the parent interrupt controller
+
+Optional properties:
+
+- brcm,gisb-arb-master-mask: 32-bits wide bitmask used to specify which GISB
+  masters are valid at the system level
+- brcm,gisb-arb-master-names: string list of the litteral name of the GISB
+  masters. Should match the number of bits set in brcm,gisb-master-mask and
+  the order in which they appear
+
+Example:
+
+gisb-arb@f0400000 {
+	compatible = "brcm,gisb-arb";
+	reg = <0xf0400000 0x800>;
+	interrupts = <0>, <2>;
+	interrupt-parent = <&sun_l2_intc>;
+
+	brcm,gisb-arb-master-mask = <0x7>;
+	brcm,gisb-arb-master-names = "bsp_0", "scpu_0", "cpu_0";
+};
diff --git a/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt b/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt
new file mode 100644
index 000000000000..3e6a81e99804
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt
@@ -0,0 +1,20 @@
+* Device tree bindings for Texas Instruments keystone pll controller
+
+The main pll controller used to drive theC66x CorePacs, the switch fabric,
+and a majority of the peripheral clocks (all but the ARM CorePacs, DDR3 and
+the NETCP modules) requires a PLL Controller to manage the various clock
+divisions, gating, and synchronization.
+
+Required properties:
+
+- compatible:		"ti,keystone-pllctrl", "syscon"
+
+- reg:			contains offset/length value for pll controller
+			registers space.
+
+Example:
+
+pllctrl: pll-controller@0x02310000 {
+	compatible = "ti,keystone-pllctrl", "syscon";
+	reg = <0x02310000 0x200>;
+};
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
index 68ff2137bae7..5ba525a10035 100644
--- a/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -2,11 +2,8 @@ TI EDMA
 
 Required properties:
 - compatible : "ti,edma3"
-- ti,edma-regions: Number of regions
-- ti,edma-slots: Number of slots
 - #dma-cells: Should be set to <1>
               Clients should use a single channel number per DMA request.
-- dma-channels: Specify total DMA channels per CC
 - reg: Memory map for accessing module
 - interrupt-parent: Interrupt controller the interrupt is routed through
 - interrupts: Exactly 3 interrupts need to be specified in the order:
@@ -17,6 +14,13 @@ Optional properties:
 - ti,hwmods: Name of the hwmods associated to the EDMA
 - ti,edma-xbar-event-map: Crossbar event to channel map
 
+Deprecated properties:
+Listed here in case one wants to boot an old kernel with new DTB. These
+properties might need to be added to the new DTS files.
+- ti,edma-regions: Number of regions
+- ti,edma-slots: Number of slots
+- dma-channels: Specify total DMA channels per CC
+
 Example:
 
 edma: edma@49000000 {
@@ -26,9 +30,6 @@ edma: edma@49000000 {
 	compatible = "ti,edma3";
 	ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
 	#dma-cells = <1>;
-	dma-channels = <64>;
-	ti,edma-regions = <4>;
-	ti,edma-slots = <256>;
 	ti,edma-xbar-event-map = /bits/ 16 <1 12
 					    2 13>;
 };
diff --git a/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt b/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt
index 653c90c34a71..1ee3bc09f319 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt
@@ -6,10 +6,11 @@ The actual devices are instantiated from the child nodes of a Device Bus node.
 
 Required properties:
 
- - compatible:          Currently only Armada 370/XP SoC are supported,
-                        with this compatible string:
+ - compatible:          Armada 370/XP SoC are supported using the
+                        "marvell,mvebu-devbus" compatible string.
 
-                        marvell,mvebu-devbus
+                        Orion5x SoC are supported using the
+                        "marvell,orion-devbus" compatible string.
 
  - reg:                 A resource specifier for the register space.
                         This is the base address of a chip select within
@@ -22,7 +23,14 @@ Required properties:
                         integer values for each chip-select line in use:
                         0 <physical address of mapping> <size>
 
-Mandatory timing properties for child nodes:
+Optional properties:
+
+ - devbus,keep-config   This property can optionally be used to keep
+                        using the timing parameters set by the
+                        bootloader. It makes all the timing properties
+                        described below unused.
+
+Timing properties for child nodes:
 
 Read parameters:
 
@@ -30,21 +38,26 @@ Read parameters:
                         drive the AD bus after the completion of a device read.
                         This prevents contentions on the Device Bus after a read
                         cycle from a slow device.
+                        Mandatory, except if devbus,keep-config is used.
 
- - devbus,bus-width:    Defines the bus width (e.g. <16>)
+ - devbus,bus-width:    Defines the bus width, in bits (e.g. <16>).
+                        Mandatory, except if devbus,keep-config is used.
 
  - devbus,badr-skew-ps: Defines the time delay from from A[2:0] toggle,
                         to read data sample. This parameter is useful for
                         synchronous pipelined devices, where the address
                         precedes the read data by one or two cycles.
+                        Mandatory, except if devbus,keep-config is used.
 
  - devbus,acc-first-ps: Defines the time delay from the negation of
                         ALE[0] to the cycle that the first read data is sampled
                         by the controller.
+                        Mandatory, except if devbus,keep-config is used.
 
  - devbus,acc-next-ps:  Defines the time delay between the cycle that
                         samples data N and the cycle that samples data N+1
                         (in burst accesses).
+                        Mandatory, except if devbus,keep-config is used.
 
  - devbus,rd-setup-ps:  Defines the time delay between DEV_CSn assertion to
 			DEV_OEn assertion. If set to 0 (default),
@@ -52,6 +65,8 @@ Read parameters:
                         This parameter has no affect on <acc-first-ps> parameter
                         (no affect on first data sample). Set <rd-setup-ps>
                         to a value smaller than <acc-first-ps>.
+                        Mandatory for "marvell,mvebu-devbus" compatible string,
+                        except if devbus,keep-config is used.
 
  - devbus,rd-hold-ps:   Defines the time between the last data sample to the
 			de-assertion of DEV_CSn. If set to 0 (default),
@@ -62,16 +77,20 @@ Read parameters:
                         last data sampled. Also this parameter has no
                         affect on <turn-off-ps> parameter.
                         Set <rd-hold-ps> to a value smaller than <turn-off-ps>.
+                        Mandatory for "marvell,mvebu-devbus" compatible string,
+                        except if devbus,keep-config is used.
 
 Write parameters:
 
  - devbus,ale-wr-ps:    Defines the time delay from the ALE[0] negation cycle
 			to the DEV_WEn assertion.
+                        Mandatory.
 
  - devbus,wr-low-ps:    Defines the time during which DEV_WEn is active.
                         A[2:0] and Data are kept valid as long as DEV_WEn
                         is active. This parameter defines the setup time of
                         address and data to DEV_WEn rise.
+                        Mandatory.
 
  - devbus,wr-high-ps:   Defines the time during which DEV_WEn is kept
                         inactive (high) between data beats of a burst write.
@@ -79,10 +98,13 @@ Write parameters:
                         <wr-high-ps> - <tick> ps.
 			This parameter defines the hold time of address and
 			data after DEV_WEn rise.
+                        Mandatory.
 
  - devbus,sync-enable: Synchronous device enable.
                        1: True
                        0: False
+                       Mandatory for "marvell,mvebu-devbus" compatible string,
+                       except if devbus,keep-config is used.
 
 An example for an Armada XP GP board, with a 16 MiB NOR device as child
 is showed below. Note that the Device Bus driver is in charge of allocating
diff --git a/Documentation/devicetree/bindings/power/reset/keystone-reset.txt b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt
new file mode 100644
index 000000000000..c82f12e2d85c
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt
@@ -0,0 +1,67 @@
+* Device tree bindings for Texas Instruments keystone reset
+
+This node is intended to allow SoC reset in case of software reset
+of selected watchdogs.
+
+The Keystone SoCs can contain up to 4 watchdog timers to reset
+SoC. Each watchdog timer event input is connected to the Reset Mux
+block. The Reset Mux block can be configured to cause reset or not.
+
+Additionally soft or hard reset can be configured.
+
+Required properties:
+
+- compatible:		ti,keystone-reset
+
+- ti,syscon-pll:	phandle/offset pair. The phandle to syscon used to
+			access pll controller registers and the offset to use
+			reset control registers.
+
+- ti,syscon-dev:	phandle/offset pair. The phandle to syscon used to
+			access device state control registers and the offset
+			in order to use mux block registers for all watchdogs.
+
+Optional properties:
+
+- ti,soft-reset:	Boolean option indicating soft reset.
+			By default hard reset is used.
+
+- ti,wdt-list:		WDT list that can cause SoC reset. It's not related
+			to WDT driver, it's just needed to enable a SoC related
+			reset that's triggered by one of WDTs. The list is
+			in format: <0>, <2>; It can be in random order and
+			begins from 0 to 3, as keystone can contain up to 4 SoC
+			reset watchdogs and can be in random order.
+
+Example 1:
+Setup keystone reset so that in case software reset or
+WDT0 is triggered it issues hard reset for SoC.
+
+pllctrl: pll-controller@02310000 {
+	compatible = "ti,keystone-pllctrl", "syscon";
+	reg = <0x02310000 0x200>;
+};
+
+devctrl: device-state-control@02620000 {
+	compatible = "ti,keystone-devctrl", "syscon";
+	reg = <0x02620000 0x1000>;
+};
+
+rstctrl: reset-controller {
+	compatible = "ti,keystone-reset";
+	ti,syscon-pll = <&pllctrl 0xe4>;
+	ti,syscon-dev = <&devctrl 0x328>;
+	ti,wdt-list = <0>;
+};
+
+Example 2:
+Setup keystone reset so that in case of software reset or
+WDT0 or WDT2 is triggered it issues soft reset for SoC.
+
+rstctrl: reset-controller {
+	compatible = "ti,keystone-reset";
+	ti,syscon-pll = <&pllctrl 0xe4>;
+	ti,syscon-dev = <&devctrl 0x328>;
+	ti,wdt-list = <0>, <2>;
+	ti,soft-reset;
+};
diff --git a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt
new file mode 100644
index 000000000000..c8f775714887
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt
@@ -0,0 +1,21 @@
+Allwinner sunxi Peripheral Reset Controller
+===========================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be one of the following:
+  "allwinner,sun6i-a31-ahb1-reset"
+  "allwinner,sun6i-a31-clock-reset"
+- reg: should be register base and length as documented in the
+  datasheet
+- #reset-cells: 1, see below
+
+example:
+
+ahb1_rst: reset@01c202c0 {
+	#reset-cells = <1>;
+	compatible = "allwinner,sun6i-a31-ahb1-reset";
+	reg = <0x01c202c0 0xc>;
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 586397cf6e9c..9f53e824b037 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -147,9 +147,6 @@
 				<0x44e10f90 0x40>;
 			interrupts = <12 13 14>;
 			#dma-cells = <1>;
-			dma-channels = <64>;
-			ti,edma-regions = <4>;
-			ti,edma-slots = <256>;
 		};
 
 		gpio0: gpio@44e07000 {
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 1704e853f163..794c73e5c4e4 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -112,9 +112,6 @@
 					<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
-			dma-channels = <64>;
-			ti,edma-regions = <4>;
-			ti,edma-slots = <256>;
 		};
 
 		uart0: serial@44e09000 {
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index 5339009b3c0c..485be42519b9 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -102,7 +102,13 @@
 #define PARM_OFFSET(param_no)	(EDMA_PARM + ((param_no) << 5))
 
 #define EDMA_DCHMAP	0x0100  /* 64 registers */
-#define CHMAP_EXIST	BIT(24)
+
+/* CCCFG register */
+#define GET_NUM_DMACH(x)	(x & 0x7) /* bits 0-2 */
+#define GET_NUM_PAENTRY(x)	((x & 0x7000) >> 12) /* bits 12-14 */
+#define GET_NUM_EVQUE(x)	((x & 0x70000) >> 16) /* bits 16-18 */
+#define GET_NUM_REGN(x)		((x & 0x300000) >> 20) /* bits 20-21 */
+#define CHMAP_EXIST		BIT(24)
 
 #define EDMA_MAX_DMACH           64
 #define EDMA_MAX_PARAMENTRY     512
@@ -233,7 +239,6 @@ struct edma {
 	unsigned	num_region;
 	unsigned	num_slots;
 	unsigned	num_tc;
-	unsigned	num_cc;
 	enum dma_event_q 	default_queue;
 
 	/* list of channels with no even trigger; terminated by "-1" */
@@ -290,12 +295,6 @@ static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
 			~(0x7 << bit), queue_no << bit);
 }
 
-static void __init map_queue_tc(unsigned ctlr, int queue_no, int tc_no)
-{
-	int bit = queue_no * 4;
-	edma_modify(ctlr, EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit));
-}
-
 static void __init assign_priority_to_queue(unsigned ctlr, int queue_no,
 		int priority)
 {
@@ -994,29 +993,23 @@ void edma_set_dest(unsigned slot, dma_addr_t dest_port,
 EXPORT_SYMBOL(edma_set_dest);
 
 /**
- * edma_get_position - returns the current transfer points
+ * edma_get_position - returns the current transfer point
  * @slot: parameter RAM slot being examined
- * @src: pointer to source port position
- * @dst: pointer to destination port position
+ * @dst:  true selects the dest position, false the source
  *
- * Returns current source and destination addresses for a particular
- * parameter RAM slot.  Its channel should not be active when this is called.
+ * Returns the position of the current active slot
  */
-void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst)
+dma_addr_t edma_get_position(unsigned slot, bool dst)
 {
-	struct edmacc_param temp;
-	unsigned ctlr;
+	u32 offs, ctlr = EDMA_CTLR(slot);
 
-	ctlr = EDMA_CTLR(slot);
 	slot = EDMA_CHAN_SLOT(slot);
 
-	edma_read_slot(EDMA_CTLR_CHAN(ctlr, slot), &temp);
-	if (src != NULL)
-		*src = temp.src;
-	if (dst != NULL)
-		*dst = temp.dst;
+	offs = PARM_OFFSET(slot);
+	offs += dst ? PARM_DST : PARM_SRC;
+
+	return edma_read(ctlr, offs);
 }
-EXPORT_SYMBOL(edma_get_position);
 
 /**
  * edma_set_src_index - configure DMA source address indexing
@@ -1421,6 +1414,67 @@ void edma_clear_event(unsigned channel)
 }
 EXPORT_SYMBOL(edma_clear_event);
 
+static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata,
+			      struct edma *edma_cc)
+{
+	int i;
+	u32 value, cccfg;
+	s8 (*queue_priority_map)[2];
+
+	/* Decode the eDMA3 configuration from CCCFG register */
+	cccfg = edma_read(0, EDMA_CCCFG);
+
+	value = GET_NUM_REGN(cccfg);
+	edma_cc->num_region = BIT(value);
+
+	value = GET_NUM_DMACH(cccfg);
+	edma_cc->num_channels = BIT(value + 1);
+
+	value = GET_NUM_PAENTRY(cccfg);
+	edma_cc->num_slots = BIT(value + 4);
+
+	value = GET_NUM_EVQUE(cccfg);
+	edma_cc->num_tc = value + 1;
+
+	dev_dbg(dev, "eDMA3 HW configuration (cccfg: 0x%08x):\n", cccfg);
+	dev_dbg(dev, "num_region: %u\n", edma_cc->num_region);
+	dev_dbg(dev, "num_channel: %u\n", edma_cc->num_channels);
+	dev_dbg(dev, "num_slot: %u\n", edma_cc->num_slots);
+	dev_dbg(dev, "num_tc: %u\n", edma_cc->num_tc);
+
+	/* Nothing need to be done if queue priority is provided */
+	if (pdata->queue_priority_mapping)
+		return 0;
+
+	/*
+	 * Configure TC/queue priority as follows:
+	 * Q0 - priority 0
+	 * Q1 - priority 1
+	 * Q2 - priority 2
+	 * ...
+	 * The meaning of priority numbers: 0 highest priority, 7 lowest
+	 * priority. So Q0 is the highest priority queue and the last queue has
+	 * the lowest priority.
+	 */
+	queue_priority_map = devm_kzalloc(dev,
+					  (edma_cc->num_tc + 1) * sizeof(s8),
+					  GFP_KERNEL);
+	if (!queue_priority_map)
+		return -ENOMEM;
+
+	for (i = 0; i < edma_cc->num_tc; i++) {
+		queue_priority_map[i][0] = i;
+		queue_priority_map[i][1] = i;
+	}
+	queue_priority_map[i][0] = -1;
+	queue_priority_map[i][1] = -1;
+
+	pdata->queue_priority_mapping = queue_priority_map;
+	pdata->default_queue = 0;
+
+	return 0;
+}
+
 #if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES)
 
 static int edma_xbar_event_map(struct device *dev, struct device_node *node,
@@ -1471,65 +1525,16 @@ static int edma_of_parse_dt(struct device *dev,
 			    struct device_node *node,
 			    struct edma_soc_info *pdata)
 {
-	int ret = 0, i;
-	u32 value;
+	int ret = 0;
 	struct property *prop;
 	size_t sz;
 	struct edma_rsv_info *rsv_info;
-	s8 (*queue_tc_map)[2], (*queue_priority_map)[2];
-
-	memset(pdata, 0, sizeof(struct edma_soc_info));
-
-	ret = of_property_read_u32(node, "dma-channels", &value);
-	if (ret < 0)
-		return ret;
-	pdata->n_channel = value;
-
-	ret = of_property_read_u32(node, "ti,edma-regions", &value);
-	if (ret < 0)
-		return ret;
-	pdata->n_region = value;
-
-	ret = of_property_read_u32(node, "ti,edma-slots", &value);
-	if (ret < 0)
-		return ret;
-	pdata->n_slot = value;
-
-	pdata->n_cc = 1;
 
 	rsv_info = devm_kzalloc(dev, sizeof(struct edma_rsv_info), GFP_KERNEL);
 	if (!rsv_info)
 		return -ENOMEM;
 	pdata->rsv = rsv_info;
 
-	queue_tc_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL);
-	if (!queue_tc_map)
-		return -ENOMEM;
-
-	for (i = 0; i < 3; i++) {
-		queue_tc_map[i][0] = i;
-		queue_tc_map[i][1] = i;
-	}
-	queue_tc_map[i][0] = -1;
-	queue_tc_map[i][1] = -1;
-
-	pdata->queue_tc_mapping = queue_tc_map;
-
-	queue_priority_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL);
-	if (!queue_priority_map)
-		return -ENOMEM;
-
-	for (i = 0; i < 3; i++) {
-		queue_priority_map[i][0] = i;
-		queue_priority_map[i][1] = i;
-	}
-	queue_priority_map[i][0] = -1;
-	queue_priority_map[i][1] = -1;
-
-	pdata->queue_priority_mapping = queue_priority_map;
-
-	pdata->default_queue = 0;
-
 	prop = of_find_property(node, "ti,edma-xbar-event-map", &sz);
 	if (prop)
 		ret = edma_xbar_event_map(dev, node, pdata, sz);
@@ -1556,6 +1561,7 @@ static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev,
 		return ERR_PTR(ret);
 
 	dma_cap_set(DMA_SLAVE, edma_filter_info.dma_cap);
+	dma_cap_set(DMA_CYCLIC, edma_filter_info.dma_cap);
 	of_dma_controller_register(dev->of_node, of_dma_simple_xlate,
 				   &edma_filter_info);
 
@@ -1574,7 +1580,6 @@ static int edma_probe(struct platform_device *pdev)
 	struct edma_soc_info	**info = pdev->dev.platform_data;
 	struct edma_soc_info    *ninfo[EDMA_MAX_CC] = {NULL};
 	s8		(*queue_priority_mapping)[2];
-	s8		(*queue_tc_mapping)[2];
 	int			i, j, off, ln, found = 0;
 	int			status = -1;
 	const s16		(*rsv_chans)[2];
@@ -1585,7 +1590,6 @@ static int edma_probe(struct platform_device *pdev)
 	struct resource		*r[EDMA_MAX_CC] = {NULL};
 	struct resource		res[EDMA_MAX_CC];
 	char			res_name[10];
-	char			irq_name[10];
 	struct device_node	*node = pdev->dev.of_node;
 	struct device		*dev = &pdev->dev;
 	int			ret;
@@ -1650,12 +1654,10 @@ static int edma_probe(struct platform_device *pdev)
 		if (!edma_cc[j])
 			return -ENOMEM;
 
-		edma_cc[j]->num_channels = min_t(unsigned, info[j]->n_channel,
-							EDMA_MAX_DMACH);
-		edma_cc[j]->num_slots = min_t(unsigned, info[j]->n_slot,
-							EDMA_MAX_PARAMENTRY);
-		edma_cc[j]->num_cc = min_t(unsigned, info[j]->n_cc,
-							EDMA_MAX_CC);
+		/* Get eDMA3 configuration from IP */
+		ret = edma_setup_from_hw(dev, info[j], edma_cc[j]);
+		if (ret)
+			return ret;
 
 		edma_cc[j]->default_queue = info[j]->default_queue;
 
@@ -1707,14 +1709,21 @@ static int edma_probe(struct platform_device *pdev)
 
 		if (node) {
 			irq[j] = irq_of_parse_and_map(node, 0);
+			err_irq[j] = irq_of_parse_and_map(node, 2);
 		} else {
+			char irq_name[10];
+
 			sprintf(irq_name, "edma%d", j);
 			irq[j] = platform_get_irq_byname(pdev, irq_name);
+
+			sprintf(irq_name, "edma%d_err", j);
+			err_irq[j] = platform_get_irq_byname(pdev, irq_name);
 		}
 		edma_cc[j]->irq_res_start = irq[j];
-		status = devm_request_irq(&pdev->dev, irq[j],
-					  dma_irq_handler, 0, "edma",
-					  &pdev->dev);
+		edma_cc[j]->irq_res_end = err_irq[j];
+
+		status = devm_request_irq(dev, irq[j], dma_irq_handler, 0,
+					  "edma", dev);
 		if (status < 0) {
 			dev_dbg(&pdev->dev,
 				"devm_request_irq %d failed --> %d\n",
@@ -1722,16 +1731,8 @@ static int edma_probe(struct platform_device *pdev)
 			return status;
 		}
 
-		if (node) {
-			err_irq[j] = irq_of_parse_and_map(node, 2);
-		} else {
-			sprintf(irq_name, "edma%d_err", j);
-			err_irq[j] = platform_get_irq_byname(pdev, irq_name);
-		}
-		edma_cc[j]->irq_res_end = err_irq[j];
-		status = devm_request_irq(&pdev->dev, err_irq[j],
-					  dma_ccerr_handler, 0,
-					  "edma_error", &pdev->dev);
+		status = devm_request_irq(dev, err_irq[j], dma_ccerr_handler, 0,
+					  "edma_error", dev);
 		if (status < 0) {
 			dev_dbg(&pdev->dev,
 				"devm_request_irq %d failed --> %d\n",
@@ -1742,14 +1743,8 @@ static int edma_probe(struct platform_device *pdev)
 		for (i = 0; i < edma_cc[j]->num_channels; i++)
 			map_dmach_queue(j, i, info[j]->default_queue);
 
-		queue_tc_mapping = info[j]->queue_tc_mapping;
 		queue_priority_mapping = info[j]->queue_priority_mapping;
 
-		/* Event queue to TC mapping */
-		for (i = 0; queue_tc_mapping[i][0] != -1; i++)
-			map_queue_tc(j, queue_tc_mapping[i][0],
-					queue_tc_mapping[i][1]);
-
 		/* Event queue priority mapping */
 		for (i = 0; queue_priority_mapping[i][0] != -1; i++)
 			assign_priority_to_queue(j,
@@ -1762,7 +1757,7 @@ static int edma_probe(struct platform_device *pdev)
 		if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
 			map_dmach_param(j);
 
-		for (i = 0; i < info[j]->n_region; i++) {
+		for (i = 0; i < edma_cc[j]->num_region; i++) {
 			edma_write_array2(j, EDMA_DRAE, i, 0, 0x0);
 			edma_write_array2(j, EDMA_DRAE, i, 1, 0x0);
 			edma_write_array(j, EDMA_QRAE, i, 0x0);
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 56ea41d5f849..b85b781b05fd 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -134,13 +134,6 @@ struct platform_device da8xx_serial_device[] = {
 	}
 };
 
-static s8 da8xx_queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{1, 1},
-	{-1, -1}
-};
-
 static s8 da8xx_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 3},
@@ -148,12 +141,6 @@ static s8 da8xx_queue_priority_mapping[][2] = {
 	{-1, -1}
 };
 
-static s8 da850_queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{-1, -1}
-};
-
 static s8 da850_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 3},
@@ -161,12 +148,6 @@ static s8 da850_queue_priority_mapping[][2] = {
 };
 
 static struct edma_soc_info da830_edma_cc0_info = {
-	.n_channel		= 32,
-	.n_region		= 4,
-	.n_slot			= 128,
-	.n_tc			= 2,
-	.n_cc			= 1,
-	.queue_tc_mapping	= da8xx_queue_tc_mapping,
 	.queue_priority_mapping	= da8xx_queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
 };
@@ -177,22 +158,10 @@ static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = {
 
 static struct edma_soc_info da850_edma_cc_info[] = {
 	{
-		.n_channel		= 32,
-		.n_region		= 4,
-		.n_slot			= 128,
-		.n_tc			= 2,
-		.n_cc			= 1,
-		.queue_tc_mapping	= da8xx_queue_tc_mapping,
 		.queue_priority_mapping	= da8xx_queue_priority_mapping,
 		.default_queue		= EVENTQ_1,
 	},
 	{
-		.n_channel		= 32,
-		.n_region		= 4,
-		.n_slot			= 128,
-		.n_tc			= 1,
-		.n_cc			= 1,
-		.queue_tc_mapping	= da850_queue_tc_mapping,
 		.queue_priority_mapping	= da850_queue_priority_mapping,
 		.default_queue		= EVENTQ_0,
 	},
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 07381d8cea62..2f3ed3a58d57 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -569,14 +569,6 @@ static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 /*----------------------------------------------------------------------*/
 
 static s8
-queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{1, 1},
-	{-1, -1},
-};
-
-static s8
 queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 3},
@@ -585,12 +577,6 @@ queue_priority_mapping[][2] = {
 };
 
 static struct edma_soc_info edma_cc0_info = {
-	.n_channel		= 64,
-	.n_region		= 4,
-	.n_slot			= 128,
-	.n_tc			= 2,
-	.n_cc			= 1,
-	.queue_tc_mapping	= queue_tc_mapping,
 	.queue_priority_mapping	= queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
 };
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 08a61b938333..0ae8114f5cc9 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -853,16 +853,6 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 
 /* Four Transfer Controllers on DM365 */
 static s8
-dm365_queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{1, 1},
-	{2, 2},
-	{3, 3},
-	{-1, -1},
-};
-
-static s8
 dm365_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 7},
@@ -873,12 +863,6 @@ dm365_queue_priority_mapping[][2] = {
 };
 
 static struct edma_soc_info edma_cc0_info = {
-	.n_channel		= 64,
-	.n_region		= 4,
-	.n_slot			= 256,
-	.n_tc			= 4,
-	.n_cc			= 1,
-	.queue_tc_mapping	= dm365_queue_tc_mapping,
 	.queue_priority_mapping	= dm365_queue_priority_mapping,
 	.default_queue		= EVENTQ_3,
 };
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 5debffba4b24..dc52657909c4 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -499,14 +499,6 @@ static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 /*----------------------------------------------------------------------*/
 
 static s8
-queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{1, 1},
-	{-1, -1},
-};
-
-static s8
 queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 3},
@@ -515,12 +507,6 @@ queue_priority_mapping[][2] = {
 };
 
 static struct edma_soc_info edma_cc0_info = {
-	.n_channel		= 64,
-	.n_region		= 4,
-	.n_slot			= 128,
-	.n_tc			= 2,
-	.n_cc			= 1,
-	.queue_tc_mapping	= queue_tc_mapping,
 	.queue_priority_mapping	= queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
 };
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 332d00d24dc2..6c3bbea7d77d 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -533,16 +533,6 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 
 /* Four Transfer Controllers on DM646x */
 static s8
-dm646x_queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{1, 1},
-	{2, 2},
-	{3, 3},
-	{-1, -1},
-};
-
-static s8
 dm646x_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 4},
@@ -553,12 +543,6 @@ dm646x_queue_priority_mapping[][2] = {
 };
 
 static struct edma_soc_info edma_cc0_info = {
-	.n_channel		= 64,
-	.n_region		= 6,	/* 0-1, 4-7 */
-	.n_slot			= 512,
-	.n_tc			= 4,
-	.n_cc			= 1,
-	.queue_tc_mapping	= dm646x_queue_tc_mapping,
 	.queue_priority_mapping	= dm646x_queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
 };
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 9f3258880949..788f26d21141 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -18,7 +18,6 @@ obj-$(CONFIG_ARCH_EXYNOS)	+= exynos.o pmu.o exynos-smc.o firmware.o
 
 obj-$(CONFIG_PM_SLEEP)		+= pm.o sleep.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
-obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 5dba5a1ee6c2..80b90e346ca0 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -115,6 +115,7 @@ void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1);
 
 struct map_desc;
 extern void __iomem *sysram_ns_base_addr;
+extern void __iomem *sysram_base_addr;
 void exynos_init_io(void);
 void exynos_restart(enum reboot_mode mode, const char *cmd);
 void exynos_cpuidle_init(void);
@@ -165,6 +166,7 @@ extern int  exynos_cpu_power_state(int cpu);
 extern void exynos_cluster_power_down(int cluster);
 extern void exynos_cluster_power_up(int cluster);
 extern int  exynos_cluster_power_state(int cluster);
+extern void exynos_enter_aftr(void);
 
 extern void s5p_init_cpu(void __iomem *cpuid_addr);
 extern unsigned int samsung_rev(void);
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
deleted file mode 100644
index 3dd385ebf195..000000000000
--- a/arch/arm/mach-exynos/cpuidle.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/* linux/arch/arm/mach-exynos4/cpuidle.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/cpuidle.h>
-#include <linux/cpu_pm.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/module.h>
-#include <linux/time.h>
-#include <linux/platform_device.h>
-
-#include <asm/proc-fns.h>
-#include <asm/smp_scu.h>
-#include <asm/suspend.h>
-#include <asm/unified.h>
-#include <asm/cpuidle.h>
-
-#include <plat/pm.h>
-
-#include <mach/map.h>
-
-#include "common.h"
-#include "regs-pmu.h"
-
-#define REG_DIRECTGO_ADDR	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
-			S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
-			(S5P_VA_SYSRAM + 0x24) : S5P_INFORM0))
-#define REG_DIRECTGO_FLAG	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
-			S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
-			(S5P_VA_SYSRAM + 0x20) : S5P_INFORM1))
-
-#define S5P_CHECK_AFTR		0xFCBA0D10
-
-#define EXYNOS5_PWR_CTRL1			(S5P_VA_CMU + 0x01020)
-#define EXYNOS5_PWR_CTRL2			(S5P_VA_CMU + 0x01024)
-
-#define PWR_CTRL1_CORE2_DOWN_RATIO		(7 << 28)
-#define PWR_CTRL1_CORE1_DOWN_RATIO		(7 << 16)
-#define PWR_CTRL1_DIV2_DOWN_EN			(1 << 9)
-#define PWR_CTRL1_DIV1_DOWN_EN			(1 << 8)
-#define PWR_CTRL1_USE_CORE1_WFE			(1 << 5)
-#define PWR_CTRL1_USE_CORE0_WFE			(1 << 4)
-#define PWR_CTRL1_USE_CORE1_WFI			(1 << 1)
-#define PWR_CTRL1_USE_CORE0_WFI			(1 << 0)
-
-#define PWR_CTRL2_DIV2_UP_EN			(1 << 25)
-#define PWR_CTRL2_DIV1_UP_EN			(1 << 24)
-#define PWR_CTRL2_DUR_STANDBY2_VAL		(1 << 16)
-#define PWR_CTRL2_DUR_STANDBY1_VAL		(1 << 8)
-#define PWR_CTRL2_CORE2_UP_RATIO		(1 << 4)
-#define PWR_CTRL2_CORE1_UP_RATIO		(1 << 0)
-
-static int exynos4_enter_lowpower(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-				int index);
-
-static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device);
-
-static struct cpuidle_driver exynos4_idle_driver = {
-	.name			= "exynos4_idle",
-	.owner			= THIS_MODULE,
-	.states = {
-		[0] = ARM_CPUIDLE_WFI_STATE,
-		[1] = {
-			.enter			= exynos4_enter_lowpower,
-			.exit_latency		= 300,
-			.target_residency	= 100000,
-			.flags			= CPUIDLE_FLAG_TIME_VALID,
-			.name			= "C1",
-			.desc			= "ARM power down",
-		},
-	},
-	.state_count = 2,
-	.safe_state_index = 0,
-};
-
-/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
-static void exynos4_set_wakeupmask(void)
-{
-	__raw_writel(0x0000ff3e, S5P_WAKEUP_MASK);
-}
-
-static unsigned int g_pwr_ctrl, g_diag_reg;
-
-static void save_cpu_arch_register(void)
-{
-	/*read power control register*/
-	asm("mrc p15, 0, %0, c15, c0, 0" : "=r"(g_pwr_ctrl) : : "cc");
-	/*read diagnostic register*/
-	asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc");
-	return;
-}
-
-static void restore_cpu_arch_register(void)
-{
-	/*write power control register*/
-	asm("mcr p15, 0, %0, c15, c0, 0" : : "r"(g_pwr_ctrl) : "cc");
-	/*write diagnostic register*/
-	asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc");
-	return;
-}
-
-static int idle_finisher(unsigned long flags)
-{
-	cpu_do_idle();
-	return 1;
-}
-
-static int exynos4_enter_core0_aftr(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-				int index)
-{
-	unsigned long tmp;
-
-	exynos4_set_wakeupmask();
-
-	/* Set value of power down register for aftr mode */
-	exynos_sys_powerdown_conf(SYS_AFTR);
-
-	__raw_writel(virt_to_phys(exynos_cpu_resume), REG_DIRECTGO_ADDR);
-	__raw_writel(S5P_CHECK_AFTR, REG_DIRECTGO_FLAG);
-
-	save_cpu_arch_register();
-
-	/* Setting Central Sequence Register for power down mode */
-	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
-	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
-	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
-
-	cpu_pm_enter();
-	cpu_suspend(0, idle_finisher);
-
-#ifdef CONFIG_SMP
-	if (!soc_is_exynos5250())
-		scu_enable(S5P_VA_SCU);
-#endif
-	cpu_pm_exit();
-
-	restore_cpu_arch_register();
-
-	/*
-	 * If PMU failed while entering sleep mode, WFI will be
-	 * ignored by PMU and then exiting cpu_do_idle().
-	 * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
-	 * in this situation.
-	 */
-	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
-	if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
-		tmp |= S5P_CENTRAL_LOWPWR_CFG;
-		__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
-	}
-
-	/* Clear wakeup state register */
-	__raw_writel(0x0, S5P_WAKEUP_STAT);
-
-	return index;
-}
-
-static int exynos4_enter_lowpower(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-				int index)
-{
-	int new_index = index;
-
-	/* AFTR can only be entered when cores other than CPU0 are offline */
-	if (num_online_cpus() > 1 || dev->cpu != 0)
-		new_index = drv->safe_state_index;
-
-	if (new_index == 0)
-		return arm_cpuidle_simple_enter(dev, drv, new_index);
-	else
-		return exynos4_enter_core0_aftr(dev, drv, new_index);
-}
-
-static void __init exynos5_core_down_clk(void)
-{
-	unsigned int tmp;
-
-	/*
-	 * Enable arm clock down (in idle) and set arm divider
-	 * ratios in WFI/WFE state.
-	 */
-	tmp = PWR_CTRL1_CORE2_DOWN_RATIO | \
-	      PWR_CTRL1_CORE1_DOWN_RATIO | \
-	      PWR_CTRL1_DIV2_DOWN_EN	 | \
-	      PWR_CTRL1_DIV1_DOWN_EN	 | \
-	      PWR_CTRL1_USE_CORE1_WFE	 | \
-	      PWR_CTRL1_USE_CORE0_WFE	 | \
-	      PWR_CTRL1_USE_CORE1_WFI	 | \
-	      PWR_CTRL1_USE_CORE0_WFI;
-	__raw_writel(tmp, EXYNOS5_PWR_CTRL1);
-
-	/*
-	 * Enable arm clock up (on exiting idle). Set arm divider
-	 * ratios when not in idle along with the standby duration
-	 * ratios.
-	 */
-	tmp = PWR_CTRL2_DIV2_UP_EN	 | \
-	      PWR_CTRL2_DIV1_UP_EN	 | \
-	      PWR_CTRL2_DUR_STANDBY2_VAL | \
-	      PWR_CTRL2_DUR_STANDBY1_VAL | \
-	      PWR_CTRL2_CORE2_UP_RATIO	 | \
-	      PWR_CTRL2_CORE1_UP_RATIO;
-	__raw_writel(tmp, EXYNOS5_PWR_CTRL2);
-}
-
-static int exynos_cpuidle_probe(struct platform_device *pdev)
-{
-	int cpu_id, ret;
-	struct cpuidle_device *device;
-
-	if (soc_is_exynos5250())
-		exynos5_core_down_clk();
-
-	if (soc_is_exynos5440())
-		exynos4_idle_driver.state_count = 1;
-
-	ret = cpuidle_register_driver(&exynos4_idle_driver);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register cpuidle driver\n");
-		return ret;
-	}
-
-	for_each_online_cpu(cpu_id) {
-		device = &per_cpu(exynos4_cpuidle_device, cpu_id);
-		device->cpu = cpu_id;
-
-		ret = cpuidle_register_device(device);
-		if (ret) {
-			dev_err(&pdev->dev, "failed to register cpuidle device\n");
-			return ret;
-		}
-	}
-
-	return 0;
-}
-
-static struct platform_driver exynos_cpuidle_driver = {
-	.probe	= exynos_cpuidle_probe,
-	.driver = {
-		.name = "exynos_cpuidle",
-		.owner = THIS_MODULE,
-	},
-};
-
-module_platform_driver(exynos_cpuidle_driver);
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 4800b1ce3d71..bc43e22693b7 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -169,12 +169,16 @@ void exynos_restart(enum reboot_mode mode, const char *cmd)
 }
 
 static struct platform_device exynos_cpuidle = {
-	.name		= "exynos_cpuidle",
-	.id		= -1,
+	.name              = "exynos_cpuidle",
+	.dev.platform_data = exynos_enter_aftr,
+	.id                = -1,
 };
 
 void __init exynos_cpuidle_init(void)
 {
+	if (soc_is_exynos5440())
+		return;
+
 	platform_device_register(&exynos_cpuidle);
 }
 
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 112bc66927a1..ec02422e8499 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -32,7 +32,7 @@
 
 extern void exynos4_secondary_startup(void);
 
-static void __iomem *sysram_base_addr;
+void __iomem *sysram_base_addr;
 void __iomem *sysram_ns_base_addr;
 
 static void __init exynos_smp_prepare_sysram(void)
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index aba2ff6e443d..87c0d34c7fba 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/suspend.h>
 #include <linux/syscore_ops.h>
+#include <linux/cpu_pm.h>
 #include <linux/io.h>
 #include <linux/irqchip/arm-gic.h>
 #include <linux/err.h>
@@ -165,9 +166,75 @@ int exynos_cluster_power_state(int cluster)
 			S5P_CORE_LOCAL_PWR_EN);
 }
 
+#define EXYNOS_BOOT_VECTOR_ADDR	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
+			S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
+			(sysram_base_addr + 0x24) : S5P_INFORM0))
+#define EXYNOS_BOOT_VECTOR_FLAG	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
+			S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
+			(sysram_base_addr + 0x20) : S5P_INFORM1))
+
+#define S5P_CHECK_AFTR  0xFCBA0D10
+#define S5P_CHECK_SLEEP 0x00000BAD
+
+/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
+static void exynos_set_wakeupmask(long mask)
+{
+	__raw_writel(mask, S5P_WAKEUP_MASK);
+}
+
+static void exynos_cpu_set_boot_vector(long flags)
+{
+	__raw_writel(virt_to_phys(exynos_cpu_resume), EXYNOS_BOOT_VECTOR_ADDR);
+	__raw_writel(flags, EXYNOS_BOOT_VECTOR_FLAG);
+}
+
+void exynos_enter_aftr(void)
+{
+	exynos_set_wakeupmask(0x0000ff3e);
+	exynos_cpu_set_boot_vector(S5P_CHECK_AFTR);
+	/* Set value of power down register for aftr mode */
+	exynos_sys_powerdown_conf(SYS_AFTR);
+}
+
 /* For Cortex-A9 Diagnostic and Power control register */
 static unsigned int save_arm_register[2];
 
+static void exynos_cpu_save_register(void)
+{
+	unsigned long tmp;
+
+	/* Save Power control register */
+	asm ("mrc p15, 0, %0, c15, c0, 0"
+	     : "=r" (tmp) : : "cc");
+
+	save_arm_register[0] = tmp;
+
+	/* Save Diagnostic register */
+	asm ("mrc p15, 0, %0, c15, c0, 1"
+	     : "=r" (tmp) : : "cc");
+
+	save_arm_register[1] = tmp;
+}
+
+static void exynos_cpu_restore_register(void)
+{
+	unsigned long tmp;
+
+	/* Restore Power control register */
+	tmp = save_arm_register[0];
+
+	asm volatile ("mcr p15, 0, %0, c15, c0, 0"
+		      : : "r" (tmp)
+		      : "cc");
+
+	/* Restore Diagnostic register */
+	tmp = save_arm_register[1];
+
+	asm volatile ("mcr p15, 0, %0, c15, c0, 1"
+		      : : "r" (tmp)
+		      : "cc");
+}
+
 static int exynos_cpu_suspend(unsigned long arg)
 {
 #ifdef CONFIG_CACHE_L2X0
@@ -212,37 +279,34 @@ static void exynos_pm_prepare(void)
 	__raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0);
 }
 
-static int exynos_pm_suspend(void)
+static void exynos_pm_central_suspend(void)
 {
 	unsigned long tmp;
 
 	/* Setting Central Sequence Register for power down mode */
-
 	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
 	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
 	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+}
+
+static int exynos_pm_suspend(void)
+{
+	unsigned long tmp;
+
+	exynos_pm_central_suspend();
 
 	/* Setting SEQ_OPTION register */
 
 	tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0);
 	__raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
 
-	if (!soc_is_exynos5250()) {
-		/* Save Power control register */
-		asm ("mrc p15, 0, %0, c15, c0, 0"
-		     : "=r" (tmp) : : "cc");
-		save_arm_register[0] = tmp;
-
-		/* Save Diagnostic register */
-		asm ("mrc p15, 0, %0, c15, c0, 1"
-		     : "=r" (tmp) : : "cc");
-		save_arm_register[1] = tmp;
-	}
+	if (!soc_is_exynos5250())
+		exynos_cpu_save_register();
 
 	return 0;
 }
 
-static void exynos_pm_resume(void)
+static int exynos_pm_central_resume(void)
 {
 	unsigned long tmp;
 
@@ -259,22 +323,20 @@ static void exynos_pm_resume(void)
 		/* clear the wakeup state register */
 		__raw_writel(0x0, S5P_WAKEUP_STAT);
 		/* No need to perform below restore code */
-		goto early_wakeup;
-	}
-	if (!soc_is_exynos5250()) {
-		/* Restore Power control register */
-		tmp = save_arm_register[0];
-		asm volatile ("mcr p15, 0, %0, c15, c0, 0"
-			      : : "r" (tmp)
-			      : "cc");
-
-		/* Restore Diagnostic register */
-		tmp = save_arm_register[1];
-		asm volatile ("mcr p15, 0, %0, c15, c0, 1"
-			      : : "r" (tmp)
-			      : "cc");
+		return -1;
 	}
 
+	return 0;
+}
+
+static void exynos_pm_resume(void)
+{
+	if (exynos_pm_central_resume())
+		goto early_wakeup;
+
+	if (!soc_is_exynos5250())
+		exynos_cpu_restore_register();
+
 	/* For release retention */
 
 	__raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION);
@@ -291,7 +353,7 @@ static void exynos_pm_resume(void)
 
 	s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
 
-	if (IS_ENABLED(CONFIG_SMP) && !soc_is_exynos5250())
+	if (!soc_is_exynos5250())
 		scu_enable(S5P_VA_SCU);
 
 early_wakeup:
@@ -369,10 +431,42 @@ static const struct platform_suspend_ops exynos_suspend_ops = {
 	.valid		= suspend_valid_only_mem,
 };
 
+static int exynos_cpu_pm_notifier(struct notifier_block *self,
+				  unsigned long cmd, void *v)
+{
+	int cpu = smp_processor_id();
+
+	switch (cmd) {
+	case CPU_PM_ENTER:
+		if (cpu == 0) {
+			exynos_pm_central_suspend();
+			exynos_cpu_save_register();
+		}
+		break;
+
+	case CPU_PM_EXIT:
+		if (cpu == 0) {
+			if (!soc_is_exynos5250())
+				scu_enable(S5P_VA_SCU);
+			exynos_cpu_restore_register();
+			exynos_pm_central_resume();
+		}
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block exynos_cpu_pm_notifier_block = {
+	.notifier_call = exynos_cpu_pm_notifier,
+};
+
 void __init exynos_pm_init(void)
 {
 	u32 tmp;
 
+	cpu_pm_register_notifier(&exynos_cpu_pm_notifier_block);
+
 	/* Platform-specific GIC callback */
 	gic_arch_extn.irq_set_wake = exynos_irq_set_wake;
 
diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h
index 4179f6a6d595..1d13b08708f0 100644
--- a/arch/arm/mach-exynos/regs-pmu.h
+++ b/arch/arm/mach-exynos/regs-pmu.h
@@ -129,8 +129,6 @@
 #define S5P_CORE_LOCAL_PWR_EN			0x3
 #define S5P_INT_LOCAL_PWR_EN			0x7
 
-#define S5P_CHECK_SLEEP				0x00000BAD
-
 /* Only for EXYNOS4210 */
 #define S5P_CMU_CLKSTOP_LCD1_LOWPWR	S5P_PMUREG(0x1154)
 #define S5P_CMU_RESET_LCD1_LOWPWR	S5P_PMUREG(0x1174)
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 0a0a90f52d26..0e87a34b6472 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -132,6 +132,8 @@ source "drivers/staging/Kconfig"
 
 source "drivers/platform/Kconfig"
 
+source "drivers/soc/Kconfig"
+
 source "drivers/clk/Kconfig"
 
 source "drivers/hwspinlock/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 7183b6af5dac..1a1790e4de6a 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -33,6 +33,9 @@ obj-y				+= amba/
 # really early.
 obj-$(CONFIG_DMADEVICES)	+= dma/
 
+# SOC specific infrastructure drivers.
+obj-y				+= soc/
+
 obj-$(CONFIG_VIRTIO)		+= virtio/
 obj-$(CONFIG_XEN)		+= xen/
 
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 286342778884..a118ec1650fa 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -4,6 +4,14 @@
 
 menu "Bus devices"
 
+config BRCMSTB_GISB_ARB
+	bool "Broadcom STB GISB bus arbiter"
+	depends on ARM
+	help
+	  Driver for the Broadcom Set Top Box System-on-a-chip internal bus
+	  arbiter. This driver provides timeout and target abort error handling
+	  and internal bus master decoding.
+
 config IMX_WEIM
 	bool "Freescale EIM DRIVER"
 	depends on ARCH_MXC
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index f095aa771de9..6a4ea7e4af1a 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -2,6 +2,7 @@
 # Makefile for the bus drivers.
 #
 
+obj-$(CONFIG_BRCMSTB_GISB_ARB)	+= brcmstb_gisb.o
 obj-$(CONFIG_IMX_WEIM)	+= imx-weim.o
 obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o
 obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c
new file mode 100644
index 000000000000..6159b7752a64
--- /dev/null
+++ b/drivers/bus/brcmstb_gisb.c
@@ -0,0 +1,289 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/sysfs.h>
+#include <linux/io.h>
+#include <linux/string.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/of.h>
+#include <linux/bitops.h>
+
+#include <asm/bug.h>
+#include <asm/signal.h>
+
+#define ARB_TIMER			0x008
+#define ARB_ERR_CAP_CLR			0x7e4
+#define  ARB_ERR_CAP_CLEAR		(1 << 0)
+#define ARB_ERR_CAP_HI_ADDR		0x7e8
+#define ARB_ERR_CAP_ADDR		0x7ec
+#define ARB_ERR_CAP_DATA		0x7f0
+#define ARB_ERR_CAP_STATUS		0x7f4
+#define  ARB_ERR_CAP_STATUS_TIMEOUT	(1 << 12)
+#define  ARB_ERR_CAP_STATUS_TEA		(1 << 11)
+#define  ARB_ERR_CAP_STATUS_BS_SHIFT	(1 << 2)
+#define  ARB_ERR_CAP_STATUS_BS_MASK	0x3c
+#define  ARB_ERR_CAP_STATUS_WRITE	(1 << 1)
+#define  ARB_ERR_CAP_STATUS_VALID	(1 << 0)
+#define ARB_ERR_CAP_MASTER		0x7f8
+
+struct brcmstb_gisb_arb_device {
+	void __iomem	*base;
+	struct mutex	lock;
+	struct list_head next;
+	u32 valid_mask;
+	const char *master_names[sizeof(u32) * BITS_PER_BYTE];
+};
+
+static LIST_HEAD(brcmstb_gisb_arb_device_list);
+
+static ssize_t gisb_arb_get_timeout(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct brcmstb_gisb_arb_device *gdev = platform_get_drvdata(pdev);
+	u32 timeout;
+
+	mutex_lock(&gdev->lock);
+	timeout = ioread32(gdev->base + ARB_TIMER);
+	mutex_unlock(&gdev->lock);
+
+	return sprintf(buf, "%d", timeout);
+}
+
+static ssize_t gisb_arb_set_timeout(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct brcmstb_gisb_arb_device *gdev = platform_get_drvdata(pdev);
+	int val, ret;
+
+	ret = kstrtoint(buf, 10, &val);
+	if (ret < 0)
+		return ret;
+
+	if (val == 0 || val >= 0xffffffff)
+		return -EINVAL;
+
+	mutex_lock(&gdev->lock);
+	iowrite32(val, gdev->base + ARB_TIMER);
+	mutex_unlock(&gdev->lock);
+
+	return count;
+}
+
+static const char *
+brcmstb_gisb_master_to_str(struct brcmstb_gisb_arb_device *gdev,
+						u32 masters)
+{
+	u32 mask = gdev->valid_mask & masters;
+
+	if (hweight_long(mask) != 1)
+		return NULL;
+
+	return gdev->master_names[ffs(mask) - 1];
+}
+
+static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
+					const char *reason)
+{
+	u32 cap_status;
+	unsigned long arb_addr;
+	u32 master;
+	const char *m_name;
+	char m_fmt[11];
+
+	cap_status = ioread32(gdev->base + ARB_ERR_CAP_STATUS);
+
+	/* Invalid captured address, bail out */
+	if (!(cap_status & ARB_ERR_CAP_STATUS_VALID))
+		return 1;
+
+	/* Read the address and master */
+	arb_addr = ioread32(gdev->base + ARB_ERR_CAP_ADDR) & 0xffffffff;
+#if (IS_ENABLED(CONFIG_PHYS_ADDR_T_64BIT))
+	arb_addr |= (u64)ioread32(gdev->base + ARB_ERR_CAP_HI_ADDR) << 32;
+#endif
+	master = ioread32(gdev->base + ARB_ERR_CAP_MASTER);
+
+	m_name = brcmstb_gisb_master_to_str(gdev, master);
+	if (!m_name) {
+		snprintf(m_fmt, sizeof(m_fmt), "0x%08x", master);
+		m_name = m_fmt;
+	}
+
+	pr_crit("%s: %s at 0x%lx [%c %s], core: %s\n",
+		__func__, reason, arb_addr,
+		cap_status & ARB_ERR_CAP_STATUS_WRITE ? 'W' : 'R',
+		cap_status & ARB_ERR_CAP_STATUS_TIMEOUT ? "timeout" : "",
+		m_name);
+
+	/* clear the GISB error */
+	iowrite32(ARB_ERR_CAP_CLEAR, gdev->base + ARB_ERR_CAP_CLR);
+
+	return 0;
+}
+
+static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
+				     struct pt_regs *regs)
+{
+	int ret = 0;
+	struct brcmstb_gisb_arb_device *gdev;
+
+	/* iterate over each GISB arb registered handlers */
+	list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next)
+		ret |= brcmstb_gisb_arb_decode_addr(gdev, "bus error");
+	/*
+	 * If it was an imprecise abort, then we need to correct the
+	 * return address to be _after_ the instruction.
+	*/
+	if (fsr & (1 << 10))
+		regs->ARM_pc += 4;
+
+	return ret;
+}
+
+void __init brcmstb_hook_fault_code(void)
+{
+	hook_fault_code(22, brcmstb_bus_error_handler, SIGBUS, 0,
+			"imprecise external abort");
+}
+
+static irqreturn_t brcmstb_gisb_timeout_handler(int irq, void *dev_id)
+{
+	brcmstb_gisb_arb_decode_addr(dev_id, "timeout");
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t brcmstb_gisb_tea_handler(int irq, void *dev_id)
+{
+	brcmstb_gisb_arb_decode_addr(dev_id, "target abort");
+
+	return IRQ_HANDLED;
+}
+
+static DEVICE_ATTR(gisb_arb_timeout, S_IWUSR | S_IRUGO,
+		gisb_arb_get_timeout, gisb_arb_set_timeout);
+
+static struct attribute *gisb_arb_sysfs_attrs[] = {
+	&dev_attr_gisb_arb_timeout.attr,
+	NULL,
+};
+
+static struct attribute_group gisb_arb_sysfs_attr_group = {
+	.attrs = gisb_arb_sysfs_attrs,
+};
+
+static int brcmstb_gisb_arb_probe(struct platform_device *pdev)
+{
+	struct device_node *dn = pdev->dev.of_node;
+	struct brcmstb_gisb_arb_device *gdev;
+	struct resource *r;
+	int err, timeout_irq, tea_irq;
+	unsigned int num_masters, j = 0;
+	int i, first, last;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	timeout_irq = platform_get_irq(pdev, 0);
+	tea_irq = platform_get_irq(pdev, 1);
+
+	gdev = devm_kzalloc(&pdev->dev, sizeof(*gdev), GFP_KERNEL);
+	if (!gdev)
+		return -ENOMEM;
+
+	mutex_init(&gdev->lock);
+	INIT_LIST_HEAD(&gdev->next);
+
+	gdev->base = devm_request_and_ioremap(&pdev->dev, r);
+	if (!gdev->base)
+		return -ENOMEM;
+
+	err = devm_request_irq(&pdev->dev, timeout_irq,
+				brcmstb_gisb_timeout_handler, 0, pdev->name,
+				gdev);
+	if (err < 0)
+		return err;
+
+	err = devm_request_irq(&pdev->dev, tea_irq,
+				brcmstb_gisb_tea_handler, 0, pdev->name,
+				gdev);
+	if (err < 0)
+		return err;
+
+	/* If we do not have a valid mask, assume all masters are enabled */
+	if (of_property_read_u32(dn, "brcm,gisb-arb-master-mask",
+				&gdev->valid_mask))
+		gdev->valid_mask = 0xffffffff;
+
+	/* Proceed with reading the litteral names if we agree on the
+	 * number of masters
+	 */
+	num_masters = of_property_count_strings(dn,
+			"brcm,gisb-arb-master-names");
+	if (hweight_long(gdev->valid_mask) == num_masters) {
+		first = ffs(gdev->valid_mask) - 1;
+		last = fls(gdev->valid_mask) - 1;
+
+		for (i = first; i < last; i++) {
+			if (!(gdev->valid_mask & BIT(i)))
+				continue;
+
+			of_property_read_string_index(dn,
+					"brcm,gisb-arb-master-names", j,
+					&gdev->master_names[i]);
+			j++;
+		}
+	}
+
+	err = sysfs_create_group(&pdev->dev.kobj, &gisb_arb_sysfs_attr_group);
+	if (err)
+		return err;
+
+	platform_set_drvdata(pdev, gdev);
+
+	list_add_tail(&gdev->next, &brcmstb_gisb_arb_device_list);
+
+	dev_info(&pdev->dev, "registered mem: %p, irqs: %d, %d\n",
+			gdev->base, timeout_irq, tea_irq);
+
+	return 0;
+}
+
+static const struct of_device_id brcmstb_gisb_arb_of_match[] = {
+	{ .compatible = "brcm,gisb-arb" },
+	{ },
+};
+
+static struct platform_driver brcmstb_gisb_arb_driver = {
+	.probe	= brcmstb_gisb_arb_probe,
+	.driver = {
+		.name	= "brcm-gisb-arb",
+		.owner	= THIS_MODULE,
+		.of_match_table = brcmstb_gisb_arb_of_match,
+	},
+};
+
+static int __init brcm_gisb_driver_init(void)
+{
+	return platform_driver_register(&brcmstb_gisb_arb_driver);
+}
+
+module_init(brcm_gisb_driver_init);
diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
index feeecae623f6..531ae591783b 100644
--- a/drivers/bus/omap_l3_noc.c
+++ b/drivers/bus/omap_l3_noc.c
@@ -1,43 +1,45 @@
 /*
- * OMAP4XXX L3 Interconnect error handling driver
+ * OMAP L3 Interconnect error handling driver
  *
- * Copyright (C) 2011 Texas Corporation
+ * Copyright (C) 2011-2014 Texas Instruments Incorporated - http://www.ti.com/
  *	Santosh Shilimkar <santosh.shilimkar@ti.com>
  *	Sricharan <r.sricharan@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
  */
-#include <linux/module.h>
 #include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
 #include <linux/slab.h>
 
 #include "omap_l3_noc.h"
 
-/*
- * Interrupt Handler for L3 error detection.
- *	1) Identify the L3 clockdomain partition to which the error belongs to.
- *	2) Identify the slave where the error information is logged
- *	3) Print the logged information.
- *	4) Add dump stack to provide kernel trace.
+/**
+ * l3_handle_target() - Handle Target specific parse and reporting
+ * @l3:		pointer to l3 struct
+ * @base:	base address of clkdm
+ * @flag_mux:	flagmux corresponding to the event
+ * @err_src:	error source index of the slave (target)
  *
- * Two Types of errors :
+ * This does the second part of the error interrupt handling:
+ *	3) Parse in the slave information
+ *	4) Print the logged information.
+ *	5) Add dump stack to provide kernel trace.
+ *	6) Clear the source if known.
+ *
+ * This handles two types of errors:
  *	1) Custom errors in L3 :
  *		Target like DMM/FW/EMIF generates SRESP=ERR error
  *	2) Standard L3 error:
@@ -53,214 +55,264 @@
  *	can be trapped as well. But the trapping is implemented as part
  *	secure software and hence need not be implemented here.
  */
-static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
+static int l3_handle_target(struct omap_l3 *l3, void __iomem *base,
+			    struct l3_flagmux_data *flag_mux, int err_src)
 {
+	int k;
+	u32 std_err_main, clear, masterid;
+	u8 op_code, m_req_info;
+	void __iomem *l3_targ_base;
+	void __iomem *l3_targ_stderr, *l3_targ_slvofslsb, *l3_targ_mstaddr;
+	void __iomem *l3_targ_hdr, *l3_targ_info;
+	struct l3_target_data *l3_targ_inst;
+	struct l3_masters_data *master;
+	char *target_name, *master_name = "UN IDENTIFIED";
+	char *err_description;
+	char err_string[30] = { 0 };
+	char info_string[60] = { 0 };
+
+	/* We DONOT expect err_src to go out of bounds */
+	BUG_ON(err_src > MAX_CLKDM_TARGETS);
+
+	if (err_src < flag_mux->num_targ_data) {
+		l3_targ_inst = &flag_mux->l3_targ[err_src];
+		target_name = l3_targ_inst->name;
+		l3_targ_base = base + l3_targ_inst->offset;
+	} else {
+		target_name = L3_TARGET_NOT_SUPPORTED;
+	}
 
-	struct omap4_l3 *l3 = _l3;
-	int inttype, i, k;
+	if (target_name == L3_TARGET_NOT_SUPPORTED)
+		return -ENODEV;
+
+	/* Read the stderrlog_main_source from clk domain */
+	l3_targ_stderr = l3_targ_base + L3_TARG_STDERRLOG_MAIN;
+	l3_targ_slvofslsb = l3_targ_base + L3_TARG_STDERRLOG_SLVOFSLSB;
+
+	std_err_main = readl_relaxed(l3_targ_stderr);
+
+	switch (std_err_main & CUSTOM_ERROR) {
+	case STANDARD_ERROR:
+		err_description = "Standard";
+		snprintf(err_string, sizeof(err_string),
+			 ": At Address: 0x%08X ",
+			 readl_relaxed(l3_targ_slvofslsb));
+
+		l3_targ_mstaddr = l3_targ_base + L3_TARG_STDERRLOG_MSTADDR;
+		l3_targ_hdr = l3_targ_base + L3_TARG_STDERRLOG_HDR;
+		l3_targ_info = l3_targ_base + L3_TARG_STDERRLOG_INFO;
+		break;
+
+	case CUSTOM_ERROR:
+		err_description = "Custom";
+
+		l3_targ_mstaddr = l3_targ_base +
+				  L3_TARG_STDERRLOG_CINFO_MSTADDR;
+		l3_targ_hdr = l3_targ_base + L3_TARG_STDERRLOG_CINFO_OPCODE;
+		l3_targ_info = l3_targ_base + L3_TARG_STDERRLOG_CINFO_INFO;
+		break;
+
+	default:
+		/* Nothing to be handled here as of now */
+		return 0;
+	}
+
+	/* STDERRLOG_MSTADDR Stores the NTTP master address. */
+	masterid = (readl_relaxed(l3_targ_mstaddr) &
+		    l3->mst_addr_mask) >> __ffs(l3->mst_addr_mask);
+
+	for (k = 0, master = l3->l3_masters; k < l3->num_masters;
+	     k++, master++) {
+		if (masterid == master->id) {
+			master_name = master->name;
+			break;
+		}
+	}
+
+	op_code = readl_relaxed(l3_targ_hdr) & 0x7;
+
+	m_req_info = readl_relaxed(l3_targ_info) & 0xF;
+	snprintf(info_string, sizeof(info_string),
+		 ": %s in %s mode during %s access",
+		 (m_req_info & BIT(0)) ? "Opcode Fetch" : "Data Access",
+		 (m_req_info & BIT(1)) ? "Supervisor" : "User",
+		 (m_req_info & BIT(3)) ? "Debug" : "Functional");
+
+	WARN(true,
+	     "%s:L3 %s Error: MASTER %s TARGET %s (%s)%s%s\n",
+	     dev_name(l3->dev),
+	     err_description,
+	     master_name, target_name,
+	     l3_transaction_type[op_code],
+	     err_string, info_string);
+
+	/* clear the std error log*/
+	clear = std_err_main | CLEAR_STDERR_LOG;
+	writel_relaxed(clear, l3_targ_stderr);
+
+	return 0;
+}
+
+/**
+ * l3_interrupt_handler() - interrupt handler for l3 events
+ * @irq:	irq number
+ * @_l3:	pointer to l3 structure
+ *
+ * Interrupt Handler for L3 error detection.
+ *	1) Identify the L3 clockdomain partition to which the error belongs to.
+ *	2) Identify the slave where the error information is logged
+ *	... handle the slave event..
+ *	7) if the slave is unknown, mask out the slave.
+ */
+static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
+{
+	struct omap_l3 *l3 = _l3;
+	int inttype, i, ret;
 	int err_src = 0;
-	u32 std_err_main, err_reg, clear, masterid;
-	void __iomem *base, *l3_targ_base;
-	char *target_name, *master_name = "UN IDENTIFIED";
+	u32 err_reg, mask_val;
+	void __iomem *base, *mask_reg;
+	struct l3_flagmux_data *flag_mux;
 
 	/* Get the Type of interrupt */
 	inttype = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
 
-	for (i = 0; i < L3_MODULES; i++) {
+	for (i = 0; i < l3->num_modules; i++) {
 		/*
 		 * Read the regerr register of the clock domain
 		 * to determine the source
 		 */
 		base = l3->l3_base[i];
-		err_reg = __raw_readl(base + l3_flagmux[i] +
-					+ L3_FLAGMUX_REGERR0 + (inttype << 3));
+		flag_mux = l3->l3_flagmux[i];
+		err_reg = readl_relaxed(base + flag_mux->offset +
+					L3_FLAGMUX_REGERR0 + (inttype << 3));
+
+		err_reg &= ~(inttype ? flag_mux->mask_app_bits :
+				flag_mux->mask_dbg_bits);
 
 		/* Get the corresponding error and analyse */
 		if (err_reg) {
 			/* Identify the source from control status register */
 			err_src = __ffs(err_reg);
 
-			/* Read the stderrlog_main_source from clk domain */
-			l3_targ_base = base + *(l3_targ[i] + err_src);
-			std_err_main =  __raw_readl(l3_targ_base +
-					L3_TARG_STDERRLOG_MAIN);
-			masterid = __raw_readl(l3_targ_base +
-					L3_TARG_STDERRLOG_MSTADDR);
-
-			switch (std_err_main & CUSTOM_ERROR) {
-			case STANDARD_ERROR:
-				target_name =
-					l3_targ_inst_name[i][err_src];
-				WARN(true, "L3 standard error: TARGET:%s at address 0x%x\n",
-					target_name,
-					__raw_readl(l3_targ_base +
-						L3_TARG_STDERRLOG_SLVOFSLSB));
-				/* clear the std error log*/
-				clear = std_err_main | CLEAR_STDERR_LOG;
-				writel(clear, l3_targ_base +
-					L3_TARG_STDERRLOG_MAIN);
-				break;
-
-			case CUSTOM_ERROR:
-				target_name =
-					l3_targ_inst_name[i][err_src];
-				for (k = 0; k < NUM_OF_L3_MASTERS; k++) {
-					if (masterid == l3_masters[k].id)
-						master_name =
-							l3_masters[k].name;
-				}
-				WARN(true, "L3 custom error: MASTER:%s TARGET:%s\n",
-					master_name, target_name);
-				/* clear the std error log*/
-				clear = std_err_main | CLEAR_STDERR_LOG;
-				writel(clear, l3_targ_base +
-					L3_TARG_STDERRLOG_MAIN);
-				break;
-
-			default:
-				/* Nothing to be handled here as of now */
-				break;
+			ret = l3_handle_target(l3, base, flag_mux, err_src);
+
+			/*
+			 * Certain plaforms may have "undocumented" status
+			 * pending on boot. So dont generate a severe warning
+			 * here. Just mask it off to prevent the error from
+			 * reoccuring and locking up the system.
+			 */
+			if (ret) {
+				dev_err(l3->dev,
+					"L3 %s error: target %d mod:%d %s\n",
+					inttype ? "debug" : "application",
+					err_src, i, "(unclearable)");
+
+				mask_reg = base + flag_mux->offset +
+					   L3_FLAGMUX_MASK0 + (inttype << 3);
+				mask_val = readl_relaxed(mask_reg);
+				mask_val &= ~(1 << err_src);
+				writel_relaxed(mask_val, mask_reg);
+
+				/* Mark these bits as to be ignored */
+				if (inttype)
+					flag_mux->mask_app_bits |= 1 << err_src;
+				else
+					flag_mux->mask_dbg_bits |= 1 << err_src;
 			}
-		/* Error found so break the for loop */
-		break;
+
+			/* Error found so break the for loop */
+			break;
 		}
 	}
 	return IRQ_HANDLED;
 }
 
-static int omap4_l3_probe(struct platform_device *pdev)
+static const struct of_device_id l3_noc_match[] = {
+	{.compatible = "ti,omap4-l3-noc", .data = &omap_l3_data},
+	{.compatible = "ti,dra7-l3-noc", .data = &dra_l3_data},
+	{.compatible = "ti,am4372-l3-noc", .data = &am4372_l3_data},
+	{},
+};
+MODULE_DEVICE_TABLE(of, l3_noc_match);
+
+static int omap_l3_probe(struct platform_device *pdev)
 {
-	static struct omap4_l3 *l3;
-	struct resource	*res;
-	int ret;
+	const struct of_device_id *of_id;
+	static struct omap_l3 *l3;
+	int ret, i, res_idx;
+
+	of_id = of_match_device(l3_noc_match, &pdev->dev);
+	if (!of_id) {
+		dev_err(&pdev->dev, "OF data missing\n");
+		return -EINVAL;
+	}
 
-	l3 = kzalloc(sizeof(*l3), GFP_KERNEL);
+	l3 = devm_kzalloc(&pdev->dev, sizeof(*l3), GFP_KERNEL);
 	if (!l3)
 		return -ENOMEM;
 
+	memcpy(l3, of_id->data, sizeof(*l3));
+	l3->dev = &pdev->dev;
 	platform_set_drvdata(pdev, l3);
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "couldn't find resource 0\n");
-		ret = -ENODEV;
-		goto err0;
-	}
-
-	l3->l3_base[0] = ioremap(res->start, resource_size(res));
-	if (!l3->l3_base[0]) {
-		dev_err(&pdev->dev, "ioremap failed\n");
-		ret = -ENOMEM;
-		goto err0;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!res) {
-		dev_err(&pdev->dev, "couldn't find resource 1\n");
-		ret = -ENODEV;
-		goto err1;
-	}
-
-	l3->l3_base[1] = ioremap(res->start, resource_size(res));
-	if (!l3->l3_base[1]) {
-		dev_err(&pdev->dev, "ioremap failed\n");
-		ret = -ENOMEM;
-		goto err1;
-	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
-	if (!res) {
-		dev_err(&pdev->dev, "couldn't find resource 2\n");
-		ret = -ENODEV;
-		goto err2;
-	}
+	/* Get mem resources */
+	for (i = 0, res_idx = 0; i < l3->num_modules; i++) {
+		struct resource	*res;
 
-	l3->l3_base[2] = ioremap(res->start, resource_size(res));
-	if (!l3->l3_base[2]) {
-		dev_err(&pdev->dev, "ioremap failed\n");
-		ret = -ENOMEM;
-		goto err2;
+		if (l3->l3_base[i] == L3_BASE_IS_SUBMODULE) {
+			/* First entry cannot be submodule */
+			BUG_ON(i == 0);
+			l3->l3_base[i] = l3->l3_base[i - 1];
+			continue;
+		}
+		res = platform_get_resource(pdev, IORESOURCE_MEM, res_idx);
+		l3->l3_base[i] = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(l3->l3_base[i])) {
+			dev_err(l3->dev, "ioremap %d failed\n", i);
+			return PTR_ERR(l3->l3_base[i]);
+		}
+		res_idx++;
 	}
 
 	/*
 	 * Setup interrupt Handlers
 	 */
 	l3->debug_irq = platform_get_irq(pdev, 0);
-	ret = request_irq(l3->debug_irq,
-			l3_interrupt_handler,
-			IRQF_DISABLED, "l3-dbg-irq", l3);
+	ret = devm_request_irq(l3->dev, l3->debug_irq, l3_interrupt_handler,
+			       IRQF_DISABLED, "l3-dbg-irq", l3);
 	if (ret) {
-		pr_crit("L3: request_irq failed to register for 0x%x\n",
-						l3->debug_irq);
-		goto err3;
+		dev_err(l3->dev, "request_irq failed for %d\n",
+			l3->debug_irq);
+		return ret;
 	}
 
 	l3->app_irq = platform_get_irq(pdev, 1);
-	ret = request_irq(l3->app_irq,
-			l3_interrupt_handler,
-			IRQF_DISABLED, "l3-app-irq", l3);
-	if (ret) {
-		pr_crit("L3: request_irq failed to register for 0x%x\n",
-						l3->app_irq);
-		goto err4;
-	}
+	ret = devm_request_irq(l3->dev, l3->app_irq, l3_interrupt_handler,
+			       IRQF_DISABLED, "l3-app-irq", l3);
+	if (ret)
+		dev_err(l3->dev, "request_irq failed for %d\n", l3->app_irq);
 
-	return 0;
-
-err4:
-	free_irq(l3->debug_irq, l3);
-err3:
-	iounmap(l3->l3_base[2]);
-err2:
-	iounmap(l3->l3_base[1]);
-err1:
-	iounmap(l3->l3_base[0]);
-err0:
-	kfree(l3);
 	return ret;
 }
 
-static int omap4_l3_remove(struct platform_device *pdev)
-{
-	struct omap4_l3 *l3 = platform_get_drvdata(pdev);
-
-	free_irq(l3->app_irq, l3);
-	free_irq(l3->debug_irq, l3);
-	iounmap(l3->l3_base[0]);
-	iounmap(l3->l3_base[1]);
-	iounmap(l3->l3_base[2]);
-	kfree(l3);
-
-	return 0;
-}
-
-#if defined(CONFIG_OF)
-static const struct of_device_id l3_noc_match[] = {
-	{.compatible = "ti,omap4-l3-noc", },
-	{},
-};
-MODULE_DEVICE_TABLE(of, l3_noc_match);
-#else
-#define l3_noc_match NULL
-#endif
-
-static struct platform_driver omap4_l3_driver = {
-	.probe		= omap4_l3_probe,
-	.remove		= omap4_l3_remove,
+static struct platform_driver omap_l3_driver = {
+	.probe		= omap_l3_probe,
 	.driver		= {
 		.name		= "omap_l3_noc",
 		.owner		= THIS_MODULE,
-		.of_match_table = l3_noc_match,
+		.of_match_table = of_match_ptr(l3_noc_match),
 	},
 };
 
-static int __init omap4_l3_init(void)
+static int __init omap_l3_init(void)
 {
-	return platform_driver_register(&omap4_l3_driver);
+	return platform_driver_register(&omap_l3_driver);
 }
-postcore_initcall_sync(omap4_l3_init);
+postcore_initcall_sync(omap_l3_init);
 
-static void __exit omap4_l3_exit(void)
+static void __exit omap_l3_exit(void)
 {
-	platform_driver_unregister(&omap4_l3_driver);
+	platform_driver_unregister(&omap_l3_driver);
 }
-module_exit(omap4_l3_exit);
+module_exit(omap_l3_exit);
diff --git a/drivers/bus/omap_l3_noc.h b/drivers/bus/omap_l3_noc.h
index a6ce34dc4814..551e01061434 100644
--- a/drivers/bus/omap_l3_noc.h
+++ b/drivers/bus/omap_l3_noc.h
@@ -1,29 +1,25 @@
 /*
- * OMAP4XXX L3 Interconnect  error handling driver header
+ * OMAP L3 Interconnect  error handling driver header
  *
- * Copyright (C) 2011 Texas Corporation
+ * Copyright (C) 2011-2014 Texas Instruments Incorporated - http://www.ti.com/
  *	Santosh Shilimkar <santosh.shilimkar@ti.com>
  *	sricharan <r.sricharan@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
  */
-#ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
-#define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
+#ifndef __OMAP_L3_NOC_H
+#define __OMAP_L3_NOC_H
+
+#define MAX_L3_MODULES			3
+#define MAX_CLKDM_TARGETS		31
 
-#define L3_MODULES			3
 #define CLEAR_STDERR_LOG		(1 << 31)
 #define CUSTOM_ERROR			0x2
 #define STANDARD_ERROR			0x0
@@ -33,63 +29,165 @@
 
 /* L3 TARG register offsets */
 #define L3_TARG_STDERRLOG_MAIN		0x48
+#define L3_TARG_STDERRLOG_HDR		0x4c
+#define L3_TARG_STDERRLOG_MSTADDR	0x50
+#define L3_TARG_STDERRLOG_INFO		0x58
 #define L3_TARG_STDERRLOG_SLVOFSLSB	0x5c
-#define L3_TARG_STDERRLOG_MSTADDR	0x68
+#define L3_TARG_STDERRLOG_CINFO_INFO	0x64
+#define L3_TARG_STDERRLOG_CINFO_MSTADDR	0x68
+#define L3_TARG_STDERRLOG_CINFO_OPCODE	0x6c
 #define L3_FLAGMUX_REGERR0		0xc
+#define L3_FLAGMUX_MASK0		0x8
+
+#define L3_TARGET_NOT_SUPPORTED		NULL
+
+#define L3_BASE_IS_SUBMODULE		((void __iomem *)(1 << 0))
+
+static const char * const l3_transaction_type[] = {
+	/* 0 0 0 */ "Idle",
+	/* 0 0 1 */ "Write",
+	/* 0 1 0 */ "Read",
+	/* 0 1 1 */ "ReadEx",
+	/* 1 0 0 */ "Read Link",
+	/* 1 0 1 */ "Write Non-Posted",
+	/* 1 1 0 */ "Write Conditional",
+	/* 1 1 1 */ "Write Broadcast",
+};
 
-#define NUM_OF_L3_MASTERS	(sizeof(l3_masters)/sizeof(l3_masters[0]))
-
-static u32 l3_flagmux[L3_MODULES] = {
-	0x500,
-	0x1000,
-	0X0200
-};
-
-/* L3 Target standard Error register offsets */
-static u32 l3_targ_inst_clk1[] = {
-	0x100, /* DMM1 */
-	0x200, /* DMM2 */
-	0x300, /* ABE */
-	0x400, /* L4CFG */
-	0x600,  /* CLK2 PWR DISC */
-	0x0,	/* Host CLK1 */
-	0x900	/* L4 Wakeup */
-};
-
-static u32 l3_targ_inst_clk2[] = {
-	0x500, /* CORTEX M3 */
-	0x300, /* DSS */
-	0x100, /* GPMC */
-	0x400, /* ISS */
-	0x700, /* IVAHD */
-	0xD00, /* missing in TRM  corresponds to AES1*/
-	0x900, /* L4 PER0*/
-	0x200, /* OCMRAM */
-	0x100, /* missing in TRM corresponds to GPMC sERROR*/
-	0x600, /* SGX */
-	0x800, /* SL2 */
-	0x1600, /* C2C */
-	0x1100,	/* missing in TRM corresponds PWR DISC CLK1*/
-	0xF00, /* missing in TRM corrsponds to SHA1*/
-	0xE00, /* missing in TRM corresponds to AES2*/
-	0xC00, /* L4 PER3 */
-	0xA00, /* L4 PER1*/
-	0xB00, /* L4 PER2*/
-	0x0, /* HOST CLK2 */
-	0x1800, /* CAL */
-	0x1700 /* LLI */
-};
-
-static u32 l3_targ_inst_clk3[] = {
-	0x0100	/* EMUSS */,
-	0x0300, /* DEBUGSS_CT_TBR */
-	0x0 /* HOST CLK3 */
-};
-
-static struct l3_masters_data {
+/**
+ * struct l3_masters_data - L3 Master information
+ * @id:		ID of the L3 Master
+ * @name:	master name
+ */
+struct l3_masters_data {
 	u32 id;
-	char name[10];
-} l3_masters[] = {
+	char *name;
+};
+
+/**
+ * struct l3_target_data - L3 Target information
+ * @offset:	Offset from base for L3 Target
+ * @name:	Target name
+ *
+ * Target information is organized indexed by bit field definitions.
+ */
+struct l3_target_data {
+	u32 offset;
+	char *name;
+};
+
+/**
+ * struct l3_flagmux_data - Flag Mux information
+ * @offset:	offset from base for flagmux register
+ * @l3_targ:	array indexed by flagmux index (bit offset) pointing to the
+ *		target data. unsupported ones are marked with
+ *		L3_TARGET_NOT_SUPPORTED
+ * @num_targ_data: number of entries in target data
+ * @mask_app_bits: ignore these from raw application irq status
+ * @mask_dbg_bits: ignore these from raw debug irq status
+ */
+struct l3_flagmux_data {
+	u32 offset;
+	struct l3_target_data *l3_targ;
+	u8 num_targ_data;
+	u32 mask_app_bits;
+	u32 mask_dbg_bits;
+};
+
+
+/**
+ * struct omap_l3 - Description of data relevant for L3 bus.
+ * @dev:	device representing the bus (populated runtime)
+ * @l3_base:	base addresses of modules (populated runtime if 0)
+ *		if set to L3_BASE_IS_SUBMODULE, then uses previous
+ *		module index as the base address
+ * @l3_flag_mux: array containing flag mux data per module
+ *		 offset from corresponding module base indexed per
+ *		 module.
+ * @num_modules: number of clock domains / modules.
+ * @l3_masters:	array pointing to master data containing name and register
+ *		offset for the master.
+ * @num_master: number of masters
+ * @mst_addr_mask: Mask representing MSTADDR information of NTTP packet
+ * @debug_irq:	irq number of the debug interrupt (populated runtime)
+ * @app_irq:	irq number of the application interrupt (populated runtime)
+ */
+struct omap_l3 {
+	struct device *dev;
+
+	void __iomem *l3_base[MAX_L3_MODULES];
+	struct l3_flagmux_data **l3_flagmux;
+	int num_modules;
+
+	struct l3_masters_data *l3_masters;
+	int num_masters;
+	u32 mst_addr_mask;
+
+	int debug_irq;
+	int app_irq;
+};
+
+static struct l3_target_data omap_l3_target_data_clk1[] = {
+	{0x100,	"DMM1",},
+	{0x200,	"DMM2",},
+	{0x300,	"ABE",},
+	{0x400,	"L4CFG",},
+	{0x600,	"CLK2PWRDISC",},
+	{0x0,	"HOSTCLK1",},
+	{0x900,	"L4WAKEUP",},
+};
+
+static struct l3_flagmux_data omap_l3_flagmux_clk1 = {
+	.offset = 0x500,
+	.l3_targ = omap_l3_target_data_clk1,
+	.num_targ_data = ARRAY_SIZE(omap_l3_target_data_clk1),
+};
+
+
+static struct l3_target_data omap_l3_target_data_clk2[] = {
+	{0x500,	"CORTEXM3",},
+	{0x300,	"DSS",},
+	{0x100,	"GPMC",},
+	{0x400,	"ISS",},
+	{0x700,	"IVAHD",},
+	{0xD00,	"AES1",},
+	{0x900,	"L4PER0",},
+	{0x200,	"OCMRAM",},
+	{0x100,	"GPMCsERROR",},
+	{0x600,	"SGX",},
+	{0x800,	"SL2",},
+	{0x1600, "C2C",},
+	{0x1100, "PWRDISCCLK1",},
+	{0xF00,	"SHA1",},
+	{0xE00,	"AES2",},
+	{0xC00,	"L4PER3",},
+	{0xA00,	"L4PER1",},
+	{0xB00,	"L4PER2",},
+	{0x0,	"HOSTCLK2",},
+	{0x1800, "CAL",},
+	{0x1700, "LLI",},
+};
+
+static struct l3_flagmux_data omap_l3_flagmux_clk2 = {
+	.offset = 0x1000,
+	.l3_targ = omap_l3_target_data_clk2,
+	.num_targ_data = ARRAY_SIZE(omap_l3_target_data_clk2),
+};
+
+
+static struct l3_target_data omap_l3_target_data_clk3[] = {
+	{0x0100, "EMUSS",},
+	{0x0300, "DEBUG SOURCE",},
+	{0x0,	"HOST CLK3",},
+};
+
+static struct l3_flagmux_data omap_l3_flagmux_clk3 = {
+	.offset = 0x0200,
+	.l3_targ = omap_l3_target_data_clk3,
+	.num_targ_data = ARRAY_SIZE(omap_l3_target_data_clk3),
+};
+
+static struct l3_masters_data omap_l3_masters[] = {
 	{ 0x0 , "MPU"},
 	{ 0x10, "CS_ADP"},
 	{ 0x14, "xxx"},
@@ -117,60 +215,261 @@ static struct l3_masters_data {
 	{ 0xC8, "USBHOSTFS"}
 };
 
-static char *l3_targ_inst_name[L3_MODULES][21] = {
-	{
-		"DMM1",
-		"DMM2",
-		"ABE",
-		"L4CFG",
-		"CLK2 PWR DISC",
-		"HOST CLK1",
-		"L4 WAKEUP"
-	},
-	{
-		"CORTEX M3" ,
-		"DSS ",
-		"GPMC ",
-		"ISS ",
-		"IVAHD ",
-		"AES1",
-		"L4 PER0",
-		"OCMRAM ",
-		"GPMC sERROR",
-		"SGX ",
-		"SL2 ",
-		"C2C ",
-		"PWR DISC CLK1",
-		"SHA1",
-		"AES2",
-		"L4 PER3",
-		"L4 PER1",
-		"L4 PER2",
-		"HOST CLK2",
-		"CAL",
-		"LLI"
-	},
-	{
-		"EMUSS",
-		"DEBUG SOURCE",
-		"HOST CLK3"
-	},
-};
-
-static u32 *l3_targ[L3_MODULES] = {
-	l3_targ_inst_clk1,
-	l3_targ_inst_clk2,
-	l3_targ_inst_clk3,
-};
-
-struct omap4_l3 {
-	struct device *dev;
-	struct clk *ick;
+static struct l3_flagmux_data *omap_l3_flagmux[] = {
+	&omap_l3_flagmux_clk1,
+	&omap_l3_flagmux_clk2,
+	&omap_l3_flagmux_clk3,
+};
+
+static const struct omap_l3 omap_l3_data = {
+	.l3_flagmux = omap_l3_flagmux,
+	.num_modules = ARRAY_SIZE(omap_l3_flagmux),
+	.l3_masters = omap_l3_masters,
+	.num_masters = ARRAY_SIZE(omap_l3_masters),
+	/* The 6 MSBs of register field used to distinguish initiator */
+	.mst_addr_mask = 0xFC,
+};
 
-	/* memory base */
-	void __iomem *l3_base[L3_MODULES];
+/* DRA7 data */
+static struct l3_target_data dra_l3_target_data_clk1[] = {
+	{0x2a00, "AES1",},
+	{0x0200, "DMM_P1",},
+	{0x0600, "DSP2_SDMA",},
+	{0x0b00, "EVE2",},
+	{0x1300, "DMM_P2",},
+	{0x2c00, "AES2",},
+	{0x0300, "DSP1_SDMA",},
+	{0x0a00, "EVE1",},
+	{0x0c00, "EVE3",},
+	{0x0d00, "EVE4",},
+	{0x2900, "DSS",},
+	{0x0100, "GPMC",},
+	{0x3700, "PCIE1",},
+	{0x1600, "IVA_CONFIG",},
+	{0x1800, "IVA_SL2IF",},
+	{0x0500, "L4_CFG",},
+	{0x1d00, "L4_WKUP",},
+	{0x3800, "PCIE2",},
+	{0x3300, "SHA2_1",},
+	{0x1200, "GPU",},
+	{0x1000, "IPU1",},
+	{0x1100, "IPU2",},
+	{0x2000, "TPCC_EDMA",},
+	{0x2e00, "TPTC1_EDMA",},
+	{0x2b00, "TPTC2_EDMA",},
+	{0x0700, "VCP1",},
+	{0x2500, "L4_PER2_P3",},
+	{0x0e00, "L4_PER3_P3",},
+	{0x2200, "MMU1",},
+	{0x1400, "PRUSS1",},
+	{0x1500, "PRUSS2"},
+	{0x0800, "VCP1",},
+};
 
-	int debug_irq;
-	int app_irq;
+static struct l3_flagmux_data dra_l3_flagmux_clk1 = {
+	.offset = 0x803500,
+	.l3_targ = dra_l3_target_data_clk1,
+	.num_targ_data = ARRAY_SIZE(dra_l3_target_data_clk1),
+};
+
+static struct l3_target_data dra_l3_target_data_clk2[] = {
+	{0x0,	"HOST CLK1",},
+	{0x0,	"HOST CLK2",},
+	{0xdead, L3_TARGET_NOT_SUPPORTED,},
+	{0x3400, "SHA2_2",},
+	{0x0900, "BB2D",},
+	{0xdead, L3_TARGET_NOT_SUPPORTED,},
+	{0x2100, "L4_PER1_P3",},
+	{0x1c00, "L4_PER1_P1",},
+	{0x1f00, "L4_PER1_P2",},
+	{0x2300, "L4_PER2_P1",},
+	{0x2400, "L4_PER2_P2",},
+	{0x2600, "L4_PER3_P1",},
+	{0x2700, "L4_PER3_P2",},
+	{0x2f00, "MCASP1",},
+	{0x3000, "MCASP2",},
+	{0x3100, "MCASP3",},
+	{0x2800, "MMU2",},
+	{0x0f00, "OCMC_RAM1",},
+	{0x1700, "OCMC_RAM2",},
+	{0x1900, "OCMC_RAM3",},
+	{0x1e00, "OCMC_ROM",},
+	{0x3900, "QSPI",},
+};
+
+static struct l3_flagmux_data dra_l3_flagmux_clk2 = {
+	.offset = 0x803600,
+	.l3_targ = dra_l3_target_data_clk2,
+	.num_targ_data = ARRAY_SIZE(dra_l3_target_data_clk2),
+};
+
+static struct l3_target_data dra_l3_target_data_clk3[] = {
+	{0x0100, "L3_INSTR"},
+	{0x0300, "DEBUGSS_CT_TBR"},
+	{0x0,	 "HOST CLK3"},
+};
+
+static struct l3_flagmux_data dra_l3_flagmux_clk3 = {
+	.offset = 0x200,
+	.l3_targ = dra_l3_target_data_clk3,
+	.num_targ_data = ARRAY_SIZE(dra_l3_target_data_clk3),
+};
+
+static struct l3_masters_data dra_l3_masters[] = {
+	{ 0x0, "MPU" },
+	{ 0x4, "CS_DAP" },
+	{ 0x5, "IEEE1500_2_OCP" },
+	{ 0x8, "DSP1_MDMA" },
+	{ 0x9, "DSP1_CFG" },
+	{ 0xA, "DSP1_DMA" },
+	{ 0xB, "DSP2_MDMA" },
+	{ 0xC, "DSP2_CFG" },
+	{ 0xD, "DSP2_DMA" },
+	{ 0xE, "IVA" },
+	{ 0x10, "EVE1_P1" },
+	{ 0x11, "EVE2_P1" },
+	{ 0x12, "EVE3_P1" },
+	{ 0x13, "EVE4_P1" },
+	{ 0x14, "PRUSS1 PRU1" },
+	{ 0x15, "PRUSS1 PRU2" },
+	{ 0x16, "PRUSS2 PRU1" },
+	{ 0x17, "PRUSS2 PRU2" },
+	{ 0x18, "IPU1" },
+	{ 0x19, "IPU2" },
+	{ 0x1A, "SDMA" },
+	{ 0x1B, "CDMA" },
+	{ 0x1C, "TC1_EDMA" },
+	{ 0x1D, "TC2_EDMA" },
+	{ 0x20, "DSS" },
+	{ 0x21, "MMU1" },
+	{ 0x22, "PCIE1" },
+	{ 0x23, "MMU2" },
+	{ 0x24, "VIP1" },
+	{ 0x25, "VIP2" },
+	{ 0x26, "VIP3" },
+	{ 0x27, "VPE" },
+	{ 0x28, "GPU_P1" },
+	{ 0x29, "BB2D" },
+	{ 0x29, "GPU_P2" },
+	{ 0x2B, "GMAC_SW" },
+	{ 0x2C, "USB3" },
+	{ 0x2D, "USB2_SS" },
+	{ 0x2E, "USB2_ULPI_SS1" },
+	{ 0x2F, "USB2_ULPI_SS2" },
+	{ 0x30, "CSI2_1" },
+	{ 0x31, "CSI2_2" },
+	{ 0x33, "SATA" },
+	{ 0x34, "EVE1_P2" },
+	{ 0x35, "EVE2_P2" },
+	{ 0x36, "EVE3_P2" },
+	{ 0x37, "EVE4_P2" }
 };
-#endif
+
+static struct l3_flagmux_data *dra_l3_flagmux[] = {
+	&dra_l3_flagmux_clk1,
+	&dra_l3_flagmux_clk2,
+	&dra_l3_flagmux_clk3,
+};
+
+static const struct omap_l3 dra_l3_data = {
+	.l3_base = { [1] = L3_BASE_IS_SUBMODULE },
+	.l3_flagmux = dra_l3_flagmux,
+	.num_modules = ARRAY_SIZE(dra_l3_flagmux),
+	.l3_masters = dra_l3_masters,
+	.num_masters = ARRAY_SIZE(dra_l3_masters),
+	/* The 6 MSBs of register field used to distinguish initiator */
+	.mst_addr_mask = 0xFC,
+};
+
+/* AM4372 data */
+static struct l3_target_data am4372_l3_target_data_200f[] = {
+	{0xf00,  "EMIF",},
+	{0x1200, "DES",},
+	{0x400,  "OCMCRAM",},
+	{0x700,  "TPTC0",},
+	{0x800,  "TPTC1",},
+	{0x900,  "TPTC2"},
+	{0xb00,  "TPCC",},
+	{0xd00,  "DEBUGSS",},
+	{0xdead, L3_TARGET_NOT_SUPPORTED,},
+	{0x200,  "SHA",},
+	{0xc00,  "SGX530",},
+	{0x500,  "AES0",},
+	{0xa00,  "L4_FAST",},
+	{0x300,  "MPUSS_L2_RAM",},
+	{0x100,  "ICSS",},
+};
+
+static struct l3_flagmux_data am4372_l3_flagmux_200f = {
+	.offset = 0x1000,
+	.l3_targ = am4372_l3_target_data_200f,
+	.num_targ_data = ARRAY_SIZE(am4372_l3_target_data_200f),
+};
+
+static struct l3_target_data am4372_l3_target_data_100s[] = {
+	{0x100, "L4_PER_0",},
+	{0x200, "L4_PER_1",},
+	{0x300, "L4_PER_2",},
+	{0x400, "L4_PER_3",},
+	{0x800, "McASP0",},
+	{0x900, "McASP1",},
+	{0xC00, "MMCHS2",},
+	{0x700, "GPMC",},
+	{0xD00, "L4_FW",},
+	{0xdead, L3_TARGET_NOT_SUPPORTED,},
+	{0x500, "ADCTSC",},
+	{0xE00, "L4_WKUP",},
+	{0xA00, "MAG_CARD",},
+};
+
+static struct l3_flagmux_data am4372_l3_flagmux_100s = {
+	.offset = 0x600,
+	.l3_targ = am4372_l3_target_data_100s,
+	.num_targ_data = ARRAY_SIZE(am4372_l3_target_data_100s),
+};
+
+static struct l3_masters_data am4372_l3_masters[] = {
+	{ 0x0, "M1 (128-bit)"},
+	{ 0x1, "M2 (64-bit)"},
+	{ 0x4, "DAP"},
+	{ 0x5, "P1500"},
+	{ 0xC, "ICSS0"},
+	{ 0xD, "ICSS1"},
+	{ 0x14, "Wakeup Processor"},
+	{ 0x18, "TPTC0 Read"},
+	{ 0x19, "TPTC0 Write"},
+	{ 0x1A, "TPTC1 Read"},
+	{ 0x1B, "TPTC1 Write"},
+	{ 0x1C, "TPTC2 Read"},
+	{ 0x1D, "TPTC2 Write"},
+	{ 0x20, "SGX530"},
+	{ 0x21, "OCP WP Traffic Probe"},
+	{ 0x22, "OCP WP DMA Profiling"},
+	{ 0x23, "OCP WP Event Trace"},
+	{ 0x25, "DSS"},
+	{ 0x28, "Crypto DMA RD"},
+	{ 0x29, "Crypto DMA WR"},
+	{ 0x2C, "VPFE0"},
+	{ 0x2D, "VPFE1"},
+	{ 0x30, "GEMAC"},
+	{ 0x34, "USB0 RD"},
+	{ 0x35, "USB0 WR"},
+	{ 0x36, "USB1 RD"},
+	{ 0x37, "USB1 WR"},
+};
+
+static struct l3_flagmux_data *am4372_l3_flagmux[] = {
+	&am4372_l3_flagmux_200f,
+	&am4372_l3_flagmux_100s,
+};
+
+static const struct omap_l3 am4372_l3_data = {
+	.l3_flagmux = am4372_l3_flagmux,
+	.num_modules = ARRAY_SIZE(am4372_l3_flagmux),
+	.l3_masters = am4372_l3_masters,
+	.num_masters = ARRAY_SIZE(am4372_l3_masters),
+	/* All 6 bits of register field used to distinguish initiator */
+	.mst_addr_mask = 0x3F,
+};
+
+#endif	/* __OMAP_L3_NOC_H */
diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
index 870e18b9a687..1fad4c5e3f5d 100644
--- a/drivers/clk/samsung/clk-exynos5250.c
+++ b/drivers/clk/samsung/clk-exynos5250.c
@@ -24,6 +24,8 @@
 #define APLL_CON0		0x100
 #define SRC_CPU			0x200
 #define DIV_CPU0		0x500
+#define PWR_CTRL1		0x1020
+#define PWR_CTRL2		0x1024
 #define MPLL_LOCK		0x4000
 #define MPLL_CON0		0x4100
 #define SRC_CORE1		0x4204
@@ -84,6 +86,23 @@
 #define SRC_CDREX		0x20200
 #define PLL_DIV2_SEL		0x20a24
 
+/*Below definitions are used for PWR_CTRL settings*/
+#define PWR_CTRL1_CORE2_DOWN_RATIO		(7 << 28)
+#define PWR_CTRL1_CORE1_DOWN_RATIO		(7 << 16)
+#define PWR_CTRL1_DIV2_DOWN_EN			(1 << 9)
+#define PWR_CTRL1_DIV1_DOWN_EN			(1 << 8)
+#define PWR_CTRL1_USE_CORE1_WFE			(1 << 5)
+#define PWR_CTRL1_USE_CORE0_WFE			(1 << 4)
+#define PWR_CTRL1_USE_CORE1_WFI			(1 << 1)
+#define PWR_CTRL1_USE_CORE0_WFI			(1 << 0)
+
+#define PWR_CTRL2_DIV2_UP_EN			(1 << 25)
+#define PWR_CTRL2_DIV1_UP_EN			(1 << 24)
+#define PWR_CTRL2_DUR_STANDBY2_VAL		(1 << 16)
+#define PWR_CTRL2_DUR_STANDBY1_VAL		(1 << 8)
+#define PWR_CTRL2_CORE2_UP_RATIO		(1 << 4)
+#define PWR_CTRL2_CORE1_UP_RATIO		(1 << 0)
+
 /* list of PLLs to be registered */
 enum exynos5250_plls {
 	apll, mpll, cpll, epll, vpll, gpll, bpll,
@@ -102,6 +121,8 @@ static struct samsung_clk_reg_dump *exynos5250_save;
 static unsigned long exynos5250_clk_regs[] __initdata = {
 	SRC_CPU,
 	DIV_CPU0,
+	PWR_CTRL1,
+	PWR_CTRL2,
 	SRC_CORE1,
 	SRC_TOP0,
 	SRC_TOP1,
@@ -736,6 +757,7 @@ static struct of_device_id ext_clk_match[] __initdata = {
 static void __init exynos5250_clk_init(struct device_node *np)
 {
 	struct samsung_clk_provider *ctx;
+	unsigned int tmp;
 
 	if (np) {
 		reg_base = of_iomap(np, 0);
@@ -776,6 +798,26 @@ static void __init exynos5250_clk_init(struct device_node *np)
 	samsung_clk_register_gate(ctx, exynos5250_gate_clks,
 			ARRAY_SIZE(exynos5250_gate_clks));
 
+	/*
+	 * Enable arm clock down (in idle) and set arm divider
+	 * ratios in WFI/WFE state.
+	 */
+	tmp = (PWR_CTRL1_CORE2_DOWN_RATIO | PWR_CTRL1_CORE1_DOWN_RATIO |
+		PWR_CTRL1_DIV2_DOWN_EN | PWR_CTRL1_DIV1_DOWN_EN |
+		PWR_CTRL1_USE_CORE1_WFE | PWR_CTRL1_USE_CORE0_WFE |
+		PWR_CTRL1_USE_CORE1_WFI | PWR_CTRL1_USE_CORE0_WFI);
+	__raw_writel(tmp, reg_base + PWR_CTRL1);
+
+	/*
+	 * Enable arm clock up (on exiting idle). Set arm divider
+	 * ratios when not in idle along with the standby duration
+	 * ratios.
+	 */
+	tmp = (PWR_CTRL2_DIV2_UP_EN | PWR_CTRL2_DIV1_UP_EN |
+		PWR_CTRL2_DUR_STANDBY2_VAL | PWR_CTRL2_DUR_STANDBY1_VAL |
+		PWR_CTRL2_CORE2_UP_RATIO | PWR_CTRL2_CORE1_UP_RATIO);
+	__raw_writel(tmp, reg_base + PWR_CTRL2);
+
 	exynos5250_clk_sleep_init();
 
 	pr_info("Exynos5250: clock setup completed, armclk=%ld\n",
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index acf5a329d538..8d6420013a04 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -24,6 +24,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/clocksource.h>
+#include <linux/sched_clock.h>
 
 #define EXYNOS4_MCTREG(x)		(x)
 #define EXYNOS4_MCT_G_CNT_L		EXYNOS4_MCTREG(0x100)
@@ -192,12 +193,19 @@ struct clocksource mct_frc = {
 	.resume		= exynos4_frc_resume,
 };
 
+static u64 notrace exynos4_read_sched_clock(void)
+{
+	return exynos4_frc_read(&mct_frc);
+}
+
 static void __init exynos4_clocksource_init(void)
 {
 	exynos4_mct_frc_start(0, 0);
 
 	if (clocksource_register_hz(&mct_frc, clk_rate))
 		panic("%s: can't register clocksource\n", mct_frc.name);
+
+	sched_clock_register(exynos4_read_sched_clock, 64, clk_rate);
 }
 
 static void exynos4_mct_comp0_stop(void)
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 580503513f0f..d2c7b4b8ffd5 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -30,7 +30,7 @@ config ARM_EXYNOS_CPUFREQ
 
 config ARM_EXYNOS4210_CPUFREQ
 	bool "SAMSUNG EXYNOS4210"
-	depends on CPU_EXYNOS4210 && !ARCH_MULTIPLATFORM
+	depends on CPU_EXYNOS4210
 	default y
 	select ARM_EXYNOS_CPUFREQ
 	help
@@ -41,7 +41,7 @@ config ARM_EXYNOS4210_CPUFREQ
 
 config ARM_EXYNOS4X12_CPUFREQ
 	bool "SAMSUNG EXYNOS4x12"
-	depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412) && !ARCH_MULTIPLATFORM
+	depends on SOC_EXYNOS4212 || SOC_EXYNOS4412
 	default y
 	select ARM_EXYNOS_CPUFREQ
 	help
@@ -52,7 +52,7 @@ config ARM_EXYNOS4X12_CPUFREQ
 
 config ARM_EXYNOS5250_CPUFREQ
 	bool "SAMSUNG EXYNOS5250"
-	depends on SOC_EXYNOS5250 && !ARCH_MULTIPLATFORM
+	depends on SOC_EXYNOS5250
 	default y
 	select ARM_EXYNOS_CPUFREQ
 	help
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index e8a4a7ed38c1..348c8bafe436 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -19,8 +19,6 @@
 #include <linux/platform_device.h>
 #include <linux/of.h>
 
-#include <plat/cpu.h>
-
 #include "exynos-cpufreq.h"
 
 static struct exynos_dvfs_info *exynos_info;
diff --git a/drivers/cpufreq/exynos-cpufreq.h b/drivers/cpufreq/exynos-cpufreq.h
index f189547bb447..51af42e1b7fe 100644
--- a/drivers/cpufreq/exynos-cpufreq.h
+++ b/drivers/cpufreq/exynos-cpufreq.h
@@ -49,6 +49,7 @@ struct exynos_dvfs_info {
 	struct cpufreq_frequency_table	*freq_table;
 	void (*set_freq)(unsigned int, unsigned int);
 	bool (*need_apll_change)(unsigned int, unsigned int);
+	void __iomem	*cmu_regs;
 };
 
 #ifdef CONFIG_ARM_EXYNOS4210_CPUFREQ
@@ -76,24 +77,21 @@ static inline int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
 }
 #endif
 
-#include <plat/cpu.h>
-#include <mach/map.h>
+#define EXYNOS4_CLKSRC_CPU			0x14200
+#define EXYNOS4_CLKMUX_STATCPU			0x14400
 
-#define EXYNOS4_CLKSRC_CPU			(S5P_VA_CMU + 0x14200)
-#define EXYNOS4_CLKMUX_STATCPU			(S5P_VA_CMU + 0x14400)
-
-#define EXYNOS4_CLKDIV_CPU			(S5P_VA_CMU + 0x14500)
-#define EXYNOS4_CLKDIV_CPU1			(S5P_VA_CMU + 0x14504)
-#define EXYNOS4_CLKDIV_STATCPU			(S5P_VA_CMU + 0x14600)
-#define EXYNOS4_CLKDIV_STATCPU1			(S5P_VA_CMU + 0x14604)
+#define EXYNOS4_CLKDIV_CPU			0x14500
+#define EXYNOS4_CLKDIV_CPU1			0x14504
+#define EXYNOS4_CLKDIV_STATCPU			0x14600
+#define EXYNOS4_CLKDIV_STATCPU1			0x14604
 
 #define EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT	(16)
 #define EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK	(0x7 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)
 
-#define EXYNOS5_APLL_LOCK			(S5P_VA_CMU + 0x00000)
-#define EXYNOS5_APLL_CON0			(S5P_VA_CMU + 0x00100)
-#define EXYNOS5_CLKMUX_STATCPU			(S5P_VA_CMU + 0x00400)
-#define EXYNOS5_CLKDIV_CPU0			(S5P_VA_CMU + 0x00500)
-#define EXYNOS5_CLKDIV_CPU1			(S5P_VA_CMU + 0x00504)
-#define EXYNOS5_CLKDIV_STATCPU0			(S5P_VA_CMU + 0x00600)
-#define EXYNOS5_CLKDIV_STATCPU1			(S5P_VA_CMU + 0x00604)
+#define EXYNOS5_APLL_LOCK			0x00000
+#define EXYNOS5_APLL_CON0			0x00100
+#define EXYNOS5_CLKMUX_STATCPU			0x00400
+#define EXYNOS5_CLKDIV_CPU0			0x00500
+#define EXYNOS5_CLKDIV_CPU1			0x00504
+#define EXYNOS5_CLKDIV_STATCPU0			0x00600
+#define EXYNOS5_CLKDIV_STATCPU1			0x00604
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
index 6384e5b9a347..61a54310a1b9 100644
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ b/drivers/cpufreq/exynos4210-cpufreq.c
@@ -16,6 +16,8 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/cpufreq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include "exynos-cpufreq.h"
 
@@ -23,6 +25,7 @@ static struct clk *cpu_clk;
 static struct clk *moutcore;
 static struct clk *mout_mpll;
 static struct clk *mout_apll;
+static struct exynos_dvfs_info *cpufreq;
 
 static unsigned int exynos4210_volt_table[] = {
 	1250000, 1150000, 1050000, 975000, 950000,
@@ -60,20 +63,20 @@ static void exynos4210_set_clkdiv(unsigned int div_index)
 
 	tmp = apll_freq_4210[div_index].clk_div_cpu0;
 
-	__raw_writel(tmp, EXYNOS4_CLKDIV_CPU);
+	__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU);
 
 	do {
-		tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU);
+		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU);
 	} while (tmp & 0x1111111);
 
 	/* Change Divider - CPU1 */
 
 	tmp = apll_freq_4210[div_index].clk_div_cpu1;
 
-	__raw_writel(tmp, EXYNOS4_CLKDIV_CPU1);
+	__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU1);
 
 	do {
-		tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU1);
+		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU1);
 	} while (tmp & 0x11);
 }
 
@@ -85,7 +88,7 @@ static void exynos4210_set_apll(unsigned int index)
 	clk_set_parent(moutcore, mout_mpll);
 
 	do {
-		tmp = (__raw_readl(EXYNOS4_CLKMUX_STATCPU)
+		tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU)
 			>> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT);
 		tmp &= 0x7;
 	} while (tmp != 0x2);
@@ -96,7 +99,7 @@ static void exynos4210_set_apll(unsigned int index)
 	clk_set_parent(moutcore, mout_apll);
 
 	do {
-		tmp = __raw_readl(EXYNOS4_CLKMUX_STATCPU);
+		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU);
 		tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK;
 	} while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
 }
@@ -115,8 +118,30 @@ static void exynos4210_set_frequency(unsigned int old_index,
 
 int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
 {
+	struct device_node *np;
 	unsigned long rate;
 
+	/*
+	 * HACK: This is a temporary workaround to get access to clock
+	 * controller registers directly and remove static mappings and
+	 * dependencies on platform headers. It is necessary to enable
+	 * Exynos multi-platform support and will be removed together with
+	 * this whole driver as soon as Exynos gets migrated to use
+	 * cpufreq-cpu0 driver.
+	 */
+	np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-clock");
+	if (!np) {
+		pr_err("%s: failed to find clock controller DT node\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	info->cmu_regs = of_iomap(np, 0);
+	if (!info->cmu_regs) {
+		pr_err("%s: failed to map CMU registers\n", __func__);
+		return -EFAULT;
+	}
+
 	cpu_clk = clk_get(NULL, "armclk");
 	if (IS_ERR(cpu_clk))
 		return PTR_ERR(cpu_clk);
@@ -143,6 +168,8 @@ int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
 	info->freq_table = exynos4210_freq_table;
 	info->set_freq = exynos4210_set_frequency;
 
+	cpufreq = info;
+
 	return 0;
 
 err_mout_apll:
diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c
index 63a3907ce578..351a2074cfea 100644
--- a/drivers/cpufreq/exynos4x12-cpufreq.c
+++ b/drivers/cpufreq/exynos4x12-cpufreq.c
@@ -16,6 +16,8 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/cpufreq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include "exynos-cpufreq.h"
 
@@ -23,6 +25,7 @@ static struct clk *cpu_clk;
 static struct clk *moutcore;
 static struct clk *mout_mpll;
 static struct clk *mout_apll;
+static struct exynos_dvfs_info *cpufreq;
 
 static unsigned int exynos4x12_volt_table[] = {
 	1350000, 1287500, 1250000, 1187500, 1137500, 1087500, 1037500,
@@ -105,19 +108,20 @@ static void exynos4x12_set_clkdiv(unsigned int div_index)
 
 	tmp = apll_freq_4x12[div_index].clk_div_cpu0;
 
-	__raw_writel(tmp, EXYNOS4_CLKDIV_CPU);
+	__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU);
 
-	while (__raw_readl(EXYNOS4_CLKDIV_STATCPU) & 0x11111111)
+	while (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU)
+	       & 0x11111111)
 		cpu_relax();
 
 	/* Change Divider - CPU1 */
 	tmp = apll_freq_4x12[div_index].clk_div_cpu1;
 
-	__raw_writel(tmp, EXYNOS4_CLKDIV_CPU1);
+	__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU1);
 
 	do {
 		cpu_relax();
-		tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU1);
+		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU1);
 	} while (tmp != 0x0);
 }
 
@@ -130,7 +134,7 @@ static void exynos4x12_set_apll(unsigned int index)
 
 	do {
 		cpu_relax();
-		tmp = (__raw_readl(EXYNOS4_CLKMUX_STATCPU)
+		tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU)
 			>> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT);
 		tmp &= 0x7;
 	} while (tmp != 0x2);
@@ -142,7 +146,7 @@ static void exynos4x12_set_apll(unsigned int index)
 
 	do {
 		cpu_relax();
-		tmp = __raw_readl(EXYNOS4_CLKMUX_STATCPU);
+		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU);
 		tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK;
 	} while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
 }
@@ -161,8 +165,30 @@ static void exynos4x12_set_frequency(unsigned int old_index,
 
 int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
 {
+	struct device_node *np;
 	unsigned long rate;
 
+	/*
+	 * HACK: This is a temporary workaround to get access to clock
+	 * controller registers directly and remove static mappings and
+	 * dependencies on platform headers. It is necessary to enable
+	 * Exynos multi-platform support and will be removed together with
+	 * this whole driver as soon as Exynos gets migrated to use
+	 * cpufreq-cpu0 driver.
+	 */
+	np = of_find_compatible_node(NULL, NULL, "samsung,exynos4412-clock");
+	if (!np) {
+		pr_err("%s: failed to find clock controller DT node\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	info->cmu_regs = of_iomap(np, 0);
+	if (!info->cmu_regs) {
+		pr_err("%s: failed to map CMU registers\n", __func__);
+		return -EFAULT;
+	}
+
 	cpu_clk = clk_get(NULL, "armclk");
 	if (IS_ERR(cpu_clk))
 		return PTR_ERR(cpu_clk);
@@ -194,6 +220,8 @@ int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
 	info->freq_table = exynos4x12_freq_table;
 	info->set_freq = exynos4x12_set_frequency;
 
+	cpufreq = info;
+
 	return 0;
 
 err_mout_apll:
diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c
index 363a0b3fe1b1..c91ce69dc631 100644
--- a/drivers/cpufreq/exynos5250-cpufreq.c
+++ b/drivers/cpufreq/exynos5250-cpufreq.c
@@ -16,8 +16,8 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/cpufreq.h>
-
-#include <mach/map.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include "exynos-cpufreq.h"
 
@@ -25,6 +25,7 @@ static struct clk *cpu_clk;
 static struct clk *moutcore;
 static struct clk *mout_mpll;
 static struct clk *mout_apll;
+static struct exynos_dvfs_info *cpufreq;
 
 static unsigned int exynos5250_volt_table[] = {
 	1300000, 1250000, 1225000, 1200000, 1150000,
@@ -87,17 +88,18 @@ static void set_clkdiv(unsigned int div_index)
 
 	tmp = apll_freq_5250[div_index].clk_div_cpu0;
 
-	__raw_writel(tmp, EXYNOS5_CLKDIV_CPU0);
+	__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU0);
 
-	while (__raw_readl(EXYNOS5_CLKDIV_STATCPU0) & 0x11111111)
+	while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU0)
+	       & 0x11111111)
 		cpu_relax();
 
 	/* Change Divider - CPU1 */
 	tmp = apll_freq_5250[div_index].clk_div_cpu1;
 
-	__raw_writel(tmp, EXYNOS5_CLKDIV_CPU1);
+	__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU1);
 
-	while (__raw_readl(EXYNOS5_CLKDIV_STATCPU1) & 0x11)
+	while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU1) & 0x11)
 		cpu_relax();
 }
 
@@ -111,7 +113,8 @@ static void set_apll(unsigned int index)
 
 	do {
 		cpu_relax();
-		tmp = (__raw_readl(EXYNOS5_CLKMUX_STATCPU) >> 16);
+		tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU)
+			>> 16);
 		tmp &= 0x7;
 	} while (tmp != 0x2);
 
@@ -122,7 +125,7 @@ static void set_apll(unsigned int index)
 
 	do {
 		cpu_relax();
-		tmp = __raw_readl(EXYNOS5_CLKMUX_STATCPU);
+		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU);
 		tmp &= (0x7 << 16);
 	} while (tmp != (0x1 << 16));
 }
@@ -141,8 +144,30 @@ static void exynos5250_set_frequency(unsigned int old_index,
 
 int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
 {
+	struct device_node *np;
 	unsigned long rate;
 
+	/*
+	 * HACK: This is a temporary workaround to get access to clock
+	 * controller registers directly and remove static mappings and
+	 * dependencies on platform headers. It is necessary to enable
+	 * Exynos multi-platform support and will be removed together with
+	 * this whole driver as soon as Exynos gets migrated to use
+	 * cpufreq-cpu0 driver.
+	 */
+	np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-clock");
+	if (!np) {
+		pr_err("%s: failed to find clock controller DT node\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	info->cmu_regs = of_iomap(np, 0);
+	if (!info->cmu_regs) {
+		pr_err("%s: failed to map CMU registers\n", __func__);
+		return -EFAULT;
+	}
+
 	cpu_clk = clk_get(NULL, "armclk");
 	if (IS_ERR(cpu_clk))
 		return PTR_ERR(cpu_clk);
@@ -169,6 +194,8 @@ int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
 	info->freq_table = exynos5250_freq_table;
 	info->set_freq = exynos5250_set_frequency;
 
+	cpufreq = info;
+
 	return 0;
 
 err_mout_apll:
diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
index 5bb94780d377..ae1d78ea7df7 100644
--- a/drivers/cpuidle/Kconfig.arm
+++ b/drivers/cpuidle/Kconfig.arm
@@ -49,3 +49,9 @@ config ARM_AT91_CPUIDLE
 	depends on ARCH_AT91
 	help
 	  Select this to enable cpuidle for AT91 processors
+
+config ARM_EXYNOS_CPUIDLE
+	bool "Cpu Idle Driver for the Exynos processors"
+	depends on ARCH_EXYNOS
+	help
+	  Select this to enable cpuidle for Exynos processors
diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
index 9902d052bd87..cd3ab59f8461 100644
--- a/drivers/cpuidle/Makefile
+++ b/drivers/cpuidle/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_ARM_KIRKWOOD_CPUIDLE)	+= cpuidle-kirkwood.o
 obj-$(CONFIG_ARM_ZYNQ_CPUIDLE)		+= cpuidle-zynq.o
 obj-$(CONFIG_ARM_U8500_CPUIDLE)         += cpuidle-ux500.o
 obj-$(CONFIG_ARM_AT91_CPUIDLE)          += cpuidle-at91.o
+obj-$(CONFIG_ARM_EXYNOS_CPUIDLE)        += cpuidle-exynos.o
 
 ###############################################################################
 # POWERPC drivers
diff --git a/drivers/cpuidle/cpuidle-exynos.c b/drivers/cpuidle/cpuidle-exynos.c
new file mode 100644
index 000000000000..7c0151263828
--- /dev/null
+++ b/drivers/cpuidle/cpuidle-exynos.c
@@ -0,0 +1,99 @@
+/* linux/arch/arm/mach-exynos/cpuidle.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/cpuidle.h>
+#include <linux/cpu_pm.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/proc-fns.h>
+#include <asm/suspend.h>
+#include <asm/cpuidle.h>
+
+static void (*exynos_enter_aftr)(void);
+
+static int idle_finisher(unsigned long flags)
+{
+	exynos_enter_aftr();
+	cpu_do_idle();
+
+	return 1;
+}
+
+static int exynos_enter_core0_aftr(struct cpuidle_device *dev,
+				struct cpuidle_driver *drv,
+				int index)
+{
+	cpu_pm_enter();
+	cpu_suspend(0, idle_finisher);
+	cpu_pm_exit();
+
+	return index;
+}
+
+static int exynos_enter_lowpower(struct cpuidle_device *dev,
+				struct cpuidle_driver *drv,
+				int index)
+{
+	int new_index = index;
+
+	/* AFTR can only be entered when cores other than CPU0 are offline */
+	if (num_online_cpus() > 1 || dev->cpu != 0)
+		new_index = drv->safe_state_index;
+
+	if (new_index == 0)
+		return arm_cpuidle_simple_enter(dev, drv, new_index);
+	else
+		return exynos_enter_core0_aftr(dev, drv, new_index);
+}
+
+static struct cpuidle_driver exynos_idle_driver = {
+	.name			= "exynos_idle",
+	.owner			= THIS_MODULE,
+	.states = {
+		[0] = ARM_CPUIDLE_WFI_STATE,
+		[1] = {
+			.enter			= exynos_enter_lowpower,
+			.exit_latency		= 300,
+			.target_residency	= 100000,
+			.flags			= CPUIDLE_FLAG_TIME_VALID,
+			.name			= "C1",
+			.desc			= "ARM power down",
+		},
+	},
+	.state_count = 2,
+	.safe_state_index = 0,
+};
+
+static int exynos_cpuidle_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	exynos_enter_aftr = (void *)(pdev->dev.platform_data);
+
+	ret = cpuidle_register(&exynos_idle_driver, NULL);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register cpuidle driver\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct platform_driver exynos_cpuidle_driver = {
+	.probe	= exynos_cpuidle_probe,
+	.driver = {
+		.name = "exynos_cpuidle",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(exynos_cpuidle_driver);
diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index 926360c2db6a..d08c4dedef35 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -57,14 +57,48 @@
 #define EDMA_MAX_SLOTS		MAX_NR_SG
 #define EDMA_DESCRIPTORS	16
 
+struct edma_pset {
+	u32				len;
+	dma_addr_t			addr;
+	struct edmacc_param		param;
+};
+
 struct edma_desc {
 	struct virt_dma_desc		vdesc;
 	struct list_head		node;
+	enum dma_transfer_direction	direction;
 	int				cyclic;
 	int				absync;
 	int				pset_nr;
+	struct edma_chan		*echan;
 	int				processed;
-	struct edmacc_param		pset[0];
+
+	/*
+	 * The following 4 elements are used for residue accounting.
+	 *
+	 * - processed_stat: the number of SG elements we have traversed
+	 * so far to cover accounting. This is updated directly to processed
+	 * during edma_callback and is always <= processed, because processed
+	 * refers to the number of pending transfer (programmed to EDMA
+	 * controller), where as processed_stat tracks number of transfers
+	 * accounted for so far.
+	 *
+	 * - residue: The amount of bytes we have left to transfer for this desc
+	 *
+	 * - residue_stat: The residue in bytes of data we have covered
+	 * so far for accounting. This is updated directly to residue
+	 * during callbacks to keep it current.
+	 *
+	 * - sg_len: Tracks the length of the current intermediate transfer,
+	 * this is required to update the residue during intermediate transfer
+	 * completion callback.
+	 */
+	int				processed_stat;
+	u32				sg_len;
+	u32				residue;
+	u32				residue_stat;
+
+	struct edma_pset		pset[0];
 };
 
 struct edma_cc;
@@ -136,12 +170,14 @@ static void edma_execute(struct edma_chan *echan)
 	/* Find out how many left */
 	left = edesc->pset_nr - edesc->processed;
 	nslots = min(MAX_NR_SG, left);
+	edesc->sg_len = 0;
 
 	/* Write descriptor PaRAM set(s) */
 	for (i = 0; i < nslots; i++) {
 		j = i + edesc->processed;
-		edma_write_slot(echan->slot[i], &edesc->pset[j]);
-		dev_dbg(echan->vchan.chan.device->dev,
+		edma_write_slot(echan->slot[i], &edesc->pset[j].param);
+		edesc->sg_len += edesc->pset[j].len;
+		dev_vdbg(echan->vchan.chan.device->dev,
 			"\n pset[%d]:\n"
 			"  chnum\t%d\n"
 			"  slot\t%d\n"
@@ -154,14 +190,14 @@ static void edma_execute(struct edma_chan *echan)
 			"  cidx\t%08x\n"
 			"  lkrld\t%08x\n",
 			j, echan->ch_num, echan->slot[i],
-			edesc->pset[j].opt,
-			edesc->pset[j].src,
-			edesc->pset[j].dst,
-			edesc->pset[j].a_b_cnt,
-			edesc->pset[j].ccnt,
-			edesc->pset[j].src_dst_bidx,
-			edesc->pset[j].src_dst_cidx,
-			edesc->pset[j].link_bcntrld);
+			edesc->pset[j].param.opt,
+			edesc->pset[j].param.src,
+			edesc->pset[j].param.dst,
+			edesc->pset[j].param.a_b_cnt,
+			edesc->pset[j].param.ccnt,
+			edesc->pset[j].param.src_dst_bidx,
+			edesc->pset[j].param.src_dst_cidx,
+			edesc->pset[j].param.link_bcntrld);
 		/* Link to the previous slot if not the last set */
 		if (i != (nslots - 1))
 			edma_link(echan->slot[i], echan->slot[i+1]);
@@ -183,7 +219,8 @@ static void edma_execute(struct edma_chan *echan)
 	}
 
 	if (edesc->processed <= MAX_NR_SG) {
-		dev_dbg(dev, "first transfer starting %d\n", echan->ch_num);
+		dev_dbg(dev, "first transfer starting on channel %d\n",
+			echan->ch_num);
 		edma_start(echan->ch_num);
 	} else {
 		dev_dbg(dev, "chan: %d: completed %d elements, resuming\n",
@@ -197,7 +234,7 @@ static void edma_execute(struct edma_chan *echan)
 	 * MAX_NR_SG
 	 */
 	if (echan->missed) {
-		dev_dbg(dev, "missed event in execute detected\n");
+		dev_dbg(dev, "missed event on channel %d\n", echan->ch_num);
 		edma_clean_channel(echan->ch_num);
 		edma_stop(echan->ch_num);
 		edma_start(echan->ch_num);
@@ -242,6 +279,26 @@ static int edma_slave_config(struct edma_chan *echan,
 	return 0;
 }
 
+static int edma_dma_pause(struct edma_chan *echan)
+{
+	/* Pause/Resume only allowed with cyclic mode */
+	if (!echan->edesc->cyclic)
+		return -EINVAL;
+
+	edma_pause(echan->ch_num);
+	return 0;
+}
+
+static int edma_dma_resume(struct edma_chan *echan)
+{
+	/* Pause/Resume only allowed with cyclic mode */
+	if (!echan->edesc->cyclic)
+		return -EINVAL;
+
+	edma_resume(echan->ch_num);
+	return 0;
+}
+
 static int edma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
 			unsigned long arg)
 {
@@ -257,6 +314,14 @@ static int edma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
 		config = (struct dma_slave_config *)arg;
 		ret = edma_slave_config(echan, config);
 		break;
+	case DMA_PAUSE:
+		ret = edma_dma_pause(echan);
+		break;
+
+	case DMA_RESUME:
+		ret = edma_dma_resume(echan);
+		break;
+
 	default:
 		ret = -ENOSYS;
 	}
@@ -275,18 +340,23 @@ static int edma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
  * @dma_length: Total length of the DMA transfer
  * @direction: Direction of the transfer
  */
-static int edma_config_pset(struct dma_chan *chan, struct edmacc_param *pset,
+static int edma_config_pset(struct dma_chan *chan, struct edma_pset *epset,
 	dma_addr_t src_addr, dma_addr_t dst_addr, u32 burst,
 	enum dma_slave_buswidth dev_width, unsigned int dma_length,
 	enum dma_transfer_direction direction)
 {
 	struct edma_chan *echan = to_edma_chan(chan);
 	struct device *dev = chan->device->dev;
+	struct edmacc_param *param = &epset->param;
 	int acnt, bcnt, ccnt, cidx;
 	int src_bidx, dst_bidx, src_cidx, dst_cidx;
 	int absync;
 
 	acnt = dev_width;
+
+	/* src/dst_maxburst == 0 is the same case as src/dst_maxburst == 1 */
+	if (!burst)
+		burst = 1;
 	/*
 	 * If the maxburst is equal to the fifo width, use
 	 * A-synced transfers. This allows for large contiguous
@@ -337,41 +407,50 @@ static int edma_config_pset(struct dma_chan *chan, struct edmacc_param *pset,
 		cidx = acnt * bcnt;
 	}
 
+	epset->len = dma_length;
+
 	if (direction == DMA_MEM_TO_DEV) {
 		src_bidx = acnt;
 		src_cidx = cidx;
 		dst_bidx = 0;
 		dst_cidx = 0;
+		epset->addr = src_addr;
 	} else if (direction == DMA_DEV_TO_MEM)  {
 		src_bidx = 0;
 		src_cidx = 0;
 		dst_bidx = acnt;
 		dst_cidx = cidx;
+		epset->addr = dst_addr;
+	} else if (direction == DMA_MEM_TO_MEM)  {
+		src_bidx = acnt;
+		src_cidx = cidx;
+		dst_bidx = acnt;
+		dst_cidx = cidx;
 	} else {
 		dev_err(dev, "%s: direction not implemented yet\n", __func__);
 		return -EINVAL;
 	}
 
-	pset->opt = EDMA_TCC(EDMA_CHAN_SLOT(echan->ch_num));
+	param->opt = EDMA_TCC(EDMA_CHAN_SLOT(echan->ch_num));
 	/* Configure A or AB synchronized transfers */
 	if (absync)
-		pset->opt |= SYNCDIM;
+		param->opt |= SYNCDIM;
 
-	pset->src = src_addr;
-	pset->dst = dst_addr;
+	param->src = src_addr;
+	param->dst = dst_addr;
 
-	pset->src_dst_bidx = (dst_bidx << 16) | src_bidx;
-	pset->src_dst_cidx = (dst_cidx << 16) | src_cidx;
+	param->src_dst_bidx = (dst_bidx << 16) | src_bidx;
+	param->src_dst_cidx = (dst_cidx << 16) | src_cidx;
 
-	pset->a_b_cnt = bcnt << 16 | acnt;
-	pset->ccnt = ccnt;
+	param->a_b_cnt = bcnt << 16 | acnt;
+	param->ccnt = ccnt;
 	/*
 	 * Only time when (bcntrld) auto reload is required is for
 	 * A-sync case, and in this case, a requirement of reload value
 	 * of SZ_64K-1 only is assured. 'link' is initially set to NULL
 	 * and then later will be populated by edma_execute.
 	 */
-	pset->link_bcntrld = 0xffffffff;
+	param->link_bcntrld = 0xffffffff;
 	return absync;
 }
 
@@ -401,23 +480,26 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg(
 		dev_width = echan->cfg.dst_addr_width;
 		burst = echan->cfg.dst_maxburst;
 	} else {
-		dev_err(dev, "%s: bad direction?\n", __func__);
+		dev_err(dev, "%s: bad direction: %d\n", __func__, direction);
 		return NULL;
 	}
 
 	if (dev_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) {
-		dev_err(dev, "Undefined slave buswidth\n");
+		dev_err(dev, "%s: Undefined slave buswidth\n", __func__);
 		return NULL;
 	}
 
 	edesc = kzalloc(sizeof(*edesc) + sg_len *
 		sizeof(edesc->pset[0]), GFP_ATOMIC);
 	if (!edesc) {
-		dev_dbg(dev, "Failed to allocate a descriptor\n");
+		dev_err(dev, "%s: Failed to allocate a descriptor\n", __func__);
 		return NULL;
 	}
 
 	edesc->pset_nr = sg_len;
+	edesc->residue = 0;
+	edesc->direction = direction;
+	edesc->echan = echan;
 
 	/* Allocate a PaRAM slot, if needed */
 	nslots = min_t(unsigned, MAX_NR_SG, sg_len);
@@ -429,7 +511,8 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg(
 						EDMA_SLOT_ANY);
 			if (echan->slot[i] < 0) {
 				kfree(edesc);
-				dev_err(dev, "Failed to allocate slot\n");
+				dev_err(dev, "%s: Failed to allocate slot\n",
+					__func__);
 				return NULL;
 			}
 		}
@@ -452,16 +535,56 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg(
 		}
 
 		edesc->absync = ret;
+		edesc->residue += sg_dma_len(sg);
 
 		/* If this is the last in a current SG set of transactions,
 		   enable interrupts so that next set is processed */
 		if (!((i+1) % MAX_NR_SG))
-			edesc->pset[i].opt |= TCINTEN;
+			edesc->pset[i].param.opt |= TCINTEN;
 
 		/* If this is the last set, enable completion interrupt flag */
 		if (i == sg_len - 1)
-			edesc->pset[i].opt |= TCINTEN;
+			edesc->pset[i].param.opt |= TCINTEN;
 	}
+	edesc->residue_stat = edesc->residue;
+
+	return vchan_tx_prep(&echan->vchan, &edesc->vdesc, tx_flags);
+}
+
+struct dma_async_tx_descriptor *edma_prep_dma_memcpy(
+	struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+	size_t len, unsigned long tx_flags)
+{
+	int ret;
+	struct edma_desc *edesc;
+	struct device *dev = chan->device->dev;
+	struct edma_chan *echan = to_edma_chan(chan);
+
+	if (unlikely(!echan || !len))
+		return NULL;
+
+	edesc = kzalloc(sizeof(*edesc) + sizeof(edesc->pset[0]), GFP_ATOMIC);
+	if (!edesc) {
+		dev_dbg(dev, "Failed to allocate a descriptor\n");
+		return NULL;
+	}
+
+	edesc->pset_nr = 1;
+
+	ret = edma_config_pset(chan, &edesc->pset[0], src, dest, 1,
+			       DMA_SLAVE_BUSWIDTH_4_BYTES, len, DMA_MEM_TO_MEM);
+	if (ret < 0)
+		return NULL;
+
+	edesc->absync = ret;
+
+	/*
+	 * Enable intermediate transfer chaining to re-trigger channel
+	 * on completion of every TR, and enable transfer-completion
+	 * interrupt on completion of the whole transfer.
+	 */
+	edesc->pset[0].param.opt |= ITCCHEN;
+	edesc->pset[0].param.opt |= TCINTEN;
 
 	return vchan_tx_prep(&echan->vchan, &edesc->vdesc, tx_flags);
 }
@@ -493,12 +616,12 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
 		dev_width = echan->cfg.dst_addr_width;
 		burst = echan->cfg.dst_maxburst;
 	} else {
-		dev_err(dev, "%s: bad direction?\n", __func__);
+		dev_err(dev, "%s: bad direction: %d\n", __func__, direction);
 		return NULL;
 	}
 
 	if (dev_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) {
-		dev_err(dev, "Undefined slave buswidth\n");
+		dev_err(dev, "%s: Undefined slave buswidth\n", __func__);
 		return NULL;
 	}
 
@@ -523,16 +646,18 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
 	edesc = kzalloc(sizeof(*edesc) + nslots *
 		sizeof(edesc->pset[0]), GFP_ATOMIC);
 	if (!edesc) {
-		dev_dbg(dev, "Failed to allocate a descriptor\n");
+		dev_err(dev, "%s: Failed to allocate a descriptor\n", __func__);
 		return NULL;
 	}
 
 	edesc->cyclic = 1;
 	edesc->pset_nr = nslots;
+	edesc->residue = edesc->residue_stat = buf_len;
+	edesc->direction = direction;
+	edesc->echan = echan;
 
-	dev_dbg(dev, "%s: nslots=%d\n", __func__, nslots);
-	dev_dbg(dev, "%s: period_len=%d\n", __func__, period_len);
-	dev_dbg(dev, "%s: buf_len=%d\n", __func__, buf_len);
+	dev_dbg(dev, "%s: channel=%d nslots=%d period_len=%zu buf_len=%zu\n",
+		__func__, echan->ch_num, nslots, period_len, buf_len);
 
 	for (i = 0; i < nslots; i++) {
 		/* Allocate a PaRAM slot, if needed */
@@ -542,7 +667,8 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
 						EDMA_SLOT_ANY);
 			if (echan->slot[i] < 0) {
 				kfree(edesc);
-				dev_err(dev, "Failed to allocate slot\n");
+				dev_err(dev, "%s: Failed to allocate slot\n",
+					__func__);
 				return NULL;
 			}
 		}
@@ -566,8 +692,8 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
 		else
 			src_addr += period_len;
 
-		dev_dbg(dev, "%s: Configure period %d of buf:\n", __func__, i);
-		dev_dbg(dev,
+		dev_vdbg(dev, "%s: Configure period %d of buf:\n", __func__, i);
+		dev_vdbg(dev,
 			"\n pset[%d]:\n"
 			"  chnum\t%d\n"
 			"  slot\t%d\n"
@@ -580,14 +706,14 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
 			"  cidx\t%08x\n"
 			"  lkrld\t%08x\n",
 			i, echan->ch_num, echan->slot[i],
-			edesc->pset[i].opt,
-			edesc->pset[i].src,
-			edesc->pset[i].dst,
-			edesc->pset[i].a_b_cnt,
-			edesc->pset[i].ccnt,
-			edesc->pset[i].src_dst_bidx,
-			edesc->pset[i].src_dst_cidx,
-			edesc->pset[i].link_bcntrld);
+			edesc->pset[i].param.opt,
+			edesc->pset[i].param.src,
+			edesc->pset[i].param.dst,
+			edesc->pset[i].param.a_b_cnt,
+			edesc->pset[i].param.ccnt,
+			edesc->pset[i].param.src_dst_bidx,
+			edesc->pset[i].param.src_dst_cidx,
+			edesc->pset[i].param.link_bcntrld);
 
 		edesc->absync = ret;
 
@@ -595,7 +721,7 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
 		 * Enable interrupts for every period because callback
 		 * has to be called for every period.
 		 */
-		edesc->pset[i].opt |= TCINTEN;
+		edesc->pset[i].param.opt |= TCINTEN;
 	}
 
 	return vchan_tx_prep(&echan->vchan, &edesc->vdesc, tx_flags);
@@ -606,7 +732,6 @@ static void edma_callback(unsigned ch_num, u16 ch_status, void *data)
 	struct edma_chan *echan = data;
 	struct device *dev = echan->vchan.chan.device->dev;
 	struct edma_desc *edesc;
-	unsigned long flags;
 	struct edmacc_param p;
 
 	edesc = echan->edesc;
@@ -617,27 +742,34 @@ static void edma_callback(unsigned ch_num, u16 ch_status, void *data)
 
 	switch (ch_status) {
 	case EDMA_DMA_COMPLETE:
-		spin_lock_irqsave(&echan->vchan.lock, flags);
+		spin_lock(&echan->vchan.lock);
 
 		if (edesc) {
 			if (edesc->cyclic) {
 				vchan_cyclic_callback(&edesc->vdesc);
 			} else if (edesc->processed == edesc->pset_nr) {
 				dev_dbg(dev, "Transfer complete, stopping channel %d\n", ch_num);
+				edesc->residue = 0;
 				edma_stop(echan->ch_num);
 				vchan_cookie_complete(&edesc->vdesc);
 				edma_execute(echan);
 			} else {
 				dev_dbg(dev, "Intermediate transfer complete on channel %d\n", ch_num);
+
+				/* Update statistics for tx_status */
+				edesc->residue -= edesc->sg_len;
+				edesc->residue_stat = edesc->residue;
+				edesc->processed_stat = edesc->processed;
+
 				edma_execute(echan);
 			}
 		}
 
-		spin_unlock_irqrestore(&echan->vchan.lock, flags);
+		spin_unlock(&echan->vchan.lock);
 
 		break;
 	case EDMA_DMA_CC_ERROR:
-		spin_lock_irqsave(&echan->vchan.lock, flags);
+		spin_lock(&echan->vchan.lock);
 
 		edma_read_slot(EDMA_CHAN_SLOT(echan->slot[0]), &p);
 
@@ -668,7 +800,7 @@ static void edma_callback(unsigned ch_num, u16 ch_status, void *data)
 			edma_trigger_channel(echan->ch_num);
 		}
 
-		spin_unlock_irqrestore(&echan->vchan.lock, flags);
+		spin_unlock(&echan->vchan.lock);
 
 		break;
 	default:
@@ -704,7 +836,7 @@ static int edma_alloc_chan_resources(struct dma_chan *chan)
 	echan->alloced = true;
 	echan->slot[0] = echan->ch_num;
 
-	dev_dbg(dev, "allocated channel for %u:%u\n",
+	dev_dbg(dev, "allocated channel %d for %u:%u\n", echan->ch_num,
 		EDMA_CTLR(echan->ch_num), EDMA_CHAN_SLOT(echan->ch_num));
 
 	return 0;
@@ -756,23 +888,52 @@ static void edma_issue_pending(struct dma_chan *chan)
 	spin_unlock_irqrestore(&echan->vchan.lock, flags);
 }
 
-static size_t edma_desc_size(struct edma_desc *edesc)
+static u32 edma_residue(struct edma_desc *edesc)
 {
+	bool dst = edesc->direction == DMA_DEV_TO_MEM;
+	struct edma_pset *pset = edesc->pset;
+	dma_addr_t done, pos;
 	int i;
-	size_t size;
-
-	if (edesc->absync)
-		for (size = i = 0; i < edesc->pset_nr; i++)
-			size += (edesc->pset[i].a_b_cnt & 0xffff) *
-				(edesc->pset[i].a_b_cnt >> 16) *
-				 edesc->pset[i].ccnt;
-	else
-		size = (edesc->pset[0].a_b_cnt & 0xffff) *
-			(edesc->pset[0].a_b_cnt >> 16) +
-			(edesc->pset[0].a_b_cnt & 0xffff) *
-			(SZ_64K - 1) * edesc->pset[0].ccnt;
-
-	return size;
+
+	/*
+	 * We always read the dst/src position from the first RamPar
+	 * pset. That's the one which is active now.
+	 */
+	pos = edma_get_position(edesc->echan->slot[0], dst);
+
+	/*
+	 * Cyclic is simple. Just subtract pset[0].addr from pos.
+	 *
+	 * We never update edesc->residue in the cyclic case, so we
+	 * can tell the remaining room to the end of the circular
+	 * buffer.
+	 */
+	if (edesc->cyclic) {
+		done = pos - pset->addr;
+		edesc->residue_stat = edesc->residue - done;
+		return edesc->residue_stat;
+	}
+
+	/*
+	 * For SG operation we catch up with the last processed
+	 * status.
+	 */
+	pset += edesc->processed_stat;
+
+	for (i = edesc->processed_stat; i < edesc->processed; i++, pset++) {
+		/*
+		 * If we are inside this pset address range, we know
+		 * this is the active one. Get the current delta and
+		 * stop walking the psets.
+		 */
+		if (pos >= pset->addr && pos < pset->addr + pset->len)
+			return edesc->residue_stat - (pos - pset->addr);
+
+		/* Otherwise mark it done and update residue_stat. */
+		edesc->processed_stat++;
+		edesc->residue_stat -= pset->len;
+	}
+	return edesc->residue_stat;
 }
 
 /* Check request completion status */
@@ -790,13 +951,10 @@ static enum dma_status edma_tx_status(struct dma_chan *chan,
 		return ret;
 
 	spin_lock_irqsave(&echan->vchan.lock, flags);
-	vdesc = vchan_find_desc(&echan->vchan, cookie);
-	if (vdesc) {
-		txstate->residue = edma_desc_size(to_edma_desc(&vdesc->tx));
-	} else if (echan->edesc && echan->edesc->vdesc.tx.cookie == cookie) {
-		struct edma_desc *edesc = echan->edesc;
-		txstate->residue = edma_desc_size(edesc);
-	}
+	if (echan->edesc && echan->edesc->vdesc.tx.cookie == cookie)
+		txstate->residue = edma_residue(echan->edesc);
+	else if ((vdesc = vchan_find_desc(&echan->vchan, cookie)))
+		txstate->residue = to_edma_desc(&vdesc->tx)->residue;
 	spin_unlock_irqrestore(&echan->vchan.lock, flags);
 
 	return ret;
@@ -822,18 +980,43 @@ static void __init edma_chan_init(struct edma_cc *ecc,
 	}
 }
 
+#define EDMA_DMA_BUSWIDTHS	(BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
+				 BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
+				 BIT(DMA_SLAVE_BUSWIDTH_4_BYTES))
+
+static int edma_dma_device_slave_caps(struct dma_chan *dchan,
+				      struct dma_slave_caps *caps)
+{
+	caps->src_addr_widths = EDMA_DMA_BUSWIDTHS;
+	caps->dstn_addr_widths = EDMA_DMA_BUSWIDTHS;
+	caps->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
+	caps->cmd_pause = true;
+	caps->cmd_terminate = true;
+	caps->residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
+
+	return 0;
+}
+
 static void edma_dma_init(struct edma_cc *ecc, struct dma_device *dma,
 			  struct device *dev)
 {
 	dma->device_prep_slave_sg = edma_prep_slave_sg;
 	dma->device_prep_dma_cyclic = edma_prep_dma_cyclic;
+	dma->device_prep_dma_memcpy = edma_prep_dma_memcpy;
 	dma->device_alloc_chan_resources = edma_alloc_chan_resources;
 	dma->device_free_chan_resources = edma_free_chan_resources;
 	dma->device_issue_pending = edma_issue_pending;
 	dma->device_tx_status = edma_tx_status;
 	dma->device_control = edma_control;
+	dma->device_slave_caps = edma_dma_device_slave_caps;
 	dma->dev = dev;
 
+	/*
+	 * code using dma memcpy must make sure alignment of
+	 * length is at dma->copy_align boundary.
+	 */
+	dma->copy_align = DMA_SLAVE_BUSWIDTH_4_BYTES;
+
 	INIT_LIST_HEAD(&dma->channels);
 }
 
@@ -861,6 +1044,8 @@ static int edma_probe(struct platform_device *pdev)
 
 	dma_cap_zero(ecc->dma_slave.cap_mask);
 	dma_cap_set(DMA_SLAVE, ecc->dma_slave.cap_mask);
+	dma_cap_set(DMA_CYCLIC, ecc->dma_slave.cap_mask);
+	dma_cap_set(DMA_MEMCPY, ecc->dma_slave.cap_mask);
 
 	edma_dma_init(ecc, &ecc->dma_slave, &pdev->dev);
 
diff --git a/drivers/memory/mvebu-devbus.c b/drivers/memory/mvebu-devbus.c
index b59a17fb7c3e..ff7138fd66d1 100644
--- a/drivers/memory/mvebu-devbus.c
+++ b/drivers/memory/mvebu-devbus.c
@@ -2,7 +2,7 @@
  * Marvell EBU SoC Device Bus Controller
  * (memory controller for NOR/NAND/SRAM/FPGA devices)
  *
- * Copyright (C) 2013 Marvell
+ * Copyright (C) 2013-2014 Marvell
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -30,19 +30,47 @@
 #include <linux/platform_device.h>
 
 /* Register definitions */
-#define DEV_WIDTH_BIT		30
-#define BADR_SKEW_BIT		28
-#define RD_HOLD_BIT		23
-#define ACC_NEXT_BIT		17
-#define RD_SETUP_BIT		12
-#define ACC_FIRST_BIT		6
-
-#define SYNC_ENABLE_BIT		24
-#define WR_HIGH_BIT		16
-#define WR_LOW_BIT		8
-
-#define READ_PARAM_OFFSET	0x0
-#define WRITE_PARAM_OFFSET	0x4
+#define ARMADA_DEV_WIDTH_SHIFT		30
+#define ARMADA_BADR_SKEW_SHIFT		28
+#define ARMADA_RD_HOLD_SHIFT		23
+#define ARMADA_ACC_NEXT_SHIFT		17
+#define ARMADA_RD_SETUP_SHIFT		12
+#define ARMADA_ACC_FIRST_SHIFT		6
+
+#define ARMADA_SYNC_ENABLE_SHIFT	24
+#define ARMADA_WR_HIGH_SHIFT		16
+#define ARMADA_WR_LOW_SHIFT		8
+
+#define ARMADA_READ_PARAM_OFFSET	0x0
+#define ARMADA_WRITE_PARAM_OFFSET	0x4
+
+#define ORION_RESERVED			(0x2 << 30)
+#define ORION_BADR_SKEW_SHIFT		28
+#define ORION_WR_HIGH_EXT_BIT		BIT(27)
+#define ORION_WR_HIGH_EXT_MASK		0x8
+#define ORION_WR_LOW_EXT_BIT		BIT(26)
+#define ORION_WR_LOW_EXT_MASK		0x8
+#define ORION_ALE_WR_EXT_BIT		BIT(25)
+#define ORION_ALE_WR_EXT_MASK		0x8
+#define ORION_ACC_NEXT_EXT_BIT		BIT(24)
+#define ORION_ACC_NEXT_EXT_MASK		0x10
+#define ORION_ACC_FIRST_EXT_BIT		BIT(23)
+#define ORION_ACC_FIRST_EXT_MASK	0x10
+#define ORION_TURN_OFF_EXT_BIT		BIT(22)
+#define ORION_TURN_OFF_EXT_MASK		0x8
+#define ORION_DEV_WIDTH_SHIFT		20
+#define ORION_WR_HIGH_SHIFT		17
+#define ORION_WR_HIGH_MASK		0x7
+#define ORION_WR_LOW_SHIFT		14
+#define ORION_WR_LOW_MASK		0x7
+#define ORION_ALE_WR_SHIFT		11
+#define ORION_ALE_WR_MASK		0x7
+#define ORION_ACC_NEXT_SHIFT		7
+#define ORION_ACC_NEXT_MASK		0xF
+#define ORION_ACC_FIRST_SHIFT		3
+#define ORION_ACC_FIRST_MASK		0xF
+#define ORION_TURN_OFF_SHIFT		0
+#define ORION_TURN_OFF_MASK		0x7
 
 struct devbus_read_params {
 	u32 bus_width;
@@ -89,19 +117,14 @@ static int get_timing_param_ps(struct devbus *devbus,
 	return 0;
 }
 
-static int devbus_set_timing_params(struct devbus *devbus,
-				    struct device_node *node)
+static int devbus_get_timing_params(struct devbus *devbus,
+				    struct device_node *node,
+				    struct devbus_read_params *r,
+				    struct devbus_write_params *w)
 {
-	struct devbus_read_params r;
-	struct devbus_write_params w;
-	u32 value;
 	int err;
 
-	dev_dbg(devbus->dev, "Setting timing parameter, tick is %lu ps\n",
-		devbus->tick_ps);
-
-	/* Get read timings */
-	err = of_property_read_u32(node, "devbus,bus-width", &r.bus_width);
+	err = of_property_read_u32(node, "devbus,bus-width", &r->bus_width);
 	if (err < 0) {
 		dev_err(devbus->dev,
 			"%s has no 'devbus,bus-width' property\n",
@@ -113,104 +136,148 @@ static int devbus_set_timing_params(struct devbus *devbus,
 	 * The bus width is encoded into the register as 0 for 8 bits,
 	 * and 1 for 16 bits, so we do the necessary conversion here.
 	 */
-	if (r.bus_width == 8)
-		r.bus_width = 0;
-	else if (r.bus_width == 16)
-		r.bus_width = 1;
+	if (r->bus_width == 8)
+		r->bus_width = 0;
+	else if (r->bus_width == 16)
+		r->bus_width = 1;
 	else {
-		dev_err(devbus->dev, "invalid bus width %d\n", r.bus_width);
+		dev_err(devbus->dev, "invalid bus width %d\n", r->bus_width);
 		return -EINVAL;
 	}
 
 	err = get_timing_param_ps(devbus, node, "devbus,badr-skew-ps",
-				 &r.badr_skew);
+				 &r->badr_skew);
 	if (err < 0)
 		return err;
 
 	err = get_timing_param_ps(devbus, node, "devbus,turn-off-ps",
-				 &r.turn_off);
+				 &r->turn_off);
 	if (err < 0)
 		return err;
 
 	err = get_timing_param_ps(devbus, node, "devbus,acc-first-ps",
-				 &r.acc_first);
+				 &r->acc_first);
 	if (err < 0)
 		return err;
 
 	err = get_timing_param_ps(devbus, node, "devbus,acc-next-ps",
-				 &r.acc_next);
-	if (err < 0)
-		return err;
-
-	err = get_timing_param_ps(devbus, node, "devbus,rd-setup-ps",
-				 &r.rd_setup);
+				 &r->acc_next);
 	if (err < 0)
 		return err;
 
-	err = get_timing_param_ps(devbus, node, "devbus,rd-hold-ps",
-				 &r.rd_hold);
-	if (err < 0)
-		return err;
-
-	/* Get write timings */
-	err = of_property_read_u32(node, "devbus,sync-enable",
-				  &w.sync_enable);
-	if (err < 0) {
-		dev_err(devbus->dev,
-			"%s has no 'devbus,sync-enable' property\n",
-			node->full_name);
-		return err;
+	if (of_device_is_compatible(devbus->dev->of_node, "marvell,mvebu-devbus")) {
+		err = get_timing_param_ps(devbus, node, "devbus,rd-setup-ps",
+					  &r->rd_setup);
+		if (err < 0)
+			return err;
+
+		err = get_timing_param_ps(devbus, node, "devbus,rd-hold-ps",
+					  &r->rd_hold);
+		if (err < 0)
+			return err;
+
+		err = of_property_read_u32(node, "devbus,sync-enable",
+					   &w->sync_enable);
+		if (err < 0) {
+			dev_err(devbus->dev,
+				"%s has no 'devbus,sync-enable' property\n",
+				node->full_name);
+			return err;
+		}
 	}
 
 	err = get_timing_param_ps(devbus, node, "devbus,ale-wr-ps",
-				 &w.ale_wr);
+				 &w->ale_wr);
 	if (err < 0)
 		return err;
 
 	err = get_timing_param_ps(devbus, node, "devbus,wr-low-ps",
-				 &w.wr_low);
+				 &w->wr_low);
 	if (err < 0)
 		return err;
 
 	err = get_timing_param_ps(devbus, node, "devbus,wr-high-ps",
-				 &w.wr_high);
+				 &w->wr_high);
 	if (err < 0)
 		return err;
 
+	return 0;
+}
+
+static void devbus_orion_set_timing_params(struct devbus *devbus,
+					  struct device_node *node,
+					  struct devbus_read_params *r,
+					  struct devbus_write_params *w)
+{
+	u32 value;
+
+	/*
+	 * The hardware designers found it would be a good idea to
+	 * split most of the values in the register into two fields:
+	 * one containing all the low-order bits, and another one
+	 * containing just the high-order bit. For all of those
+	 * fields, we have to split the value into these two parts.
+	 */
+	value =	(r->turn_off   & ORION_TURN_OFF_MASK)  << ORION_TURN_OFF_SHIFT  |
+		(r->acc_first  & ORION_ACC_FIRST_MASK) << ORION_ACC_FIRST_SHIFT |
+		(r->acc_next   & ORION_ACC_NEXT_MASK)  << ORION_ACC_NEXT_SHIFT  |
+		(w->ale_wr     & ORION_ALE_WR_MASK)    << ORION_ALE_WR_SHIFT    |
+		(w->wr_low     & ORION_WR_LOW_MASK)    << ORION_WR_LOW_SHIFT    |
+		(w->wr_high    & ORION_WR_HIGH_MASK)   << ORION_WR_HIGH_SHIFT   |
+		r->bus_width                           << ORION_DEV_WIDTH_SHIFT |
+		((r->turn_off  & ORION_TURN_OFF_EXT_MASK)  ? ORION_TURN_OFF_EXT_BIT  : 0) |
+		((r->acc_first & ORION_ACC_FIRST_EXT_MASK) ? ORION_ACC_FIRST_EXT_BIT : 0) |
+		((r->acc_next  & ORION_ACC_NEXT_EXT_MASK)  ? ORION_ACC_NEXT_EXT_BIT  : 0) |
+		((w->ale_wr    & ORION_ALE_WR_EXT_MASK)    ? ORION_ALE_WR_EXT_BIT    : 0) |
+		((w->wr_low    & ORION_WR_LOW_EXT_MASK)    ? ORION_WR_LOW_EXT_BIT    : 0) |
+		((w->wr_high   & ORION_WR_HIGH_EXT_MASK)   ? ORION_WR_HIGH_EXT_BIT   : 0) |
+		(r->badr_skew << ORION_BADR_SKEW_SHIFT) |
+		ORION_RESERVED;
+
+	writel(value, devbus->base);
+}
+
+static void devbus_armada_set_timing_params(struct devbus *devbus,
+					   struct device_node *node,
+					   struct devbus_read_params *r,
+					   struct devbus_write_params *w)
+{
+	u32 value;
+
 	/* Set read timings */
-	value = r.bus_width << DEV_WIDTH_BIT |
-		r.badr_skew << BADR_SKEW_BIT |
-		r.rd_hold   << RD_HOLD_BIT   |
-		r.acc_next  << ACC_NEXT_BIT  |
-		r.rd_setup  << RD_SETUP_BIT  |
-		r.acc_first << ACC_FIRST_BIT |
-		r.turn_off;
+	value = r->bus_width << ARMADA_DEV_WIDTH_SHIFT |
+		r->badr_skew << ARMADA_BADR_SKEW_SHIFT |
+		r->rd_hold   << ARMADA_RD_HOLD_SHIFT   |
+		r->acc_next  << ARMADA_ACC_NEXT_SHIFT  |
+		r->rd_setup  << ARMADA_RD_SETUP_SHIFT  |
+		r->acc_first << ARMADA_ACC_FIRST_SHIFT |
+		r->turn_off;
 
 	dev_dbg(devbus->dev, "read parameters register 0x%p = 0x%x\n",
-		devbus->base + READ_PARAM_OFFSET,
+		devbus->base + ARMADA_READ_PARAM_OFFSET,
 		value);
 
-	writel(value, devbus->base + READ_PARAM_OFFSET);
+	writel(value, devbus->base + ARMADA_READ_PARAM_OFFSET);
 
 	/* Set write timings */
-	value = w.sync_enable  << SYNC_ENABLE_BIT |
-		w.wr_low       << WR_LOW_BIT      |
-		w.wr_high      << WR_HIGH_BIT     |
-		w.ale_wr;
+	value = w->sync_enable  << ARMADA_SYNC_ENABLE_SHIFT |
+		w->wr_low       << ARMADA_WR_LOW_SHIFT      |
+		w->wr_high      << ARMADA_WR_HIGH_SHIFT     |
+		w->ale_wr;
 
 	dev_dbg(devbus->dev, "write parameters register: 0x%p = 0x%x\n",
-		devbus->base + WRITE_PARAM_OFFSET,
+		devbus->base + ARMADA_WRITE_PARAM_OFFSET,
 		value);
 
-	writel(value, devbus->base + WRITE_PARAM_OFFSET);
-
-	return 0;
+	writel(value, devbus->base + ARMADA_WRITE_PARAM_OFFSET);
 }
 
 static int mvebu_devbus_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *node = pdev->dev.of_node;
+	struct devbus_read_params r;
+	struct devbus_write_params w;
 	struct devbus *devbus;
 	struct resource *res;
 	struct clk *clk;
@@ -240,10 +307,21 @@ static int mvebu_devbus_probe(struct platform_device *pdev)
 	rate = clk_get_rate(clk) / 1000;
 	devbus->tick_ps = 1000000000 / rate;
 
-	/* Read the device tree node and set the new timing parameters */
-	err = devbus_set_timing_params(devbus, node);
-	if (err < 0)
-		return err;
+	dev_dbg(devbus->dev, "Setting timing parameter, tick is %lu ps\n",
+		devbus->tick_ps);
+
+	if (!of_property_read_bool(node, "devbus,keep-config")) {
+		/* Read the Device Tree node */
+		err = devbus_get_timing_params(devbus, node, &r, &w);
+		if (err < 0)
+			return err;
+
+		/* Set the new timing parameters */
+		if (of_device_is_compatible(node, "marvell,orion-devbus"))
+			devbus_orion_set_timing_params(devbus, node, &r, &w);
+		else
+			devbus_armada_set_timing_params(devbus, node, &r, &w);
+	}
 
 	/*
 	 * We need to create a child device explicitly from here to
@@ -259,6 +337,7 @@ static int mvebu_devbus_probe(struct platform_device *pdev)
 
 static const struct of_device_id mvebu_devbus_of_match[] = {
 	{ .compatible = "marvell,mvebu-devbus" },
+	{ .compatible = "marvell,orion-devbus" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, mvebu_devbus_of_match);
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 49b46e6ca959..bdcf5173e377 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -51,6 +51,13 @@ config POWER_RESET_RESTART
 	  Instead they restart, and u-boot holds the SoC until the
 	  user presses a key. u-boot then boots into Linux.
 
+config POWER_RESET_SUN6I
+	bool "Allwinner A31 SoC reset driver"
+	depends on ARCH_SUNXI
+	depends on POWER_RESET
+	help
+	  Reboot support for the Allwinner A31 SoCs.
+
 config POWER_RESET_VEXPRESS
 	bool "ARM Versatile Express power-off and reset driver"
 	depends on ARM || ARM64
@@ -65,3 +72,11 @@ config POWER_RESET_XGENE
 	depends on POWER_RESET
 	help
 	  Reboot support for the APM SoC X-Gene Eval boards.
+
+config POWER_RESET_KEYSTONE
+	bool "Keystone reset driver"
+	depends on ARCH_KEYSTONE
+	select MFD_SYSCON
+	help
+	  Reboot support for the KEYSTONE SoCs.
+
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index 16c0516e5a19..dde2e8bbac53 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -4,5 +4,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
 obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
 obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
 obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
+obj-$(CONFIG_POWER_RESET_SUN6I) += sun6i-reboot.o
 obj-$(CONFIG_POWER_RESET_VEXPRESS) += vexpress-poweroff.o
 obj-$(CONFIG_POWER_RESET_XGENE) += xgene-reboot.o
+obj-$(CONFIG_POWER_RESET_KEYSTONE) += keystone-reset.o
diff --git a/drivers/power/reset/keystone-reset.c b/drivers/power/reset/keystone-reset.c
new file mode 100644
index 000000000000..408a18fd91cb
--- /dev/null
+++ b/drivers/power/reset/keystone-reset.c
@@ -0,0 +1,166 @@
+/*
+ * TI keystone reboot driver
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated. http://www.ti.com/
+ *
+ * Author: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+#include <asm/system_misc.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_platform.h>
+
+#define RSTYPE_RG			0x0
+#define RSCTRL_RG			0x4
+#define RSCFG_RG			0x8
+#define RSISO_RG			0xc
+
+#define RSCTRL_KEY_MASK			0x0000ffff
+#define RSCTRL_RESET_MASK		BIT(16)
+#define RSCTRL_KEY			0x5a69
+
+#define RSMUX_OMODE_MASK		0xe
+#define RSMUX_OMODE_RESET_ON		0xa
+#define RSMUX_OMODE_RESET_OFF		0x0
+#define RSMUX_LOCK_MASK			0x1
+#define RSMUX_LOCK_SET			0x1
+
+#define RSCFG_RSTYPE_SOFT		0x300f
+#define RSCFG_RSTYPE_HARD		0x0
+
+#define WDT_MUX_NUMBER			0x4
+
+static int rspll_offset;
+static struct regmap *pllctrl_regs;
+
+/**
+ * rsctrl_enable_rspll_write - enable access to RSCTRL, RSCFG
+ * To be able to access to RSCTRL, RSCFG registers
+ * we have to write a key before
+ */
+static inline int rsctrl_enable_rspll_write(void)
+{
+	return regmap_update_bits(pllctrl_regs, rspll_offset + RSCTRL_RG,
+				  RSCTRL_KEY_MASK, RSCTRL_KEY);
+}
+
+static void rsctrl_restart(enum reboot_mode mode, const char *cmd)
+{
+	/* enable write access to RSTCTRL */
+	rsctrl_enable_rspll_write();
+
+	/* reset the SOC */
+	regmap_update_bits(pllctrl_regs, rspll_offset + RSCTRL_RG,
+			   RSCTRL_RESET_MASK, 0);
+}
+
+static struct of_device_id rsctrl_of_match[] = {
+	{.compatible = "ti,keystone-reset", },
+	{},
+};
+
+static int rsctrl_probe(struct platform_device *pdev)
+{
+	int i;
+	int ret;
+	u32 val;
+	unsigned int rg;
+	u32 rsmux_offset;
+	struct regmap *devctrl_regs;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+
+	if (!np)
+		return -ENODEV;
+
+	/* get regmaps */
+	pllctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-pll");
+	if (IS_ERR(pllctrl_regs))
+		return PTR_ERR(pllctrl_regs);
+
+	devctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-dev");
+	if (IS_ERR(devctrl_regs))
+		return PTR_ERR(devctrl_regs);
+
+	ret = of_property_read_u32_index(np, "ti,syscon-pll", 1, &rspll_offset);
+	if (ret) {
+		dev_err(dev, "couldn't read the reset pll offset!\n");
+		return -EINVAL;
+	}
+
+	ret = of_property_read_u32_index(np, "ti,syscon-dev", 1, &rsmux_offset);
+	if (ret) {
+		dev_err(dev, "couldn't read the rsmux offset!\n");
+		return -EINVAL;
+	}
+
+	/* set soft/hard reset */
+	val = of_property_read_bool(np, "ti,soft-reset");
+	val = val ? RSCFG_RSTYPE_SOFT : RSCFG_RSTYPE_HARD;
+
+	ret = rsctrl_enable_rspll_write();
+	if (ret)
+		return ret;
+
+	ret = regmap_write(pllctrl_regs, rspll_offset + RSCFG_RG, val);
+	if (ret)
+		return ret;
+
+	arm_pm_restart = rsctrl_restart;
+
+	/* disable a reset isolation for all module clocks */
+	ret = regmap_write(pllctrl_regs, rspll_offset + RSISO_RG, 0);
+	if (ret)
+		return ret;
+
+	/* enable a reset for watchdogs from wdt-list */
+	for (i = 0; i < WDT_MUX_NUMBER; i++) {
+		ret = of_property_read_u32_index(np, "ti,wdt-list", i, &val);
+		if (ret == -EOVERFLOW && !i) {
+			dev_err(dev, "ti,wdt-list property has to contain at"
+				"least one entry\n");
+			return -EINVAL;
+		} else if (ret) {
+			break;
+		}
+
+		if (val >= WDT_MUX_NUMBER) {
+			dev_err(dev, "ti,wdt-list property can contain"
+				"only numbers < 4\n");
+			return -EINVAL;
+		}
+
+		rg = rsmux_offset + val * 4;
+
+		ret = regmap_update_bits(devctrl_regs, rg, RSMUX_OMODE_MASK,
+					 RSMUX_OMODE_RESET_ON |
+					 RSMUX_LOCK_SET);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static struct platform_driver rsctrl_driver = {
+	.probe = rsctrl_probe,
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = KBUILD_MODNAME,
+		.of_match_table = rsctrl_of_match,
+	},
+};
+module_platform_driver(rsctrl_driver);
+
+MODULE_AUTHOR("Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>");
+MODULE_DESCRIPTION("Texas Instruments keystone reset driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" KBUILD_MODNAME);
diff --git a/drivers/power/reset/sun6i-reboot.c b/drivers/power/reset/sun6i-reboot.c
new file mode 100644
index 000000000000..af2cd7ff2fe8
--- /dev/null
+++ b/drivers/power/reset/sun6i-reboot.c
@@ -0,0 +1,85 @@
+/*
+ * Allwinner A31 SoCs reset code
+ *
+ * Copyright (C) 2012-2014 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+
+#include <asm/system_misc.h>
+
+#define SUN6I_WATCHDOG1_IRQ_REG		0x00
+#define SUN6I_WATCHDOG1_CTRL_REG	0x10
+#define SUN6I_WATCHDOG1_CTRL_RESTART		BIT(0)
+#define SUN6I_WATCHDOG1_CONFIG_REG	0x14
+#define SUN6I_WATCHDOG1_CONFIG_RESTART		BIT(0)
+#define SUN6I_WATCHDOG1_CONFIG_IRQ		BIT(1)
+#define SUN6I_WATCHDOG1_MODE_REG	0x18
+#define SUN6I_WATCHDOG1_MODE_ENABLE		BIT(0)
+
+static void __iomem *wdt_base;
+
+static void sun6i_wdt_restart(enum reboot_mode mode, const char *cmd)
+{
+	if (!wdt_base)
+		return;
+
+	/* Disable interrupts */
+	writel(0, wdt_base + SUN6I_WATCHDOG1_IRQ_REG);
+
+	/* We want to disable the IRQ and just reset the whole system */
+	writel(SUN6I_WATCHDOG1_CONFIG_RESTART,
+		wdt_base + SUN6I_WATCHDOG1_CONFIG_REG);
+
+	/* Enable timer. The default and lowest interval value is 0.5s */
+	writel(SUN6I_WATCHDOG1_MODE_ENABLE,
+		wdt_base + SUN6I_WATCHDOG1_MODE_REG);
+
+	/* Restart the watchdog. */
+	writel(SUN6I_WATCHDOG1_CTRL_RESTART,
+		wdt_base + SUN6I_WATCHDOG1_CTRL_REG);
+
+	while (1) {
+		mdelay(5);
+		writel(SUN6I_WATCHDOG1_MODE_ENABLE,
+			wdt_base + SUN6I_WATCHDOG1_MODE_REG);
+	}
+}
+
+static int sun6i_reboot_probe(struct platform_device *pdev)
+{
+	wdt_base = of_iomap(pdev->dev.of_node, 0);
+	if (!wdt_base) {
+		WARN(1, "failed to map watchdog base address");
+		return -ENODEV;
+	}
+
+	arm_pm_restart = sun6i_wdt_restart;
+
+	return 0;
+}
+
+static struct of_device_id sun6i_reboot_of_match[] = {
+	{ .compatible = "allwinner,sun6i-a31-wdt" },
+	{}
+};
+
+static struct platform_driver sun6i_reboot_driver = {
+	.probe = sun6i_reboot_probe,
+	.driver = {
+		.name = "sun6i-reboot",
+		.of_match_table = sun6i_reboot_of_match,
+	},
+};
+module_platform_driver(sun6i_reboot_driver);
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 4f60caf750ce..60fed3d7820b 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -1,3 +1,4 @@
 obj-$(CONFIG_RESET_CONTROLLER) += core.o
+obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
 obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
 obj-$(CONFIG_ARCH_STI) += sti/
diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c
new file mode 100644
index 000000000000..79c32ca84ef1
--- /dev/null
+++ b/drivers/reset/reset-socfpga.c
@@ -0,0 +1,146 @@
+/*
+ * Copyright 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * based on
+ * Allwinner SoCs Reset Controller driver
+ *
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#define NR_BANKS		4
+#define OFFSET_MODRST		0x10
+
+struct socfpga_reset_data {
+	spinlock_t			lock;
+	void __iomem			*membase;
+	struct reset_controller_dev	rcdev;
+};
+
+static int socfpga_reset_assert(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	struct socfpga_reset_data *data = container_of(rcdev,
+						     struct socfpga_reset_data,
+						     rcdev);
+	int bank = id / BITS_PER_LONG;
+	int offset = id % BITS_PER_LONG;
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&data->lock, flags);
+
+	reg = readl(data->membase + OFFSET_MODRST + (bank * NR_BANKS));
+	writel(reg | BIT(offset), data->membase + OFFSET_MODRST +
+				 (bank * NR_BANKS));
+	spin_unlock_irqrestore(&data->lock, flags);
+
+	return 0;
+}
+
+static int socfpga_reset_deassert(struct reset_controller_dev *rcdev,
+				  unsigned long id)
+{
+	struct socfpga_reset_data *data = container_of(rcdev,
+						     struct socfpga_reset_data,
+						     rcdev);
+
+	int bank = id / BITS_PER_LONG;
+	int offset = id % BITS_PER_LONG;
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&data->lock, flags);
+
+	reg = readl(data->membase + OFFSET_MODRST + (bank * NR_BANKS));
+	writel(reg & ~BIT(offset), data->membase + OFFSET_MODRST +
+				  (bank * NR_BANKS));
+
+	spin_unlock_irqrestore(&data->lock, flags);
+
+	return 0;
+}
+
+static struct reset_control_ops socfpga_reset_ops = {
+	.assert		= socfpga_reset_assert,
+	.deassert	= socfpga_reset_deassert,
+};
+
+static int socfpga_reset_probe(struct platform_device *pdev)
+{
+	struct socfpga_reset_data *data;
+	struct resource *res;
+
+	/*
+	 * The binding was mainlined without the required property.
+	 * Do not continue, when we encounter an old DT.
+	 */
+	if (!of_find_property(pdev->dev.of_node, "#reset-cells", NULL)) {
+		dev_err(&pdev->dev, "%s missing #reset-cells property\n",
+			pdev->dev.of_node->full_name);
+		return -EINVAL;
+	}
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data->membase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(data->membase))
+		return PTR_ERR(data->membase);
+
+	spin_lock_init(&data->lock);
+
+	data->rcdev.owner = THIS_MODULE;
+	data->rcdev.nr_resets = NR_BANKS * BITS_PER_LONG;
+	data->rcdev.ops = &socfpga_reset_ops;
+	data->rcdev.of_node = pdev->dev.of_node;
+	reset_controller_register(&data->rcdev);
+
+	return 0;
+}
+
+static int socfpga_reset_remove(struct platform_device *pdev)
+{
+	struct socfpga_reset_data *data = platform_get_drvdata(pdev);
+
+	reset_controller_unregister(&data->rcdev);
+
+	return 0;
+}
+
+static const struct of_device_id socfpga_reset_dt_ids[] = {
+	{ .compatible = "altr,rst-mgr", },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver socfpga_reset_driver = {
+	.probe	= socfpga_reset_probe,
+	.remove	= socfpga_reset_remove,
+	.driver = {
+		.name		= "socfpga-reset",
+		.owner		= THIS_MODULE,
+		.of_match_table	= socfpga_reset_dt_ids,
+	},
+};
+module_platform_driver(socfpga_reset_driver);
+
+MODULE_AUTHOR("Steffen Trumtrar <s.trumtrar@pengutronix.de");
+MODULE_DESCRIPTION("Socfpga Reset Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/reset/reset-sunxi.c b/drivers/reset/reset-sunxi.c
index 695bd3496eba..a94e7a7820b4 100644
--- a/drivers/reset/reset-sunxi.c
+++ b/drivers/reset/reset-sunxi.c
@@ -145,7 +145,24 @@ MODULE_DEVICE_TABLE(of, sunxi_reset_dt_ids);
 
 static int sunxi_reset_probe(struct platform_device *pdev)
 {
-	return sunxi_reset_init(pdev->dev.of_node);
+	struct sunxi_reset_data *data;
+	struct resource *res;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data->membase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(data->membase))
+		return PTR_ERR(data->membase);
+
+	data->rcdev.owner = THIS_MODULE;
+	data->rcdev.nr_resets = resource_size(res) * 32;
+	data->rcdev.ops = &sunxi_reset_ops;
+	data->rcdev.of_node = pdev->dev.of_node;
+
+	return reset_controller_register(&data->rcdev);
 }
 
 static int sunxi_reset_remove(struct platform_device *pdev)
@@ -153,8 +170,6 @@ static int sunxi_reset_remove(struct platform_device *pdev)
 	struct sunxi_reset_data *data = platform_get_drvdata(pdev);
 
 	reset_controller_unregister(&data->rcdev);
-	iounmap(data->membase);
-	kfree(data);
 
 	return 0;
 }
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
new file mode 100644
index 000000000000..c8543855aa82
--- /dev/null
+++ b/drivers/soc/Kconfig
@@ -0,0 +1,5 @@
+menu "SOC (System On Chip) specific Drivers"
+
+source "drivers/soc/qcom/Kconfig"
+
+endmenu
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
new file mode 100644
index 000000000000..0f7c44793b29
--- /dev/null
+++ b/drivers/soc/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Linux Kernel SOC specific device drivers.
+#
+
+obj-$(CONFIG_ARCH_QCOM)		+= qcom/
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
new file mode 100644
index 000000000000..7bd2c94f54a4
--- /dev/null
+++ b/drivers/soc/qcom/Kconfig
@@ -0,0 +1,11 @@
+#
+# QCOM Soc drivers
+#
+config QCOM_GSBI
+        tristate "QCOM General Serial Bus Interface"
+        depends on ARCH_QCOM
+        help
+          Say y here to enable GSBI support.  The GSBI provides control
+          functions for connecting the underlying serial UART, SPI, and I2C
+          devices to the output pins.
+
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
new file mode 100644
index 000000000000..438901257ac1
--- /dev/null
+++ b/drivers/soc/qcom/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_QCOM_GSBI)	+=	qcom_gsbi.o
diff --git a/drivers/soc/qcom/qcom_gsbi.c b/drivers/soc/qcom/qcom_gsbi.c
new file mode 100644
index 000000000000..447458e696a9
--- /dev/null
+++ b/drivers/soc/qcom/qcom_gsbi.c
@@ -0,0 +1,85 @@
+/*
+ * Copyright (c) 2014, The Linux foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License rev 2 and
+ * only rev 2 as published by the free Software foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#define GSBI_CTRL_REG		0x0000
+#define GSBI_PROTOCOL_SHIFT	4
+
+static int gsbi_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct resource *res;
+	void __iomem *base;
+	struct clk *hclk;
+	u32 mode, crci = 0;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	if (of_property_read_u32(node, "qcom,mode", &mode)) {
+		dev_err(&pdev->dev, "missing mode configuration\n");
+		return -EINVAL;
+	}
+
+	/* not required, so default to 0 if not present */
+	of_property_read_u32(node, "qcom,crci", &crci);
+
+	dev_info(&pdev->dev, "GSBI port protocol: %d crci: %d\n", mode, crci);
+
+	hclk = devm_clk_get(&pdev->dev, "iface");
+	if (IS_ERR(hclk))
+		return PTR_ERR(hclk);
+
+	clk_prepare_enable(hclk);
+
+	writel_relaxed((mode << GSBI_PROTOCOL_SHIFT) | crci,
+				base + GSBI_CTRL_REG);
+
+	/* make sure the gsbi control write is not reordered */
+	wmb();
+
+	clk_disable_unprepare(hclk);
+
+	return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+}
+
+static const struct of_device_id gsbi_dt_match[] = {
+	{ .compatible = "qcom,gsbi-v1.0.0", },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, gsbi_dt_match);
+
+static struct platform_driver gsbi_driver = {
+	.driver = {
+		.name		= "gsbi",
+		.owner		= THIS_MODULE,
+		.of_match_table	= gsbi_dt_match,
+	},
+	.probe = gsbi_probe,
+};
+
+module_platform_driver(gsbi_driver);
+
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
+MODULE_DESCRIPTION("QCOM GSBI driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 053b98eb46c8..778e376f197e 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -52,7 +52,6 @@ struct msm_port {
 	struct clk		*clk;
 	struct clk		*pclk;
 	unsigned int		imr;
-	void __iomem		*gsbi_base;
 	int			is_uartdm;
 	unsigned int		old_snap_state;
 };
@@ -599,9 +598,7 @@ static const char *msm_type(struct uart_port *port)
 static void msm_release_port(struct uart_port *port)
 {
 	struct platform_device *pdev = to_platform_device(port->dev);
-	struct msm_port *msm_port = UART_TO_MSM(port);
 	struct resource *uart_resource;
-	struct resource *gsbi_resource;
 	resource_size_t size;
 
 	uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -612,28 +609,12 @@ static void msm_release_port(struct uart_port *port)
 	release_mem_region(port->mapbase, size);
 	iounmap(port->membase);
 	port->membase = NULL;
-
-	if (msm_port->gsbi_base) {
-		writel_relaxed(GSBI_PROTOCOL_IDLE,
-				msm_port->gsbi_base + GSBI_CONTROL);
-
-		gsbi_resource = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-		if (unlikely(!gsbi_resource))
-			return;
-
-		size = resource_size(gsbi_resource);
-		release_mem_region(gsbi_resource->start, size);
-		iounmap(msm_port->gsbi_base);
-		msm_port->gsbi_base = NULL;
-	}
 }
 
 static int msm_request_port(struct uart_port *port)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
 	struct platform_device *pdev = to_platform_device(port->dev);
 	struct resource *uart_resource;
-	struct resource *gsbi_resource;
 	resource_size_t size;
 	int ret;
 
@@ -652,30 +633,8 @@ static int msm_request_port(struct uart_port *port)
 		goto fail_release_port;
 	}
 
-	gsbi_resource = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	/* Is this a GSBI-based port? */
-	if (gsbi_resource) {
-		size = resource_size(gsbi_resource);
-
-		if (!request_mem_region(gsbi_resource->start, size,
-						 "msm_serial")) {
-			ret = -EBUSY;
-			goto fail_release_port_membase;
-		}
-
-		msm_port->gsbi_base = ioremap(gsbi_resource->start, size);
-		if (!msm_port->gsbi_base) {
-			ret = -EBUSY;
-			goto fail_release_gsbi;
-		}
-	}
-
 	return 0;
 
-fail_release_gsbi:
-	release_mem_region(gsbi_resource->start, size);
-fail_release_port_membase:
-	iounmap(port->membase);
 fail_release_port:
 	release_mem_region(port->mapbase, size);
 	return ret;
@@ -683,7 +642,6 @@ fail_release_port:
 
 static void msm_config_port(struct uart_port *port, int flags)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
 	int ret;
 	if (flags & UART_CONFIG_TYPE) {
 		port->type = PORT_MSM;
@@ -691,9 +649,6 @@ static void msm_config_port(struct uart_port *port, int flags)
 		if (ret)
 			return;
 	}
-	if (msm_port->gsbi_base)
-		writel_relaxed(GSBI_PROTOCOL_UART,
-				msm_port->gsbi_base + GSBI_CONTROL);
 }
 
 static int msm_verify_port(struct uart_port *port, struct serial_struct *ser)
@@ -1110,6 +1065,7 @@ static struct of_device_id msm_match_table[] = {
 
 static struct platform_driver msm_platform_driver = {
 	.remove = msm_serial_remove,
+	.probe = msm_serial_probe,
 	.driver = {
 		.name = "msm_serial",
 		.owner = THIS_MODULE,
@@ -1125,7 +1081,7 @@ static int __init msm_serial_init(void)
 	if (unlikely(ret))
 		return ret;
 
-	ret = platform_driver_probe(&msm_platform_driver, msm_serial_probe);
+	ret = platform_driver_register(&msm_platform_driver);
 	if (unlikely(ret))
 		uart_unregister_driver(&msm_uart_driver);
 
diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h
index 1e9b68b6f9eb..d98d45efdf86 100644
--- a/drivers/tty/serial/msm_serial.h
+++ b/drivers/tty/serial/msm_serial.h
@@ -109,11 +109,6 @@
 #define UART_ISR		0x0014
 #define UART_ISR_TX_READY	(1 << 7)
 
-#define GSBI_CONTROL		0x0
-#define GSBI_PROTOCOL_CODE	0x30
-#define GSBI_PROTOCOL_UART	0x40
-#define GSBI_PROTOCOL_IDLE	0x0
-
 #define UARTDM_RXFS		0x50
 #define UARTDM_RXFS_BUF_SHIFT	0x7
 #define UARTDM_RXFS_BUF_MASK	0x7
diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h
index f50821cb64be..eb8d5627d080 100644
--- a/include/linux/platform_data/edma.h
+++ b/include/linux/platform_data/edma.h
@@ -43,15 +43,15 @@
 
 /* PaRAM slots are laid out like this */
 struct edmacc_param {
-	unsigned int opt;
-	unsigned int src;
-	unsigned int a_b_cnt;
-	unsigned int dst;
-	unsigned int src_dst_bidx;
-	unsigned int link_bcntrld;
-	unsigned int src_dst_cidx;
-	unsigned int ccnt;
-};
+	u32 opt;
+	u32 src;
+	u32 a_b_cnt;
+	u32 dst;
+	u32 src_dst_bidx;
+	u32 link_bcntrld;
+	u32 src_dst_cidx;
+	u32 ccnt;
+} __packed;
 
 /* fields in edmacc_param.opt */
 #define SAM		BIT(0)
@@ -130,7 +130,7 @@ void edma_set_src(unsigned slot, dma_addr_t src_port,
 				enum address_mode mode, enum fifo_width);
 void edma_set_dest(unsigned slot, dma_addr_t dest_port,
 				 enum address_mode mode, enum fifo_width);
-void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst);
+dma_addr_t edma_get_position(unsigned slot, bool dst);
 void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
 void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
 void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
@@ -158,13 +158,6 @@ struct edma_rsv_info {
 
 /* platform_data for EDMA driver */
 struct edma_soc_info {
-
-	/* how many dma resources of each type */
-	unsigned	n_channel;
-	unsigned	n_region;
-	unsigned	n_slot;
-	unsigned	n_tc;
-	unsigned	n_cc;
 	/*
 	 * Default queue is expected to be a low-priority queue.
 	 * This way, long transfers on the default queue started
@@ -175,7 +168,6 @@ struct edma_soc_info {
 	/* Resource reservation for other cores */
 	struct edma_rsv_info	*rsv;
 
-	s8	(*queue_tc_mapping)[2];
 	s8	(*queue_priority_mapping)[2];
 	const s16	(*xbar_chans)[2];
 };