Merge branch 'merge'

37 files changed, 1746 insertions, 464 deletions

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 3c62e66e1fcc..8c48b8a27b9c 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1196,7 +1196,7 @@ platforms are moved over to use the flattened-device-tree model.
     - model : Model of the device.  Can be "TSEC", "eTSEC", or "FEC"
     - compatible : Should be "gianfar"
     - reg : Offset and length of the register set for the device
-    - address : List of bytes representing the ethernet address of
+    - mac-address : List of bytes representing the ethernet address of
       this controller
     - interrupts : <a b> where a is the interrupt number and b is a
       field that represents an encoding of the sense and level
@@ -1216,7 +1216,7 @@ platforms are moved over to use the flattened-device-tree model.
 		model = "TSEC";
 		compatible = "gianfar";
 		reg = <24000 1000>;
-		address = [ 00 E0 0C 00 73 00 ];
+		mac-address = [ 00 E0 0C 00 73 00 ];
 		interrupts = <d 3 e 3 12 3>;
 		interrupt-parent = <40000>;
 		phy-handle = <2452000>
@@ -1498,7 +1498,7 @@ not necessary as they are usually the same as the root node.
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <24000 1000>;
-			address = [ 00 E0 0C 00 73 00 ];
+			mac-address = [ 00 E0 0C 00 73 00 ];
 			interrupts = <d 3 e 3 12 3>;
 			interrupt-parent = <40000>;
 			phy-handle = <2452000>;
@@ -1511,7 +1511,7 @@ not necessary as they are usually the same as the root node.
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <25000 1000>;
-			address = [ 00 E0 0C 00 73 01 ];
+			mac-address = [ 00 E0 0C 00 73 01 ];
 			interrupts = <13 3 14 3 18 3>;
 			interrupt-parent = <40000>;
 			phy-handle = <2452001>;
@@ -1524,7 +1524,7 @@ not necessary as they are usually the same as the root node.
 			model = "FEC";
 			compatible = "gianfar";
 			reg = <26000 1000>;
-			address = [ 00 E0 0C 00 73 02 ];
+			mac-address = [ 00 E0 0C 00 73 02 ];
 			interrupts = <19 3>;
 			interrupt-parent = <40000>;
 			phy-handle = <2452002>;
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 7f782b338e8e..78414afb0c56 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -837,9 +837,10 @@ config MCA
 	bool
 
 config PCI
-	bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) \
-				  || MPC7448HPC2
-	default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !PPC_85xx && !PPC_86xx
+	bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \
+		|| PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) || MPC7448HPC2
+	default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx \
+		&& !PPC_85xx && !PPC_86xx
 	default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
 	default PCI_QSPAN if !4xx && !CPM2 && 8xx
 	help
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
new file mode 100644
index 000000000000..5f41c1f7a5f3
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -0,0 +1,257 @@
+/*
+ * MPC8540 ADS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+	model = "MPC8540ADS";
+	compatible = "MPC85xxADS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	linux,phandle = <100>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		linux,phandle = <200>;
+
+		PowerPC,8540@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;	//  33 MHz, from uboot
+			bus-frequency = <0>;	// 166 MHz
+			clock-frequency = <0>;	// 825 MHz, from uboot
+			32-bit;
+			linux,phandle = <201>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		linux,phandle = <300>;
+		reg = <00000000 08000000>;	// 128M at 0x0
+	};
+
+	soc8540@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00100000>;	// CCSRBAR 1M
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <1b 2>;
+			interrupt-parent = <40000>;
+			dfsrr;
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			linux,phandle = <24520>;
+			ethernet-phy@0 {
+				linux,phandle = <2452000>;
+				interrupt-parent = <40000>;
+				interrupts = <35 1>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <40000>;
+				interrupts = <35 1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@3 {
+				linux,phandle = <2452003>;
+				interrupt-parent = <40000>;
+				interrupts = <37 1>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			address = [ 00 E0 0C 00 73 00 ];
+			local-mac-address = [ 00 E0 0C 00 73 00 ];
+			interrupts = <d 2 e 2 12 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452000>;
+		};
+
+		ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			address = [ 00 E0 0C 00 73 01 ];
+			local-mac-address = [ 00 E0 0C 00 73 01 ];
+			interrupts = <13 2 14 2 18 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452001>;
+		};
+
+		ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "FEC";
+			compatible = "gianfar";
+			reg = <26000 1000>;
+			address = [ 00 E0 0C 00 73 02 ];
+			local-mac-address = [ 00 E0 0C 00 73 02 ];
+			interrupts = <19 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452003>;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+		pci@8000 {
+			linux,phandle = <8000>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x02 */
+				1000 0 0 1 40000 31 1
+				1000 0 0 2 40000 32 1
+				1000 0 0 3 40000 33 1
+				1000 0 0 4 40000 34 1
+
+				/* IDSEL 0x03 */
+				1800 0 0 1 40000 34 1
+				1800 0 0 2 40000 31 1
+				1800 0 0 3 40000 32 1
+				1800 0 0 4 40000 33 1
+
+				/* IDSEL 0x04 */
+				2000 0 0 1 40000 33 1
+				2000 0 0 2 40000 34 1
+				2000 0 0 3 40000 31 1
+				2000 0 0 4 40000 32 1
+
+				/* IDSEL 0x05 */
+				2800 0 0 1 40000 32 1
+				2800 0 0 2 40000 33 1
+				2800 0 0 3 40000 34 1
+				2800 0 0 4 40000 31 1
+
+				/* IDSEL 0x0c */
+				6000 0 0 1 40000 31 1
+				6000 0 0 2 40000 32 1
+				6000 0 0 3 40000 33 1
+				6000 0 0 4 40000 34 1
+
+				/* IDSEL 0x0d */
+				6800 0 0 1 40000 34 1
+				6800 0 0 2 40000 31 1
+				6800 0 0 3 40000 32 1
+				6800 0 0 4 40000 33 1
+
+				/* IDSEL 0x0e */
+				7000 0 0 1 40000 33 1
+				7000 0 0 2 40000 34 1
+				7000 0 0 3 40000 31 1
+				7000 0 0 4 40000 32 1
+
+				/* IDSEL 0x0f */
+				7800 0 0 1 40000 32 1
+				7800 0 0 2 40000 33 1
+				7800 0 0 3 40000 34 1
+				7800 0 0 4 40000 31 1
+
+				/* IDSEL 0x12 */
+				9000 0 0 1 40000 31 1
+				9000 0 0 2 40000 32 1
+				9000 0 0 3 40000 33 1
+				9000 0 0 4 40000 34 1
+
+				/* IDSEL 0x13 */
+				9800 0 0 1 40000 34 1
+				9800 0 0 2 40000 31 1
+				9800 0 0 3 40000 32 1
+				9800 0 0 4 40000 33 1
+
+				/* IDSEL 0x14 */
+				a000 0 0 1 40000 33 1
+				a000 0 0 2 40000 34 1
+				a000 0 0 3 40000 31 1
+				a000 0 0 4 40000 32 1
+
+				/* IDSEL 0x15 */
+				a800 0 0 1 40000 32 1
+				a800 0 0 2 40000 33 1
+				a800 0 0 3 40000 34 1
+				a800 0 0 4 40000 31 1>;
+			interrupt-parent = <40000>;
+			interrupts = <08 2>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 80000000 80000000 0 20000000
+				  01000000 0 00000000 e2000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8000 1000>;
+			compatible = "85xx";
+			device_type = "pci";
+		};
+
+		pic@40000 {
+			linux,phandle = <40000>;
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <40000 40000>;
+			built-in;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+			big-endian;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
new file mode 100644
index 000000000000..7be0bc659e1c
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -0,0 +1,244 @@
+/*
+ * MPC8541 CDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+	model = "MPC8541CDS";
+	compatible = "MPC85xxCDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	linux,phandle = <100>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		linux,phandle = <200>;
+
+		PowerPC,8541@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;	//  33 MHz, from uboot
+			bus-frequency = <0>;	// 166 MHz
+			clock-frequency = <0>;	// 825 MHz, from uboot
+			32-bit;
+			linux,phandle = <201>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		linux,phandle = <300>;
+		reg = <00000000 08000000>;	// 128M at 0x0
+	};
+
+	soc8541@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00100000>;	// CCSRBAR 1M
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <1b 2>;
+			interrupt-parent = <40000>;
+			dfsrr;
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			linux,phandle = <24520>;
+			ethernet-phy@0 {
+				linux,phandle = <2452000>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 00 ];
+			interrupts = <d 2 e 2 12 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452000>;
+		};
+
+		ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 01 ];
+			interrupts = <13 2 14 2 18 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452001>;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		pci@8000 {
+			linux,phandle = <8000>;
+			interrupt-map-mask = <1f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x10 */
+				08000 0 0 1 40000 30 1
+				08000 0 0 2 40000 31 1
+				08000 0 0 3 40000 32 1
+				08000 0 0 4 40000 33 1
+
+				/* IDSEL 0x11 */
+				08800 0 0 1 40000 30 1
+				08800 0 0 2 40000 31 1
+				08800 0 0 3 40000 32 1
+				08800 0 0 4 40000 33 1
+
+				/* IDSEL 0x12 (Slot 1) */
+				09000 0 0 1 40000 30 1
+				09000 0 0 2 40000 31 1
+				09000 0 0 3 40000 32 1
+				09000 0 0 4 40000 33 1
+
+				/* IDSEL 0x13 (Slot 2) */
+				09800 0 0 1 40000 31 1
+				09800 0 0 2 40000 32 1
+				09800 0 0 3 40000 33 1
+				09800 0 0 4 40000 30 1
+
+				/* IDSEL 0x14 (Slot 3) */
+				0a000 0 0 1 40000 32 1
+				0a000 0 0 2 40000 33 1
+				0a000 0 0 3 40000 30 1
+				0a000 0 0 4 40000 31 1
+
+				/* IDSEL 0x15 (Slot 4) */
+				0a800 0 0 1 40000 33 1
+				0a800 0 0 2 40000 30 1
+				0a800 0 0 3 40000 31 1
+				0a800 0 0 4 40000 32 1
+
+				/* Bus 1 (Tundra Bridge) */
+				/* IDSEL 0x12 (ISA bridge) */
+				19000 0 0 1 40000 30 1
+				19000 0 0 2 40000 31 1
+				19000 0 0 3 40000 32 1
+				19000 0 0 4 40000 33 1>;
+			interrupt-parent = <40000>;
+			interrupts = <08 2>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 80000000 80000000 0 20000000
+				  01000000 0 00000000 e2000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8000 1000>;
+			compatible = "85xx";
+			device_type = "pci";
+
+			i8259@19000 {
+				clock-frequency = <0>;
+				interrupt-controller;
+				device_type = "interrupt-controller";
+				reg = <19000 0 0 0 1>;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				built-in;
+				compatible = "chrp,iic";
+				big-endian;
+				interrupts = <1>;
+				interrupt-parent = <8000>;
+			};
+		};
+
+		pci@9000 {
+			linux,phandle = <9000>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x15 */
+				a800 0 0 1 40000 3b 1
+				a800 0 0 2 40000 3b 1
+				a800 0 0 3 40000 3b 1
+				a800 0 0 4 40000 3b 1>;
+			interrupt-parent = <40000>;
+			interrupts = <09 2>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 a0000000 a0000000 0 20000000
+				  01000000 0 00000000 e3000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <9000 1000>;
+			compatible = "85xx";
+			device_type = "pci";
+		};
+
+		pic@40000 {
+			linux,phandle = <40000>;
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <40000 40000>;
+			built-in;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+                        big-endian;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
new file mode 100644
index 000000000000..893d7957c174
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -0,0 +1,287 @@
+/*
+ * MPC8555 CDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+	model = "MPC8548CDS";
+	compatible = "MPC85xxCDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	linux,phandle = <100>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		linux,phandle = <200>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;	//  33 MHz, from uboot
+			bus-frequency = <0>;	// 166 MHz
+			clock-frequency = <0>;	// 825 MHz, from uboot
+			32-bit;
+			linux,phandle = <201>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		linux,phandle = <300>;
+		reg = <00000000 08000000>;	// 128M at 0x0
+	};
+
+	soc8548@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00100000>;	// CCSRBAR 1M
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <1b 2>;
+			interrupt-parent = <40000>;
+			dfsrr;
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			linux,phandle = <24520>;
+			ethernet-phy@0 {
+				linux,phandle = <2452000>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+
+			ethernet-phy@2 {
+				linux,phandle = <2452002>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@3 {
+				linux,phandle = <2452003>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 00 ];
+			interrupts = <d 2 e 2 12 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452000>;
+		};
+
+		ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 01 ];
+			interrupts = <13 2 14 2 18 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452001>;
+		};
+
+		ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <26000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 02 ];
+			interrupts = <f 2 10 2 11 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452001>;
+		};
+
+/* eTSEC 4 is currently broken
+		ethernet@27000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <27000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 03 ];
+			interrupts = <15 2 16 2 17 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452001>;
+		};
+ */
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		pci@8000 {
+			linux,phandle = <8000>;
+			interrupt-map-mask = <1f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x10 */
+				08000 0 0 1 40000 30 1
+				08000 0 0 2 40000 31 1
+				08000 0 0 3 40000 32 1
+				08000 0 0 4 40000 33 1
+
+				/* IDSEL 0x11 */
+				08800 0 0 1 40000 30 1
+				08800 0 0 2 40000 31 1
+				08800 0 0 3 40000 32 1
+				08800 0 0 4 40000 33 1
+
+				/* IDSEL 0x12 (Slot 1) */
+				09000 0 0 1 40000 30 1
+				09000 0 0 2 40000 31 1
+				09000 0 0 3 40000 32 1
+				09000 0 0 4 40000 33 1
+
+				/* IDSEL 0x13 (Slot 2) */
+				09800 0 0 1 40000 31 1
+				09800 0 0 2 40000 32 1
+				09800 0 0 3 40000 33 1
+				09800 0 0 4 40000 30 1
+
+				/* IDSEL 0x14 (Slot 3) */
+				0a000 0 0 1 40000 32 1
+				0a000 0 0 2 40000 33 1
+				0a000 0 0 3 40000 30 1
+				0a000 0 0 4 40000 31 1
+
+				/* IDSEL 0x15 (Slot 4) */
+				0a800 0 0 1 40000 33 1
+				0a800 0 0 2 40000 30 1
+				0a800 0 0 3 40000 31 1
+				0a800 0 0 4 40000 32 1
+
+				/* Bus 1 (Tundra Bridge) */
+				/* IDSEL 0x12 (ISA bridge) */
+				19000 0 0 1 40000 30 1
+				19000 0 0 2 40000 31 1
+				19000 0 0 3 40000 32 1
+				19000 0 0 4 40000 33 1>;
+			interrupt-parent = <40000>;
+			interrupts = <08 2>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 80000000 80000000 0 20000000
+				  01000000 0 00000000 e2000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8000 1000>;
+			compatible = "85xx";
+			device_type = "pci";
+
+			i8259@19000 {
+				clock-frequency = <0>;
+				interrupt-controller;
+				device_type = "interrupt-controller";
+				reg = <19000 0 0 0 1>;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				built-in;
+				compatible = "chrp,iic";
+				big-endian;
+				interrupts = <1>;
+				interrupt-parent = <8000>;
+			};
+		};
+
+		pci@9000 {
+			linux,phandle = <9000>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x15 */
+				a800 0 0 1 40000 3b 1
+				a800 0 0 2 40000 3b 1
+				a800 0 0 3 40000 3b 1
+				a800 0 0 4 40000 3b 1>;
+			interrupt-parent = <40000>;
+			interrupts = <09 2>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 a0000000 a0000000 0 20000000
+				  01000000 0 00000000 e3000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <9000 1000>;
+			compatible = "85xx";
+			device_type = "pci";
+		};
+
+		pic@40000 {
+			linux,phandle = <40000>;
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <40000 40000>;
+			built-in;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+                        big-endian;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
new file mode 100644
index 000000000000..118f5a887651
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -0,0 +1,244 @@
+/*
+ * MPC8555 CDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+	model = "MPC8555CDS";
+	compatible = "MPC85xxCDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	linux,phandle = <100>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		linux,phandle = <200>;
+
+		PowerPC,8555@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;	//  33 MHz, from uboot
+			bus-frequency = <0>;	// 166 MHz
+			clock-frequency = <0>;	// 825 MHz, from uboot
+			32-bit;
+			linux,phandle = <201>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		linux,phandle = <300>;
+		reg = <00000000 08000000>;	// 128M at 0x0
+	};
+
+	soc8555@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00100000>;	// CCSRBAR 1M
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <1b 2>;
+			interrupt-parent = <40000>;
+			dfsrr;
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			linux,phandle = <24520>;
+			ethernet-phy@0 {
+				linux,phandle = <2452000>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 00 ];
+			interrupts = <0d 2 0e 2 12 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452000>;
+		};
+
+		ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 01 ];
+			interrupts = <13 2 14 2 18 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452001>;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		pci@8000 {
+			linux,phandle = <8000>;
+			interrupt-map-mask = <1f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x10 */
+				08000 0 0 1 40000 30 1
+				08000 0 0 2 40000 31 1
+				08000 0 0 3 40000 32 1
+				08000 0 0 4 40000 33 1
+
+				/* IDSEL 0x11 */
+				08800 0 0 1 40000 30 1
+				08800 0 0 2 40000 31 1
+				08800 0 0 3 40000 32 1
+				08800 0 0 4 40000 33 1
+
+				/* IDSEL 0x12 (Slot 1) */
+				09000 0 0 1 40000 30 1
+				09000 0 0 2 40000 31 1
+				09000 0 0 3 40000 32 1
+				09000 0 0 4 40000 33 1
+
+				/* IDSEL 0x13 (Slot 2) */
+				09800 0 0 1 40000 31 1
+				09800 0 0 2 40000 32 1
+				09800 0 0 3 40000 33 1
+				09800 0 0 4 40000 30 1
+
+				/* IDSEL 0x14 (Slot 3) */
+				0a000 0 0 1 40000 32 1
+				0a000 0 0 2 40000 33 1
+				0a000 0 0 3 40000 30 1
+				0a000 0 0 4 40000 31 1
+
+				/* IDSEL 0x15 (Slot 4) */
+				0a800 0 0 1 40000 33 1
+				0a800 0 0 2 40000 30 1
+				0a800 0 0 3 40000 31 1
+				0a800 0 0 4 40000 32 1
+
+				/* Bus 1 (Tundra Bridge) */
+				/* IDSEL 0x12 (ISA bridge) */
+				19000 0 0 1 40000 30 1
+				19000 0 0 2 40000 31 1
+				19000 0 0 3 40000 32 1
+				19000 0 0 4 40000 33 1>;
+			interrupt-parent = <40000>;
+			interrupts = <08 2>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 80000000 80000000 0 20000000
+				  01000000 0 00000000 e2000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8000 1000>;
+			compatible = "85xx";
+			device_type = "pci";
+
+			i8259@19000 {
+				clock-frequency = <0>;
+				interrupt-controller;
+				device_type = "interrupt-controller";
+				reg = <19000 0 0 0 1>;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				built-in;
+				compatible = "chrp,iic";
+				big-endian;
+				interrupts = <1>;
+				interrupt-parent = <8000>;
+			};
+		};
+
+		pci@9000 {
+			linux,phandle = <9000>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x15 */
+				a800 0 0 1 40000 3b 1
+				a800 0 0 2 40000 3b 1
+				a800 0 0 3 40000 3b 1
+				a800 0 0 4 40000 3b 1>;
+			interrupt-parent = <40000>;
+			interrupts = <09 2>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 a0000000 a0000000 0 20000000
+				  01000000 0 00000000 e3000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <9000 1000>;
+			compatible = "85xx";
+			device_type = "pci";
+		};
+
+		pic@40000 {
+			linux,phandle = <40000>;
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <40000 40000>;
+			built-in;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+                        big-endian;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index e832a884d765..f0c7731743ea 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -293,6 +293,7 @@
 				f800 0 0 4 4d0 0 0
 				>;
 			i8259@4d0 {
+				linux,phandle = <4d0>;
 				clock-frequency = <0>;
 				interrupt-controller;
 				device_type = "interrupt-controller";
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index a45627547d03..8c6bd17c6929 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,16 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc1
-# Wed Apr 19 13:24:37 2006
+# Linux kernel version: 2.6.18-rc3
+# Tue Aug  8 09:12:29 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
@@ -33,6 +35,7 @@ CONFIG_PPC_STD_MMU=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -50,6 +53,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
@@ -67,10 +71,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -116,12 +122,16 @@ CONFIG_PPC_PMAC=y
 CONFIG_PPC_PMAC64=y
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_U3_DART=y
 CONFIG_MPIC=y
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_MPIC_BROKEN_U3=y
 # CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_970_NAP=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
@@ -153,6 +163,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
 # CONFIG_HOTPLUG_CPU is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
@@ -168,6 +179,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
 # CONFIG_PPC_64K_PAGES is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
@@ -184,6 +196,7 @@ CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -227,6 +240,8 @@ CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -239,6 +254,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -263,6 +279,7 @@ CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 # CONFIG_IP_NF_PPTP is not set
 # CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
 CONFIG_IP_NF_QUEUE=m
 
 #
@@ -318,6 +335,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -355,6 +373,7 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -417,7 +436,6 @@ CONFIG_IDEDMA_PCI_AUTO=y
 CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
-# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_IVB is not set
@@ -478,6 +496,7 @@ CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_SATA_MV is not set
 # CONFIG_SCSI_SATA_NV is not set
 # CONFIG_SCSI_PDC_ADMA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_SATA_QSTOR is not set
 # CONFIG_SCSI_SATA_PROMISE is not set
 # CONFIG_SCSI_SATA_SX4 is not set
@@ -497,7 +516,6 @@ CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
@@ -514,9 +532,7 @@ CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-CONFIG_MD_RAID6=m
+# CONFIG_MD_RAID456 is not set
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
@@ -559,7 +575,6 @@ CONFIG_IEEE1394_OHCI1394=y
 #
 CONFIG_IEEE1394_VIDEO1394=m
 CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
 CONFIG_IEEE1394_ETH1394=m
 CONFIG_IEEE1394_DV1394=m
 CONFIG_IEEE1394_RAWIO=y
@@ -573,6 +588,7 @@ CONFIG_IEEE1394_RAWIO=y
 # Macintosh device drivers
 #
 CONFIG_ADB_PMU=y
+# CONFIG_ADB_PMU_LED is not set
 CONFIG_PMAC_SMU=y
 CONFIG_THERM_PM72=y
 CONFIG_WINDFARM=y
@@ -643,6 +659,7 @@ CONFIG_TIGON3=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -739,6 +756,7 @@ CONFIG_SERIO=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -754,6 +772,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
 
 #
 # IPMI
@@ -764,6 +783,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
@@ -774,6 +794,7 @@ CONFIG_GEN_RTC=y
 # Ftape, the floppy tape device driver
 #
 CONFIG_AGP=m
+# CONFIG_AGP_SIS is not set
 # CONFIG_AGP_VIA is not set
 CONFIG_AGP_UNINORTH=m
 # CONFIG_DRM is not set
@@ -813,6 +834,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
@@ -849,7 +871,6 @@ CONFIG_I2C_POWERMAC=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -865,6 +886,7 @@ CONFIG_I2C_POWERMAC=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -875,22 +897,19 @@ CONFIG_I2C_POWERMAC=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_MACMODES=y
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
 CONFIG_FB_OF=y
-# CONFIG_FB_CONTROL is not set
-# CONFIG_FB_PLATINUM is not set
-# CONFIG_FB_VALKYRIE is not set
-# CONFIG_FB_CT65550 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 # CONFIG_FB_VGA16 is not set
@@ -990,6 +1009,18 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1027,6 +1058,17 @@ CONFIG_SND_POWERMAC=m
 CONFIG_SND_POWERMAC_AUTO_DRC=y
 
 #
+# Apple Onboard Audio driver
+#
+CONFIG_SND_AOA=m
+CONFIG_SND_AOA_FABRIC_LAYOUT=m
+CONFIG_SND_AOA_ONYX=m
+CONFIG_SND_AOA_TAS=m
+CONFIG_SND_AOA_TOONIE=m
+CONFIG_SND_AOA_SOUNDBUS=m
+CONFIG_SND_AOA_SOUNDBUS_I2S=m
+
+#
 # USB devices
 #
 CONFIG_SND_USB_AUDIO=m
@@ -1060,6 +1102,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
@@ -1110,9 +1153,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -1155,6 +1196,7 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
@@ -1162,6 +1204,7 @@ CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
@@ -1191,9 +1234,11 @@ CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
 CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 CONFIG_USB_SERIAL_TI=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EZUSB=y
 
@@ -1207,10 +1252,12 @@ CONFIG_USB_EZUSB=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+CONFIG_USB_APPLEDISPLAY=m
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
@@ -1235,6 +1282,14 @@ CONFIG_USB_EZUSB=y
 # CONFIG_NEW_LEDS is not set
 
 #
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
@@ -1249,6 +1304,19 @@ CONFIG_USB_EZUSB=y
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1273,7 +1341,6 @@ CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
@@ -1282,6 +1349,7 @@ CONFIG_XFS_POSIX_ACL=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
@@ -1363,7 +1431,9 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
 # CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1444,6 +1514,9 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -1457,14 +1530,19 @@ CONFIG_OPROFILE=y
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
@@ -1476,11 +1554,7 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_DEBUGGER is not set
 CONFIG_IRQSTACKS=y
 CONFIG_BOOTX_TEXT=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index a95e455a1944..72ed95b3ead6 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -1,16 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc1
-# Wed Apr 19 11:46:44 2006
+# Linux kernel version: 2.6.18-rc3
+# Tue Aug  8 09:15:46 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
@@ -34,6 +36,7 @@ CONFIG_PPC_STD_MMU=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=32
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -51,6 +54,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 CONFIG_AUDIT=y
 CONFIG_AUDITSYSCALL=y
@@ -69,10 +73,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -113,10 +119,14 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_PPC_ISERIES=y
 # CONFIG_EMBEDDED6xx is not set
 # CONFIG_APUS is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_IBMVIO=y
 # CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
 
@@ -135,6 +145,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_LPARCFG=y
 # CONFIG_NUMA is not set
@@ -149,6 +160,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
 # CONFIG_PPC_64K_PAGES is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
@@ -164,6 +176,7 @@ CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -207,6 +220,8 @@ CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -219,6 +234,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -246,9 +262,11 @@ CONFIG_NETFILTER_XT_MATCH_MARK=m
 # CONFIG_NETFILTER_XT_MATCH_POLICY is not set
 # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
@@ -267,6 +285,7 @@ CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 # CONFIG_IP_NF_PPTP is not set
 # CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
@@ -360,6 +379,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -396,6 +416,7 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -453,6 +474,7 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -464,7 +486,6 @@ CONFIG_SCSI_IBMVSCSI=m
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
@@ -481,9 +502,7 @@ CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-CONFIG_MD_RAID6=m
+# CONFIG_MD_RAID456 is not set
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
@@ -596,6 +615,7 @@ CONFIG_E1000=m
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -696,6 +716,7 @@ CONFIG_SERIAL_ICOM=m
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
 
 #
 # IPMI
@@ -706,6 +727,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
@@ -741,7 +763,6 @@ CONFIG_MAX_RAW_DEVS=256
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -757,6 +778,7 @@ CONFIG_MAX_RAW_DEVS=256
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -766,7 +788,9 @@ CONFIG_MAX_RAW_DEVS=256
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -801,6 +825,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_NEW_LEDS is not set
 
 #
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
@@ -815,6 +847,19 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -843,7 +888,6 @@ CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
@@ -852,6 +896,7 @@ CONFIG_XFS_POSIX_ACL=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
@@ -933,8 +978,10 @@ CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1013,10 +1060,12 @@ CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
 #
+# CONFIG_PROFILING is not set
 # CONFIG_KPROBES is not set
 
 #
@@ -1024,14 +1073,19 @@ CONFIG_TEXTSEARCH_FSM=m
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
@@ -1042,11 +1096,7 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUGGER is not set
 CONFIG_IRQSTACKS=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 31708ad4574e..c18e8600d78f 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc4
-# Sun May 28 07:26:56 2006
+# Linux kernel version: 2.6.18-rc3
+# Tue Aug  8 09:14:48 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -35,6 +36,7 @@ CONFIG_PPC_STD_MMU=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=128
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -52,6 +54,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 CONFIG_AUDIT=y
 CONFIG_AUDITSYSCALL=y
@@ -70,10 +73,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -118,6 +123,9 @@ CONFIG_PPC_PSERIES=y
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_XICS=y
 # CONFIG_U3_DART is not set
 CONFIG_MPIC=y
@@ -149,6 +157,7 @@ CONFIG_BINFMT_MISC=m
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
 CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
@@ -173,6 +182,7 @@ CONFIG_SPARSEMEM_EXTREME=y
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 # CONFIG_PPC_64K_PAGES is not set
 CONFIG_SCHED_SMT=y
@@ -190,6 +200,7 @@ CONFIG_PPC_I8259=y
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -238,6 +249,8 @@ CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -250,6 +263,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -277,6 +291,7 @@ CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 # CONFIG_IP_NF_PPTP is not set
 # CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
 CONFIG_IP_NF_QUEUE=m
 
 #
@@ -316,6 +331,7 @@ CONFIG_LLC=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -332,6 +348,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -352,6 +369,7 @@ CONFIG_PARPORT_PC=m
 # CONFIG_PARPORT_PC_FIFO is not set
 # CONFIG_PARPORT_PC_SUPERIO is not set
 # CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
 # CONFIG_PARPORT_1284 is not set
 
 #
@@ -376,6 +394,7 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -487,6 +506,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -508,12 +528,6 @@ CONFIG_SCSI_IPR_TRACE=y
 CONFIG_SCSI_IPR_DUMP=y
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA_FC=m
-CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA24XX=m
 CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -528,9 +542,7 @@ CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_RAID6=m
+# CONFIG_MD_RAID456 is not set
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
@@ -651,6 +663,7 @@ CONFIG_IXGB=m
 # CONFIG_IXGB_NAPI is not set
 CONFIG_S2IO=m
 # CONFIG_S2IO_NAPI is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -754,6 +767,7 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -776,6 +790,7 @@ CONFIG_SERIAL_JSM=m
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
 # CONFIG_PRINTER is not set
 # CONFIG_PPDEV is not set
 # CONFIG_TIPAR is not set
@@ -793,6 +808,7 @@ CONFIG_HVCS=m
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
@@ -839,6 +855,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -876,7 +893,6 @@ CONFIG_I2C_ALGOBIT=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -892,6 +908,7 @@ CONFIG_I2C_ALGOBIT=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -902,19 +919,19 @@ CONFIG_I2C_ALGOBIT=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_MACMODES=y
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
 CONFIG_FB_OF=y
-# CONFIG_FB_CT65550 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 # CONFIG_FB_VGA16 is not set
@@ -993,6 +1010,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
@@ -1083,10 +1101,12 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
@@ -1124,12 +1144,14 @@ CONFIG_USB_MON=y
 CONFIG_INFINIBAND=m
 CONFIG_INFINIBAND_USER_MAD=m
 CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INFINIBAND_MTHCA_DEBUG=y
 CONFIG_INFINIBAND_IPOIB=m
 CONFIG_INFINIBAND_IPOIB_DEBUG=y
 # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
 CONFIG_INFINIBAND_SRP=m
+# CONFIG_INFINIBAND_ISER is not set
 
 #
 # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
@@ -1141,6 +1163,19 @@ CONFIG_INFINIBAND_SRP=m
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1169,15 +1204,16 @@ CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
 CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -1259,8 +1295,10 @@ CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1326,6 +1364,9 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -1339,14 +1380,19 @@ CONFIG_KPROBES=y
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index bcf50031a92a..d2ab2943d230 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -67,9 +67,9 @@ pci64-$(CONFIG_PPC64)		+= pci_64.o pci_dn.o pci_iommu.o \
 				   pci_direct_iommu.o iomap.o
 pci32-$(CONFIG_PPC32)		:= pci_32.o
 obj-$(CONFIG_PCI)		+= $(pci64-y) $(pci32-y)
-kexec-$(CONFIG_PPC64)		:= machine_kexec_64.o crash.o
+kexec-$(CONFIG_PPC64)		:= machine_kexec_64.o
 kexec-$(CONFIG_PPC32)		:= machine_kexec_32.o
-obj-$(CONFIG_KEXEC)		+= machine_kexec.o $(kexec-y)
+obj-$(CONFIG_KEXEC)		+= machine_kexec.o crash.o $(kexec-y)
 
 ifeq ($(CONFIG_PPC_ISERIES),y)
 $(obj)/head_64.o: $(obj)/lparmap.s
diff --git a/arch/powerpc/kernel/cpu_setup_ppc970.S b/arch/powerpc/kernel/cpu_setup_ppc970.S
index f619932794e8..652594891d58 100644
--- a/arch/powerpc/kernel/cpu_setup_ppc970.S
+++ b/arch/powerpc/kernel/cpu_setup_ppc970.S
@@ -81,6 +81,8 @@ _GLOBAL(__setup_cpu_ppc970)
 	mfspr	r0,SPRN_HID0
 	li	r11,5			/* clear DOZE and SLEEP */
 	rldimi	r0,r11,52,8		/* set NAP and DPM */
+	li	r11,0
+	rldimi	r0,r11,32,31		/* clear EN_ATTN */
 	mtspr	SPRN_HID0,r0
 	mfspr	r0,SPRN_HID0
 	mfspr	r0,SPRN_HID0
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index 358cecdc6aef..f04c18e08b8b 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -44,6 +44,7 @@
 /* This keeps a track of which one is crashing cpu. */
 int crashing_cpu = -1;
 static cpumask_t cpus_in_crash = CPU_MASK_NONE;
+cpumask_t cpus_in_sr = CPU_MASK_NONE;
 
 static u32 *append_elf_note(u32 *buf, char *name, unsigned type, void *data,
 							       size_t data_len)
@@ -139,7 +140,13 @@ void crash_ipi_callback(struct pt_regs *regs)
 
 	if (ppc_md.kexec_cpu_down)
 		ppc_md.kexec_cpu_down(1, 1);
+
+#ifdef CONFIG_PPC64
 	kexec_smp_wait();
+#else
+	for (;;);	/* FIXME */
+#endif
+
 	/* NOTREACHED */
 }
 
@@ -255,7 +262,11 @@ static void crash_kexec_prepare_cpus(int cpu)
 	 *
 	 * do this if kexec in setup.c ?
 	 */
+#ifdef CONFIG_PPC64
 	smp_release_cpus();
+#else
+	/* FIXME */
+#endif
 }
 
 void crash_kexec_secondary(struct pt_regs *regs)
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index b2ded6460a86..fd4ddb858dbd 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -694,7 +694,7 @@ unsigned int irq_radix_revmap(struct irq_host *host,
 	/* If not there, try to insert it */
 	virq = irq_find_mapping(host, hwirq);
 	if (virq != NO_IRQ)
-		radix_tree_insert(tree, virq, &irq_map[virq]);
+		radix_tree_insert(tree, hwirq, &irq_map[virq]);
  bail:
 	spin_unlock_irqrestore(&irq_big_lock, flags);
 	return virq;
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index 9f0898c89759..cd65c367b8b6 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -61,6 +61,8 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 	if (!ret) {
 		memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
 		p->opcode = *p->addr;
+		flush_icache_range((unsigned long)p->ainsn.insn,
+			(unsigned long)p->ainsn.insn + sizeof(kprobe_opcode_t));
 	}
 
 	return ret;
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index ee1e0b8c7f1f..5e6ddfa474c0 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -116,6 +116,7 @@ static int __init add_legacy_soc_port(struct device_node *np,
 	u64 addr;
 	const u32 *addrp;
 	upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+	struct device_node *tsi = of_get_parent(np);
 
 	/* We only support ports that have a clock frequency properly
 	 * encoded in the device-tree.
@@ -135,7 +136,10 @@ static int __init add_legacy_soc_port(struct device_node *np,
 	/* Add port, irq will be dealt with later. We passed a translated
 	 * IO port value. It will be fixed up later along with the irq
 	 */
-	return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0);
+	if (tsi && !strcmp(tsi->type, "tsi-bridge"))
+		return add_legacy_port(np, -1, UPIO_TSI, addr, addr, NO_IRQ, flags, 0);
+	else
+		return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0);
 }
 
 static int __init add_legacy_isa_port(struct device_node *np,
@@ -465,7 +469,7 @@ static int __init serial_dev_init(void)
 			fixup_port_irq(i, np, port);
 		if (port->iotype == UPIO_PORT)
 			fixup_port_pio(i, np, port);
-		if (port->iotype == UPIO_MEM)
+		if ((port->iotype == UPIO_MEM) || (port->iotype == UPIO_TSI))
 			fixup_port_mmio(i, np, port);
 	}
 
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index a81ca1b841ec..e60a0c544d63 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -13,6 +13,7 @@
 #include <linux/reboot.h>
 #include <linux/threads.h>
 #include <asm/machdep.h>
+#include <asm/lmb.h>
 
 void machine_crash_shutdown(struct pt_regs *regs)
 {
@@ -59,3 +60,58 @@ NORET_TYPE void machine_kexec(struct kimage *image)
 	}
 	for(;;);
 }
+
+static int __init early_parse_crashk(char *p)
+{
+	unsigned long size;
+
+	if (!p)
+		return 1;
+
+	size = memparse(p, &p);
+
+	if (*p == '@')
+		crashk_res.start = memparse(p + 1, &p);
+	else
+		crashk_res.start = KDUMP_KERNELBASE;
+
+	crashk_res.end = crashk_res.start + size - 1;
+
+	return 0;
+}
+early_param("crashkernel", early_parse_crashk);
+
+void __init reserve_crashkernel(void)
+{
+	unsigned long size;
+
+	if (crashk_res.start == 0)
+		return;
+
+	/* We might have got these values via the command line or the
+	 * device tree, either way sanitise them now. */
+
+	size = crashk_res.end - crashk_res.start + 1;
+
+	if (crashk_res.start != KDUMP_KERNELBASE)
+		printk("Crash kernel location must be 0x%x\n",
+				KDUMP_KERNELBASE);
+
+	crashk_res.start = KDUMP_KERNELBASE;
+	size = PAGE_ALIGN(size);
+	crashk_res.end = crashk_res.start + size - 1;
+
+	/* Crash kernel trumps memory limit */
+	if (memory_limit && memory_limit <= crashk_res.end) {
+		memory_limit = crashk_res.end + 1;
+		printk("Adjusted memory limit for crashkernel, now 0x%lx\n",
+				memory_limit);
+	}
+
+	lmb_reserve(crashk_res.start, size);
+}
+
+int overlaps_crashkernel(unsigned long start, unsigned long size)
+{
+	return (start + size) > crashk_res.start && start <= crashk_res.end;
+}
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index 4efdaa9d3f43..a24b09c27718 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -10,7 +10,6 @@
  */
 
 
-#include <linux/cpumask.h>
 #include <linux/kexec.h>
 #include <linux/smp.h>
 #include <linux/thread_info.h>
@@ -21,7 +20,6 @@
 #include <asm/machdep.h>
 #include <asm/cacheflush.h>
 #include <asm/paca.h>
-#include <asm/lmb.h>
 #include <asm/mmu.h>
 #include <asm/sections.h>	/* _end */
 #include <asm/prom.h>
@@ -383,58 +381,3 @@ static int __init kexec_setup(void)
 	return 0;
 }
 __initcall(kexec_setup);
-
-static int __init early_parse_crashk(char *p)
-{
-	unsigned long size;
-
-	if (!p)
-		return 1;
-
-	size = memparse(p, &p);
-
-	if (*p == '@')
-		crashk_res.start = memparse(p + 1, &p);
-	else
-		crashk_res.start = KDUMP_KERNELBASE;
-
-	crashk_res.end = crashk_res.start + size - 1;
-
-	return 0;
-}
-early_param("crashkernel", early_parse_crashk);
-
-void __init reserve_crashkernel(void)
-{
-	unsigned long size;
-
-	if (crashk_res.start == 0)
-		return;
-
-	/* We might have got these values via the command line or the
-	 * device tree, either way sanitise them now. */
-
-	size = crashk_res.end - crashk_res.start + 1;
-
-	if (crashk_res.start != KDUMP_KERNELBASE)
-		printk("Crash kernel location must be 0x%x\n",
-				KDUMP_KERNELBASE);
-
-	crashk_res.start = KDUMP_KERNELBASE;
-	size = PAGE_ALIGN(size);
-	crashk_res.end = crashk_res.start + size - 1;
-
-	/* Crash kernel trumps memory limit */
-	if (memory_limit && memory_limit <= crashk_res.end) {
-		memory_limit = crashk_res.end + 1;
-		printk("Adjusted memory limit for crashkernel, now 0x%lx\n",
-				memory_limit);
-	}
-
-	lmb_reserve(crashk_res.start, size);
-}
-
-int overlaps_crashkernel(unsigned long start, unsigned long size)
-{
-	return (start + size) > crashk_res.start && start <= crashk_res.end;
-}
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 59f69d34cb67..603203276ef6 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -601,11 +601,6 @@ static struct device_node *of_irq_find_parent(struct device_node *child)
 	return p;
 }
 
-static u8 of_irq_pci_swizzle(u8 slot, u8 pin)
-{
-	return (((pin - 1) + slot) % 4) + 1;
-}
-
 /* This doesn't need to be called if you don't have any special workaround
  * flags to pass
  */
@@ -895,6 +890,12 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq
 }
 EXPORT_SYMBOL_GPL(of_irq_map_one);
 
+#ifdef CONFIG_PCI
+static u8 of_irq_pci_swizzle(u8 slot, u8 pin)
+{
+	return (((pin - 1) + slot) % 4) + 1;
+}
+
 int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
 {
 	struct device_node *dn, *ppnode;
@@ -971,4 +972,4 @@ int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
 	return of_irq_map_raw(ppnode, &lspec, laddr, out_irq);
 }
 EXPORT_SYMBOL_GPL(of_irq_map_pci);
-
+#endif /* CONFIG_PCI */
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 8d4ccf061a4d..272cb826901d 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -417,7 +417,7 @@ static __inline__ void timer_check_rtc(void)
 /*
  * This version of gettimeofday has microsecond resolution.
  */
-static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val)
+static inline void __do_gettimeofday(struct timeval *tv)
 {
 	unsigned long sec, usec;
 	u64 tb_ticks, xsec;
@@ -431,7 +431,12 @@ static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val)
 	 * without a divide (and in fact, without a multiply)
 	 */
 	temp_varp = do_gtod.varp;
-	tb_ticks = tb_val - temp_varp->tb_orig_stamp;
+
+	/* Sampling the time base must be done after loading
+	 * do_gtod.varp in order to avoid racing with update_gtod.
+	 */
+	data_barrier(temp_varp);
+	tb_ticks = get_tb() - temp_varp->tb_orig_stamp;
 	temp_tb_to_xs = temp_varp->tb_to_xs;
 	temp_stamp_xsec = temp_varp->stamp_xsec;
 	xsec = temp_stamp_xsec + mulhdu(tb_ticks, temp_tb_to_xs);
@@ -464,7 +469,7 @@ void do_gettimeofday(struct timeval *tv)
 		tv->tv_usec = usec;
 		return;
 	}
-	__do_gettimeofday(tv, get_tb());
+	__do_gettimeofday(tv);
 }
 
 EXPORT_SYMBOL(do_gettimeofday);
@@ -650,6 +655,7 @@ void timer_interrupt(struct pt_regs * regs)
 	int next_dec;
 	int cpu = smp_processor_id();
 	unsigned long ticks;
+	u64 tb_next_jiffy;
 
 #ifdef CONFIG_PPC32
 	if (atomic_read(&ppc_n_lost_interrupts) != 0)
@@ -691,11 +697,14 @@ void timer_interrupt(struct pt_regs * regs)
 			continue;
 
 		write_seqlock(&xtime_lock);
-		tb_last_jiffy += tb_ticks_per_jiffy;
-		tb_last_stamp = per_cpu(last_jiffy, cpu);
-		do_timer(regs);
-		timer_recalc_offset(tb_last_jiffy);
-		timer_check_rtc();
+		tb_next_jiffy = tb_last_jiffy + tb_ticks_per_jiffy;
+		if (per_cpu(last_jiffy, cpu) >= tb_next_jiffy) {
+			tb_last_jiffy = tb_next_jiffy;
+			tb_last_stamp = per_cpu(last_jiffy, cpu);
+			do_timer(regs);
+			timer_recalc_offset(tb_last_jiffy);
+			timer_check_rtc();
+		}
 		write_sequnlock(&xtime_lock);
 	}
 	
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 2105767fcc57..4d0b4e74d579 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -55,9 +55,6 @@
 
 #ifdef CONFIG_PPC64	/* XXX */
 #define _IO_BASE	pci_io_base
-#ifdef CONFIG_KEXEC
-cpumask_t cpus_in_sr = CPU_MASK_NONE;
-#endif
 #endif
 
 #ifdef CONFIG_DEBUGGER
@@ -211,6 +208,19 @@ void system_reset_exception(struct pt_regs *regs)
 
 	die("System Reset", regs, SIGABRT);
 
+	/*
+	 * Some CPUs when released from the debugger will execute this path.
+	 * These CPUs entered the debugger via a soft-reset. If the CPU was
+	 * hung before entering the debugger it will return to the hung
+	 * state when exiting this function.  This causes a problem in
+	 * kdump since the hung CPU(s) will not respond to the IPI sent
+	 * from kdump. To prevent the problem we call crash_kexec_secondary()
+	 * here. If a kdump had not been initiated or we exit the debugger
+	 * with the "exit and recover" command (x) crash_kexec_secondary()
+	 * will return after 5ms and the CPU returns to its previous state.
+	 */
+	crash_kexec_secondary(regs);
+
 	/* Must die if the interrupt is not recoverable */
 	if (!(regs->msr & MSR_RI))
 		panic("Unrecoverable System Reset");
@@ -575,14 +585,14 @@ static void parse_fpe(struct pt_regs *regs)
 #define INST_MFSPR_PVR_MASK	0xfc1fffff
 
 #define INST_DCBA		0x7c0005ec
-#define INST_DCBA_MASK		0x7c0007fe
+#define INST_DCBA_MASK		0xfc0007fe
 
 #define INST_MCRXR		0x7c000400
-#define INST_MCRXR_MASK		0x7c0007fe
+#define INST_MCRXR_MASK		0xfc0007fe
 
 #define INST_STRING		0x7c00042a
-#define INST_STRING_MASK	0x7c0007fe
-#define INST_STRING_GEN_MASK	0x7c00067e
+#define INST_STRING_MASK	0xfc0007fe
+#define INST_STRING_GEN_MASK	0xfc00067e
 #define INST_LSWI		0x7c0004aa
 #define INST_LSWX		0x7c00042a
 #define INST_STSWI		0x7c0005aa
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 266b8b2ceac9..5615acc29527 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -153,7 +153,7 @@ static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp)
 	hpdp->pd = 0;
 	tlb->need_flush = 1;
 	pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM,
-						 HUGEPTE_TABLE_SIZE-1));
+						 PGF_CACHENUM_MASK));
 }
 
 #ifdef CONFIG_PPC_64K_PAGES
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 454fc53289ab..c3268d9877e4 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -14,7 +14,6 @@ config MPC8540_ADS
 config MPC85xx_CDS
 	bool "Freescale MPC85xx CDS"
 	select DEFAULT_UIMAGE
-	select PPC_I8259 if PCI
 	help
 	  This option enables support for the MPC85xx CDS board
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index d0cfcdb1d1b5..cae6b73357d5 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -37,79 +37,7 @@ unsigned long isa_io_base = 0;
 unsigned long isa_mem_base = 0;
 #endif
 
-/*
- * Internal interrupts are all Level Sensitive, and Positive Polarity
- *
- * Note:  Likely, this table and the following function should be
- *        obtained and derived from the OF Device Tree.
- */
-static u_char mpc85xx_ads_openpic_initsenses[] __initdata = {
-	MPC85XX_INTERNAL_IRQ_SENSES,
-	0x0,			/* External  0: */
-#if defined(CONFIG_PCI)
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext 1: PCI slot 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext 2: PCI slot 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext 3: PCI slot 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext 4: PCI slot 3 */
-#else
-	0x0,			/* External  1: */
-	0x0,			/* External  2: */
-	0x0,			/* External  3: */
-	0x0,			/* External  4: */
-#endif
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 5: PHY */
-	0x0,			/* External  6: */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 7: PHY */
-	0x0,			/* External  8: */
-	0x0,			/* External  9: */
-	0x0,			/* External 10: */
-	0x0,			/* External 11: */
-};
-
 #ifdef CONFIG_PCI
-/*
- * interrupt routing
- */
-
-int
-mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     * This is little evil, but works around the fact
-	     * that revA boards have IDSEL starting at 18
-	     * and others boards (older) start at 12
-	     *
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *       A      B      C      D
-	     */
-	{
-		{PIRQA, PIRQB, PIRQC, PIRQD},	/* IDSEL 2 */
-		{PIRQD, PIRQA, PIRQB, PIRQC},
-		{PIRQC, PIRQD, PIRQA, PIRQB},
-		{PIRQB, PIRQC, PIRQD, PIRQA},	/* IDSEL 5 */
-		{0, 0, 0, 0},	/* -- */
-		{0, 0, 0, 0},	/* -- */
-		{0, 0, 0, 0},	/* -- */
-		{0, 0, 0, 0},	/* -- */
-		{0, 0, 0, 0},	/* -- */
-		{0, 0, 0, 0},	/* -- */
-		{PIRQA, PIRQB, PIRQC, PIRQD},	/* IDSEL 12 */
-		{PIRQD, PIRQA, PIRQB, PIRQC},
-		{PIRQC, PIRQD, PIRQA, PIRQB},
-		{PIRQB, PIRQC, PIRQD, PIRQA},	/* IDSEL 15 */
-		{0, 0, 0, 0},	/* -- */
-		{0, 0, 0, 0},	/* -- */
-		{PIRQA, PIRQB, PIRQC, PIRQD},	/* IDSEL 18 */
-		{PIRQD, PIRQA, PIRQB, PIRQC},
-		{PIRQC, PIRQD, PIRQA, PIRQB},
-		{PIRQB, PIRQC, PIRQD, PIRQA},	/* IDSEL 21 */
-	};
-
-	const long min_idsel = 2, max_idsel = 21, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
 int
 mpc85xx_exclude_device(u_char bus, u_char devfn)
 {
@@ -119,44 +47,63 @@ mpc85xx_exclude_device(u_char bus, u_char devfn)
 		return PCIBIOS_SUCCESSFUL;
 }
 
+void __init
+mpc85xx_pcibios_fixup(void)
+{
+	struct pci_dev *dev = NULL;
+
+	for_each_pci_dev(dev)
+		pci_read_irq_line(dev);
+}
 #endif /* CONFIG_PCI */
 
 
 void __init mpc85xx_ads_pic_init(void)
 {
-	struct mpic *mpic1;
-	phys_addr_t OpenPIC_PAddr;
-
-	/* Determine the Physical Address of the OpenPIC regs */
-	OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET;
-
-	mpic1 = mpic_alloc(OpenPIC_PAddr,
-			   MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
-			   4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250,
-			   mpc85xx_ads_openpic_initsenses,
-			   sizeof(mpc85xx_ads_openpic_initsenses),
-			   " OpenPIC  ");
-	BUG_ON(mpic1 == NULL);
-	mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200);
-	mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280);
-	mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300);
-	mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380);
-	mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400);
-	mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480);
-	mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500);
-	mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580);
-
-	/* dummy mappings to get to 48 */
-	mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600);
-	mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680);
-	mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700);
-	mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780);
-
-	/* External ints */
-	mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000);
-	mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080);
-	mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100);
-	mpic_init(mpic1);
+	struct mpic *mpic;
+	struct resource r;
+	struct device_node *np = NULL;
+
+	np = of_find_node_by_type(np, "open-pic");
+
+	if (np == NULL) {
+		printk(KERN_ERR "Could not find open-pic node\n");
+		return;
+	}
+
+	if(of_address_to_resource(np, 0, &r)) {
+		printk(KERN_ERR "Could not map mpic register space\n");
+		of_node_put(np);
+		return;
+	}
+
+	mpic = mpic_alloc(np, r.start,
+			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+			4, 0, " OpenPIC  ");
+	BUG_ON(mpic == NULL);
+	of_node_put(np);
+
+	mpic_assign_isu(mpic, 0, r.start + 0x10200);
+	mpic_assign_isu(mpic, 1, r.start + 0x10280);
+	mpic_assign_isu(mpic, 2, r.start + 0x10300);
+	mpic_assign_isu(mpic, 3, r.start + 0x10380);
+	mpic_assign_isu(mpic, 4, r.start + 0x10400);
+	mpic_assign_isu(mpic, 5, r.start + 0x10480);
+	mpic_assign_isu(mpic, 6, r.start + 0x10500);
+	mpic_assign_isu(mpic, 7, r.start + 0x10580);
+
+	/* Unused on this platform (leave room for 8548) */
+	mpic_assign_isu(mpic, 8, r.start + 0x10600);
+	mpic_assign_isu(mpic, 9, r.start + 0x10680);
+	mpic_assign_isu(mpic, 10, r.start + 0x10700);
+	mpic_assign_isu(mpic, 11, r.start + 0x10780);
+
+	/* External Interrupts */
+	mpic_assign_isu(mpic, 12, r.start + 0x10000);
+	mpic_assign_isu(mpic, 13, r.start + 0x10080);
+	mpic_assign_isu(mpic, 14, r.start + 0x10100);
+
+	mpic_init(mpic);
 }
 
 /*
@@ -165,7 +112,9 @@ void __init mpc85xx_ads_pic_init(void)
 static void __init mpc85xx_ads_setup_arch(void)
 {
 	struct device_node *cpu;
+#ifdef CONFIG_PCI
 	struct device_node *np;
+#endif
 
 	if (ppc_md.progress)
 		ppc_md.progress("mpc85xx_ads_setup_arch()", 0);
@@ -186,8 +135,7 @@ static void __init mpc85xx_ads_setup_arch(void)
 	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
 		add_bridge(np);
 
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = mpc85xx_map_irq;
+	ppc_md.pcibios_fixup = mpc85xx_pcibios_fixup;
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 5fd53eba6912..4c1fede6470e 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -57,94 +57,8 @@ unsigned long isa_mem_base = 0;
 static int cds_pci_slot = 2;
 static volatile u8 *cadmus;
 
-/*
- * Internal interrupts are all Level Sensitive, and Positive Polarity
- *
- * Note:  Likely, this table and the following function should be
- *        obtained and derived from the OF Device Tree.
- */
-static u_char mpc85xx_cds_openpic_initsenses[] __initdata = {
-	MPC85XX_INTERNAL_IRQ_SENSES,
-#if defined(CONFIG_PCI)
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Ext 0: PCI slot 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext 1: PCI slot 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext 2: PCI slot 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext 3: PCI slot 3 */
-#else
-	0x0,				/* External  0: */
-	0x0,				/* External  1: */
-	0x0,				/* External  2: */
-	0x0,				/* External  3: */
-#endif
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 5: PHY */
-	0x0,				/* External  6: */
-	0x0,				/* External  7: */
-	0x0,				/* External  8: */
-	0x0,				/* External  9: */
-	0x0,				/* External 10: */
-#ifdef CONFIG_PCI
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),    /* Ext 11: PCI2 slot 0 */
-#else
-	0x0,				/* External 11: */
-#endif
-};
-
 
 #ifdef CONFIG_PCI
-/*
- * interrupt routing
- */
-int
-mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-
-	if (!hose->index)
-	{
-		/* Handle PCI1 interrupts */
-		char pci_irq_table[][4] =
-			/*
-			 *      PCI IDSEL/INTPIN->INTLINE
-			 *        A      B      C      D
-			 */
-
-			/* Note IRQ assignment for slots is based on which slot the elysium is
-			 * in -- in this setup elysium is in slot #2 (this PIRQA as first
-			 * interrupt on slot */
-		{
-			{ 0, 1, 2, 3 }, /* 16 - PMC */
-			{ 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */
-			{ 0, 1, 2, 3 }, /* 18 - Slot 1 */
-			{ 1, 2, 3, 0 }, /* 19 - Slot 2 */
-			{ 2, 3, 0, 1 }, /* 20 - Slot 3 */
-			{ 3, 0, 1, 2 }, /* 21 - Slot 4 */
-		};
-
-		const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4;
-		int i, j;
-
-		for (i = 0; i < 6; i++)
-			for (j = 0; j < 4; j++)
-				pci_irq_table[i][j] =
-					((pci_irq_table[i][j] + 5 -
-					  cds_pci_slot) & 0x3) + PIRQ0A;
-
-		return PCI_IRQ_TABLE_LOOKUP;
-	} else {
-		/* Handle PCI2 interrupts (if we have one) */
-		char pci_irq_table[][4] =
-		{
-			/*
-			 * We only have one slot and one interrupt
-			 * going to PIRQA - PIRQD */
-			{ PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */
-		};
-
-		const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4;
-
-		return PCI_IRQ_TABLE_LOOKUP;
-	}
-}
 
 #define ARCADIA_HOST_BRIDGE_IDSEL	17
 #define ARCADIA_2ND_BRIDGE_IDSEL	3
@@ -210,50 +124,104 @@ mpc85xx_cds_pcibios_fixup(void)
 		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
 		pci_dev_put(dev);
 	}
+
+	/* Now map all the PCI irqs */
+	dev = NULL;
+	for_each_pci_dev(dev)
+		pci_read_irq_line(dev);
+}
+
+#ifdef CONFIG_PPC_I8259
+#warning The i8259 PIC support is currently broken
+static void mpc85xx_8259_cascade(unsigned int irq, struct
+		irq_desc *desc, struct pt_regs *regs)
+{
+	unsigned int cascade_irq = i8259_irq(regs);
+
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq, regs);
+
+	desc->chip->eoi(irq);
 }
+#endif /* PPC_I8259 */
 #endif /* CONFIG_PCI */
 
 void __init mpc85xx_cds_pic_init(void)
 {
-	struct mpic *mpic1;
-	phys_addr_t OpenPIC_PAddr;
+	struct mpic *mpic;
+	struct resource r;
+	struct device_node *np = NULL;
+	struct device_node *cascade_node = NULL;
+	int cascade_irq;
 
-	/* Determine the Physical Address of the OpenPIC regs */
-	OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET;
+	np = of_find_node_by_type(np, "open-pic");
+
+	if (np == NULL) {
+		printk(KERN_ERR "Could not find open-pic node\n");
+		return;
+	}
 
-	mpic1 = mpic_alloc(OpenPIC_PAddr,
+	if (of_address_to_resource(np, 0, &r)) {
+		printk(KERN_ERR "Failed to map mpic register space\n");
+		of_node_put(np);
+		return;
+	}
+
+	mpic = mpic_alloc(np, r.start,
 			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
-			4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250,
-			mpc85xx_cds_openpic_initsenses,
-			sizeof(mpc85xx_cds_openpic_initsenses), " OpenPIC  ");
-	BUG_ON(mpic1 == NULL);
-	mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200);
-	mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280);
-	mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300);
-	mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380);
-	mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400);
-	mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480);
-	mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500);
-	mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580);
-
-	/* dummy mappings to get to 48 */
-	mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600);
-	mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680);
-	mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700);
-	mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780);
-
-	/* External ints */
-	mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000);
-	mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080);
-	mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100);
-
-	mpic_init(mpic1);
+			4, 0, " OpenPIC  ");
+	BUG_ON(mpic == NULL);
+
+	/* Return the mpic node */
+	of_node_put(np);
+
+	mpic_assign_isu(mpic, 0, r.start + 0x10200);
+	mpic_assign_isu(mpic, 1, r.start + 0x10280);
+	mpic_assign_isu(mpic, 2, r.start + 0x10300);
+	mpic_assign_isu(mpic, 3, r.start + 0x10380);
+	mpic_assign_isu(mpic, 4, r.start + 0x10400);
+	mpic_assign_isu(mpic, 5, r.start + 0x10480);
+	mpic_assign_isu(mpic, 6, r.start + 0x10500);
+	mpic_assign_isu(mpic, 7, r.start + 0x10580);
+
+	/* Used only for 8548 so far, but no harm in
+	 * allocating them for everyone */
+	mpic_assign_isu(mpic, 8, r.start + 0x10600);
+	mpic_assign_isu(mpic, 9, r.start + 0x10680);
+	mpic_assign_isu(mpic, 10, r.start + 0x10700);
+	mpic_assign_isu(mpic, 11, r.start + 0x10780);
+
+	/* External Interrupts */
+	mpic_assign_isu(mpic, 12, r.start + 0x10000);
+	mpic_assign_isu(mpic, 13, r.start + 0x10080);
+	mpic_assign_isu(mpic, 14, r.start + 0x10100);
+
+	mpic_init(mpic);
+
+#ifdef CONFIG_PPC_I8259
+	/* Initialize the i8259 controller */
+	for_each_node_by_type(np, "interrupt-controller")
+		if (device_is_compatible(np, "chrp,iic")) {
+			cascade_node = np;
+			break;
+		}
+
+	if (cascade_node == NULL) {
+		printk(KERN_DEBUG "Could not find i8259 PIC\n");
+		return;
+	}
 
-#ifdef CONFIG_PCI
-	mpic_setup_cascade(PIRQ0A, i8259_irq_cascade, NULL);
+	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
+	if (cascade_irq == NO_IRQ) {
+		printk(KERN_ERR "Failed to map cascade interrupt\n");
+		return;
+	}
 
-	i8259_init(0,0);
-#endif
+	i8259_init(cascade_node, 0);
+	of_node_put(cascade_node);
+
+	set_irq_chained_handler(cascade_irq, mpc85xx_8259_cascade);
+#endif /* CONFIG_PPC_I8259 */
 }
 
 
@@ -298,8 +266,6 @@ mpc85xx_cds_setup_arch(void)
 		add_bridge(np);
 
 	ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup;
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = mpc85xx_map_irq;
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
 
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 496cc7c3a54c..8e4331013243 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -68,37 +68,36 @@ mpc86xx_hpcn_init_irq(void)
 {
 	struct mpic *mpic1;
 	struct device_node *np;
-	phys_addr_t openpic_paddr;
+	struct resource res;
 #ifdef CONFIG_PCI
 	struct device_node *cascade_node = NULL;
 	int cascade_irq;
 #endif
 
+	/* Determine PIC address. */
 	np = of_find_node_by_type(NULL, "open-pic");
 	if (np == NULL)
 		return;
-
-	/* Determine the Physical Address of the OpenPIC regs */
-	openpic_paddr = get_immrbase() + MPC86xx_OPENPIC_OFFSET;
+	of_address_to_resource(np, 0, &res);
 
 	/* Alloc mpic structure and per isu has 16 INT entries. */
-	mpic1 = mpic_alloc(np, openpic_paddr,
+	mpic1 = mpic_alloc(np, res.start,
 			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
 			16, NR_IRQS - 4,
 			" MPIC     ");
 	BUG_ON(mpic1 == NULL);
 
-	mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10000);
+	mpic_assign_isu(mpic1, 0, res.start + 0x10000);
 
 	/* 48 Internal Interrupts */
-	mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10200);
-	mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10400);
-	mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10600);
+	mpic_assign_isu(mpic1, 1, res.start + 0x10200);
+	mpic_assign_isu(mpic1, 2, res.start + 0x10400);
+	mpic_assign_isu(mpic1, 3, res.start + 0x10600);
 
 	/* 16 External interrupts
 	 * Moving them from [0 - 15] to [64 - 79]
 	 */
-	mpic_assign_isu(mpic1, 4, openpic_paddr + 0x10000);
+	mpic_assign_isu(mpic1, 4, res.start + 0x10000);
 
 	mpic_init(mpic1);
 
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index 69c998cb4f1b..673ee69c62e3 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -1,7 +1,7 @@
 /*
  * mpc7448_hpc2.c
  *
- * Board setup routines for the Freescale Taiga platform
+ * Board setup routines for the Freescale mpc7448hpc2(taiga) platform
  *
  * Author: Jacob Pan
  *	 jacob.pan@freescale.com
@@ -12,10 +12,10 @@
  *
  * Copyright 2004-2006 Freescale Semiconductor, Inc.
  *
- * This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
  */
 
 #include <linux/config.h>
@@ -62,43 +62,8 @@ pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET;
 extern int tsi108_setup_pci(struct device_node *dev);
 extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
 extern void tsi108_pci_int_init(void);
-extern int tsi108_irq_cascade(struct pt_regs *regs, void *unused);
-
-/*
- * Define all of the IRQ senses and polarities.  Taken from the
- * mpc7448hpc  manual.
- * Note:  Likely, this table and the following function should be
- *        obtained and derived from the OF Device Tree.
- */
-
-static u_char mpc7448_hpc2_pic_initsenses[] __initdata = {
-	/* External on-board sources */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* INT[0] XINT0 from FPGA */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* INT[1] XINT1 from FPGA */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* INT[2] PHY_INT from both GIGE */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* INT[3] RESERVED */
-	/* Internal Tsi108/109 interrupt sources */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* Reserved IRQ */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* Reserved IRQ */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* Reserved IRQ */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* Reserved IRQ */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* DMA0 */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* DMA1 */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* DMA2 */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* DMA3 */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* UART0 */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* UART1 */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* I2C */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* GPIO */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* GIGE0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* GIGE1 */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* Reserved IRQ */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* HLP */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* SDC */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* Processor IF */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* Reserved IRQ */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* PCI/X block */
-};
+extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc,
+			    struct pt_regs *regs);
 
 int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn)
 {
@@ -229,6 +194,8 @@ static void __init mpc7448_hpc2_init_IRQ(void)
 {
 	struct mpic *mpic;
 	phys_addr_t mpic_paddr = 0;
+	unsigned int cascade_pci_irq;
+	struct device_node *tsi_pci;
 	struct device_node *tsi_pic;
 
 	tsi_pic = of_find_node_by_type(NULL, "open-pic");
@@ -246,24 +213,31 @@ static void __init mpc7448_hpc2_init_IRQ(void)
 	DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__,
 	    (u32) mpic_paddr);
 
-	mpic = mpic_alloc(mpic_paddr,
+	mpic = mpic_alloc(tsi_pic, mpic_paddr,
 			MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
 			MPIC_SPV_EOI | MPIC_MOD_ID(MPIC_ID_TSI108),
 			0, /* num_sources used */
-			TSI108_IRQ_BASE,
 			0, /* num_sources used */
-			NR_IRQS - 4 /* XXXX */,
-			mpc7448_hpc2_pic_initsenses,
-			sizeof(mpc7448_hpc2_pic_initsenses), "Tsi108_PIC");
+			"Tsi108_PIC");
 
 	BUG_ON(mpic == NULL); /* XXXX */
-
 	mpic_init(mpic);
-	mpic_setup_cascade(IRQ_TSI108_PCI, tsi108_irq_cascade, mpic);
+
+	tsi_pci = of_find_node_by_type(NULL, "pci");
+	if (tsi_pci == 0) {
+		printk("%s: No tsi108 pci node found !\n", __FUNCTION__);
+		return;
+	}
+
+	cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
+	set_irq_data(cascade_pci_irq, mpic);
+	set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade);
+
 	tsi108_pci_int_init();
 
 	/* Configure MPIC outputs to CPU0 */
 	tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
+	of_node_put(tsi_pic);
 }
 
 void mpc7448_hpc2_show_cpuinfo(struct seq_file *m)
@@ -320,6 +294,7 @@ static int mpc7448_machine_check_exception(struct pt_regs *regs)
 	return 0;
 
 }
+
 define_machine(mpc7448_hpc2){
 	.name 			= "MPC7448 HPC2",
 	.probe 			= mpc7448_hpc2_probe,
diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c
index 6a026c733f6a..9d73d0234c5d 100644
--- a/arch/powerpc/platforms/powermac/bootx_init.c
+++ b/arch/powerpc/platforms/powermac/bootx_init.c
@@ -411,8 +411,15 @@ static unsigned long __init bootx_flatten_dt(unsigned long start)
 	DBG("End of boot params: %x\n", mem_end);
 	rsvmap[0] = mem_start;
 	rsvmap[1] = mem_end;
-	rsvmap[2] = 0;
-	rsvmap[3] = 0;
+	if (bootx_info->ramDisk) {
+		rsvmap[2] = ((unsigned long)bootx_info) + bootx_info->ramDisk;
+		rsvmap[3] = rsvmap[2] + bootx_info->ramDiskSize;
+		rsvmap[4] = 0;
+		rsvmap[5] = 0;
+	} else {
+		rsvmap[2] = 0;
+		rsvmap[3] = 0;
+	}
 
 	return (unsigned long)hdr;
 }
@@ -543,12 +550,12 @@ void __init bootx_init(unsigned long r3, unsigned long r4)
 	 */
 	if (bi->version < 5) {
 		space = bi->deviceTreeOffset + bi->deviceTreeSize;
-		if (bi->ramDisk)
+		if (bi->ramDisk >= space)
 			space = bi->ramDisk + bi->ramDiskSize;
 	} else
 		space = bi->totalParamsSize;
 
-	bootx_printf("Total space used by parameters & ramdisk: %x \n", space);
+	bootx_printf("Total space used by parameters & ramdisk: 0x%x \n", space);
 
 	/* New BootX will have flushed all TLBs and enters kernel with
 	 * MMU switched OFF, so this should not be useful anymore.
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 4a6aa640ac13..92ba378b7990 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -166,8 +166,16 @@ static int __init gfar_of_init(void)
 			goto err;
 		}
 
-		mac_addr = get_property(np, "address", NULL);
-		memcpy(gfar_data.mac_addr, mac_addr, 6);
+		mac_addr = get_property(np, "local-mac-address", NULL);
+		if (mac_addr == NULL)
+			mac_addr = get_property(np, "mac-address", NULL);
+		if (mac_addr == NULL) {
+			/* Obsolete */
+			mac_addr = get_property(np, "address", NULL);
+		}
+
+		if (mac_addr)
+			memcpy(gfar_data.mac_addr, mac_addr, 6);
 
 		if (model && !strcasecmp(model, "TSEC"))
 			gfar_data.device_flags =
diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c
index 26a0cc820cde..f3038461d4c0 100644
--- a/arch/powerpc/sysdev/tsi108_dev.c
+++ b/arch/powerpc/sysdev/tsi108_dev.c
@@ -93,13 +93,15 @@ static int __init tsi108_eth_of_init(void)
 			goto err;
 
 		r[1].name = "tx";
-		r[1].start = np->intrs[0].line;
-		r[1].end = np->intrs[0].line;
+		r[1].start = irq_of_parse_and_map(np, 0);
+		r[1].end = irq_of_parse_and_map(np, 0);
 		r[1].flags = IORESOURCE_IRQ;
+		DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n",
+			__FUNCTION__,r[1].name, r[1].start, r[1].end);
 
 		tsi_eth_dev =
 		    platform_device_register_simple("tsi-ethernet", i, &r[0],
-						    np->n_intrs + 1);
+						    1);
 
 		if (IS_ERR(tsi_eth_dev)) {
 			ret = PTR_ERR(tsi_eth_dev);
@@ -127,7 +129,7 @@ static int __init tsi108_eth_of_init(void)
 		tsi_eth_data.regs = r[0].start;
 		tsi_eth_data.phyregs = res.start;
 		tsi_eth_data.phy = *phy_id;
-		tsi_eth_data.irq_num = np->intrs[0].line;
+		tsi_eth_data.irq_num = irq_of_parse_and_map(np, 0);
 		of_node_put(phy);
 		ret =
 		    platform_device_add_data(tsi_eth_dev, &tsi_eth_data,
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index f6c492f8ab95..c28f69bef8e2 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -26,7 +26,6 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 
-
 #include <asm/byteorder.h>
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -228,7 +227,7 @@ int __init tsi108_setup_pci(struct device_node *dev)
 
 	(hose)->ops = &tsi108_direct_pci_ops;
 
-	printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08lx. "
+	printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. "
 	       "Firmware bus number: %d->%d\n",
 	       rsrc.start, hose->first_busno, hose->last_busno);
 
@@ -278,7 +277,7 @@ static void init_pci_source(void)
 	mb();
 }
 
-static inline int get_pci_source(void)
+static inline unsigned int get_pci_source(void)
 {
 	u_int temp = 0;
 	int irq = -1;
@@ -371,12 +370,12 @@ static void tsi108_pci_irq_end(u_int irq)
  * Interrupt controller descriptor for cascaded PCI interrupt controller.
  */
 
-struct hw_interrupt_type tsi108_pci_irq = {
+static struct irq_chip tsi108_pci_irq = {
 	.typename = "tsi108_PCI_int",
-	.enable = tsi108_pci_irq_enable,
-	.disable = tsi108_pci_irq_disable,
+	.mask = tsi108_pci_irq_disable,
 	.ack = tsi108_pci_irq_ack,
 	.end = tsi108_pci_irq_end,
+	.unmask = tsi108_pci_irq_enable,
 };
 
 /*
@@ -399,14 +398,18 @@ void __init tsi108_pci_int_init(void)
 	DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
 
 	for (i = 0; i < NUM_PCI_IRQS; i++) {
-		irq_desc[i + IRQ_PCI_INTAD_BASE].handler = &tsi108_pci_irq;
+		irq_desc[i + IRQ_PCI_INTAD_BASE].chip = &tsi108_pci_irq;
 		irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL;
 	}
 
 	init_pci_source();
 }
 
-int tsi108_irq_cascade(struct pt_regs *regs, void *unused)
+void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc,
+			    struct pt_regs *regs)
 {
-	return get_pci_source();
+	unsigned int cascade_irq = get_pci_source();
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq, regs);
+	desc->chip->eoi(irq);
 }
diff --git a/include/asm-powerpc/kexec.h b/include/asm-powerpc/kexec.h
index 8f7fd5cfec34..11cbdf81fd2e 100644
--- a/include/asm-powerpc/kexec.h
+++ b/include/asm-powerpc/kexec.h
@@ -32,6 +32,7 @@
 #endif
 
 #ifndef __ASSEMBLY__
+#include <linux/cpumask.h>
 
 #ifdef CONFIG_KEXEC
 
@@ -109,7 +110,6 @@ static inline void crash_setup_regs(struct pt_regs *newregs,
 
 #define MAX_NOTE_BYTES 1024
 
-#ifdef __powerpc64__
 extern void kexec_smp_wait(void);	/* get and clear naca physid, wait for
 					  master to copy new code to 0 */
 extern int crashing_cpu;
@@ -119,7 +119,6 @@ static inline int kexec_sr_activated(int cpu)
 {
 	return cpu_isset(cpu,cpus_in_sr);
 }
-#endif /* __powerpc64 __ */
 
 struct kimage;
 struct pt_regs;
diff --git a/include/asm-powerpc/mpc86xx.h b/include/asm-powerpc/mpc86xx.h
index 2d6ad859df7f..b85df45b1a84 100644
--- a/include/asm-powerpc/mpc86xx.h
+++ b/include/asm-powerpc/mpc86xx.h
@@ -31,7 +31,6 @@
 #define MCM_PORT_CONFIG_OFFSET 0x1010
 
 /* Offset from CCSRBAR */
-#define MPC86xx_OPENPIC_OFFSET	(0x40000)
 #define MPC86xx_MCM_OFFSET      (0x00000)
 #define MPC86xx_MCM_SIZE        (0x02000)
 
diff --git a/include/asm-powerpc/pgalloc.h b/include/asm-powerpc/pgalloc.h
index 9f0917c68659..ae63db7b3e7d 100644
--- a/include/asm-powerpc/pgalloc.h
+++ b/include/asm-powerpc/pgalloc.h
@@ -117,7 +117,7 @@ static inline void pte_free(struct page *ptepage)
 	pte_free_kernel(page_address(ptepage));
 }
 
-#define PGF_CACHENUM_MASK	0xf
+#define PGF_CACHENUM_MASK	0x3
 
 typedef struct pgtable_free {
 	unsigned long val;
diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h
index b6d330fe8ed3..4b41deaa8d8d 100644
--- a/include/asm-powerpc/system.h
+++ b/include/asm-powerpc/system.h
@@ -53,6 +53,15 @@
 #define smp_read_barrier_depends()	do { } while(0)
 #endif /* CONFIG_SMP */
 
+/*
+ * This is a barrier which prevents following instructions from being
+ * started until the value of the argument x is known.  For example, if
+ * x is a variable loaded from memory, this prevents following
+ * instructions from being executed until the load has been performed.
+ */
+#define data_barrier(x)	\
+	asm volatile("twi 0,%0,0; isync" : : "r" (x) : "memory");
+
 struct task_struct;
 struct pt_regs;
 
diff --git a/include/asm-powerpc/tsi108.h b/include/asm-powerpc/tsi108.h
index c4c278d72f71..2c702d35a7cf 100644
--- a/include/asm-powerpc/tsi108.h
+++ b/include/asm-powerpc/tsi108.h
@@ -1,16 +1,18 @@
 /*
- * include/asm-ppc/tsi108.h
- *
  * common routine and memory layout for Tundra TSI108(Grendel) host bridge
  * memory controller.
  *
  * Author: Jacob Pan (jacob.pan@freescale.com)
  *	   Alex Bounine (alexandreb@tundra.com)
- * 2004 (c) Freescale Semiconductor Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ *
+ * Copyright 2004-2006 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
  */
+
 #ifndef __PPC_KERNEL_TSI108_H
 #define __PPC_KERNEL_TSI108_H
 
diff --git a/include/asm-powerpc/tsi108_irq.h b/include/asm-powerpc/tsi108_irq.h
new file mode 100644
index 000000000000..3e4d04effa57
--- /dev/null
+++ b/include/asm-powerpc/tsi108_irq.h
@@ -0,0 +1,124 @@
+/*
+ * (C) Copyright 2005 Tundra Semiconductor Corp.
+ * Alex Bounine, <alexandreb at tundra.com).
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * definitions for interrupt controller initialization and external interrupt
+ * demultiplexing on TSI108EMU/SVB boards.
+ */
+
+#ifndef _ASM_PPC_TSI108_IRQ_H
+#define _ASM_PPC_TSI108_IRQ_H
+
+/*
+ * Tsi108 interrupts
+ */
+#ifndef TSI108_IRQ_REG_BASE
+#define TSI108_IRQ_REG_BASE		0
+#endif
+
+#define TSI108_IRQ(x)		(TSI108_IRQ_REG_BASE + (x))
+
+#define TSI108_MAX_VECTORS	(36 + 4)	/* 36 sources + PCI INT demux */
+#define MAX_TASK_PRIO	0xF
+
+#define TSI108_IRQ_SPURIOUS	(TSI108_MAX_VECTORS)
+
+#define DEFAULT_PRIO_LVL	10	/* initial priority level */
+
+/* Interrupt vectors assignment to external and internal
+ * sources of requests. */
+
+/* EXTERNAL INTERRUPT SOURCES */
+
+#define IRQ_TSI108_EXT_INT0	TSI108_IRQ(0)	/* External Source at INT[0] */
+#define IRQ_TSI108_EXT_INT1	TSI108_IRQ(1)	/* External Source at INT[1] */
+#define IRQ_TSI108_EXT_INT2	TSI108_IRQ(2)	/* External Source at INT[2] */
+#define IRQ_TSI108_EXT_INT3	TSI108_IRQ(3)	/* External Source at INT[3] */
+
+/* INTERNAL INTERRUPT SOURCES */
+
+#define IRQ_TSI108_RESERVED0	TSI108_IRQ(4)	/* Reserved IRQ */
+#define IRQ_TSI108_RESERVED1	TSI108_IRQ(5)	/* Reserved IRQ */
+#define IRQ_TSI108_RESERVED2	TSI108_IRQ(6)	/* Reserved IRQ */
+#define IRQ_TSI108_RESERVED3	TSI108_IRQ(7)	/* Reserved IRQ */
+#define IRQ_TSI108_DMA0		TSI108_IRQ(8)	/* DMA0 */
+#define IRQ_TSI108_DMA1		TSI108_IRQ(9)	/* DMA1 */
+#define IRQ_TSI108_DMA2		TSI108_IRQ(10)	/* DMA2 */
+#define IRQ_TSI108_DMA3		TSI108_IRQ(11)	/* DMA3 */
+#define IRQ_TSI108_UART0	TSI108_IRQ(12)	/* UART0 */
+#define IRQ_TSI108_UART1	TSI108_IRQ(13)	/* UART1 */
+#define IRQ_TSI108_I2C		TSI108_IRQ(14)	/* I2C */
+#define IRQ_TSI108_GPIO		TSI108_IRQ(15)	/* GPIO */
+#define IRQ_TSI108_GIGE0	TSI108_IRQ(16)	/* GIGE0 */
+#define IRQ_TSI108_GIGE1	TSI108_IRQ(17)	/* GIGE1 */
+#define IRQ_TSI108_RESERVED4	TSI108_IRQ(18)	/* Reserved IRQ */
+#define IRQ_TSI108_HLP		TSI108_IRQ(19)	/* HLP */
+#define IRQ_TSI108_SDRAM	TSI108_IRQ(20)	/* SDC */
+#define IRQ_TSI108_PROC_IF	TSI108_IRQ(21)	/* Processor IF */
+#define IRQ_TSI108_RESERVED5	TSI108_IRQ(22)	/* Reserved IRQ */
+#define IRQ_TSI108_PCI		TSI108_IRQ(23)	/* PCI/X block */
+
+#define IRQ_TSI108_MBOX0	TSI108_IRQ(24)	/* Mailbox 0 register */
+#define IRQ_TSI108_MBOX1	TSI108_IRQ(25)	/* Mailbox 1 register */
+#define IRQ_TSI108_MBOX2	TSI108_IRQ(26)	/* Mailbox 2 register */
+#define IRQ_TSI108_MBOX3	TSI108_IRQ(27)	/* Mailbox 3 register */
+
+#define IRQ_TSI108_DBELL0	TSI108_IRQ(28)	/* Doorbell 0 */
+#define IRQ_TSI108_DBELL1	TSI108_IRQ(29)	/* Doorbell 1 */
+#define IRQ_TSI108_DBELL2	TSI108_IRQ(30)	/* Doorbell 2 */
+#define IRQ_TSI108_DBELL3	TSI108_IRQ(31)	/* Doorbell 3 */
+
+#define IRQ_TSI108_TIMER0	TSI108_IRQ(32)	/* Global Timer 0 */
+#define IRQ_TSI108_TIMER1	TSI108_IRQ(33)	/* Global Timer 1 */
+#define IRQ_TSI108_TIMER2	TSI108_IRQ(34)	/* Global Timer 2 */
+#define IRQ_TSI108_TIMER3	TSI108_IRQ(35)	/* Global Timer 3 */
+
+/*
+ * PCI bus INTA# - INTD# lines demultiplexor
+ */
+#define IRQ_PCI_INTAD_BASE	TSI108_IRQ(36)
+#define IRQ_PCI_INTA		(IRQ_PCI_INTAD_BASE + 0)
+#define IRQ_PCI_INTB		(IRQ_PCI_INTAD_BASE + 1)
+#define IRQ_PCI_INTC		(IRQ_PCI_INTAD_BASE + 2)
+#define IRQ_PCI_INTD		(IRQ_PCI_INTAD_BASE + 3)
+#define NUM_PCI_IRQS		(4)
+
+/* number of entries in vector dispatch table */
+#define IRQ_TSI108_TAB_SIZE	(TSI108_MAX_VECTORS + 1)
+
+/* Mapping of MPIC outputs to processors' interrupt pins */
+
+#define IDIR_INT_OUT0		0x1
+#define IDIR_INT_OUT1		0x2
+#define IDIR_INT_OUT2		0x4
+#define IDIR_INT_OUT3		0x8
+
+/*---------------------------------------------------------------
+ * IRQ line configuration parameters */
+
+/* Interrupt delivery modes */
+typedef enum {
+	TSI108_IRQ_DIRECTED,
+	TSI108_IRQ_DISTRIBUTED,
+} TSI108_IRQ_MODE;
+#endif				/*  _ASM_PPC_TSI108_IRQ_H */