Merge tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu updates from Joerg Roedel:

 - Big cleanup of almost unsused parts of the IOMMU API by Christoph
   Hellwig. This mostly affects the Freescale PAMU driver.

 - New IOMMU driver for Unisoc SOCs

 - ARM SMMU Updates from Will:
     - Drop vestigial PREFETCH_ADDR support (SMMUv3)
     - Elide TLB sync logic for empty gather (SMMUv3)
     - Fix "Service Failure Mode" handling (SMMUv3)
     - New Qualcomm compatible string (SMMUv2)

 - Removal of the AMD IOMMU performance counter writeable check on AMD.
   It caused long boot delays on some machines and is only needed to
   work around an errata on some older (possibly pre-production) chips.
   If someone is still hit by this hardware issue anyway the performance
   counters will just return 0.

 - Support for targeted invalidations in the AMD IOMMU driver. Before
   that the driver only invalidated a single 4k page or the whole IO/TLB
   for an address space. This has been extended now and is mostly useful
   for emulated AMD IOMMUs.

 - Several fixes for the Shared Virtual Memory support in the Intel VT-d
   driver

 - Mediatek drivers can now be built as modules

 - Re-introduction of the forcedac boot option which got lost when
   converting the Intel VT-d driver to the common dma-iommu
   implementation.

 - Extension of the IOMMU device registration interface and support
   iommu_ops to be const again when drivers are built as modules.

* tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (84 commits)
  iommu: Streamline registration interface
  iommu: Statically set module owner
  iommu/mediatek-v1: Add error handle for mtk_iommu_probe
  iommu/mediatek-v1: Avoid build fail when build as module
  iommu/mediatek: Always enable the clk on resume
  iommu/fsl-pamu: Fix uninitialized variable warning
  iommu/vt-d: Force to flush iotlb before creating superpage
  iommu/amd: Put newline after closing bracket in warning
  iommu/vt-d: Fix an error handling path in 'intel_prepare_irq_remapping()'
  iommu/vt-d: Fix build error of pasid_enable_wpe() with !X86
  iommu/amd: Remove performance counter pre-initialization test
  Revert "iommu/amd: Fix performance counter initialization"
  iommu/amd: Remove duplicate check of devid
  iommu/exynos: Remove unneeded local variable initialization
  iommu/amd: Page-specific invalidations for more than one page
  iommu/arm-smmu-v3: Remove the unused fields for PREFETCH_CONFIG command
  iommu/vt-d: Avoid unnecessary cache flush in pasid entry teardown
  iommu/vt-d: Invalidate PASID cache when root/context entry changed
  iommu/vt-d: Remove WO permissions on second-level paging entries
  iommu/vt-d: Report the right page fault address
  ...

1 files changed, 8 insertions, 7 deletions

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 1c0a3cf6fcc9..02470ba1fe6a 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1877,13 +1877,6 @@
 			bypassed by not enabling DMAR with this option. In
 			this case, gfx device will use physical address for
 			DMA.
-		forcedac [X86-64]
-			With this option iommu will not optimize to look
-			for io virtual address below 32-bit forcing dual
-			address cycle on pci bus for cards supporting greater
-			than 32-bit addressing. The default is to look
-			for translation below 32-bit and if not available
-			then look in the higher range.
 		strict [Default Off]
 			With this option on every unmap_single operation will
 			result in a hardware IOTLB flush operation as opposed
@@ -1972,6 +1965,14 @@
 		nobypass	[PPC/POWERNV]
 			Disable IOMMU bypass, using IOMMU for PCI devices.
 
+	iommu.forcedac=	[ARM64, X86] Control IOVA allocation for PCI devices.
+			Format: { "0" | "1" }
+			0 - Try to allocate a 32-bit DMA address first, before
+			  falling back to the full range if needed.
+			1 - Allocate directly from the full usable range,
+			  forcing Dual Address Cycle for PCI cards supporting
+			  greater than 32-bit addressing.
+
 	iommu.strict=	[ARM64] Configure TLB invalidation behaviour
 			Format: { "0" | "1" }
 			0 - Lazy mode.