Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

7 files changed, 249 insertions, 0 deletions

diff --git a/Documentation/aoe/aoe.txt b/Documentation/aoe/aoe.txt
new file mode 100644
index 000000000000..43e50108d0e2
--- /dev/null
+++ b/Documentation/aoe/aoe.txt
@@ -0,0 +1,91 @@
+The EtherDrive (R) HOWTO for users of 2.6 kernels is found at ...
+
+  http://www.coraid.com/support/linux/EtherDrive-2.6-HOWTO.html
+
+  It has many tips and hints!
+
+CREATING DEVICE NODES
+
+  Users of udev should find the block device nodes created
+  automatically, but to create all the necessary device nodes, use the
+  udev configuration rules provided in udev.txt (in this directory).
+
+  There is a udev-install.sh script that shows how to install these
+  rules on your system.
+
+  If you are not using udev, two scripts are provided in
+  Documentation/aoe as examples of static device node creation for
+  using the aoe driver.
+
+    rm -rf /dev/etherd
+    sh Documentation/aoe/mkdevs.sh /dev/etherd
+
+  ... or to make just one shelf's worth of block device nodes ...
+
+    sh Documentation/aoe/mkshelf.sh /dev/etherd 0
+
+  There is also an autoload script that shows how to edit
+  /etc/modprobe.conf to ensure that the aoe module is loaded when
+  necessary.
+
+USING DEVICE NODES
+
+  "cat /dev/etherd/err" blocks, waiting for error diagnostic output,
+  like any retransmitted packets.
+
+  "echo eth2 eth4 > /dev/etherd/interfaces" tells the aoe driver to
+  limit ATA over Ethernet traffic to eth2 and eth4.  AoE traffic from
+  untrusted networks should be ignored as a matter of security.
+
+  "echo > /dev/etherd/discover" tells the driver to find out what AoE
+  devices are available.
+
+  These character devices may disappear and be replaced by sysfs
+  counterparts, so distribution maintainers are encouraged to create
+  scripts that use these devices.
+
+  The block devices are named like this:
+
+	e{shelf}.{slot}
+	e{shelf}.{slot}p{part}
+
+  ... so that "e0.2" is the third blade from the left (slot 2) in the
+  first shelf (shelf address zero).  That's the whole disk.  The first
+  partition on that disk would be "e0.2p1".
+
+USING SYSFS
+
+  Each aoe block device in /sys/block has the extra attributes of
+  state, mac, and netif.  The state attribute is "up" when the device
+  is ready for I/O and "down" if detected but unusable.  The
+  "down,closewait" state shows that the device is still open and
+  cannot come up again until it has been closed.
+
+  The mac attribute is the ethernet address of the remote AoE device.
+  The netif attribute is the network interface on the localhost
+  through which we are communicating with the remote AoE device.
+
+  There is a script in this directory that formats this information
+  in a convenient way.
+
+  root@makki root# sh Documentation/aoe/status.sh 
+     e10.0            eth3              up
+     e10.1            eth3              up
+     e10.2            eth3              up
+     e10.3            eth3              up
+     e10.4            eth3              up
+     e10.5            eth3              up
+     e10.6            eth3              up
+     e10.7            eth3              up
+     e10.8            eth3              up
+     e10.9            eth3              up
+      e4.0            eth1              up
+      e4.1            eth1              up
+      e4.2            eth1              up
+      e4.3            eth1              up
+      e4.4            eth1              up
+      e4.5            eth1              up
+      e4.6            eth1              up
+      e4.7            eth1              up
+      e4.8            eth1              up
+      e4.9            eth1              up
diff --git a/Documentation/aoe/autoload.sh b/Documentation/aoe/autoload.sh
new file mode 100644
index 000000000000..78dad1334c6f
--- /dev/null
+++ b/Documentation/aoe/autoload.sh
@@ -0,0 +1,17 @@
+#!/bin/sh
+# set aoe to autoload by installing the
+# aliases in /etc/modprobe.conf
+
+f=/etc/modprobe.conf
+
+if test ! -r $f || test ! -w $f; then
+	echo "cannot configure $f for module autoloading" 1>&2
+	exit 1
+fi
+
+grep major-152 $f >/dev/null
+if [ $? = 1 ]; then
+	echo alias block-major-152 aoe >> $f
+	echo alias char-major-152 aoe >> $f
+fi
+
diff --git a/Documentation/aoe/mkdevs.sh b/Documentation/aoe/mkdevs.sh
new file mode 100644
index 000000000000..6ce70703eb47
--- /dev/null
+++ b/Documentation/aoe/mkdevs.sh
@@ -0,0 +1,36 @@
+#!/bin/sh
+
+n_shelves=${n_shelves:-10}
+n_partitions=${n_partitions:-16}
+
+if test "$#" != "1"; then
+	echo "Usage: sh `basename $0` {dir}" 1>&2
+	exit 1
+fi
+dir=$1
+
+MAJOR=152
+
+echo "Creating AoE devnode files in $dir ..."
+
+set -e
+
+mkdir -p $dir
+
+# (Status info is in sysfs.  See status.sh.)
+# rm -f $dir/stat
+# mknod -m 0400 $dir/stat c $MAJOR 1
+rm -f $dir/err
+mknod -m 0400 $dir/err c $MAJOR 2
+rm -f $dir/discover
+mknod -m 0200 $dir/discover c $MAJOR 3
+rm -f $dir/interfaces
+mknod -m 0200 $dir/interfaces c $MAJOR 4
+
+export n_partitions
+mkshelf=`echo $0 | sed 's!mkdevs!mkshelf!'`
+i=0
+while test $i -lt $n_shelves; do
+	sh -xc "sh $mkshelf $dir $i"
+	i=`expr $i + 1`
+done
diff --git a/Documentation/aoe/mkshelf.sh b/Documentation/aoe/mkshelf.sh
new file mode 100644
index 000000000000..40932836bb80
--- /dev/null
+++ b/Documentation/aoe/mkshelf.sh
@@ -0,0 +1,25 @@
+#! /bin/sh
+
+if test "$#" != "2"; then
+	echo "Usage: sh `basename $0` {dir} {shelfaddress}" 1>&2
+	exit 1
+fi
+n_partitions=${n_partitions:-16}
+dir=$1
+shelf=$2
+MAJOR=152
+
+set -e
+
+minor=`echo 10 \* $shelf \* $n_partitions | bc`
+endp=`echo $n_partitions - 1 | bc`
+for slot in `seq 0 9`; do
+	for part in `seq 0 $endp`; do
+		name=e$shelf.$slot
+		test "$part" != "0" && name=${name}p$part
+		rm -f $dir/$name
+		mknod -m 0660 $dir/$name b $MAJOR $minor
+
+		minor=`expr $minor + 1`
+	done
+done
diff --git a/Documentation/aoe/status.sh b/Documentation/aoe/status.sh
new file mode 100644
index 000000000000..6628116d4a9f
--- /dev/null
+++ b/Documentation/aoe/status.sh
@@ -0,0 +1,31 @@
+#! /bin/sh
+# collate and present sysfs information about AoE storage
+
+set -e
+format="%8s\t%8s\t%8s\n"
+me=`basename $0`
+sysd=${sysfs_dir:-/sys}
+
+# printf "$format" device mac netif state
+
+# Suse 9.1 Pro doesn't put /sys in /etc/mtab
+#test -z "`mount | grep sysfs`" && {
+test ! -d "$sysd/block" && {
+	echo "$me Error: sysfs is not mounted" 1>&2
+	exit 1
+}
+test -z "`lsmod | grep '^aoe'`" && {
+	echo  "$me Error: aoe module is not loaded" 1>&2
+	exit 1
+}
+
+for d in `ls -d $sysd/block/etherd* 2>/dev/null | grep -v p` end; do
+	# maybe ls comes up empty, so we use "end"
+	test $d = end && continue
+
+	dev=`echo "$d" | sed 's/.*!//'`
+	printf "$format" \
+		"$dev" \
+		"`cat \"$d/netif\"`" \
+		"`cat \"$d/state\"`"
+done | sort
diff --git a/Documentation/aoe/udev-install.sh b/Documentation/aoe/udev-install.sh
new file mode 100644
index 000000000000..861a27f98771
--- /dev/null
+++ b/Documentation/aoe/udev-install.sh
@@ -0,0 +1,26 @@
+# install the aoe-specific udev rules from udev.txt into 
+# the system's udev configuration
+# 
+
+me="`basename $0`"
+
+# find udev.conf, often /etc/udev/udev.conf
+# (or environment can specify where to find udev.conf)
+#
+if test -z "$conf"; then
+	if test -r /etc/udev/udev.conf; then
+		conf=/etc/udev/udev.conf
+	else
+		conf="`find /etc -type f -name udev.conf 2> /dev/null`"
+		if test -z "$conf" || test ! -r "$conf"; then
+			echo "$me Error: no udev.conf found" 1>&2
+			exit 1
+		fi
+	fi
+fi
+
+# find the directory where udev rules are stored, often
+# /etc/udev/rules.d
+#
+rules_d="`sed -n '/^udev_rules=/{ s!udev_rules=!!; s!\"!!g; p; }' $conf`"
+test "$rules_d" && sh -xc "cp `dirname $0`/udev.txt $rules_d/60-aoe.rules"
diff --git a/Documentation/aoe/udev.txt b/Documentation/aoe/udev.txt
new file mode 100644
index 000000000000..ab39d8bb634c
--- /dev/null
+++ b/Documentation/aoe/udev.txt
@@ -0,0 +1,23 @@
+# These rules tell udev what device nodes to create for aoe support.
+# They may be installed along the following lines (adjusted to what
+# you see on your system).
+# 
+#   ecashin@makki ~$ su
+#   Password:
+#   bash# find /etc -type f -name udev.conf
+#   /etc/udev/udev.conf
+#   bash# grep udev_rules= /etc/udev/udev.conf
+#   udev_rules="/etc/udev/rules.d/"
+#   bash# ls /etc/udev/rules.d/
+#   10-wacom.rules  50-udev.rules
+#   bash# cp /path/to/linux-2.6.xx/Documentation/aoe/udev.txt \
+#           /etc/udev/rules.d/60-aoe.rules
+#  
+
+# aoe char devices
+SUBSYSTEM="aoe", KERNEL="discover",	NAME="etherd/%k", GROUP="disk", MODE="0220"
+SUBSYSTEM="aoe", KERNEL="err",		NAME="etherd/%k", GROUP="disk", MODE="0440"
+SUBSYSTEM="aoe", KERNEL="interfaces",	NAME="etherd/%k", GROUP="disk", MODE="0220"
+
+# aoe block devices     
+KERNEL="etherd*",       NAME="%k", GROUP="disk"