cpufreq: Implement light weight ->target_index() routine

Currently, the prototype of cpufreq_drivers target routines is:

int target(struct cpufreq_policy *policy, unsigned int target_freq,
		unsigned int relation);

And most of the drivers call cpufreq_frequency_table_target() to get a valid
index of their frequency table which is closest to the target_freq. And they
don't use target_freq and relation after that.

So, it makes sense to just do this work in cpufreq core before calling
cpufreq_frequency_table_target() and simply pass index instead. But this can be
done only with drivers which expose their frequency table with cpufreq core. For
others we need to stick with the old prototype of target() until those drivers
are converted to expose frequency tables.

This patch implements the new light weight prototype for target_index() routine.
It looks like this:

int target_index(struct cpufreq_policy *policy, unsigned int index);

CPUFreq core will call cpufreq_frequency_table_target() before calling this
routine and pass index to it. Because CPUFreq core now requires to call routines
present in freq_table.c CONFIG_CPU_FREQ_TABLE must be enabled all the time.

This also marks target() interface as deprecated. So, that new drivers avoid
using it. And Documentation is updated accordingly.

It also converts existing .target() to newly defined light weight
.target_index() routine for many driver.

Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Russell King <linux@arm.linux.org.uk>
Acked-by: David S. Miller <davem@davemloft.net>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>

1 files changed, 18 insertions, 9 deletions

diff --git a/Documentation/cpu-freq/cpu-drivers.txt b/Documentation/cpu-freq/cpu-drivers.txt
index 40282e617913..8b1a4451422e 100644
--- a/Documentation/cpu-freq/cpu-drivers.txt
+++ b/Documentation/cpu-freq/cpu-drivers.txt
@@ -23,8 +23,8 @@ Contents:
 1.1  Initialization
 1.2  Per-CPU Initialization
 1.3  verify
-1.4  target or setpolicy?
-1.5  target
+1.4  target/target_index or setpolicy?
+1.5  target/target_index
 1.6  setpolicy
 2.   Frequency Table Helpers
 
@@ -56,7 +56,8 @@ cpufreq_driver.init -		A pointer to the per-CPU initialization
 cpufreq_driver.verify -		A pointer to a "verification" function.
 
 cpufreq_driver.setpolicy _or_ 
-cpufreq_driver.target -		See below on the differences.
+cpufreq_driver.target/
+target_index		-	See below on the differences.
 
 And optionally
 
@@ -66,7 +67,7 @@ cpufreq_driver.resume -		A pointer to a per-CPU resume function
 				which is called with interrupts disabled
 				and _before_ the pre-suspend frequency
 				and/or policy is restored by a call to
-				->target or ->setpolicy.
+				->target/target_index or ->setpolicy.
 
 cpufreq_driver.attr -		A pointer to a NULL-terminated list of
 				"struct freq_attr" which allow to
@@ -103,8 +104,8 @@ policy->governor		must contain the "default policy" for
 				this CPU. A few moments later,
 				cpufreq_driver.verify and either
 				cpufreq_driver.setpolicy or
-				cpufreq_driver.target is called with
-				these values.
+				cpufreq_driver.target/target_index is called
+				with these values.
 
 For setting some of these values (cpuinfo.min[max]_freq, policy->min[max]), the
 frequency table helpers might be helpful. See the section 2 for more information
@@ -133,20 +134,28 @@ range) is within policy->min and policy->max. If necessary, increase
 policy->max first, and only if this is no solution, decrease policy->min.
 
 
-1.4 target or setpolicy?
+1.4 target/target_index or setpolicy?
 ----------------------------
 
 Most cpufreq drivers or even most cpu frequency scaling algorithms 
 only allow the CPU to be set to one frequency. For these, you use the
-->target call.
+->target/target_index call.
 
 Some cpufreq-capable processors switch the frequency between certain
 limits on their own. These shall use the ->setpolicy call
 
 
-1.4. target
+1.4. target/target_index
 -------------
 
+The target_index call has two arguments: struct cpufreq_policy *policy,
+and unsigned int index (into the exposed frequency table).
+
+The CPUfreq driver must set the new frequency when called here. The
+actual frequency must be determined by freq_table[index].frequency.
+
+Deprecated:
+----------
 The target call has three arguments: struct cpufreq_policy *policy,
 unsigned int target_frequency, unsigned int relation.