Orangefs: Merge tag 'v4.4-rc1' into for-next

Linux 4.4-rc1

5 files changed, 368 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
new file mode 100644
index 000000000000..f344b9e49198
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -0,0 +1,149 @@
+Qualcomm Technologies Inc. adreno/snapdragon DSI output
+
+DSI Controller:
+Required properties:
+- compatible:
+  * "qcom,mdss-dsi-ctrl"
+- reg: Physical base address and length of the registers of controller
+- reg-names: The names of register regions. The following regions are required:
+  * "dsi_ctrl"
+- qcom,dsi-host-index: The ID of DSI controller hardware instance. This should
+  be 0 or 1, since we have 2 DSI controllers at most for now.
+- interrupts: The interrupt signal from the DSI block.
+- power-domains: Should be <&mmcc MDSS_GDSC>.
+- clocks: device clocks
+  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required:
+  * "bus_clk"
+  * "byte_clk"
+  * "core_clk"
+  * "core_mmss_clk"
+  * "iface_clk"
+  * "mdp_core_clk"
+  * "pixel_clk"
+- vdd-supply: phandle to vdd regulator device node
+- vddio-supply: phandle to vdd-io regulator device node
+- vdda-supply: phandle to vdda regulator device node
+- qcom,dsi-phy: phandle to DSI PHY device node
+
+Optional properties:
+- panel@0: Node of panel connected to this DSI controller.
+  See files in Documentation/devicetree/bindings/display/panel/ for each supported
+  panel.
+- qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is
+  driving a panel which needs 2 DSI links.
+- qcom,master-dsi: Boolean value indicating if the DSI controller is driving
+  the master link of the 2-DSI panel.
+- qcom,sync-dual-dsi: Boolean value indicating if the DSI controller is
+  driving a 2-DSI panel whose 2 links need receive command simultaneously.
+- interrupt-parent: phandle to the MDP block if the interrupt signal is routed
+  through MDP block
+- pinctrl-names: the pin control state names; should contain "default"
+- pinctrl-0: the default pinctrl state (active)
+- pinctrl-n: the "sleep" pinctrl state
+- port: DSI controller output port. This contains one endpoint subnode, with its
+  remote-endpoint set to the phandle of the connected panel's endpoint.
+  See Documentation/devicetree/bindings/graph.txt for device graph info.
+
+DSI PHY:
+Required properties:
+- compatible: Could be the following
+  * "qcom,dsi-phy-28nm-hpm"
+  * "qcom,dsi-phy-28nm-lp"
+  * "qcom,dsi-phy-20nm"
+- reg: Physical base address and length of the registers of PLL, PHY and PHY
+  regulator
+- reg-names: The names of register regions. The following regions are required:
+  * "dsi_pll"
+  * "dsi_phy"
+  * "dsi_phy_regulator"
+- qcom,dsi-phy-index: The ID of DSI PHY hardware instance. This should
+  be 0 or 1, since we have 2 DSI PHYs at most for now.
+- power-domains: Should be <&mmcc MDSS_GDSC>.
+- clocks: device clocks
+  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required:
+  * "iface_clk"
+- vddio-supply: phandle to vdd-io regulator device node
+
+Optional properties:
+- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
+  regulator is wanted.
+
+Example:
+	mdss_dsi0: qcom,mdss_dsi@fd922800 {
+		compatible = "qcom,mdss-dsi-ctrl";
+		qcom,dsi-host-index = <0>;
+		interrupt-parent = <&mdss_mdp>;
+		interrupts = <4 0>;
+		reg-names = "dsi_ctrl";
+		reg = <0xfd922800 0x200>;
+		power-domains = <&mmcc MDSS_GDSC>;
+		clock-names =
+			"bus_clk",
+			"byte_clk",
+			"core_clk",
+			"core_mmss_clk",
+			"iface_clk",
+			"mdp_core_clk",
+			"pixel_clk";
+		clocks =
+			<&mmcc MDSS_AXI_CLK>,
+			<&mmcc MDSS_BYTE0_CLK>,
+			<&mmcc MDSS_ESC0_CLK>,
+			<&mmcc MMSS_MISC_AHB_CLK>,
+			<&mmcc MDSS_AHB_CLK>,
+			<&mmcc MDSS_MDP_CLK>,
+			<&mmcc MDSS_PCLK0_CLK>;
+		vdda-supply = <&pma8084_l2>;
+		vdd-supply = <&pma8084_l22>;
+		vddio-supply = <&pma8084_l12>;
+
+		qcom,dsi-phy = <&mdss_dsi_phy0>;
+
+		qcom,dual-dsi-mode;
+		qcom,master-dsi;
+		qcom,sync-dual-dsi;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&mdss_dsi_active>;
+		pinctrl-1 = <&mdss_dsi_suspend>;
+
+		panel: panel@0 {
+			compatible = "sharp,lq101r1sx01";
+			reg = <0>;
+			link2 = <&secondary>;
+
+			power-supply = <...>;
+			backlight = <...>;
+
+			port {
+				panel_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+		};
+
+		port {
+			dsi0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	mdss_dsi_phy0: qcom,mdss_dsi_phy@fd922a00 {
+		compatible = "qcom,dsi-phy-28nm-hpm";
+		qcom,dsi-phy-index = <0>;
+		reg-names =
+			"dsi_pll",
+			"dsi_phy",
+			"dsi_phy_regulator";
+		reg =   <0xfd922a00 0xd4>,
+			<0xfd922b00 0x2b0>,
+			<0xfd922d80 0x7b>;
+		clock-names = "iface_clk";
+		clocks = <&mmcc MDSS_AHB_CLK>;
+		vddio-supply = <&pma8084_l12>;
+
+		qcom,dsi-phy-regulator-ldo-mode;
+	};
diff --git a/Documentation/devicetree/bindings/display/msm/edp.txt b/Documentation/devicetree/bindings/display/msm/edp.txt
new file mode 100644
index 000000000000..3a20f6ea5898
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/edp.txt
@@ -0,0 +1,60 @@
+Qualcomm Technologies Inc. adreno/snapdragon eDP output
+
+Required properties:
+- compatible:
+  * "qcom,mdss-edp"
+- reg: Physical base address and length of the registers of controller and PLL
+- reg-names: The names of register regions. The following regions are required:
+  * "edp"
+  * "pll_base"
+- interrupts: The interrupt signal from the eDP block.
+- power-domains: Should be <&mmcc MDSS_GDSC>.
+- clocks: device clocks
+  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required:
+  * "core_clk"
+  * "iface_clk"
+  * "mdp_core_clk"
+  * "pixel_clk"
+  * "link_clk"
+- #clock-cells: The value should be 1.
+- vdda-supply: phandle to vdda regulator device node
+- lvl-vdd-supply: phandle to regulator device node which is used to supply power
+  to HPD receiving chip
+- panel-en-gpios: GPIO pin to supply power to panel.
+- panel-hpd-gpios: GPIO pin used for eDP hpd.
+
+
+Optional properties:
+- interrupt-parent: phandle to the MDP block if the interrupt signal is routed
+  through MDP block
+
+Example:
+	mdss_edp: qcom,mdss_edp@fd923400 {
+			compatible = "qcom,mdss-edp";
+			reg-names =
+				"edp",
+				"pll_base";
+			reg =	<0xfd923400 0x700>,
+				<0xfd923a00 0xd4>;
+			interrupt-parent = <&mdss_mdp>;
+			interrupts = <12 0>;
+			power-domains = <&mmcc MDSS_GDSC>;
+			clock-names =
+				"core_clk",
+				"pixel_clk",
+				"iface_clk",
+				"link_clk",
+				"mdp_core_clk";
+			clocks =
+				<&mmcc MDSS_EDPAUX_CLK>,
+				<&mmcc MDSS_EDPPIXEL_CLK>,
+				<&mmcc MDSS_AHB_CLK>,
+				<&mmcc MDSS_EDPLINK_CLK>,
+				<&mmcc MDSS_MDP_CLK>;
+			#clock-cells = <1>;
+			vdda-supply = <&pma8084_l12>;
+			lvl-vdd-supply = <&lvl_vreg>;
+			panel-en-gpios = <&tlmm 137 0>;
+			panel-hpd-gpios = <&tlmm 103 0>;
+	};
diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt
new file mode 100644
index 000000000000..67d0a58dbb77
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/gpu.txt
@@ -0,0 +1,52 @@
+Qualcomm adreno/snapdragon GPU
+
+Required properties:
+- compatible: "qcom,adreno-3xx"
+- reg: Physical base address and length of the controller's registers.
+- interrupts: The interrupt signal from the gpu.
+- clocks: device clocks
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required:
+  * "core_clk"
+  * "iface_clk"
+  * "mem_iface_clk"
+- qcom,chipid: gpu chip-id.  Note this may become optional for future
+  devices if we can reliably read the chipid from hw
+- qcom,gpu-pwrlevels: list of operating points
+  - compatible: "qcom,gpu-pwrlevels"
+  - for each qcom,gpu-pwrlevel:
+    - qcom,gpu-freq: requested gpu clock speed
+    - NOTE: downstream android driver defines additional parameters to
+      configure memory bandwidth scaling per OPP.
+
+Example:
+
+/ {
+	...
+
+	gpu: qcom,kgsl-3d0@4300000 {
+		compatible = "qcom,adreno-3xx";
+		reg = <0x04300000 0x20000>;
+		reg-names = "kgsl_3d0_reg_memory";
+		interrupts = <GIC_SPI 80 0>;
+		interrupt-names = "kgsl_3d0_irq";
+		clock-names =
+		    "core_clk",
+		    "iface_clk",
+		    "mem_iface_clk";
+		clocks =
+		    <&mmcc GFX3D_CLK>,
+		    <&mmcc GFX3D_AHB_CLK>,
+		    <&mmcc MMSS_IMEM_AHB_CLK>;
+		qcom,chipid = <0x03020100>;
+		qcom,gpu-pwrlevels {
+			compatible = "qcom,gpu-pwrlevels";
+			qcom,gpu-pwrlevel@0 {
+				qcom,gpu-freq = <450000000>;
+			};
+			qcom,gpu-pwrlevel@1 {
+				qcom,gpu-freq = <27000000>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt
new file mode 100644
index 000000000000..379ee2ea9a3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/hdmi.txt
@@ -0,0 +1,58 @@
+Qualcomm adreno/snapdragon hdmi output
+
+Required properties:
+- compatible: one of the following
+   * "qcom,hdmi-tx-8996"
+   * "qcom,hdmi-tx-8994"
+   * "qcom,hdmi-tx-8084"
+   * "qcom,hdmi-tx-8974"
+   * "qcom,hdmi-tx-8660"
+   * "qcom,hdmi-tx-8960"
+- reg: Physical base address and length of the controller's registers
+- reg-names: "core_physical"
+- interrupts: The interrupt signal from the hdmi block.
+- clocks: device clocks
+  See ../clocks/clock-bindings.txt for details.
+- qcom,hdmi-tx-ddc-clk-gpio: ddc clk pin
+- qcom,hdmi-tx-ddc-data-gpio: ddc data pin
+- qcom,hdmi-tx-hpd-gpio: hpd pin
+- core-vdda-supply: phandle to supply regulator
+- hdmi-mux-supply: phandle to mux regulator
+
+Optional properties:
+- qcom,hdmi-tx-mux-en-gpio: hdmi mux enable pin
+- qcom,hdmi-tx-mux-sel-gpio: hdmi mux select pin
+- power-domains: reference to the power domain(s), if available.
+- pinctrl-names: the pin control state names; should contain "default"
+- pinctrl-0: the default pinctrl state (active)
+- pinctrl-1: the "sleep" pinctrl state
+
+Example:
+
+/ {
+	...
+
+	hdmi: qcom,hdmi-tx-8960@4a00000 {
+		compatible = "qcom,hdmi-tx-8960";
+		reg-names = "core_physical";
+		reg = <0x04a00000 0x1000>;
+		interrupts = <GIC_SPI 79 0>;
+		power-domains = <&mmcc MDSS_GDSC>;
+		clock-names =
+		    "core_clk",
+		    "master_iface_clk",
+		    "slave_iface_clk";
+		clocks =
+		    <&mmcc HDMI_APP_CLK>,
+		    <&mmcc HDMI_M_AHB_CLK>,
+		    <&mmcc HDMI_S_AHB_CLK>;
+		qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>;
+		qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>;
+		qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
+		core-vdda-supply = <&pm8921_hdmi_mvs>;
+		hdmi-mux-supply = <&ext_3p3v>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&hpd_active  &ddc_active  &cec_active>;
+		pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/msm/mdp.txt b/Documentation/devicetree/bindings/display/msm/mdp.txt
new file mode 100644
index 000000000000..0833edaba4c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/mdp.txt
@@ -0,0 +1,49 @@
+Qualcomm adreno/snapdragon display controller
+
+Required properties:
+- compatible:
+  * "qcom,mdp" - mdp4
+- reg: Physical base address and length of the controller's registers.
+- interrupts: The interrupt signal from the display controller.
+- connectors: array of phandles for output device(s)
+- clocks: device clocks
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required:
+  * "core_clk"
+  * "iface_clk"
+  * "src_clk"
+  * "hdmi_clk"
+  * "mpd_clk"
+
+Optional properties:
+- gpus: phandle for gpu device
+- clock-names: the following clocks are optional:
+  * "lut_clk"
+
+Example:
+
+/ {
+	...
+
+	mdp: qcom,mdp@5100000 {
+		compatible = "qcom,mdp";
+		reg = <0x05100000 0xf0000>;
+		interrupts = <GIC_SPI 75 0>;
+		connectors = <&hdmi>;
+		gpus = <&gpu>;
+		clock-names =
+		    "core_clk",
+		    "iface_clk",
+		    "lut_clk",
+		    "src_clk",
+		    "hdmi_clk",
+		    "mdp_clk";
+		clocks =
+		    <&mmcc MDP_SRC>,
+		    <&mmcc MDP_AHB_CLK>,
+		    <&mmcc MDP_LUT_CLK>,
+		    <&mmcc TV_SRC>,
+		    <&mmcc HDMI_TV_CLK>,
+		    <&mmcc MDP_TV_CLK>;
+	};
+};