dt-bindings: counter: Adjust dt-bindings for STM32 lptimer move

The STM32 LP Timer counter driver now resides under the Counter
subsystem. This patch adjusts dt-bindings to account for the STM32
lptimer driver move.

Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 0 insertions, 29 deletions

diff --git a/Documentation/devicetree/bindings/iio/counter/stm32-lptimer-cnt.txt b/Documentation/devicetree/bindings/iio/counter/stm32-lptimer-cnt.txt
deleted file mode 100644
index e90bc47f752a..000000000000
--- a/Documentation/devicetree/bindings/iio/counter/stm32-lptimer-cnt.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-STMicroelectronics STM32 Low-Power Timer quadrature encoder and counter
-
-STM32 Low-Power Timer provides several counter modes. It can be used as:
-- quadrature encoder to detect angular position and direction of rotary
-  elements, from IN1 and IN2 input signals.
-- simple counter from IN1 input signal.
-
-Must be a sub-node of an STM32 Low-Power Timer device tree node.
-See ../mfd/stm32-lptimer.txt for details about the parent node.
-
-Required properties:
-- compatible:		Must be "st,stm32-lptimer-counter".
-- pinctrl-names: 	Set to "default". An additional "sleep" state can be
-			defined to set pins in sleep state.
-- pinctrl-n: 		List of phandles pointing to pin configuration nodes,
-			to set IN1/IN2 pins in mode of operation for Low-Power
-			Timer input on external pin.
-
-Example:
-	timer@40002400 {
-		compatible = "st,stm32-lptimer";
-		...
-		counter {
-			compatible = "st,stm32-lptimer-counter";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&lptim1_in_pins>;
-			pinctrl-1 = <&lptim1_sleep_in_pins>;
-		};
-	};