diff options
| author | Uwe Kleine-König <u.kleine-koenig@pengutronix.de> | 2014-07-11 10:17:57 +0200 |
|---|---|---|
| committer | Mark Brown <broonie@linaro.org> | 2014-07-11 13:39:36 +0100 |
| commit | 10ed7e9847b62043ab488dbb3ff6cd9f26038568 (patch) | |
| tree | 0f66802db478bda73015bf75f63ae114428ed37e /Documentation/devicetree/bindings/spi/efm32-spi.txt | |
| parent | 7171511eaec5bf23fb06078f59784a3a0626b38f (diff) | |
| download | linux-10ed7e9847b62043ab488dbb3ff6cd9f26038568.tar.gz linux-10ed7e9847b62043ab488dbb3ff6cd9f26038568.tar.bz2 linux-10ed7e9847b62043ab488dbb3ff6cd9f26038568.zip | |
spi: efm32: correct namespacing of location property
Olof Johansson pointed out that usually the company name is picked as
namespace prefix to specific properties. So expect "energymicro,location"
but fall back to the previously introduced name "efm32,location".
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Diffstat (limited to 'Documentation/devicetree/bindings/spi/efm32-spi.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/spi/efm32-spi.txt | 13 |
1 files changed, 7 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/spi/efm32-spi.txt b/Documentation/devicetree/bindings/spi/efm32-spi.txt index 130cd17e3680..750e29aff9bc 100644 --- a/Documentation/devicetree/bindings/spi/efm32-spi.txt +++ b/Documentation/devicetree/bindings/spi/efm32-spi.txt @@ -10,11 +10,12 @@ Required properties: - cs-gpios: see spi-bus.txt Recommended properties : -- efm32,location: Value to write to the ROUTE register's LOCATION bitfield to - configure the pinmux for the device, see datasheet for values. - If "efm32,location" property is not provided, keeping what is - already configured in the hardware, so its either the reset - default 0 or whatever the bootloader did. +- energymicro,location: Value to write to the ROUTE register's LOCATION + bitfield to configure the pinmux for the device, see + datasheet for values. + If this property is not provided, keeping what is + already configured in the hardware, so its either the + reset default 0 or whatever the bootloader did. Example: @@ -26,7 +27,7 @@ spi1: spi@0x4000c400 { /* USART1 */ interrupts = <15 16>; clocks = <&cmu 20>; cs-gpios = <&gpio 51 1>; // D3 - efm32,location = <1>; + energymicro,location = <1>; status = "ok"; ks8851@0 { |