[media] doc-rst: move DVB avulse docs to Documentation/media

There are several documentation stuff under Documentation/dvb.

Move them to Documentation/media/dvb-drivers and rename them to
rst, as they'll soon be converted to rst files.

No changes at the documentation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

1 files changed, 0 insertions, 78 deletions

diff --git a/Documentation/dvb/technisat.txt b/Documentation/dvb/technisat.txt
deleted file mode 100644
index f0cc4f2d8365..000000000000
--- a/Documentation/dvb/technisat.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-How to set up the Technisat/B2C2 Flexcop devices
-================================================
-
-1) Find out what device you have
-================================
-
-Important Notice: The driver does NOT support Technisat USB 2 devices!
-
-First start your linux box with a shipped kernel:
-lspci -vvv for a PCI device (lsusb -vvv for an USB device) will show you for example:
-02:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip /
- Technisat SkyStar2 DVB card (rev 02)
-
-dmesg | grep frontend may show you for example:
-DVB: registering frontend 0 (Conexant CX24123/CX24109)...
-
-2) Kernel compilation:
-======================
-
-If the Flexcop / Technisat is the only DVB / TV / Radio device in your box
- get rid of unnecessary modules and check this one:
-"Multimedia support" => "Customise analog and hybrid tuner modules to build"
-In this directory uncheck every driver which is activated there
- (except "Simple tuner support" for ATSC 3rd generation only -> see case 9 please).
-
-Then please activate:
-2a) Main module part:
-"Multimedia support" => "DVB/ATSC adapters"
- => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters"
-
-a.) => "Technisat/B2C2 Air/Sky/Cable2PC PCI" (PCI card) or
-b.) => "Technisat/B2C2 Air/Sky/Cable2PC USB" (USB 1.1 adapter)
- and for troubleshooting purposes:
-c.) => "Enable debug for the B2C2 FlexCop drivers"
-
-2b) Frontend / Tuner / Demodulator module part:
-"Multimedia support" => "DVB/ATSC adapters"
- => "Customise the frontend modules to build" "Customise DVB frontends" =>
-
-1.) SkyStar DVB-S Revision 2.3:
-a.) => "Zarlink VP310/MT312/ZL10313 based"
-b.) => "Generic I2C PLL based tuners"
-
-2.) SkyStar DVB-S Revision 2.6:
-a.) => "ST STV0299 based"
-b.) => "Generic I2C PLL based tuners"
-
-3.) SkyStar DVB-S Revision 2.7:
-a.) => "Samsung S5H1420 based"
-b.) => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS"
-c.) => "ISL6421 SEC controller"
-
-4.) SkyStar DVB-S Revision 2.8:
-a.) => "Conexant CX24123 based"
-b.) => "Conexant CX24113/CX24128 tuner for DVB-S/DSS"
-c.) => "ISL6421 SEC controller"
-
-5.) AirStar DVB-T card:
-a.) => "Zarlink MT352 based"
-b.) => "Generic I2C PLL based tuners"
-
-6.) CableStar DVB-C card:
-a.) => "ST STV0297 based"
-b.) => "Generic I2C PLL based tuners"
-
-7.) AirStar ATSC card 1st generation:
-a.) => "Broadcom BCM3510"
-
-8.) AirStar ATSC card 2nd generation:
-a.) => "NxtWave Communications NXT2002/NXT2004 based"
-b.) => "Generic I2C PLL based tuners"
-
-9.) AirStar ATSC card 3rd generation:
-a.) => "LG Electronics LGDT3302/LGDT3303 based"
-b.) "Multimedia support" => "Customise analog and hybrid tuner modules to build"
- => "Simple tuner support"
-
-Author: Uwe Bugla <uwe.bugla@gmx.de> August 2009