diff options
author | Mauro Carvalho Chehab <mchehab+huawei@kernel.org> | 2020-03-05 07:49:04 +0100 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab+huawei@kernel.org> | 2020-04-14 10:29:06 +0200 |
commit | c8b667ac517ecb5fada1c085236a9c05d0e303ca (patch) | |
tree | 0143293d1409649c483da11dc73e98f1c060dbe3 /Documentation/media | |
parent | 485f9a434c165441fafec9259fa1057c399af903 (diff) | |
download | linux-c8b667ac517ecb5fada1c085236a9c05d0e303ca.tar.gz linux-c8b667ac517ecb5fada1c085236a9c05d0e303ca.tar.bz2 linux-c8b667ac517ecb5fada1c085236a9c05d0e303ca.zip |
media: docs: move soc-camera.rst to staging
As the entire soc_camera driver is on staging to be removed
soon, let's place there its documentation too.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Diffstat (limited to 'Documentation/media')
-rw-r--r-- | Documentation/media/v4l-drivers/index.rst | 1 | ||||
-rw-r--r-- | Documentation/media/v4l-drivers/soc-camera.rst | 171 |
2 files changed, 0 insertions, 172 deletions
diff --git a/Documentation/media/v4l-drivers/index.rst b/Documentation/media/v4l-drivers/index.rst index b41fea23fe5d..eca22b82de94 100644 --- a/Documentation/media/v4l-drivers/index.rst +++ b/Documentation/media/v4l-drivers/index.rst @@ -61,7 +61,6 @@ For more details see the file COPYING in the source distribution of Linux. si470x si4713 si476x - soc-camera uvcvideo vimc vivid diff --git a/Documentation/media/v4l-drivers/soc-camera.rst b/Documentation/media/v4l-drivers/soc-camera.rst deleted file mode 100644 index 7c39711aebf8..000000000000 --- a/Documentation/media/v4l-drivers/soc-camera.rst +++ /dev/null @@ -1,171 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -The Soc-Camera Drivers -====================== - -Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> - -Terminology ------------ - -The following terms are used in this document: - - camera / camera device / camera sensor - a video-camera sensor chip, capable - of connecting to a variety of systems and interfaces, typically uses i2c for - control and configuration, and a parallel or a serial bus for data. - - camera host - an interface, to which a camera is connected. Typically a - specialised interface, present on many SoCs, e.g. PXA27x and PXA3xx, SuperH, - i.MX27, i.MX31. - - camera host bus - a connection between a camera host and a camera. Can be - parallel or serial, consists of data and control lines, e.g. clock, vertical - and horizontal synchronization signals. - -Purpose of the soc-camera subsystem ------------------------------------ - -The soc-camera subsystem initially provided a unified API between camera host -drivers and camera sensor drivers. Later the soc-camera sensor API has been -replaced with the V4L2 standard subdev API. This also made camera driver re-use -with non-soc-camera hosts possible. The camera host API to the soc-camera core -has been preserved. - -Soc-camera implements a V4L2 interface to the user, currently only the "mmap" -method is supported by host drivers. However, the soc-camera core also provides -support for the "read" method. - -The subsystem has been designed to support multiple camera host interfaces and -multiple cameras per interface, although most applications have only one camera -sensor. - -Existing drivers ----------------- - -As of 3.7 there are seven host drivers in the mainline: atmel-isi.c, -mx1_camera.c (broken, scheduled for removal), mx2_camera.c, mx3_camera.c, -omap1_camera.c, pxa_camera.c, sh_mobile_ceu_camera.c, and multiple sensor -drivers under drivers/media/i2c/soc_camera/. - -Camera host API ---------------- - -A host camera driver is registered using the - -.. code-block:: none - - soc_camera_host_register(struct soc_camera_host *); - -function. The host object can be initialized as follows: - -.. code-block:: none - - struct soc_camera_host *ici; - ici->drv_name = DRV_NAME; - ici->ops = &camera_host_ops; - ici->priv = pcdev; - ici->v4l2_dev.dev = &pdev->dev; - ici->nr = pdev->id; - -All camera host methods are passed in a struct soc_camera_host_ops: - -.. code-block:: none - - static struct soc_camera_host_ops camera_host_ops = { - .owner = THIS_MODULE, - .add = camera_add_device, - .remove = camera_remove_device, - .set_fmt = camera_set_fmt_cap, - .try_fmt = camera_try_fmt_cap, - .init_videobuf2 = camera_init_videobuf2, - .poll = camera_poll, - .querycap = camera_querycap, - .set_bus_param = camera_set_bus_param, - /* The rest of host operations are optional */ - }; - -.add and .remove methods are called when a sensor is attached to or detached -from the host. .set_bus_param is used to configure physical connection -parameters between the host and the sensor. .init_videobuf2 is called by -soc-camera core when a video-device is opened, the host driver would typically -call vb2_queue_init() in this method. Further video-buffer management is -implemented completely by the specific camera host driver. If the host driver -supports non-standard pixel format conversion, it should implement a -.get_formats and, possibly, a .put_formats operations. See below for more -details about format conversion. The rest of the methods are called from -respective V4L2 operations. - -Camera API ----------- - -Sensor drivers can use struct soc_camera_link, typically provided by the -platform, and used to specify to which camera host bus the sensor is connected, -and optionally provide platform .power and .reset methods for the camera. This -struct is provided to the camera driver via the I2C client device platform data -and can be obtained, using the soc_camera_i2c_to_link() macro. Care should be -taken, when using soc_camera_vdev_to_subdev() and when accessing struct -soc_camera_device, using v4l2_get_subdev_hostdata(): both only work, when -running on an soc-camera host. The actual camera driver operation is implemented -using the V4L2 subdev API. Additionally soc-camera camera drivers can use -auxiliary soc-camera helper functions like soc_camera_power_on() and -soc_camera_power_off(), which switch regulators, provided by the platform and call -board-specific power switching methods. soc_camera_apply_board_flags() takes -camera bus configuration capability flags and applies any board transformations, -e.g. signal polarity inversion. soc_mbus_get_fmtdesc() can be used to obtain a -pixel format descriptor, corresponding to a certain media-bus pixel format code. -soc_camera_limit_side() can be used to restrict beginning and length of a frame -side, based on camera capabilities. - -VIDIOC_S_CROP and VIDIOC_S_FMT behaviour ----------------------------------------- - -Above user ioctls modify image geometry as follows: - -VIDIOC_S_CROP: sets location and sizes of the sensor window. Unit is one sensor -pixel. Changing sensor window sizes preserves any scaling factors, therefore -user window sizes change as well. - -VIDIOC_S_FMT: sets user window. Should preserve previously set sensor window as -much as possible by modifying scaling factors. If the sensor window cannot be -preserved precisely, it may be changed too. - -In soc-camera there are two locations, where scaling and cropping can take -place: in the camera driver and in the host driver. User ioctls are first passed -to the host driver, which then generally passes them down to the camera driver. -It is more efficient to perform scaling and cropping in the camera driver to -save camera bus bandwidth and maximise the framerate. However, if the camera -driver failed to set the required parameters with sufficient precision, the host -driver may decide to also use its own scaling and cropping to fulfill the user's -request. - -Camera drivers are interfaced to the soc-camera core and to host drivers over -the v4l2-subdev API, which is completely functional, it doesn't pass any data. -Therefore all camera drivers shall reply to .g_fmt() requests with their current -output geometry. This is necessary to correctly configure the camera bus. -.s_fmt() and .try_fmt() have to be implemented too. Sensor window and scaling -factors have to be maintained by camera drivers internally. According to the -V4L2 API all capture drivers must support the VIDIOC_CROPCAP ioctl, hence we -rely on camera drivers implementing .cropcap(). If the camera driver does not -support cropping, it may choose to not implement .s_crop(), but to enable -cropping support by the camera host driver at least the .g_crop method must be -implemented. - -User window geometry is kept in .user_width and .user_height fields in struct -soc_camera_device and used by the soc-camera core and host drivers. The core -updates these fields upon successful completion of a .s_fmt() call, but if these -fields change elsewhere, e.g. during .s_crop() processing, the host driver is -responsible for updating them. - -Format conversion ------------------ - -V4L2 distinguishes between pixel formats, as they are stored in memory, and as -they are transferred over a media bus. Soc-camera provides support to -conveniently manage these formats. A table of standard transformations is -maintained by soc-camera core, which describes, what FOURCC pixel format will -be obtained, if a media-bus pixel format is stored in memory according to -certain rules. E.g. if MEDIA_BUS_FMT_YUYV8_2X8 data is sampled with 8 bits per -sample and stored in memory in the little-endian order with no gaps between -bytes, data in memory will represent the V4L2_PIX_FMT_YUYV FOURCC format. These -standard transformations will be used by soc-camera or by camera host drivers to -configure camera drivers to produce the FOURCC format, requested by the user, -using the VIDIOC_S_FMT ioctl(). Apart from those standard format conversions, -host drivers can also provide their own conversion rules by implementing a -.get_formats and, if required, a .put_formats methods. |