Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 66 insertions, 0 deletions

diff --git a/Documentation/networking/smctr.txt b/Documentation/networking/smctr.txt
new file mode 100644
index 000000000000..4c866f5a0ee4
--- /dev/null
+++ b/Documentation/networking/smctr.txt
@@ -0,0 +1,66 @@
+Text File for the SMC TokenCard TokenRing Linux driver (smctr.c).
+        By Jay Schulist <jschlst@samba.org>
+
+The Linux SMC Token Ring driver works with the SMC TokenCard Elite (8115T) 
+ISA and SMC TokenCard Elite/A (8115T/A) MCA adapters.
+
+Latest information on this driver can be obtained on the Linux-SNA WWW site.
+Please point your browser to: http://www.linux-sna.org
+
+This driver is rather simple to use. Select Y to Token Ring adapter support
+in the kernel configuration. A choice for SMC Token Ring adapters will
+appear. This drives supports all SMC ISA/MCA adapters. Choose this
+option. I personally recommend compiling the driver as a module (M), but if you
+you would like to compile it staticly answer Y instead.
+
+This driver supports multiple adapters without the need to load multiple copies
+of the driver. You should be able to load up to 7 adapters without any kernel
+modifications, if you are in need of more please contact the maintainer of this
+driver.
+
+Load the driver either by lilo/loadlin or as a module. When a module using the
+following command will suffice for most:
+
+# modprobe smctr
+smctr.c: v1.00 12/6/99 by jschlst@samba.org
+tr0: SMC TokenCard 8115T at Io 0x300, Irq 10, Rom 0xd8000, Ram 0xcc000.
+
+Now just setup the device via ifconfig and set and routes you may have. After
+this you are ready to start sending some tokens.
+
+Errata:
+1). For anyone wondering where to pick up the SMC adapters please browse
+    to http://www.smc.com
+
+2). If you are the first/only Token Ring Client on a Token Ring LAN, please
+    specify the ringspeed with the ringspeed=[4/16] module option. If no
+    ringspeed is specified the driver will attempt to autodetect the ring
+    speed and/or if the adapter is the first/only station on the ring take
+    the appropriate actions. 
+
+    NOTE: Default ring speed is 16MB UTP.
+
+3). PnP support for this adapter sucks. I recommend hard setting the 
+    IO/MEM/IRQ by the jumpers on the adapter. If this is not possible
+    load the module with the following io=[ioaddr] mem=[mem_addr]
+    irq=[irq_num].
+
+    The following IRQ, IO, and MEM settings are supported.
+
+    IO ports:
+    0x200, 0x220, 0x240, 0x260, 0x280, 0x2A0, 0x2C0, 0x2E0, 0x300,
+    0x320, 0x340, 0x360, 0x380.
+
+    IRQs:
+    2, 3, 4, 5, 7, 8, 9, 10, 11, 12, 13, 14, 15
+
+    Memory addresses:
+    0xA0000, 0xA4000, 0xA8000, 0xAC000, 0xB0000, 0xB4000,
+    0xB8000, 0xBC000, 0xC0000, 0xC4000, 0xC8000, 0xCC000,
+    0xD0000, 0xD4000, 0xD8000, 0xDC000, 0xE0000, 0xE4000,
+    0xE8000, 0xEC000, 0xF0000, 0xF4000, 0xF8000, 0xFC000
+
+This driver is under the GNU General Public License. Its Firmware image is
+included as an initialized C-array and is licensed by SMC to the Linux
+users of this driver. However no warranty about its fitness is expressed or
+implied by SMC.