summaryrefslogtreecommitdiffstats
path: root/Documentation/phy.txt
diff options
context:
space:
mode:
authorKishon Vijay Abraham I <kishon@ti.com>2013-09-27 11:53:25 +0530
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2013-09-27 17:35:41 -0700
commitff764963479a1b18721ab96e531404c50fefe8b1 (patch)
treee696248868cbb6ab2ac2159058c72631b620b136 /Documentation/phy.txt
parent6741448eb01a1844b78c83fa8faf0c95524fc09b (diff)
downloadlinux-ff764963479a1b18721ab96e531404c50fefe8b1.tar.gz
linux-ff764963479a1b18721ab96e531404c50fefe8b1.tar.bz2
linux-ff764963479a1b18721ab96e531404c50fefe8b1.zip
drivers: phy: add generic PHY framework
The PHY framework provides a set of APIs for the PHY drivers to create/destroy a PHY and APIs for the PHY users to obtain a reference to the PHY with or without using phandle. For dt-boot, the PHY drivers should also register *PHY provider* with the framework. PHY drivers should create the PHY by passing id and ops like init, exit, power_on and power_off. This framework is also pm runtime enabled. The documentation for the generic PHY framework is added in Documentation/phy.txt and the documentation for dt binding can be found at Documentation/devicetree/bindings/phy/phy-bindings.txt Cc: Tomasz Figa <t.figa@samsung.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'Documentation/phy.txt')
-rw-r--r--Documentation/phy.txt166
1 files changed, 166 insertions, 0 deletions
diff --git a/Documentation/phy.txt b/Documentation/phy.txt
new file mode 100644
index 000000000000..0103e4b15b0e
--- /dev/null
+++ b/Documentation/phy.txt
@@ -0,0 +1,166 @@
+ PHY SUBSYSTEM
+ Kishon Vijay Abraham I <kishon@ti.com>
+
+This document explains the Generic PHY Framework along with the APIs provided,
+and how-to-use.
+
+1. Introduction
+
+*PHY* is the abbreviation for physical layer. It is used to connect a device
+to the physical medium e.g., the USB controller has a PHY to provide functions
+such as serialization, de-serialization, encoding, decoding and is responsible
+for obtaining the required data transmission rate. Note that some USB
+controllers have PHY functionality embedded into it and others use an external
+PHY. Other peripherals that use PHY include Wireless LAN, Ethernet,
+SATA etc.
+
+The intention of creating this framework is to bring the PHY drivers spread
+all over the Linux kernel to drivers/phy to increase code re-use and for
+better code maintainability.
+
+This framework will be of use only to devices that use external PHY (PHY
+functionality is not embedded within the controller).
+
+2. Registering/Unregistering the PHY provider
+
+PHY provider refers to an entity that implements one or more PHY instances.
+For the simple case where the PHY provider implements only a single instance of
+the PHY, the framework provides its own implementation of of_xlate in
+of_phy_simple_xlate. If the PHY provider implements multiple instances, it
+should provide its own implementation of of_xlate. of_xlate is used only for
+dt boot case.
+
+#define of_phy_provider_register(dev, xlate) \
+ __of_phy_provider_register((dev), THIS_MODULE, (xlate))
+
+#define devm_of_phy_provider_register(dev, xlate) \
+ __devm_of_phy_provider_register((dev), THIS_MODULE, (xlate))
+
+of_phy_provider_register and devm_of_phy_provider_register macros can be used to
+register the phy_provider and it takes device and of_xlate as
+arguments. For the dt boot case, all PHY providers should use one of the above
+2 macros to register the PHY provider.
+
+void devm_of_phy_provider_unregister(struct device *dev,
+ struct phy_provider *phy_provider);
+void of_phy_provider_unregister(struct phy_provider *phy_provider);
+
+devm_of_phy_provider_unregister and of_phy_provider_unregister can be used to
+unregister the PHY.
+
+3. Creating the PHY
+
+The PHY driver should create the PHY in order for other peripheral controllers
+to make use of it. The PHY framework provides 2 APIs to create the PHY.
+
+struct phy *phy_create(struct device *dev, const struct phy_ops *ops,
+ struct phy_init_data *init_data);
+struct phy *devm_phy_create(struct device *dev, const struct phy_ops *ops,
+ struct phy_init_data *init_data);
+
+The PHY drivers can use one of the above 2 APIs to create the PHY by passing
+the device pointer, phy ops and init_data.
+phy_ops is a set of function pointers for performing PHY operations such as
+init, exit, power_on and power_off. *init_data* is mandatory to get a reference
+to the PHY in the case of non-dt boot. See section *Board File Initialization*
+on how init_data should be used.
+
+Inorder to dereference the private data (in phy_ops), the phy provider driver
+can use phy_set_drvdata() after creating the PHY and use phy_get_drvdata() in
+phy_ops to get back the private data.
+
+4. Getting a reference to the PHY
+
+Before the controller can make use of the PHY, it has to get a reference to
+it. This framework provides the following APIs to get a reference to the PHY.
+
+struct phy *phy_get(struct device *dev, const char *string);
+struct phy *devm_phy_get(struct device *dev, const char *string);
+
+phy_get and devm_phy_get can be used to get the PHY. In the case of dt boot,
+the string arguments should contain the phy name as given in the dt data and
+in the case of non-dt boot, it should contain the label of the PHY.
+The only difference between the two APIs is that devm_phy_get associates the
+device with the PHY using devres on successful PHY get. On driver detach,
+release function is invoked on the the devres data and devres data is freed.
+
+5. Releasing a reference to the PHY
+
+When the controller no longer needs the PHY, it has to release the reference
+to the PHY it has obtained using the APIs mentioned in the above section. The
+PHY framework provides 2 APIs to release a reference to the PHY.
+
+void phy_put(struct phy *phy);
+void devm_phy_put(struct device *dev, struct phy *phy);
+
+Both these APIs are used to release a reference to the PHY and devm_phy_put
+destroys the devres associated with this PHY.
+
+6. Destroying the PHY
+
+When the driver that created the PHY is unloaded, it should destroy the PHY it
+created using one of the following 2 APIs.
+
+void phy_destroy(struct phy *phy);
+void devm_phy_destroy(struct device *dev, struct phy *phy);
+
+Both these APIs destroy the PHY and devm_phy_destroy destroys the devres
+associated with this PHY.
+
+7. PM Runtime
+
+This subsystem is pm runtime enabled. So while creating the PHY,
+pm_runtime_enable of the phy device created by this subsystem is called and
+while destroying the PHY, pm_runtime_disable is called. Note that the phy
+device created by this subsystem will be a child of the device that calls
+phy_create (PHY provider device).
+
+So pm_runtime_get_sync of the phy_device created by this subsystem will invoke
+pm_runtime_get_sync of PHY provider device because of parent-child relationship.
+It should also be noted that phy_power_on and phy_power_off performs
+phy_pm_runtime_get_sync and phy_pm_runtime_put respectively.
+There are exported APIs like phy_pm_runtime_get, phy_pm_runtime_get_sync,
+phy_pm_runtime_put, phy_pm_runtime_put_sync, phy_pm_runtime_allow and
+phy_pm_runtime_forbid for performing PM operations.
+
+8. Board File Initialization
+
+Certain board file initialization is necessary in order to get a reference
+to the PHY in the case of non-dt boot.
+Say we have a single device that implements 3 PHYs that of USB, SATA and PCIe,
+then in the board file the following initialization should be done.
+
+struct phy_consumer consumers[] = {
+ PHY_CONSUMER("dwc3.0", "usb"),
+ PHY_CONSUMER("pcie.0", "pcie"),
+ PHY_CONSUMER("sata.0", "sata"),
+};
+PHY_CONSUMER takes 2 parameters, first is the device name of the controller
+(PHY consumer) and second is the port name.
+
+struct phy_init_data init_data = {
+ .consumers = consumers,
+ .num_consumers = ARRAY_SIZE(consumers),
+};
+
+static const struct platform_device pipe3_phy_dev = {
+ .name = "pipe3-phy",
+ .id = -1,
+ .dev = {
+ .platform_data = {
+ .init_data = &init_data,
+ },
+ },
+};
+
+then, while doing phy_create, the PHY driver should pass this init_data
+ phy_create(dev, ops, pdata->init_data);
+
+and the controller driver (phy consumer) should pass the port name along with
+the device to get a reference to the PHY
+ phy_get(dev, "pcie");
+
+9. DeviceTree Binding
+
+The documentation for PHY dt binding can be found @
+Documentation/devicetree/bindings/phy/phy-bindings.txt