summaryrefslogtreecommitdiffstats
path: root/Documentation/scsi
diff options
context:
space:
mode:
authorChristoph Hellwig <hch@lst.de>2014-11-05 10:36:28 +0100
committerChristoph Hellwig <hch@lst.de>2014-11-27 16:40:24 +0100
commit79855d178557cc3e3ffd179fd26a64cef48dfb30 (patch)
tree316621212e058975d86cef255e9ec86f70d0deb0 /Documentation/scsi
parent309e7cc433e79ba0124e7e359503e66c41b46509 (diff)
downloadlinux-79855d178557cc3e3ffd179fd26a64cef48dfb30.tar.gz
linux-79855d178557cc3e3ffd179fd26a64cef48dfb30.tar.bz2
linux-79855d178557cc3e3ffd179fd26a64cef48dfb30.zip
libsas: remove task_collector mode
The task_collector mode (or "latency_injector", (C) Dan Willians) is an optional I/O path in libsas that queues up scsi commands instead of directly sending it to the hardware. It generall increases latencies to in the optiomal case slightly reduce mmio traffic to the hardware. Only the obsolete aic94xx driver and the mvsas driver allowed to use it without recompiling the kernel, and most drivers didn't support it at all. Remove the giant blob of code to allow better optimizations for scsi-mq in the future. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Dan Williams <dan.j.williams@intel.com>
Diffstat (limited to 'Documentation/scsi')
-rw-r--r--Documentation/scsi/libsas.txt82
1 files changed, 4 insertions, 78 deletions
diff --git a/Documentation/scsi/libsas.txt b/Documentation/scsi/libsas.txt
index 3cc9c7843e15..8cac6492aade 100644
--- a/Documentation/scsi/libsas.txt
+++ b/Documentation/scsi/libsas.txt
@@ -226,9 +226,6 @@ static int register_sas_ha(struct my_sas_ha *my_ha)
my_ha->sas_ha.lldd_dev_found = my_dev_found;
my_ha->sas_ha.lldd_dev_gone = my_dev_gone;
- my_ha->sas_ha.lldd_max_execute_num = lldd_max_execute_num; (1)
-
- my_ha->sas_ha.lldd_queue_size = ha_can_queue;
my_ha->sas_ha.lldd_execute_task = my_execute_task;
my_ha->sas_ha.lldd_abort_task = my_abort_task;
@@ -247,28 +244,6 @@ static int register_sas_ha(struct my_sas_ha *my_ha)
return sas_register_ha(&my_ha->sas_ha);
}
-(1) This is normally a LLDD parameter, something of the
-lines of a task collector. What it tells the SAS Layer is
-whether the SAS layer should run in Direct Mode (default:
-value 0 or 1) or Task Collector Mode (value greater than 1).
-
-In Direct Mode, the SAS Layer calls Execute Task as soon as
-it has a command to send to the SDS, _and_ this is a single
-command, i.e. not linked.
-
-Some hardware (e.g. aic94xx) has the capability to DMA more
-than one task at a time (interrupt) from host memory. Task
-Collector Mode is an optional feature for HAs which support
-this in their hardware. (Again, it is completely optional
-even if your hardware supports it.)
-
-In Task Collector Mode, the SAS Layer would do _natural_
-coalescing of tasks and at the appropriate moment it would
-call your driver to DMA more than one task in a single HA
-interrupt. DMBS may want to use this by insmod/modprobe
-setting the lldd_max_execute_num to something greater than
-1.
-
(2) SAS 1.1 does not define I_T Nexus Reset TMF.
Events
@@ -325,71 +300,22 @@ PHYE_SPINUP_HOLD -- SATA is present, COMWAKE not sent.
The Execute Command SCSI RPC:
- int (*lldd_execute_task)(struct sas_task *, int num,
- unsigned long gfp_flags);
+ int (*lldd_execute_task)(struct sas_task *, gfp_t gfp_flags);
-Used to queue a task to the SAS LLDD. @task is the tasks to
-be executed. @num should be the number of tasks being
-queued at this function call (they are linked listed via
-task::list), @gfp_mask should be the gfp_mask defining the
-context of the caller.
+Used to queue a task to the SAS LLDD. @task is the task to be executed.
+@gfp_mask is the gfp_mask defining the context of the caller.
This function should implement the Execute Command SCSI RPC,
-or if you're sending a SCSI Task as linked commands, you
-should also use this function.
-That is, when lldd_execute_task() is called, the command(s)
+That is, when lldd_execute_task() is called, the command
go out on the transport *immediately*. There is *no*
queuing of any sort and at any level in a SAS LLDD.
-The use of task::list is two-fold, one for linked commands,
-the other discussed below.
-
-It is possible to queue up more than one task at a time, by
-initializing the list element of struct sas_task, and
-passing the number of tasks enlisted in this manner in num.
-
Returns: -SAS_QUEUE_FULL, -ENOMEM, nothing was queued;
0, the task(s) were queued.
-If you want to pass num > 1, then either
-A) you're the only caller of this function and keep track
- of what you've queued to the LLDD, or
-B) you know what you're doing and have a strategy of
- retrying.
-
-As opposed to queuing one task at a time (function call),
-batch queuing of tasks, by having num > 1, greatly
-simplifies LLDD code, sequencer code, and _hardware design_,
-and has some performance advantages in certain situations
-(DBMS).
-
-The LLDD advertises if it can take more than one command at
-a time at lldd_execute_task(), by setting the
-lldd_max_execute_num parameter (controlled by "collector"
-module parameter in aic94xx SAS LLDD).
-
-You should leave this to the default 1, unless you know what
-you're doing.
-
-This is a function of the LLDD, to which the SAS layer can
-cater to.
-
-int lldd_queue_size
- The host adapter's queue size. This is the maximum
-number of commands the lldd can have pending to domain
-devices on behalf of all upper layers submitting through
-lldd_execute_task().
-
-You really want to set this to something (much) larger than
-1.
-
-This _really_ has absolutely nothing to do with queuing.
-There is no queuing in SAS LLDDs.
-
struct sas_task {
dev -- the device this task is destined to
- list -- must be initialized (INIT_LIST_HEAD)
task_proto -- _one_ of enum sas_proto
scatter -- pointer to scatter gather list array
num_scatter -- number of elements in scatter