summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2008-10-30 16:16:39 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2008-10-30 16:16:39 -0700
commit7105212bd309752b589a3ba816afdd7fed190b85 (patch)
tree812d86441f8ba375f04c38c569908bd3f61e1c26 /Documentation
parent65fc716fa673cf98fb5887180fd3c52ca0371198 (diff)
parentb73b925a6b9d69478c6ae4e74ef20607fd24aeaa (diff)
downloadlinux-7105212bd309752b589a3ba816afdd7fed190b85.tar.gz
linux-7105212bd309752b589a3ba816afdd7fed190b85.tar.bz2
linux-7105212bd309752b589a3ba816afdd7fed190b85.zip
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5326/1: AFEB9260: Fix for i2c_board_info structure [ARM] mx31ads: Add missing include [ARM] MXC: Fix mxc_gpio_get(), which must read PSR register instead DR. [ARM] MX3: Use ioremap wrapper to map SoC devices nonshared [ARM] gpio_free might sleep, arm architecture [ARM] ep93xx: fix OHCI DMA mask leds: da903x: (da9030 only) led brightness reversed. [ARM] sharpsl_pm: fix compilation w/o CONFIG_PM [ARM] pcm037: map AIPS1 and AIPS2 as nonshared area [ARM] build fixes for netX serial driver [ARM] 5323/1: Remove outdated empeg documentation. [ARM] 5299/1: Add maintainer for Mobilepro 900/c [ARM] corgi_lcd: fix simultaneous compilation with corgi_bl [ARM] pxa/spitz: fix spi cs on spitz [ARM] 5322/1: Fix fastpath issue in mmci.c [ARM] xsc3: revert writethrough memory-type encoding change
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/arm/empeg/README13
-rw-r--r--Documentation/arm/empeg/ir.txt49
-rw-r--r--Documentation/arm/empeg/mkdevs11
3 files changed, 0 insertions, 73 deletions
diff --git a/Documentation/arm/empeg/README b/Documentation/arm/empeg/README
deleted file mode 100644
index 09cc8d03ae58..000000000000
--- a/Documentation/arm/empeg/README
+++ /dev/null
@@ -1,13 +0,0 @@
-Empeg, Ltd's Empeg MP3 Car Audio Player
-
-The initial design is to go in your car, but you can use it at home, on a
-boat... almost anywhere. The principle is to store CD-quality music using
-MPEG technology onto a hard disk in the unit, and use the power of the
-embedded computer to serve up the music you want.
-
-For more details, see:
-
- http://www.empeg.com
-
-
-
diff --git a/Documentation/arm/empeg/ir.txt b/Documentation/arm/empeg/ir.txt
deleted file mode 100644
index 10a297450164..000000000000
--- a/Documentation/arm/empeg/ir.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Infra-red driver documentation.
-
-Mike Crowe <mac@empeg.com>
-(C) Empeg Ltd 1999
-
-Not a lot here yet :-)
-
-The Kenwood KCA-R6A remote control generates a sequence like the following:
-
-Go low for approx 16T (Around 9000us)
-Go high for approx 8T (Around 4000us)
-Go low for less than 2T (Around 750us)
-
-For each of the 32 bits
- Go high for more than 2T (Around 1500us) == 1
- Go high for less than T (Around 400us) == 0
- Go low for less than 2T (Around 750us)
-
-Rather than repeat a signal when the button is held down certain buttons
-generate the following code to indicate repetition.
-
-Go low for approx 16T
-Go high for approx 4T
-Go low for less than 2T
-
-(By removing the <2T from the start of the sequence and placing at the end
- it can be considered a stop bit but I found it easier to deal with it at
- the start).
-
-The 32 bits are encoded as XxYy where x and y are the actual data values
-while X and Y are the logical inverses of the associated data values. Using
-LSB first yields sensible codes for the numbers.
-
-All codes are of the form b9xx
-
-The numeric keys generate the code 0x where x is the number pressed.
-
-Tuner 1c
-Tape 1d
-CD 1e
-CD-MD-CH 1f
-Track- 0a
-Track+ 0b
-Rewind 0c
-FF 0d
-DNPP 5e
-Play/Pause 0e
-Vol+ 14
-Vol- 15
diff --git a/Documentation/arm/empeg/mkdevs b/Documentation/arm/empeg/mkdevs
deleted file mode 100644
index 7a85e28d14f3..000000000000
--- a/Documentation/arm/empeg/mkdevs
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/sh
-mknod /dev/display c 244 0
-mknod /dev/ir c 242 0
-mknod /dev/usb0 c 243 0
-mknod /dev/audio c 245 4
-mknod /dev/dsp c 245 3
-mknod /dev/mixer c 245 0
-mknod /dev/empeg_state c 246 0
-mknod /dev/radio0 c 81 64
-ln -sf radio0 radio
-ln -sf usb0 usb