Merge branch 'imx/dt/for-3.5' of git://git.linaro.org/people/shawnguo/linux-2.6.git into next/dt2

Shawn Guo <shawn.guo@linaro.org> writes:

  I chose to base it on Sascha's imx-common-clk series than -rc, because
  otherwise it will keep patching clock file that has been removed by
  imx-common-clk series.  It also depends on imx-pinctrl pull-request
  I just sent to be functional.

  Note: when imx-common-clk and imx-pinctrl get merged together, the
  following files will have conflicts.  But the conflicts should not be
  so hard to resolve.

[arnd: resolved those merge conflicts by pulling pinctrl branch]

* imx/dt: (24 commits)
  ARM: dts: imx53-qsb: enable audio support
  ARM: dts: imx51-babbage: enable audio support
  ARM: imx: add audio codec clk lookup for imx53-qsb
  ARM: imx: add audmux pad setting for imx51-babbage
  ARM: imx: add more imx5 ssi clocks
  ARM: dts: imx53-qsb: Add Dialog DA9053 PMIC support
  ARM: dts: imx6q-sabrelite: add serial2 pinctrl support
  ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000
  ARM: imx6q_sabrelite: clk_register_clkdev cko1 for sgtl5000
  ARM: imx6q: add ssi1_ipg clk_lookup
  ARM: dts: imx6q-sabrelite: add audmux pinctrl support
  ARM: dts: imx6q-sabrelite: add i2c1 pinctrl support
  ARM: dts: imx6q-sabrelite: add audmux device
  ARM: dts: imx6q-sabrelite: add ssi device
  ARM: dts: imx6q-arm2: add pinctrl state for usdhc
  ARM: imx6: Add UART2 for low-level debug
  ARM: imx6q: register phy fixup only when CONFIG_PHYLIB is enabled
  ARM: imx6q: move imx6q_sabrelite specific code to a dedicated function
  ARM: dts: imx6q-sabrelite: Add SPI NOR support
  ARM: dts: Add basic support for imx6q-sabresd
  ...

Pulls in imx/pinctrl and imx/clock as dependencies.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

3 files changed, 6 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index 1708df5a8737..ac9e7516756e 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -37,6 +37,10 @@ i.MX6 Quad SABRE Lite Board
 Required root node properties:
     - compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
 
+i.MX6 Quad SABRE Smart Device Board
+Required root node properties:
+    - compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
+
 Generic i.MX boards
 -------------------
 
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index de439517dff0..7ab9e1a2d8be 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -14,7 +14,7 @@ Optional properties:
 
 Example:
 
-fec@83fec000 {
+ethernet@83fec000 {
 	compatible = "fsl,imx51-fec", "fsl,imx27-fec";
 	reg = <0x83fec000 0x4000>;
 	interrupts = <87>;
diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
index a9c0406280e8..b462d0c54823 100644
--- a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
+++ b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
@@ -11,7 +11,7 @@ Optional properties:
 
 Example:
 
-uart@73fbc000 {
+serial@73fbc000 {
 	compatible = "fsl,imx51-uart", "fsl,imx21-uart";
 	reg = <0x73fbc000 0x4000>;
 	interrupts = <31>;